diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-05-09 10:15:46 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-05-09 10:15:46 -0700 |
| commit | a637b0d45947df686979b85361ad5bfa9d19fdd3 (patch) | |
| tree | 926207cdfbbde430d1e7b515f32fe1c740b15745 /drivers/mtd/nand | |
| parent | f78089e87e576f91396a5d428d14b552178dfb17 (diff) | |
| parent | cdb6404cc53a166a1e3b0179bd8d1f4070beff41 (diff) | |
Merge tag 'for-linus-20130509' of git://git.infradead.org/linux-mtd
Pull MTD update from David Woodhouse:
- Lots of cleanups from Artem, including deletion of some obsolete
drivers
- Support partitions larger than 4GiB in device tree
- Support for new SPI chips
* tag 'for-linus-20130509' of git://git.infradead.org/linux-mtd: (83 commits)
mtd: omap2: Use module_platform_driver()
mtd: bf5xx_nand: Use module_platform_driver()
mtd: denali_dt: Remove redundant use of of_match_ptr
mtd: denali_dt: Change return value to fix smatch warning
mtd: denali_dt: Use module_platform_driver()
mtd: denali_dt: Fix incorrect error check
mtd: nand: subpage write support for hardware based ECC schemes
mtd: omap2: use msecs_to_jiffies()
mtd: nand_ids: use size macros
mtd: nand_ids: improve LEGACY_ID_NAND macro a bit
mtd: add 4 Toshiba nand chips for the full-id case
mtd: add the support to parse out the full-id nand type
mtd: add new fields to nand_flash_dev{}
mtd: sh_flctl: Use of_match_ptr() macro
mtd: gpio: Use of_match_ptr() macro
mtd: gpio: Use devm_kzalloc()
mtd: davinci_nand: Use of_match_ptr()
mtd: dataflash: Use of_match_ptr() macro
mtd: remove h720x flash support
mtd: onenand: remove OneNAND simulator
...
Diffstat (limited to 'drivers/mtd/nand')
25 files changed, 300 insertions, 1688 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 5d54ad32697f..a60f6c17f57b 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -41,14 +41,6 @@ config MTD_SM_COMMON tristate default n -config MTD_NAND_MUSEUM_IDS - bool "Enable chip ids for obsolete ancient NAND devices" - default n - help - Enable this option only when your board has first generation - NAND chips (page size 256 byte, erase size 4-8KiB). The IDs - of these chips were reused by later, larger chips. - config MTD_NAND_DENALI tristate "Support Denali NAND controller" help @@ -81,12 +73,6 @@ config MTD_NAND_DENALI_SCRATCH_REG_ADDR scratch register here to enable this feature. On Intel Moorestown boards, the scratch register is at 0xFF108018. -config MTD_NAND_H1900 - tristate "iPAQ H1900 flash" - depends on ARCH_PXA && BROKEN - help - This enables the driver for the iPAQ h1900 flash. - config MTD_NAND_GPIO tristate "GPIO NAND Flash driver" depends on GPIOLIB && ARM @@ -201,22 +187,6 @@ config MTD_NAND_BF5XX_BOOTROM_ECC If unsure, say N. -config MTD_NAND_RTC_FROM4 - tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)" - depends on SH_SOLUTION_ENGINE - select REED_SOLOMON - select REED_SOLOMON_DEC8 - select BITREVERSE - help - This enables the driver for the Renesas Technology AG-AND - flash interface board (FROM_BOARD4) - -config MTD_NAND_PPCHAMELEONEVB - tristate "NAND Flash device on PPChameleonEVB board" - depends on PPCHAMELEONEVB && BROKEN - help - This enables the NAND flash driver on the PPChameleon EVB Board. - config MTD_NAND_S3C2410 tristate "NAND Flash support for Samsung S3C SoCs" depends on ARCH_S3C24XX || ARCH_S3C64XX diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index d76d91205691..bb8189172f62 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -15,14 +15,11 @@ obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o -obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB) += ppchameleonevb.o obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o obj-$(CONFIG_MTD_NAND_DAVINCI) += davinci_nand.o obj-$(CONFIG_MTD_NAND_DISKONCHIP) += diskonchip.o obj-$(CONFIG_MTD_NAND_DOCG4) += docg4.o obj-$(CONFIG_MTD_NAND_FSMC) += fsmc_nand.o -obj-$(CONFIG_MTD_NAND_H1900) += h1910.o -obj-$(CONFIG_MTD_NAND_RTC_FROM4) += rtc_from4.o obj-$(CONFIG_MTD_NAND_SHARPSL) += sharpsl.o obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index ffcbcca2fd2d..2d23d2929438 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -1737,20 +1737,7 @@ static struct platform_driver atmel_nand_driver = { }, }; -static int __init atmel_nand_init(void) -{ - return platform_driver_probe(&atmel_nand_driver, atmel_nand_probe); -} - - -static void __exit atmel_nand_exit(void) -{ - platform_driver_unregister(&atmel_nand_driver); -} - - -module_init(atmel_nand_init); -module_exit(atmel_nand_exit); +module_platform_driver_probe(atmel_nand_driver, atmel_nand_probe); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Rick Bronson"); diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index 4271e948d1e2..776df3694f75 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -874,21 +874,7 @@ static struct platform_driver bf5xx_nand_driver = { }, }; -static int __init bf5xx_nand_init(void) -{ - printk(KERN_INFO "%s, Version %s (c) 2007 Analog Devices, Inc.\n", - DRV_DESC, DRV_VERSION); - - return platform_driver_register(&bf5xx_nand_driver); -} - -static void __exit bf5xx_nand_exit(void) -{ - platform_driver_unregister(&bf5xx_nand_driver); -} - -module_init(bf5xx_nand_init); -module_exit(bf5xx_nand_exit); +module_platform_driver(bf5xx_nand_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR(DRV_AUTHOR); diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index 010d61266536..c34985a55101 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -303,13 +303,7 @@ static void cafe_nand_cmdfunc(struct mtd_info *mtd, unsigned command, case NAND_CMD_SEQIN: case NAND_CMD_RNDIN: case NAND_CMD_STATUS: - case NAND_CMD_DEPLETE1: case NAND_CMD_RNDOUT: - case NAND_CMD_STATUS_ERROR: - case NAND_CMD_STATUS_ERROR0: - case NAND_CMD_STATUS_ERROR1: - case NAND_CMD_STATUS_ERROR2: - case NAND_CMD_STATUS_ERROR3: cafe_writel(cafe, cafe->ctl2, NAND_CTRL2); return; } @@ -536,8 +530,8 @@ static int cafe_nand_write_page_lowlevel(struct mtd_info *mtd, } static int cafe_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int oob_required, int page, - int cached, int raw) + uint32_t offset, int data_len, const uint8_t *buf, + int oob_required, int page, int cached, int raw) { int status; diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 94e17af8e450..c3e15a558173 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -34,6 +34,7 @@ #include <linux/mtd/partitions.h> #include <linux/slab.h> #include <linux/of_device.h> +#include <linux/of.h> #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/mtd-davinci-aemif.h> @@ -577,7 +578,6 @@ static struct davinci_nand_pdata return pdev->dev.platform_data; } #else -#define davinci_nand_of_match NULL static struct davinci_nand_pdata *nand_davinci_get_pdata(struct platform_device *pdev) { @@ -878,22 +878,12 @@ static struct platform_driver nand_davinci_driver = { .driver = { .name = "davinci_nand", .owner = THIS_MODULE, - .of_match_table = davinci_nand_of_match, + .of_match_table = of_match_ptr(davinci_nand_of_match), }, }; MODULE_ALIAS("platform:davinci_nand"); -static int __init nand_davinci_init(void) -{ - return platform_driver_probe(&nand_davinci_driver, nand_davinci_probe); -} -module_init(nand_davinci_init); - -static void __exit nand_davinci_exit(void) -{ - platform_driver_unregister(&nand_davinci_driver); -} -module_exit(nand_davinci_exit); +module_platform_driver_probe(nand_davinci_driver, nand_davinci_probe); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Texas Instruments"); diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c index 546f8cb5688d..92530244e2cb 100644 --- a/drivers/mtd/nand/denali_dt.c +++ b/drivers/mtd/nand/denali_dt.c @@ -42,7 +42,7 @@ static void __iomem *request_and_map(struct device *dev, } ptr = devm_ioremap_nocache(dev, res->start, resource_size(res)); - if (!res) + if (!ptr) dev_err(dev, "ioremap_nocache of %s failed!", res->name); return ptr; @@ -90,7 +90,7 @@ static int denali_dt_probe(struct platform_device *ofdev) denali->irq = platform_get_irq(ofdev, 0); if (denali->irq < 0) { dev_err(&ofdev->dev, "no irq defined\n"); - return -ENXIO; + return denali->irq; } denali->flash_reg = request_and_map(&ofdev->dev, denali_reg); @@ -146,21 +146,11 @@ static struct platform_driver denali_dt_driver = { .driver = { .name = "denali-nand-dt", .owner = THIS_MODULE, - .of_match_table = of_match_ptr(denali_nand_dt_ids), + .of_match_table = denali_nand_dt_ids, }, }; -static int __init denali_init_dt(void) -{ - return platform_driver_register(&denali_dt_driver); -} -module_init(denali_init_dt); - -static void __exit denali_exit_dt(void) -{ - platform_driver_unregister(&denali_dt_driver); -} -module_exit(denali_exit_dt); +module_platform_driver(denali_dt_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Jamie Iles"); diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c index 18fa4489e52e..fa25e7a08134 100644 --- a/drivers/mtd/nand/docg4.c +++ b/drivers/mtd/nand/docg4.c @@ -1397,18 +1397,7 @@ static struct platform_driver docg4_driver = { .remove = __exit_p(cleanup_docg4), }; -static int __init docg4_init(void) -{ - return platform_driver_probe(&docg4_driver, probe_docg4); -} - -static void __exit docg4_exit(void) -{ - platform_driver_unregister(&docg4_driver); -} - -module_init(docg4_init); -module_exit(docg4_exit); +module_platform_driver_probe(docg4_driver, probe_docg4); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Mike Dunn"); diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index 05ba3f0c2d19..911e2433fe30 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -1235,18 +1235,7 @@ static struct platform_driver fsmc_nand_driver = { }, }; -static int __init fsmc_nand_init(void) -{ - return platform_driver_probe(&fsmc_nand_driver, - fsmc_nand_probe); -} -module_init(fsmc_nand_init); - -static void __exit fsmc_nand_exit(void) -{ - platform_driver_unregister(&fsmc_nand_driver); -} -module_exit(fsmc_nand_exit); +module_platform_driver_probe(fsmc_nand_driver, fsmc_nand_probe); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Vipin Kumar <vipin.kumar@st.com>, Ashish Priyadarshi"); diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c index e789e3f51710..89065dd83d64 100644 --- a/drivers/mtd/nand/gpio.c +++ b/drivers/mtd/nand/gpio.c @@ -190,7 +190,6 @@ static struct resource *gpio_nand_get_io_sync_of(struct platform_device *pdev) return r; } #else /* CONFIG_OF */ -#define gpio_nand_id_table NULL static inline int gpio_nand_get_config_of(const struct device *dev, struct gpio_nand_platdata *plat) { @@ -259,8 +258,6 @@ static int gpio_nand_remove(struct platform_device *dev) if (gpio_is_valid(gpiomtd->plat.gpio_rdy)) gpio_free(gpiomtd->plat.gpio_rdy); - kfree(gpiomtd); - return 0; } @@ -297,7 +294,7 @@ static int gpio_nand_probe(struct platform_device *dev) if (!res0) return -EINVAL; - gpiomtd = kzalloc(sizeof(*gpiomtd), GFP_KERNEL); + gpiomtd = devm_kzalloc(&dev->dev, sizeof(*gpiomtd), GFP_KERNEL); if (gpiomtd == NULL) { dev_err(&dev->dev, "failed to create NAND MTD\n"); return -ENOMEM; @@ -412,7 +409,6 @@ err_sync: iounmap(gpiomtd->nand_chip.IO_ADDR_R); release_mem_region(res0->start, resource_size(res0)); err_map: - kfree(gpiomtd); return ret; } @@ -421,7 +417,7 @@ static struct platform_driver gpio_nand_driver = { .remove = gpio_nand_remove, .driver = { .name = "gpio-nand", - .of_match_table = gpio_nand_id_table, + .of_match_table = of_match_ptr(gpio_nand_id_table), }, }; diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c deleted file mode 100644 index 50166e93ba96..000000000000 --- a/drivers/mtd/nand/h1910.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * drivers/mtd/nand/h1910.c - * - * Copyright (C) 2003 Joshua Wise (joshua@joshuawise.com) - * - * Derived from drivers/mtd/nand/edb7312.c - * Copyright (C) 2002 Marius Gröger (mag@sysgo.de) - * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Overview: - * This is a device driver for the NAND flash device found on the - * iPAQ h1910 board which utilizes the Samsung K9F2808 part. This is - * a 128Mibit (16MiB x 8 bits) NAND flash device. - */ - -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> -#include <asm/io.h> -#include <mach/hardware.h> -#include <asm/sizes.h> -#include <mach/h1900-gpio.h> -#include <mach/ipaq.h> - -/* - * MTD structure for EDB7312 board - */ -static struct mtd_info *h1910_nand_mtd = NULL; - -/* - * Module stuff - */ - -/* - * Define static partitions for flash device - */ -static struct mtd_partition partition_info[] = { - {name:"h1910 NAND Flash", - offset:0, - size:16 * 1024 * 1024} -}; - -#define NUM_PARTITIONS 1 - -/* - * hardware specific access to control-lines - * - * NAND_NCE: bit 0 - don't care - * NAND_CLE: bit 1 - address bit 2 - * NAND_ALE: bit 2 - address bit 3 - */ -static void h1910_hwcontrol(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - struct nand_chip *chip = mtd->priv; - - if (cmd != NAND_CMD_NONE) - writeb(cmd, chip->IO_ADDR_W | ((ctrl & 0x6) << 1)); -} - -/* - * read device ready pin - */ -#if 0 -static int h1910_device_ready(struct mtd_info *mtd) -{ - return (GPLR(55) & GPIO_bit(55)); -} -#endif - -/* - * Main initialization routine - */ -static int __init h1910_init(void) -{ - struct nand_chip *this; - void __iomem *nandaddr; - - if (!machine_is_h1900()) - return -ENODEV; - - nandaddr = ioremap(0x08000000, 0x1000); - if (!nandaddr) { - printk("Failed to ioremap nand flash.\n"); - return -ENOMEM; - } - - /* Allocate memory for MTD device structure and private data */ - h1910_nand_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); - if (!h1910_nand_mtd) { - printk("Unable to allocate h1910 NAND MTD device structure.\n"); - iounmap((void *)nandaddr); - return -ENOMEM; - } - - /* Get pointer to private data */ - this = (struct nand_chip *)(&h1910_nand_mtd[1]); - - /* Initialize structures */ - memset(h1910_nand_mtd, 0, sizeof(struct mtd_info)); - memset(this, 0, sizeof(struct nand_chip)); - - /* Link the private data with the MTD structure */ - h1910_nand_mtd->priv = this; - h1910_nand_mtd->owner = THIS_MODULE; - - /* - * Enable VPEN - */ - GPSR(37) = GPIO_bit(37); - - /* insert callbacks */ - this->IO_ADDR_R = nandaddr; - this->IO_ADDR_W = nandaddr; - this->cmd_ctrl = h1910_hwcontrol; - this->dev_ready = NULL; /* unknown whether that was correct or not so we will just do it like this */ - /* 15 us command delay time */ - this->chip_delay = 50; - this->ecc.mode = NAND_ECC_SOFT; - - /* Scan to find existence of the device */ - if (nand_scan(h1910_nand_mtd, 1)) { - printk(KERN_NOTICE "No NAND device - returning -ENXIO\n"); - kfree(h1910_nand_mtd); - iounmap((void *)nandaddr); - return -ENXIO; - } - - /* Register the partitions */ - mtd_device_parse_register(h1910_nand_mtd, NULL, NULL, partition_info, - NUM_PARTITIONS); - - /* Return happy */ - return 0; -} - -module_init(h1910_init); - -/* - * Clean up routine - */ -static void __exit h1910_cleanup(void) -{ - struct nand_chip *this = (struct nand_chip *)&h1910_nand_mtd[1]; - - /* Release resources, unregister device */ - nand_release(h1910_nand_mtd); - - /* Release io resource */ - iounmap((void *)this->IO_ADDR_W); - - /* Free the MTD device structure */ - kfree(h1910_nand_mtd); -} - -module_exit(h1910_cleanup); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Joshua Wise <joshua at joshuawise dot com>"); -MODULE_DESCRIPTION("NAND flash driver for iPAQ h1910"); diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c index 0ca22ae9135c..a94facb46e5c 100644 --- a/drivers/mtd/nand/lpc32xx_mlc.c +++ b/drivers/mtd/nand/lpc32xx_mlc.c @@ -540,8 +540,8 @@ static int lpc32xx_write_page_lowlevel(struct mtd_info *mtd, } static int lpc32xx_write_page(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int oob_required, int page, - int cached, int raw) + uint32_t offset, int data_len, const uint8_t *buf, + int oob_required, int page, int cached, int raw) { int res; diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 42c63927609d..dfcd0a565c5b 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -4,7 +4,6 @@ * Overview: * This is the generic MTD driver for NAND flash devices. It should be * capable of working with almost all NAND chips currently available. - * Basic support for AG-AND chips is provided. * * Additional technical information is available on * http://www.linux-mtd.infradead.org/doc/nand.html @@ -22,8 +21,6 @@ * Enable cached programming for 2k page size chips * Check, if mtd->ecctype should be set to MTD_ECC_HW * if we have HW ECC support. - * The AG-AND chips have nice features for speed improvement, - * which are not supported yet. Read / program 4 pages in one go. * BBT table is not serialized, has to be fixed * * This program is free software; you can redistribute it and/or modify @@ -515,7 +512,7 @@ EXPORT_SYMBOL_GPL(nand_wait_ready); * @page_addr: the page address for this command, -1 if none * * Send command to NAND device. This function is used for small page devices - * (256/512 Bytes per page). + * (512 Bytes per page). */ static void nand_command(struct mtd_info *mtd, unsigned int command, int column, int page_addr) @@ -631,8 +628,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command, } /* Command latch cycle */ - chip->cmd_ctrl(mtd, command & 0xff, - NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); + chip->cmd_ctrl(mtd, command, NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); if (column != -1 || page_addr != -1) { int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE; @@ -671,16 +667,6 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command, case NAND_CMD_SEQIN: case NAND_CMD_RNDIN: case NAND_CMD_STATUS: - case NAND_CMD_DEPLETE1: - return; - - case NAND_CMD_STATUS_ERROR: - case NAND_CMD_STATUS_ERROR0: - case NAND_CMD_STATUS_ERROR1: - case NAND_CMD_STATUS_ERROR2: - case NAND_CMD_STATUS_ERROR3: - /* Read error status commands require only a short delay */ - udelay(chip->chip_delay); return; case NAND_CMD_RESET: @@ -836,10 +822,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) */ ndelay(100); - if ((state == FL_ERASING) && (chip->options & NAND_IS_AND)) - chip->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1); - else - chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); + chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); if (in_interrupt() || oops_in_progress) panic_nand_wait(mtd, chip, timeo); @@ -1127,7 +1110,7 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, } /** - * nand_read_subpage - [REPLACEABLE] software ECC based sub-page read function + * nand_read_subpage - [REPLACEABLE] ECC based sub-page read function * @mtd: mtd info structure * @chip: nand chip info structure * @data_offs: offset of requested data within the page @@ -1995,6 +1978,67 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, return 0; } + +/** + * nand_write_subpage_hwecc - [REPLACABLE] hardware ECC based subpage write + * @mtd: mtd info structure + * @chip: nand chip info structure + * @column: column address of subpage within the page + * @data_len: data length + * @oob_required: must write chip->oob_poi to OOB + */ +static int nand_write_subpage_hwecc(struct mtd_info *mtd, + struct nand_chip *chip, uint32_t offset, + uint32_t data_len, const uint8_t *data_buf, + int oob_required) +{ + uint8_t *oob_buf = chip->oob_poi; + uint8_t *ecc_calc = chip->buffers->ecccalc; + int ecc_size = chip->ecc.size; + int ecc_bytes = chip->ecc.bytes; + int ecc_steps = chip->ecc.steps; + uint32_t *eccpos = chip->ecc.layout->eccpos; + uint32_t start_step = offset / ecc_size; + uint32_t end_step = (offset + data_len - 1) / ecc_size; + int oob_bytes = mtd->oobsize / ecc_steps; + int step, i; + + for (step = 0; step < ecc_steps; step++) { + /* configure controller for WRITE access */ + chip->ecc.hwctl(mtd, NAND_ECC_WRITE); + + /* write data (untouched subpages already masked by 0xFF) */ + chip->write_buf(mtd, data_buf, ecc_size); + + /* mask ECC of un-touched subpages by padding 0xFF */ + if ((step < start_step) || (step > end_step)) + memset(ecc_calc, 0xff, ecc_bytes); + else + chip->ecc.calculate(mtd, data_buf, ecc_calc); + + /* mask OOB of un-touched subpages by padding 0xFF */ + /* if oob_required, preserve OOB metadata of written subpage */ + if (!oob_required || (step < start_step) || (step > end_step)) + memset(oob_buf, 0xff, oob_bytes); + + data_buf += ecc_size; + ecc_calc += ecc_bytes; + oob_buf += oob_bytes; + } + + /* copy calculated ECC for whole page to chip->buffer->oob */ + /* this include masked-value(0xFF) for unwritten subpages */ + ecc_calc = chip->buffers->ecccalc; + for (i = 0; i < chip->ecc.total; i++) + chip->oob_poi[eccpos[i]] = ecc_calc[i]; + + /* write OOB buffer to NAND device */ + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; +} + + /** * nand_write_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page write * @mtd: mtd info structure @@ -2047,6 +2091,8 @@ static int nand_write_page_syndrome(struct mtd_info *mtd, * nand_write_page - [REPLACEABLE] write one page * @mtd: MTD device structure * @chip: NAND chip descriptor + * @offset: address offset within the page + * @data_len: length of actual data to be written * @buf: the data to write * @oob_required: must write chip->oob_poi to OOB * @page: page number to write @@ -2054,15 +2100,25 @@ static int nand_write_page_syndrome(struct mtd_info *mtd, * @raw: use _raw version of write_page */ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int oob_required, int page, - int cached, int raw) + uint32_t offset, int data_len, const uint8_t *buf, + int oob_required, int page, int cached, int raw) { - int status; + int status, subpage; + + if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && + chip->ecc.write_subpage) + subpage = offset || (data_len < mtd->writesize); + else + subpage = 0; chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); if (unlikely(raw)) - status = chip->ecc.write_page_raw(mtd, chip, buf, oob_required); + status = chip->ecc.write_page_raw(mtd, chip, buf, + oob_required); + else if (subpage) + status = chip->ecc.write_subpage(mtd, chip, offset, data_len, + buf, oob_required); else status = chip->ecc.write_page(mtd, chip, buf, oob_required); @@ -2075,7 +2131,7 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, */ cached = 0; - if (!cached || !(chip->options & NAND_CACHEPRG)) { + if (!cached || !NAND_HAS_CACHEPROG(chip)) { chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); status = chip->waitfunc(mtd, chip); @@ -2176,7 +2232,7 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, uint8_t *oob = ops->oobbuf; uint8_t *buf = ops->datbuf; - int ret, subpage; + int ret; int oob_required = oob ? 1 : 0; ops->retlen = 0; @@ -2191,10 +2247,6 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, } column = to & (mtd->writesize - 1); - subpage = column || (writelen & (mtd->writesize - 1)); - - if (subpage && oob) - return -EINVAL; chipnr = (int)(to >> chip->chip_shift); chip->select_chip(mtd, chipnr); @@ -2243,9 +2295,9 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, /* We still need to erase leftover OOB data */ memset(chip->oob_poi, 0xff, mtd->oobsize); } - - ret = chip->write_page(mtd, chip, wbuf, oob_required, page, - cached, (ops->mode == MTD_OPS_RAW)); + ret = chip->write_page(mtd, chip, column, bytes, wbuf, + oob_required, page, cached, + (ops->mode == MTD_OPS_RAW)); if (ret) break; @@ -2481,24 +2533,6 @@ static void single_erase_cmd(struct mtd_info *mtd, int page) } /** - * multi_erase_cmd - [GENERIC] AND specific block erase command function - * @mtd: MTD device structure - * @page: the page address of the block which will be erased - * - * AND multi block erase command function. Erase 4 consecutive blocks. - */ -static void multi_erase_cmd(struct mtd_info *mtd, int page) -{ - struct nand_chip *chip = mtd->priv; - /* Send commands to erase a block */ - chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++); - chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++); - chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++); - chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page); - chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1); -} - -/** * nand_erase - [MTD Interface] erase block(s) * @mtd: MTD device structure * @instr: erase instruction @@ -2510,7 +2544,6 @@ static int nand_erase(struct mtd_info *mtd, struct erase_info *instr) return nand_erase_nand(mtd, instr, 0); } -#define BBT_PAGE_MASK 0xffffff3f /** * nand_erase_nand - [INTERN] erase block(s) * @mtd: MTD device structure @@ -2524,8 +2557,6 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, { int page, status, pages_per_block, ret, chipnr; struct nand_chip *chip = mtd->priv; - loff_t rewrite_bbt[NAND_MAX_CHIPS] = {0}; - unsigned int bbt_masked_page = 0xffffffff; loff_t len; pr_debug("%s: start = 0x%012llx, len = %llu\n", @@ -2556,15 +2587,6 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, goto erase_exit; } - /* - * If BBT requires refresh, set the BBT page mask to see if the BBT - * should be rewritten. Otherwise the mask is set to 0xffffffff which - * can not be matched. This is also done when the bbt is actually - * erased to avoid recursive updates. - */ - if (chip->options & BBT_AUTO_REFRESH && !allowbbt) - bbt_masked_page = chip->bbt_td->pages[chipnr] & BBT_PAGE_MASK; - /* Loop through the pages */ len = instr->len; @@ -2610,15 +2632,6 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, goto erase_exit; } - /* - * If BBT requires refresh, set the BBT rewrite flag to the - * page being erased. - */ - if (bbt_masked_page != 0xffffffff && - (page & BBT_PAGE_MASK) == bbt_masked_page) - rewrite_bbt[chipnr] = - ((loff_t)page << chip->page_shift); - /* Increment page address and decrement length */ len -= (1 << chip->phys_erase_shift); page += pages_per_block; @@ -2628,15 +2641,6 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, chipnr++; chip->select_chip(mtd, -1); chip->select_chip(mtd, chipnr); - - /* - * If BBT requires refresh and BBT-PERCHIP, set the BBT - * page mask to see if this BBT should be rewritten. - */ - if (bbt_masked_page != 0xffffffff && - (chip->bbt_td->options & NAND_BBT_PERCHIP)) - bbt_masked_page = chip->bbt_td->pages[chipnr] & - BBT_PAGE_MASK; } } instr->state = MTD_ERASE_DONE; @@ -2653,23 +2657,6 @@ erase_exit: if (!ret) mtd_erase_callback(instr); - /* - * If BBT requires refresh and erase was successful, rewrite any - * selected bad block tables. - */ - if (bbt_masked_page == 0xffffffff || ret) - return ret; - - for (chipnr = 0; chipnr < chip->numchips; chipnr++) { - if (!rewrite_bbt[chipnr]) - continue; - /* Update the BBT for chip */ - pr_debug("%s: nand_update_bbt (%d:0x%0llx 0x%0x)\n", - __func__, chipnr, rewrite_bbt[chipnr], - chip->bbt_td->pages[chipnr]); - nand_update_bbt(mtd, rewrite_bbt[chipnr]); - } - /* Return more or less happy */ return ret; } @@ -2905,8 +2892,6 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, chip->onfi_version = 20; else if (val & (1 << 1)) chip->onfi_version = 10; - else - chip->onfi_version = 0; if (!chip->onfi_version) { pr_info("%s: unsupported ONFI version: %d\n", __func__, val); @@ -3171,6 +3156,30 @@ static void nand_decode_bbm_options(struct mtd_info *mtd, chip->bbt_options |= NAND_BBT_SCAN2NDPAGE; } +static inline bool is_full_id_nand(struct nand_flash_dev *type) +{ + return type->id_len; +} + +static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip, + struct nand_flash_dev *type, u8 *id_data, int *busw) +{ + if (!strncmp(type->id, id_data, type->id_len)) { + mtd->writesize = type->pagesize; + mtd->erasesize = type->erasesize; + mtd->oobsize = type->oobsize; + + chip->cellinfo = id_data[2]; + chip->chipsize = (uint64_t)type->chipsize << 20; + chip->options |= type->options; + + *busw = type->options & NAND_BUSWIDTH_16; + + return true; + } + return false; +} + /* * Get the flash and manufacturer id and lookup if the type is supported. */ @@ -3222,9 +3231,14 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, if (!type) type = nand_flash_ids; - for (; type->name != NULL; type++) - if (*dev_id == type->id) - break; + for (; type->name != NULL; type++) { + if (is_full_id_nand(type)) { + if (find_full_id_nand(mtd, chip, type, id_data, &busw)) + goto ident_done; + } else if (*dev_id == type->dev_id) { + break; + } + } chip->onfi_version = 0; if (!type->name || !type->pagesize) { @@ -3302,12 +3316,7 @@ ident_done: } chip->badblockbits = 8; - - /* Check for AND chips with 4 page planes */ - if (chip->options & NAND_4PAGE_ARRAY) - chip->erase_cmd = multi_erase_cmd; - else - chip->erase_cmd = single_erase_cmd; + chip->erase_cmd = single_erase_cmd; /* Do not replace user supplied command function! */ if (mtd->writesize > 512 && chip->cmdfunc == nand_command) @@ -3474,6 +3483,10 @@ int nand_scan_tail(struct mtd_info *mtd) chip->ecc.read_oob = nand_read_oob_std; if (!chip->ecc.write_oob) chip->ecc.write_oob = nand_write_oob_std; + if (!chip->ecc.read_subpage) + chip->ecc.read_subpage = nand_read_subpage; + if (!chip->ecc.write_subpage) + chip->ecc.write_subpage = nand_write_subpage_hwecc; case NAND_ECC_HW_SYNDROME: if ((!chip->ecc.calculate || !chip->ecc.correct || diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index 916d6e9c0ab1..267264320e06 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -1240,15 +1240,6 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs) */ static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; -static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 }; - -static struct nand_bbt_descr agand_flashbased = { - .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES, - .offs = 0x20, - .len = 6, - .pattern = scan_agand_pattern -}; - /* Generic flash bbt descriptors */ static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' }; static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' }; @@ -1333,22 +1324,6 @@ int nand_default_bbt(struct mtd_info *mtd) { struct nand_chip *this = mtd->priv; - /* - * Default for AG-AND. We must use a flash based bad block table as the - * devices have factory marked _good_ blocks. Erasing those blocks - * leads to loss of the good / bad information, so we _must_ store this - * information in a good / bad table during startup. - */ - if (this->options & NAND_IS_AND) { - /* Use the default pattern descriptors */ - if (!this->bbt_td) { - this->bbt_td = &bbt_main_descr; - this->bbt_md = &bbt_mirror_descr; - } - this->bbt_options |= NAND_BBT_USE_FLASH; - return nand_scan_bbt(mtd, &agand_flashbased); - } - /* Is a flash based bad block table requested? */ if (this->bbt_options & NAND_BBT_USE_FLASH) { /* Use the default pattern descriptors */ diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index 9c612388e5de..683813a46a90 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c @@ -10,163 +10,153 @@ */ #include <linux/module.h> #include <linux/mtd/nand.h> -/* -* Chip ID list -* -* Name. ID code, pagesize, chipsize in MegaByte, eraseblock size, -* options -* -* Pagesize; 0, 256, 512 -* 0 get this information from the extended chip ID -+ 256 256 Byte page size -* 512 512 Byte page size -*/ -struct nand_flash_dev nand_flash_ids[] = { +#include <linux/sizes.h> + +#define LP_OPTIONS NAND_SAMSUNG_LP_OPTIONS +#define LP_OPTIONS16 (LP_OPTIONS | NAND_BUSWIDTH_16) + #define SP_OPTIONS NAND_NEED_READRDY #define SP_OPTIONS16 (SP_OPTIONS | NAND_BUSWIDTH_16) -#ifdef CONFIG_MTD_NAND_MUSEUM_IDS - {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, SP_OPTIONS}, - {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, SP_OPTIONS}, - {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, SP_OPTIONS}, - {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, SP_OPTIONS}, - {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, SP_OPTIONS}, - {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, SP_OPTIONS}, - {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, SP_OPTIONS}, - {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, SP_OPTIONS}, - {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, SP_OPTIONS}, - {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, SP_OPTIONS}, - - {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, SP_OPTIONS}, - {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, SP_OPTIONS}, - {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, SP_OPTIONS16}, - {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, SP_OPTIONS16}, -#endif - - {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, SP_OPTIONS}, - {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, SP_OPTIONS}, - {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, SP_OPTIONS16}, - {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, SP_OPTIONS16}, - - {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, SP_OPTIONS}, - {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, SP_OPTIONS}, - {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, SP_OPTIONS16}, - {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, SP_OPTIONS16}, - - {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, SP_OPTIONS}, - {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, SP_OPTIONS}, - {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, SP_OPTIONS16}, - {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, SP_OPTIONS16}, - - {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, SP_OPTIONS}, - {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, SP_OPTIONS}, - {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, SP_OPTIONS}, - {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, SP_OPTIONS16}, - {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, SP_OPTIONS16}, - {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, SP_OPTIONS16}, - {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, SP_OPTIONS16}, - - {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, SP_OPTIONS}, +/* + * The chip ID list: + * name, device ID, page size, chip size in MiB, eraseblock size, options + * + * If page size and eraseblock size are 0, the sizes are taken from the + * extended chip ID. + */ +struct nand_flash_dev nand_flash_ids[] = { + /* + * Some incompatible NAND chips share device ID's and so must be + * listed by full ID. We list them first so that we can easily identify + * the most specific match. + */ + {"TC58NVG2S0F 4G 3.3V 8-bit", + { .id = {0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08} }, + SZ_4K, SZ_512, SZ_256K, 0, 8, 224}, + {"TC58NVG3S0F 8G 3.3V 8-bit", + { .id = {0x98, 0xd3, 0x90, 0x26, 0x76, 0x15, 0x02, 0x08} }, + SZ_4K, SZ_1K, SZ_256K, 0, 8, 232}, + {"TC58NVG5D2 32G 3.3V 8-bit", + { .id = {0x98, 0xd7, 0x94, 0x32, 0x76, 0x56, 0x09, 0x00} }, + SZ_8K, SZ_4K, SZ_1M, 0, 8, 640}, + {"TC58NVG6D2 64G 3.3V 8-bit", + { .id = {0x98, 0xde, 0x94, 0x82, 0x76, 0x56, 0x04, 0x20} }, + SZ_8K, SZ_8K, SZ_2M, 0, 8, 640}, + + LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS), + LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS), + LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE5, 4, SZ_8K, SP_OPTIONS), + LEGACY_ID_NAND("NAND 8MiB 3,3V 8-bit", 0xD6, 8, SZ_8K, SP_OPTIONS), + LEGACY_ID_NAND("NAND 8MiB 3,3V 8-bit", 0xE6, 8, SZ_8K, SP_OPTIONS), + + LEGACY_ID_NAND("NAND 16MiB 1,8V 8-bit", 0x33, 16, SZ_16K, SP_OPTIONS), + LEGACY_ID_NAND("NAND 16MiB 3,3V 8-bit", 0x73, 16, SZ_16K, SP_OPTIONS), + LEGACY_ID_NAND("NAND 16MiB 1,8V 16-bit", 0x43, 16, SZ_16K, SP_OPTIONS16), + LEGACY_ID_NAND("NAND 16MiB 3,3V 16-bit", 0x53, 16, SZ_16K, SP_OPTIONS16), + + LEGACY_ID_NAND("NAND 32MiB 1,8V 8-bit", 0x35, 32, SZ_16K, SP_OPTIONS), + LEGACY_ID_NAND("NAND 32MiB 3,3V 8-bit", 0x75, 32, SZ_16K, SP_OPTIONS), + LEGACY_ID_NAND("NAND 32MiB 1,8V 16-bit", 0x45, 32, SZ_16K, SP_OPTIONS16), + LEGACY_ID_NAND("NAND 32MiB 3,3V 16-bit", 0x55, 32, SZ_16K, SP_OPTIONS16), + + LEGACY_ID_NAND("NAND 64MiB 1,8V 8-bit", 0x36, 64, SZ_16K, SP_OPTIONS), + LEGACY_ID_NAND("NAND 64MiB 3,3V 8-bit", 0x76, 64, SZ_16K, SP_OPTIONS), + LEGACY_ID_NAND("NAND 64MiB 1,8V 16-bit", 0x46, 64, SZ_16K, SP_OPTIONS16), + LEGACY_ID_NAND("NAND 64MiB 3,3V 16-bit", 0x56, 64, SZ_16K, SP_OPTIONS16), + + LEGACY_ID_NAND("NAND 128MiB 1,8V 8-bit", 0x78, 128, SZ_16K, SP_OPTIONS), + LEGACY_ID_NAND("NAND 128MiB 1,8V 8-bit", 0x39, 128, SZ_16K, SP_OPTIONS), + LEGACY_ID_NAND("NAND 128MiB 3,3V 8-bit", 0x79, 128, SZ_16K, SP_OPTIONS), + LEGACY_ID_NAND("NAND 128MiB 1,8V 16-bit", 0x72, 128, SZ_16K, SP_OPTIONS16), + LEGACY_ID_NAND("NAND 128MiB 1,8V 16-bit", 0x49, 128, SZ_16K, SP_OPTIONS16), + LEGACY_ID_NAND("NAND 128MiB 3,3V 16-bit", 0x74, 128, SZ_16K, SP_OPTIONS16), + LEGACY_ID_NAND("NAND 128MiB 3,3V 16-bit", 0x59, 128, SZ_16K, SP_OPTIONS16), + + LEGACY_ID_NAND("NAND 256MiB 3,3V 8-bit", 0x71, 256, SZ_16K, SP_OPTIONS), /* - * These are the new chips with large page size. The pagesize and the - * erasesize is determined from the extended id bytes + * These are the new chips with large page size. Their page size and + * eraseblock size are determined from the extended ID bytes. */ -#define LP_OPTIONS NAND_SAMSUNG_LP_OPTIONS -#define LP_OPTIONS16 (LP_OPTIONS | NAND_BUSWIDTH_16) /* 512 Megabit */ - {"NAND 64MiB 1,8V 8-bit", 0xA2, 0, 64, 0, LP_OPTIONS}, - {"NAND 64MiB 1,8V 8-bit", 0xA0, 0, 64, 0, LP_OPTIONS}, - {"NAND 64MiB 3,3V 8-bit", 0xF2, 0, 64, 0, LP_OPTIONS}, - {"NAND 64MiB 3,3V 8-bit", 0xD0, 0, 64, 0, LP_OPTIONS}, - {"NAND 64MiB 3,3V 8-bit", 0xF0, 0, 64, 0, LP_OPTIONS}, - {"NAND 64MiB 1,8V 16-bit", 0xB2, 0, 64, 0, LP_OPTIONS16}, - {"NAND 64MiB 1,8V 16-bit", 0xB0, 0, 64, 0, LP_OPTIONS16}, - {"NAND 64MiB 3,3V 16-bit", 0xC2, 0, 64, 0, LP_OPTIONS16}, - {"NAND 64MiB 3,3V 16-bit", 0xC0, 0, 64, 0, LP_OPTIONS16}, + EXTENDED_ID_NAND("NAND 64MiB 1,8V 8-bit", 0xA2, 64, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 64MiB 1,8V 8-bit", 0xA0, 64, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 64MiB 3,3V 8-bit", 0xF2, 64, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 64MiB 3,3V 8-bit", 0xD0, 64, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 64MiB 3,3V 8-bit", 0xF0, 64, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 64MiB 1,8V 16-bit", 0xB2, 64, LP_OPTIONS16), + EXTENDED_ID_NAND("NAND 64MiB 1,8V 16-bit", 0xB0, 64, LP_OPTIONS16), + EXTENDED_ID_NAND("NAND 64MiB 3,3V 16-bit", 0xC2, 64, LP_OPTIONS16), + EXTENDED_ID_NAND("NAND 64MiB 3,3V 16-bit", 0xC0, 64, LP_OPTIONS16), /* 1 Gigabit */ - {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, LP_OPTIONS}, - {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, LP_OPTIONS}, - {"NAND 128MiB 3,3V 8-bit", 0xD1, 0, 128, 0, LP_OPTIONS}, - {"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, LP_OPTIONS16}, - {"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, LP_OPTIONS16}, - {"NAND 128MiB 1,8V 16-bit", 0xAD, 0, 128, 0, LP_OPTIONS16}, + EXTENDED_ID_NAND("NAND 128MiB 1,8V 8-bit", 0xA1, 128, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 128MiB 3,3V 8-bit", 0xF1, 128, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 128MiB 3,3V 8-bit", 0xD1, 128, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 128MiB 1,8V 16-bit", 0xB1, 128, LP_OPTIONS16), + EXTENDED_ID_NAND("NAND 128MiB 3,3V 16-bit", 0xC1, 128, LP_OPTIONS16), + EXTENDED_ID_NAND("NAND 128MiB 1,8V 16-bit", 0xAD, 128, LP_OPTIONS16), /* 2 Gigabit */ - {"NAND 256MiB 1,8V 8-bit", 0xAA, 0, 256, 0, LP_OPTIONS}, - {"NAND 256MiB 3,3V 8-bit", 0xDA, 0, 256, 0, LP_OPTIONS}, - {"NAND 256MiB 1,8V 16-bit", 0xBA, 0, 256, 0, LP_OPTIONS16}, - {"NAND 256MiB 3,3V 16-bit", 0xCA, 0, 256, 0, LP_OPTIONS16}, + EXTENDED_ID_NAND("NAND 256MiB 1,8V 8-bit", 0xAA, 256, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 256MiB 3,3V 8-bit", 0xDA, 256, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 256MiB 1,8V 16-bit", 0xBA, 256, LP_OPTIONS16), + EXTENDED_ID_NAND("NAND 256MiB 3,3V 16-bit", 0xCA, 256, LP_OPTIONS16), /* 4 Gigabit */ - {"NAND 512MiB 1,8V 8-bit", 0xAC, 0, 512, 0, LP_OPTIONS}, - {"NAND 512MiB 3,3V 8-bit", 0xDC, 0, 512, 0, LP_OPTIONS}, - {"NAND 512MiB 1,8V 16-bit", 0xBC, 0, 512, 0, LP_OPTIONS16}, - {"NAND 512MiB 3,3V 16-bit", 0xCC, 0, 512, 0, LP_OPTIONS16}, + EXTENDED_ID_NAND("NAND 512MiB 1,8V 8-bit", 0xAC, 512, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 512MiB 3,3V 8-bit", 0xDC, 512, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 512MiB 1,8V 16-bit", 0xBC, 512, LP_OPTIONS16), + EXTENDED_ID_NAND("NAND 512MiB 3,3V 16-bit", 0xCC, 512, LP_OPTIONS16), /* 8 Gigabit */ - {"NAND 1GiB 1,8V 8-bit", 0xA3, 0, 1024, 0, LP_OPTIONS}, - {"NAND 1GiB 3,3V 8-bit", 0xD3, 0, 1024, 0, LP_OPTIONS}, - {"NAND 1GiB 1,8V 16-bit", 0xB3, 0, 1024, 0, LP_OPTIONS16}, - {"NAND 1GiB 3,3V 16-bit", 0xC3, 0, 1024, 0, LP_OPTIONS16}, + EXTENDED_ID_NAND("NAND 1GiB 1,8V 8-bit", 0xA3, 1024, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 1GiB 3,3V 8-bit", 0xD3, 1024, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 1GiB 1,8V 16-bit", 0xB3, 1024, LP_OPTIONS16), + EXTENDED_ID_NAND("NAND 1GiB 3,3V 16-bit", 0xC3, 1024, LP_OPTIONS16), /* 16 Gigabit */ - {"NAND 2GiB 1,8V 8-bit", 0xA5, 0, 2048, 0, LP_OPTIONS}, - {"NAND 2GiB 3,3V 8-bit", 0xD5, 0, 2048, 0, LP_OPTIONS}, - {"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, LP_OPTIONS16}, - {"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, LP_OPTIONS16}, + EXTENDED_ID_NAND("NAND 2GiB 1,8V 8-bit", 0xA5, 2048, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 2GiB 3,3V 8-bit", 0xD5, 2048, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 2GiB 1,8V 16-bit", 0xB5, 2048, LP_OPTIONS16), + EXTENDED_ID_NAND("NAND 2GiB 3,3V 16-bit", 0xC5, 2048, LP_OPTIONS16), /* 32 Gigabit */ - {"NAND 4GiB 1,8V 8-bit", 0xA7, 0, 4096, 0, LP_OPTIONS}, - {"NAND 4GiB 3,3V 8-bit", 0xD7, 0, 4096, 0, LP_OPTIONS}, - {"NAND 4GiB 1,8V 16-bit", 0xB7, 0, 4096, 0, LP_OPTIONS16}, - {"NAND 4GiB 3,3V 16-bit", 0xC7, 0, 4096, 0, LP_OPTIONS16}, + EXTENDED_ID_NAND("NAND 4GiB 1,8V 8-bit", 0xA7, 4096, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 4GiB 3,3V 8-bit", 0xD7, 4096, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 4GiB 1,8V 16-bit", 0xB7, 4096, LP_OPTIONS16), + EXTENDED_ID_NAND("NAND 4GiB 3,3V 16-bit", 0xC7, 4096, LP_OPTIONS16), /* 64 Gigabit */ - {"NAND 8GiB 1,8V 8-bit", 0xAE, 0, 8192, 0, LP_OPTIONS}, - {"NAND 8GiB 3,3V 8-bit", 0xDE, 0, 8192, 0, LP_OPTIONS}, - {"NAND 8GiB 1,8V 16-bit", 0xBE, 0, 8192, 0, LP_OPTIONS16}, - {"NAND 8GiB 3,3V 16-bit", 0xCE, 0, 8192, 0, LP_OPTIONS16}, + EXTENDED_ID_NAND("NAND 8GiB 1,8V 8-bit", 0xAE, 8192, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 8GiB 3,3V 8-bit", 0xDE, 8192, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 8GiB 1,8V 16-bit", 0xBE, 8192, LP_OPTIONS16), + EXTENDED_ID_NAND("NAND 8GiB 3,3V 16-bit", 0xCE, 8192, LP_OPTIONS16), /* 128 Gigabit */ - {"NAND 16GiB 1,8V 8-bit", 0x1A, 0, 16384, 0, LP_OPTIONS}, - {"NAND 16GiB 3,3V 8-bit", 0x3A, 0, 16384, 0, LP_OPTIONS}, - {"NAND 16GiB 1,8V 16-bit", 0x2A, 0, 16384, 0, LP_OPTIONS16}, - {"NAND 16GiB 3,3V 16-bit", 0x4A, 0, 16384, 0, LP_OPTIONS16}, + EXTENDED_ID_NAND("NAND 16GiB 1,8V 8-bit", 0x1A, 16384, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 16GiB 3,3V 8-bit", 0x3A, 16384, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 16GiB 1,8V 16-bit", 0x2A, 16384, LP_OPTIONS16), + EXTENDED_ID_NAND("NAND 16GiB 3,3V 16-bit", 0x4A, 16384, LP_OPTIONS16), /* 256 Gigabit */ - {"NAND 32GiB 1,8V 8-bit", 0x1C, 0, 32768, 0, LP_OPTIONS}, - {"NAND 32GiB 3,3V 8-bit", 0x3C, 0, 32768, 0, LP_OPTIONS}, - {"NAND 32GiB 1,8V 16-bit", 0x2C, 0, 32768, 0, LP_OPTIONS16}, - {"NAND 32GiB 3,3V 16-bit", 0x4C, 0, 32768, 0, LP_OPTIONS16}, + EXTENDED_ID_NAND("NAND 32GiB 1,8V 8-bit", 0x1C, 32768, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 32GiB 3,3V 8-bit", 0x3C, 32768, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 32GiB 1,8V 16-bit", 0x2C, 32768, LP_OPTIONS16), + EXTENDED_ID_NAND("NAND 32GiB 3,3V 16-bit", 0x4C, 32768, LP_OPTIONS16), /* 512 Gigabit */ - {"NAND 64GiB 1,8V 8-bit", 0x1E, 0, 65536, 0, LP_OPTIONS}, - {"NAND 64GiB 3,3V 8-bit", 0x3E, 0, 65536, 0, LP_OPTIONS}, - {"NAND 64GiB 1,8V 16-bit", 0x2E, 0, 65536, 0, LP_OPTIONS16}, - {"NAND 64GiB 3,3V 16-bit", 0x4E, 0, 65536, 0, LP_OPTIONS16}, + EXTENDED_ID_NAND("NAND 64GiB 1,8V 8-bit", 0x1E, 65536, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 64GiB 3,3V 8-bit", 0x3E, 65536, LP_OPTIONS), + EXTENDED_ID_NAND("NAND 64GiB 1,8V 16-bit", 0x2E, 65536, LP_OPTIONS16), + EXTENDED_ID_NAND("NAND 64GiB 3,3V 16-bit", 0x4E, 65536, LP_OPTIONS16), - /* - * Renesas AND 1 Gigabit. Those chips do not support extended id and - * have a strange page/block layout ! The chosen minimum erasesize is - * 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page - * planes 1 block = 2 pages, but due to plane arrangement the blocks - * 0-3 consists of page 0 + 4,1 + 5, 2 + 6, 3 + 7 Anyway JFFS2 would - * increase the eraseblock size so we chose a combined one which can be - * erased in one go There are more speed improvements for reads and - * writes possible, but not implemented now - */ - {"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000, - NAND_IS_AND | NAND_4PAGE_ARRAY | BBT_AUTO_REFRESH}, - - {NULL,} + {NULL} }; -/* -* Manufacturer ID list -*/ +/* Manufacturer IDs */ struct nand_manufacturers nand_manuf_ids[] = { {NAND_MFR_TOSHIBA, "Toshiba"}, {NAND_MFR_SAMSUNG, "Samsung"}, diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 891c52a30e6a..cb38f3d94218 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -218,7 +218,6 @@ MODULE_PARM_DESC(bch, "Enable BCH ecc and set how many bits should " #define STATE_CMD_READOOB 0x00000005 /* read OOB area */ #define STATE_CMD_ERASE1 0x00000006 /* sector erase first command */ #define STATE_CMD_STATUS 0x00000007 /* read status */ -#define STATE_CMD_STATUS_M 0x00000008 /* read multi-plane status (isn't implemented) */ #define STATE_CMD_SEQIN 0x00000009 /* sequential data input */ #define STATE_CMD_READID 0x0000000A /* read ID */ #define STATE_CMD_ERASE2 0x0000000B /* sector erase second command */ @@ -263,14 +262,13 @@ MODULE_PARM_DESC(bch, "Enable BCH ecc and set how many bits should " #define NS_OPER_STATES 6 /* Maximum number of states in operation */ #define OPT_ANY 0xFFFFFFFF /* any chip supports this operation */ -#define OPT_PAGE256 0x00000001 /* 256-byte page chips */ #define OPT_PAGE512 0x00000002 /* 512-byte page chips */ #define OPT_PAGE2048 0x00000008 /* 2048-byte page chips */ #define OPT_SMARTMEDIA 0x00000010 /* SmartMedia technology chips */ #define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */ #define OPT_PAGE4096 0x00000080 /* 4096-byte page chips */ #define OPT_LARGEPAGE (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte page chips */ -#define OPT_SMALLPAGE (OPT_PAGE256 | OPT_PAGE512) /* 256 and 512-byte page chips */ +#define OPT_SMALLPAGE (OPT_PAGE512) /* 512-byte page chips */ /* Remove action bits from state */ #define NS_STATE(x) ((x) & ~ACTION_MASK) @@ -406,8 +404,6 @@ static struct nandsim_operations { {OPT_ANY, {STATE_CMD_ERASE1, STATE_ADDR_SEC, STATE_CMD_ERASE2 | ACTION_SECERASE, STATE_READY}}, /* Read status */ {OPT_ANY, {STATE_CMD_STATUS, STATE_DATAOUT_STATUS, STATE_READY}}, - /* Read multi-plane status */ - {OPT_SMARTMEDIA, {STATE_CMD_STATUS_M, STATE_DATAOUT_STATUS_M, STATE_READY}}, /* Read ID */ {OPT_ANY, {STATE_CMD_READID, STATE_ADDR_ZERO, STATE_DATAOUT_ID, STATE_READY}}, /* Large page devices read page */ @@ -699,10 +695,7 @@ static int init_nandsim(struct mtd_info *mtd) ns->geom.secszoob = ns->geom.secsz + ns->geom.oobsz * ns->geom.pgsec; ns->options = 0; - if (ns->geom.pgsz == 256) { - ns->options |= OPT_PAGE256; - } - else if (ns->geom.pgsz == 512) { + if (ns->geom.pgsz == 512) { ns->options |= OPT_PAGE512; if (ns->busw == 8) ns->options |= OPT_PAGE512_8BIT; @@ -769,9 +762,9 @@ static int init_nandsim(struct mtd_info *mtd) } /* Detect how many ID bytes the NAND chip outputs */ - for (i = 0; nand_flash_ids[i].name != NULL; i++) { - if (second_id_byte != nand_flash_ids[i].id) - continue; + for (i = 0; nand_flash_ids[i].name != NULL; i++) { + if (second_id_byte != nand_flash_ids[i].dev_id) + continue; } if (ns->busw == 16) @@ -1079,8 +1072,6 @@ static char *get_state_name(uint32_t state) return "STATE_CMD_ERASE1"; case STATE_CMD_STATUS: return "STATE_CMD_STATUS"; - case STATE_CMD_STATUS_M: - return "STATE_CMD_STATUS_M"; case STATE_CMD_SEQIN: return "STATE_CMD_SEQIN"; case STATE_CMD_READID: @@ -1145,7 +1136,6 @@ static int check_command(int cmd) case NAND_CMD_RNDOUTSTART: return 0; - case NAND_CMD_STATUS_MULTI: default: return 1; } @@ -1171,8 +1161,6 @@ static uint32_t get_state_by_command(unsigned command) return STATE_CMD_ERASE1; case NAND_CMD_STATUS: return STATE_CMD_STATUS; - case NAND_CMD_STATUS_MULTI: - return STATE_CMD_STATUS_M; case NAND_CMD_SEQIN: return STATE_CMD_SEQIN; case NAND_CMD_READID: @@ -2306,7 +2294,7 @@ static int __init ns_init_module(void) nand->geom.idbytes = 2; nand->regs.status = NS_STATUS_OK(nand); nand->nxstate = STATE_UNKNOWN; - nand->options |= OPT_PAGE256; /* temporary value */ + nand->options |= OPT_PAGE512; /* temporary value */ nand->ids[0] = first_id_byte; nand->ids[1] = second_id_byte; nand->ids[2] = third_id_byte; diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c index a6191198d259..cd6be2ed53a8 100644 --- a/drivers/mtd/nand/nuc900_nand.c +++ b/drivers/mtd/nand/nuc900_nand.c @@ -177,15 +177,6 @@ static void nuc900_nand_command_lp(struct mtd_info *mtd, unsigned int command, case NAND_CMD_SEQIN: case NAND_CMD_RNDIN: case NAND_CMD_STATUS: - case NAND_CMD_DEPLETE1: - return; - - case NAND_CMD_STATUS_ERROR: - case NAND_CMD_STATUS_ERROR0: - case NAND_CMD_STATUS_ERROR1: - case NAND_CMD_STATUS_ERROR2: - case NAND_CMD_STATUS_ERROR3: - udelay(chip->chip_delay); return; case NAND_CMD_RESET: diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 8e820ddf4e08..81b80af55872 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1023,9 +1023,9 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip) int status, state = this->state; if (state == FL_ERASING) - timeo += (HZ * 400) / 1000; + timeo += msecs_to_jiffies(400); else - timeo += (HZ * 20) / 1000; + timeo += msecs_to_jiffies(20); writeb(NAND_CMD_STATUS & 0xFF, info->reg.gpmc_nand_command); while (time_before(jiffies, timeo)) { @@ -1701,8 +1701,9 @@ static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt) elm_node = of_find_node_by_phandle(be32_to_cpup(parp)); pdev = of_find_device_by_node(elm_node); info->elm_dev = &pdev->dev; - elm_config(info->elm_dev, bch_type); - info->is_elm_used = true; + + if (elm_config(info->elm_dev, bch_type) == 0) + info->is_elm_used = true; } if (info->is_elm_used && (mtd->writesize <= 4096)) { diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index cd72b9299f6b..8fbd00208610 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -231,18 +231,7 @@ static struct platform_driver orion_nand_driver = { }, }; -static int __init orion_nand_init(void) -{ - return platform_driver_probe(&orion_nand_driver, orion_nand_probe); -} - -static void __exit orion_nand_exit(void) -{ - platform_driver_unregister(&orion_nand_driver); -} - -module_init(orion_nand_init); -module_exit(orion_nand_exit); +module_platform_driver_probe(orion_nand_driver, orion_nand_probe); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Tzachi Perelstein"); diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c deleted file mode 100644 index 0ddd90e5788f..000000000000 --- a/drivers/mtd/nand/ppchameleonevb.c +++ /dev/null @@ -1,403 +0,0 @@ -/* - * drivers/mtd/nand/ppchameleonevb.c - * - * Copyright (C) 2003 DAVE Srl (info@wawnet.biz) - * - * Derived from drivers/mtd/nand/edb7312.c - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Overview: - * This is a device driver for the NAND flash devices found on the - * PPChameleon/PPChameleonEVB system. - * PPChameleon options (autodetected): - * - BA model: no NAND - * - ME model: 32MB (Samsung K9F5608U0B) - * - HI model: 128MB (Samsung K9F1G08UOM) - * PPChameleonEVB options: - * - 32MB (Samsung K9F5608U0B) - */ - -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> -#include <asm/io.h> -#include <platforms/PPChameleonEVB.h> - -#undef USE_READY_BUSY_PIN -#define USE_READY_BUSY_PIN -/* see datasheets (tR) */ -#define NAND_BIG_DELAY_US 25 -#define NAND_SMALL_DELAY_US 10 - -/* handy sizes */ -#define SZ_4M 0x00400000 -#define NAND_SMALL_SIZE 0x02000000 -#define NAND_MTD_NAME "ppchameleon-nand" -#define NAND_EVB_MTD_NAME "ppchameleonevb-nand" - -/* GPIO pins used to drive NAND chip mounted on processor module */ -#define NAND_nCE_GPIO_PIN (0x80000000 >> 1) -#define NAND_CLE_GPIO_PIN (0x80000000 >> 2) -#define NAND_ALE_GPIO_PIN (0x80000000 >> 3) -#define NAND_RB_GPIO_PIN (0x80000000 >> 4) -/* GPIO pins used to drive NAND chip mounted on EVB */ -#define NAND_EVB_nCE_GPIO_PIN (0x80000000 >> 14) -#define NAND_EVB_CLE_GPIO_PIN (0x80000000 >> 15) -#define NAND_EVB_ALE_GPIO_PIN (0x80000000 >> 16) -#define NAND_EVB_RB_GPIO_PIN (0x80000000 >> 31) - -/* - * MTD structure for PPChameleonEVB board - */ -static struct mtd_info *ppchameleon_mtd = NULL; -static struct mtd_info *ppchameleonevb_mtd = NULL; - -/* - * Module stuff - */ -static unsigned long ppchameleon_fio_pbase = CFG_NAND0_PADDR; -static unsigned long ppchameleonevb_fio_pbase = CFG_NAND1_PADDR; - -#ifdef MODULE -module_param(ppchameleon_fio_pbase, ulong, 0); -module_param(ppchameleonevb_fio_pbase, ulong, 0); -#else -__setup("ppchameleon_fio_pbase=", ppchameleon_fio_pbase); -__setup("ppchameleonevb_fio_pbase=", ppchameleonevb_fio_pbase); -#endif - -/* - * Define static partitions for flash devices - */ -static struct mtd_partition partition_info_hi[] = { - { .name = "PPChameleon HI Nand Flash", - .offset = 0, - .size = 128 * 1024 * 1024 - } -}; - -static struct mtd_partition partition_info_me[] = { - { .name = "PPChameleon ME Nand Flash", - .offset = 0, - .size = 32 * 1024 * 1024 - } -}; - -static struct mtd_partition partition_info_evb[] = { - { .name = "PPChameleonEVB Nand Flash", - .offset = 0, - .size = 32 * 1024 * 1024 - } -}; - -#define NUM_PARTITIONS 1 - -/* - * hardware specific access to control-lines - */ -static void ppchameleon_hwcontrol(struct mtd_info *mtdinfo, int cmd, - unsigned int ctrl) -{ - struct nand_chip *chip = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { -#error Missing headerfiles. No way to fix this. -tglx - switch (cmd) { - case NAND_CTL_SETCLE: - MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND0_PADDR); - break; - case NAND_CTL_CLRCLE: - MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND0_PADDR); - break; - case NAND_CTL_SETALE: - MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND0_PADDR); - break; - case NAND_CTL_CLRALE: - MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND0_PADDR); - break; - case NAND_CTL_SETNCE: - MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND0_PADDR); - break; - case NAND_CTL_CLRNCE: - MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND0_PADDR); - break; - } - } - if (cmd != NAND_CMD_NONE) - writeb(cmd, chip->IO_ADDR_W); -} - -static void ppchameleonevb_hwcontrol(struct mtd_info *mtdinfo, int cmd, - unsigned int ctrl) -{ - struct nand_chip *chip = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { -#error Missing headerfiles. No way to fix this. -tglx - switch (cmd) { - case NAND_CTL_SETCLE: - MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND1_PADDR); - break; - case NAND_CTL_CLRCLE: - MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND1_PADDR); - break; - case NAND_CTL_SETALE: - MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND1_PADDR); - break; - case NAND_CTL_CLRALE: - MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND1_PADDR); - break; - case NAND_CTL_SETNCE: - MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND1_PADDR); - break; - case NAND_CTL_CLRNCE: - MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND1_PADDR); - break; - } - } - if (cmd != NAND_CMD_NONE) - writeb(cmd, chip->IO_ADDR_W); -} - -#ifdef USE_READY_BUSY_PIN -/* - * read device ready pin - */ -static int ppchameleon_device_ready(struct mtd_info *minfo) -{ - if (in_be32((volatile unsigned *)GPIO0_IR) & NAND_RB_GPIO_PIN) - return 1; - return 0; -} - -static int ppchameleonevb_device_ready(struct mtd_info *minfo) -{ - if (in_be32((volatile unsigned *)GPIO0_IR) & NAND_EVB_RB_GPIO_PIN) - return 1; - return 0; -} -#endif - -/* - * Main initialization routine - */ -static int __init ppchameleonevb_init(void) -{ - struct nand_chip *this; - void __iomem *ppchameleon_fio_base; - void __iomem *ppchameleonevb_fio_base; - - /********************************* - * Processor module NAND (if any) * - *********************************/ - /* Allocate memory for MTD device structure and private data */ - ppchameleon_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); - if (!ppchameleon_mtd) { - printk("Unable to allocate PPChameleon NAND MTD device structure.\n"); - return -ENOMEM; - } - - /* map physical address */ - ppchameleon_fio_base = ioremap(ppchameleon_fio_pbase, SZ_4M); - if (!ppchameleon_fio_base) { - printk("ioremap PPChameleon NAND flash failed\n"); - kfree(ppchameleon_mtd); - return -EIO; - } - - /* Get pointer to private data */ - this = (struct nand_chip *)(&ppchameleon_mtd[1]); - - /* Initialize structures */ - memset(ppchameleon_mtd, 0, sizeof(struct mtd_info)); - memset(this, 0, sizeof(struct nand_chip)); - - /* Link the private data with the MTD structure */ - ppchameleon_mtd->priv = this; - ppchameleon_mtd->owner = THIS_MODULE; - - /* Initialize GPIOs */ - /* Pin mapping for NAND chip */ - /* - CE GPIO_01 - CLE GPIO_02 - ALE GPIO_03 - R/B GPIO_04 - */ - /* output select */ - out_be32((volatile unsigned *)GPIO0_OSRH, in_be32((volatile unsigned *)GPIO0_OSRH) & 0xC0FFFFFF); - /* three-state select */ - out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xC0FFFFFF); - /* enable output driver */ - out_be32((volatile unsigned *)GPIO0_TCR, - in_be32((volatile unsigned *)GPIO0_TCR) | NAND_nCE_GPIO_PIN | NAND_CLE_GPIO_PIN | NAND_ALE_GPIO_PIN); -#ifdef USE_READY_BUSY_PIN - /* three-state select */ - out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xFF3FFFFF); - /* high-impedecence */ - out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) & (~NAND_RB_GPIO_PIN)); - /* input select */ - out_be32((volatile unsigned *)GPIO0_ISR1H, - (in_be32((volatile unsigned *)GPIO0_ISR1H) & 0xFF3FFFFF) | 0x00400000); -#endif - - /* insert callbacks */ - this->IO_ADDR_R = ppchameleon_fio_base; - this->IO_ADDR_W = ppchameleon_fio_base; - this->cmd_ctrl = ppchameleon_hwcontrol; -#ifdef USE_READY_BUSY_PIN - this->dev_ready = ppchameleon_device_ready; -#endif - this->chip_delay = NAND_BIG_DELAY_US; - /* ECC mode */ - this->ecc.mode = NAND_ECC_SOFT; - - /* Scan to find existence of the device (it could not be mounted) */ - if (nand_scan(ppchameleon_mtd, 1)) { - iounmap((void *)ppchameleon_fio_base); - ppchameleon_fio_base = NULL; - kfree(ppchameleon_mtd); - goto nand_evb_init; - } -#ifndef USE_READY_BUSY_PIN - /* Adjust delay if necessary */ - if (ppchameleon_mtd->size == NAND_SMALL_SIZE) - this->chip_delay = NAND_SMALL_DELAY_US; -#endif - - ppchameleon_mtd->name = "ppchameleon-nand"; - - /* Register the partitions */ - mtd_device_parse_register(ppchameleon_mtd, NULL, NULL, - ppchameleon_mtd->size == NAND_SMALL_SIZE ? - partition_info_me : partition_info_hi, - NUM_PARTITIONS); - - nand_evb_init: - /**************************** - * EVB NAND (always present) * - ****************************/ - /* Allocate memory for MTD device structure and private data */ - ppchameleonevb_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); - if (!ppchameleonevb_mtd) { - printk("Unable to allocate PPChameleonEVB NAND MTD device structure.\n"); - if (ppchameleon_fio_base) - iounmap(ppchameleon_fio_base); - return -ENOMEM; - } - - /* map physical address */ - ppchameleonevb_fio_base = ioremap(ppchameleonevb_fio_pbase, SZ_4M); - if (!ppchameleonevb_fio_base) { - printk("ioremap PPChameleonEVB NAND flash failed\n"); - kfree(ppchameleonevb_mtd); - if (ppchameleon_fio_base) - iounmap(ppchameleon_fio_base); - return -EIO; - } - - /* Get pointer to private data */ - this = (struct nand_chip *)(&ppchameleonevb_mtd[1]); - - /* Initialize structures */ - memset(ppchameleonevb_mtd, 0, sizeof(struct mtd_info)); - memset(this, 0, sizeof(struct nand_chip)); - - /* Link the private data with the MTD structure */ - ppchameleonevb_mtd->priv = this; - - /* Initialize GPIOs */ - /* Pin mapping for NAND chip */ - /* - CE GPIO_14 - CLE GPIO_15 - ALE GPIO_16 - R/B GPIO_31 - */ - /* output select */ - out_be32((volatile unsigned *)GPIO0_OSRH, in_be32((volatile unsigned *)GPIO0_OSRH) & 0xFFFFFFF0); - out_be32((volatile unsigned *)GPIO0_OSRL, in_be32((volatile unsigned *)GPIO0_OSRL) & 0x3FFFFFFF); - /* three-state select */ - out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xFFFFFFF0); - out_be32((volatile unsigned *)GPIO0_TSRL, in_be32((volatile unsigned *)GPIO0_TSRL) & 0x3FFFFFFF); - /* enable output driver */ - out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) | NAND_EVB_nCE_GPIO_PIN | - NAND_EVB_CLE_GPIO_PIN | NAND_EVB_ALE_GPIO_PIN); -#ifdef USE_READY_BUSY_PIN - /* three-state select */ - out_be32((volatile unsigned *)GPIO0_TSRL, in_be32((volatile unsigned *)GPIO0_TSRL) & 0xFFFFFFFC); - /* high-impedecence */ - out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) & (~NAND_EVB_RB_GPIO_PIN)); - /* input select */ - out_be32((volatile unsigned *)GPIO0_ISR1L, - (in_be32((volatile unsigned *)GPIO0_ISR1L) & 0xFFFFFFFC) | 0x00000001); -#endif - - /* insert callbacks */ - this->IO_ADDR_R = ppchameleonevb_fio_base; - this->IO_ADDR_W = ppchameleonevb_fio_base; - this->cmd_ctrl = ppchameleonevb_hwcontrol; -#ifdef USE_READY_BUSY_PIN - this->dev_ready = ppchameleonevb_device_ready; -#endif - this->chip_delay = NAND_SMALL_DELAY_US; - - /* ECC mode */ - this->ecc.mode = NAND_ECC_SOFT; - - /* Scan to find existence of the device */ - if (nand_scan(ppchameleonevb_mtd, 1)) { - iounmap((void *)ppchameleonevb_fio_base); - kfree(ppchameleonevb_mtd); - if (ppchameleon_fio_base) - iounmap(ppchameleon_fio_base); - return -ENXIO; - } - - ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME; - - /* Register the partitions */ - mtd_device_parse_register(ppchameleonevb_mtd, NULL, NULL, - ppchameleon_mtd->size == NAND_SMALL_SIZE ? - partition_info_me : partition_info_hi, - NUM_PARTITIONS); - - /* Return happy */ - return 0; -} - -module_init(ppchameleonevb_init); - -/* - * Clean up routine - */ -static void __exit ppchameleonevb_cleanup(void) -{ - struct nand_chip *this; - - /* Release resources, unregister device(s) */ - nand_release(ppchameleon_mtd); - nand_release(ppchameleonevb_mtd); - - /* Release iomaps */ - this = (struct nand_chip *) &ppchameleon_mtd[1]; - iounmap((void *) this->IO_ADDR_R); - this = (struct nand_chip *) &ppchameleonevb_mtd[1]; - iounmap((void *) this->IO_ADDR_R); - - /* Free the MTD device structure */ - kfree (ppchameleon_mtd); - kfree (ppchameleonevb_mtd); -} -module_exit(ppchameleonevb_cleanup); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("DAVE Srl <support-ppchameleon@dave-tech.it>"); -MODULE_DESCRIPTION("MTD map driver for DAVE Srl PPChameleonEVB board"); diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 37ee75c7bacb..dec80ca6a5ce 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -989,7 +989,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) } pxa3xx_flash_ids[0].name = f->name; - pxa3xx_flash_ids[0].id = (f->chip_id >> 8) & 0xffff; + pxa3xx_flash_ids[0].dev_id = (f->chip_id >> 8) & 0xffff; pxa3xx_flash_ids[0].pagesize = f->page_size; chipsize = (uint64_t)f->num_blocks * f->page_per_block * f->page_size; pxa3xx_flash_ids[0].chipsize = chipsize >> 20; diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c deleted file mode 100644 index e55b5cfbe145..000000000000 --- a/drivers/mtd/nand/rtc_from4.c +++ /dev/null @@ -1,624 +0,0 @@ -/* - * drivers/mtd/nand/rtc_from4.c - * - * Copyright (C) 2004 Red Hat, Inc. - * - * Derived from drivers/mtd/nand/spia.c - * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Overview: - * This is a device driver for the AG-AND flash device found on the - * Renesas Technology Corp. Flash ROM 4-slot interface board (FROM_BOARD4), - * which utilizes the Renesas HN29V1G91T-30 part. - * This chip is a 1 GBibit (128MiB x 8 bits) AG-AND flash device. - */ - -#include <linux/delay.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/rslib.h> -#include <linux/bitrev.h> -#include <linux/module.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> -#include <asm/io.h> - -/* - * MTD structure for Renesas board - */ -static struct mtd_info *rtc_from4_mtd = NULL; - -#define RTC_FROM4_MAX_CHIPS 2 - -/* HS77x9 processor register defines */ -#define SH77X9_BCR1 ((volatile unsigned short *)(0xFFFFFF60)) -#define SH77X9_BCR2 ((volatile unsigned short *)(0xFFFFFF62)) -#define SH77X9_WCR1 ((volatile unsigned short *)(0xFFFFFF64)) -#define SH77X9_WCR2 ((volatile unsigned short *)(0xFFFFFF66)) -#define SH77X9_MCR ((volatile unsigned short *)(0xFFFFFF68)) -#define SH77X9_PCR ((volatile unsigned short *)(0xFFFFFF6C)) -#define SH77X9_FRQCR ((volatile unsigned short *)(0xFFFFFF80)) - -/* - * Values specific to the Renesas Technology Corp. FROM_BOARD4 (used with HS77x9 processor) - */ -/* Address where flash is mapped */ -#define RTC_FROM4_FIO_BASE 0x14000000 - -/* CLE and ALE are tied to address lines 5 & 4, respectively */ -#define RTC_FROM4_CLE (1 << 5) -#define RTC_FROM4_ALE (1 << 4) - -/* address lines A24-A22 used for chip selection */ -#define RTC_FROM4_NAND_ADDR_SLOT3 (0x00800000) -#define RTC_FROM4_NAND_ADDR_SLOT4 (0x00C00000) -#define RTC_FROM4_NAND_ADDR_FPGA (0x01000000) -/* mask address lines A24-A22 used for chip selection */ -#define RTC_FROM4_NAND_ADDR_MASK (RTC_FROM4_NAND_ADDR_SLOT3 | RTC_FROM4_NAND_ADDR_SLOT4 | RTC_FROM4_NAND_ADDR_FPGA) - -/* FPGA status register for checking device ready (bit zero) */ -#define RTC_FROM4_FPGA_SR (RTC_FROM4_NAND_ADDR_FPGA | 0x00000002) -#define RTC_FROM4_DEVICE_READY 0x0001 - -/* FPGA Reed-Solomon ECC Control register */ - -#define RTC_FROM4_RS_ECC_CTL (RTC_FROM4_NAND_ADDR_FPGA | 0x00000050) -#define RTC_FROM4_RS_ECC_CTL_CLR (1 << 7) -#define RTC_FROM4_RS_ECC_CTL_GEN (1 << 6) -#define RTC_FROM4_RS_ECC_CTL_FD_E (1 << 5) - -/* FPGA Reed-Solomon ECC code base */ -#define RTC_FROM4_RS_ECC (RTC_FROM4_NAND_ADDR_FPGA | 0x00000060) -#define RTC_FROM4_RS_ECCN (RTC_FROM4_NAND_ADDR_FPGA | 0x00000080) - -/* FPGA Reed-Solomon ECC check register */ -#define RTC_FROM4_RS_ECC_CHK (RTC_FROM4_NAND_ADDR_FPGA | 0x00000070) -#define RTC_FROM4_RS_ECC_CHK_ERROR (1 << 7) - -#define ERR_STAT_ECC_AVAILABLE 0x20 - -/* Undefine for software ECC */ -#define RTC_FROM4_HWECC 1 - -/* Define as 1 for no virtual erase blocks (in JFFS2) */ -#define RTC_FROM4_NO_VIRTBLOCKS 0 - -/* - * Module stuff - */ -static void __iomem *rtc_from4_fio_base = (void *)P2SEGADDR(RTC_FROM4_FIO_BASE); - -static const struct mtd_partition partition_info[] = { - { - .name = "Renesas flash partition 1", - .offset = 0, - .size = MTDPART_SIZ_FULL}, -}; - -#define NUM_PARTITIONS 1 - -/* - * hardware specific flash bbt decriptors - * Note: this is to allow debugging by disabling - * NAND_BBT_CREATE and/or NAND_BBT_WRITE - * - */ -static uint8_t bbt_pattern[] = { 'B', 'b', 't', '0' }; -static uint8_t mirror_pattern[] = { '1', 't', 'b', 'B' }; - -static struct nand_bbt_descr rtc_from4_bbt_main_descr = { - .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE - | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, - .offs = 40, - .len = 4, - .veroffs = 44, - .maxblocks = 4, - .pattern = bbt_pattern -}; - -static struct nand_bbt_descr rtc_from4_bbt_mirror_descr = { - .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE - | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, - .offs = 40, - .len = 4, - .veroffs = 44, - .maxblocks = 4, - .pattern = mirror_pattern -}; - -#ifdef RTC_FROM4_HWECC - -/* the Reed Solomon control structure */ -static struct rs_control *rs_decoder; - -/* - * hardware specific Out Of Band information - */ -static struct nand_ecclayout rtc_from4_nand_oobinfo = { - .eccbytes = 32, - .eccpos = { - 0, 1, 2, 3, 4, 5, 6, 7, - 8, 9, 10, 11, 12, 13, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 23, - 24, 25, 26, 27, 28, 29, 30, 31}, - .oobfree = {{32, 32}} -}; - -#endif - -/* - * rtc_from4_hwcontrol - hardware specific access to control-lines - * @mtd: MTD device structure - * @cmd: hardware control command - * - * Address lines (A5 and A4) are used to control Command and Address Latch - * Enable on this board, so set the read/write address appropriately. - * - * Chip Enable is also controlled by the Chip Select (CS5) and - * Address lines (A24-A22), so no action is required here. - * - */ -static void rtc_from4_hwcontrol(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - struct nand_chip *chip = (mtd->priv); - - if (cmd == NAND_CMD_NONE) - return; - - if (ctrl & NAND_CLE) - writeb(cmd, chip->IO_ADDR_W | RTC_FROM4_CLE); - else - writeb(cmd, chip->IO_ADDR_W | RTC_FROM4_ALE); -} - -/* - * rtc_from4_nand_select_chip - hardware specific chip select - * @mtd: MTD device structure - * @chip: Chip to select (0 == slot 3, 1 == slot 4) - * - * The chip select is based on address lines A24-A22. - * This driver uses flash slots 3 and 4 (A23-A22). - * - */ -static void rtc_from4_nand_select_chip(struct mtd_info *mtd, int chip) -{ - struct nand_chip *this = mtd->priv; - - this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R & ~RTC_FROM4_NAND_ADDR_MASK); - this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W & ~RTC_FROM4_NAND_ADDR_MASK); - - switch (chip) { - - case 0: /* select slot 3 chip */ - this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R | RTC_FROM4_NAND_ADDR_SLOT3); - this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_NAND_ADDR_SLOT3); - break; - case 1: /* select slot 4 chip */ - this->IO_ADDR_R = (void __iomem *)((unsigned long)this->IO_ADDR_R | RTC_FROM4_NAND_ADDR_SLOT4); - this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_NAND_ADDR_SLOT4); - break; - - } -} - -/* - * rtc_from4_nand_device_ready - hardware specific ready/busy check - * @mtd: MTD device structure - * - * This board provides the Ready/Busy state in the status register - * of the FPGA. Bit zero indicates the RDY(1)/BSY(0) signal. - * - */ -static int rtc_from4_nand_device_ready(struct mtd_info *mtd) -{ - unsigned short status; - - status = *((volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_FPGA_SR)); - - return (status & RTC_FROM4_DEVICE_READY); - -} - -/* - * deplete - code to perform device recovery in case there was a power loss - * @mtd: MTD device structure - * @chip: Chip to select (0 == slot 3, 1 == slot 4) - * - * If there was a sudden loss of power during an erase operation, a - * "device recovery" operation must be performed when power is restored - * to ensure correct operation. This routine performs the required steps - * for the requested chip. - * - * See page 86 of the data sheet for details. - * - */ -static void deplete(struct mtd_info *mtd, int chip) -{ - struct nand_chip *this = mtd->priv; - - /* wait until device is ready */ - while (!this->dev_ready(mtd)) ; - - this->select_chip(mtd, chip); - - /* Send the commands for device recovery, phase 1 */ - this->cmdfunc(mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0000); - this->cmdfunc(mtd, NAND_CMD_DEPLETE2, -1, -1); - - /* Send the commands for device recovery, phase 2 */ - this->cmdfunc(mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0004); - this->cmdfunc(mtd, NAND_CMD_DEPLETE2, -1, -1); - -} - -#ifdef RTC_FROM4_HWECC -/* - * rtc_from4_enable_hwecc - hardware specific hardware ECC enable function - * @mtd: MTD device structure - * @mode: I/O mode; read or write - * - * enable hardware ECC for data read or write - * - */ -static void rtc_from4_enable_hwecc(struct mtd_info *mtd, int mode) -{ - volatile unsigned short *rs_ecc_ctl = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC_CTL); - unsigned short status; - - switch (mode) { - case NAND_ECC_READ: - status = RTC_FROM4_RS_ECC_CTL_CLR | RTC_FROM4_RS_ECC_CTL_FD_E; - - *rs_ecc_ctl = status; - break; - - case NAND_ECC_READSYN: - status = 0x00; - - *rs_ecc_ctl = status; - break; - - case NAND_ECC_WRITE: - status = RTC_FROM4_RS_ECC_CTL_CLR | RTC_FROM4_RS_ECC_CTL_GEN | RTC_FROM4_RS_ECC_CTL_FD_E; - - *rs_ecc_ctl = status; - break; - - default: - BUG(); - break; - } - -} - -/* - * rtc_from4_calculate_ecc - hardware specific code to read ECC code - * @mtd: MTD device structure - * @dat: buffer containing the data to generate ECC codes - * @ecc_code ECC codes calculated - * - * The ECC code is calculated by the FPGA. All we have to do is read the values - * from the FPGA registers. - * - * Note: We read from the inverted registers, since data is inverted before - * the code is calculated. So all 0xff data (blank page) results in all 0xff rs code - * - */ -static void rtc_from4_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) -{ - volatile unsigned short *rs_eccn = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECCN); - unsigned short value; - int i; - - for (i = 0; i < 8; i++) { - value = *rs_eccn; - ecc_code[i] = (unsigned char)value; - rs_eccn++; - } - ecc_code[7] |= 0x0f; /* set the last four bits (not used) */ -} - -/* - * rtc_from4_correct_data - hardware specific code to correct data using ECC code - * @mtd: MTD device structure - * @buf: buffer containing the data to generate ECC codes - * @ecc1 ECC codes read - * @ecc2 ECC codes calculated - * - * The FPGA tells us fast, if there's an error or not. If no, we go back happy - * else we read the ecc results from the fpga and call the rs library to decode - * and hopefully correct the error. - * - */ -static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_char *ecc1, u_char *ecc2) -{ - int i, j, res; - unsigned short status; - uint16_t par[6], syn[6]; - uint8_t ecc[8]; - volatile unsigned short *rs_ecc; - - status = *((volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC_CHK)); - - if (!(status & RTC_FROM4_RS_ECC_CHK_ERROR)) { - return 0; - } - - /* Read the syndrome pattern from the FPGA and correct the bitorder */ - rs_ecc = (volatile unsigned short *)(rtc_from4_fio_base + RTC_FROM4_RS_ECC); - for (i = 0; i < 8; i++) { - ecc[i] = bitrev8(*rs_ecc); - rs_ecc++; - } - - /* convert into 6 10bit syndrome fields */ - par[5] = rs_decoder->index_of[(((uint16_t) ecc[0] >> 0) & 0x0ff) | (((uint16_t) ecc[1] << 8) & 0x300)]; - par[4] = rs_decoder->index_of[(((uint16_t) ecc[1] >> 2) & 0x03f) | (((uint16_t) ecc[2] << 6) & 0x3c0)]; - par[3] = rs_decoder->index_of[(((uint16_t) ecc[2] >> 4) & 0x00f) | (((uint16_t) ecc[3] << 4) & 0x3f0)]; - par[2] = rs_decoder->index_of[(((uint16_t) ecc[3] >> 6) & 0x003) | (((uint16_t) ecc[4] << 2) & 0x3fc)]; - par[1] = rs_decoder->index_of[(((uint16_t) ecc[5] >> 0) & 0x0ff) | (((uint16_t) ecc[6] << 8) & 0x300)]; - par[0] = (((uint16_t) ecc[6] >> 2) & 0x03f) | (((uint16_t) ecc[7] << 6) & 0x3c0); - - /* Convert to computable syndrome */ - for (i = 0; i < 6; i++) { - syn[i] = par[0]; - for (j = 1; j < 6; j++) - if (par[j] != rs_decoder->nn) - syn[i] ^= rs_decoder->alpha_to[rs_modnn(rs_decoder, par[j] + i * j)]; - - /* Convert to index form */ - syn[i] = rs_decoder->index_of[syn[i]]; - } - - /* Let the library code do its magic. */ - res = decode_rs8(rs_decoder, (uint8_t *) buf, par, 512, syn, 0, NULL, 0xff, NULL); - if (res > 0) { - pr_debug("rtc_from4_correct_data: " "ECC corrected %d errors on read\n", res); - } - return res; -} - -/** - * rtc_from4_errstat - perform additional error status checks - * @mtd: MTD device structure - * @this: NAND chip structure - * @state: state or the operation - * @status: status code returned from read status - * @page: startpage inside the chip, must be called with (page & this->pagemask) - * - * Perform additional error status checks on erase and write failures - * to determine if errors are correctable. For this device, correctable - * 1-bit errors on erase and write are considered acceptable. - * - * note: see pages 34..37 of data sheet for details. - * - */ -static int rtc_from4_errstat(struct mtd_info *mtd, struct nand_chip *this, - int state, int status, int page) -{ - int er_stat = 0; - int rtn, retlen; - size_t len; - uint8_t *buf; - int i; - - this->cmdfunc(mtd, NAND_CMD_STATUS_CLEAR, -1, -1); - - if (state == FL_ERASING) { - - for (i = 0; i < 4; i++) { - if (!(status & 1 << (i + 1))) - continue; - this->cmdfunc(mtd, (NAND_CMD_STATUS_ERROR + i + 1), - -1, -1); - rtn = this->read_byte(mtd); - this->cmdfunc(mtd, NAND_CMD_STATUS_RESET, -1, -1); - - /* err_ecc_not_avail */ - if (!(rtn & ERR_STAT_ECC_AVAILABLE)) - er_stat |= 1 << (i + 1); - } - - } else if (state == FL_WRITING) { - - unsigned long corrected = mtd->ecc_stats.corrected; - - /* single bank write logic */ - this->cmdfunc(mtd, NAND_CMD_STATUS_ERROR, -1, -1); - rtn = this->read_byte(mtd); - this->cmdfunc(mtd, NAND_CMD_STATUS_RESET, -1, -1); - - if (!(rtn & ERR_STAT_ECC_AVAILABLE)) { - /* err_ecc_not_avail */ - er_stat |= 1 << 1; - goto out; - } - - len = mtd->writesize; - buf = kmalloc(len, GFP_KERNEL); - if (!buf) { - er_stat = 1; - goto out; - } - - /* recovery read */ - rtn = nand_do_read(mtd, page, len, &retlen, buf); - - /* if read failed or > 1-bit error corrected */ - if (rtn || (mtd->ecc_stats.corrected - corrected) > 1) - er_stat |= 1 << 1; - kfree(buf); - } -out: - rtn = status; - if (er_stat == 0) { /* if ECC is available */ - rtn = (status & ~NAND_STATUS_FAIL); /* clear the error bit */ - } - - return rtn; -} -#endif - -/* - * Main initialization routine - */ -static int __init rtc_from4_init(void) -{ - struct nand_chip *this; - unsigned short bcr1, bcr2, wcr2; - int i; - int ret; - - /* Allocate memory for MTD device structure and private data */ - rtc_from4_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); - if (!rtc_from4_mtd) { - printk("Unable to allocate Renesas NAND MTD device structure.\n"); - return -ENOMEM; - } - - /* Get pointer to private data */ - this = (struct nand_chip *)(&rtc_from4_mtd[1]); - - /* Initialize structures */ - memset(rtc_from4_mtd, 0, sizeof(struct mtd_info)); - memset(this, 0, sizeof(struct nand_chip)); - - /* Link the private data with the MTD structure */ - rtc_from4_mtd->priv = this; - rtc_from4_mtd->owner = THIS_MODULE; - - /* set area 5 as PCMCIA mode to clear the spec of tDH(Data hold time;9ns min) */ - bcr1 = *SH77X9_BCR1 & ~0x0002; - bcr1 |= 0x0002; - *SH77X9_BCR1 = bcr1; - - /* set */ - bcr2 = *SH77X9_BCR2 & ~0x0c00; - bcr2 |= 0x0800; - *SH77X9_BCR2 = bcr2; - - /* set area 5 wait states */ - wcr2 = *SH77X9_WCR2 & ~0x1c00; - wcr2 |= 0x1c00; - *SH77X9_WCR2 = wcr2; - - /* Set address of NAND IO lines */ - this->IO_ADDR_R = rtc_from4_fio_base; - this->IO_ADDR_W = rtc_from4_fio_base; - /* Set address of hardware control function */ - this->cmd_ctrl = rtc_from4_hwcontrol; - /* Set address of chip select function */ - this->select_chip = rtc_from4_nand_select_chip; - /* command delay time (in us) */ - this->chip_delay = 100; - /* return the status of the Ready/Busy line */ - this->dev_ready = rtc_from4_nand_device_ready; - -#ifdef RTC_FROM4_HWECC - printk(KERN_INFO "rtc_from4_init: using hardware ECC detection.\n"); - - this->ecc.mode = NAND_ECC_HW_SYNDROME; - this->ecc.size = 512; - this->ecc.bytes = 8; - this->ecc.strength = 3; - /* return the status of extra status and ECC checks */ - this->errstat = rtc_from4_errstat; - /* set the nand_oobinfo to support FPGA H/W error detection */ - this->ecc.layout = &rtc_from4_nand_oobinfo; - this->ecc.hwctl = rtc_from4_enable_hwecc; - this->ecc.calculate = rtc_from4_calculate_ecc; - this->ecc.correct = rtc_from4_correct_data; - - /* We could create the decoder on demand, if memory is a concern. - * This way we have it handy, if an error happens - * - * Symbolsize is 10 (bits) - * Primitve polynomial is x^10+x^3+1 - * first consecutive root is 0 - * primitve element to generate roots = 1 - * generator polinomial degree = 6 - */ - rs_decoder = init_rs(10, 0x409, 0, 1, 6); - if (!rs_decoder) { - printk(KERN_ERR "Could not create a RS decoder\n"); - ret = -ENOMEM; - goto err_1; - } -#else - printk(KERN_INFO "rtc_from4_init: using software ECC detection.\n"); - - this->ecc.mode = NAND_ECC_SOFT; -#endif - - /* set the bad block tables to support debugging */ - this->bbt_td = &rtc_from4_bbt_main_descr; - this->bbt_md = &rtc_from4_bbt_mirror_descr; - - /* Scan to find existence of the device */ - if (nand_scan(rtc_from4_mtd, RTC_FROM4_MAX_CHIPS)) { - ret = -ENXIO; - goto err_2; - } - - /* Perform 'device recovery' for each chip in case there was a power loss. */ - for (i = 0; i < this->numchips; i++) { - deplete(rtc_from4_mtd, i); - } - -#if RTC_FROM4_NO_VIRTBLOCKS - /* use a smaller erase block to minimize wasted space when a block is bad */ - /* note: this uses eight times as much RAM as using the default and makes */ - /* mounts take four times as long. */ - rtc_from4_mtd->flags |= MTD_NO_VIRTBLOCKS; -#endif - - /* Register the partitions */ - ret = mtd_device_register(rtc_from4_mtd, partition_info, - NUM_PARTITIONS); - if (ret) - goto err_3; - - /* Return happy */ - return 0; -err_3: - nand_release(rtc_from4_mtd); -err_2: - free_rs(rs_decoder); -err_1: - kfree(rtc_from4_mtd); - return ret; -} - -module_init(rtc_from4_init); - -/* - * Clean up routine - */ -static void __exit rtc_from4_cleanup(void) -{ - /* Release resource, unregister partitions */ - nand_release(rtc_from4_mtd); - - /* Free the MTD device structure */ - kfree(rtc_from4_mtd); - -#ifdef RTC_FROM4_HWECC - /* Free the reed solomon resources */ - if (rs_decoder) { - free_rs(rs_decoder); - } -#endif -} - -module_exit(rtc_from4_cleanup); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("d.marlin <dmarlin@redhat.com"); -MODULE_DESCRIPTION("Board-specific glue layer for AG-AND flash on Renesas FROM_BOARD4"); diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index 57b3971c9c0a..e57e18e8c289 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -1081,7 +1081,6 @@ static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev) return pdata; } #else /* CONFIG_OF */ -#define of_flctl_match NULL static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev) { return NULL; @@ -1219,22 +1218,11 @@ static struct platform_driver flctl_driver = { .driver = { .name = "sh_flctl", .owner = THIS_MODULE, - .of_match_table = of_flctl_match, + .of_match_table = of_match_ptr(of_flctl_match), }, }; -static int __init flctl_nand_init(void) -{ - return platform_driver_probe(&flctl_driver, flctl_probe); -} - -static void __exit flctl_nand_cleanup(void) -{ - platform_driver_unregister(&flctl_driver); -} - -module_init(flctl_nand_init); -module_exit(flctl_nand_cleanup); +module_platform_driver_probe(flctl_driver, flctl_probe); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Yoshihiro Shimoda"); diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c index 082bcdcd6bcf..e8181edebddd 100644 --- a/drivers/mtd/nand/sm_common.c +++ b/drivers/mtd/nand/sm_common.c @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <linux/mtd/nand.h> #include <linux/module.h> +#include <linux/sizes.h> #include "sm_common.h" static struct nand_ecclayout nand_oob_sm = { @@ -67,44 +68,37 @@ static int sm_block_markbad(struct mtd_info *mtd, loff_t ofs) return error; } - static struct nand_flash_dev nand_smartmedia_flash_ids[] = { - {"SmartMedia 1MiB 5V", 0x6e, 256, 1, 0x1000, 0}, - {"SmartMedia 1MiB 3,3V", 0xe8, 256, 1, 0x1000, 0}, - {"SmartMedia 1MiB 3,3V", 0xec, 256, 1, 0x1000, 0}, - {"SmartMedia 2MiB 3,3V", 0xea, 256, 2, 0x1000, 0}, - {"SmartMedia 2MiB 5V", 0x64, 256, 2, 0x1000, 0}, - {"SmartMedia 2MiB 3,3V ROM", 0x5d, 512, 2, 0x2000, NAND_ROM}, - {"SmartMedia 4MiB 3,3V", 0xe3, 512, 4, 0x2000, 0}, - {"SmartMedia 4MiB 3,3/5V", 0xe5, 512, 4, 0x2000, 0}, - {"SmartMedia 4MiB 5V", 0x6b, 512, 4, 0x2000, 0}, - {"SmartMedia 4MiB 3,3V ROM", 0xd5, 512, 4, 0x2000, NAND_ROM}, - {"SmartMedia 8MiB 3,3V", 0xe6, 512, 8, 0x2000, 0}, - {"SmartMedia 8MiB 3,3V ROM", 0xd6, 512, 8, 0x2000, NAND_ROM}, - {"SmartMedia 16MiB 3,3V", 0x73, 512, 16, 0x4000, 0}, - {"SmartMedia 16MiB 3,3V ROM", 0x57, 512, 16, 0x4000, NAND_ROM}, - {"SmartMedia 32MiB 3,3V", 0x75, 512, 32, 0x4000, 0}, - {"SmartMedia 32MiB 3,3V ROM", 0x58, 512, 32, 0x4000, NAND_ROM}, - {"SmartMedia 64MiB 3,3V", 0x76, 512, 64, 0x4000, 0}, - {"SmartMedia 64MiB 3,3V ROM", 0xd9, 512, 64, 0x4000, NAND_ROM}, - {"SmartMedia 128MiB 3,3V", 0x79, 512, 128, 0x4000, 0}, - {"SmartMedia 128MiB 3,3V ROM", 0xda, 512, 128, 0x4000, NAND_ROM}, - {"SmartMedia 256MiB 3,3V", 0x71, 512, 256, 0x4000 }, - {"SmartMedia 256MiB 3,3V ROM", 0x5b, 512, 256, 0x4000, NAND_ROM}, - {NULL,} + LEGACY_ID_NAND("SmartMedia 2MiB 3,3V ROM", 0x5d, 2, SZ_8K, NAND_ROM), + LEGACY_ID_NAND("SmartMedia 4MiB 3,3V", 0xe3, 4, SZ_8K, 0), + LEGACY_ID_NAND("SmartMedia 4MiB 3,3/5V", 0xe5, 4, SZ_8K, 0), + LEGACY_ID_NAND("SmartMedia 4MiB 5V", 0x6b, 4, SZ_8K, 0), + LEGACY_ID_NAND("SmartMedia 4MiB 3,3V ROM", 0xd5, 4, SZ_8K, NAND_ROM), + LEGACY_ID_NAND("SmartMedia 8MiB 3,3V", 0xe6, 8, SZ_8K, 0), + LEGACY_ID_NAND("SmartMedia 8MiB 3,3V ROM", 0xd6, 8, SZ_8K, NAND_ROM), + LEGACY_ID_NAND("SmartMedia 16MiB 3,3V", 0x73, 16, SZ_16K, 0), + LEGACY_ID_NAND("SmartMedia 16MiB 3,3V ROM", 0x57, 16, SZ_16K, NAND_ROM), + LEGACY_ID_NAND("SmartMedia 32MiB 3,3V", 0x75, 32, SZ_16K, 0), + LEGACY_ID_NAND("SmartMedia 32MiB 3,3V ROM", 0x58, 32, SZ_16K, NAND_ROM), + LEGACY_ID_NAND("SmartMedia 64MiB 3,3V", 0x76, 64, SZ_16K, 0), + LEGACY_ID_NAND("SmartMedia 64MiB 3,3V ROM", 0xd9, 64, SZ_16K, NAND_ROM), + LEGACY_ID_NAND("SmartMedia 128MiB 3,3V", 0x79, 128, SZ_16K, 0), + LEGACY_ID_NAND("SmartMedia 128MiB 3,3V ROM", 0xda, 128, SZ_16K, NAND_ROM), + LEGACY_ID_NAND("SmartMedia 256MiB 3, 3V", 0x71, 256, SZ_16K, 0), + LEGACY_ID_NAND("SmartMedia 256MiB 3,3V ROM", 0x5b, 256, SZ_16K, NAND_ROM), + {NULL} }; static struct nand_flash_dev nand_xd_flash_ids[] = { - - {"xD 16MiB 3,3V", 0x73, 512, 16, 0x4000, 0}, - {"xD 32MiB 3,3V", 0x75, 512, 32, 0x4000, 0}, - {"xD 64MiB 3,3V", 0x76, 512, 64, 0x4000, 0}, - {"xD 128MiB 3,3V", 0x79, 512, 128, 0x4000, 0}, - {"xD 256MiB 3,3V", 0x71, 512, 256, 0x4000, NAND_BROKEN_XD}, - {"xD 512MiB 3,3V", 0xdc, 512, 512, 0x4000, NAND_BROKEN_XD}, - {"xD 1GiB 3,3V", 0xd3, 512, 1024, 0x4000, NAND_BROKEN_XD}, - {"xD 2GiB 3,3V", 0xd5, 512, 2048, 0x4000, NAND_BROKEN_XD}, - {NULL,} + LEGACY_ID_NAND("xD 16MiB 3,3V", 0x73, 16, SZ_16K, 0), + LEGACY_ID_NAND("xD 32MiB 3,3V", 0x75, 32, SZ_16K, 0), + LEGACY_ID_NAND("xD 64MiB 3,3V", 0x76, 64, SZ_16K, 0), + LEGACY_ID_NAND("xD 128MiB 3,3V", 0x79, 128, SZ_16K, 0), + LEGACY_ID_NAND("xD 256MiB 3,3V", 0x71, 256, SZ_16K, NAND_BROKEN_XD), + LEGACY_ID_NAND("xD 512MiB 3,3V", 0xdc, 512, SZ_16K, NAND_BROKEN_XD), + LEGACY_ID_NAND("xD 1GiB 3,3V", 0xd3, 1024, SZ_16K, NAND_BROKEN_XD), + LEGACY_ID_NAND("xD 2GiB 3,3V", 0xd5, 2048, SZ_16K, NAND_BROKEN_XD), + {NULL} }; int sm_register_device(struct mtd_info *mtd, int smartmedia) diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c index e1e8748aa47b..7ed654c68b08 100644 --- a/drivers/mtd/nand/txx9ndfmc.c +++ b/drivers/mtd/nand/txx9ndfmc.c @@ -427,18 +427,7 @@ static struct platform_driver txx9ndfmc_driver = { }, }; -static int __init txx9ndfmc_init(void) -{ - return platform_driver_probe(&txx9ndfmc_driver, txx9ndfmc_probe); -} - -static void __exit txx9ndfmc_exit(void) -{ - platform_driver_unregister(&txx9ndfmc_driver); -} - -module_init(txx9ndfmc_init); -module_exit(txx9ndfmc_exit); +module_platform_driver_probe(txx9ndfmc_driver, txx9ndfmc_probe); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("TXx9 SoC NAND flash controller driver"); |