aboutsummaryrefslogtreecommitdiff
path: root/arch/ia64
AgeCommit message (Collapse)Author
2013-05-07Wrong asm register contraints in the kvm implementationStephan Schreiber
commit de53e9caa4c6149ef4a78c2f83d7f5b655848767 upstream. The Linux Kernel contains some inline assembly source code which has wrong asm register constraints in arch/ia64/kvm/vtlb.c. I observed this on Kernel 3.2.35 but it is also true on the most recent Kernel 3.9-rc1. File arch/ia64/kvm/vtlb.c: u64 guest_vhpt_lookup(u64 iha, u64 *pte) { u64 ret; struct thash_data *data; data = __vtr_lookup(current_vcpu, iha, D_TLB); if (data != NULL) thash_vhpt_insert(current_vcpu, data->page_flags, data->itir, iha, D_TLB); asm volatile ( "rsm psr.ic|psr.i;;" "srlz.d;;" "ld8.s r9=[%1];;" "tnat.nz p6,p7=r9;;" "(p6) mov %0=1;" "(p6) mov r9=r0;" "(p7) extr.u r9=r9,0,53;;" "(p7) mov %0=r0;" "(p7) st8 [%2]=r9;;" "ssm psr.ic;;" "srlz.d;;" "ssm psr.i;;" "srlz.d;;" : "=r"(ret) : "r"(iha), "r"(pte):"memory"); return ret; } The list of output registers is : "=r"(ret) : "r"(iha), "r"(pte):"memory"); The constraint "=r" means that the GCC has to maintain that these vars are in registers and contain valid info when the program flow leaves the assembly block (output registers). But "=r" also means that GCC can put them in registers that are used as input registers. Input registers are iha, pte on the example. If the predicate p7 is true, the 8th assembly instruction "(p7) mov %0=r0;" is the first one which writes to a register which is maintained by the register constraints; it sets %0. %0 means the first register operand; it is ret here. This instruction might overwrite the %2 register (pte) which is needed by the next instruction: "(p7) st8 [%2]=r9;;" Whether it really happens depends on how GCC decides what registers it uses and how it optimizes the code. The attached patch fixes the register operand constraints in arch/ia64/kvm/vtlb.c. The register constraints should be : "=&r"(ret) : "r"(iha), "r"(pte):"memory"); The & means that GCC must not use any of the input registers to place this output register in. This is Debian bug#702639 (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=702639). The patch is applicable on Kernel 3.9-rc1, 3.2.35 and many other versions. Signed-off-by: Stephan Schreiber <info@fs-driver.org> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07Wrong asm register contraints in the futex implementationStephan Schreiber
commit 136f39ddc53db3bcee2befbe323a56d4fbf06da8 upstream. The Linux Kernel contains some inline assembly source code which has wrong asm register constraints in arch/ia64/include/asm/futex.h. I observed this on Kernel 3.2.23 but it is also true on the most recent Kernel 3.9-rc1. File arch/ia64/include/asm/futex.h: static inline int futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval, u32 newval) { if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) return -EFAULT; { register unsigned long r8 __asm ("r8"); unsigned long prev; __asm__ __volatile__( " mf;; \n" " mov %0=r0 \n" " mov ar.ccv=%4;; \n" "[1:] cmpxchg4.acq %1=[%2],%3,ar.ccv \n" " .xdata4 \"__ex_table\", 1b-., 2f-. \n" "[2:]" : "=r" (r8), "=r" (prev) : "r" (uaddr), "r" (newval), "rO" ((long) (unsigned) oldval) : "memory"); *uval = prev; return r8; } } The list of output registers is : "=r" (r8), "=r" (prev) The constraint "=r" means that the GCC has to maintain that these vars are in registers and contain valid info when the program flow leaves the assembly block (output registers). But "=r" also means that GCC can put them in registers that are used as input registers. Input registers are uaddr, newval, oldval on the example. The second assembly instruction " mov %0=r0 \n" is the first one which writes to a register; it sets %0 to 0. %0 means the first register operand; it is r8 here. (The r0 is read-only and always 0 on the Itanium; it can be used if an immediate zero value is needed.) This instruction might overwrite one of the other registers which are still needed. Whether it really happens depends on how GCC decides what registers it uses and how it optimizes the code. The objdump utility can give us disassembly. The futex_atomic_cmpxchg_inatomic() function is inline, so we have to look for a module that uses the funtion. This is the cmpxchg_futex_value_locked() function in kernel/futex.c: static int cmpxchg_futex_value_locked(u32 *curval, u32 __user *uaddr, u32 uval, u32 newval) { int ret; pagefault_disable(); ret = futex_atomic_cmpxchg_inatomic(curval, uaddr, uval, newval); pagefault_enable(); return ret; } Now the disassembly. At first from the Kernel package 3.2.23 which has been compiled with GCC 4.4, remeber this Kernel seemed to work: objdump -d linux-3.2.23/debian/build/build_ia64_none_mckinley/kernel/futex.o 0000000000000230 <cmpxchg_futex_value_locked>: 230: 0b 18 80 1b 18 21 [MMI] adds r3=3168,r13;; 236: 80 40 0d 00 42 00 adds r8=40,r3 23c: 00 00 04 00 nop.i 0x0;; 240: 0b 50 00 10 10 10 [MMI] ld4 r10=[r8];; 246: 90 08 28 00 42 00 adds r9=1,r10 24c: 00 00 04 00 nop.i 0x0;; 250: 09 00 00 00 01 00 [MMI] nop.m 0x0 256: 00 48 20 20 23 00 st4 [r8]=r9 25c: 00 00 04 00 nop.i 0x0;; 260: 08 10 80 06 00 21 [MMI] adds r2=32,r3 266: 00 00 00 02 00 00 nop.m 0x0 26c: 02 08 f1 52 extr.u r16=r33,0,61 270: 05 40 88 00 08 e0 [MLX] addp4 r8=r34,r0 276: ff ff 0f 00 00 e0 movl r15=0xfffffffbfff;; 27c: f1 f7 ff 65 280: 09 70 00 04 18 10 [MMI] ld8 r14=[r2] 286: 00 00 00 02 00 c0 nop.m 0x0 28c: f0 80 1c d0 cmp.ltu p6,p7=r15,r16;; 290: 08 40 fc 1d 09 3b [MMI] cmp.eq p8,p9=-1,r14 296: 00 00 00 02 00 40 nop.m 0x0 29c: e1 08 2d d0 cmp.ltu p10,p11=r14,r33 2a0: 56 01 10 00 40 10 [BBB] (p10) br.cond.spnt.few 2e0 <cmpxchg_futex_value_locked+0xb0> 2a6: 02 08 00 80 21 03 (p08) br.cond.dpnt.few 2b0 <cmpxchg_futex_value_locked+0x80> 2ac: 40 00 00 41 (p06) br.cond.spnt.few 2e0 <cmpxchg_futex_value_locked+0xb0> 2b0: 0a 00 00 00 22 00 [MMI] mf;; 2b6: 80 00 00 00 42 00 mov r8=r0 2bc: 00 00 04 00 nop.i 0x0 2c0: 0b 00 20 40 2a 04 [MMI] mov.m ar.ccv=r8;; 2c6: 10 1a 85 22 20 00 cmpxchg4.acq r33=[r33],r35,ar.ccv 2cc: 00 00 04 00 nop.i 0x0;; 2d0: 10 00 84 40 90 11 [MIB] st4 [r32]=r33 2d6: 00 00 00 02 00 00 nop.i 0x0 2dc: 20 00 00 40 br.few 2f0 <cmpxchg_futex_value_locked+0xc0> 2e0: 09 40 c8 f9 ff 27 [MMI] mov r8=-14 2e6: 00 00 00 02 00 00 nop.m 0x0 2ec: 00 00 04 00 nop.i 0x0;; 2f0: 0b 58 20 1a 19 21 [MMI] adds r11=3208,r13;; 2f6: 20 01 2c 20 20 00 ld4 r18=[r11] 2fc: 00 00 04 00 nop.i 0x0;; 300: 0b 88 fc 25 3f 23 [MMI] adds r17=-1,r18;; 306: 00 88 2c 20 23 00 st4 [r11]=r17 30c: 00 00 04 00 nop.i 0x0;; 310: 11 00 00 00 01 00 [MIB] nop.m 0x0 316: 00 00 00 02 00 80 nop.i 0x0 31c: 08 00 84 00 br.ret.sptk.many b0;; The lines 2b0: 0a 00 00 00 22 00 [MMI] mf;; 2b6: 80 00 00 00 42 00 mov r8=r0 2bc: 00 00 04 00 nop.i 0x0 2c0: 0b 00 20 40 2a 04 [MMI] mov.m ar.ccv=r8;; 2c6: 10 1a 85 22 20 00 cmpxchg4.acq r33=[r33],r35,ar.ccv 2cc: 00 00 04 00 nop.i 0x0;; are the instructions of the assembly block. The line 2b6: 80 00 00 00 42 00 mov r8=r0 sets the r8 register to 0 and after that 2c0: 0b 00 20 40 2a 04 [MMI] mov.m ar.ccv=r8;; prepares the 'oldvalue' for the cmpxchg but it takes it from r8. This is wrong. What happened here is what I explained above: An input register is overwritten which is still needed. The register operand constraints in futex.h are wrong. (The problem doesn't occur when the Kernel is compiled with GCC 4.6.) The attached patch fixes the register operand constraints in futex.h. The code after patching of it: static inline int futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval, u32 newval) { if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) return -EFAULT; { register unsigned long r8 __asm ("r8") = 0; unsigned long prev; __asm__ __volatile__( " mf;; \n" " mov ar.ccv=%4;; \n" "[1:] cmpxchg4.acq %1=[%2],%3,ar.ccv \n" " .xdata4 \"__ex_table\", 1b-., 2f-. \n" "[2:]" : "+r" (r8), "=&r" (prev) : "r" (uaddr), "r" (newval), "rO" ((long) (unsigned) oldval) : "memory"); *uval = prev; return r8; } } I also initialized the 'r8' var with the C programming language. The _asm qualifier on the definition of the 'r8' var forces GCC to use the r8 processor register for it. I don't believe that we should use inline assembly for zeroing out a local variable. The constraint is "+r" (r8) what means that it is both an input register and an output register. Note that the page fault handler will modify the r8 register which will be the return value of the function. The real fix is "=&r" (prev) The & means that GCC must not use any of the input registers to place this output register in. Patched the Kernel 3.2.23 and compiled it with GCC4.4: 0000000000000230 <cmpxchg_futex_value_locked>: 230: 0b 18 80 1b 18 21 [MMI] adds r3=3168,r13;; 236: 80 40 0d 00 42 00 adds r8=40,r3 23c: 00 00 04 00 nop.i 0x0;; 240: 0b 50 00 10 10 10 [MMI] ld4 r10=[r8];; 246: 90 08 28 00 42 00 adds r9=1,r10 24c: 00 00 04 00 nop.i 0x0;; 250: 09 00 00 00 01 00 [MMI] nop.m 0x0 256: 00 48 20 20 23 00 st4 [r8]=r9 25c: 00 00 04 00 nop.i 0x0;; 260: 08 10 80 06 00 21 [MMI] adds r2=32,r3 266: 20 12 01 10 40 00 addp4 r34=r34,r0 26c: 02 08 f1 52 extr.u r16=r33,0,61 270: 05 40 00 00 00 e1 [MLX] mov r8=r0 276: ff ff 0f 00 00 e0 movl r15=0xfffffffbfff;; 27c: f1 f7 ff 65 280: 09 70 00 04 18 10 [MMI] ld8 r14=[r2] 286: 00 00 00 02 00 c0 nop.m 0x0 28c: f0 80 1c d0 cmp.ltu p6,p7=r15,r16;; 290: 08 40 fc 1d 09 3b [MMI] cmp.eq p8,p9=-1,r14 296: 00 00 00 02 00 40 nop.m 0x0 29c: e1 08 2d d0 cmp.ltu p10,p11=r14,r33 2a0: 56 01 10 00 40 10 [BBB] (p10) br.cond.spnt.few 2e0 <cmpxchg_futex_value_locked+0xb0> 2a6: 02 08 00 80 21 03 (p08) br.cond.dpnt.few 2b0 <cmpxchg_futex_value_locked+0x80> 2ac: 40 00 00 41 (p06) br.cond.spnt.few 2e0 <cmpxchg_futex_value_locked+0xb0> 2b0: 0b 00 00 00 22 00 [MMI] mf;; 2b6: 00 10 81 54 08 00 mov.m ar.ccv=r34 2bc: 00 00 04 00 nop.i 0x0;; 2c0: 09 58 8c 42 11 10 [MMI] cmpxchg4.acq r11=[r33],r35,ar.ccv 2c6: 00 00 00 02 00 00 nop.m 0x0 2cc: 00 00 04 00 nop.i 0x0;; 2d0: 10 00 2c 40 90 11 [MIB] st4 [r32]=r11 2d6: 00 00 00 02 00 00 nop.i 0x0 2dc: 20 00 00 40 br.few 2f0 <cmpxchg_futex_value_locked+0xc0> 2e0: 09 40 c8 f9 ff 27 [MMI] mov r8=-14 2e6: 00 00 00 02 00 00 nop.m 0x0 2ec: 00 00 04 00 nop.i 0x0;; 2f0: 0b 88 20 1a 19 21 [MMI] adds r17=3208,r13;; 2f6: 30 01 44 20 20 00 ld4 r19=[r17] 2fc: 00 00 04 00 nop.i 0x0;; 300: 0b 90 fc 27 3f 23 [MMI] adds r18=-1,r19;; 306: 00 90 44 20 23 00 st4 [r17]=r18 30c: 00 00 04 00 nop.i 0x0;; 310: 11 00 00 00 01 00 [MIB] nop.m 0x0 316: 00 00 00 02 00 80 nop.i 0x0 31c: 08 00 84 00 br.ret.sptk.many b0;; Much better. There is a 270: 05 40 00 00 00 e1 [MLX] mov r8=r0 which was generated by C code r8 = 0. Below 2b6: 00 10 81 54 08 00 mov.m ar.ccv=r34 what means that oldval is no longer overwritten. This is Debian bug#702641 (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=702641). The patch is applicable on Kernel 3.9-rc1, 3.2.23 and many other versions. Signed-off-by: Stephan Schreiber <info@fs-driver.org> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07Fix initialization of CMCI/CMCP interruptsTony Luck
commit d303e9e98fce56cdb3c6f2ac92f626fc2bd51c77 upstream. Back 2010 during a revamp of the irq code some initializations were moved from ia64_mca_init() to ia64_mca_late_init() in commit c75f2aa13f5b268aba369b5dc566088b5194377c Cannot use register_percpu_irq() from ia64_mca_init() But this was hideously wrong. First of all these initializations are now down far too late. Specifically after all the other cpus have been brought up and initialized their own CMC vectors from smp_callin(). Also ia64_mca_late_init() may be called from any cpu so the line: ia64_mca_cmc_vector_setup(); /* Setup vector on BSP */ is generally not executed on the BSP, and so the CMC vector isn't setup at all on that processor. Make use of the arch_early_irq_init() hook to get this code executed at just the right moment: not too early, not too late. Reported-by: Fred Hartnett <fred.hartnett@hp.com> Tested-by: Fred Hartnett <fred.hartnett@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "A nasty bug in fs/namespace.c caught by Andrey + a couple of less serious unpleasantness - ecryptfs misc device playing hopeless games with try_module_get() and palinfo procfs support being... not quite correctly done, to be polite." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: mnt: release locks on error path in do_loopback palinfo fixes procfs: add proc_remove_subtree() ecryptfs: close rmmod race
2013-04-09palinfo fixesAl Viro
* check for proc_mkdir() failures * fix buffer overrun - sizeof(format string) is *not* enough to hold sprintf() result. * use proc_remove_subtree(); life's much easier with it Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-29ia64 idle: delete stale (*idle)() function pointerLen Brown
Commit 3e7fc708eb41 ("ia64 idle: delete pm_idle") in 3.9-rc1 didn't finish the job, leaving an un-initialized reference to (*idle)(). [ Haven't seen a crash from this - but seems like we are just being lucky that "idle" is zero so it does get initialized before we jump to randomland - Len ] Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-12Select VIRT_TO_BUS directly where neededStephen Rothwell
In commit 887cbce0adea ("arch Kconfig: centralise ARCH_NO_VIRT_TO_BUS") I introduced the config sybmol HAVE_VIRT_TO_BUS and selected that where needed. I am not sure what I was thinking. Instead, just directly select VIRT_TO_BUS where it is needed. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-03fs: Limit sys_mount to only request filesystem modules.Eric W. Biederman
Modify the request_module to prefix the file system type with "fs-" and add aliases to all of the filesystems that can be built as modules to match. A common practice is to build all of the kernel code and leave code that is not commonly needed as modules, with the result that many users are exposed to any bug anywhere in the kernel. Looking for filesystems with a fs- prefix limits the pool of possible modules that can be loaded by mount to just filesystems trivially making things safer with no real cost. Using aliases means user space can control the policy of which filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf with blacklist and alias directives. Allowing simple, safe, well understood work-arounds to known problematic software. This also addresses a rare but unfortunate problem where the filesystem name is not the same as it's module name and module auto-loading would not work. While writing this patch I saw a handful of such cases. The most significant being autofs that lives in the module autofs4. This is relevant to user namespaces because we can reach the request module in get_fs_type() without having any special permissions, and people get uncomfortable when a user specified string (in this case the filesystem type) goes all of the way to request_module. After having looked at this issue I don't think there is any particular reason to perform any filtering or permission checks beyond making it clear in the module request that we want a filesystem module. The common pattern in the kernel is to call request_module() without regards to the users permissions. In general all a filesystem module does once loaded is call register_filesystem() and go to sleep. Which means there is not much attack surface exposed by loading a filesytem module unless the filesystem is mounted. In a user namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT, which most filesystems do not set today. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Kees Cook <keescook@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUSStephen Rothwell
Change it to CONFIG_HAVE_VIRT_TO_BUS and set it in all architecures that already provide virt_to_bus(). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-26default SET_PERSONALITY() in linux/elf.hAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-25Merge tag 'pci-v3.9-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu) - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu) - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu) - Stop caching _PRT and make independent of bus numbers (Yinghai Lu) PCI device hotplug - Clean up cpqphp dead code (Sasha Levin) - Disable ARI unless device and upstream bridge support it (Yijing Wang) - Initialize all hot-added devices (not functions 0-7) (Yijing Wang) Power management - Don't touch ASPM if disabled (Joe Lawrence) - Fix ASPM link state management (Myron Stowe) Miscellaneous - Fix PCI_EXP_FLAGS accessor (Alex Williamson) - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov) - Document hotplug resource and MPS parameters (Yijing Wang) - Add accessor for PCIe capabilities (Myron Stowe) - Drop pciehp suspend/resume messages (Paul Bolle) - Make pci_slot built-in only (not a module) (Jiang Liu) - Remove unused PCI/ACPI bind ops (Jiang Liu) - Removed used pci_root_bus (Bjorn Helgaas)" * tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS ACPI / PCI: Make pci_slot built-in only, not a module PCI/PM: Clear state_saved during suspend PCI: Use atomic_inc_return() rather than atomic_add_return() PCI: Catch attempts to disable already-disabled devices PCI: Disable Bus Master unconditionally in pci_device_shutdown() PCI: acpiphp: Remove dead code for PCI host bridge hotplug PCI: acpiphp: Create companion ACPI devices before creating PCI devices PCI: Remove unused "rc" in virtfn_add_bus() PCI: pciehp: Drop suspend/resume ENTRY messages PCI/ASPM: Don't touch ASPM if forcibly disabled PCI/ASPM: Deallocate upstream link state even if device is not PCIe PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc PCI: Document hpiosize= and hpmemsize= resource reservation parameters PCI: Use PCI Express Capability accessor PCI: Introduce accessor to retrieve PCIe Capabilities Register PCI: Put pci_dev in device tree as early as possible PCI: Skip attaching driver in device_add() PCI: acpiphp: Keep driver loaded even if no slots found ...
2013-02-25Merge tag 'please-pull-vm_unwrapped' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 update from Tony Luck: "ia64 vm patch series that was cooking in -mm tree" * tag 'please-pull-vm_unwrapped' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: mm: use vm_unmapped_area() in hugetlbfs on ia64 architecture mm: use vm_unmapped_area() on ia64 architecture
2013-02-25Merge tag 'modules-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module update from Rusty Russell: "The sweeping change is to make add_taint() explicitly indicate whether to disable lockdep, but it's a mechanical change." * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: MODSIGN: Add option to not sign modules during modules_install MODSIGN: Add -s <signature> option to sign-file MODSIGN: Specify the hash algorithm on sign-file command line MODSIGN: Simplify Makefile with a Kconfig helper module: clean up load_module a little more. modpost: Ignore ARC specific non-alloc sections module: constify within_module_* taint: add explicit flag to show whether lock dep is still OK. module: printk message when module signature fail taints kernel.
2013-02-24Merge tag 'kvm-3.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Marcelo Tosatti: "KVM updates for the 3.9 merge window, including x86 real mode emulation fixes, stronger memory slot interface restrictions, mmu_lock spinlock hold time reduction, improved handling of large page faults on shadow, initial APICv HW acceleration support, s390 channel IO based virtio, amongst others" * tag 'kvm-3.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (143 commits) Revert "KVM: MMU: lazily drop large spte" x86: pvclock kvm: align allocation size to page size KVM: nVMX: Remove redundant get_vmcs12 from nested_vmx_exit_handled_msr x86 emulator: fix parity calculation for AAD instruction KVM: PPC: BookE: Handle alignment interrupts booke: Added DBCR4 SPR number KVM: PPC: booke: Allow multiple exception types KVM: PPC: booke: use vcpu reference from thread_struct KVM: Remove user_alloc from struct kvm_memory_slot KVM: VMX: disable apicv by default KVM: s390: Fix handling of iscs. KVM: MMU: cleanup __direct_map KVM: MMU: remove pt_access in mmu_set_spte KVM: MMU: cleanup mapping-level KVM: MMU: lazily drop large spte KVM: VMX: cleanup vmx_set_cr0(). KVM: VMX: add missing exit names to VMX_EXIT_REASONS array KVM: VMX: disable SMEP feature when guest is in non-paging mode KVM: Remove duplicate text in api.txt Revert "KVM: MMU: split kvm_mmu_free_page" ...
2013-02-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull signal handling cleanups from Al Viro: "This is the first pile; another one will come a bit later and will contain SYSCALL_DEFINE-related patches. - a bunch of signal-related syscalls (both native and compat) unified. - a bunch of compat syscalls switched to COMPAT_SYSCALL_DEFINE (fixing several potential problems with missing argument validation, while we are at it) - a lot of now-pointless wrappers killed - a couple of architectures (cris and hexagon) forgot to save altstack settings into sigframe, even though they used the (uninitialized) values in sigreturn; fixed. - microblaze fixes for delivery of multiple signals arriving at once - saner set of helpers for signal delivery introduced, several architectures switched to using those." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (143 commits) x86: convert to ksignal sparc: convert to ksignal arm: switch to struct ksignal * passing alpha: pass k_sigaction and siginfo_t using ksignal pointer burying unused conditionals make do_sigaltstack() static arm64: switch to generic old sigaction() (compat-only) arm64: switch to generic compat rt_sigaction() arm64: switch compat to generic old sigsuspend arm64: switch to generic compat rt_sigqueueinfo() arm64: switch to generic compat rt_sigpending() arm64: switch to generic compat rt_sigprocmask() arm64: switch to generic sigaltstack sparc: switch to generic old sigsuspend sparc: COMPAT_SYSCALL_DEFINE does all sign-extension as well as SYSCALL_DEFINE sparc: kill sign-extending wrappers for native syscalls kill sparc32_open() sparc: switch to use of generic old sigaction sparc: switch sys_compat_rt_sigaction() to COMPAT_SYSCALL_DEFINE mips: switch to generic sys_fork() and sys_clone() ...
2013-02-23ia64: use %ld to print pages calculated in nr_free_buffer_pagesZhang Yanfei
Now the function nr_free_buffer_pages returns unsigned long, so use %ld to print its return value. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23memory-hotplug: remove memmap of sparse-vmemmapTang Chen
Introduce a new API vmemmap_free() to free and remove vmemmap pagetables. Since pagetable implements are different, each architecture has to provide its own version of vmemmap_free(), just like vmemmap_populate(). Note: vmemmap_free() is not implemented for ia64, ppc, s390, and sparc. [mhocko@suse.cz: fix implicit declaration of remove_pagetable] Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Jianguo Wu <wujianguo@huawei.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23memory-hotplug: implement register_page_bootmem_info_section of sparse-vmemmapYasuaki Ishimatsu
For removing memmap region of sparse-vmemmap which is allocated bootmem, memmap region of sparse-vmemmap needs to be registered by get_page_bootmem(). So the patch searches pages of virtual mapping and registers the pages by get_page_bootmem(). NOTE: register_page_bootmem_memmap() is not implemented for ia64, ppc, s390, and sparc. So introduce CONFIG_HAVE_BOOTMEM_INFO_NODE and revert register_page_bootmem_info_node() when platform doesn't support it. It's implemented by adding a new Kconfig option named CONFIG_HAVE_BOOTMEM_INFO_NODE, which will be automatically selected by memory-hotplug feature fully supported archs(currently only on x86_64). Since we have 2 config options called MEMORY_HOTPLUG and MEMORY_HOTREMOVE used for memory hot-add and hot-remove separately, and codes in function register_page_bootmem_info_node() are only used for collecting infomation for hot-remove, so reside it under MEMORY_HOTREMOVE. Besides page_isolation.c selected by MEMORY_ISOLATION under MEMORY_HOTPLUG is also such case, move it too. [mhocko@suse.cz: put register_page_bootmem_memmap inside CONFIG_MEMORY_HOTPLUG_SPARSE] [linfeng@cn.fujitsu.com: introduce CONFIG_HAVE_BOOTMEM_INFO_NODE and revert register_page_bootmem_info_node()] [mhocko@suse.cz: remove the arch specific functions without any implementation] [linfeng@cn.fujitsu.com: mm/Kconfig: move auto selects from MEMORY_HOTPLUG to MEMORY_HOTREMOVE as needed] [rientjes@google.com: fix defined but not used warning] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Wu Jianguo <wujianguo@huawei.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Lin Feng <linfeng@cn.fujitsu.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23memory-hotplug: introduce new arch_remove_memory() for removing page tableWen Congyang
For removing memory, we need to remove page tables. But it depends on architecture. So the patch introduce arch_remove_memory() for removing page table. Now it only calls __remove_pages(). Note: __remove_pages() for some archtecuture is not implemented (I don't know how to implement it for s390). Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22fs: Preserve error code in get_empty_filp(), part 2Anatol Pomozov
Allocating a file structure in function get_empty_filp() might fail because of several reasons: - not enough memory for file structures - operation is not allowed - user is over its limit Currently the function returns NULL in all cases and we loose the exact reason of the error. All callers of get_empty_filp() assume that the function can fail with ENFILE only. Return error through pointer. Change all callers to preserve this error code. [AV: cleaned up a bit, carved the get_empty_filp() part out into a separate commit (things remaining here deal with alloc_file()), removed pipe(2) behaviour change] Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22new helper: file_inode(file)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22mm: use vm_unmapped_area() in hugetlbfs on ia64 architectureMichel Lespinasse
Update the ia64 hugetlb_get_unmapped_area function to make use of vm_unmapped_area() instead of implementing a brute force search. Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-02-22mm: use vm_unmapped_area() on ia64 architectureMichel Lespinasse
Update the ia64 arch_get_unmapped_area function to make use of vm_unmapped_area() instead of implementing a brute force search. Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-02-21Merge tag 'please-pull-misc-3.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull misc ia64 bits from Tony Luck. * tag 'please-pull-misc-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: MAINTAINERS: update SGI & ia64 Altix stuff sysctl: Enable IA64 "ignore-unaligned-usertrap" to be used cross-arch
2013-02-21Merge tag 'tty-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial patches from Greg Kroah-Hartman: "Here's the big tty/serial driver patches for 3.9-rc1. More tty port rework and fixes from Jiri here, as well as lots of individual serial driver updates and fixes. All of these have been in the linux-next tree for a while." * tag 'tty-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: mxser: improve error handling in mxser_probe() and mxser_module_init() serial: imx: fix uninitialized variable warning serial: tegra: assume CONFIG_OF TTY: do not update atime/mtime on read/write lguest: select CONFIG_TTY to build properly. ARM defconfigs: add missing inclusions of linux/platform_device.h fb/exynos: include platform_device.h ARM: sa1100/assabet: include platform_device.h directly serial: imx: Fix recursive locking bug pps: Fix build breakage from decoupling pps from tty tty: Remove ancient hardpps() pps: Additional cleanups in uart_handle_dcd_change pps: Move timestamp read into PPS code proper pps: Don't crash the machine when exiting will do pps: Fix a use-after free bug when unregistering a source. pps: Use pps_lookup_dev to reduce ldisc coupling pps: Add pps_lookup_dev() function tty: serial: uartlite: Support uartlite on big and little endian systems tty: serial: uartlite: Fix sparse and checkpatch warnings serial/arc-uart: Miscll DT related updates (Grant's review comments) ... Fix up trivial conflicts, mostly just due to the TTY config option clashing with the EXPERIMENTAL removal.
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking update from David Miller: 1) Checkpoint/restarted TCP sockets now can properly propagate the TCP timestamp offset. From Andrey Vagin. 2) VMWARE VM VSOCK layer, from Andy King. 3) Much improved support for virtual functions and SR-IOV in bnx2x, from Ariel ELior. 4) All protocols on ipv4 and ipv6 are now network namespace aware, and all the compatability checks for initial-namespace-only protocols is removed. Thanks to Tom Parkin for helping deal with the last major holdout, L2TP. 5) IPV6 support in netpoll and network namespace support in pktgen, from Cong Wang. 6) Multiple Registration Protocol (MRP) and Multiple VLAN Registration Protocol (MVRP) support, from David Ward. 7) Compute packet lengths more accurately in the packet scheduler, from Eric Dumazet. 8) Use per-task page fragment allocator in skb_append_datato_frags(), also from Eric Dumazet. 9) Add support for connection tracking labels in netfilter, from Florian Westphal. 10) Fix default multicast group joining on ipv6, and add anti-spoofing checks to 6to4 and 6rd. From Hannes Frederic Sowa. 11) Make ipv4/ipv6 fragmentation memory limits more reasonable in modern times, rearrange inet frag datastructures for better cacheline locality, and move more operations outside of locking. From Jesper Dangaard Brouer. 12) Instead of strict master <--> slave relationships, allow arbitrary scenerios with "upper device lists". From Jiri Pirko. 13) Improve rate limiting accuracy in TBF and act_police, also from Jiri Pirko. 14) Add a BPF filter netfilter match target, from Willem de Bruijn. 15) Orphan and delete a bunch of pre-historic networking drivers from Paul Gortmaker. 16) Add TSO support for GRE tunnels, from Pravin B SHelar. Although this still needs some minor bug fixing before it's %100 correct in all cases. 17) Handle unresolved IPSEC states like ARP, with a resolution packet queue. From Steffen Klassert. 18) Remove TCP Appropriate Byte Count support (ABC), from Stephen Hemminger. This was long overdue. 19) Support SO_REUSEPORT, from Tom Herbert. 20) Allow locking a socket BPF filter, so that it cannot change after a process drops capabilities. 21) Add VLAN filtering to bridge, from Vlad Yasevich. 22) Bring ipv6 on-par with ipv4 and do not cache neighbour entries in the ipv6 routes, from YOSHIFUJI Hideaki. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1538 commits) ipv6: fix race condition regarding dst->expires and dst->from. net: fix a wrong assignment in skb_split() ip_gre: remove an extra dst_release() ppp: set qdisc_tx_busylock to avoid LOCKDEP splat atl1c: restore buffer state net: fix a build failure when !CONFIG_PROC_FS net: ipv4: fix waring -Wunused-variable net: proc: fix build failed when procfs is not configured Revert "xen: netback: remove redundant xenvif_put" net: move procfs code to net/core/net-procfs.c qmi_wwan, cdc-ether: add ADU960S bonding: set sysfs device_type to 'bond' bonding: fix bond_release_all inconsistencies b44: use netdev_alloc_skb_ip_align() xen: netback: remove redundant xenvif_put net: fec: Do a sanity check on the gpio number ip_gre: propogate target device GSO capability to the tunnel device ip_gre: allow CSUM capable devices to handle packets bonding: Fix initialize after use for 3ad machine state spinlock bonding: Fix race condition between bond_enslave() and bond_3ad_update_lacp_rate() ...
2013-02-20Merge tag 'pm+acpi-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: - Rework of the ACPI namespace scanning code from Rafael J. Wysocki with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg, Toshi Kani, and Yinghai Lu. - ACPI power resources handling and ACPI device PM update from Rafael J Wysocki. - ACPICA update to version 20130117 from Bob Moore and Lv Zheng with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner. - Support for Intel Lynxpoint LPSS from Mika Westerberg. - cpuidle update from Len Brown including Intel Haswell support, C1 state for intel_idle, removal of global pm_idle. - cpuidle fixes and cleanups from Daniel Lezcano. - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with contributions from Stratos Karafotis and Rickard Andersson. - Intel P-states driver for Sandy Bridge processors from Dirk Brandewie. - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn. - cpufreq fixes related to ordering issues between acpi-cpufreq and powernow-k8 from Borislav Petkov and Matthew Garrett. - cpufreq support for Calxeda Highbank processors from Mark Langsdorf and Rob Herring. - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update from Shawn Guo. - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat, and Inderpal Singh. - Support for "lightweight suspend" from Zhang Rui. - Removal of the deprecated power trace API from Paul Gortmaker. - Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki Ishimatsu. * tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits) PM idle: remove global declaration of pm_idle unicore32 idle: delete stray pm_idle comment openrisc idle: delete pm_idle mn10300 idle: delete pm_idle microblaze idle: delete pm_idle m32r idle: delete pm_idle, and other dead idle code ia64 idle: delete pm_idle cris idle: delete idle and pm_idle ARM64 idle: delete pm_idle ARM idle: delete pm_idle blackfin idle: delete pm_idle sparc idle: rename pm_idle to sparc_idle sh idle: rename global pm_idle to static sh_idle x86 idle: rename global pm_idle to static x86_idle APM idle: register apm_cpu_idle via cpuidle cpufreq / intel_pstate: Add kernel command line option disable intel_pstate. cpufreq / intel_pstate: Change to disallow module build tools/power turbostat: display SMI count by default intel_idle: export both C1 and C1E ACPI / hotplug: Fix concurrency issues and memory leaks ...
2013-02-19Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "Main changes: - scheduler side full-dynticks (user-space execution is undisturbed and receives no timer IRQs) preparation changes that convert the cputime accounting code to be full-dynticks ready, from Frederic Weisbecker. - Initial sched.h split-up changes, by Clark Williams - select_idle_sibling() performance improvement by Mike Galbraith: " 1 tbench pair (worst case) in a 10 core + SMT package: pre 15.22 MB/sec 1 procs post 252.01 MB/sec 1 procs " - sched_rr_get_interval() ABI fix/change. We think this detail is not used by apps (so it's not an ABI in practice), but lets keep it under observation. - misc RT scheduling cleanups, optimizations" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched/rt: Add <linux/sched/rt.h> header to <linux/init_task.h> cputime: Remove irqsave from seqlock readers sched, powerpc: Fix sched.h split-up build failure cputime: Restore CPU_ACCOUNTING config defaults for PPC64 sched/rt: Move rt specific bits into new header file sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice sched: Move sched.h sysctl bits into separate header sched: Fix signedness bug in yield_to() sched: Fix select_idle_sibling() bouncing cow syndrome sched/rt: Further simplify pick_rt_task() sched/rt: Do not account zero delta_exec in update_curr_rt() cputime: Safely read cputime of full dynticks CPUs kvm: Prepare to add generic guest entry/exit callbacks cputime: Use accessors to read task cputime stats cputime: Allow dynamic switch between tick/virtual based cputime accounting cputime: Generic on-demand virtual cputime accounting cputime: Move default nsecs_to_cputime() to jiffies based cputime file cputime: Librarize per nsecs resolution cputime definitions cputime: Avoid multiplication overflow on utime scaling context_tracking: Export context state for generic vtime ... Fix up conflict in kernel/context_tracking.c due to comment additions.
2013-02-19Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq core changes from Ingo Molnar: "The biggest changes are the IRQ-work and printk changes from Frederic Weisbecker, which prepare the code for 'full dynticks' (the ability to stop or slow down the periodic tick arbitrarily, not just in idle time as today): - Don't stop tick with irq works pending. This fix is generally useful and concerns archs that can't raise self IPIs. - Flush irq works before CPU offlining. - Introduce "lazy" irq works that can wait for the next tick to be executed, unless it's stopped. - Implement klogd wake up using irq work. This removes the ad-hoc printk_tick()/printk_needs_cpu() hooks and make it working even in dynticks mode. - Cleanups and fixes." * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Export enable/disable_percpu_irq() arch Kconfig: Remove references to IRQ_PER_CPU irq_work: Remove return value from the irq_work_queue() function genirq: Avoid deadlock in spurious handling printk: Wake up klogd using irq_work irq_work: Make self-IPIs optable irq_work: Warn if there's still work on cpu_down irq_work: Flush work on CPU_DYING irq_work: Don't stop the tick with pending works nohz: Add API to check tick state irq_work: Remove CONFIG_HAVE_IRQ_WORK irq_work: Fix racy check on work pending flag irq_work: Fix racy IRQ_WORK_BUSY flag setting
2013-02-18Merge branch 'release' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (35 commits) PM idle: remove global declaration of pm_idle unicore32 idle: delete stray pm_idle comment openrisc idle: delete pm_idle mn10300 idle: delete pm_idle microblaze idle: delete pm_idle m32r idle: delete pm_idle, and other dead idle code ia64 idle: delete pm_idle cris idle: delete idle and pm_idle ARM64 idle: delete pm_idle ARM idle: delete pm_idle blackfin idle: delete pm_idle sparc idle: rename pm_idle to sparc_idle sh idle: rename global pm_idle to static sh_idle x86 idle: rename global pm_idle to static x86_idle APM idle: register apm_cpu_idle via cpuidle tools/power turbostat: display SMI count by default intel_idle: export both C1 and C1E cpuidle: remove vestage definition of cpuidle_state_usage.driver_data x86 idle: remove 32-bit-only "no-hlt" parameter, hlt_works_ok flag x86 idle: remove mwait_idle() and "idle=mwait" cmdline param ... Conflicts: arch/x86/kernel/process.c (with PM / tracing commit 43720bd) drivers/acpi/processor_idle.c (with ACPICA commit 4f84291)
2013-02-17ia64 idle: delete pm_idleLen Brown
pm_idle() on ia64 was a synonym for default_idle(). So simply invoke default_idle() directly. Signed-off-by: Len Brown <len.brown@intel.com> Cc: linux-ia64@vger.kernel.org
2013-02-14burying unused conditionalsAl Viro
__ARCH_WANT_SYS_RT_SIGACTION, __ARCH_WANT_SYS_RT_SIGSUSPEND, __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND, __ARCH_WANT_COMPAT_SYS_SCHED_RR_GET_INTERVAL - not used anymore CONFIG_GENERIC_{SIGALTSTACK,COMPAT_RT_SIG{ACTION,QUEUEINFO,PENDING,PROCMASK}} - can be assumed always set.
2013-02-05Merge tag 'full-dynticks-cputime-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into sched/core Pull full-dynticks (user-space execution is undisturbed and receives no timer IRQs) preparation changes that convert the cputime accounting code to be full-dynticks ready, from Frederic Weisbecker: "This implements the cputime accounting on full dynticks CPUs. Typical cputime stats infrastructure relies on the timer tick and its periodic polling on the CPU to account the amount of time spent by the CPUs and the tasks per high level domains such as userspace, kernelspace, guest, ... Now we are preparing to implement full dynticks capability on Linux for Real Time and HPC users who want full CPU isolation. This feature requires a cputime accounting that doesn't depend on the timer tick. To implement it, this new cputime infrastructure plugs into kernel/user/guest boundaries to take snapshots of cputime and flush these to the stats when needed. This performs pretty much like CONFIG_VIRT_CPU_ACCOUNTING except that context location and cputime snaphots are synchronized between write and read side such that the latter can safely retrieve the pending tickless cputime of a task and add it to its latest cputime snapshot to return the correct result to the user." Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-04arch Kconfig: Remove references to IRQ_PER_CPUJames Hogan
The IRQ_PER_CPU Kconfig symbol was removed in the following commit: Commit 6a58fb3bad099076f36f0f30f44507bc3275cdb6 ("genirq: Remove CONFIG_IRQ_PER_CPU") merged in v2.6.39-rc1. But IRQ_PER_CPU wasn't removed from any of the architecture Kconfig files where it was defined or selected. It's completely unused so remove the remaining references. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: <uclinux-dist-devel@blackfin.uclinux.org> Cc: <linux-mips@linux-mips.org> Cc: <linuxppc-dev@lists.ozlabs.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Tony Luck <tony.luck@intel.com> Acked-by: Richard Kuo <rkuo@codeaurora.org> Link: http://lkml.kernel.org/r/1359972583-17134-1-git-send-email-james.hogan@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-02-03ia64: switch to generic sigaltstackAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03consolidate kernel-side struct sigaction declarationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03consolidate declarations of k_sigactionAl Viro
Only alpha and sparc are unusual - they have ka_restorer in it. And nobody needs that exposed to userland. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03sanitize rt_sigaction() situation a bitAl Viro
Switch from __ARCH_WANT_SYS_RT_SIGACTION to opposite (!CONFIG_ODD_RT_SIGACTION); the only two architectures that need it are alpha and sparc. The reason for use of CONFIG_... instead of __ARCH_... is that it's needed only kernel-side and doing it that way avoids a mess with include order on many architectures. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Bring in the 'net' tree so that we can get some ipv4/ipv6 bug fixes that some net-next work will build upon. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29Merge branch 'acpi-lpss' into acpi-cleanupRafael J. Wysocki
The following commits depend on the 'acpi-lpss' material.
2013-01-29x86, apicv: add virtual interrupt delivery supportYang Zhang
Virtual interrupt delivery avoids KVM to inject vAPIC interrupts manually, which is fully taken care of by the hardware. This needs some special awareness into existing interrupr injection path: - for pending interrupt, instead of direct injection, we may need update architecture specific indicators before resuming to guest. - A pending interrupt, which is masked by ISR, should be also considered in above update action, since hardware will decide when to inject it at right time. Current has_interrupt and get_interrupt only returns a valid vector from injection p.o.v. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-27kvm: Prepare to add generic guest entry/exit callbacksFrederic Weisbecker
Do some ground preparatory work before adding guest_enter() and guest_exit() context tracking callbacks. Those will be later used to read the guest cputime safely when we run in full dynticks mode. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Gleb Natapov <gleb@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-01-27cputime: Generic on-demand virtual cputime accountingFrederic Weisbecker
If we want to stop the tick further idle, we need to be able to account the cputime without using the tick. Virtual based cputime accounting solves that problem by hooking into kernel/user boundaries. However implementing CONFIG_VIRT_CPU_ACCOUNTING require low level hooks and involves more overhead. But we already have a generic context tracking subsystem that is required for RCU needs by archs which plan to shut down the tick outside idle. This patch implements a generic virtual based cputime accounting that relies on these generic kernel/user hooks. There are some upsides of doing this: - This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING if context tracking is already built (already necessary for RCU in full tickless mode). - We can rely on the generic context tracking subsystem to dynamically (de)activate the hooks, so that we can switch anytime between virtual and tick based accounting. This way we don't have the overhead of the virtual accounting when the tick is running periodically. And one downside: - There is probably more overhead than a native virtual based cputime accounting. But this relies on hooks that are already set anyway. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-01-27cputime: Librarize per nsecs resolution cputime definitionsFrederic Weisbecker
The full dynticks cputime accounting that we'll soon introduce will rely on sched_clock(). And its clock can have a per nanosecond granularity. To prepare for this, we need to have a cputime_t implementation that has this precision. ia64 virtual cputime accounting already uses that granularity so all we need is to librarize its implementation in the asm generic headers. Also librarize the default per jiffy granularity cputime_t as well so that we can easily pick either implementation depending on the cputime accounting config we choose. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com>
2013-01-25Merge 3.8-rc5 into driver-core-nextGreg Kroah-Hartman
This resolves a gpio driver merge issue pointed out in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-26ACPI: Remove useless type argument of driver .remove() operationRafael J. Wysocki
The second argument of ACPI driver .remove() operation is only used by the ACPI processor driver and the value passed to that driver through it is always available from the given struct acpi_device object's removal_type field. For this reason, the second ACPI driver .remove() argument is in fact useless, so drop it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-01-25Merge 3.8-rc5 into tty-nextGreg Kroah-Hartman
This resolves a number of tty driver merge issues found in linux-next Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>