Merge tag 'v3.14.20' into linux-linaro-lsk-v3.14

This is the 3.14.20 stable release

4 files changed, 16 insertions, 8 deletions

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 142ebd8a29c5..992ca7d2f14d 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -970,8 +970,6 @@ rescan:
 	}
 
 	qh->exception = 1;
-	if (ehci->rh_state < EHCI_RH_RUNNING)
-		qh->qh_state = QH_STATE_IDLE;
 	switch (qh->qh_state) {
 	case QH_STATE_LINKED:
 		WARN_ON(!list_empty(&qh->qtd_list));
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 9992fbfec85f..93fe089cd51a 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -470,7 +470,8 @@ static void xhci_hub_report_usb2_link_state(u32 *status, u32 status_reg)
 }
 
 /* Updates Link Status for super Speed port */
-static void xhci_hub_report_usb3_link_state(u32 *status, u32 status_reg)
+static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci,
+		u32 *status, u32 status_reg)
 {
 	u32 pls = status_reg & PORT_PLS_MASK;
 
@@ -509,7 +510,8 @@ static void xhci_hub_report_usb3_link_state(u32 *status, u32 status_reg)
 		 * in which sometimes the port enters compliance mode
 		 * caused by a delay on the host-device negotiation.
 		 */
-		if (pls == USB_SS_PORT_LS_COMP_MOD)
+		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+				(pls == USB_SS_PORT_LS_COMP_MOD))
 			pls |= USB_PORT_STAT_CONNECTION;
 	}
 
@@ -668,7 +670,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 	}
 	/* Update Port Link State */
 	if (hcd->speed == HCD_USB3) {
-		xhci_hub_report_usb3_link_state(&status, raw_port_status);
+		xhci_hub_report_usb3_link_state(xhci, &status, raw_port_status);
 		/*
 		 * Verify if all USB3 Ports Have entered U0 already.
 		 * Delete Compliance Mode Timer if so.
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 4133a00461b1..9bce4f0e99be 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1723,7 +1723,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	}
 
 	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
-	for (i = 0; i < num_ports; i++) {
+	for (i = 0; i < num_ports && xhci->rh_bw; i++) {
 		struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
 		for (j = 0; j < XHCI_MAX_INTERVAL; j++) {
 			struct list_head *ep = &bwt->interval_bw[j].endpoints;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index ab831048e8a4..82b563fc4fd6 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3928,13 +3928,21 @@ static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
 	int ret;
 
 	spin_lock_irqsave(&xhci->lock, flags);
-	if (max_exit_latency == xhci->devs[udev->slot_id]->current_mel) {
+
+	virt_dev = xhci->devs[udev->slot_id];
+
+	/*
+	 * virt_dev might not exists yet if xHC resumed from hibernate (S4) and
+	 * xHC was re-initialized. Exit latency will be set later after
+	 * hub_port_finish_reset() is done and xhci->devs[] are re-allocated
+	 */
+
+	if (!virt_dev || max_exit_latency == virt_dev->current_mel) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
 		return 0;
 	}
 
 	/* Attempt to issue an Evaluate Context command to change the MEL. */
-	virt_dev = xhci->devs[udev->slot_id];
 	command = xhci->lpm_command;
 	ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
 	if (!ctrl_ctx) {