aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/sound/alsa/soc/dapm.txt12
-rw-r--r--MAINTAINERS8
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/common/it8152.c14
-rw-r--r--arch/arm/common/locomo.c26
-rw-r--r--arch/arm/common/sharpsl_param.c2
-rw-r--r--arch/arm/configs/cm_x300_defconfig1466
-rw-r--r--arch/arm/configs/palmz72_defconfig951
-rw-r--r--arch/arm/configs/viper_defconfig1678
-rw-r--r--arch/arm/configs/xm_x2xx_defconfig (renamed from arch/arm/configs/xm_x270_defconfig)237
-rw-r--r--arch/arm/include/asm/mach/udc_pxa2xx.h3
-rw-r--r--arch/arm/kernel/ecard.c6
-rw-r--r--arch/arm/kernel/irq.c11
-rw-r--r--arch/arm/mach-at91/gpio.c3
-rw-r--r--arch/arm/mach-davinci/gpio.c5
-rw-r--r--arch/arm/mach-ep93xx/core.c7
-rw-r--r--arch/arm/mach-footbridge/isa-irq.c3
-rw-r--r--arch/arm/mach-h720x/common.c4
-rw-r--r--arch/arm/mach-h720x/cpu-h7202.c4
-rw-r--r--arch/arm/mach-imx/irq.c4
-rw-r--r--arch/arm/mach-integrator/integrator_cp.c3
-rw-r--r--arch/arm/mach-iop13xx/msi.c3
-rw-r--r--arch/arm/mach-ixp2000/core.c6
-rw-r--r--arch/arm/mach-ixp2000/ixdp2x00.c4
-rw-r--r--arch/arm/mach-ixp2000/ixdp2x01.c4
-rw-r--r--arch/arm/mach-ixp23xx/core.c4
-rw-r--r--arch/arm/mach-ixp23xx/ixdp2351.c8
-rw-r--r--arch/arm/mach-lh7a40x/arch-kev7a400.c2
-rw-r--r--arch/arm/mach-lh7a40x/arch-lpd7a40x.c4
-rw-r--r--arch/arm/mach-lh7a40x/common.h1
-rw-r--r--arch/arm/mach-lh7a40x/irq-lpd7a40x.c4
-rw-r--r--arch/arm/mach-netx/generic.c5
-rw-r--r--arch/arm/mach-ns9xxx/board-a9m9750dev.c5
-rw-r--r--arch/arm/mach-omap1/board-voiceblue.c1
-rw-r--r--arch/arm/mach-omap1/fpga.c4
-rw-r--r--arch/arm/mach-orion5x/irq.c2
-rw-r--r--arch/arm/mach-pxa/Kconfig93
-rw-r--r--arch/arm/mach-pxa/Makefile37
-rw-r--r--arch/arm/mach-pxa/akita-ioexp.c222
-rw-r--r--arch/arm/mach-pxa/am200epd.c374
-rw-r--r--arch/arm/mach-pxa/cm-x255.c258
-rw-r--r--arch/arm/mach-pxa/cm-x270-pci.h13
-rw-r--r--arch/arm/mach-pxa/cm-x270.c472
-rw-r--r--arch/arm/mach-pxa/cm-x2xx-pci.c (renamed from arch/arm/mach-pxa/cm-x270-pci.c)56
-rw-r--r--arch/arm/mach-pxa/cm-x2xx-pci.h13
-rw-r--r--arch/arm/mach-pxa/cm-x2xx.c531
-rw-r--r--arch/arm/mach-pxa/cm-x300.c465
-rw-r--r--arch/arm/mach-pxa/colibri.c11
-rw-r--r--arch/arm/mach-pxa/corgi.c476
-rw-r--r--arch/arm/mach-pxa/corgi_lcd.c290
-rw-r--r--arch/arm/mach-pxa/corgi_pm.c1
-rw-r--r--arch/arm/mach-pxa/corgi_ssp.c276
-rw-r--r--arch/arm/mach-pxa/cpufreq-pxa2xx.c (renamed from arch/arm/mach-pxa/cpu-pxa.c)2
-rw-r--r--arch/arm/mach-pxa/cpufreq-pxa3xx.c258
-rw-r--r--arch/arm/mach-pxa/devices.h1
-rw-r--r--arch/arm/mach-pxa/e330.c43
-rw-r--r--arch/arm/mach-pxa/e350.c43
-rw-r--r--arch/arm/mach-pxa/e400.c94
-rw-r--r--arch/arm/mach-pxa/e400_lcd.c56
-rw-r--r--arch/arm/mach-pxa/e740.c169
-rw-r--r--arch/arm/mach-pxa/e740_lcd.c123
-rw-r--r--arch/arm/mach-pxa/e750.c (renamed from arch/arm/mach-pxa/e750_lcd.c)67
-rw-r--r--arch/arm/mach-pxa/e800.c (renamed from arch/arm/mach-pxa/e800_lcd.c)79
-rw-r--r--arch/arm/mach-pxa/em-x270.c5
-rw-r--r--arch/arm/mach-pxa/eseries.c157
-rw-r--r--arch/arm/mach-pxa/eseries.h4
-rw-r--r--arch/arm/mach-pxa/eseries_udc.c57
-rw-r--r--arch/arm/mach-pxa/generic.c9
-rw-r--r--arch/arm/mach-pxa/generic.h1
-rw-r--r--arch/arm/mach-pxa/gpio.c2
-rw-r--r--arch/arm/mach-pxa/gumstix.c100
-rw-r--r--arch/arm/mach-pxa/idp.c78
-rw-r--r--arch/arm/mach-pxa/include/mach/akita.h32
-rw-r--r--arch/arm/mach-pxa/include/mach/corgi.h11
-rw-r--r--arch/arm/mach-pxa/include/mach/entry-macro.S4
-rw-r--r--arch/arm/mach-pxa/include/mach/hardware.h79
-rw-r--r--arch/arm/mach-pxa/include/mach/i2c.h9
-rw-r--r--arch/arm/mach-pxa/include/mach/irqs.h19
-rw-r--r--arch/arm/mach-pxa/include/mach/littleton.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/memory.h4
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa25x.h4
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp-pxa320.h8
-rw-r--r--arch/arm/mach-pxa/include/mach/mfp.h5
-rw-r--r--arch/arm/mach-pxa/include/mach/mioa701.h67
-rw-r--r--arch/arm/mach-pxa/include/mach/ohci.h16
-rw-r--r--arch/arm/mach-pxa/include/mach/palmz72.h80
-rw-r--r--arch/arm/mach-pxa/include/mach/pm.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/poodle.h9
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa-regs.h320
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa3xx-regs.h22
-rw-r--r--arch/arm/mach-pxa/include/mach/spitz.h42
-rw-r--r--arch/arm/mach-pxa/include/mach/ssp.h24
-rw-r--r--arch/arm/mach-pxa/include/mach/trizeps4.h84
-rw-r--r--arch/arm/mach-pxa/include/mach/viper.h96
-rw-r--r--arch/arm/mach-pxa/irq.c2
-rw-r--r--arch/arm/mach-pxa/leds-trizeps4.c134
-rw-r--r--arch/arm/mach-pxa/leds.c2
-rw-r--r--arch/arm/mach-pxa/littleton.c205
-rw-r--r--arch/arm/mach-pxa/lpd270.c99
-rw-r--r--arch/arm/mach-pxa/lubbock.c26
-rw-r--r--arch/arm/mach-pxa/magician.c16
-rw-r--r--arch/arm/mach-pxa/mainstone.c15
-rw-r--r--arch/arm/mach-pxa/mfp-pxa2xx.c225
-rw-r--r--arch/arm/mach-pxa/mioa701.c905
-rw-r--r--arch/arm/mach-pxa/mioa701_bootresume.S36
-rw-r--r--arch/arm/mach-pxa/mp900.c100
-rw-r--r--arch/arm/mach-pxa/palmtx.c20
-rw-r--r--arch/arm/mach-pxa/palmz72.c554
-rw-r--r--arch/arm/mach-pxa/pcm027.c32
-rw-r--r--arch/arm/mach-pxa/pcm990-baseboard.c33
-rw-r--r--arch/arm/mach-pxa/pm.c18
-rw-r--r--arch/arm/mach-pxa/poodle.c353
-rw-r--r--arch/arm/mach-pxa/pxa25x.c66
-rw-r--r--arch/arm/mach-pxa/pxa27x.c66
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c45
-rw-r--r--arch/arm/mach-pxa/sharpsl_pm.c16
-rw-r--r--arch/arm/mach-pxa/spitz.c533
-rw-r--r--arch/arm/mach-pxa/spitz_pm.c28
-rw-r--r--arch/arm/mach-pxa/time.c2
-rw-r--r--arch/arm/mach-pxa/trizeps4.c551
-rw-r--r--arch/arm/mach-pxa/viper.c951
-rw-r--r--arch/arm/mach-pxa/zylonite.c17
-rw-r--r--arch/arm/mach-pxa/zylonite_pxa300.c12
-rw-r--r--arch/arm/mach-pxa/zylonite_pxa320.c10
-rw-r--r--arch/arm/mach-s3c2410/bast-irq.c3
-rw-r--r--arch/arm/mach-s3c2412/irq.c4
-rw-r--r--arch/arm/mach-s3c2440/irq.c7
-rw-r--r--arch/arm/mach-s3c2443/irq.c5
-rw-r--r--arch/arm/mach-sa1100/irq.c4
-rw-r--r--arch/arm/mach-sa1100/neponset.c11
-rw-r--r--arch/arm/mach-versatile/core.c3
-rw-r--r--arch/arm/plat-omap/gpio.c5
-rw-r--r--arch/arm/plat-s3c24xx/irq.c24
-rw-r--r--arch/arm/plat-s3c24xx/s3c244x-irq.c7
-rw-r--r--drivers/hwmon/Kconfig9
-rw-r--r--drivers/hwmon/Makefile1
-rw-r--r--drivers/hwmon/max1111.c244
-rw-r--r--drivers/i2c/busses/i2c-pxa.c94
-rw-r--r--drivers/input/keyboard/corgikbd.c6
-rw-r--r--drivers/input/keyboard/spitzkbd.c6
-rw-r--r--drivers/input/keyboard/tosakbd.c6
-rw-r--r--drivers/input/touchscreen/Kconfig1
-rw-r--r--drivers/input/touchscreen/ads7846.c68
-rw-r--r--drivers/input/touchscreen/ucb1400_ts.c382
-rw-r--r--drivers/leds/Kconfig14
-rw-r--r--drivers/leds/Makefile2
-rw-r--r--drivers/leds/leds-corgi.c124
-rw-r--r--drivers/leds/leds-spitz.c131
-rw-r--r--drivers/media/video/pxa_camera.c12
-rw-r--r--drivers/mfd/Kconfig9
-rw-r--r--drivers/mfd/Makefile1
-rw-r--r--drivers/mfd/ucb1400_core.c106
-rw-r--r--drivers/mmc/host/pxamci.c4
-rw-r--r--drivers/mtd/nand/cmx270_nand.c2
-rw-r--r--drivers/net/irda/pxaficp_ir.c8
-rw-r--r--drivers/net/smc91x.h11
-rw-r--r--drivers/pcmcia/Kconfig3
-rw-r--r--drivers/pcmcia/Makefile16
-rw-r--r--drivers/pcmcia/pxa2xx_base.c44
-rw-r--r--drivers/pcmcia/pxa2xx_cm_x255.c154
-rw-r--r--drivers/pcmcia/pxa2xx_cm_x270.c14
-rw-r--r--drivers/pcmcia/pxa2xx_cm_x2xx.c49
-rw-r--r--drivers/pcmcia/pxa2xx_palmld.c151
-rw-r--r--drivers/pcmcia/pxa2xx_trizeps4.c256
-rw-r--r--drivers/pcmcia/pxa2xx_viper.c179
-rw-r--r--drivers/power/Kconfig8
-rw-r--r--drivers/power/Makefile2
-rw-r--r--drivers/power/palmtx_battery.c198
-rw-r--r--drivers/power/wm97xx_battery.c272
-rw-r--r--drivers/serial/pxa.c5
-rw-r--r--drivers/usb/host/ohci-pxa27x.c259
-rw-r--r--drivers/video/Kconfig31
-rw-r--r--drivers/video/Makefile1
-rw-r--r--drivers/video/am200epd.c295
-rw-r--r--drivers/video/backlight/Kconfig15
-rw-r--r--drivers/video/backlight/Makefile2
-rw-r--r--drivers/video/backlight/corgi_lcd.c641
-rw-r--r--drivers/video/backlight/lcd.c18
-rw-r--r--drivers/video/backlight/tdo24m.c396
-rw-r--r--drivers/video/fbmem.c1
-rw-r--r--drivers/video/metronomefb.c288
-rw-r--r--include/linux/lcd.h3
-rw-r--r--include/linux/smc91x.h9
-rw-r--r--include/linux/spi/ads7846.h3
-rw-r--r--include/linux/spi/corgi_lcd.h20
-rw-r--r--include/linux/ucb1400.h161
-rw-r--r--include/linux/wm97xx_batt.h26
-rw-r--r--include/video/metronomefb.h31
-rw-r--r--sound/arm/pxa2xx-ac97.c4
-rw-r--r--sound/soc/pxa/corgi.c34
-rw-r--r--sound/soc/pxa/pxa2xx-ac97.c18
-rw-r--r--sound/soc/pxa/pxa2xx-i2s.c44
-rw-r--r--sound/soc/pxa/spitz.c46
193 files changed, 15153 insertions, 5311 deletions
diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt
index b2ed6983f40d..46f9684d0b29 100644
--- a/Documentation/sound/alsa/soc/dapm.txt
+++ b/Documentation/sound/alsa/soc/dapm.txt
@@ -135,11 +135,7 @@ when the Mic is inserted:-
static int spitz_mic_bias(struct snd_soc_dapm_widget* w, int event)
{
- if(SND_SOC_DAPM_EVENT_ON(event))
- set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_MIC_BIAS);
- else
- reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_MIC_BIAS);
-
+ gpio_set_value(SPITZ_GPIO_MIC_BIAS, SND_SOC_DAPM_EVENT_ON(event));
return 0;
}
@@ -269,11 +265,7 @@ powered only when the spk is in use.
/* turn speaker amplifier on/off depending on use */
static int corgi_amp_event(struct snd_soc_dapm_widget *w, int event)
{
- if (SND_SOC_DAPM_EVENT_ON(event))
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON);
- else
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON);
-
+ gpio_set_value(CORGI_GPIO_APM_ON, SND_SOC_DAPM_EVENT_ON(event));
return 0;
}
diff --git a/MAINTAINERS b/MAINTAINERS
index 0cc08809e536..4f7b64a824ae 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -497,7 +497,7 @@ M: kernel@wantstofly.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
-ARM/COMPULAB CM-X270/EM-X270 MACHINE SUPPORT
+ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT
P: Mike Rapoport
M: mike@compulab.co.il
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
@@ -629,6 +629,12 @@ M: marek.vasut@gmail.com
W: http://hackndev.com
S: Maintained
+ARM/PALMZ72 SUPPORT
+P: Sergey Lapin
+M: slapin@ossfans.org
+W: http://hackndev.com
+S: Maintained
+
ARM/PLEB SUPPORT
P: Peter Chubb
M: pleb@gelato.unsw.edu.au
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 744d07e69602..960d5a54aec3 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -876,7 +876,7 @@ config LEDS
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
- ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \
+ ARCH_AT91 || ARCH_DAVINCI || \
ARCH_KS8695 || MACH_RD88F5182
help
If you say Y here, the LEDs on your machine will be used
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 5fe9588db077..2793447621c3 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -66,14 +66,6 @@ static void it8152_unmask_irq(unsigned int irq)
}
}
-static inline void it8152_irq(int irq)
-{
- struct irq_desc *desc;
-
- desc = irq_desc + irq;
- desc_handle_irq(irq, desc);
-}
-
static struct irq_chip it8152_irq_chip = {
.name = "it8152",
.ack = it8152_mask_irq,
@@ -128,21 +120,21 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
bits_pd &= ((1 << IT8152_PD_IRQ_COUNT) - 1);
while (bits_pd) {
i = __ffs(bits_pd);
- it8152_irq(IT8152_PD_IRQ(i));
+ generic_handle_irq(IT8152_PD_IRQ(i));
bits_pd &= ~(1 << i);
}
bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1);
while (bits_lp) {
i = __ffs(bits_lp);
- it8152_irq(IT8152_LP_IRQ(i));
+ generic_handle_irq(IT8152_LP_IRQ(i));
bits_lp &= ~(1 << i);
}
bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1);
while (bits_ld) {
i = __ffs(bits_ld);
- it8152_irq(IT8152_LD_IRQ(i));
+ generic_handle_irq(IT8152_LD_IRQ(i));
bits_ld &= ~(1 << i);
}
}
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 534b23d95864..7c6b4b99a2df 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -169,7 +169,6 @@ static struct locomo_dev_info locomo_devices[] = {
static void locomo_handler(unsigned int irq, struct irq_desc *desc)
{
int req, i;
- struct irq_desc *d;
void __iomem *mapbase = get_irq_chip_data(irq);
/* Acknowledge the parent IRQ */
@@ -181,10 +180,9 @@ static void locomo_handler(unsigned int irq, struct irq_desc *desc)
if (req) {
/* generate the next interrupt(s) */
irq = LOCOMO_IRQ_START;
- d = irq_desc + irq;
- for (i = 0; i <= 3; i++, d++, irq++) {
+ for (i = 0; i <= 3; i++, irq++) {
if (req & (0x0100 << i)) {
- desc_handle_irq(irq, d);
+ generic_handle_irq(irq);
}
}
@@ -222,12 +220,10 @@ static struct irq_chip locomo_chip = {
static void locomo_key_handler(unsigned int irq, struct irq_desc *desc)
{
- struct irq_desc *d;
void __iomem *mapbase = get_irq_chip_data(irq);
if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) {
- d = irq_desc + LOCOMO_IRQ_KEY_START;
- desc_handle_irq(LOCOMO_IRQ_KEY_START, d);
+ generic_handle_irq(LOCOMO_IRQ_KEY_START);
}
}
@@ -268,7 +264,6 @@ static struct irq_chip locomo_key_chip = {
static void locomo_gpio_handler(unsigned int irq, struct irq_desc *desc)
{
int req, i;
- struct irq_desc *d;
void __iomem *mapbase = get_irq_chip_data(irq);
req = locomo_readl(mapbase + LOCOMO_GIR) &
@@ -277,10 +272,9 @@ static void locomo_gpio_handler(unsigned int irq, struct irq_desc *desc)
if (req) {
irq = LOCOMO_IRQ_GPIO_START;
- d = irq_desc + LOCOMO_IRQ_GPIO_START;
- for (i = 0; i <= 15; i++, irq++, d++) {
+ for (i = 0; i <= 15; i++, irq++) {
if (req & (0x0001 << i)) {
- desc_handle_irq(irq, d);
+ generic_handle_irq(irq);
}
}
}
@@ -361,12 +355,10 @@ static struct irq_chip locomo_gpio_chip = {
static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
{
- struct irq_desc *d;
void __iomem *mapbase = get_irq_chip_data(irq);
if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) {
- d = irq_desc + LOCOMO_IRQ_LT_START;
- desc_handle_irq(LOCOMO_IRQ_LT_START, d);
+ generic_handle_irq(LOCOMO_IRQ_LT_START);
}
}
@@ -407,17 +399,15 @@ static struct irq_chip locomo_lt_chip = {
static void locomo_spi_handler(unsigned int irq, struct irq_desc *desc)
{
int req, i;
- struct irq_desc *d;
void __iomem *mapbase = get_irq_chip_data(irq);
req = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIR) & 0x000F;
if (req) {
irq = LOCOMO_IRQ_SPI_START;
- d = irq_desc + irq;
- for (i = 0; i <= 3; i++, irq++, d++) {
+ for (i = 0; i <= 3; i++, irq++) {
if (req & (0x0001 << i)) {
- desc_handle_irq(irq, d);
+ generic_handle_irq(irq);
}
}
}
diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c
index aad4d94ba8f5..d56c932580eb 100644
--- a/arch/arm/common/sharpsl_param.c
+++ b/arch/arm/common/sharpsl_param.c
@@ -12,6 +12,7 @@
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/string.h>
#include <asm/mach/sharpsl_param.h>
@@ -36,6 +37,7 @@
#define PHAD_MAGIC MAGIC_CHG('P','H','A','D')
struct sharpsl_param_info sharpsl_param;
+EXPORT_SYMBOL(sharpsl_param);
void sharpsl_save_param(void)
{
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
new file mode 100644
index 000000000000..46f1c9dc350c
--- /dev/null
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -0,0 +1,1466 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc3
+# Tue Aug 19 11:26:54 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-cm-x300"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+# CONFIG_CPU_PXA310 is not set
+# CONFIG_CPU_PXA320 is not set
+# CONFIG_CPU_PXA930 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_MACH_CM_X300=y
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA3xx=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_IWMMXT=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=jffs2 console=ttyS2,38400"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+CONFIG_MTD_NAND_PXA3xx=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=0
+CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=m
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+# CONFIG_SND_PXA2XX_AC97 is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_PXA2XX_SOC=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=m
+# CONFIG_MMC_SDHCI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig
new file mode 100644
index 000000000000..3245f8f33e0a
--- /dev/null
+++ b/arch/arm/configs/palmz72_defconfig
@@ -0,0 +1,951 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc4
+# Sun Aug 24 02:29:27 2008
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+CONFIG_ARCH_PXA_PALM=y
+# CONFIG_MACH_PALMTX is not set
+CONFIG_MACH_PALMZ72=y
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_PWM=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_PXA is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_PXA2XX is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=y
+# CONFIG_APM_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_PWM=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=866
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+CONFIG_NLS_CODEPAGE_866=y
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
new file mode 100644
index 000000000000..d01fecb8673e
--- /dev/null
+++ b/arch/arm/configs/viper_defconfig
@@ -0,0 +1,1678 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 17:12:07 2008
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=13
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+CONFIG_ARCH_VIPER=y
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA25x=y
+CONFIG_PXA_PWM=m
+CONFIG_PXA_HAVE_ISA_IRQS=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+CONFIG_ISA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PXA2XX=m
+CONFIG_PCMCIA_PROBE=y
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_FREQ_PXA=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+CONFIG_FPE_FASTFPE=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+# CONFIG_BT_SCO is not set
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+# CONFIG_BT_HIDP is not set
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+# CONFIG_BT_HCIUSB_SCO is not set
+# CONFIG_BT_HCIBTUSB is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+CONFIG_MTD_SPARSE_RAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+# CONFIG_PATA_LEGACY is not set
+CONFIG_PATA_PCMCIA=m
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_FUJITSU=m
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=5
+CONFIG_SERIAL_8250_RUNTIME_UARTS=5
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SA1100_WATCHDOG is not set
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=m
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_PWM=m
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=m
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_AC97=m
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_PCMCIA=y
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_ISP116X_HCD=m
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_CS is not set
+CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA25X=y
+CONFIG_USB_PXA25X=m
+# CONFIG_USB_PXA25X_SMALL is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/xm_x270_defconfig b/arch/arm/configs/xm_x2xx_defconfig
index aa40d91ce599..f891364deceb 100644
--- a/arch/arm/configs/xm_x270_defconfig
+++ b/arch/arm/configs/xm_x2xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Sun May 11 15:12:52 2008
+# Linux kernel version: 2.6.27-rc8
+# Sun Oct 5 11:05:36 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@ CONFIG_MMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
@@ -24,6 +25,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -62,7 +64,6 @@ CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -88,14 +89,21 @@ CONFIG_SLUB=y
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -106,6 +114,7 @@ CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -131,7 +140,6 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
@@ -145,8 +153,11 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
@@ -164,26 +175,32 @@ CONFIG_DMABOUNCE=y
#
# Intel PXA2xx/PXA3xx Implementations
#
-
-#
-# Select target boards
-#
# CONFIG_ARCH_GUMSTIX is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_TRIZEPS_PXA is not set
CONFIG_MACH_EM_X270=y
# CONFIG_MACH_COLIBRI is not set
# CONFIG_MACH_ZYLONITE is not set
# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
CONFIG_MACH_ARMCORE=y
+# CONFIG_MACH_CM_X300 is not set
# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA25x=y
CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
# CONFIG_PXA_PWM is not set
#
@@ -253,11 +270,17 @@ CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -284,9 +307,10 @@ CONFIG_CMDLINE="root=1f03 mem=32M"
# CONFIG_KEXEC is not set
#
-# CPU Frequency scaling
+# CPU Power Management
#
# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
@@ -316,10 +340,6 @@ CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=m
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -402,6 +422,7 @@ CONFIG_BT_HIDP=m
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
@@ -419,6 +440,7 @@ CONFIG_BT_HCIUSB_SCO=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
@@ -435,6 +457,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -527,6 +551,7 @@ CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_GPIO=m
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_SHARPSL is not set
@@ -636,6 +661,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_PMP is not set
@@ -696,17 +722,21 @@ CONFIG_PATA_PCMCIA=m
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -725,6 +755,7 @@ CONFIG_MII=y
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
CONFIG_DM9000_DEBUGLEVEL=1
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
@@ -780,7 +811,6 @@ CONFIG_LIBERTAS_SDIO=m
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_HOSTAP is not set
@@ -853,17 +883,18 @@ CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_WM97XX=m
# CONFIG_TOUCHSCREEN_WM9705 is not set
CONFIG_TOUCHSCREEN_WM9712=y
# CONFIG_TOUCHSCREEN_WM9713 is not set
# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_INPUT_MISC is not set
#
@@ -880,6 +911,7 @@ CONFIG_SERIO_LIBPS2=y
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -922,45 +954,66 @@ CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
@@ -970,25 +1023,31 @@ CONFIG_I2C_PXA=y
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
# SPI GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
@@ -1000,10 +1059,16 @@ CONFIG_SSB_POSSIBLE=y
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
#
# Multimedia devices
@@ -1014,6 +1079,7 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
@@ -1038,7 +1104,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -1071,12 +1136,14 @@ CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
CONFIG_FB_PXA=y
# CONFIG_FB_PXA_SMARTPANEL is not set
CONFIG_FB_PXA_PARAMETERS=y
CONFIG_FB_MBX=m
-# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_W100 is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -1099,15 +1166,7 @@ CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
@@ -1121,19 +1180,15 @@ CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
@@ -1193,42 +1248,16 @@ CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA ARM devices
-#
+CONFIG_SND_ARM=y
CONFIG_SND_PXA2XX_PCM=m
CONFIG_SND_PXA2XX_AC97=m
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
@@ -1261,12 +1290,15 @@ CONFIG_USB_DEVICEFS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1274,12 +1306,14 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1309,7 +1343,6 @@ CONFIG_USB_STORAGE=y
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
@@ -1322,7 +1355,6 @@ CONFIG_USB_MON=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1338,6 +1370,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
@@ -1349,6 +1382,7 @@ CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
@@ -1356,14 +1390,19 @@ CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_MMC_PXA=m
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_SDRICOH_CS is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
+# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_CM_X270=y
+# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
@@ -1401,6 +1440,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
@@ -1422,6 +1462,15 @@ CONFIG_RTC_DRV_V3020=y
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SA1100=y
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
#
@@ -1501,6 +1550,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -1511,13 +1561,12 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1626,6 +1675,7 @@ CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
@@ -1633,7 +1683,17 @@ CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1689,6 +1749,10 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -1729,6 +1793,7 @@ CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h
index 270902c353fd..f3eabf1ecec3 100644
--- a/arch/arm/include/asm/mach/udc_pxa2xx.h
+++ b/arch/arm/include/asm/mach/udc_pxa2xx.h
@@ -18,8 +18,7 @@ struct pxa2xx_udc_mach_info {
/* Boards following the design guidelines in the developer's manual,
* with on-chip GPIOs not Lubbock's weird hardware, can have a sane
* VBUS IRQ and omit the methods above. Store the GPIO number
- * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits.
- * Note that sometimes the signals go through inverters...
+ * here. Note that sometimes the signals go through inverters...
*/
bool gpio_vbus_inverted;
u16 gpio_vbus; /* high == vbus present */
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 7a50575a8d4d..60c079d85355 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -587,8 +587,7 @@ ecard_irq_handler(unsigned int irq, struct irq_desc *desc)
pending = ecard_default_ops.irqpending(ec);
if (pending) {
- struct irq_desc *d = irq_desc + ec->irq;
- desc_handle_irq(ec->irq, d);
+ generic_handle_irq(ec->irq);
called ++;
}
}
@@ -622,7 +621,6 @@ ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc)
ecard_t *ec = slot_to_ecard(slot);
if (ec->claimed) {
- struct irq_desc *d = irq_desc + ec->irq;
/*
* this ugly code is so that we can operate a
* prioritorising system:
@@ -635,7 +633,7 @@ ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc)
* Serial cards should go in 0/1, ethernet/scsi in 2/3
* otherwise you will lose serial data at high speeds!
*/
- desc_handle_irq(ec->irq, d);
+ generic_handle_irq(ec->irq);
} else {
printk(KERN_WARNING "card%d: interrupt from unclaimed "
"card???\n", slot);
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index f88efb135b70..2f3eb795fa6e 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -112,18 +112,17 @@ static struct irq_desc bad_irq_desc = {
asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
- struct irq_desc *desc = irq_desc + irq;
+
+ irq_enter();
/*
* Some hardware gives randomly wrong interrupts. Rather
* than crashing, do something sensible.
*/
if (irq >= NR_IRQS)
- desc = &bad_irq_desc;
-
- irq_enter();
-
- desc_handle_irq(irq, desc);
+ handle_bad_irq(irq, &bad_irq_desc);
+ else
+ generic_handle_irq(irq);
/* AT91 specific workaround */
irq_finish(irq);
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 93e0614f2afb..7e5ebb5bdd17 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -404,7 +404,6 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
}
pin = bank->chipbase;
- gpio = &irq_desc[pin];
while (isr) {
if (isr & 1) {
@@ -417,7 +416,7 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
gpio_irq_mask(pin);
}
else
- desc_handle_irq(pin, gpio);
+ generic_handle_irq(pin);
}
pin++;
gpio++;
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index c9cb4f09b18f..574cb810a500 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -201,7 +201,6 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
desc->chip->ack(irq);
while (1) {
u32 status;
- struct irq_desc *gpio;
int n;
int res;
@@ -215,12 +214,10 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
/* now demux them to the right lowlevel handler */
n = (int)get_irq_data(irq);
- gpio = &irq_desc[n];
while (status) {
res = ffs(status);
n += res;
- gpio += res;
- desc_handle_irq(n - 1, gpio - 1);
+ generic_handle_irq(n - 1);
status >>= res;
}
}
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 7e65d23e14b5..de53f0be71b9 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -192,8 +192,7 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
- desc = irq_desc + gpio_irq;
- desc_handle_irq(gpio_irq, desc);
+ generic_handle_irq(gpio_irq);
}
}
@@ -202,7 +201,7 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
if (status & (1 << i)) {
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
desc = irq_desc + gpio_irq;
- desc_handle_irq(gpio_irq, desc);
+ generic_handle_irq(gpio_irq);
}
}
}
@@ -217,7 +216,7 @@ static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
- desc_handle_irq(gpio_irq, irq_desc + gpio_irq);
+ generic_handle_irq(gpio_irq);
}
static void ep93xx_gpio_irq_ack(unsigned int irq)
diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c
index 62bb38f1369d..54fec9ae28b9 100644
--- a/arch/arm/mach-footbridge/isa-irq.c
+++ b/arch/arm/mach-footbridge/isa-irq.c
@@ -94,8 +94,7 @@ isa_irq_handler(unsigned int irq, struct irq_desc *desc)
return;
}
- desc = irq_desc + isa_irq;
- desc_handle_irq(isa_irq, desc);
+ generic_handle_irq(isa_irq);
}
static struct irqaction irq_cascade = {
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 3a410e3f1e5f..7a2614828217 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -104,14 +104,12 @@ h720x_gpio_handler(unsigned int mask, unsigned int irq,
struct irq_desc *desc)
{
IRQDBG("%s irq: %d\n", __func__, irq);
- desc = irq_desc + irq;
while (mask) {
if (mask & 1) {
IRQDBG("handling irq %d\n", irq);
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
}
irq++;
- desc++;
mask >>= 1;
}
}
diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c
index 53e1f62f2e79..fd33a19c813a 100644
--- a/arch/arm/mach-h720x/cpu-h7202.c
+++ b/arch/arm/mach-h720x/cpu-h7202.c
@@ -120,12 +120,10 @@ h7202_timerx_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
mask >>= 1;
irq = IRQ_TIMER1;
- desc = irq_desc + irq;
while (mask) {
if (mask & 1)
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
irq++;
- desc++;
mask >>= 1;
}
}
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
index 2ce75625b417..232e3b9f880d 100644
--- a/arch/arm/mach-imx/irq.c
+++ b/arch/arm/mach-imx/irq.c
@@ -182,14 +182,12 @@ static void
imx_gpio_handler(unsigned int mask, unsigned int irq,
struct irq_desc *desc)
{
- desc = irq_desc + irq;
while (mask) {
if (mask & 1) {
DEBUG_IRQ("handling irq %d\n", irq);
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
}
irq++;
- desc++;
mask >>= 1;
}
}
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index c0eaf0a6f453..88026ccd5ac9 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -217,8 +217,7 @@ sic_handle_irq(unsigned int irq, struct irq_desc *desc)
irq += IRQ_SIC_START;
- desc = irq_desc + irq;
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
} while (status);
}
diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c
index 63ef1124ca5c..f34b0ed80630 100644
--- a/arch/arm/mach-iop13xx/msi.c
+++ b/arch/arm/mach-iop13xx/msi.c
@@ -110,8 +110,7 @@ static void iop13xx_msi_handler(unsigned int irq, struct irq_desc *desc)
do {
j = find_first_bit(&status, 32);
(write_imipr[i])(1 << j); /* write back to clear bit */
- desc = irq_desc + IRQ_IOP13XX_MSI_0 + j + (32*i);
- desc_handle_irq(IRQ_IOP13XX_MSI_0 + j + (32*i), desc);
+ generic_handle_irq(IRQ_IOP13XX_MSI_0 + j + (32*i));
status = (read_imipr[i])();
} while (status);
}
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 628063ca31e6..babb22597163 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -304,8 +304,7 @@ static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irq_desc *desc)
for (i = 0; i <= 7; i++) {
if (status & (1<<i)) {
- desc = irq_desc + i + IRQ_IXP2000_GPIO0;
- desc_handle_irq(i + IRQ_IXP2000_GPIO0, desc);
+ generic_handle_irq(i + IRQ_IXP2000_GPIO0);
}
}
}
@@ -397,8 +396,7 @@ static void ixp2000_err_irq_handler(unsigned int irq, struct irq_desc *desc)
for(i = 31; i >= 0; i--) {
if(status & (1 << i)) {
- desc = irq_desc + IRQ_IXP2000_DRAM0_MIN_ERR + i;
- desc_handle_irq(IRQ_IXP2000_DRAM0_MIN_ERR + i, desc);
+ generic_handle_irq(IRQ_IXP2000_DRAM0_MIN_ERR + i);
}
}
}
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 4debb9ff056c..b0653a87159a 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -129,10 +129,8 @@ static void ixdp2x00_irq_handler(unsigned int irq, struct irq_desc *desc)
for(i = 0; i < board_irq_count; i++) {
if(ex_interrupt & (1 << i)) {
- struct irq_desc *cpld_desc;
int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
- cpld_desc = irq_desc + cpld_irq;
- desc_handle_irq(cpld_irq, cpld_desc);
+ generic_handle_irq(cpld_irq);
}
}
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index c7042725dc80..4a12327a09a3 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -79,10 +79,8 @@ static void ixdp2x01_irq_handler(unsigned int irq, struct irq_desc *desc)
for (i = 0; i < IXP2000_BOARD_IRQS; i++) {
if (ex_interrupt & (1 << i)) {
- struct irq_desc *cpld_desc;
int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
- cpld_desc = irq_desc + cpld_irq;
- desc_handle_irq(cpld_irq, cpld_desc);
+ generic_handle_irq(cpld_irq);
}
}
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index 68b4ac5b2481..aa4c4420ff3d 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -253,7 +253,6 @@ static void pci_handler(unsigned int irq, struct irq_desc *desc)
{
u32 pci_interrupt;
unsigned int irqno;
- struct irq_desc *int_desc;
pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS;
@@ -268,8 +267,7 @@ static void pci_handler(unsigned int irq, struct irq_desc *desc)
BUG();
}
- int_desc = irq_desc + irqno;
- desc_handle_irq(irqno, int_desc);
+ generic_handle_irq(irqno);
desc->chip->unmask(irq);
}
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index b6e0bfa44df9..f1b124a709ab 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -68,11 +68,9 @@ static void ixdp2351_inta_handler(unsigned int irq, struct irq_desc *desc)
for (i = 0; i < IXDP2351_INTA_IRQ_NUM; i++) {
if (ex_interrupt & (1 << i)) {
- struct irq_desc *cpld_desc;
int cpld_irq =
IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i);
- cpld_desc = irq_desc + cpld_irq;
- desc_handle_irq(cpld_irq, cpld_desc);
+ generic_handle_irq(cpld_irq);
}
}
@@ -105,11 +103,9 @@ static void ixdp2351_intb_handler(unsigned int irq, struct irq_desc *desc)
for (i = 0; i < IXDP2351_INTB_IRQ_NUM; i++) {
if (ex_interrupt & (1 << i)) {
- struct irq_desc *cpld_desc;
int cpld_irq =
IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i);
- cpld_desc = irq_desc + cpld_irq;
- desc_handle_irq(cpld_irq, cpld_desc);
+ generic_handle_irq(cpld_irq);
}
}
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index 551b97261826..3d7bd50b9095 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -77,7 +77,7 @@ static void kev7a400_cpld_handler (unsigned int irq, struct irq_desc *desc)
irq = IRQ_KEV7A400_CPLD;
for (; mask; mask >>= 1, ++irq)
if (mask & 1)
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
}
void __init lh7a40x_init_board_irq (void)
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index e373fb8e2699..cb15e5d32120 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -214,11 +214,11 @@ static void lpd7a40x_cpld_handler (unsigned int irq, struct irq_desc *desc)
desc->chip->ack (irq);
if ((mask & (1<<0)) == 0) /* WLAN */
- IRQ_DISPATCH (IRQ_LPD7A40X_ETH_INT);
+ generic_handle_irq(IRQ_LPD7A40X_ETH_INT);
#if defined (IRQ_TOUCH)
if ((mask & (1<<1)) == 0) /* Touch */
- IRQ_DISPATCH (IRQ_TOUCH);
+ generic_handle_irq(IRQ_TOUCH);
#endif
desc->chip->unmask (irq); /* Level-triggered need this */
diff --git a/arch/arm/mach-lh7a40x/common.h b/arch/arm/mach-lh7a40x/common.h
index 0ca20c6c83b7..6ed3f6b6db76 100644
--- a/arch/arm/mach-lh7a40x/common.h
+++ b/arch/arm/mach-lh7a40x/common.h
@@ -15,4 +15,3 @@ extern void lh7a404_init_irq (void);
extern void lh7a40x_clcd_init (void);
extern void lh7a40x_init_board_irq (void);
-#define IRQ_DISPATCH(irq) desc_handle_irq((irq),(irq_desc + irq))
diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
index 0d5063ebda10..fd033bb4342f 100644
--- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
@@ -63,10 +63,10 @@ static void lh7a40x_cpld_handler (unsigned int irq, struct irq_desc *desc)
desc->chip->ack (irq);
if ((mask & 0x1) == 0) /* WLAN */
- IRQ_DISPATCH (IRQ_LPD7A40X_ETH_INT);
+ generic_handle_irq(IRQ_LPD7A40X_ETH_INT);
if ((mask & 0x2) == 0) /* Touch */
- IRQ_DISPATCH (IRQ_LPD7A400_TS);
+ generic_handle_irq(IRQ_LPD7A400_TS);
desc->chip->unmask (irq); /* Level-triggered need this */
}
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index e60c4061dc40..79df60c20e70 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -77,15 +77,12 @@ netx_hif_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
stat = ((readl(NETX_DPMAS_INT_EN) &
readl(NETX_DPMAS_INT_STAT)) >> 24) & 0x1f;
- desc = irq_desc + NETX_IRQ_HIF_CHAINED(0);
-
while (stat) {
if (stat & 1) {
DEBUG_IRQ("handling irq %d\n", irq);
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
}
irq++;
- desc++;
stat >>= 1;
}
}
diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
index a22a608a7aba..b45bb3b802f1 100644
--- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c
+++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
@@ -86,13 +86,10 @@ static void a9m9750dev_fpga_demux_handler(unsigned int irq,
while (stat != 0) {
int irqno = fls(stat) - 1;
- struct irq_desc *fpgadesc;
stat &= ~(1 << irqno);
- fpgadesc = irq_desc + FPGA_IRQ(irqno);
-
- desc_handle_irq(FPGA_IRQ(irqno), fpgadesc);
+ generic_handle_irq(FPGA_IRQ(irqno));
}
desc->chip->unmask(irq);
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 213b48787102..45a01311669a 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -21,6 +21,7 @@
#include <linux/reboot.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
+#include <linux/irq.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 0d9f48f780ad..04995381aa5c 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -86,7 +86,6 @@ static void fpga_mask_ack_irq(unsigned int irq)
void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc)
{
- struct irq_desc *d;
u32 stat;
int fpga_irq;
@@ -99,8 +98,7 @@ void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc)
(fpga_irq < OMAP_FPGA_IRQ_END) && stat;
fpga_irq++, stat >>= 1) {
if (stat & 1) {
- d = irq_desc + fpga_irq;
- desc_handle_irq(fpga_irq, d);
+ generic_handle_irq(fpga_irq);
}
}
}
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 02ceeb3c6737..632a36f5cf14 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -162,7 +162,7 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
polarity ^= 1 << pin;
writel(polarity, GPIO_IN_POL);
}
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
}
}
}
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index e484f609feda..f27f6b3d6e6f 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -38,16 +38,23 @@ config ARCH_LUBBOCK
bool "Intel DBPXA250 Development Platform"
select PXA25x
select SA1111
+ select PXA_HAVE_BOARD_IRQS
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
select PXA27x
select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform"
select PXA27x
select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
+
+config MACH_MP900C
+ bool "Nec Mobilepro 900/c"
+ select PXA25x
config ARCH_PXA_IDP
bool "Accelent Xscale IDP"
@@ -114,10 +121,21 @@ config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support"
depends on PXA_SHARPSL
select PXA25x
+ select PXA_HAVE_BOARD_IRQS
+
+config ARCH_VIPER
+ bool "Arcom/Eurotech VIPER SBC"
+ select PXA25x
+ select ISA
+ select I2C_GPIO
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
+ select PXA_HAVE_ISA_IRQS
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select PXA25x
+ select PXA_HAVE_BOARD_IRQS
config MACH_E330
bool "Toshiba e330"
@@ -170,13 +188,41 @@ config MACH_E800
Say Y here if you intend to run this kernel on a Toshiba
e800 family PDA.
+config TRIZEPS_PXA
+ bool "PXA based Keith und Koep Trizeps DIMM-Modules"
+
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
+ depends on TRIZEPS_PXA
+ select TRIZEPS_PCMCIA
select PXA27x
-config MACH_TRIZEPS4_CONXS
+config MACH_TRIZEPS4WL
+ bool "Keith und Koep Trizeps4-WL DIMM-Module"
+ depends on TRIZEPS_PXA
+ select TRIZEPS_PCMCIA
+ select PXA27x
+ select PXA_SSP
+
+choice
+ prompt "Select base board for Trizeps module"
+ depends on TRIZEPS_PXA
+
+config MACH_TRIZEPS_CONXS
bool "ConXS Eval Board"
- depends on MACH_TRIZEPS4
+
+config MACH_TRIZEPS_UCONXS
+ bool "uConXS Eval Board"
+
+config MACH_TRIZEPS_ANY
+ bool "another Board"
+
+endchoice
+
+config TRIZEPS_PCMCIA
+ bool
+ help
+ Enable PCMCIA support for Trizeps modules
config MACH_EM_X270
bool "CompuLab EM-x270 platform"
@@ -189,6 +235,7 @@ config MACH_COLIBRI
config MACH_ZYLONITE
bool "PXA3xx Development Platform (aka Zylonite)"
select PXA3xx
+ select PXA_SSP
select HAVE_PWM
config MACH_LITTLETON
@@ -207,21 +254,42 @@ config MACH_SAAR
select PXA930
config MACH_ARMCORE
- bool "CompuLab CM-X270 modules"
+ bool "CompuLab CM-X255/CM-X270 modules"
select PXA27x
select IWMMXT
select ZONE_DMA if PCI
+ select PXA25x
+ select PXA_SSP
+
+config MACH_CM_X300
+ bool "CompuLab CM-X300 modules"
+ select PXA3xx
+ select CPU_PXA300
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
select PXA27x
select IWMMXT
+ select PXA_HAVE_BOARD_IRQS
+
+config MACH_MIOA701
+ bool "Mitac Mio A701 Support"
+ select PXA27x
+ select IWMMXT
+ select LEDS_GPIO
+ select HAVE_PWM
+ select GPIO_SYSFS
+ help
+ Say Y here if you intend to run this kernel on a
+ MIO A701. Currently there is only basic support
+ for this PDA.
config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select PXA27x
select IWMMXT
select PXA_SSP
+ select PXA_HAVE_BOARD_IRQS
config ARCH_PXA_PALM
bool "PXA based Palm PDAs"
@@ -237,6 +305,16 @@ config MACH_PALMTX
Say Y here if you intend to run this kernel on a Palm T|X
handheld computer.
+config MACH_PALMZ72
+ bool "Palm Zire 72"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on Palm Zire 72
+ handheld computer.
+
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
select HAVE_PWM
@@ -257,6 +335,9 @@ config PCM990_DISPLAY_NONE
endchoice
+config MACH_AM200EPD
+ depends on MACH_GUMSTIX_F
+ bool "Enable AM200EPD board support"
config PXA_EZX
bool "Motorola EZX Platform"
@@ -344,4 +425,10 @@ config TOSA_BT
This is a simple driver that is able to control
the state of built in bluetooth chip on tosa.
+config PXA_HAVE_BOARD_IRQS
+ bool
+
+config PXA_HAVE_ISA_IRQS
+ bool
+
endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 99ecbe7f8506..d31c9979cfa3 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -6,7 +6,12 @@
obj-y += clock.o devices.o generic.o irq.o dma.o \
time.o gpio.o reset.o
obj-$(CONFIG_PM) += pm.o sleep.o standby.o
-obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o
+
+ifeq ($(CONFIG_CPU_FREQ),y)
+obj-$(CONFIG_PXA25x) += cpufreq-pxa2xx.o
+obj-$(CONFIG_PXA27x) += cpufreq-pxa2xx.o
+obj-$(CONFIG_PXA3xx) += cpufreq-pxa3xx.o
+endif
# Generic drivers that other drivers may depend upon
obj-$(CONFIG_PXA_SSP) += ssp.o
@@ -22,27 +27,33 @@ obj-$(CONFIG_CPU_PXA930) += pxa930.o
# Specific board support
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
+obj-$(CONFIG_MACH_AM200EPD) += am200epd.o
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
+obj-$(CONFIG_MACH_MP900C) += mp900.o
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_MACH_COLIBRI) += colibri.o
-obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
-obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
-obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o
-obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o
+obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
+obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o
+obj-$(CONFIG_MACH_POODLE) += poodle.o
obj-$(CONFIG_MACH_PCM027) += pcm027.o
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
obj-$(CONFIG_MACH_MAGICIAN) += magician.o
-obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o eseries_udc.o
-obj-$(CONFIG_MACH_E740) += e740_lcd.o
-obj-$(CONFIG_MACH_E750) += e750_lcd.o
-obj-$(CONFIG_MACH_E400) += e400_lcd.o
-obj-$(CONFIG_MACH_E800) += e800_lcd.o
+obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
+obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
+obj-$(CONFIG_MACH_E330) += e330.o
+obj-$(CONFIG_MACH_E350) += e350.o
+obj-$(CONFIG_MACH_E740) += e740.o
+obj-$(CONFIG_MACH_E750) += e750.o
+obj-$(CONFIG_MACH_E400) += e400.o
+obj-$(CONFIG_MACH_E800) += e800.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
+obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
+obj-$(CONFIG_ARCH_VIPER) += viper.o
ifeq ($(CONFIG_MACH_ZYLONITE),y)
obj-y += zylonite.o
@@ -53,7 +64,8 @@ obj-$(CONFIG_MACH_LITTLETON) += littleton.o
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
obj-$(CONFIG_MACH_SAAR) += saar.o
-obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o
+obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o
+obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
obj-$(CONFIG_PXA_EZX) += ezx.o
# Support for blinky lights
@@ -61,12 +73,11 @@ led-y := leds.o
led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
-led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o
obj-$(CONFIG_LEDS) += $(led-y)
ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
+obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
endif
obj-$(CONFIG_TOSA_BT) += tosa-bt.o
diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c
deleted file mode 100644
index 5c67b188a3ba..000000000000
--- a/arch/arm/mach-pxa/akita-ioexp.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * Support for the Extra GPIOs on the Sharp SL-C1000 (Akita)
- * (uses a Maxim MAX7310 8 Port IO Expander)
- *
- * Copyright 2005 Openedhand Ltd.
- *
- * Author: Richard Purdie <richard@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <mach/akita.h>
-
-/* MAX7310 Regiser Map */
-#define MAX7310_INPUT 0x00
-#define MAX7310_OUTPUT 0x01
-#define MAX7310_POLINV 0x02
-#define MAX7310_IODIR 0x03 /* 1 = Input, 0 = Output */
-#define MAX7310_TIMEOUT 0x04
-
-/* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x18, I2C_CLIENT_END };
-
-/* I2C Magic */
-I2C_CLIENT_INSMOD;
-
-static int max7310_write(struct i2c_client *client, int address, int data);
-static struct i2c_client max7310_template;
-static void akita_ioexp_work(struct work_struct *private_);
-
-static struct device *akita_ioexp_device;
-static unsigned char ioexp_output_value = AKITA_IOEXP_IO_OUT;
-DECLARE_WORK(akita_ioexp, akita_ioexp_work);
-
-
-/*
- * MAX7310 Access
- */
-static int max7310_config(struct device *dev, int iomode, int polarity)
-{
- int ret;
- struct i2c_client *client = to_i2c_client(dev);
-
- ret = max7310_write(client, MAX7310_POLINV, polarity);
- if (ret < 0)
- return ret;
- ret = max7310_write(client, MAX7310_IODIR, iomode);
- return ret;
-}
-
-static int max7310_set_ouputs(struct device *dev, int outputs)
-{
- struct i2c_client *client = to_i2c_client(dev);
-
- return max7310_write(client, MAX7310_OUTPUT, outputs);
-}
-
-/*
- * I2C Functions
- */
-static int max7310_write(struct i2c_client *client, int address, int value)
-{
- u8 data[2];
-
- data[0] = address & 0xff;
- data[1] = value & 0xff;
-
- if (i2c_master_send(client, data, 2) == 2)
- return 0;
- return -1;
-}
-
-static int max7310_detect(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *new_client;
- int err;
-
- if (!(new_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL)))
- return -ENOMEM;
-
- max7310_template.adapter = adapter;
- max7310_template.addr = address;
-
- memcpy(new_client, &max7310_template, sizeof(struct i2c_client));
-
- if ((err = i2c_attach_client(new_client))) {
- kfree(new_client);
- return err;
- }
-
- max7310_config(&new_client->dev, AKITA_IOEXP_IO_DIR, 0);
- akita_ioexp_device = &new_client->dev;
- schedule_work(&akita_ioexp);
-
- return 0;
-}
-
-static int max7310_attach_adapter(struct i2c_adapter *adapter)
-{
- return i2c_probe(adapter, &addr_data, max7310_detect);
-}
-
-static int max7310_detach_client(struct i2c_client *client)
-{
- int err;
-
- akita_ioexp_device = NULL;
-
- if ((err = i2c_detach_client(client)))
- return err;
-
- kfree(client);
- return 0;
-}
-
-static struct i2c_driver max7310_i2c_driver = {
- .driver = {
- .name = "akita-max7310",
- },
- .id = I2C_DRIVERID_AKITAIOEXP,
- .attach_adapter = max7310_attach_adapter,
- .detach_client = max7310_detach_client,
-};
-
-static struct i2c_client max7310_template = {
- name: "akita-max7310",
- driver: &max7310_i2c_driver,
-};
-
-void akita_set_ioexp(struct device *dev, unsigned char bit)
-{
- ioexp_output_value |= bit;
-
- if (akita_ioexp_device)
- schedule_work(&akita_ioexp);
- return;
-}
-
-void akita_reset_ioexp(struct device *dev, unsigned char bit)
-{
- ioexp_output_value &= ~bit;
-
- if (akita_ioexp_device)
- schedule_work(&akita_ioexp);
- return;
-}
-
-EXPORT_SYMBOL(akita_set_ioexp);
-EXPORT_SYMBOL(akita_reset_ioexp);
-
-static void akita_ioexp_work(struct work_struct *private_)
-{
- if (akita_ioexp_device)
- max7310_set_ouputs(akita_ioexp_device, ioexp_output_value);
-}
-
-
-#ifdef CONFIG_PM
-static int akita_ioexp_suspend(struct platform_device *pdev, pm_message_t state)
-{
- flush_scheduled_work();
- return 0;
-}
-
-static int akita_ioexp_resume(struct platform_device *pdev)
-{
- schedule_work(&akita_ioexp);
- return 0;
-}
-#else
-#define akita_ioexp_suspend NULL
-#define akita_ioexp_resume NULL
-#endif
-
-static int __init akita_ioexp_probe(struct platform_device *pdev)
-{
- return i2c_add_driver(&max7310_i2c_driver);
-}
-
-static int akita_ioexp_remove(struct platform_device *pdev)
-{
- i2c_del_driver(&max7310_i2c_driver);
- return 0;
-}
-
-static struct platform_driver akita_ioexp_driver = {
- .probe = akita_ioexp_probe,
- .remove = akita_ioexp_remove,
- .suspend = akita_ioexp_suspend,
- .resume = akita_ioexp_resume,
- .driver = {
- .name = "akita-ioexp",
- },
-};
-
-static int __init akita_ioexp_init(void)
-{
- return platform_driver_register(&akita_ioexp_driver);
-}
-
-static void __exit akita_ioexp_exit(void)
-{
- platform_driver_unregister(&akita_ioexp_driver);
-}
-
-MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
-MODULE_DESCRIPTION("Akita IO-Expander driver");
-MODULE_LICENSE("GPL");
-
-fs_initcall(akita_ioexp_init);
-module_exit(akita_ioexp_exit);
-
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
new file mode 100644
index 000000000000..b965085a37b9
--- /dev/null
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -0,0 +1,374 @@
+/*
+ * am200epd.c -- Platform device for AM200 EPD kit
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ *
+ * This work was made possible by help and equipment support from E-Ink
+ * Corporation. http://support.eink.com/community
+ *
+ * This driver is written to be used with the Metronome display controller.
+ * on the AM200 EPD prototype kit/development kit with an E-Ink 800x600
+ * Vizplex EPD on a Gumstix board using the Lyre interface board.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <mach/pxafb.h>
+
+#include <video/metronomefb.h>
+
+static unsigned int panel_type = 6;
+static struct platform_device *am200_device;
+static struct metronome_board am200_board;
+
+static struct pxafb_mode_info am200_fb_mode_9inch7 = {
+ .pixclock = 40000,
+ .xres = 1200,
+ .yres = 842,
+ .bpp = 16,
+ .hsync_len = 2,
+ .left_margin = 2,
+ .right_margin = 2,
+ .vsync_len = 1,
+ .upper_margin = 2,
+ .lower_margin = 25,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info am200_fb_mode_8inch = {
+ .pixclock = 40000,
+ .xres = 1088,
+ .yres = 791,
+ .bpp = 16,
+ .hsync_len = 28,
+ .left_margin = 8,
+ .right_margin = 30,
+ .vsync_len = 8,
+ .upper_margin = 10,
+ .lower_margin = 8,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info am200_fb_mode_6inch = {
+ .pixclock = 40189,
+ .xres = 832,
+ .yres = 622,
+ .bpp = 16,
+ .hsync_len = 28,
+ .left_margin = 34,
+ .right_margin = 34,
+ .vsync_len = 25,
+ .upper_margin = 0,
+ .lower_margin = 2,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info am200_fb_info = {
+ .modes = &am200_fb_mode_6inch,
+ .num_modes = 1,
+ .lcd_conn = LCD_TYPE_COLOR_TFT | LCD_PCLK_EDGE_FALL |
+ LCD_AC_BIAS_FREQ(24),
+};
+
+/* register offsets for gpio control */
+#define LED_GPIO_PIN 51
+#define STDBY_GPIO_PIN 48
+#define RST_GPIO_PIN 49
+#define RDY_GPIO_PIN 32
+#define ERR_GPIO_PIN 17
+#define PCBPWR_GPIO_PIN 16
+static int gpios[] = { LED_GPIO_PIN , STDBY_GPIO_PIN , RST_GPIO_PIN,
+ RDY_GPIO_PIN, ERR_GPIO_PIN, PCBPWR_GPIO_PIN };
+static char *gpio_names[] = { "LED" , "STDBY" , "RST", "RDY", "ERR", "PCBPWR" };
+
+static int am200_init_gpio_regs(struct metronomefb_par *par)
+{
+ int i;
+ int err;
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+ err = gpio_request(gpios[i], gpio_names[i]);
+ if (err) {
+ dev_err(&am200_device->dev, "failed requesting "
+ "gpio %s, err=%d\n", gpio_names[i], err);
+ goto err_req_gpio;
+ }
+ }
+
+ gpio_direction_output(LED_GPIO_PIN, 0);
+ gpio_direction_output(STDBY_GPIO_PIN, 0);
+ gpio_direction_output(RST_GPIO_PIN, 0);
+
+ gpio_direction_input(RDY_GPIO_PIN);
+ gpio_direction_input(ERR_GPIO_PIN);
+
+ gpio_direction_output(PCBPWR_GPIO_PIN, 0);
+
+ return 0;
+
+err_req_gpio:
+ while (i > 0)
+ gpio_free(gpios[i--]);
+
+ return err;
+}
+
+static void am200_cleanup(struct metronomefb_par *par)
+{
+ int i;
+
+ free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++)
+ gpio_free(gpios[i]);
+}
+
+static int am200_share_video_mem(struct fb_info *info)
+{
+ /* rough check if this is our desired fb and not something else */
+ if ((info->var.xres != am200_fb_info.modes->xres)
+ || (info->var.yres != am200_fb_info.modes->yres))
+ return 0;
+
+ /* we've now been notified that we have our new fb */
+ am200_board.metromem = info->screen_base;
+ am200_board.host_fbinfo = info;
+
+ /* try to refcount host drv since we are the consumer after this */
+ if (!try_module_get(info->fbops->owner))
+ return -ENODEV;
+
+ return 0;
+}
+
+static int am200_unshare_video_mem(struct fb_info *info)
+{
+ dev_dbg(&am200_device->dev, "ENTER %s\n", __func__);
+
+ if (info != am200_board.host_fbinfo)
+ return 0;
+
+ module_put(am200_board.host_fbinfo->fbops->owner);
+ return 0;
+}
+
+static int am200_fb_notifier_callback(struct notifier_block *self,
+ unsigned long event, void *data)
+{
+ struct fb_event *evdata = data;
+ struct fb_info *info = evdata->info;
+
+ dev_dbg(&am200_device->dev, "ENTER %s\n", __func__);
+
+ if (event == FB_EVENT_FB_REGISTERED)
+ return am200_share_video_mem(info);
+ else if (event == FB_EVENT_FB_UNREGISTERED)
+ return am200_unshare_video_mem(info);
+
+ return 0;
+}
+
+static struct notifier_block am200_fb_notif = {
+ .notifier_call = am200_fb_notifier_callback,
+};
+
+/* this gets called as part of our init. these steps must be done now so
+ * that we can use set_pxa_fb_info */
+static void __init am200_presetup_fb(void)
+{
+ int fw;
+ int fh;
+ int padding_size;
+ int totalsize;
+
+ switch (panel_type) {
+ case 6:
+ am200_fb_info.modes = &am200_fb_mode_6inch;
+ break;
+ case 8:
+ am200_fb_info.modes = &am200_fb_mode_8inch;
+ break;
+ case 97:
+ am200_fb_info.modes = &am200_fb_mode_9inch7;
+ break;
+ default:
+ dev_err(&am200_device->dev, "invalid panel_type selection,"
+ " setting to 6\n");
+ am200_fb_info.modes = &am200_fb_mode_6inch;
+ break;
+ }
+
+ /* the frame buffer is divided as follows:
+ command | CRC | padding
+ 16kb waveform data | CRC | padding
+ image data | CRC
+ */
+
+ fw = am200_fb_info.modes->xres;
+ fh = am200_fb_info.modes->yres;
+
+ /* waveform must be 16k + 2 for checksum */
+ am200_board.wfm_size = roundup(16*1024 + 2, fw);
+
+ padding_size = PAGE_SIZE + (4 * fw);
+
+ /* total is 1 cmd , 1 wfm, padding and image */
+ totalsize = fw + am200_board.wfm_size + padding_size + (fw*fh);
+
+ /* save this off because we're manipulating fw after this and
+ * we'll need it when we're ready to setup the framebuffer */
+ am200_board.fw = fw;
+ am200_board.fh = fh;
+
+ /* the reason we do this adjustment is because we want to acquire
+ * more framebuffer memory without imposing custom awareness on the
+ * underlying pxafb driver */
+ am200_fb_info.modes->yres = DIV_ROUND_UP(totalsize, fw);
+
+ /* we divide since we told the LCD controller we're 16bpp */
+ am200_fb_info.modes->xres /= 2;
+
+ set_pxa_fb_info(&am200_fb_info);
+
+}
+
+/* this gets called by metronomefb as part of its init, in our case, we
+ * have already completed initial framebuffer init in presetup_fb so we
+ * can just setup the fb access pointers */
+static int am200_setup_fb(struct metronomefb_par *par)
+{
+ int fw;
+ int fh;
+
+ fw = am200_board.fw;
+ fh = am200_board.fh;
+
+ /* metromem was set up by the notifier in share_video_mem so now
+ * we can use its value to calculate the other entries */
+ par->metromem_cmd = (struct metromem_cmd *) am200_board.metromem;
+ par->metromem_wfm = am200_board.metromem + fw;
+ par->metromem_img = par->metromem_wfm + am200_board.wfm_size;
+ par->metromem_img_csum = (u16 *) (par->metromem_img + (fw * fh));
+ par->metromem_dma = am200_board.host_fbinfo->fix.smem_start;
+
+ return 0;
+}
+
+static int am200_get_panel_type(void)
+{
+ return panel_type;
+}
+
+static irqreturn_t am200_handle_irq(int irq, void *dev_id)
+{
+ struct metronomefb_par *par = dev_id;
+
+ wake_up_interruptible(&par->waitq);
+ return IRQ_HANDLED;
+}
+
+static int am200_setup_irq(struct fb_info *info)
+{
+ int ret;
+
+ ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am200_handle_irq,
+ IRQF_DISABLED|IRQF_TRIGGER_FALLING,
+ "AM200", info->par);
+ if (ret)
+ dev_err(&am200_device->dev, "request_irq failed: %d\n", ret);
+
+ return ret;
+}
+
+static void am200_set_rst(struct metronomefb_par *par, int state)
+{
+ gpio_set_value(RST_GPIO_PIN, state);
+}
+
+static void am200_set_stdby(struct metronomefb_par *par, int state)
+{
+ gpio_set_value(STDBY_GPIO_PIN, state);
+}
+
+static int am200_wait_event(struct metronomefb_par *par)
+{
+ return wait_event_timeout(par->waitq, gpio_get_value(RDY_GPIO_PIN), HZ);
+}
+
+static int am200_wait_event_intr(struct metronomefb_par *par)
+{
+ return wait_event_interruptible_timeout(par->waitq,
+ gpio_get_value(RDY_GPIO_PIN), HZ);
+}
+
+static struct metronome_board am200_board = {
+ .owner = THIS_MODULE,
+ .setup_irq = am200_setup_irq,
+ .setup_io = am200_init_gpio_regs,
+ .setup_fb = am200_setup_fb,
+ .set_rst = am200_set_rst,
+ .set_stdby = am200_set_stdby,
+ .met_wait_event = am200_wait_event,
+ .met_wait_event_intr = am200_wait_event_intr,
+ .get_panel_type = am200_get_panel_type,
+ .cleanup = am200_cleanup,
+};
+
+static int __init am200_init(void)
+{
+ int ret;
+
+ /* before anything else, we request notification for any fb
+ * creation events */
+ fb_register_client(&am200_fb_notif);
+
+ /* request our platform independent driver */
+ request_module("metronomefb");
+
+ am200_device = platform_device_alloc("metronomefb", -1);
+ if (!am200_device)
+ return -ENOMEM;
+
+ /* the am200_board that will be seen by metronomefb is a copy */
+ platform_device_add_data(am200_device, &am200_board,
+ sizeof(am200_board));
+
+ /* this _add binds metronomefb to am200. metronomefb refcounts am200 */
+ ret = platform_device_add(am200_device);
+
+ if (ret) {
+ platform_device_put(am200_device);
+ fb_unregister_client(&am200_fb_notif);
+ return ret;
+ }
+
+ am200_presetup_fb();
+
+ return 0;
+}
+
+module_param(panel_type, uint, 0);
+MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97");
+
+module_init(am200_init);
+
+MODULE_DESCRIPTION("board driver for am200 metronome epd kit");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
new file mode 100644
index 000000000000..83a4cdf08176
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -0,0 +1,258 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x255.c
+ *
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand-gpio.h>
+
+#include <linux/spi/spi.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/bitfield.h>
+
+#include "generic.h"
+
+#define GPIO_NAND_CS (5)
+#define GPIO_NAND_ALE (4)
+#define GPIO_NAND_CLE (3)
+#define GPIO_NAND_RB (10)
+
+static unsigned long cmx255_pin_config[] = {
+ /* AC'97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* SSP1 */
+ GPIO23_SSP1_SCLK,
+ GPIO24_SSP1_SFRM,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+
+ /* SSP2 */
+ GPIO81_SSP2_CLK_OUT,
+ GPIO82_SSP2_FRM_OUT,
+ GPIO83_SSP2_TXD,
+ GPIO84_SSP2_RXD,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* SDRAM and local bus */
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO79_nCS_3,
+ GPIO80_nCS_4,
+ GPIO33_nCS_5,
+ GPIO18_RDY,
+
+ /* GPIO */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,
+ GPIO9_GPIO, /* PC card reset */
+
+ /* NAND controls */
+ GPIO5_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
+ GPIO4_GPIO | MFP_LPM_DRIVE_LOW, /* NAND ALE */
+ GPIO3_GPIO | MFP_LPM_DRIVE_LOW, /* NAND CLE */
+ GPIO10_GPIO, /* NAND Ready/Busy */
+
+ /* interrupts */
+ GPIO22_GPIO, /* DM9000 interrupt */
+};
+
+#if defined(CONFIG_SPI_PXA2XX)
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+ .num_chipselect = 1,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+ [0] = {
+ .modalias = "rtc-max6902",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 0,
+ },
+};
+
+static void __init cmx255_init_rtc(void)
+{
+ pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+ spi_register_board_info(ARRAY_AND_SIZE(spi_board_info));
+}
+#else
+static inline void cmx255_init_rtc(void) {}
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition cmx255_nor_partitions[] = {
+ {
+ .name = "ARMmon",
+ .size = 0x00030000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ } , {
+ .name = "ARMmon setup block",
+ .size = 0x00010000,
+ .offset = MTDPART_OFS_APPEND,
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ } , {
+ .name = "kernel",
+ .size = 0x00160000,
+ .offset = MTDPART_OFS_APPEND,
+ } , {
+ .name = "ramdisk",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND
+ }
+};
+
+static struct physmap_flash_data cmx255_nor_flash_data[] = {
+ {
+ .width = 2, /* bankwidth in bytes */
+ .parts = cmx255_nor_partitions,
+ .nr_parts = ARRAY_SIZE(cmx255_nor_partitions)
+ }
+};
+
+static struct resource cmx255_nor_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device cmx255_nor = {
+ .name = "physmap-flash",
+ .id = -1,
+ .dev = {
+ .platform_data = cmx255_nor_flash_data,
+ },
+ .resource = &cmx255_nor_resource,
+ .num_resources = 1,
+};
+
+static void __init cmx255_init_nor(void)
+{
+ platform_device_register(&cmx255_nor);
+}
+#else
+static inline void cmx255_init_nor(void) {}
+#endif
+
+#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
+static struct resource cmx255_nand_resource[] = {
+ [0] = {
+ .start = PXA_CS1_PHYS,
+ .end = PXA_CS1_PHYS + 11,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_CS5_PHYS,
+ .end = PXA_CS5_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mtd_partition cmx255_nand_parts[] = {
+ [0] = {
+ .name = "cmx255-nand",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0,
+ },
+};
+
+static struct gpio_nand_platdata cmx255_nand_platdata = {
+ .gpio_nce = GPIO_NAND_CS,
+ .gpio_cle = GPIO_NAND_CLE,
+ .gpio_ale = GPIO_NAND_ALE,
+ .gpio_rdy = GPIO_NAND_RB,
+ .gpio_nwp = -1,
+ .parts = cmx255_nand_parts,
+ .num_parts = ARRAY_SIZE(cmx255_nand_parts),
+ .chip_delay = 25,
+};
+
+static struct platform_device cmx255_nand = {
+ .name = "gpio-nand",
+ .num_resources = ARRAY_SIZE(cmx255_nand_resource),
+ .resource = cmx255_nand_resource,
+ .id = -1,
+ .dev = {
+ .platform_data = &cmx255_nand_platdata,
+ }
+};
+
+static void __init cmx255_init_nand(void)
+{
+ platform_device_register(&cmx255_nand);
+}
+#else
+static inline void cmx255_init_nand(void) {}
+#endif
+
+void __init cmx255_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx255_pin_config));
+
+ cmx255_init_rtc();
+ cmx255_init_nor();
+ cmx255_init_nand();
+}
diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h
deleted file mode 100644
index 48f532f4cb51..000000000000
--- a/arch/arm/mach-pxa/cm-x270-pci.h
+++ /dev/null
@@ -1,13 +0,0 @@
-extern void __cmx270_pci_init_irq(int irq_gpio);
-extern void __cmx270_pci_suspend(void);
-extern void __cmx270_pci_resume(void);
-
-#ifdef CONFIG_PCI
-#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x)
-#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x)
-#define cmx270_pci_resume(x) __cmx270_pci_resume(x)
-#else
-#define cmx270_pci_init_irq(x) do {} while (0)
-#define cmx270_pci_suspend(x) do {} while (0)
-#define cmx270_pci_resume(x) do {} while (0)
-#endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index af003a269534..a82dad1a8cc8 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -14,46 +14,22 @@
#include <linux/irq.h>
#include <linux/gpio.h>
-#include <linux/dm9000.h>
#include <linux/rtc-v3020.h>
#include <video/mbxfb.h>
-#include <linux/leds.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
#include <mach/ohci.h>
#include <mach/mmc.h>
-#include <mach/bitfield.h>
-
-#include <asm/hardware/it8152.h>
#include "generic.h"
-#include "cm-x270-pci.h"
-
-/* virtual addresses for statically mapped regions */
-#define CMX270_VIRT_BASE (0xe8000000)
-#define CMX270_IT8152_VIRT (CMX270_VIRT_BASE)
+/* physical address if local-bus attached devices */
#define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22))
-#define DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22))
/* GPIO IRQ usage */
-#define GPIO10_ETHIRQ (10)
-#define GPIO22_IT8152_IRQ (22)
#define GPIO83_MMC_IRQ (83)
-#define GPIO95_GFXIRQ (95)
-#define CMX270_ETHIRQ IRQ_GPIO(GPIO10_ETHIRQ)
-#define CMX270_IT8152_IRQ IRQ_GPIO(GPIO22_IT8152_IRQ)
#define CMX270_MMC_IRQ IRQ_GPIO(GPIO83_MMC_IRQ)
-#define CMX270_GFXIRQ IRQ_GPIO(GPIO95_GFXIRQ)
/* MMC power enable */
#define GPIO105_MMC_POWER (105)
@@ -157,62 +133,6 @@ static unsigned long cmx270_pin_config[] = {
GPIO83_GPIO, /* MMC card detect */
};
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource cmx270_dm9000_resource[] = {
- [0] = {
- .start = DM9000_PHYS_BASE,
- .end = DM9000_PHYS_BASE + 4,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DM9000_PHYS_BASE + 8,
- .end = DM9000_PHYS_BASE + 8 + 500,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = CMX270_ETHIRQ,
- .end = CMX270_ETHIRQ,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- }
-};
-
-static struct dm9000_plat_data cmx270_dm9000_platdata = {
- .flags = DM9000_PLATF_32BITONLY,
-};
-
-static struct platform_device cmx270_dm9000_device = {
- .name = "dm9000",
- .id = 0,
- .num_resources = ARRAY_SIZE(cmx270_dm9000_resource),
- .resource = cmx270_dm9000_resource,
- .dev = {
- .platform_data = &cmx270_dm9000_platdata,
- }
-};
-
-static void __init cmx270_init_dm9000(void)
-{
- platform_device_register(&cmx270_dm9000_device);
-}
-#else
-static inline void cmx270_init_dm9000(void) {}
-#endif
-
-/* UCB1400 touchscreen controller */
-#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static struct platform_device cmx270_ts_device = {
- .name = "ucb1400_ts",
- .id = -1,
-};
-
-static void __init cmx270_init_touchscreen(void)
-{
- platform_device_register(&cmx270_ts_device);
-}
-#else
-static inline void cmx270_init_touchscreen(void) {}
-#endif
-
/* V3020 RTC */
#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
static struct resource cmx270_v3020_resource[] = {
@@ -242,45 +162,7 @@ static void __init cmx270_init_rtc(void)
platform_device_register(&cmx270_rtc_device);
}
#else
-static inline void cmx270_init_rtc(void) {}
-#endif
-
-/* CM-X270 LEDs */
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led cmx270_leds[] = {
- [0] = {
- .name = "cm-x270:red",
- .default_trigger = "nand-disk",
- .gpio = 93,
- .active_low = 1,
- },
- [1] = {
- .name = "cm-x270:green",
- .default_trigger = "heartbeat",
- .gpio = 94,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
- .num_leds = ARRAY_SIZE(cmx270_leds),
- .leds = cmx270_leds,
-};
-
-static struct platform_device cmx270_led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &cmx270_gpio_led_pdata,
- },
-};
-
-static void __init cmx270_init_leds(void)
-{
- platform_device_register(&cmx270_led_device);
-}
-#else
-static inline void cmx270_init_leds(void) {}
+static inline void cmx2xx_init_rtc(void) {}
#endif
/* 2700G graphics */
@@ -373,238 +255,11 @@ static void __init cmx270_init_2700G(void)
static inline void cmx270_init_2700G(void) {}
#endif
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-/*
- Display definitions
- keep these for backwards compatibility, although symbolic names (as
- e.g. in lpd270.c) looks better
-*/
-#define MTYPE_STN320x240 0
-#define MTYPE_TFT640x480 1
-#define MTYPE_CRT640x480 2
-#define MTYPE_CRT800x600 3
-#define MTYPE_TFT320x240 6
-#define MTYPE_STN640x480 7
-
-static struct pxafb_mode_info generic_stn_320x240_mode = {
- .pixclock = 76923,
- .bpp = 8,
- .xres = 320,
- .yres = 240,
- .hsync_len = 3,
- .vsync_len = 2,
- .left_margin = 3,
- .upper_margin = 0,
- .right_margin = 3,
- .lower_margin = 0,
- .sync = (FB_SYNC_HOR_HIGH_ACT |
- FB_SYNC_VERT_HIGH_ACT),
- .cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_stn_320x240 = {
- .modes = &generic_stn_320x240_mode,
- .num_modes = 1,
- .lccr0 = 0,
- .lccr3 = (LCCR3_PixClkDiv(0x03) |
- LCCR3_Acb(0xff) |
- LCCR3_PCP),
- .cmap_inverse = 0,
- .cmap_static = 0,
-};
-
-static struct pxafb_mode_info generic_tft_640x480_mode = {
- .pixclock = 38461,
- .bpp = 8,
- .xres = 640,
- .yres = 480,
- .hsync_len = 60,
- .vsync_len = 2,
- .left_margin = 70,
- .upper_margin = 10,
- .right_margin = 70,
- .lower_margin = 5,
- .sync = 0,
- .cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_tft_640x480 = {
- .modes = &generic_tft_640x480_mode,
- .num_modes = 1,
- .lccr0 = (LCCR0_PAS),
- .lccr3 = (LCCR3_PixClkDiv(0x01) |
- LCCR3_Acb(0xff) |
- LCCR3_PCP),
- .cmap_inverse = 0,
- .cmap_static = 0,
-};
-
-static struct pxafb_mode_info generic_crt_640x480_mode = {
- .pixclock = 38461,
- .bpp = 8,
- .xres = 640,
- .yres = 480,
- .hsync_len = 63,
- .vsync_len = 2,
- .left_margin = 81,
- .upper_margin = 33,
- .right_margin = 16,
- .lower_margin = 10,
- .sync = (FB_SYNC_HOR_HIGH_ACT |
- FB_SYNC_VERT_HIGH_ACT),
- .cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_crt_640x480 = {
- .modes = &generic_crt_640x480_mode,
- .num_modes = 1,
- .lccr0 = (LCCR0_PAS),
- .lccr3 = (LCCR3_PixClkDiv(0x01) |
- LCCR3_Acb(0xff)),
- .cmap_inverse = 0,
- .cmap_static = 0,
-};
-
-static struct pxafb_mode_info generic_crt_800x600_mode = {
- .pixclock = 28846,
- .bpp = 8,
- .xres = 800,
- .yres = 600,
- .hsync_len = 63,
- .vsync_len = 2,
- .left_margin = 26,
- .upper_margin = 21,
- .right_margin = 26,
- .lower_margin = 11,
- .sync = (FB_SYNC_HOR_HIGH_ACT |
- FB_SYNC_VERT_HIGH_ACT),
- .cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_crt_800x600 = {
- .modes = &generic_crt_800x600_mode,
- .num_modes = 1,
- .lccr0 = (LCCR0_PAS),
- .lccr3 = (LCCR3_PixClkDiv(0x02) |
- LCCR3_Acb(0xff)),
- .cmap_inverse = 0,
- .cmap_static = 0,
-};
-
-static struct pxafb_mode_info generic_tft_320x240_mode = {
- .pixclock = 134615,
- .bpp = 16,
- .xres = 320,
- .yres = 240,
- .hsync_len = 63,
- .vsync_len = 7,
- .left_margin = 75,
- .upper_margin = 0,
- .right_margin = 15,
- .lower_margin = 15,
- .sync = 0,
- .cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_tft_320x240 = {
- .modes = &generic_tft_320x240_mode,
- .num_modes = 1,
- .lccr0 = (LCCR0_PAS),
- .lccr3 = (LCCR3_PixClkDiv(0x06) |
- LCCR3_Acb(0xff) |
- LCCR3_PCP),
- .cmap_inverse = 0,
- .cmap_static = 0,
-};
-
-static struct pxafb_mode_info generic_stn_640x480_mode = {
- .pixclock = 57692,
- .bpp = 8,
- .xres = 640,
- .yres = 480,
- .hsync_len = 4,
- .vsync_len = 2,
- .left_margin = 10,
- .upper_margin = 5,
- .right_margin = 10,
- .lower_margin = 5,
- .sync = (FB_SYNC_HOR_HIGH_ACT |
- FB_SYNC_VERT_HIGH_ACT),
- .cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_stn_640x480 = {
- .modes = &generic_stn_640x480_mode,
- .num_modes = 1,
- .lccr0 = 0,
- .lccr3 = (LCCR3_PixClkDiv(0x02) |
- LCCR3_Acb(0xff)),
- .cmap_inverse = 0,
- .cmap_static = 0,
-};
-
-static struct pxafb_mach_info *cmx270_display = &generic_crt_640x480;
-
-static int __init cmx270_set_display(char *str)
-{
- int disp_type = simple_strtol(str, NULL, 0);
- switch (disp_type) {
- case MTYPE_STN320x240:
- cmx270_display = &generic_stn_320x240;
- break;
- case MTYPE_TFT640x480:
- cmx270_display = &generic_tft_640x480;
- break;
- case MTYPE_CRT640x480:
- cmx270_display = &generic_crt_640x480;
- break;
- case MTYPE_CRT800x600:
- cmx270_display = &generic_crt_800x600;
- break;
- case MTYPE_TFT320x240:
- cmx270_display = &generic_tft_320x240;
- break;
- case MTYPE_STN640x480:
- cmx270_display = &generic_stn_640x480;
- break;
- default: /* fallback to CRT 640x480 */
- cmx270_display = &generic_crt_640x480;
- break;
- }
- return 1;
-}
-
-/*
- This should be done really early to get proper configuration for
- frame buffer.
- Indeed, pxafb parameters can be used istead, but CM-X270 bootloader
- has limitied line length for kernel command line, and also it will
- break compatibitlty with proprietary releases already in field.
-*/
-__setup("monitor=", cmx270_set_display);
-
-static void __init cmx270_init_display(void)
-{
- set_pxa_fb_info(cmx270_display);
-}
-#else
-static inline void cmx270_init_display(void) {}
-#endif
-
/* PXA27x OHCI controller setup */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int cmx270_ohci_init(struct device *dev)
-{
- /* Set the Power Control Polarity Low */
- UHCHR = (UHCHR | UHCHR_PCPL) &
- ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
-
- return 0;
-}
-
static struct pxaohci_platform_data cmx270_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
- .init = cmx270_ohci_init,
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
};
static void __init cmx270_init_ohci(void)
@@ -676,131 +331,12 @@ static void __init cmx270_init_mmc(void)
static inline void cmx270_init_mmc(void) {}
#endif
-#ifdef CONFIG_PM
-static unsigned long sleep_save_msc[10];
-
-static int cmx270_suspend(struct sys_device *dev, pm_message_t state)
-{
- cmx270_pci_suspend();
-
- /* save MSC registers */
- sleep_save_msc[0] = MSC0;
- sleep_save_msc[1] = MSC1;
- sleep_save_msc[2] = MSC2;
-
- /* setup power saving mode registers */
- PCFR = 0x0;
- PSLR = 0xff400000;
- PMCR = 0x00000005;
- PWER = 0x80000000;
- PFER = 0x00000000;
- PRER = 0x00000000;
- PGSR0 = 0xC0018800;
- PGSR1 = 0x004F0002;
- PGSR2 = 0x6021C000;
- PGSR3 = 0x00020000;
-
- return 0;
-}
-
-static int cmx270_resume(struct sys_device *dev)
-{
- cmx270_pci_resume();
-
- /* restore MSC registers */
- MSC0 = sleep_save_msc[0];
- MSC1 = sleep_save_msc[1];
- MSC2 = sleep_save_msc[2];
-
- return 0;
-}
-
-static struct sysdev_class cmx270_pm_sysclass = {
- .name = "pm",
- .resume = cmx270_resume,
- .suspend = cmx270_suspend,
-};
-
-static struct sys_device cmx270_pm_device = {
- .cls = &cmx270_pm_sysclass,
-};
-
-static int __init cmx270_pm_init(void)
-{
- int error;
- error = sysdev_class_register(&cmx270_pm_sysclass);
- if (error == 0)
- error = sysdev_register(&cmx270_pm_device);
- return error;
-}
-#else
-static int __init cmx270_pm_init(void) { return 0; }
-#endif
-
-#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
-static void __init cmx270_init_ac97(void)
-{
- pxa_set_ac97_info(NULL);
-}
-#else
-static inline void cmx270_init_ac97(void) {}
-#endif
-
-static void __init cmx270_init(void)
+void __init cmx270_init(void)
{
- cmx270_pm_init();
-
pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
- cmx270_init_dm9000();
cmx270_init_rtc();
- cmx270_init_display();
cmx270_init_mmc();
cmx270_init_ohci();
- cmx270_init_ac97();
- cmx270_init_touchscreen();
- cmx270_init_leds();
cmx270_init_2700G();
}
-
-static void __init cmx270_init_irq(void)
-{
- pxa27x_init_irq();
-
- cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
-}
-
-#ifdef CONFIG_PCI
-/* Map PCI companion statically */
-static struct map_desc cmx270_io_desc[] __initdata = {
- [0] = { /* PCI bridge */
- .virtual = CMX270_IT8152_VIRT,
- .pfn = __phys_to_pfn(PXA_CS4_PHYS),
- .length = SZ_64M,
- .type = MT_DEVICE
- },
-};
-
-static void __init cmx270_map_io(void)
-{
- pxa_map_io();
- iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
-
- it8152_base_address = CMX270_IT8152_VIRT;
-}
-#else
-static void __init cmx270_map_io(void)
-{
- pxa_map_io();
-}
-#endif
-
-MACHINE_START(ARMCORE, "Compulab CM-x270")
- .boot_params = 0xa0000100,
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .map_io = cmx270_map_io,
- .init_irq = cmx270_init_irq,
- .timer = &pxa_timer,
- .init_machine = cmx270_init,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 2d5bcea1e520..3156b25f6e9d 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-pxa/cm-x270-pci.c
+ * linux/arch/arm/mach-pxa/cm-x2xx-pci.c
*
* PCI bios-type initialisation for PCI machines
*
@@ -28,7 +28,7 @@
#include <asm/hardware/it8152.h>
unsigned long it8152_base_address;
-static int cmx270_it8152_irq_gpio;
+static int cmx2xx_it8152_irq_gpio;
/*
* Only first 64MB of memory can be accessed via PCI.
@@ -36,13 +36,13 @@ static int cmx270_it8152_irq_gpio;
* This is really ugly and we need a better way of specifying
* DMA-capable regions of memory.
*/
-void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
+void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size,
unsigned long *zhole_size)
{
unsigned int sz = SZ_64M >> PAGE_SHIFT;
if (machine_is_armcore()) {
- pr_info("Adjusting zones for CM-X270\n");
+ pr_info("Adjusting zones for CM-X2XX\n");
/*
* Only adjust if > 64M on current system
@@ -57,29 +57,29 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
}
}
-static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
+static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
{
/* clear our parent irq */
- GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio);
+ GEDR(cmx2xx_it8152_irq_gpio) = GPIO_bit(cmx2xx_it8152_irq_gpio);
it8152_irq_demux(irq, desc);
}
-void __cmx270_pci_init_irq(int irq_gpio)
+void __cmx2xx_pci_init_irq(int irq_gpio)
{
it8152_init_irq();
- cmx270_it8152_irq_gpio = irq_gpio;
+ cmx2xx_it8152_irq_gpio = irq_gpio;
set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
- set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
+ set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx2xx_it8152_irq_demux);
}
#ifdef CONFIG_PM
static unsigned long sleep_save_ite[10];
-void __cmx270_pci_suspend(void)
+void __cmx2xx_pci_suspend(void)
{
/* save ITE state */
sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR);
@@ -91,7 +91,7 @@ void __cmx270_pci_suspend(void)
__raw_writel((0), IT8152_INTC_LPCNIRR);
}
-void __cmx270_pci_resume(void)
+void __cmx2xx_pci_resume(void)
{
/* restore IT8152 state */
__raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR);
@@ -99,12 +99,12 @@ void __cmx270_pci_resume(void)
__raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR);
}
#else
-void cmx270_pci_suspend(void) {}
-void cmx270_pci_resume(void) {}
+void cmx2xx_pci_suspend(void) {}
+void cmx2xx_pci_resume(void) {}
#endif
/* PCI IRQ mapping*/
-static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init cmx2xx_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
@@ -116,14 +116,14 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
/*
Here comes the ugly part. The routing is baseboard specific,
- but defining a platform for each possible base of CM-X270 is
- unrealistic. Here we keep mapping for ATXBase and SB-X270.
+ but defining a platform for each possible base of CM-X2XX is
+ unrealistic. Here we keep mapping for ATXBase and SB-X2XX.
*/
/* ATXBASE PCI slot */
if (slot == 7)
return IT8152_PCI_INTA;
- /* ATXBase/SB-x270 CardBus */
+ /* ATXBase/SB-X2XX CardBus */
if (slot == 8 || slot == 0)
return IT8152_PCI_INTB;
@@ -131,7 +131,11 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
if (slot == 9)
return IT8152_PCI_INTA;
- /* SB-x270 Ethernet */
+ /* CM-x255 Onboard Ethernet */
+ if (slot == 15)
+ return IT8152_PCI_INTC;
+
+ /* SB-x2xx Ethernet */
if (slot == 16)
return IT8152_PCI_INTA;
@@ -144,9 +148,9 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
return(0);
}
-static void cmx270_pci_preinit(void)
+static void cmx2xx_pci_preinit(void)
{
- pr_info("Initializing CM-X270 PCI subsystem\n");
+ pr_info("Initializing CM-X2XX PCI subsystem\n");
__raw_writel(0x800, IT8152_PCI_CFG_ADDR);
if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
@@ -200,21 +204,21 @@ static void cmx270_pci_preinit(void)
}
}
-static struct hw_pci cmx270_pci __initdata = {
+static struct hw_pci cmx2xx_pci __initdata = {
.swizzle = pci_std_swizzle,
- .map_irq = cmx270_pci_map_irq,
+ .map_irq = cmx2xx_pci_map_irq,
.nr_controllers = 1,
.setup = it8152_pci_setup,
.scan = it8152_pci_scan_bus,
- .preinit = cmx270_pci_preinit,
+ .preinit = cmx2xx_pci_preinit,
};
-static int __init cmx270_init_pci(void)
+static int __init cmx2xx_init_pci(void)
{
if (machine_is_armcore())
- pci_common_init(&cmx270_pci);
+ pci_common_init(&cmx2xx_pci);
return 0;
}
-subsys_initcall(cmx270_init_pci);
+subsys_initcall(cmx2xx_init_pci);
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.h b/arch/arm/mach-pxa/cm-x2xx-pci.h
new file mode 100644
index 000000000000..e24aad2e3ad7
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.h
@@ -0,0 +1,13 @@
+extern void __cmx2xx_pci_init_irq(int irq_gpio);
+extern void __cmx2xx_pci_suspend(void);
+extern void __cmx2xx_pci_resume(void);
+
+#ifdef CONFIG_PCI
+#define cmx2xx_pci_init_irq(x) __cmx2xx_pci_init_irq(x)
+#define cmx2xx_pci_suspend(x) __cmx2xx_pci_suspend(x)
+#define cmx2xx_pci_resume(x) __cmx2xx_pci_resume(x)
+#else
+#define cmx2xx_pci_init_irq(x) do {} while (0)
+#define cmx2xx_pci_suspend(x) do {} while (0)
+#define cmx2xx_pci_resume(x) do {} while (0)
+#endif
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
new file mode 100644
index 000000000000..0b3ce3b6d896
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -0,0 +1,531 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x2xx.c
+ *
+ * Copyright (C) 2008 CompuLab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <linux/dm9000.h>
+#include <linux/leds.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+
+#include <asm/hardware/it8152.h>
+
+#include "generic.h"
+#include "cm-x2xx-pci.h"
+
+extern void cmx255_init(void);
+extern void cmx270_init(void);
+
+/* virtual addresses for statically mapped regions */
+#define CMX2XX_VIRT_BASE (0xe8000000)
+#define CMX2XX_IT8152_VIRT (CMX2XX_VIRT_BASE)
+
+/* physical address if local-bus attached devices */
+#define CMX255_DM9000_PHYS_BASE (PXA_CS1_PHYS + (8 << 22))
+#define CMX270_DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22))
+
+/* leds */
+#define CMX255_GPIO_RED (27)
+#define CMX255_GPIO_GREEN (32)
+#define CMX270_GPIO_RED (93)
+#define CMX270_GPIO_GREEN (94)
+
+/* GPIO IRQ usage */
+#define GPIO22_ETHIRQ (22)
+#define GPIO10_ETHIRQ (10)
+#define CMX255_GPIO_IT8152_IRQ (0)
+#define CMX270_GPIO_IT8152_IRQ (22)
+
+#define CMX255_ETHIRQ IRQ_GPIO(GPIO22_ETHIRQ)
+#define CMX270_ETHIRQ IRQ_GPIO(GPIO10_ETHIRQ)
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource cmx255_dm9000_resource[] = {
+ [0] = {
+ .start = CMX255_DM9000_PHYS_BASE,
+ .end = CMX255_DM9000_PHYS_BASE + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CMX255_DM9000_PHYS_BASE + 4,
+ .end = CMX255_DM9000_PHYS_BASE + 4 + 500,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = CMX255_ETHIRQ,
+ .end = CMX255_ETHIRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct resource cmx270_dm9000_resource[] = {
+ [0] = {
+ .start = CMX270_DM9000_PHYS_BASE,
+ .end = CMX270_DM9000_PHYS_BASE + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CMX270_DM9000_PHYS_BASE + 8,
+ .end = CMX270_DM9000_PHYS_BASE + 8 + 500,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = CMX270_ETHIRQ,
+ .end = CMX270_ETHIRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct dm9000_plat_data cmx270_dm9000_platdata = {
+ .flags = DM9000_PLATF_32BITONLY,
+};
+
+static struct platform_device cmx2xx_dm9000_device = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(cmx270_dm9000_resource),
+ .dev = {
+ .platform_data = &cmx270_dm9000_platdata,
+ }
+};
+
+static void __init cmx2xx_init_dm9000(void)
+{
+ if (cpu_is_pxa25x())
+ cmx2xx_dm9000_device.resource = cmx255_dm9000_resource;
+ else
+ cmx2xx_dm9000_device.resource = cmx270_dm9000_resource;
+ platform_device_register(&cmx2xx_dm9000_device);
+}
+#else
+static inline void cmx2xx_init_dm9000(void) {}
+#endif
+
+/* UCB1400 touchscreen controller */
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static struct platform_device cmx2xx_ts_device = {
+ .name = "ucb1400_ts",
+ .id = -1,
+};
+
+static void __init cmx2xx_init_touchscreen(void)
+{
+ platform_device_register(&cmx2xx_ts_device);
+}
+#else
+static inline void cmx2xx_init_touchscreen(void) {}
+#endif
+
+/* CM-X270 LEDs */
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cmx2xx_leds[] = {
+ [0] = {
+ .name = "cm-x2xx:red",
+ .default_trigger = "nand-disk",
+ .active_low = 1,
+ },
+ [1] = {
+ .name = "cm-x2xx:green",
+ .default_trigger = "heartbeat",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data cmx2xx_gpio_led_pdata = {
+ .num_leds = ARRAY_SIZE(cmx2xx_leds),
+ .leds = cmx2xx_leds,
+};
+
+static struct platform_device cmx2xx_led_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &cmx2xx_gpio_led_pdata,
+ },
+};
+
+static void __init cmx2xx_init_leds(void)
+{
+ if (cpu_is_pxa25x()) {
+ cmx2xx_leds[0].gpio = CMX255_GPIO_RED;
+ cmx2xx_leds[1].gpio = CMX255_GPIO_GREEN;
+ } else {
+ cmx2xx_leds[0].gpio = CMX270_GPIO_RED;
+ cmx2xx_leds[1].gpio = CMX270_GPIO_GREEN;
+ }
+ platform_device_register(&cmx2xx_led_device);
+}
+#else
+static inline void cmx2xx_init_leds(void) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+/*
+ Display definitions
+ keep these for backwards compatibility, although symbolic names (as
+ e.g. in lpd270.c) looks better
+*/
+#define MTYPE_STN320x240 0
+#define MTYPE_TFT640x480 1
+#define MTYPE_CRT640x480 2
+#define MTYPE_CRT800x600 3
+#define MTYPE_TFT320x240 6
+#define MTYPE_STN640x480 7
+
+static struct pxafb_mode_info generic_stn_320x240_mode = {
+ .pixclock = 76923,
+ .bpp = 8,
+ .xres = 320,
+ .yres = 240,
+ .hsync_len = 3,
+ .vsync_len = 2,
+ .left_margin = 3,
+ .upper_margin = 0,
+ .right_margin = 3,
+ .lower_margin = 0,
+ .sync = (FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT),
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_stn_320x240 = {
+ .modes = &generic_stn_320x240_mode,
+ .num_modes = 1,
+ .lccr0 = 0,
+ .lccr3 = (LCCR3_PixClkDiv(0x03) |
+ LCCR3_Acb(0xff) |
+ LCCR3_PCP),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+};
+
+static struct pxafb_mode_info generic_tft_640x480_mode = {
+ .pixclock = 38461,
+ .bpp = 8,
+ .xres = 640,
+ .yres = 480,
+ .hsync_len = 60,
+ .vsync_len = 2,
+ .left_margin = 70,
+ .upper_margin = 10,
+ .right_margin = 70,
+ .lower_margin = 5,
+ .sync = 0,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_tft_640x480 = {
+ .modes = &generic_tft_640x480_mode,
+ .num_modes = 1,
+ .lccr0 = (LCCR0_PAS),
+ .lccr3 = (LCCR3_PixClkDiv(0x01) |
+ LCCR3_Acb(0xff) |
+ LCCR3_PCP),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+};
+
+static struct pxafb_mode_info generic_crt_640x480_mode = {
+ .pixclock = 38461,
+ .bpp = 8,
+ .xres = 640,
+ .yres = 480,
+ .hsync_len = 63,
+ .vsync_len = 2,
+ .left_margin = 81,
+ .upper_margin = 33,
+ .right_margin = 16,
+ .lower_margin = 10,
+ .sync = (FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT),
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_crt_640x480 = {
+ .modes = &generic_crt_640x480_mode,
+ .num_modes = 1,
+ .lccr0 = (LCCR0_PAS),
+ .lccr3 = (LCCR3_PixClkDiv(0x01) |
+ LCCR3_Acb(0xff)),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+};
+
+static struct pxafb_mode_info generic_crt_800x600_mode = {
+ .pixclock = 28846,
+ .bpp = 8,
+ .xres = 800,
+ .yres = 600,
+ .hsync_len = 63,
+ .vsync_len = 2,
+ .left_margin = 26,
+ .upper_margin = 21,
+ .right_margin = 26,
+ .lower_margin = 11,
+ .sync = (FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT),
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_crt_800x600 = {
+ .modes = &generic_crt_800x600_mode,
+ .num_modes = 1,
+ .lccr0 = (LCCR0_PAS),
+ .lccr3 = (LCCR3_PixClkDiv(0x02) |
+ LCCR3_Acb(0xff)),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+};
+
+static struct pxafb_mode_info generic_tft_320x240_mode = {
+ .pixclock = 134615,
+ .bpp = 16,
+ .xres = 320,
+ .yres = 240,
+ .hsync_len = 63,
+ .vsync_len = 7,
+ .left_margin = 75,
+ .upper_margin = 0,
+ .right_margin = 15,
+ .lower_margin = 15,
+ .sync = 0,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_tft_320x240 = {
+ .modes = &generic_tft_320x240_mode,
+ .num_modes = 1,
+ .lccr0 = (LCCR0_PAS),
+ .lccr3 = (LCCR3_PixClkDiv(0x06) |
+ LCCR3_Acb(0xff) |
+ LCCR3_PCP),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+};
+
+static struct pxafb_mode_info generic_stn_640x480_mode = {
+ .pixclock = 57692,
+ .bpp = 8,
+ .xres = 640,
+ .yres = 480,
+ .hsync_len = 4,
+ .vsync_len = 2,
+ .left_margin = 10,
+ .upper_margin = 5,
+ .right_margin = 10,
+ .lower_margin = 5,
+ .sync = (FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT),
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_stn_640x480 = {
+ .modes = &generic_stn_640x480_mode,
+ .num_modes = 1,
+ .lccr0 = 0,
+ .lccr3 = (LCCR3_PixClkDiv(0x02) |
+ LCCR3_Acb(0xff)),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+};
+
+static struct pxafb_mach_info *cmx2xx_display = &generic_crt_640x480;
+
+static int __init cmx2xx_set_display(char *str)
+{
+ int disp_type = simple_strtol(str, NULL, 0);
+ switch (disp_type) {
+ case MTYPE_STN320x240:
+ cmx2xx_display = &generic_stn_320x240;
+ break;
+ case MTYPE_TFT640x480:
+ cmx2xx_display = &generic_tft_640x480;
+ break;
+ case MTYPE_CRT640x480:
+ cmx2xx_display = &generic_crt_640x480;
+ break;
+ case MTYPE_CRT800x600:
+ cmx2xx_display = &generic_crt_800x600;
+ break;
+ case MTYPE_TFT320x240:
+ cmx2xx_display = &generic_tft_320x240;
+ break;
+ case MTYPE_STN640x480:
+ cmx2xx_display = &generic_stn_640x480;
+ break;
+ default: /* fallback to CRT 640x480 */
+ cmx2xx_display = &generic_crt_640x480;
+ break;
+ }
+ return 1;
+}
+
+/*
+ This should be done really early to get proper configuration for
+ frame buffer.
+ Indeed, pxafb parameters can be used istead, but CM-X2XX bootloader
+ has limitied line length for kernel command line, and also it will
+ break compatibitlty with proprietary releases already in field.
+*/
+__setup("monitor=", cmx2xx_set_display);
+
+static void __init cmx2xx_init_display(void)
+{
+ set_pxa_fb_info(cmx2xx_display);
+}
+#else
+static inline void cmx2xx_init_display(void) {}
+#endif
+
+#ifdef CONFIG_PM
+static unsigned long sleep_save_msc[10];
+
+static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state)
+{
+ cmx2xx_pci_suspend();
+
+ /* save MSC registers */
+ sleep_save_msc[0] = MSC0;
+ sleep_save_msc[1] = MSC1;
+ sleep_save_msc[2] = MSC2;
+
+ /* setup power saving mode registers */
+ PCFR = 0x0;
+ PSLR = 0xff400000;
+ PMCR = 0x00000005;
+ PWER = 0x80000000;
+ PFER = 0x00000000;
+ PRER = 0x00000000;
+ PGSR0 = 0xC0018800;
+ PGSR1 = 0x004F0002;
+ PGSR2 = 0x6021C000;
+ PGSR3 = 0x00020000;
+
+ return 0;
+}
+
+static int cmx2xx_resume(struct sys_device *dev)
+{
+ cmx2xx_pci_resume();
+
+ /* restore MSC registers */
+ MSC0 = sleep_save_msc[0];
+ MSC1 = sleep_save_msc[1];
+ MSC2 = sleep_save_msc[2];
+
+ return 0;
+}
+
+static struct sysdev_class cmx2xx_pm_sysclass = {
+ .name = "pm",
+ .resume = cmx2xx_resume,
+ .suspend = cmx2xx_suspend,
+};
+
+static struct sys_device cmx2xx_pm_device = {
+ .cls = &cmx2xx_pm_sysclass,
+};
+
+static int __init cmx2xx_pm_init(void)
+{
+ int error;
+ error = sysdev_class_register(&cmx2xx_pm_sysclass);
+ if (error == 0)
+ error = sysdev_register(&cmx2xx_pm_device);
+ return error;
+}
+#else
+static int __init cmx2xx_pm_init(void) { return 0; }
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init cmx2xx_init_ac97(void)
+{
+ pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cmx2xx_init_ac97(void) {}
+#endif
+
+static void __init cmx2xx_init(void)
+{
+ cmx2xx_pm_init();
+
+ if (cpu_is_pxa25x())
+ cmx255_init();
+ else
+ cmx270_init();
+
+ cmx2xx_init_dm9000();
+ cmx2xx_init_display();
+ cmx2xx_init_ac97();
+ cmx2xx_init_touchscreen();
+ cmx2xx_init_leds();
+}
+
+static void __init cmx2xx_init_irq(void)
+{
+ pxa27x_init_irq();
+
+ if (cpu_is_pxa25x()) {
+ pxa25x_init_irq();
+ cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ);
+ } else {
+ pxa27x_init_irq();
+ cmx2xx_pci_init_irq(CMX270_GPIO_IT8152_IRQ);
+ }
+}
+
+#ifdef CONFIG_PCI
+/* Map PCI companion statically */
+static struct map_desc cmx2xx_io_desc[] __initdata = {
+ [0] = { /* PCI bridge */
+ .virtual = CMX2XX_IT8152_VIRT,
+ .pfn = __phys_to_pfn(PXA_CS4_PHYS),
+ .length = SZ_64M,
+ .type = MT_DEVICE
+ },
+};
+
+static void __init cmx2xx_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(cmx2xx_io_desc, ARRAY_SIZE(cmx2xx_io_desc));
+
+ it8152_base_address = CMX2XX_IT8152_VIRT;
+}
+#else
+static void __init cmx2xx_map_io(void)
+{
+ pxa_map_io();
+}
+#endif
+
+MACHINE_START(ARMCORE, "Compulab CM-X2XX")
+ .boot_params = 0xa0000100,
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = cmx2xx_map_io,
+ .init_irq = cmx2xx_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = cmx2xx_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
new file mode 100644
index 000000000000..deb46cd144bf
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -0,0 +1,465 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x300.c
+ *
+ * Support for the CompuLab CM-X300 modules
+ *
+ * Copyright (C) 2008 CompuLab Ltd.
+ *
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/gpio.h>
+#include <linux/dm9000.h>
+#include <linux/leds.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/mfp-pxa300.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/i2c.h>
+#include <mach/pxa3xx_nand.h>
+
+#include <asm/mach/map.h>
+
+#include "generic.h"
+
+#define CM_X300_ETH_PHYS 0x08000010
+
+#define GPIO82_MMC2_IRQ (82)
+#define GPIO85_MMC2_WP (85)
+
+#define CM_X300_MMC2_IRQ IRQ_GPIO(GPIO82_MMC2_IRQ)
+
+static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
+ /* LCD */
+ GPIO54_LCD_LDD_0,
+ GPIO55_LCD_LDD_1,
+ GPIO56_LCD_LDD_2,
+ GPIO57_LCD_LDD_3,
+ GPIO58_LCD_LDD_4,
+ GPIO59_LCD_LDD_5,
+ GPIO60_LCD_LDD_6,
+ GPIO61_LCD_LDD_7,
+ GPIO62_LCD_LDD_8,
+ GPIO63_LCD_LDD_9,
+ GPIO64_LCD_LDD_10,
+ GPIO65_LCD_LDD_11,
+ GPIO66_LCD_LDD_12,
+ GPIO67_LCD_LDD_13,
+ GPIO68_LCD_LDD_14,
+ GPIO69_LCD_LDD_15,
+ GPIO72_LCD_FCLK,
+ GPIO73_LCD_LCLK,
+ GPIO74_LCD_PCLK,
+ GPIO75_LCD_BIAS,
+
+ /* BTUART */
+ GPIO111_UART2_RTS,
+ GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
+ GPIO113_UART2_TXD,
+ GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
+
+ /* STUART */
+ GPIO109_UART3_TXD,
+ GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
+
+ /* AC97 */
+ GPIO23_AC97_nACRESET,
+ GPIO24_AC97_SYSCLK,
+ GPIO29_AC97_BITCLK,
+ GPIO25_AC97_SDATA_IN_0,
+ GPIO27_AC97_SDATA_OUT,
+ GPIO28_AC97_SYNC,
+
+ /* Keypad */
+ GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
+ GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
+ GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
+ GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
+ GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
+ GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
+ GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
+ GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
+ GPIO121_KP_MKOUT_0,
+ GPIO122_KP_MKOUT_1,
+ GPIO123_KP_MKOUT_2,
+ GPIO124_KP_MKOUT_3,
+ GPIO125_KP_MKOUT_4,
+ GPIO4_2_KP_MKOUT_5,
+
+ /* MMC1 */
+ GPIO3_MMC1_DAT0,
+ GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO5_MMC1_DAT2,
+ GPIO6_MMC1_DAT3,
+ GPIO7_MMC1_CLK,
+ GPIO8_MMC1_CMD, /* CMD0 for slot 0 */
+
+ /* MMC2 */
+ GPIO9_MMC2_DAT0,
+ GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
+ GPIO11_MMC2_DAT2,
+ GPIO12_MMC2_DAT3,
+ GPIO13_MMC2_CLK,
+ GPIO14_MMC2_CMD,
+
+ /* FFUART */
+ GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
+ GPIO31_UART1_TXD,
+ GPIO32_UART1_CTS,
+ GPIO37_UART1_RTS,
+ GPIO33_UART1_DCD,
+ GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
+ GPIO35_UART1_RI,
+ GPIO36_UART1_DTR,
+
+ /* GPIOs */
+ GPIO79_GPIO, /* LED */
+ GPIO82_GPIO | MFP_PULL_HIGH, /* MMC CD */
+ GPIO85_GPIO, /* MMC WP */
+ GPIO99_GPIO, /* Ethernet IRQ */
+};
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+ [0] = {
+ .start = CM_X300_ETH_PHYS,
+ .end = CM_X300_ETH_PHYS + 0x3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CM_X300_ETH_PHYS + 0x4,
+ .end = CM_X300_ETH_PHYS + 0x4 + 500,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
+ .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ }
+};
+
+static struct dm9000_plat_data cm_x300_dm9000_platdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device dm9000_device = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dm9000_resources),
+ .resource = dm9000_resources,
+ .dev = {
+ .platform_data = &cm_x300_dm9000_platdata,
+ }
+
+};
+
+static void __init cm_x300_init_dm9000(void)
+{
+ platform_device_register(&dm9000_device);
+}
+#else
+static inline void cm_x300_init_dm9000(void) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info cm_x300_lcd_modes[] = {
+ [0] = {
+ .pixclock = 38000,
+ .bpp = 16,
+ .xres = 480,
+ .yres = 640,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .left_margin = 8,
+ .upper_margin = 0,
+ .right_margin = 24,
+ .lower_margin = 4,
+ .cmap_greyscale = 0,
+ },
+ [1] = {
+ .pixclock = 153800,
+ .bpp = 16,
+ .xres = 240,
+ .yres = 320,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .left_margin = 8,
+ .upper_margin = 2,
+ .right_margin = 88,
+ .lower_margin = 2,
+ .cmap_greyscale = 0,
+ },
+};
+
+static struct pxafb_mach_info cm_x300_lcd = {
+ .modes = cm_x300_lcd_modes,
+ .num_modes = 2,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init cm_x300_init_lcd(void)
+{
+ set_pxa_fb_info(&cm_x300_lcd);
+}
+#else
+static inline void cm_x300_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition cm_x300_nand_partitions[] = {
+ [0] = {
+ .name = "OBM",
+ .offset = 0,
+ .size = SZ_256K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ [1] = {
+ .name = "U-Boot",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ [2] = {
+ .name = "Environment",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K,
+ },
+ [3] = {
+ .name = "reserved",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K + SZ_1M,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ [4] = {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ },
+ [5] = {
+ .name = "fs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
+ .enable_arbiter = 1,
+ .parts = cm_x300_nand_partitions,
+ .nr_parts = ARRAY_SIZE(cm_x300_nand_partitions),
+};
+
+static void __init cm_x300_init_nand(void)
+{
+ pxa3xx_set_nand_info(&cm_x300_nand_info);
+}
+#else
+static inline void cm_x300_init_nand(void) {}
+#endif
+
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
+/* The first MMC slot of CM-X300 is hardwired to Libertas card and has
+ no detection/ro pins */
+static int cm_x300_mci_init(struct device *dev,
+ irq_handler_t cm_x300_detect_int,
+ void *data)
+{
+ return 0;
+}
+
+static void cm_x300_mci_exit(struct device *dev, void *data)
+{
+}
+
+static struct pxamci_platform_data cm_x300_mci_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = cm_x300_mci_init,
+ .exit = cm_x300_mci_exit,
+};
+
+static int cm_x300_mci2_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO85_MMC2_WP);
+}
+
+static int cm_x300_mci2_init(struct device *dev,
+ irq_handler_t cm_x300_detect_int,
+ void *data)
+{
+ int err;
+
+ /*
+ * setup GPIO for CM-X300 MMC controller
+ */
+ err = gpio_request(GPIO82_MMC2_IRQ, "mmc card detect");
+ if (err)
+ goto err_request_cd;
+ gpio_direction_input(GPIO82_MMC2_IRQ);
+
+ err = gpio_request(GPIO85_MMC2_WP, "mmc write protect");
+ if (err)
+ goto err_request_wp;
+ gpio_direction_input(GPIO85_MMC2_WP);
+
+ err = request_irq(CM_X300_MMC2_IRQ, cm_x300_detect_int,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: MMC/SD/SDIO: "
+ "can't request card detect IRQ\n", __func__);
+ goto err_request_irq;
+ }
+
+ return 0;
+
+err_request_irq:
+ gpio_free(GPIO85_MMC2_WP);
+err_request_wp:
+ gpio_free(GPIO82_MMC2_IRQ);
+err_request_cd:
+ return err;
+}
+
+static void cm_x300_mci2_exit(struct device *dev, void *data)
+{
+ free_irq(CM_X300_MMC2_IRQ, data);
+ gpio_free(GPIO82_MMC2_IRQ);
+ gpio_free(GPIO85_MMC2_WP);
+}
+
+static struct pxamci_platform_data cm_x300_mci2_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = cm_x300_mci2_init,
+ .exit = cm_x300_mci2_exit,
+ .get_ro = cm_x300_mci2_ro,
+};
+
+static void __init cm_x300_init_mmc(void)
+{
+ pxa_set_mci_info(&cm_x300_mci_platform_data);
+ pxa3xx_set_mci2_info(&cm_x300_mci2_platform_data);
+}
+#else
+static inline void cm_x300_init_mmc(void) {}
+#endif
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
+};
+
+static void __init cm_x300_init_ohci(void)
+{
+ pxa_set_ohci_info(&cm_x300_ohci_platform_data);
+}
+#else
+static inline void cm_x300_init_ohci(void) {}
+#endif
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cm_x300_leds[] = {
+ [0] = {
+ .name = "cm-x300:green",
+ .default_trigger = "heartbeat",
+ .gpio = 79,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data cm_x300_gpio_led_pdata = {
+ .num_leds = ARRAY_SIZE(cm_x300_leds),
+ .leds = cm_x300_leds,
+};
+
+static struct platform_device cm_x300_led_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &cm_x300_gpio_led_pdata,
+ },
+};
+
+static void __init cm_x300_init_leds(void)
+{
+ platform_device_register(&cm_x300_led_device);
+}
+#else
+static inline void cm_x300_init_leds(void) {}
+#endif
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+/* PCA9555 */
+static struct pca953x_platform_data cm_x300_gpio_ext_pdata_0 = {
+ .gpio_base = 128,
+};
+
+static struct pca953x_platform_data cm_x300_gpio_ext_pdata_1 = {
+ .gpio_base = 144,
+};
+
+static struct i2c_board_info cm_x300_gpio_ext_info[] = {
+ [0] = {
+ I2C_BOARD_INFO("pca9555", 0x24),
+ .platform_data = &cm_x300_gpio_ext_pdata_0,
+ },
+ [1] = {
+ I2C_BOARD_INFO("pca9555", 0x25),
+ .platform_data = &cm_x300_gpio_ext_pdata_1,
+ },
+};
+
+static void __init cm_x300_init_i2c(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, cm_x300_gpio_ext_info,
+ ARRAY_SIZE(cm_x300_gpio_ext_info));
+}
+#else
+static inline void cm_x300_init_i2c(void) {}
+#endif
+
+static void __init cm_x300_init(void)
+{
+ /* board-processor specific GPIO initialization */
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_mfp_cfg));
+
+ cm_x300_init_dm9000();
+ cm_x300_init_lcd();
+ cm_x300_init_ohci();
+ cm_x300_init_mmc();
+ cm_x300_init_nand();
+ cm_x300_init_leds();
+ cm_x300_init_i2c();
+}
+
+MACHINE_START(CM_X300, "CM-X300 module")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa3xx_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = cm_x300_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index abce13c846c5..e8473624427e 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -29,12 +29,17 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
#include <mach/colibri.h>
#include "generic.h"
#include "devices.h"
+static unsigned long colibri_pin_config[] __initdata = {
+ GPIO78_nCS_2, /* Ethernet CS */
+ GPIO114_GPIO, /* Ethernet IRQ */
+};
+
/*
* Flash
*/
@@ -116,9 +121,7 @@ static struct platform_device *colibri_devices[] __initdata = {
static void __init colibri_init(void)
{
- /* DM9000 LAN */
- pxa_gpio_mode(GPIO78_nCS_2_MD);
- pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pin_config));
platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
}
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 4cbf08bd546b..65558d6aa220 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -20,8 +20,12 @@
#include <linux/interrupt.h>
#include <linux/mmc/host.h>
#include <linux/pm.h>
+#include <linux/gpio.h>
#include <linux/backlight.h>
#include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/corgi_lcd.h>
#include <video/w100fb.h>
#include <asm/setup.h>
@@ -37,11 +41,12 @@
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa25x.h>
#include <mach/i2c.h>
#include <mach/irda.h>
#include <mach/mmc.h>
#include <mach/udc.h>
+#include <mach/pxa2xx_spi.h>
#include <mach/corgi.h>
#include <mach/sharpsl.h>
@@ -52,6 +57,61 @@
#include "devices.h"
#include "sharpsl.h"
+static unsigned long corgi_pin_config[] __initdata = {
+ /* Static Memory I/O */
+ GPIO78_nCS_2, /* w100fb */
+ GPIO80_nCS_4, /* scoop */
+
+ /* SSP1 */
+ GPIO23_SSP1_SCLK,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+ GPIO24_GPIO, /* CORGI_GPIO_ADS7846_CS - SFRM as chip select */
+
+ /* I2S */
+ GPIO28_I2S_BITCLK_OUT,
+ GPIO29_I2S_SDATA_IN,
+ GPIO30_I2S_SDATA_OUT,
+ GPIO31_I2S_SYNC,
+ GPIO32_I2S_SYSCLK,
+
+ /* Infra-Red */
+ GPIO47_FICP_TXD,
+ GPIO46_FICP_RXD,
+
+ /* FFUART */
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+ GPIO39_FFUART_TXD,
+ GPIO37_FFUART_DSR,
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+
+ /* GPIO */
+ GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */
+ GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */
+ GPIO33_GPIO, /* CORGI_GPIO_SD_PWR */
+ GPIO22_GPIO, /* CORGI_GPIO_IR_ON */
+ GPIO44_GPIO, /* CORGI_GPIO_HSYNC */
+
+ GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+};
/*
* Corgi SCOOP Device
@@ -67,6 +127,7 @@ static struct resource corgi_scoop_resources[] = {
static struct scoop_config corgi_scoop_setup = {
.io_dir = CORGI_SCOOP_IO_DIR,
.io_out = CORGI_SCOOP_IO_OUT,
+ .gpio_base = CORGI_SCOOP_GPIO_BASE,
};
struct platform_device corgiscoop_device = {
@@ -79,27 +140,6 @@ struct platform_device corgiscoop_device = {
.resource = corgi_scoop_resources,
};
-static void corgi_pcmcia_init(void)
-{
- /* Setup default state of GPIO outputs
- before we enable them as outputs. */
- GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
- GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
- GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
- GPIO_bit(GPIO53_nPCE_2);
-
- pxa_gpio_mode(GPIO48_nPOE_MD);
- pxa_gpio_mode(GPIO49_nPWE_MD);
- pxa_gpio_mode(GPIO50_nPIOR_MD);
- pxa_gpio_mode(GPIO51_nPIOW_MD);
- pxa_gpio_mode(GPIO55_nPREG_MD);
- pxa_gpio_mode(GPIO56_nPWAIT_MD);
- pxa_gpio_mode(GPIO57_nIOIS16_MD);
- pxa_gpio_mode(GPIO52_nPCE_1_MD);
- pxa_gpio_mode(GPIO53_nPCE_2_MD);
- pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-}
-
static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
{
.dev = &corgiscoop_device.dev,
@@ -112,58 +152,10 @@ static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
static struct scoop_pcmcia_config corgi_pcmcia_config = {
.devs = &corgi_pcmcia_scoop[0],
.num_devs = 1,
- .pcmcia_init = corgi_pcmcia_init,
};
EXPORT_SYMBOL(corgiscoop_device);
-
-/*
- * Corgi SSP Device
- *
- * Set the parent as the scoop device because a lot of SSP devices
- * also use scoop functions and this makes the power up/down order
- * work correctly.
- */
-struct platform_device corgissp_device = {
- .name = "corgi-ssp",
- .dev = {
- .parent = &corgiscoop_device.dev,
- },
- .id = -1,
-};
-
-struct corgissp_machinfo corgi_ssp_machinfo = {
- .port = 1,
- .cs_lcdcon = CORGI_GPIO_LCDCON_CS,
- .cs_ads7846 = CORGI_GPIO_ADS7846_CS,
- .cs_max1111 = CORGI_GPIO_MAX1111_CS,
- .clk_lcdcon = 76,
- .clk_ads7846 = 2,
- .clk_max1111 = 8,
-};
-
-
-/*
- * LCD/Framebuffer
- */
-static void w100_lcdtg_suspend(struct w100fb_par *par)
-{
- corgi_lcdtg_suspend();
-}
-
-static void w100_lcdtg_init(struct w100fb_par *par)
-{
- corgi_lcdtg_hw_init(par->xres);
-}
-
-
-static struct w100_tg_info corgi_lcdtg_info = {
- .change = w100_lcdtg_init,
- .suspend = w100_lcdtg_suspend,
- .resume = w100_lcdtg_init,
-};
-
static struct w100_mem_info corgi_fb_mem = {
.ext_cntl = 0x00040003,
.sdram_mode_reg = 0x00650021,
@@ -242,7 +234,6 @@ static struct w100_mode corgi_fb_modes[] = {
};
static struct w100fb_mach_info corgi_fb_info = {
- .tg = &corgi_lcdtg_info,
.init_mode = INIT_MODE_ROTATED,
.mem = &corgi_fb_mem,
.regs = &corgi_fb_regs,
@@ -268,60 +259,10 @@ static struct platform_device corgifb_device = {
.resource = corgi_fb_resources,
.dev = {
.platform_data = &corgi_fb_info,
- .parent = &corgissp_device.dev,
},
};
-
-/*
- * Corgi Backlight Device
- */
-static void corgi_bl_kick_battery(void)
-{
- void (*kick_batt)(void);
-
- kick_batt = symbol_get(sharpsl_battery_kick);
- if (kick_batt) {
- kick_batt();
- symbol_put(sharpsl_battery_kick);
- }
-}
-
-static void corgi_bl_set_intensity(int intensity)
-{
- if (intensity > 0x10)
- intensity += 0x10;
-
- /* Bits 0-4 are accessed via the SSP interface */
- corgi_ssp_blduty_set(intensity & 0x1f);
-
- /* Bit 5 is via SCOOP */
- if (intensity & 0x0020)
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
- else
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
-}
-
-static struct generic_bl_info corgi_bl_machinfo = {
- .name = "corgi-bl",
- .max_intensity = 0x2f,
- .default_intensity = 0x1f,
- .limit_mask = 0x0b,
- .set_bl_intensity = corgi_bl_set_intensity,
- .kick_battery = corgi_bl_kick_battery,
-};
-
-static struct platform_device corgibl_device = {
- .name = "generic-bl",
- .dev = {
- .parent = &corgifb_device.dev,
- .platform_data = &corgi_bl_machinfo,
- },
- .id = -1,
-};
-
-
/*
* Corgi Keyboard Device
*/
@@ -330,75 +271,35 @@ static struct platform_device corgikbd_device = {
.id = -1,
};
-
/*
* Corgi LEDs
*/
-static struct platform_device corgiled_device = {
- .name = "corgi-led",
- .id = -1,
-};
-
-
-/*
- * Corgi Touch Screen Device
- */
-static unsigned long (*get_hsync_invperiod)(struct device *dev);
-
-static void inline sharpsl_wait_sync(int gpio)
-{
- while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
- while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
-}
-
-static unsigned long corgi_get_hsync_invperiod(void)
-{
- if (!get_hsync_invperiod)
- get_hsync_invperiod = symbol_get(w100fb_get_hsynclen);
- if (!get_hsync_invperiod)
- return 0;
-
- return get_hsync_invperiod(&corgifb_device.dev);
-}
-
-static void corgi_put_hsync(void)
-{
- if (get_hsync_invperiod)
- symbol_put(w100fb_get_hsynclen);
- get_hsync_invperiod = NULL;
-}
-
-static void corgi_wait_hsync(void)
-{
- sharpsl_wait_sync(CORGI_GPIO_HSYNC);
-}
-
-static struct resource corgits_resources[] = {
- [0] = {
- .start = CORGI_IRQ_GPIO_TP_INT,
- .end = CORGI_IRQ_GPIO_TP_INT,
- .flags = IORESOURCE_IRQ,
+static struct gpio_led corgi_gpio_leds[] = {
+ {
+ .name = "corgi:amber:charge",
+ .default_trigger = "sharpsl-charge",
+ .gpio = CORGI_GPIO_LED_ORANGE,
+ },
+ {
+ .name = "corgi:green:mail",
+ .default_trigger = "nand-disk",
+ .gpio = CORGI_GPIO_LED_GREEN,
},
};
-static struct corgits_machinfo corgi_ts_machinfo = {
- .get_hsync_invperiod = corgi_get_hsync_invperiod,
- .put_hsync = corgi_put_hsync,
- .wait_hsync = corgi_wait_hsync,
+static struct gpio_led_platform_data corgi_gpio_leds_info = {
+ .leds = corgi_gpio_leds,
+ .num_leds = ARRAY_SIZE(corgi_gpio_leds),
};
-static struct platform_device corgits_device = {
- .name = "corgi-ts",
+static struct platform_device corgiled_device = {
+ .name = "leds-gpio",
+ .id = -1,
.dev = {
- .parent = &corgissp_device.dev,
- .platform_data = &corgi_ts_machinfo,
+ .platform_data = &corgi_gpio_leds_info,
},
- .id = -1,
- .num_resources = ARRAY_SIZE(corgits_resources),
- .resource = corgits_resources,
};
-
/*
* MMC/SD Device
*
@@ -411,20 +312,42 @@ static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, vo
{
int err;
- /* setup GPIO for PXA25x MMC controller */
- pxa_gpio_mode(GPIO6_MMCCLK_MD);
- pxa_gpio_mode(GPIO8_MMCCS0_MD);
- pxa_gpio_mode(CORGI_GPIO_nSD_DETECT | GPIO_IN);
- pxa_gpio_mode(CORGI_GPIO_SD_PWR | GPIO_OUT);
+ err = gpio_request(CORGI_GPIO_nSD_DETECT, "nSD_DETECT");
+ if (err)
+ goto err_out;
- corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+ err = gpio_request(CORGI_GPIO_nSD_WP, "nSD_WP");
+ if (err)
+ goto err_free_1;
- err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
+ err = gpio_request(CORGI_GPIO_SD_PWR, "SD_PWR");
if (err)
- printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+ goto err_free_2;
+ gpio_direction_input(CORGI_GPIO_nSD_DETECT);
+ gpio_direction_input(CORGI_GPIO_nSD_WP);
+ gpio_direction_output(CORGI_GPIO_SD_PWR, 0);
+
+ corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+
+ err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING,
+ "MMC card detect", data);
+ if (err) {
+ pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
+ __func__);
+ goto err_free_3;
+ }
+ return 0;
+
+err_free_3:
+ gpio_free(CORGI_GPIO_SD_PWR);
+err_free_2:
+ gpio_free(CORGI_GPIO_nSD_WP);
+err_free_1:
+ gpio_free(CORGI_GPIO_nSD_DETECT);
+err_out:
return err;
}
@@ -432,20 +355,20 @@ static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
- if (( 1 << vdd) & p_d->ocr_mask)
- GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
- else
- GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
+ gpio_set_value(CORGI_GPIO_SD_PWR, ((1 << vdd) & p_d->ocr_mask));
}
static int corgi_mci_get_ro(struct device *dev)
{
- return GPLR(CORGI_GPIO_nSD_WP) & GPIO_bit(CORGI_GPIO_nSD_WP);
+ return gpio_get_value(CORGI_GPIO_nSD_WP);
}
static void corgi_mci_exit(struct device *dev, void *data)
{
free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
+ gpio_free(CORGI_GPIO_SD_PWR);
+ gpio_free(CORGI_GPIO_nSD_WP);
+ gpio_free(CORGI_GPIO_nSD_DETECT);
}
static struct pxamci_platform_data corgi_mci_platform_data = {
@@ -462,16 +385,32 @@ static struct pxamci_platform_data corgi_mci_platform_data = {
*/
static void corgi_irda_transceiver_mode(struct device *dev, int mode)
{
- if (mode & IR_OFF)
- GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
- else
- GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+ gpio_set_value(CORGI_GPIO_IR_ON, mode & IR_OFF);
pxa2xx_transceiver_mode(dev, mode);
}
+static int corgi_irda_startup(struct device *dev)
+{
+ int err;
+
+ err = gpio_request(CORGI_GPIO_IR_ON, "IR_ON");
+ if (err)
+ return err;
+
+ gpio_direction_output(CORGI_GPIO_IR_ON, 1);
+ return 0;
+}
+
+static void corgi_irda_shutdown(struct device *dev)
+{
+ gpio_free(CORGI_GPIO_IR_ON);
+}
+
static struct pxaficp_platform_data corgi_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = corgi_irda_transceiver_mode,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = corgi_irda_transceiver_mode,
+ .startup = corgi_irda_startup,
+ .shutdown = corgi_irda_shutdown,
};
@@ -483,14 +422,129 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
.gpio_pullup = CORGI_GPIO_USB_PULLUP,
};
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MASTER)
+static struct pxa2xx_spi_master corgi_spi_info = {
+ .num_chipselect = 3,
+};
+
+static struct ads7846_platform_data corgi_ads7846_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100,
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .gpio_pendown = CORGI_GPIO_TP_INT,
+};
+
+static void corgi_ads7846_cs(u32 command)
+{
+ gpio_set_value(CORGI_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_ads7846_chip = {
+ .cs_control = corgi_ads7846_cs,
+};
+
+static void corgi_bl_kick_battery(void)
+{
+ void (*kick_batt)(void);
+
+ kick_batt = symbol_get(sharpsl_battery_kick);
+ if (kick_batt) {
+ kick_batt();
+ symbol_put(sharpsl_battery_kick);
+ }
+}
+
+static struct corgi_lcd_platform_data corgi_lcdcon_info = {
+ .init_mode = CORGI_LCD_MODE_VGA,
+ .max_intensity = 0x2f,
+ .default_intensity = 0x1f,
+ .limit_mask = 0x0b,
+ .gpio_backlight_cont = CORGI_GPIO_BACKLIGHT_CONT,
+ .gpio_backlight_on = -1,
+ .kick_battery = corgi_bl_kick_battery,
+};
+
+static void corgi_lcdcon_cs(u32 command)
+{
+ gpio_set_value(CORGI_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
+ .cs_control = corgi_lcdcon_cs,
+};
+
+static void corgi_max1111_cs(u32 command)
+{
+ gpio_set_value(CORGI_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_max1111_chip = {
+ .cs_control = corgi_max1111_cs,
+};
+
+static struct spi_board_info corgi_spi_devices[] = {
+ {
+ .modalias = "ads7846",
+ .max_speed_hz = 1200000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .platform_data = &corgi_ads7846_info,
+ .controller_data= &corgi_ads7846_chip,
+ .irq = gpio_to_irq(CORGI_GPIO_TP_INT),
+ }, {
+ .modalias = "corgi-lcd",
+ .max_speed_hz = 50000,
+ .bus_num = 1,
+ .chip_select = 1,
+ .platform_data = &corgi_lcdcon_info,
+ .controller_data= &corgi_lcdcon_chip,
+ }, {
+ .modalias = "max1111",
+ .max_speed_hz = 450000,
+ .bus_num = 1,
+ .chip_select = 2,
+ .controller_data= &corgi_max1111_chip,
+ },
+};
+
+static void __init corgi_init_spi(void)
+{
+ int err;
+
+ err = gpio_request(CORGI_GPIO_ADS7846_CS, "ADS7846_CS");
+ if (err)
+ return;
+
+ err = gpio_request(CORGI_GPIO_LCDCON_CS, "LCDCON_CS");
+ if (err)
+ goto err_free_1;
+
+ err = gpio_request(CORGI_GPIO_MAX1111_CS, "MAX1111_CS");
+ if (err)
+ goto err_free_2;
+
+ gpio_direction_output(CORGI_GPIO_ADS7846_CS, 1);
+ gpio_direction_output(CORGI_GPIO_LCDCON_CS, 1);
+ gpio_direction_output(CORGI_GPIO_MAX1111_CS, 1);
+
+ pxa2xx_set_spi_info(1, &corgi_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
+ return;
+
+err_free_2:
+ gpio_free(CORGI_GPIO_LCDCON_CS);
+err_free_1:
+ gpio_free(CORGI_GPIO_ADS7846_CS);
+}
+#else
+static inline void corgi_init_spi(void) {}
+#endif
static struct platform_device *devices[] __initdata = {
&corgiscoop_device,
- &corgissp_device,
&corgifb_device,
&corgikbd_device,
- &corgibl_device,
- &corgits_device,
&corgiled_device,
};
@@ -498,7 +552,8 @@ static void corgi_poweroff(void)
{
if (!machine_is_corgi())
/* Green LED off tells the bootloader to halt */
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+ gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
+
arm_machine_restart('h');
}
@@ -506,7 +561,8 @@ static void corgi_restart(char mode)
{
if (!machine_is_corgi())
/* Green LED on tells the bootloader to reboot */
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+ gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
+
arm_machine_restart('h');
}
@@ -515,20 +571,12 @@ static void __init corgi_init(void)
pm_power_off = corgi_poweroff;
arm_pm_restart = corgi_restart;
- /* setup sleep mode values */
- PWER = 0x00000002;
- PFER = 0x00000000;
- PRER = 0x00000002;
- PGSR0 = 0x0158C000;
- PGSR1 = 0x00FF0080;
- PGSR2 = 0x0001C004;
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
PCFR |= PCFR_OPDE;
- corgi_ssp_set_machinfo(&corgi_ssp_machinfo);
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
- pxa_gpio_mode(CORGI_GPIO_IR_ON | GPIO_OUT);
- pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN);
+ corgi_init_spi();
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&corgi_mci_platform_data);
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
deleted file mode 100644
index 311baf149b07..000000000000
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/corgi_lcd.c
- *
- * Corgi/Spitz LCD Specific Code
- *
- * Copyright (C) 2005 Richard Purdie
- *
- * Connectivity:
- * Corgi - LCD to ATI Imageon w100 (Wallaby)
- * Spitz - LCD to PXA Framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <mach/akita.h>
-#include <mach/corgi.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/sharpsl.h>
-#include <mach/spitz.h>
-#include <asm/hardware/scoop.h>
-#include <asm/mach/sharpsl_param.h>
-#include "generic.h"
-
-/* Register Addresses */
-#define RESCTL_ADRS 0x00
-#define PHACTRL_ADRS 0x01
-#define DUTYCTRL_ADRS 0x02
-#define POWERREG0_ADRS 0x03
-#define POWERREG1_ADRS 0x04
-#define GPOR3_ADRS 0x05
-#define PICTRL_ADRS 0x06
-#define POLCTRL_ADRS 0x07
-
-/* Register Bit Definitions */
-#define RESCTL_QVGA 0x01
-#define RESCTL_VGA 0x00
-
-#define POWER1_VW_ON 0x01 /* VW Supply FET ON */
-#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */
-#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */
-
-#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */
-#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */
-#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */
-
-#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */
-#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */
-#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */
-#define POWER0_COM_ON 0x08 /* COM Power Supply ON */
-#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */
-
-#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */
-#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */
-#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */
-
-#define PICTRL_INIT_STATE 0x01
-#define PICTRL_INIOFF 0x02
-#define PICTRL_POWER_DOWN 0x04
-#define PICTRL_COM_SIGNAL_OFF 0x08
-#define PICTRL_DAC_SIGNAL_OFF 0x10
-
-#define POLCTRL_SYNC_POL_FALL 0x01
-#define POLCTRL_EN_POL_FALL 0x02
-#define POLCTRL_DATA_POL_FALL 0x04
-#define POLCTRL_SYNC_ACT_H 0x08
-#define POLCTRL_EN_ACT_L 0x10
-
-#define POLCTRL_SYNC_POL_RISE 0x00
-#define POLCTRL_EN_POL_RISE 0x00
-#define POLCTRL_DATA_POL_RISE 0x00
-#define POLCTRL_SYNC_ACT_L 0x00
-#define POLCTRL_EN_ACT_H 0x00
-
-#define PHACTRL_PHASE_MANUAL 0x01
-#define DEFAULT_PHAD_QVGA (9)
-#define DEFAULT_COMADJ (125)
-
-/*
- * This is only a psuedo I2C interface. We can't use the standard kernel
- * routines as the interface is write only. We just assume the data is acked...
- */
-static void lcdtg_ssp_i2c_send(u8 data)
-{
- corgi_ssp_lcdtg_send(POWERREG0_ADRS, data);
- udelay(10);
-}
-
-static void lcdtg_i2c_send_bit(u8 data)
-{
- lcdtg_ssp_i2c_send(data);
- lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK);
- lcdtg_ssp_i2c_send(data);
-}
-
-static void lcdtg_i2c_send_start(u8 base)
-{
- lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
- lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
- lcdtg_ssp_i2c_send(base);
-}
-
-static void lcdtg_i2c_send_stop(u8 base)
-{
- lcdtg_ssp_i2c_send(base);
- lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
- lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
-}
-
-static void lcdtg_i2c_send_byte(u8 base, u8 data)
-{
- int i;
- for (i = 0; i < 8; i++) {
- if (data & 0x80)
- lcdtg_i2c_send_bit(base | POWER0_COM_DOUT);
- else
- lcdtg_i2c_send_bit(base);
- data <<= 1;
- }
-}
-
-static void lcdtg_i2c_wait_ack(u8 base)
-{
- lcdtg_i2c_send_bit(base);
-}
-
-static void lcdtg_set_common_voltage(u8 base_data, u8 data)
-{
- /* Set Common Voltage to M62332FP via I2C */
- lcdtg_i2c_send_start(base_data);
- lcdtg_i2c_send_byte(base_data, 0x9c);
- lcdtg_i2c_wait_ack(base_data);
- lcdtg_i2c_send_byte(base_data, 0x00);
- lcdtg_i2c_wait_ack(base_data);
- lcdtg_i2c_send_byte(base_data, data);
- lcdtg_i2c_wait_ack(base_data);
- lcdtg_i2c_send_stop(base_data);
-}
-
-/* Set Phase Adjust */
-static void lcdtg_set_phadadj(int mode)
-{
- int adj;
- switch(mode) {
- case 480:
- case 640:
- /* Setting for VGA */
- adj = sharpsl_param.phadadj;
- if (adj < 0) {
- adj = PHACTRL_PHASE_MANUAL;
- } else {
- adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL;
- }
- break;
- case 240:
- case 320:
- default:
- /* Setting for QVGA */
- adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
- break;
- }
-
- corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj);
-}
-
-static int lcd_inited;
-
-void corgi_lcdtg_hw_init(int mode)
-{
- if (!lcd_inited) {
- int comadj;
-
- /* Initialize Internal Logic & Port */
- corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE
- | PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF);
-
- corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF
- | POWER0_COM_OFF | POWER0_VCC5_OFF);
-
- corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
-
- /* VDD(+8V), SVSS(-4V) ON */
- corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
- mdelay(3);
-
- /* DAC ON */
- corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
- | POWER0_COM_OFF | POWER0_VCC5_OFF);
-
- /* INIB = H, INI = L */
- /* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
- corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
-
- /* Set Common Voltage */
- comadj = sharpsl_param.comadj;
- if (comadj < 0)
- comadj = DEFAULT_COMADJ;
- lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj);
-
- /* VCC5 ON, DAC ON */
- corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
- POWER0_COM_OFF | POWER0_VCC5_ON);
-
- /* GVSS(-8V) ON, VDD ON */
- corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
- mdelay(2);
-
- /* COM SIGNAL ON (PICTL[3] = L) */
- corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE);
-
- /* COM ON, DAC ON, VCC5_ON */
- corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
- | POWER0_COM_ON | POWER0_VCC5_ON);
-
- /* VW ON, GVSS ON, VDD ON */
- corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
-
- /* Signals output enable */
- corgi_ssp_lcdtg_send(PICTRL_ADRS, 0);
-
- /* Set Phase Adjust */
- lcdtg_set_phadadj(mode);
-
- /* Initialize for Input Signals from ATI */
- corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE
- | POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H);
- udelay(1000);
-
- lcd_inited=1;
- } else {
- lcdtg_set_phadadj(mode);
- }
-
- switch(mode) {
- case 480:
- case 640:
- /* Set Lcd Resolution (VGA) */
- corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA);
- break;
- case 240:
- case 320:
- default:
- /* Set Lcd Resolution (QVGA) */
- corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA);
- break;
- }
-}
-
-void corgi_lcdtg_suspend(void)
-{
- /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
- mdelay(34);
-
- /* (1)VW OFF */
- corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
-
- /* (2)COM OFF */
- corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
- corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
-
- /* (3)Set Common Voltage Bias 0V */
- lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0);
-
- /* (4)GVSS OFF */
- corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
-
- /* (5)VCC5 OFF */
- corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
-
- /* (6)Set PDWN, INIOFF, DACOFF */
- corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
- PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
-
- /* (7)DAC OFF */
- corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
-
- /* (8)VDD OFF */
- corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
-
- lcd_inited = 0;
-}
-
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 35bbfccd2df3..eb7d6c94aa42 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -21,7 +21,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
-#include <asm/hardware/scoop.h>
#include <mach/sharpsl.h>
#include <mach/corgi.h>
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
deleted file mode 100644
index 8e2f2215c4ba..000000000000
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * SSP control code for Sharp Corgi devices
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <mach/ssp.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
-#include <mach/regs-ssp.h>
-#include "sharpsl.h"
-
-static DEFINE_SPINLOCK(corgi_ssp_lock);
-static struct ssp_dev corgi_ssp_dev;
-static struct ssp_state corgi_ssp_state;
-static struct corgissp_machinfo *ssp_machinfo;
-
-/*
- * There are three devices connected to the SSP interface:
- * 1. A touchscreen controller (TI ADS7846 compatible)
- * 2. An LCD controller (with some Backlight functionality)
- * 3. A battery monitoring IC (Maxim MAX1111)
- *
- * Each device uses a different speed/mode of communication.
- *
- * The touchscreen is very sensitive and the most frequently used
- * so the port is left configured for this.
- *
- * Devices are selected using Chip Selects on GPIOs.
- */
-
-/*
- * ADS7846 Routines
- */
-unsigned long corgi_ssp_ads7846_putget(ulong data)
-{
- unsigned long flag;
- u32 ret = 0;
-
- spin_lock_irqsave(&corgi_ssp_lock, flag);
- if (ssp_machinfo->cs_ads7846 >= 0)
- GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-
- ssp_write_word(&corgi_ssp_dev,data);
- ssp_read_word(&corgi_ssp_dev, &ret);
-
- if (ssp_machinfo->cs_ads7846 >= 0)
- GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
- spin_unlock_irqrestore(&corgi_ssp_lock, flag);
-
- return ret;
-}
-
-/*
- * NOTE: These functions should always be called in interrupt context
- * and use the _lock and _unlock functions. They are very time sensitive.
- */
-void corgi_ssp_ads7846_lock(void)
-{
- spin_lock(&corgi_ssp_lock);
- if (ssp_machinfo->cs_ads7846 >= 0)
- GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-}
-
-void corgi_ssp_ads7846_unlock(void)
-{
- if (ssp_machinfo->cs_ads7846 >= 0)
- GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
- spin_unlock(&corgi_ssp_lock);
-}
-
-void corgi_ssp_ads7846_put(ulong data)
-{
- ssp_write_word(&corgi_ssp_dev,data);
-}
-
-unsigned long corgi_ssp_ads7846_get(void)
-{
- u32 ret = 0;
- ssp_read_word(&corgi_ssp_dev, &ret);
- return ret;
-}
-
-EXPORT_SYMBOL(corgi_ssp_ads7846_putget);
-EXPORT_SYMBOL(corgi_ssp_ads7846_lock);
-EXPORT_SYMBOL(corgi_ssp_ads7846_unlock);
-EXPORT_SYMBOL(corgi_ssp_ads7846_put);
-EXPORT_SYMBOL(corgi_ssp_ads7846_get);
-
-
-/*
- * LCD/Backlight Routines
- */
-unsigned long corgi_ssp_dac_put(ulong data)
-{
- unsigned long flag, sscr1 = SSCR1_SPH;
- u32 tmp;
-
- spin_lock_irqsave(&corgi_ssp_lock, flag);
-
- if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi())
- sscr1 = 0;
-
- ssp_disable(&corgi_ssp_dev);
- ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon));
- ssp_enable(&corgi_ssp_dev);
-
- if (ssp_machinfo->cs_lcdcon >= 0)
- GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
- ssp_write_word(&corgi_ssp_dev,data);
- /* Read null data back from device to prevent SSP overflow */
- ssp_read_word(&corgi_ssp_dev, &tmp);
- if (ssp_machinfo->cs_lcdcon >= 0)
- GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
-
- ssp_disable(&corgi_ssp_dev);
- ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
- ssp_enable(&corgi_ssp_dev);
-
- spin_unlock_irqrestore(&corgi_ssp_lock, flag);
-
- return 0;
-}
-
-void corgi_ssp_lcdtg_send(u8 adrs, u8 data)
-{
- corgi_ssp_dac_put(((adrs & 0x07) << 5) | (data & 0x1f));
-}
-
-void corgi_ssp_blduty_set(int duty)
-{
- corgi_ssp_lcdtg_send(0x02,duty);
-}
-
-EXPORT_SYMBOL(corgi_ssp_lcdtg_send);
-EXPORT_SYMBOL(corgi_ssp_blduty_set);
-
-/*
- * Max1111 Routines
- */
-int corgi_ssp_max1111_get(ulong data)
-{
- unsigned long flag;
- long voltage = 0, voltage1 = 0, voltage2 = 0;
-
- spin_lock_irqsave(&corgi_ssp_lock, flag);
- if (ssp_machinfo->cs_max1111 >= 0)
- GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
- ssp_disable(&corgi_ssp_dev);
- ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111));
- ssp_enable(&corgi_ssp_dev);
-
- udelay(1);
-
- /* TB1/RB1 */
- ssp_write_word(&corgi_ssp_dev,data);
- ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */
-
- /* TB12/RB2 */
- ssp_write_word(&corgi_ssp_dev,0);
- ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1);
-
- /* TB13/RB3*/
- ssp_write_word(&corgi_ssp_dev,0);
- ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2);
-
- ssp_disable(&corgi_ssp_dev);
- ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
- ssp_enable(&corgi_ssp_dev);
- if (ssp_machinfo->cs_max1111 >= 0)
- GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
- spin_unlock_irqrestore(&corgi_ssp_lock, flag);
-
- if (voltage1 & 0xc0 || voltage2 & 0x3f)
- voltage = -1;
- else
- voltage = ((voltage1 << 2) & 0xfc) | ((voltage2 >> 6) & 0x03);
-
- return voltage;
-}
-
-EXPORT_SYMBOL(corgi_ssp_max1111_get);
-
-/*
- * Support Routines
- */
-
-void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo)
-{
- ssp_machinfo = machinfo;
-}
-
-static int __init corgi_ssp_probe(struct platform_device *dev)
-{
- int ret;
-
- /* Chip Select - Disable All */
- if (ssp_machinfo->cs_lcdcon >= 0)
- pxa_gpio_mode(ssp_machinfo->cs_lcdcon | GPIO_OUT | GPIO_DFLT_HIGH);
- if (ssp_machinfo->cs_max1111 >= 0)
- pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH);
- if (ssp_machinfo->cs_ads7846 >= 0)
- pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH);
-
- ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0);
-
- if (ret)
- printk(KERN_ERR "Unable to register SSP handler!\n");
- else {
- ssp_disable(&corgi_ssp_dev);
- ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
- ssp_enable(&corgi_ssp_dev);
- }
-
- return ret;
-}
-
-static int corgi_ssp_remove(struct platform_device *dev)
-{
- ssp_exit(&corgi_ssp_dev);
- return 0;
-}
-
-static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state)
-{
- ssp_flush(&corgi_ssp_dev);
- ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
-
- return 0;
-}
-
-static int corgi_ssp_resume(struct platform_device *dev)
-{
- if (ssp_machinfo->cs_lcdcon >= 0)
- GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */
- if (ssp_machinfo->cs_max1111 >= 0)
- GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
- if (ssp_machinfo->cs_ads7846 >= 0)
- GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
- ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
- ssp_enable(&corgi_ssp_dev);
-
- return 0;
-}
-
-static struct platform_driver corgissp_driver = {
- .probe = corgi_ssp_probe,
- .remove = corgi_ssp_remove,
- .suspend = corgi_ssp_suspend,
- .resume = corgi_ssp_resume,
- .driver = {
- .name = "corgi-ssp",
- },
-};
-
-int __init corgi_ssp_init(void)
-{
- return platform_driver_register(&corgissp_driver);
-}
-
-arch_initcall(corgi_ssp_init);
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 6f5569bac131..d82528e74bd0 100644
--- a/arch/arm/mach-pxa/cpu-pxa.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-pxa/cpu-pxa.c
+ * linux/arch/arm/mach-pxa/cpufreq-pxa2xx.c
*
* Copyright (C) 2002,2003 Intrinsyc Software
*
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
new file mode 100644
index 000000000000..1ea0c9c0adaf
--- /dev/null
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -0,0 +1,258 @@
+/*
+ * linux/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+ *
+ * Copyright (C) 2008 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa3xx-regs.h>
+
+#include "generic.h"
+
+#define HSS_104M (0)
+#define HSS_156M (1)
+#define HSS_208M (2)
+#define HSS_312M (3)
+
+#define SMCFS_78M (0)
+#define SMCFS_104M (2)
+#define SMCFS_208M (5)
+
+#define SFLFS_104M (0)
+#define SFLFS_156M (1)
+#define SFLFS_208M (2)
+#define SFLFS_312M (3)
+
+#define XSPCLK_156M (0)
+#define XSPCLK_NONE (3)
+
+#define DMCFS_26M (0)
+#define DMCFS_260M (3)
+
+struct pxa3xx_freq_info {
+ unsigned int cpufreq_mhz;
+ unsigned int core_xl : 5;
+ unsigned int core_xn : 3;
+ unsigned int hss : 2;
+ unsigned int dmcfs : 2;
+ unsigned int smcfs : 3;
+ unsigned int sflfs : 2;
+ unsigned int df_clkdiv : 3;
+
+ int vcc_core; /* in mV */
+ int vcc_sram; /* in mV */
+};
+
+#define OP(cpufreq, _xl, _xn, _hss, _dmc, _smc, _sfl, _dfi, vcore, vsram) \
+{ \
+ .cpufreq_mhz = cpufreq, \
+ .core_xl = _xl, \
+ .core_xn = _xn, \
+ .hss = HSS_##_hss##M, \
+ .dmcfs = DMCFS_##_dmc##M, \
+ .smcfs = SMCFS_##_smc##M, \
+ .sflfs = SFLFS_##_sfl##M, \
+ .df_clkdiv = _dfi, \
+ .vcc_core = vcore, \
+ .vcc_sram = vsram, \
+}
+
+static struct pxa3xx_freq_info pxa300_freqs[] = {
+ /* CPU XL XN HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */
+ OP(104, 8, 1, 104, 260, 78, 104, 3, 1000, 1100), /* 104MHz */
+ OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */
+ OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */
+ OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */
+};
+
+static struct pxa3xx_freq_info pxa320_freqs[] = {
+ /* CPU XL XN HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */
+ OP(104, 8, 1, 104, 260, 78, 104, 3, 1000, 1100), /* 104MHz */
+ OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */
+ OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */
+ OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */
+ OP(806, 31, 2, 208, 260, 208, 312, 3, 1400, 1400), /* 806MHz */
+};
+
+static unsigned int pxa3xx_freqs_num;
+static struct pxa3xx_freq_info *pxa3xx_freqs;
+static struct cpufreq_frequency_table *pxa3xx_freqs_table;
+
+static int setup_freqs_table(struct cpufreq_policy *policy,
+ struct pxa3xx_freq_info *freqs, int num)
+{
+ struct cpufreq_frequency_table *table;
+ int i;
+
+ table = kzalloc((num + 1) * sizeof(*table), GFP_KERNEL);
+ if (table == NULL)
+ return -ENOMEM;
+
+ for (i = 0; i < num; i++) {
+ table[i].index = i;
+ table[i].frequency = freqs[i].cpufreq_mhz * 1000;
+ }
+ table[num].frequency = i;
+ table[num].frequency = CPUFREQ_TABLE_END;
+
+ pxa3xx_freqs = freqs;
+ pxa3xx_freqs_num = num;
+ pxa3xx_freqs_table = table;
+
+ return cpufreq_frequency_table_cpuinfo(policy, table);
+}
+
+static void __update_core_freq(struct pxa3xx_freq_info *info)
+{
+ uint32_t mask = ACCR_XN_MASK | ACCR_XL_MASK;
+ uint32_t accr = ACCR;
+ uint32_t xclkcfg;
+
+ accr &= ~(ACCR_XN_MASK | ACCR_XL_MASK | ACCR_XSPCLK_MASK);
+ accr |= ACCR_XN(info->core_xn) | ACCR_XL(info->core_xl);
+
+ /* No clock until core PLL is re-locked */
+ accr |= ACCR_XSPCLK(XSPCLK_NONE);
+
+ xclkcfg = (info->core_xn == 2) ? 0x3 : 0x2; /* turbo bit */
+
+ ACCR = accr;
+ __asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg));
+
+ while ((ACSR & mask) != (accr & mask))
+ cpu_relax();
+}
+
+static void __update_bus_freq(struct pxa3xx_freq_info *info)
+{
+ uint32_t mask;
+ uint32_t accr = ACCR;
+
+ mask = ACCR_SMCFS_MASK | ACCR_SFLFS_MASK | ACCR_HSS_MASK |
+ ACCR_DMCFS_MASK;
+
+ accr &= ~mask;
+ accr |= ACCR_SMCFS(info->smcfs) | ACCR_SFLFS(info->sflfs) |
+ ACCR_HSS(info->hss) | ACCR_DMCFS(info->dmcfs);
+
+ ACCR = accr;
+
+ while ((ACSR & mask) != (accr & mask))
+ cpu_relax();
+}
+
+static int pxa3xx_cpufreq_verify(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, pxa3xx_freqs_table);
+}
+
+static unsigned int pxa3xx_cpufreq_get(unsigned int cpu)
+{
+ return get_clk_frequency_khz(0);
+}
+
+static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct pxa3xx_freq_info *next;
+ struct cpufreq_freqs freqs;
+ unsigned long flags;
+ int idx;
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ /* Lookup the next frequency */
+ if (cpufreq_frequency_table_target(policy, pxa3xx_freqs_table,
+ target_freq, relation, &idx))
+ return -EINVAL;
+
+ next = &pxa3xx_freqs[idx];
+
+ freqs.old = policy->cur;
+ freqs.new = next->cpufreq_mhz * 1000;
+ freqs.cpu = policy->cpu;
+
+ pr_debug("CPU frequency from %d MHz to %d MHz%s\n",
+ freqs.old / 1000, freqs.new / 1000,
+ (freqs.old == freqs.new) ? " (skipped)" : "");
+
+ if (freqs.old == target_freq)
+ return 0;
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ local_irq_save(flags);
+ __update_core_freq(next);
+ __update_bus_freq(next);
+ local_irq_restore(flags);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return 0;
+}
+
+static __init int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
+{
+ int ret = -EINVAL;
+
+ /* set default policy and cpuinfo */
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->cpuinfo.min_freq = 104000;
+ policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000;
+ policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
+ policy->cur = policy->min = policy->max = get_clk_frequency_khz(0);
+
+ if (cpu_is_pxa300() || cpu_is_pxa310())
+ ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa300_freqs));
+
+ if (cpu_is_pxa320())
+ ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa320_freqs));
+
+ if (ret) {
+ pr_err("failed to setup frequency table\n");
+ return ret;
+ }
+
+ pr_info("CPUFREQ support for PXA3xx initialized\n");
+ return 0;
+}
+
+static struct cpufreq_driver pxa3xx_cpufreq_driver = {
+ .verify = pxa3xx_cpufreq_verify,
+ .target = pxa3xx_cpufreq_set,
+ .init = pxa3xx_cpufreq_init,
+ .get = pxa3xx_cpufreq_get,
+ .name = "pxa3xx-cpufreq",
+};
+
+static int __init cpufreq_init(void)
+{
+ if (cpu_is_pxa3xx())
+ return cpufreq_register_driver(&pxa3xx_cpufreq_driver);
+
+ return 0;
+}
+module_init(cpufreq_init);
+
+static void __exit cpufreq_exit(void)
+{
+ cpufreq_unregister_driver(&pxa3xx_cpufreq_driver);
+}
+module_exit(cpufreq_exit);
+
+MODULE_DESCRIPTION("CPU frequency scaling driver for PXA3xx");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 887c738f5911..bb04af4b0aa3 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -32,5 +32,6 @@ extern struct platform_device pxa27x_device_pwm0;
extern struct platform_device pxa27x_device_pwm1;
extern struct platform_device pxa3xx_device_nand;
+extern struct platform_device pxa3xx_device_i2c_power;
void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
new file mode 100644
index 000000000000..d488eded2058
--- /dev/null
+++ b/arch/arm/mach-pxa/e330.c
@@ -0,0 +1,43 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+static void __init e330_init(void)
+{
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E330, "Toshiba e330")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e330_init,
+ .timer = &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
new file mode 100644
index 000000000000..8ecbc5479828
--- /dev/null
+++ b/arch/arm/mach-pxa/e350.c
@@ -0,0 +1,43 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+static void __init e350_init(void)
+{
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E350, "Toshiba e350")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e350_init,
+ .timer = &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
new file mode 100644
index 000000000000..544bbaa20621
--- /dev/null
+++ b/arch/arm/mach-pxa/e400.c
@@ -0,0 +1,94 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+
+#include <mach/pxafb.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+/* ------------------------ E400 LCD definitions ------------------------ */
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+ .pixclock = 140703,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .left_margin = 28,
+ .right_margin = 8,
+ .vsync_len = 3,
+ .upper_margin = 5,
+ .lower_margin = 6,
+ .sync = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+ .modes = &e400_pxafb_mode_info,
+ .num_modes = 1,
+ .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+ .lccr3 = 0,
+ .pxafb_backlight_power = NULL,
+};
+
+/* ------------------------ E400 MFP config ----------------------------- */
+
+static unsigned long e400_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO80_nCS_4, /* CS4 - TMIO */
+
+ /* Clocks */
+ GPIO12_32KHz,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+ /* wakeup */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ---------------------------------------------------------------------- */
+
+static void __init e400_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+ set_pxa_fb_info(&e400_pxafb_mach_info);
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E400, "Toshiba e400")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e400_init,
+ .timer = &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e400_lcd.c b/arch/arm/mach-pxa/e400_lcd.c
deleted file mode 100644
index 263884165f57..000000000000
--- a/arch/arm/mach-pxa/e400_lcd.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * e400_lcd.c
- *
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxafb.h>
-
-static struct pxafb_mode_info e400_pxafb_mode_info = {
- .pixclock = 140703,
- .xres = 240,
- .yres = 320,
- .bpp = 16,
- .hsync_len = 4,
- .left_margin = 28,
- .right_margin = 8,
- .vsync_len = 3,
- .upper_margin = 5,
- .lower_margin = 6,
- .sync = 0,
-};
-
-static struct pxafb_mach_info e400_pxafb_mach_info = {
- .modes = &e400_pxafb_mode_info,
- .num_modes = 1,
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = 0,
- .pxafb_backlight_power = NULL,
-};
-
-static int __init e400_lcd_init(void)
-{
- if (!machine_is_e400())
- return -ENODEV;
-
- set_pxa_fb_info(&e400_pxafb_mach_info);
- return 0;
-}
-
-module_init(e400_lcd_init);
-
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e400 lcd driver");
-MODULE_LICENSE("GPLv2");
-
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
new file mode 100644
index 000000000000..c57a15b37f0d
--- /dev/null
+++ b/arch/arm/mach-pxa/e740.c
@@ -0,0 +1,169 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+
+/* ------------------------ e740 video support --------------------------- */
+
+static struct w100_gen_regs e740_lcd_regs = {
+ .lcd_format = 0x00008023,
+ .lcdd_cntl1 = 0x0f000000,
+ .lcdd_cntl2 = 0x0003ffff,
+ .genlcd_cntl1 = 0x00ffff03,
+ .genlcd_cntl2 = 0x003c0f03,
+ .genlcd_cntl3 = 0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+ .xres = 240,
+ .yres = 320,
+ .left_margin = 20,
+ .right_margin = 28,
+ .upper_margin = 9,
+ .lower_margin = 8,
+ .crtc_ss = 0x80140013,
+ .crtc_ls = 0x81150110,
+ .crtc_gs = 0x80050005,
+ .crtc_vpos_gs = 0x000a0009,
+ .crtc_rev = 0x0040010a,
+ .crtc_dclk = 0xa906000a,
+ .crtc_gclk = 0x80050108,
+ .crtc_goe = 0x80050108,
+ .pll_freq = 57,
+ .pixclk_divider = 4,
+ .pixclk_divider_rotated = 4,
+ .pixclk_src = CLK_SRC_XTAL,
+ .sysclk_divider = 1,
+ .sysclk_src = CLK_SRC_PLL,
+ .crtc_ps1_active = 0x41060010,
+};
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+ .init_data1 = 0x21002103,
+ .gpio_dir1 = 0xffffdeff,
+ .gpio_oe1 = 0x03c00643,
+ .init_data2 = 0x003f003f,
+ .gpio_dir2 = 0xffffffff,
+ .gpio_oe2 = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+ .modelist = &e740_lcd_mode,
+ .num_modes = 1,
+ .regs = &e740_lcd_regs,
+ .gpio = &e740_w100_gpio_info,
+ .xtal_freq = 14318000,
+ .xtal_dbl = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+ [0] = {
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device e740_fb_device = {
+ .name = "w100fb",
+ .id = -1,
+ .dev = {
+ .platform_data = &e740_fb_info,
+ },
+ .num_resources = ARRAY_SIZE(e740_fb_resources),
+ .resource = e740_fb_resources,
+};
+
+/* --------------------------- MFP Pin config -------------------------- */
+
+static unsigned long e740_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO79_nCS_3, /* CS3 - IMAGEON */
+ GPIO80_nCS_4, /* CS4 - TMIO */
+
+ /* Clocks */
+ GPIO12_32KHz,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+ /* PC Card */
+ GPIO8_GPIO, /* CD0 */
+ GPIO44_GPIO, /* CD1 */
+ GPIO11_GPIO, /* IRQ0 */
+ GPIO6_GPIO, /* IRQ1 */
+ GPIO27_GPIO, /* RST0 */
+ GPIO24_GPIO, /* RST1 */
+ GPIO20_GPIO, /* PWR0 */
+ GPIO23_GPIO, /* PWR1 */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* wakeup */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+ &e740_fb_device,
+};
+
+static void __init e740_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E740, "Toshiba e740")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e740_init,
+ .timer = &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e740_lcd.c b/arch/arm/mach-pxa/e740_lcd.c
deleted file mode 100644
index 26bd599af178..000000000000
--- a/arch/arm/mach-pxa/e740_lcd.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/* e740_lcd.c
- *
- * This file contains the definitions for the LCD timings and functions
- * to control the LCD power / frontlighting via the w100fb driver.
- *
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-
-#include <video/w100fb.h>
-
-/*
-**potential** shutdown routine - to be investigated
-devmem2 0x0c010528 w 0xff3fff00
-devmem2 0x0c010190 w 0x7FFF8000
-devmem2 0x0c0101b0 w 0x00FF0000
-devmem2 0x0c01008c w 0x00000000
-devmem2 0x0c010080 w 0x000000bf
-devmem2 0x0c010098 w 0x00000015
-devmem2 0x0c010088 w 0x4b000204
-devmem2 0x0c010098 w 0x0000001d
-*/
-
-static struct w100_gen_regs e740_lcd_regs = {
- .lcd_format = 0x00008023,
- .lcdd_cntl1 = 0x0f000000,
- .lcdd_cntl2 = 0x0003ffff,
- .genlcd_cntl1 = 0x00ffff03,
- .genlcd_cntl2 = 0x003c0f03,
- .genlcd_cntl3 = 0x000143aa,
-};
-
-static struct w100_mode e740_lcd_mode = {
- .xres = 240,
- .yres = 320,
- .left_margin = 20,
- .right_margin = 28,
- .upper_margin = 9,
- .lower_margin = 8,
- .crtc_ss = 0x80140013,
- .crtc_ls = 0x81150110,
- .crtc_gs = 0x80050005,
- .crtc_vpos_gs = 0x000a0009,
- .crtc_rev = 0x0040010a,
- .crtc_dclk = 0xa906000a,
- .crtc_gclk = 0x80050108,
- .crtc_goe = 0x80050108,
- .pll_freq = 57,
- .pixclk_divider = 4,
- .pixclk_divider_rotated = 4,
- .pixclk_src = CLK_SRC_XTAL,
- .sysclk_divider = 1,
- .sysclk_src = CLK_SRC_PLL,
- .crtc_ps1_active = 0x41060010,
-};
-
-
-static struct w100_gpio_regs e740_w100_gpio_info = {
- .init_data1 = 0x21002103,
- .gpio_dir1 = 0xffffdeff,
- .gpio_oe1 = 0x03c00643,
- .init_data2 = 0x003f003f,
- .gpio_dir2 = 0xffffffff,
- .gpio_oe2 = 0x000000ff,
-};
-
-static struct w100fb_mach_info e740_fb_info = {
- .modelist = &e740_lcd_mode,
- .num_modes = 1,
- .regs = &e740_lcd_regs,
- .gpio = &e740_w100_gpio_info,
- .xtal_freq = 14318000,
- .xtal_dbl = 1,
-};
-
-static struct resource e740_fb_resources[] = {
- [0] = {
- .start = 0x0c000000,
- .end = 0x0cffffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-/* ----------------------- device declarations -------------------------- */
-
-
-static struct platform_device e740_fb_device = {
- .name = "w100fb",
- .id = -1,
- .dev = {
- .platform_data = &e740_fb_info,
- },
- .num_resources = ARRAY_SIZE(e740_fb_resources),
- .resource = e740_fb_resources,
-};
-
-static int e740_lcd_init(void)
-{
- int ret;
-
- if (!machine_is_e740())
- return -ENODEV;
-
- return platform_device_register(&e740_fb_device);
-}
-
-module_init(e740_lcd_init);
-
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e740 lcd driver");
-MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e750_lcd.c b/arch/arm/mach-pxa/e750.c
index 75edc3b5390f..640e738b85df 100644
--- a/arch/arm/mach-pxa/e750_lcd.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -1,25 +1,35 @@
-/* e750_lcd.c
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
*
- * This file contains the definitions for the LCD timings and functions
- * to control the LCD power / frontlighting via the w100fb driver.
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
*
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
*
*/
-#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/err.h>
#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/w100fb.h>
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <video/w100fb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+/* ---------------------- E750 LCD definitions -------------------- */
static struct w100_gen_regs e750_lcd_regs = {
.lcd_format = 0x00008003,
@@ -54,7 +64,6 @@ static struct w100_mode e750_lcd_mode = {
.sysclk_src = CLK_SRC_PLL,
};
-
static struct w100_gpio_regs e750_w100_gpio_info = {
.init_data1 = 0x01192f1b,
.gpio_dir1 = 0xd5ffdeff,
@@ -81,9 +90,6 @@ static struct resource e750_fb_resources[] = {
},
};
-/* ----------------------- device declarations -------------------------- */
-
-
static struct platform_device e750_fb_device = {
.name = "w100fb",
.id = -1,
@@ -94,16 +100,27 @@ static struct platform_device e750_fb_device = {
.resource = e750_fb_resources,
};
-static int e750_lcd_init(void)
-{
- if (!machine_is_e750())
- return -ENODEV;
+/* ----------------------------------------------------------------------- */
- return platform_device_register(&e750_fb_device);
+static struct platform_device *devices[] __initdata = {
+ &e750_fb_device,
+};
+
+static void __init e750_init(void)
+{
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ pxa_set_udc_info(&e7xx_udc_mach_info);
}
-module_init(e750_lcd_init);
+MACHINE_START(E750, "Toshiba e750")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e750_init,
+ .timer = &pxa_timer,
+MACHINE_END
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e750 lcd driver");
-MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e800_lcd.c b/arch/arm/mach-pxa/e800.c
index e6aeab0ebc22..a293e09bfe25 100644
--- a/arch/arm/mach-pxa/e800_lcd.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -1,25 +1,36 @@
-/* e800_lcd.c
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
*
- * This file contains the definitions for the LCD timings and functions
- * to control the LCD power / frontlighting via the w100fb driver.
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
*
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
*
*/
-#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/err.h>
#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/w100fb.h>
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <video/w100fb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/eseries-gpio.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+/* ------------------------ e800 LCD definitions ------------------------- */
static struct w100_gen_regs e800_lcd_regs = {
.lcd_format = 0x00008003,
@@ -71,8 +82,8 @@ static struct w100_mode e800_lcd_mode[2] = {
.crtc_goe = 0x80cc0015,
.crtc_ps1_active = 0x00000000,
.pll_freq = 100,
- .pixclk_divider = 6, /* Wince uses 14 which gives a 7MHz pclk. */
- .pixclk_divider_rotated = 6, /* we want a 14MHz one (much nicer to look at) */
+ .pixclk_divider = 6, /* Wince uses 14 which gives a */
+ .pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
.pixclk_src = CLK_SRC_PLL,
.sysclk_divider = 0,
.sysclk_src = CLK_SRC_PLL,
@@ -131,9 +142,6 @@ static struct resource e800_fb_resources[] = {
},
};
-/* ----------------------- device declarations -------------------------- */
-
-
static struct platform_device e800_fb_device = {
.name = "w100fb",
.id = -1,
@@ -144,16 +152,35 @@ static struct platform_device e800_fb_device = {
.resource = e800_fb_resources,
};
-static int e800_lcd_init(void)
-{
- if (!machine_is_e800())
- return -ENODEV;
+/* --------------------------- UDC definitions --------------------------- */
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+ .gpio_vbus = GPIO_E800_USB_DISC,
+ .gpio_pullup = GPIO_E800_USB_PULLUP,
+ .gpio_pullup_inverted = 1
+};
- return platform_device_register(&e800_fb_device);
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+ &e800_fb_device,
+};
+
+static void __init e800_init(void)
+{
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ pxa_set_udc_info(&e800_udc_mach_info);
}
-module_init(e800_lcd_init);
+MACHINE_START(E800, "Toshiba e800")
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e800_init,
+ .timer = &pxa_timer,
+MACHINE_END
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e800 lcd driver");
-MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 7a0a681a5847..f5ed8038ede5 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -373,10 +373,6 @@ static inline void em_x270_init_nand(void) {}
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int em_x270_ohci_init(struct device *dev)
{
- /* Set the Power Control Polarity Low */
- UHCHR = (UHCHR | UHCHR_PCPL) &
- ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
-
/* enable port 2 transiever */
UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
@@ -385,6 +381,7 @@ static int em_x270_ohci_init(struct device *dev)
static struct pxaohci_platform_data em_x270_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
.init = em_x270_ohci_init,
};
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 001a252bd514..d28849b50a14 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -19,68 +19,13 @@
#include <mach/mfp-pxa25x.h>
#include <mach/hardware.h>
+#include <mach/eseries-gpio.h>
+#include <mach/udc.h>
#include "generic.h"
-static unsigned long e740_pin_config[] __initdata = {
- /* Chip selects */
- GPIO15_nCS_1, /* CS1 - Flash */
- GPIO79_nCS_3, /* CS3 - IMAGEON */
- GPIO80_nCS_4, /* CS4 - TMIO */
-
- /* Clocks */
- GPIO12_32KHz,
-
- /* BTUART */
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
- GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
-
- /* PC Card */
- GPIO8_GPIO, /* CD0 */
- GPIO44_GPIO, /* CD1 */
- GPIO11_GPIO, /* IRQ0 */
- GPIO6_GPIO, /* IRQ1 */
- GPIO27_GPIO, /* RST0 */
- GPIO24_GPIO, /* RST1 */
- GPIO20_GPIO, /* PWR0 */
- GPIO23_GPIO, /* PWR1 */
- GPIO48_nPOE,
- GPIO49_nPWE,
- GPIO50_nPIOR,
- GPIO51_nPIOW,
- GPIO52_nPCE_1,
- GPIO53_nPCE_2,
- GPIO54_nPSKTSEL,
- GPIO55_nPREG,
- GPIO56_nPWAIT,
- GPIO57_nIOIS16,
-
- /* wakeup */
- GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-static unsigned long e400_pin_config[] __initdata = {
- /* Chip selects */
- GPIO15_nCS_1, /* CS1 - Flash */
- GPIO80_nCS_4, /* CS4 - TMIO */
-
- /* Clocks */
- GPIO12_32KHz,
-
- /* BTUART */
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
- GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
-
- /* wakeup */
- GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
/* Only e800 has 128MB RAM */
-static void __init eseries_fixup(struct machine_desc *desc,
+void __init eseries_fixup(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
mi->nr_banks=1;
@@ -92,95 +37,9 @@ static void __init eseries_fixup(struct machine_desc *desc,
mi->bank[0].size = (64*1024*1024);
}
-static void __init e740_init(void)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
-}
-
-static void __init e400_init(void)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
-}
-
-/* e-series machine definitions */
-
-#ifdef CONFIG_MACH_E330
-MACHINE_START(E330, "Toshiba e330")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E350
-MACHINE_START(E350, "Toshiba e350")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E740
-MACHINE_START(E740, "Toshiba e740")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .init_machine = e740_init,
- .timer = &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E750
-MACHINE_START(E750, "Toshiba e750")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E400
-MACHINE_START(E400, "Toshiba e400")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .init_machine = e400_init,
- .timer = &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E800
-MACHINE_START(E800, "Toshiba e800")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
-MACHINE_END
-#endif
+struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+ .gpio_vbus = GPIO_E7XX_USB_DISC,
+ .gpio_pullup = GPIO_E7XX_USB_PULLUP,
+ .gpio_pullup_inverted = 1
+};
diff --git a/arch/arm/mach-pxa/eseries.h b/arch/arm/mach-pxa/eseries.h
new file mode 100644
index 000000000000..a83f88d4b6ad
--- /dev/null
+++ b/arch/arm/mach-pxa/eseries.h
@@ -0,0 +1,4 @@
+void __init eseries_fixup(struct machine_desc *desc,
+ struct tag *tags, char **cmdline, struct meminfo *mi);
+
+extern struct pxa2xx_udc_mach_info e7xx_udc_mach_info;
diff --git a/arch/arm/mach-pxa/eseries_udc.c b/arch/arm/mach-pxa/eseries_udc.c
deleted file mode 100644
index d622c04c0d44..000000000000
--- a/arch/arm/mach-pxa/eseries_udc.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * UDC functions for the Toshiba e-series PDAs
- *
- * Copyright (c) Ian Molton 2003
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include <mach/udc.h>
-#include <mach/eseries-gpio.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/domain.h>
-
-/* local PXA generic code */
-#include "generic.h"
-
-static struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
- .gpio_vbus = GPIO_E7XX_USB_DISC,
- .gpio_pullup = GPIO_E7XX_USB_PULLUP,
- .gpio_pullup_inverted = 1
-};
-
-static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
- .gpio_vbus = GPIO_E800_USB_DISC,
- .gpio_pullup = GPIO_E800_USB_PULLUP,
- .gpio_pullup_inverted = 1
-};
-
-static int __init eseries_udc_init(void)
-{
- if (machine_is_e330() || machine_is_e350() ||
- machine_is_e740() || machine_is_e750() ||
- machine_is_e400())
- pxa_set_udc_info(&e7xx_udc_mach_info);
- else if (machine_is_e800())
- pxa_set_udc_info(&e800_udc_mach_info);
-
- return 0;
-}
-
-module_init(eseries_udc_init);
-
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("eseries UDC support");
-MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index ceaed0076366..85ed0b33331f 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -46,7 +46,7 @@ void clear_reset_status(unsigned int mask)
*/
unsigned int get_clk_frequency_khz(int info)
{
- if (cpu_is_pxa21x() || cpu_is_pxa25x())
+ if (cpu_is_pxa25x())
return pxa25x_get_clk_frequency_khz(info);
else if (cpu_is_pxa27x())
return pxa27x_get_clk_frequency_khz(info);
@@ -60,7 +60,7 @@ EXPORT_SYMBOL(get_clk_frequency_khz);
*/
unsigned int get_memclk_frequency_10khz(void)
{
- if (cpu_is_pxa21x() || cpu_is_pxa25x())
+ if (cpu_is_pxa25x())
return pxa25x_get_memclk_frequency_10khz();
else if (cpu_is_pxa27x())
return pxa27x_get_memclk_frequency_10khz();
@@ -88,11 +88,6 @@ static struct map_desc standard_io_desc[] __initdata = {
.pfn = __phys_to_pfn(0x48000000),
.length = 0x00200000,
.type = MT_DEVICE
- }, { /* USB host */
- .virtual = 0xf8000000,
- .pfn = __phys_to_pfn(0x4c000000),
- .length = 0x00100000,
- .type = MT_DEVICE
}, { /* Camera */
.virtual = 0xfa000000,
.pfn = __phys_to_pfn(0x50000000),
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 041c048320e4..dc876a8e6668 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -65,4 +65,5 @@ static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
extern struct sysdev_class pxa_irq_sysclass;
extern struct sysdev_class pxa_gpio_sysclass;
+extern struct sysdev_class pxa2xx_mfp_sysclass;
extern struct sysdev_class pxa3xx_mfp_sysclass;
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 418d4dfd44ab..14930cf8be7b 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -275,7 +275,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
loop = 1;
n = PXA_GPIO_IRQ_BASE + bit;
- desc_handle_irq(n, irq_desc + n);
+ generic_handle_irq(n);
bit = find_next_bit(gedr, GEDR_BITS, bit + 1);
}
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index c0092472fa58..d8962a0fb98d 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -20,8 +20,12 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
+#include <linux/delay.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/clk.h>
#include <asm/setup.h>
#include <asm/memory.h>
@@ -40,7 +44,7 @@
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa25x.h>
#include "generic.h"
@@ -85,21 +89,8 @@ static struct platform_device *devices[] __initdata = {
};
#ifdef CONFIG_MMC_PXA
-static struct pxamci_platform_data gumstix_mci_platform_data;
-
-static int gumstix_mci_init(struct device *dev, irq_handler_t detect_int,
- void *data)
-{
- pxa_gpio_mode(GPIO6_MMCCLK_MD);
- pxa_gpio_mode(GPIO53_MMCCLK_MD);
- pxa_gpio_mode(GPIO8_MMCCS0_MD);
-
- return 0;
-}
-
static struct pxamci_platform_data gumstix_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = gumstix_mci_init,
};
static void __init gumstix_mmc_init(void)
@@ -109,11 +100,11 @@ static void __init gumstix_mmc_init(void)
#else
static void __init gumstix_mmc_init(void)
{
- printk(KERN_INFO "Gumstix mmc disabled\n");
+ pr_debug("Gumstix mmc disabled\n");
}
#endif
-#ifdef CONFIG_USB_GADGET_PXA2XX
+#ifdef CONFIG_USB_GADGET_PXA25X
static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = {
.gpio_vbus = GPIO_GUMSTIX_USB_GPIOn,
.gpio_pullup = GPIO_GUMSTIX_USB_GPIOx,
@@ -126,12 +117,87 @@ static void __init gumstix_udc_init(void)
#else
static void gumstix_udc_init(void)
{
- printk(KERN_INFO "Gumstix udc is disabled\n");
+ pr_debug("Gumstix udc is disabled\n");
}
#endif
+#ifdef CONFIG_BT
+/* Normally, the bootloader would have enabled this 32kHz clock but many
+** boards still have u-boot 1.1.4 so we check if it has been turned on and
+** if not, we turn it on with a warning message. */
+static void gumstix_setup_bt_clock(void)
+{
+ int timeout = 500;
+
+ if (!(OSCC & OSCC_OOK))
+ pr_warning("32kHz clock was not on. Bootloader may need to "
+ "be updated\n");
+ else
+ return;
+
+ OSCC |= OSCC_OON;
+ do {
+ if (OSCC & OSCC_OOK)
+ break;
+ udelay(1);
+ } while (--timeout);
+ if (!timeout)
+ pr_err("Failed to start 32kHz clock\n");
+}
+
+static void __init gumstix_bluetooth_init(void)
+{
+ int err;
+
+ gumstix_setup_bt_clock();
+
+ err = gpio_request(GPIO_GUMSTIX_BTRESET, "BTRST");
+ if (err) {
+ pr_err("gumstix: failed request gpio for bluetooth reset\n");
+ return;
+ }
+
+ err = gpio_direction_output(GPIO_GUMSTIX_BTRESET, 1);
+ if (err) {
+ pr_err("gumstix: can't reset bluetooth\n");
+ return;
+ }
+ gpio_set_value(GPIO_GUMSTIX_BTRESET, 0);
+ udelay(100);
+ gpio_set_value(GPIO_GUMSTIX_BTRESET, 1);
+}
+#else
+static void gumstix_bluetooth_init(void)
+{
+ pr_debug("Gumstix Bluetooth is disabled\n");
+}
+#endif
+
+static unsigned long gumstix_pin_config[] __initdata = {
+ GPIO12_32KHz,
+ /* BTUART */
+ GPIO42_HWUART_RXD,
+ GPIO43_HWUART_TXD,
+ GPIO44_HWUART_CTS,
+ GPIO45_HWUART_RTS,
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO53_MMC_CLK,
+ GPIO8_MMC_CS0,
+ /* these are used by AM200EPD */
+ GPIO51_GPIO,
+ GPIO49_GPIO,
+ GPIO48_GPIO,
+ GPIO32_GPIO,
+ GPIO17_GPIO,
+ GPIO16_GPIO,
+};
+
static void __init gumstix_init(void)
{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(gumstix_pin_config));
+
+ gumstix_bluetooth_init();
gumstix_udc_init();
gumstix_mmc_init();
(void) platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 5aa0270d5605..013b15baa034 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -32,7 +32,7 @@
#include <asm/mach/map.h>
#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa25x.h>
#include <mach/idp.h>
#include <mach/pxafb.h>
#include <mach/bitfield.h>
@@ -46,6 +46,47 @@
* - Ethernet interrupt
*/
+static unsigned long idp_pin_config[] __initdata = {
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* STUART */
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+
+ /* Ethernet */
+ GPIO33_nCS_5, /* Ethernet CS */
+ GPIO4_GPIO, /* Ethernet IRQ */
+};
+
static struct resource smc91x_resources[] = {
[0] = {
.start = (IDP_ETH_PHYS + 0x300),
@@ -121,44 +162,28 @@ static struct pxafb_mach_info sharp_lm8v31 = {
.num_modes = 1,
.cmap_inverse = 0,
.cmap_static = 0,
- .lccr0 = LCCR0_SDS,
- .lccr3 = LCCR3_PCP | LCCR3_Acb(255),
+ .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_AC_BIAS_FREQ(255),
.pxafb_backlight_power = &idp_backlight_power,
.pxafb_lcd_power = &idp_lcd_power
};
-static int idp_mci_init(struct device *dev, irq_handler_t idp_detect_int, void *data)
-{
- /* setup GPIO for PXA25x MMC controller */
- pxa_gpio_mode(GPIO6_MMCCLK_MD);
- pxa_gpio_mode(GPIO8_MMCCS0_MD);
-
- return 0;
-}
-
static struct pxamci_platform_data idp_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = idp_mci_init,
};
static void __init idp_init(void)
{
printk("idp_init()\n");
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
+
platform_device_register(&smc91x_device);
//platform_device_register(&mst_audio_device);
set_pxa_fb_info(&sharp_lm8v31);
pxa_set_mci_info(&idp_mci_platform_data);
}
-static void __init idp_init_irq(void)
-{
-
- pxa25x_init_irq();
-
- set_irq_type(TOUCH_PANEL_IRQ, TOUCH_PANEL_IRQ_EDGE);
-}
-
static struct map_desc idp_io_desc[] __initdata = {
{
.virtual = IDP_COREVOLT_VIRT,
@@ -177,15 +202,6 @@ static void __init idp_map_io(void)
{
pxa_map_io();
iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
-
- // serial ports 2 & 3
- pxa_gpio_mode(GPIO42_BTRXD_MD);
- pxa_gpio_mode(GPIO43_BTTXD_MD);
- pxa_gpio_mode(GPIO44_BTCTS_MD);
- pxa_gpio_mode(GPIO45_BTRTS_MD);
- pxa_gpio_mode(GPIO46_STRXD_MD);
- pxa_gpio_mode(GPIO47_STTXD_MD);
-
}
@@ -194,7 +210,7 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = idp_map_io,
- .init_irq = idp_init_irq,
+ .init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = idp_init,
MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/akita.h b/arch/arm/mach-pxa/include/mach/akita.h
deleted file mode 100644
index 5d8cc1d9cb10..000000000000
--- a/arch/arm/mach-pxa/include/mach/akita.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Hardware specific definitions for SL-C1000 (Akita)
- *
- * Copyright (c) 2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-/* Akita IO Expander GPIOs */
-
-#define AKITA_IOEXP_RESERVED_7 (1 << 7)
-#define AKITA_IOEXP_IR_ON (1 << 6)
-#define AKITA_IOEXP_AKIN_PULLUP (1 << 5)
-#define AKITA_IOEXP_BACKLIGHT_CONT (1 << 4)
-#define AKITA_IOEXP_BACKLIGHT_ON (1 << 3)
-#define AKITA_IOEXP_MIC_BIAS (1 << 2)
-#define AKITA_IOEXP_RESERVED_1 (1 << 1)
-#define AKITA_IOEXP_RESERVED_0 (1 << 0)
-
-/* Direction Bitfield 0=output 1=input */
-#define AKITA_IOEXP_IO_DIR 0
-/* Default Values */
-#define AKITA_IOEXP_IO_OUT (AKITA_IOEXP_IR_ON | AKITA_IOEXP_AKIN_PULLUP)
-
-extern struct platform_device akitaioexp_device;
-
-void akita_set_ioexp(struct device *dev, unsigned char bitmask);
-void akita_reset_ioexp(struct device *dev, unsigned char bitmask);
-
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index bf856503baf6..585970ef08ce 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -98,12 +98,21 @@
CORGI_SCP_MIC_BIAS )
#define CORGI_SCOOP_IO_OUT ( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
+#define CORGI_SCOOP_GPIO_BASE (NR_BUILTIN_GPIO)
+#define CORGI_GPIO_LED_GREEN (CORGI_SCOOP_GPIO_BASE + 0)
+#define CORGI_GPIO_SWA (CORGI_SCOOP_GPIO_BASE + 1) /* Hinge Switch A */
+#define CORGI_GPIO_SWB (CORGI_SCOOP_GPIO_BASE + 2) /* Hinge Switch B */
+#define CORGI_GPIO_MUTE_L (CORGI_SCOOP_GPIO_BASE + 3)
+#define CORGI_GPIO_MUTE_R (CORGI_SCOOP_GPIO_BASE + 4)
+#define CORGI_GPIO_AKIN_PULLUP (CORGI_SCOOP_GPIO_BASE + 5)
+#define CORGI_GPIO_APM_ON (CORGI_SCOOP_GPIO_BASE + 6)
+#define CORGI_GPIO_BACKLIGHT_CONT (CORGI_SCOOP_GPIO_BASE + 7)
+#define CORGI_GPIO_MIC_BIAS (CORGI_SCOOP_GPIO_BASE + 8)
/*
* Shared data structures
*/
extern struct platform_device corgiscoop_device;
-extern struct platform_device corgissp_device;
#endif /* __ASM_ARCH_CORGI_H */
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
index de16c12d5232..f6b4bf3e73d2 100644
--- a/arch/arm/mach-pxa/include/mach/entry-macro.S
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -41,7 +41,7 @@
and \irqstat, \irqstat, \irqnr
clz \irqnr, \irqstat
rsb \irqnr, \irqnr, #31
- add \irqnr, \irqnr, #32
+ add \irqnr, \irqnr, #(32 + PXA_IRQ(0))
b 1001f
1003:
mrc p6, 0, \irqstat, c0, c0, 0 @ ICIP
@@ -52,6 +52,6 @@
rsb \irqstat, \irqnr, #0
and \irqstat, \irqstat, \irqnr
clz \irqnr, \irqstat
- rsb \irqnr, \irqnr, #31
+ rsb \irqnr, \irqnr, #(31 + PXA_IRQ(0))
1001:
.endm
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index a1a0a2ffd642..a582a6d9b92b 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -64,26 +64,72 @@
#include <asm/cputype.h>
+/*
+ * CPU Stepping CPU_ID JTAG_ID
+ *
+ * PXA210 B0 0x69052922 0x2926C013
+ * PXA210 B1 0x69052923 0x3926C013
+ * PXA210 B2 0x69052924 0x4926C013
+ * PXA210 C0 0x69052D25 0x5926C013
+ *
+ * PXA250 A0 0x69052100 0x09264013
+ * PXA250 A1 0x69052101 0x19264013
+ * PXA250 B0 0x69052902 0x29264013
+ * PXA250 B1 0x69052903 0x39264013
+ * PXA250 B2 0x69052904 0x49264013
+ * PXA250 C0 0x69052D05 0x59264013
+ *
+ * PXA255 A0 0x69052D06 0x69264013
+ *
+ * PXA26x A0 0x69052903 0x39264013
+ * PXA26x B0 0x69052D05 0x59264013
+ *
+ * PXA27x A0 0x69054110 0x09265013
+ * PXA27x A1 0x69054111 0x19265013
+ * PXA27x B0 0x69054112 0x29265013
+ * PXA27x B1 0x69054113 0x39265013
+ * PXA27x C0 0x69054114 0x49265013
+ * PXA27x C5 0x69054117 0x79265013
+ *
+ * PXA30x A0 0x69056880 0x0E648013
+ * PXA30x A1 0x69056881 0x1E648013
+ * PXA31x A0 0x69056890 0x0E649013
+ * PXA31x A1 0x69056891 0x1E649013
+ * PXA31x A2 0x69056892 0x2E649013
+ * PXA32x B1 0x69056825 0x5E642013
+ * PXA32x B2 0x69056826 0x6E642013
+ *
+ * PXA930 B0 0x69056835 0x5E643013
+ * PXA930 B1 0x69056837 0x7E643013
+ * PXA930 B2 0x69056838 0x8E643013
+ */
#ifdef CONFIG_PXA25x
-#define __cpu_is_pxa21x(id) \
+#define __cpu_is_pxa210(id) \
({ \
- unsigned int _id = (id) >> 4 & 0xf3f; \
- _id == 0x212; \
+ unsigned int _id = (id) & 0xf3f0; \
+ _id == 0x2120; \
})
-#define __cpu_is_pxa255(id) \
- ({ \
- unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x2d0; \
- })
+#define __cpu_is_pxa250(id) \
+ ({ \
+ unsigned int _id = (id) & 0xf3ff; \
+ _id <= 0x2105; \
+ })
+
+#define __cpu_is_pxa255(id) \
+ ({ \
+ unsigned int _id = (id) & 0xffff; \
+ _id == 0x2d06; \
+ })
#define __cpu_is_pxa25x(id) \
({ \
- unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x2d0 || _id == 0x290; \
+ unsigned int _id = (id) & 0xf300; \
+ _id == 0x2100; \
})
#else
-#define __cpu_is_pxa21x(id) (0)
+#define __cpu_is_pxa210(id) (0)
+#define __cpu_is_pxa250(id) (0)
#define __cpu_is_pxa255(id) (0)
#define __cpu_is_pxa25x(id) (0)
#endif
@@ -138,9 +184,14 @@
#define __cpu_is_pxa930(id) (0)
#endif
-#define cpu_is_pxa21x() \
+#define cpu_is_pxa210() \
({ \
- __cpu_is_pxa21x(read_cpuid_id()); \
+ __cpu_is_pxa210(read_cpuid_id()); \
+ })
+
+#define cpu_is_pxa250() \
+ ({ \
+ __cpu_is_pxa250(read_cpuid_id()); \
})
#define cpu_is_pxa255() \
@@ -153,6 +204,8 @@
__cpu_is_pxa25x(read_cpuid_id()); \
})
+extern int cpu_is_pxa26x(void);
+
#define cpu_is_pxa27x() \
({ \
__cpu_is_pxa27x(read_cpuid_id()); \
diff --git a/arch/arm/mach-pxa/include/mach/i2c.h b/arch/arm/mach-pxa/include/mach/i2c.h
index 80596b013443..1a9f65e6ec0f 100644
--- a/arch/arm/mach-pxa/include/mach/i2c.h
+++ b/arch/arm/mach-pxa/include/mach/i2c.h
@@ -65,13 +65,18 @@ struct i2c_pxa_platform_data {
unsigned int slave_addr;
struct i2c_slave_client *slave;
unsigned int class;
- int use_pio;
+ unsigned int use_pio :1;
+ unsigned int fast_mode :1;
};
extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
#ifdef CONFIG_PXA27x
-extern void pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info);
+extern void pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info);
+#endif
+
+#ifdef CONFIG_PXA3xx
+extern void pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info);
#endif
#endif
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 108b5db9b2af..9c163e19ada9 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -11,7 +11,14 @@
*/
-#define PXA_IRQ(x) (x)
+#ifdef CONFIG_PXA_HAVE_ISA_IRQS
+#define PXA_ISA_IRQ(x) (x)
+#define PXA_ISA_IRQ_NUM (16)
+#else
+#define PXA_ISA_IRQ_NUM (0)
+#endif
+
+#define PXA_IRQ(x) (PXA_ISA_IRQ_NUM + (x))
#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */
@@ -73,7 +80,7 @@
#define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */
#endif
-#define PXA_GPIO_IRQ_BASE (64)
+#define PXA_GPIO_IRQ_BASE PXA_IRQ(64)
#define PXA_GPIO_IRQ_NUM (128)
#define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x))
@@ -178,13 +185,7 @@
#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1)
#elif defined(CONFIG_SHARP_LOCOMO)
#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1)
-#elif defined(CONFIG_ARCH_LUBBOCK) || \
- defined(CONFIG_MACH_LOGICPD_PXA270) || \
- defined(CONFIG_MACH_TOSA) || \
- defined(CONFIG_MACH_MAINSTONE) || \
- defined(CONFIG_MACH_PCM027) || \
- defined(CONFIG_ARCH_PXA_ESERIES) || \
- defined(CONFIG_MACH_MAGICIAN)
+#elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
#define NR_IRQS (IRQ_BOARD_END)
#elif defined(CONFIG_MACH_ZYLONITE)
#define NR_IRQS (IRQ_BOARD_START + 32)
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index 79d209b826f4..5c4e320c1437 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -3,4 +3,6 @@
#define LITTLETON_ETH_PHYS 0x30000000
+#define LITTLETON_GPIO_LCD_CS (17)
+
#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
index 552eb7fa6579..59aef89808d6 100644
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -40,11 +40,11 @@
#define NODE_MEM_SIZE_BITS 26
#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-void cmx270_pci_adjust_zones(int node, unsigned long *size,
+void cmx2xx_pci_adjust_zones(int node, unsigned long *size,
unsigned long *holes);
#define arch_adjust_zones(node, size, holes) \
- cmx270_pci_adjust_zones(node, size, holes)
+ cmx2xx_pci_adjust_zones(node, size, holes)
#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1)
#endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index 6c8e72238bfd..617cab2cc8d0 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -17,7 +17,7 @@
/* Crystal and Clock Signals */
#define GPIO10_RTCCLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
-#define GPIO70_RTC_CLK MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
+#define GPIO70_RTCCLK MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
#define GPIO7_48MHz MFP_CFG_OUT(GPIO7, AF1, DRIVE_LOW)
#define GPIO11_3_6MHz MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
#define GPIO71_3_6MHz MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW)
@@ -156,6 +156,6 @@
#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
-#define GPIO77_LCD_ACBIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+#define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
#endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
index 74990510cf34..67f8385ea548 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -257,10 +257,10 @@
#define GPIO38_SSP2_RXD MFP_CFG(GPIO38, AF2)
#define GPIO38_SSP2_TXD MFP_CFG(GPIO38, AF5)
-#define GPIO69_SSP3_SCLK MFP_CFG(GPIO69, AF2, DS08X, FLOAT)
-#define GPIO70_SSP3_FRM MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW)
-#define GPIO89_SSP3_SCLK MFP_CFG(GPIO89, AF1, DS08X, FLOAT)
-#define GPIO90_SSP3_FRM MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW)
+#define GPIO69_SSP3_SCLK MFP_CFG_X(GPIO69, AF2, DS08X, FLOAT)
+#define GPIO70_SSP3_FRM MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO89_SSP3_SCLK MFP_CFG_X(GPIO89, AF1, DS08X, FLOAT)
+#define GPIO90_SSP3_FRM MFP_CFG_X(GPIO90, AF1, DS08X, DRIVE_LOW)
#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
#define GPIO72_SSP3_RXD MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
index 8769567b389b..482185053a92 100644
--- a/arch/arm/mach-pxa/include/mach/mfp.h
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -274,12 +274,13 @@ typedef unsigned long mfp_cfg_t;
#define MFP_DS_MASK (0x7 << 13)
#define MFP_DS(x) (((x) >> 13) & 0x7)
-#define MFP_LPM_INPUT (0x0 << 16)
+#define MFP_LPM_DEFAULT (0x0 << 16)
#define MFP_LPM_DRIVE_LOW (0x1 << 16)
#define MFP_LPM_DRIVE_HIGH (0x2 << 16)
#define MFP_LPM_PULL_LOW (0x3 << 16)
#define MFP_LPM_PULL_HIGH (0x4 << 16)
#define MFP_LPM_FLOAT (0x5 << 16)
+#define MFP_LPM_INPUT (0x6 << 16)
#define MFP_LPM_STATE_MASK (0x7 << 16)
#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7)
@@ -297,7 +298,7 @@ typedef unsigned long mfp_cfg_t;
#define MFP_PULL_MASK (0x3 << 21)
#define MFP_PULL(x) (((x) >> 21) & 0x3)
-#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\
+#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
#define MFP_CFG(pin, af) \
diff --git a/arch/arm/mach-pxa/include/mach/mioa701.h b/arch/arm/mach-pxa/include/mach/mioa701.h
new file mode 100644
index 000000000000..8483cb511831
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mioa701.h
@@ -0,0 +1,67 @@
+#ifndef _MIOA701_H_
+#define _MIOA701_H_
+
+#define MIO_CFG_IN(pin, af) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
+ (MFP_PIN(pin) | MFP_##af | MFP_DIR_IN))
+
+#define MIO_CFG_OUT(pin, af, state) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
+ (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
+
+/* Global GPIOs */
+#define GPIO9_CHARGE_nEN 9
+#define GPIO18_POWEROFF 18
+#define GPIO87_LCD_POWER 87
+
+/* USB */
+#define GPIO13_USB_DETECT 13
+#define GPIO22_USB_ENABLE 22
+
+/* SDIO bits */
+#define GPIO78_SDIO_RO 78
+#define GPIO15_SDIO_INSERT 15
+#define GPIO91_SDIO_EN 91
+
+/* Bluetooth */
+#define GPIO83_BT_ON 83
+
+/* GPS */
+#define GPIO23_GPS_UNKNOWN1 23
+#define GPIO26_GPS_ON 26
+#define GPIO27_GPS_RESET 27
+#define GPIO106_GPS_UNKNOWN2 106
+#define GPIO107_GPS_UNKNOWN3 107
+
+/* GSM */
+#define GPIO24_GSM_MOD_RESET_CMD 24
+#define GPIO88_GSM_nMOD_ON_CMD 88
+#define GPIO90_GSM_nMOD_OFF_CMD 90
+#define GPIO114_GSM_nMOD_DTE_UART_STATE 114
+#define GPIO25_GSM_MOD_ON_STATE 25
+#define GPIO113_GSM_EVENT 113
+
+/* SOUND */
+#define GPIO12_HPJACK_INSERT 12
+
+/* LEDS */
+#define GPIO10_LED_nCharging 10
+#define GPIO97_LED_nBlue 97
+#define GPIO98_LED_nOrange 98
+#define GPIO82_LED_nVibra 82
+#define GPIO115_LED_nKeyboard 115
+
+/* Keyboard */
+#define GPIO0_KEY_POWER 0
+#define GPIO93_KEY_VOLUME_UP 93
+#define GPIO94_KEY_VOLUME_DOWN 94
+
+extern struct input_dev *mioa701_evdev;
+extern void mioa701_gpio_lpm_set(unsigned long mfp_pin);
+
+/* Assembler externals mioa701_bootresume.S */
+extern u32 mioa701_bootstrap;
+extern u32 mioa701_jumpaddr;
+extern u32 mioa701_bootstrap_lg;
+
+#endif /* _MIOA701_H */
diff --git a/arch/arm/mach-pxa/include/mach/ohci.h b/arch/arm/mach-pxa/include/mach/ohci.h
index e848a47128cd..95b6e2a6e514 100644
--- a/arch/arm/mach-pxa/include/mach/ohci.h
+++ b/arch/arm/mach-pxa/include/mach/ohci.h
@@ -7,6 +7,22 @@ struct pxaohci_platform_data {
int (*init)(struct device *);
void (*exit)(struct device *);
+ unsigned long flags;
+#define ENABLE_PORT1 (1 << 0)
+#define ENABLE_PORT2 (1 << 1)
+#define ENABLE_PORT3 (1 << 2)
+#define ENABLE_PORT_ALL (ENABLE_PORT1 | ENABLE_PORT2 | ENABLE_PORT3)
+
+#define POWER_SENSE_LOW (1 << 3)
+#define POWER_CONTROL_LOW (1 << 4)
+#define NO_OC_PROTECTION (1 << 5)
+#define OC_MODE_GLOBAL (0 << 6)
+#define OC_MODE_PERPORT (1 << 6)
+
+ int power_on_delay; /* Power On to Power Good time - in ms
+ * HCD must wait for this duration before
+ * accessing a powered on port
+ */
int port_mode;
#define PMM_NPS_MODE 1
#define PMM_GLOBAL_MODE 2
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
new file mode 100644
index 000000000000..5032307ebf7d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -0,0 +1,80 @@
+/*
+ * GPIOs and interrupts for Palm Zire72 Handheld Computer
+ *
+ * Authors: Alex Osborne <bobofdoom@gmail.com>
+ * Jan Herman <2hp@seznam.cz>
+ * Sergey Lapin <slapin@ossfans.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMZ72_H_
+#define _INCLUDE_PALMZ72_H_
+
+/* Power and control */
+#define GPIO_NR_PALMZ72_GPIO_RESET 1
+#define GPIO_NR_PALMZ72_POWER_DETECT 0
+
+/* SD/MMC */
+#define GPIO_NR_PALMZ72_SD_DETECT_N 14
+#define GPIO_NR_PALMZ72_SD_POWER_N 98
+#define GPIO_NR_PALMZ72_SD_RO 115
+
+/* Touchscreen */
+#define GPIO_NR_PALMZ72_WM9712_IRQ 27
+
+/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMZ72_IR_DISABLE 49
+
+/* USB */
+#define GPIO_NR_PALMZ72_USB_DETECT_N 15
+#define GPIO_NR_PALMZ72_USB_POWER 95
+#define GPIO_NR_PALMZ72_USB_PULLUP 12
+
+/* LCD/Backlight */
+#define GPIO_NR_PALMZ72_BL_POWER 20
+#define GPIO_NR_PALMZ72_LCD_POWER 96
+
+/* LED */
+#define GPIO_NR_PALMZ72_LED_GREEN 88
+
+/* Bluetooth */
+#define GPIO_NR_PALMZ72_BT_POWER 17
+#define GPIO_NR_PALMZ72_BT_RESET 83
+
+/** Initial values **/
+
+/* Battery */
+#define PALMZ72_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
+#define PALMZ72_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
+#define PALMZ72_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMZ72_BAT_MIN_CURRENT 0 /* unknown */
+#define PALMZ72_BAT_MAX_CHARGE 1 /* unknown */
+#define PALMZ72_BAT_MIN_CHARGE 1 /* unknown */
+#define PALMZ72_MAX_LIFE_MINS 360 /* on-life in minutes */
+
+/* Backlight */
+#define PALMZ72_MAX_INTENSITY 0xFE
+#define PALMZ72_DEFAULT_INTENSITY 0x7E
+#define PALMZ72_LIMIT_MASK 0x7F
+#define PALMZ72_PRESCALER 0x3F
+#define PALMZ72_PERIOD_NS 3500
+
+#ifdef CONFIG_PM
+struct palmz72_resume_info {
+ u32 magic0; /* 0x0 */
+ u32 magic1; /* 0x4 */
+ u32 resume_addr; /* 0x8 */
+ u32 pad[11]; /* 0xc..0x37 */
+ u32 arm_control; /* 0x38 */
+ u32 aux_control; /* 0x3c */
+ u32 ttb; /* 0x40 */
+ u32 domain_access; /* 0x44 */
+ u32 process_id; /* 0x48 */
+};
+#endif
+#endif
+
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index 261e5bc958db..83342469acac 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -15,6 +15,8 @@ struct pxa_cpu_pm_fns {
void (*restore)(unsigned long *);
int (*valid)(suspend_state_t state);
void (*enter)(suspend_state_t state);
+ int (*prepare)(void);
+ void (*finish)(void);
};
extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
index 67debc47e8c6..0b3e6d051c64 100644
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -23,6 +23,7 @@
#define POODLE_GPIO_AC_IN (1)
#define POODLE_GPIO_CO 16
#define POODLE_GPIO_TP_INT (5)
+#define POODLE_GPIO_TP_CS (24)
#define POODLE_GPIO_WAKEUP (11) /* change battery */
#define POODLE_GPIO_GA_INT (10)
#define POODLE_GPIO_IR_ON (22)
@@ -70,6 +71,14 @@
#define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
#define POODLE_SCOOP_IO_OUT ( 0 )
+#define POODLE_SCOOP_GPIO_BASE (NR_BUILTIN_GPIO)
+#define POODLE_GPIO_CHARGE_ON (POODLE_SCOOP_GPIO_BASE + 0)
+#define POODLE_GPIO_CP401 (POODLE_SCOOP_GPIO_BASE + 2)
+#define POODLE_GPIO_VPEN (POODLE_SCOOP_GPIO_BASE + 7)
+#define POODLE_GPIO_L_PCLK (POODLE_SCOOP_GPIO_BASE + 9)
+#define POODLE_GPIO_L_LCLK (POODLE_SCOOP_GPIO_BASE + 10)
+#define POODLE_GPIO_HS_OUT (POODLE_SCOOP_GPIO_BASE + 11)
+
#define POODLE_LOCOMO_GPIO_AMP_ON LOCOMO_GPIO(8)
#define POODLE_LOCOMO_GPIO_MUTE_L LOCOMO_GPIO(10)
#define POODLE_LOCOMO_GPIO_MUTE_R LOCOMO_GPIO(11)
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
index 12288ca3cbb2..15295d960000 100644
--- a/arch/arm/mach-pxa/include/mach/pxa-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -69,30 +69,18 @@
/*
* DMA Controller
*/
-
-#define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */
-#define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */
-#define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */
-#define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */
-#define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */
-#define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */
-#define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */
-#define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */
-#define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */
-#define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */
-#define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */
-#define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */
-#define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */
-#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */
-#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */
-#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */
-
#define DCSR(x) __REG2(0x40000000, (x) << 2)
#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
-#ifdef CONFIG_PXA27x
+#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
+#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
+#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
+#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
+#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
@@ -101,11 +89,6 @@
#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
#define DCSR_EORINTR (1 << 9) /* The end of Receive */
#endif
-#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
-#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
-#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
-#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
-#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
#define DALGN __REG(0x400000a0) /* DMA Alignment Register */
#define DINT __REG(0x400000f0) /* DMA Interrupt Register */
@@ -114,145 +97,9 @@
&__REG2(0x40000100, ((n) & 0x3f) << 2) : \
&__REG2(0x40001100, ((n) & 0x3f) << 2)))
-#define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */
-#define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */
-#define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */
-#define DRCMR3 __REG(0x4000010c) /* Request to Channel Map Register for I2S transmit Request */
-#define DRCMR4 __REG(0x40000110) /* Request to Channel Map Register for BTUART receive Request */
-#define DRCMR5 __REG(0x40000114) /* Request to Channel Map Register for BTUART transmit Request. */
-#define DRCMR6 __REG(0x40000118) /* Request to Channel Map Register for FFUART receive Request */
-#define DRCMR7 __REG(0x4000011c) /* Request to Channel Map Register for FFUART transmit Request */
-#define DRCMR8 __REG(0x40000120) /* Request to Channel Map Register for AC97 microphone Request */
-#define DRCMR9 __REG(0x40000124) /* Request to Channel Map Register for AC97 modem receive Request */
-#define DRCMR10 __REG(0x40000128) /* Request to Channel Map Register for AC97 modem transmit Request */
-#define DRCMR11 __REG(0x4000012c) /* Request to Channel Map Register for AC97 audio receive Request */
-#define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */
-#define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */
-#define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */
-#define DRCMR15 __REG(0x4000013c) /* Request to Channel Map Register for SSP2 receive Request */
-#define DRCMR16 __REG(0x40000140) /* Request to Channel Map Register for SSP2 transmit Request */
-#define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */
-#define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */
-#define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */
-#define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */
-#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */
-#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */
-#define DRCMR23 __REG(0x4000015c) /* Reserved */
-#define DRCMR24 __REG(0x40000160) /* Reserved */
-#define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */
-#define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */
-#define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */
-#define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */
-#define DRCMR29 __REG(0x40000174) /* Reserved */
-#define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */
-#define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */
-#define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */
-#define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */
-#define DRCMR34 __REG(0x40000188) /* Reserved */
-#define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */
-#define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */
-#define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */
-#define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */
-#define DRCMR39 __REG(0x4000019C) /* Reserved */
-#define DRCMR66 __REG(0x40001108) /* Request to Channel Map Register for SSP3 receive Request */
-#define DRCMR67 __REG(0x4000110C) /* Request to Channel Map Register for SSP3 transmit Request */
-#define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */
-#define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */
-#define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */
-
-#define DRCMRRXSADR DRCMR2
-#define DRCMRTXSADR DRCMR3
-#define DRCMRRXBTRBR DRCMR4
-#define DRCMRTXBTTHR DRCMR5
-#define DRCMRRXFFRBR DRCMR6
-#define DRCMRTXFFTHR DRCMR7
-#define DRCMRRXMCDR DRCMR8
-#define DRCMRRXMODR DRCMR9
-#define DRCMRTXMODR DRCMR10
-#define DRCMRRXPCDR DRCMR11
-#define DRCMRTXPCDR DRCMR12
-#define DRCMRRXSSDR DRCMR13
-#define DRCMRTXSSDR DRCMR14
-#define DRCMRRXSS2DR DRCMR15
-#define DRCMRTXSS2DR DRCMR16
-#define DRCMRRXICDR DRCMR17
-#define DRCMRTXICDR DRCMR18
-#define DRCMRRXSTRBR DRCMR19
-#define DRCMRTXSTTHR DRCMR20
-#define DRCMRRXMMC DRCMR21
-#define DRCMRTXMMC DRCMR22
-#define DRCMRRXSS3DR DRCMR66
-#define DRCMRTXSS3DR DRCMR67
-#define DRCMRUDC(x) DRCMR((x) + 24)
-
#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */
-#define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */
-#define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */
-#define DTADR0 __REG(0x40000208) /* DMA Target Address Register Channel 0 */
-#define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */
-#define DDADR1 __REG(0x40000210) /* DMA Descriptor Address Register Channel 1 */
-#define DSADR1 __REG(0x40000214) /* DMA Source Address Register Channel 1 */
-#define DTADR1 __REG(0x40000218) /* DMA Target Address Register Channel 1 */
-#define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */
-#define DDADR2 __REG(0x40000220) /* DMA Descriptor Address Register Channel 2 */
-#define DSADR2 __REG(0x40000224) /* DMA Source Address Register Channel 2 */
-#define DTADR2 __REG(0x40000228) /* DMA Target Address Register Channel 2 */
-#define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */
-#define DDADR3 __REG(0x40000230) /* DMA Descriptor Address Register Channel 3 */
-#define DSADR3 __REG(0x40000234) /* DMA Source Address Register Channel 3 */
-#define DTADR3 __REG(0x40000238) /* DMA Target Address Register Channel 3 */
-#define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */
-#define DDADR4 __REG(0x40000240) /* DMA Descriptor Address Register Channel 4 */
-#define DSADR4 __REG(0x40000244) /* DMA Source Address Register Channel 4 */
-#define DTADR4 __REG(0x40000248) /* DMA Target Address Register Channel 4 */
-#define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */
-#define DDADR5 __REG(0x40000250) /* DMA Descriptor Address Register Channel 5 */
-#define DSADR5 __REG(0x40000254) /* DMA Source Address Register Channel 5 */
-#define DTADR5 __REG(0x40000258) /* DMA Target Address Register Channel 5 */
-#define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */
-#define DDADR6 __REG(0x40000260) /* DMA Descriptor Address Register Channel 6 */
-#define DSADR6 __REG(0x40000264) /* DMA Source Address Register Channel 6 */
-#define DTADR6 __REG(0x40000268) /* DMA Target Address Register Channel 6 */
-#define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */
-#define DDADR7 __REG(0x40000270) /* DMA Descriptor Address Register Channel 7 */
-#define DSADR7 __REG(0x40000274) /* DMA Source Address Register Channel 7 */
-#define DTADR7 __REG(0x40000278) /* DMA Target Address Register Channel 7 */
-#define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */
-#define DDADR8 __REG(0x40000280) /* DMA Descriptor Address Register Channel 8 */
-#define DSADR8 __REG(0x40000284) /* DMA Source Address Register Channel 8 */
-#define DTADR8 __REG(0x40000288) /* DMA Target Address Register Channel 8 */
-#define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */
-#define DDADR9 __REG(0x40000290) /* DMA Descriptor Address Register Channel 9 */
-#define DSADR9 __REG(0x40000294) /* DMA Source Address Register Channel 9 */
-#define DTADR9 __REG(0x40000298) /* DMA Target Address Register Channel 9 */
-#define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */
-#define DDADR10 __REG(0x400002a0) /* DMA Descriptor Address Register Channel 10 */
-#define DSADR10 __REG(0x400002a4) /* DMA Source Address Register Channel 10 */
-#define DTADR10 __REG(0x400002a8) /* DMA Target Address Register Channel 10 */
-#define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */
-#define DDADR11 __REG(0x400002b0) /* DMA Descriptor Address Register Channel 11 */
-#define DSADR11 __REG(0x400002b4) /* DMA Source Address Register Channel 11 */
-#define DTADR11 __REG(0x400002b8) /* DMA Target Address Register Channel 11 */
-#define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */
-#define DDADR12 __REG(0x400002c0) /* DMA Descriptor Address Register Channel 12 */
-#define DSADR12 __REG(0x400002c4) /* DMA Source Address Register Channel 12 */
-#define DTADR12 __REG(0x400002c8) /* DMA Target Address Register Channel 12 */
-#define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */
-#define DDADR13 __REG(0x400002d0) /* DMA Descriptor Address Register Channel 13 */
-#define DSADR13 __REG(0x400002d4) /* DMA Source Address Register Channel 13 */
-#define DTADR13 __REG(0x400002d8) /* DMA Target Address Register Channel 13 */
-#define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */
-#define DDADR14 __REG(0x400002e0) /* DMA Descriptor Address Register Channel 14 */
-#define DSADR14 __REG(0x400002e4) /* DMA Source Address Register Channel 14 */
-#define DTADR14 __REG(0x400002e8) /* DMA Target Address Register Channel 14 */
-#define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */
-#define DDADR15 __REG(0x400002f0) /* DMA Descriptor Address Register Channel 15 */
-#define DSADR15 __REG(0x400002f4) /* DMA Source Address Register Channel 15 */
-#define DTADR15 __REG(0x400002f8) /* DMA Target Address Register Channel 15 */
-#define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */
-
#define DDADR(x) __REG2(0x40000200, (x) << 4)
#define DSADR(x) __REG2(0x40000204, (x) << 4)
#define DTADR(x) __REG2(0x40000208, (x) << 4)
@@ -418,91 +265,13 @@
/*
- * I2C registers
+ * I2C registers - moved into drivers/i2c/busses/i2c-pxa.c
*/
-#define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */
-#define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */
-#define ICR __REG(0x40301690) /* I2C Control Register - ICR */
-#define ISR __REG(0x40301698) /* I2C Status Register - ISR */
-#define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */
-
-#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */
-#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */
-#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */
-#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */
-#define PWRISAR __REG(0x40f001A0) /*Power I2C Slave Address Register-ISAR */
-
-#define ICR_START (1 << 0) /* start bit */
-#define ICR_STOP (1 << 1) /* stop bit */
-#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */
-#define ICR_TB (1 << 3) /* transfer byte bit */
-#define ICR_MA (1 << 4) /* master abort */
-#define ICR_SCLE (1 << 5) /* master clock enable */
-#define ICR_IUE (1 << 6) /* unit enable */
-#define ICR_GCD (1 << 7) /* general call disable */
-#define ICR_ITEIE (1 << 8) /* enable tx interrupts */
-#define ICR_IRFIE (1 << 9) /* enable rx interrupts */
-#define ICR_BEIE (1 << 10) /* enable bus error ints */
-#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */
-#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */
-#define ICR_SADIE (1 << 13) /* slave address detected int enable */
-#define ICR_UR (1 << 14) /* unit reset */
-
-#define ISR_RWM (1 << 0) /* read/write mode */
-#define ISR_ACKNAK (1 << 1) /* ack/nak status */
-#define ISR_UB (1 << 2) /* unit busy */
-#define ISR_IBB (1 << 3) /* bus busy */
-#define ISR_SSD (1 << 4) /* slave stop detected */
-#define ISR_ALD (1 << 5) /* arbitration loss detected */
-#define ISR_ITE (1 << 6) /* tx buffer empty */
-#define ISR_IRF (1 << 7) /* rx buffer full */
-#define ISR_GCAD (1 << 8) /* general call address detected */
-#define ISR_SAD (1 << 9) /* slave address detected */
-#define ISR_BED (1 << 10) /* bus error no ACK/NAK */
-
-
/*
- * Serial Audio Controller
+ * Serial Audio Controller - moved into sound/soc/pxa/pxa2xx-i2s.c
*/
-#define SACR0 __REG(0x40400000) /* Global Control Register */
-#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */
-#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
-#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */
-#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */
-#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */
-#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */
-
-#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */
-#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */
-#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */
-#define SACR0_BCKD (1 << 2) /* Bit Clock Direction */
-#define SACR0_ENB (1 << 0) /* Enable I2S Link */
-#define SACR1_ENLBF (1 << 5) /* Enable Loopback */
-#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */
-#define SACR1_DREC (1 << 3) /* Disable Recording Function */
-#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */
-
-#define SASR0_I2SOFF (1 << 7) /* Controller Status */
-#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */
-#define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */
-#define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */
-#define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */
-#define SASR0_BSY (1 << 2) /* I2S Busy */
-#define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */
-#define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */
-
-#define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */
-#define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */
-
-#define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */
-#define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */
-#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */
-#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */
-
/*
* AC97 Controller registers
*/
@@ -989,77 +758,6 @@
#endif
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-/*
- * UHC: USB Host Controller (OHCI-like) register definitions
- */
-#define UHC_BASE_PHYS (0x4C000000)
-#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */
-#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */
-#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */
-#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */
-#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */
-#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */
-#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */
-#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */
-#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */
-#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */
-#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
-#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
-#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */
-#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */
-#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */
-#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */
-#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */
-#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */
-
-#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */
-#define UHCRHDA_NOCP (1 << 12) /* No over current protection */
-
-#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */
-#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */
-#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */
-#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */
-#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */
-
-#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */
-#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */
-#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/
-#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/
-#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */
-#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */
-#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */
-#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */
-#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */
-#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */
-
-#define UHCHR __REG(0x4C000064) /* UHC Reset Register */
-#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */
-#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */
-#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */
-#define UHCHR_PCPL (1 << 7) /* Power control polarity low */
-#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */
-#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */
-#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */
-#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */
-#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */
-#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */
-#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */
-
-#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/
-#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */
-#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */
-#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */
-#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */
-#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort
- Interrupt Enable*/
-#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */
-#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */
-
-#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */
-
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
-
/* PWRMODE register M field values */
#define PWRMODE_IDLE 0x1
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index 39eb68319e28..b1fcd10ab6c6 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -131,6 +131,28 @@
#define CKENB __REG(0x41340010) /* B Clock Enable Register */
#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */
+#define ACCR_XPDIS (1 << 31) /* Core PLL Output Disable */
+#define ACCR_SPDIS (1 << 30) /* System PLL Output Disable */
+#define ACCR_D0CS (1 << 26) /* D0 Mode Clock Select */
+#define ACCR_PCCE (1 << 11) /* Power Mode Change Clock Enable */
+#define ACCR_DDR_D0CS (1 << 7) /* DDR SDRAM clock frequency in D0CS (PXA31x only) */
+
+#define ACCR_SMCFS_MASK (0x7 << 23) /* Static Memory Controller Frequency Select */
+#define ACCR_SFLFS_MASK (0x3 << 18) /* Frequency Select for Internal Memory Controller */
+#define ACCR_XSPCLK_MASK (0x3 << 16) /* Core Frequency during Frequency Change */
+#define ACCR_HSS_MASK (0x3 << 14) /* System Bus-Clock Frequency Select */
+#define ACCR_DMCFS_MASK (0x3 << 12) /* Dynamic Memory Controller Clock Frequency Select */
+#define ACCR_XN_MASK (0x7 << 8) /* Core PLL Turbo-Mode-to-Run-Mode Ratio */
+#define ACCR_XL_MASK (0x1f) /* Core PLL Run-Mode-to-Oscillator Ratio */
+
+#define ACCR_SMCFS(x) (((x) & 0x7) << 23)
+#define ACCR_SFLFS(x) (((x) & 0x3) << 18)
+#define ACCR_XSPCLK(x) (((x) & 0x3) << 16)
+#define ACCR_HSS(x) (((x) & 0x3) << 14)
+#define ACCR_DMCFS(x) (((x) & 0x3) << 12)
+#define ACCR_XN(x) (((x) & 0x7) << 8)
+#define ACCR_XL(x) ((x) & 0x1f)
+
/*
* Clock Enable Bit
*/
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index bd14365f7ed5..31ac26b55bc1 100644
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -16,6 +16,7 @@
#endif
#include <linux/fb.h>
+#include <linux/gpio.h>
/* Spitz/Akita GPIOs */
@@ -100,13 +101,24 @@
#define SPITZ_SCP_JK_A SCOOP_GPCR_PA18 /* Low */
#define SPITZ_SCP_ADC_TEMP_ON SCOOP_GPCR_PA19 /* Low */
-#define SPITZ_SCP_IO_DIR (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
- SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \
+#define SPITZ_SCP_IO_DIR (SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
+ SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | \
SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
#define SPITZ_SCP_IO_OUT (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
#define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
#define SPITZ_SCP_SUS_SET 0
+#define SPITZ_SCP_GPIO_BASE (NR_BUILTIN_GPIO)
+#define SPITZ_GPIO_LED_GREEN (SPITZ_SCP_GPIO_BASE + 0)
+#define SPITZ_GPIO_JK_B (SPITZ_SCP_GPIO_BASE + 1)
+#define SPITZ_GPIO_CHRG_ON (SPITZ_SCP_GPIO_BASE + 2)
+#define SPITZ_GPIO_MUTE_L (SPITZ_SCP_GPIO_BASE + 3)
+#define SPITZ_GPIO_MUTE_R (SPITZ_SCP_GPIO_BASE + 4)
+#define SPITZ_GPIO_CF_POWER (SPITZ_SCP_GPIO_BASE + 5)
+#define SPITZ_GPIO_LED_ORANGE (SPITZ_SCP_GPIO_BASE + 6)
+#define SPITZ_GPIO_JK_A (SPITZ_SCP_GPIO_BASE + 7)
+#define SPITZ_GPIO_ADC_TEMP_ON (SPITZ_SCP_GPIO_BASE + 8)
+
/* Spitz Scoop Device (No. 2) GPIOs */
/* Suspend States in comments */
#define SPITZ_SCP2_IR_ON SCOOP_GPCR_PA11 /* High */
@@ -119,15 +131,36 @@
#define SPITZ_SCP2_BACKLIGHT_ON SCOOP_GPCR_PA18 /* Low */
#define SPITZ_SCP2_MIC_BIAS SCOOP_GPCR_PA19 /* Low */
-#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
+#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
-#define SPITZ_SCP2_IO_OUT (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
+#define SPITZ_SCP2_IO_OUT (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
#define SPITZ_SCP2_SUS_CLR (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
#define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
+#define SPITZ_SCP2_GPIO_BASE (NR_BUILTIN_GPIO + 12)
+#define SPITZ_GPIO_IR_ON (SPITZ_SCP2_GPIO_BASE + 0)
+#define SPITZ_GPIO_AKIN_PULLUP (SPITZ_SCP2_GPIO_BASE + 1
+#define SPITZ_GPIO_RESERVED_1 (SPITZ_SCP2_GPIO_BASE + 2)
+#define SPITZ_GPIO_RESERVED_2 (SPITZ_SCP2_GPIO_BASE + 3)
+#define SPITZ_GPIO_RESERVED_3 (SPITZ_SCP2_GPIO_BASE + 4)
+#define SPITZ_GPIO_RESERVED_4 (SPITZ_SCP2_GPIO_BASE + 5)
+#define SPITZ_GPIO_BACKLIGHT_CONT (SPITZ_SCP2_GPIO_BASE + 6)
+#define SPITZ_GPIO_BACKLIGHT_ON (SPITZ_SCP2_GPIO_BASE + 7)
+#define SPITZ_GPIO_MIC_BIAS (SPITZ_SCP2_GPIO_BASE + 8)
+
+/* Akita IO Expander GPIOs */
+#define AKITA_IOEXP_GPIO_BASE (NR_BUILTIN_GPIO + 12)
+#define AKITA_GPIO_RESERVED_0 (AKITA_IOEXP_GPIO_BASE + 0)
+#define AKITA_GPIO_RESERVED_1 (AKITA_IOEXP_GPIO_BASE + 1)
+#define AKITA_GPIO_MIC_BIAS (AKITA_IOEXP_GPIO_BASE + 2)
+#define AKITA_GPIO_BACKLIGHT_ON (AKITA_IOEXP_GPIO_BASE + 3)
+#define AKITA_GPIO_BACKLIGHT_CONT (AKITA_IOEXP_GPIO_BASE + 4)
+#define AKITA_GPIO_AKIN_PULLUP (AKITA_IOEXP_GPIO_BASE + 5)
+#define AKITA_GPIO_IR_ON (AKITA_IOEXP_GPIO_BASE + 6)
+#define AKITA_GPIO_RESERVED_7 (AKITA_IOEXP_GPIO_BASE + 7)
/* Spitz IRQ Definitions */
@@ -154,5 +187,4 @@
*/
extern struct platform_device spitzscoop_device;
extern struct platform_device spitzscoop2_device;
-extern struct platform_device spitzssp_device;
extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
diff --git a/arch/arm/mach-pxa/include/mach/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h
index a012882c9ee6..cb5cb766f0f1 100644
--- a/arch/arm/mach-pxa/include/mach/ssp.h
+++ b/arch/arm/mach-pxa/include/mach/ssp.h
@@ -20,6 +20,7 @@
#define __ASM_ARCH_SSP_H
#include <linux/list.h>
+#include <linux/io.h>
enum pxa_ssp_type {
SSP_UNDEFINED = 0,
@@ -78,6 +79,29 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags);
int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed);
void ssp_exit(struct ssp_dev *dev);
+/**
+ * ssp_write_reg - Write to a SSP register
+ *
+ * @dev: SSP device to access
+ * @reg: Register to write to
+ * @val: Value to be written.
+ */
+static inline void ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
+{
+ __raw_writel(val, dev->mmio_base + reg);
+}
+
+/**
+ * ssp_read_reg - Read from a SSP register
+ *
+ * @dev: SSP device to access
+ * @reg: Register to read from
+ */
+static inline u32 ssp_read_reg(struct ssp_device *dev, u32 reg)
+{
+ return __raw_readl(dev->mmio_base + reg);
+}
+
struct ssp_device *ssp_request(int port, const char *label);
void ssp_free(struct ssp_device *);
#endif /* __ASM_ARCH_SSP_H */
diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
index 641d0ec110bb..903e1a2e6641 100644
--- a/arch/arm/mach-pxa/include/mach/trizeps4.h
+++ b/arch/arm/mach-pxa/include/mach/trizeps4.h
@@ -17,11 +17,16 @@
#define TRIZEPS4_PIC_PHYS (PXA_CS3_PHYS) /* Logic chip on ConXS-Board */
#define TRIZEPS4_SDRAM_BASE 0xa0000000 /* SDRAM region */
-#define TRIZEPS4_CFSR_PHYS (PXA_CS3_PHYS) /* Logic chip on ConXS-Board CSFR register */
-#define TRIZEPS4_BOCR_PHYS (PXA_CS3_PHYS+0x02000000) /* Logic chip on ConXS-Board BOCR register */
-#define TRIZEPS4_IRCR_PHYS (PXA_CS3_PHYS+0x02400000) /* Logic chip on ConXS-Board IRCR register*/
-#define TRIZEPS4_UPSR_PHYS (PXA_CS3_PHYS+0x02800000) /* Logic chip on ConXS-Board UPSR register*/
-#define TRIZEPS4_DICR_PHYS (PXA_CS3_PHYS+0x03800000) /* Logic chip on ConXS-Board DICR register*/
+ /* Logic on ConXS-board CSFR register*/
+#define TRIZEPS4_CFSR_PHYS (PXA_CS3_PHYS)
+ /* Logic on ConXS-board BOCR register*/
+#define TRIZEPS4_BOCR_PHYS (PXA_CS3_PHYS+0x02000000)
+ /* Logic on ConXS-board IRCR register*/
+#define TRIZEPS4_IRCR_PHYS (PXA_CS3_PHYS+0x02400000)
+ /* Logic on ConXS-board UPSR register*/
+#define TRIZEPS4_UPSR_PHYS (PXA_CS3_PHYS+0x02800000)
+ /* Logic on ConXS-board DICR register*/
+#define TRIZEPS4_DICR_PHYS (PXA_CS3_PHYS+0x03800000)
/* virtual memory regions */
#define TRIZEPS4_DISK_VIRT 0xF0000000 /* Disk On Chip region */
@@ -54,6 +59,15 @@
#define GPIO_MMC_DET 12
#define TRIZEPS4_MMC_IRQ IRQ_GPIO(GPIO_MMC_DET)
+/* DOC NAND chip */
+#define GPIO_DOC_LOCK 94
+#define GPIO_DOC_IRQ 93
+#define TRIZEPS4_DOC_IRQ IRQ_GPIO(GPIO_DOC_IRQ)
+
+/* SPI interface */
+#define GPIO_SPI 53
+#define TRIZEPS4_SPI_IRQ IRQ_GPIO(GPIO_SPI)
+
/* LEDS using tx2 / rx2 */
#define GPIO_SYS_BUSY_LED 46
#define GPIO_HEARTBEAT_LED 47
@@ -62,24 +76,66 @@
#define GPIO_PIC 0
#define TRIZEPS4_PIC_IRQ IRQ_GPIO(GPIO_PIC)
-#define CFSR_P2V(x) ((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
-#define CFSR_V2P(x) ((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
+#ifdef CONFIG_MACH_TRIZEPS_CONXS
+/* for CONXS base board define these registers */
+#define CFSR_P2V(x) ((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
+#define CFSR_V2P(x) ((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
-#define BCR_P2V(x) ((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
-#define BCR_V2P(x) ((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
+#define BCR_P2V(x) ((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
+#define BCR_V2P(x) ((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
-#define DCR_P2V(x) ((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
-#define DCR_V2P(x) ((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
+#define DCR_P2V(x) ((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
+#define DCR_V2P(x) ((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
+
+#define IRCR_P2V(x) ((x) - TRIZEPS4_IRCR_PHYS + TRIZEPS4_IRCR_VIRT)
+#define IRCR_V2P(x) ((x) - TRIZEPS4_IRCR_VIRT + TRIZEPS4_IRCR_PHYS)
#ifndef __ASSEMBLY__
-#define ConXS_CFSR (*((volatile unsigned short *)CFSR_P2V(0x0C000000)))
-#define ConXS_BCR (*((volatile unsigned short *)BCR_P2V(0x0E000000)))
-#define ConXS_DCR (*((volatile unsigned short *)DCR_P2V(0x0F800000)))
+static inline unsigned short CFSR_readw(void)
+{
+ /* [Compact Flash Status Register] is read only */
+ return *((unsigned short *)CFSR_P2V(0x0C000000));
+}
+static inline void BCR_writew(unsigned short value)
+{
+ /* [Board Control Regsiter] is write only */
+ *((unsigned short *)BCR_P2V(0x0E000000)) = value;
+}
+static inline void DCR_writew(unsigned short value)
+{
+ /* [Display Control Register] is write only */
+ *((unsigned short *)DCR_P2V(0x0E000000)) = value;
+}
+static inline void IRCR_writew(unsigned short value)
+{
+ /* [InfraRed data Control Register] is write only */
+ *((unsigned short *)IRCR_P2V(0x0E000000)) = value;
+}
#else
#define ConXS_CFSR CFSR_P2V(0x0C000000)
#define ConXS_BCR BCR_P2V(0x0E000000)
#define ConXS_DCR DCR_P2V(0x0F800000)
+#define ConXS_IRCR IRCR_P2V(0x0F800000)
#endif
+#else
+/* for whatever baseboard define function registers */
+static inline unsigned short CFSR_readw(void)
+{
+ return 0;
+}
+static inline void BCR_writew(unsigned short value)
+{
+ ;
+}
+static inline void DCR_writew(unsigned short value)
+{
+ ;
+}
+static inline void IRCR_writew(unsigned short value)
+{
+ ;
+}
+#endif /* CONFIG_MACH_TRIZEPS_CONXS */
#define ConXS_CFSR_BVD_MASK 0x0003
#define ConXS_CFSR_BVD1 (1 << 0)
diff --git a/arch/arm/mach-pxa/include/mach/viper.h b/arch/arm/mach-pxa/include/mach/viper.h
new file mode 100644
index 000000000000..10988c270ca3
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/viper.h
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-pxa/include/mach/viper.h
+ *
+ * Author: Ian Campbell
+ * Created: Feb 03, 2003
+ * Copyright: Arcom Control Systems.
+ *
+ * Maintained by Marc Zyngier <maz@misterjones.org>
+ * <marc.zyngier@altran.com>
+ *
+ * Created based on lubbock.h:
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_VIPER_H
+#define ARCH_VIPER_H
+
+#define VIPER_BOOT_PHYS PXA_CS0_PHYS
+#define VIPER_FLASH_PHYS PXA_CS1_PHYS
+#define VIPER_ETH_PHYS PXA_CS2_PHYS
+#define VIPER_USB_PHYS PXA_CS3_PHYS
+#define VIPER_ETH_DATA_PHYS PXA_CS4_PHYS
+#define VIPER_CPLD_PHYS PXA_CS5_PHYS
+
+#define VIPER_CPLD_BASE (0xf0000000)
+#define VIPER_PC104IO_BASE (0xf1000000)
+#define VIPER_USB_BASE (0xf1800000)
+
+#define VIPER_ETH_GPIO (0)
+#define VIPER_CPLD_GPIO (1)
+#define VIPER_USB_GPIO (2)
+#define VIPER_UARTA_GPIO (4)
+#define VIPER_UARTB_GPIO (3)
+#define VIPER_CF_CD_GPIO (32)
+#define VIPER_CF_RDY_GPIO (8)
+#define VIPER_BCKLIGHT_EN_GPIO (9)
+#define VIPER_LCD_EN_GPIO (10)
+#define VIPER_PSU_DATA_GPIO (6)
+#define VIPER_PSU_CLK_GPIO (11)
+#define VIPER_UART_SHDN_GPIO (12)
+#define VIPER_BRIGHTNESS_GPIO (16)
+#define VIPER_PSU_nCS_LD_GPIO (19)
+#define VIPER_UPS_GPIO (20)
+#define VIPER_CF_POWER_GPIO (82)
+#define VIPER_TPM_I2C_SDA_GPIO (26)
+#define VIPER_TPM_I2C_SCL_GPIO (27)
+#define VIPER_RTC_I2C_SDA_GPIO (83)
+#define VIPER_RTC_I2C_SCL_GPIO (84)
+
+#define VIPER_CPLD_P2V(x) ((x) - VIPER_CPLD_PHYS + VIPER_CPLD_BASE)
+#define VIPER_CPLD_V2P(x) ((x) - VIPER_CPLD_BASE + VIPER_CPLD_PHYS)
+
+#ifndef __ASSEMBLY__
+# define __VIPER_CPLD_REG(x) (*((volatile u16 *)VIPER_CPLD_P2V(x)))
+#endif
+
+/* board level registers in the CPLD: (offsets from CPLD_BASE) ... */
+
+/* ... Physical addresses */
+#define _VIPER_LO_IRQ_STATUS (VIPER_CPLD_PHYS + 0x100000)
+#define _VIPER_ICR_PHYS (VIPER_CPLD_PHYS + 0x100002)
+#define _VIPER_HI_IRQ_STATUS (VIPER_CPLD_PHYS + 0x100004)
+#define _VIPER_VERSION_PHYS (VIPER_CPLD_PHYS + 0x100006)
+#define VIPER_UARTA_PHYS (VIPER_CPLD_PHYS + 0x300010)
+#define VIPER_UARTB_PHYS (VIPER_CPLD_PHYS + 0x300000)
+#define _VIPER_SRAM_BASE (VIPER_CPLD_PHYS + 0x800000)
+
+/* ... Virtual addresses */
+#define VIPER_LO_IRQ_STATUS __VIPER_CPLD_REG(_VIPER_LO_IRQ_STATUS)
+#define VIPER_HI_IRQ_STATUS __VIPER_CPLD_REG(_VIPER_HI_IRQ_STATUS)
+#define VIPER_VERSION __VIPER_CPLD_REG(_VIPER_VERSION_PHYS)
+#define VIPER_ICR __VIPER_CPLD_REG(_VIPER_ICR_PHYS)
+
+/* Decode VIPER_VERSION register */
+#define VIPER_CPLD_REVISION(x) (((x) >> 5) & 0x7)
+#define VIPER_BOARD_VERSION(x) (((x) >> 3) & 0x3)
+#define VIPER_BOARD_ISSUE(x) (((x) >> 0) & 0x7)
+
+/* Interrupt and Configuration Register (VIPER_ICR) */
+/* This is a write only register. Only CF_RST is used under Linux */
+
+extern void viper_cf_rst(int state);
+
+#define VIPER_ICR_RETRIG (1 << 0)
+#define VIPER_ICR_AUTO_CLR (1 << 1)
+#define VIPER_ICR_R_DIS (1 << 2)
+#define VIPER_ICR_CF_RST (1 << 3)
+
+#endif
+
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 5e95c5372fec..fa69c3a6a38e 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -57,7 +57,7 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
pxa_internal_irq_nr = irq_nr;
- for (irq = 0; irq < irq_nr; irq += 32) {
+ for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) {
_ICMR(irq) = 0; /* disable all IRQs */
_ICLR(irq) = 0; /* all IRQs are IRQ, not FIQ */
}
diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c
deleted file mode 100644
index 3bc29007df3a..000000000000
--- a/arch/arm/mach-pxa/leds-trizeps4.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-trizeps4.c
- *
- * Author: Jürgen Schindele
- * Created: 20 02, 2006
- * Copyright: Jürgen Schindele
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/types.h>
-#include <asm/leds.h>
-
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
-#include <mach/trizeps4.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-#define SYS_BUSY 0x01
-#define HEARTBEAT 0x02
-#define BLINK 0x04
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void trizeps4_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = 0;
- pxa_gpio_mode( GPIO_SYS_BUSY_LED | GPIO_OUT); /* LED1 */
- pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT); /* LED2 */
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- hw_led_state ^= HEARTBEAT;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- hw_led_state &= ~SYS_BUSY;
- break;
-
- case led_idle_end:
- hw_led_state |= SYS_BUSY;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- hw_led_state |= BLINK;
- break;
-
- case led_green_off:
- hw_led_state &= ~BLINK;
- break;
-
- case led_amber_on:
- break;
-
- case led_amber_off:
- break;
-
- case led_red_on:
- break;
-
- case led_red_off:
- break;
-
- default:
- break;
- }
-
- if (led_state & LED_STATE_ENABLED) {
- switch (hw_led_state) {
- case 0:
- GPSR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
- GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
- break;
- case 1:
- GPCR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
- GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
- break;
- case 2:
- GPSR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
- GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
- break;
- case 3:
- GPCR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
- GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
- break;
- }
- }
- else {
- /* turn all off */
- GPSR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
- GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
- }
-
- local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds.c b/arch/arm/mach-pxa/leds.c
index e13eb841e48d..bbe4d5f6afaa 100644
--- a/arch/arm/mach-pxa/leds.c
+++ b/arch/arm/mach-pxa/leds.c
@@ -24,8 +24,6 @@ pxa_leds_init(void)
leds_event = mainstone_leds_event;
if (machine_is_pxa_idp())
leds_event = idp_leds_event;
- if (machine_is_trizeps4())
- leds_event = trizeps4_leds_event;
leds_event(led_start);
return 0;
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 58f3402a0375..b4d00aba0e31 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -20,6 +20,7 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/spi/spi.h>
#include <linux/smc91x.h>
#include <asm/types.h>
@@ -38,6 +39,7 @@
#include <mach/gpio.h>
#include <mach/pxafb.h>
#include <mach/ssp.h>
+#include <mach/pxa2xx_spi.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxa3xx_nand.h>
#include <mach/littleton.h>
@@ -72,8 +74,8 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
/* SSP2 */
GPIO25_SSP2_SCLK,
- GPIO17_SSP2_FRM,
GPIO27_SSP2_TXD,
+ GPIO17_GPIO, /* SFRM as chip-select */
/* Debug Ethernet */
GPIO90_GPIO,
@@ -123,160 +125,6 @@ static struct platform_device smc91x_device = {
};
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-/* use bit 30, 31 as the indicator of command parameter number */
-#define CMD0(x) ((0x00000000) | ((x) << 9))
-#define CMD1(x, x1) ((0x40000000) | ((x) << 9) | 0x100 | (x1))
-#define CMD2(x, x1, x2) ((0x80000000) | ((x) << 18) | 0x20000 |\
- ((x1) << 9) | 0x100 | (x2))
-
-static uint32_t lcd_panel_reset[] = {
- CMD0(0x1), /* reset */
- CMD0(0x0), /* nop */
- CMD0(0x0), /* nop */
- CMD0(0x0), /* nop */
-};
-
-static uint32_t lcd_panel_on[] = {
- CMD0(0x29), /* Display ON */
- CMD2(0xB8, 0xFF, 0xF9), /* Output Control */
- CMD0(0x11), /* Sleep out */
- CMD1(0xB0, 0x16), /* Wake */
-};
-
-static uint32_t lcd_panel_off[] = {
- CMD0(0x28), /* Display OFF */
- CMD2(0xB8, 0x80, 0x02), /* Output Control */
- CMD0(0x10), /* Sleep in */
- CMD1(0xB0, 0x00), /* Deep stand by in */
-};
-
-static uint32_t lcd_vga_pass_through[] = {
- CMD1(0xB0, 0x16),
- CMD1(0xBC, 0x80),
- CMD1(0xE1, 0x00),
- CMD1(0x36, 0x50),
- CMD1(0x3B, 0x00),
-};
-
-static uint32_t lcd_qvga_pass_through[] = {
- CMD1(0xB0, 0x16),
- CMD1(0xBC, 0x81),
- CMD1(0xE1, 0x00),
- CMD1(0x36, 0x50),
- CMD1(0x3B, 0x22),
-};
-
-static uint32_t lcd_vga_transfer[] = {
- CMD1(0xcf, 0x02), /* Blanking period control (1) */
- CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */
- CMD1(0xd1, 0x01), /* CKV timing control on/off */
- CMD2(0xd2, 0x14, 0x00), /* CKV 1,2 timing control */
- CMD2(0xd3, 0x1a, 0x0f), /* OEV timing control */
- CMD2(0xd4, 0x1f, 0xaf), /* ASW timing control (1) */
- CMD1(0xd5, 0x14), /* ASW timing control (2) */
- CMD0(0x21), /* Invert for normally black display */
- CMD0(0x29), /* Display on */
-};
-
-static uint32_t lcd_qvga_transfer[] = {
- CMD1(0xd6, 0x02), /* Blanking period control (1) */
- CMD2(0xd7, 0x08, 0x04), /* Blanking period control (2) */
- CMD1(0xd8, 0x01), /* CKV timing control on/off */
- CMD2(0xd9, 0x00, 0x08), /* CKV 1,2 timing control */
- CMD2(0xde, 0x05, 0x0a), /* OEV timing control */
- CMD2(0xdf, 0x0a, 0x19), /* ASW timing control (1) */
- CMD1(0xe0, 0x0a), /* ASW timing control (2) */
- CMD0(0x21), /* Invert for normally black display */
- CMD0(0x29), /* Display on */
-};
-
-static uint32_t lcd_panel_config[] = {
- CMD2(0xb8, 0xff, 0xf9), /* Output control */
- CMD0(0x11), /* sleep out */
- CMD1(0xba, 0x01), /* Display mode (1) */
- CMD1(0xbb, 0x00), /* Display mode (2) */
- CMD1(0x3a, 0x60), /* Display mode 18-bit RGB */
- CMD1(0xbf, 0x10), /* Drive system change control */
- CMD1(0xb1, 0x56), /* Booster operation setup */
- CMD1(0xb2, 0x33), /* Booster mode setup */
- CMD1(0xb3, 0x11), /* Booster frequency setup */
- CMD1(0xb4, 0x02), /* Op amp/system clock */
- CMD1(0xb5, 0x35), /* VCS voltage */
- CMD1(0xb6, 0x40), /* VCOM voltage */
- CMD1(0xb7, 0x03), /* External display signal */
- CMD1(0xbd, 0x00), /* ASW slew rate */
- CMD1(0xbe, 0x00), /* Dummy data for QuadData operation */
- CMD1(0xc0, 0x11), /* Sleep out FR count (A) */
- CMD1(0xc1, 0x11), /* Sleep out FR count (B) */
- CMD1(0xc2, 0x11), /* Sleep out FR count (C) */
- CMD2(0xc3, 0x20, 0x40), /* Sleep out FR count (D) */
- CMD2(0xc4, 0x60, 0xc0), /* Sleep out FR count (E) */
- CMD2(0xc5, 0x10, 0x20), /* Sleep out FR count (F) */
- CMD1(0xc6, 0xc0), /* Sleep out FR count (G) */
- CMD2(0xc7, 0x33, 0x43), /* Gamma 1 fine tuning (1) */
- CMD1(0xc8, 0x44), /* Gamma 1 fine tuning (2) */
- CMD1(0xc9, 0x33), /* Gamma 1 inclination adjustment */
- CMD1(0xca, 0x00), /* Gamma 1 blue offset adjustment */
- CMD2(0xec, 0x01, 0xf0), /* Horizontal clock cycles */
-};
-
-static void ssp_reconfig(struct ssp_dev *dev, int nparam)
-{
- static int last_nparam = -1;
-
- /* check if it is necessary to re-config SSP */
- if (nparam == last_nparam)
- return;
-
- ssp_disable(dev);
- ssp_config(dev, (nparam == 2) ? 0x0010058a : 0x00100581, 0x18, 0, 0);
-
- last_nparam = nparam;
-}
-
-static void ssp_send_cmd(uint32_t *cmd, int num)
-{
- static int ssp_initialized;
- static struct ssp_dev ssp2;
-
- int i;
-
- if (!ssp_initialized) {
- ssp_init(&ssp2, 2, SSP_NO_IRQ);
- ssp_initialized = 1;
- }
-
- clk_enable(ssp2.ssp->clk);
- for (i = 0; i < num; i++, cmd++) {
- ssp_reconfig(&ssp2, (*cmd >> 30) & 0x3);
- ssp_write_word(&ssp2, *cmd & 0x3fffffff);
-
- /* FIXME: ssp_flush() is mandatory here to work */
- ssp_flush(&ssp2);
- }
- clk_disable(ssp2.ssp->clk);
-}
-
-static void littleton_lcd_power(int on, struct fb_var_screeninfo *var)
-{
- if (on) {
- ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_on));
- ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_reset));
- if (var->xres > 240) {
- /* VGA */
- ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_pass_through));
- ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
- ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_transfer));
- } else {
- /* QVGA */
- ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_pass_through));
- ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
- ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_transfer));
- }
- } else
- ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_off));
-}
-
static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
[0] = {
/* VGA */
@@ -312,7 +160,6 @@ static struct pxafb_mach_info littleton_lcd_info = {
.modes = tpo_tdo24mtea1_modes,
.num_modes = 2,
.lcd_conn = LCD_COLOR_TFT_16BPP,
- .pxafb_lcd_power = littleton_lcd_power,
};
static void littleton_init_lcd(void)
@@ -323,6 +170,51 @@ static void littleton_init_lcd(void)
static inline void littleton_init_lcd(void) {};
#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master littleton_spi_info = {
+ .num_chipselect = 1,
+};
+
+static void littleton_tdo24m_cs(u32 cmd)
+{
+ gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
+ .rx_threshold = 1,
+ .tx_threshold = 1,
+ .cs_control = littleton_tdo24m_cs,
+};
+
+static struct spi_board_info littleton_spi_devices[] __initdata = {
+ {
+ .modalias = "tdo24m",
+ .max_speed_hz = 1000000,
+ .bus_num = 2,
+ .chip_select = 0,
+ .controller_data= &littleton_tdo24m_chip,
+ },
+};
+
+static void __init littleton_init_spi(void)
+{
+ int err;
+
+ err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS");
+ if (err) {
+ pr_warning("failed to request GPIO for LCS CS\n");
+ return;
+ }
+
+ gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1);
+
+ pxa2xx_set_spi_info(2, &littleton_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
+}
+#else
+static inline void littleton_init_spi(void) {}
+#endif
+
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int littleton_matrix_key_map[] = {
/* KEY(row, col, key_code) */
@@ -433,6 +325,7 @@ static void __init littleton_init(void)
*/
platform_device_register(&smc91x_device);
+ littleton_init_spi();
littleton_init_lcd();
littleton_init_keypad();
littleton_init_nand();
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index b7038948d1d4..de3f67daaacf 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -40,7 +40,7 @@
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
#include <mach/lpd270.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
@@ -51,6 +51,43 @@
#include "generic.h"
#include "devices.h"
+static unsigned long lpd270_pin_config[] __initdata = {
+ /* Chip Selects */
+ GPIO15_nCS_1, /* Mainboard Flash */
+ GPIO78_nCS_2, /* CPLD + Ethernet */
+
+ /* LCD - 16bpp Active TFT */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+ GPIO16_PWM0_OUT, /* Backlight */
+
+ /* USB Host */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+
+ /* AC97 */
+ GPIO45_AC97_SYSCLK,
+
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+};
static unsigned int lpd270_irq_enabled;
@@ -88,8 +125,7 @@ static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
GEDR(0) = GPIO_bit(0); /* clear useless edge notification */
if (likely(pending)) {
irq = LPD270_IRQ(0) + __ffs(pending);
- desc = irq_desc + irq;
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
pending = __raw_readw(LPD270_INT_STATUS) &
lpd270_irq_enabled;
@@ -265,8 +301,8 @@ static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
static struct pxafb_mach_info sharp_lq057q3dc02 = {
.modes = &sharp_lq057q3dc02_mode,
.num_modes = 1,
- .lccr0 = 0x07800080,
- .lccr3 = 0x00400000,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
};
/* 12.1" TFT SVGA (LoLo display number 2) */
@@ -287,8 +323,8 @@ static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
static struct pxafb_mach_info sharp_lq121s1dg31 = {
.modes = &sharp_lq121s1dg31_mode,
.num_modes = 1,
- .lccr0 = 0x07800080,
- .lccr3 = 0x00400000,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
};
/* 3.6" TFT QVGA (LoLo display number 3) */
@@ -309,8 +345,8 @@ static struct pxafb_mode_info sharp_lq036q1da01_mode = {
static struct pxafb_mach_info sharp_lq036q1da01 = {
.modes = &sharp_lq036q1da01_mode,
.num_modes = 1,
- .lccr0 = 0x07800080,
- .lccr3 = 0x00400000,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
};
/* 6.4" TFT VGA (LoLo display number 5) */
@@ -331,8 +367,8 @@ static struct pxafb_mode_info sharp_lq64d343_mode = {
static struct pxafb_mach_info sharp_lq64d343 = {
.modes = &sharp_lq64d343_mode,
.num_modes = 1,
- .lccr0 = 0x07800080,
- .lccr3 = 0x00400000,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
};
/* 10.4" TFT VGA (LoLo display number 7) */
@@ -353,8 +389,8 @@ static struct pxafb_mode_info sharp_lq10d368_mode = {
static struct pxafb_mach_info sharp_lq10d368 = {
.modes = &sharp_lq10d368_mode,
.num_modes = 1,
- .lccr0 = 0x07800080,
- .lccr3 = 0x00400000,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
};
/* 3.5" TFT QVGA (LoLo display number 8) */
@@ -375,8 +411,8 @@ static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
static struct pxafb_mach_info sharp_lq035q7db02_20 = {
.modes = &sharp_lq035q7db02_20_mode,
.num_modes = 1,
- .lccr0 = 0x07800080,
- .lccr3 = 0x00400000,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
};
static struct pxafb_mach_info *lpd270_lcd_to_use;
@@ -411,27 +447,15 @@ static struct platform_device *platform_devices[] __initdata = {
&lpd270_flash_device[1],
};
-static int lpd270_ohci_init(struct device *dev)
-{
- /* setup Port1 GPIO pin. */
- pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */
- pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */
-
- /* Set the Power Control Polarity Low and Power Sense
- Polarity Low to active low. */
- UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
- ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-
- return 0;
-}
-
static struct pxaohci_platform_data lpd270_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
- .init = lpd270_ohci_init,
+ .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
};
static void __init lpd270_init(void)
{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
+
lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
lpd270_flash_data[1].width = 4;
@@ -442,12 +466,6 @@ static void __init lpd270_init(void)
*/
ARB_CNTRL = ARB_CORE_PARK | 0x234;
- /*
- * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45.
- */
- pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
- pxa_gpio_mode(GPIO16_PWM0_MD);
-
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
pxa_set_ac97_info(NULL);
@@ -473,15 +491,6 @@ static void __init lpd270_map_io(void)
pxa_map_io();
iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
- /* initialize sleep mode regs (wake-up sources, etc) */
- PGSR0 = 0x00008800;
- PGSR1 = 0x00000002;
- PGSR2 = 0x0001FC00;
- PGSR3 = 0x00001F81;
- PWER = 0xC0000002;
- PRER = 0x00000002;
- PFER = 0x00000002;
-
/* for use I SRAM as framebuffer. */
PSLR |= 0x00000F04;
PCFR = 0x00000066;
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 4ffdff2d9ff1..bff704354c1a 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -57,13 +57,36 @@
static unsigned long lubbock_pin_config[] __initdata = {
GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO78_nCS_2, /* CS2 - Baseboard FGPA */
GPIO79_nCS_3, /* CS3 - SMC ethernet */
+ GPIO80_nCS_4, /* CS4 - SA1111 */
/* SSP data pins */
GPIO23_SSP1_SCLK,
GPIO25_SSP1_TXD,
GPIO26_SSP1_RXD,
+ /* LCD - 16bpp DSTN */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
@@ -132,8 +155,7 @@ static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
GEDR(0) = GPIO_bit(0); /* clear our parent irq */
if (likely(pending)) {
irq = LUBBOCK_IRQ(0) + __ffs(pending);
- desc = irq_desc + irq;
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
}
pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
} while (pending);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 143f28adaf95..519138bc5f85 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -409,7 +409,7 @@ static struct platform_device backlight = {
* LEDs
*/
-struct gpio_led gpio_leds[] = {
+static struct gpio_led gpio_leds[] = {
{
.name = "magician::vibra",
.default_trigger = "none",
@@ -669,18 +669,10 @@ static struct pxamci_platform_data magician_mci_info = {
* USB OHCI
*/
-static int magician_ohci_init(struct device *dev)
-{
- UHCHR = (UHCHR | UHCHR_SSEP2 | UHCHR_PCPL | UHCHR_CGR) &
- ~(UHCHR_SSEP1 | UHCHR_SSEP3 | UHCHR_SSE);
-
- return 0;
-}
-
static struct pxaohci_platform_data magician_ohci_info = {
- .port_mode = PMM_PERPORT_MODE,
- .init = magician_ohci_init,
- .power_budget = 0,
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW,
+ .power_budget = 0,
};
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index d44af761564d..f2c7ad8f2b6b 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -162,8 +162,7 @@ static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
GEDR(0) = GPIO_bit(0); /* clear useless edge notification */
if (likely(pending)) {
irq = MAINSTONE_IRQ(0) + __ffs(pending);
- desc = irq_desc + irq;
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
}
pending = MST_INTSETCLR & mainstone_irq_enabled;
} while (pending);
@@ -508,19 +507,9 @@ static struct platform_device *platform_devices[] __initdata = {
&mst_gpio_keys_device,
};
-static int mainstone_ohci_init(struct device *dev)
-{
- /* Set the Power Control Polarity Low and Power Sense
- Polarity Low to active low. */
- UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
- ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-
- return 0;
-}
-
static struct pxaohci_platform_data mainstone_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
- .init = mainstone_ohci_init,
+ .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
};
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 925575f10acf..2061c00c8ead 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -25,7 +25,12 @@
#include "generic.h"
-#define PGSR(x) __REG2(0x40F00020, ((x) & 0x60) >> 3)
+#define gpio_to_bank(gpio) ((gpio) >> 5)
+
+#define PGSR(x) __REG2(0x40F00020, (x) << 2)
+#define __GAFR(u, x) __REG2((u) ? 0x40E00058 : 0x40E00054, (x) << 3)
+#define GAFR_L(x) __GAFR(0, x)
+#define GAFR_U(x) __GAFR(1, x)
#define PWER_WE35 (1 << 24)
@@ -38,49 +43,59 @@ struct gpio_desc {
};
static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
+static int gpio_nr;
-static int __mfp_config_lpm(unsigned gpio, unsigned long lpm)
-{
- unsigned mask = GPIO_bit(gpio);
-
- /* low power state */
- switch (lpm) {
- case MFP_LPM_DRIVE_HIGH:
- PGSR(gpio) |= mask;
- break;
- case MFP_LPM_DRIVE_LOW:
- PGSR(gpio) &= ~mask;
- break;
- case MFP_LPM_INPUT:
- break;
- default:
- pr_warning("%s: invalid low power state for GPIO%d\n",
- __func__, gpio);
- return -EINVAL;
- }
- return 0;
-}
+static unsigned long gpdr_lpm[4];
static int __mfp_config_gpio(unsigned gpio, unsigned long c)
{
unsigned long gafr, mask = GPIO_bit(gpio);
- int fn;
+ int bank = gpio_to_bank(gpio);
+ int uorl = !!(gpio & 0x10); /* GAFRx_U or GAFRx_L ? */
+ int shft = (gpio & 0xf) << 1;
+ int fn = MFP_AF(c);
+ int dir = c & MFP_DIR_OUT;
- fn = MFP_AF(c);
if (fn > 3)
return -EINVAL;
- /* alternate function and direction */
- gafr = GAFR(gpio) & ~(0x3 << ((gpio & 0xf) * 2));
- GAFR(gpio) = gafr | (fn << ((gpio & 0xf) * 2));
+ /* alternate function and direction at run-time */
+ gafr = (uorl == 0) ? GAFR_L(bank) : GAFR_U(bank);
+ gafr = (gafr & ~(0x3 << shft)) | (fn << shft);
- if (c & MFP_DIR_OUT)
+ if (uorl == 0)
+ GAFR_L(bank) = gafr;
+ else
+ GAFR_U(bank) = gafr;
+
+ if (dir == MFP_DIR_OUT)
GPDR(gpio) |= mask;
else
GPDR(gpio) &= ~mask;
- if (__mfp_config_lpm(gpio, c & MFP_LPM_STATE_MASK))
- return -EINVAL;
+ /* alternate function and direction at low power mode */
+ switch (c & MFP_LPM_STATE_MASK) {
+ case MFP_LPM_DRIVE_HIGH:
+ PGSR(bank) |= mask;
+ dir = MFP_DIR_OUT;
+ break;
+ case MFP_LPM_DRIVE_LOW:
+ PGSR(bank) &= ~mask;
+ dir = MFP_DIR_OUT;
+ break;
+ case MFP_LPM_DEFAULT:
+ break;
+ default:
+ /* warning and fall through, treat as MFP_LPM_DEFAULT */
+ pr_warning("%s: GPIO%d: unsupported low power mode\n",
+ __func__, gpio);
+ break;
+ }
+
+ if (dir == MFP_DIR_OUT)
+ gpdr_lpm[bank] |= mask;
+ else
+ gpdr_lpm[bank] &= ~mask;
/* give early warning if MFP_LPM_CAN_WAKEUP is set on the
* configurations of those pins not able to wakeup
@@ -91,7 +106,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
return -EINVAL;
}
- if ((c & MFP_LPM_CAN_WAKEUP) && (c & MFP_DIR_OUT)) {
+ if ((c & MFP_LPM_CAN_WAKEUP) && (dir == MFP_DIR_OUT)) {
pr_warning("%s: output GPIO%d unable to wakeup\n",
__func__, gpio);
return -EINVAL;
@@ -135,7 +150,7 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
{
- unsigned long flags;
+ unsigned long flags, c;
int gpio;
gpio = __mfp_validate(mfp);
@@ -143,7 +158,11 @@ void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
return;
local_irq_save(flags);
- __mfp_config_lpm(gpio, lpm);
+
+ c = gpio_desc[gpio].config;
+ c = (c & ~MFP_LPM_STATE_MASK) | lpm;
+ __mfp_config_gpio(gpio, c);
+
local_irq_restore(flags);
}
@@ -187,23 +206,22 @@ int gpio_set_wake(unsigned int gpio, unsigned int on)
}
#ifdef CONFIG_PXA25x
-static int __init pxa25x_mfp_init(void)
+static void __init pxa25x_mfp_init(void)
{
int i;
- if (cpu_is_pxa25x()) {
- for (i = 0; i <= 84; i++)
- gpio_desc[i].valid = 1;
+ for (i = 0; i <= 84; i++)
+ gpio_desc[i].valid = 1;
- for (i = 0; i <= 15; i++) {
- gpio_desc[i].can_wakeup = 1;
- gpio_desc[i].mask = GPIO_bit(i);
- }
+ for (i = 0; i <= 15; i++) {
+ gpio_desc[i].can_wakeup = 1;
+ gpio_desc[i].mask = GPIO_bit(i);
}
- return 0;
+ gpio_nr = 85;
}
-postcore_initcall(pxa25x_mfp_init);
+#else
+static inline void pxa25x_mfp_init(void) {}
#endif /* CONFIG_PXA25x */
#ifdef CONFIG_PXA27x
@@ -233,45 +251,106 @@ int keypad_set_wake(unsigned int on)
return 0;
}
-static int __init pxa27x_mfp_init(void)
+static void __init pxa27x_mfp_init(void)
{
int i, gpio;
- if (cpu_is_pxa27x()) {
- for (i = 0; i <= 120; i++) {
- /* skip GPIO2, 5, 6, 7, 8, they are not
- * valid pins allow configuration
- */
- if (i == 2 || i == 5 || i == 6 ||
- i == 7 || i == 8)
- continue;
+ for (i = 0; i <= 120; i++) {
+ /* skip GPIO2, 5, 6, 7, 8, they are not
+ * valid pins allow configuration
+ */
+ if (i == 2 || i == 5 || i == 6 || i == 7 || i == 8)
+ continue;
- gpio_desc[i].valid = 1;
- }
+ gpio_desc[i].valid = 1;
+ }
- /* Keypad GPIOs */
- for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
- gpio = pxa27x_pkwr_gpio[i];
- gpio_desc[gpio].can_wakeup = 1;
- gpio_desc[gpio].keypad_gpio = 1;
- gpio_desc[gpio].mask = 1 << i;
- }
+ /* Keypad GPIOs */
+ for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
+ gpio = pxa27x_pkwr_gpio[i];
+ gpio_desc[gpio].can_wakeup = 1;
+ gpio_desc[gpio].keypad_gpio = 1;
+ gpio_desc[gpio].mask = 1 << i;
+ }
- /* Overwrite GPIO13 as a PWER wakeup source */
- for (i = 0; i <= 15; i++) {
- /* skip GPIO2, 5, 6, 7, 8 */
- if (GPIO_bit(i) & 0x1e4)
- continue;
+ /* Overwrite GPIO13 as a PWER wakeup source */
+ for (i = 0; i <= 15; i++) {
+ /* skip GPIO2, 5, 6, 7, 8 */
+ if (GPIO_bit(i) & 0x1e4)
+ continue;
- gpio_desc[i].can_wakeup = 1;
- gpio_desc[i].mask = GPIO_bit(i);
- }
+ gpio_desc[i].can_wakeup = 1;
+ gpio_desc[i].mask = GPIO_bit(i);
+ }
+
+ gpio_desc[35].can_wakeup = 1;
+ gpio_desc[35].mask = PWER_WE35;
+
+ gpio_nr = 121;
+}
+#else
+static inline void pxa27x_mfp_init(void) {}
+#endif /* CONFIG_PXA27x */
+
+#ifdef CONFIG_PM
+static unsigned long saved_gafr[2][4];
+static unsigned long saved_gpdr[4];
- gpio_desc[35].can_wakeup = 1;
- gpio_desc[35].mask = PWER_WE35;
+static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
+{
+ int i;
+
+ for (i = 0; i <= gpio_to_bank(gpio_nr); i++) {
+
+ saved_gafr[0][i] = GAFR_L(i);
+ saved_gafr[1][i] = GAFR_U(i);
+ saved_gpdr[i] = GPDR(i * 32);
+
+ GPDR(i * 32) = gpdr_lpm[i];
}
+ return 0;
+}
+static int pxa2xx_mfp_resume(struct sys_device *d)
+{
+ int i;
+
+ for (i = 0; i <= gpio_to_bank(gpio_nr); i++) {
+ GAFR_L(i) = saved_gafr[0][i];
+ GAFR_U(i) = saved_gafr[1][i];
+ GPDR(i * 32) = saved_gpdr[i];
+ }
+ PSSR = PSSR_RDH | PSSR_PH;
return 0;
}
-postcore_initcall(pxa27x_mfp_init);
-#endif /* CONFIG_PXA27x */
+#else
+#define pxa2xx_mfp_suspend NULL
+#define pxa2xx_mfp_resume NULL
+#endif
+
+struct sysdev_class pxa2xx_mfp_sysclass = {
+ .name = "mfp",
+ .suspend = pxa2xx_mfp_suspend,
+ .resume = pxa2xx_mfp_resume,
+};
+
+static int __init pxa2xx_mfp_init(void)
+{
+ int i;
+
+ if (!cpu_is_pxa2xx())
+ return 0;
+
+ if (cpu_is_pxa25x())
+ pxa25x_mfp_init();
+
+ if (cpu_is_pxa27x())
+ pxa27x_mfp_init();
+
+ /* initialize gafr_run[], pgsr_lpm[] from existing values */
+ for (i = 0; i <= gpio_to_bank(gpio_nr); i++)
+ gpdr_lpm[i] = GPDR(i * 32);
+
+ return sysdev_class_register(&pxa2xx_mfp_sysclass);
+}
+postcore_initcall(pxa2xx_mfp_init);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
new file mode 100644
index 000000000000..0842c531ee4d
--- /dev/null
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -0,0 +1,905 @@
+/*
+ * Handles the Mitac Mio A701 Board
+ *
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/gpio_keys.h>
+#include <linux/pwm_backlight.h>
+#include <linux/rtc.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/pda_power.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxafb.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa27x-udc.h>
+
+#include <mach/mioa701.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long mioa701_pin_config[] = {
+ /* Mio global */
+ MIO_CFG_OUT(GPIO9_CHARGE_nEN, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
+ MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
+ MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
+
+ /* Backlight PWM 0 */
+ GPIO16_PWM0_OUT,
+
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
+ MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
+ MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
+
+ /* USB */
+ MIO_CFG_IN(GPIO13_USB_DETECT, AF0),
+ MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+
+ /* Bluetooth */
+ GPIO44_BTUART_CTS,
+ GPIO42_BTUART_RXD,
+ GPIO45_BTUART_RTS,
+ GPIO43_BTUART_TXD,
+ MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
+
+ /* GPS */
+ MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW),
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+
+ /* GSM */
+ MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW),
+ MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH),
+ MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0),
+ MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH,
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO36_FFUART_DCD,
+ GPIO37_FFUART_DSR,
+ GPIO39_FFUART_TXD,
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+
+ /* Sound */
+ GPIO89_AC97_SYSCLK,
+ MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
+
+ /* Leds */
+ MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH),
+ MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH),
+
+ /* Keyboard */
+ MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH,
+ MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0),
+ MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0),
+ GPIO100_KP_MKIN_0,
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* Unknown */
+ MFP_CFG_IN(GPIO14, AF0),
+ MFP_CFG_IN(GPIO20, AF0),
+ MFP_CFG_IN(GPIO21, AF0),
+ MFP_CFG_IN(GPIO33, AF0),
+ MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
+ MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
+ MFP_CFG_OUT(GPIO77, AF0, DRIVE_HIGH),
+ MFP_CFG_IN(GPIO80, AF0),
+ MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH),
+ MFP_CFG_IN(GPIO96, AF0),
+ MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
+};
+
+#define MIO_GPIO_IN(num, _desc) \
+ { .gpio = (num), .dir = 0, .desc = (_desc) }
+#define MIO_GPIO_OUT(num, _init, _desc) \
+ { .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) }
+struct gpio_ress {
+ unsigned gpio : 8;
+ unsigned dir : 1;
+ unsigned init : 1;
+ char *desc;
+};
+
+static int mio_gpio_request(struct gpio_ress *gpios, int size)
+{
+ int i, rc = 0;
+ int gpio;
+ int dir;
+
+ for (i = 0; (!rc) && (i < size); i++) {
+ gpio = gpios[i].gpio;
+ dir = gpios[i].dir;
+ rc = gpio_request(gpio, gpios[i].desc);
+ if (rc) {
+ printk(KERN_ERR "Error requesting GPIO %d(%s) : %d\n",
+ gpio, gpios[i].desc, rc);
+ continue;
+ }
+ if (dir)
+ gpio_direction_output(gpio, gpios[i].init);
+ else
+ gpio_direction_input(gpio);
+ }
+ while ((rc) && (--i >= 0))
+ gpio_free(gpios[i].gpio);
+ return rc;
+}
+
+static void mio_gpio_free(struct gpio_ress *gpios, int size)
+{
+ int i;
+
+ for (i = 0; i < size; i++)
+ gpio_free(gpios[i].gpio);
+}
+
+/* LCD Screen and Backlight */
+static struct platform_pwm_backlight_data mioa701_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 100,
+ .dft_brightness = 50,
+ .pwm_period_ns = 4000 * 1024, /* Fl = 250kHz */
+};
+
+/*
+ * LTM0305A776C LCD panel timings
+ *
+ * see:
+ * - the LTM0305A776C datasheet,
+ * - and the PXA27x Programmers' manual
+ */
+static struct pxafb_mode_info mioa701_ltm0305a776c = {
+ .pixclock = 220000, /* CLK=4.545 MHz */
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .vsync_len = 2,
+ .left_margin = 6,
+ .right_margin = 4,
+ .upper_margin = 5,
+ .lower_margin = 3,
+};
+
+static void mioa701_lcd_power(int on, struct fb_var_screeninfo *si)
+{
+ gpio_set_value(GPIO87_LCD_POWER, on);
+}
+
+static struct pxafb_mach_info mioa701_pxafb_info = {
+ .modes = &mioa701_ltm0305a776c,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+ .pxafb_lcd_power = mioa701_lcd_power,
+};
+
+/*
+ * Keyboard configuration
+ */
+static unsigned int mioa701_matrix_keys[] = {
+ KEY(0, 0, KEY_UP),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_MEDIA),
+ KEY(1, 0, KEY_DOWN),
+ KEY(1, 1, KEY_ENTER),
+ KEY(1, 2, KEY_CONNECT), /* GPS key */
+ KEY(2, 0, KEY_LEFT),
+ KEY(2, 1, KEY_PHONE), /* Phone Green key */
+ KEY(2, 2, KEY_CAMERA) /* Camera key */
+};
+static struct pxa27x_keypad_platform_data mioa701_keypad_info = {
+ .matrix_key_rows = 3,
+ .matrix_key_cols = 3,
+ .matrix_key_map = mioa701_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(mioa701_matrix_keys),
+};
+
+/*
+ * GPIO Key Configuration
+ */
+#define MIO_KEY(key, _gpio, _desc, _wakeup) \
+ { .code = (key), .gpio = (_gpio), .active_low = 0, \
+ .desc = (_desc), .type = EV_KEY, .wakeup = (_wakeup) }
+static struct gpio_keys_button mioa701_button_table[] = {
+ MIO_KEY(KEY_EXIT, GPIO0_KEY_POWER, "Power button", 1),
+ MIO_KEY(KEY_VOLUMEUP, GPIO93_KEY_VOLUME_UP, "Volume up", 0),
+ MIO_KEY(KEY_VOLUMEDOWN, GPIO94_KEY_VOLUME_DOWN, "Volume down", 0),
+ MIO_KEY(KEY_HP, GPIO12_HPJACK_INSERT, "HP jack detect", 0)
+};
+
+static struct gpio_keys_platform_data mioa701_gpio_keys_data = {
+ .buttons = mioa701_button_table,
+ .nbuttons = ARRAY_SIZE(mioa701_button_table),
+};
+
+/*
+ * Leds and vibrator
+ */
+#define ONE_LED(_gpio, _name) \
+{ .gpio = (_gpio), .name = (_name), .active_low = true }
+static struct gpio_led gpio_leds[] = {
+ ONE_LED(GPIO10_LED_nCharging, "mioa701:charging"),
+ ONE_LED(GPIO97_LED_nBlue, "mioa701:blue"),
+ ONE_LED(GPIO98_LED_nOrange, "mioa701:orange"),
+ ONE_LED(GPIO82_LED_nVibra, "mioa701:vibra"),
+ ONE_LED(GPIO115_LED_nKeyboard, "mioa701:keyboard")
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+/*
+ * GSM Sagem XS200 chip
+ *
+ * GSM handling was purged from kernel. For history, this is the way to go :
+ * - init : GPIO24_GSM_MOD_RESET_CMD = 0, GPIO114_GSM_nMOD_DTE_UART_STATE = 1
+ * GPIO88_GSM_nMOD_ON_CMD = 1, GPIO90_GSM_nMOD_OFF_CMD = 1
+ * - reset : GPIO24_GSM_MOD_RESET_CMD = 1, msleep(100),
+ * GPIO24_GSM_MOD_RESET_CMD = 0
+ * - turn on : GPIO88_GSM_nMOD_ON_CMD = 0, msleep(1000),
+ * GPIO88_GSM_nMOD_ON_CMD = 1
+ * - turn off : GPIO90_GSM_nMOD_OFF_CMD = 0, msleep(1000),
+ * GPIO90_GSM_nMOD_OFF_CMD = 1
+ */
+static int is_gsm_on(void)
+{
+ int is_on;
+
+ is_on = !!gpio_get_value(GPIO25_GSM_MOD_ON_STATE);
+ return is_on;
+}
+
+irqreturn_t gsm_on_irq(int irq, void *p)
+{
+ printk(KERN_DEBUG "Mioa701: GSM status changed to %s\n",
+ is_gsm_on() ? "on" : "off");
+ return IRQ_HANDLED;
+}
+
+struct gpio_ress gsm_gpios[] = {
+ MIO_GPIO_IN(GPIO25_GSM_MOD_ON_STATE, "GSM state"),
+ MIO_GPIO_IN(GPIO113_GSM_EVENT, "GSM event"),
+};
+
+static int __init gsm_init(void)
+{
+ int rc;
+
+ rc = mio_gpio_request(ARRAY_AND_SIZE(gsm_gpios));
+ if (rc)
+ goto err_gpio;
+ rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "GSM XS200 Power Irq", NULL);
+ if (rc)
+ goto err_irq;
+
+ gpio_set_wake(GPIO113_GSM_EVENT, 1);
+ return 0;
+
+err_irq:
+ printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n");
+ mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
+err_gpio:
+ printk(KERN_ERR "Mioa701: gsm not available\n");
+ return rc;
+}
+
+static void gsm_exit(void)
+{
+ free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
+ mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
+}
+
+/*
+ * Bluetooth BRF6150 chip
+ *
+ * BT handling was purged from kernel. For history, this is the way to go :
+ * - turn on : GPIO83_BT_ON = 1
+ * - turn off : GPIO83_BT_ON = 0
+ */
+
+/*
+ * GPS Sirf Star III chip
+ *
+ * GPS handling was purged from kernel. For history, this is the way to go :
+ * - init : GPIO23_GPS_UNKNOWN1 = 1, GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
+ * GPIO106_GPS_UNKNOWN2 = 0, GPIO107_GPS_UNKNOWN3 = 0
+ * - turn on : GPIO27_GPS_RESET = 1, GPIO26_GPS_ON = 1
+ * - turn off : GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
+ */
+
+/*
+ * USB UDC
+ */
+static void udc_power_command(int cmd)
+{
+ switch (cmd) {
+ case PXA2XX_UDC_CMD_DISCONNECT:
+ gpio_set_value(GPIO22_USB_ENABLE, 0);
+ break;
+ case PXA2XX_UDC_CMD_CONNECT:
+ gpio_set_value(GPIO22_USB_ENABLE, 1);
+ break;
+ default:
+ printk(KERN_INFO "udc_control: unknown command (0x%x)!\n", cmd);
+ break;
+ }
+}
+
+static int is_usb_connected(void)
+{
+ return !!gpio_get_value(GPIO13_USB_DETECT);
+}
+
+static struct pxa2xx_udc_mach_info mioa701_udc_info = {
+ .udc_is_connected = is_usb_connected,
+ .udc_command = udc_power_command,
+};
+
+struct gpio_ress udc_gpios[] = {
+ MIO_GPIO_OUT(GPIO22_USB_ENABLE, 0, "USB Vbus enable")
+};
+
+static int __init udc_init(void)
+{
+ pxa_set_udc_info(&mioa701_udc_info);
+ return mio_gpio_request(ARRAY_AND_SIZE(udc_gpios));
+}
+
+static void udc_exit(void)
+{
+ mio_gpio_free(ARRAY_AND_SIZE(udc_gpios));
+}
+
+/*
+ * SDIO/MMC Card controller
+ */
+static void mci_setpower(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+
+ if ((1 << vdd) & p_d->ocr_mask)
+ gpio_set_value(GPIO91_SDIO_EN, 1); /* enable SDIO power */
+ else
+ gpio_set_value(GPIO91_SDIO_EN, 0); /* disable SDIO power */
+}
+
+static int mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO78_SDIO_RO);
+}
+
+struct gpio_ress mci_gpios[] = {
+ MIO_GPIO_IN(GPIO78_SDIO_RO, "SDIO readonly detect"),
+ MIO_GPIO_IN(GPIO15_SDIO_INSERT, "SDIO insertion detect"),
+ MIO_GPIO_OUT(GPIO91_SDIO_EN, 0, "SDIO power enable")
+};
+
+static void mci_exit(struct device *dev, void *data)
+{
+ mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
+ free_irq(gpio_to_irq(GPIO15_SDIO_INSERT), data);
+}
+
+static struct pxamci_platform_data mioa701_mci_info;
+
+/**
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert/eject.
+ */
+static int mci_init(struct device *dev, irq_handler_t detect_int, void *data)
+{
+ int rc;
+ int irq = gpio_to_irq(GPIO15_SDIO_INSERT);
+
+ rc = mio_gpio_request(ARRAY_AND_SIZE(mci_gpios));
+ if (rc)
+ goto err_gpio;
+ /* enable RE/FE interrupt on card insertion and removal */
+ rc = request_irq(irq, detect_int,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING,
+ "MMC card detect", data);
+ if (rc)
+ goto err_irq;
+
+ mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
+ return 0;
+
+err_irq:
+ dev_err(dev, "mioa701_mci_init: MMC/SD:"
+ " can't request MMC card detect IRQ\n");
+ mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
+err_gpio:
+ return rc;
+}
+
+static struct pxamci_platform_data mioa701_mci_info = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .init = mci_init,
+ .get_ro = mci_get_ro,
+ .setpower = mci_setpower,
+ .exit = mci_exit,
+};
+
+/* FlashRAM */
+static struct resource strataflash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data strataflash_data = {
+ .width = 2,
+ /* .set_vpp = mioa701_set_vpp, */
+};
+
+static struct platform_device strataflash = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &strataflash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &strataflash_data,
+ },
+};
+
+/*
+ * Suspend/Resume bootstrap management
+ *
+ * MIO A701 reboot sequence is highly ROM dependant. From the one dissassembled,
+ * this sequence is as follows :
+ * - disables interrupts
+ * - initialize SDRAM (self refresh RAM into active RAM)
+ * - initialize GPIOs (depends on value at 0xa020b020)
+ * - initialize coprossessors
+ * - if edge detect on PWR_SCL(GPIO3), then proceed to cold start
+ * - or if value at 0xa020b000 not equal to 0x0f0f0f0f, proceed to cold start
+ * - else do a resume, ie. jump to addr 0xa0100000
+ */
+#define RESUME_ENABLE_ADDR 0xa020b000
+#define RESUME_ENABLE_VAL 0x0f0f0f0f
+#define RESUME_BT_ADDR 0xa020b020
+#define RESUME_UNKNOWN_ADDR 0xa020b024
+#define RESUME_VECTOR_ADDR 0xa0100000
+#define BOOTSTRAP_WORDS mioa701_bootstrap_lg/4
+
+static u32 *save_buffer;
+
+static void install_bootstrap(void)
+{
+ int i;
+ u32 *rom_bootstrap = phys_to_virt(RESUME_VECTOR_ADDR);
+ u32 *src = &mioa701_bootstrap;
+
+ for (i = 0; i < BOOTSTRAP_WORDS; i++)
+ rom_bootstrap[i] = src[i];
+}
+
+
+static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
+{
+ int i = 0, is_bt_on;
+ u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR);
+ u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
+ u32 *mem_resume_bt = phys_to_virt(RESUME_BT_ADDR);
+ u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
+
+ /* Devices prepare suspend */
+ is_bt_on = gpio_get_value(GPIO83_BT_ON);
+ pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
+ is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
+
+ for (i = 0; i < BOOTSTRAP_WORDS; i++)
+ save_buffer[i] = mem_resume_vector[i];
+ save_buffer[i++] = *mem_resume_enabler;
+ save_buffer[i++] = *mem_resume_bt;
+ save_buffer[i++] = *mem_resume_unknown;
+
+ *mem_resume_enabler = RESUME_ENABLE_VAL;
+ *mem_resume_bt = is_bt_on;
+
+ install_bootstrap();
+ return 0;
+}
+
+static int mioa701_sys_resume(struct sys_device *sysdev)
+{
+ int i = 0;
+ u32 *mem_resume_vector = phys_to_virt(RESUME_VECTOR_ADDR);
+ u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
+ u32 *mem_resume_bt = phys_to_virt(RESUME_BT_ADDR);
+ u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
+
+ for (i = 0; i < BOOTSTRAP_WORDS; i++)
+ mem_resume_vector[i] = save_buffer[i];
+ *mem_resume_enabler = save_buffer[i++];
+ *mem_resume_bt = save_buffer[i++];
+ *mem_resume_unknown = save_buffer[i++];
+
+ return 0;
+}
+
+static struct sysdev_class mioa701_sysclass = {
+ .name = "mioa701",
+};
+
+static struct sys_device sysdev_bootstrap = {
+ .cls = &mioa701_sysclass,
+};
+
+static struct sysdev_driver driver_bootstrap = {
+ .suspend = &mioa701_sys_suspend,
+ .resume = &mioa701_sys_resume,
+};
+
+static int __init bootstrap_init(void)
+{
+ int rc;
+ int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3);
+
+ rc = sysdev_class_register(&mioa701_sysclass);
+ if (rc) {
+ printk(KERN_ERR "Failed registering mioa701 sys class\n");
+ return -ENODEV;
+ }
+ rc = sysdev_register(&sysdev_bootstrap);
+ if (rc) {
+ printk(KERN_ERR "Failed registering mioa701 sys device\n");
+ return -ENODEV;
+ }
+ rc = sysdev_driver_register(&mioa701_sysclass, &driver_bootstrap);
+ if (rc) {
+ printk(KERN_ERR "Failed registering PMU sys driver\n");
+ return -ENODEV;
+ }
+
+ save_buffer = kmalloc(save_size, GFP_KERNEL);
+ if (!save_buffer)
+ return -ENOMEM;
+ printk(KERN_INFO "MioA701: allocated %d bytes for bootstrap\n",
+ save_size);
+ return 0;
+}
+
+static void bootstrap_exit(void)
+{
+ kfree(save_buffer);
+ sysdev_driver_unregister(&mioa701_sysclass, &driver_bootstrap);
+ sysdev_unregister(&sysdev_bootstrap);
+ sysdev_class_unregister(&mioa701_sysclass);
+
+ printk(KERN_CRIT "Unregistering mioa701 suspend will hang next"
+ "resume !!!\n");
+}
+
+/*
+ * Power Supply
+ */
+static char *supplicants[] = {
+ "mioa701_battery"
+};
+
+static void mioa701_set_charge(int flags)
+{
+ gpio_set_value(GPIO9_CHARGE_nEN, !flags);
+}
+
+static struct pda_power_pdata power_pdata = {
+ .is_ac_online = is_usb_connected,
+ .set_charge = mioa701_set_charge,
+ .supplied_to = supplicants,
+ .num_supplicants = ARRAY_SIZE(supplicants),
+};
+
+static struct resource power_resources[] = {
+ [0] = {
+ .name = "ac",
+ .start = gpio_to_irq(GPIO13_USB_DETECT),
+ .end = gpio_to_irq(GPIO13_USB_DETECT),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+static struct platform_device power_dev = {
+ .name = "pda-power",
+ .id = -1,
+ .resource = power_resources,
+ .num_resources = ARRAY_SIZE(power_resources),
+ .dev = {
+ .platform_data = &power_pdata,
+ },
+};
+
+#if defined(CONFIG_PDA_POWER) && defined(CONFIG_TOUCHSCREEN_WM97XX)
+static struct wm97xx *battery_wm;
+
+static enum power_supply_property battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, /* Necessary for apm */
+};
+
+static int get_battery_voltage(void)
+{
+ int adc = -1;
+
+ if (battery_wm)
+ adc = wm97xx_read_aux_adc(battery_wm, WM97XX_AUX_ID1);
+ return adc;
+}
+
+static int get_battery_status(struct power_supply *b)
+{
+ int status;
+
+ if (is_usb_connected())
+ status = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ status = POWER_SUPPLY_STATUS_DISCHARGING;
+
+ return status;
+}
+
+static int get_property(struct power_supply *b,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int rc = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = get_battery_status(b);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = 0xfd0;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ val->intval = 0xc00;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = get_battery_voltage();
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ val->intval = 100;
+ break;
+ default:
+ val->intval = -1;
+ rc = -1;
+ }
+
+ return rc;
+};
+
+static struct power_supply battery_ps = {
+ .name = "mioa701_battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .get_property = get_property,
+ .properties = battery_props,
+ .num_properties = ARRAY_SIZE(battery_props),
+};
+
+static int battery_probe(struct platform_device *pdev)
+{
+ struct wm97xx *wm = platform_get_drvdata(pdev);
+ int rc;
+
+ battery_wm = wm;
+
+ rc = power_supply_register(NULL, &battery_ps);
+ if (rc)
+ dev_err(&pdev->dev,
+ "Could not register mioa701 battery -> %d\n", rc);
+ return rc;
+}
+
+static int battery_remove(struct platform_device *pdev)
+{
+ battery_wm = NULL;
+ return 0;
+}
+
+static struct platform_driver mioa701_battery_driver = {
+ .driver = {
+ .name = "wm97xx-battery",
+ },
+ .probe = battery_probe,
+ .remove = battery_remove
+};
+
+static int __init mioa701_battery_init(void)
+{
+ int rc;
+
+ rc = platform_driver_register(&mioa701_battery_driver);
+ if (rc)
+ printk(KERN_ERR "Could not register mioa701 battery driver\n");
+ return rc;
+}
+
+#else
+static int __init mioa701_battery_init(void)
+{
+ return 0;
+}
+#endif
+
+/*
+ * Mio global
+ */
+
+/* Devices */
+#define MIO_PARENT_DEV(var, strname, tparent, pdata) \
+static struct platform_device var = { \
+ .name = strname, \
+ .id = -1, \
+ .dev = { \
+ .platform_data = pdata, \
+ .parent = tparent, \
+ }, \
+};
+#define MIO_SIMPLE_DEV(var, strname, pdata) \
+ MIO_PARENT_DEV(var, strname, NULL, pdata)
+
+MIO_SIMPLE_DEV(mioa701_gpio_keys, "gpio-keys", &mioa701_gpio_keys_data)
+MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight", &pxa27x_device_pwm0.dev,
+ &mioa701_backlight_data);
+MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info)
+MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL)
+MIO_SIMPLE_DEV(pxa2xx_ac97, "pxa2xx-ac97", NULL)
+MIO_PARENT_DEV(mio_wm9713_codec, "wm9713-codec", &pxa2xx_ac97.dev, NULL)
+MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL)
+MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL)
+
+static struct platform_device *devices[] __initdata = {
+ &mioa701_gpio_keys,
+ &mioa701_backlight,
+ &mioa701_led,
+ &pxa2xx_pcm,
+ &pxa2xx_ac97,
+ &mio_wm9713_codec,
+ &mioa701_sound,
+ &power_dev,
+ &strataflash,
+ &mioa701_board
+};
+
+static void mioa701_machine_exit(void);
+
+static void mioa701_poweroff(void)
+{
+ mioa701_machine_exit();
+ gpio_set_value(GPIO18_POWEROFF, 1);
+}
+
+static void mioa701_restart(char c)
+{
+ mioa701_machine_exit();
+ arm_machine_restart(c);
+}
+
+struct gpio_ress global_gpios[] = {
+ MIO_GPIO_OUT(GPIO9_CHARGE_nEN, 1, "Charger enable"),
+ MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
+ MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
+};
+
+static void __init mioa701_machine_init(void)
+{
+ PSLR = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */
+ PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE;
+ RTTR = 32768 - 1; /* Reset crazy WinCE value */
+ UP2OCR = UP2OCR_HXOE;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
+ mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
+ bootstrap_init();
+ set_pxa_fb_info(&mioa701_pxafb_info);
+ pxa_set_mci_info(&mioa701_mci_info);
+ pxa_set_keypad_info(&mioa701_keypad_info);
+ udc_init();
+ pm_power_off = mioa701_poweroff;
+ arm_pm_restart = mioa701_restart;
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ gsm_init();
+ mioa701_battery_init();
+}
+
+static void mioa701_machine_exit(void)
+{
+ udc_exit();
+ bootstrap_exit();
+ gsm_exit();
+}
+
+MACHINE_START(MIOA701, "MIO A701")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = &pxa_map_io,
+ .init_irq = &pxa27x_init_irq,
+ .init_machine = mioa701_machine_init,
+ .timer = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S
new file mode 100644
index 000000000000..a647693d9856
--- /dev/null
+++ b/arch/arm/mach-pxa/mioa701_bootresume.S
@@ -0,0 +1,36 @@
+/* Bootloader to resume MIO A701
+ *
+ * 2007-1-12 Robert Jarzmik
+ *
+ * This code is licenced under the GPLv2.
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Note: Yes, part of the following code is located into the .data section.
+ * This is to allow jumpaddr to be accessed with a relative load
+ * while we can't rely on any MMU translation. We could have put
+ * sleep_save_sp in the .text section as well, but some setups might
+ * insist on it to be truly read-only.
+ */
+ .data
+ENTRY(mioa701_bootstrap)
+0:
+ b 1f
+ENTRY(mioa701_jumpaddr)
+ .word 0x40f00008 @ PSPR in no-MMU mode
+1:
+ mov r0, #0xa0000000 @ Don't suppose memory access works
+ orr r0, r0, #0x00200000 @ even if it's supposed to
+ mov r1, #0
+ str r1, [r0] @ Early disable resume for next boot
+ ldr r0, mioa701_jumpaddr @ (Murphy's Law)
+ ldr r0, [r0]
+ mov pc, r0
+2:
+
+ENTRY(mioa701_bootstrap_lg)
+ .data
+ .word 2b-0b
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
new file mode 100644
index 000000000000..8a73814126b1
--- /dev/null
+++ b/arch/arm/mach-pxa/mp900.c
@@ -0,0 +1,100 @@
+/*
+ * linux/arch/arm/mach-pxa/mp900.c
+ *
+ * Support for the NEC MobilePro900/C platform
+ *
+ * Based on mach-pxa/gumstix.c
+ *
+ * 2007, 2008 Kristoffer Ericson <kristoffer.ericson@gmail.com>
+ * 2007, 2008 Michael Petchkovsky <mkpetch@internode.on.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/usb/isp116x.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "generic.h"
+
+static void isp116x_pfm_delay(struct device *dev, int delay)
+{
+
+ /* 400Mhz PXA2 = 2.5ns / instruction */
+
+ int cyc = delay / 10;
+
+ /* 4 Instructions = 4 x 2.5ns = 10ns */
+ __asm__ volatile ("0:\n"
+ "subs %0, %1, #1\n"
+ "bge 0b\n"
+ :"=r" (cyc)
+ :"0"(cyc)
+ );
+}
+
+static struct isp116x_platform_data isp116x_pfm_data = {
+ .remote_wakeup_enable = 1,
+ .delay = isp116x_pfm_delay,
+};
+
+static struct resource isp116x_pfm_resources[] = {
+ [0] = {
+ .start = 0x0d000000,
+ .end = 0x0d000000 + 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x0d000000 + 4,
+ .end = 0x0d000000 + 5,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = 61,
+ .end = 61,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mp900c_dummy_device = {
+ .name = "mp900c_dummy",
+ .id = -1,
+};
+
+static struct platform_device mp900c_usb = {
+ .name = "isp116x-hcd",
+ .num_resources = ARRAY_SIZE(isp116x_pfm_resources),
+ .resource = isp116x_pfm_resources,
+ .dev.platform_data = &isp116x_pfm_data,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &mp900c_dummy_device,
+ &mp900c_usb,
+};
+
+static void __init mp900c_init(void)
+{
+ printk(KERN_INFO "MobilePro 900/C machine init\n");
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+/* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
+MACHINE_START(NEC_MP900, "MobilePro900/C")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0220100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .timer = &pxa_timer,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .init_machine = mp900c_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index fe924a23debe..4447711c9fc6 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -25,6 +25,8 @@
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -340,6 +342,23 @@ static struct platform_device power_supply = {
};
/******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+ .batt_aux = WM97XX_AUX_ID3,
+ .temp_aux = WM97XX_AUX_ID2,
+ .charge_gpio = -1,
+ .max_voltage = PALMTX_BAT_MAX_VOLTAGE,
+ .min_voltage = PALMTX_BAT_MIN_VOLTAGE,
+ .batt_mult = 1000,
+ .batt_div = 414,
+ .temp_mult = 1,
+ .temp_div = 1,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .batt_name = "main-batt",
+};
+
+/******************************************************************************
* Framebuffer
******************************************************************************/
static struct pxafb_mode_info palmtx_lcd_modes[] = {
@@ -401,6 +420,7 @@ static void __init palmtx_init(void)
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmtx_ficp_platform_data);
pxa_set_keypad_info(&palmtx_keypad_platform_data);
+ wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
new file mode 100644
index 000000000000..2f730da3bba8
--- /dev/null
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -0,0 +1,554 @@
+/*
+ * Hardware definitions for Palm Zire72
+ *
+ * Authors:
+ * Vladimir "Farcaller" Pouzanov <farcaller@gmail.com>
+ * Sergey Lapin <slapin@ossfans.org>
+ * Alex Osborne <bobofdoom@gmail.com>
+ * Jan Herman <2hp@seznam.cz>
+ *
+ * Rewrite for mainline:
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmz72.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+#include <mach/pm.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmz72_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO14_GPIO, /* SD detect */
+ GPIO115_GPIO, /* SD RO */
+ GPIO98_GPIO, /* SD power */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* IrDA */
+ GPIO49_GPIO, /* ir disable */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* USB */
+ GPIO15_GPIO, /* usb detect */
+ GPIO12_GPIO, /* usb pullup */
+ GPIO95_GPIO, /* usb power */
+
+ /* Matrix keypad */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+ GPIO20_GPIO, /* bl power */
+ GPIO21_GPIO, /* LCD border switch */
+ GPIO22_GPIO, /* LCD border color */
+ GPIO96_GPIO, /* lcd power */
+
+ /* Misc. */
+ GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* power detect */
+ GPIO88_GPIO, /* green led */
+ GPIO27_GPIO, /* WM9712 IRQ */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmz72_mci_init(struct device *dev,
+ irq_handler_t palmz72_detect_int, void *data)
+{
+ int err = 0;
+
+ /* Setup an interrupt for detecting card insert/remove events */
+ err = gpio_request(GPIO_NR_PALMZ72_SD_DETECT_N, "SD IRQ");
+ if (err)
+ goto err;
+ err = gpio_direction_input(GPIO_NR_PALMZ72_SD_DETECT_N);
+ if (err)
+ goto err2;
+ err = request_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N),
+ palmz72_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "SD/MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+ __func__);
+ goto err2;
+ }
+
+ /* SD_POWER is not actually power, but it is more like chip
+ * select, i.e. it is inverted */
+
+ err = gpio_request(GPIO_NR_PALMZ72_SD_POWER_N, "SD_POWER");
+ if (err)
+ goto err3;
+ err = gpio_direction_output(GPIO_NR_PALMZ72_SD_POWER_N, 0);
+ if (err)
+ goto err4;
+ err = gpio_request(GPIO_NR_PALMZ72_SD_RO, "SD_RO");
+ if (err)
+ goto err4;
+ err = gpio_direction_input(GPIO_NR_PALMZ72_SD_RO);
+ if (err)
+ goto err5;
+
+ printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+ return 0;
+
+err5:
+ gpio_free(GPIO_NR_PALMZ72_SD_RO);
+err4:
+ gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
+err3:
+ free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
+err2:
+ gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
+err:
+ return err;
+}
+
+static void palmz72_mci_exit(struct device *dev, void *data)
+{
+ gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
+ free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
+ gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
+ gpio_free(GPIO_NR_PALMZ72_SD_RO);
+}
+
+static void palmz72_mci_power(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+ if (p_d->ocr_mask & (1 << vdd))
+ gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 0);
+ else
+ gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 1);
+}
+
+static int palmz72_mci_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_NR_PALMZ72_SD_RO);
+}
+
+static struct pxamci_platform_data palmz72_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .setpower = palmz72_mci_power,
+ .get_ro = palmz72_mci_ro,
+ .init = palmz72_mci_init,
+ .exit = palmz72_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmz72_matrix_keys[] = {
+ KEY(0, 0, KEY_POWER),
+ KEY(0, 1, KEY_F1),
+ KEY(0, 2, KEY_ENTER),
+
+ KEY(1, 0, KEY_F2),
+ KEY(1, 1, KEY_F3),
+ KEY(1, 2, KEY_F4),
+
+ KEY(2, 0, KEY_UP),
+ KEY(2, 2, KEY_DOWN),
+
+ KEY(3, 0, KEY_RIGHT),
+ KEY(3, 2, KEY_LEFT),
+};
+
+static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = {
+ .matrix_key_rows = 4,
+ .matrix_key_cols = 3,
+ .matrix_key_map = palmz72_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(palmz72_matrix_keys),
+
+ .debounce_interval = 30,
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmz72_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMZ72_BL_POWER, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_direction_output(GPIO_NR_PALMZ72_BL_POWER, 0);
+ if (ret)
+ goto err2;
+ ret = gpio_request(GPIO_NR_PALMZ72_LCD_POWER, "LCD POWER");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMZ72_LCD_POWER, 0);
+ if (ret)
+ goto err3;
+
+ return 0;
+err3:
+ gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
+err2:
+ gpio_free(GPIO_NR_PALMZ72_BL_POWER);
+err:
+ return ret;
+}
+
+static int palmz72_backlight_notify(int brightness)
+{
+ gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness);
+ gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness);
+ return brightness;
+}
+
+static void palmz72_backlight_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMZ72_BL_POWER);
+ gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmz72_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = PALMZ72_MAX_INTENSITY,
+ .dft_brightness = PALMZ72_MAX_INTENSITY,
+ .pwm_period_ns = PALMZ72_PERIOD_NS,
+ .init = palmz72_backlight_init,
+ .notify = palmz72_backlight_notify,
+ .exit = palmz72_backlight_exit,
+};
+
+static struct platform_device palmz72_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &palmz72_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmz72_irda_startup(struct device *dev)
+{
+ int err;
+ err = gpio_request(GPIO_NR_PALMZ72_IR_DISABLE, "IR DISABLE");
+ if (err)
+ goto err;
+ err = gpio_direction_output(GPIO_NR_PALMZ72_IR_DISABLE, 1);
+ if (err)
+ gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
+err:
+ return err;
+}
+
+static void palmz72_irda_shutdown(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
+}
+
+static void palmz72_irda_transceiver_mode(struct device *dev, int mode)
+{
+ gpio_set_value(GPIO_NR_PALMZ72_IR_DISABLE, mode & IR_OFF);
+ pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmz72_ficp_platform_data = {
+ .startup = palmz72_irda_startup,
+ .shutdown = palmz72_irda_shutdown,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = palmz72_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "palmz72:green:led",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_PALMZ72_LED_GREEN,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device palmz72_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ }
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMZ72_POWER_DETECT, "CABLE_STATE_AC");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_input(GPIO_NR_PALMZ72_POWER_DETECT);
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(GPIO_NR_PALMZ72_USB_DETECT_N, "CABLE_STATE_USB");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_input(GPIO_NR_PALMZ72_USB_DETECT_N);
+ if (ret)
+ goto err3;
+
+ return 0;
+err3:
+ gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
+err2:
+ gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
+err1:
+ return ret;
+}
+
+static int palmz72_is_ac_online(void)
+{
+ return gpio_get_value(GPIO_NR_PALMZ72_POWER_DETECT);
+}
+
+static int palmz72_is_usb_online(void)
+{
+ return !gpio_get_value(GPIO_NR_PALMZ72_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
+ gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
+}
+
+static char *palmz72_supplicants[] = {
+ "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = palmz72_is_ac_online,
+ .is_usb_online = palmz72_is_usb_online,
+ .exit = power_supply_exit,
+ .supplied_to = palmz72_supplicants,
+ .num_supplicants = ARRAY_SIZE(palmz72_supplicants),
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmz72_lcd_modes[] = {
+{
+ .pixclock = 115384,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+
+ .left_margin = 27,
+ .right_margin = 7,
+ .upper_margin = 7,
+ .lower_margin = 8,
+
+ .hsync_len = 6,
+ .vsync_len = 1,
+},
+};
+
+static struct pxafb_mach_info palmz72_lcd_screen = {
+ .modes = palmz72_lcd_modes,
+ .num_modes = ARRAY_SIZE(palmz72_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+#ifdef CONFIG_PM
+
+/* We have some black magic here
+ * PalmOS ROM on recover expects special struct physical address
+ * to be transferred via PSPR. Using this struct PalmOS restores
+ * its state after sleep. As for Linux, we need to setup it the
+ * same way. More than that, PalmOS ROM changes some values in memory.
+ * For now only one location is found, which needs special treatment.
+ * Thanks to Alex Osborne, Andrzej Zaborowski, and lots of other people
+ * for reading backtraces for me :)
+ */
+
+#define PALMZ72_SAVE_DWORD ((unsigned long *)0xc0000050)
+
+static struct palmz72_resume_info palmz72_resume_info = {
+ .magic0 = 0xb4e6,
+ .magic1 = 1,
+
+ /* reset state, MMU off etc */
+ .arm_control = 0,
+ .aux_control = 0,
+ .ttb = 0,
+ .domain_access = 0,
+ .process_id = 0,
+};
+
+static unsigned long store_ptr;
+
+/* sys_device for Palm Zire 72 PM */
+
+static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg)
+{
+ /* setup the resume_info struct for the original bootloader */
+ palmz72_resume_info.resume_addr = (u32) pxa_cpu_resume;
+
+ /* Storing memory touched by ROM */
+ store_ptr = *PALMZ72_SAVE_DWORD;
+
+ /* Setting PSPR to a proper value */
+ PSPR = virt_to_phys(&palmz72_resume_info);
+
+ return 0;
+}
+
+static int palmz72_pm_resume(struct sys_device *dev)
+{
+ *PALMZ72_SAVE_DWORD = store_ptr;
+ return 0;
+}
+
+static struct sysdev_class palmz72_pm_sysclass = {
+ .name = "palmz72_pm",
+ .suspend = palmz72_pm_suspend,
+ .resume = palmz72_pm_resume,
+};
+
+static struct sys_device palmz72_pm_device = {
+ .cls = &palmz72_pm_sysclass,
+};
+
+static int __init palmz72_pm_init(void)
+{
+ int ret = -ENODEV;
+ if (machine_is_palmz72()) {
+ ret = sysdev_class_register(&palmz72_pm_sysclass);
+ if (ret == 0)
+ ret = sysdev_register(&palmz72_pm_device);
+ }
+ return ret;
+}
+
+device_initcall(palmz72_pm_init);
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+ &palmz72_backlight,
+ &palmz72_leds,
+ &power_supply,
+};
+
+static void __init palmz72_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
+ set_pxa_fb_info(&palmz72_lcd_screen);
+ pxa_set_mci_info(&palmz72_mci_platform_data);
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&palmz72_ficp_platform_data);
+ pxa_set_keypad_info(&palmz72_keypad_platform_data);
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMZ72, "Palm Zire72")
+ .phys_io = 0x40000000,
+ .io_pg_offst = io_p2v(0x40000000),
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = palmz72_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 730b9f6ede1d..36135a02fdc7 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -31,7 +31,7 @@
#include <asm/mach/arch.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
#include <mach/pxa2xx-regs.h>
#include <mach/pxa2xx_spi.h>
#include <mach/pcm027.h>
@@ -86,6 +86,28 @@
* *) CPU internal use only
*/
+static unsigned long pcm027_pin_config[] __initdata = {
+ /* Chip Selects */
+ GPIO20_nSDCS_2,
+ GPIO21_nSDCS_3,
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO80_nCS_4,
+ GPIO33_nCS_5, /* Ethernet */
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* GPIO */
+ GPIO52_GPIO, /* IRQ from network controller */
+#ifdef CONFIG_LEDS_GPIO
+ GPIO90_GPIO, /* PCM027_LED_CPU */
+ GPIO91_GPIO, /* PCM027_LED_HEART_BEAT */
+#endif
+ GPIO114_GPIO, /* IRQ from CAN controller */
+};
+
/*
* SMC91x network controller specific stuff
*/
@@ -206,13 +228,9 @@ static void __init pcm027_init(void)
*/
ARB_CNTRL = ARB_CORE_PARK | 0x234;
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config));
- /* LEDs (on demand only) */
-#ifdef CONFIG_LEDS_GPIO
- pxa_gpio_mode(PCM027_LED_CPU | GPIO_OUT);
- pxa_gpio_mode(PCM027_LED_HEARD_BEAT | GPIO_OUT);
-#endif /* CONFIG_LEDS_GPIO */
+ platform_add_devices(devices, ARRAY_SIZE(devices));
/* at last call the baseboard to initialize itself */
#ifdef CONFIG_MACH_PCM990_BASEBOARD
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 420c9b3813f6..f601425f1b1e 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -262,8 +262,7 @@ static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
GPIO_bit(PCM990_CTRL_INT_IRQ_GPIO);
if (likely(pending)) {
irq = PCM027_IRQ(0) + __ffs(pending);
- desc = irq_desc + irq;
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
}
pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
} while (pending);
@@ -328,36 +327,10 @@ static struct pxamci_platform_data pcm990_mci_platform_data = {
.exit = pcm990_mci_exit,
};
-/*
- * init OHCI hardware to work with
- *
- * Note: Only USB port 1 (host only) is connected
- *
- * GPIO88 (USBHPWR#1): overcurrent in, overcurrent when low
- * GPIO89 (USBHPEN#1): power-on out, on when low
- */
-static int pcm990_ohci_init(struct device *dev)
-{
- /*
- * disable USB port 2 and 3
- * power sense is active low
- */
- UHCHR = ((UHCHR) | UHCHR_PCPL | UHCHR_PSPL | UHCHR_SSEP2 |
- UHCHR_SSEP3) & ~(UHCHR_SSEP1 | UHCHR_SSE);
- /*
- * wait 10ms after Power on
- * overcurrent per port
- * power switch per port
- */
- UHCRHDA = (5<<24) | (1<<11) | (1<<8); /* FIXME: Required? */
-
- return 0;
-}
-
static struct pxaohci_platform_data pcm990_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
- .init = pcm990_ohci_init,
- .exit = NULL,
+ .flags = ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+ .power_on_delay = 10,
};
/*
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 1b539e675579..164eb0bb6321 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -86,9 +86,27 @@ static int pxa_pm_valid(suspend_state_t state)
return -EINVAL;
}
+static int pxa_pm_prepare(void)
+{
+ int ret = 0;
+
+ if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->prepare)
+ ret = pxa_cpu_pm_fns->prepare();
+
+ return ret;
+}
+
+static void pxa_pm_finish(void)
+{
+ if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->finish)
+ pxa_cpu_pm_fns->finish();
+}
+
static struct platform_suspend_ops pxa_pm_ops = {
.valid = pxa_pm_valid,
.enter = pxa_pm_enter,
+ .prepare = pxa_pm_prepare,
+ .finish = pxa_pm_finish,
};
static int __init pxa_pm_init(void)
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 3f5f484549b3..2e3bd8b1523b 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -20,6 +20,9 @@
#include <linux/fb.h>
#include <linux/pm.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -33,7 +36,7 @@
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa25x.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/i2c.h>
@@ -42,6 +45,7 @@
#include <mach/pxafb.h>
#include <mach/sharpsl.h>
#include <mach/ssp.h>
+#include <mach/pxa2xx_spi.h>
#include <asm/hardware/scoop.h>
#include <asm/hardware/locomo.h>
@@ -51,6 +55,88 @@
#include "devices.h"
#include "sharpsl.h"
+static unsigned long poodle_pin_config[] __initdata = {
+ /* I/O */
+ GPIO79_nCS_3,
+ GPIO80_nCS_4,
+ GPIO18_RDY,
+
+ /* Clock */
+ GPIO12_32KHz,
+
+ /* SSP1 */
+ GPIO23_SSP1_SCLK,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+ GPIO24_GPIO, /* POODLE_GPIO_TP_CS - SFRM as chip select */
+
+ /* I2S */
+ GPIO28_I2S_BITCLK_OUT,
+ GPIO29_I2S_SDATA_IN,
+ GPIO30_I2S_SDATA_OUT,
+ GPIO31_I2S_SYNC,
+ GPIO32_I2S_SYSCLK,
+
+ /* Infra-Red */
+ GPIO47_FICP_TXD,
+ GPIO46_FICP_RXD,
+
+ /* FFUART */
+ GPIO40_FFUART_DTR,
+ GPIO41_FFUART_RTS,
+ GPIO39_FFUART_TXD,
+ GPIO37_FFUART_DSR,
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+
+ /* GPIO */
+ GPIO9_GPIO, /* POODLE_GPIO_nSD_DETECT */
+ GPIO7_GPIO, /* POODLE_GPIO_nSD_WP */
+ GPIO3_GPIO, /* POODLE_GPIO_SD_PWR */
+ GPIO33_GPIO, /* POODLE_GPIO_SD_PWR1 */
+
+ GPIO20_GPIO, /* POODLE_GPIO_USB_PULLUP */
+ GPIO22_GPIO, /* POODLE_GPIO_IR_ON */
+};
+
static struct resource poodle_scoop_resources[] = {
[0] = {
.start = 0x10800000,
@@ -62,6 +148,7 @@ static struct resource poodle_scoop_resources[] = {
static struct scoop_config poodle_scoop_setup = {
.io_dir = POODLE_SCOOP_IO_DIR,
.io_out = POODLE_SCOOP_IO_OUT,
+ .gpio_base = POODLE_SCOOP_GPIO_BASE,
};
struct platform_device poodle_scoop_device = {
@@ -74,27 +161,6 @@ struct platform_device poodle_scoop_device = {
.resource = poodle_scoop_resources,
};
-static void poodle_pcmcia_init(void)
-{
- /* Setup default state of GPIO outputs
- before we enable them as outputs. */
- GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
- GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
- GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
- GPIO_bit(GPIO53_nPCE_2);
-
- pxa_gpio_mode(GPIO48_nPOE_MD);
- pxa_gpio_mode(GPIO49_nPWE_MD);
- pxa_gpio_mode(GPIO50_nPIOR_MD);
- pxa_gpio_mode(GPIO51_nPIOW_MD);
- pxa_gpio_mode(GPIO55_nPREG_MD);
- pxa_gpio_mode(GPIO56_nPWAIT_MD);
- pxa_gpio_mode(GPIO57_nIOIS16_MD);
- pxa_gpio_mode(GPIO52_nPCE_1_MD);
- pxa_gpio_mode(GPIO53_nPCE_2_MD);
- pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-}
-
static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
{
.dev = &poodle_scoop_device.dev,
@@ -107,7 +173,6 @@ static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
static struct scoop_pcmcia_config poodle_pcmcia_config = {
.devs = &poodle_pcmcia_scoop[0],
.num_devs = 1,
- .pcmcia_init = poodle_pcmcia_init,
};
EXPORT_SYMBOL(poodle_scoop_device);
@@ -136,62 +201,55 @@ struct platform_device poodle_locomo_device = {
EXPORT_SYMBOL(poodle_locomo_device);
-/*
- * Poodle SSP Device
- */
-
-struct platform_device poodle_ssp_device = {
- .name = "corgi-ssp",
- .id = -1,
-};
-
-struct corgissp_machinfo poodle_ssp_machinfo = {
- .port = 1,
- .cs_lcdcon = -1,
- .cs_ads7846 = -1,
- .cs_max1111 = -1,
- .clk_lcdcon = 2,
- .clk_ads7846 = 36,
- .clk_max1111 = 2,
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master poodle_spi_info = {
+ .num_chipselect = 1,
};
-
-/*
- * Poodle Touch Screen Device
- */
-static struct resource poodlets_resources[] = {
- [0] = {
- .start = POODLE_IRQ_GPIO_TP_INT,
- .end = POODLE_IRQ_GPIO_TP_INT,
- .flags = IORESOURCE_IRQ,
- },
+static struct ads7846_platform_data poodle_ads7846_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100,
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .gpio_pendown = POODLE_GPIO_TP_INT,
};
-static unsigned long poodle_get_hsync_invperiod(void)
+static void ads7846_cs(u32 command)
{
- return 0;
+ gpio_set_value(POODLE_GPIO_TP_CS, !(command == PXA2XX_CS_ASSERT));
}
-static void poodle_null_hsync(void)
-{
-}
-
-static struct corgits_machinfo poodle_ts_machinfo = {
- .get_hsync_invperiod = poodle_get_hsync_invperiod,
- .put_hsync = poodle_null_hsync,
- .wait_hsync = poodle_null_hsync,
+static struct pxa2xx_spi_chip poodle_ads7846_chip = {
+ .cs_control = ads7846_cs,
};
-static struct platform_device poodle_ts_device = {
- .name = "corgi-ts",
- .dev = {
- .platform_data = &poodle_ts_machinfo,
+static struct spi_board_info poodle_spi_devices[] = {
+ {
+ .modalias = "ads7846",
+ .max_speed_hz = 10000,
+ .bus_num = 1,
+ .platform_data = &poodle_ads7846_info,
+ .controller_data= &poodle_ads7846_chip,
+ .irq = gpio_to_irq(POODLE_GPIO_TP_INT),
},
- .id = -1,
- .num_resources = ARRAY_SIZE(poodlets_resources),
- .resource = poodlets_resources,
};
+static void __init poodle_init_spi(void)
+{
+ int err;
+
+ err = gpio_request(POODLE_GPIO_TP_CS, "ADS7846_CS");
+ if (err)
+ return;
+
+ gpio_direction_output(POODLE_GPIO_TP_CS, 1);
+
+ pxa2xx_set_spi_info(1, &poodle_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
+}
+#else
+static inline void poodle_init_spi(void) {}
+#endif
/*
* MMC/SD Device
@@ -205,22 +263,50 @@ static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int,
{
int err;
- /* setup GPIO for PXA25x MMC controller */
- pxa_gpio_mode(GPIO6_MMCCLK_MD);
- pxa_gpio_mode(GPIO8_MMCCS0_MD);
- pxa_gpio_mode(POODLE_GPIO_nSD_DETECT | GPIO_IN);
- pxa_gpio_mode(POODLE_GPIO_nSD_WP | GPIO_IN);
- pxa_gpio_mode(POODLE_GPIO_SD_PWR | GPIO_OUT);
- pxa_gpio_mode(POODLE_GPIO_SD_PWR1 | GPIO_OUT);
+ err = gpio_request(POODLE_GPIO_nSD_DETECT, "nSD_DETECT");
+ if (err)
+ goto err_out;
+
+ err = gpio_request(POODLE_GPIO_nSD_WP, "nSD_WP");
+ if (err)
+ goto err_free_1;
+
+ err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR");
+ if (err)
+ goto err_free_2;
+
+ err = gpio_request(POODLE_GPIO_SD_PWR1, "SD_PWR1");
+ if (err)
+ goto err_free_3;
+
+ gpio_direction_input(POODLE_GPIO_nSD_DETECT);
+ gpio_direction_input(POODLE_GPIO_nSD_WP);
+
+ gpio_direction_output(POODLE_GPIO_SD_PWR, 0);
+ gpio_direction_output(POODLE_GPIO_SD_PWR1, 0);
poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
- if (err)
- printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+ if (err) {
+ pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
+ __func__);
+ goto err_free_4;
+ }
+
+ return 0;
+err_free_4:
+ gpio_free(POODLE_GPIO_SD_PWR1);
+err_free_3:
+ gpio_free(POODLE_GPIO_SD_PWR);
+err_free_2:
+ gpio_free(POODLE_GPIO_nSD_WP);
+err_free_1:
+ gpio_free(POODLE_GPIO_nSD_DETECT);
+err_out:
return err;
}
@@ -228,18 +314,19 @@ static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
- if (( 1 << vdd) & p_d->ocr_mask) {
- GPSR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR);
+ if ((1 << vdd) & p_d->ocr_mask) {
+ gpio_set_value(POODLE_GPIO_SD_PWR, 1);
mdelay(2);
- GPSR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1);
+ gpio_set_value(POODLE_GPIO_SD_PWR1, 1);
} else {
- GPCR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1);
- GPCR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR);
+ gpio_set_value(POODLE_GPIO_SD_PWR1, 0);
+ gpio_set_value(POODLE_GPIO_SD_PWR, 0);
}
}
static int poodle_mci_get_ro(struct device *dev)
{
+ return !!gpio_get_value(POODLE_GPIO_nSD_WP);
return GPLR(POODLE_GPIO_nSD_WP) & GPIO_bit(POODLE_GPIO_nSD_WP);
}
@@ -247,6 +334,10 @@ static int poodle_mci_get_ro(struct device *dev)
static void poodle_mci_exit(struct device *dev, void *data)
{
free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data);
+ gpio_free(POODLE_GPIO_SD_PWR1);
+ gpio_free(POODLE_GPIO_SD_PWR);
+ gpio_free(POODLE_GPIO_nSD_WP);
+ gpio_free(POODLE_GPIO_nSD_DETECT);
}
static struct pxamci_platform_data poodle_mci_platform_data = {
@@ -263,38 +354,41 @@ static struct pxamci_platform_data poodle_mci_platform_data = {
*/
static void poodle_irda_transceiver_mode(struct device *dev, int mode)
{
- if (mode & IR_OFF) {
- GPSR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
- } else {
- GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
- }
+ gpio_set_value(POODLE_GPIO_IR_ON, mode & IR_OFF);
pxa2xx_transceiver_mode(dev, mode);
}
+static int poodle_irda_startup(struct device *dev)
+{
+ int err;
+
+ err = gpio_request(POODLE_GPIO_IR_ON, "IR_ON");
+ if (err)
+ return err;
+
+ gpio_direction_output(POODLE_GPIO_IR_ON, 1);
+ return 0;
+}
+
+static void poodle_irda_shutdown(struct device *dev)
+{
+ gpio_free(POODLE_GPIO_IR_ON);
+}
+
static struct pxaficp_platform_data poodle_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = poodle_irda_transceiver_mode,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = poodle_irda_transceiver_mode,
+ .startup = poodle_irda_startup,
+ .shutdown = poodle_irda_shutdown,
};
/*
* USB Device Controller
*/
-static void poodle_udc_command(int cmd)
-{
- switch(cmd) {
- case PXA2XX_UDC_CMD_CONNECT:
- GPSR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
- break;
- case PXA2XX_UDC_CMD_DISCONNECT:
- GPCR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
- break;
- }
-}
-
static struct pxa2xx_udc_mach_info udc_info __initdata = {
/* no connect GPIO; poodle can't tell connection status */
- .udc_command = poodle_udc_command,
+ .gpio_pullup = POODLE_GPIO_USB_PULLUP,
};
@@ -316,15 +410,12 @@ static struct pxafb_mode_info poodle_fb_mode = {
static struct pxafb_mach_info poodle_fb_info = {
.modes = &poodle_fb_mode,
.num_modes = 1,
- .lccr0 = LCCR0_Act | LCCR0_Sngl | LCCR0_Color,
- .lccr3 = 0,
+ .lcd_conn = LCD_COLOR_TFT_16BPP,
};
static struct platform_device *devices[] __initdata = {
&poodle_locomo_device,
&poodle_scoop_device,
- &poodle_ssp_device,
- &poodle_ts_device,
};
static void poodle_poweroff(void)
@@ -344,59 +435,23 @@ static void __init poodle_init(void)
pm_power_off = poodle_poweroff;
arm_pm_restart = poodle_restart;
- /* setup sleep mode values */
- PWER = 0x00000002;
- PFER = 0x00000000;
- PRER = 0x00000002;
- PGSR0 = 0x00008000;
- PGSR1 = 0x003F0202;
- PGSR2 = 0x0001C000;
PCFR |= PCFR_OPDE;
- /* cpu initialize */
- /* Pgsr Register */
- PGSR0 = 0x0146dd80;
- PGSR1 = 0x03bf0890;
- PGSR2 = 0x0001c000;
-
- /* Alternate Register */
- GAFR0_L = 0x01001000;
- GAFR0_U = 0x591a8010;
- GAFR1_L = 0x900a8451;
- GAFR1_U = 0xaaa5aaaa;
- GAFR2_L = 0x8aaaaaaa;
- GAFR2_U = 0x00000002;
-
- /* Direction Register */
- GPDR0 = 0xd3f0904c;
- GPDR1 = 0xfcffb7d3;
- GPDR2 = 0x0001ffff;
-
- /* Output Register */
- GPCR0 = 0x00000000;
- GPCR1 = 0x00000000;
- GPCR2 = 0x00000000;
-
- GPSR0 = 0x00400000;
- GPSR1 = 0x00000000;
- GPSR2 = 0x00000000;
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config));
+
+ platform_scoop_config = &poodle_pcmcia_config;
+
+ ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+ if (ret)
+ pr_warning("poodle: Unable to register LoCoMo device\n");
set_pxa_fb_parent(&poodle_locomo_device.dev);
set_pxa_fb_info(&poodle_fb_info);
- pxa_gpio_mode(POODLE_GPIO_USB_PULLUP | GPIO_OUT);
- pxa_gpio_mode(POODLE_GPIO_IR_ON | GPIO_OUT);
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&poodle_mci_platform_data);
pxa_set_ficp_info(&poodle_ficp_platform_data);
pxa_set_i2c_info(NULL);
-
- platform_scoop_config = &poodle_pcmcia_config;
-
- ret = platform_add_devices(devices, ARRAY_SIZE(devices));
- if (ret) {
- printk(KERN_WARNING "poodle: Unable to register LoCoMo device\n");
- }
- corgi_ssp_set_machinfo(&poodle_ssp_machinfo);
+ poodle_init_spi();
}
static void __init fixup_poodle(struct machine_desc *desc,
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 305452b56e91..25d17a1dab78 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -36,6 +36,12 @@
#include "devices.h"
#include "clock.h"
+int cpu_is_pxa26x(void)
+{
+ return cpu_is_pxa250() && ((BOOT_DEF & 0x8) == 0);
+}
+EXPORT_SYMBOL_GPL(cpu_is_pxa26x);
+
/*
* Various clock factors driven by the CCCR register.
*/
@@ -203,48 +209,21 @@ static struct clk pxa25x_clks[] = {
* More ones like CP and general purpose register values are preserved
* with the stack pointer in sleep.S.
*/
-enum { SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
-
- SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
- SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
- SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U,
-
+enum {
SLEEP_SAVE_PSTR,
-
SLEEP_SAVE_CKEN,
-
SLEEP_SAVE_COUNT
};
static void pxa25x_cpu_pm_save(unsigned long *sleep_save)
{
- SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2);
-
- SAVE(GAFR0_L); SAVE(GAFR0_U);
- SAVE(GAFR1_L); SAVE(GAFR1_U);
- SAVE(GAFR2_L); SAVE(GAFR2_U);
-
SAVE(CKEN);
SAVE(PSTR);
-
- /* Clear GPIO transition detect bits */
- GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2;
}
static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
{
- /* ensure not to come back here if it wasn't intended */
- PSPR = 0;
-
- /* restore registers */
- RESTORE(GAFR0_L); RESTORE(GAFR0_U);
- RESTORE(GAFR1_L); RESTORE(GAFR1_U);
- RESTORE(GAFR2_L); RESTORE(GAFR2_U);
- RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
-
- PSSR = PSSR_RDH | PSSR_PH;
-
RESTORE(CKEN);
RESTORE(PSTR);
}
@@ -256,19 +235,32 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state)
switch (state) {
case PM_SUSPEND_MEM:
- /* set resume return address */
- PSPR = virt_to_phys(pxa_cpu_resume);
pxa25x_cpu_suspend(PWRMODE_SLEEP);
break;
}
}
+static int pxa25x_cpu_pm_prepare(void)
+{
+ /* set resume return address */
+ PSPR = virt_to_phys(pxa_cpu_resume);
+ return 0;
+}
+
+static void pxa25x_cpu_pm_finish(void)
+{
+ /* ensure not to come back here if it wasn't intended */
+ PSPR = 0;
+}
+
static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = {
.save_count = SLEEP_SAVE_COUNT,
.valid = suspend_valid_only_mem,
.save = pxa25x_cpu_pm_save,
.restore = pxa25x_cpu_pm_restore,
.enter = pxa25x_cpu_pm_enter,
+ .prepare = pxa25x_cpu_pm_prepare,
+ .finish = pxa25x_cpu_pm_finish,
};
static void __init pxa25x_init_pm(void)
@@ -330,6 +322,8 @@ static struct sys_device pxa25x_sysdev[] = {
{
.cls = &pxa_irq_sysclass,
}, {
+ .cls = &pxa2xx_mfp_sysclass,
+ }, {
.cls = &pxa_gpio_sysclass,
},
};
@@ -338,11 +332,7 @@ static int __init pxa25x_init(void)
{
int i, ret = 0;
- /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
- if (cpu_is_pxa255())
- clks_register(&pxa25x_hwuart_clk, 1);
-
- if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
+ if (cpu_is_pxa25x()) {
reset_status = RCSR;
@@ -365,9 +355,11 @@ static int __init pxa25x_init(void)
return ret;
}
- /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
- if (cpu_is_pxa255())
+ /* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
+ if (cpu_is_pxa255() || cpu_is_pxa26x()) {
+ clks_register(&pxa25x_hwuart_clk, 1);
ret = platform_device_register(&pxa_device_hwuart);
+ }
return ret;
}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index f9f6a9c31f4b..3e4ab2279c99 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -34,6 +34,13 @@
#include "devices.h"
#include "clock.h"
+void pxa27x_clear_otgph(void)
+{
+ if (cpu_is_pxa27x() && (PSSR & PSSR_OTGPH))
+ PSSR |= PSSR_OTGPH;
+}
+EXPORT_SYMBOL(pxa27x_clear_otgph);
+
/* Crystal clock: 13MHz */
#define BASE_CLK 13000000
@@ -183,36 +190,18 @@ static struct clk pxa27x_clks[] = {
* More ones like CP and general purpose register values are preserved
* with the stack pointer in sleep.S.
*/
-enum { SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
-
- SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
- SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
- SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U,
- SLEEP_SAVE_GAFR3_L, SLEEP_SAVE_GAFR3_U,
-
+enum {
SLEEP_SAVE_PSTR,
-
SLEEP_SAVE_CKEN,
-
SLEEP_SAVE_MDREFR,
- SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
- SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,
-
+ SLEEP_SAVE_PCFR,
SLEEP_SAVE_COUNT
};
void pxa27x_cpu_pm_save(unsigned long *sleep_save)
{
- SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); SAVE(PGSR3);
-
- SAVE(GAFR0_L); SAVE(GAFR0_U);
- SAVE(GAFR1_L); SAVE(GAFR1_U);
- SAVE(GAFR2_L); SAVE(GAFR2_U);
- SAVE(GAFR3_L); SAVE(GAFR3_U);
-
SAVE(MDREFR);
- SAVE(PWER); SAVE(PCFR); SAVE(PRER);
- SAVE(PFER); SAVE(PKWR);
+ SAVE(PCFR);
SAVE(CKEN);
SAVE(PSTR);
@@ -220,24 +209,12 @@ void pxa27x_cpu_pm_save(unsigned long *sleep_save)
void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
{
- /* ensure not to come back here if it wasn't intended */
- PSPR = 0;
-
- /* restore registers */
- RESTORE(GAFR0_L); RESTORE(GAFR0_U);
- RESTORE(GAFR1_L); RESTORE(GAFR1_U);
- RESTORE(GAFR2_L); RESTORE(GAFR2_U);
- RESTORE(GAFR3_L); RESTORE(GAFR3_U);
- RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); RESTORE(PGSR3);
-
RESTORE(MDREFR);
- RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER);
- RESTORE(PFER); RESTORE(PKWR);
+ RESTORE(PCFR);
PSSR = PSSR_RDH | PSSR_PH;
RESTORE(CKEN);
-
RESTORE(PSTR);
}
@@ -259,8 +236,6 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
pxa_cpu_standby();
break;
case PM_SUSPEND_MEM:
- /* set resume return address */
- PSPR = virt_to_phys(pxa_cpu_resume);
pxa27x_cpu_suspend(PWRMODE_SLEEP);
break;
}
@@ -271,12 +246,27 @@ static int pxa27x_cpu_pm_valid(suspend_state_t state)
return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
}
+static int pxa27x_cpu_pm_prepare(void)
+{
+ /* set resume return address */
+ PSPR = virt_to_phys(pxa_cpu_resume);
+ return 0;
+}
+
+static void pxa27x_cpu_pm_finish(void)
+{
+ /* ensure not to come back here if it wasn't intended */
+ PSPR = 0;
+}
+
static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = {
.save_count = SLEEP_SAVE_COUNT,
.save = pxa27x_cpu_pm_save,
.restore = pxa27x_cpu_pm_restore,
.valid = pxa27x_cpu_pm_valid,
.enter = pxa27x_cpu_pm_enter,
+ .prepare = pxa27x_cpu_pm_prepare,
+ .finish = pxa27x_cpu_pm_finish,
};
static void __init pxa27x_init_pm(void)
@@ -349,7 +339,7 @@ struct platform_device pxa27x_device_i2c_power = {
.num_resources = ARRAY_SIZE(i2c_power_resources),
};
-void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
{
local_irq_disable();
PCFR |= PCFR_PI2CEN;
@@ -376,6 +366,8 @@ static struct sys_device pxa27x_sysdev[] = {
{
.cls = &pxa_irq_sysclass,
}, {
+ .cls = &pxa2xx_mfp_sysclass,
+ }, {
.cls = &pxa_gpio_sysclass,
},
};
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 03cbc38103ed..b3cd5d0b0f35 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -203,6 +203,19 @@ static const struct clkops clk_pout_ops = {
.disable = clk_pout_disable,
};
+static void clk_dummy_enable(struct clk *clk)
+{
+}
+
+static void clk_dummy_disable(struct clk *clk)
+{
+}
+
+static const struct clkops clk_dummy_ops = {
+ .enable = clk_dummy_enable,
+ .disable = clk_dummy_disable,
+};
+
static struct clk pxa3xx_clks[] = {
{
.name = "CLK_POUT",
@@ -211,6 +224,13 @@ static struct clk pxa3xx_clks[] = {
.delay = 70,
},
+ /* Power I2C clock is always on */
+ {
+ .name = "I2CCLK",
+ .ops = &clk_dummy_ops,
+ .dev = &pxa3xx_device_i2c_power.dev,
+ },
+
PXA3xx_CK("LCDCLK", LCD, &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev),
PXA3xx_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL),
PXA3xx_CK("AC97CLK", AC97, &clk_pxa3xx_ac97_ops, NULL),
@@ -509,6 +529,30 @@ void __init pxa3xx_init_irq(void)
* device registration specific to PXA3xx.
*/
+static struct resource i2c_power_resources[] = {
+ {
+ .start = 0x40f500c0,
+ .end = 0x40f500d3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PWRI2C,
+ .end = IRQ_PWRI2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa3xx_device_i2c_power = {
+ .name = "pxa2xx-i2c",
+ .id = 1,
+ .resource = i2c_power_resources,
+ .num_resources = ARRAY_SIZE(i2c_power_resources),
+};
+
+void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+{
+ pxa3xx_device_i2c_power.dev.platform_data = info;
+}
+
static struct platform_device *devices[] __initdata = {
/* &pxa_device_udc, The UDC driver is PXA25x only */
&pxa_device_ffuart,
@@ -522,6 +566,7 @@ static struct platform_device *devices[] __initdata = {
&pxa3xx_device_ssp4,
&pxa27x_device_pwm0,
&pxa27x_device_pwm1,
+ &pxa3xx_device_i2c_power,
};
static struct sys_device pxa3xx_sysdev[] = {
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index e804ae09370c..15c2f1a8623b 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -116,24 +116,20 @@ struct battery_thresh spitz_battery_levels_noac[] = {
{ 0, 0},
};
-/* MAX1111 Commands */
-#define MAXCTRL_PD0 1u << 0
-#define MAXCTRL_PD1 1u << 1
-#define MAXCTRL_SGL 1u << 2
-#define MAXCTRL_UNI 1u << 3
-#define MAXCTRL_SEL_SH 4
-#define MAXCTRL_STR 1u << 7
-
/*
* Read MAX1111 ADC
*/
+extern int max1111_read_channel(int);
+
int sharpsl_pm_pxa_read_max1111(int channel)
{
if (machine_is_tosa()) // Ugly, better move this function into another module
return 0;
- return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
- | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
+ /* max1111 accepts channels from 0-3, however,
+ * it is encoded from 0-7 here in the code.
+ */
+ return max1111_read_channel(channel >> 1);
}
void sharpsl_pm_pxa_init(void)
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 7e181afcca39..9b4f24c7c055 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -19,10 +19,17 @@
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
#include <linux/mmc/host.h>
#include <linux/pm.h>
#include <linux/backlight.h>
#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/corgi_lcd.h>
#include <asm/setup.h>
#include <asm/memory.h>
@@ -37,7 +44,7 @@
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/reset.h>
#include <mach/i2c.h>
@@ -46,7 +53,7 @@
#include <mach/ohci.h>
#include <mach/udc.h>
#include <mach/pxafb.h>
-#include <mach/akita.h>
+#include <mach/pxa2xx_spi.h>
#include <mach/spitz.h>
#include <mach/sharpsl.h>
@@ -57,6 +64,66 @@
#include "devices.h"
#include "sharpsl.h"
+static unsigned long spitz_pin_config[] __initdata = {
+ /* Chip Selects */
+ GPIO78_nCS_2, /* SCOOP #2 */
+ GPIO80_nCS_4, /* SCOOP #1 */
+
+ /* LCD - 16bpp Active TFT */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+
+ /* PC Card */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO79_PSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO112_MMC_CMD,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+
+ /* GPIOs */
+ GPIO9_GPIO, /* SPITZ_GPIO_nSD_DETECT */
+ GPIO81_GPIO, /* SPITZ_GPIO_nSD_WP */
+ GPIO41_GPIO, /* SPITZ_GPIO_USB_CONNECT */
+ GPIO37_GPIO, /* SPITZ_GPIO_USB_HOST */
+ GPIO35_GPIO, /* SPITZ_GPIO_USB_DEVICE */
+ GPIO22_GPIO, /* SPITZ_GPIO_HSYNC */
+ GPIO94_GPIO, /* SPITZ_GPIO_CF_CD */
+ GPIO105_GPIO, /* SPITZ_GPIO_CF_IRQ */
+ GPIO106_GPIO, /* SPITZ_GPIO_CF2_IRQ */
+
+ GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
/*
* Spitz SCOOP Device #1
*/
@@ -69,10 +136,11 @@ static struct resource spitz_scoop_resources[] = {
};
static struct scoop_config spitz_scoop_setup = {
- .io_dir = SPITZ_SCP_IO_DIR,
+ .io_dir = SPITZ_SCP_IO_DIR,
.io_out = SPITZ_SCP_IO_OUT,
- .suspend_clr = SPITZ_SCP_SUS_CLR,
- .suspend_set = SPITZ_SCP_SUS_SET,
+ .suspend_clr = SPITZ_SCP_SUS_CLR,
+ .suspend_set = SPITZ_SCP_SUS_SET,
+ .gpio_base = SPITZ_SCP_GPIO_BASE,
};
struct platform_device spitzscoop_device = {
@@ -97,10 +165,11 @@ static struct resource spitz_scoop2_resources[] = {
};
static struct scoop_config spitz_scoop2_setup = {
- .io_dir = SPITZ_SCP2_IO_DIR,
+ .io_dir = SPITZ_SCP2_IO_DIR,
.io_out = SPITZ_SCP2_IO_OUT,
- .suspend_clr = SPITZ_SCP2_SUS_CLR,
- .suspend_set = SPITZ_SCP2_SUS_SET,
+ .suspend_clr = SPITZ_SCP2_SUS_CLR,
+ .suspend_set = SPITZ_SCP2_SUS_SET,
+ .gpio_base = SPITZ_SCP2_GPIO_BASE,
};
struct platform_device spitzscoop2_device = {
@@ -122,7 +191,7 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
if (new_cpr & 0x0007) {
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+ gpio_set_value(SPITZ_GPIO_CF_POWER, 1);
if (!(cpr & 0x0002) && !(cpr & 0x0004))
mdelay(5);
if (device == SPITZ_PWR_CF)
@@ -138,34 +207,13 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000);
mdelay(1);
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+ gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
} else {
write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
}
}
}
-static void spitz_pcmcia_init(void)
-{
- /* Setup default state of GPIO outputs
- before we enable them as outputs. */
- GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
- GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
- GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO54_nPCE_2);
- GPSR(GPIO85_nPCE_1) = GPIO_bit(GPIO85_nPCE_1);
-
- pxa_gpio_mode(GPIO48_nPOE_MD);
- pxa_gpio_mode(GPIO49_nPWE_MD);
- pxa_gpio_mode(GPIO50_nPIOR_MD);
- pxa_gpio_mode(GPIO51_nPIOW_MD);
- pxa_gpio_mode(GPIO55_nPREG_MD);
- pxa_gpio_mode(GPIO56_nPWAIT_MD);
- pxa_gpio_mode(GPIO57_nIOIS16_MD);
- pxa_gpio_mode(GPIO85_nPCE_1_MD);
- pxa_gpio_mode(GPIO54_nPCE_2_MD);
- pxa_gpio_mode(GPIO104_pSKTSEL_MD);
-}
-
static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr)
{
/* Only need to override behaviour for slot 0 */
@@ -191,165 +239,169 @@ static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
static struct scoop_pcmcia_config spitz_pcmcia_config = {
.devs = &spitz_pcmcia_scoop[0],
.num_devs = 2,
- .pcmcia_init = spitz_pcmcia_init,
.power_ctrl = spitz_pcmcia_pwr,
};
EXPORT_SYMBOL(spitzscoop_device);
EXPORT_SYMBOL(spitzscoop2_device);
-
/*
- * Spitz SSP Device
- *
- * Set the parent as the scoop device because a lot of SSP devices
- * also use scoop functions and this makes the power up/down order
- * work correctly.
+ * Spitz Keyboard Device
*/
-struct platform_device spitzssp_device = {
- .name = "corgi-ssp",
- .dev = {
- .parent = &spitzscoop_device.dev,
- },
+static struct platform_device spitzkbd_device = {
+ .name = "spitz-keyboard",
.id = -1,
};
-struct corgissp_machinfo spitz_ssp_machinfo = {
- .port = 2,
- .cs_lcdcon = SPITZ_GPIO_LCDCON_CS,
- .cs_ads7846 = SPITZ_GPIO_ADS7846_CS,
- .cs_max1111 = SPITZ_GPIO_MAX1111_CS,
- .clk_lcdcon = 520,
- .clk_ads7846 = 14,
- .clk_max1111 = 56,
-};
-
/*
- * Spitz Backlight Device
+ * Spitz LEDs
*/
-static void spitz_bl_kick_battery(void)
-{
- void (*kick_batt)(void);
-
- kick_batt = symbol_get(sharpsl_battery_kick);
- if (kick_batt) {
- kick_batt();
- symbol_put(sharpsl_battery_kick);
- }
-}
-
-static struct generic_bl_info spitz_bl_machinfo = {
- .name = "corgi-bl",
- .default_intensity = 0x1f,
- .limit_mask = 0x0b,
- .max_intensity = 0x2f,
- .kick_battery = spitz_bl_kick_battery,
-};
-
-static struct platform_device spitzbl_device = {
- .name = "generic-bl",
- .dev = {
- .platform_data = &spitz_bl_machinfo,
+static struct gpio_led spitz_gpio_leds[] = {
+ {
+ .name = "spitz:amber:charge",
+ .default_trigger = "sharpsl-charge",
+ .gpio = SPITZ_GPIO_LED_ORANGE,
+ },
+ {
+ .name = "spitz:green:hddactivity",
+ .default_trigger = "ide-disk",
+ .gpio = SPITZ_GPIO_LED_GREEN,
},
- .id = -1,
};
-
-/*
- * Spitz Keyboard Device
- */
-static struct platform_device spitzkbd_device = {
- .name = "spitz-keyboard",
- .id = -1,
+static struct gpio_led_platform_data spitz_gpio_leds_info = {
+ .leds = spitz_gpio_leds,
+ .num_leds = ARRAY_SIZE(spitz_gpio_leds),
};
-
-/*
- * Spitz LEDs
- */
static struct platform_device spitzled_device = {
- .name = "spitz-led",
+ .name = "leds-gpio",
.id = -1,
+ .dev = {
+ .platform_data = &spitz_gpio_leds_info,
+ },
};
-/*
- * Spitz Touch Screen Device
- */
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master spitz_spi_info = {
+ .num_chipselect = 3,
+};
-static unsigned long (*get_hsync_invperiod)(struct device *dev);
+static struct ads7846_platform_data spitz_ads7846_info = {
+ .model = 7846,
+ .vref_delay_usecs = 100,
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .gpio_pendown = SPITZ_GPIO_TP_INT,
+};
-static void inline sharpsl_wait_sync(int gpio)
+static void spitz_ads7846_cs(u32 command)
{
- while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
- while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
+ gpio_set_value(SPITZ_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
}
-static struct device *spitz_pxafb_dev;
+static struct pxa2xx_spi_chip spitz_ads7846_chip = {
+ .cs_control = spitz_ads7846_cs,
+};
-static int is_pxafb_device(struct device * dev, void * data)
+static void spitz_bl_kick_battery(void)
{
- struct platform_device *pdev = container_of(dev, struct platform_device, dev);
-
- return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
-}
+ void (*kick_batt)(void);
-static unsigned long spitz_get_hsync_invperiod(void)
-{
-#ifdef CONFIG_FB_PXA
- if (!spitz_pxafb_dev) {
- spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
- if (!spitz_pxafb_dev)
- return 0;
+ kick_batt = symbol_get(sharpsl_battery_kick);
+ if (kick_batt) {
+ kick_batt();
+ symbol_put(sharpsl_battery_kick);
}
- if (!get_hsync_invperiod)
- get_hsync_invperiod = symbol_get(pxafb_get_hsync_time);
- if (!get_hsync_invperiod)
-#endif
- return 0;
-
- return get_hsync_invperiod(spitz_pxafb_dev);
}
-static void spitz_put_hsync(void)
-{
- put_device(spitz_pxafb_dev);
- if (get_hsync_invperiod)
- symbol_put(pxafb_get_hsync_time);
- spitz_pxafb_dev = NULL;
- get_hsync_invperiod = NULL;
-}
+static struct corgi_lcd_platform_data spitz_lcdcon_info = {
+ .init_mode = CORGI_LCD_MODE_VGA,
+ .max_intensity = 0x2f,
+ .default_intensity = 0x1f,
+ .limit_mask = 0x0b,
+ .gpio_backlight_cont = SPITZ_GPIO_BACKLIGHT_CONT,
+ .gpio_backlight_on = SPITZ_GPIO_BACKLIGHT_ON,
+ .kick_battery = spitz_bl_kick_battery,
+};
-static void spitz_wait_hsync(void)
+static void spitz_lcdcon_cs(u32 command)
{
- sharpsl_wait_sync(SPITZ_GPIO_HSYNC);
+ gpio_set_value(SPITZ_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
}
-static struct resource spitzts_resources[] = {
- [0] = {
- .start = SPITZ_IRQ_GPIO_TP_INT,
- .end = SPITZ_IRQ_GPIO_TP_INT,
- .flags = IORESOURCE_IRQ,
- },
+static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
+ .cs_control = spitz_lcdcon_cs,
};
-static struct corgits_machinfo spitz_ts_machinfo = {
- .get_hsync_invperiod = spitz_get_hsync_invperiod,
- .put_hsync = spitz_put_hsync,
- .wait_hsync = spitz_wait_hsync,
+static void spitz_max1111_cs(u32 command)
+{
+ gpio_set_value(SPITZ_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip spitz_max1111_chip = {
+ .cs_control = spitz_max1111_cs,
};
-static struct platform_device spitzts_device = {
- .name = "corgi-ts",
- .dev = {
- .parent = &spitzssp_device.dev,
- .platform_data = &spitz_ts_machinfo,
+static struct spi_board_info spitz_spi_devices[] = {
+ {
+ .modalias = "ads7846",
+ .max_speed_hz = 1200000,
+ .bus_num = 2,
+ .chip_select = 0,
+ .platform_data = &spitz_ads7846_info,
+ .controller_data= &spitz_ads7846_chip,
+ .irq = gpio_to_irq(SPITZ_GPIO_TP_INT),
+ }, {
+ .modalias = "corgi-lcd",
+ .max_speed_hz = 50000,
+ .bus_num = 2,
+ .chip_select = 1,
+ .platform_data = &spitz_lcdcon_info,
+ .controller_data= &spitz_lcdcon_chip,
+ }, {
+ .modalias = "max1111",
+ .max_speed_hz = 450000,
+ .bus_num = 2,
+ .chip_select = 2,
+ .controller_data= &spitz_max1111_chip,
},
- .id = -1,
- .num_resources = ARRAY_SIZE(spitzts_resources),
- .resource = spitzts_resources,
};
+static void __init spitz_init_spi(void)
+{
+ int err;
+
+ err = gpio_request(SPITZ_GPIO_ADS7846_CS, "ADS7846_CS");
+ if (err)
+ return;
+
+ err = gpio_request(SPITZ_GPIO_LCDCON_CS, "LCDCON_CS");
+ if (err)
+ goto err_free_1;
+
+ err = gpio_request(SPITZ_GPIO_MAX1111_CS, "MAX1111_CS");
+ if (err)
+ goto err_free_2;
+
+ if (machine_is_akita()) {
+ spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
+ spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
+ }
+
+ pxa2xx_set_spi_info(2, &spitz_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
+ return;
+
+err_free_2:
+ gpio_free(SPITZ_GPIO_LCDCON_CS);
+err_free_1:
+ gpio_free(SPITZ_GPIO_ADS7846_CS);
+}
+#else
+static inline void spitz_init_spi(void) {}
+#endif
/*
* MMC/SD Device
@@ -364,24 +416,35 @@ static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, vo
{
int err;
- /* setup GPIO for PXA27x MMC controller */
- pxa_gpio_mode(GPIO32_MMCCLK_MD);
- pxa_gpio_mode(GPIO112_MMCCMD_MD);
- pxa_gpio_mode(GPIO92_MMCDAT0_MD);
- pxa_gpio_mode(GPIO109_MMCDAT1_MD);
- pxa_gpio_mode(GPIO110_MMCDAT2_MD);
- pxa_gpio_mode(GPIO111_MMCDAT3_MD);
- pxa_gpio_mode(SPITZ_GPIO_nSD_DETECT | GPIO_IN);
- pxa_gpio_mode(SPITZ_GPIO_nSD_WP | GPIO_IN);
+ err = gpio_request(SPITZ_GPIO_nSD_DETECT, "nSD_DETECT");
+ if (err)
+ goto err_out;
+
+ err = gpio_request(SPITZ_GPIO_nSD_WP, "nSD_WP");
+ if (err)
+ goto err_free_1;
+
+ gpio_direction_input(SPITZ_GPIO_nSD_DETECT);
+ gpio_direction_input(SPITZ_GPIO_nSD_WP);
spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING,
"MMC card detect", data);
- if (err)
- printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+ if (err) {
+ pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
+ __func__);
+ goto err_free_2;
+ }
+ return 0;
+err_free_2:
+ gpio_free(SPITZ_GPIO_nSD_WP);
+err_free_1:
+ gpio_free(SPITZ_GPIO_nSD_DETECT);
+err_out:
return err;
}
@@ -397,12 +460,14 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
static int spitz_mci_get_ro(struct device *dev)
{
- return GPLR(SPITZ_GPIO_nSD_WP) & GPIO_bit(SPITZ_GPIO_nSD_WP);
+ return gpio_get_value(SPITZ_GPIO_nSD_WP);
}
static void spitz_mci_exit(struct device *dev, void *data)
{
free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data);
+ gpio_free(SPITZ_GPIO_nSD_WP);
+ gpio_free(SPITZ_GPIO_nSD_DETECT);
}
static struct pxamci_platform_data spitz_mci_platform_data = {
@@ -419,27 +484,24 @@ static struct pxamci_platform_data spitz_mci_platform_data = {
*/
static int spitz_ohci_init(struct device *dev)
{
- /* Only Port 2 is connected */
- pxa_gpio_mode(SPITZ_GPIO_USB_CONNECT | GPIO_IN);
- pxa_gpio_mode(SPITZ_GPIO_USB_HOST | GPIO_OUT);
- pxa_gpio_mode(SPITZ_GPIO_USB_DEVICE | GPIO_IN);
-
- /* Setup USB Port 2 Output Control Register */
- UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-
- GPSR(SPITZ_GPIO_USB_HOST) = GPIO_bit(SPITZ_GPIO_USB_HOST);
+ int err;
- UHCHR = (UHCHR) &
- ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
+ err = gpio_request(SPITZ_GPIO_USB_HOST, "USB_HOST");
+ if (err)
+ return err;
- UHCRHDA |= UHCRHDA_NOCP;
+ /* Only Port 2 is connected
+ * Setup USB Port 2 Output Control Register
+ */
+ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
- return 0;
+ return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
}
static struct pxaohci_platform_data spitz_ohci_platform_data = {
.port_mode = PMM_NPS_MODE,
.init = spitz_ohci_init,
+ .flags = ENABLE_PORT_ALL | NO_OC_PROTECTION,
.power_budget = 150,
};
@@ -447,29 +509,50 @@ static struct pxaohci_platform_data spitz_ohci_platform_data = {
/*
* Irda
*/
+static int spitz_irda_startup(struct device *dev)
+{
+ int rc;
+
+ rc = gpio_request(SPITZ_GPIO_IR_ON, "IrDA on");
+ if (rc)
+ goto err;
+
+ rc = gpio_direction_output(SPITZ_GPIO_IR_ON, 1);
+ if (rc)
+ goto err_dir;
+
+ return 0;
+
+err_dir:
+ gpio_free(SPITZ_GPIO_IR_ON);
+err:
+ return rc;
+}
+
+static void spitz_irda_shutdown(struct device *dev)
+{
+ gpio_free(SPITZ_GPIO_IR_ON);
+}
+
static void spitz_irda_transceiver_mode(struct device *dev, int mode)
{
- if (mode & IR_OFF)
- set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
- else
- reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+ gpio_set_value(SPITZ_GPIO_IR_ON, mode & IR_OFF);
pxa2xx_transceiver_mode(dev, mode);
}
#ifdef CONFIG_MACH_AKITA
static void akita_irda_transceiver_mode(struct device *dev, int mode)
{
- if (mode & IR_OFF)
- akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
- else
- akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
+ gpio_set_value(AKITA_GPIO_IR_ON, mode & IR_OFF);
pxa2xx_transceiver_mode(dev, mode);
}
#endif
static struct pxaficp_platform_data spitz_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = spitz_irda_transceiver_mode,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = spitz_irda_transceiver_mode,
+ .startup = spitz_irda_startup,
+ .shutdown = spitz_irda_shutdown,
};
@@ -477,14 +560,6 @@ static struct pxaficp_platform_data spitz_ficp_platform_data = {
* Spitz PXA Framebuffer
*/
-static void spitz_lcd_power(int on, struct fb_var_screeninfo *var)
-{
- if (on)
- corgi_lcdtg_hw_init(var->xres);
- else
- corgi_lcdtg_suspend();
-}
-
static struct pxafb_mode_info spitz_pxafb_modes[] = {
{
.pixclock = 19231,
@@ -517,18 +592,13 @@ static struct pxafb_mach_info spitz_pxafb_info = {
.modes = &spitz_pxafb_modes[0],
.num_modes = 2,
.fixed_modes = 1,
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act | LCCR0_LDDALT | LCCR0_OUC | LCCR0_CMDIM | LCCR0_RDSTM,
- .lccr3 = LCCR3_PixRsEdg | LCCR3_OutEnH,
- .pxafb_lcd_power = spitz_lcd_power,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING,
};
static struct platform_device *devices[] __initdata = {
&spitzscoop_device,
- &spitzssp_device,
&spitzkbd_device,
- &spitzts_device,
- &spitzbl_device,
&spitzled_device,
};
@@ -554,57 +624,26 @@ static void __init common_init(void)
PMCR = 0x00;
- /* setup sleep mode values */
- PWER = 0x00000002;
- PFER = 0x00000000;
- PRER = 0x00000002;
- PGSR0 = 0x0158C000;
- PGSR1 = 0x00FF0080;
- PGSR2 = 0x0001C004;
-
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
PCFR |= PCFR_OPDE;
- corgi_ssp_set_machinfo(&spitz_ssp_machinfo);
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config));
- pxa_gpio_mode(SPITZ_GPIO_HSYNC | GPIO_IN);
+ spitz_init_spi();
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_mci_info(&spitz_mci_platform_data);
pxa_set_ohci_info(&spitz_ohci_platform_data);
pxa_set_ficp_info(&spitz_ficp_platform_data);
- set_pxa_fb_parent(&spitzssp_device.dev);
set_pxa_fb_info(&spitz_pxafb_info);
pxa_set_i2c_info(NULL);
}
#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
-static void spitz_bl_set_intensity(int intensity)
-{
- if (intensity > 0x10)
- intensity += 0x10;
-
- /* Bits 0-4 are accessed via the SSP interface */
- corgi_ssp_blduty_set(intensity & 0x1f);
-
- /* Bit 5 is via SCOOP */
- if (intensity & 0x0020)
- reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
- else
- set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
-
- if (intensity)
- set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
- else
- reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
-}
-
static void __init spitz_init(void)
{
platform_scoop_config = &spitz_pcmcia_config;
- spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity;
-
common_init();
platform_device_register(&spitzscoop2_device);
@@ -615,32 +654,17 @@ static void __init spitz_init(void)
/*
* Akita IO Expander
*/
-struct platform_device akitaioexp_device = {
- .name = "akita-ioexp",
- .id = -1,
+static struct pca953x_platform_data akita_ioexp = {
+ .gpio_base = AKITA_IOEXP_GPIO_BASE,
};
-EXPORT_SYMBOL_GPL(akitaioexp_device);
-
-static void akita_bl_set_intensity(int intensity)
-{
- if (intensity > 0x10)
- intensity += 0x10;
-
- /* Bits 0-4 are accessed via the SSP interface */
- corgi_ssp_blduty_set(intensity & 0x1f);
-
- /* Bit 5 is via IO-Expander */
- if (intensity & 0x0020)
- akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
- else
- akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
-
- if (intensity)
- akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
- else
- akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
-}
+static struct i2c_board_info akita_i2c_board_info[] = {
+ {
+ .type = "max7310",
+ .addr = 0x18,
+ .platform_data = &akita_ioexp,
+ },
+};
static void __init akita_init(void)
{
@@ -649,11 +673,10 @@ static void __init akita_init(void)
/* We just pretend the second element of the array doesn't exist */
spitz_pcmcia_config.num_devs = 1;
platform_scoop_config = &spitz_pcmcia_config;
- spitz_bl_machinfo.set_bl_intensity = akita_bl_set_intensity;
- platform_device_register(&akitaioexp_device);
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
- spitzscoop_device.dev.parent = &akitaioexp_device.dev;
common_init();
}
#endif
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 8a40505dfd28..53018db106ac 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -21,7 +21,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
-#include <asm/hardware/scoop.h>
#include <mach/sharpsl.h>
#include <mach/spitz.h>
@@ -48,44 +47,35 @@ static void spitz_charger_init(void)
static void spitz_measure_temp(int on)
{
- if (on)
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON);
- else
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON);
+ gpio_set_value(SPITZ_GPIO_ADC_TEMP_ON, on);
}
static void spitz_charge(int on)
{
if (on) {
if (sharpsl_pm.flags & SHARPSL_SUSPENDED) {
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+ gpio_set_value(SPITZ_GPIO_JK_B, 1);
+ gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
} else {
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+ gpio_set_value(SPITZ_GPIO_JK_B, 0);
+ gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
}
} else {
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+ gpio_set_value(SPITZ_GPIO_JK_B, 0);
+ gpio_set_value(SPITZ_GPIO_CHRG_ON, 1);
}
}
static void spitz_discharge(int on)
{
- if (on)
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A);
- else
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A);
+ gpio_set_value(SPITZ_GPIO_JK_A, on);
}
/* HACK - For unknown reasons, accurate voltage readings are only made with a load
on the power bus which the green led on spitz provides */
static void spitz_discharge1(int on)
{
- if (on)
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
- else
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
+ gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
}
static void spitz_presuspend(void)
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 67e18509d7bf..18d149745837 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -155,7 +155,7 @@ static void __init pxa_timer_init(void)
OIER = 0;
OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
- if (cpu_is_pxa21x() || cpu_is_pxa25x())
+ if (cpu_is_pxa25x())
clock_tick_rate = 3686400;
else if (machine_is_mainstone())
clock_tick_rate = 3249600;
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 3ed757e6bcc8..a13dbf3c2c05 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -22,8 +22,8 @@
#include <linux/fb.h>
#include <linux/ioport.h>
#include <linux/delay.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/mtd.h>
+#include <linux/gpio.h>
+#include <linux/dm9000.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
@@ -31,7 +31,6 @@
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/sizes.h>
@@ -40,41 +39,148 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
+#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa2xx_spi.h>
#include <mach/trizeps4.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
+#include <mach/i2c.h>
#include "generic.h"
#include "devices.h"
-/********************************************************************************************
+/* comment out the following line if you want to use the
+ * Standard UART from PXA for serial / irda transmission
+ * and acivate it if you have status leds connected */
+#define STATUS_LEDS_ON_STUART_PINS 1
+
+/*****************************************************************************
+ * MultiFunctionPins of CPU
+ *****************************************************************************/
+static unsigned long trizeps4_pin_config[] __initdata = {
+ /* Chip Selects */
+ GPIO15_nCS_1, /* DiskOnChip CS */
+ GPIO93_GPIO, /* TRIZEPS4_DOC_IRQ */
+ GPIO94_GPIO, /* DOC lock */
+
+ GPIO78_nCS_2, /* DM9000 CS */
+ GPIO101_GPIO, /* TRIZEPS4_ETH_IRQ */
+
+ GPIO79_nCS_3, /* Logic CS */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, /* Logic irq */
+
+ /* LCD - 16bpp Active TFT */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* UART */
+ GPIO9_FFUART_CTS,
+ GPIO10_FFUART_DCD,
+ GPIO16_FFUART_TXD,
+ GPIO33_FFUART_DSR,
+ GPIO38_FFUART_RI,
+ GPIO82_FFUART_DTR,
+ GPIO83_FFUART_RTS,
+ GPIO96_FFUART_RXD,
+
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+#ifdef STATUS_LEDS_ON_STUART_PINS
+ GPIO46_GPIO,
+ GPIO47_GPIO,
+#else
+ GPIO46_STUART_RXD,
+ GPIO47_STUART_TXD,
+#endif
+ /* PCMCIA */
+ GPIO11_GPIO, /* TRIZEPS4_CD_IRQ */
+ GPIO13_GPIO, /* TRIZEPS4_READY_NINT */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO102_nPCE_1,
+ GPIO104_PSKTSEL,
+
+ /* MultiMediaCard */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO12_GPIO, /* TRIZEPS4_MMC_IRQ */
+
+ /* USB OHCI */
+ GPIO88_USBH1_PWR, /* USBHPWR1 */
+ GPIO89_USBH1_PEN, /* USBHPEN1 */
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+};
+
+static unsigned long trizeps4wl_pin_config[] __initdata = {
+ /* SSP 2 */
+ GPIO14_SSP2_SFRM,
+ GPIO19_SSP2_SCLK,
+ GPIO53_GPIO, /* TRIZEPS4_SPI_IRQ */
+ GPIO86_SSP2_RXD,
+ GPIO87_SSP2_TXD,
+};
+
+/****************************************************************************
* ONBOARD FLASH
- ********************************************************************************************/
+ ****************************************************************************/
static struct mtd_partition trizeps4_partitions[] = {
{
.name = "Bootloader",
.offset = 0x00000000,
.size = 0x00040000,
.mask_flags = MTD_WRITEABLE /* force read-only */
- },{
+ }, {
.name = "Backup",
.offset = 0x00040000,
.size = 0x00040000,
- },{
+ }, {
.name = "Image",
.offset = 0x00080000,
.size = 0x01080000,
- },{
+ }, {
.name = "IPSM",
.offset = 0x01100000,
.size = 0x00e00000,
- },{
+ }, {
.name = "Registry",
.offset = 0x01f00000,
.size = MTDPART_SIZ_FULL,
@@ -105,9 +211,9 @@ static struct platform_device flash_device = {
.num_resources = 1,
};
-/********************************************************************************************
+/****************************************************************************
* DAVICOM DM9000 Ethernet
- ********************************************************************************************/
+ ****************************************************************************/
static struct resource dm9000_resources[] = {
[0] = {
.start = TRIZEPS4_ETH_PHYS+0x300,
@@ -122,67 +228,68 @@ static struct resource dm9000_resources[] = {
[2] = {
.start = TRIZEPS4_ETH_IRQ,
.end = TRIZEPS4_ETH_IRQ,
- .flags = (IORESOURCE_IRQ | IRQ_TYPE_EDGE_RISING),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
+static struct dm9000_plat_data tri_dm9000_platdata = {
+ .flags = DM9000_PLATF_32BITONLY,
+};
+
static struct platform_device dm9000_device = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(dm9000_resources),
.resource = dm9000_resources,
+ .dev = {
+ .platform_data = &tri_dm9000_platdata,
+ }
};
-/********************************************************************************************
- * PXA270 serial ports
- ********************************************************************************************/
-static struct plat_serial8250_port tri_serial_ports[] = {
-#ifdef CONFIG_SERIAL_PXA
- /* this uses the own PXA driver */
+/****************************************************************************
+ * LED's on GPIO pins of PXA
+ ****************************************************************************/
+static struct gpio_led trizeps4_led[] = {
+#ifdef STATUS_LEDS_ON_STUART_PINS
{
- 0,
- },
-#else
- /* this uses the generic 8520 driver */
- [0] = {
- .membase = (void *)&FFUART,
- .irq = IRQ_FFUART,
- .flags = UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM32,
- .regshift = 2,
- .uartclk = (921600*16),
- },
- [1] = {
- .membase = (void *)&BTUART,
- .irq = IRQ_BTUART,
- .flags = UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM32,
- .regshift = 2,
- .uartclk = (921600*16),
+ .name = "led0:orange:heartbeat", /* */
+ .default_trigger = "heartbeat",
+ .gpio = GPIO_HEARTBEAT_LED,
+ .active_low = 1,
},
{
- 0,
+ .name = "led1:yellow:cpubusy", /* */
+ .default_trigger = "cpu-busy",
+ .gpio = GPIO_SYS_BUSY_LED,
+ .active_low = 1,
},
#endif
};
-static struct platform_device uart_devices = {
- .name = "serial8250",
- .id = 0,
+static struct gpio_led_platform_data trizeps4_led_data = {
+ .leds = trizeps4_led,
+ .num_leds = ARRAY_SIZE(trizeps4_led),
+};
+
+static struct platform_device leds_devices = {
+ .name = "leds-gpio",
+ .id = -1,
.dev = {
- .platform_data = tri_serial_ports,
+ .platform_data = &trizeps4_led_data,
},
- .num_resources = 0,
- .resource = NULL,
};
-static struct platform_device * trizeps4_devices[] __initdata = {
+static struct platform_device *trizeps4_devices[] __initdata = {
&flash_device,
- &uart_devices,
&dm9000_device,
+ &leds_devices,
+};
+
+static struct platform_device *trizeps4wl_devices[] __initdata = {
+ &flash_device,
+ &leds_devices,
};
-#ifdef CONFIG_MACH_TRIZEPS4_CONXS
static short trizeps_conxs_bcr;
/* PCCARD power switching supports only 3,3V */
@@ -192,108 +299,63 @@ void board_pcmcia_power(int power)
/* switch power on, put in reset and enable buffers */
trizeps_conxs_bcr |= power;
trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
- trizeps_conxs_bcr &= ~(ConXS_BCR_CF_BUF_EN);
- ConXS_BCR = trizeps_conxs_bcr;
+ trizeps_conxs_bcr &= ~ConXS_BCR_CF_BUF_EN;
+ BCR_writew(trizeps_conxs_bcr);
/* wait a little */
udelay(2000);
/* take reset away */
- trizeps_conxs_bcr &= ~(ConXS_BCR_CF_RESET);
- ConXS_BCR = trizeps_conxs_bcr;
+ trizeps_conxs_bcr &= ~ConXS_BCR_CF_RESET;
+ BCR_writew(trizeps_conxs_bcr);
udelay(2000);
} else {
/* put in reset */
trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
- ConXS_BCR = trizeps_conxs_bcr;
+ BCR_writew(trizeps_conxs_bcr);
udelay(1000);
/* switch power off */
- trizeps_conxs_bcr &= ~(0xf);
- ConXS_BCR = trizeps_conxs_bcr;
-
+ trizeps_conxs_bcr &= ~0xf;
+ BCR_writew(trizeps_conxs_bcr);
}
- pr_debug("%s: o%s 0x%x\n", __func__, power ? "n": "ff", trizeps_conxs_bcr);
+ pr_debug("%s: o%s 0x%x\n", __func__, power ? "n" : "ff",
+ trizeps_conxs_bcr);
}
+EXPORT_SYMBOL(board_pcmcia_power);
/* backlight power switching for LCD panel */
static void board_backlight_power(int on)
{
- if (on) {
+ if (on)
trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
- } else {
+ else
trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
- }
- pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff", trizeps_conxs_bcr);
- ConXS_BCR = trizeps_conxs_bcr;
-}
-/* Powersupply for MMC/SD cardslot */
-static void board_mci_power(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data* p_d = dev->platform_data;
-
- if (( 1 << vdd) & p_d->ocr_mask) {
- pr_debug("%s: on\n", __func__);
- /* FIXME fill in values here */
- } else {
- pr_debug("%s: off\n", __func__);
- /* FIXME fill in values here */
- }
-}
-
-static short trizeps_conxs_ircr;
-
-/* Switch modes and Power for IRDA receiver */
-static void board_irda_mode(struct device *dev, int mode)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- if (mode & IR_SIRMODE) {
- /* Slow mode */
- trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;
- } else if (mode & IR_FIRMODE) {
- /* Fast mode */
- trizeps_conxs_ircr |= ConXS_IRCR_MODE;
- }
- pxa2xx_transceiver_mode(dev, mode);
- if (mode & IR_OFF) {
- trizeps_conxs_ircr |= ConXS_IRCR_SD;
- } else {
- trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
- }
- /* FIXME write values to register */
- local_irq_restore(flags);
+ pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff",
+ trizeps_conxs_bcr);
+ BCR_writew(trizeps_conxs_bcr);
}
-#else
-/* for other baseboards define dummies */
-void board_pcmcia_power(int power) {;}
-#define board_backlight_power NULL
-#define board_mci_power NULL
-#define board_irda_mode NULL
-
-#endif /* CONFIG_MACH_TRIZEPS4_CONXS */
-EXPORT_SYMBOL(board_pcmcia_power);
+/* a I2C based RTC is known on CONXS board */
+static struct i2c_board_info trizeps4_i2c_devices[] __initdata = {
+ { I2C_BOARD_INFO("rtc-pcf8593", 0x51) }
+};
-static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int, void *data)
+/****************************************************************************
+ * MMC card slot external to module
+ ****************************************************************************/
+static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int,
+ void *data)
{
int err;
- /* setup GPIO for PXA27x MMC controller */
- pxa_gpio_mode(GPIO32_MMCCLK_MD);
- pxa_gpio_mode(GPIO112_MMCCMD_MD);
- pxa_gpio_mode(GPIO92_MMCDAT0_MD);
- pxa_gpio_mode(GPIO109_MMCDAT1_MD);
- pxa_gpio_mode(GPIO110_MMCDAT2_MD);
- pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
- pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_RISING,
- "MMC card detect", data);
- if (err)
- printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-
- return err;
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_SAMPLE_RANDOM,
+ "MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request"
+ "MMC card detect IRQ\n");
+ return -1;
+ }
+ return 0;
}
static void trizeps4_mci_exit(struct device *dev, void *data)
@@ -303,39 +365,69 @@ static void trizeps4_mci_exit(struct device *dev, void *data)
static struct pxamci_platform_data trizeps4_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .detect_delay = 1,
.init = trizeps4_mci_init,
.exit = trizeps4_mci_exit,
- .setpower = board_mci_power,
+ .get_ro = NULL, /* write-protection not supported */
+ .setpower = NULL, /* power-switching not supported */
};
-static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
- .transceiver_mode = board_irda_mode,
-};
+/****************************************************************************
+ * IRDA mode switching on stuart
+ ****************************************************************************/
+#ifndef STATUS_LEDS_ON_STUART_PINS
+static short trizeps_conxs_ircr;
-static int trizeps4_ohci_init(struct device *dev)
+static int trizeps4_irda_startup(struct device *dev)
{
- /* setup Port1 GPIO pin. */
- pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */
- pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */
-
- /* Set the Power Control Polarity Low and Power Sense
- Polarity Low to active low. */
- UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
- ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-
+ trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
+ IRCR_writew(trizeps_conxs_ircr);
return 0;
}
-static void trizeps4_ohci_exit(struct device *dev)
+static void trizeps4_irda_shutdown(struct device *dev)
+{
+ trizeps_conxs_ircr |= ConXS_IRCR_SD;
+ IRCR_writew(trizeps_conxs_ircr);
+}
+
+static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
{
- ;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ /* Switch mode */
+ if (mode & IR_SIRMODE)
+ trizeps_conxs_ircr &= ~ConXS_IRCR_MODE; /* Slow mode */
+ else if (mode & IR_FIRMODE) {
+ trizeps_conxs_ircr |= ConXS_IRCR_MODE; /* Fast mode */
+
+ /* Switch power */
+ if (mode & IR_OFF)
+ trizeps_conxs_ircr |= ConXS_IRCR_SD;
+ else
+ trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
+
+ IRCR_writew(trizeps_conxs_ircr);
+ local_irq_restore(flags);
+
+ pxa2xx_transceiver_mode(dev, mode);
}
+static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = trizeps4_irda_transceiver_mode,
+ .startup = trizeps4_irda_startup,
+ .shutdown = trizeps4_irda_shutdown,
+};
+#endif
+
+/****************************************************************************
+ * OHCI USB port
+ ****************************************************************************/
static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
- .init = trizeps4_ohci_init,
- .exit = trizeps4_ohci_exit,
+ .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
};
static struct map_desc trizeps4_io_desc[] __initdata = {
@@ -372,105 +464,80 @@ static struct map_desc trizeps4_io_desc[] __initdata = {
};
static struct pxafb_mode_info sharp_lcd_mode = {
- .pixclock = 78000,
- .xres = 640,
- .yres = 480,
- .bpp = 8,
- .hsync_len = 4,
- .left_margin = 4,
- .right_margin = 4,
- .vsync_len = 2,
- .upper_margin = 0,
- .lower_margin = 0,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .cmap_greyscale = 0,
+ .pixclock = 78000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 8,
+ .hsync_len = 4,
+ .left_margin = 4,
+ .right_margin = 4,
+ .vsync_len = 2,
+ .upper_margin = 0,
+ .lower_margin = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .cmap_greyscale = 0,
};
static struct pxafb_mach_info sharp_lcd = {
- .modes = &sharp_lcd_mode,
- .num_modes = 1,
- .cmap_inverse = 0,
- .cmap_static = 0,
- .lccr0 = LCCR0_Color | LCCR0_Pas | LCCR0_Dual,
- .lccr3 = 0x0340ff02,
- .pxafb_backlight_power = board_backlight_power,
+ .modes = &sharp_lcd_mode,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL,
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+ .pxafb_backlight_power = board_backlight_power,
};
static struct pxafb_mode_info toshiba_lcd_mode = {
- .pixclock = 39720,
- .xres = 640,
- .yres = 480,
- .bpp = 8,
- .hsync_len = 63,
- .left_margin = 12,
- .right_margin = 12,
- .vsync_len = 4,
- .upper_margin = 32,
- .lower_margin = 10,
- .sync = 0,
- .cmap_greyscale = 0,
+ .pixclock = 39720,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 8,
+ .hsync_len = 63,
+ .left_margin = 12,
+ .right_margin = 12,
+ .vsync_len = 4,
+ .upper_margin = 32,
+ .lower_margin = 10,
+ .sync = 0,
+ .cmap_greyscale = 0,
};
static struct pxafb_mach_info toshiba_lcd = {
- .modes = &toshiba_lcd_mode,
- .num_modes = 1,
- .cmap_inverse = 0,
- .cmap_static = 0,
- .lccr0 = LCCR0_Color | LCCR0_Act,
- .lccr3 = 0x03400002,
- .pxafb_backlight_power = board_backlight_power,
+ .modes = &toshiba_lcd_mode,
+ .num_modes = 1,
+ .lcd_conn = (LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL),
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+ .pxafb_backlight_power = board_backlight_power,
};
static void __init trizeps4_init(void)
{
- platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices));
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4_pin_config));
+ if (machine_is_trizeps4wl()) {
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4wl_pin_config));
+ platform_add_devices(trizeps4wl_devices,
+ ARRAY_SIZE(trizeps4wl_devices));
+ } else {
+ platform_add_devices(trizeps4_devices,
+ ARRAY_SIZE(trizeps4_devices));
+ }
-/* set_pxa_fb_info(&sharp_lcd); */
- set_pxa_fb_info(&toshiba_lcd);
+ if (0) /* dont know how to determine LCD */
+ set_pxa_fb_info(&sharp_lcd);
+ else
+ set_pxa_fb_info(&toshiba_lcd);
pxa_set_mci_info(&trizeps4_mci_platform_data);
+#ifndef STATUS_LEDS_ON_STUART_PINS
pxa_set_ficp_info(&trizeps4_ficp_platform_data);
+#endif
pxa_set_ohci_info(&trizeps4_ohci_platform_data);
pxa_set_ac97_info(NULL);
-}
-
-static void __init trizeps4_map_io(void)
-{
- pxa_map_io();
- iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
-
- /* for DiskOnChip */
- pxa_gpio_mode(GPIO15_nCS_1_MD);
-
- /* for off-module PIC on ConXS board */
- pxa_gpio_mode(GPIO_PIC | GPIO_IN);
-
- /* UCB1400 irq */
- pxa_gpio_mode(GPIO_UCB1400 | GPIO_IN);
-
- /* for DM9000 LAN */
- pxa_gpio_mode(GPIO78_nCS_2_MD);
- pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
-
- /* for PCMCIA device */
- pxa_gpio_mode(GPIO_PCD | GPIO_IN);
- pxa_gpio_mode(GPIO_PRDY | GPIO_IN);
-
- /* for I2C adapter */
- pxa_gpio_mode(GPIO117_I2CSCL_MD);
- pxa_gpio_mode(GPIO118_I2CSDA_MD);
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, trizeps4_i2c_devices,
+ ARRAY_SIZE(trizeps4_i2c_devices));
- /* MMC_DET s.o. */
- pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
-
- /* whats that for ??? */
- pxa_gpio_mode(GPIO79_nCS_3_MD);
-
-#ifdef CONFIG_LEDS
- pxa_gpio_mode( GPIO_SYS_BUSY_LED | GPIO_OUT); /* LED1 */
- pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT); /* LED2 */
-#endif
-#ifdef CONFIG_MACH_TRIZEPS4_CONXS
#ifdef CONFIG_IDE_PXA_CF
/* if boot direct from compact flash dont disable power */
trizeps_conxs_bcr = 0x0009;
@@ -478,18 +545,24 @@ static void __init trizeps4_map_io(void)
/* this is the reset value */
trizeps_conxs_bcr = 0x00A0;
#endif
- ConXS_BCR = trizeps_conxs_bcr;
-#endif
+ BCR_writew(trizeps_conxs_bcr);
+ board_backlight_power(1);
+}
+
+static void __init trizeps4_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
-#warning FIXME - accessing PM registers directly is deprecated
- PWER = 0x00000002;
- PFER = 0x00000000;
- PRER = 0x00000002;
- PGSR0 = 0x0158C000;
- PGSR1 = 0x00FF0080;
- PGSR2 = 0x0001C004;
- /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
- PCFR |= PCFR_OPDE;
+ if ((MSC0 & 0x8) && (BOOT_DEF & 0x1)) {
+ /* if flash is 16 bit wide its a Trizeps4 WL */
+ __machine_arch_type = MACH_TYPE_TRIZEPS4WL;
+ trizeps4_flash_data[0].width = 2;
+ } else {
+ /* if flash is 32 bit wide its a Trizeps4 */
+ __machine_arch_type = MACH_TYPE_TRIZEPS4;
+ trizeps4_flash_data[0].width = 4;
+ }
}
MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
@@ -503,3 +576,13 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
.timer = &pxa_timer,
MACHINE_END
+MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
+ /* MAINTAINER("Jürgen Schindele") */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = TRIZEPS4_SDRAM_BASE + 0x100,
+ .init_machine = trizeps4_init,
+ .map_io = trizeps4_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
new file mode 100644
index 000000000000..d7632f63603c
--- /dev/null
+++ b/arch/arm/mach-pxa/viper.c
@@ -0,0 +1,951 @@
+/*
+ * linux/arch/arm/mach-pxa/viper.c
+ *
+ * Support for the Arcom VIPER SBC.
+ *
+ * Author: Ian Campbell
+ * Created: Feb 03, 2003
+ * Copyright: Arcom Control Systems
+ *
+ * Maintained by Marc Zyngier <maz@misterjones.org>
+ * <marc.zyngier@altran.com>
+ *
+ * Based on lubbock.c:
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/memory.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/major.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/sched.h>
+#include <linux/gpio.h>
+#include <linux/i2c-gpio.h>
+#include <linux/serial_8250.h>
+#include <linux/smc91x.h>
+#include <linux/pwm_backlight.h>
+#include <linux/usb/isp116x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/bitfield.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/i2c.h>
+#include <mach/viper.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned int icr;
+
+static void viper_icr_set_bit(unsigned int bit)
+{
+ icr |= bit;
+ VIPER_ICR = icr;
+}
+
+static void viper_icr_clear_bit(unsigned int bit)
+{
+ icr &= ~bit;
+ VIPER_ICR = icr;
+}
+
+/* This function is used from the pcmcia module to reset the CF */
+void viper_cf_rst(int state)
+{
+ if (state)
+ viper_icr_set_bit(VIPER_ICR_CF_RST);
+ else
+ viper_icr_clear_bit(VIPER_ICR_CF_RST);
+}
+EXPORT_SYMBOL(viper_cf_rst);
+
+/*
+ * The CPLD version register was not present on VIPER boards prior to
+ * v2i1. On v1 boards where the version register is not present we
+ * will just read back the previous value from the databus.
+ *
+ * Therefore we do two reads. The first time we write 0 to the
+ * (read-only) register before reading and the second time we write
+ * 0xff first. If the two reads do not match or they read back as 0xff
+ * or 0x00 then we have version 1 hardware.
+ */
+static u8 viper_hw_version(void)
+{
+ u8 v1, v2;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ VIPER_VERSION = 0;
+ v1 = VIPER_VERSION;
+ VIPER_VERSION = 0xff;
+ v2 = VIPER_VERSION;
+
+ v1 = (v1 != v2 || v1 == 0xff) ? 0 : v1;
+
+ local_irq_restore(flags);
+ return v1;
+}
+
+/* CPU sysdev */
+static int viper_cpu_suspend(struct sys_device *sysdev, pm_message_t state)
+{
+ viper_icr_set_bit(VIPER_ICR_R_DIS);
+ return 0;
+}
+
+static int viper_cpu_resume(struct sys_device *sysdev)
+{
+ viper_icr_clear_bit(VIPER_ICR_R_DIS);
+ return 0;
+}
+
+static struct sysdev_driver viper_cpu_sysdev_driver = {
+ .suspend = viper_cpu_suspend,
+ .resume = viper_cpu_resume,
+};
+
+static unsigned int current_voltage_divisor;
+
+/*
+ * If force is not true then step from existing to new divisor. If
+ * force is true then jump straight to the new divisor. Stepping is
+ * used because if the jump in voltage is too large, the VCC can dip
+ * too low and the regulator cuts out.
+ *
+ * force can be used to initialize the divisor to a know state by
+ * setting the value for the current clock speed, since we are already
+ * running at that speed we know the voltage should be pretty close so
+ * the jump won't be too large
+ */
+static void viper_set_core_cpu_voltage(unsigned long khz, int force)
+{
+ int i = 0;
+ unsigned int divisor = 0;
+ const char *v;
+
+ if (khz < 200000) {
+ v = "1.0"; divisor = 0xfff;
+ } else if (khz < 300000) {
+ v = "1.1"; divisor = 0xde5;
+ } else {
+ v = "1.3"; divisor = 0x325;
+ }
+
+ pr_debug("viper: setting CPU core voltage to %sV at %d.%03dMHz\n",
+ v, (int)khz / 1000, (int)khz % 1000);
+
+#define STEP 0x100
+ do {
+ int step;
+
+ if (force)
+ step = divisor;
+ else if (current_voltage_divisor < divisor - STEP)
+ step = current_voltage_divisor + STEP;
+ else if (current_voltage_divisor > divisor + STEP)
+ step = current_voltage_divisor - STEP;
+ else
+ step = divisor;
+ force = 0;
+
+ gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
+ gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
+
+ for (i = 1 << 11 ; i > 0 ; i >>= 1) {
+ udelay(1);
+
+ gpio_set_value(VIPER_PSU_DATA_GPIO, step & i);
+ udelay(1);
+
+ gpio_set_value(VIPER_PSU_CLK_GPIO, 1);
+ udelay(1);
+
+ gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
+ }
+ udelay(1);
+
+ gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 1);
+ udelay(1);
+
+ gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
+
+ current_voltage_divisor = step;
+ } while (current_voltage_divisor != divisor);
+}
+
+/* Interrupt handling */
+static unsigned long viper_irq_enabled_mask;
+
+static void viper_ack_irq(unsigned int irq)
+{
+ int viper_irq = irq - PXA_ISA_IRQ(0);
+
+ if (viper_irq < 8)
+ VIPER_LO_IRQ_STATUS = 1 << viper_irq;
+ else
+ VIPER_HI_IRQ_STATUS = 1 << (viper_irq - 8);
+}
+
+static void viper_mask_irq(unsigned int irq)
+{
+ viper_irq_enabled_mask &= ~(1 << (irq - PXA_ISA_IRQ(0)));
+}
+
+static void viper_unmask_irq(unsigned int irq)
+{
+ viper_irq_enabled_mask |= (1 << (irq - PXA_ISA_IRQ(0)));
+}
+
+static inline unsigned long viper_irq_pending(void)
+{
+ return (VIPER_HI_IRQ_STATUS << 8 | VIPER_LO_IRQ_STATUS) &
+ viper_irq_enabled_mask;
+}
+
+static void viper_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned long pending;
+
+ pending = viper_irq_pending();
+ do {
+ if (likely(pending)) {
+ irq = PXA_ISA_IRQ(0) + __ffs(pending);
+ generic_handle_irq(irq);
+ }
+ pending = viper_irq_pending();
+ } while (pending);
+}
+
+static struct irq_chip viper_irq_chip = {
+ .name = "ISA",
+ .ack = viper_ack_irq,
+ .mask = viper_mask_irq,
+ .unmask = viper_unmask_irq
+};
+
+static void __init viper_init_irq(void)
+{
+ const int isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, 9, 14, 15 };
+ int irq;
+ int isa_irq;
+
+ pxa25x_init_irq();
+
+ /* setup ISA IRQs */
+ for (irq = 0; irq < ARRAY_SIZE(isa_irqs); irq++) {
+ isa_irq = isa_irqs[irq];
+ set_irq_chip(isa_irq, &viper_irq_chip);
+ set_irq_handler(isa_irq, handle_edge_irq);
+ set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
+ }
+
+ set_irq_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
+ viper_irq_handler);
+ set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
+
+#ifndef CONFIG_SERIAL_PXA
+ /*
+ * 8250 doesn't support IRQ_TYPE being passed as part
+ * of the plat_serial8250_port structure...
+ */
+ set_irq_type(gpio_to_irq(VIPER_UARTA_GPIO), IRQ_TYPE_EDGE_RISING);
+ set_irq_type(gpio_to_irq(VIPER_UARTB_GPIO), IRQ_TYPE_EDGE_RISING);
+#endif
+}
+
+/* Flat Panel */
+static struct pxafb_mode_info fb_mode_info[] = {
+ {
+ .pixclock = 157500,
+
+ .xres = 320,
+ .yres = 240,
+
+ .bpp = 16,
+
+ .hsync_len = 63,
+ .left_margin = 7,
+ .right_margin = 13,
+
+ .vsync_len = 20,
+ .upper_margin = 0,
+ .lower_margin = 0,
+
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info fb_info = {
+ .modes = fb_mode_info,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static int viper_backlight_init(struct device *dev)
+{
+ int ret;
+
+ /* GPIO9 and 10 control FB backlight. Initialise to off */
+ ret = gpio_request(VIPER_BCKLIGHT_EN_GPIO, "Backlight");
+ if (ret)
+ goto err_request_bckl;
+
+ ret = gpio_request(VIPER_LCD_EN_GPIO, "LCD");
+ if (ret)
+ goto err_request_lcd;
+
+ ret = gpio_direction_output(VIPER_BCKLIGHT_EN_GPIO, 0);
+ if (ret)
+ goto err_dir;
+
+ ret = gpio_direction_output(VIPER_LCD_EN_GPIO, 0);
+ if (ret)
+ goto err_dir;
+
+ return 0;
+
+err_dir:
+ gpio_free(VIPER_LCD_EN_GPIO);
+err_request_lcd:
+ gpio_free(VIPER_BCKLIGHT_EN_GPIO);
+err_request_bckl:
+ dev_err(dev, "Failed to setup LCD GPIOs\n");
+
+ return ret;
+}
+
+static int viper_backlight_notify(int brightness)
+{
+ gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness);
+ gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness);
+
+ return brightness;
+}
+
+static void viper_backlight_exit(struct device *dev)
+{
+ gpio_free(VIPER_LCD_EN_GPIO);
+ gpio_free(VIPER_BCKLIGHT_EN_GPIO);
+}
+
+static struct platform_pwm_backlight_data viper_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ .pwm_period_ns = 1000000,
+ .init = viper_backlight_init,
+ .notify = viper_backlight_notify,
+ .exit = viper_backlight_exit,
+};
+
+static struct platform_device viper_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa25x_device_pwm0.dev,
+ .platform_data = &viper_backlight_data,
+ },
+};
+
+/* Ethernet */
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .name = "smc91x-regs",
+ .start = VIPER_ETH_PHYS + 0x300,
+ .end = VIPER_ETH_PHYS + 0x30f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gpio_to_irq(VIPER_ETH_GPIO),
+ .end = gpio_to_irq(VIPER_ETH_GPIO),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+ [2] = {
+ .name = "smc91x-data32",
+ .start = VIPER_ETH_DATA_PHYS,
+ .end = VIPER_ETH_DATA_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct smc91x_platdata viper_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &viper_smc91x_info,
+ },
+};
+
+/* i2c */
+static struct i2c_gpio_platform_data i2c_bus_data = {
+ .sda_pin = VIPER_RTC_I2C_SDA_GPIO,
+ .scl_pin = VIPER_RTC_I2C_SCL_GPIO,
+ .udelay = 10,
+ .timeout = 100,
+};
+
+static struct platform_device i2c_bus_device = {
+ .name = "i2c-gpio",
+ .id = 1, /* pxa2xx-i2c is bus 0, so start at 1 */
+ .dev = {
+ .platform_data = &i2c_bus_data,
+ }
+};
+
+static struct i2c_board_info __initdata viper_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("ds1338", 0x68),
+ },
+};
+
+/*
+ * Serial configuration:
+ * You can either have the standard PXA ports driven by the PXA driver,
+ * or all the ports (PXA + 16850) driven by the 8250 driver.
+ * Choose your poison.
+ */
+
+static struct resource viper_serial_resources[] = {
+#ifndef CONFIG_SERIAL_PXA
+ {
+ .start = 0x40100000,
+ .end = 0x4010001f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x40200000,
+ .end = 0x4020001f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x40700000,
+ .end = 0x4070001f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = VIPER_UARTA_PHYS,
+ .end = VIPER_UARTA_PHYS + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = VIPER_UARTB_PHYS,
+ .end = VIPER_UARTB_PHYS + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+#else
+ {
+ 0,
+ },
+#endif
+};
+
+static struct plat_serial8250_port serial_platform_data[] = {
+#ifndef CONFIG_SERIAL_PXA
+ /* Internal UARTs */
+ {
+ .membase = (void *)&FFUART,
+ .mapbase = __PREG(FFUART),
+ .irq = IRQ_FFUART,
+ .uartclk = 921600 * 16,
+ .regshift = 2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ {
+ .membase = (void *)&BTUART,
+ .mapbase = __PREG(BTUART),
+ .irq = IRQ_BTUART,
+ .uartclk = 921600 * 16,
+ .regshift = 2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ {
+ .membase = (void *)&STUART,
+ .mapbase = __PREG(STUART),
+ .irq = IRQ_STUART,
+ .uartclk = 921600 * 16,
+ .regshift = 2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ /* External UARTs */
+ {
+ .mapbase = VIPER_UARTA_PHYS,
+ .irq = gpio_to_irq(VIPER_UARTA_GPIO),
+ .uartclk = 1843200,
+ .regshift = 1,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP |
+ UPF_SKIP_TEST,
+ },
+ {
+ .mapbase = VIPER_UARTB_PHYS,
+ .irq = gpio_to_irq(VIPER_UARTB_GPIO),
+ .uartclk = 1843200,
+ .regshift = 1,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP |
+ UPF_SKIP_TEST,
+ },
+#endif
+ { },
+};
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+ .num_resources = ARRAY_SIZE(viper_serial_resources),
+ .resource = viper_serial_resources,
+};
+
+/* USB */
+static void isp116x_delay(struct device *dev, int delay)
+{
+ ndelay(delay);
+}
+
+static struct resource isp116x_resources[] = {
+ [0] = { /* DATA */
+ .start = VIPER_USB_PHYS + 0,
+ .end = VIPER_USB_PHYS + 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* ADDR */
+ .start = VIPER_USB_PHYS + 2,
+ .end = VIPER_USB_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = gpio_to_irq(VIPER_USB_GPIO),
+ .end = gpio_to_irq(VIPER_USB_GPIO),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+};
+
+/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
+static struct isp116x_platform_data isp116x_platform_data = {
+ /* Enable internal resistors on downstream ports */
+ .sel15Kres = 1,
+ /* On-chip overcurrent protection */
+ .oc_enable = 1,
+ /* INT output polarity */
+ .int_act_high = 1,
+ /* INT edge or level triggered */
+ .int_edge_triggered = 0,
+
+ /* WAKEUP pin connected - NOT SUPPORTED */
+ /* .remote_wakeup_connected = 0, */
+ /* Wakeup by devices on usb bus enabled */
+ .remote_wakeup_enable = 0,
+ .delay = isp116x_delay,
+};
+
+static struct platform_device isp116x_device = {
+ .name = "isp116x-hcd",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(isp116x_resources),
+ .resource = isp116x_resources,
+ .dev = {
+ .platform_data = &isp116x_platform_data,
+ },
+
+};
+
+/* MTD */
+static struct resource mtd_resources[] = {
+ [0] = { /* RedBoot config + filesystem flash */
+ .start = VIPER_FLASH_PHYS,
+ .end = VIPER_FLASH_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* Boot flash */
+ .start = VIPER_BOOT_PHYS,
+ .end = VIPER_BOOT_PHYS + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = { /*
+ * SRAM size is actually 256KB, 8bits, with a sparse mapping
+ * (each byte is on a 16bit boundary).
+ */
+ .start = _VIPER_SRAM_BASE,
+ .end = _VIPER_SRAM_BASE + SZ_512K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mtd_partition viper_boot_flash_partition = {
+ .name = "RedBoot",
+ .size = SZ_1M,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE, /* force R/O */
+};
+
+static struct physmap_flash_data viper_flash_data[] = {
+ [0] = {
+ .width = 2,
+ .parts = NULL,
+ .nr_parts = 0,
+ },
+ [1] = {
+ .width = 2,
+ .parts = &viper_boot_flash_partition,
+ .nr_parts = 1,
+ },
+};
+
+static struct platform_device viper_mtd_devices[] = {
+ [0] = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &viper_flash_data[0],
+ },
+ .resource = &mtd_resources[0],
+ .num_resources = 1,
+ },
+ [1] = {
+ .name = "physmap-flash",
+ .id = 1,
+ .dev = {
+ .platform_data = &viper_flash_data[1],
+ },
+ .resource = &mtd_resources[1],
+ .num_resources = 1,
+ },
+};
+
+static struct platform_device *viper_devs[] __initdata = {
+ &smc91x_device,
+ &i2c_bus_device,
+ &serial_device,
+ &isp116x_device,
+ &viper_mtd_devices[0],
+ &viper_mtd_devices[1],
+ &viper_backlight_device,
+};
+
+static mfp_cfg_t viper_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO79_nCS_3,
+ GPIO80_nCS_4,
+ GPIO33_nCS_5,
+
+ /* FP Backlight */
+ GPIO9_GPIO, /* VIPER_BCKLIGHT_EN_GPIO */
+ GPIO10_GPIO, /* VIPER_LCD_EN_GPIO */
+ GPIO16_PWM0_OUT,
+
+ /* Ethernet PHY Ready */
+ GPIO18_RDY,
+
+ /* Serial shutdown */
+ GPIO12_GPIO | MFP_LPM_DRIVE_HIGH, /* VIPER_UART_SHDN_GPIO */
+
+ /* Compact-Flash / PC104 */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO8_GPIO, /* VIPER_CF_RDY_GPIO */
+ GPIO32_GPIO, /* VIPER_CF_CD_GPIO */
+ GPIO82_GPIO, /* VIPER_CF_POWER_GPIO */
+
+ /* Integrated UPS control */
+ GPIO20_GPIO, /* VIPER_UPS_GPIO */
+
+ /* Vcc regulator control */
+ GPIO6_GPIO, /* VIPER_PSU_DATA_GPIO */
+ GPIO11_GPIO, /* VIPER_PSU_CLK_GPIO */
+ GPIO19_GPIO, /* VIPER_PSU_nCS_LD_GPIO */
+
+ /* i2c busses */
+ GPIO26_GPIO, /* VIPER_TPM_I2C_SDA_GPIO */
+ GPIO27_GPIO, /* VIPER_TPM_I2C_SCL_GPIO */
+ GPIO83_GPIO, /* VIPER_RTC_I2C_SDA_GPIO */
+ GPIO84_GPIO, /* VIPER_RTC_I2C_SCL_GPIO */
+
+ /* PC/104 Interrupt */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* VIPER_CPLD_GPIO */
+};
+
+static unsigned long viper_tpm;
+
+static int __init viper_tpm_setup(char *str)
+{
+ strict_strtoul(str, 10, &viper_tpm);
+ return 1;
+}
+
+__setup("tpm=", viper_tpm_setup);
+
+static void __init viper_tpm_init(void)
+{
+ struct platform_device *tpm_device;
+ struct i2c_gpio_platform_data i2c_tpm_data = {
+ .sda_pin = VIPER_TPM_I2C_SDA_GPIO,
+ .scl_pin = VIPER_TPM_I2C_SCL_GPIO,
+ .udelay = 10,
+ .timeout = 100,
+ };
+ char *errstr;
+
+ /* Allocate TPM i2c bus if requested */
+ if (!viper_tpm)
+ return;
+
+ tpm_device = platform_device_alloc("i2c-gpio", 2);
+ if (tpm_device) {
+ if (!platform_device_add_data(tpm_device,
+ &i2c_tpm_data,
+ sizeof(i2c_tpm_data))) {
+ if (platform_device_add(tpm_device)) {
+ errstr = "register TPM i2c bus";
+ goto error_free_tpm;
+ }
+ } else {
+ errstr = "allocate TPM i2c bus data";
+ goto error_free_tpm;
+ }
+ } else {
+ errstr = "allocate TPM i2c device";
+ goto error_tpm;
+ }
+
+ return;
+
+error_free_tpm:
+ kfree(tpm_device);
+error_tpm:
+ pr_err("viper: Couldn't %s, giving up\n", errstr);
+}
+
+static void __init viper_init_vcore_gpios(void)
+{
+ if (gpio_request(VIPER_PSU_DATA_GPIO, "PSU data"))
+ goto err_request_data;
+
+ if (gpio_request(VIPER_PSU_CLK_GPIO, "PSU clock"))
+ goto err_request_clk;
+
+ if (gpio_request(VIPER_PSU_nCS_LD_GPIO, "PSU cs"))
+ goto err_request_cs;
+
+ if (gpio_direction_output(VIPER_PSU_DATA_GPIO, 0) ||
+ gpio_direction_output(VIPER_PSU_CLK_GPIO, 0) ||
+ gpio_direction_output(VIPER_PSU_nCS_LD_GPIO, 0))
+ goto err_dir;
+
+ /* c/should assume redboot set the correct level ??? */
+ viper_set_core_cpu_voltage(get_clk_frequency_khz(0), 1);
+
+ return;
+
+err_dir:
+ gpio_free(VIPER_PSU_nCS_LD_GPIO);
+err_request_cs:
+ gpio_free(VIPER_PSU_CLK_GPIO);
+err_request_clk:
+ gpio_free(VIPER_PSU_DATA_GPIO);
+err_request_data:
+ pr_err("viper: Failed to setup vcore control GPIOs\n");
+}
+
+static void __init viper_init_serial_gpio(void)
+{
+ if (gpio_request(VIPER_UART_SHDN_GPIO, "UARTs shutdown"))
+ goto err_request;
+
+ if (gpio_direction_output(VIPER_UART_SHDN_GPIO, 0))
+ goto err_dir;
+
+ return;
+
+err_dir:
+ gpio_free(VIPER_UART_SHDN_GPIO);
+err_request:
+ pr_err("viper: Failed to setup UART shutdown GPIO\n");
+}
+
+#ifdef CONFIG_CPU_FREQ
+static int viper_cpufreq_notifier(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct cpufreq_freqs *freq = data;
+
+ /* TODO: Adjust timings??? */
+
+ switch (val) {
+ case CPUFREQ_PRECHANGE:
+ if (freq->old < freq->new) {
+ /* we are getting faster so raise the voltage
+ * before we change freq */
+ viper_set_core_cpu_voltage(freq->new, 0);
+ }
+ break;
+ case CPUFREQ_POSTCHANGE:
+ if (freq->old > freq->new) {
+ /* we are slowing down so drop the power
+ * after we change freq */
+ viper_set_core_cpu_voltage(freq->new, 0);
+ }
+ break;
+ case CPUFREQ_RESUMECHANGE:
+ viper_set_core_cpu_voltage(freq->new, 0);
+ break;
+ default:
+ /* ignore */
+ break;
+ }
+
+ return 0;
+}
+
+static struct notifier_block viper_cpufreq_notifier_block = {
+ .notifier_call = viper_cpufreq_notifier
+};
+
+static void __init viper_init_cpufreq(void)
+{
+ if (cpufreq_register_notifier(&viper_cpufreq_notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER))
+ pr_err("viper: Failed to setup cpufreq notifier\n");
+}
+#else
+static inline void viper_init_cpufreq(void) {}
+#endif
+
+static void viper_power_off(void)
+{
+ pr_notice("Shutting off UPS\n");
+ gpio_set_value(VIPER_UPS_GPIO, 1);
+ /* Spin to death... */
+ while (1);
+}
+
+static void __init viper_init(void)
+{
+ u8 version;
+
+ pm_power_off = viper_power_off;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
+
+ /* Wake-up serial console */
+ viper_init_serial_gpio();
+
+ set_pxa_fb_info(&fb_info);
+
+ /* v1 hardware cannot use the datacs line */
+ version = viper_hw_version();
+ if (version == 0)
+ smc91x_device.num_resources--;
+
+ pxa_set_i2c_info(NULL);
+ platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
+
+ viper_init_vcore_gpios();
+ viper_init_cpufreq();
+
+ sysdev_driver_register(&cpu_sysdev_class, &viper_cpu_sysdev_driver);
+
+ if (version) {
+ pr_info("viper: hardware v%di%d detected. "
+ "CPLD revision %d.\n",
+ VIPER_BOARD_VERSION(version),
+ VIPER_BOARD_ISSUE(version),
+ VIPER_CPLD_REVISION(version));
+ system_rev = (VIPER_BOARD_VERSION(version) << 8) |
+ (VIPER_BOARD_ISSUE(version) << 4) |
+ VIPER_CPLD_REVISION(version);
+ } else {
+ pr_info("viper: No version register.\n");
+ }
+
+ i2c_register_board_info(1, ARRAY_AND_SIZE(viper_i2c_devices));
+
+ viper_tpm_init();
+ pxa_set_ac97_info(NULL);
+}
+
+static struct map_desc viper_io_desc[] __initdata = {
+ {
+ .virtual = VIPER_CPLD_BASE,
+ .pfn = __phys_to_pfn(VIPER_CPLD_PHYS),
+ .length = 0x00300000,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = VIPER_PC104IO_BASE,
+ .pfn = __phys_to_pfn(_PCMCIA1IO),
+ .length = 0x00800000,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init viper_map_io(void)
+{
+ pxa_map_io();
+
+ iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
+
+ PCFR |= PCFR_OPDE;
+}
+
+MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
+ /* Maintainer: Marc Zyngier <maz@misterjones.org> */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = viper_map_io,
+ .init_irq = viper_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = viper_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 0cb65b5772fe..813804433466 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -29,6 +29,7 @@
#include <mach/pxafb.h>
#include <mach/zylonite.h>
#include <mach/mmc.h>
+#include <mach/ohci.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxa3xx_nand.h>
@@ -423,6 +424,21 @@ static void __init zylonite_init_nand(void)
static inline void zylonite_init_nand(void) {}
#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data zylonite_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 |
+ POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init zylonite_init_ohci(void)
+{
+ pxa_set_ohci_info(&zylonite_ohci_info);
+}
+#else
+static inline void zylonite_init_ohci(void) {}
+#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
+
static void __init zylonite_init(void)
{
/* board-processor specific initialization */
@@ -443,6 +459,7 @@ static void __init zylonite_init(void)
zylonite_init_keypad();
zylonite_init_nand();
zylonite_init_leds();
+ zylonite_init_ohci();
}
MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 095f5c648236..46538885a58a 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -73,6 +73,12 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
GPIO27_AC97_SDATA_OUT,
GPIO28_AC97_SYNC,
+ /* SSP3 */
+ GPIO91_SSP3_SCLK,
+ GPIO92_SSP3_FRM,
+ GPIO93_SSP3_TXD,
+ GPIO94_SSP3_RXD,
+
/* WM9713 IRQ */
GPIO26_GPIO,
@@ -113,6 +119,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
GPIO13_MMC2_CLK,
GPIO14_MMC2_CMD,
+ /* USB Host */
+ GPIO0_2_USBH_PEN,
+ GPIO1_2_USBH_PWR,
+
/* Standard I2C */
GPIO21_I2C_SCL,
GPIO22_I2C_SDA,
@@ -209,7 +219,7 @@ static struct pca953x_platform_data gpio_exp[] = {
},
};
-struct i2c_board_info zylonite_i2c_board_info[] = {
+static struct i2c_board_info zylonite_i2c_board_info[] = {
{
.type = "pca9539",
.addr = 0x74,
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 9879d7da2df5..0f244744daae 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -69,6 +69,12 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
GPIO39_AC97_BITCLK,
GPIO40_AC97_nACRESET,
+ /* SSP3 */
+ GPIO89_SSP3_SCLK,
+ GPIO90_SSP3_FRM,
+ GPIO91_SSP3_TXD,
+ GPIO92_SSP3_RXD,
+
/* WM9713 IRQ */
GPIO15_GPIO,
@@ -117,6 +123,10 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
GPIO28_MMC2_CLK,
GPIO29_MMC2_CMD,
+ /* USB Host */
+ GPIO2_2_USBH_PEN,
+ GPIO3_2_USBH_PWR,
+
/* Debug LEDs */
GPIO1_2_GPIO | MFP_LPM_DRIVE_HIGH,
GPIO4_2_GPIO | MFP_LPM_DRIVE_HIGH,
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index 604224a2d9a6..75738000272b 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -130,8 +130,7 @@ bast_irq_pc104_demux(unsigned int irq,
for (i = 0; stat != 0; i++, stat >>= 1) {
if (stat & 1) {
irqno = bast_pc104_irqs[i];
- desc = irq_desc + irqno;
- desc_handle_irq(irqno, desc);
+ generic_handle_irq(irqno);
}
}
}
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index 1686950fa557..41720f2c1fea 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -123,10 +123,10 @@ static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc)
subsrc &= ~submsk;
if (subsrc & INTBIT(IRQ_S3C2412_SDI))
- desc_handle_irq(IRQ_S3C2412_SDI, irq_desc + IRQ_S3C2412_SDI);
+ generic_handle_irq(IRQ_S3C2412_SDI);
if (subsrc & INTBIT(IRQ_S3C2412_CF))
- desc_handle_irq(IRQ_S3C2412_CF, irq_desc + IRQ_S3C2412_CF);
+ generic_handle_irq(IRQ_S3C2412_CF);
}
#define INTMSK_CFSDI (1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0))
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index 93fff75220cf..33e3ede0a2b3 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -44,7 +44,6 @@ static void s3c_irq_demux_wdtac97(unsigned int irq,
struct irq_desc *desc)
{
unsigned int subsrc, submsk;
- struct irq_desc *mydesc;
/* read the current pending interrupts, and the mask
* for what it is available */
@@ -58,12 +57,10 @@ static void s3c_irq_demux_wdtac97(unsigned int irq,
if (subsrc != 0) {
if (subsrc & 1) {
- mydesc = irq_desc + IRQ_S3C2440_WDT;
- desc_handle_irq(IRQ_S3C2440_WDT, mydesc);
+ generic_handle_irq(IRQ_S3C2440_WDT);
}
if (subsrc & 2) {
- mydesc = irq_desc + IRQ_S3C2440_AC97;
- desc_handle_irq(IRQ_S3C2440_AC97, mydesc);
+ generic_handle_irq(IRQ_S3C2440_AC97);
}
}
}
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index bd89c8361b3c..e44341d7dfef 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -44,7 +44,6 @@ static inline void s3c2443_irq_demux(unsigned int irq, unsigned int len)
{
unsigned int subsrc, submsk;
unsigned int end;
- struct irq_desc *mydesc;
/* read the current pending interrupts, and the mask
* for what it is available */
@@ -57,13 +56,11 @@ static inline void s3c2443_irq_demux(unsigned int irq, unsigned int len)
subsrc &= (1 << len)-1;
end = len + irq;
- mydesc = irq_desc + irq;
for (; irq < end && subsrc; irq++) {
if (subsrc & 1)
- desc_handle_irq(irq, mydesc);
+ generic_handle_irq(irq);
- mydesc++;
subsrc >>= 1;
}
}
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index 86369a8f0cea..3093d46a9c6f 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -122,14 +122,12 @@ sa1100_high_gpio_handler(unsigned int irq, struct irq_desc *desc)
GEDR = mask;
irq = IRQ_GPIO11;
- desc = irq_desc + irq;
mask >>= 11;
do {
if (mask & 1)
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
mask >>= 1;
irq++;
- desc++;
} while (mask);
mask = GEDR & 0xfffff800;
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 4856a6bd2482..6ccd175bc4cf 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -33,8 +33,6 @@ neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
unsigned int irr;
while (1) {
- struct irq_desc *d;
-
/*
* Acknowledge the parent IRQ.
*/
@@ -67,21 +65,18 @@ neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
desc->chip->ack(irq);
if (irr & IRR_ETHERNET) {
- d = irq_desc + IRQ_NEPONSET_SMC9196;
- desc_handle_irq(IRQ_NEPONSET_SMC9196, d);
+ generic_handle_irq(IRQ_NEPONSET_SMC9196);
}
if (irr & IRR_USAR) {
- d = irq_desc + IRQ_NEPONSET_USAR;
- desc_handle_irq(IRQ_NEPONSET_USAR, d);
+ generic_handle_irq(IRQ_NEPONSET_USAR);
}
desc->chip->unmask(irq);
}
if (irr & IRR_SA1111) {
- d = irq_desc + IRQ_NEPONSET_SA1111;
- desc_handle_irq(IRQ_NEPONSET_SA1111, d);
+ generic_handle_irq(IRQ_NEPONSET_SA1111);
}
}
}
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 534f93282177..824121d52b8d 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -95,8 +95,7 @@ sic_handle_irq(unsigned int irq, struct irq_desc *desc)
irq += IRQ_SIC_START;
- desc = irq_desc + irq;
- desc_handle_irq(irq, desc);
+ generic_handle_irq(irq);
} while (status);
}
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 5764bce98cf3..5935ae4e550b 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1050,13 +1050,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
gpio_irq = bank->virtual_irq_start;
for (; isr != 0; isr >>= 1, gpio_irq++) {
- struct irq_desc *d;
-
if (!(isr & 1))
continue;
- d = irq_desc + gpio_irq;
- desc_handle_irq(gpio_irq, d);
+ generic_handle_irq(gpio_irq);
}
}
/* if bank has any level sensitive GPIO pin interrupt
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index fa70d34eb4a5..590fc5a3ab06 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -468,7 +468,6 @@ static void s3c_irq_demux_adc(unsigned int irq,
{
unsigned int subsrc, submsk;
unsigned int offset = 9;
- struct irq_desc *mydesc;
/* read the current pending interrupts, and the mask
* for what it is available */
@@ -482,12 +481,10 @@ static void s3c_irq_demux_adc(unsigned int irq,
if (subsrc != 0) {
if (subsrc & 1) {
- mydesc = irq_desc + IRQ_TC;
- desc_handle_irq(IRQ_TC, mydesc);
+ generic_handle_irq(IRQ_TC);
}
if (subsrc & 2) {
- mydesc = irq_desc + IRQ_ADC;
- desc_handle_irq(IRQ_ADC, mydesc);
+ generic_handle_irq(IRQ_ADC);
}
}
}
@@ -496,7 +493,6 @@ static void s3c_irq_demux_uart(unsigned int start)
{
unsigned int subsrc, submsk;
unsigned int offset = start - IRQ_S3CUART_RX0;
- struct irq_desc *desc;
/* read the current pending interrupts, and the mask
* for what it is available */
@@ -512,20 +508,14 @@ static void s3c_irq_demux_uart(unsigned int start)
subsrc &= 7;
if (subsrc != 0) {
- desc = irq_desc + start;
-
if (subsrc & 1)
- desc_handle_irq(start, desc);
-
- desc++;
+ generic_handle_irq(start);
if (subsrc & 2)
- desc_handle_irq(start+1, desc);
-
- desc++;
+ generic_handle_irq(start+1);
if (subsrc & 4)
- desc_handle_irq(start+2, desc);
+ generic_handle_irq(start+2);
}
}
@@ -572,7 +562,7 @@ s3c_irq_demux_extint8(unsigned int irq,
eintpnd &= ~(1<<irq);
irq += (IRQ_EINT4 - 4);
- desc_handle_irq(irq, irq_desc + irq);
+ generic_handle_irq(irq);
}
}
@@ -595,7 +585,7 @@ s3c_irq_demux_extint4t7(unsigned int irq,
irq += (IRQ_EINT4 - 4);
- desc_handle_irq(irq, irq_desc + irq);
+ generic_handle_irq(irq);
}
}
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c
index 13bc655e1b6e..0601c5f3230b 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-irq.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c
@@ -44,7 +44,6 @@ static void s3c_irq_demux_cam(unsigned int irq,
struct irq_desc *desc)
{
unsigned int subsrc, submsk;
- struct irq_desc *mydesc;
/* read the current pending interrupts, and the mask
* for what it is available */
@@ -58,12 +57,10 @@ static void s3c_irq_demux_cam(unsigned int irq,
if (subsrc != 0) {
if (subsrc & 1) {
- mydesc = irq_desc + IRQ_S3C2440_CAM_C;
- desc_handle_irq(IRQ_S3C2440_CAM_C, mydesc);
+ generic_handle_irq(IRQ_S3C2440_CAM_C);
}
if (subsrc & 2) {
- mydesc = irq_desc + IRQ_S3C2440_CAM_P;
- desc_handle_irq(IRQ_S3C2440_CAM_P, mydesc);
+ generic_handle_irq(IRQ_S3C2440_CAM_P);
}
}
}
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index d402e8d813ce..3309e862f317 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -540,6 +540,15 @@ config SENSORS_LM93
This driver can also be built as a module. If so, the module
will be called lm93.
+config SENSORS_MAX1111
+ tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
+ depends on SPI_MASTER
+ help
+ Say y here to support Maxim's MAX1111 ADC chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called max1111.
+
config SENSORS_MAX1619
tristate "Maxim MAX1619 sensor chip"
depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 950134ab8426..6babc801b348 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_SENSORS_LM87) += lm87.o
obj-$(CONFIG_SENSORS_LM90) += lm90.o
obj-$(CONFIG_SENSORS_LM92) += lm92.o
obj-$(CONFIG_SENSORS_LM93) += lm93.o
+obj-$(CONFIG_SENSORS_MAX1111) += max1111.o
obj-$(CONFIG_SENSORS_MAX1619) += max1619.o
obj-$(CONFIG_SENSORS_MAX6650) += max6650.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
diff --git a/drivers/hwmon/max1111.c b/drivers/hwmon/max1111.c
new file mode 100644
index 000000000000..bfaa665ccf32
--- /dev/null
+++ b/drivers/hwmon/max1111.c
@@ -0,0 +1,244 @@
+/*
+ * max1111.c - +2.7V, Low-Power, Multichannel, Serial 8-bit ADCs
+ *
+ * Based on arch/arm/mach-pxa/corgi_ssp.c
+ *
+ * Copyright (C) 2004-2005 Richard Purdie
+ *
+ * Copyright (C) 2008 Marvell International Ltd.
+ * Eric Miao <eric.miao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/spi/spi.h>
+
+#define MAX1111_TX_BUF_SIZE 1
+#define MAX1111_RX_BUF_SIZE 2
+
+/* MAX1111 Commands */
+#define MAX1111_CTRL_PD0 (1u << 0)
+#define MAX1111_CTRL_PD1 (1u << 1)
+#define MAX1111_CTRL_SGL (1u << 2)
+#define MAX1111_CTRL_UNI (1u << 3)
+#define MAX1111_CTRL_SEL_SH (5) /* NOTE: bit 4 is ignored */
+#define MAX1111_CTRL_STR (1u << 7)
+
+struct max1111_data {
+ struct spi_device *spi;
+ struct device *hwmon_dev;
+ struct spi_message msg;
+ struct spi_transfer xfer[2];
+ uint8_t *tx_buf;
+ uint8_t *rx_buf;
+};
+
+static int max1111_read(struct device *dev, int channel)
+{
+ struct max1111_data *data = dev_get_drvdata(dev);
+ uint8_t v1, v2;
+ int err;
+
+ data->tx_buf[0] = (channel << MAX1111_CTRL_SEL_SH) |
+ MAX1111_CTRL_PD0 | MAX1111_CTRL_PD1 |
+ MAX1111_CTRL_SGL | MAX1111_CTRL_UNI | MAX1111_CTRL_STR;
+
+ err = spi_sync(data->spi, &data->msg);
+ if (err < 0) {
+ dev_err(dev, "spi_sync failed with %d\n", err);
+ return err;
+ }
+
+ v1 = data->rx_buf[0];
+ v2 = data->rx_buf[1];
+
+ if ((v1 & 0xc0) || (v2 & 0x3f))
+ return -EINVAL;
+
+ return (v1 << 2) | (v2 >> 6);
+}
+
+#ifdef CONFIG_SHARPSL_PM
+static struct max1111_data *the_max1111;
+
+int max1111_read_channel(int channel)
+{
+ return max1111_read(&the_max1111->spi->dev, channel);
+}
+EXPORT_SYMBOL(max1111_read_channel);
+#endif
+
+/*
+ * NOTE: SPI devices do not have a default 'name' attribute, which is
+ * likely to be used by hwmon applications to distinguish between
+ * different devices, explicitly add a name attribute here.
+ */
+static ssize_t show_name(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "max1111\n");
+}
+
+static ssize_t show_adc(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int channel = to_sensor_dev_attr(attr)->index;
+ int ret;
+
+ ret = max1111_read(dev, channel);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", ret);
+}
+
+#define MAX1111_ADC_ATTR(_id) \
+ SENSOR_DEVICE_ATTR(adc##_id##_in, S_IRUGO, show_adc, NULL, _id)
+
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+static MAX1111_ADC_ATTR(0);
+static MAX1111_ADC_ATTR(1);
+static MAX1111_ADC_ATTR(2);
+static MAX1111_ADC_ATTR(3);
+
+static struct attribute *max1111_attributes[] = {
+ &dev_attr_name.attr,
+ &sensor_dev_attr_adc0_in.dev_attr.attr,
+ &sensor_dev_attr_adc1_in.dev_attr.attr,
+ &sensor_dev_attr_adc2_in.dev_attr.attr,
+ &sensor_dev_attr_adc3_in.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group max1111_attr_group = {
+ .attrs = max1111_attributes,
+};
+
+static int setup_transfer(struct max1111_data *data)
+{
+ struct spi_message *m;
+ struct spi_transfer *x;
+
+ data->tx_buf = kmalloc(MAX1111_TX_BUF_SIZE, GFP_KERNEL);
+ if (!data->tx_buf)
+ return -ENOMEM;
+
+ data->rx_buf = kmalloc(MAX1111_RX_BUF_SIZE, GFP_KERNEL);
+ if (!data->rx_buf) {
+ kfree(data->tx_buf);
+ return -ENOMEM;
+ }
+
+ m = &data->msg;
+ x = &data->xfer[0];
+
+ spi_message_init(m);
+
+ x->tx_buf = &data->tx_buf[0];
+ x->len = 1;
+ spi_message_add_tail(x, m);
+
+ x++;
+ x->rx_buf = &data->rx_buf[0];
+ x->len = 2;
+ spi_message_add_tail(x, m);
+
+ return 0;
+}
+
+static int __devinit max1111_probe(struct spi_device *spi)
+{
+ struct max1111_data *data;
+ int err;
+
+ spi->bits_per_word = 8;
+ spi->mode = SPI_MODE_0;
+ err = spi_setup(spi);
+ if (err < 0)
+ return err;
+
+ data = kzalloc(sizeof(struct max1111_data), GFP_KERNEL);
+ if (data == NULL) {
+ dev_err(&spi->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ err = setup_transfer(data);
+ if (err)
+ goto err_free_data;
+
+ data->spi = spi;
+ spi_set_drvdata(spi, data);
+
+ err = sysfs_create_group(&spi->dev.kobj, &max1111_attr_group);
+ if (err) {
+ dev_err(&spi->dev, "failed to create attribute group\n");
+ goto err_free_all;
+ }
+
+ data->hwmon_dev = hwmon_device_register(&spi->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ dev_err(&spi->dev, "failed to create hwmon device\n");
+ err = PTR_ERR(data->hwmon_dev);
+ goto err_remove;
+ }
+
+#ifdef CONFIG_SHARPSL_PM
+ the_max1111 = data;
+#endif
+ return 0;
+
+err_remove:
+ sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
+err_free_all:
+ kfree(data->rx_buf);
+ kfree(data->tx_buf);
+err_free_data:
+ kfree(data);
+ return err;
+}
+
+static int __devexit max1111_remove(struct spi_device *spi)
+{
+ struct max1111_data *data = spi_get_drvdata(spi);
+
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
+ kfree(data->rx_buf);
+ kfree(data->tx_buf);
+ kfree(data);
+ return 0;
+}
+
+static struct spi_driver max1111_driver = {
+ .driver = {
+ .name = "max1111",
+ .owner = THIS_MODULE,
+ },
+ .probe = max1111_probe,
+ .remove = __devexit_p(max1111_remove),
+};
+
+static int __init max1111_init(void)
+{
+ return spi_register_driver(&max1111_driver);
+}
+module_init(max1111_init);
+
+static void __exit max1111_exit(void)
+{
+ spi_unregister_driver(&max1111_driver);
+}
+module_exit(max1111_exit);
+
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_DESCRIPTION("MAX1111 ADC Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 44d838410f15..906f9b9d715d 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -38,7 +38,44 @@
#include <asm/irq.h>
#include <asm/io.h>
#include <mach/i2c.h>
-#include <mach/pxa-regs.h>
+
+/*
+ * I2C registers and bit definitions
+ */
+#define IBMR (0x00)
+#define IDBR (0x08)
+#define ICR (0x10)
+#define ISR (0x18)
+#define ISAR (0x20)
+
+#define ICR_START (1 << 0) /* start bit */
+#define ICR_STOP (1 << 1) /* stop bit */
+#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */
+#define ICR_TB (1 << 3) /* transfer byte bit */
+#define ICR_MA (1 << 4) /* master abort */
+#define ICR_SCLE (1 << 5) /* master clock enable */
+#define ICR_IUE (1 << 6) /* unit enable */
+#define ICR_GCD (1 << 7) /* general call disable */
+#define ICR_ITEIE (1 << 8) /* enable tx interrupts */
+#define ICR_IRFIE (1 << 9) /* enable rx interrupts */
+#define ICR_BEIE (1 << 10) /* enable bus error ints */
+#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */
+#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */
+#define ICR_SADIE (1 << 13) /* slave address detected int enable */
+#define ICR_UR (1 << 14) /* unit reset */
+#define ICR_FM (1 << 15) /* fast mode */
+
+#define ISR_RWM (1 << 0) /* read/write mode */
+#define ISR_ACKNAK (1 << 1) /* ack/nak status */
+#define ISR_UB (1 << 2) /* unit busy */
+#define ISR_IBB (1 << 3) /* bus busy */
+#define ISR_SSD (1 << 4) /* slave stop detected */
+#define ISR_ALD (1 << 5) /* arbitration loss detected */
+#define ISR_ITE (1 << 6) /* tx buffer empty */
+#define ISR_IRF (1 << 7) /* rx buffer full */
+#define ISR_GCAD (1 << 8) /* general call address detected */
+#define ISR_SAD (1 << 9) /* slave address detected */
+#define ISR_BED (1 << 10) /* bus error no ACK/NAK */
struct pxa_i2c {
spinlock_t lock;
@@ -60,19 +97,21 @@ struct pxa_i2c {
u32 icrlog[32];
void __iomem *reg_base;
+ unsigned int reg_shift;
unsigned long iobase;
unsigned long iosize;
int irq;
- int use_pio;
+ unsigned int use_pio :1;
+ unsigned int fast_mode :1;
};
-#define _IBMR(i2c) ((i2c)->reg_base + 0)
-#define _IDBR(i2c) ((i2c)->reg_base + 8)
-#define _ICR(i2c) ((i2c)->reg_base + 0x10)
-#define _ISR(i2c) ((i2c)->reg_base + 0x18)
-#define _ISAR(i2c) ((i2c)->reg_base + 0x20)
+#define _IBMR(i2c) ((i2c)->reg_base + (0x0 << (i2c)->reg_shift))
+#define _IDBR(i2c) ((i2c)->reg_base + (0x4 << (i2c)->reg_shift))
+#define _ICR(i2c) ((i2c)->reg_base + (0x8 << (i2c)->reg_shift))
+#define _ISR(i2c) ((i2c)->reg_base + (0xc << (i2c)->reg_shift))
+#define _ISAR(i2c) ((i2c)->reg_base + (0x10 << (i2c)->reg_shift))
/*
* I2C Slave mode address
@@ -188,14 +227,14 @@ static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c)
static void i2c_pxa_abort(struct pxa_i2c *i2c)
{
- unsigned long timeout = jiffies + HZ/4;
+ int i = 250;
if (i2c_pxa_is_slavemode(i2c)) {
dev_dbg(&i2c->adap.dev, "%s: called in slave mode\n", __func__);
return;
}
- while (time_before(jiffies, timeout) && (readl(_IBMR(i2c)) & 0x1) == 0) {
+ while ((i > 0) && (readl(_IBMR(i2c)) & 0x1) == 0) {
unsigned long icr = readl(_ICR(i2c));
icr &= ~ICR_START;
@@ -205,7 +244,8 @@ static void i2c_pxa_abort(struct pxa_i2c *i2c)
show_state(i2c);
- msleep(1);
+ mdelay(1);
+ i --;
}
writel(readl(_ICR(i2c)) & ~(ICR_MA | ICR_START | ICR_STOP),
@@ -364,7 +404,7 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c)
writel(i2c->slave_addr, _ISAR(i2c));
/* set control register values */
- writel(I2C_ICR_INIT, _ICR(i2c));
+ writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c));
#ifdef CONFIG_I2C_PXA_SLAVE
dev_info(&i2c->adap.dev, "Enabling slave mode\n");
@@ -907,12 +947,6 @@ static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num
struct pxa_i2c *i2c = adap->algo_data;
int ret, i;
- /* If the I2C controller is disabled we need to reset it (probably due
- to a suspend/resume destroying state). We do this here as we can then
- avoid worrying about resuming the controller before its users. */
- if (!(readl(_ICR(i2c)) & ICR_IUE))
- i2c_pxa_reset(i2c);
-
for (i = adap->retries; i >= 0; i--) {
ret = i2c_pxa_do_xfer(i2c, msgs, num);
if (ret != I2C_RETRY)
@@ -993,6 +1027,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
ret = -EIO;
goto eremap;
}
+ i2c->reg_shift = (cpu_is_pxa3xx() && (dev->id == 1)) ? 0 : 1;
i2c->iobase = res->start;
i2c->iosize = res_len(res);
@@ -1013,6 +1048,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
if (plat) {
i2c->adap.class = plat->class;
i2c->use_pio = plat->use_pio;
+ i2c->fast_mode = plat->fast_mode;
}
if (i2c->use_pio) {
@@ -1082,9 +1118,33 @@ static int __exit i2c_pxa_remove(struct platform_device *dev)
return 0;
}
+#ifdef CONFIG_PM
+static int i2c_pxa_suspend_late(struct platform_device *dev, pm_message_t state)
+{
+ struct pxa_i2c *i2c = platform_get_drvdata(dev);
+ clk_disable(i2c->clk);
+ return 0;
+}
+
+static int i2c_pxa_resume_early(struct platform_device *dev)
+{
+ struct pxa_i2c *i2c = platform_get_drvdata(dev);
+
+ clk_enable(i2c->clk);
+ i2c_pxa_reset(i2c);
+
+ return 0;
+}
+#else
+#define i2c_pxa_suspend_late NULL
+#define i2c_pxa_resume_early NULL
+#endif
+
static struct platform_driver i2c_pxa_driver = {
.probe = i2c_pxa_probe,
.remove = __exit_p(i2c_pxa_remove),
+ .suspend_late = i2c_pxa_suspend_late,
+ .resume_early = i2c_pxa_resume_early,
.driver = {
.name = "pxa2xx-i2c",
.owner = THIS_MODULE,
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index 134e67bf6a90..c8ed065ea0cb 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -80,9 +80,9 @@ struct corgikbd {
#define KB_ACTIVATE_DELAY 10
/* Helper functions for reading the keyboard matrix
- * Note: We should really be using pxa_gpio_mode to alter GPDR but it
- * requires a function call per GPIO bit which is excessive
- * when we need to access 12 bits at once multiple times.
+ * Note: We should really be using the generic gpio functions to alter
+ * GPDR but it requires a function call per GPIO bit which is
+ * excessive when we need to access 12 bits at once, multiple times.
* These functions must be called within local_irq_save()/local_irq_restore()
* or similar.
*/
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index de67b8e0a799..c48b76a46a58 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -101,9 +101,9 @@ struct spitzkbd {
#define KB_ACTIVATE_DELAY 10
/* Helper functions for reading the keyboard matrix
- * Note: We should really be using pxa_gpio_mode to alter GPDR but it
- * requires a function call per GPIO bit which is excessive
- * when we need to access 11 bits at once, multiple times.
+ * Note: We should really be using the generic gpio functions to alter
+ * GPDR but it requires a function call per GPIO bit which is
+ * excessive when we need to access 11 bits at once, multiple times.
* These functions must be called within local_irq_save()/local_irq_restore()
* or similar.
*/
diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c
index 44cb50af3ce9..677276b12020 100644
--- a/drivers/input/keyboard/tosakbd.c
+++ b/drivers/input/keyboard/tosakbd.c
@@ -59,9 +59,9 @@ struct tosakbd {
/* Helper functions for reading the keyboard matrix
- * Note: We should really be using pxa_gpio_mode to alter GPDR but it
- * requires a function call per GPIO bit which is excessive
- * when we need to access 12 bits at once, multiple times.
+ * Note: We should really be using the generic gpio functions to alter
+ * GPDR but it requires a function call per GPIO bit which is
+ * excessive when we need to access 12 bits at once, multiple times.
* These functions must be called within local_irq_save()/local_irq_restore()
* or similar.
*/
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 25287e80e236..6e1e8c624f9e 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -220,6 +220,7 @@ config TOUCHSCREEN_ATMEL_TSADCC
config TOUCHSCREEN_UCB1400
tristate "Philips UCB1400 touchscreen"
select AC97_BUS
+ depends on UCB1400_CORE
help
This enables support for the Philips UCB1400 touchscreen interface.
The UCB1400 is an AC97 audio codec. The touchscreen interface
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index ce6f48c695f5..8583c766d565 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -24,6 +24,7 @@
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
+#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <asm/irq.h>
@@ -116,6 +117,7 @@ struct ads7846 {
void *filter_data;
void (*filter_cleanup)(void *data);
int (*get_pendown_state)(void);
+ int gpio_pendown;
};
/* leave chip selected when we're done, for quicker re-select? */
@@ -491,6 +493,14 @@ static struct attribute_group ads784x_attr_group = {
/*--------------------------------------------------------------------------*/
+static int get_pendown_state(struct ads7846 *ts)
+{
+ if (ts->get_pendown_state)
+ return ts->get_pendown_state();
+
+ return !gpio_get_value(ts->gpio_pendown);
+}
+
/*
* PENIRQ only kicks the timer. The timer only reissues the SPI transfer,
* to retrieve touchscreen status.
@@ -550,7 +560,7 @@ static void ads7846_rx(void *ads)
*/
if (ts->penirq_recheck_delay_usecs) {
udelay(ts->penirq_recheck_delay_usecs);
- if (!ts->get_pendown_state())
+ if (!get_pendown_state(ts))
Rt = 0;
}
@@ -677,7 +687,7 @@ static enum hrtimer_restart ads7846_timer(struct hrtimer *handle)
spin_lock_irq(&ts->lock);
- if (unlikely(!ts->get_pendown_state() ||
+ if (unlikely(!get_pendown_state(ts) ||
device_suspended(&ts->spi->dev))) {
if (ts->pendown) {
struct input_dev *input = ts->input;
@@ -716,7 +726,7 @@ static irqreturn_t ads7846_irq(int irq, void *handle)
unsigned long flags;
spin_lock_irqsave(&ts->lock, flags);
- if (likely(ts->get_pendown_state())) {
+ if (likely(get_pendown_state(ts))) {
if (!ts->irq_disabled) {
/* The ARM do_simple_IRQ() dispatcher doesn't act
* like the other dispatchers: it will report IRQs
@@ -806,6 +816,36 @@ static int ads7846_resume(struct spi_device *spi)
return 0;
}
+static int __devinit setup_pendown(struct spi_device *spi, struct ads7846 *ts)
+{
+ struct ads7846_platform_data *pdata = spi->dev.platform_data;
+ int err;
+
+ /* REVISIT when the irq can be triggered active-low, or if for some
+ * reason the touchscreen isn't hooked up, we don't need to access
+ * the pendown state.
+ */
+ if (!pdata->get_pendown_state && !gpio_is_valid(pdata->gpio_pendown)) {
+ dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
+ return -EINVAL;
+ }
+
+ if (pdata->get_pendown_state) {
+ ts->get_pendown_state = pdata->get_pendown_state;
+ return 0;
+ }
+
+ err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
+ if (err) {
+ dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
+ pdata->gpio_pendown);
+ return err;
+ }
+
+ ts->gpio_pendown = pdata->gpio_pendown;
+ return 0;
+}
+
static int __devinit ads7846_probe(struct spi_device *spi)
{
struct ads7846 *ts;
@@ -833,15 +873,6 @@ static int __devinit ads7846_probe(struct spi_device *spi)
return -EINVAL;
}
- /* REVISIT when the irq can be triggered active-low, or if for some
- * reason the touchscreen isn't hooked up, we don't need to access
- * the pendown state.
- */
- if (pdata->get_pendown_state == NULL) {
- dev_dbg(&spi->dev, "no get_pendown_state function?\n");
- return -EINVAL;
- }
-
/* We'd set TX wordsize 8 bits and RX wordsize to 13 bits ... except
* that even if the hardware can do that, the SPI controller driver
* may not. So we stick to very-portable 8 bit words, both RX and TX.
@@ -893,7 +924,10 @@ static int __devinit ads7846_probe(struct spi_device *spi)
ts->filter_data = ts;
} else
ts->filter = ads7846_no_filter;
- ts->get_pendown_state = pdata->get_pendown_state;
+
+ err = setup_pendown(spi, ts);
+ if (err)
+ goto err_cleanup_filter;
if (pdata->penirq_recheck_delay_usecs)
ts->penirq_recheck_delay_usecs =
@@ -1085,7 +1119,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
spi->dev.driver->name, ts)) {
dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
err = -EBUSY;
- goto err_cleanup_filter;
+ goto err_free_gpio;
}
err = ads784x_hwmon_register(spi, ts);
@@ -1116,6 +1150,9 @@ static int __devinit ads7846_probe(struct spi_device *spi)
ads784x_hwmon_unregister(spi, ts);
err_free_irq:
free_irq(spi->irq, ts);
+ err_free_gpio:
+ if (ts->gpio_pendown != -1)
+ gpio_free(ts->gpio_pendown);
err_cleanup_filter:
if (ts->filter_cleanup)
ts->filter_cleanup(ts->filter_data);
@@ -1140,6 +1177,9 @@ static int __devexit ads7846_remove(struct spi_device *spi)
/* suspend left the IRQ disabled */
enable_irq(ts->spi->irq);
+ if (ts->gpio_pendown != -1)
+ gpio_free(ts->gpio_pendown);
+
if (ts->filter_cleanup)
ts->filter_cleanup(ts->filter_data);
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index bce018e45bce..54986627def0 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -5,6 +5,10 @@
* Created: September 25, 2006
* Copyright: MontaVista Software, Inc.
*
+ * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
+ * If something doesnt work and it worked before spliting, e-mail me,
+ * dont bother Nicolas please ;-)
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -25,124 +29,16 @@
#include <linux/slab.h>
#include <linux/kthread.h>
#include <linux/freezer.h>
-
-#include <sound/core.h>
-#include <sound/ac97_codec.h>
-
-
-/*
- * Interesting UCB1400 AC-link registers
- */
-
-#define UCB_IE_RIS 0x5e
-#define UCB_IE_FAL 0x60
-#define UCB_IE_STATUS 0x62
-#define UCB_IE_CLEAR 0x62
-#define UCB_IE_ADC (1 << 11)
-#define UCB_IE_TSPX (1 << 12)
-
-#define UCB_TS_CR 0x64
-#define UCB_TS_CR_TSMX_POW (1 << 0)
-#define UCB_TS_CR_TSPX_POW (1 << 1)
-#define UCB_TS_CR_TSMY_POW (1 << 2)
-#define UCB_TS_CR_TSPY_POW (1 << 3)
-#define UCB_TS_CR_TSMX_GND (1 << 4)
-#define UCB_TS_CR_TSPX_GND (1 << 5)
-#define UCB_TS_CR_TSMY_GND (1 << 6)
-#define UCB_TS_CR_TSPY_GND (1 << 7)
-#define UCB_TS_CR_MODE_INT (0 << 8)
-#define UCB_TS_CR_MODE_PRES (1 << 8)
-#define UCB_TS_CR_MODE_POS (2 << 8)
-#define UCB_TS_CR_BIAS_ENA (1 << 11)
-#define UCB_TS_CR_TSPX_LOW (1 << 12)
-#define UCB_TS_CR_TSMX_LOW (1 << 13)
-
-#define UCB_ADC_CR 0x66
-#define UCB_ADC_SYNC_ENA (1 << 0)
-#define UCB_ADC_VREFBYP_CON (1 << 1)
-#define UCB_ADC_INP_TSPX (0 << 2)
-#define UCB_ADC_INP_TSMX (1 << 2)
-#define UCB_ADC_INP_TSPY (2 << 2)
-#define UCB_ADC_INP_TSMY (3 << 2)
-#define UCB_ADC_INP_AD0 (4 << 2)
-#define UCB_ADC_INP_AD1 (5 << 2)
-#define UCB_ADC_INP_AD2 (6 << 2)
-#define UCB_ADC_INP_AD3 (7 << 2)
-#define UCB_ADC_EXT_REF (1 << 5)
-#define UCB_ADC_START (1 << 7)
-#define UCB_ADC_ENA (1 << 15)
-
-#define UCB_ADC_DATA 0x68
-#define UCB_ADC_DAT_VALID (1 << 15)
-#define UCB_ADC_DAT_VALUE(x) ((x) & 0x3ff)
-
-#define UCB_ID 0x7e
-#define UCB_ID_1400 0x4304
-
-
-struct ucb1400 {
- struct snd_ac97 *ac97;
- struct input_dev *ts_idev;
-
- int irq;
-
- wait_queue_head_t ts_wait;
- struct task_struct *ts_task;
-
- unsigned int irq_pending; /* not bit field shared */
- unsigned int ts_restart:1;
- unsigned int adcsync:1;
-};
+#include <linux/ucb1400.h>
static int adcsync;
static int ts_delay = 55; /* us */
static int ts_delay_pressure; /* us */
-static inline u16 ucb1400_reg_read(struct ucb1400 *ucb, u16 reg)
-{
- return ucb->ac97->bus->ops->read(ucb->ac97, reg);
-}
-
-static inline void ucb1400_reg_write(struct ucb1400 *ucb, u16 reg, u16 val)
-{
- ucb->ac97->bus->ops->write(ucb->ac97, reg, val);
-}
-
-static inline void ucb1400_adc_enable(struct ucb1400 *ucb)
-{
- ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA);
-}
-
-static unsigned int ucb1400_adc_read(struct ucb1400 *ucb, u16 adc_channel)
-{
- unsigned int val;
-
- if (ucb->adcsync)
- adc_channel |= UCB_ADC_SYNC_ENA;
-
- ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | adc_channel);
- ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | adc_channel | UCB_ADC_START);
-
- for (;;) {
- val = ucb1400_reg_read(ucb, UCB_ADC_DATA);
- if (val & UCB_ADC_DAT_VALID)
- break;
- /* yield to other processes */
- schedule_timeout_uninterruptible(1);
- }
-
- return UCB_ADC_DAT_VALUE(val);
-}
-
-static inline void ucb1400_adc_disable(struct ucb1400 *ucb)
-{
- ucb1400_reg_write(ucb, UCB_ADC_CR, 0);
-}
-
/* Switch to interrupt mode. */
-static inline void ucb1400_ts_mode_int(struct ucb1400 *ucb)
+static inline void ucb1400_ts_mode_int(struct snd_ac97 *ac97)
{
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
UCB_TS_CR_MODE_INT);
@@ -152,14 +48,14 @@ static inline void ucb1400_ts_mode_int(struct ucb1400 *ucb)
* Switch to pressure mode, and read pressure. We don't need to wait
* here, since both plates are being driven.
*/
-static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb)
{
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
udelay(ts_delay_pressure);
- return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPY);
+ return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
}
/*
@@ -168,21 +64,21 @@ static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400 *ucb)
* gives a faster response time. Even so, we need to wait about 55us
* for things to stabilise.
*/
-static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb)
{
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
udelay(ts_delay);
- return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPY);
+ return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
}
/*
@@ -191,63 +87,63 @@ static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400 *ucb)
* gives a faster response time. Even so, we need to wait about 55us
* for things to stabilise.
*/
-static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb)
{
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
udelay(ts_delay);
- return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPX);
+ return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPX, adcsync);
}
/*
* Switch to X plate resistance mode. Set MX to ground, PX to
* supply. Measure current.
*/
-static inline unsigned int ucb1400_ts_read_xres(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb)
{
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
- return ucb1400_adc_read(ucb, 0);
+ return ucb1400_adc_read(ucb->ac97, 0, adcsync);
}
/*
* Switch to Y plate resistance mode. Set MY to ground, PY to
* supply. Measure current.
*/
-static inline unsigned int ucb1400_ts_read_yres(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb)
{
- ucb1400_reg_write(ucb, UCB_TS_CR,
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
- return ucb1400_adc_read(ucb, 0);
+ return ucb1400_adc_read(ucb->ac97, 0, adcsync);
}
-static inline int ucb1400_ts_pen_down(struct ucb1400 *ucb)
+static inline int ucb1400_ts_pen_down(struct snd_ac97 *ac97)
{
- unsigned short val = ucb1400_reg_read(ucb, UCB_TS_CR);
- return (val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW));
+ unsigned short val = ucb1400_reg_read(ac97, UCB_TS_CR);
+ return val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW);
}
-static inline void ucb1400_ts_irq_enable(struct ucb1400 *ucb)
+static inline void ucb1400_ts_irq_enable(struct snd_ac97 *ac97)
{
- ucb1400_reg_write(ucb, UCB_IE_CLEAR, UCB_IE_TSPX);
- ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
- ucb1400_reg_write(ucb, UCB_IE_FAL, UCB_IE_TSPX);
+ ucb1400_reg_write(ac97, UCB_IE_CLEAR, UCB_IE_TSPX);
+ ucb1400_reg_write(ac97, UCB_IE_CLEAR, 0);
+ ucb1400_reg_write(ac97, UCB_IE_FAL, UCB_IE_TSPX);
}
-static inline void ucb1400_ts_irq_disable(struct ucb1400 *ucb)
+static inline void ucb1400_ts_irq_disable(struct snd_ac97 *ac97)
{
- ucb1400_reg_write(ucb, UCB_IE_FAL, 0);
+ ucb1400_reg_write(ac97, UCB_IE_FAL, 0);
}
static void ucb1400_ts_evt_add(struct input_dev *idev, u16 pressure, u16 x, u16 y)
@@ -264,25 +160,24 @@ static void ucb1400_ts_event_release(struct input_dev *idev)
input_sync(idev);
}
-static void ucb1400_handle_pending_irq(struct ucb1400 *ucb)
+static void ucb1400_handle_pending_irq(struct ucb1400_ts *ucb)
{
unsigned int isr;
- isr = ucb1400_reg_read(ucb, UCB_IE_STATUS);
- ucb1400_reg_write(ucb, UCB_IE_CLEAR, isr);
- ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
+ isr = ucb1400_reg_read(ucb->ac97, UCB_IE_STATUS);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, isr);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
- if (isr & UCB_IE_TSPX)
- ucb1400_ts_irq_disable(ucb);
- else
+ if (isr & UCB_IE_TSPX) {
+ ucb1400_ts_irq_disable(ucb->ac97);
+ enable_irq(ucb->irq);
+ } else
printk(KERN_ERR "ucb1400: unexpected IE_STATUS = %#x\n", isr);
-
- enable_irq(ucb->irq);
}
static int ucb1400_ts_thread(void *_ucb)
{
- struct ucb1400 *ucb = _ucb;
+ struct ucb1400_ts *ucb = _ucb;
struct task_struct *tsk = current;
int valid = 0;
struct sched_param param = { .sched_priority = 1 };
@@ -301,19 +196,19 @@ static int ucb1400_ts_thread(void *_ucb)
ucb1400_handle_pending_irq(ucb);
}
- ucb1400_adc_enable(ucb);
+ ucb1400_adc_enable(ucb->ac97);
x = ucb1400_ts_read_xpos(ucb);
y = ucb1400_ts_read_ypos(ucb);
p = ucb1400_ts_read_pressure(ucb);
- ucb1400_adc_disable(ucb);
+ ucb1400_adc_disable(ucb->ac97);
/* Switch back to interrupt mode. */
- ucb1400_ts_mode_int(ucb);
+ ucb1400_ts_mode_int(ucb->ac97);
msleep(10);
- if (ucb1400_ts_pen_down(ucb)) {
- ucb1400_ts_irq_enable(ucb);
+ if (ucb1400_ts_pen_down(ucb->ac97)) {
+ ucb1400_ts_irq_enable(ucb->ac97);
/*
* If we spat out a valid sample set last time,
@@ -332,8 +227,8 @@ static int ucb1400_ts_thread(void *_ucb)
}
wait_event_freezable_timeout(ucb->ts_wait,
- ucb->irq_pending || ucb->ts_restart || kthread_should_stop(),
- timeout);
+ ucb->irq_pending || ucb->ts_restart ||
+ kthread_should_stop(), timeout);
}
/* Send the "pen off" if we are stopping with the pen still active */
@@ -356,7 +251,7 @@ static int ucb1400_ts_thread(void *_ucb)
*/
static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid)
{
- struct ucb1400 *ucb = devid;
+ struct ucb1400_ts *ucb = devid;
if (irqnr == ucb->irq) {
disable_irq(ucb->irq);
@@ -369,7 +264,7 @@ static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid)
static int ucb1400_ts_open(struct input_dev *idev)
{
- struct ucb1400 *ucb = input_get_drvdata(idev);
+ struct ucb1400_ts *ucb = input_get_drvdata(idev);
int ret = 0;
BUG_ON(ucb->ts_task);
@@ -385,34 +280,14 @@ static int ucb1400_ts_open(struct input_dev *idev)
static void ucb1400_ts_close(struct input_dev *idev)
{
- struct ucb1400 *ucb = input_get_drvdata(idev);
+ struct ucb1400_ts *ucb = input_get_drvdata(idev);
if (ucb->ts_task)
kthread_stop(ucb->ts_task);
- ucb1400_ts_irq_disable(ucb);
- ucb1400_reg_write(ucb, UCB_TS_CR, 0);
-}
-
-#ifdef CONFIG_PM
-static int ucb1400_ts_resume(struct device *dev)
-{
- struct ucb1400 *ucb = dev_get_drvdata(dev);
-
- if (ucb->ts_task) {
- /*
- * Restart the TS thread to ensure the
- * TS interrupt mode is set up again
- * after sleep.
- */
- ucb->ts_restart = 1;
- wake_up(&ucb->ts_wait);
- }
- return 0;
+ ucb1400_ts_irq_disable(ucb->ac97);
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR, 0);
}
-#else
-#define ucb1400_ts_resume NULL
-#endif
#ifndef NO_IRQ
#define NO_IRQ 0
@@ -422,25 +297,26 @@ static int ucb1400_ts_resume(struct device *dev)
* Try to probe our interrupt, rather than relying on lots of
* hard-coded machine dependencies.
*/
-static int ucb1400_detect_irq(struct ucb1400 *ucb)
+static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb)
{
unsigned long mask, timeout;
mask = probe_irq_on();
/* Enable the ADC interrupt. */
- ucb1400_reg_write(ucb, UCB_IE_RIS, UCB_IE_ADC);
- ucb1400_reg_write(ucb, UCB_IE_FAL, UCB_IE_ADC);
- ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
- ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, UCB_IE_ADC);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, UCB_IE_ADC);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
/* Cause an ADC interrupt. */
- ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA);
- ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
+ ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA);
+ ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
/* Wait for the conversion to complete. */
timeout = jiffies + HZ/2;
- while (!(ucb1400_reg_read(ucb, UCB_ADC_DATA) & UCB_ADC_DAT_VALID)) {
+ while (!(ucb1400_reg_read(ucb->ac97, UCB_ADC_DATA) &
+ UCB_ADC_DAT_VALID)) {
cpu_relax();
if (time_after(jiffies, timeout)) {
printk(KERN_ERR "ucb1400: timed out in IRQ probe\n");
@@ -448,13 +324,13 @@ static int ucb1400_detect_irq(struct ucb1400 *ucb)
return -ENODEV;
}
}
- ucb1400_reg_write(ucb, UCB_ADC_CR, 0);
+ ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, 0);
/* Disable and clear interrupt. */
- ucb1400_reg_write(ucb, UCB_IE_RIS, 0);
- ucb1400_reg_write(ucb, UCB_IE_FAL, 0);
- ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
- ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, 0);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, 0);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
/* Read triggered interrupt. */
ucb->irq = probe_irq_off(mask);
@@ -464,36 +340,25 @@ static int ucb1400_detect_irq(struct ucb1400 *ucb)
return 0;
}
-static int ucb1400_ts_probe(struct device *dev)
+static int ucb1400_ts_probe(struct platform_device *dev)
{
- struct ucb1400 *ucb;
- struct input_dev *idev;
- int error, id, x_res, y_res;
+ int error, x_res, y_res;
+ struct ucb1400_ts *ucb = dev->dev.platform_data;
- ucb = kzalloc(sizeof(struct ucb1400), GFP_KERNEL);
- idev = input_allocate_device();
- if (!ucb || !idev) {
+ ucb->ts_idev = input_allocate_device();
+ if (!ucb->ts_idev) {
error = -ENOMEM;
- goto err_free_devs;
+ goto err;
}
- ucb->ts_idev = idev;
- ucb->adcsync = adcsync;
- ucb->ac97 = to_ac97_t(dev);
- init_waitqueue_head(&ucb->ts_wait);
-
- id = ucb1400_reg_read(ucb, UCB_ID);
- if (id != UCB_ID_1400) {
- error = -ENODEV;
- goto err_free_devs;
- }
-
- error = ucb1400_detect_irq(ucb);
+ error = ucb1400_ts_detect_irq(ucb);
if (error) {
printk(KERN_ERR "UCB1400: IRQ probe failed\n");
goto err_free_devs;
}
+ init_waitqueue_head(&ucb->ts_wait);
+
error = request_irq(ucb->irq, ucb1400_hard_irq, IRQF_TRIGGER_RISING,
"UCB1400", ucb);
if (error) {
@@ -503,80 +368,101 @@ static int ucb1400_ts_probe(struct device *dev)
}
printk(KERN_DEBUG "UCB1400: found IRQ %d\n", ucb->irq);
- input_set_drvdata(idev, ucb);
+ input_set_drvdata(ucb->ts_idev, ucb);
- idev->dev.parent = dev;
- idev->name = "UCB1400 touchscreen interface";
- idev->id.vendor = ucb1400_reg_read(ucb, AC97_VENDOR_ID1);
- idev->id.product = id;
- idev->open = ucb1400_ts_open;
- idev->close = ucb1400_ts_close;
- idev->evbit[0] = BIT_MASK(EV_ABS);
+ ucb->ts_idev->dev.parent = &dev->dev;
+ ucb->ts_idev->name = "UCB1400 touchscreen interface";
+ ucb->ts_idev->id.vendor = ucb1400_reg_read(ucb->ac97,
+ AC97_VENDOR_ID1);
+ ucb->ts_idev->id.product = ucb->id;
+ ucb->ts_idev->open = ucb1400_ts_open;
+ ucb->ts_idev->close = ucb1400_ts_close;
+ ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS);
- ucb1400_adc_enable(ucb);
+ ucb1400_adc_enable(ucb->ac97);
x_res = ucb1400_ts_read_xres(ucb);
y_res = ucb1400_ts_read_yres(ucb);
- ucb1400_adc_disable(ucb);
+ ucb1400_adc_disable(ucb->ac97);
printk(KERN_DEBUG "UCB1400: x/y = %d/%d\n", x_res, y_res);
- input_set_abs_params(idev, ABS_X, 0, x_res, 0, 0);
- input_set_abs_params(idev, ABS_Y, 0, y_res, 0, 0);
- input_set_abs_params(idev, ABS_PRESSURE, 0, 0, 0, 0);
+ input_set_abs_params(ucb->ts_idev, ABS_X, 0, x_res, 0, 0);
+ input_set_abs_params(ucb->ts_idev, ABS_Y, 0, y_res, 0, 0);
+ input_set_abs_params(ucb->ts_idev, ABS_PRESSURE, 0, 0, 0, 0);
- error = input_register_device(idev);
+ error = input_register_device(ucb->ts_idev);
if (error)
goto err_free_irq;
- dev_set_drvdata(dev, ucb);
return 0;
- err_free_irq:
+err_free_irq:
free_irq(ucb->irq, ucb);
- err_free_devs:
- input_free_device(idev);
- kfree(ucb);
+err_free_devs:
+ input_free_device(ucb->ts_idev);
+err:
return error;
+
}
-static int ucb1400_ts_remove(struct device *dev)
+static int ucb1400_ts_remove(struct platform_device *dev)
{
- struct ucb1400 *ucb = dev_get_drvdata(dev);
+ struct ucb1400_ts *ucb = dev->dev.platform_data;
free_irq(ucb->irq, ucb);
input_unregister_device(ucb->ts_idev);
- dev_set_drvdata(dev, NULL);
- kfree(ucb);
return 0;
}
-static struct device_driver ucb1400_ts_driver = {
- .name = "ucb1400_ts",
- .owner = THIS_MODULE,
- .bus = &ac97_bus_type,
- .probe = ucb1400_ts_probe,
- .remove = ucb1400_ts_remove,
- .resume = ucb1400_ts_resume,
+#ifdef CONFIG_PM
+static int ucb1400_ts_resume(struct platform_device *dev)
+{
+ struct ucb1400_ts *ucb = platform_get_drvdata(dev);
+
+ if (ucb->ts_task) {
+ /*
+ * Restart the TS thread to ensure the
+ * TS interrupt mode is set up again
+ * after sleep.
+ */
+ ucb->ts_restart = 1;
+ wake_up(&ucb->ts_wait);
+ }
+ return 0;
+}
+#else
+#define ucb1400_ts_resume NULL
+#endif
+
+static struct platform_driver ucb1400_ts_driver = {
+ .probe = ucb1400_ts_probe,
+ .remove = ucb1400_ts_remove,
+ .resume = ucb1400_ts_resume,
+ .driver = {
+ .name = "ucb1400_ts",
+ },
};
static int __init ucb1400_ts_init(void)
{
- return driver_register(&ucb1400_ts_driver);
+ return platform_driver_register(&ucb1400_ts_driver);
}
static void __exit ucb1400_ts_exit(void)
{
- driver_unregister(&ucb1400_ts_driver);
+ platform_driver_unregister(&ucb1400_ts_driver);
}
module_param(adcsync, bool, 0444);
MODULE_PARM_DESC(adcsync, "Synchronize touch readings with ADCSYNC pin.");
module_param(ts_delay, int, 0444);
-MODULE_PARM_DESC(ts_delay, "Delay between panel setup and position read. Default = 55us.");
+MODULE_PARM_DESC(ts_delay, "Delay between panel setup and"
+ " position read. Default = 55us.");
module_param(ts_delay_pressure, int, 0444);
MODULE_PARM_DESC(ts_delay_pressure,
- "delay between panel setup and pressure read. Default = 0us.");
+ "delay between panel setup and pressure read."
+ " Default = 0us.");
module_init(ucb1400_ts_init);
module_exit(ucb1400_ts_exit);
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9556262dda5a..5b14262af017 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -24,13 +24,6 @@ config LEDS_ATMEL_PWM
This option enables support for LEDs driven using outputs
of the dedicated PWM controller found on newer Atmel SOCs.
-config LEDS_CORGI
- tristate "LED Support for the Sharp SL-C7x0 series"
- depends on LEDS_CLASS && PXA_SHARP_C7xx
- help
- This option enables support for the LEDs on Sharp Zaurus
- SL-C7x0 series (C700, C750, C760, C860).
-
config LEDS_LOCOMO
tristate "LED Support for Locomo device"
depends on LEDS_CLASS && SHARP_LOCOMO
@@ -38,13 +31,6 @@ config LEDS_LOCOMO
This option enables support for the LEDs on Sharp Locomo.
Zaurus models SL-5500 and SL-5600.
-config LEDS_SPITZ
- tristate "LED Support for the Sharp SL-Cxx00 series"
- depends on LEDS_CLASS && PXA_SHARP_Cxx00
- help
- This option enables support for the LEDs on Sharp Zaurus
- SL-Cxx00 series (C1000, C3000, C3100).
-
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
depends on LEDS_CLASS && ARCH_S3C2410
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index ff7982b44565..3a8e6a04363c 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -6,9 +6,7 @@ obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
# LED Platform Drivers
obj-$(CONFIG_LEDS_ATMEL_PWM) += leds-atmel-pwm.o
-obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
-obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o
obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o
obj-$(CONFIG_LEDS_AMS_DELTA) += leds-ams-delta.o
obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
diff --git a/drivers/leds/leds-corgi.c b/drivers/leds/leds-corgi.c
deleted file mode 100644
index bc2dcd89f635..000000000000
--- a/drivers/leds/leds-corgi.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * LED Triggers Core
- *
- * Copyright 2005-2006 Openedhand Ltd.
- *
- * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <mach/corgi.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <asm/hardware/scoop.h>
-
-static void corgiled_amber_set(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- if (value)
- GPSR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE);
- else
- GPCR0 = GPIO_bit(CORGI_GPIO_LED_ORANGE);
-}
-
-static void corgiled_green_set(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- if (value)
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
- else
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
-}
-
-static struct led_classdev corgi_amber_led = {
- .name = "corgi:amber:charge",
- .default_trigger = "sharpsl-charge",
- .brightness_set = corgiled_amber_set,
-};
-
-static struct led_classdev corgi_green_led = {
- .name = "corgi:green:mail",
- .default_trigger = "nand-disk",
- .brightness_set = corgiled_green_set,
-};
-
-#ifdef CONFIG_PM
-static int corgiled_suspend(struct platform_device *dev, pm_message_t state)
-{
-#ifdef CONFIG_LEDS_TRIGGERS
- if (corgi_amber_led.trigger &&
- strcmp(corgi_amber_led.trigger->name, "sharpsl-charge"))
-#endif
- led_classdev_suspend(&corgi_amber_led);
- led_classdev_suspend(&corgi_green_led);
- return 0;
-}
-
-static int corgiled_resume(struct platform_device *dev)
-{
- led_classdev_resume(&corgi_amber_led);
- led_classdev_resume(&corgi_green_led);
- return 0;
-}
-#endif
-
-static int corgiled_probe(struct platform_device *pdev)
-{
- int ret;
-
- ret = led_classdev_register(&pdev->dev, &corgi_amber_led);
- if (ret < 0)
- return ret;
-
- ret = led_classdev_register(&pdev->dev, &corgi_green_led);
- if (ret < 0)
- led_classdev_unregister(&corgi_amber_led);
-
- return ret;
-}
-
-static int corgiled_remove(struct platform_device *pdev)
-{
- led_classdev_unregister(&corgi_amber_led);
- led_classdev_unregister(&corgi_green_led);
- return 0;
-}
-
-static struct platform_driver corgiled_driver = {
- .probe = corgiled_probe,
- .remove = corgiled_remove,
-#ifdef CONFIG_PM
- .suspend = corgiled_suspend,
- .resume = corgiled_resume,
-#endif
- .driver = {
- .name = "corgi-led",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init corgiled_init(void)
-{
- return platform_driver_register(&corgiled_driver);
-}
-
-static void __exit corgiled_exit(void)
-{
- platform_driver_unregister(&corgiled_driver);
-}
-
-module_init(corgiled_init);
-module_exit(corgiled_exit);
-
-MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
-MODULE_DESCRIPTION("Corgi LED driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:corgi-led");
diff --git a/drivers/leds/leds-spitz.c b/drivers/leds/leds-spitz.c
deleted file mode 100644
index 178831c64bfb..000000000000
--- a/drivers/leds/leds-spitz.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * LED Triggers Core
- *
- * Copyright 2005-2006 Openedhand Ltd.
- *
- * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <asm/hardware/scoop.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/spitz.h>
-
-static void spitzled_amber_set(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- if (value)
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE);
- else
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_ORANGE);
-}
-
-static void spitzled_green_set(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- if (value)
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
- else
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
-}
-
-static struct led_classdev spitz_amber_led = {
- .name = "spitz:amber:charge",
- .default_trigger = "sharpsl-charge",
- .brightness_set = spitzled_amber_set,
-};
-
-static struct led_classdev spitz_green_led = {
- .name = "spitz:green:hddactivity",
- .default_trigger = "ide-disk",
- .brightness_set = spitzled_green_set,
-};
-
-#ifdef CONFIG_PM
-static int spitzled_suspend(struct platform_device *dev, pm_message_t state)
-{
-#ifdef CONFIG_LEDS_TRIGGERS
- if (spitz_amber_led.trigger &&
- strcmp(spitz_amber_led.trigger->name, "sharpsl-charge"))
-#endif
- led_classdev_suspend(&spitz_amber_led);
- led_classdev_suspend(&spitz_green_led);
- return 0;
-}
-
-static int spitzled_resume(struct platform_device *dev)
-{
- led_classdev_resume(&spitz_amber_led);
- led_classdev_resume(&spitz_green_led);
- return 0;
-}
-#endif
-
-static int spitzled_probe(struct platform_device *pdev)
-{
- int ret;
-
- if (machine_is_akita()) {
- spitz_green_led.name = "spitz:green:mail";
- spitz_green_led.default_trigger = "nand-disk";
- }
-
- ret = led_classdev_register(&pdev->dev, &spitz_amber_led);
- if (ret < 0)
- return ret;
-
- ret = led_classdev_register(&pdev->dev, &spitz_green_led);
- if (ret < 0)
- led_classdev_unregister(&spitz_amber_led);
-
- return ret;
-}
-
-static int spitzled_remove(struct platform_device *pdev)
-{
- led_classdev_unregister(&spitz_amber_led);
- led_classdev_unregister(&spitz_green_led);
-
- return 0;
-}
-
-static struct platform_driver spitzled_driver = {
- .probe = spitzled_probe,
- .remove = spitzled_remove,
-#ifdef CONFIG_PM
- .suspend = spitzled_suspend,
- .resume = spitzled_resume,
-#endif
- .driver = {
- .name = "spitz-led",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init spitzled_init(void)
-{
- return platform_driver_register(&spitzled_driver);
-}
-
-static void __exit spitzled_exit(void)
-{
- platform_driver_unregister(&spitzled_driver);
-}
-
-module_init(spitzled_init);
-module_exit(spitzled_exit);
-
-MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
-MODULE_DESCRIPTION("Spitz LED driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:spitz-led");
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 388cf94055d3..cf96b2cc4f1c 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -1025,9 +1025,9 @@ static int pxa_camera_resume(struct soc_camera_device *icd)
struct pxa_camera_dev *pcdev = ici->priv;
int i = 0, ret = 0;
- DRCMR68 = pcdev->dma_chans[0] | DRCMR_MAPVLD;
- DRCMR69 = pcdev->dma_chans[1] | DRCMR_MAPVLD;
- DRCMR70 = pcdev->dma_chans[2] | DRCMR_MAPVLD;
+ DRCMR(68) = pcdev->dma_chans[0] | DRCMR_MAPVLD;
+ DRCMR(69) = pcdev->dma_chans[1] | DRCMR_MAPVLD;
+ DRCMR(70) = pcdev->dma_chans[2] | DRCMR_MAPVLD;
CICR0 = pcdev->save_cicr[i++] & ~CICR0_ENB;
CICR1 = pcdev->save_cicr[i++];
@@ -1171,9 +1171,9 @@ static int pxa_camera_probe(struct platform_device *pdev)
}
dev_dbg(pcdev->dev, "got DMA channel (V) %d\n", pcdev->dma_chans[2]);
- DRCMR68 = pcdev->dma_chans[0] | DRCMR_MAPVLD;
- DRCMR69 = pcdev->dma_chans[1] | DRCMR_MAPVLD;
- DRCMR70 = pcdev->dma_chans[2] | DRCMR_MAPVLD;
+ DRCMR(68) = pcdev->dma_chans[0] | DRCMR_MAPVLD;
+ DRCMR(69) = pcdev->dma_chans[1] | DRCMR_MAPVLD;
+ DRCMR(70) = pcdev->dma_chans[2] | DRCMR_MAPVLD;
/* request irq */
err = request_irq(pcdev->irq, pxa_camera_irq, 0, PXA_CAM_DRV_NAME,
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 10c44d3fe01a..5dba1651f9cc 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -50,6 +50,15 @@ config HTC_PASIC3
HTC Magician devices, respectively. Actual functionality is
handled by the leds-pasic3 and ds1wm drivers.
+config UCB1400_CORE
+ tristate "Philips UCB1400 Core driver"
+ help
+ This enables support for the Philips UCB1400 core functions.
+ The UCB1400 is an AC97 audio codec.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ucb1400_core.
+
config MFD_TMIO
bool
default n
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 03ad239ecef0..6abebe364419 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -22,3 +22,4 @@ obj-$(CONFIG_MCP_UCB1200_TS) += ucb1x00-ts.o
ifeq ($(CONFIG_SA1100_ASSABET),y)
obj-$(CONFIG_MCP_UCB1200) += ucb1x00-assabet.o
endif
+obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o
diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c
new file mode 100644
index 000000000000..178159e264ce
--- /dev/null
+++ b/drivers/mfd/ucb1400_core.c
@@ -0,0 +1,106 @@
+/*
+ * Core functions for:
+ * Philips UCB1400 multifunction chip
+ *
+ * Based on ucb1400_ts.c:
+ * Author: Nicolas Pitre
+ * Created: September 25, 2006
+ * Copyright: MontaVista Software, Inc.
+ *
+ * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
+ * If something doesnt work and it worked before spliting, e-mail me,
+ * dont bother Nicolas please ;-)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code is heavily based on ucb1x00-*.c copyrighted by Russell King
+ * covering the UCB1100, UCB1200 and UCB1300.. Support for the UCB1400 has
+ * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request.
+ */
+
+#include <linux/module.h>
+#include <linux/ucb1400.h>
+
+static int ucb1400_core_probe(struct device *dev)
+{
+ int err;
+ struct ucb1400 *ucb;
+ struct ucb1400_ts ucb_ts;
+ struct snd_ac97 *ac97;
+
+ memset(&ucb_ts, 0, sizeof(ucb_ts));
+
+ ucb = kzalloc(sizeof(struct ucb1400), GFP_KERNEL);
+ if (!ucb) {
+ err = -ENOMEM;
+ goto err;
+ }
+
+ dev_set_drvdata(dev, ucb);
+
+ ac97 = to_ac97_t(dev);
+
+ ucb_ts.id = ucb1400_reg_read(ac97, UCB_ID);
+ if (ucb_ts.id != UCB_ID_1400) {
+ err = -ENODEV;
+ goto err0;
+ }
+
+ /* TOUCHSCREEN */
+ ucb_ts.ac97 = ac97;
+ ucb->ucb1400_ts = platform_device_alloc("ucb1400_ts", -1);
+ if (!ucb->ucb1400_ts) {
+ err = -ENOMEM;
+ goto err0;
+ }
+ err = platform_device_add_data(ucb->ucb1400_ts, &ucb_ts,
+ sizeof(ucb_ts));
+ if (err)
+ goto err1;
+ err = platform_device_add(ucb->ucb1400_ts);
+ if (err)
+ goto err1;
+
+ return 0;
+
+err1:
+ platform_device_put(ucb->ucb1400_ts);
+err0:
+ kfree(ucb);
+err:
+ return err;
+}
+
+static int ucb1400_core_remove(struct device *dev)
+{
+ struct ucb1400 *ucb = dev_get_drvdata(dev);
+
+ platform_device_unregister(ucb->ucb1400_ts);
+ kfree(ucb);
+ return 0;
+}
+
+static struct device_driver ucb1400_core_driver = {
+ .name = "ucb1400_core",
+ .bus = &ac97_bus_type,
+ .probe = ucb1400_core_probe,
+ .remove = ucb1400_core_remove,
+};
+
+static int __init ucb1400_core_init(void)
+{
+ return driver_register(&ucb1400_core_driver);
+}
+
+static void __exit ucb1400_core_exit(void)
+{
+ driver_unregister(&ucb1400_core_driver);
+}
+
+module_init(ucb1400_core_init);
+module_exit(ucb1400_core_exit);
+
+MODULE_DESCRIPTION("Philips UCB1400 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 55093ad132ca..ebfaa9960939 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -520,7 +520,7 @@ static int pxamci_probe(struct platform_device *pdev)
/*
* Block length register is only 10 bits before PXA27x.
*/
- mmc->max_blk_size = (cpu_is_pxa21x() || cpu_is_pxa25x()) ? 1023 : 2048;
+ mmc->max_blk_size = cpu_is_pxa25x() ? 1023 : 2048;
/*
* Block count register is 16 bits.
@@ -554,7 +554,7 @@ static int pxamci_probe(struct platform_device *pdev)
MMC_VDD_32_33|MMC_VDD_33_34;
mmc->caps = 0;
host->cmdat = 0;
- if (!cpu_is_pxa21x() && !cpu_is_pxa25x()) {
+ if (!cpu_is_pxa25x()) {
mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
host->cmdat |= CMDAT_SDIO_INT_EN;
if (cpu_is_pxa300() || cpu_is_pxa310())
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index 9eba3f04783a..fa129c09bca8 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -156,7 +156,7 @@ static int cmx270_init(void)
int mtd_parts_nb = 0;
int ret;
- if (!machine_is_armcore())
+ if (!(machine_is_armcore() && cpu_is_pxa27x()))
return -ENODEV;
ret = gpio_request(GPIO_NAND_CS, "NAND CS");
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index 4aa61a1a3d55..c5b02b66f756 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -572,8 +572,8 @@ static void pxa_irda_startup(struct pxa_irda *si)
ICCR2 = ICCR2_TXP | ICCR2_TRIG_32;
/* configure DMAC */
- DRCMR17 = si->rxdma | DRCMR_MAPVLD;
- DRCMR18 = si->txdma | DRCMR_MAPVLD;
+ DRCMR(17) = si->rxdma | DRCMR_MAPVLD;
+ DRCMR(18) = si->txdma | DRCMR_MAPVLD;
/* force SIR reinitialization */
si->speed = 4000000;
@@ -602,8 +602,8 @@ static void pxa_irda_shutdown(struct pxa_irda *si)
/* disable the STUART or FICP clocks */
pxa_irda_disable_clk(si);
- DRCMR17 = 0;
- DRCMR18 = 0;
+ DRCMR(17) = 0;
+ DRCMR(18) = 0;
local_irq_restore(flags);
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 8322e7f37af5..160873f0a817 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -43,7 +43,8 @@
#if defined(CONFIG_ARCH_LUBBOCK) ||\
defined(CONFIG_MACH_MAINSTONE) ||\
defined(CONFIG_MACH_ZYLONITE) ||\
- defined(CONFIG_MACH_LITTLETON)
+ defined(CONFIG_MACH_LITTLETON) ||\
+ defined(CONFIG_ARCH_VIPER)
#include <asm/mach-types.h>
@@ -778,14 +779,6 @@ smc_pxa_dma_irq(int dma, void *dummy)
#define RPC_ANEG 0x0800 // When 1 PHY is in Auto-Negotiate Mode
#define RPC_LSXA_SHFT 5 // Bits to shift LS2A,LS1A,LS0A to lsb
#define RPC_LSXB_SHFT 2 // Bits to get LS2B,LS1B,LS0B to lsb
-#define RPC_LED_100_10 (0x00) // LED = 100Mbps OR's with 10Mbps link detect
-#define RPC_LED_RES (0x01) // LED = Reserved
-#define RPC_LED_10 (0x02) // LED = 10Mbps link detect
-#define RPC_LED_FD (0x03) // LED = Full Duplex Mode
-#define RPC_LED_TX_RX (0x04) // LED = TX or RX packet occurred
-#define RPC_LED_100 (0x05) // LED = 100Mbps link dectect
-#define RPC_LED_TX (0x06) // LED = TX packet occurred
-#define RPC_LED_RX (0x07) // LED = RX packet occurred
#ifndef RPC_LSA_DEFAULT
#define RPC_LSA_DEFAULT RPC_LED_100
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index e0f884034c9f..f57eeae3830a 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -220,7 +220,8 @@ config PCMCIA_PXA2XX
tristate "PXA2xx support"
depends on ARM && ARCH_PXA && PCMCIA
depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
- || MACH_ARMCORE || ARCH_PXA_PALM)
+ || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
+ || ARCH_VIPER)
help
Say Y here to include support for the PXA2xx PCMCIA controller
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 269a9e913ba2..a87902de8d3b 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o
obj-$(CONFIG_HD64465_PCMCIA) += hd64465_ss.o
obj-$(CONFIG_PCMCIA_SA1100) += sa11xx_core.o sa1100_cs.o
obj-$(CONFIG_PCMCIA_SA1111) += sa11xx_core.o sa1111_cs.o
-obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_core.o pxa2xx_cs.o
obj-$(CONFIG_M32R_PCC) += m32r_pcc.o
obj-$(CONFIG_M32R_CFC) += m32r_cfc.o
obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o
@@ -68,9 +67,14 @@ sa1100_cs-$(CONFIG_SA1100_H3600) += sa1100_h3600.o
sa1100_cs-$(CONFIG_SA1100_SHANNON) += sa1100_shannon.o
sa1100_cs-$(CONFIG_SA1100_SIMPAD) += sa1100_simpad.o
-pxa2xx_cs-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock.o sa1111_generic.o
-pxa2xx_cs-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o
-pxa2xx_cs-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o
-pxa2xx_cs-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x270.o
-pxa2xx_cs-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o
+pxa2xx_lubbock_cs-y += pxa2xx_lubbock.o sa1111_generic.o
+pxa2xx-obj-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock_cs.o
+pxa2xx-obj-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o
+pxa2xx-obj-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o
+pxa2xx-obj-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x2xx.o pxa2xx_cm_x255.o pxa2xx_cm_x270.o
+pxa2xx-obj-$(CONFIG_ARCH_VIPER) += pxa2xx_viper.o
+pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps.o
+pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o
+pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o
+obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_core.o $(pxa2xx-obj-y)
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index 1b07af5a2ed3..13f1e0fd3f31 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -30,6 +30,7 @@
#include <asm/system.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
+#include <asm/mach-types.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/ss.h>
@@ -166,18 +167,32 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
}
#endif
+static void pxa2xx_configure_sockets(struct device *dev)
+{
+ struct pcmcia_low_level *ops = dev->platform_data;
+
+ /*
+ * We have at least one socket, so set MECR:CIT
+ * (Card Is There)
+ */
+ MECR |= MECR_CIT;
+
+ /* Set MECR:NOS (Number Of Sockets) */
+ if (ops->nr > 1 || machine_is_viper())
+ MECR |= MECR_NOS;
+ else
+ MECR &= ~MECR_NOS;
+}
+
int __pxa2xx_drv_pcmcia_probe(struct device *dev)
{
int ret;
struct pcmcia_low_level *ops;
- int first, nr;
if (!dev || !dev->platform_data)
return -ENODEV;
ops = (struct pcmcia_low_level *)dev->platform_data;
- first = ops->first;
- nr = ops->nr;
/* Provide our PXA2xx specific timing routines. */
ops->set_timing = pxa2xx_pcmcia_set_timing;
@@ -185,21 +200,10 @@ int __pxa2xx_drv_pcmcia_probe(struct device *dev)
ops->frequency_change = pxa2xx_pcmcia_frequency_change;
#endif
- ret = soc_common_drv_pcmcia_probe(dev, ops, first, nr);
+ ret = soc_common_drv_pcmcia_probe(dev, ops, ops->first, ops->nr);
- if (ret == 0) {
- /*
- * We have at least one socket, so set MECR:CIT
- * (Card Is There)
- */
- MECR |= MECR_CIT;
-
- /* Set MECR:NOS (Number Of Sockets) */
- if (nr > 1)
- MECR |= MECR_NOS;
- else
- MECR &= ~MECR_NOS;
- }
+ if (!ret)
+ pxa2xx_configure_sockets(dev);
return ret;
}
@@ -223,11 +227,7 @@ static int pxa2xx_drv_pcmcia_suspend(struct platform_device *dev, pm_message_t s
static int pxa2xx_drv_pcmcia_resume(struct platform_device *dev)
{
- struct pcmcia_low_level *ops = dev->dev.platform_data;
- int nr = ops ? ops->nr : 0;
-
- MECR = nr > 1 ? MECR_CIT | MECR_NOS : (nr > 0 ? MECR_CIT : 0);
-
+ pxa2xx_configure_sockets(&dev->dev);
return pcmcia_socket_dev_resume(&dev->dev);
}
diff --git a/drivers/pcmcia/pxa2xx_cm_x255.c b/drivers/pcmcia/pxa2xx_cm_x255.c
new file mode 100644
index 000000000000..7c8bcb476622
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_cm_x255.c
@@ -0,0 +1,154 @@
+/*
+ * linux/drivers/pcmcia/pxa/pxa_cm_x255.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Compulab Ltd., 2003, 2007, 2008
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <mach/pxa-regs.h>
+
+#include "soc_common.h"
+
+#define GPIO_PCMCIA_SKTSEL (54)
+#define GPIO_PCMCIA_S0_CD_VALID (16)
+#define GPIO_PCMCIA_S1_CD_VALID (17)
+#define GPIO_PCMCIA_S0_RDYINT (6)
+#define GPIO_PCMCIA_S1_RDYINT (8)
+#define GPIO_PCMCIA_RESET (9)
+
+#define PCMCIA_S0_CD_VALID IRQ_GPIO(GPIO_PCMCIA_S0_CD_VALID)
+#define PCMCIA_S1_CD_VALID IRQ_GPIO(GPIO_PCMCIA_S1_CD_VALID)
+#define PCMCIA_S0_RDYINT IRQ_GPIO(GPIO_PCMCIA_S0_RDYINT)
+#define PCMCIA_S1_RDYINT IRQ_GPIO(GPIO_PCMCIA_S1_RDYINT)
+
+
+static struct pcmcia_irqs irqs[] = {
+ { 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
+ { 1, PCMCIA_S1_CD_VALID, "PCMCIA1 CD" },
+};
+
+static int cmx255_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ int ret = gpio_request(GPIO_PCMCIA_RESET, "PCCard reset");
+ if (ret)
+ return ret;
+ gpio_direction_output(GPIO_PCMCIA_RESET, 0);
+
+ skt->irq = skt->nr == 0 ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
+ ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ if (!ret)
+ gpio_free(GPIO_PCMCIA_RESET);
+
+ return ret;
+}
+
+static void cmx255_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
+{
+ soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ gpio_free(GPIO_PCMCIA_RESET);
+}
+
+
+static void cmx255_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+ int cd = skt->nr ? GPIO_PCMCIA_S1_CD_VALID : GPIO_PCMCIA_S0_CD_VALID;
+ int rdy = skt->nr ? GPIO_PCMCIA_S0_RDYINT : GPIO_PCMCIA_S1_RDYINT;
+
+ state->detect = !gpio_get_value(cd);
+ state->ready = !!gpio_get_value(rdy);
+ state->bvd1 = 1;
+ state->bvd2 = 1;
+ state->vs_3v = 0;
+ state->vs_Xv = 0;
+ state->wrprot = 0; /* not available */
+}
+
+
+static int cmx255_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ switch (skt->nr) {
+ case 0:
+ if (state->flags & SS_RESET) {
+ gpio_set_value(GPIO_PCMCIA_SKTSEL, 0);
+ udelay(1);
+ gpio_set_value(GPIO_PCMCIA_RESET, 1);
+ udelay(10);
+ gpio_set_value(GPIO_PCMCIA_RESET, 0);
+ }
+ break;
+ case 1:
+ if (state->flags & SS_RESET) {
+ gpio_set_value(GPIO_PCMCIA_SKTSEL, 1);
+ udelay(1);
+ gpio_set_value(GPIO_PCMCIA_RESET, 1);
+ udelay(10);
+ gpio_set_value(GPIO_PCMCIA_RESET, 0);
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static void cmx255_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void cmx255_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+
+static struct pcmcia_low_level cmx255_pcmcia_ops __initdata = {
+ .owner = THIS_MODULE,
+ .hw_init = cmx255_pcmcia_hw_init,
+ .hw_shutdown = cmx255_pcmcia_shutdown,
+ .socket_state = cmx255_pcmcia_socket_state,
+ .configure_socket = cmx255_pcmcia_configure_socket,
+ .socket_init = cmx255_pcmcia_socket_init,
+ .socket_suspend = cmx255_pcmcia_socket_suspend,
+ .nr = 1,
+};
+
+static struct platform_device *cmx255_pcmcia_device;
+
+int __init cmx255_pcmcia_init(void)
+{
+ int ret;
+
+ cmx255_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+
+ if (!cmx255_pcmcia_device)
+ return -ENOMEM;
+
+ ret = platform_device_add_data(cmx255_pcmcia_device, &cmx255_pcmcia_ops,
+ sizeof(cmx255_pcmcia_ops));
+
+ if (ret == 0) {
+ printk(KERN_INFO "Registering cm-x255 PCMCIA interface.\n");
+ ret = platform_device_add(cmx255_pcmcia_device);
+ }
+
+ if (ret)
+ platform_device_put(cmx255_pcmcia_device);
+
+ return ret;
+}
+
+void __exit cmx255_pcmcia_exit(void)
+{
+ platform_device_unregister(cmx255_pcmcia_device);
+}
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index bcff5cfed051..6c3aac377126 100644
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -105,13 +105,10 @@ static struct pcmcia_low_level cmx270_pcmcia_ops __initdata = {
static struct platform_device *cmx270_pcmcia_device;
-static int __init cmx270_pcmcia_init(void)
+int __init cmx270_pcmcia_init(void)
{
int ret;
- if (!machine_is_armcore())
- return -ENODEV;
-
cmx270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
if (!cmx270_pcmcia_device)
@@ -131,14 +128,7 @@ static int __init cmx270_pcmcia_init(void)
return ret;
}
-static void __exit cmx270_pcmcia_exit(void)
+void __exit cmx270_pcmcia_exit(void)
{
platform_device_unregister(cmx270_pcmcia_device);
}
-
-module_init(cmx270_pcmcia_init);
-module_exit(cmx270_pcmcia_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
-MODULE_DESCRIPTION("CM-x270 PCMCIA driver");
diff --git a/drivers/pcmcia/pxa2xx_cm_x2xx.c b/drivers/pcmcia/pxa2xx_cm_x2xx.c
new file mode 100644
index 000000000000..4f09506ad8d4
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_cm_x2xx.c
@@ -0,0 +1,49 @@
+/*
+ * linux/drivers/pcmcia/pxa/pxa_cm_x2xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Compulab Ltd., 2003, 2007, 2008
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <mach/system.h>
+
+int cmx255_pcmcia_init(void);
+int cmx270_pcmcia_init(void);
+void cmx255_pcmcia_exit(void);
+void cmx270_pcmcia_exit(void);
+
+static int __init cmx2xx_pcmcia_init(void)
+{
+ int ret = -ENODEV;
+
+ if (machine_is_armcore() && cpu_is_pxa25x())
+ ret = cmx255_pcmcia_init();
+ else if (machine_is_armcore() && cpu_is_pxa27x())
+ ret = cmx270_pcmcia_init();
+
+ return ret;
+}
+
+static void __exit cmx2xx_pcmcia_exit(void)
+{
+ if (machine_is_armcore() && cpu_is_pxa25x())
+ cmx255_pcmcia_exit();
+ else if (machine_is_armcore() && cpu_is_pxa27x())
+ cmx270_pcmcia_exit();
+}
+
+module_init(cmx2xx_pcmcia_init);
+module_exit(cmx2xx_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
+MODULE_DESCRIPTION("CM-x2xx PCMCIA driver");
diff --git a/drivers/pcmcia/pxa2xx_palmld.c b/drivers/pcmcia/pxa2xx_palmld.c
new file mode 100644
index 000000000000..1736c67e547e
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_palmld.c
@@ -0,0 +1,151 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_palmld.c
+ *
+ * Driver for Palm LifeDrive PCMCIA
+ *
+ * Copyright (C) 2006 Alex Osborne <ato@meshy.org>
+ * Copyright (C) 2007-2008 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <mach/palmld.h>
+#include "soc_common.h"
+
+static int palmld_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_POWER, "PCMCIA PWR");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_output(GPIO_NR_PALMLD_PCMCIA_POWER, 0);
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_RESET, "PCMCIA RST");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMLD_PCMCIA_RESET, 1);
+ if (ret)
+ goto err3;
+
+ ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_READY, "PCMCIA RDY");
+ if (ret)
+ goto err3;
+ ret = gpio_direction_input(GPIO_NR_PALMLD_PCMCIA_READY);
+ if (ret)
+ goto err4;
+
+ skt->irq = IRQ_GPIO(GPIO_NR_PALMLD_PCMCIA_READY);
+ return 0;
+
+err4:
+ gpio_free(GPIO_NR_PALMLD_PCMCIA_READY);
+err3:
+ gpio_free(GPIO_NR_PALMLD_PCMCIA_RESET);
+err2:
+ gpio_free(GPIO_NR_PALMLD_PCMCIA_POWER);
+err1:
+ return ret;
+}
+
+static void palmld_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+ gpio_free(GPIO_NR_PALMLD_PCMCIA_READY);
+ gpio_free(GPIO_NR_PALMLD_PCMCIA_RESET);
+ gpio_free(GPIO_NR_PALMLD_PCMCIA_POWER);
+}
+
+static void palmld_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+ state->detect = 1; /* always inserted */
+ state->ready = !!gpio_get_value(GPIO_NR_PALMLD_PCMCIA_READY);
+ state->bvd1 = 1;
+ state->bvd2 = 1;
+ state->wrprot = 0;
+ state->vs_3v = 1;
+ state->vs_Xv = 0;
+}
+
+static int palmld_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ gpio_set_value(GPIO_NR_PALMLD_PCMCIA_POWER, 1);
+ gpio_set_value(GPIO_NR_PALMLD_PCMCIA_RESET,
+ !!(state->flags & SS_RESET));
+
+ return 0;
+}
+
+static void palmld_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void palmld_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+static struct pcmcia_low_level palmld_pcmcia_ops = {
+ .owner = THIS_MODULE,
+
+ .first = 0,
+ .nr = 2,
+
+ .hw_init = palmld_pcmcia_hw_init,
+ .hw_shutdown = palmld_pcmcia_hw_shutdown,
+
+ .socket_state = palmld_pcmcia_socket_state,
+ .configure_socket = palmld_pcmcia_configure_socket,
+
+ .socket_init = palmld_pcmcia_socket_init,
+ .socket_suspend = palmld_pcmcia_socket_suspend,
+};
+
+static struct platform_device *palmld_pcmcia_device;
+
+static int __init palmld_pcmcia_init(void)
+{
+ int ret;
+
+ if (!machine_is_palmld())
+ return -ENODEV;
+
+ palmld_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+ if (!palmld_pcmcia_device)
+ return -ENOMEM;
+
+ ret = platform_device_add_data(palmld_pcmcia_device, &palmld_pcmcia_ops,
+ sizeof(palmld_pcmcia_ops));
+
+ if (!ret)
+ ret = platform_device_add(palmld_pcmcia_device);
+
+ if (ret)
+ platform_device_put(palmld_pcmcia_device);
+
+ return ret;
+}
+
+static void __exit palmld_pcmcia_exit(void)
+{
+ platform_device_unregister(palmld_pcmcia_device);
+}
+
+module_init(palmld_pcmcia_init);
+module_exit(palmld_pcmcia_exit);
+
+MODULE_AUTHOR("Alex Osborne <ato@meshy.org>,"
+ " Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PCMCIA support for Palm LifeDrive");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/pxa2xx_trizeps4.c b/drivers/pcmcia/pxa2xx_trizeps4.c
new file mode 100644
index 000000000000..36c7a0b324d2
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_trizeps4.c
@@ -0,0 +1,256 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_trizeps4.c
+ *
+ * TRIZEPS PCMCIA specific routines.
+ *
+ * Author: Jürgen Schindele
+ * Created: 20 02, 2006
+ * Copyright: Jürgen Schindele
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/trizeps4.h>
+
+#include "soc_common.h"
+
+extern void board_pcmcia_power(int power);
+
+static struct pcmcia_irqs irqs[] = {
+ { 0, IRQ_GPIO(GPIO_PCD), "cs0_cd" }
+ /* on other baseboards we can have more inputs */
+};
+
+static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ int ret, i;
+ /* we dont have voltage/card/ready detection
+ * so we dont need interrupts for it
+ */
+ switch (skt->nr) {
+ case 0:
+ if (gpio_request(GPIO_PRDY, "cf_irq") < 0) {
+ pr_err("%s: sock %d unable to request gpio %d\n", __func__,
+ skt->nr, GPIO_PRDY);
+ return -EBUSY;
+ }
+ if (gpio_direction_input(GPIO_PRDY) < 0) {
+ pr_err("%s: sock %d unable to set input gpio %d\n", __func__,
+ skt->nr, GPIO_PRDY);
+ gpio_free(GPIO_PRDY);
+ return -EINVAL;
+ }
+ skt->irq = IRQ_GPIO(GPIO_PRDY);
+ break;
+
+#ifndef CONFIG_MACH_TRIZEPS_CONXS
+ case 1:
+#endif
+ default:
+ break;
+ }
+ /* release the reset of this card */
+ pr_debug("%s: sock %d irq %d\n", __func__, skt->nr, skt->irq);
+
+ /* supplementory irqs for the socket */
+ for (i = 0; i < ARRAY_SIZE(irqs); i++) {
+ if (irqs[i].sock != skt->nr)
+ continue;
+ if (gpio_request(IRQ_TO_GPIO(irqs[i].irq), irqs[i].str) < 0) {
+ pr_err("%s: sock %d unable to request gpio %d\n",
+ __func__, skt->nr, IRQ_TO_GPIO(irqs[i].irq));
+ ret = -EBUSY;
+ goto error;
+ }
+ if (gpio_direction_input(IRQ_TO_GPIO(irqs[i].irq)) < 0) {
+ pr_err("%s: sock %d unable to set input gpio %d\n",
+ __func__, skt->nr, IRQ_TO_GPIO(irqs[i].irq));
+ ret = -EINVAL;
+ goto error;
+ }
+ }
+ return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+
+error:
+ for (; i >= 0; i--) {
+ gpio_free(IRQ_TO_GPIO(irqs[i].irq));
+ }
+ return (ret);
+}
+
+static void trizeps_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+ int i;
+ /* free allocated gpio's */
+ gpio_free(GPIO_PRDY);
+ for (i = 0; i < ARRAY_SIZE(irqs); i++)
+ gpio_free(IRQ_TO_GPIO(irqs[i].irq));
+}
+
+static unsigned long trizeps_pcmcia_status[2];
+
+static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+ unsigned short status = 0, change;
+ status = CFSR_readw();
+ change = (status ^ trizeps_pcmcia_status[skt->nr]) &
+ ConXS_CFSR_BVD_MASK;
+ if (change) {
+ trizeps_pcmcia_status[skt->nr] = status;
+ if (status & ConXS_CFSR_BVD1) {
+ /* enable_irq empty */
+ } else {
+ /* disable_irq empty */
+ }
+ }
+
+ switch (skt->nr) {
+ case 0:
+ /* just fill in fix states */
+ state->detect = gpio_get_value(GPIO_PCD) ? 0 : 1;
+ state->ready = gpio_get_value(GPIO_PRDY) ? 1 : 0;
+ state->bvd1 = (status & ConXS_CFSR_BVD1) ? 1 : 0;
+ state->bvd2 = (status & ConXS_CFSR_BVD2) ? 1 : 0;
+ state->vs_3v = (status & ConXS_CFSR_VS1) ? 0 : 1;
+ state->vs_Xv = (status & ConXS_CFSR_VS2) ? 0 : 1;
+ state->wrprot = 0; /* not available */
+ break;
+
+#ifndef CONFIG_MACH_TRIZEPS_CONXS
+ /* on ConXS we only have one slot. Second is inactive */
+ case 1:
+ state->detect = 0;
+ state->ready = 0;
+ state->bvd1 = 0;
+ state->bvd2 = 0;
+ state->vs_3v = 0;
+ state->vs_Xv = 0;
+ state->wrprot = 0;
+ break;
+
+#endif
+ }
+}
+
+static int trizeps_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ int ret = 0;
+ unsigned short power = 0;
+
+ /* we do nothing here just check a bit */
+ switch (state->Vcc) {
+ case 0: power &= 0xfc; break;
+ case 33: power |= ConXS_BCR_S0_VCC_3V3; break;
+ case 50:
+ pr_err("%s(): Vcc 5V not supported in socket\n", __func__);
+ break;
+ default:
+ pr_err("%s(): bad Vcc %u\n", __func__, state->Vcc);
+ ret = -1;
+ }
+
+ switch (state->Vpp) {
+ case 0: power &= 0xf3; break;
+ case 33: power |= ConXS_BCR_S0_VPP_3V3; break;
+ case 120:
+ pr_err("%s(): Vpp 12V not supported in socket\n", __func__);
+ break;
+ default:
+ if (state->Vpp != state->Vcc) {
+ pr_err("%s(): bad Vpp %u\n", __func__, state->Vpp);
+ ret = -1;
+ }
+ }
+
+ switch (skt->nr) {
+ case 0: /* we only have 3.3V */
+ board_pcmcia_power(power);
+ break;
+
+#ifndef CONFIG_MACH_TRIZEPS_CONXS
+ /* on ConXS we only have one slot. Second is inactive */
+ case 1:
+#endif
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+static void trizeps_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+ /* default is on */
+ board_pcmcia_power(0x9);
+}
+
+static void trizeps_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+ board_pcmcia_power(0x0);
+}
+
+static struct pcmcia_low_level trizeps_pcmcia_ops = {
+ .owner = THIS_MODULE,
+ .hw_init = trizeps_pcmcia_hw_init,
+ .hw_shutdown = trizeps_pcmcia_hw_shutdown,
+ .socket_state = trizeps_pcmcia_socket_state,
+ .configure_socket = trizeps_pcmcia_configure_socket,
+ .socket_init = trizeps_pcmcia_socket_init,
+ .socket_suspend = trizeps_pcmcia_socket_suspend,
+#ifdef CONFIG_MACH_TRIZEPS_CONXS
+ .nr = 1,
+#else
+ .nr = 2,
+#endif
+ .first = 0,
+};
+
+static struct platform_device *trizeps_pcmcia_device;
+
+static int __init trizeps_pcmcia_init(void)
+{
+ int ret;
+
+ trizeps_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+ if (!trizeps_pcmcia_device)
+ return -ENOMEM;
+
+ ret = platform_device_add_data(trizeps_pcmcia_device,
+ &trizeps_pcmcia_ops, sizeof(trizeps_pcmcia_ops));
+
+ if (ret == 0)
+ ret = platform_device_add(trizeps_pcmcia_device);
+
+ if (ret)
+ platform_device_put(trizeps_pcmcia_device);
+
+ return ret;
+}
+
+static void __exit trizeps_pcmcia_exit(void)
+{
+ platform_device_unregister(trizeps_pcmcia_device);
+}
+
+fs_initcall(trizeps_pcmcia_init);
+module_exit(trizeps_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Juergen Schindele");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
diff --git a/drivers/pcmcia/pxa2xx_viper.c b/drivers/pcmcia/pxa2xx_viper.c
new file mode 100644
index 000000000000..dd10481be7bf
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_viper.c
@@ -0,0 +1,179 @@
+/*
+ * VIPER PCMCIA support
+ * Copyright 2004 Arcom Control Systems
+ *
+ * Maintained by Marc Zyngier <maz@misterjones.org>
+ * <marc.zyngier@altran.com>
+ *
+ * Based on:
+ * iPAQ h2200 PCMCIA support
+ * Copyright 2004 Koen Kooi <koen@vestingbar.nl>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <pcmcia/ss.h>
+
+#include <asm/irq.h>
+
+#include <mach/pxa-regs.h>
+#include <mach/viper.h>
+#include <asm/mach-types.h>
+
+#include "soc_common.h"
+#include "pxa2xx_base.h"
+
+static struct pcmcia_irqs irqs[] = {
+ { 0, gpio_to_irq(VIPER_CF_CD_GPIO), "PCMCIA_CD" }
+};
+
+static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ unsigned long flags;
+
+ skt->irq = gpio_to_irq(VIPER_CF_RDY_GPIO);
+
+ if (gpio_request(VIPER_CF_CD_GPIO, "CF detect"))
+ goto err_request_cd;
+
+ if (gpio_request(VIPER_CF_RDY_GPIO, "CF ready"))
+ goto err_request_rdy;
+
+ if (gpio_request(VIPER_CF_POWER_GPIO, "CF power"))
+ goto err_request_pwr;
+
+ local_irq_save(flags);
+
+ /* GPIO 82 is the CF power enable line. initially off */
+ if (gpio_direction_output(VIPER_CF_POWER_GPIO, 0) ||
+ gpio_direction_input(VIPER_CF_CD_GPIO) ||
+ gpio_direction_input(VIPER_CF_RDY_GPIO)) {
+ local_irq_restore(flags);
+ goto err_dir;
+ }
+
+ local_irq_restore(flags);
+
+ return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+
+err_dir:
+ gpio_free(VIPER_CF_POWER_GPIO);
+err_request_pwr:
+ gpio_free(VIPER_CF_RDY_GPIO);
+err_request_rdy:
+ gpio_free(VIPER_CF_CD_GPIO);
+err_request_cd:
+ printk(KERN_ERR "viper: Failed to setup PCMCIA GPIOs\n");
+ return -1;
+}
+
+/*
+ * Release all resources.
+ */
+static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+ soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ gpio_free(VIPER_CF_POWER_GPIO);
+ gpio_free(VIPER_CF_RDY_GPIO);
+ gpio_free(VIPER_CF_CD_GPIO);
+}
+
+static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+ state->detect = gpio_get_value(VIPER_CF_CD_GPIO) ? 0 : 1;
+ state->ready = gpio_get_value(VIPER_CF_RDY_GPIO) ? 1 : 0;
+ state->bvd1 = 1;
+ state->bvd2 = 1;
+ state->wrprot = 0;
+ state->vs_3v = 1; /* Can only apply 3.3V */
+ state->vs_Xv = 0;
+}
+
+static int viper_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ /* Silently ignore Vpp, output enable, speaker enable. */
+ viper_cf_rst(state->flags & SS_RESET);
+
+ /* Apply socket voltage */
+ switch (state->Vcc) {
+ case 0:
+ gpio_set_value(VIPER_CF_POWER_GPIO, 0);
+ break;
+ case 33:
+ gpio_set_value(VIPER_CF_POWER_GPIO, 1);
+ break;
+ default:
+ printk(KERN_ERR "%s: Unsupported Vcc:%d\n",
+ __func__, state->Vcc);
+ return -1;
+ }
+
+ return 0;
+}
+
+static void viper_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void viper_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+static struct pcmcia_low_level viper_pcmcia_ops __initdata = {
+ .owner = THIS_MODULE,
+ .hw_init = viper_pcmcia_hw_init,
+ .hw_shutdown = viper_pcmcia_hw_shutdown,
+ .socket_state = viper_pcmcia_socket_state,
+ .configure_socket = viper_pcmcia_configure_socket,
+ .socket_init = viper_pcmcia_socket_init,
+ .socket_suspend = viper_pcmcia_socket_suspend,
+ .nr = 1,
+};
+
+static struct platform_device *viper_pcmcia_device;
+
+static int __init viper_pcmcia_init(void)
+{
+ int ret;
+
+ if (!machine_is_viper())
+ return -ENODEV;
+
+ viper_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+ if (!viper_pcmcia_device)
+ return -ENOMEM;
+
+ ret = platform_device_add_data(viper_pcmcia_device,
+ &viper_pcmcia_ops,
+ sizeof(viper_pcmcia_ops));
+
+ if (!ret)
+ ret = platform_device_add(viper_pcmcia_device);
+
+ if (ret)
+ platform_device_put(viper_pcmcia_device);
+
+ return ret;
+}
+
+static void __exit viper_pcmcia_exit(void)
+{
+ platform_device_unregister(viper_pcmcia_device);
+}
+
+module_init(viper_pcmcia_init);
+module_exit(viper_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 9ce55850271a..1982f8b42782 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -56,10 +56,10 @@ config BATTERY_TOSA
Say Y to enable support for the battery on the Sharp Zaurus
SL-6000 (tosa) models.
-config BATTERY_PALMTX
- tristate "Palm T|X battery"
- depends on MACH_PALMTX
+config BATTERY_WM97XX
+ bool "WM97xx generic battery driver"
+ depends on TOUCHSCREEN_WM97XX
help
- Say Y to enable support for the battery in Palm T|X.
+ Say Y to enable support for battery measured by WM97xx aux port.
endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 4706bf8ff459..4e20026cc45a 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -21,4 +21,4 @@ obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
-obj-$(CONFIG_BATTERY_PALMTX) += palmtx_battery.o
+obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o \ No newline at end of file
diff --git a/drivers/power/palmtx_battery.c b/drivers/power/palmtx_battery.c
deleted file mode 100644
index 7035bfa41c62..000000000000
--- a/drivers/power/palmtx_battery.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * linux/drivers/power/palmtx_battery.c
- *
- * Battery measurement code for Palm T|X Handheld computer
- *
- * based on tosa_battery.c
- *
- * Copyright (C) 2008 Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/power_supply.h>
-#include <linux/wm97xx.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <mach/palmtx.h>
-
-static DEFINE_MUTEX(bat_lock);
-static struct work_struct bat_work;
-struct mutex work_lock;
-int bat_status = POWER_SUPPLY_STATUS_DISCHARGING;
-
-static unsigned long palmtx_read_bat(struct power_supply *bat_ps)
-{
- return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
- WM97XX_AUX_ID3) * 1000 / 414;
-}
-
-static unsigned long palmtx_read_temp(struct power_supply *bat_ps)
-{
- return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
- WM97XX_AUX_ID2);
-}
-
-static int palmtx_bat_get_property(struct power_supply *bat_ps,
- enum power_supply_property psp,
- union power_supply_propval *val)
-{
- switch (psp) {
- case POWER_SUPPLY_PROP_STATUS:
- val->intval = bat_status;
- break;
- case POWER_SUPPLY_PROP_TECHNOLOGY:
- val->intval = POWER_SUPPLY_TECHNOLOGY_LIPO;
- break;
- case POWER_SUPPLY_PROP_VOLTAGE_NOW:
- val->intval = palmtx_read_bat(bat_ps);
- break;
- case POWER_SUPPLY_PROP_VOLTAGE_MAX:
- case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
- val->intval = PALMTX_BAT_MAX_VOLTAGE;
- break;
- case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
- val->intval = PALMTX_BAT_MIN_VOLTAGE;
- break;
- case POWER_SUPPLY_PROP_TEMP:
- val->intval = palmtx_read_temp(bat_ps);
- break;
- case POWER_SUPPLY_PROP_PRESENT:
- val->intval = 1;
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-static void palmtx_bat_external_power_changed(struct power_supply *bat_ps)
-{
- schedule_work(&bat_work);
-}
-
-static char *status_text[] = {
- [POWER_SUPPLY_STATUS_UNKNOWN] = "Unknown",
- [POWER_SUPPLY_STATUS_CHARGING] = "Charging",
- [POWER_SUPPLY_STATUS_DISCHARGING] = "Discharging",
-};
-
-static void palmtx_bat_update(struct power_supply *bat_ps)
-{
- int old_status = bat_status;
-
- mutex_lock(&work_lock);
-
- bat_status = gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT) ?
- POWER_SUPPLY_STATUS_CHARGING :
- POWER_SUPPLY_STATUS_DISCHARGING;
-
- if (old_status != bat_status) {
- pr_debug("%s %s -> %s\n", bat_ps->name,
- status_text[old_status],
- status_text[bat_status]);
- power_supply_changed(bat_ps);
- }
-
- mutex_unlock(&work_lock);
-}
-
-static enum power_supply_property palmtx_bat_main_props[] = {
- POWER_SUPPLY_PROP_STATUS,
- POWER_SUPPLY_PROP_TECHNOLOGY,
- POWER_SUPPLY_PROP_VOLTAGE_NOW,
- POWER_SUPPLY_PROP_VOLTAGE_MAX,
- POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
- POWER_SUPPLY_PROP_TEMP,
- POWER_SUPPLY_PROP_PRESENT,
-};
-
-struct power_supply bat_ps = {
- .name = "main-battery",
- .type = POWER_SUPPLY_TYPE_BATTERY,
- .properties = palmtx_bat_main_props,
- .num_properties = ARRAY_SIZE(palmtx_bat_main_props),
- .get_property = palmtx_bat_get_property,
- .external_power_changed = palmtx_bat_external_power_changed,
- .use_for_apm = 1,
-};
-
-static void palmtx_bat_work(struct work_struct *work)
-{
- palmtx_bat_update(&bat_ps);
-}
-
-#ifdef CONFIG_PM
-static int palmtx_bat_suspend(struct platform_device *dev, pm_message_t state)
-{
- flush_scheduled_work();
- return 0;
-}
-
-static int palmtx_bat_resume(struct platform_device *dev)
-{
- schedule_work(&bat_work);
- return 0;
-}
-#else
-#define palmtx_bat_suspend NULL
-#define palmtx_bat_resume NULL
-#endif
-
-static int __devinit palmtx_bat_probe(struct platform_device *dev)
-{
- int ret = 0;
-
- if (!machine_is_palmtx())
- return -ENODEV;
-
- mutex_init(&work_lock);
-
- INIT_WORK(&bat_work, palmtx_bat_work);
-
- ret = power_supply_register(&dev->dev, &bat_ps);
- if (!ret)
- schedule_work(&bat_work);
-
- return ret;
-}
-
-static int __devexit palmtx_bat_remove(struct platform_device *dev)
-{
- power_supply_unregister(&bat_ps);
- return 0;
-}
-
-static struct platform_driver palmtx_bat_driver = {
- .driver.name = "wm97xx-battery",
- .driver.owner = THIS_MODULE,
- .probe = palmtx_bat_probe,
- .remove = __devexit_p(palmtx_bat_remove),
- .suspend = palmtx_bat_suspend,
- .resume = palmtx_bat_resume,
-};
-
-static int __init palmtx_bat_init(void)
-{
- return platform_driver_register(&palmtx_bat_driver);
-}
-
-static void __exit palmtx_bat_exit(void)
-{
- platform_driver_unregister(&palmtx_bat_driver);
-}
-
-module_init(palmtx_bat_init);
-module_exit(palmtx_bat_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("Palm T|X battery driver");
diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c
new file mode 100644
index 000000000000..8bde92126d34
--- /dev/null
+++ b/drivers/power/wm97xx_battery.c
@@ -0,0 +1,272 @@
+/*
+ * linux/drivers/power/wm97xx_battery.c
+ *
+ * Battery measurement code for WM97xx
+ *
+ * based on tosa_battery.c
+ *
+ * Copyright (C) 2008 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+
+static DEFINE_MUTEX(bat_lock);
+static struct work_struct bat_work;
+struct mutex work_lock;
+static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN;
+static struct wm97xx_batt_info *pdata;
+static enum power_supply_property *prop;
+
+static unsigned long wm97xx_read_bat(struct power_supply *bat_ps)
+{
+ return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
+ pdata->batt_aux) * pdata->batt_mult /
+ pdata->batt_div;
+}
+
+static unsigned long wm97xx_read_temp(struct power_supply *bat_ps)
+{
+ return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
+ pdata->temp_aux) * pdata->temp_mult /
+ pdata->temp_div;
+}
+
+static int wm97xx_bat_get_property(struct power_supply *bat_ps,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = bat_status;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = pdata->batt_tech;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (pdata->batt_aux >= 0)
+ val->intval = wm97xx_read_bat(bat_ps);
+ else
+ return -EINVAL;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ if (pdata->temp_aux >= 0)
+ val->intval = wm97xx_read_temp(bat_ps);
+ else
+ return -EINVAL;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ if (pdata->max_voltage >= 0)
+ val->intval = pdata->max_voltage;
+ else
+ return -EINVAL;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ if (pdata->min_voltage >= 0)
+ val->intval = pdata->min_voltage;
+ else
+ return -EINVAL;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void wm97xx_bat_external_power_changed(struct power_supply *bat_ps)
+{
+ schedule_work(&bat_work);
+}
+
+static void wm97xx_bat_update(struct power_supply *bat_ps)
+{
+ int old_status = bat_status;
+
+ mutex_lock(&work_lock);
+
+ bat_status = (pdata->charge_gpio >= 0) ?
+ (gpio_get_value(pdata->charge_gpio) ?
+ POWER_SUPPLY_STATUS_DISCHARGING :
+ POWER_SUPPLY_STATUS_CHARGING) :
+ POWER_SUPPLY_STATUS_UNKNOWN;
+
+ if (old_status != bat_status) {
+ pr_debug("%s: %i -> %i\n", bat_ps->name, old_status,
+ bat_status);
+ power_supply_changed(bat_ps);
+ }
+
+ mutex_unlock(&work_lock);
+}
+
+static struct power_supply bat_ps = {
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .get_property = wm97xx_bat_get_property,
+ .external_power_changed = wm97xx_bat_external_power_changed,
+ .use_for_apm = 1,
+};
+
+static void wm97xx_bat_work(struct work_struct *work)
+{
+ wm97xx_bat_update(&bat_ps);
+}
+
+#ifdef CONFIG_PM
+static int wm97xx_bat_suspend(struct platform_device *dev, pm_message_t state)
+{
+ flush_scheduled_work();
+ return 0;
+}
+
+static int wm97xx_bat_resume(struct platform_device *dev)
+{
+ schedule_work(&bat_work);
+ return 0;
+}
+#else
+#define wm97xx_bat_suspend NULL
+#define wm97xx_bat_resume NULL
+#endif
+
+static int __devinit wm97xx_bat_probe(struct platform_device *dev)
+{
+ int ret = 0;
+ int props = 1; /* POWER_SUPPLY_PROP_PRESENT */
+ int i = 0;
+
+ if (dev->id != -1)
+ return -EINVAL;
+
+ mutex_init(&work_lock);
+
+ if (!pdata) {
+ dev_err(&dev->dev, "Please use wm97xx_bat_set_pdata\n");
+ return -EINVAL;
+ }
+
+ if (pdata->charge_gpio >= 0 && gpio_is_valid(pdata->charge_gpio)) {
+ ret = gpio_request(pdata->charge_gpio, "BATT CHRG");
+ if (ret)
+ goto err;
+ ret = gpio_direction_input(pdata->charge_gpio);
+ if (ret)
+ goto err2;
+ props++; /* POWER_SUPPLY_PROP_STATUS */
+ }
+
+ if (pdata->batt_tech >= 0)
+ props++; /* POWER_SUPPLY_PROP_TECHNOLOGY */
+ if (pdata->temp_aux >= 0)
+ props++; /* POWER_SUPPLY_PROP_TEMP */
+ if (pdata->batt_aux >= 0)
+ props++; /* POWER_SUPPLY_PROP_VOLTAGE_NOW */
+ if (pdata->max_voltage >= 0)
+ props++; /* POWER_SUPPLY_PROP_VOLTAGE_MAX */
+ if (pdata->min_voltage >= 0)
+ props++; /* POWER_SUPPLY_PROP_VOLTAGE_MIN */
+
+ prop = kzalloc(props * sizeof(*prop), GFP_KERNEL);
+ if (!prop)
+ goto err2;
+
+ prop[i++] = POWER_SUPPLY_PROP_PRESENT;
+ if (pdata->charge_gpio >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_STATUS;
+ if (pdata->batt_tech >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_TECHNOLOGY;
+ if (pdata->temp_aux >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_TEMP;
+ if (pdata->batt_aux >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_NOW;
+ if (pdata->max_voltage >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MAX;
+ if (pdata->min_voltage >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MIN;
+
+ INIT_WORK(&bat_work, wm97xx_bat_work);
+
+ if (!pdata->batt_name) {
+ dev_info(&dev->dev, "Please consider setting proper battery "
+ "name in platform definition file, falling "
+ "back to name \"wm97xx-batt\"\n");
+ bat_ps.name = "wm97xx-batt";
+ } else
+ bat_ps.name = pdata->batt_name;
+
+ bat_ps.properties = prop;
+ bat_ps.num_properties = props;
+
+ ret = power_supply_register(&dev->dev, &bat_ps);
+ if (!ret)
+ schedule_work(&bat_work);
+ else
+ goto err3;
+
+ return 0;
+err3:
+ kfree(prop);
+err2:
+ gpio_free(pdata->charge_gpio);
+err:
+ return ret;
+}
+
+static int __devexit wm97xx_bat_remove(struct platform_device *dev)
+{
+ if (pdata && pdata->charge_gpio && pdata->charge_gpio >= 0)
+ gpio_free(pdata->charge_gpio);
+ flush_scheduled_work();
+ power_supply_unregister(&bat_ps);
+ kfree(prop);
+ return 0;
+}
+
+static struct platform_driver wm97xx_bat_driver = {
+ .driver = {
+ .name = "wm97xx-battery",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm97xx_bat_probe,
+ .remove = __devexit_p(wm97xx_bat_remove),
+ .suspend = wm97xx_bat_suspend,
+ .resume = wm97xx_bat_resume,
+};
+
+static int __init wm97xx_bat_init(void)
+{
+ return platform_driver_register(&wm97xx_bat_driver);
+}
+
+static void __exit wm97xx_bat_exit(void)
+{
+ platform_driver_unregister(&wm97xx_bat_driver);
+}
+
+void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data)
+{
+ pdata = data;
+}
+EXPORT_SYMBOL_GPL(wm97xx_bat_set_pdata);
+
+module_init(wm97xx_bat_init);
+module_exit(wm97xx_bat_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("WM97xx battery driver");
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index f7a0d37c4221..abc00be55433 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -534,6 +534,11 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
serial_out(up, UART_IER, up->ier);
+ if (termios->c_cflag & CRTSCTS)
+ up->mcr |= UART_MCR_AFE;
+ else
+ up->mcr &= ~UART_MCR_AFE;
+
serial_out(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 7f0f35c78185..e294d430733b 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -23,17 +23,90 @@
#include <linux/signal.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
-
-#include <mach/hardware.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxa2xx-regs.h> /* FIXME: for PSSR */
#include <mach/ohci.h>
+/*
+ * UHC: USB Host Controller (OHCI-like) register definitions
+ */
+#define UHCREV (0x0000) /* UHC HCI Spec Revision */
+#define UHCHCON (0x0004) /* UHC Host Control Register */
+#define UHCCOMS (0x0008) /* UHC Command Status Register */
+#define UHCINTS (0x000C) /* UHC Interrupt Status Register */
+#define UHCINTE (0x0010) /* UHC Interrupt Enable */
+#define UHCINTD (0x0014) /* UHC Interrupt Disable */
+#define UHCHCCA (0x0018) /* UHC Host Controller Comm. Area */
+#define UHCPCED (0x001C) /* UHC Period Current Endpt Descr */
+#define UHCCHED (0x0020) /* UHC Control Head Endpt Descr */
+#define UHCCCED (0x0024) /* UHC Control Current Endpt Descr */
+#define UHCBHED (0x0028) /* UHC Bulk Head Endpt Descr */
+#define UHCBCED (0x002C) /* UHC Bulk Current Endpt Descr */
+#define UHCDHEAD (0x0030) /* UHC Done Head */
+#define UHCFMI (0x0034) /* UHC Frame Interval */
+#define UHCFMR (0x0038) /* UHC Frame Remaining */
+#define UHCFMN (0x003C) /* UHC Frame Number */
+#define UHCPERS (0x0040) /* UHC Periodic Start */
+#define UHCLS (0x0044) /* UHC Low Speed Threshold */
+
+#define UHCRHDA (0x0048) /* UHC Root Hub Descriptor A */
+#define UHCRHDA_NOCP (1 << 12) /* No over current protection */
+#define UHCRHDA_OCPM (1 << 11) /* Over Current Protection Mode */
+#define UHCRHDA_POTPGT(x) \
+ (((x) & 0xff) << 24) /* Power On To Power Good Time */
+
+#define UHCRHDB (0x004C) /* UHC Root Hub Descriptor B */
+#define UHCRHS (0x0050) /* UHC Root Hub Status */
+#define UHCRHPS1 (0x0054) /* UHC Root Hub Port 1 Status */
+#define UHCRHPS2 (0x0058) /* UHC Root Hub Port 2 Status */
+#define UHCRHPS3 (0x005C) /* UHC Root Hub Port 3 Status */
+
+#define UHCSTAT (0x0060) /* UHC Status Register */
+#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */
+#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/
+#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/
+#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */
+#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */
+#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */
+#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */
+#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */
+#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */
+
+#define UHCHR (0x0064) /* UHC Reset Register */
+#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */
+#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */
+#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */
+#define UHCHR_PCPL (1 << 7) /* Power control polarity low */
+#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */
+#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */
+#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */
+#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */
+#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */
+#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */
+#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */
+
+#define UHCHIE (0x0068) /* UHC Interrupt Enable Register*/
+#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */
+#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */
+#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */
+#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */
+#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort
+ Interrupt Enable*/
+#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */
+#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */
+
+#define UHCHIT (0x006C) /* UHC Interrupt Test register */
+
#define PXA_UHC_MAX_PORTNUM 3
-#define UHCRHPS(x) __REG2( 0x4C000050, (x)<<2 )
+struct pxa27x_ohci {
+ /* must be 1st member here for hcd_to_ohci() to work */
+ struct ohci_hcd ohci;
+
+ struct device *dev;
+ struct clk *clk;
+ void __iomem *mmio_base;
+};
-static struct clk *usb_clk;
+#define to_pxa27x_ohci(hcd) (struct pxa27x_ohci *)hcd_to_ohci(hcd)
/*
PMM_NPS_MODE -- PMM Non-power switching mode
@@ -45,30 +118,35 @@ static struct clk *usb_clk;
PMM_PERPORT_MODE -- PMM per port switching mode
Ports are powered individually.
*/
-static int pxa27x_ohci_select_pmm( int mode )
+static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *ohci, int mode)
{
- switch ( mode ) {
+ uint32_t uhcrhda = __raw_readl(ohci->mmio_base + UHCRHDA);
+ uint32_t uhcrhdb = __raw_readl(ohci->mmio_base + UHCRHDB);
+
+ switch (mode) {
case PMM_NPS_MODE:
- UHCRHDA |= RH_A_NPS;
+ uhcrhda |= RH_A_NPS;
break;
case PMM_GLOBAL_MODE:
- UHCRHDA &= ~(RH_A_NPS & RH_A_PSM);
+ uhcrhda &= ~(RH_A_NPS & RH_A_PSM);
break;
case PMM_PERPORT_MODE:
- UHCRHDA &= ~(RH_A_NPS);
- UHCRHDA |= RH_A_PSM;
+ uhcrhda &= ~(RH_A_NPS);
+ uhcrhda |= RH_A_PSM;
/* Set port power control mask bits, only 3 ports. */
- UHCRHDB |= (0x7<<17);
+ uhcrhdb |= (0x7<<17);
break;
default:
printk( KERN_ERR
"Invalid mode %d, set to non-power switch mode.\n",
mode );
- UHCRHDA |= RH_A_NPS;
+ uhcrhda |= RH_A_NPS;
}
+ __raw_writel(uhcrhda, ohci->mmio_base + UHCRHDA);
+ __raw_writel(uhcrhdb, ohci->mmio_base + UHCRHDB);
return 0;
}
@@ -76,57 +154,110 @@ extern int usb_disabled(void);
/*-------------------------------------------------------------------------*/
-static int pxa27x_start_hc(struct device *dev)
+static inline void pxa27x_setup_hc(struct pxa27x_ohci *ohci,
+ struct pxaohci_platform_data *inf)
+{
+ uint32_t uhchr = __raw_readl(ohci->mmio_base + UHCHR);
+ uint32_t uhcrhda = __raw_readl(ohci->mmio_base + UHCRHDA);
+
+ if (inf->flags & ENABLE_PORT1)
+ uhchr &= ~UHCHR_SSEP1;
+
+ if (inf->flags & ENABLE_PORT2)
+ uhchr &= ~UHCHR_SSEP2;
+
+ if (inf->flags & ENABLE_PORT3)
+ uhchr &= ~UHCHR_SSEP3;
+
+ if (inf->flags & POWER_CONTROL_LOW)
+ uhchr |= UHCHR_PCPL;
+
+ if (inf->flags & POWER_SENSE_LOW)
+ uhchr |= UHCHR_PSPL;
+
+ if (inf->flags & NO_OC_PROTECTION)
+ uhcrhda |= UHCRHDA_NOCP;
+
+ if (inf->flags & OC_MODE_PERPORT)
+ uhcrhda |= UHCRHDA_OCPM;
+
+ if (inf->power_on_delay) {
+ uhcrhda &= ~UHCRHDA_POTPGT(0xff);
+ uhcrhda |= UHCRHDA_POTPGT(inf->power_on_delay / 2);
+ }
+
+ __raw_writel(uhchr, ohci->mmio_base + UHCHR);
+ __raw_writel(uhcrhda, ohci->mmio_base + UHCRHDA);
+}
+
+static inline void pxa27x_reset_hc(struct pxa27x_ohci *ohci)
+{
+ uint32_t uhchr = __raw_readl(ohci->mmio_base + UHCHR);
+
+ __raw_writel(uhchr | UHCHR_FHR, ohci->mmio_base + UHCHR);
+ udelay(11);
+ __raw_writel(uhchr & ~UHCHR_FHR, ohci->mmio_base + UHCHR);
+}
+
+#ifdef CONFIG_CPU_PXA27x
+extern void pxa27x_clear_otgph(void);
+#else
+#define pxa27x_clear_otgph() do {} while (0)
+#endif
+
+static int pxa27x_start_hc(struct pxa27x_ohci *ohci, struct device *dev)
{
int retval = 0;
struct pxaohci_platform_data *inf;
+ uint32_t uhchr;
inf = dev->platform_data;
- clk_enable(usb_clk);
+ clk_enable(ohci->clk);
- UHCHR |= UHCHR_FHR;
- udelay(11);
- UHCHR &= ~UHCHR_FHR;
+ pxa27x_reset_hc(ohci);
+
+ uhchr = __raw_readl(ohci->mmio_base + UHCHR) | UHCHR_FSBIR;
+ __raw_writel(uhchr, ohci->mmio_base + UHCHR);
- UHCHR |= UHCHR_FSBIR;
- while (UHCHR & UHCHR_FSBIR)
+ while (__raw_readl(ohci->mmio_base + UHCHR) & UHCHR_FSBIR)
cpu_relax();
+ pxa27x_setup_hc(ohci, inf);
+
if (inf->init)
retval = inf->init(dev);
if (retval < 0)
return retval;
- UHCHR &= ~UHCHR_SSE;
-
- UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE);
+ uhchr = __raw_readl(ohci->mmio_base + UHCHR) & ~UHCHR_SSE;
+ __raw_writel(uhchr, ohci->mmio_base + UHCHR);
+ __raw_writel(UHCHIE_UPRIE | UHCHIE_RWIE, ohci->mmio_base + UHCHIE);
/* Clear any OTG Pin Hold */
- if (cpu_is_pxa27x() && (PSSR & PSSR_OTGPH))
- PSSR |= PSSR_OTGPH;
-
+ pxa27x_clear_otgph();
return 0;
}
-static void pxa27x_stop_hc(struct device *dev)
+static void pxa27x_stop_hc(struct pxa27x_ohci *ohci, struct device *dev)
{
struct pxaohci_platform_data *inf;
+ uint32_t uhccoms;
inf = dev->platform_data;
if (inf->exit)
inf->exit(dev);
- UHCHR |= UHCHR_FHR;
- udelay(11);
- UHCHR &= ~UHCHR_FHR;
+ pxa27x_reset_hc(ohci);
- UHCCOMS |= 1;
+ /* Host Controller Reset */
+ uhccoms = __raw_readl(ohci->mmio_base + UHCCOMS) | 0x01;
+ __raw_writel(uhccoms, ohci->mmio_base + UHCCOMS);
udelay(10);
- clk_disable(usb_clk);
+ clk_disable(ohci->clk);
}
@@ -147,18 +278,22 @@ static void pxa27x_stop_hc(struct device *dev)
*/
int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device *pdev)
{
- int retval;
+ int retval, irq;
struct usb_hcd *hcd;
struct pxaohci_platform_data *inf;
+ struct pxa27x_ohci *ohci;
+ struct resource *r;
+ struct clk *usb_clk;
inf = pdev->dev.platform_data;
if (!inf)
return -ENODEV;
- if (pdev->resource[1].flags != IORESOURCE_IRQ) {
- pr_debug ("resource[1] is not IORESOURCE_IRQ");
- return -ENOMEM;
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ pr_err("no resource of IORESOURCE_IRQ");
+ return -ENXIO;
}
usb_clk = clk_get(&pdev->dev, "USBCLK");
@@ -168,8 +303,16 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x");
if (!hcd)
return -ENOMEM;
- hcd->rsrc_start = pdev->resource[0].start;
- hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ pr_err("no resource of IORESOURCE_MEM");
+ retval = -ENXIO;
+ goto err1;
+ }
+
+ hcd->rsrc_start = r->start;
+ hcd->rsrc_len = resource_size(r);
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
pr_debug("request_mem_region failed");
@@ -184,24 +327,30 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
goto err2;
}
- if ((retval = pxa27x_start_hc(&pdev->dev)) < 0) {
+ /* initialize "struct pxa27x_ohci" */
+ ohci = (struct pxa27x_ohci *)hcd_to_ohci(hcd);
+ ohci->dev = &pdev->dev;
+ ohci->clk = usb_clk;
+ ohci->mmio_base = (void __iomem *)hcd->regs;
+
+ if ((retval = pxa27x_start_hc(ohci, &pdev->dev)) < 0) {
pr_debug("pxa27x_start_hc failed");
goto err3;
}
/* Select Power Management Mode */
- pxa27x_ohci_select_pmm(inf->port_mode);
+ pxa27x_ohci_select_pmm(ohci, inf->port_mode);
if (inf->power_budget)
hcd->power_budget = inf->power_budget;
ohci_hcd_init(hcd_to_ohci(hcd));
- retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED);
+ retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
if (retval == 0)
return retval;
- pxa27x_stop_hc(&pdev->dev);
+ pxa27x_stop_hc(ohci, &pdev->dev);
err3:
iounmap(hcd->regs);
err2:
@@ -228,12 +377,14 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
*/
void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev)
{
+ struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
+
usb_remove_hcd(hcd);
- pxa27x_stop_hc(&pdev->dev);
+ pxa27x_stop_hc(ohci, &pdev->dev);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
- clk_put(usb_clk);
+ clk_put(ohci->clk);
}
/*-------------------------------------------------------------------------*/
@@ -266,7 +417,7 @@ ohci_pxa27x_start (struct usb_hcd *hcd)
static const struct hc_driver ohci_pxa27x_hc_driver = {
.description = hcd_name,
.product_desc = "PXA27x OHCI",
- .hcd_priv_size = sizeof(struct ohci_hcd),
+ .hcd_priv_size = sizeof(struct pxa27x_ohci),
/*
* generic hardware linkage
@@ -330,13 +481,13 @@ static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev)
static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_t state)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
- if (time_before(jiffies, ohci->next_statechange))
+ if (time_before(jiffies, ohci->ohci.next_statechange))
msleep(5);
- ohci->next_statechange = jiffies;
+ ohci->ohci.next_statechange = jiffies;
- pxa27x_stop_hc(&pdev->dev);
+ pxa27x_stop_hc(ohci, &pdev->dev);
hcd->state = HC_STATE_SUSPENDED;
return 0;
@@ -345,14 +496,14 @@ static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_
static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
int status;
- if (time_before(jiffies, ohci->next_statechange))
+ if (time_before(jiffies, ohci->ohci.next_statechange))
msleep(5);
- ohci->next_statechange = jiffies;
+ ohci->ohci.next_statechange = jiffies;
- if ((status = pxa27x_start_hc(&pdev->dev)) < 0)
+ if ((status = pxa27x_start_hc(ohci, &pdev->dev)) < 0)
return status;
ohci_finish_controller_resume(hcd);
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 70d135e0cc47..d85a74c64b54 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -172,11 +172,6 @@ config FB_DEFERRED_IO
bool
depends on FB
-config FB_METRONOME
- tristate
- depends on FB
- depends on FB_DEFERRED_IO
-
config FB_HECUBA
tristate
depends on FB
@@ -1974,19 +1969,6 @@ config FB_XILINX
framebuffer. ML300 carries a 640*480 LCD display on the board,
ML403 uses a standard DB15 VGA connector.
-config FB_AM200EPD
- tristate "AM-200 E-Ink EPD devkit support"
- depends on FB && ARCH_PXA && MMU
- select FB_SYS_FILLRECT
- select FB_SYS_COPYAREA
- select FB_SYS_IMAGEBLIT
- select FB_SYS_FOPS
- select FB_DEFERRED_IO
- select FB_METRONOME
- help
- This enables support for the Metronome display controller used on
- the E-Ink AM-200 EPD devkit.
-
config FB_COBALT
tristate "Cobalt server LCD frame buffer support"
depends on FB && MIPS_COBALT
@@ -2041,6 +2023,19 @@ config XEN_FBDEV_FRONTEND
frame buffer driver. It communicates with a back-end
in another domain.
+config FB_METRONOME
+ tristate "E-Ink Metronome/8track controller support"
+ depends on FB
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ help
+ This driver implements support for the E-Ink Metronome
+ controller. The pre-release name for this device was 8track
+ and could also have been called by some vendors as PVI-nnnn.
+
source "drivers/video/omap/Kconfig"
source "drivers/video/backlight/Kconfig"
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index a6b55297a7fb..ad0330bf9be3 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_FB_DEFERRED_IO) += fb_defio.o
# Hardware specific drivers go first
obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o
-obj-$(CONFIG_FB_AM200EPD) += am200epd.o
obj-$(CONFIG_FB_ARC) += arcfb.o
obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o
obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o
diff --git a/drivers/video/am200epd.c b/drivers/video/am200epd.c
deleted file mode 100644
index 0c35b8b0160e..000000000000
--- a/drivers/video/am200epd.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * linux/drivers/video/am200epd.c -- Platform device for AM200 EPD kit
- *
- * Copyright (C) 2008, Jaya Kumar
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- *
- * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
- *
- * This work was made possible by help and equipment support from E-Ink
- * Corporation. http://support.eink.com/community
- *
- * This driver is written to be used with the Metronome display controller.
- * on the AM200 EPD prototype kit/development kit with an E-Ink 800x600
- * Vizplex EPD on a Gumstix board using the Lyre interface board.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/list.h>
-#include <linux/uaccess.h>
-#include <linux/irq.h>
-
-#include <video/metronomefb.h>
-
-#include <mach/pxa-regs.h>
-
-/* register offsets for gpio control */
-#define LED_GPIO_PIN 51
-#define STDBY_GPIO_PIN 48
-#define RST_GPIO_PIN 49
-#define RDY_GPIO_PIN 32
-#define ERR_GPIO_PIN 17
-#define PCBPWR_GPIO_PIN 16
-
-#define AF_SEL_GPIO_N 0x3
-#define GAFR0_U_OFFSET(pin) ((pin - 16) * 2)
-#define GAFR1_L_OFFSET(pin) ((pin - 32) * 2)
-#define GAFR1_U_OFFSET(pin) ((pin - 48) * 2)
-#define GPDR1_OFFSET(pin) (pin - 32)
-#define GPCR1_OFFSET(pin) (pin - 32)
-#define GPSR1_OFFSET(pin) (pin - 32)
-#define GPCR0_OFFSET(pin) (pin)
-#define GPSR0_OFFSET(pin) (pin)
-
-static void am200_set_gpio_output(int pin, int val)
-{
- u8 index;
-
- index = pin >> 4;
-
- switch (index) {
- case 1:
- if (val)
- GPSR0 |= (1 << GPSR0_OFFSET(pin));
- else
- GPCR0 |= (1 << GPCR0_OFFSET(pin));
- break;
- case 2:
- break;
- case 3:
- if (val)
- GPSR1 |= (1 << GPSR1_OFFSET(pin));
- else
- GPCR1 |= (1 << GPCR1_OFFSET(pin));
- break;
- default:
- printk(KERN_ERR "unimplemented\n");
- }
-}
-
-static void __devinit am200_init_gpio_pin(int pin, int dir)
-{
- u8 index;
- /* dir 0 is output, 1 is input
- - do 2 things here:
- - set gpio alternate function to standard gpio
- - set gpio direction to input or output */
-
- index = pin >> 4;
- switch (index) {
- case 1:
- GAFR0_U &= ~(AF_SEL_GPIO_N << GAFR0_U_OFFSET(pin));
-
- if (dir)
- GPDR0 &= ~(1 << pin);
- else
- GPDR0 |= (1 << pin);
- break;
- case 2:
- GAFR1_L &= ~(AF_SEL_GPIO_N << GAFR1_L_OFFSET(pin));
-
- if (dir)
- GPDR1 &= ~(1 << GPDR1_OFFSET(pin));
- else
- GPDR1 |= (1 << GPDR1_OFFSET(pin));
- break;
- case 3:
- GAFR1_U &= ~(AF_SEL_GPIO_N << GAFR1_U_OFFSET(pin));
-
- if (dir)
- GPDR1 &= ~(1 << GPDR1_OFFSET(pin));
- else
- GPDR1 |= (1 << GPDR1_OFFSET(pin));
- break;
- default:
- printk(KERN_ERR "unimplemented\n");
- }
-}
-
-static void am200_init_gpio_regs(struct metronomefb_par *par)
-{
- am200_init_gpio_pin(LED_GPIO_PIN, 0);
- am200_set_gpio_output(LED_GPIO_PIN, 0);
-
- am200_init_gpio_pin(STDBY_GPIO_PIN, 0);
- am200_set_gpio_output(STDBY_GPIO_PIN, 0);
-
- am200_init_gpio_pin(RST_GPIO_PIN, 0);
- am200_set_gpio_output(RST_GPIO_PIN, 0);
-
- am200_init_gpio_pin(RDY_GPIO_PIN, 1);
-
- am200_init_gpio_pin(ERR_GPIO_PIN, 1);
-
- am200_init_gpio_pin(PCBPWR_GPIO_PIN, 0);
- am200_set_gpio_output(PCBPWR_GPIO_PIN, 0);
-}
-
-static void am200_disable_lcd_controller(struct metronomefb_par *par)
-{
- LCSR = 0xffffffff; /* Clear LCD Status Register */
- LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */
-
- /* we reset and just wait for things to settle */
- msleep(200);
-}
-
-static void am200_enable_lcd_controller(struct metronomefb_par *par)
-{
- LCSR = 0xffffffff;
- FDADR0 = par->metromem_desc_dma;
- LCCR0 |= LCCR0_ENB;
-}
-
-static void am200_init_lcdc_regs(struct metronomefb_par *par)
-{
- /* here we do:
- - disable the lcd controller
- - setup lcd control registers
- - setup dma descriptor
- - reenable lcd controller
- */
-
- /* disable the lcd controller */
- am200_disable_lcd_controller(par);
-
- /* setup lcd control registers */
- LCCR0 = LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM | LCCR0_PAS
- | LCCR0_QDM | LCCR0_BM | LCCR0_OUM;
-
- LCCR1 = (par->info->var.xres/2 - 1) /* pixels per line */
- | (27 << 10) /* hsync pulse width - 1 */
- | (33 << 16) /* eol pixel count */
- | (33 << 24); /* bol pixel count */
-
- LCCR2 = (par->info->var.yres - 1) /* lines per panel */
- | (24 << 10) /* vsync pulse width - 1 */
- | (2 << 16) /* eof pixel count */
- | (0 << 24); /* bof pixel count */
-
- LCCR3 = 2 /* pixel clock divisor */
- | (24 << 8) /* AC Bias pin freq */
- | LCCR3_16BPP /* BPP */
- | LCCR3_PCP; /* PCP falling edge */
-
-}
-
-static void am200_post_dma_setup(struct metronomefb_par *par)
-{
- par->metromem_desc->mFDADR0 = par->metromem_desc_dma;
- par->metromem_desc->mFSADR0 = par->metromem_dma;
- par->metromem_desc->mFIDR0 = 0;
- par->metromem_desc->mLDCMD0 = par->info->var.xres
- * par->info->var.yres;
- am200_enable_lcd_controller(par);
-}
-
-static void am200_free_irq(struct fb_info *info)
-{
- free_irq(IRQ_GPIO(RDY_GPIO_PIN), info);
-}
-
-static irqreturn_t am200_handle_irq(int irq, void *dev_id)
-{
- struct fb_info *info = dev_id;
- struct metronomefb_par *par = info->par;
-
- wake_up_interruptible(&par->waitq);
- return IRQ_HANDLED;
-}
-
-static int am200_setup_irq(struct fb_info *info)
-{
- int retval;
-
- retval = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am200_handle_irq,
- IRQF_DISABLED, "AM200", info);
- if (retval) {
- printk(KERN_ERR "am200epd: request_irq failed: %d\n", retval);
- return retval;
- }
-
- return set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQ_TYPE_EDGE_FALLING);
-}
-
-static void am200_set_rst(struct metronomefb_par *par, int state)
-{
- am200_set_gpio_output(RST_GPIO_PIN, state);
-}
-
-static void am200_set_stdby(struct metronomefb_par *par, int state)
-{
- am200_set_gpio_output(STDBY_GPIO_PIN, state);
-}
-
-static int am200_wait_event(struct metronomefb_par *par)
-{
- return wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ);
-}
-
-static int am200_wait_event_intr(struct metronomefb_par *par)
-{
- return wait_event_interruptible_timeout(par->waitq, (GPLR1 & 0x01), HZ);
-}
-
-static struct metronome_board am200_board = {
- .owner = THIS_MODULE,
- .free_irq = am200_free_irq,
- .setup_irq = am200_setup_irq,
- .init_gpio_regs = am200_init_gpio_regs,
- .init_lcdc_regs = am200_init_lcdc_regs,
- .post_dma_setup = am200_post_dma_setup,
- .set_rst = am200_set_rst,
- .set_stdby = am200_set_stdby,
- .met_wait_event = am200_wait_event,
- .met_wait_event_intr = am200_wait_event_intr,
-};
-
-static struct platform_device *am200_device;
-
-static int __init am200_init(void)
-{
- int ret;
-
- /* request our platform independent driver */
- request_module("metronomefb");
-
- am200_device = platform_device_alloc("metronomefb", -1);
- if (!am200_device)
- return -ENOMEM;
-
- platform_device_add_data(am200_device, &am200_board,
- sizeof(am200_board));
-
- /* this _add binds metronomefb to am200. metronomefb refcounts am200 */
- ret = platform_device_add(am200_device);
-
- if (ret)
- platform_device_put(am200_device);
-
- return ret;
-}
-
-static void __exit am200_exit(void)
-{
- platform_device_unregister(am200_device);
-}
-
-module_init(am200_init);
-module_exit(am200_exit);
-
-MODULE_DESCRIPTION("board driver for am200 metronome epd kit");
-MODULE_AUTHOR("Jaya Kumar");
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 452b770d8cc9..c72a13562954 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -24,6 +24,13 @@ config LCD_CLASS_DEVICE
To have support for your specific LCD panel you will have to
select the proper drivers which depend on this option.
+config LCD_CORGI
+ tristate "LCD Panel support for SHARP corgi/spitz model"
+ depends on LCD_CLASS_DEVICE && SPI_MASTER && PXA_SHARPSL
+ help
+ Say y here to support the LCD panels usually found on SHARP
+ corgi (C7x0) and spitz (Cxx00) models.
+
config LCD_LTV350QV
tristate "Samsung LTV350QV LCD Panel"
depends on LCD_CLASS_DEVICE && SPI_MASTER
@@ -44,6 +51,14 @@ config LCD_ILI9320
If you have a panel based on the ILI9320 controller chip
then say y to include a power driver for it.
+config LCD_TDO24M
+ tristate "Toppoly TDO24M LCD Panels support"
+ depends on LCD_CLASS_DEVICE && SPI_MASTER
+ default n
+ help
+ If you have a Toppoly TDO24M series LCD panel, say y here to
+ include the support for it.
+
config LCD_VGG2432A4
tristate "VGG2432A4 LCM device support"
depends on BACKLIGHT_LCD_SUPPORT && LCD_CLASS_DEVICE && SPI_MASTER
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index b405aace803f..3ec551eb472c 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -1,10 +1,12 @@
# Backlight & LCD drivers
obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
+obj-$(CONFIG_LCD_CORGI) += corgi_lcd.o
obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
obj-$(CONFIG_LCD_ILI9320) += ili9320.o
obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o
obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o
+obj-$(CONFIG_LCD_TDO24M) += tdo24m.o
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c
new file mode 100644
index 000000000000..2afd47eefe74
--- /dev/null
+++ b/drivers/video/backlight/corgi_lcd.c
@@ -0,0 +1,641 @@
+/*
+ * LCD/Backlight Driver for Sharp Zaurus Handhelds (various models)
+ *
+ * Copyright (c) 2004-2006 Richard Purdie
+ *
+ * Based on Sharp's 2.4 Backlight Driver
+ *
+ * Copyright (c) 2008 Marvell International Ltd.
+ * Converted to SPI device based LCD/Backlight device driver
+ * by Eric Miao <eric.miao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/fb.h>
+#include <linux/lcd.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/corgi_lcd.h>
+#include <asm/mach/sharpsl_param.h>
+
+#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
+
+/* Register Addresses */
+#define RESCTL_ADRS 0x00
+#define PHACTRL_ADRS 0x01
+#define DUTYCTRL_ADRS 0x02
+#define POWERREG0_ADRS 0x03
+#define POWERREG1_ADRS 0x04
+#define GPOR3_ADRS 0x05
+#define PICTRL_ADRS 0x06
+#define POLCTRL_ADRS 0x07
+
+/* Register Bit Definitions */
+#define RESCTL_QVGA 0x01
+#define RESCTL_VGA 0x00
+
+#define POWER1_VW_ON 0x01 /* VW Supply FET ON */
+#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */
+#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */
+
+#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */
+#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */
+#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */
+
+#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */
+#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */
+#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */
+#define POWER0_COM_ON 0x08 /* COM Power Supply ON */
+#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */
+
+#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */
+#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */
+#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */
+
+#define PICTRL_INIT_STATE 0x01
+#define PICTRL_INIOFF 0x02
+#define PICTRL_POWER_DOWN 0x04
+#define PICTRL_COM_SIGNAL_OFF 0x08
+#define PICTRL_DAC_SIGNAL_OFF 0x10
+
+#define POLCTRL_SYNC_POL_FALL 0x01
+#define POLCTRL_EN_POL_FALL 0x02
+#define POLCTRL_DATA_POL_FALL 0x04
+#define POLCTRL_SYNC_ACT_H 0x08
+#define POLCTRL_EN_ACT_L 0x10
+
+#define POLCTRL_SYNC_POL_RISE 0x00
+#define POLCTRL_EN_POL_RISE 0x00
+#define POLCTRL_DATA_POL_RISE 0x00
+#define POLCTRL_SYNC_ACT_L 0x00
+#define POLCTRL_EN_ACT_H 0x00
+
+#define PHACTRL_PHASE_MANUAL 0x01
+#define DEFAULT_PHAD_QVGA (9)
+#define DEFAULT_COMADJ (125)
+
+struct corgi_lcd {
+ struct spi_device *spi_dev;
+ struct lcd_device *lcd_dev;
+ struct backlight_device *bl_dev;
+
+ int limit_mask;
+ int intensity;
+ int power;
+ int mode;
+ char buf[2];
+
+ int gpio_backlight_on;
+ int gpio_backlight_cont;
+ int gpio_backlight_cont_inverted;
+
+ void (*kick_battery)(void);
+};
+
+static int corgi_ssp_lcdtg_send(struct corgi_lcd *lcd, int reg, uint8_t val);
+
+static struct corgi_lcd *the_corgi_lcd;
+static unsigned long corgibl_flags;
+#define CORGIBL_SUSPENDED 0x01
+#define CORGIBL_BATTLOW 0x02
+
+/*
+ * This is only a psuedo I2C interface. We can't use the standard kernel
+ * routines as the interface is write only. We just assume the data is acked...
+ */
+static void lcdtg_ssp_i2c_send(struct corgi_lcd *lcd, uint8_t data)
+{
+ corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS, data);
+ udelay(10);
+}
+
+static void lcdtg_i2c_send_bit(struct corgi_lcd *lcd, uint8_t data)
+{
+ lcdtg_ssp_i2c_send(lcd, data);
+ lcdtg_ssp_i2c_send(lcd, data | POWER0_COM_DCLK);
+ lcdtg_ssp_i2c_send(lcd, data);
+}
+
+static void lcdtg_i2c_send_start(struct corgi_lcd *lcd, uint8_t base)
+{
+ lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK | POWER0_COM_DOUT);
+ lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK);
+ lcdtg_ssp_i2c_send(lcd, base);
+}
+
+static void lcdtg_i2c_send_stop(struct corgi_lcd *lcd, uint8_t base)
+{
+ lcdtg_ssp_i2c_send(lcd, base);
+ lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK);
+ lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK | POWER0_COM_DOUT);
+}
+
+static void lcdtg_i2c_send_byte(struct corgi_lcd *lcd,
+ uint8_t base, uint8_t data)
+{
+ int i;
+ for (i = 0; i < 8; i++) {
+ if (data & 0x80)
+ lcdtg_i2c_send_bit(lcd, base | POWER0_COM_DOUT);
+ else
+ lcdtg_i2c_send_bit(lcd, base);
+ data <<= 1;
+ }
+}
+
+static void lcdtg_i2c_wait_ack(struct corgi_lcd *lcd, uint8_t base)
+{
+ lcdtg_i2c_send_bit(lcd, base);
+}
+
+static void lcdtg_set_common_voltage(struct corgi_lcd *lcd,
+ uint8_t base_data, uint8_t data)
+{
+ /* Set Common Voltage to M62332FP via I2C */
+ lcdtg_i2c_send_start(lcd, base_data);
+ lcdtg_i2c_send_byte(lcd, base_data, 0x9c);
+ lcdtg_i2c_wait_ack(lcd, base_data);
+ lcdtg_i2c_send_byte(lcd, base_data, 0x00);
+ lcdtg_i2c_wait_ack(lcd, base_data);
+ lcdtg_i2c_send_byte(lcd, base_data, data);
+ lcdtg_i2c_wait_ack(lcd, base_data);
+ lcdtg_i2c_send_stop(lcd, base_data);
+}
+
+static int corgi_ssp_lcdtg_send(struct corgi_lcd *lcd, int adrs, uint8_t data)
+{
+ struct spi_message msg;
+ struct spi_transfer xfer = {
+ .len = 1,
+ .cs_change = 1,
+ .tx_buf = lcd->buf,
+ };
+
+ lcd->buf[0] = ((adrs & 0x07) << 5) | (data & 0x1f);
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfer, &msg);
+
+ return spi_sync(lcd->spi_dev, &msg);
+}
+
+/* Set Phase Adjust */
+static void lcdtg_set_phadadj(struct corgi_lcd *lcd, int mode)
+{
+ int adj;
+
+ switch(mode) {
+ case CORGI_LCD_MODE_VGA:
+ /* Setting for VGA */
+ adj = sharpsl_param.phadadj;
+ adj = (adj < 0) ? PHACTRL_PHASE_MANUAL :
+ PHACTRL_PHASE_MANUAL | ((adj & 0xf) << 1);
+ break;
+ case CORGI_LCD_MODE_QVGA:
+ default:
+ /* Setting for QVGA */
+ adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
+ break;
+ }
+
+ corgi_ssp_lcdtg_send(lcd, PHACTRL_ADRS, adj);
+}
+
+static void corgi_lcd_power_on(struct corgi_lcd *lcd)
+{
+ int comadj;
+
+ /* Initialize Internal Logic & Port */
+ corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS,
+ PICTRL_POWER_DOWN | PICTRL_INIOFF |
+ PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF |
+ PICTRL_DAC_SIGNAL_OFF);
+
+ corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+ POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF |
+ POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+ corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+ POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
+
+ /* VDD(+8V), SVSS(-4V) ON */
+ corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+ POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
+ mdelay(3);
+
+ /* DAC ON */
+ corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+ POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
+ POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+ /* INIB = H, INI = L */
+ /* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
+ corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS,
+ PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
+
+ /* Set Common Voltage */
+ comadj = sharpsl_param.comadj;
+ if (comadj < 0)
+ comadj = DEFAULT_COMADJ;
+
+ lcdtg_set_common_voltage(lcd, POWER0_DAC_ON | POWER0_COM_OFF |
+ POWER0_VCC5_OFF, comadj);
+
+ /* VCC5 ON, DAC ON */
+ corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+ POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
+ POWER0_COM_OFF | POWER0_VCC5_ON);
+
+ /* GVSS(-8V) ON, VDD ON */
+ corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+ POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
+ mdelay(2);
+
+ /* COM SIGNAL ON (PICTL[3] = L) */
+ corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, PICTRL_INIT_STATE);
+
+ /* COM ON, DAC ON, VCC5_ON */
+ corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+ POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
+ POWER0_COM_ON | POWER0_VCC5_ON);
+
+ /* VW ON, GVSS ON, VDD ON */
+ corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+ POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
+
+ /* Signals output enable */
+ corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, 0);
+
+ /* Set Phase Adjust */
+ lcdtg_set_phadadj(lcd, lcd->mode);
+
+ /* Initialize for Input Signals from ATI */
+ corgi_ssp_lcdtg_send(lcd, POLCTRL_ADRS,
+ POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE |
+ POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L |
+ POLCTRL_EN_ACT_H);
+ udelay(1000);
+
+ switch (lcd->mode) {
+ case CORGI_LCD_MODE_VGA:
+ corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_VGA);
+ break;
+ case CORGI_LCD_MODE_QVGA:
+ default:
+ corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_QVGA);
+ break;
+ }
+}
+
+static void corgi_lcd_power_off(struct corgi_lcd *lcd)
+{
+ /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
+ msleep(34);
+
+ /* (1)VW OFF */
+ corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+ POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
+
+ /* (2)COM OFF */
+ corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
+ corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+ POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
+
+ /* (3)Set Common Voltage Bias 0V */
+ lcdtg_set_common_voltage(lcd, POWER0_DAC_ON | POWER0_COM_OFF |
+ POWER0_VCC5_ON, 0);
+
+ /* (4)GVSS OFF */
+ corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+ POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
+
+ /* (5)VCC5 OFF */
+ corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+ POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+ /* (6)Set PDWN, INIOFF, DACOFF */
+ corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS,
+ PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
+ PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
+
+ /* (7)DAC OFF */
+ corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS,
+ POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+ /* (8)VDD OFF */
+ corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS,
+ POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
+}
+
+static int corgi_lcd_set_mode(struct lcd_device *ld, struct fb_videomode *m)
+{
+ struct corgi_lcd *lcd = dev_get_drvdata(&ld->dev);
+ int mode = CORGI_LCD_MODE_QVGA;
+
+ if (m->xres == 640 || m->xres == 480)
+ mode = CORGI_LCD_MODE_VGA;
+
+ if (lcd->mode == mode)
+ return 0;
+
+ lcdtg_set_phadadj(lcd, mode);
+
+ switch (mode) {
+ case CORGI_LCD_MODE_VGA:
+ corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_VGA);
+ break;
+ case CORGI_LCD_MODE_QVGA:
+ default:
+ corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_QVGA);
+ break;
+ }
+
+ lcd->mode = mode;
+ return 0;
+}
+
+static int corgi_lcd_set_power(struct lcd_device *ld, int power)
+{
+ struct corgi_lcd *lcd = dev_get_drvdata(&ld->dev);
+
+ if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
+ corgi_lcd_power_on(lcd);
+
+ if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
+ corgi_lcd_power_off(lcd);
+
+ lcd->power = power;
+ return 0;
+}
+
+static int corgi_lcd_get_power(struct lcd_device *ld)
+{
+ struct corgi_lcd *lcd = dev_get_drvdata(&ld->dev);
+
+ return lcd->power;
+}
+
+static struct lcd_ops corgi_lcd_ops = {
+ .get_power = corgi_lcd_get_power,
+ .set_power = corgi_lcd_set_power,
+ .set_mode = corgi_lcd_set_mode,
+};
+
+static int corgi_bl_get_intensity(struct backlight_device *bd)
+{
+ struct corgi_lcd *lcd = dev_get_drvdata(&bd->dev);
+
+ return lcd->intensity;
+}
+
+static int corgi_bl_set_intensity(struct corgi_lcd *lcd, int intensity)
+{
+ int cont;
+
+ if (intensity > 0x10)
+ intensity += 0x10;
+
+ corgi_ssp_lcdtg_send(lcd, DUTYCTRL_ADRS, intensity);
+
+ /* Bit 5 via GPIO_BACKLIGHT_CONT */
+ cont = !!(intensity & 0x20) ^ lcd->gpio_backlight_cont_inverted;
+
+ if (gpio_is_valid(lcd->gpio_backlight_cont))
+ gpio_set_value(lcd->gpio_backlight_cont, cont);
+
+ if (gpio_is_valid(lcd->gpio_backlight_on))
+ gpio_set_value(lcd->gpio_backlight_on, intensity);
+
+ if (lcd->kick_battery)
+ lcd->kick_battery();
+
+ lcd->intensity = intensity;
+ return 0;
+}
+
+static int corgi_bl_update_status(struct backlight_device *bd)
+{
+ struct corgi_lcd *lcd = dev_get_drvdata(&bd->dev);
+ int intensity = bd->props.brightness;
+
+ if (bd->props.power != FB_BLANK_UNBLANK)
+ intensity = 0;
+
+ if (bd->props.fb_blank != FB_BLANK_UNBLANK)
+ intensity = 0;
+
+ if (corgibl_flags & CORGIBL_SUSPENDED)
+ intensity = 0;
+ if (corgibl_flags & CORGIBL_BATTLOW)
+ intensity &= lcd->limit_mask;
+
+ return corgi_bl_set_intensity(lcd, intensity);
+}
+
+void corgibl_limit_intensity(int limit)
+{
+ if (limit)
+ corgibl_flags |= CORGIBL_BATTLOW;
+ else
+ corgibl_flags &= ~CORGIBL_BATTLOW;
+
+ backlight_update_status(the_corgi_lcd->bl_dev);
+}
+EXPORT_SYMBOL(corgibl_limit_intensity);
+
+static struct backlight_ops corgi_bl_ops = {
+ .get_brightness = corgi_bl_get_intensity,
+ .update_status = corgi_bl_update_status,
+};
+
+#ifdef CONFIG_PM
+static int corgi_lcd_suspend(struct spi_device *spi, pm_message_t state)
+{
+ struct corgi_lcd *lcd = dev_get_drvdata(&spi->dev);
+
+ corgibl_flags |= CORGIBL_SUSPENDED;
+ corgi_bl_set_intensity(lcd, 0);
+ corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_POWERDOWN);
+ return 0;
+}
+
+static int corgi_lcd_resume(struct spi_device *spi)
+{
+ struct corgi_lcd *lcd = dev_get_drvdata(&spi->dev);
+
+ corgibl_flags &= ~CORGIBL_SUSPENDED;
+ corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_UNBLANK);
+ backlight_update_status(lcd->bl_dev);
+ return 0;
+}
+#else
+#define corgi_lcd_suspend NULL
+#define corgi_lcd_resume NULL
+#endif
+
+static int setup_gpio_backlight(struct corgi_lcd *lcd,
+ struct corgi_lcd_platform_data *pdata)
+{
+ struct spi_device *spi = lcd->spi_dev;
+ int err;
+
+ lcd->gpio_backlight_on = -1;
+ lcd->gpio_backlight_cont = -1;
+
+ if (gpio_is_valid(pdata->gpio_backlight_on)) {
+ err = gpio_request(pdata->gpio_backlight_on, "BL_ON");
+ if (err) {
+ dev_err(&spi->dev, "failed to request GPIO%d for "
+ "backlight_on\n", pdata->gpio_backlight_on);
+ return err;
+ }
+
+ lcd->gpio_backlight_on = pdata->gpio_backlight_on;
+ gpio_direction_output(lcd->gpio_backlight_on, 0);
+ }
+
+ if (gpio_is_valid(pdata->gpio_backlight_cont)) {
+ err = gpio_request(pdata->gpio_backlight_cont, "BL_CONT");
+ if (err) {
+ dev_err(&spi->dev, "failed to request GPIO%d for "
+ "backlight_cont\n", pdata->gpio_backlight_cont);
+ goto err_free_backlight_on;
+ }
+
+ lcd->gpio_backlight_cont = pdata->gpio_backlight_cont;
+
+ /* spitz and akita use both GPIOs for backlight, and
+ * have inverted polarity of GPIO_BACKLIGHT_CONT
+ */
+ if (gpio_is_valid(lcd->gpio_backlight_on)) {
+ lcd->gpio_backlight_cont_inverted = 1;
+ gpio_direction_output(lcd->gpio_backlight_cont, 1);
+ } else {
+ lcd->gpio_backlight_cont_inverted = 0;
+ gpio_direction_output(lcd->gpio_backlight_cont, 0);
+ }
+ }
+ return 0;
+
+err_free_backlight_on:
+ if (gpio_is_valid(lcd->gpio_backlight_on))
+ gpio_free(lcd->gpio_backlight_on);
+ return err;
+}
+
+static int __devinit corgi_lcd_probe(struct spi_device *spi)
+{
+ struct corgi_lcd_platform_data *pdata = spi->dev.platform_data;
+ struct corgi_lcd *lcd;
+ int ret = 0;
+
+ if (pdata == NULL) {
+ dev_err(&spi->dev, "platform data not available\n");
+ return -EINVAL;
+ }
+
+ lcd = kzalloc(sizeof(struct corgi_lcd), GFP_KERNEL);
+ if (!lcd) {
+ dev_err(&spi->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ lcd->spi_dev = spi;
+
+ lcd->lcd_dev = lcd_device_register("corgi_lcd", &spi->dev,
+ lcd, &corgi_lcd_ops);
+ if (IS_ERR(lcd->lcd_dev)) {
+ ret = PTR_ERR(lcd->lcd_dev);
+ goto err_free_lcd;
+ }
+ lcd->power = FB_BLANK_POWERDOWN;
+ lcd->mode = (pdata) ? pdata->init_mode : CORGI_LCD_MODE_VGA;
+
+ lcd->bl_dev = backlight_device_register("corgi_bl", &spi->dev,
+ lcd, &corgi_bl_ops);
+ if (IS_ERR(lcd->bl_dev)) {
+ ret = PTR_ERR(lcd->bl_dev);
+ goto err_unregister_lcd;
+ }
+ lcd->bl_dev->props.max_brightness = pdata->max_intensity;
+ lcd->bl_dev->props.brightness = pdata->default_intensity;
+ lcd->bl_dev->props.power = FB_BLANK_UNBLANK;
+
+ ret = setup_gpio_backlight(lcd, pdata);
+ if (ret)
+ goto err_unregister_bl;
+
+ lcd->kick_battery = pdata->kick_battery;
+
+ dev_set_drvdata(&spi->dev, lcd);
+ corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_UNBLANK);
+ backlight_update_status(lcd->bl_dev);
+
+ lcd->limit_mask = pdata->limit_mask;
+ the_corgi_lcd = lcd;
+ return 0;
+
+err_unregister_bl:
+ backlight_device_unregister(lcd->bl_dev);
+err_unregister_lcd:
+ lcd_device_unregister(lcd->lcd_dev);
+err_free_lcd:
+ kfree(lcd);
+ return ret;
+}
+
+static int __devexit corgi_lcd_remove(struct spi_device *spi)
+{
+ struct corgi_lcd *lcd = dev_get_drvdata(&spi->dev);
+
+ lcd->bl_dev->props.power = FB_BLANK_UNBLANK;
+ lcd->bl_dev->props.brightness = 0;
+ backlight_update_status(lcd->bl_dev);
+ backlight_device_unregister(lcd->bl_dev);
+
+ if (gpio_is_valid(lcd->gpio_backlight_on))
+ gpio_free(lcd->gpio_backlight_on);
+
+ if (gpio_is_valid(lcd->gpio_backlight_cont))
+ gpio_free(lcd->gpio_backlight_cont);
+
+ corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_POWERDOWN);
+ lcd_device_unregister(lcd->lcd_dev);
+ kfree(lcd);
+
+ return 0;
+}
+
+static struct spi_driver corgi_lcd_driver = {
+ .driver = {
+ .name = "corgi-lcd",
+ .owner = THIS_MODULE,
+ },
+ .probe = corgi_lcd_probe,
+ .remove = __devexit_p(corgi_lcd_remove),
+ .suspend = corgi_lcd_suspend,
+ .resume = corgi_lcd_resume,
+};
+
+static int __init corgi_lcd_init(void)
+{
+ return spi_register_driver(&corgi_lcd_driver);
+}
+module_init(corgi_lcd_init);
+
+static void __exit corgi_lcd_exit(void)
+{
+ spi_unregister_driver(&corgi_lcd_driver);
+}
+module_exit(corgi_lcd_exit);
+
+MODULE_DESCRIPTION("LCD and backlight driver for SHARP C7x0/Cxx00");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c
index b15b2b84a6f7..8e1731d3b228 100644
--- a/drivers/video/backlight/lcd.c
+++ b/drivers/video/backlight/lcd.c
@@ -27,14 +27,26 @@ static int fb_notifier_callback(struct notifier_block *self,
struct fb_event *evdata = data;
/* If we aren't interested in this event, skip it immediately ... */
- if (event != FB_EVENT_BLANK)
+ switch (event) {
+ case FB_EVENT_BLANK:
+ case FB_EVENT_MODE_CHANGE:
+ case FB_EVENT_MODE_CHANGE_ALL:
+ break;
+ default:
return 0;
+ }
ld = container_of(self, struct lcd_device, fb_notif);
+ if (!ld->ops)
+ return 0;
+
mutex_lock(&ld->ops_lock);
- if (ld->ops)
- if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info))
+ if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info)) {
+ if (event == FB_EVENT_BLANK)
ld->ops->set_power(ld, *(int *)evdata->data);
+ else
+ ld->ops->set_mode(ld, evdata->data);
+ }
mutex_unlock(&ld->ops_lock);
return 0;
}
diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c
new file mode 100644
index 000000000000..8427669162ea
--- /dev/null
+++ b/drivers/video/backlight/tdo24m.c
@@ -0,0 +1,396 @@
+/*
+ * tdo24m - SPI-based drivers for Toppoly TDO24M series LCD panels
+ *
+ * Copyright (C) 2008 Marvell International Ltd.
+ * Eric Miao <eric.miao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/fb.h>
+#include <linux/lcd.h>
+
+#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
+
+#define TDO24M_SPI_BUFF_SIZE (4)
+#define MODE_QVGA 0
+#define MODE_VGA 1
+
+struct tdo24m {
+ struct spi_device *spi_dev;
+ struct lcd_device *lcd_dev;
+
+ struct spi_message msg;
+ struct spi_transfer xfer;
+ uint8_t *buf;
+
+ int power;
+ int mode;
+};
+
+/* use bit 30, 31 as the indicator of command parameter number */
+#define CMD0(x) ((0 << 30) | (x))
+#define CMD1(x, x1) ((1 << 30) | ((x) << 9) | 0x100 | (x1))
+#define CMD2(x, x1, x2) ((2 << 30) | ((x) << 18) | 0x20000 |\
+ ((x1) << 9) | 0x100 | (x2))
+#define CMD_NULL (-1)
+
+static uint32_t lcd_panel_reset[] = {
+ CMD0(0x1), /* reset */
+ CMD0(0x0), /* nop */
+ CMD0(0x0), /* nop */
+ CMD0(0x0), /* nop */
+ CMD_NULL,
+};
+
+static uint32_t lcd_panel_on[] = {
+ CMD0(0x29), /* Display ON */
+ CMD2(0xB8, 0xFF, 0xF9), /* Output Control */
+ CMD0(0x11), /* Sleep out */
+ CMD1(0xB0, 0x16), /* Wake */
+ CMD_NULL,
+};
+
+static uint32_t lcd_panel_off[] = {
+ CMD0(0x28), /* Display OFF */
+ CMD2(0xB8, 0x80, 0x02), /* Output Control */
+ CMD0(0x10), /* Sleep in */
+ CMD1(0xB0, 0x00), /* Deep stand by in */
+ CMD_NULL,
+};
+
+static uint32_t lcd_vga_pass_through[] = {
+ CMD1(0xB0, 0x16),
+ CMD1(0xBC, 0x80),
+ CMD1(0xE1, 0x00),
+ CMD1(0x36, 0x50),
+ CMD1(0x3B, 0x00),
+ CMD_NULL,
+};
+
+static uint32_t lcd_qvga_pass_through[] = {
+ CMD1(0xB0, 0x16),
+ CMD1(0xBC, 0x81),
+ CMD1(0xE1, 0x00),
+ CMD1(0x36, 0x50),
+ CMD1(0x3B, 0x22),
+ CMD_NULL,
+};
+
+static uint32_t lcd_vga_transfer[] = {
+ CMD1(0xcf, 0x02), /* Blanking period control (1) */
+ CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */
+ CMD1(0xd1, 0x01), /* CKV timing control on/off */
+ CMD2(0xd2, 0x14, 0x00), /* CKV 1,2 timing control */
+ CMD2(0xd3, 0x1a, 0x0f), /* OEV timing control */
+ CMD2(0xd4, 0x1f, 0xaf), /* ASW timing control (1) */
+ CMD1(0xd5, 0x14), /* ASW timing control (2) */
+ CMD0(0x21), /* Invert for normally black display */
+ CMD0(0x29), /* Display on */
+ CMD_NULL,
+};
+
+static uint32_t lcd_qvga_transfer[] = {
+ CMD1(0xd6, 0x02), /* Blanking period control (1) */
+ CMD2(0xd7, 0x08, 0x04), /* Blanking period control (2) */
+ CMD1(0xd8, 0x01), /* CKV timing control on/off */
+ CMD2(0xd9, 0x00, 0x08), /* CKV 1,2 timing control */
+ CMD2(0xde, 0x05, 0x0a), /* OEV timing control */
+ CMD2(0xdf, 0x0a, 0x19), /* ASW timing control (1) */
+ CMD1(0xe0, 0x0a), /* ASW timing control (2) */
+ CMD0(0x21), /* Invert for normally black display */
+ CMD0(0x29), /* Display on */
+ CMD_NULL,
+};
+
+static uint32_t lcd_panel_config[] = {
+ CMD2(0xb8, 0xff, 0xf9), /* Output control */
+ CMD0(0x11), /* sleep out */
+ CMD1(0xba, 0x01), /* Display mode (1) */
+ CMD1(0xbb, 0x00), /* Display mode (2) */
+ CMD1(0x3a, 0x60), /* Display mode 18-bit RGB */
+ CMD1(0xbf, 0x10), /* Drive system change control */
+ CMD1(0xb1, 0x56), /* Booster operation setup */
+ CMD1(0xb2, 0x33), /* Booster mode setup */
+ CMD1(0xb3, 0x11), /* Booster frequency setup */
+ CMD1(0xb4, 0x02), /* Op amp/system clock */
+ CMD1(0xb5, 0x35), /* VCS voltage */
+ CMD1(0xb6, 0x40), /* VCOM voltage */
+ CMD1(0xb7, 0x03), /* External display signal */
+ CMD1(0xbd, 0x00), /* ASW slew rate */
+ CMD1(0xbe, 0x00), /* Dummy data for QuadData operation */
+ CMD1(0xc0, 0x11), /* Sleep out FR count (A) */
+ CMD1(0xc1, 0x11), /* Sleep out FR count (B) */
+ CMD1(0xc2, 0x11), /* Sleep out FR count (C) */
+ CMD2(0xc3, 0x20, 0x40), /* Sleep out FR count (D) */
+ CMD2(0xc4, 0x60, 0xc0), /* Sleep out FR count (E) */
+ CMD2(0xc5, 0x10, 0x20), /* Sleep out FR count (F) */
+ CMD1(0xc6, 0xc0), /* Sleep out FR count (G) */
+ CMD2(0xc7, 0x33, 0x43), /* Gamma 1 fine tuning (1) */
+ CMD1(0xc8, 0x44), /* Gamma 1 fine tuning (2) */
+ CMD1(0xc9, 0x33), /* Gamma 1 inclination adjustment */
+ CMD1(0xca, 0x00), /* Gamma 1 blue offset adjustment */
+ CMD2(0xec, 0x01, 0xf0), /* Horizontal clock cycles */
+ CMD_NULL,
+};
+
+static int tdo24m_writes(struct tdo24m *lcd, uint32_t *array)
+{
+ struct spi_transfer *x = &lcd->xfer;
+ uint32_t data, *p = array;
+ int nparams, err = 0;
+
+ for (; *p != CMD_NULL; p++) {
+
+ nparams = (*p >> 30) & 0x3;
+
+ data = *p << (7 - nparams);
+ switch (nparams) {
+ case 0:
+ lcd->buf[0] = (data >> 8) & 0xff;
+ lcd->buf[1] = data & 0xff;
+ break;
+ case 1:
+ lcd->buf[0] = (data >> 16) & 0xff;
+ lcd->buf[1] = (data >> 8) & 0xff;
+ lcd->buf[2] = data & 0xff;
+ break;
+ case 2:
+ lcd->buf[0] = (data >> 24) & 0xff;
+ lcd->buf[1] = (data >> 16) & 0xff;
+ lcd->buf[2] = (data >> 8) & 0xff;
+ lcd->buf[3] = data & 0xff;
+ break;
+ default:
+ continue;
+ }
+ x->len = nparams + 2;
+ err = spi_sync(lcd->spi_dev, &lcd->msg);
+ if (err)
+ break;
+ }
+
+ return err;
+}
+
+static int tdo24m_adj_mode(struct tdo24m *lcd, int mode)
+{
+ switch (mode) {
+ case MODE_VGA:
+ tdo24m_writes(lcd, lcd_vga_pass_through);
+ tdo24m_writes(lcd, lcd_panel_config);
+ tdo24m_writes(lcd, lcd_vga_transfer);
+ break;
+ case MODE_QVGA:
+ tdo24m_writes(lcd, lcd_qvga_pass_through);
+ tdo24m_writes(lcd, lcd_panel_config);
+ tdo24m_writes(lcd, lcd_qvga_transfer);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ lcd->mode = mode;
+ return 0;
+}
+
+static int tdo24m_power_on(struct tdo24m *lcd)
+{
+ int err;
+
+ err = tdo24m_writes(lcd, lcd_panel_on);
+ if (err)
+ goto out;
+
+ err = tdo24m_writes(lcd, lcd_panel_reset);
+ if (err)
+ goto out;
+
+ err = tdo24m_adj_mode(lcd, lcd->mode);
+out:
+ return err;
+}
+
+static int tdo24m_power_off(struct tdo24m *lcd)
+{
+ return tdo24m_writes(lcd, lcd_panel_off);
+}
+
+static int tdo24m_power(struct tdo24m *lcd, int power)
+{
+ int ret = 0;
+
+ if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power))
+ ret = tdo24m_power_on(lcd);
+ else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power))
+ ret = tdo24m_power_off(lcd);
+
+ if (!ret)
+ lcd->power = power;
+
+ return ret;
+}
+
+
+static int tdo24m_set_power(struct lcd_device *ld, int power)
+{
+ struct tdo24m *lcd = lcd_get_data(ld);
+ return tdo24m_power(lcd, power);
+}
+
+static int tdo24m_get_power(struct lcd_device *ld)
+{
+ struct tdo24m *lcd = lcd_get_data(ld);
+ return lcd->power;
+}
+
+static int tdo24m_set_mode(struct lcd_device *ld, struct fb_videomode *m)
+{
+ struct tdo24m *lcd = lcd_get_data(ld);
+ int mode = MODE_QVGA;
+
+ if (m->xres == 640 || m->xres == 480)
+ mode = MODE_VGA;
+
+ if (lcd->mode == mode)
+ return 0;
+
+ return tdo24m_adj_mode(lcd, mode);
+}
+
+static struct lcd_ops tdo24m_ops = {
+ .get_power = tdo24m_get_power,
+ .set_power = tdo24m_set_power,
+ .set_mode = tdo24m_set_mode,
+};
+
+static int __devinit tdo24m_probe(struct spi_device *spi)
+{
+ struct tdo24m *lcd;
+ struct spi_message *m;
+ struct spi_transfer *x;
+ int err;
+
+ spi->bits_per_word = 8;
+ spi->mode = SPI_MODE_3;
+ err = spi_setup(spi);
+ if (err)
+ return err;
+
+ lcd = kzalloc(sizeof(struct tdo24m), GFP_KERNEL);
+ if (!lcd)
+ return -ENOMEM;
+
+ lcd->spi_dev = spi;
+ lcd->power = FB_BLANK_POWERDOWN;
+ lcd->mode = MODE_VGA; /* default to VGA */
+
+ lcd->buf = kmalloc(TDO24M_SPI_BUFF_SIZE, sizeof(GFP_KERNEL));
+ if (lcd->buf == NULL) {
+ kfree(lcd);
+ return -ENOMEM;
+ }
+
+ m = &lcd->msg;
+ x = &lcd->xfer;
+
+ spi_message_init(m);
+
+ x->tx_buf = &lcd->buf[0];
+ spi_message_add_tail(x, m);
+
+ lcd->lcd_dev = lcd_device_register("tdo24m", &spi->dev,
+ lcd, &tdo24m_ops);
+ if (IS_ERR(lcd->lcd_dev)) {
+ err = PTR_ERR(lcd->lcd_dev);
+ goto out_free;
+ }
+
+ dev_set_drvdata(&spi->dev, lcd);
+ err = tdo24m_power(lcd, FB_BLANK_UNBLANK);
+ if (err)
+ goto out_unregister;
+
+ return 0;
+
+out_unregister:
+ lcd_device_unregister(lcd->lcd_dev);
+out_free:
+ kfree(lcd->buf);
+ kfree(lcd);
+ return err;
+}
+
+static int __devexit tdo24m_remove(struct spi_device *spi)
+{
+ struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
+
+ tdo24m_power(lcd, FB_BLANK_POWERDOWN);
+ lcd_device_unregister(lcd->lcd_dev);
+ kfree(lcd->buf);
+ kfree(lcd);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int tdo24m_suspend(struct spi_device *spi, pm_message_t state)
+{
+ struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
+
+ return tdo24m_power(lcd, FB_BLANK_POWERDOWN);
+}
+
+static int tdo24m_resume(struct spi_device *spi)
+{
+ struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
+
+ return tdo24m_power(lcd, FB_BLANK_UNBLANK);
+}
+#else
+#define tdo24m_suspend NULL
+#define tdo24m_resume NULL
+#endif
+
+/* Power down all displays on reboot, poweroff or halt */
+static void tdo24m_shutdown(struct spi_device *spi)
+{
+ struct tdo24m *lcd = dev_get_drvdata(&spi->dev);
+
+ tdo24m_power(lcd, FB_BLANK_POWERDOWN);
+}
+
+static struct spi_driver tdo24m_driver = {
+ .driver = {
+ .name = "tdo24m",
+ .owner = THIS_MODULE,
+ },
+ .probe = tdo24m_probe,
+ .remove = __devexit_p(tdo24m_remove),
+ .shutdown = tdo24m_shutdown,
+ .suspend = tdo24m_suspend,
+ .resume = tdo24m_resume,
+};
+
+static int __init tdo24m_init(void)
+{
+ return spi_register_driver(&tdo24m_driver);
+}
+module_init(tdo24m_init);
+
+static void __exit tdo24m_exit(void)
+{
+ spi_unregister_driver(&tdo24m_driver);
+}
+module_exit(tdo24m_exit);
+
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_DESCRIPTION("Driver for Toppoly TDO24M LCD Panel");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 98843c2ecf73..0737570030f5 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -979,6 +979,7 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
info->flags &= ~FBINFO_MISC_USEREVENT;
event.info = info;
+ event.data = &mode;
fb_notifier_call_chain(evnt, &event);
}
}
diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c
index cc4c038a1b3f..afeed0611e3e 100644
--- a/drivers/video/metronomefb.c
+++ b/drivers/video/metronomefb.c
@@ -40,29 +40,63 @@
#include <asm/unaligned.h>
-
-#define DEBUG 1
-#ifdef DEBUG
-#define DPRINTK(f, a...) printk(KERN_DEBUG "%s: " f, __func__ , ## a)
-#else
-#define DPRINTK(f, a...)
-#endif
-
-
/* Display specific information */
#define DPY_W 832
#define DPY_H 622
+static int user_wfm_size;
+
/* frame differs from image. frame includes non-visible pixels */
struct epd_frame {
int fw; /* frame width */
int fh; /* frame height */
+ u16 config[4];
+ int wfm_size;
};
static struct epd_frame epd_frame_table[] = {
{
- .fw = 832,
- .fh = 622
+ .fw = 832,
+ .fh = 622,
+ .config = {
+ 15 /* sdlew */
+ | 2 << 8 /* sdosz */
+ | 0 << 11 /* sdor */
+ | 0 << 12 /* sdces */
+ | 0 << 15, /* sdcer */
+ 42 /* gdspl */
+ | 1 << 8 /* gdr1 */
+ | 1 << 9 /* sdshr */
+ | 0 << 15, /* gdspp */
+ 18 /* gdspw */
+ | 0 << 15, /* dispc */
+ 599 /* vdlc */
+ | 0 << 11 /* dsi */
+ | 0 << 12, /* dsic */
+ },
+ .wfm_size = 47001,
+ },
+ {
+ .fw = 1088,
+ .fh = 791,
+ .config = {
+ 0x0104,
+ 0x031f,
+ 0x0088,
+ 0x02ff,
+ },
+ .wfm_size = 46770,
+ },
+ {
+ .fw = 1200,
+ .fh = 842,
+ .config = {
+ 0x0101,
+ 0x030e,
+ 0x0012,
+ 0x0280,
+ },
+ .wfm_size = 46770,
},
};
@@ -134,9 +168,8 @@ static u16 calc_img_cksum(u16 *start, int length)
}
/* here we decode the incoming waveform file and populate metromem */
-#define EXP_WFORM_SIZE 47001
-static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
- u8 *frame_count)
+static int __devinit load_waveform(u8 *mem, size_t size, int m, int t,
+ struct metronomefb_par *par)
{
int tta;
int wmta;
@@ -148,26 +181,31 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
int wfm_idx, owfm_idx;
int mem_idx = 0;
struct waveform_hdr *wfm_hdr;
+ u8 *metromem = par->metromem_wfm;
+ struct device *dev = par->info->dev;
- if (size != EXP_WFORM_SIZE) {
- printk(KERN_ERR "Error: unexpected size %d != %d\n", size,
- EXP_WFORM_SIZE);
+ if (user_wfm_size)
+ epd_frame_table[par->dt].wfm_size = user_wfm_size;
+
+ if (size != epd_frame_table[par->dt].wfm_size) {
+ dev_err(dev, "Error: unexpected size %d != %d\n", size,
+ epd_frame_table[par->dt].wfm_size);
return -EINVAL;
}
wfm_hdr = (struct waveform_hdr *) mem;
if (wfm_hdr->fvsn != 1) {
- printk(KERN_ERR "Error: bad fvsn %x\n", wfm_hdr->fvsn);
+ dev_err(dev, "Error: bad fvsn %x\n", wfm_hdr->fvsn);
return -EINVAL;
}
if (wfm_hdr->luts != 0) {
- printk(KERN_ERR "Error: bad luts %x\n", wfm_hdr->luts);
+ dev_err(dev, "Error: bad luts %x\n", wfm_hdr->luts);
return -EINVAL;
}
cksum = calc_cksum(32, 47, mem);
if (cksum != wfm_hdr->wfm_cs) {
- printk(KERN_ERR "Error: bad cksum %x != %x\n", cksum,
+ dev_err(dev, "Error: bad cksum %x != %x\n", cksum,
wfm_hdr->wfm_cs);
return -EINVAL;
}
@@ -175,7 +213,7 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
wfm_hdr->trc += 1;
for (i = 0; i < 5; i++) {
if (*(wfm_hdr->stuff2a + i) != 0) {
- printk(KERN_ERR "Error: unexpected value in padding\n");
+ dev_err(dev, "Error: unexpected value in padding\n");
return -EINVAL;
}
}
@@ -200,7 +238,7 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
return -EINVAL;
cksum = calc_cksum(sizeof(*wfm_hdr), cksum_idx, mem);
if (cksum != mem[cksum_idx]) {
- printk(KERN_ERR "Error: bad temperature range table cksum"
+ dev_err(dev, "Error: bad temperature range table cksum"
" %x != %x\n", cksum, mem[cksum_idx]);
return -EINVAL;
}
@@ -212,7 +250,7 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
return -EINVAL;
cksum = calc_cksum(cksum_idx - 3, cksum_idx, mem);
if (cksum != mem[cksum_idx]) {
- printk(KERN_ERR "Error: bad mode table address cksum"
+ dev_err(dev, "Error: bad mode table address cksum"
" %x != %x\n", cksum, mem[cksum_idx]);
return -EINVAL;
}
@@ -224,7 +262,7 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
return -EINVAL;
cksum = calc_cksum(cksum_idx - 3, cksum_idx, mem);
if (cksum != mem[cksum_idx]) {
- printk(KERN_ERR "Error: bad temperature table address cksum"
+ dev_err(dev, "Error: bad temperature table address cksum"
" %x != %x\n", cksum, mem[cksum_idx]);
return -EINVAL;
}
@@ -259,11 +297,11 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t,
return -EINVAL;
cksum = calc_cksum(owfm_idx, cksum_idx, mem);
if (cksum != mem[cksum_idx]) {
- printk(KERN_ERR "Error: bad waveform data cksum"
+ dev_err(dev, "Error: bad waveform data cksum"
" %x != %x\n", cksum, mem[cksum_idx]);
return -EINVAL;
}
- *frame_count = (mem_idx/64);
+ par->frame_count = (mem_idx/64);
return 0;
}
@@ -274,15 +312,12 @@ static int metronome_display_cmd(struct metronomefb_par *par)
u16 cs;
u16 opcode;
static u8 borderval;
- u8 *ptr;
/* setup display command
we can't immediately set the opcode since the controller
will try parse the command before we've set it all up
so we just set cs here and set the opcode at the end */
- ptr = par->metromem;
-
if (par->metromem_cmd->opcode == 0xCC40)
opcode = cs = 0xCC41;
else
@@ -335,44 +370,17 @@ static int __devinit metronome_powerup_cmd(struct metronomefb_par *par)
static int __devinit metronome_config_cmd(struct metronomefb_par *par)
{
- int i;
- u16 cs;
-
/* setup config command
we can't immediately set the opcode since the controller
- will try parse the command before we've set it all up
- so we just set cs here and set the opcode at the end */
-
- cs = 0xCC10;
-
- /* set the 12 args ( 8 bytes ) for config. see spec for meanings */
- i = 0;
- par->metromem_cmd->args[i] = 15 /* sdlew */
- | 2 << 8 /* sdosz */
- | 0 << 11 /* sdor */
- | 0 << 12 /* sdces */
- | 0 << 15; /* sdcer */
- cs += par->metromem_cmd->args[i++];
-
- par->metromem_cmd->args[i] = 42 /* gdspl */
- | 1 << 8 /* gdr1 */
- | 1 << 9 /* sdshr */
- | 0 << 15; /* gdspp */
- cs += par->metromem_cmd->args[i++];
-
- par->metromem_cmd->args[i] = 18 /* gdspw */
- | 0 << 15; /* dispc */
- cs += par->metromem_cmd->args[i++];
-
- par->metromem_cmd->args[i] = 599 /* vdlc */
- | 0 << 11 /* dsi */
- | 0 << 12; /* dsic */
- cs += par->metromem_cmd->args[i++];
+ will try parse the command before we've set it all up */
+ memcpy(par->metromem_cmd->args, epd_frame_table[par->dt].config,
+ sizeof(epd_frame_table[par->dt].config));
/* the rest are 0 */
- memset((u8 *) (par->metromem_cmd->args + i), 0, (32-i)*2);
+ memset((u8 *) (par->metromem_cmd->args + 4), 0, (32-4)*2);
- par->metromem_cmd->csum = cs;
+ par->metromem_cmd->csum = 0xCC10;
+ par->metromem_cmd->csum += calc_img_cksum(par->metromem_cmd->args, 4);
par->metromem_cmd->opcode = 0xCC10; /* config cmd */
return par->board->met_wait_event(par);
@@ -408,12 +416,9 @@ static int __devinit metronome_init_regs(struct metronomefb_par *par)
{
int res;
- par->board->init_gpio_regs(par);
-
- par->board->init_lcdc_regs(par);
-
- /* now that lcd is setup, setup dma descriptor */
- par->board->post_dma_setup(par);
+ res = par->board->setup_io(par);
+ if (res)
+ return res;
res = metronome_powerup_cmd(par);
if (res)
@@ -430,16 +435,16 @@ static int __devinit metronome_init_regs(struct metronomefb_par *par)
static void metronomefb_dpy_update(struct metronomefb_par *par)
{
+ int fbsize;
u16 cksum;
unsigned char *buf = (unsigned char __force *)par->info->screen_base;
+ fbsize = par->info->fix.smem_len;
/* copy from vm to metromem */
- memcpy(par->metromem_img, buf, DPY_W*DPY_H);
+ memcpy(par->metromem_img, buf, fbsize);
- cksum = calc_img_cksum((u16 *) par->metromem_img,
- (epd_frame_table[0].fw * DPY_H)/2);
- *((u16 *)(par->metromem_img) +
- (epd_frame_table[0].fw * DPY_H)/2) = cksum;
+ cksum = calc_img_cksum((u16 *) par->metromem_img, fbsize/2);
+ *((u16 *)(par->metromem_img) + fbsize/2) = cksum;
metronome_display_cmd(par);
}
@@ -574,8 +579,10 @@ static int __devinit metronomefb_probe(struct platform_device *dev)
unsigned char *videomemory;
struct metronomefb_par *par;
const struct firmware *fw_entry;
- int cmd_size, wfm_size, img_size, padding_size, totalsize;
int i;
+ int panel_type;
+ int fw, fh;
+ int epd_dt_index;
/* pick up board specific routines */
board = dev->dev.platform_data;
@@ -586,96 +593,108 @@ static int __devinit metronomefb_probe(struct platform_device *dev)
if (!try_module_get(board->owner))
return -ENODEV;
+ info = framebuffer_alloc(sizeof(struct metronomefb_par), &dev->dev);
+ if (!info)
+ goto err;
+
/* we have two blocks of memory.
info->screen_base which is vm, and is the fb used by apps.
par->metromem which is physically contiguous memory and
contains the display controller commands, waveform,
processed image data and padding. this is the data pulled
- by the device's LCD controller and pushed to Metronome */
+ by the device's LCD controller and pushed to Metronome.
+ the metromem memory is allocated by the board driver and
+ is provided to us */
+
+ panel_type = board->get_panel_type();
+ switch (panel_type) {
+ case 6:
+ epd_dt_index = 0;
+ break;
+ case 8:
+ epd_dt_index = 1;
+ break;
+ case 97:
+ epd_dt_index = 2;
+ break;
+ default:
+ dev_err(&dev->dev, "Unexpected panel type. Defaulting to 6\n");
+ epd_dt_index = 0;
+ break;
+ }
+
+ fw = epd_frame_table[epd_dt_index].fw;
+ fh = epd_frame_table[epd_dt_index].fh;
- videomemorysize = (DPY_W*DPY_H);
+ /* we need to add a spare page because our csum caching scheme walks
+ * to the end of the page */
+ videomemorysize = PAGE_SIZE + (fw * fh);
videomemory = vmalloc(videomemorysize);
if (!videomemory)
- return -ENOMEM;
+ goto err_fb_rel;
memset(videomemory, 0, videomemorysize);
- info = framebuffer_alloc(sizeof(struct metronomefb_par), &dev->dev);
- if (!info)
- goto err_vfree;
-
info->screen_base = (char __force __iomem *)videomemory;
info->fbops = &metronomefb_ops;
+ metronomefb_fix.line_length = fw;
+ metronomefb_var.xres = fw;
+ metronomefb_var.yres = fh;
+ metronomefb_var.xres_virtual = fw;
+ metronomefb_var.yres_virtual = fh;
info->var = metronomefb_var;
info->fix = metronomefb_fix;
info->fix.smem_len = videomemorysize;
par = info->par;
par->info = info;
par->board = board;
+ par->dt = epd_dt_index;
init_waitqueue_head(&par->waitq);
/* this table caches per page csum values. */
par->csum_table = vmalloc(videomemorysize/PAGE_SIZE);
if (!par->csum_table)
+ goto err_vfree;
+
+ /* the physical framebuffer that we use is setup by
+ * the platform device driver. It will provide us
+ * with cmd, wfm and image memory in a contiguous area. */
+ retval = board->setup_fb(par);
+ if (retval) {
+ dev_err(&dev->dev, "Failed to setup fb\n");
goto err_csum_table;
+ }
- /* the metromem buffer is divided as follows:
- command | CRC | padding
- 16kb waveform data | CRC | padding
- image data | CRC
- and an extra 256 bytes for dma descriptors
- eg: IW=832 IH=622 WS=128
- */
-
- cmd_size = 1 * epd_frame_table[0].fw;
- wfm_size = ((16*1024 + 2 + epd_frame_table[0].fw - 1)
- / epd_frame_table[0].fw) * epd_frame_table[0].fw;
- img_size = epd_frame_table[0].fh * epd_frame_table[0].fw;
- padding_size = 4 * epd_frame_table[0].fw;
- totalsize = cmd_size + wfm_size + img_size + padding_size;
- par->metromemsize = PAGE_ALIGN(totalsize + 256);
- DPRINTK("desired memory size = %d\n", par->metromemsize);
- dev->dev.coherent_dma_mask = 0xffffffffull;
- par->metromem = dma_alloc_writecombine(&dev->dev, par->metromemsize,
- &par->metromem_dma, GFP_KERNEL);
- if (!par->metromem) {
- printk(KERN_ERR
- "metronomefb: unable to allocate dma buffer\n");
- goto err_vfree;
+ /* after this point we should have a framebuffer */
+ if ((!par->metromem_wfm) || (!par->metromem_img) ||
+ (!par->metromem_dma)) {
+ dev_err(&dev->dev, "fb access failure\n");
+ retval = -EINVAL;
+ goto err_csum_table;
}
info->fix.smem_start = par->metromem_dma;
- par->metromem_cmd = (struct metromem_cmd *) par->metromem;
- par->metromem_wfm = par->metromem + cmd_size;
- par->metromem_img = par->metromem + cmd_size + wfm_size;
- par->metromem_img_csum = (u16 *) (par->metromem_img +
- (epd_frame_table[0].fw * DPY_H));
- DPRINTK("img offset=0x%x\n", cmd_size + wfm_size);
- par->metromem_desc = (struct metromem_desc *) (par->metromem + cmd_size
- + wfm_size + img_size + padding_size);
- par->metromem_desc_dma = par->metromem_dma + cmd_size + wfm_size
- + img_size + padding_size;
/* load the waveform in. assume mode 3, temp 31 for now
a) request the waveform file from userspace
b) process waveform and decode into metromem */
retval = request_firmware(&fw_entry, "metronome.wbf", &dev->dev);
if (retval < 0) {
- printk(KERN_ERR "metronomefb: couldn't get waveform\n");
- goto err_dma_free;
+ dev_err(&dev->dev, "Failed to get waveform\n");
+ goto err_csum_table;
}
- retval = load_waveform((u8 *) fw_entry->data, fw_entry->size,
- par->metromem_wfm, 3, 31, &par->frame_count);
+ retval = load_waveform((u8 *) fw_entry->data, fw_entry->size, 3, 31,
+ par);
release_firmware(fw_entry);
if (retval < 0) {
- printk(KERN_ERR "metronomefb: couldn't process waveform\n");
- goto err_dma_free;
+ dev_err(&dev->dev, "Failed processing waveform\n");
+ goto err_csum_table;
}
if (board->setup_irq(info))
- goto err_dma_free;
+ goto err_csum_table;
retval = metronome_init_regs(par);
if (retval < 0)
@@ -688,8 +707,8 @@ static int __devinit metronomefb_probe(struct platform_device *dev)
retval = fb_alloc_cmap(&info->cmap, 8, 0);
if (retval < 0) {
- printk(KERN_ERR "Failed to allocate colormap\n");
- goto err_fb_rel;
+ dev_err(&dev->dev, "Failed to allocate colormap\n");
+ goto err_free_irq;
}
/* set cmap */
@@ -704,7 +723,7 @@ static int __devinit metronomefb_probe(struct platform_device *dev)
platform_set_drvdata(dev, info);
- printk(KERN_INFO
+ dev_dbg(&dev->dev,
"fb%d: Metronome frame buffer device, using %dK of video"
" memory\n", info->node, videomemorysize >> 10);
@@ -712,17 +731,15 @@ static int __devinit metronomefb_probe(struct platform_device *dev)
err_cmap:
fb_dealloc_cmap(&info->cmap);
-err_fb_rel:
- framebuffer_release(info);
err_free_irq:
- board->free_irq(info);
-err_dma_free:
- dma_free_writecombine(&dev->dev, par->metromemsize, par->metromem,
- par->metromem_dma);
+ board->cleanup(par);
err_csum_table:
vfree(par->csum_table);
err_vfree:
vfree(videomemory);
+err_fb_rel:
+ framebuffer_release(info);
+err:
module_put(board->owner);
return retval;
}
@@ -733,15 +750,15 @@ static int __devexit metronomefb_remove(struct platform_device *dev)
if (info) {
struct metronomefb_par *par = info->par;
+
+ unregister_framebuffer(info);
fb_deferred_io_cleanup(info);
- dma_free_writecombine(&dev->dev, par->metromemsize,
- par->metromem, par->metromem_dma);
fb_dealloc_cmap(&info->cmap);
+ par->board->cleanup(par);
vfree(par->csum_table);
- unregister_framebuffer(info);
vfree((void __force *)info->screen_base);
- par->board->free_irq(info);
module_put(par->board->owner);
+ dev_dbg(&dev->dev, "calling release\n");
framebuffer_release(info);
}
return 0;
@@ -766,6 +783,9 @@ static void __exit metronomefb_exit(void)
platform_driver_unregister(&metronomefb_driver);
}
+module_param(user_wfm_size, uint, 0);
+MODULE_PARM_DESC(user_wfm_size, "Set custom waveform size");
+
module_init(metronomefb_init);
module_exit(metronomefb_exit);
diff --git a/include/linux/lcd.h b/include/linux/lcd.h
index 173febac6656..c67fecafff90 100644
--- a/include/linux/lcd.h
+++ b/include/linux/lcd.h
@@ -11,6 +11,7 @@
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/notifier.h>
+#include <linux/fb.h>
/* Notes on locking:
*
@@ -45,6 +46,8 @@ struct lcd_ops {
int (*get_contrast)(struct lcd_device *);
/* Set LCD panel contrast */
int (*set_contrast)(struct lcd_device *, int contrast);
+ /* Set LCD panel mode (resolutions ...) */
+ int (*set_mode)(struct lcd_device *, struct fb_videomode *);
/* Check if given framebuffer device is the one LCD is bound to;
return 0 if not, !=0 if it is. If NULL, lcd always matches the fb. */
int (*check_fb)(struct lcd_device *, struct fb_info *);
diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h
index ed25483d25d9..bc21db598c06 100644
--- a/include/linux/smc91x.h
+++ b/include/linux/smc91x.h
@@ -16,6 +16,15 @@
#define SMC91X_USE_DMA (1 << 6)
+#define RPC_LED_100_10 (0x00) /* LED = 100Mbps OR's with 10Mbps link detect */
+#define RPC_LED_RES (0x01) /* LED = Reserved */
+#define RPC_LED_10 (0x02) /* LED = 10Mbps link detect */
+#define RPC_LED_FD (0x03) /* LED = Full Duplex Mode */
+#define RPC_LED_TX_RX (0x04) /* LED = TX or RX packet occurred */
+#define RPC_LED_100 (0x05) /* LED = 100Mbps link dectect */
+#define RPC_LED_TX (0x06) /* LED = TX packet occurred */
+#define RPC_LED_RX (0x07) /* LED = RX packet occurred */
+
struct smc91x_platdata {
unsigned long flags;
unsigned char leda;
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index daf744017a31..05eab2f11e63 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -43,6 +43,9 @@ struct ads7846_platform_data {
u16 debounce_tol; /* tolerance used for filtering */
u16 debounce_rep; /* additional consecutive good readings
* required after the first two */
+ int gpio_pendown; /* the GPIO used to decide the pendown
+ * state if get_pendown_state == NULL
+ */
int (*get_pendown_state)(void);
int (*filter_init) (struct ads7846_platform_data *pdata,
void **filter_data);
diff --git a/include/linux/spi/corgi_lcd.h b/include/linux/spi/corgi_lcd.h
new file mode 100644
index 000000000000..6692b3418ccf
--- /dev/null
+++ b/include/linux/spi/corgi_lcd.h
@@ -0,0 +1,20 @@
+#ifndef __LINUX_SPI_CORGI_LCD_H
+#define __LINUX_SPI_CORGI_LCD_H
+
+#define CORGI_LCD_MODE_QVGA 1
+#define CORGI_LCD_MODE_VGA 2
+
+struct corgi_lcd_platform_data {
+ int init_mode;
+ int max_intensity;
+ int default_intensity;
+ int limit_mask;
+
+ int gpio_backlight_on; /* -1 if n/a */
+ int gpio_backlight_cont; /* -1 if n/a */
+
+ void (*notify)(int intensity);
+ void (*kick_battery)(void);
+};
+
+#endif /* __LINUX_SPI_CORGI_LCD_H */
diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h
new file mode 100644
index 000000000000..970473bf8d5a
--- /dev/null
+++ b/include/linux/ucb1400.h
@@ -0,0 +1,161 @@
+/*
+ * Register definitions and functions for:
+ * Philips UCB1400 driver
+ *
+ * Based on ucb1400_ts:
+ * Author: Nicolas Pitre
+ * Created: September 25, 2006
+ * Copyright: MontaVista Software, Inc.
+ *
+ * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
+ * If something doesnt work and it worked before spliting, e-mail me,
+ * dont bother Nicolas please ;-)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code is heavily based on ucb1x00-*.c copyrighted by Russell King
+ * covering the UCB1100, UCB1200 and UCB1300.. Support for the UCB1400 has
+ * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request.
+ */
+
+#ifndef _LINUX__UCB1400_H
+#define _LINUX__UCB1400_H
+
+#include <sound/ac97_codec.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+/*
+ * UCB1400 AC-link registers
+ */
+
+#define UCB_IO_DATA 0x5a
+#define UCB_IO_DIR 0x5c
+#define UCB_IE_RIS 0x5e
+#define UCB_IE_FAL 0x60
+#define UCB_IE_STATUS 0x62
+#define UCB_IE_CLEAR 0x62
+#define UCB_IE_ADC (1 << 11)
+#define UCB_IE_TSPX (1 << 12)
+
+#define UCB_TS_CR 0x64
+#define UCB_TS_CR_TSMX_POW (1 << 0)
+#define UCB_TS_CR_TSPX_POW (1 << 1)
+#define UCB_TS_CR_TSMY_POW (1 << 2)
+#define UCB_TS_CR_TSPY_POW (1 << 3)
+#define UCB_TS_CR_TSMX_GND (1 << 4)
+#define UCB_TS_CR_TSPX_GND (1 << 5)
+#define UCB_TS_CR_TSMY_GND (1 << 6)
+#define UCB_TS_CR_TSPY_GND (1 << 7)
+#define UCB_TS_CR_MODE_INT (0 << 8)
+#define UCB_TS_CR_MODE_PRES (1 << 8)
+#define UCB_TS_CR_MODE_POS (2 << 8)
+#define UCB_TS_CR_BIAS_ENA (1 << 11)
+#define UCB_TS_CR_TSPX_LOW (1 << 12)
+#define UCB_TS_CR_TSMX_LOW (1 << 13)
+
+#define UCB_ADC_CR 0x66
+#define UCB_ADC_SYNC_ENA (1 << 0)
+#define UCB_ADC_VREFBYP_CON (1 << 1)
+#define UCB_ADC_INP_TSPX (0 << 2)
+#define UCB_ADC_INP_TSMX (1 << 2)
+#define UCB_ADC_INP_TSPY (2 << 2)
+#define UCB_ADC_INP_TSMY (3 << 2)
+#define UCB_ADC_INP_AD0 (4 << 2)
+#define UCB_ADC_INP_AD1 (5 << 2)
+#define UCB_ADC_INP_AD2 (6 << 2)
+#define UCB_ADC_INP_AD3 (7 << 2)
+#define UCB_ADC_EXT_REF (1 << 5)
+#define UCB_ADC_START (1 << 7)
+#define UCB_ADC_ENA (1 << 15)
+
+#define UCB_ADC_DATA 0x68
+#define UCB_ADC_DAT_VALID (1 << 15)
+#define UCB_ADC_DAT_MASK 0x3ff
+
+#define UCB_ID 0x7e
+#define UCB_ID_1400 0x4304
+
+struct ucb1400_ts {
+ struct input_dev *ts_idev;
+ struct task_struct *ts_task;
+ int id;
+ wait_queue_head_t ts_wait;
+ unsigned int ts_restart:1;
+ int irq;
+ unsigned int irq_pending; /* not bit field shared */
+ struct snd_ac97 *ac97;
+};
+
+struct ucb1400 {
+ struct platform_device *ucb1400_ts;
+};
+
+static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg)
+{
+ return ac97->bus->ops->read(ac97, reg);
+}
+
+static inline void ucb1400_reg_write(struct snd_ac97 *ac97, u16 reg, u16 val)
+{
+ ac97->bus->ops->write(ac97, reg, val);
+}
+
+static inline u16 ucb1400_gpio_get_value(struct snd_ac97 *ac97, u16 gpio)
+{
+ return ucb1400_reg_read(ac97, UCB_IO_DATA) & (1 << gpio);
+}
+
+static inline void ucb1400_gpio_set_value(struct snd_ac97 *ac97, u16 gpio,
+ u16 val)
+{
+ ucb1400_reg_write(ac97, UCB_IO_DATA, val ?
+ ucb1400_reg_read(ac97, UCB_IO_DATA) | (1 << gpio) :
+ ucb1400_reg_read(ac97, UCB_IO_DATA) & ~(1 << gpio));
+}
+
+static inline u16 ucb1400_gpio_get_direction(struct snd_ac97 *ac97, u16 gpio)
+{
+ return ucb1400_reg_read(ac97, UCB_IO_DIR) & (1 << gpio);
+}
+
+static inline void ucb1400_gpio_set_direction(struct snd_ac97 *ac97, u16 gpio,
+ u16 dir)
+{
+ ucb1400_reg_write(ac97, UCB_IO_DIR, dir ?
+ ucb1400_reg_read(ac97, UCB_IO_DIR) | (1 << gpio) :
+ ucb1400_reg_read(ac97, UCB_IO_DIR) & ~(1 << gpio));
+}
+
+static inline void ucb1400_adc_enable(struct snd_ac97 *ac97)
+{
+ ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA);
+}
+
+static unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
+ int adcsync)
+{
+ unsigned int val;
+
+ if (adcsync)
+ adc_channel |= UCB_ADC_SYNC_ENA;
+
+ ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA | adc_channel);
+ ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA | adc_channel |
+ UCB_ADC_START);
+
+ while (!((val = ucb1400_reg_read(ac97, UCB_ADC_DATA))
+ & UCB_ADC_DAT_VALID))
+ schedule_timeout_uninterruptible(1);
+
+ return val & UCB_ADC_DAT_MASK;
+}
+
+static inline void ucb1400_adc_disable(struct snd_ac97 *ac97)
+{
+ ucb1400_reg_write(ac97, UCB_ADC_CR, 0);
+}
+
+#endif
diff --git a/include/linux/wm97xx_batt.h b/include/linux/wm97xx_batt.h
new file mode 100644
index 000000000000..9681d1ab0e4f
--- /dev/null
+++ b/include/linux/wm97xx_batt.h
@@ -0,0 +1,26 @@
+#ifndef _LINUX_WM97XX_BAT_H
+#define _LINUX_WM97XX_BAT_H
+
+#include <linux/wm97xx.h>
+
+struct wm97xx_batt_info {
+ int batt_aux;
+ int temp_aux;
+ int charge_gpio;
+ int min_voltage;
+ int max_voltage;
+ int batt_div;
+ int batt_mult;
+ int temp_div;
+ int temp_mult;
+ int batt_tech;
+ char *batt_name;
+};
+
+#ifdef CONFIG_BATTERY_WM97XX
+void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data);
+#else
+static inline void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data) {}
+#endif
+
+#endif
diff --git a/include/video/metronomefb.h b/include/video/metronomefb.h
index dab04b4fad7f..9863f4b6d418 100644
--- a/include/video/metronomefb.h
+++ b/include/video/metronomefb.h
@@ -12,14 +12,6 @@
#ifndef _LINUX_METRONOMEFB_H_
#define _LINUX_METRONOMEFB_H_
-/* address and control descriptors used by metronome controller */
-struct metromem_desc {
- u32 mFDADR0;
- u32 mFSADR0;
- u32 mFIDR0;
- u32 mLDCMD0;
-};
-
/* command structure used by metronome controller */
struct metromem_cmd {
u16 opcode;
@@ -29,34 +21,37 @@ struct metromem_cmd {
/* struct used by metronome. board specific stuff comes from *board */
struct metronomefb_par {
- unsigned char *metromem;
- struct metromem_desc *metromem_desc;
struct metromem_cmd *metromem_cmd;
unsigned char *metromem_wfm;
unsigned char *metromem_img;
u16 *metromem_img_csum;
u16 *csum_table;
- int metromemsize;
dma_addr_t metromem_dma;
- dma_addr_t metromem_desc_dma;
struct fb_info *info;
struct metronome_board *board;
wait_queue_head_t waitq;
u8 frame_count;
+ int extra_size;
+ int dt;
};
-/* board specific routines */
+/* board specific routines and data */
struct metronome_board {
- struct module *owner;
- void (*free_irq)(struct fb_info *);
- void (*init_gpio_regs)(struct metronomefb_par *);
- void (*init_lcdc_regs)(struct metronomefb_par *);
- void (*post_dma_setup)(struct metronomefb_par *);
+ struct module *owner; /* the platform device */
void (*set_rst)(struct metronomefb_par *, int);
void (*set_stdby)(struct metronomefb_par *, int);
+ void (*cleanup)(struct metronomefb_par *);
int (*met_wait_event)(struct metronomefb_par *);
int (*met_wait_event_intr)(struct metronomefb_par *);
int (*setup_irq)(struct fb_info *);
+ int (*setup_fb)(struct metronomefb_par *);
+ int (*setup_io)(struct metronomefb_par *);
+ int (*get_panel_type)(void);
+ unsigned char *metromem;
+ int fw;
+ int fh;
+ int wfm_size;
+ struct fb_info *host_fbinfo; /* the host LCD controller's fbi */
};
#endif
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 199cca3366df..714b3baa4be7 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -215,7 +215,7 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_out = {
.name = "AC97 PCM out",
.dev_addr = __PREG(PCDR),
- .drcmr = &DRCMRTXPCDR,
+ .drcmr = &DRCMR(12),
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST32 | DCMD_WIDTH4,
};
@@ -223,7 +223,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_out = {
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_in = {
.name = "AC97 PCM in",
.dev_addr = __PREG(PCDR),
- .drcmr = &DRCMRRXPCDR,
+ .drcmr = &DRCMR(11),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST32 | DCMD_WIDTH4,
};
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index 0a53f72077fd..fa69faa886ef 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -18,13 +18,13 @@
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <asm/hardware/scoop.h>
#include <mach/pxa-regs.h>
#include <mach/hardware.h>
#include <mach/corgi.h>
@@ -54,8 +54,8 @@ static void corgi_ext_control(struct snd_soc_codec *codec)
switch (corgi_jack_func) {
case CORGI_HP:
/* set = unmute headphone */
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L);
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R);
+ gpio_set_value(CORGI_GPIO_MUTE_L, 1);
+ gpio_set_value(CORGI_GPIO_MUTE_R, 1);
snd_soc_dapm_disable_pin(codec, "Mic Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
snd_soc_dapm_enable_pin(codec, "Headphone Jack");
@@ -63,24 +63,24 @@ static void corgi_ext_control(struct snd_soc_codec *codec)
break;
case CORGI_MIC:
/* reset = mute headphone */
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L);
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R);
+ gpio_set_value(CORGI_GPIO_MUTE_L, 0);
+ gpio_set_value(CORGI_GPIO_MUTE_R, 0);
snd_soc_dapm_enable_pin(codec, "Mic Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
snd_soc_dapm_disable_pin(codec, "Headphone Jack");
snd_soc_dapm_disable_pin(codec, "Headset Jack");
break;
case CORGI_LINE:
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L);
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R);
+ gpio_set_value(CORGI_GPIO_MUTE_L, 0);
+ gpio_set_value(CORGI_GPIO_MUTE_R, 0);
snd_soc_dapm_disable_pin(codec, "Mic Jack");
snd_soc_dapm_enable_pin(codec, "Line Jack");
snd_soc_dapm_disable_pin(codec, "Headphone Jack");
snd_soc_dapm_disable_pin(codec, "Headset Jack");
break;
case CORGI_HEADSET:
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L);
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R);
+ gpio_set_value(CORGI_GPIO_MUTE_L, 0);
+ gpio_set_value(CORGI_GPIO_MUTE_R, 1);
snd_soc_dapm_enable_pin(codec, "Mic Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
snd_soc_dapm_disable_pin(codec, "Headphone Jack");
@@ -114,8 +114,8 @@ static int corgi_shutdown(struct snd_pcm_substream *substream)
struct snd_soc_codec *codec = rtd->socdev->codec;
/* set = unmute headphone */
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L);
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R);
+ gpio_set_value(CORGI_GPIO_MUTE_L, 1);
+ gpio_set_value(CORGI_GPIO_MUTE_R, 1);
return 0;
}
@@ -218,22 +218,14 @@ static int corgi_set_spk(struct snd_kcontrol *kcontrol,
static int corgi_amp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
- if (SND_SOC_DAPM_EVENT_ON(event))
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON);
- else
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON);
-
+ gpio_set_value(CORGI_GPIO_APM_ON, SND_SOC_DAPM_EVENT_ON(event));
return 0;
}
static int corgi_mic_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
- if (SND_SOC_DAPM_EVENT_ON(event))
- set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MIC_BIAS);
- else
- reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MIC_BIAS);
-
+ gpio_set_value(CORGI_GPIO_MIC_BIAS, SND_SOC_DAPM_EVENT_ON(event));
return 0;
}
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index d94a495bd6bd..ac8f227bab0b 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -244,7 +244,7 @@ struct snd_ac97_bus_ops soc_ac97_ops = {
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_out = {
.name = "AC97 PCM Stereo out",
.dev_addr = __PREG(PCDR),
- .drcmr = &DRCMRTXPCDR,
+ .drcmr = &DRCMR(12),
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST32 | DCMD_WIDTH4,
};
@@ -252,7 +252,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_out = {
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_in = {
.name = "AC97 PCM Stereo in",
.dev_addr = __PREG(PCDR),
- .drcmr = &DRCMRRXPCDR,
+ .drcmr = &DRCMR(11),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST32 | DCMD_WIDTH4,
};
@@ -260,7 +260,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_in = {
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_out = {
.name = "AC97 Aux PCM (Slot 5) Mono out",
.dev_addr = __PREG(MODR),
- .drcmr = &DRCMRTXMODR,
+ .drcmr = &DRCMR(10),
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST16 | DCMD_WIDTH2,
};
@@ -268,7 +268,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_out = {
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_in = {
.name = "AC97 Aux PCM (Slot 5) Mono in",
.dev_addr = __PREG(MODR),
- .drcmr = &DRCMRRXMODR,
+ .drcmr = &DRCMR(9),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST16 | DCMD_WIDTH2,
};
@@ -276,7 +276,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_in = {
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_mic_mono_in = {
.name = "AC97 Mic PCM (Slot 6) Mono in",
.dev_addr = __PREG(MCDR),
- .drcmr = &DRCMRRXMCDR,
+ .drcmr = &DRCMR(8),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST16 | DCMD_WIDTH2,
};
@@ -293,14 +293,6 @@ static int pxa2xx_ac97_suspend(struct platform_device *pdev,
static int pxa2xx_ac97_resume(struct platform_device *pdev,
struct snd_soc_dai *dai)
{
- pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
- pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
- pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
- pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
-#ifdef CONFIG_PXA27x
- /* Use GPIO 113 as AC97 Reset on Bulverde */
- pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
-#endif
clk_enable(ac97_clk);
return 0;
}
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index c796b1882776..ad4c31ddb3d4 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -30,6 +30,46 @@
#include "pxa2xx-pcm.h"
#include "pxa2xx-i2s.h"
+/*
+ * I2S Controller Register and Bit Definitions
+ */
+#define SACR0 __REG(0x40400000) /* Global Control Register */
+#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */
+#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
+#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */
+#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */
+#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */
+#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */
+
+#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */
+#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */
+#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */
+#define SACR0_BCKD (1 << 2) /* Bit Clock Direction */
+#define SACR0_ENB (1 << 0) /* Enable I2S Link */
+#define SACR1_ENLBF (1 << 5) /* Enable Loopback */
+#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */
+#define SACR1_DREC (1 << 3) /* Disable Recording Function */
+#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */
+
+#define SASR0_I2SOFF (1 << 7) /* Controller Status */
+#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */
+#define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */
+#define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */
+#define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */
+#define SASR0_BSY (1 << 2) /* I2S Busy */
+#define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */
+#define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */
+
+#define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */
+#define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */
+
+#define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */
+#define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */
+#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */
+#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */
+
struct pxa_i2s_port {
u32 sadiv;
u32 sacr0;
@@ -44,7 +84,7 @@ static struct clk *clk_i2s;
static struct pxa2xx_pcm_dma_params pxa2xx_i2s_pcm_stereo_out = {
.name = "I2S PCM Stereo out",
.dev_addr = __PREG(SADR),
- .drcmr = &DRCMRTXSADR,
+ .drcmr = &DRCMR(3),
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST32 | DCMD_WIDTH4,
};
@@ -52,7 +92,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_i2s_pcm_stereo_out = {
static struct pxa2xx_pcm_dma_params pxa2xx_i2s_pcm_stereo_in = {
.name = "I2S PCM Stereo in",
.dev_addr = __PREG(SADR),
- .drcmr = &DRCMRRXSADR,
+ .drcmr = &DRCMR(2),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST32 | DCMD_WIDTH4,
};
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index 37cb768fc933..b89a3edd2183 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -19,16 +19,15 @@
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
-#include <asm/hardware/scoop.h>
#include <mach/pxa-regs.h>
#include <mach/hardware.h>
-#include <mach/akita.h>
#include <mach/spitz.h>
#include "../codecs/wm8750.h"
#include "pxa2xx-pcm.h"
@@ -63,8 +62,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
snd_soc_dapm_disable_pin(codec, "Mic Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
snd_soc_dapm_enable_pin(codec, "Headphone Jack");
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+ gpio_set_value(SPITZ_GPIO_MUTE_L, 1);
+ gpio_set_value(SPITZ_GPIO_MUTE_R, 1);
break;
case SPITZ_MIC:
/* enable mic jack and bias, mute hp */
@@ -72,8 +71,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
snd_soc_dapm_disable_pin(codec, "Headset Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
snd_soc_dapm_enable_pin(codec, "Mic Jack");
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+ gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
+ gpio_set_value(SPITZ_GPIO_MUTE_R, 0);
break;
case SPITZ_LINE:
/* enable line jack, disable mic bias and mute hp */
@@ -81,8 +80,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
snd_soc_dapm_disable_pin(codec, "Headset Jack");
snd_soc_dapm_disable_pin(codec, "Mic Jack");
snd_soc_dapm_enable_pin(codec, "Line Jack");
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+ gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
+ gpio_set_value(SPITZ_GPIO_MUTE_R, 0);
break;
case SPITZ_HEADSET:
/* enable and unmute headset jack enable mic bias, mute L hp */
@@ -90,8 +89,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
snd_soc_dapm_enable_pin(codec, "Mic Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
snd_soc_dapm_enable_pin(codec, "Headset Jack");
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
- set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+ gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
+ gpio_set_value(SPITZ_GPIO_MUTE_R, 1);
break;
case SPITZ_HP_OFF:
@@ -100,8 +99,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec)
snd_soc_dapm_disable_pin(codec, "Headset Jack");
snd_soc_dapm_disable_pin(codec, "Mic Jack");
snd_soc_dapm_disable_pin(codec, "Line Jack");
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L);
- reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R);
+ gpio_set_value(SPITZ_GPIO_MUTE_L, 0);
+ gpio_set_value(SPITZ_GPIO_MUTE_R, 0);
break;
}
snd_soc_dapm_sync(codec);
@@ -215,23 +214,14 @@ static int spitz_set_spk(struct snd_kcontrol *kcontrol,
static int spitz_mic_bias(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
- if (machine_is_borzoi() || machine_is_spitz()) {
- if (SND_SOC_DAPM_EVENT_ON(event))
- set_scoop_gpio(&spitzscoop2_device.dev,
- SPITZ_SCP2_MIC_BIAS);
- else
- reset_scoop_gpio(&spitzscoop2_device.dev,
- SPITZ_SCP2_MIC_BIAS);
- }
+ if (machine_is_borzoi() || machine_is_spitz())
+ gpio_set_value(SPITZ_GPIO_MIC_BIAS,
+ SND_SOC_DAPM_EVENT_ON(event));
+
+ if (machine_is_akita())
+ gpio_set_value(AKITA_GPIO_MIC_BIAS,
+ SND_SOC_DAPM_EVENT_ON(event));
- if (machine_is_akita()) {
- if (SND_SOC_DAPM_EVENT_ON(event))
- akita_set_ioexp(&akitaioexp_device.dev,
- AKITA_IOEXP_MIC_BIAS);
- else
- akita_reset_ioexp(&akitaioexp_device.dev,
- AKITA_IOEXP_MIC_BIAS);
- }
return 0;
}