diff options
539 files changed, 9790 insertions, 24883 deletions
diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX index 91c24a1e8a9e..36420e116c90 100644 --- a/Documentation/arm/00-INDEX +++ b/Documentation/arm/00-INDEX @@ -4,8 +4,6 @@ Booting - requirements for booting Interrupts - ARM Interrupt subsystem documentation -IXP2000 - - Release Notes for Linux on Intel's IXP2000 Network Processor msm - MSM specific documentation Netwinder diff --git a/Documentation/arm/IXP2000 b/Documentation/arm/IXP2000 deleted file mode 100644 index 68d21d92a30b..000000000000 --- a/Documentation/arm/IXP2000 +++ /dev/null @@ -1,69 +0,0 @@ - -------------------------------------------------------------------------- -Release Notes for Linux on Intel's IXP2000 Network Processor - -Maintained by Deepak Saxena <dsaxena@plexity.net> -------------------------------------------------------------------------- - -1. Overview - -Intel's IXP2000 family of NPUs (IXP2400, IXP2800, IXP2850) is designed -for high-performance network applications such high-availability -telecom systems. In addition to an XScale core, it contains up to 8 -"MicroEngines" that run special code, several high-end networking -interfaces (UTOPIA, SPI, etc), a PCI host bridge, one serial port, -flash interface, and some other odds and ends. For more information, see: - -http://developer.intel.com - -2. Linux Support - -Linux currently supports the following features on the IXP2000 NPUs: - -- On-chip serial -- PCI -- Flash (MTD/JFFS2) -- I2C through GPIO -- Timers (watchdog, OS) - -That is about all we can support under Linux ATM b/c the core networking -components of the chip are accessed via Intel's closed source SDK. -Please contact Intel directly on issues with using those. There is -also a mailing list run by some folks at Princeton University that might -be of help: https://lists.cs.princeton.edu/mailman/listinfo/ixp2xxx - -WHATEVER YOU DO, DO NOT POST EMAIL TO THE LINUX-ARM OR LINUX-ARM-KERNEL -MAILING LISTS REGARDING THE INTEL SDK. - -3. Supported Platforms - -- Intel IXDP2400 Reference Platform -- Intel IXDP2800 Reference Platform -- Intel IXDP2401 Reference Platform -- Intel IXDP2801 Reference Platform -- RadiSys ENP-2611 - -4. Usage Notes - -- The IXP2000 platforms usually have rather complex PCI bus topologies - with large memory space requirements. In addition, b/c of the way the - Intel SDK is designed, devices are enumerated in a very specific - way. B/c of this this, we use "pci=firmware" option in the kernel - command line so that we do not re-enumerate the bus. - -- IXDP2x01 systems have variable clock tick rates that we cannot determine - via HW registers. The "ixdp2x01_clk=XXX" cmd line options allow you - to pass the clock rate to the board port. - -5. Thanks - -The IXP2000 work has been funded by Intel Corp. and MontaVista Software, Inc. - -The following people have contributed patches/comments/etc: - -Naeem F. Afzal -Lennert Buytenhek -Jeffrey Daly - -------------------------------------------------------------------------- -Last Update: 8/09/2004 diff --git a/Documentation/devicetree/bindings/ata/calxeda-sata.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index 79caa5651f53..8bb8a76d42e8 100644 --- a/Documentation/devicetree/bindings/ata/calxeda-sata.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -1,10 +1,10 @@ -* Calxeda SATA Controller +* AHCI SATA Controller SATA nodes are defined to describe on-chip Serial ATA controllers. Each SATA controller should have its own node. Required properties: -- compatible : compatible list, contains "calxeda,hb-ahci" +- compatible : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci" - interrupts : <interrupt mapping for SATA IRQ> - reg : <registers mapping> @@ -14,4 +14,3 @@ Example: reg = <0xffe08000 0x1000>; interrupts = <115>; }; - diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 2c3cd413f042..9cc44449508d 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -3,6 +3,8 @@ Required properties: - compatible : "fsl,sgtl5000". +- reg : the I2C address of the device + Example: codec: sgtl5000@0a { diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index bd80ba5847d2..1619a8c80873 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -147,7 +147,7 @@ tcp_adv_win_scale - INTEGER (if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale), if it is <= 0. Possible values are [-31, 31], inclusive. - Default: 2 + Default: 1 tcp_allowed_congestion_control - STRING Show/set the congestion control choices available to non-privileged @@ -410,7 +410,7 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max net.core.rmem_max. Calling setsockopt() with SO_RCVBUF disables automatic tuning of that socket's receive buffer size, in which case this value is ignored. - Default: between 87380B and 4MB, depending on RAM size. + Default: between 87380B and 6MB, depending on RAM size. tcp_sack - BOOLEAN Enable select acknowledgments (SACKS). diff --git a/MAINTAINERS b/MAINTAINERS index bb76fc42fc42..101c1b7d8f00 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -640,13 +640,6 @@ S: Maintained F: drivers/amba/ F: include/linux/amba/bus.h -ARM/ADI ROADRUNNER MACHINE SUPPORT -M: Lennert Buytenhek <kernel@wantstofly.org> -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained -F: arch/arm/mach-ixp23xx/ -F: arch/arm/mach-ixp23xx/include/mach/ - ARM/ADS SPHERE MACHINE SUPPORT M: Lennert Buytenhek <kernel@wantstofly.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -859,21 +852,11 @@ M: Dan Williams <dan.j.williams@intel.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -ARM/INTEL IXP2000 ARM ARCHITECTURE -M: Lennert Buytenhek <kernel@wantstofly.org> -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained - ARM/INTEL IXDP2850 MACHINE SUPPORT M: Lennert Buytenhek <kernel@wantstofly.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -ARM/INTEL IXP23XX ARM ARCHITECTURE -M: Lennert Buytenhek <kernel@wantstofly.org> -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained - ARM/INTEL IXP4XX ARM ARCHITECTURE M: Imre Kaloz <kaloz@openwrt.org> M: Krzysztof Halasa <khc@pm.waw.pl> @@ -1968,10 +1951,7 @@ S: Maintained F: drivers/net/ethernet/ti/cpmac.c CPU FREQUENCY DRIVERS -M: Dave Jones <davej@redhat.com> L: cpufreq@vger.kernel.org -W: http://www.codemonkey.org.uk/projects/cpufreq/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git S: Maintained F: drivers/cpufreq/ F: include/linux/cpufreq.h @@ -5892,11 +5872,11 @@ F: Documentation/scsi/st.txt F: drivers/scsi/st* SCTP PROTOCOL -M: Vlad Yasevich <vladislav.yasevich@hp.com> +M: Vlad Yasevich <vyasevich@gmail.com> M: Sridhar Samudrala <sri@us.ibm.com> L: linux-sctp@vger.kernel.org W: http://lksctp.sourceforge.net -S: Supported +S: Maintained F: Documentation/networking/sctp.txt F: include/linux/sctp.h F: include/net/sctp/ @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 4 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Saber-toothed Squirrel # *DOCUMENTATION* diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 56a4df952fb0..22e58a99f38b 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -477,7 +477,7 @@ config ALPHA_BROKEN_IRQ_MASK config VGA_HOSE bool - depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI + depends on VGA_CONSOLE && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI) default y help Support VGA on an arbitrary hose; needed for several platforms diff --git a/arch/alpha/include/asm/rtc.h b/arch/alpha/include/asm/rtc.h index 1f7fba671ae6..d70408d36677 100644 --- a/arch/alpha/include/asm/rtc.h +++ b/arch/alpha/include/asm/rtc.h @@ -1,14 +1,10 @@ #ifndef _ALPHA_RTC_H #define _ALPHA_RTC_H -#if defined(CONFIG_ALPHA_GENERIC) +#if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP) \ + || defined(CONFIG_ALPHA_GENERIC) # define get_rtc_time alpha_mv.rtc_get_time # define set_rtc_time alpha_mv.rtc_set_time -#else -# if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP) -# define get_rtc_time marvel_get_rtc_time -# define set_rtc_time marvel_set_rtc_time -# endif #endif #include <asm-generic/rtc.h> diff --git a/arch/alpha/kernel/core_tsunami.c b/arch/alpha/kernel/core_tsunami.c index 5e7c28f92f19..61893d7bdda5 100644 --- a/arch/alpha/kernel/core_tsunami.c +++ b/arch/alpha/kernel/core_tsunami.c @@ -11,6 +11,7 @@ #include <asm/core_tsunami.h> #undef __EXTERN_INLINE +#include <linux/module.h> #include <linux/types.h> #include <linux/pci.h> #include <linux/sched.h> diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c index 14a4b6a7cf59..407accc80877 100644 --- a/arch/alpha/kernel/sys_marvel.c +++ b/arch/alpha/kernel/sys_marvel.c @@ -317,7 +317,7 @@ marvel_init_irq(void) } static int -marvel_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +marvel_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { struct pci_controller *hose = dev->sysdata; struct io7_port *io7_port = hose->sysdata; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2437ff22e522..b5a696fc0a58 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -340,8 +340,8 @@ config ARCH_AT91 select IRQ_DOMAIN select NEED_MACH_IO_H if PCCARD help - This enables support for systems based on the Atmel AT91RM9200, - AT91SAM9 processors. + This enables support for systems based on Atmel + AT91RM9200 and AT91SAM9* processors. config ARCH_BCMRING bool "Broadcom BCMRING" @@ -528,28 +528,6 @@ config ARCH_IOP33X help Support for Intel's IOP33X (XScale) family of processors. -config ARCH_IXP23XX - bool "IXP23XX-based" - depends on MMU - select CPU_XSC3 - select PCI - select ARCH_USES_GETTIMEOFFSET - select NEED_MACH_IO_H - select NEED_MACH_MEMORY_H - help - Support for Intel's IXP23xx (XScale) family of processors. - -config ARCH_IXP2000 - bool "IXP2400/2800-based" - depends on MMU - select CPU_XSCALE - select PCI - select ARCH_USES_GETTIMEOFFSET - select NEED_MACH_IO_H - select NEED_MACH_MEMORY_H - help - Support for Intel's IXP2400/2800 (XScale) family of processors. - config ARCH_IXP4XX bool "IXP4xx-based" depends on MMU @@ -1046,10 +1024,6 @@ source "arch/arm/mach-iop13xx/Kconfig" source "arch/arm/mach-ixp4xx/Kconfig" -source "arch/arm/mach-ixp2000/Kconfig" - -source "arch/arm/mach-ixp23xx/Kconfig" - source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/mach-ks8695/Kconfig" @@ -1186,6 +1160,15 @@ if !MMU source "arch/arm/Kconfig-nommu" endif +config ARM_ERRATA_326103 + bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory" + depends on CPU_V6 + help + Executing a SWP instruction to read-only memory does not set bit 11 + of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to + treat the access as a read, preventing a COW from occurring and + causing the faulting task to livelock. + config ARM_ERRATA_411920 bool "ARM errata: Invalidation of the Instruction Cache operation can fail" depends on CPU_V6 || CPU_V6K diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 047a20780fc1..a0c40a0986cd 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -149,8 +149,6 @@ machine-$(CONFIG_ARCH_INTEGRATOR) := integrator machine-$(CONFIG_ARCH_IOP13XX) := iop13xx machine-$(CONFIG_ARCH_IOP32X) := iop32x machine-$(CONFIG_ARCH_IOP33X) := iop33x -machine-$(CONFIG_ARCH_IXP2000) := ixp2000 -machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood machine-$(CONFIG_ARCH_KS8695) := ks8695 diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S index aa5ee49c5c5a..6ab0599c02dd 100644 --- a/arch/arm/boot/compressed/head-xscale.S +++ b/arch/arm/boot/compressed/head-xscale.S @@ -32,10 +32,3 @@ __XScale_start: bic r0, r0, #0x1000 @ clear Icache mcr p15, 0, r0, c1, c0, 0 -#ifdef CONFIG_ARCH_IXP2000 - mov r1, #-1 - mov r0, #0xd6000000 - str r1, [r0, #0x14] - str r1, [r0, #0x18] -#endif - diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 0b32925f2147..e2fe3195c0d1 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -173,7 +173,7 @@ mmc@5000 { compatible = "arm,primecell"; reg = < 0x5000 0x1000>; - interrupts = <22>; + interrupts = <22 34>; }; kmi@6000 { compatible = "arm,pl050", "arm,primecell"; diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index 166461073b78..7e8175269064 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -41,7 +41,7 @@ mmc@b000 { compatible = "arm,primecell"; reg = <0xb000 0x1000>; - interrupts = <23>; + interrupts = <23 34>; }; }; }; diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 215816f1775f..e8a4e58f1b82 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -11,7 +11,5 @@ obj-$(CONFIG_DMABOUNCE) += dmabounce.o obj-$(CONFIG_SHARP_LOCOMO) += locomo.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o -obj-$(CONFIG_ARCH_IXP2000) += uengine.o -obj-$(CONFIG_ARCH_IXP23XX) += uengine.o obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o diff --git a/arch/arm/common/uengine.c b/arch/arm/common/uengine.c deleted file mode 100644 index bef408f3d76c..000000000000 --- a/arch/arm/common/uengine.c +++ /dev/null @@ -1,507 +0,0 @@ -/* - * Generic library functions for the microengines found on the Intel - * IXP2000 series of network processors. - * - * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU Lesser General Public License as - * published by the Free Software Foundation; either version 2.1 of the - * License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include <asm/hardware/uengine.h> - -#if defined(CONFIG_ARCH_IXP2000) -#define IXP_UENGINE_CSR_VIRT_BASE IXP2000_UENGINE_CSR_VIRT_BASE -#define IXP_PRODUCT_ID IXP2000_PRODUCT_ID -#define IXP_MISC_CONTROL IXP2000_MISC_CONTROL -#define IXP_RESET1 IXP2000_RESET1 -#else -#if defined(CONFIG_ARCH_IXP23XX) -#define IXP_UENGINE_CSR_VIRT_BASE IXP23XX_UENGINE_CSR_VIRT_BASE -#define IXP_PRODUCT_ID IXP23XX_PRODUCT_ID -#define IXP_MISC_CONTROL IXP23XX_MISC_CONTROL -#define IXP_RESET1 IXP23XX_RESET1 -#else -#error unknown platform -#endif -#endif - -#define USTORE_ADDRESS 0x000 -#define USTORE_DATA_LOWER 0x004 -#define USTORE_DATA_UPPER 0x008 -#define CTX_ENABLES 0x018 -#define CC_ENABLE 0x01c -#define CSR_CTX_POINTER 0x020 -#define INDIRECT_CTX_STS 0x040 -#define ACTIVE_CTX_STS 0x044 -#define INDIRECT_CTX_SIG_EVENTS 0x048 -#define INDIRECT_CTX_WAKEUP_EVENTS 0x050 -#define NN_PUT 0x080 -#define NN_GET 0x084 -#define TIMESTAMP_LOW 0x0c0 -#define TIMESTAMP_HIGH 0x0c4 -#define T_INDEX_BYTE_INDEX 0x0f4 -#define LOCAL_CSR_STATUS 0x180 - -u32 ixp2000_uengine_mask; - -static void *ixp2000_uengine_csr_area(int uengine) -{ - return ((void *)IXP_UENGINE_CSR_VIRT_BASE) + (uengine << 10); -} - -/* - * LOCAL_CSR_STATUS=1 after a read or write to a microengine's CSR - * space means that the microengine we tried to access was also trying - * to access its own CSR space on the same clock cycle as we did. When - * this happens, we lose the arbitration process by default, and the - * read or write we tried to do was not actually performed, so we try - * again until it succeeds. - */ -u32 ixp2000_uengine_csr_read(int uengine, int offset) -{ - void *uebase; - u32 *local_csr_status; - u32 *reg; - u32 value; - - uebase = ixp2000_uengine_csr_area(uengine); - - local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS); - reg = (u32 *)(uebase + offset); - do { - value = ixp2000_reg_read(reg); - } while (ixp2000_reg_read(local_csr_status) & 1); - - return value; -} -EXPORT_SYMBOL(ixp2000_uengine_csr_read); - -void ixp2000_uengine_csr_write(int uengine, int offset, u32 value) -{ - void *uebase; - u32 *local_csr_status; - u32 *reg; - - uebase = ixp2000_uengine_csr_area(uengine); - - local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS); - reg = (u32 *)(uebase + offset); - do { - ixp2000_reg_write(reg, value); - } while (ixp2000_reg_read(local_csr_status) & 1); -} -EXPORT_SYMBOL(ixp2000_uengine_csr_write); - -void ixp2000_uengine_reset(u32 uengine_mask) -{ - u32 value; - - value = ixp2000_reg_read(IXP_RESET1) & ~ixp2000_uengine_mask; - - uengine_mask &= ixp2000_uengine_mask; - ixp2000_reg_wrb(IXP_RESET1, value | uengine_mask); - ixp2000_reg_wrb(IXP_RESET1, value); -} -EXPORT_SYMBOL(ixp2000_uengine_reset); - -void ixp2000_uengine_set_mode(int uengine, u32 mode) -{ - /* - * CTL_STR_PAR_EN: unconditionally enable parity checking on - * control store. - */ - mode |= 0x10000000; - ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mode); - - /* - * Enable updating of condition codes. - */ - ixp2000_uengine_csr_write(uengine, CC_ENABLE, 0x00002000); - - /* - * Initialise other per-microengine registers. - */ - ixp2000_uengine_csr_write(uengine, NN_PUT, 0x00); - ixp2000_uengine_csr_write(uengine, NN_GET, 0x00); - ixp2000_uengine_csr_write(uengine, T_INDEX_BYTE_INDEX, 0); -} -EXPORT_SYMBOL(ixp2000_uengine_set_mode); - -static int make_even_parity(u32 x) -{ - return hweight32(x) & 1; -} - -static void ustore_write(int uengine, u64 insn) -{ - /* - * Generate even parity for top and bottom 20 bits. - */ - insn |= (u64)make_even_parity((insn >> 20) & 0x000fffff) << 41; - insn |= (u64)make_even_parity(insn & 0x000fffff) << 40; - - /* - * Write to microstore. The second write auto-increments - * the USTORE_ADDRESS index register. - */ - ixp2000_uengine_csr_write(uengine, USTORE_DATA_LOWER, (u32)insn); - ixp2000_uengine_csr_write(uengine, USTORE_DATA_UPPER, (u32)(insn >> 32)); -} - -void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns) -{ - int i; - - /* - * Start writing to microstore at address 0. - */ - ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x80000000); - for (i = 0; i < insns; i++) { - u64 insn; - - insn = (((u64)ucode[0]) << 32) | - (((u64)ucode[1]) << 24) | - (((u64)ucode[2]) << 16) | - (((u64)ucode[3]) << 8) | - ((u64)ucode[4]); - ucode += 5; - - ustore_write(uengine, insn); - } - - /* - * Pad with a few NOPs at the end (to avoid the microengine - * aborting as it prefetches beyond the last instruction), unless - * we run off the end of the instruction store first, at which - * point the address register will wrap back to zero. - */ - for (i = 0; i < 4; i++) { - u32 addr; - - addr = ixp2000_uengine_csr_read(uengine, USTORE_ADDRESS); - if (addr == 0x80000000) - break; - ustore_write(uengine, 0xf0000c0300ULL); - } - - /* - * End programming. - */ - ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x00000000); -} -EXPORT_SYMBOL(ixp2000_uengine_load_microcode); - -void ixp2000_uengine_init_context(int uengine, int context, int pc) -{ - /* - * Select the right context for indirect access. - */ - ixp2000_uengine_csr_write(uengine, CSR_CTX_POINTER, context); - - /* - * Initialise signal masks to immediately go to Ready state. - */ - ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_SIG_EVENTS, 1); - ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_WAKEUP_EVENTS, 1); - - /* - * Set program counter. - */ - ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_STS, pc); -} -EXPORT_SYMBOL(ixp2000_uengine_init_context); - -void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask) -{ - u32 mask; - - /* - * Enable the specified context to go to Executing state. - */ - mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES); - mask |= ctx_mask << 8; - ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask); -} -EXPORT_SYMBOL(ixp2000_uengine_start_contexts); - -void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask) -{ - u32 mask; - - /* - * Disable the Ready->Executing transition. Note that this - * does not stop the context until it voluntarily yields. - */ - mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES); - mask &= ~(ctx_mask << 8); - ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask); -} -EXPORT_SYMBOL(ixp2000_uengine_stop_contexts); - -static int check_ixp_type(struct ixp2000_uengine_code *c) -{ - u32 product_id; - u32 rev; - - product_id = ixp2000_reg_read(IXP_PRODUCT_ID); - if (((product_id >> 16) & 0x1f) != 0) - return 0; - - switch ((product_id >> 8) & 0xff) { -#ifdef CONFIG_ARCH_IXP2000 - case 0: /* IXP2800 */ - if (!(c->cpu_model_bitmask & 4)) - return 0; - break; - - case 1: /* IXP2850 */ - if (!(c->cpu_model_bitmask & 8)) - return 0; - break; - - case 2: /* IXP2400 */ - if (!(c->cpu_model_bitmask & 2)) - return 0; - break; -#endif - -#ifdef CONFIG_ARCH_IXP23XX - case 4: /* IXP23xx */ - if (!(c->cpu_model_bitmask & 0x3f0)) - return 0; - break; -#endif - - default: - return 0; - } - - rev = product_id & 0xff; - if (rev < c->cpu_min_revision || rev > c->cpu_max_revision) - return 0; - - return 1; -} - -static void generate_ucode(u8 *ucode, u32 *gpr_a, u32 *gpr_b) -{ - int offset; - int i; - - offset = 0; - - for (i = 0; i < 128; i++) { - u8 b3; - u8 b2; - u8 b1; - u8 b0; - - b3 = (gpr_a[i] >> 24) & 0xff; - b2 = (gpr_a[i] >> 16) & 0xff; - b1 = (gpr_a[i] >> 8) & 0xff; - b0 = gpr_a[i] & 0xff; - - /* immed[@ai, (b1 << 8) | b0] */ - /* 11110000 0000VVVV VVVV11VV VVVVVV00 1IIIIIII */ - ucode[offset++] = 0xf0; - ucode[offset++] = (b1 >> 4); - ucode[offset++] = (b1 << 4) | 0x0c | (b0 >> 6); - ucode[offset++] = (b0 << 2); - ucode[offset++] = 0x80 | i; - - /* immed_w1[@ai, (b3 << 8) | b2] */ - /* 11110100 0100VVVV VVVV11VV VVVVVV00 1IIIIIII */ - ucode[offset++] = 0xf4; - ucode[offset++] = 0x40 | (b3 >> 4); - ucode[offset++] = (b3 << 4) | 0x0c | (b2 >> 6); - ucode[offset++] = (b2 << 2); - ucode[offset++] = 0x80 | i; - } - - for (i = 0; i < 128; i++) { - u8 b3; - u8 b2; - u8 b1; - u8 b0; - - b3 = (gpr_b[i] >> 24) & 0xff; - b2 = (gpr_b[i] >> 16) & 0xff; - b1 = (gpr_b[i] >> 8) & 0xff; - b0 = gpr_b[i] & 0xff; - - /* immed[@bi, (b1 << 8) | b0] */ - /* 11110000 0000VVVV VVVV001I IIIIII11 VVVVVVVV */ - ucode[offset++] = 0xf0; - ucode[offset++] = (b1 >> 4); - ucode[offset++] = (b1 << 4) | 0x02 | (i >> 6); - ucode[offset++] = (i << 2) | 0x03; - ucode[offset++] = b0; - - /* immed_w1[@bi, (b3 << 8) | b2] */ - /* 11110100 0100VVVV VVVV001I IIIIII11 VVVVVVVV */ - ucode[offset++] = 0xf4; - ucode[offset++] = 0x40 | (b3 >> 4); - ucode[offset++] = (b3 << 4) | 0x02 | (i >> 6); - ucode[offset++] = (i << 2) | 0x03; - ucode[offset++] = b2; - } - - /* ctx_arb[kill] */ - ucode[offset++] = 0xe0; - ucode[offset++] = 0x00; - ucode[offset++] = 0x01; - ucode[offset++] = 0x00; - ucode[offset++] = 0x00; -} - -static int set_initial_registers(int uengine, struct ixp2000_uengine_code *c) -{ - int per_ctx_regs; - u32 *gpr_a; - u32 *gpr_b; - u8 *ucode; - int i; - - gpr_a = kzalloc(128 * sizeof(u32), GFP_KERNEL); - gpr_b = kzalloc(128 * sizeof(u32), GFP_KERNEL); - ucode = kmalloc(513 * 5, GFP_KERNEL); - if (gpr_a == NULL || gpr_b == NULL || ucode == NULL) { - kfree(ucode); - kfree(gpr_b); - kfree(gpr_a); - return 1; - } - - per_ctx_regs = 16; - if (c->uengine_parameters & IXP2000_UENGINE_4_CONTEXTS) - per_ctx_regs = 32; - - for (i = 0; i < 256; i++) { - struct ixp2000_reg_value *r = c->initial_reg_values + i; - u32 *bank; - int inc; - int j; - - if (r->reg == -1) - break; - - bank = (r->reg & 0x400) ? gpr_b : gpr_a; - inc = (r->reg & 0x80) ? 128 : per_ctx_regs; - - j = r->reg & 0x7f; - while (j < 128) { - bank[j] = r->value; - j += inc; - } - } - - generate_ucode(ucode, gpr_a, gpr_b); - ixp2000_uengine_load_microcode(uengine, ucode, 513); - ixp2000_uengine_init_context(uengine, 0, 0); - ixp2000_uengine_start_contexts(uengine, 0x01); - for (i = 0; i < 100; i++) { - u32 status; - - status = ixp2000_uengine_csr_read(uengine, ACTIVE_CTX_STS); - if (!(status & 0x80000000)) - break; - } - ixp2000_uengine_stop_contexts(uengine, 0x01); - - kfree(ucode); - kfree(gpr_b); - kfree(gpr_a); - - return !!(i == 100); -} - -int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c) -{ - int ctx; - - if (!check_ixp_type(c)) - return 1; - - if (!(ixp2000_uengine_mask & (1 << uengine))) - return 1; - - ixp2000_uengine_reset(1 << uengine); - ixp2000_uengine_set_mode(uengine, c->uengine_parameters); - if (set_initial_registers(uengine, c)) - return 1; - ixp2000_uengine_load_microcode(uengine, c->insns, c->num_insns); - - for (ctx = 0; ctx < 8; ctx++) - ixp2000_uengine_init_context(uengine, ctx, 0); - - return 0; -} -EXPORT_SYMBOL(ixp2000_uengine_load); - - -static int __init ixp2000_uengine_init(void) -{ - int uengine; - u32 value; - - /* - * Determine number of microengines present. - */ - switch ((ixp2000_reg_read(IXP_PRODUCT_ID) >> 8) & 0x1fff) { -#ifdef CONFIG_ARCH_IXP2000 - case 0: /* IXP2800 */ - case 1: /* IXP2850 */ - ixp2000_uengine_mask = 0x00ff00ff; - break; - - case 2: /* IXP2400 */ - ixp2000_uengine_mask = 0x000f000f; - break; -#endif - -#ifdef CONFIG_ARCH_IXP23XX - case 4: /* IXP23xx */ - ixp2000_uengine_mask = (*IXP23XX_EXP_CFG_FUSE >> 8) & 0xf; - break; -#endif - - default: - printk(KERN_INFO "Detected unknown IXP2000 model (%.8x)\n", - (unsigned int)ixp2000_reg_read(IXP_PRODUCT_ID)); - ixp2000_uengine_mask = 0x00000000; - break; - } - - /* - * Reset microengines. - */ - ixp2000_uengine_reset(ixp2000_uengine_mask); - - /* - * Synchronise timestamp counters across all microengines. - */ - value = ixp2000_reg_read(IXP_MISC_CONTROL); - ixp2000_reg_wrb(IXP_MISC_CONTROL, value & ~0x80); - for (uengine = 0; uengine < 32; uengine++) { - if (ixp2000_uengine_mask & (1 << uengine)) { - ixp2000_uengine_csr_write(uengine, TIMESTAMP_LOW, 0); - ixp2000_uengine_csr_write(uengine, TIMESTAMP_HIGH, 0); - } - } - ixp2000_reg_wrb(IXP_MISC_CONTROL, value | 0x80); - - return 0; -} - -subsys_initcall(ixp2000_uengine_init); diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig new file mode 100644 index 000000000000..67bc571ed0c3 --- /dev/null +++ b/arch/arm/configs/at91_dt_defconfig @@ -0,0 +1,196 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_SOC_AT91SAM9260=y +CONFIG_SOC_AT91SAM9263=y +CONFIG_SOC_AT91SAM9G45=y +CONFIG_SOC_AT91SAM9X5=y +CONFIG_MACH_AT91SAM_DT=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_TIMER_HZ=128 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_UACCESS_WITH_MEMCPY=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" +CONFIG_KEXEC=y +CONFIG_AUTO_ZRELADDR=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +CONFIG_IPV6=y +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set +# CONFIG_INET6_XFRM_MODE_BEET is not set +CONFIG_IPV6_SIT_6RD=y +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_ATMEL_PWM=y +CONFIG_ATMEL_TCLIB=y +CONFIG_EEPROM_93CX6=m +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +CONFIG_DAVICOM_PHY=y +CONFIG_MICREL_PHY=y +# CONFIG_WLAN is not set +CONFIG_INPUT_POLLDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272 +CONFIG_INPUT_JOYDEV=y +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_SERIO is not set +CONFIG_LEGACY_PTY_COUNT=4 +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_AT91SAM9X_WATCHDOG=y +CONFIG_SSB=m +CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_ATMEL=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_ATMEL_LCDC=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_ACORN_8x8=y +CONFIG_FONT_MINI_4x6=y +CONFIG_LOGO=y +# CONFIG_HID_SUPPORT is not set +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_ACM=y +CONFIG_USB_STORAGE=y +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_FTDI_SIO=y +CONFIG_USB_SERIAL_PL2303=y +CONFIG_USB_GADGET=y +CONFIG_USB_AT91=m +CONFIG_USB_ATMEL_USBA=m +CONFIG_USB_ETH=m +CONFIG_USB_GADGETFS=m +CONFIG_USB_CDC_COMPOSITE=m +CONFIG_USB_G_ACM_MS=m +CONFIG_USB_G_MULTI=m +CONFIG_USB_G_MULTI_CDC=y +CONFIG_MMC=y +CONFIG_MMC_ATMELMCI=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91RM9200=y +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_DMADEVICES=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_FANOTIFY=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_FS=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +# CONFIG_CRYPTO_HW is not set +CONFIG_CRC_CCITT=m +CONFIG_CRC_ITU_T=m +CONFIG_CRC7=m +CONFIG_AVERAGE=y diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig index bbe4e1a1f5d8..d54e2acd3ab1 100644 --- a/arch/arm/configs/at91rm9200_defconfig +++ b/arch/arm/configs/at91rm9200_defconfig @@ -14,6 +14,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91RM9200=y CONFIG_MACH_ONEARM=y CONFIG_ARCH_AT91RM9200DK=y CONFIG_MACH_AT91RM9200EK=y diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig deleted file mode 100644 index 8405aded97a3..000000000000 --- a/arch/arm/configs/ixp2000_defconfig +++ /dev/null @@ -1,99 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_HOTPLUG is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_ARCH_IXP2000=y -CONFIG_ARCH_ENP2611=y -CONFIG_ARCH_IXDP2400=y -CONFIG_ARCH_IXDP2800=y -CONFIG_ARCH_IXDP2401=y -CONFIG_ARCH_IXDP2801=y -# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set -# CONFIG_ARM_THUMB is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0" -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_SYN_COOKIES=y -CONFIG_IPV6=y -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set -# CONFIG_IPV6_SIT is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_IXP2000=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_EEPROM_LEGACY=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y -CONFIG_CS89x0=y -CONFIG_E100=y -CONFIG_ENP2611_MSF_NET=y -CONFIG_WAN=y -CONFIG_HDLC=y -CONFIG_HDLC_RAW=y -CONFIG_HDLC_CISCO=y -CONFIG_HDLC_FR=y -CONFIG_HDLC_PPP=y -CONFIG_DLCI=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=3 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_IXP2000=y -CONFIG_WATCHDOG=y -CONFIG_IXP2000_WATCHDOG=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig deleted file mode 100644 index 688717612e91..000000000000 --- a/arch/arm/configs/ixp23xx_defconfig +++ /dev/null @@ -1,105 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_ARCH_IXP23XX=y -CONFIG_MACH_ESPRESSO=y -CONFIG_MACH_IXDP2351=y -CONFIG_MACH_ROADRUNNER=y -# CONFIG_ARM_THUMB is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp" -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_SYN_COOKIES=y -CONFIG_IPV6=y -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set -# CONFIG_IPV6_SIT is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_EEPROM_LEGACY=y -CONFIG_IDE=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y -CONFIG_E100=y -CONFIG_E1000=y -CONFIG_WAN=y -CONFIG_HDLC=y -CONFIG_HDLC_RAW=y -CONFIG_HDLC_CISCO=y -CONFIG_HDLC_FR=y -CONFIG_HDLC_PPP=y -CONFIG_DLCI=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_WATCHDOG=y -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_UHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/include/asm/hardware/uengine.h b/arch/arm/include/asm/hardware/uengine.h deleted file mode 100644 index b442d65c6593..000000000000 --- a/arch/arm/include/asm/hardware/uengine.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Generic library functions for the microengines found on the Intel - * IXP2000 series of network processors. - * - * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU Lesser General Public License as - * published by the Free Software Foundation; either version 2.1 of the - * License, or (at your option) any later version. - */ - -#ifndef __IXP2000_UENGINE_H -#define __IXP2000_UENGINE_H - -extern u32 ixp2000_uengine_mask; - -struct ixp2000_uengine_code -{ - u32 cpu_model_bitmask; - u8 cpu_min_revision; - u8 cpu_max_revision; - - u32 uengine_parameters; - - struct ixp2000_reg_value { - int reg; - u32 value; - } *initial_reg_values; - - int num_insns; - u8 *insns; -}; - -u32 ixp2000_uengine_csr_read(int uengine, int offset); -void ixp2000_uengine_csr_write(int uengine, int offset, u32 value); -void ixp2000_uengine_reset(u32 uengine_mask); -void ixp2000_uengine_set_mode(int uengine, u32 mode); -void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns); -void ixp2000_uengine_init_context(int uengine, int context, int pc); -void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask); -void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask); -int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c); - -#define IXP2000_UENGINE_8_CONTEXTS 0x00000000 -#define IXP2000_UENGINE_4_CONTEXTS 0x80000000 -#define IXP2000_UENGINE_PRN_UPDATE_EVERY 0x40000000 -#define IXP2000_UENGINE_PRN_UPDATE_ON_ACCESS 0x00000000 -#define IXP2000_UENGINE_NN_FROM_SELF 0x00100000 -#define IXP2000_UENGINE_NN_FROM_PREVIOUS 0x00000000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_3 0x000c0000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_2 0x00080000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_1 0x00040000 -#define IXP2000_UENGINE_ASSERT_EMPTY_AT_0 0x00000000 -#define IXP2000_UENGINE_LM_ADDR1_GLOBAL 0x00020000 -#define IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT 0x00000000 -#define IXP2000_UENGINE_LM_ADDR0_GLOBAL 0x00010000 -#define IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT 0x00000000 - - -#endif diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index d4c24d412a8d..0f04d84582e1 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -118,6 +118,13 @@ extern void iwmmxt_task_switch(struct thread_info *); extern void vfp_sync_hwstate(struct thread_info *); extern void vfp_flush_hwstate(struct thread_info *); +struct user_vfp; +struct user_vfp_exc; + +extern int vfp_preserve_user_clear_hwstate(struct user_vfp __user *, + struct user_vfp_exc __user *); +extern int vfp_restore_user_hwstate(struct user_vfp __user *, + struct user_vfp_exc __user *); #endif /* diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h index 60843eb0f61c..73409e6c0251 100644 --- a/arch/arm/include/asm/tls.h +++ b/arch/arm/include/asm/tls.h @@ -7,6 +7,8 @@ .macro set_tls_v6k, tp, tmp1, tmp2 mcr p15, 0, \tp, c13, c0, 3 @ set TLS register + mov \tmp1, #0 + mcr p15, 0, \tmp1, c13, c0, 2 @ clear user r/w TLS register .endm .macro set_tls_v6, tp, tmp1, tmp2 @@ -15,6 +17,8 @@ mov \tmp2, #0xffff0fff tst \tmp1, #HWCAP_TLS @ hardware TLS available? mcrne p15, 0, \tp, c13, c0, 3 @ yes, set TLS register + movne \tmp1, #0 + mcrne p15, 0, \tmp1, c13, c0, 2 @ clear user r/w TLS register streq \tp, [\tmp2, #-15] @ set TLS value at 0xffff0ff0 .endm diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 71ccdbfed662..8349d4e97e2b 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -155,10 +155,10 @@ static bool migrate_one_irq(struct irq_desc *desc) } c = irq_data_get_irq_chip(d); - if (c->irq_set_affinity) - c->irq_set_affinity(d, affinity, true); - else + if (!c->irq_set_affinity) pr_debug("IRQ%u: unable to set affinity\n", d->irq); + else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret) + cpumask_copy(d->affinity, affinity); return ret; } diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 7cb532fc8aa4..d68d1b694680 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -180,44 +180,23 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame) static int preserve_vfp_context(struct vfp_sigframe __user *frame) { - struct thread_info *thread = current_thread_info(); - struct vfp_hard_struct *h = &thread->vfpstate.hard; const unsigned long magic = VFP_MAGIC; const unsigned long size = VFP_STORAGE_SIZE; int err = 0; - vfp_sync_hwstate(thread); __put_user_error(magic, &frame->magic, err); __put_user_error(size, &frame->size, err); - /* - * Copy the floating point registers. There can be unused - * registers see asm/hwcap.h for details. - */ - err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs, - sizeof(h->fpregs)); - /* - * Copy the status and control register. - */ - __put_user_error(h->fpscr, &frame->ufp.fpscr, err); - - /* - * Copy the exception registers. - */ - __put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err); - __put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); - __put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); + if (err) + return -EFAULT; - return err ? -EFAULT : 0; + return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc); } static int restore_vfp_context(struct vfp_sigframe __user *frame) { - struct thread_info *thread = current_thread_info(); - struct vfp_hard_struct *h = &thread->vfpstate.hard; unsigned long magic; unsigned long size; - unsigned long fpexc; int err = 0; __get_user_error(magic, &frame->magic, err); @@ -228,33 +207,7 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame) if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE) return -EINVAL; - vfp_flush_hwstate(thread); - - /* - * Copy the floating point registers. There can be unused - * registers see asm/hwcap.h for details. - */ - err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs, - sizeof(h->fpregs)); - /* - * Copy the status and control register. - */ - __get_user_error(h->fpscr, &frame->ufp.fpscr, err); - - /* - * Sanitise and restore the exception registers. - */ - __get_user_error(fpexc, &frame->ufp_exc.fpexc, err); - /* Ensure the VFP is enabled. */ - fpexc |= FPEXC_EN; - /* Ensure FPINST2 is invalid and the exception flag is cleared. */ - fpexc &= ~(FPEXC_EX | FPEXC_FP2V); - h->fpexc = fpexc; - - __get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); - __get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); - - return err ? -EFAULT : 0; + return vfp_restore_user_hwstate(&frame->ufp, &frame->ufp_exc); } #endif diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index addbbe8028c2..f6a4d32b0421 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -510,10 +510,6 @@ static void ipi_cpu_stop(unsigned int cpu) local_fiq_disable(); local_irq_disable(); -#ifdef CONFIG_HOTPLUG_CPU - platform_cpu_kill(cpu); -#endif - while (1) cpu_relax(); } @@ -576,17 +572,25 @@ void smp_send_reschedule(int cpu) smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE); } +#ifdef CONFIG_HOTPLUG_CPU +static void smp_kill_cpus(cpumask_t *mask) +{ + unsigned int cpu; + for_each_cpu(cpu, mask) + platform_cpu_kill(cpu); +} +#else +static void smp_kill_cpus(cpumask_t *mask) { } +#endif + void smp_send_stop(void) { unsigned long timeout; + struct cpumask mask; - if (num_online_cpus() > 1) { - struct cpumask mask; - cpumask_copy(&mask, cpu_online_mask); - cpumask_clear_cpu(smp_processor_id(), &mask); - - smp_cross_call(&mask, IPI_CPU_STOP); - } + cpumask_copy(&mask, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &mask); + smp_cross_call(&mask, IPI_CPU_STOP); /* Wait up to one second for other CPUs to stop */ timeout = USEC_PER_SEC; @@ -595,6 +599,8 @@ void smp_send_stop(void) if (num_online_cpus() > 1) pr_warning("SMP: failed to stop secondary CPUs\n"); + + smp_kill_cpus(&mask); } /* diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 45db05d8d94c..98a42f3472d5 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -9,15 +9,6 @@ config HAVE_AT91_DBGU0 config HAVE_AT91_DBGU1 bool -config HAVE_AT91_USART3 - bool - -config HAVE_AT91_USART4 - bool - -config HAVE_AT91_USART5 - bool - config AT91_SAM9_ALT_RESET bool default !ARCH_AT91X40 @@ -26,87 +17,121 @@ config AT91_SAM9G45_RESET bool default !ARCH_AT91X40 +config SOC_AT91SAM9 + bool + select GENERIC_CLOCKEVENTS + select CPU_ARM926T + menu "Atmel AT91 System-on-Chip" -choice - prompt "Atmel AT91 Processor" +comment "Atmel AT91 Processor" -config ARCH_AT91RM9200 +config SOC_AT91SAM9 + bool + select CPU_ARM926T + select AT91_SAM9_TIME + select AT91_SAM9_SMC + +config SOC_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 - select HAVE_AT91_USART3 -config ARCH_AT91SAM9260 - bool "AT91SAM9260 or AT91SAM9XE" - select CPU_ARM926T - select GENERIC_CLOCKEVENTS +config SOC_AT91SAM9260 + bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20" + select SOC_AT91SAM9 select HAVE_AT91_DBGU0 - select HAVE_AT91_USART3 - select HAVE_AT91_USART4 - select HAVE_AT91_USART5 select HAVE_NET_MACB + help + Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE + or AT91SAM9G20 SoC. -config ARCH_AT91SAM9261 - bool "AT91SAM9261" - select CPU_ARM926T - select GENERIC_CLOCKEVENTS +config SOC_AT91SAM9261 + bool "AT91SAM9261 or AT91SAM9G10" + select SOC_AT91SAM9 + select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL + help + Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC. + +config SOC_AT91SAM9263 + bool "AT91SAM9263" + select SOC_AT91SAM9 + select HAVE_AT91_DBGU1 + select HAVE_FB_ATMEL + select HAVE_NET_MACB + +config SOC_AT91SAM9RL + bool "AT91SAM9RL" + select SOC_AT91SAM9 select HAVE_AT91_DBGU0 + select HAVE_FB_ATMEL -config ARCH_AT91SAM9G10 - bool "AT91SAM9G10" - select CPU_ARM926T - select GENERIC_CLOCKEVENTS +config SOC_AT91SAM9G45 + bool "AT91SAM9G45 or AT91SAM9M10 families" + select SOC_AT91SAM9 + select HAVE_AT91_DBGU1 + select HAVE_FB_ATMEL + select HAVE_NET_MACB + help + Select this if you are using one of Atmel's AT91SAM9G45 family SoC. + This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11. + +config SOC_AT91SAM9X5 + bool "AT91SAM9x5 family" + select SOC_AT91SAM9 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL + select HAVE_NET_MACB + help + Select this if you are using one of Atmel's AT91SAM9x5 family SoC. + This means that your SAM9 name finishes with a '5' (except if it is + AT91SAM9G45!). + This support covers AT91SAM9G15, AT91SAM9G25, AT91SAM9X25, AT91SAM9G35 + and AT91SAM9X35. + +choice + prompt "Atmel AT91 Processor Devices for non DT boards" + +config ARCH_AT91_NONE + bool "None" + +config ARCH_AT91RM9200 + bool "AT91RM9200" + select SOC_AT91RM9200 + +config ARCH_AT91SAM9260 + bool "AT91SAM9260 or AT91SAM9XE" + select SOC_AT91SAM9260 + +config ARCH_AT91SAM9261 + bool "AT91SAM9261" + select SOC_AT91SAM9261 + +config ARCH_AT91SAM9G10 + bool "AT91SAM9G10" + select SOC_AT91SAM9261 config ARCH_AT91SAM9263 bool "AT91SAM9263" - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - select HAVE_FB_ATMEL - select HAVE_NET_MACB - select HAVE_AT91_DBGU1 + select SOC_AT91SAM9263 config ARCH_AT91SAM9RL bool "AT91SAM9RL" - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - select HAVE_AT91_USART3 - select HAVE_FB_ATMEL - select HAVE_AT91_DBGU0 + select SOC_AT91SAM9RL config ARCH_AT91SAM9G20 bool "AT91SAM9G20" - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - select HAVE_AT91_DBGU0 - select HAVE_AT91_USART3 - select HAVE_AT91_USART4 - select HAVE_AT91_USART5 - select HAVE_NET_MACB + select SOC_AT91SAM9260 config ARCH_AT91SAM9G45 bool "AT91SAM9G45" - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - select HAVE_AT91_USART3 - select HAVE_FB_ATMEL - select HAVE_NET_MACB - select HAVE_AT91_DBGU1 - -config ARCH_AT91SAM9X5 - bool "AT91SAM9x5 family" - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - select HAVE_FB_ATMEL - select HAVE_NET_MACB - select HAVE_AT91_DBGU0 + select SOC_AT91SAM9G45 config ARCH_AT91X40 bool "AT91x40" + depends on !MMU select ARCH_USES_GETTIMEOFFSET endchoice @@ -364,6 +389,7 @@ config MACH_AT91SAM9G20EK_2MMC Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and onwards. + <http://www.atmel.com/tools/SAM9G20-EK.aspx> config MACH_CPU9G20 bool "Eukrea CPU9G20 board" @@ -433,9 +459,10 @@ comment "AT91SAM9G45 Board Type" config MACH_AT91SAM9M10G45EK bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" help - Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit. - "ES" at the end of the name means that this board is an - Engineering Sample. + Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit. + Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10 + families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11. + <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx> endif @@ -515,41 +542,6 @@ config AT91_TIMER_HZ system clock (of at least several MHz), rounding is less of a problem so it can be safer to use a decimal values like 100. -choice - prompt "Select a UART for early kernel messages" - -config AT91_EARLY_DBGU0 - bool "DBGU on rm9200, 9260/9g20, 9261/9g10 and 9rl" - depends on HAVE_AT91_DBGU0 - -config AT91_EARLY_DBGU1 - bool "DBGU on 9263 and 9g45" - depends on HAVE_AT91_DBGU1 - -config AT91_EARLY_USART0 - bool "USART0" - -config AT91_EARLY_USART1 - bool "USART1" - -config AT91_EARLY_USART2 - bool "USART2" - depends on ! ARCH_AT91X40 - -config AT91_EARLY_USART3 - bool "USART3" - depends on HAVE_AT91_USART3 - -config AT91_EARLY_USART4 - bool "USART4" - depends on HAVE_AT91_USART4 - -config AT91_EARLY_USART5 - bool "USART5" - depends on HAVE_AT91_USART5 - -endchoice - endmenu endif diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 8512e53bed93..79d0f60af0b2 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -10,17 +10,25 @@ obj- := obj-$(CONFIG_AT91_PMC_UNIT) += clock.o obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o +obj-$(CONFIG_SOC_AT91SAM9) += at91sam926x_time.o sam9_smc.o # CPU-specific support -obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o -obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o -obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o -obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o -obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o -obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o -obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o -obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o -obj-$(CONFIG_ARCH_AT91SAM9X5) += at91sam9x5.o at91sam926x_time.o sam9_smc.o +obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o at91rm9200_time.o +obj-$(CONFIG_SOC_AT91SAM9260) += at91sam9260.o +obj-$(CONFIG_SOC_AT91SAM9261) += at91sam9261.o +obj-$(CONFIG_SOC_AT91SAM9263) += at91sam9263.o +obj-$(CONFIG_SOC_AT91SAM9G45) += at91sam9g45.o +obj-$(CONFIG_SOC_AT91SAM9X5) += at91sam9x5.o +obj-$(CONFIG_SOC_AT91SAM9RL) += at91sam9rl.o + +obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o +obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o +obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o +obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261_devices.o +obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263_devices.o +obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl_devices.o +obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260_devices.o +obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45_devices.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 364c19357e60..d50da1a9d0bf 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -258,18 +258,6 @@ static void __init at91rm9200_register_clocks(void) clk_register(&pck3); } -static struct clk_lookup console_clock_lookup; - -void __init at91rm9200_set_console_clock(int id) -{ - if (id >= ARRAY_SIZE(usart_clocks_lookups)) - return; - - console_clock_lookup.con_id = "usart"; - console_clock_lookup.clk = usart_clocks_lookups[id].clk; - clkdev_add(&console_clock_lookup); -} - /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 05774e5b1cba..99affb5d0563 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1152,14 +1152,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) at91_uarts[portnr] = pdev; } -void __init at91_set_serial_console(unsigned portnr) -{ - if (portnr < ATMEL_MAX_UART) { - atmel_default_console_device = at91_uarts[portnr]; - at91rm9200_set_console_clock(at91_uarts[portnr]->id); - } -} - void __init at91_add_device_serial(void) { int i; @@ -1168,13 +1160,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } - - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 46f774233298..a27bbec50ca3 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -268,18 +268,6 @@ static void __init at91sam9260_register_clocks(void) clk_register(&pck1); } -static struct clk_lookup console_clock_lookup; - -void __init at91sam9260_set_console_clock(int id) -{ - if (id >= ARRAY_SIZE(usart_clocks_lookups)) - return; - - console_clock_lookup.con_id = "usart"; - console_clock_lookup.clk = usart_clocks_lookups[id].clk; - clkdev_add(&console_clock_lookup); -} - /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 5652dde4bbe2..ad00fe91d37d 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -1229,14 +1229,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) at91_uarts[portnr] = pdev; } -void __init at91_set_serial_console(unsigned portnr) -{ - if (portnr < ATMEL_MAX_UART) { - atmel_default_console_device = at91_uarts[portnr]; - at91sam9260_set_console_clock(at91_uarts[portnr]->id); - } -} - void __init at91_add_device_serial(void) { int i; @@ -1245,13 +1237,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } - - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 7de81e6222f1..c77d503d09d1 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -239,18 +239,6 @@ static void __init at91sam9261_register_clocks(void) clk_register(&hck1); } -static struct clk_lookup console_clock_lookup; - -void __init at91sam9261_set_console_clock(int id) -{ - if (id >= ARRAY_SIZE(usart_clocks_lookups)) - return; - - console_clock_lookup.con_id = "usart"; - console_clock_lookup.clk = usart_clocks_lookups[id].clk; - clkdev_add(&console_clock_lookup); -} - /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 4db961a93085..9295e90b08ff 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -1051,14 +1051,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) at91_uarts[portnr] = pdev; } -void __init at91_set_serial_console(unsigned portnr) -{ - if (portnr < ATMEL_MAX_UART) { - atmel_default_console_device = at91_uarts[portnr]; - at91sam9261_set_console_clock(at91_uarts[portnr]->id); - } -} - void __init at91_add_device_serial(void) { int i; @@ -1067,13 +1059,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } - - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index ef301be66575..7fae36502fbb 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -255,18 +255,6 @@ static void __init at91sam9263_register_clocks(void) clk_register(&pck3); } -static struct clk_lookup console_clock_lookup; - -void __init at91sam9263_set_console_clock(int id) -{ - if (id >= ARRAY_SIZE(usart_clocks_lookups)) - return; - - console_clock_lookup.con_id = "usart"; - console_clock_lookup.clk = usart_clocks_lookups[id].clk; - clkdev_add(&console_clock_lookup); -} - /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index fe99206de880..dfe5bc006d5e 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -1461,14 +1461,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) at91_uarts[portnr] = pdev; } -void __init at91_set_serial_console(unsigned portnr) -{ - if (portnr < ATMEL_MAX_UART) { - atmel_default_console_device = at91_uarts[portnr]; - at91sam9263_set_console_clock(at91_uarts[portnr]->id); - } -} - void __init at91_add_device_serial(void) { int i; @@ -1477,13 +1469,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } - - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index d222f8333dab..f2054495a655 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -288,18 +288,6 @@ static void __init at91sam9g45_register_clocks(void) clk_register(&pck1); } -static struct clk_lookup console_clock_lookup; - -void __init at91sam9g45_set_console_clock(int id) -{ - if (id >= ARRAY_SIZE(usart_clocks_lookups)) - return; - - console_clock_lookup.con_id = "usart"; - console_clock_lookup.clk = usart_clocks_lookups[id].clk; - clkdev_add(&console_clock_lookup); -} - /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 6b008aee1dff..db2f88c246ff 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1741,14 +1741,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) at91_uarts[portnr] = pdev; } -void __init at91_set_serial_console(unsigned portnr) -{ - if (portnr < ATMEL_MAX_UART) { - atmel_default_console_device = at91_uarts[portnr]; - at91sam9g45_set_console_clock(at91_uarts[portnr]->id); - } -} - void __init at91_add_device_serial(void) { int i; @@ -1757,13 +1749,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } - - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index d9f2774f385e..e420085a57ef 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -232,18 +232,6 @@ static void __init at91sam9rl_register_clocks(void) clk_register(&pck1); } -static struct clk_lookup console_clock_lookup; - -void __init at91sam9rl_set_console_clock(int id) -{ - if (id >= ARRAY_SIZE(usart_clocks_lookups)) - return; - - console_clock_lookup.con_id = "usart"; - console_clock_lookup.clk = usart_clocks_lookups[id].clk; - clkdev_add(&console_clock_lookup); -} - /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index fe4ae22e8561..9c0b1481a9a7 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -1192,14 +1192,6 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) at91_uarts[portnr] = pdev; } -void __init at91_set_serial_console(unsigned portnr) -{ - if (portnr < ATMEL_MAX_UART) { - atmel_default_console_device = at91_uarts[portnr]; - at91sam9rl_set_console_clock(at91_uarts[portnr]->id); - } -} - void __init at91_add_device_serial(void) { int i; @@ -1208,13 +1200,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } - - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); } #else void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 2628384aaae1..271f994314a4 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -47,20 +47,6 @@ static void __init onearm_init_early(void) /* Initialize processor: 18.432 MHz crystal */ at91_initialize(18432000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } static struct macb_platform_data __initdata onearm_eth_data = { @@ -82,6 +68,16 @@ static struct at91_udc_data __initdata onearm_udc_data = { static void __init onearm_board_init(void) { /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); at91_add_device_serial(); /* Ethernet */ at91_add_device_eth(&onearm_eth_data); diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index 161efbaa1029..b7d8aa7b81e6 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -52,22 +52,6 @@ static void __init afeb9260_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91_initialize(18432000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, - ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR - | ATMEL_UART_DCD | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, - ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } /* @@ -183,6 +167,18 @@ static struct at91_cf_data afeb9260_cf_data = { static void __init afeb9260_board_init(void) { /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, + ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR + | ATMEL_UART_DCD | ATMEL_UART_RI); + + /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9260_ID_US1, 2, + ATMEL_UART_CTS | ATMEL_UART_RTS); at91_add_device_serial(); /* USB Host */ at91_add_device_usbh(&afeb9260_usbh_data); diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index c6d44ee0c77e..29d3ef0a50fb 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -49,12 +49,6 @@ static void __init cam60_init_early(void) { /* Initialize processor: 10 MHz crystal */ at91_initialize(10000000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } /* @@ -175,6 +169,8 @@ static void __init cam60_add_device_nand(void) static void __init cam60_board_init(void) { /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); at91_add_device_serial(); /* SPI */ at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices)); diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 59d9cf997537..44328a6d4609 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -44,17 +44,6 @@ static void __init carmeva_init_early(void) { /* Initialize processor: 20.000 MHz crystal */ at91_initialize(20000000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } static struct macb_platform_data __initdata carmeva_eth_data = { @@ -139,6 +128,13 @@ static struct gpio_led carmeva_leds[] = { static void __init carmeva_board_init(void) { /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); at91_add_device_serial(); /* Ethernet */ at91_add_device_eth(&carmeva_eth_data); diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 5f3680e7c883..69951ec7dbf3 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -52,34 +52,6 @@ static void __init cpu9krea_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91_initialize(18432000); - - /* DGBU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | - ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR | - ATMEL_UART_DCD | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | - ATMEL_UART_RTS); - - /* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | - ATMEL_UART_RTS); - - /* USART3 on ttyS4. (Rx, Tx) */ - at91_register_uart(AT91SAM9260_ID_US3, 4, 0); - - /* USART4 on ttyS5. (Rx, Tx) */ - at91_register_uart(AT91SAM9260_ID_US4, 5, 0); - - /* USART5 on ttyS6. (Rx, Tx) */ - at91_register_uart(AT91SAM9260_ID_US5, 6, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } /* @@ -352,6 +324,30 @@ static void __init cpu9krea_board_init(void) /* NOR */ cpu9krea_add_device_nor(); /* Serial */ + /* DGBU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | + ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR | + ATMEL_UART_DCD | ATMEL_UART_RI); + + /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | + ATMEL_UART_RTS); + + /* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | + ATMEL_UART_RTS); + + /* USART3 on ttyS4. (Rx, Tx) */ + at91_register_uart(AT91SAM9260_ID_US3, 4, 0); + + /* USART4 on ttyS5. (Rx, Tx) */ + at91_register_uart(AT91SAM9260_ID_US4, 5, 0); + + /* USART5 on ttyS6. (Rx, Tx) */ + at91_register_uart(AT91SAM9260_ID_US5, 6, 0); at91_add_device_serial(); /* USB Host */ at91_add_device_usbh(&cpu9krea_usbh_data); diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index e094cc81fe25..895cf2dba612 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -59,28 +59,6 @@ static void __init cpuat91_init_early(void) /* Initialize processor: 18.432 MHz crystal */ at91_initialize(18432000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | - ATMEL_UART_RTS); - - /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | - ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR | - ATMEL_UART_DCD | ATMEL_UART_RI); - - /* USART2 on ttyS3 (Rx, Tx) */ - at91_register_uart(AT91RM9200_ID_US2, 3, 0); - - /* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS | - ATMEL_UART_RTS); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } static struct macb_platform_data __initdata cpuat91_eth_data = { @@ -161,6 +139,24 @@ static struct platform_device *platform_devices[] __initdata = { static void __init cpuat91_board_init(void) { /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | + ATMEL_UART_RTS); + + /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | + ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR | + ATMEL_UART_DCD | ATMEL_UART_RI); + + /* USART2 on ttyS3 (Rx, Tx) */ + at91_register_uart(AT91RM9200_ID_US2, 3, 0); + + /* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS | + ATMEL_UART_RTS); at91_add_device_serial(); /* LEDs. */ at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds)); diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 1a1547b1ce4e..cd813361cd26 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -47,15 +47,6 @@ static void __init csb337_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ at91_initialize(3686400); - - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); - - /* DBGU on ttyS0 */ - at91_register_uart(0, 0, 0); - - /* make console=ttyS0 the default */ - at91_set_serial_console(0); } static struct macb_platform_data __initdata csb337_eth_data = { @@ -228,7 +219,11 @@ static struct gpio_led csb_leds[] = { static void __init csb337_board_init(void) { + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); /* Serial */ + /* DBGU on ttyS0 */ + at91_register_uart(0, 0, 0); at91_add_device_serial(); /* Ethernet */ at91_add_device_eth(&csb337_eth_data); diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index f650bf39455d..7c8b05a57d7f 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -44,12 +44,6 @@ static void __init csb637_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ at91_initialize(3686400); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* make console=ttyS0 (ie, DBGU) the default */ - at91_set_serial_console(0); } static struct macb_platform_data __initdata csb637_eth_data = { @@ -118,6 +112,8 @@ static void __init csb637_board_init(void) /* LED(s) */ at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds)); /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); at91_add_device_serial(); /* Ethernet */ at91_add_device_eth(&csb637_eth_data); diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c index c18d4d307801..a1fce05aa7a5 100644 --- a/arch/arm/mach-at91/board-dt.c +++ b/arch/arm/mach-at91/board-dt.c @@ -1,10 +1,6 @@ /* * Setup code for AT91SAM Evaluation Kits with Device Tree support * - * Covers: * AT91SAM9G45-EKES board - * * AT91SAM9M10-EKES board - * * AT91SAM9M10G45-EK board - * * Copyright (C) 2011 Atmel, * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> * @@ -49,9 +45,7 @@ static void __init at91_dt_device_init(void) } static const char *at91_dt_board_compat[] __initdata = { - "atmel,at91sam9m10g45ek", - "atmel,at91sam9x5ek", - "calao,usb-a9g20", + "atmel,at91sam9", NULL }; diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index d302ca3eeb64..bd1017297989 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -44,20 +44,6 @@ static void __init eb9200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91_initialize(18432000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART2 on ttyS2. (Rx, Tx) - IRDA */ - at91_register_uart(AT91RM9200_ID_US2, 2, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } static struct macb_platform_data __initdata eb9200_eth_data = { @@ -101,6 +87,16 @@ static struct i2c_board_info __initdata eb9200_i2c_devices[] = { static void __init eb9200_board_init(void) { /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* USART2 on ttyS2. (Rx, Tx) - IRDA */ + at91_register_uart(AT91RM9200_ID_US2, 2, 0); at91_add_device_serial(); /* Ethernet */ at91_add_device_eth(&eb9200_eth_data); diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index 69966ce4d776..89cc3726a9ce 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -50,18 +50,6 @@ static void __init ecb_at91init_early(void) /* Initialize processor: 18.432 MHz crystal */ at91_initialize(18432000); - - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx & Tx only) */ - at91_register_uart(AT91RM9200_ID_US0, 1, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } static struct macb_platform_data __initdata ecb_at91eth_data = { @@ -151,7 +139,15 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = { static void __init ecb_at91board_init(void) { + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7); + /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx & Tx only) */ + at91_register_uart(AT91RM9200_ID_US0, 1, 0); at91_add_device_serial(); /* Ethernet */ diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index f23aabef8551..558546cf63f4 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -37,15 +37,6 @@ static void __init eco920_init_early(void) at91rm9200_set_type(ARCH_REVISON_9200_PQFP); at91_initialize(18432000); - - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); - - /* DBGU on ttyS0. (Rx & Tx only */ - at91_register_uart(0, 0, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } static struct macb_platform_data __initdata eco920_eth_data = { @@ -103,6 +94,10 @@ static struct spi_board_info eco920_spi_devices[] = { static void __init eco920_board_init(void) { + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); + /* DBGU on ttyS0. (Rx & Tx only */ + at91_register_uart(0, 0, 0); at91_add_device_serial(); at91_add_device_eth(&eco920_eth_data); at91_add_device_usbh(&eco920_usbh_data); diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 1815152001f7..47658f78105d 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -41,12 +41,6 @@ static void __init flexibity_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91_initialize(18432000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } /* USB Host port */ @@ -143,6 +137,8 @@ static struct gpio_led flexibity_leds[] = { static void __init flexibity_board_init(void) { /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); at91_add_device_serial(); /* USB Host */ at91_add_device_usbh(&flexibity_usbh_data); diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index caf017f0f4ee..33411e6ecb1f 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -61,44 +61,6 @@ static void __init foxg20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91_initialize(18432000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, - ATMEL_UART_CTS - | ATMEL_UART_RTS - | ATMEL_UART_DTR - | ATMEL_UART_DSR - | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, - ATMEL_UART_CTS - | ATMEL_UART_RTS); - - /* USART2 on ttyS3. (Rx & Tx only) */ - at91_register_uart(AT91SAM9260_ID_US2, 3, 0); - - /* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US3, 4, - ATMEL_UART_CTS - | ATMEL_UART_RTS); - - /* USART4 on ttyS5. (Rx & Tx only) */ - at91_register_uart(AT91SAM9260_ID_US4, 5, 0); - - /* USART5 on ttyS6. (Rx & Tx only) */ - at91_register_uart(AT91SAM9260_ID_US5, 6, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); - - /* Set the internal pull-up resistor on DRXD */ - at91_set_A_periph(AT91_PIN_PB14, 1); - } /* @@ -241,6 +203,39 @@ static struct i2c_board_info __initdata foxg20_i2c_devices[] = { static void __init foxg20_board_init(void) { /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, + ATMEL_UART_CTS + | ATMEL_UART_RTS + | ATMEL_UART_DTR + | ATMEL_UART_DSR + | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9260_ID_US1, 2, + ATMEL_UART_CTS + | ATMEL_UART_RTS); + + /* USART2 on ttyS3. (Rx & Tx only) */ + at91_register_uart(AT91SAM9260_ID_US2, 3, 0); + + /* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9260_ID_US3, 4, + ATMEL_UART_CTS + | ATMEL_UART_RTS); + + /* USART4 on ttyS5. (Rx & Tx only) */ + at91_register_uart(AT91SAM9260_ID_US4, 5, 0); + + /* USART5 on ttyS6. (Rx & Tx only) */ + at91_register_uart(AT91SAM9260_ID_US5, 6, 0); + + /* Set the internal pull-up resistor on DRXD */ + at91_set_A_periph(AT91_PIN_PB14, 1); at91_add_device_serial(); /* USB Host */ at91_add_device_usbh(&foxg20_usbh_data); diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index 230e71969fb7..3e0dfa643a86 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -41,38 +41,6 @@ static void __init gsia18s_init_early(void) { stamp9g20_init_early(); - - /* - * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI). - * Used for Internal Analog Modem. - */ - at91_register_uart(AT91SAM9260_ID_US0, 1, - ATMEL_UART_CTS | ATMEL_UART_RTS | - ATMEL_UART_DTR | ATMEL_UART_DSR | - ATMEL_UART_DCD | ATMEL_UART_RI); - /* - * USART1 on ttyS2 (Rx, Tx, CTS, RTS). - * Used for GPS or WiFi or Data stream. - */ - at91_register_uart(AT91SAM9260_ID_US1, 2, - ATMEL_UART_CTS | ATMEL_UART_RTS); - /* - * USART2 on ttyS3 (Rx, Tx, CTS, RTS). - * Used for External Modem. - */ - at91_register_uart(AT91SAM9260_ID_US2, 3, - ATMEL_UART_CTS | ATMEL_UART_RTS); - /* - * USART3 on ttyS4 (Rx, Tx, RTS). - * Used for RS-485. - */ - at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS); - - /* - * USART4 on ttyS5 (Rx, Tx). - * Used for TRX433 Radio Module. - */ - at91_register_uart(AT91SAM9260_ID_US4, 5, 0); } /* @@ -558,6 +526,37 @@ static int __init gsia18s_power_off_init(void) static void __init gsia18s_board_init(void) { + /* + * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI). + * Used for Internal Analog Modem. + */ + at91_register_uart(AT91SAM9260_ID_US0, 1, + ATMEL_UART_CTS | ATMEL_UART_RTS | + ATMEL_UART_DTR | ATMEL_UART_DSR | + ATMEL_UART_DCD | ATMEL_UART_RI); + /* + * USART1 on ttyS2 (Rx, Tx, CTS, RTS). + * Used for GPS or WiFi or Data stream. + */ + at91_register_uart(AT91SAM9260_ID_US1, 2, + ATMEL_UART_CTS | ATMEL_UART_RTS); + /* + * USART2 on ttyS3 (Rx, Tx, CTS, RTS). + * Used for External Modem. + */ + at91_register_uart(AT91SAM9260_ID_US2, 3, + ATMEL_UART_CTS | ATMEL_UART_RTS); + /* + * USART3 on ttyS4 (Rx, Tx, RTS). + * Used for RS-485. + */ + at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS); + + /* + * USART4 on ttyS5 (Rx, Tx). + * Used for TRX433 Radio Module. + */ + at91_register_uart(AT91SAM9260_ID_US4, 5, 0); stamp9g20_board_init(); at91_add_device_usbh(&usbh_data); at91_add_device_udc(&udc_data); diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index efde1b2327c8..f260657f32bc 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -47,18 +47,6 @@ static void __init kafa_init_early(void) /* Initialize processor: 18.432 MHz crystal */ at91_initialize(18432000); - - /* Set up the LEDs */ - at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } static struct macb_platform_data __initdata kafa_eth_data = { @@ -79,7 +67,15 @@ static struct at91_udc_data __initdata kafa_udc_data = { static void __init kafa_board_init(void) { + /* Set up the LEDs */ + at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); + /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); at91_add_device_serial(); /* Ethernet */ at91_add_device_eth(&kafa_eth_data); diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index 59b92aab9bcf..ba39db5482b9 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -50,24 +50,6 @@ static void __init kb9202_init_early(void) /* Initialize processor: 10 MHz crystal */ at91_initialize(10000000); - - /* Set up the LEDs */ - at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1 (Rx & Tx only) */ - at91_register_uart(AT91RM9200_ID_US0, 1, 0); - - /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */ - at91_register_uart(AT91RM9200_ID_US1, 2, 0); - - /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */ - at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } static struct macb_platform_data __initdata kb9202_eth_data = { @@ -115,7 +97,21 @@ static struct atmel_nand_data __initdata kb9202_nand_data = { static void __init kb9202_board_init(void) { + /* Set up the LEDs */ + at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); + /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1 (Rx & Tx only) */ + at91_register_uart(AT91RM9200_ID_US0, 1, 0); + + /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */ + at91_register_uart(AT91RM9200_ID_US1, 2, 0); + + /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */ + at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS); at91_add_device_serial(); /* Ethernet */ at91_add_device_eth(&kb9202_eth_data); diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 57d5f6a4726a..d2f4cc161766 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -55,15 +55,6 @@ static void __init neocore926_init_early(void) { /* Initialize processor: 20 MHz crystal */ at91_initialize(20000000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } /* @@ -341,6 +332,11 @@ static struct ac97c_platform_data neocore926_ac97_data = { static void __init neocore926_board_init(void) { /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); at91_add_device_serial(); /* USB Host */ diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index b4a12fc184c8..7fe638342421 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -40,17 +40,6 @@ static void __init pcontrol_g20_init_early(void) { stamp9g20_init_early(); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS - | ATMEL_UART_RTS); - - /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485 X5 */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS - | ATMEL_UART_RTS); - - /* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */ - at91_register_uart(AT91SAM9260_ID_US4, 3, 0); } static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { { @@ -199,6 +188,16 @@ static struct spi_board_info pcontrol_g20_spi_devices[] = { static void __init pcontrol_g20_board_init(void) { + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS + | ATMEL_UART_RTS); + + /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485 X5 */ + at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS + | ATMEL_UART_RTS); + + /* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */ + at91_register_uart(AT91SAM9260_ID_US4, 3, 0); stamp9g20_board_init(); at91_add_device_usbh(&usbh_data); at91_add_device_eth(&macb_data); diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 59e35dd14863..b45c0a5d5ca7 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -48,17 +48,6 @@ static void __init picotux200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91_initialize(18432000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } static struct macb_platform_data __initdata picotux200_eth_data = { @@ -106,6 +95,13 @@ static struct platform_device picotux200_flash = { static void __init picotux200_board_init(void) { /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); at91_add_device_serial(); /* Ethernet */ at91_add_device_eth(&picotux200_eth_data); diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index b6ed5ed7081a..0c61bf0d272c 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -52,24 +52,6 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91_initialize(12000000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* set serial console to ttyS1 (ie, USART0) */ - at91_set_serial_console(1); - } /* @@ -235,6 +217,19 @@ static struct gpio_led ek_leds[] = { static void __init ek_board_init(void) { /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS); at91_add_device_serial(); /* USB Host */ at91_add_device_usbh(&ek_usbh_data); diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 01332aa538b2..afd7a4713766 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -50,20 +50,6 @@ static void __init dk_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91_initialize(18432000); - - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } static struct macb_platform_data __initdata dk_eth_data = { @@ -190,7 +176,17 @@ static struct gpio_led dk_leds[] = { static void __init dk_board_init(void) { + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); + /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); at91_add_device_serial(); /* Ethernet */ at91_add_device_eth(&dk_eth_data); diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index b2e4fe21f346..2b15b8adec4c 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -50,20 +50,6 @@ static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91_initialize(18432000); - - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } static struct macb_platform_data __initdata ek_eth_data = { @@ -161,7 +147,17 @@ static struct gpio_led ek_leds[] = { static void __init ek_board_init(void) { + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); + /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); at91_add_device_serial(); /* Ethernet */ at91_add_device_eth(&ek_eth_data); diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c index af0750fafa29..24ab9be7510f 100644 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -35,26 +35,6 @@ static void __init rsi_ews_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91_initialize(18432000); - - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9); - - /* DBGU on ttyS0. (Rx & Tx only) */ - /* This one is for debugging */ - at91_register_uart(0, 0, 0); - - /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - /* Dialin/-out modem interface */ - at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART3 on ttyS4. (Rx, Tx, RTS) */ - /* RS485 communication */ - at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } /* @@ -204,7 +184,23 @@ static struct platform_device rsiews_nor_flash = { */ static void __init rsi_ews_board_init(void) { + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9); + /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + /* This one is for debugging */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + /* Dialin/-out modem interface */ + at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* USART3 on ttyS4. (Rx, Tx, RTS) */ + /* RS485 communication */ + at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS); at91_add_device_serial(); at91_set_gpio_output(AT91_PIN_PA21, 0); /* Ethernet */ diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index e8b116b6cba6..cdd21f2595d2 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -48,23 +48,6 @@ static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91_initialize(18432000); - - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } /* @@ -184,7 +167,20 @@ static struct at91_mmc_data __initdata ek_mmc_data = { static void __init ek_board_init(void) { + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6); + /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); at91_add_device_serial(); /* USB Host */ at91_add_device_usbh(&ek_usbh_data); diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index d5aec55b0eb4..7b3c3913551a 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -54,20 +54,6 @@ static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91_initialize(18432000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } /* @@ -320,6 +306,16 @@ static void __init ek_add_device_buttons(void) {} static void __init ek_board_init(void) { /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); at91_add_device_serial(); /* USB Host */ at91_add_device_usbh(&ek_usbh_data); diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 065fed342424..2736453821b0 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -58,15 +58,6 @@ static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91_initialize(18432000); - - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } /* @@ -577,7 +568,12 @@ static struct gpio_led ek_leds[] = { static void __init ek_board_init(void) { + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14); + /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); at91_add_device_serial(); /* USB Host */ at91_add_device_usbh(&ek_usbh_data); diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 2ffe50f3a9e9..983cb98d2465 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -57,15 +57,6 @@ static void __init ek_init_early(void) { /* Initialize processor: 16.367 MHz crystal */ at91_initialize(16367660); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } /* @@ -412,6 +403,11 @@ static struct at91_can_data ek_can_data = { static void __init ek_board_init(void) { /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); at91_add_device_serial(); /* USB Host */ at91_add_device_usbh(&ek_usbh_data); diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 8923ec9f5831..3d615532ae5c 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -65,20 +65,6 @@ static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91_initialize(18432000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } /* @@ -372,6 +358,16 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = { static void __init ek_board_init(void) { /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); at91_add_device_serial(); /* USB Host */ at91_add_device_usbh(&ek_usbh_data); diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index c88e908ddd82..9a87f0b072f8 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -53,16 +53,6 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91_initialize(12000000); - - /* DGBU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 not connected on the -EK board */ - /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ - at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } /* @@ -457,6 +447,12 @@ static struct platform_device *devices[] __initdata = { static void __init ek_board_init(void) { /* Serial */ + /* DGBU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 not connected on the -EK board */ + /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); at91_add_device_serial(); /* USB HS Host */ at91_add_device_usbh_ohci(&ek_usbh_hs_data); diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index b109ce2ba864..be3239f13daa 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -42,15 +42,6 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91_initialize(12000000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } /* @@ -296,6 +287,11 @@ static void __init ek_add_device_buttons(void) {} static void __init ek_board_init(void) { /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); at91_add_device_serial(); /* USB HS */ at91_add_device_usba(&ek_usba_udc_data); diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index ebc9d01ce742..9d446f1bb45f 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -43,16 +43,6 @@ static void __init snapper9260_init_early(void) { at91_initialize(18432000); - - /* Debug on ttyS0 */ - at91_register_uart(0, 0, 0); - at91_set_serial_console(0); - - at91_register_uart(AT91SAM9260_ID_US0, 1, - ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_register_uart(AT91SAM9260_ID_US1, 2, - ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_register_uart(AT91SAM9260_ID_US2, 3, 0); } static struct at91_usbh_data __initdata snapper9260_usbh_data = { @@ -168,6 +158,14 @@ static void __init snapper9260_board_init(void) snapper9260_i2c_isl1208.irq = gpio_to_irq(AT91_PIN_PA31); i2c_register_board_info(0, &snapper9260_i2c_isl1208, 1); + /* Debug on ttyS0 */ + at91_register_uart(0, 0, 0); + + at91_register_uart(AT91SAM9260_ID_US0, 1, + ATMEL_UART_CTS | ATMEL_UART_RTS); + at91_register_uart(AT91SAM9260_ID_US1, 2, + ATMEL_UART_CTS | ATMEL_UART_RTS); + at91_register_uart(AT91SAM9260_ID_US2, 3, 0); at91_add_device_serial(); at91_add_device_usbh(&snapper9260_usbh_data); at91_add_device_udc(&snapper9260_udc_data); diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 7640049410a0..ee86f9d7ee72 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -36,44 +36,6 @@ void __init stamp9g20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91_initialize(18432000); - - /* DGBU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -static void __init stamp9g20evb_init_early(void) -{ - stamp9g20_init_early(); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR - | ATMEL_UART_DCD | ATMEL_UART_RI); -} - -static void __init portuxg20_init_early(void) -{ - stamp9g20_init_early(); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR - | ATMEL_UART_DCD | ATMEL_UART_RI); - - /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */ - at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS); - - /* USART4 on ttyS5. (Rx, Tx only) */ - at91_register_uart(AT91SAM9260_ID_US4, 5, 0); - - /* USART5 on ttyS6. (Rx, Tx only) */ - at91_register_uart(AT91SAM9260_ID_US5, 6, 0); } /* @@ -254,6 +216,8 @@ void add_w1(void) void __init stamp9g20_board_init(void) { /* Serial */ + /* DGBU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); at91_add_device_serial(); /* NAND */ add_device_nand(); @@ -269,6 +233,22 @@ void __init stamp9g20_board_init(void) static void __init portuxg20_board_init(void) { + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR + | ATMEL_UART_DCD | ATMEL_UART_RI); + + /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* USART4 on ttyS5. (Rx, Tx only) */ + at91_register_uart(AT91SAM9260_ID_US4, 5, 0); + + /* USART5 on ttyS6. (Rx, Tx only) */ + at91_register_uart(AT91SAM9260_ID_US5, 6, 0); stamp9g20_board_init(); /* USB Host */ at91_add_device_usbh(&usbh_data); @@ -286,6 +266,10 @@ static void __init portuxg20_board_init(void) static void __init stamp9g20evb_board_init(void) { + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR + | ATMEL_UART_DCD | ATMEL_UART_RI); stamp9g20_board_init(); /* USB Host */ at91_add_device_usbh(&usbh_data); @@ -303,7 +287,7 @@ MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ .timer = &at91sam926x_timer, .map_io = at91_map_io, - .init_early = portuxg20_init_early, + .init_early = stamp9g20_init_early, .init_irq = at91_init_irq_default, .init_machine = portuxg20_board_init, MACHINE_END @@ -312,7 +296,7 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ .timer = &at91sam926x_timer, .map_io = at91_map_io, - .init_early = stamp9g20evb_init_early, + .init_early = stamp9g20_init_early, .init_irq = at91_init_irq_default, .init_machine = stamp9g20evb_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c index b7483a3d0980..332ecd40bd02 100644 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ b/arch/arm/mach-at91/board-usb-a926x.c @@ -53,12 +53,6 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.00 MHz crystal */ at91_initialize(12000000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } /* @@ -325,6 +319,8 @@ static void __init ek_add_device_leds(void) static void __init ek_board_init(void) { /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); at91_add_device_serial(); /* USB Host */ at91_add_device_usbh(&ek_usbh_data); diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 38dd279d30b2..d56665ea4b55 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -58,26 +58,6 @@ static void __init yl9200_init_early(void) /* Initialize processor: 18.432 MHz crystal */ at91_initialize(18432000); - - /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */ - at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD - | ATMEL_UART_RI); - - /* USART0 on ttyS2. (Rx & Tx only to JP3) */ - at91_register_uart(AT91RM9200_ID_US0, 2, 0); - - /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */ - at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } /* @@ -560,7 +540,23 @@ void __init yl9200_add_device_video(void) {} static void __init yl9200_board_init(void) { + /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */ + at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17); + /* Serial */ + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* USART0 on ttyS2. (Rx & Tx only to JP3) */ + at91_register_uart(AT91RM9200_ID_US0, 2, 0); + + /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */ + at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS); at91_add_device_serial(); /* Ethernet */ at91_add_device_eth(&yl9200_eth_data); diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c index ece1f9aefb47..0c6381516a5a 100644 --- a/arch/arm/mach-at91/cpuidle.c +++ b/arch/arm/mach-at91/cpuidle.c @@ -21,6 +21,7 @@ #include <linux/export.h> #include <asm/proc-fns.h> #include <asm/cpuidle.h> +#include <mach/cpu.h> #include "pm.h" @@ -33,7 +34,12 @@ static int at91_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - at91_standby(); + if (cpu_is_at91rm9200()) + at91rm9200_standby(); + else if (cpu_is_at91sam9g45()) + at91sam9g45_standby(); + else + at91sam9_standby(); return index; } diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index dd9b346c451d..0a60bf837037 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -40,17 +40,6 @@ extern struct sys_timer at91sam926x_timer; extern struct sys_timer at91x40_timer; /* Clocks */ -/* - * function to specify the clock of the default console. As we do not - * use the device/driver bus, the dev_name is not intialize. So we need - * to link the clock to a specific con_id only "usart" - */ -extern void __init at91rm9200_set_console_clock(int id); -extern void __init at91sam9260_set_console_clock(int id); -extern void __init at91sam9261_set_console_clock(int id); -extern void __init at91sam9263_set_console_clock(int id); -extern void __init at91sam9rl_set_console_clock(int id); -extern void __init at91sam9g45_set_console_clock(int id); #ifdef CONFIG_AT91_PMC_UNIT extern int __init at91_clock_init(unsigned long main_clock); extern int __init at91_dt_clock_init(void); diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h index 603e6aac2a4f..e67317c67761 100644 --- a/arch/arm/mach-at91/include/mach/at91rm9200.h +++ b/arch/arm/mach-at91/include/mach/at91rm9200.h @@ -88,11 +88,6 @@ #define AT91RM9200_BASE_RTC 0xfffffe00 /* Real-Time Clock */ #define AT91RM9200_BASE_MC 0xffffff00 /* Memory Controllers */ -#define AT91_USART0 AT91RM9200_BASE_US0 -#define AT91_USART1 AT91RM9200_BASE_US1 -#define AT91_USART2 AT91RM9200_BASE_US2 -#define AT91_USART3 AT91RM9200_BASE_US3 - /* * Internal Memory. */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index 08ae9afd00fe..416c7b6c56d3 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -95,13 +95,6 @@ #define AT91SAM9260_BASE_WDT 0xfffffd40 #define AT91SAM9260_BASE_GPBR 0xfffffd50 -#define AT91_USART0 AT91SAM9260_BASE_US0 -#define AT91_USART1 AT91SAM9260_BASE_US1 -#define AT91_USART2 AT91SAM9260_BASE_US2 -#define AT91_USART3 AT91SAM9260_BASE_US3 -#define AT91_USART4 AT91SAM9260_BASE_US4 -#define AT91_USART5 AT91SAM9260_BASE_US5 - /* * Internal Memory. diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index 44fbdc12ee62..a041406d06ee 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -79,10 +79,6 @@ #define AT91SAM9261_BASE_WDT 0xfffffd40 #define AT91SAM9261_BASE_GPBR 0xfffffd50 -#define AT91_USART0 AT91SAM9261_BASE_US0 -#define AT91_USART1 AT91SAM9261_BASE_US1 -#define AT91_USART2 AT91SAM9261_BASE_US2 - /* * Internal Memory. diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h index d96cbb2e03c4..d201029d60b3 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -95,10 +95,6 @@ #define AT91SAM9263_BASE_RTT1 0xfffffd50 #define AT91SAM9263_BASE_GPBR 0xfffffd60 -#define AT91_USART0 AT91SAM9263_BASE_US0 -#define AT91_USART1 AT91SAM9263_BASE_US1 -#define AT91_USART2 AT91SAM9263_BASE_US2 - #define AT91_SMC AT91_SMC0 /* diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index d052abcff852..3a4da24d5911 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -106,11 +106,6 @@ #define AT91SAM9G45_BASE_RTC 0xfffffdb0 #define AT91SAM9G45_BASE_GPBR 0xfffffd60 -#define AT91_USART0 AT91SAM9G45_BASE_US0 -#define AT91_USART1 AT91SAM9G45_BASE_US1 -#define AT91_USART2 AT91SAM9G45_BASE_US2 -#define AT91_USART3 AT91SAM9G45_BASE_US3 - /* * Internal Memory. */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index e0073eb10144..a15db56d33fa 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -89,11 +89,6 @@ #define AT91SAM9RL_BASE_GPBR 0xfffffd60 #define AT91SAM9RL_BASE_RTC 0xfffffe00 -#define AT91_USART0 AT91SAM9RL_BASE_US0 -#define AT91_USART1 AT91SAM9RL_BASE_US1 -#define AT91_USART2 AT91SAM9RL_BASE_US2 -#define AT91_USART3 AT91SAM9RL_BASE_US3 - /* * Internal Memory. diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h index 88e43d534cdf..c75ee19b58d3 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9x5.h +++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h @@ -55,14 +55,6 @@ #define AT91SAM9X5_BASE_USART2 0xf8024000 /* - * Base addresses for early serial code (uncompress.h) - */ -#define AT91_DBGU AT91_BASE_DBGU0 -#define AT91_USART0 AT91SAM9X5_BASE_USART0 -#define AT91_USART1 AT91SAM9X5_BASE_USART1 -#define AT91_USART2 AT91SAM9X5_BASE_USART2 - -/* * Internal Memory. */ #define AT91SAM9X5_SRAM_BASE 0x00300000 /* Internal SRAM base address */ diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 49a821192c65..369afc2ffc5b 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -121,7 +121,6 @@ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_de #define ATMEL_UART_RI 0x20 extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins); -extern void __init at91_set_serial_console(unsigned portnr); extern struct platform_device *atmel_default_console_device; diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 0118c3338552..73d2fd209ce4 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -54,6 +54,7 @@ #define ARCH_REVISON_9200_BGA (0 << 0) #define ARCH_REVISON_9200_PQFP (1 << 0) +#ifndef __ASSEMBLY__ enum at91_soc_type { /* 920T */ AT91_SOC_RM9200, @@ -106,7 +107,7 @@ static inline int at91_soc_is_detected(void) return at91_soc_initdata.type != AT91_SOC_NONE; } -#ifdef CONFIG_ARCH_AT91RM9200 +#ifdef CONFIG_SOC_AT91RM9200 #define cpu_is_at91rm9200() (at91_soc_initdata.type == AT91_SOC_RM9200) #define cpu_is_at91rm9200_bga() (at91_soc_initdata.subtype == AT91_SOC_RM9200_BGA) #define cpu_is_at91rm9200_pqfp() (at91_soc_initdata.subtype == AT91_SOC_RM9200_PQFP) @@ -116,45 +117,37 @@ static inline int at91_soc_is_detected(void) #define cpu_is_at91rm9200_pqfp() (0) #endif -#ifdef CONFIG_ARCH_AT91SAM9260 +#ifdef CONFIG_SOC_AT91SAM9260 #define cpu_is_at91sam9xe() (at91_soc_initdata.subtype == AT91_SOC_SAM9XE) #define cpu_is_at91sam9260() (at91_soc_initdata.type == AT91_SOC_SAM9260) +#define cpu_is_at91sam9g20() (at91_soc_initdata.type == AT91_SOC_SAM9G20) #else #define cpu_is_at91sam9xe() (0) #define cpu_is_at91sam9260() (0) -#endif - -#ifdef CONFIG_ARCH_AT91SAM9G20 -#define cpu_is_at91sam9g20() (at91_soc_initdata.type == AT91_SOC_SAM9G20) -#else #define cpu_is_at91sam9g20() (0) #endif -#ifdef CONFIG_ARCH_AT91SAM9261 +#ifdef CONFIG_SOC_AT91SAM9261 #define cpu_is_at91sam9261() (at91_soc_initdata.type == AT91_SOC_SAM9261) -#else -#define cpu_is_at91sam9261() (0) -#endif - -#ifdef CONFIG_ARCH_AT91SAM9G10 #define cpu_is_at91sam9g10() (at91_soc_initdata.type == AT91_SOC_SAM9G10) #else +#define cpu_is_at91sam9261() (0) #define cpu_is_at91sam9g10() (0) #endif -#ifdef CONFIG_ARCH_AT91SAM9263 +#ifdef CONFIG_SOC_AT91SAM9263 #define cpu_is_at91sam9263() (at91_soc_initdata.type == AT91_SOC_SAM9263) #else #define cpu_is_at91sam9263() (0) #endif -#ifdef CONFIG_ARCH_AT91SAM9RL +#ifdef CONFIG_SOC_AT91SAM9RL #define cpu_is_at91sam9rl() (at91_soc_initdata.type == AT91_SOC_SAM9RL) #else #define cpu_is_at91sam9rl() (0) #endif -#ifdef CONFIG_ARCH_AT91SAM9G45 +#ifdef CONFIG_SOC_AT91SAM9G45 #define cpu_is_at91sam9g45() (at91_soc_initdata.type == AT91_SOC_SAM9G45) #define cpu_is_at91sam9g45es() (at91_soc_initdata.subtype == AT91_SOC_SAM9G45ES) #define cpu_is_at91sam9m10() (at91_soc_initdata.subtype == AT91_SOC_SAM9M10) @@ -168,7 +161,7 @@ static inline int at91_soc_is_detected(void) #define cpu_is_at91sam9m11() (0) #endif -#ifdef CONFIG_ARCH_AT91SAM9X5 +#ifdef CONFIG_SOC_AT91SAM9X5 #define cpu_is_at91sam9x5() (at91_soc_initdata.type == AT91_SOC_SAM9X5) #define cpu_is_at91sam9g15() (at91_soc_initdata.subtype == AT91_SOC_SAM9G15) #define cpu_is_at91sam9g35() (at91_soc_initdata.subtype == AT91_SOC_SAM9G35) @@ -189,5 +182,6 @@ static inline int at91_soc_is_detected(void) * definitions may reduce clutter in common drivers. */ #define cpu_is_at32ap7000() (0) +#endif /* __ASSEMBLY__ */ #endif /* __MACH_CPU_H__ */ diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index e9e29a6c3868..3a01f8ff7e74 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -22,27 +22,17 @@ /* 9263, 9g45 */ #define AT91_BASE_DBGU1 0xffffee00 -#if defined(CONFIG_ARCH_AT91RM9200) +#if defined(CONFIG_ARCH_AT91X40) +#include <mach/at91x40.h> +#else #include <mach/at91rm9200.h> -#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) #include <mach/at91sam9260.h> -#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10) #include <mach/at91sam9261.h> -#elif defined(CONFIG_ARCH_AT91SAM9263) #include <mach/at91sam9263.h> -#elif defined(CONFIG_ARCH_AT91SAM9RL) #include <mach/at91sam9rl.h> -#elif defined(CONFIG_ARCH_AT91SAM9G45) #include <mach/at91sam9g45.h> -#elif defined(CONFIG_ARCH_AT91SAM9X5) #include <mach/at91sam9x5.h> -#elif defined(CONFIG_ARCH_AT91X40) -#include <mach/at91x40.h> -#else -#error "Unsupported AT91 processor" -#endif -#if !defined(CONFIG_ARCH_AT91X40) /* * On all at91 except rm9200 and x40 have the System Controller starts * at address 0xffffc000 and has a size of 16KiB. diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h index 4218647c1fcd..6f6118d1576a 100644 --- a/arch/arm/mach-at91/include/mach/uncompress.h +++ b/arch/arm/mach-at91/include/mach/uncompress.h @@ -1,7 +1,8 @@ /* * arch/arm/mach-at91/include/mach/uncompress.h * - * Copyright (C) 2003 SAN People + * Copyright (C) 2003 SAN People + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -25,22 +26,147 @@ #include <linux/atmel_serial.h> #include <mach/hardware.h> -#if defined(CONFIG_AT91_EARLY_DBGU0) -#define UART_OFFSET AT91_BASE_DBGU0 -#elif defined(CONFIG_AT91_EARLY_DBGU1) -#define UART_OFFSET AT91_BASE_DBGU1 -#elif defined(CONFIG_AT91_EARLY_USART0) -#define UART_OFFSET AT91_USART0 -#elif defined(CONFIG_AT91_EARLY_USART1) -#define UART_OFFSET AT91_USART1 -#elif defined(CONFIG_AT91_EARLY_USART2) -#define UART_OFFSET AT91_USART2 -#elif defined(CONFIG_AT91_EARLY_USART3) -#define UART_OFFSET AT91_USART3 -#elif defined(CONFIG_AT91_EARLY_USART4) -#define UART_OFFSET AT91_USART4 -#elif defined(CONFIG_AT91_EARLY_USART5) -#define UART_OFFSET AT91_USART5 +#include <mach/at91_dbgu.h> +#include <mach/cpu.h> + +void __iomem *at91_uart; + +#if !defined(CONFIG_ARCH_AT91X40) +static const u32 uarts_rm9200[] = { + AT91_BASE_DBGU0, + AT91RM9200_BASE_US0, + AT91RM9200_BASE_US1, + AT91RM9200_BASE_US2, + AT91RM9200_BASE_US3, + 0, +}; + +static const u32 uarts_sam9260[] = { + AT91_BASE_DBGU0, + AT91SAM9260_BASE_US0, + AT91SAM9260_BASE_US1, + AT91SAM9260_BASE_US2, + AT91SAM9260_BASE_US3, + AT91SAM9260_BASE_US4, + AT91SAM9260_BASE_US5, + 0, +}; + +static const u32 uarts_sam9261[] = { + AT91_BASE_DBGU0, + AT91SAM9261_BASE_US0, + AT91SAM9261_BASE_US1, + AT91SAM9261_BASE_US2, + 0, +}; + +static const u32 uarts_sam9263[] = { + AT91_BASE_DBGU1, + AT91SAM9263_BASE_US0, + AT91SAM9263_BASE_US1, + AT91SAM9263_BASE_US2, + 0, +}; + +static const u32 uarts_sam9g45[] = { + AT91_BASE_DBGU1, + AT91SAM9G45_BASE_US0, + AT91SAM9G45_BASE_US1, + AT91SAM9G45_BASE_US2, + AT91SAM9G45_BASE_US3, + 0, +}; + +static const u32 uarts_sam9rl[] = { + AT91_BASE_DBGU0, + AT91SAM9RL_BASE_US0, + AT91SAM9RL_BASE_US1, + AT91SAM9RL_BASE_US2, + AT91SAM9RL_BASE_US3, + 0, +}; + +static const u32 uarts_sam9x5[] = { + AT91_BASE_DBGU0, + AT91SAM9X5_BASE_USART0, + AT91SAM9X5_BASE_USART1, + AT91SAM9X5_BASE_USART2, + 0, +}; + +static inline const u32* decomp_soc_detect(u32 dbgu_base) +{ + u32 cidr, socid; + + cidr = __raw_readl(dbgu_base + AT91_DBGU_CIDR); + socid = cidr & ~AT91_CIDR_VERSION; + + switch (socid) { + case ARCH_ID_AT91RM9200: + return uarts_rm9200; + + case ARCH_ID_AT91SAM9G20: + case ARCH_ID_AT91SAM9260: + return uarts_sam9260; + + case ARCH_ID_AT91SAM9261: + return uarts_sam9261; + + case ARCH_ID_AT91SAM9263: + return uarts_sam9263; + + case ARCH_ID_AT91SAM9G45: + return uarts_sam9g45; + + case ARCH_ID_AT91SAM9RL64: + return uarts_sam9rl; + + case ARCH_ID_AT91SAM9X5: + return uarts_sam9x5; + } + + /* at91sam9g10 */ + if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { + return uarts_sam9261; + } + /* at91sam9xe */ + else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) { + return uarts_sam9260; + } + + return NULL; +} + +static inline void arch_decomp_setup(void) +{ + int i = 0; + const u32* usarts; + + usarts = decomp_soc_detect(AT91_BASE_DBGU0); + + if (!usarts) + usarts = decomp_soc_detect(AT91_BASE_DBGU1); + if (!usarts) { + at91_uart = NULL; + return; + } + + do { + /* physical address */ + at91_uart = (void __iomem *)usarts[i]; + + if (__raw_readl(at91_uart + ATMEL_US_BRGR)) + return; + i++; + } while (usarts[i]); + + at91_uart = NULL; +} +#else +static inline void arch_decomp_setup(void) +{ + at91_uart = NULL; +} #endif /* @@ -52,28 +178,24 @@ */ static void putc(int c) { -#ifdef UART_OFFSET - void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */ + if (!at91_uart) + return; - while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY)) + while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXRDY)) barrier(); - __raw_writel(c, sys + ATMEL_US_THR); -#endif + __raw_writel(c, at91_uart + ATMEL_US_THR); } static inline void flush(void) { -#ifdef UART_OFFSET - void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */ + if (!at91_uart) + return; /* wait for transmission to complete */ - while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY)) + while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXEMPTY)) barrier(); -#endif } -#define arch_decomp_setup() - #define arch_decomp_wdog() #endif diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index f630250c6b87..1bfaad628731 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -261,7 +261,12 @@ static int at91_pm_enter(suspend_state_t state) * For ARM 926 based chips, this requirement is weaker * as at91sam9 can access a RAM in self-refresh mode. */ - at91_standby(); + if (cpu_is_at91rm9200()) + at91rm9200_standby(); + else if (cpu_is_at91sam9g45()) + at91sam9g45_standby(); + else + at91sam9_standby(); break; case PM_SUSPEND_ON: @@ -307,10 +312,9 @@ static int __init at91_pm_init(void) pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : "")); -#ifdef CONFIG_ARCH_AT91RM9200 /* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */ - at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0); -#endif + if (cpu_is_at91rm9200()) + at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0); suspend_set_ops(&at91_pm_ops); diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 89f56f3a802e..38f467c6b710 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -12,7 +12,6 @@ #define __ARCH_ARM_MACH_AT91_PM #include <mach/at91_ramc.h> -#ifdef CONFIG_ARCH_AT91RM9200 #include <mach/at91rm9200_sdramc.h> /* @@ -43,10 +42,6 @@ static inline void at91rm9200_standby(void) "r" (lpr)); } -#define at91_standby at91rm9200_standby - -#elif defined(CONFIG_ARCH_AT91SAM9G45) - /* We manage both DDRAM/SDRAM controllers, we need more than one value to * remember. */ @@ -75,11 +70,7 @@ static inline void at91sam9g45_standby(void) at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); } -#define at91_standby at91sam9g45_standby - -#else - -#ifdef CONFIG_ARCH_AT91SAM9263 +#ifdef CONFIG_SOC_AT91SAM9263 /* * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use; * handle those cases both here and in the Suspend-To-RAM support. @@ -102,8 +93,4 @@ static inline void at91sam9_standby(void) at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr); } -#define at91_standby at91sam9_standby - -#endif - #endif diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index db5452123f17..098c28ddf025 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -18,7 +18,7 @@ #include <mach/at91_ramc.h> -#ifdef CONFIG_ARCH_AT91SAM9263 +#ifdef CONFIG_SOC_AT91SAM9263 /* * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use; * handle those cases both here and in the Suspend-To-RAM support. diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index 5db4aa45404a..683dddfd8b13 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -26,30 +26,30 @@ static inline int at91_soc_is_enabled(void) return at91_boot_soc.init != NULL; } -#if !defined(CONFIG_ARCH_AT91RM9200) +#if !defined(CONFIG_SOC_AT91RM9200) #define at91rm9200_soc at91_boot_soc #endif -#if !(defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)) +#if !defined(CONFIG_SOC_AT91SAM9260) #define at91sam9260_soc at91_boot_soc #endif -#if !(defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)) +#if !defined(CONFIG_SOC_AT91SAM9261) #define at91sam9261_soc at91_boot_soc #endif -#if !defined(CONFIG_ARCH_AT91SAM9263) +#if !defined(CONFIG_SOC_AT91SAM9263) #define at91sam9263_soc at91_boot_soc #endif -#if !defined(CONFIG_ARCH_AT91SAM9G45) +#if !defined(CONFIG_SOC_AT91SAM9G45) #define at91sam9g45_soc at91_boot_soc #endif -#if !defined(CONFIG_ARCH_AT91SAM9RL) +#if !defined(CONFIG_SOC_AT91SAM9RL) #define at91sam9rl_soc at91_boot_soc #endif -#if !defined(CONFIG_ARCH_AT91SAM9X5) +#if !defined(CONFIG_SOC_AT91SAM9X5) #define at91sam9x5_soc at91_boot_soc #endif diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index bda7aca04ca0..42ab1e7c4ecc 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -181,7 +181,7 @@ static int get_tclk(void) return 166666667; } -static void dove_timer_init(void) +static void __init dove_timer_init(void) { orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, IRQ_DOVE_BRIDGE, get_tclk()); diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c index 51e0e411c9cb..7f70afc26f91 100644 --- a/arch/arm/mach-dove/mpp.c +++ b/arch/arm/mach-dove/mpp.c @@ -56,7 +56,7 @@ static void dove_mpp_gpio_mode(int start, int end, int gpio_mode) /* Dump all the extra MPP registers. The platform code will dump the registers for pins 0-23. */ -static void dove_mpp_dump_regs(void) +static void __init dove_mpp_dump_regs(void) { pr_debug("PMU_CTRL4_CTRL: %08x\n", readl(DOVE_MPP_CTRL4_VIRT_BASE)); @@ -67,7 +67,7 @@ static void dove_mpp_dump_regs(void) pr_debug("MPP_GENERAL: %08x\n", readl(DOVE_MPP_GENERAL_VIRT_BASE)); } -static void dove_mpp_cfg_nfc(int sel) +static void __init dove_mpp_cfg_nfc(int sel) { u32 mpp_gen_cfg = readl(DOVE_MPP_GENERAL_VIRT_BASE); @@ -78,7 +78,7 @@ static void dove_mpp_cfg_nfc(int sel) dove_mpp_gpio_mode(64, 71, GPIO_OUTPUT_OK); } -static void dove_mpp_cfg_au1(int sel) +static void __init dove_mpp_cfg_au1(int sel) { u32 mpp_ctrl4 = readl(DOVE_MPP_CTRL4_VIRT_BASE); u32 ssp_ctrl1 = readl(DOVE_SSP_CTRL_STATUS_1); @@ -118,7 +118,7 @@ static void dove_mpp_cfg_au1(int sel) /* Configure the group registers, enabling GPIO if sel indicates the pin is to be used for GPIO */ -static void dove_mpp_conf_grp(unsigned int *mpp_grp_list) +static void __init dove_mpp_conf_grp(unsigned int *mpp_grp_list) { u32 mpp_ctrl4 = readl(DOVE_MPP_CTRL4_VIRT_BASE); int gpio_mode; diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index 97a249395b5a..fe3c1fa5462b 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -2,6 +2,11 @@ if ARCH_EP93XX menu "Cirrus EP93xx Implementation Options" +config EP93XX_SOC_COMMON + bool + default y + select LEDS_GPIO_REGISTER + config CRUNCH bool "Support for MaverickCrunch" help diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 8d2589588713..66b1494f23a6 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -241,11 +241,7 @@ unsigned int ep93xx_chip_revision(void) * EP93xx GPIO *************************************************************************/ static struct resource ep93xx_gpio_resource[] = { - { - .start = EP93XX_GPIO_PHYS_BASE, - .end = EP93XX_GPIO_PHYS_BASE + 0xcc - 1, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM(EP93XX_GPIO_PHYS_BASE, 0xcc), }; static struct platform_device ep93xx_gpio_device = { @@ -288,11 +284,7 @@ static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE, { IRQ_EP93XX_UART3 }, &ep93xx_uart_data); static struct resource ep93xx_rtc_resource[] = { - { - .start = EP93XX_RTC_PHYS_BASE, - .end = EP93XX_RTC_PHYS_BASE + 0x10c - 1, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM(EP93XX_RTC_PHYS_BASE, 0x10c), }; static struct platform_device ep93xx_rtc_device = { @@ -304,16 +296,8 @@ static struct platform_device ep93xx_rtc_device = { static struct resource ep93xx_ohci_resources[] = { - [0] = { - .start = EP93XX_USB_PHYS_BASE, - .end = EP93XX_USB_PHYS_BASE + 0x0fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_EP93XX_USB, - .end = IRQ_EP93XX_USB, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(EP93XX_USB_PHYS_BASE, 0x1000), + DEFINE_RES_IRQ(IRQ_EP93XX_USB), }; @@ -372,15 +356,8 @@ void __init ep93xx_register_flash(unsigned int width, static struct ep93xx_eth_data ep93xx_eth_data; static struct resource ep93xx_eth_resource[] = { - { - .start = EP93XX_ETHERNET_PHYS_BASE, - .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_EP93XX_ETHERNET, - .end = IRQ_EP93XX_ETHERNET, - .flags = IORESOURCE_IRQ, - } + DEFINE_RES_MEM(EP93XX_ETHERNET_PHYS_BASE, 0x10000), + DEFINE_RES_IRQ(IRQ_EP93XX_ETHERNET), }; static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32); @@ -461,16 +438,8 @@ void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data, static struct ep93xx_spi_info ep93xx_spi_master_data; static struct resource ep93xx_spi_resources[] = { - { - .start = EP93XX_SPI_PHYS_BASE, - .end = EP93XX_SPI_PHYS_BASE + 0x18 - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_EP93XX_SSP, - .end = IRQ_EP93XX_SSP, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(EP93XX_SPI_PHYS_BASE, 0x18), + DEFINE_RES_IRQ(IRQ_EP93XX_SSP), }; static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32); @@ -513,7 +482,7 @@ void __init ep93xx_register_spi(struct ep93xx_spi_info *info, /************************************************************************* * EP93xx LEDs *************************************************************************/ -static struct gpio_led ep93xx_led_pins[] = { +static const struct gpio_led ep93xx_led_pins[] __initconst = { { .name = "platform:grled", .gpio = EP93XX_GPIO_LINE_GRLED, @@ -523,29 +492,16 @@ static struct gpio_led ep93xx_led_pins[] = { }, }; -static struct gpio_led_platform_data ep93xx_led_data = { +static const struct gpio_led_platform_data ep93xx_led_data __initconst = { .num_leds = ARRAY_SIZE(ep93xx_led_pins), .leds = ep93xx_led_pins, }; -static struct platform_device ep93xx_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &ep93xx_led_data, - }, -}; - - /************************************************************************* * EP93xx pwm peripheral handling *************************************************************************/ static struct resource ep93xx_pwm0_resource[] = { - { - .start = EP93XX_PWM_PHYS_BASE, - .end = EP93XX_PWM_PHYS_BASE + 0x10 - 1, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE, 0x10), }; static struct platform_device ep93xx_pwm0_device = { @@ -556,11 +512,7 @@ static struct platform_device ep93xx_pwm0_device = { }; static struct resource ep93xx_pwm1_resource[] = { - { - .start = EP93XX_PWM_PHYS_BASE + 0x20, - .end = EP93XX_PWM_PHYS_BASE + 0x30 - 1, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE + 0x20, 0x10), }; static struct platform_device ep93xx_pwm1_device = { @@ -628,11 +580,7 @@ EXPORT_SYMBOL(ep93xx_pwm_release_gpio); static struct ep93xxfb_mach_info ep93xxfb_data; static struct resource ep93xx_fb_resource[] = { - { - .start = EP93XX_RASTER_PHYS_BASE, - .end = EP93XX_RASTER_PHYS_BASE + 0x800 - 1, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE, 0x800), }; static struct platform_device ep93xx_fb_device = { @@ -680,15 +628,8 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data) static struct ep93xx_keypad_platform_data ep93xx_keypad_data; static struct resource ep93xx_keypad_resource[] = { - { - .start = EP93XX_KEY_MATRIX_PHYS_BASE, - .end = EP93XX_KEY_MATRIX_PHYS_BASE + 0x0c - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_EP93XX_KEY, - .end = IRQ_EP93XX_KEY, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(EP93XX_KEY_MATRIX_PHYS_BASE, 0x0c), + DEFINE_RES_IRQ(IRQ_EP93XX_KEY), }; static struct platform_device ep93xx_keypad_device = { @@ -761,11 +702,7 @@ EXPORT_SYMBOL(ep93xx_keypad_release_gpio); * EP93xx I2S audio peripheral handling *************************************************************************/ static struct resource ep93xx_i2s_resource[] = { - { - .start = EP93XX_I2S_PHYS_BASE, - .end = EP93XX_I2S_PHYS_BASE + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, + DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100), }; static struct platform_device ep93xx_i2s_device = { @@ -824,16 +761,8 @@ EXPORT_SYMBOL(ep93xx_i2s_release); * EP93xx AC97 audio peripheral handling *************************************************************************/ static struct resource ep93xx_ac97_resources[] = { - { - .start = EP93XX_AAC_PHYS_BASE, - .end = EP93XX_AAC_PHYS_BASE + 0xac - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_EP93XX_AACINTR, - .end = IRQ_EP93XX_AACINTR, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(EP93XX_AAC_PHYS_BASE, 0xac), + DEFINE_RES_IRQ(IRQ_EP93XX_AACINTR), }; static struct platform_device ep93xx_ac97_device = { @@ -889,8 +818,9 @@ void __init ep93xx_init_devices(void) platform_device_register(&ep93xx_rtc_device); platform_device_register(&ep93xx_ohci_device); - platform_device_register(&ep93xx_leds); platform_device_register(&ep93xx_wdt_device); + + gpio_led_register_device(-1, &ep93xx_led_data); } void ep93xx_restart(char mode, const char *cmd) diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c index 33ab4e7558af..26dac2893b8e 100644 --- a/arch/arm/mach-exynos/cpuidle.c +++ b/arch/arm/mach-exynos/cpuidle.c @@ -20,6 +20,7 @@ #include <asm/smp_scu.h> #include <asm/suspend.h> #include <asm/unified.h> +#include <asm/cpuidle.h> #include <mach/regs-pmu.h> #include <mach/pmu.h> @@ -34,22 +35,12 @@ #define S5P_CHECK_AFTR 0xFCBA0D10 -static int exynos4_enter_idle(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index); static int exynos4_enter_lowpower(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); static struct cpuidle_state exynos4_cpuidle_set[] __initdata = { - [0] = { - .enter = exynos4_enter_idle, - .exit_latency = 1, - .target_residency = 100000, - .flags = CPUIDLE_FLAG_TIME_VALID, - .name = "C0", - .desc = "ARM clock gating(WFI)", - }, + [0] = ARM_CPUIDLE_WFI_STATE, [1] = { .enter = exynos4_enter_lowpower, .exit_latency = 300, @@ -63,8 +54,9 @@ static struct cpuidle_state exynos4_cpuidle_set[] __initdata = { static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device); static struct cpuidle_driver exynos4_idle_driver = { - .name = "exynos4_idle", - .owner = THIS_MODULE, + .name = "exynos4_idle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, }; /* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */ @@ -103,13 +95,8 @@ static int exynos4_enter_core0_aftr(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct timeval before, after; - int idle_time; unsigned long tmp; - local_irq_disable(); - do_gettimeofday(&before); - exynos4_set_wakeupmask(); /* Set value of power down register for aftr mode */ @@ -150,34 +137,6 @@ static int exynos4_enter_core0_aftr(struct cpuidle_device *dev, /* Clear wakeup state register */ __raw_writel(0x0, S5P_WAKEUP_STAT); - do_gettimeofday(&after); - - local_irq_enable(); - idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + - (after.tv_usec - before.tv_usec); - - dev->last_residency = idle_time; - return index; -} - -static int exynos4_enter_idle(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - struct timeval before, after; - int idle_time; - - local_irq_disable(); - do_gettimeofday(&before); - - cpu_do_idle(); - - do_gettimeofday(&after); - local_irq_enable(); - idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + - (after.tv_usec - before.tv_usec); - - dev->last_residency = idle_time; return index; } @@ -192,7 +151,7 @@ static int exynos4_enter_lowpower(struct cpuidle_device *dev, new_index = drv->safe_state_index; if (new_index == 0) - return exynos4_enter_idle(dev, drv, new_index); + return arm_cpuidle_simple_enter(dev, drv, new_index); else return exynos4_enter_core0_aftr(dev, drv, new_index); } diff --git a/arch/arm/mach-exynos/dev-ahci.c b/arch/arm/mach-exynos/dev-ahci.c index 50ce5b0adcf1..ce1aad3eeeb9 100644 --- a/arch/arm/mach-exynos/dev-ahci.c +++ b/arch/arm/mach-exynos/dev-ahci.c @@ -236,16 +236,8 @@ static struct ahci_platform_data exynos4_ahci_pdata = { }; static struct resource exynos4_ahci_resource[] = { - [0] = { - .start = EXYNOS4_PA_SATA, - .end = EXYNOS4_PA_SATA + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = EXYNOS4_IRQ_SATA, - .end = EXYNOS4_IRQ_SATA, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(EXYNOS4_PA_SATA, SZ_64K), + [1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_SATA), }; static u64 exynos4_ahci_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c index 7199e1ae79b4..b33a5b67b547 100644 --- a/arch/arm/mach-exynos/dev-audio.c +++ b/arch/arm/mach-exynos/dev-audio.c @@ -62,26 +62,10 @@ static struct s3c_audio_pdata i2sv5_pdata = { }; static struct resource exynos4_i2s0_resource[] = { - [0] = { - .start = EXYNOS4_PA_I2S0, - .end = EXYNOS4_PA_I2S0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S0_TX, - .end = DMACH_I2S0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S0_RX, - .end = DMACH_I2S0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DMACH_I2S0S_TX, - .end = DMACH_I2S0S_TX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(EXYNOS4_PA_I2S0, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S0_TX), + [2] = DEFINE_RES_DMA(DMACH_I2S0_RX), + [3] = DEFINE_RES_DMA(DMACH_I2S0S_TX), }; struct platform_device exynos4_device_i2s0 = { @@ -110,21 +94,9 @@ static struct s3c_audio_pdata i2sv3_pdata = { }; static struct resource exynos4_i2s1_resource[] = { - [0] = { - .start = EXYNOS4_PA_I2S1, - .end = EXYNOS4_PA_I2S1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S1_TX, - .end = DMACH_I2S1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S1_RX, - .end = DMACH_I2S1_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(EXYNOS4_PA_I2S1, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S1_TX), + [2] = DEFINE_RES_DMA(DMACH_I2S1_RX), }; struct platform_device exynos4_device_i2s1 = { @@ -138,21 +110,9 @@ struct platform_device exynos4_device_i2s1 = { }; static struct resource exynos4_i2s2_resource[] = { - [0] = { - .start = EXYNOS4_PA_I2S2, - .end = EXYNOS4_PA_I2S2 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S2_TX, - .end = DMACH_I2S2_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S2_RX, - .end = DMACH_I2S2_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(EXYNOS4_PA_I2S2, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S2_TX), + [2] = DEFINE_RES_DMA(DMACH_I2S2_RX), }; struct platform_device exynos4_device_i2s2 = { @@ -192,21 +152,9 @@ static struct s3c_audio_pdata s3c_pcm_pdata = { }; static struct resource exynos4_pcm0_resource[] = { - [0] = { - .start = EXYNOS4_PA_PCM0, - .end = EXYNOS4_PA_PCM0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM0_TX, - .end = DMACH_PCM0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM0_RX, - .end = DMACH_PCM0_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(EXYNOS4_PA_PCM0, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_PCM0_TX), + [2] = DEFINE_RES_DMA(DMACH_PCM0_RX), }; struct platform_device exynos4_device_pcm0 = { @@ -220,21 +168,9 @@ struct platform_device exynos4_device_pcm0 = { }; static struct resource exynos4_pcm1_resource[] = { - [0] = { - .start = EXYNOS4_PA_PCM1, - .end = EXYNOS4_PA_PCM1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM1_TX, - .end = DMACH_PCM1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM1_RX, - .end = DMACH_PCM1_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(EXYNOS4_PA_PCM1, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_PCM1_TX), + [2] = DEFINE_RES_DMA(DMACH_PCM1_RX), }; struct platform_device exynos4_device_pcm1 = { @@ -248,21 +184,9 @@ struct platform_device exynos4_device_pcm1 = { }; static struct resource exynos4_pcm2_resource[] = { - [0] = { - .start = EXYNOS4_PA_PCM2, - .end = EXYNOS4_PA_PCM2 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM2_TX, - .end = DMACH_PCM2_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM2_RX, - .end = DMACH_PCM2_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(EXYNOS4_PA_PCM2, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_PCM2_TX), + [2] = DEFINE_RES_DMA(DMACH_PCM2_RX), }; struct platform_device exynos4_device_pcm2 = { @@ -283,31 +207,11 @@ static int exynos4_ac97_cfg_gpio(struct platform_device *pdev) } static struct resource exynos4_ac97_resource[] = { - [0] = { - .start = EXYNOS4_PA_AC97, - .end = EXYNOS4_PA_AC97 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_AC97_PCMOUT, - .end = DMACH_AC97_PCMOUT, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_AC97_PCMIN, - .end = DMACH_AC97_PCMIN, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DMACH_AC97_MICIN, - .end = DMACH_AC97_MICIN, - .flags = IORESOURCE_DMA, - }, - [4] = { - .start = EXYNOS4_IRQ_AC97, - .end = EXYNOS4_IRQ_AC97, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(EXYNOS4_PA_AC97, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT), + [2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN), + [3] = DEFINE_RES_DMA(DMACH_AC97_MICIN), + [4] = DEFINE_RES_IRQ(EXYNOS4_IRQ_AC97), }; static struct s3c_audio_pdata s3c_ac97_pdata = { @@ -338,16 +242,8 @@ static int exynos4_spdif_cfg_gpio(struct platform_device *pdev) } static struct resource exynos4_spdif_resource[] = { - [0] = { - .start = EXYNOS4_PA_SPDIF, - .end = EXYNOS4_PA_SPDIF + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPDIF, - .end = DMACH_SPDIF, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(EXYNOS4_PA_SPDIF, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_SPDIF), }; static struct s3c_audio_pdata samsung_spdif_pdata = { diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c index d726fcd3acf9..fed7116418eb 100644 --- a/arch/arm/mach-exynos/mach-armlex4210.c +++ b/arch/arm/mach-exynos/mach-armlex4210.c @@ -77,7 +77,6 @@ static struct s3c2410_uartcfg armlex4210_uartcfgs[] __initdata = { static struct s3c_sdhci_platdata armlex4210_hsmmc0_pdata __initdata = { .cd_type = S3C_SDHCI_CD_PERMANENT, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, #ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT .max_width = 8, .host_caps = MMC_CAP_8_BIT_DATA, @@ -88,13 +87,11 @@ static struct s3c_sdhci_platdata armlex4210_hsmmc2_pdata __initdata = { .cd_type = S3C_SDHCI_CD_GPIO, .ext_cd_gpio = EXYNOS4_GPX2(5), .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, .max_width = 4, }; static struct s3c_sdhci_platdata armlex4210_hsmmc3_pdata __initdata = { .cd_type = S3C_SDHCI_CD_PERMANENT, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, .max_width = 4, }; @@ -121,16 +118,9 @@ static void __init armlex4210_wlan_init(void) } static struct resource armlex4210_smsc911x_resources[] = { - [0] = { - .start = EXYNOS4_PA_SROM_BANK(3), - .end = EXYNOS4_PA_SROM_BANK(3) + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_EINT(27), - .end = IRQ_EINT(27), - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, - }, + [0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(3), SZ_64K), + [1] = DEFINE_RES_NAMED(IRQ_EINT(27), 1, NULL, IORESOURCE_IRQ \ + | IRQF_TRIGGER_HIGH), }; static struct smsc911x_platform_config smsc9215_config = { diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index ed90aef404c3..021dc68e89b5 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -114,7 +114,6 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = { MMC_CAP_ERASE), .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; static struct regulator_consumer_supply emmc_supplies[] = { @@ -155,7 +154,6 @@ static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = { .ext_cd_gpio = EXYNOS4_GPX3(3), /* XEINT_27 */ .ext_cd_gpio_invert = 1, .cd_type = S3C_SDHCI_CD_GPIO, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; /* WLAN */ @@ -164,7 +162,6 @@ static struct s3c_sdhci_platdata nuri_hsmmc3_data __initdata = { .host_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, .cd_type = S3C_SDHCI_CD_EXTERNAL, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; static void __init nuri_sdhci_init(void) diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 878d4c99142d..827cb990c316 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -472,12 +472,10 @@ static struct i2c_board_info i2c0_devs[] __initdata = { static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = { .cd_type = S3C_SDHCI_CD_INTERNAL, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = { .cd_type = S3C_SDHCI_CD_INTERNAL, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; /* USB EHCI */ diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index d00e4f016a68..4be083acf994 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -85,7 +85,6 @@ static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = { static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = { .cd_type = S3C_SDHCI_CD_INTERNAL, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, #ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT .max_width = 8, .host_caps = MMC_CAP_8_BIT_DATA, @@ -94,7 +93,6 @@ static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = { static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = { .cd_type = S3C_SDHCI_CD_INTERNAL, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; static struct regulator_consumer_supply max8997_buck1 = diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 83b91fa777c1..ea39f614f2db 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -93,7 +93,6 @@ static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = { static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = { .cd_type = S3C_SDHCI_CD_INTERNAL, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, #ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT .max_width = 8, .host_caps = MMC_CAP_8_BIT_DATA, @@ -104,12 +103,10 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = { .cd_type = S3C_SDHCI_CD_GPIO, .ext_cd_gpio = EXYNOS4_GPK0(2), .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = { .cd_type = S3C_SDHCI_CD_INTERNAL, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, #ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT .max_width = 8, .host_caps = MMC_CAP_8_BIT_DATA, @@ -120,7 +117,6 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = { .cd_type = S3C_SDHCI_CD_GPIO, .ext_cd_gpio = EXYNOS4_GPK2(2), .ext_cd_gpio_invert = 1, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; static void lcd_lte480wv_set_power(struct plat_lcd_data *pd, @@ -183,16 +179,9 @@ static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = { }; static struct resource smdkv310_smsc911x_resources[] = { - [0] = { - .start = EXYNOS4_PA_SROM_BANK(1), - .end = EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_EINT(5), - .end = IRQ_EINT(5), - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, - }, + [0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(1), SZ_64K), + [1] = DEFINE_RES_NAMED(IRQ_EINT(5), 1, NULL, IORESOURCE_IRQ \ + | IRQF_TRIGGER_LOW), }; static struct smsc911x_platform_config smsc9215_config = { diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index cb2b027f09a6..add55b432d78 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -749,7 +749,6 @@ static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; static struct regulator_consumer_supply mmc0_supplies[] = { @@ -789,7 +788,6 @@ static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = { .ext_cd_gpio = EXYNOS4_GPX3(4), /* XEINT_28 */ .ext_cd_gpio_invert = 1, .cd_type = S3C_SDHCI_CD_GPIO, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; /* WiFi */ diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 7561eca131b0..f72d399ff3d6 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -571,8 +571,10 @@ config MACH_MX35_3DS select MXC_DEBUG_BOARD select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 5f2f91d1798b..b46cab0ced53 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -243,7 +243,7 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __maybe_unused ads7846_dev_init(void) { if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) { - printk(KERN_ERR "can't get ads746 pen down GPIO\n"); + printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); return; } gpio_direction_input(ADS7846_PENDOWN); diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 8ecc872b2547..c515f8ede1a1 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -194,7 +194,7 @@ static void __init eukrea_cpuimx35_timer_init(void) mx35_clocks_init(); } -struct sys_timer eukrea_cpuimx35_timer = { +static struct sys_timer eukrea_cpuimx35_timer = { .init = eukrea_cpuimx35_timer_init, }; diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 97046088ff1a..7274e7928136 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -134,7 +134,7 @@ static void __init mx1ads_timer_init(void) mx1_clocks_init(32000); } -struct sys_timer mx1ads_timer = { +static struct sys_timer mx1ads_timer = { .init = mx1ads_timer_init, }; diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index e432d4acee1f..d14bbe949a4f 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -304,8 +304,7 @@ static void __init mx21ads_board_init(void) imx21_add_mxc_nand(&mx21ads_nand_board_info); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - platform_device_register_full( - (struct platform_device_info *)&mx21ads_cs8900_devinfo); + platform_device_register_full(&mx21ads_cs8900_devinfo); } static void __init mx21ads_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index 0abef5f13df5..686c60587980 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -283,7 +283,7 @@ static void __init mx31lite_timer_init(void) mx31_clocks_init(26000000); } -struct sys_timer mx31lite_timer = { +static struct sys_timer mx31lite_timer = { .init = mx31lite_timer_init, }; diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index f17a15f28316..1dfe3c7a7be1 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -580,7 +580,7 @@ static void __init mx31moboard_timer_init(void) mx31_clocks_init(26000000); } -struct sys_timer mx31moboard_timer = { +static struct sys_timer mx31moboard_timer = { .init = mx31moboard_timer_init, }; diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 6ae51c6b95b7..c433187988a2 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -419,7 +419,7 @@ static void __init mx35pdk_timer_init(void) mx35_clocks_init(); } -struct sys_timer mx35pdk_timer = { +static struct sys_timer mx35pdk_timer = { .init = mx35pdk_timer_init, }; diff --git a/arch/arm/mach-imx/mach-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c index 586e9f822124..86e96ef11f9d 100644 --- a/arch/arm/mach-imx/mach-mx51_efikamx.c +++ b/arch/arm/mach-imx/mach-mx51_efikamx.c @@ -284,8 +284,7 @@ static struct sys_timer mx51_efikamx_timer = { .init = mx51_efikamx_timer_init, }; -MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop") - /* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */ +MACHINE_START(MX51_EFIKAMX, "Genesi Efika MX (Smarttop)") .atag_offset = 0x100, .map_io = mx51_map_io, .init_early = imx51_init_early, diff --git a/arch/arm/mach-imx/mach-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c index 24aded9e109f..88f837a6cc76 100644 --- a/arch/arm/mach-imx/mach-mx51_efikasb.c +++ b/arch/arm/mach-imx/mach-mx51_efikasb.c @@ -280,7 +280,7 @@ static struct sys_timer mx51_efikasb_timer = { .init = mx51_efikasb_timer_init, }; -MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook") +MACHINE_START(MX51_EFIKASB, "Genesi Efika MX (Smartbook)") .atag_offset = 0x100, .map_io = mx51_map_io, .init_early = imx51_init_early, diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 5fddf94cc969..10c9795934a3 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -683,7 +683,7 @@ static void __init pcm037_timer_init(void) mx31_clocks_init(26000000); } -struct sys_timer pcm037_timer = { +static struct sys_timer pcm037_timer = { .init = pcm037_timer_init, }; diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 237474fcca23..73585f55cca0 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -399,7 +399,7 @@ static void __init pcm043_timer_init(void) mx35_clocks_init(); } -struct sys_timer pcm043_timer = { +static struct sys_timer pcm043_timer = { .init = pcm043_timer_init, }; diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index 033257e553ef..add8c69c6c1a 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -310,7 +310,7 @@ static void __init vpr200_timer_init(void) mx35_clocks_init(); } -struct sys_timer vpr200_timer = { +static struct sys_timer vpr200_timer = { .init = vpr200_timer_init, }; diff --git a/arch/arm/mach-ixp2000/Kconfig b/arch/arm/mach-ixp2000/Kconfig deleted file mode 100644 index 08d2707f6ca8..000000000000 --- a/arch/arm/mach-ixp2000/Kconfig +++ /dev/null @@ -1,72 +0,0 @@ - -if ARCH_IXP2000 - -config ARCH_SUPPORTS_BIG_ENDIAN - bool - default y - -menu "Intel IXP2400/2800 Implementation Options" - -comment "IXP2400/2800 Platforms" - -config ARCH_ENP2611 - bool "Support Radisys ENP-2611" - help - Say 'Y' here if you want your kernel to support the Radisys - ENP2611 PCI network processing card. For more information on - this card, see <file:Documentation/arm/IXP2000>. - -config ARCH_IXDP2400 - bool "Support Intel IXDP2400" - help - Say 'Y' here if you want your kernel to support the Intel - IXDP2400 reference platform. For more information on - this platform, see <file:Documentation/arm/IXP2000>. - -config ARCH_IXDP2800 - bool "Support Intel IXDP2800" - help - Say 'Y' here if you want your kernel to support the Intel - IXDP2800 reference platform. For more information on - this platform, see <file:Documentation/arm/IXP2000>. - -config ARCH_IXDP2X00 - bool - depends on ARCH_IXDP2400 || ARCH_IXDP2800 - default y - -config ARCH_IXDP2401 - bool "Support Intel IXDP2401" - help - Say 'Y' here if you want your kernel to support the Intel - IXDP2401 reference platform. For more information on - this platform, see <file:Documentation/arm/IXP2000>. - -config ARCH_IXDP2801 - bool "Support Intel IXDP2801 and IXDP28x5" - help - Say 'Y' here if you want your kernel to support the Intel - IXDP2801/2805/2855 reference platforms. For more information on - this platform, see <file:Documentation/arm/IXP2000>. - -config MACH_IXDP28X5 - bool - depends on ARCH_IXDP2801 - default y - -config ARCH_IXDP2X01 - bool - depends on ARCH_IXDP2401 || ARCH_IXDP2801 - default y - -config IXP2000_SUPPORT_BROKEN_PCI_IO - bool "Support broken PCI I/O on older IXP2000s" - default y - help - Say 'N' here if you only intend to run your kernel on an - IXP2000 B0 or later model and do not need the PCI I/O - byteswap workaround. Say 'Y' otherwise. - -endmenu - -endif diff --git a/arch/arm/mach-ixp2000/Makefile b/arch/arm/mach-ixp2000/Makefile deleted file mode 100644 index 1e6139d42a92..000000000000 --- a/arch/arm/mach-ixp2000/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# -# Makefile for the linux kernel. -# -obj-y := core.o pci.o -obj-m := -obj-n := -obj- := - -obj-$(CONFIG_ARCH_ENP2611) += enp2611.o -obj-$(CONFIG_ARCH_IXDP2400) += ixdp2400.o -obj-$(CONFIG_ARCH_IXDP2800) += ixdp2800.o -obj-$(CONFIG_ARCH_IXDP2X00) += ixdp2x00.o -obj-$(CONFIG_ARCH_IXDP2X01) += ixdp2x01.o - diff --git a/arch/arm/mach-ixp2000/Makefile.boot b/arch/arm/mach-ixp2000/Makefile.boot deleted file mode 100644 index 9c7af91d93da..000000000000 --- a/arch/arm/mach-ixp2000/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 - diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c deleted file mode 100644 index f214cdff01cb..000000000000 --- a/arch/arm/mach-ixp2000/core.c +++ /dev/null @@ -1,520 +0,0 @@ -/* - * arch/arm/mach-ixp2000/core.c - * - * Common routines used by all IXP2400/2800 based platforms. - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2004 (C) MontaVista Software, Inc. - * - * Based on work Copyright (C) 2002-2003 Intel Corporation - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/bitops.h> -#include <linux/serial_8250.h> -#include <linux/mm.h> -#include <linux/export.h> - -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/tlbflush.h> -#include <asm/pgtable.h> - -#include <asm/mach/map.h> -#include <asm/mach/time.h> -#include <asm/mach/irq.h> - -#include <mach/gpio-ixp2000.h> - -static DEFINE_SPINLOCK(ixp2000_slowport_lock); -static unsigned long ixp2000_slowport_irq_flags; - -/************************************************************************* - * Slowport access routines - *************************************************************************/ -void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg *old_cfg) -{ - spin_lock_irqsave(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags); - - old_cfg->CCR = *IXP2000_SLOWPORT_CCR; - old_cfg->WTC = *IXP2000_SLOWPORT_WTC2; - old_cfg->RTC = *IXP2000_SLOWPORT_RTC2; - old_cfg->PCR = *IXP2000_SLOWPORT_PCR; - old_cfg->ADC = *IXP2000_SLOWPORT_ADC; - - ixp2000_reg_write(IXP2000_SLOWPORT_CCR, new_cfg->CCR); - ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, new_cfg->WTC); - ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, new_cfg->RTC); - ixp2000_reg_write(IXP2000_SLOWPORT_PCR, new_cfg->PCR); - ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, new_cfg->ADC); -} - -void ixp2000_release_slowport(struct slowport_cfg *old_cfg) -{ - ixp2000_reg_write(IXP2000_SLOWPORT_CCR, old_cfg->CCR); - ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, old_cfg->WTC); - ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, old_cfg->RTC); - ixp2000_reg_write(IXP2000_SLOWPORT_PCR, old_cfg->PCR); - ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, old_cfg->ADC); - - spin_unlock_irqrestore(&ixp2000_slowport_lock, - ixp2000_slowport_irq_flags); -} - -/************************************************************************* - * Chip specific mappings shared by all IXP2000 systems - *************************************************************************/ -static struct map_desc ixp2000_io_desc[] __initdata = { - { - .virtual = IXP2000_CAP_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_CAP_PHYS_BASE), - .length = IXP2000_CAP_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IXP2000_INTCTL_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE), - .length = IXP2000_INTCTL_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IXP2000_PCI_CREG_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE), - .length = IXP2000_PCI_CREG_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IXP2000_PCI_CSR_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE), - .length = IXP2000_PCI_CSR_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IXP2000_MSF_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_MSF_PHYS_BASE), - .length = IXP2000_MSF_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IXP2000_SCRATCH_RING_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_SCRATCH_RING_PHYS_BASE), - .length = IXP2000_SCRATCH_RING_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IXP2000_SRAM0_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_SRAM0_PHYS_BASE), - .length = IXP2000_SRAM0_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IXP2000_PCI_IO_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE), - .length = IXP2000_PCI_IO_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IXP2000_PCI_CFG0_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE), - .length = IXP2000_PCI_CFG0_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IXP2000_PCI_CFG1_VIRT_BASE, - .pfn = __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE), - .length = IXP2000_PCI_CFG1_SIZE, - .type = MT_DEVICE, - } -}; - -void __init ixp2000_map_io(void) -{ - iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc)); - - /* Set slowport to 8-bit mode. */ - ixp2000_reg_wrb(IXP2000_SLOWPORT_FRM, 1); -} - - -/************************************************************************* - * Serial port support for IXP2000 - *************************************************************************/ -static struct plat_serial8250_port ixp2000_serial_port[] = { - { - .mapbase = IXP2000_UART_PHYS_BASE, - .membase = (char *)(IXP2000_UART_VIRT_BASE + 3), - .irq = IRQ_IXP2000_UART, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 50000000, - }, - { }, -}; - -static struct resource ixp2000_uart_resource = { - .start = IXP2000_UART_PHYS_BASE, - .end = IXP2000_UART_PHYS_BASE + 0x1f, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ixp2000_serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = ixp2000_serial_port, - }, - .num_resources = 1, - .resource = &ixp2000_uart_resource, -}; - -void __init ixp2000_uart_init(void) -{ - platform_device_register(&ixp2000_serial_device); -} - - -/************************************************************************* - * Timer-tick functions for IXP2000 - *************************************************************************/ -static unsigned ticks_per_jiffy; -static unsigned ticks_per_usec; -static unsigned next_jiffy_time; -static volatile unsigned long *missing_jiffy_timer_csr; - -unsigned long ixp2000_gettimeoffset (void) -{ - unsigned long offset; - - offset = next_jiffy_time - *missing_jiffy_timer_csr; - - return offset / ticks_per_usec; -} - -static irqreturn_t ixp2000_timer_interrupt(int irq, void *dev_id) -{ - /* clear timer 1 */ - ixp2000_reg_wrb(IXP2000_T1_CLR, 1); - - while ((signed long)(next_jiffy_time - *missing_jiffy_timer_csr) - >= ticks_per_jiffy) { - timer_tick(); - next_jiffy_time -= ticks_per_jiffy; - } - - return IRQ_HANDLED; -} - -static struct irqaction ixp2000_timer_irq = { - .name = "IXP2000 Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = ixp2000_timer_interrupt, -}; - -void __init ixp2000_init_time(unsigned long tick_rate) -{ - ticks_per_jiffy = (tick_rate + HZ/2) / HZ; - ticks_per_usec = tick_rate / 1000000; - - /* - * We use timer 1 as our timer interrupt. - */ - ixp2000_reg_write(IXP2000_T1_CLR, 0); - ixp2000_reg_write(IXP2000_T1_CLD, ticks_per_jiffy - 1); - ixp2000_reg_write(IXP2000_T1_CTL, (1 << 7)); - - /* - * We use a second timer as a monotonic counter for tracking - * missed jiffies. The IXP2000 has four timers, but if we're - * on an A-step IXP2800, timer 2 and 3 don't work, so on those - * chips we use timer 4. Timer 4 is the only timer that can - * be used for the watchdog, so we use timer 2 if we're on a - * non-buggy chip. - */ - if ((*IXP2000_PRODUCT_ID & 0x001ffef0) == 0x00000000) { - printk(KERN_INFO "Enabling IXP2800 erratum #25 workaround\n"); - - ixp2000_reg_write(IXP2000_T4_CLR, 0); - ixp2000_reg_write(IXP2000_T4_CLD, -1); - ixp2000_reg_wrb(IXP2000_T4_CTL, (1 << 7)); - missing_jiffy_timer_csr = IXP2000_T4_CSR; - } else { - ixp2000_reg_write(IXP2000_T2_CLR, 0); - ixp2000_reg_write(IXP2000_T2_CLD, -1); - ixp2000_reg_wrb(IXP2000_T2_CTL, (1 << 7)); - missing_jiffy_timer_csr = IXP2000_T2_CSR; - } - next_jiffy_time = 0xffffffff; - - /* register for interrupt */ - setup_irq(IRQ_IXP2000_TIMER1, &ixp2000_timer_irq); -} - -/************************************************************************* - * GPIO helpers - *************************************************************************/ -static unsigned long GPIO_IRQ_falling_edge; -static unsigned long GPIO_IRQ_rising_edge; -static unsigned long GPIO_IRQ_level_low; -static unsigned long GPIO_IRQ_level_high; - -static void update_gpio_int_csrs(void) -{ - ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge); - ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge); - ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low); - ixp2000_reg_wrb(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); -} - -void gpio_line_config(int line, int direction) -{ - unsigned long flags; - - local_irq_save(flags); - if (direction == GPIO_OUT) { - /* if it's an output, it ain't an interrupt anymore */ - GPIO_IRQ_falling_edge &= ~(1 << line); - GPIO_IRQ_rising_edge &= ~(1 << line); - GPIO_IRQ_level_low &= ~(1 << line); - GPIO_IRQ_level_high &= ~(1 << line); - update_gpio_int_csrs(); - - ixp2000_reg_wrb(IXP2000_GPIO_PDSR, 1 << line); - } else if (direction == GPIO_IN) { - ixp2000_reg_wrb(IXP2000_GPIO_PDCR, 1 << line); - } - local_irq_restore(flags); -} -EXPORT_SYMBOL(gpio_line_config); - - -/************************************************************************* - * IRQ handling IXP2000 - *************************************************************************/ -static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - int i; - unsigned long status = *IXP2000_GPIO_INST; - - for (i = 0; i <= 7; i++) { - if (status & (1<<i)) { - generic_handle_irq(i + IRQ_IXP2000_GPIO0); - } - } -} - -static int ixp2000_GPIO_irq_type(struct irq_data *d, unsigned int type) -{ - int line = d->irq - IRQ_IXP2000_GPIO0; - - /* - * First, configure this GPIO line as an input. - */ - ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line); - - /* - * Then, set the proper trigger type. - */ - if (type & IRQ_TYPE_EDGE_FALLING) - GPIO_IRQ_falling_edge |= 1 << line; - else - GPIO_IRQ_falling_edge &= ~(1 << line); - if (type & IRQ_TYPE_EDGE_RISING) - GPIO_IRQ_rising_edge |= 1 << line; - else - GPIO_IRQ_rising_edge &= ~(1 << line); - if (type & IRQ_TYPE_LEVEL_LOW) - GPIO_IRQ_level_low |= 1 << line; - else - GPIO_IRQ_level_low &= ~(1 << line); - if (type & IRQ_TYPE_LEVEL_HIGH) - GPIO_IRQ_level_high |= 1 << line; - else - GPIO_IRQ_level_high &= ~(1 << line); - update_gpio_int_csrs(); - - return 0; -} - -static void ixp2000_GPIO_irq_mask_ack(struct irq_data *d) -{ - unsigned int irq = d->irq; - - ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); - - ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); - ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); - ixp2000_reg_wrb(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0))); -} - -static void ixp2000_GPIO_irq_mask(struct irq_data *d) -{ - unsigned int irq = d->irq; - - ixp2000_reg_wrb(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); -} - -static void ixp2000_GPIO_irq_unmask(struct irq_data *d) -{ - unsigned int irq = d->irq; - - ixp2000_reg_write(IXP2000_GPIO_INSR, (1 << (irq - IRQ_IXP2000_GPIO0))); -} - -static struct irq_chip ixp2000_GPIO_irq_chip = { - .irq_ack = ixp2000_GPIO_irq_mask_ack, - .irq_mask = ixp2000_GPIO_irq_mask, - .irq_unmask = ixp2000_GPIO_irq_unmask, - .irq_set_type = ixp2000_GPIO_irq_type, -}; - -static void ixp2000_pci_irq_mask(struct irq_data *d) -{ - unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE; - if (d->irq == IRQ_IXP2000_PCIA) - ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26))); - else if (d->irq == IRQ_IXP2000_PCIB) - ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27))); -} - -static void ixp2000_pci_irq_unmask(struct irq_data *d) -{ - unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE; - if (d->irq == IRQ_IXP2000_PCIA) - ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 26))); - else if (d->irq == IRQ_IXP2000_PCIB) - ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 27))); -} - -/* - * Error interrupts. These are used extensively by the microengine drivers - */ -static void ixp2000_err_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - int i; - unsigned long status = *IXP2000_IRQ_ERR_STATUS; - - for(i = 31; i >= 0; i--) { - if(status & (1 << i)) { - generic_handle_irq(IRQ_IXP2000_DRAM0_MIN_ERR + i); - } - } -} - -static void ixp2000_err_irq_mask(struct irq_data *d) -{ - ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_CLR, - (1 << (d->irq - IRQ_IXP2000_DRAM0_MIN_ERR))); -} - -static void ixp2000_err_irq_unmask(struct irq_data *d) -{ - ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_SET, - (1 << (d->irq - IRQ_IXP2000_DRAM0_MIN_ERR))); -} - -static struct irq_chip ixp2000_err_irq_chip = { - .irq_ack = ixp2000_err_irq_mask, - .irq_mask = ixp2000_err_irq_mask, - .irq_unmask = ixp2000_err_irq_unmask -}; - -static struct irq_chip ixp2000_pci_irq_chip = { - .irq_ack = ixp2000_pci_irq_mask, - .irq_mask = ixp2000_pci_irq_mask, - .irq_unmask = ixp2000_pci_irq_unmask -}; - -static void ixp2000_irq_mask(struct irq_data *d) -{ - ixp2000_reg_wrb(IXP2000_IRQ_ENABLE_CLR, (1 << d->irq)); -} - -static void ixp2000_irq_unmask(struct irq_data *d) -{ - ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << d->irq)); -} - -static struct irq_chip ixp2000_irq_chip = { - .irq_ack = ixp2000_irq_mask, - .irq_mask = ixp2000_irq_mask, - .irq_unmask = ixp2000_irq_unmask -}; - -void __init ixp2000_init_irq(void) -{ - int irq; - - /* - * Mask all sources - */ - ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, 0xffffffff); - ixp2000_reg_write(IXP2000_FIQ_ENABLE_CLR, 0xffffffff); - - /* clear all GPIO edge/level detects */ - ixp2000_reg_write(IXP2000_GPIO_REDR, 0); - ixp2000_reg_write(IXP2000_GPIO_FEDR, 0); - ixp2000_reg_write(IXP2000_GPIO_LSHR, 0); - ixp2000_reg_write(IXP2000_GPIO_LSLR, 0); - ixp2000_reg_write(IXP2000_GPIO_INCR, -1); - - /* clear PCI interrupt sources */ - ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, 0); - - /* - * Certain bits in the IRQ status register of the - * IXP2000 are reserved. Instead of trying to map - * things non 1:1 from bit position to IRQ number, - * we mark the reserved IRQs as invalid. This makes - * our mask/unmask code much simpler. - */ - for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) { - if ((1 << irq) & IXP2000_VALID_IRQ_MASK) { - irq_set_chip_and_handler(irq, &ixp2000_irq_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } else set_irq_flags(irq, 0); - } - - for (irq = IRQ_IXP2000_DRAM0_MIN_ERR; irq <= IRQ_IXP2000_SP_INT; irq++) { - if((1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) & - IXP2000_VALID_ERR_IRQ_MASK) { - irq_set_chip_and_handler(irq, &ixp2000_err_irq_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - else - set_irq_flags(irq, 0); - } - irq_set_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler); - - for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) { - irq_set_chip_and_handler(irq, &ixp2000_GPIO_irq_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - irq_set_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler); - - /* - * Enable PCI irqs. The actual PCI[AB] decoding is done in - * entry-macro.S, so we don't need a chained handler for the - * PCI interrupt source. - */ - ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << IRQ_IXP2000_PCI)); - for (irq = IRQ_IXP2000_PCIA; irq <= IRQ_IXP2000_PCIB; irq++) { - irq_set_chip_and_handler(irq, &ixp2000_pci_irq_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } -} - -void ixp2000_restart(char mode, const char *cmd) -{ - ixp2000_reg_wrb(IXP2000_RESET0, RSTALL); -} diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c deleted file mode 100644 index 4867f408617c..000000000000 --- a/arch/arm/mach-ixp2000/enp2611.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - * arch/arm/mach-ixp2000/enp2611.c - * - * Radisys ENP-2611 support. - * - * Created 2004 by Lennert Buytenhek from the ixdp2x01 code. The - * original version carries the following notices: - * - * Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002-2003 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/bitops.h> -#include <linux/pci.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> - -#include <asm/mach/pci.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> - -/************************************************************************* - * ENP-2611 timer tick configuration - *************************************************************************/ -static void __init enp2611_timer_init(void) -{ - ixp2000_init_time(50 * 1000 * 1000); -} - -static struct sys_timer enp2611_timer = { - .init = enp2611_timer_init, - .offset = ixp2000_gettimeoffset, -}; - - -/************************************************************************* - * ENP-2611 I/O - *************************************************************************/ -static struct map_desc enp2611_io_desc[] __initdata = { - { - .virtual = ENP2611_CALEB_VIRT_BASE, - .pfn = __phys_to_pfn(ENP2611_CALEB_PHYS_BASE), - .length = ENP2611_CALEB_SIZE, - .type = MT_DEVICE, - }, { - .virtual = ENP2611_PM3386_0_VIRT_BASE, - .pfn = __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE), - .length = ENP2611_PM3386_0_SIZE, - .type = MT_DEVICE, - }, { - .virtual = ENP2611_PM3386_1_VIRT_BASE, - .pfn = __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE), - .length = ENP2611_PM3386_1_SIZE, - .type = MT_DEVICE, - } -}; - -void __init enp2611_map_io(void) -{ - ixp2000_map_io(); - iotable_init(enp2611_io_desc, ARRAY_SIZE(enp2611_io_desc)); -} - - -/************************************************************************* - * ENP-2611 PCI - *************************************************************************/ -static int enp2611_pci_setup(int nr, struct pci_sys_data *sys) -{ - sys->mem_offset = 0xe0000000; - ixp2000_pci_setup(nr, sys); - return 1; -} - -static void __init enp2611_pci_preinit(void) -{ - ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000); - ixp2000_pci_preinit(); - pcibios_setup("firmware"); -} - -static inline int enp2611_pci_valid_device(struct pci_bus *bus, - unsigned int devfn) -{ - /* The 82559 ethernet controller appears at both PCI:1:0:0 and - * PCI:1:2:0, so let's pretend the second one isn't there. - */ - if (bus->number == 0x01 && devfn == 0x10) - return 0; - - return 1; -} - -static int enp2611_pci_read_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *value) -{ - if (enp2611_pci_valid_device(bus, devfn)) - return ixp2000_pci_read_config(bus, devfn, where, size, value); - - return PCIBIOS_DEVICE_NOT_FOUND; -} - -static int enp2611_pci_write_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 value) -{ - if (enp2611_pci_valid_device(bus, devfn)) - return ixp2000_pci_write_config(bus, devfn, where, size, value); - - return PCIBIOS_DEVICE_NOT_FOUND; -} - -static struct pci_ops enp2611_pci_ops = { - .read = enp2611_pci_read_config, - .write = enp2611_pci_write_config -}; - -static struct pci_bus * __init enp2611_pci_scan_bus(int nr, - struct pci_sys_data *sys) -{ - return pci_scan_root_bus(NULL, sys->busnr, &enp2611_pci_ops, sys, - &sys->resources); -} - -static int __init enp2611_pci_map_irq(const struct pci_dev *dev, u8 slot, - u8 pin) -{ - int irq; - - if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 0) { - /* IXP2400. */ - irq = IRQ_IXP2000_PCIA; - } else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 1) { - /* 21555 non-transparent bridge. */ - irq = IRQ_IXP2000_PCIB; - } else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 4) { - /* PCI2050B transparent bridge. */ - irq = -1; - } else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 0) { - /* 82559 ethernet. */ - irq = IRQ_IXP2000_PCIA; - } else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 1) { - /* SPI-3 option board. */ - irq = IRQ_IXP2000_PCIB; - } else { - printk(KERN_ERR "enp2611_pci_map_irq() called for unknown " - "device PCI:%d:%d:%d\n", dev->bus->number, - PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); - irq = -1; - } - - return irq; -} - -struct hw_pci enp2611_pci __initdata = { - .nr_controllers = 1, - .setup = enp2611_pci_setup, - .preinit = enp2611_pci_preinit, - .scan = enp2611_pci_scan_bus, - .map_irq = enp2611_pci_map_irq, -}; - -int __init enp2611_pci_init(void) -{ - if (machine_is_enp2611()) - pci_common_init(&enp2611_pci); - - return 0; -} - -subsys_initcall(enp2611_pci_init); - - -/************************************************************************* - * ENP-2611 Machine Initialization - *************************************************************************/ -static struct flash_platform_data enp2611_flash_platform_data = { - .map_name = "cfi_probe", - .width = 1, -}; - -static struct ixp2000_flash_data enp2611_flash_data = { - .platform_data = &enp2611_flash_platform_data, - .nr_banks = 1 -}; - -static struct resource enp2611_flash_resource = { - .start = 0xc4000000, - .end = 0xc4000000 + 0x00ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device enp2611_flash = { - .name = "IXP2000-Flash", - .id = 0, - .dev = { - .platform_data = &enp2611_flash_data, - }, - .num_resources = 1, - .resource = &enp2611_flash_resource, -}; - -static struct ixp2000_i2c_pins enp2611_i2c_gpio_pins = { - .sda_pin = ENP2611_GPIO_SDA, - .scl_pin = ENP2611_GPIO_SCL, -}; - -static struct platform_device enp2611_i2c_controller = { - .name = "IXP2000-I2C", - .id = 0, - .dev = { - .platform_data = &enp2611_i2c_gpio_pins - }, - .num_resources = 0 -}; - -static struct platform_device *enp2611_devices[] __initdata = { - &enp2611_flash, - &enp2611_i2c_controller -}; - -static void __init enp2611_init_machine(void) -{ - platform_add_devices(enp2611_devices, ARRAY_SIZE(enp2611_devices)); - ixp2000_uart_init(); -} - - -MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board") - /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .atag_offset = 0x100, - .map_io = enp2611_map_io, - .init_irq = ixp2000_init_irq, - .timer = &enp2611_timer, - .init_machine = enp2611_init_machine, - .restart = ixp2000_restart, -MACHINE_END - - diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S deleted file mode 100644 index bdd3ccdc2890..000000000000 --- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S +++ /dev/null @@ -1,25 +0,0 @@ -/* arch/arm/mach-ixp2000/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart, rp, rv, tmp - mov \rp, #0x00030000 -#ifdef __ARMEB__ - orr \rp, \rp, #0x00000003 -#endif - orr \rv, \rp, #0xfe000000 @ virtual base - orr \rv, \rv, #0x00f00000 - orr \rp, \rp, #0xc0000000 @ Physical base - .endm - -#define UART_SHIFT 2 -#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-ixp2000/include/mach/enp2611.h b/arch/arm/mach-ixp2000/include/mach/enp2611.h deleted file mode 100644 index 9ce3690061d5..000000000000 --- a/arch/arm/mach-ixp2000/include/mach/enp2611.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/enp2611.h - * - * Register and other defines for Radisys ENP-2611 - * - * Created 2004 by Lennert Buytenhek from the ixdp2x01 code. The - * original version carries the following notices: - * - * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ENP2611_H -#define __ENP2611_H - -#define ENP2611_CALEB_PHYS_BASE 0xc5000000 -#define ENP2611_CALEB_VIRT_BASE 0xfe000000 -#define ENP2611_CALEB_SIZE 0x00100000 - -#define ENP2611_PM3386_0_PHYS_BASE 0xc6000000 -#define ENP2611_PM3386_0_VIRT_BASE 0xfe100000 -#define ENP2611_PM3386_0_SIZE 0x00100000 - -#define ENP2611_PM3386_1_PHYS_BASE 0xc6400000 -#define ENP2611_PM3386_1_VIRT_BASE 0xfe200000 -#define ENP2611_PM3386_1_SIZE 0x00100000 - -#define ENP2611_GPIO_SCL 7 -#define ENP2611_GPIO_SDA 6 - -#define IRQ_ENP2611_THERMAL IRQ_IXP2000_GPIO4 -#define IRQ_ENP2611_OPTION_BOARD IRQ_IXP2000_GPIO3 -#define IRQ_ENP2611_CALEB IRQ_IXP2000_GPIO2 -#define IRQ_ENP2611_PM3386_1 IRQ_IXP2000_GPIO1 -#define IRQ_ENP2611_PM3386_0 IRQ_IXP2000_GPIO0 - - -#endif diff --git a/arch/arm/mach-ixp2000/include/mach/entry-macro.S b/arch/arm/mach-ixp2000/include/mach/entry-macro.S deleted file mode 100644 index c4444dff9202..000000000000 --- a/arch/arm/mach-ixp2000/include/mach/entry-macro.S +++ /dev/null @@ -1,54 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for IXP2000-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <mach/irqs.h> - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - mov \irqnr, #0x0 @clear out irqnr as default - mov \base, #0xfe000000 - orr \base, \base, #0x00e00000 - orr \base, \base, #0x08 - ldr \irqstat, [\base] @ get interrupts - - cmp \irqstat, #0 - beq 1001f - - clz \irqnr, \irqstat - mov \base, #31 - subs \irqnr, \base, \irqnr - - /* - * We handle PCIA and PCIB here so we don't have an - * extra layer of code just to check these two bits. - */ - cmp \irqnr, #IRQ_IXP2000_PCI - bne 1001f - - mov \base, #0xfe000000 - orr \base, \base, #0x00c00000 - orr \base, \base, #0x00000100 - orr \base, \base, #0x00000058 - ldr \irqstat, [\base] - - mov \tmp, #(1<<26) - tst \irqstat, \tmp - movne \irqnr, #IRQ_IXP2000_PCIA - bne 1001f - - mov \tmp, #(1<<27) - tst \irqstat, \tmp - movne \irqnr, #IRQ_IXP2000_PCIB - -1001: - .endm - diff --git a/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h b/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h deleted file mode 100644 index af836c76c3f1..000000000000 --- a/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/gpio.h - * - * Copyright (C) 2002 Intel Corporation. - * - * This program is free software, you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* - * IXP2000 GPIO in/out, edge/level detection for IRQs: - * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High - * or both Falling-edge and Rising-edge. - * This must be called *before* the corresponding IRQ is registerd. - * Use this instead of directly setting the GPIO registers. - * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb) - */ -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -#ifndef __ASSEMBLY__ - -#define GPIO_IN 0 -#define GPIO_OUT 1 - -#define IXP2000_GPIO_LOW 0 -#define IXP2000_GPIO_HIGH 1 - -extern void gpio_line_config(int line, int direction); - -static inline int gpio_line_get(int line) -{ - return (((*IXP2000_GPIO_PLR) >> line) & 1); -} - -static inline void gpio_line_set(int line, int value) -{ - if (value == IXP2000_GPIO_HIGH) { - ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line); - } else if (value == IXP2000_GPIO_LOW) { - ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line); - } -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* ASM_ARCH_IXP2000_GPIO_H_ */ diff --git a/arch/arm/mach-ixp2000/include/mach/hardware.h b/arch/arm/mach-ixp2000/include/mach/hardware.h deleted file mode 100644 index cdaf1db84003..000000000000 --- a/arch/arm/mach-ixp2000/include/mach/hardware.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/hardware.h - * - * Hardware definitions for IXP2400/2800 based systems - * - * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com> - * - * Maintainer: Deepak Saxena <dsaxena@mvista.com> - * - * Copyright (C) 2001-2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#define __ASM_ARCH_HARDWARE_H__ - -#include "ixp2000-regs.h" /* Chipset Registers */ - -/* - * Platform helper functions - */ -#include "platform.h" - -/* - * Platform-specific bits - */ -#include "enp2611.h" /* ENP-2611 */ -#include "ixdp2x00.h" /* IXDP2400/2800 */ -#include "ixdp2x01.h" /* IXDP2401/2801 */ - -#endif /* _ASM_ARCH_HARDWARE_H__ */ diff --git a/arch/arm/mach-ixp2000/include/mach/io.h b/arch/arm/mach-ixp2000/include/mach/io.h deleted file mode 100644 index f6552d6f35ab..000000000000 --- a/arch/arm/mach-ixp2000/include/mach/io.h +++ /dev/null @@ -1,133 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/io.h - * - * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002 Intel Corp. - * Copyrgiht (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include <mach/hardware.h> - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * The A? revisions of the IXP2000s assert byte lanes for PCI I/O - * transactions the other way round (MEM transactions don't have this - * issue), so if we want to support those models, we need to override - * the standard I/O functions. - * - * B0 and later have a bit that can be set to 1 to get the proper - * behavior for I/O transactions, which then allows us to use the - * standard I/O functions. This is what we do if the user does not - * explicitly ask for support for pre-B0. - */ -#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO -#define ___io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE)) - -#define alignb(addr) (void __iomem *)((unsigned long)(addr) ^ 3) -#define alignw(addr) (void __iomem *)((unsigned long)(addr) ^ 2) - -#define outb(v,p) __raw_writeb((v),alignb(___io(p))) -#define outw(v,p) __raw_writew((v),alignw(___io(p))) -#define outl(v,p) __raw_writel((v),___io(p)) - -#define inb(p) ({ unsigned int __v = __raw_readb(alignb(___io(p))); __v; }) -#define inw(p) \ - ({ unsigned int __v = (__raw_readw(alignw(___io(p)))); __v; }) -#define inl(p) \ - ({ unsigned int __v = (__raw_readl(___io(p))); __v; }) - -#define outsb(p,d,l) __raw_writesb(alignb(___io(p)),d,l) -#define outsw(p,d,l) __raw_writesw(alignw(___io(p)),d,l) -#define outsl(p,d,l) __raw_writesl(___io(p),d,l) - -#define insb(p,d,l) __raw_readsb(alignb(___io(p)),d,l) -#define insw(p,d,l) __raw_readsw(alignw(___io(p)),d,l) -#define insl(p,d,l) __raw_readsl(___io(p),d,l) - -#define __is_io_address(p) ((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE) - -#define ioread8(p) \ - ({ \ - unsigned int __v; \ - \ - if (__is_io_address(p)) { \ - __v = __raw_readb(alignb(p)); \ - } else { \ - __v = __raw_readb(p); \ - } \ - \ - __v; \ - }) \ - -#define ioread16(p) \ - ({ \ - unsigned int __v; \ - \ - if (__is_io_address(p)) { \ - __v = __raw_readw(alignw(p)); \ - } else { \ - __v = le16_to_cpu(__raw_readw(p)); \ - } \ - \ - __v; \ - }) - -#define ioread32(p) \ - ({ \ - unsigned int __v; \ - \ - if (__is_io_address(p)) { \ - __v = __raw_readl(p); \ - } else { \ - __v = le32_to_cpu(__raw_readl(p)); \ - } \ - \ - __v; \ - }) - -#define iowrite8(v,p) \ - ({ \ - if (__is_io_address(p)) { \ - __raw_writeb((v), alignb(p)); \ - } else { \ - __raw_writeb((v), p); \ - } \ - }) - -#define iowrite16(v,p) \ - ({ \ - if (__is_io_address(p)) { \ - __raw_writew((v), alignw(p)); \ - } else { \ - __raw_writew(cpu_to_le16(v), p); \ - } \ - }) - -#define iowrite32(v,p) \ - ({ \ - if (__is_io_address(p)) { \ - __raw_writel((v), p); \ - } else { \ - __raw_writel(cpu_to_le32(v), p); \ - } \ - }) - -#define ioport_map(port, nr) ___io(port) - -#define ioport_unmap(addr) -#else -#define __io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE)) -#endif - - -#endif diff --git a/arch/arm/mach-ixp2000/include/mach/irqs.h b/arch/arm/mach-ixp2000/include/mach/irqs.h deleted file mode 100644 index bee96bcafdca..000000000000 --- a/arch/arm/mach-ixp2000/include/mach/irqs.h +++ /dev/null @@ -1,207 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/irqs.h - * - * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _IRQS_H -#define _IRQS_H - -/* - * Do NOT add #ifdef MACHINE_FOO in here. - * Simpy add your machine IRQs here and increase NR_IRQS if needed to - * hold your machine's IRQ table. - */ - -/* - * Some interrupt numbers go unused b/c the IRQ mask/ummask/status - * register has those bit reserved. We just mark those interrupts - * as invalid and this allows us to do mask/unmask with a single - * shift operation instead of having to map the IRQ number to - * a HW IRQ number. - */ -#define IRQ_IXP2000_SOFT_INT 0 /* soft interrupt */ -#define IRQ_IXP2000_ERRSUM 1 /* OR of all bits in ErrorStatus reg*/ -#define IRQ_IXP2000_UART 2 -#define IRQ_IXP2000_GPIO 3 -#define IRQ_IXP2000_TIMER1 4 -#define IRQ_IXP2000_TIMER2 5 -#define IRQ_IXP2000_TIMER3 6 -#define IRQ_IXP2000_TIMER4 7 -#define IRQ_IXP2000_PMU 8 -#define IRQ_IXP2000_SPF 9 /* Slow port framer IRQ */ -#define IRQ_IXP2000_DMA1 10 -#define IRQ_IXP2000_DMA2 11 -#define IRQ_IXP2000_DMA3 12 -#define IRQ_IXP2000_PCI_DOORBELL 13 -#define IRQ_IXP2000_ME_ATTN 14 -#define IRQ_IXP2000_PCI 15 /* PCI INTA or INTB */ -#define IRQ_IXP2000_THDA0 16 /* thread 0-31A */ -#define IRQ_IXP2000_THDA1 17 /* thread 32-63A, IXP2800 only */ -#define IRQ_IXP2000_THDA2 18 /* thread 64-95A */ -#define IRQ_IXP2000_THDA3 19 /* thread 96-127A, IXP2800 only */ -#define IRQ_IXP2000_THDB0 24 /* thread 0-31B */ -#define IRQ_IXP2000_THDB1 25 /* thread 32-63B, IXP2800 only */ -#define IRQ_IXP2000_THDB2 26 /* thread 64-95B */ -#define IRQ_IXP2000_THDB3 27 /* thread 96-127B, IXP2800 only */ - -/* define generic GPIOs */ -#define IRQ_IXP2000_GPIO0 32 -#define IRQ_IXP2000_GPIO1 33 -#define IRQ_IXP2000_GPIO2 34 -#define IRQ_IXP2000_GPIO3 35 -#define IRQ_IXP2000_GPIO4 36 -#define IRQ_IXP2000_GPIO5 37 -#define IRQ_IXP2000_GPIO6 38 -#define IRQ_IXP2000_GPIO7 39 - -/* split off the 2 PCI sources */ -#define IRQ_IXP2000_PCIA 40 -#define IRQ_IXP2000_PCIB 41 - -/* Int sources from IRQ_ERROR_STATUS */ -#define IRQ_IXP2000_DRAM0_MIN_ERR 42 -#define IRQ_IXP2000_DRAM0_MAJ_ERR 43 -#define IRQ_IXP2000_DRAM1_MIN_ERR 44 -#define IRQ_IXP2000_DRAM1_MAJ_ERR 45 -#define IRQ_IXP2000_DRAM2_MIN_ERR 46 -#define IRQ_IXP2000_DRAM2_MAJ_ERR 47 -/* 48-57 reserved */ -#define IRQ_IXP2000_SRAM0_ERR 58 -#define IRQ_IXP2000_SRAM1_ERR 59 -#define IRQ_IXP2000_SRAM2_ERR 60 -#define IRQ_IXP2000_SRAM3_ERR 61 -/* 62-65 reserved */ -#define IRQ_IXP2000_MEDIA_ERR 66 -#define IRQ_IXP2000_PCI_ERR 67 -#define IRQ_IXP2000_SP_INT 68 - -#define NR_IXP2000_IRQS 69 - -#define IXP2000_BOARD_IRQ(x) (NR_IXP2000_IRQS + (x)) - -#define IXP2000_BOARD_IRQ_MASK(irq) (1 << (irq - NR_IXP2000_IRQS)) - -#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) -#define IXP2000_VALID_ERR_IRQ_MASK (\ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT) ) - -/* - * This allows for all the on-chip sources plus up to 32 CPLD based - * IRQs. Should be more than enough. - */ -#define IXP2000_BOARD_IRQS 32 -#define NR_IRQS (NR_IXP2000_IRQS + IXP2000_BOARD_IRQS) - - -/* - * IXDP2400 specific IRQs - */ -#define IRQ_IXDP2400_INGRESS_NPU IXP2000_BOARD_IRQ(0) -#define IRQ_IXDP2400_ENET IXP2000_BOARD_IRQ(1) -#define IRQ_IXDP2400_MEDIA_PCI IXP2000_BOARD_IRQ(2) -#define IRQ_IXDP2400_MEDIA_SP IXP2000_BOARD_IRQ(3) -#define IRQ_IXDP2400_SF_PCI IXP2000_BOARD_IRQ(4) -#define IRQ_IXDP2400_SF_SP IXP2000_BOARD_IRQ(5) -#define IRQ_IXDP2400_PMC IXP2000_BOARD_IRQ(6) -#define IRQ_IXDP2400_TVM IXP2000_BOARD_IRQ(7) - -#define NR_IXDP2400_IRQS ((IRQ_IXDP2400_TVM)+1) -#define IXDP2400_NR_IRQS NR_IXDP2400_IRQS - NR_IXP2000_IRQS - -/* IXDP2800 specific IRQs */ -#define IRQ_IXDP2800_EGRESS_ENET IXP2000_BOARD_IRQ(0) -#define IRQ_IXDP2800_INGRESS_NPU IXP2000_BOARD_IRQ(1) -#define IRQ_IXDP2800_PMC IXP2000_BOARD_IRQ(2) -#define IRQ_IXDP2800_FABRIC_PCI IXP2000_BOARD_IRQ(3) -#define IRQ_IXDP2800_FABRIC IXP2000_BOARD_IRQ(4) -#define IRQ_IXDP2800_MEDIA IXP2000_BOARD_IRQ(5) - -#define NR_IXDP2800_IRQS ((IRQ_IXDP2800_MEDIA)+1) -#define IXDP2800_NR_IRQS NR_IXDP2800_IRQS - NR_IXP2000_IRQS - -/* - * IRQs on both IXDP2x01 boards - */ -#define IRQ_IXDP2X01_SPCI_DB_0 IXP2000_BOARD_IRQ(2) -#define IRQ_IXDP2X01_SPCI_DB_1 IXP2000_BOARD_IRQ(3) -#define IRQ_IXDP2X01_SPCI_PMC_INTA IXP2000_BOARD_IRQ(4) -#define IRQ_IXDP2X01_SPCI_PMC_INTB IXP2000_BOARD_IRQ(5) -#define IRQ_IXDP2X01_SPCI_PMC_INTC IXP2000_BOARD_IRQ(6) -#define IRQ_IXDP2X01_SPCI_PMC_INTD IXP2000_BOARD_IRQ(7) -#define IRQ_IXDP2X01_SPCI_FIC_INT IXP2000_BOARD_IRQ(8) -#define IRQ_IXDP2X01_IPMI_FROM IXP2000_BOARD_IRQ(16) -#define IRQ_IXDP2X01_125US IXP2000_BOARD_IRQ(17) -#define IRQ_IXDP2X01_DB_0_ADD IXP2000_BOARD_IRQ(18) -#define IRQ_IXDP2X01_DB_1_ADD IXP2000_BOARD_IRQ(19) -#define IRQ_IXDP2X01_UART1 IXP2000_BOARD_IRQ(21) -#define IRQ_IXDP2X01_UART2 IXP2000_BOARD_IRQ(22) -#define IRQ_IXDP2X01_FIC_ADD_INT IXP2000_BOARD_IRQ(24) -#define IRQ_IXDP2X01_CS8900 IXP2000_BOARD_IRQ(25) -#define IRQ_IXDP2X01_BBSRAM IXP2000_BOARD_IRQ(26) - -#define IXDP2X01_VALID_IRQ_MASK ( \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_0) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_1) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTA) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTB) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTC) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTD) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_FIC_INT) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_IPMI_FROM) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_125US) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_0_ADD) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_1_ADD) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART1) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART2) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_FIC_ADD_INT) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_CS8900) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_BBSRAM) ) - -/* - * IXDP2401 specific IRQs - */ -#define IRQ_IXDP2401_INTA_82546 IXP2000_BOARD_IRQ(0) -#define IRQ_IXDP2401_INTB_82546 IXP2000_BOARD_IRQ(1) - -#define IXDP2401_VALID_IRQ_MASK ( \ - IXDP2X01_VALID_IRQ_MASK | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTA_82546) |\ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTB_82546)) - -/* - * IXDP2801-specific IRQs - */ -#define IRQ_IXDP2801_RIV IXP2000_BOARD_IRQ(0) -#define IRQ_IXDP2801_CNFG_MEDIA IXP2000_BOARD_IRQ(27) -#define IRQ_IXDP2801_CLOCK_REF IXP2000_BOARD_IRQ(28) - -#define IXDP2801_VALID_IRQ_MASK ( \ - IXDP2X01_VALID_IRQ_MASK | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_RIV) |\ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CNFG_MEDIA) |\ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CLOCK_REF)) - -#define NR_IXDP2X01_IRQS ((IRQ_IXDP2801_CLOCK_REF) + 1) - -#endif /*_IRQS_H*/ diff --git a/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h b/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h deleted file mode 100644 index 5df8479d9481..000000000000 --- a/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/ixdp2x00.h - * - * Register and other defines for IXDP2[48]00 platforms - * - * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _IXDP2X00_H_ -#define _IXDP2X00_H_ - -/* - * On board CPLD memory map - */ -#define IXDP2X00_PHYS_CPLD_BASE 0xc7000000 -#define IXDP2X00_VIRT_CPLD_BASE 0xfe000000 -#define IXDP2X00_CPLD_SIZE 0x00100000 - - -#define IXDP2X00_CPLD_REG(x) \ - (volatile unsigned long *)(IXDP2X00_VIRT_CPLD_BASE | x) - -/* - * IXDP2400 CPLD registers - */ -#define IXDP2400_CPLD_SYSLED IXDP2X00_CPLD_REG(0x0) -#define IXDP2400_CPLD_DISP_DATA IXDP2X00_CPLD_REG(0x4) -#define IXDP2400_CPLD_CLOCK_SPEED IXDP2X00_CPLD_REG(0x8) -#define IXDP2400_CPLD_INT_STAT IXDP2X00_CPLD_REG(0xc) -#define IXDP2400_CPLD_REV IXDP2X00_CPLD_REG(0x10) -#define IXDP2400_CPLD_SYS_CLK_M IXDP2X00_CPLD_REG(0x14) -#define IXDP2400_CPLD_SYS_CLK_N IXDP2X00_CPLD_REG(0x18) -#define IXDP2400_CPLD_INT_MASK IXDP2X00_CPLD_REG(0x48) - -/* - * IXDP2800 CPLD registers - */ -#define IXDP2800_CPLD_INT_STAT IXDP2X00_CPLD_REG(0x0) -#define IXDP2800_CPLD_INT_MASK IXDP2X00_CPLD_REG(0x140) - - -#define IXDP2X00_GPIO_I2C_ENABLE 0x02 -#define IXDP2X00_GPIO_SCL 0x07 -#define IXDP2X00_GPIO_SDA 0x06 - -/* - * PCI devfns for on-board devices. We need these to be able to - * properly translate IRQs and for device removal. - */ -#define IXDP2400_SLAVE_ENET_DEVFN 0x18 /* Bus 1 */ -#define IXDP2400_MASTER_ENET_DEVFN 0x20 /* Bus 1 */ -#define IXDP2400_MEDIA_DEVFN 0x28 /* Bus 1 */ -#define IXDP2400_SWITCH_FABRIC_DEVFN 0x30 /* Bus 1 */ - -#define IXDP2800_SLAVE_ENET_DEVFN 0x20 /* Bus 1 */ -#define IXDP2800_MASTER_ENET_DEVFN 0x18 /* Bus 1 */ -#define IXDP2800_SWITCH_FABRIC_DEVFN 0x30 /* Bus 1 */ - -#define IXDP2X00_P2P_DEVFN 0x20 /* Bus 0 */ -#define IXDP2X00_21555_DEVFN 0x30 /* Bus 0 */ -#define IXDP2X00_SLAVE_NPU_DEVFN 0x28 /* Bus 1 */ -#define IXDP2X00_PMC_DEVFN 0x38 /* Bus 1 */ -#define IXDP2X00_MASTER_NPU_DEVFN 0x38 /* Bus 1 */ - -#ifndef __ASSEMBLY__ -/* - * The master NPU is always PCI master. - */ -static inline unsigned int ixdp2x00_master_npu(void) -{ - return !!ixp2000_is_pcimaster(); -} - -/* - * Helper functions used by ixdp2400 and ixdp2800 specific code - */ -void ixdp2x00_init_irq(volatile unsigned long*, volatile unsigned long *, unsigned long); -void ixdp2x00_slave_pci_postinit(void); -void ixdp2x00_init_machine(void); -void ixdp2x00_map_io(void); - -#endif - -#endif /*_IXDP2X00_H_ */ diff --git a/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h b/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h deleted file mode 100644 index 4c1f04083e54..000000000000 --- a/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/ixdp2x01.h - * - * Platform definitions for IXDP2X01 && IXDP2801 systems - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2004 (c) MontaVista Software, Inc. - * - * Based on original code Copyright (c) 2002-2003 Intel Corporation - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __IXDP2X01_H__ -#define __IXDP2X01_H__ - -#define IXDP2X01_PHYS_CPLD_BASE 0xc6024000 -#define IXDP2X01_VIRT_CPLD_BASE 0xfe000000 -#define IXDP2X01_CPLD_REGION_SIZE 0x00100000 - -#define IXDP2X01_CPLD_VIRT_REG(reg) (volatile unsigned long*)(IXDP2X01_VIRT_CPLD_BASE | reg) -#define IXDP2X01_CPLD_PHYS_REG(reg) (IXDP2X01_PHYS_CPLD_BASE | reg) - -#define IXDP2X01_UART1_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x40) -#define IXDP2X01_UART1_PHYS_BASE IXDP2X01_CPLD_PHYS_REG(0x40) - -#define IXDP2X01_UART2_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x60) -#define IXDP2X01_UART2_PHYS_BASE IXDP2X01_CPLD_PHYS_REG(0x60) - -#define IXDP2X01_CS8900_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x80) -#define IXDP2X01_CS8900_VIRT_END (IXDP2X01_CS8900_VIRT_BASE + 16) - -#define IXDP2X01_CPLD_RESET_REG IXDP2X01_CPLD_VIRT_REG(0x00) -#define IXDP2X01_INT_MASK_SET_REG IXDP2X01_CPLD_VIRT_REG(0x08) -#define IXDP2X01_INT_STAT_REG IXDP2X01_CPLD_VIRT_REG(0x0C) -#define IXDP2X01_INT_RAW_REG IXDP2X01_CPLD_VIRT_REG(0x10) -#define IXDP2X01_INT_MASK_CLR_REG IXDP2X01_INT_RAW_REG -#define IXDP2X01_INT_SIM_REG IXDP2X01_CPLD_VIRT_REG(0x14) - -#define IXDP2X01_CPLD_FLASH_REG IXDP2X01_CPLD_VIRT_REG(0x20) - -#define IXDP2X01_CPLD_FLASH_INTERN 0x8000 -#define IXDP2X01_CPLD_FLASH_BANK_MASK 0xF -#define IXDP2X01_FLASH_WINDOW_BITS 25 -#define IXDP2X01_FLASH_WINDOW_SIZE (1 << IXDP2X01_FLASH_WINDOW_BITS) -#define IXDP2X01_FLASH_WINDOW_MASK (IXDP2X01_FLASH_WINDOW_SIZE - 1) - -#define IXDP2X01_UART_CLK 1843200 - -#define IXDP2X01_GPIO_I2C_ENABLE 0x02 -#define IXDP2X01_GPIO_SCL 0x07 -#define IXDP2X01_GPIO_SDA 0x06 - -#endif /* __IXDP2x01_H__ */ diff --git a/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h deleted file mode 100644 index 822f63f2f4a2..000000000000 --- a/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h +++ /dev/null @@ -1,451 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h - * - * Chipset register definitions for IXP2400/2800 based systems. - * - * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> - * - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _IXP2000_REGS_H_ -#define _IXP2000_REGS_H_ - -/* - * IXP2000 linux memory map: - * - * virt phys size - * fb000000 db000000 16M PCI CFG1 - * fc000000 da000000 16M PCI CFG0 - * fd000000 d8000000 16M PCI I/O - * fe[0-7]00000 8M per-platform mappings - * fe900000 80000000 1M SRAM #0 (first MB) - * fea00000 cb400000 1M SCRATCH ring get/put - * feb00000 c8000000 1M MSF - * fec00000 df000000 1M PCI CSRs - * fed00000 de000000 1M PCI CREG - * fee00000 d6000000 1M INTCTL - * fef00000 c0000000 1M CAP - */ - -/* - * Static I/O regions. - * - * Most of the registers are clumped in 4K regions spread throughout - * the 0xc0000000 -> 0xc0100000 address range, but we just map in - * the whole range using a single 1 MB section instead of small - * 4K pages. - * - * CAP stands for CSR Access Proxy. - * - * If you change the virtual address of this mapping, please propagate - * the change to arch/arm/kernel/debug.S, which hardcodes the virtual - * address of the UART located in this region. - */ - -#define IXP2000_CAP_PHYS_BASE 0xc0000000 -#define IXP2000_CAP_VIRT_BASE 0xfef00000 -#define IXP2000_CAP_SIZE 0x00100000 - -/* - * Addresses for specific on-chip peripherals. - */ -#define IXP2000_SLOWPORT_CSR_VIRT_BASE 0xfef80000 -#define IXP2000_GLOBAL_REG_VIRT_BASE 0xfef04000 -#define IXP2000_UART_PHYS_BASE 0xc0030000 -#define IXP2000_UART_VIRT_BASE 0xfef30000 -#define IXP2000_TIMER_VIRT_BASE 0xfef20000 -#define IXP2000_UENGINE_CSR_VIRT_BASE 0xfef18000 -#define IXP2000_GPIO_VIRT_BASE 0xfef10000 - -/* - * Devices outside of the 0xc0000000 -> 0xc0100000 range. The virtual - * addresses of the INTCTL and PCI_CSR mappings are hardcoded in - * entry-macro.S, so if you ever change these please propagate - * the change. - */ -#define IXP2000_INTCTL_PHYS_BASE 0xd6000000 -#define IXP2000_INTCTL_VIRT_BASE 0xfee00000 -#define IXP2000_INTCTL_SIZE 0x00100000 - -#define IXP2000_PCI_CREG_PHYS_BASE 0xde000000 -#define IXP2000_PCI_CREG_VIRT_BASE 0xfed00000 -#define IXP2000_PCI_CREG_SIZE 0x00100000 - -#define IXP2000_PCI_CSR_PHYS_BASE 0xdf000000 -#define IXP2000_PCI_CSR_VIRT_BASE 0xfec00000 -#define IXP2000_PCI_CSR_SIZE 0x00100000 - -#define IXP2000_MSF_PHYS_BASE 0xc8000000 -#define IXP2000_MSF_VIRT_BASE 0xfeb00000 -#define IXP2000_MSF_SIZE 0x00100000 - -#define IXP2000_SCRATCH_RING_PHYS_BASE 0xcb400000 -#define IXP2000_SCRATCH_RING_VIRT_BASE 0xfea00000 -#define IXP2000_SCRATCH_RING_SIZE 0x00100000 - -#define IXP2000_SRAM0_PHYS_BASE 0x80000000 -#define IXP2000_SRAM0_VIRT_BASE 0xfe900000 -#define IXP2000_SRAM0_SIZE 0x00100000 - -#define IXP2000_PCI_IO_PHYS_BASE 0xd8000000 -#define IXP2000_PCI_IO_VIRT_BASE 0xfd000000 -#define IXP2000_PCI_IO_SIZE 0x01000000 - -#define IXP2000_PCI_CFG0_PHYS_BASE 0xda000000 -#define IXP2000_PCI_CFG0_VIRT_BASE 0xfc000000 -#define IXP2000_PCI_CFG0_SIZE 0x01000000 - -#define IXP2000_PCI_CFG1_PHYS_BASE 0xdb000000 -#define IXP2000_PCI_CFG1_VIRT_BASE 0xfb000000 -#define IXP2000_PCI_CFG1_SIZE 0x01000000 - -/* - * Timers - */ -#define IXP2000_TIMER_REG(x) ((volatile unsigned long*)(IXP2000_TIMER_VIRT_BASE | (x))) -/* Timer control */ -#define IXP2000_T1_CTL IXP2000_TIMER_REG(0x00) -#define IXP2000_T2_CTL IXP2000_TIMER_REG(0x04) -#define IXP2000_T3_CTL IXP2000_TIMER_REG(0x08) -#define IXP2000_T4_CTL IXP2000_TIMER_REG(0x0c) -/* Store initial value */ -#define IXP2000_T1_CLD IXP2000_TIMER_REG(0x10) -#define IXP2000_T2_CLD IXP2000_TIMER_REG(0x14) -#define IXP2000_T3_CLD IXP2000_TIMER_REG(0x18) -#define IXP2000_T4_CLD IXP2000_TIMER_REG(0x1c) -/* Read current value */ -#define IXP2000_T1_CSR IXP2000_TIMER_REG(0x20) -#define IXP2000_T2_CSR IXP2000_TIMER_REG(0x24) -#define IXP2000_T3_CSR IXP2000_TIMER_REG(0x28) -#define IXP2000_T4_CSR IXP2000_TIMER_REG(0x2c) -/* Clear associated timer interrupt */ -#define IXP2000_T1_CLR IXP2000_TIMER_REG(0x30) -#define IXP2000_T2_CLR IXP2000_TIMER_REG(0x34) -#define IXP2000_T3_CLR IXP2000_TIMER_REG(0x38) -#define IXP2000_T4_CLR IXP2000_TIMER_REG(0x3c) -/* Timer watchdog enable for T4 */ -#define IXP2000_TWDE IXP2000_TIMER_REG(0x40) - -#define WDT_ENABLE 0x00000001 -#define TIMER_DIVIDER_256 0x00000008 -#define TIMER_ENABLE 0x00000080 -#define IRQ_MASK_TIMER1 (1 << 4) - -/* - * Interrupt controller registers - */ -#define IXP2000_INTCTL_REG(x) (volatile unsigned long*)(IXP2000_INTCTL_VIRT_BASE | (x)) -#define IXP2000_IRQ_STATUS IXP2000_INTCTL_REG(0x08) -#define IXP2000_IRQ_ENABLE IXP2000_INTCTL_REG(0x10) -#define IXP2000_IRQ_ENABLE_SET IXP2000_INTCTL_REG(0x10) -#define IXP2000_IRQ_ENABLE_CLR IXP2000_INTCTL_REG(0x18) -#define IXP2000_FIQ_ENABLE_CLR IXP2000_INTCTL_REG(0x14) -#define IXP2000_IRQ_ERR_STATUS IXP2000_INTCTL_REG(0x24) -#define IXP2000_IRQ_ERR_ENABLE_SET IXP2000_INTCTL_REG(0x2c) -#define IXP2000_FIQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x30) -#define IXP2000_IRQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x34) -#define IXP2000_IRQ_THD_RAW_STATUS_A_0 IXP2000_INTCTL_REG(0x60) -#define IXP2000_IRQ_THD_RAW_STATUS_A_1 IXP2000_INTCTL_REG(0x64) -#define IXP2000_IRQ_THD_RAW_STATUS_A_2 IXP2000_INTCTL_REG(0x68) -#define IXP2000_IRQ_THD_RAW_STATUS_A_3 IXP2000_INTCTL_REG(0x6c) -#define IXP2000_IRQ_THD_RAW_STATUS_B_0 IXP2000_INTCTL_REG(0x80) -#define IXP2000_IRQ_THD_RAW_STATUS_B_1 IXP2000_INTCTL_REG(0x84) -#define IXP2000_IRQ_THD_RAW_STATUS_B_2 IXP2000_INTCTL_REG(0x88) -#define IXP2000_IRQ_THD_RAW_STATUS_B_3 IXP2000_INTCTL_REG(0x8c) -#define IXP2000_IRQ_THD_STATUS_A_0 IXP2000_INTCTL_REG(0xe0) -#define IXP2000_IRQ_THD_STATUS_A_1 IXP2000_INTCTL_REG(0xe4) -#define IXP2000_IRQ_THD_STATUS_A_2 IXP2000_INTCTL_REG(0xe8) -#define IXP2000_IRQ_THD_STATUS_A_3 IXP2000_INTCTL_REG(0xec) -#define IXP2000_IRQ_THD_STATUS_B_0 IXP2000_INTCTL_REG(0x100) -#define IXP2000_IRQ_THD_STATUS_B_1 IXP2000_INTCTL_REG(0x104) -#define IXP2000_IRQ_THD_STATUS_B_2 IXP2000_INTCTL_REG(0x108) -#define IXP2000_IRQ_THD_STATUS_B_3 IXP2000_INTCTL_REG(0x10c) -#define IXP2000_IRQ_THD_ENABLE_SET_A_0 IXP2000_INTCTL_REG(0x160) -#define IXP2000_IRQ_THD_ENABLE_SET_A_1 IXP2000_INTCTL_REG(0x164) -#define IXP2000_IRQ_THD_ENABLE_SET_A_2 IXP2000_INTCTL_REG(0x168) -#define IXP2000_IRQ_THD_ENABLE_SET_A_3 IXP2000_INTCTL_REG(0x16c) -#define IXP2000_IRQ_THD_ENABLE_SET_B_0 IXP2000_INTCTL_REG(0x180) -#define IXP2000_IRQ_THD_ENABLE_SET_B_1 IXP2000_INTCTL_REG(0x184) -#define IXP2000_IRQ_THD_ENABLE_SET_B_2 IXP2000_INTCTL_REG(0x188) -#define IXP2000_IRQ_THD_ENABLE_SET_B_3 IXP2000_INTCTL_REG(0x18c) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_0 IXP2000_INTCTL_REG(0x1e0) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_1 IXP2000_INTCTL_REG(0x1e4) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_2 IXP2000_INTCTL_REG(0x1e8) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_3 IXP2000_INTCTL_REG(0x1ec) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_0 IXP2000_INTCTL_REG(0x200) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_1 IXP2000_INTCTL_REG(0x204) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_2 IXP2000_INTCTL_REG(0x208) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_3 IXP2000_INTCTL_REG(0x20c) - -/* - * Mask of valid IRQs in the 32-bit IRQ register. We use - * this to mark certain IRQs as being invalid. - */ -#define IXP2000_VALID_IRQ_MASK 0x0f0fffff - -/* - * PCI config register access from core - */ -#define IXP2000_PCI_CREG(x) (volatile unsigned long*)(IXP2000_PCI_CREG_VIRT_BASE | (x)) -#define IXP2000_PCI_CMDSTAT IXP2000_PCI_CREG(0x04) -#define IXP2000_PCI_CSR_BAR IXP2000_PCI_CREG(0x10) -#define IXP2000_PCI_SRAM_BAR IXP2000_PCI_CREG(0x14) -#define IXP2000_PCI_SDRAM_BAR IXP2000_PCI_CREG(0x18) - -/* - * PCI CSRs - */ -#define IXP2000_PCI_CSR(x) (volatile unsigned long*)(IXP2000_PCI_CSR_VIRT_BASE | (x)) - -/* - * PCI outbound interrupts - */ -#define IXP2000_PCI_OUT_INT_STATUS IXP2000_PCI_CSR(0x30) -#define IXP2000_PCI_OUT_INT_MASK IXP2000_PCI_CSR(0x34) -/* - * PCI communications - */ -#define IXP2000_PCI_MAILBOX0 IXP2000_PCI_CSR(0x50) -#define IXP2000_PCI_MAILBOX1 IXP2000_PCI_CSR(0x54) -#define IXP2000_PCI_MAILBOX2 IXP2000_PCI_CSR(0x58) -#define IXP2000_PCI_MAILBOX3 IXP2000_PCI_CSR(0x5C) -#define IXP2000_XSCALE_DOORBELL IXP2000_PCI_CSR(0x60) -#define IXP2000_XSCALE_DOORBELL_SETUP IXP2000_PCI_CSR(0x64) -#define IXP2000_PCI_DOORBELL IXP2000_PCI_CSR(0x70) -#define IXP2000_PCI_DOORBELL_SETUP IXP2000_PCI_CSR(0x74) - -/* - * DMA engines - */ -#define IXP2000_PCI_CH1_BYTE_CNT IXP2000_PCI_CSR(0x80) -#define IXP2000_PCI_CH1_ADDR IXP2000_PCI_CSR(0x84) -#define IXP2000_PCI_CH1_DRAM_ADDR IXP2000_PCI_CSR(0x88) -#define IXP2000_PCI_CH1_DESC_PTR IXP2000_PCI_CSR(0x8C) -#define IXP2000_PCI_CH1_CNTRL IXP2000_PCI_CSR(0x90) -#define IXP2000_PCI_CH1_ME_PARAM IXP2000_PCI_CSR(0x94) -#define IXP2000_PCI_CH2_BYTE_CNT IXP2000_PCI_CSR(0xA0) -#define IXP2000_PCI_CH2_ADDR IXP2000_PCI_CSR(0xA4) -#define IXP2000_PCI_CH2_DRAM_ADDR IXP2000_PCI_CSR(0xA8) -#define IXP2000_PCI_CH2_DESC_PTR IXP2000_PCI_CSR(0xAC) -#define IXP2000_PCI_CH2_CNTRL IXP2000_PCI_CSR(0xB0) -#define IXP2000_PCI_CH2_ME_PARAM IXP2000_PCI_CSR(0xB4) -#define IXP2000_PCI_CH3_BYTE_CNT IXP2000_PCI_CSR(0xC0) -#define IXP2000_PCI_CH3_ADDR IXP2000_PCI_CSR(0xC4) -#define IXP2000_PCI_CH3_DRAM_ADDR IXP2000_PCI_CSR(0xC8) -#define IXP2000_PCI_CH3_DESC_PTR IXP2000_PCI_CSR(0xCC) -#define IXP2000_PCI_CH3_CNTRL IXP2000_PCI_CSR(0xD0) -#define IXP2000_PCI_CH3_ME_PARAM IXP2000_PCI_CSR(0xD4) -#define IXP2000_DMA_INF_MODE IXP2000_PCI_CSR(0xE0) -/* - * Size masks for BARs - */ -#define IXP2000_PCI_SRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0xFC) -#define IXP2000_PCI_DRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0x100) -/* - * Control and uEngine related - */ -#define IXP2000_PCI_CONTROL IXP2000_PCI_CSR(0x13C) -#define IXP2000_PCI_ADDR_EXT IXP2000_PCI_CSR(0x140) -#define IXP2000_PCI_ME_PUSH_STATUS IXP2000_PCI_CSR(0x148) -#define IXP2000_PCI_ME_PUSH_EN IXP2000_PCI_CSR(0x14C) -#define IXP2000_PCI_ERR_STATUS IXP2000_PCI_CSR(0x150) -#define IXP2000_PCI_ERR_ENABLE IXP2000_PCI_CSR(0x154) -/* - * Inbound PCI interrupt control - */ -#define IXP2000_PCI_XSCALE_INT_STATUS IXP2000_PCI_CSR(0x158) -#define IXP2000_PCI_XSCALE_INT_ENABLE IXP2000_PCI_CSR(0x15C) - -#define IXP2000_PCICNTL_PNR (1<<17) /* PCI not Reset bit of PCI_CONTROL */ -#define IXP2000_PCICNTL_PCF (1<<28) /* PCI Central function bit */ -#define IXP2000_XSCALE_INT (1<<1) /* Interrupt from XScale to PCI */ - -/* These are from the IRQ register in the PCI ISR register */ -#define PCI_CONTROL_BE_DEO (1 << 22) /* Big Endian Data Enable Out */ -#define PCI_CONTROL_BE_DEI (1 << 21) /* Big Endian Data Enable In */ -#define PCI_CONTROL_BE_BEO (1 << 20) /* Big Endian Byte Enable Out */ -#define PCI_CONTROL_BE_BEI (1 << 19) /* Big Endian Byte Enable In */ -#define PCI_CONTROL_IEE (1 << 17) /* I/O cycle Endian swap Enable */ - -#define IXP2000_PCI_RST_REL (1 << 2) -#define CFG_RST_DIR (*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF) -#define CFG_PCI_BOOT_HOST (1 << 2) -#define CFG_BOOT_PROM (1 << 1) - -/* - * SlowPort CSRs - * - * The slowport is used to access things like flash, SONET framer control - * ports, slave microprocessors, CPLDs, and others of chip memory mapped - * peripherals. - */ -#define SLOWPORT_CSR(x) (volatile unsigned long*)(IXP2000_SLOWPORT_CSR_VIRT_BASE | (x)) - -#define IXP2000_SLOWPORT_CCR SLOWPORT_CSR(0x00) -#define IXP2000_SLOWPORT_WTC1 SLOWPORT_CSR(0x04) -#define IXP2000_SLOWPORT_WTC2 SLOWPORT_CSR(0x08) -#define IXP2000_SLOWPORT_RTC1 SLOWPORT_CSR(0x0c) -#define IXP2000_SLOWPORT_RTC2 SLOWPORT_CSR(0x10) -#define IXP2000_SLOWPORT_FSR SLOWPORT_CSR(0x14) -#define IXP2000_SLOWPORT_PCR SLOWPORT_CSR(0x18) -#define IXP2000_SLOWPORT_ADC SLOWPORT_CSR(0x1C) -#define IXP2000_SLOWPORT_FAC SLOWPORT_CSR(0x20) -#define IXP2000_SLOWPORT_FRM SLOWPORT_CSR(0x24) -#define IXP2000_SLOWPORT_FIN SLOWPORT_CSR(0x28) - -/* - * CCR values. - * The CCR configures the clock division for the slowport interface. - */ -#define SLOWPORT_CCR_DIV_1 0x00 -#define SLOWPORT_CCR_DIV_2 0x01 -#define SLOWPORT_CCR_DIV_4 0x02 -#define SLOWPORT_CCR_DIV_6 0x03 -#define SLOWPORT_CCR_DIV_8 0x04 -#define SLOWPORT_CCR_DIV_10 0x05 -#define SLOWPORT_CCR_DIV_12 0x06 -#define SLOWPORT_CCR_DIV_14 0x07 -#define SLOWPORT_CCR_DIV_16 0x08 -#define SLOWPORT_CCR_DIV_18 0x09 -#define SLOWPORT_CCR_DIV_20 0x0a -#define SLOWPORT_CCR_DIV_22 0x0b -#define SLOWPORT_CCR_DIV_24 0x0c -#define SLOWPORT_CCR_DIV_26 0x0d -#define SLOWPORT_CCR_DIV_28 0x0e -#define SLOWPORT_CCR_DIV_30 0x0f - -/* - * PCR values. PCR configure the mode of the interface. - */ -#define SLOWPORT_MODE_FLASH 0x00 -#define SLOWPORT_MODE_LUCENT 0x01 -#define SLOWPORT_MODE_PMC_SIERRA 0x02 -#define SLOWPORT_MODE_INTEL_UP 0x03 -#define SLOWPORT_MODE_MOTOROLA_UP 0x04 - -/* - * ADC values. Defines data and address bus widths. - */ -#define SLOWPORT_ADDR_WIDTH_8 0x00 -#define SLOWPORT_ADDR_WIDTH_16 0x01 -#define SLOWPORT_ADDR_WIDTH_24 0x02 -#define SLOWPORT_ADDR_WIDTH_32 0x03 -#define SLOWPORT_DATA_WIDTH_8 0x00 -#define SLOWPORT_DATA_WIDTH_16 0x10 -#define SLOWPORT_DATA_WIDTH_24 0x20 -#define SLOWPORT_DATA_WIDTH_32 0x30 - -/* - * Masks and shifts for various fields in the WTC and RTC registers. - */ -#define SLOWPORT_WRTC_MASK_HD 0x0003 -#define SLOWPORT_WRTC_MASK_PW 0x003c -#define SLOWPORT_WRTC_MASK_SU 0x03c0 - -#define SLOWPORT_WRTC_SHIFT_HD 0x00 -#define SLOWPORT_WRTC_SHIFT_SU 0x02 -#define SLOWPORT_WRTC_SHFIT_PW 0x06 - - -/* - * GPIO registers & GPIO interface. - */ -#define IXP2000_GPIO_REG(x) ((volatile unsigned long*)(IXP2000_GPIO_VIRT_BASE+(x))) -#define IXP2000_GPIO_PLR IXP2000_GPIO_REG(0x00) -#define IXP2000_GPIO_PDPR IXP2000_GPIO_REG(0x04) -#define IXP2000_GPIO_PDSR IXP2000_GPIO_REG(0x08) -#define IXP2000_GPIO_PDCR IXP2000_GPIO_REG(0x0c) -#define IXP2000_GPIO_POPR IXP2000_GPIO_REG(0x10) -#define IXP2000_GPIO_POSR IXP2000_GPIO_REG(0x14) -#define IXP2000_GPIO_POCR IXP2000_GPIO_REG(0x18) -#define IXP2000_GPIO_REDR IXP2000_GPIO_REG(0x1c) -#define IXP2000_GPIO_FEDR IXP2000_GPIO_REG(0x20) -#define IXP2000_GPIO_EDSR IXP2000_GPIO_REG(0x24) -#define IXP2000_GPIO_LSHR IXP2000_GPIO_REG(0x28) -#define IXP2000_GPIO_LSLR IXP2000_GPIO_REG(0x2c) -#define IXP2000_GPIO_LDSR IXP2000_GPIO_REG(0x30) -#define IXP2000_GPIO_INER IXP2000_GPIO_REG(0x34) -#define IXP2000_GPIO_INSR IXP2000_GPIO_REG(0x38) -#define IXP2000_GPIO_INCR IXP2000_GPIO_REG(0x3c) -#define IXP2000_GPIO_INST IXP2000_GPIO_REG(0x40) - -/* - * "Global" registers...whatever that's supposed to mean. - */ -#define GLOBAL_REG_BASE (IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00) -#define GLOBAL_REG(x) (volatile unsigned long*)(GLOBAL_REG_BASE | (x)) - -#define IXP2000_MAJ_PROD_TYPE_MASK 0x001F0000 -#define IXP2000_MAJ_PROD_TYPE_IXP2000 0x00000000 -#define IXP2000_MIN_PROD_TYPE_MASK 0x0000FF00 -#define IXP2000_MIN_PROD_TYPE_IXP2400 0x00000200 -#define IXP2000_MIN_PROD_TYPE_IXP2850 0x00000100 -#define IXP2000_MIN_PROD_TYPE_IXP2800 0x00000000 -#define IXP2000_MAJ_REV_MASK 0x000000F0 -#define IXP2000_MIN_REV_MASK 0x0000000F -#define IXP2000_PROD_ID_MASK 0xFFFFFFFF - -#define IXP2000_PRODUCT_ID GLOBAL_REG(0x00) -#define IXP2000_MISC_CONTROL GLOBAL_REG(0x04) -#define IXP2000_MSF_CLK_CNTRL GLOBAL_REG(0x08) -#define IXP2000_RESET0 GLOBAL_REG(0x0c) -#define IXP2000_RESET1 GLOBAL_REG(0x10) -#define IXP2000_CCR GLOBAL_REG(0x14) -#define IXP2000_STRAP_OPTIONS GLOBAL_REG(0x18) - -#define RSTALL (1 << 16) -#define WDT_RESET_ENABLE 0x01000000 - - -/* - * MSF registers. The IXP2400 and IXP2800 have somewhat different MSF - * units, but the registers that differ between the two don't overlap, - * so we can have one register list for both. - */ -#define IXP2000_MSF_REG(x) ((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x))) -#define IXP2000_MSF_RX_CONTROL IXP2000_MSF_REG(0x0000) -#define IXP2000_MSF_TX_CONTROL IXP2000_MSF_REG(0x0004) -#define IXP2000_MSF_INTERRUPT_STATUS IXP2000_MSF_REG(0x0008) -#define IXP2000_MSF_INTERRUPT_ENABLE IXP2000_MSF_REG(0x000c) -#define IXP2000_MSF_CSIX_TYPE_MAP IXP2000_MSF_REG(0x0010) -#define IXP2000_MSF_FC_EGRESS_STATUS IXP2000_MSF_REG(0x0014) -#define IXP2000_MSF_FC_INGRESS_STATUS IXP2000_MSF_REG(0x0018) -#define IXP2000_MSF_HWM_CONTROL IXP2000_MSF_REG(0x0024) -#define IXP2000_MSF_FC_STATUS_OVERRIDE IXP2000_MSF_REG(0x0028) -#define IXP2000_MSF_CLOCK_CONTROL IXP2000_MSF_REG(0x002c) -#define IXP2000_MSF_RX_PORT_MAP IXP2000_MSF_REG(0x0040) -#define IXP2000_MSF_RBUF_ELEMENT_DONE IXP2000_MSF_REG(0x0044) -#define IXP2000_MSF_RX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0048) -#define IXP2000_MSF_RX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0048) -#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0 IXP2000_MSF_REG(0x0050) -#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1 IXP2000_MSF_REG(0x0054) -#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2 IXP2000_MSF_REG(0x0058) -#define IXP2000_MSF_TX_SEQUENCE_0 IXP2000_MSF_REG(0x0060) -#define IXP2000_MSF_TX_SEQUENCE_1 IXP2000_MSF_REG(0x0064) -#define IXP2000_MSF_TX_SEQUENCE_2 IXP2000_MSF_REG(0x0068) -#define IXP2000_MSF_TX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0070) -#define IXP2000_MSF_TX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0070) -#define IXP2000_MSF_RX_UP_CONTROL_0 IXP2000_MSF_REG(0x0080) -#define IXP2000_MSF_RX_UP_CONTROL_1 IXP2000_MSF_REG(0x0084) -#define IXP2000_MSF_RX_UP_CONTROL_2 IXP2000_MSF_REG(0x0088) -#define IXP2000_MSF_RX_UP_CONTROL_3 IXP2000_MSF_REG(0x008c) -#define IXP2000_MSF_TX_UP_CONTROL_0 IXP2000_MSF_REG(0x0090) -#define IXP2000_MSF_TX_UP_CONTROL_1 IXP2000_MSF_REG(0x0094) -#define IXP2000_MSF_TX_UP_CONTROL_2 IXP2000_MSF_REG(0x0098) -#define IXP2000_MSF_TX_UP_CONTROL_3 IXP2000_MSF_REG(0x009c) -#define IXP2000_MSF_TRAIN_DATA IXP2000_MSF_REG(0x00a0) -#define IXP2000_MSF_TRAIN_CALENDAR IXP2000_MSF_REG(0x00a4) -#define IXP2000_MSF_TRAIN_FLOW_CONTROL IXP2000_MSF_REG(0x00a8) -#define IXP2000_MSF_TX_CALENDAR_0 IXP2000_MSF_REG(0x1000) -#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS IXP2000_MSF_REG(0x1400) - - -#endif /* _IXP2000_H_ */ diff --git a/arch/arm/mach-ixp2000/include/mach/memory.h b/arch/arm/mach-ixp2000/include/mach/memory.h deleted file mode 100644 index 5f0c4fd4076a..000000000000 --- a/arch/arm/mach-ixp2000/include/mach/memory.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/memory.h - * - * Copyright (c) 2002 Intel Corp. - * Copyright (c) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#include <mach/ixp2000-regs.h> - -#define IXP2000_PCI_SDRAM_OFFSET (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0) - -#define __phys_to_bus(x) ((x) + (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET)) -#define __bus_to_phys(x) ((x) - (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET)) - -#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v)) -#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b)) -#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p)) -#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b)) - -#endif - diff --git a/arch/arm/mach-ixp2000/include/mach/platform.h b/arch/arm/mach-ixp2000/include/mach/platform.h deleted file mode 100644 index bb0f8dcf9ee1..000000000000 --- a/arch/arm/mach-ixp2000/include/mach/platform.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/platform.h - * - * Various bits of code used by platform-level code. - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - -#ifndef __ASSEMBLY__ - -static inline unsigned long ixp2000_reg_read(volatile void *reg) -{ - return *((volatile unsigned long *)reg); -} - -static inline void ixp2000_reg_write(volatile void *reg, unsigned long val) -{ - *((volatile unsigned long *)reg) = val; -} - -/* - * On the IXP2400, we can't use XCB=000 due to chip bugs. We use - * XCB=101 instead, but that makes all I/O accesses bufferable. This - * is not a problem in general, but we do have to be slightly more - * careful because I/O writes are no longer automatically flushed out - * of the write buffer. - * - * In cases where we want to make sure that a write has been flushed - * out of the write buffer before we proceed, for example when masking - * a device interrupt before re-enabling IRQs in CPSR, we can use this - * function, ixp2000_reg_wrb, which performs a write, a readback, and - * issues a dummy instruction dependent on the value of the readback - * (mov rX, rX) to make sure that the readback has completed before we - * continue. - */ -static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val) -{ - unsigned long dummy; - - *((volatile unsigned long *)reg) = val; - - dummy = *((volatile unsigned long *)reg); - __asm__ __volatile__("mov %0, %0" : "+r" (dummy)); -} - -/* - * Boards may multiplex different devices on the 2nd channel of - * the slowport interface that each need different configuration - * settings. For example, the IXDP2400 uses channel 2 on the interface - * to access the CPLD, the switch fabric card, and the media card. Each - * one needs a different mode so drivers must save/restore the mode - * before and after each operation. - * - * acquire_slowport(&your_config); - * ... - * do slowport operations - * ... - * release_slowport(); - * - * Note that while you have the slowport, you are holding a spinlock, - * so your code should be written as if you explicitly acquired a lock. - * - * The configuration only affects device 2 on the slowport, so the - * MTD map driver does not acquire/release the slowport. - */ -struct slowport_cfg { - unsigned long CCR; /* Clock divide */ - unsigned long WTC; /* Write Timing Control */ - unsigned long RTC; /* Read Timing Control */ - unsigned long PCR; /* Protocol Control Register */ - unsigned long ADC; /* Address/Data Width Control */ -}; - - -void ixp2000_acquire_slowport(struct slowport_cfg *, struct slowport_cfg *); -void ixp2000_release_slowport(struct slowport_cfg *); - -/* - * IXP2400 A0/A1 and IXP2800 A0/A1/A2 have broken slowport that requires - * tweaking of addresses in the MTD driver. - */ -static inline unsigned ixp2000_has_broken_slowport(void) -{ - unsigned long id = *IXP2000_PRODUCT_ID; - unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK | - IXP2000_MIN_PROD_TYPE_MASK); - return (((id_prod == - /* fixed in IXP2400-B0 */ - (IXP2000_MAJ_PROD_TYPE_IXP2000 | - IXP2000_MIN_PROD_TYPE_IXP2400)) && - ((id & IXP2000_MAJ_REV_MASK) == 0)) || - ((id_prod == - /* fixed in IXP2800-B0 */ - (IXP2000_MAJ_PROD_TYPE_IXP2000 | - IXP2000_MIN_PROD_TYPE_IXP2800)) && - ((id & IXP2000_MAJ_REV_MASK) == 0)) || - ((id_prod == - /* fixed in IXP2850-B0 */ - (IXP2000_MAJ_PROD_TYPE_IXP2000 | - IXP2000_MIN_PROD_TYPE_IXP2850)) && - ((id & IXP2000_MAJ_REV_MASK) == 0))); -} - -static inline unsigned int ixp2000_has_flash(void) -{ - return ((*IXP2000_STRAP_OPTIONS) & (CFG_BOOT_PROM)); -} - -static inline unsigned int ixp2000_is_pcimaster(void) -{ - return ((*IXP2000_STRAP_OPTIONS) & (CFG_PCI_BOOT_HOST)); -} - -void ixp2000_map_io(void); -void ixp2000_uart_init(void); -void ixp2000_init_irq(void); -void ixp2000_init_time(unsigned long); -void ixp2000_restart(char, const char *); -unsigned long ixp2000_gettimeoffset(void); - -struct pci_sys_data; - -u32 *ixp2000_pci_config_addr(unsigned int bus, unsigned int devfn, int where); -void ixp2000_pci_preinit(void); -int ixp2000_pci_setup(int, struct pci_sys_data*); -struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*); -int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *); -int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32); - -/* - * Several of the IXP2000 systems have banked flash so we need to extend the - * flash_platform_data structure with some private pointers - */ -struct ixp2000_flash_data { - struct flash_platform_data *platform_data; - int nr_banks; - unsigned long (*bank_setup)(unsigned long); -}; - -struct ixp2000_i2c_pins { - unsigned long sda_pin; - unsigned long scl_pin; -}; - - -#endif /* !__ASSEMBLY__ */ diff --git a/arch/arm/mach-ixp2000/include/mach/timex.h b/arch/arm/mach-ixp2000/include/mach/timex.h deleted file mode 100644 index 835e659f93d4..000000000000 --- a/arch/arm/mach-ixp2000/include/mach/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/timex.h - * - * IXP2000 architecture timex specifications - */ - - -/* - * Default clock is 50MHz APB, but platform code can override this - */ -#define CLOCK_TICK_RATE 50000000 - - diff --git a/arch/arm/mach-ixp2000/include/mach/uncompress.h b/arch/arm/mach-ixp2000/include/mach/uncompress.h deleted file mode 100644 index ce363087df78..000000000000 --- a/arch/arm/mach-ixp2000/include/mach/uncompress.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * arch/arm/mach-ixp2000/include/mach/uncompress.h - * - * - * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2002 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/serial_reg.h> - -#define UART_BASE 0xc0030000 - -#define PHYS(x) ((volatile unsigned long *)(UART_BASE + x)) - -#define UARTDR PHYS(0x00) /* Transmit reg dlab=0 */ -#define UARTDLL PHYS(0x00) /* Divisor Latch reg dlab=1*/ -#define UARTDLM PHYS(0x04) /* Divisor Latch reg dlab=1*/ -#define UARTIER PHYS(0x04) /* Interrupt enable reg */ -#define UARTFCR PHYS(0x08) /* FIFO control reg dlab =0*/ -#define UARTLCR PHYS(0x0c) /* Control reg */ -#define UARTSR PHYS(0x14) /* Status reg */ - - -static inline void putc(int c) -{ - int j = 0x1000; - - while (--j && !(*UARTSR & UART_LSR_THRE)) - barrier(); - - *UARTDR = c; -} - -static inline void flush(void) -{ -} - -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c deleted file mode 100644 index 915ad49e3b8f..000000000000 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * arch/arm/mach-ixp2000/ixdp2400.c - * - * IXDP2400 platform support - * - * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/bitops.h> -#include <linux/pci.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> - -#include <asm/mach/pci.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include <asm/mach/flash.h> -#include <asm/mach/arch.h> - -/************************************************************************* - * IXDP2400 timer tick - *************************************************************************/ -static void __init ixdp2400_timer_init(void) -{ - int numerator, denominator; - int denom_array[] = {2, 4, 8, 16, 1, 2, 4, 8}; - - numerator = (*(IXDP2400_CPLD_SYS_CLK_M) & 0xFF) *2; - denominator = denom_array[(*(IXDP2400_CPLD_SYS_CLK_N) & 0x7)]; - - ixp2000_init_time(((3125000 * numerator) / (denominator)) / 2); -} - -static struct sys_timer ixdp2400_timer = { - .init = ixdp2400_timer_init, - .offset = ixp2000_gettimeoffset, -}; - -/************************************************************************* - * IXDP2400 PCI - *************************************************************************/ -void __init ixdp2400_pci_preinit(void) -{ - ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000); - ixp2000_pci_preinit(); - pcibios_setup("firmware"); -} - -int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys) -{ - sys->mem_offset = 0xe0000000; - - ixp2000_pci_setup(nr, sys); - - return 1; -} - -static int __init ixdp2400_pci_map_irq(const struct pci_dev *dev, u8 slot, - u8 pin) -{ - if (ixdp2x00_master_npu()) { - - /* - * Root bus devices. Slave NPU is only one with interrupt. - * Everything else, we just return -1 b/c nothing else - * on the root bus has interrupts. - */ - if(!dev->bus->self) { - if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN ) - return IRQ_IXDP2400_INGRESS_NPU; - - return -1; - } - - /* - * Bridge behind the PMC slot. - * NOTE: Only INTA from the PMC slot is routed. VERY BAD. - */ - if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN && - dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN && - !dev->bus->parent->self->bus->parent) - return IRQ_IXDP2400_PMC; - - /* - * Device behind the first bridge - */ - if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) { - switch(dev->devfn) { - case IXDP2400_MASTER_ENET_DEVFN: - return IRQ_IXDP2400_ENET; - - case IXDP2400_MEDIA_DEVFN: - return IRQ_IXDP2400_MEDIA_PCI; - - case IXDP2400_SWITCH_FABRIC_DEVFN: - return IRQ_IXDP2400_SF_PCI; - - case IXDP2X00_PMC_DEVFN: - return IRQ_IXDP2400_PMC; - } - } - - return -1; - } else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */ -} - - -static void ixdp2400_pci_postinit(void) -{ - struct pci_dev *dev; - - if (ixdp2x00_master_npu()) { - dev = pci_get_bus_and_slot(1, IXDP2400_SLAVE_ENET_DEVFN); - pci_stop_and_remove_bus_device(dev); - pci_dev_put(dev); - } else { - dev = pci_get_bus_and_slot(1, IXDP2400_MASTER_ENET_DEVFN); - pci_stop_and_remove_bus_device(dev); - pci_dev_put(dev); - - ixdp2x00_slave_pci_postinit(); - } -} - -static struct hw_pci ixdp2400_pci __initdata = { - .nr_controllers = 1, - .setup = ixdp2400_pci_setup, - .preinit = ixdp2400_pci_preinit, - .postinit = ixdp2400_pci_postinit, - .scan = ixp2000_pci_scan_bus, - .map_irq = ixdp2400_pci_map_irq, -}; - -int __init ixdp2400_pci_init(void) -{ - if (machine_is_ixdp2400()) - pci_common_init(&ixdp2400_pci); - - return 0; -} - -subsys_initcall(ixdp2400_pci_init); - -void __init ixdp2400_init_irq(void) -{ - ixdp2x00_init_irq(IXDP2400_CPLD_INT_STAT, IXDP2400_CPLD_INT_MASK, IXDP2400_NR_IRQS); -} - -MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform") - /* Maintainer: MontaVista Software, Inc. */ - .atag_offset = 0x100, - .map_io = ixdp2x00_map_io, - .init_irq = ixdp2400_init_irq, - .timer = &ixdp2400_timer, - .init_machine = ixdp2x00_init_machine, - .restart = ixp2000_restart, -MACHINE_END - diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c deleted file mode 100644 index a9f1819ea049..000000000000 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ /dev/null @@ -1,295 +0,0 @@ -/* - * arch/arm/mach-ixp2000/ixdp2800.c - * - * IXDP2800 platform support - * - * Original Author: Jeffrey Daly <jeffrey.daly@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/bitops.h> -#include <linux/pci.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> - -#include <asm/mach/pci.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include <asm/mach/flash.h> -#include <asm/mach/arch.h> - -/************************************************************************* - * IXDP2800 timer tick - *************************************************************************/ - -static void __init ixdp2800_timer_init(void) -{ - ixp2000_init_time(50000000); -} - -static struct sys_timer ixdp2800_timer = { - .init = ixdp2800_timer_init, - .offset = ixp2000_gettimeoffset, -}; - -/************************************************************************* - * IXDP2800 PCI - *************************************************************************/ -static void __init ixdp2800_slave_disable_pci_master(void) -{ - *IXP2000_PCI_CMDSTAT &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); -} - -static void __init ixdp2800_master_wait_for_slave(void) -{ - volatile u32 *addr; - - printk(KERN_INFO "IXDP2800: waiting for slave NPU to configure " - "its BAR sizes\n"); - - addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN, - PCI_BASE_ADDRESS_1); - do { - *addr = 0xffffffff; - cpu_relax(); - } while (*addr != 0xfe000008); - - addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN, - PCI_BASE_ADDRESS_2); - do { - *addr = 0xffffffff; - cpu_relax(); - } while (*addr != 0xc0000008); - - /* - * Configure the slave's SDRAM BAR by hand. - */ - *addr = 0x40000008; -} - -static void __init ixdp2800_slave_wait_for_master_enable(void) -{ - printk(KERN_INFO "IXDP2800: waiting for master NPU to enable us\n"); - - while ((*IXP2000_PCI_CMDSTAT & PCI_COMMAND_MASTER) == 0) - cpu_relax(); -} - -void __init ixdp2800_pci_preinit(void) -{ - printk("ixdp2x00_pci_preinit called\n"); - - *IXP2000_PCI_ADDR_EXT = 0x0001e000; - - if (!ixdp2x00_master_npu()) - ixdp2800_slave_disable_pci_master(); - - *IXP2000_PCI_SRAM_BASE_ADDR_MASK = (0x2000000 - 1) & ~0x3ffff; - *IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff; - - ixp2000_pci_preinit(); - - if (ixdp2x00_master_npu()) { - /* - * Wait until the slave set its SRAM/SDRAM BAR sizes - * correctly before we proceed to scan and enumerate - * the bus. - */ - ixdp2800_master_wait_for_slave(); - - /* - * We configure the SDRAM BARs by hand because they - * are 1G and fall outside of the regular allocated - * PCI address space. - */ - *IXP2000_PCI_SDRAM_BAR = 0x00000008; - } else { - /* - * Wait for the master to complete scanning the bus - * and assigning resources before we proceed to scan - * the bus ourselves. Set pci=firmware to honor the - * master's resource assignment. - */ - ixdp2800_slave_wait_for_master_enable(); - pcibios_setup("firmware"); - } -} - -/* - * We assign the SDRAM BARs for the two IXP2800 CPUs by hand, outside - * of the regular PCI window, because there's only 512M of outbound PCI - * memory window on each IXP, while we need 1G for each of the BARs. - */ -static void __devinit ixp2800_pci_fixup(struct pci_dev *dev) -{ - if (machine_is_ixdp2800()) { - dev->resource[2].start = 0; - dev->resource[2].end = 0; - dev->resource[2].flags = 0; - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IXP2800, ixp2800_pci_fixup); - -static int __init ixdp2800_pci_setup(int nr, struct pci_sys_data *sys) -{ - sys->mem_offset = 0x00000000; - - ixp2000_pci_setup(nr, sys); - - return 1; -} - -static int __init ixdp2800_pci_map_irq(const struct pci_dev *dev, u8 slot, - u8 pin) -{ - if (ixdp2x00_master_npu()) { - - /* - * Root bus devices. Slave NPU is only one with interrupt. - * Everything else, we just return -1 which is invalid. - */ - if(!dev->bus->self) { - if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN ) - return IRQ_IXDP2800_INGRESS_NPU; - - return -1; - } - - /* - * Bridge behind the PMC slot. - */ - if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN && - dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN && - !dev->bus->parent->self->bus->parent) - return IRQ_IXDP2800_PMC; - - /* - * Device behind the first bridge - */ - if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) { - switch(dev->devfn) { - case IXDP2X00_PMC_DEVFN: - return IRQ_IXDP2800_PMC; - - case IXDP2800_MASTER_ENET_DEVFN: - return IRQ_IXDP2800_EGRESS_ENET; - - case IXDP2800_SWITCH_FABRIC_DEVFN: - return IRQ_IXDP2800_FABRIC; - } - } - - return -1; - } else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */ -} - -static void __init ixdp2800_master_enable_slave(void) -{ - volatile u32 *addr; - - printk(KERN_INFO "IXDP2800: enabling slave NPU\n"); - - addr = (volatile u32 *)ixp2000_pci_config_addr(0, - IXDP2X00_SLAVE_NPU_DEVFN, - PCI_COMMAND); - - *addr |= PCI_COMMAND_MASTER; -} - -static void __init ixdp2800_master_wait_for_slave_bus_scan(void) -{ - volatile u32 *addr; - - printk(KERN_INFO "IXDP2800: waiting for slave to finish bus scan\n"); - - addr = (volatile u32 *)ixp2000_pci_config_addr(0, - IXDP2X00_SLAVE_NPU_DEVFN, - PCI_COMMAND); - while ((*addr & PCI_COMMAND_MEMORY) == 0) - cpu_relax(); -} - -static void __init ixdp2800_slave_signal_bus_scan_completion(void) -{ - printk(KERN_INFO "IXDP2800: bus scan done, signaling master\n"); - *IXP2000_PCI_CMDSTAT |= PCI_COMMAND_MEMORY; -} - -static void __init ixdp2800_pci_postinit(void) -{ - if (!ixdp2x00_master_npu()) { - ixdp2x00_slave_pci_postinit(); - ixdp2800_slave_signal_bus_scan_completion(); - } -} - -struct __initdata hw_pci ixdp2800_pci __initdata = { - .nr_controllers = 1, - .setup = ixdp2800_pci_setup, - .preinit = ixdp2800_pci_preinit, - .postinit = ixdp2800_pci_postinit, - .scan = ixp2000_pci_scan_bus, - .map_irq = ixdp2800_pci_map_irq, -}; - -int __init ixdp2800_pci_init(void) -{ - if (machine_is_ixdp2800()) { - struct pci_dev *dev; - - pci_common_init(&ixdp2800_pci); - if (ixdp2x00_master_npu()) { - dev = pci_get_bus_and_slot(1, IXDP2800_SLAVE_ENET_DEVFN); - pci_stop_and_remove_bus_device(dev); - pci_dev_put(dev); - - ixdp2800_master_enable_slave(); - ixdp2800_master_wait_for_slave_bus_scan(); - } else { - dev = pci_get_bus_and_slot(1, IXDP2800_MASTER_ENET_DEVFN); - pci_stop_and_remove_bus_device(dev); - pci_dev_put(dev); - } - } - - return 0; -} - -subsys_initcall(ixdp2800_pci_init); - -void __init ixdp2800_init_irq(void) -{ - ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2800_NR_IRQS); -} - -MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform") - /* Maintainer: MontaVista Software, Inc. */ - .atag_offset = 0x100, - .map_io = ixdp2x00_map_io, - .init_irq = ixdp2800_init_irq, - .timer = &ixdp2800_timer, - .init_machine = ixdp2x00_init_machine, - .restart = ixp2000_restart, -MACHINE_END - diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c deleted file mode 100644 index 421e38dc0fac..000000000000 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * arch/arm/mach-ixp2000/ixdp2x00.c - * - * Code common to IXDP2400 and IXDP2800 platforms. - * - * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/bitops.h> -#include <linux/pci.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> - -#include <asm/mach/pci.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include <asm/mach/flash.h> -#include <asm/mach/arch.h> - -#include <mach/gpio-ixp2000.h> - -/************************************************************************* - * IXDP2x00 IRQ Initialization - *************************************************************************/ -static volatile unsigned long *board_irq_mask; -static volatile unsigned long *board_irq_stat; -static unsigned long board_irq_count; - -#ifdef CONFIG_ARCH_IXDP2400 -/* - * Slowport configuration for accessing CPLD registers on IXDP2x00 - */ -static struct slowport_cfg slowport_cpld_cfg = { - .CCR = SLOWPORT_CCR_DIV_2, - .WTC = 0x00000070, - .RTC = 0x00000070, - .PCR = SLOWPORT_MODE_FLASH, - .ADC = SLOWPORT_ADDR_WIDTH_24 | SLOWPORT_DATA_WIDTH_8 -}; -#endif - -static void ixdp2x00_irq_mask(struct irq_data *d) -{ - unsigned long dummy; - static struct slowport_cfg old_cfg; - - /* - * This is ugly in common code but really don't know - * of a better way to handle it. :( - */ -#ifdef CONFIG_ARCH_IXDP2400 - if (machine_is_ixdp2400()) - ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg); -#endif - - dummy = *board_irq_mask; - dummy |= IXP2000_BOARD_IRQ_MASK(d->irq); - ixp2000_reg_wrb(board_irq_mask, dummy); - -#ifdef CONFIG_ARCH_IXDP2400 - if (machine_is_ixdp2400()) - ixp2000_release_slowport(&old_cfg); -#endif -} - -static void ixdp2x00_irq_unmask(struct irq_data *d) -{ - unsigned long dummy; - static struct slowport_cfg old_cfg; - -#ifdef CONFIG_ARCH_IXDP2400 - if (machine_is_ixdp2400()) - ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg); -#endif - - dummy = *board_irq_mask; - dummy &= ~IXP2000_BOARD_IRQ_MASK(d->irq); - ixp2000_reg_wrb(board_irq_mask, dummy); - - if (machine_is_ixdp2400()) - ixp2000_release_slowport(&old_cfg); -} - -static void ixdp2x00_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - volatile u32 ex_interrupt = 0; - static struct slowport_cfg old_cfg; - int i; - - desc->irq_data.chip->irq_mask(&desc->irq_data); - -#ifdef CONFIG_ARCH_IXDP2400 - if (machine_is_ixdp2400()) - ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg); -#endif - ex_interrupt = *board_irq_stat & 0xff; - if (machine_is_ixdp2400()) - ixp2000_release_slowport(&old_cfg); - - if(!ex_interrupt) { - printk(KERN_ERR "Spurious IXDP2x00 CPLD interrupt!\n"); - return; - } - - for(i = 0; i < board_irq_count; i++) { - if(ex_interrupt & (1 << i)) { - int cpld_irq = IXP2000_BOARD_IRQ(0) + i; - generic_handle_irq(cpld_irq); - } - } - - desc->irq_data.chip->irq_unmask(&desc->irq_data); -} - -static struct irq_chip ixdp2x00_cpld_irq_chip = { - .irq_ack = ixdp2x00_irq_mask, - .irq_mask = ixdp2x00_irq_mask, - .irq_unmask = ixdp2x00_irq_unmask -}; - -void __init ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long *mask_reg, unsigned long nr_of_irqs) -{ - unsigned int irq; - - ixp2000_init_irq(); - - if (!ixdp2x00_master_npu()) - return; - - board_irq_stat = stat_reg; - board_irq_mask = mask_reg; - board_irq_count = nr_of_irqs; - - *board_irq_mask = 0xffffffff; - - for(irq = IXP2000_BOARD_IRQ(0); irq < IXP2000_BOARD_IRQ(board_irq_count); irq++) { - irq_set_chip_and_handler(irq, &ixdp2x00_cpld_irq_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - /* Hook into PCI interrupt */ - irq_set_chained_handler(IRQ_IXP2000_PCIB, ixdp2x00_irq_handler); -} - -/************************************************************************* - * IXDP2x00 memory map - *************************************************************************/ -static struct map_desc ixdp2x00_io_desc __initdata = { - .virtual = IXDP2X00_VIRT_CPLD_BASE, - .pfn = __phys_to_pfn(IXDP2X00_PHYS_CPLD_BASE), - .length = IXDP2X00_CPLD_SIZE, - .type = MT_DEVICE -}; - -void __init ixdp2x00_map_io(void) -{ - ixp2000_map_io(); - - iotable_init(&ixdp2x00_io_desc, 1); -} - -/************************************************************************* - * IXDP2x00-common PCI init - * - * The IXDP2[48]00 has a horrid PCI bus layout. Basically the board - * contains two NPUs (ingress and egress) connected over PCI, both running - * instances of the kernel. So far so good. Peers on the PCI bus running - * Linux is a common design in telecom systems. The problem is that instead - * of all the devices being controlled by a single host, different - * devices are controlled by different NPUs on the same bus, leading to - * multiple hosts on the bus. The exact bus layout looks like: - * - * Bus 0 - * Master NPU <-------------------+-------------------> Slave NPU - * | - * | - * P2P - * | - * - * Bus 1 | - * <--+------+---------+---------+------+--> - * | | | | | - * | | | | | - * ... Dev PMC Media Eth0 Eth1 ... - * - * The master controls all but Eth1, which is controlled by the - * slave. What this means is that the both the master and the slave - * have to scan the bus, but only one of them can enumerate the bus. - * In addition, after the bus is scanned, each kernel must remove - * the device(s) it does not control from the PCI dev list otherwise - * a driver on each NPU will try to manage it and we will have horrible - * conflicts. Oh..and the slave NPU needs to see the master NPU - * for Intel's drivers to work properly. Closed source drivers... - * - * The way we deal with this is fairly simple but ugly: - * - * 1) Let master scan and enumerate the bus completely. - * 2) Master deletes Eth1 from device list. - * 3) Slave scans bus and then deletes all but Eth1 (Eth0 on slave) - * from device list. - * 4) Find HW designers and LART them. - * - * The boards also do not do normal PCI IRQ routing, or any sort of - * sensical swizzling, so we just need to check where on the bus a - * device sits and figure out to which CPLD pin the interrupt is routed. - * See ixdp2[48]00.c files. - * - *************************************************************************/ -void ixdp2x00_slave_pci_postinit(void) -{ - struct pci_dev *dev; - - /* - * Remove PMC device is there is one - */ - if((dev = pci_get_bus_and_slot(1, IXDP2X00_PMC_DEVFN))) { - pci_stop_and_remove_bus_device(dev); - pci_dev_put(dev); - } - - dev = pci_get_bus_and_slot(0, IXDP2X00_21555_DEVFN); - pci_stop_and_remove_bus_device(dev); - pci_dev_put(dev); -} - -/************************************************************************** - * IXDP2x00 Machine Setup - *************************************************************************/ -static struct flash_platform_data ixdp2x00_platform_data = { - .map_name = "cfi_probe", - .width = 1, -}; - -static struct ixp2000_flash_data ixdp2x00_flash_data = { - .platform_data = &ixdp2x00_platform_data, - .nr_banks = 1 -}; - -static struct resource ixdp2x00_flash_resource = { - .start = 0xc4000000, - .end = 0xc4000000 + 0x00ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ixdp2x00_flash = { - .name = "IXP2000-Flash", - .id = 0, - .dev = { - .platform_data = &ixdp2x00_flash_data, - }, - .num_resources = 1, - .resource = &ixdp2x00_flash_resource, -}; - -static struct ixp2000_i2c_pins ixdp2x00_i2c_gpio_pins = { - .sda_pin = IXDP2X00_GPIO_SDA, - .scl_pin = IXDP2X00_GPIO_SCL, -}; - -static struct platform_device ixdp2x00_i2c_controller = { - .name = "IXP2000-I2C", - .id = 0, - .dev = { - .platform_data = &ixdp2x00_i2c_gpio_pins, - }, - .num_resources = 0 -}; - -static struct platform_device *ixdp2x00_devices[] __initdata = { - &ixdp2x00_flash, - &ixdp2x00_i2c_controller -}; - -void __init ixdp2x00_init_machine(void) -{ - gpio_line_set(IXDP2X00_GPIO_I2C_ENABLE, 1); - gpio_line_config(IXDP2X00_GPIO_I2C_ENABLE, GPIO_OUT); - - platform_add_devices(ixdp2x00_devices, ARRAY_SIZE(ixdp2x00_devices)); - ixp2000_uart_init(); -} - diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c deleted file mode 100644 index 5196c39cdba4..000000000000 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ /dev/null @@ -1,483 +0,0 @@ -/* - * arch/arm/mach-ixp2000/ixdp2x01.c - * - * Code common to Intel IXDP2401 and IXDP2801 platforms - * - * Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002-2003 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/bitops.h> -#include <linux/pci.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> - -#include <asm/mach/pci.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> - -/************************************************************************* - * IXDP2x01 IRQ Handling - *************************************************************************/ -static void ixdp2x01_irq_mask(struct irq_data *d) -{ - ixp2000_reg_wrb(IXDP2X01_INT_MASK_SET_REG, - IXP2000_BOARD_IRQ_MASK(d->irq)); -} - -static void ixdp2x01_irq_unmask(struct irq_data *d) -{ - ixp2000_reg_write(IXDP2X01_INT_MASK_CLR_REG, - IXP2000_BOARD_IRQ_MASK(d->irq)); -} - -static u32 valid_irq_mask; - -static void ixdp2x01_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - u32 ex_interrupt; - int i; - - desc->irq_data.chip->irq_mask(&desc->irq_data); - - ex_interrupt = *IXDP2X01_INT_STAT_REG & valid_irq_mask; - - if (!ex_interrupt) { - printk(KERN_ERR "Spurious IXDP2X01 CPLD interrupt!\n"); - return; - } - - for (i = 0; i < IXP2000_BOARD_IRQS; i++) { - if (ex_interrupt & (1 << i)) { - int cpld_irq = IXP2000_BOARD_IRQ(0) + i; - generic_handle_irq(cpld_irq); - } - } - - desc->irq_data.chip->irq_unmask(&desc->irq_data); -} - -static struct irq_chip ixdp2x01_irq_chip = { - .irq_mask = ixdp2x01_irq_mask, - .irq_ack = ixdp2x01_irq_mask, - .irq_unmask = ixdp2x01_irq_unmask -}; - -/* - * We only do anything if we are the master NPU on the board. - * The slave NPU only has the ethernet chip going directly to - * the PCIB interrupt input. - */ -void __init ixdp2x01_init_irq(void) -{ - int irq = 0; - - /* initialize chip specific interrupts */ - ixp2000_init_irq(); - - if (machine_is_ixdp2401()) - valid_irq_mask = IXDP2401_VALID_IRQ_MASK; - else - valid_irq_mask = IXDP2801_VALID_IRQ_MASK; - - /* Mask all interrupts from CPLD, disable simulation */ - ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, 0xffffffff); - ixp2000_reg_wrb(IXDP2X01_INT_SIM_REG, 0); - - for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) { - if (irq & valid_irq_mask) { - irq_set_chip_and_handler(irq, &ixdp2x01_irq_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } else { - set_irq_flags(irq, 0); - } - } - - /* Hook into PCI interrupts */ - irq_set_chained_handler(IRQ_IXP2000_PCIB, ixdp2x01_irq_handler); -} - - -/************************************************************************* - * IXDP2x01 memory map - *************************************************************************/ -static struct map_desc ixdp2x01_io_desc __initdata = { - .virtual = IXDP2X01_VIRT_CPLD_BASE, - .pfn = __phys_to_pfn(IXDP2X01_PHYS_CPLD_BASE), - .length = IXDP2X01_CPLD_REGION_SIZE, - .type = MT_DEVICE -}; - -static void __init ixdp2x01_map_io(void) -{ - ixp2000_map_io(); - iotable_init(&ixdp2x01_io_desc, 1); -} - - -/************************************************************************* - * IXDP2x01 serial ports - *************************************************************************/ -static struct plat_serial8250_port ixdp2x01_serial_port1[] = { - { - .mapbase = (unsigned long)IXDP2X01_UART1_PHYS_BASE, - .membase = (char *)IXDP2X01_UART1_VIRT_BASE, - .irq = IRQ_IXDP2X01_UART1, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM32, - .regshift = 2, - .uartclk = IXDP2X01_UART_CLK, - }, - { } -}; - -static struct resource ixdp2x01_uart_resource1 = { - .start = IXDP2X01_UART1_PHYS_BASE, - .end = IXDP2X01_UART1_PHYS_BASE + 0xffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ixdp2x01_serial_device1 = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM1, - .dev = { - .platform_data = ixdp2x01_serial_port1, - }, - .num_resources = 1, - .resource = &ixdp2x01_uart_resource1, -}; - -static struct plat_serial8250_port ixdp2x01_serial_port2[] = { - { - .mapbase = (unsigned long)IXDP2X01_UART2_PHYS_BASE, - .membase = (char *)IXDP2X01_UART2_VIRT_BASE, - .irq = IRQ_IXDP2X01_UART2, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM32, - .regshift = 2, - .uartclk = IXDP2X01_UART_CLK, - }, - { } -}; - -static struct resource ixdp2x01_uart_resource2 = { - .start = IXDP2X01_UART2_PHYS_BASE, - .end = IXDP2X01_UART2_PHYS_BASE + 0xffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ixdp2x01_serial_device2 = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM2, - .dev = { - .platform_data = ixdp2x01_serial_port2, - }, - .num_resources = 1, - .resource = &ixdp2x01_uart_resource2, -}; - -static void ixdp2x01_uart_init(void) -{ - platform_device_register(&ixdp2x01_serial_device1); - platform_device_register(&ixdp2x01_serial_device2); -} - - -/************************************************************************* - * IXDP2x01 timer tick configuration - *************************************************************************/ -static unsigned int ixdp2x01_clock; - -static int __init ixdp2x01_clock_setup(char *str) -{ - ixdp2x01_clock = simple_strtoul(str, NULL, 10); - - return 1; -} - -__setup("ixdp2x01_clock=", ixdp2x01_clock_setup); - -static void __init ixdp2x01_timer_init(void) -{ - if (!ixdp2x01_clock) - ixdp2x01_clock = 50000000; - - ixp2000_init_time(ixdp2x01_clock); -} - -static struct sys_timer ixdp2x01_timer = { - .init = ixdp2x01_timer_init, - .offset = ixp2000_gettimeoffset, -}; - -/************************************************************************* - * IXDP2x01 PCI - *************************************************************************/ -void __init ixdp2x01_pci_preinit(void) -{ - ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00000000); - ixp2000_pci_preinit(); - pcibios_setup("firmware"); -} - -#define DEVPIN(dev, pin) ((pin) | ((dev) << 3)) - -static int __init ixdp2x01_pci_map_irq(const struct pci_dev *dev, u8 slot, - u8 pin) -{ - u8 bus = dev->bus->number; - u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin); - struct pci_bus *tmp_bus = dev->bus; - - /* Primary bus, no interrupts here */ - if (bus == 0) { - return -1; - } - - /* Lookup first leaf in bus tree */ - while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL)) { - tmp_bus = tmp_bus->parent; - } - - /* Select between known bridges */ - switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) { - /* Device is located after first MB bridge */ - case 0x0008: - if (tmp_bus == dev->bus) { - /* Device is located directly after first MB bridge */ - switch (devpin) { - case DEVPIN(1, 1): /* Onboard 82546 ch 0 */ - if (machine_is_ixdp2401()) - return IRQ_IXDP2401_INTA_82546; - return -1; - case DEVPIN(1, 2): /* Onboard 82546 ch 1 */ - if (machine_is_ixdp2401()) - return IRQ_IXDP2401_INTB_82546; - return -1; - case DEVPIN(0, 1): /* PMC INTA# */ - return IRQ_IXDP2X01_SPCI_PMC_INTA; - case DEVPIN(0, 2): /* PMC INTB# */ - return IRQ_IXDP2X01_SPCI_PMC_INTB; - case DEVPIN(0, 3): /* PMC INTC# */ - return IRQ_IXDP2X01_SPCI_PMC_INTC; - case DEVPIN(0, 4): /* PMC INTD# */ - return IRQ_IXDP2X01_SPCI_PMC_INTD; - } - } - break; - case 0x0010: - if (tmp_bus == dev->bus) { - /* Device is located directly after second MB bridge */ - /* Secondary bus of second bridge */ - switch (devpin) { - case DEVPIN(0, 1): /* DB#0 */ - return IRQ_IXDP2X01_SPCI_DB_0; - case DEVPIN(1, 1): /* DB#1 */ - return IRQ_IXDP2X01_SPCI_DB_1; - } - } else { - /* Device is located indirectly after second MB bridge */ - /* Not supported now */ - } - break; - } - - return -1; -} - - -static int ixdp2x01_pci_setup(int nr, struct pci_sys_data *sys) -{ - sys->mem_offset = 0xe0000000; - - if (machine_is_ixdp2801() || machine_is_ixdp28x5()) - sys->mem_offset -= ((*IXP2000_PCI_ADDR_EXT & 0xE000) << 16); - - return ixp2000_pci_setup(nr, sys); -} - -struct hw_pci ixdp2x01_pci __initdata = { - .nr_controllers = 1, - .setup = ixdp2x01_pci_setup, - .preinit = ixdp2x01_pci_preinit, - .scan = ixp2000_pci_scan_bus, - .map_irq = ixdp2x01_pci_map_irq, -}; - -int __init ixdp2x01_pci_init(void) -{ - if (machine_is_ixdp2401() || machine_is_ixdp2801() ||\ - machine_is_ixdp28x5()) - pci_common_init(&ixdp2x01_pci); - - return 0; -} - -subsys_initcall(ixdp2x01_pci_init); - -/************************************************************************* - * IXDP2x01 Machine Initialization - *************************************************************************/ -static struct flash_platform_data ixdp2x01_flash_platform_data = { - .map_name = "cfi_probe", - .width = 1, -}; - -static unsigned long ixdp2x01_flash_bank_setup(unsigned long ofs) -{ - ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG, - ((ofs >> IXDP2X01_FLASH_WINDOW_BITS) | IXDP2X01_CPLD_FLASH_INTERN)); - return (ofs & IXDP2X01_FLASH_WINDOW_MASK); -} - -static struct ixp2000_flash_data ixdp2x01_flash_data = { - .platform_data = &ixdp2x01_flash_platform_data, - .bank_setup = ixdp2x01_flash_bank_setup -}; - -static struct resource ixdp2x01_flash_resource = { - .start = 0xc4000000, - .end = 0xc4000000 + 0x01ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ixdp2x01_flash = { - .name = "IXP2000-Flash", - .id = 0, - .dev = { - .platform_data = &ixdp2x01_flash_data, - }, - .num_resources = 1, - .resource = &ixdp2x01_flash_resource, -}; - -static struct ixp2000_i2c_pins ixdp2x01_i2c_gpio_pins = { - .sda_pin = IXDP2X01_GPIO_SDA, - .scl_pin = IXDP2X01_GPIO_SCL, -}; - -static struct platform_device ixdp2x01_i2c_controller = { - .name = "IXP2000-I2C", - .id = 0, - .dev = { - .platform_data = &ixdp2x01_i2c_gpio_pins, - }, - .num_resources = 0 -}; - -static struct platform_device *ixdp2x01_devices[] __initdata = { - &ixdp2x01_flash, - &ixdp2x01_i2c_controller -}; - -static void __init ixdp2x01_init_machine(void) -{ - ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG, - (IXDP2X01_CPLD_FLASH_BANK_MASK | IXDP2X01_CPLD_FLASH_INTERN)); - - ixdp2x01_flash_data.nr_banks = - ((*IXDP2X01_CPLD_FLASH_REG & IXDP2X01_CPLD_FLASH_BANK_MASK) + 1); - - platform_add_devices(ixdp2x01_devices, ARRAY_SIZE(ixdp2x01_devices)); - ixp2000_uart_init(); - ixdp2x01_uart_init(); -} - -static void ixdp2401_restart(char mode, const char *cmd) -{ - /* - * Reset flash banking register so that we are pointing at - * RedBoot bank. - */ - ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG, - ((0 >> IXDP2X01_FLASH_WINDOW_BITS) - | IXDP2X01_CPLD_FLASH_INTERN)); - ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff); - - ixp2000_restart(mode, cmd); -} - -static void ixdp280x_restart(char mode, const char *cmd) -{ - /* - * On IXDP2801 we need to write this magic sequence to the CPLD - * to cause a complete reset of the CPU and all external devices - * and move the flash bank register back to 0. - */ - unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG; - - reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF); - ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg); - ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000); - - ixp2000_restart(mode, cmd); -} - -#ifdef CONFIG_ARCH_IXDP2401 -MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform") - /* Maintainer: MontaVista Software, Inc. */ - .atag_offset = 0x100, - .map_io = ixdp2x01_map_io, - .init_irq = ixdp2x01_init_irq, - .timer = &ixdp2x01_timer, - .init_machine = ixdp2x01_init_machine, - .restart = ixdp2401_restart, -MACHINE_END -#endif - -#ifdef CONFIG_ARCH_IXDP2801 -MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform") - /* Maintainer: MontaVista Software, Inc. */ - .atag_offset = 0x100, - .map_io = ixdp2x01_map_io, - .init_irq = ixdp2x01_init_irq, - .timer = &ixdp2x01_timer, - .init_machine = ixdp2x01_init_machine, - .restart = ixdp280x_restart, -MACHINE_END - -/* - * IXDP28x5 is basically an IXDP2801 with a different CPU but Intel - * changed the machine ID in the bootloader - */ -MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform") - /* Maintainer: MontaVista Software, Inc. */ - .atag_offset = 0x100, - .map_io = ixdp2x01_map_io, - .init_irq = ixdp2x01_init_irq, - .timer = &ixdp2x01_timer, - .init_machine = ixdp2x01_init_machine, - .restart = ixdp280x_restart, -MACHINE_END -#endif - - diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c deleted file mode 100644 index 9c02de932fac..000000000000 --- a/arch/arm/mach-ixp2000/pci.c +++ /dev/null @@ -1,252 +0,0 @@ -/* - * arch/arm/mach-ixp2000/pci.c - * - * PCI routines for IXDP2400/IXDP2800 boards - * - * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> - * Maintained by: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -#include <asm/mach/pci.h> - -static volatile int pci_master_aborts = 0; - -static int clear_master_aborts(void); - -u32 * -ixp2000_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where) -{ - u32 *paddress; - - if (PCI_SLOT(devfn) > 7) - return 0; - - /* Must be dword aligned */ - where &= ~3; - - /* - * For top bus, generate type 0, else type 1 - */ - if (!bus_nr) { - /* only bits[23:16] are used for IDSEL */ - paddress = (u32 *) (IXP2000_PCI_CFG0_VIRT_BASE - | (1 << (PCI_SLOT(devfn) + 16)) - | (PCI_FUNC(devfn) << 8) | where); - } else { - paddress = (u32 *) (IXP2000_PCI_CFG1_VIRT_BASE - | (bus_nr << 16) - | (PCI_SLOT(devfn) << 11) - | (PCI_FUNC(devfn) << 8) | where); - } - - return paddress; -} - -/* - * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes. - * 0 and 3 are not valid indexes... - */ -static u32 bytemask[] = { - /*0*/ 0, - /*1*/ 0xff, - /*2*/ 0xffff, - /*3*/ 0, - /*4*/ 0xffffffff, -}; - - -int ixp2000_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *value) -{ - u32 n; - u32 *addr; - - n = where % 4; - - addr = ixp2000_pci_config_addr(bus->number, devfn, where); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - - pci_master_aborts = 0; - *value = (*addr >> (8*n)) & bytemask[size]; - if (pci_master_aborts) { - pci_master_aborts = 0; - *value = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - return PCIBIOS_SUCCESSFUL; -} - -/* - * We don't do error checks by calling clear_master_aborts() b/c the - * assumption is that the caller did a read first to make sure a device - * exists. - */ -int ixp2000_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 value) -{ - u32 mask; - u32 *addr; - u32 temp; - - mask = ~(bytemask[size] << ((where % 0x4) * 8)); - addr = ixp2000_pci_config_addr(bus->number, devfn, where); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - temp = (u32) (value) << ((where % 0x4) * 8); - *addr = (*addr & mask) | temp; - - clear_master_aborts(); - - return PCIBIOS_SUCCESSFUL; -} - - -static struct pci_ops ixp2000_pci_ops = { - .read = ixp2000_pci_read_config, - .write = ixp2000_pci_write_config -}; - -struct pci_bus *ixp2000_pci_scan_bus(int nr, struct pci_sys_data *sysdata) -{ - return pci_scan_root_bus(NULL, sysdata->busnr, &ixp2000_pci_ops, - sysdata, &sysdata->resources); -} - - -int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - - volatile u32 temp; - unsigned long flags; - - pci_master_aborts = 1; - - local_irq_save(flags); - temp = *(IXP2000_PCI_CONTROL); - if (temp & ((1 << 8) | (1 << 5))) { - ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp); - } - - temp = *(IXP2000_PCI_CMDSTAT); - if (temp & (1 << 29)) { - while (temp & (1 << 29)) { - ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp); - temp = *(IXP2000_PCI_CMDSTAT); - } - } - local_irq_restore(flags); - - /* - * If it was an imprecise abort, then we need to correct the - * return address to be _after_ the instruction. - */ - if (fsr & (1 << 10)) - regs->ARM_pc += 4; - - return 0; -} - -int -clear_master_aborts(void) -{ - volatile u32 temp; - unsigned long flags; - - local_irq_save(flags); - temp = *(IXP2000_PCI_CONTROL); - if (temp & ((1 << 8) | (1 << 5))) { - ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp); - } - - temp = *(IXP2000_PCI_CMDSTAT); - if (temp & (1 << 29)) { - while (temp & (1 << 29)) { - ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp); - temp = *(IXP2000_PCI_CMDSTAT); - } - } - local_irq_restore(flags); - - return 0; -} - -void __init -ixp2000_pci_preinit(void) -{ - pci_set_flags(0); - - pcibios_min_io = 0; - pcibios_min_mem = 0; - -#ifndef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO - /* - * Configure the PCI unit to properly byteswap I/O transactions, - * and verify that it worked. - */ - ixp2000_reg_write(IXP2000_PCI_CONTROL, - (*IXP2000_PCI_CONTROL | PCI_CONTROL_IEE)); - - if ((*IXP2000_PCI_CONTROL & PCI_CONTROL_IEE) == 0) - panic("IXP2000: PCI I/O is broken on this ixp model, and " - "the needed workaround has not been configured in"); -#endif - - hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, 0, - "PCI config cycle to non-existent device"); -} - - -/* - * IXP2000 systems often have large resource requirements, so we just - * use our own resource space. - */ -static struct resource ixp2000_pci_mem_space = { - .start = 0xe0000000, - .end = 0xffffffff, - .flags = IORESOURCE_MEM, - .name = "PCI Mem Space" -}; - -static struct resource ixp2000_pci_io_space = { - .start = 0x00010000, - .end = 0x0001ffff, - .flags = IORESOURCE_IO, - .name = "PCI I/O Space" -}; - -int ixp2000_pci_setup(int nr, struct pci_sys_data *sys) -{ - if (nr >= 1) - return 0; - - pci_add_resource_offset(&sys->resources, - &ixp2000_pci_io_space, sys->io_offset); - pci_add_resource_offset(&sys->resources, - &ixp2000_pci_mem_space, sys->mem_offset); - - return 1; -} - diff --git a/arch/arm/mach-ixp23xx/Kconfig b/arch/arm/mach-ixp23xx/Kconfig deleted file mode 100644 index 982670ec3866..000000000000 --- a/arch/arm/mach-ixp23xx/Kconfig +++ /dev/null @@ -1,25 +0,0 @@ -if ARCH_IXP23XX - -config ARCH_SUPPORTS_BIG_ENDIAN - bool - default y - -menu "Intel IXP23xx Implementation Options" - -comment "IXP23xx Platforms" - -config MACH_ESPRESSO - bool "Support IP Fabrics Double Espresso platform" - help - -config MACH_IXDP2351 - bool "Support Intel IXDP2351 platform" - help - -config MACH_ROADRUNNER - bool "Support ADI RoadRunner platform" - help - -endmenu - -endif diff --git a/arch/arm/mach-ixp23xx/Makefile b/arch/arm/mach-ixp23xx/Makefile deleted file mode 100644 index 288b371b6d03..000000000000 --- a/arch/arm/mach-ixp23xx/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# Makefile for the linux kernel. -# -obj-y := core.o pci.o -obj-m := -obj-n := -obj- := - -obj-$(CONFIG_MACH_ESPRESSO) += espresso.o -obj-$(CONFIG_MACH_IXDP2351) += ixdp2351.o -obj-$(CONFIG_MACH_ROADRUNNER) += roadrunner.o diff --git a/arch/arm/mach-ixp23xx/Makefile.boot b/arch/arm/mach-ixp23xx/Makefile.boot deleted file mode 100644 index 44fb4a717c3f..000000000000 --- a/arch/arm/mach-ixp23xx/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c deleted file mode 100644 index d34542425990..000000000000 --- a/arch/arm/mach-ixp23xx/core.c +++ /dev/null @@ -1,455 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/core.c - * - * Core routines for IXP23xx chips - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2005 (c) MontaVista Software, Inc. - * - * Based on 2.4 code Copyright 2004 (c) Intel Corporation - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/bitops.h> -#include <linux/serial_8250.h> -#include <linux/serial_core.h> -#include <linux/device.h> -#include <linux/mm.h> -#include <linux/time.h> -#include <linux/timex.h> - -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/tlbflush.h> -#include <asm/pgtable.h> -#include <asm/system_misc.h> - -#include <asm/mach/map.h> -#include <asm/mach/time.h> -#include <asm/mach/irq.h> -#include <asm/mach/arch.h> - - -/************************************************************************* - * Chip specific mappings shared by all IXP23xx systems - *************************************************************************/ -static struct map_desc ixp23xx_io_desc[] __initdata = { - { /* XSI-CPP CSRs */ - .virtual = IXP23XX_XSI2CPP_CSR_VIRT, - .pfn = __phys_to_pfn(IXP23XX_XSI2CPP_CSR_PHYS), - .length = IXP23XX_XSI2CPP_CSR_SIZE, - .type = MT_DEVICE, - }, { /* Expansion Bus Config */ - .virtual = IXP23XX_EXP_CFG_VIRT, - .pfn = __phys_to_pfn(IXP23XX_EXP_CFG_PHYS), - .length = IXP23XX_EXP_CFG_SIZE, - .type = MT_DEVICE, - }, { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACS,.... */ - .virtual = IXP23XX_PERIPHERAL_VIRT, - .pfn = __phys_to_pfn(IXP23XX_PERIPHERAL_PHYS), - .length = IXP23XX_PERIPHERAL_SIZE, - .type = MT_DEVICE, - }, { /* CAP CSRs */ - .virtual = IXP23XX_CAP_CSR_VIRT, - .pfn = __phys_to_pfn(IXP23XX_CAP_CSR_PHYS), - .length = IXP23XX_CAP_CSR_SIZE, - .type = MT_DEVICE, - }, { /* MSF CSRs */ - .virtual = IXP23XX_MSF_CSR_VIRT, - .pfn = __phys_to_pfn(IXP23XX_MSF_CSR_PHYS), - .length = IXP23XX_MSF_CSR_SIZE, - .type = MT_DEVICE, - }, { /* PCI I/O Space */ - .virtual = IXP23XX_PCI_IO_VIRT, - .pfn = __phys_to_pfn(IXP23XX_PCI_IO_PHYS), - .length = IXP23XX_PCI_IO_SIZE, - .type = MT_DEVICE, - }, { /* PCI Config Space */ - .virtual = IXP23XX_PCI_CFG_VIRT, - .pfn = __phys_to_pfn(IXP23XX_PCI_CFG_PHYS), - .length = IXP23XX_PCI_CFG_SIZE, - .type = MT_DEVICE, - }, { /* PCI local CFG CSRs */ - .virtual = IXP23XX_PCI_CREG_VIRT, - .pfn = __phys_to_pfn(IXP23XX_PCI_CREG_PHYS), - .length = IXP23XX_PCI_CREG_SIZE, - .type = MT_DEVICE, - }, { /* PCI MEM Space */ - .virtual = IXP23XX_PCI_MEM_VIRT, - .pfn = __phys_to_pfn(IXP23XX_PCI_MEM_PHYS), - .length = IXP23XX_PCI_MEM_SIZE, - .type = MT_DEVICE, - } -}; - -void __init ixp23xx_map_io(void) -{ - iotable_init(ixp23xx_io_desc, ARRAY_SIZE(ixp23xx_io_desc)); -} - - -/*************************************************************************** - * IXP23xx Interrupt Handling - ***************************************************************************/ -enum ixp23xx_irq_type { - IXP23XX_IRQ_LEVEL, IXP23XX_IRQ_EDGE -}; - -static void ixp23xx_config_irq(unsigned int, enum ixp23xx_irq_type); - -static int ixp23xx_irq_set_type(struct irq_data *d, unsigned int type) -{ - int line = d->irq - IRQ_IXP23XX_GPIO6 + 6; - u32 int_style; - enum ixp23xx_irq_type irq_type; - volatile u32 *int_reg; - - /* - * Only GPIOs 6-15 are wired to interrupts on IXP23xx - */ - if (line < 6 || line > 15) - return -EINVAL; - - switch (type) { - case IRQ_TYPE_EDGE_BOTH: - int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL; - irq_type = IXP23XX_IRQ_EDGE; - break; - case IRQ_TYPE_EDGE_RISING: - int_style = IXP23XX_GPIO_STYLE_RISING_EDGE; - irq_type = IXP23XX_IRQ_EDGE; - break; - case IRQ_TYPE_EDGE_FALLING: - int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE; - irq_type = IXP23XX_IRQ_EDGE; - break; - case IRQ_TYPE_LEVEL_HIGH: - int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH; - irq_type = IXP23XX_IRQ_LEVEL; - break; - case IRQ_TYPE_LEVEL_LOW: - int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW; - irq_type = IXP23XX_IRQ_LEVEL; - break; - default: - return -EINVAL; - } - - ixp23xx_config_irq(d->irq, irq_type); - - if (line >= 8) { /* pins 8-15 */ - line -= 8; - int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT2R; - } else { /* pins 0-7 */ - int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT1R; - } - - /* - * Clear pending interrupts - */ - *IXP23XX_GPIO_GPISR = (1 << line); - - /* Clear the style for the appropriate pin */ - *int_reg &= ~(IXP23XX_GPIO_STYLE_MASK << - (line * IXP23XX_GPIO_STYLE_SIZE)); - - /* Set the new style */ - *int_reg |= (int_style << (line * IXP23XX_GPIO_STYLE_SIZE)); - - return 0; -} - -static void ixp23xx_irq_mask(struct irq_data *d) -{ - volatile unsigned long *intr_reg; - unsigned int irq = d->irq; - - if (irq >= 56) - irq += 8; - - intr_reg = IXP23XX_INTR_EN1 + (irq / 32); - *intr_reg &= ~(1 << (irq % 32)); -} - -static void ixp23xx_irq_ack(struct irq_data *d) -{ - int line = d->irq - IRQ_IXP23XX_GPIO6 + 6; - - if ((line < 6) || (line > 15)) - return; - - *IXP23XX_GPIO_GPISR = (1 << line); -} - -/* - * Level triggered interrupts on GPIO lines can only be cleared when the - * interrupt condition disappears. - */ -static void ixp23xx_irq_level_unmask(struct irq_data *d) -{ - volatile unsigned long *intr_reg; - unsigned int irq = d->irq; - - ixp23xx_irq_ack(d); - - if (irq >= 56) - irq += 8; - - intr_reg = IXP23XX_INTR_EN1 + (irq / 32); - *intr_reg |= (1 << (irq % 32)); -} - -static void ixp23xx_irq_edge_unmask(struct irq_data *d) -{ - volatile unsigned long *intr_reg; - unsigned int irq = d->irq; - - if (irq >= 56) - irq += 8; - - intr_reg = IXP23XX_INTR_EN1 + (irq / 32); - *intr_reg |= (1 << (irq % 32)); -} - -static struct irq_chip ixp23xx_irq_level_chip = { - .irq_ack = ixp23xx_irq_mask, - .irq_mask = ixp23xx_irq_mask, - .irq_unmask = ixp23xx_irq_level_unmask, - .irq_set_type = ixp23xx_irq_set_type -}; - -static struct irq_chip ixp23xx_irq_edge_chip = { - .irq_ack = ixp23xx_irq_ack, - .irq_mask = ixp23xx_irq_mask, - .irq_unmask = ixp23xx_irq_edge_unmask, - .irq_set_type = ixp23xx_irq_set_type -}; - -static void ixp23xx_pci_irq_mask(struct irq_data *d) -{ - unsigned int irq = d->irq; - - *IXP23XX_PCI_XSCALE_INT_ENABLE &= ~(1 << (IRQ_IXP23XX_INTA + 27 - irq)); -} - -static void ixp23xx_pci_irq_unmask(struct irq_data *d) -{ - unsigned int irq = d->irq; - - *IXP23XX_PCI_XSCALE_INT_ENABLE |= (1 << (IRQ_IXP23XX_INTA + 27 - irq)); -} - -/* - * TODO: Should this just be done at ASM level? - */ -static void pci_handler(unsigned int irq, struct irq_desc *desc) -{ - u32 pci_interrupt; - unsigned int irqno; - - pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS; - - desc->irq_data.chip->irq_ack(&desc->irq_data); - - /* See which PCI_INTA, or PCI_INTB interrupted */ - if (pci_interrupt & (1 << 26)) { - irqno = IRQ_IXP23XX_INTB; - } else if (pci_interrupt & (1 << 27)) { - irqno = IRQ_IXP23XX_INTA; - } else { - BUG(); - } - - generic_handle_irq(irqno); - - desc->irq_data.chip->irq_unmask(&desc->irq_data); -} - -static struct irq_chip ixp23xx_pci_irq_chip = { - .irq_ack = ixp23xx_pci_irq_mask, - .irq_mask = ixp23xx_pci_irq_mask, - .irq_unmask = ixp23xx_pci_irq_unmask -}; - -static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type) -{ - switch (type) { - case IXP23XX_IRQ_LEVEL: - irq_set_chip_and_handler(irq, &ixp23xx_irq_level_chip, - handle_level_irq); - break; - case IXP23XX_IRQ_EDGE: - irq_set_chip_and_handler(irq, &ixp23xx_irq_edge_chip, - handle_edge_irq); - break; - } - set_irq_flags(irq, IRQF_VALID); -} - -void __init ixp23xx_init_irq(void) -{ - int irq; - - /* Route everything to IRQ */ - *IXP23XX_INTR_SEL1 = 0x0; - *IXP23XX_INTR_SEL2 = 0x0; - *IXP23XX_INTR_SEL3 = 0x0; - *IXP23XX_INTR_SEL4 = 0x0; - - /* Mask all sources */ - *IXP23XX_INTR_EN1 = 0x0; - *IXP23XX_INTR_EN2 = 0x0; - *IXP23XX_INTR_EN3 = 0x0; - *IXP23XX_INTR_EN4 = 0x0; - - /* - * Configure all IRQs for level-sensitive operation - */ - for (irq = 0; irq <= NUM_IXP23XX_RAW_IRQS; irq++) { - ixp23xx_config_irq(irq, IXP23XX_IRQ_LEVEL); - } - - for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) { - irq_set_chip_and_handler(irq, &ixp23xx_pci_irq_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - irq_set_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler); -} - - -/************************************************************************* - * Timer-tick functions for IXP23xx - *************************************************************************/ -#define CLOCK_TICKS_PER_USEC (CLOCK_TICK_RATE / USEC_PER_SEC) - -static unsigned long next_jiffy_time; - -static unsigned long -ixp23xx_gettimeoffset(void) -{ - unsigned long elapsed; - - elapsed = *IXP23XX_TIMER_CONT - (next_jiffy_time - LATCH); - - return elapsed / CLOCK_TICKS_PER_USEC; -} - -static irqreturn_t -ixp23xx_timer_interrupt(int irq, void *dev_id) -{ - /* Clear Pending Interrupt by writing '1' to it */ - *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND; - while ((signed long)(*IXP23XX_TIMER_CONT - next_jiffy_time) >= LATCH) { - timer_tick(); - next_jiffy_time += LATCH; - } - - return IRQ_HANDLED; -} - -static struct irqaction ixp23xx_timer_irq = { - .name = "IXP23xx Timer Tick", - .handler = ixp23xx_timer_interrupt, - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, -}; - -void __init ixp23xx_init_timer(void) -{ - /* Clear Pending Interrupt by writing '1' to it */ - *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND; - - /* Setup the Timer counter value */ - *IXP23XX_TIMER1_RELOAD = - (LATCH & ~IXP23XX_TIMER_RELOAD_MASK) | IXP23XX_TIMER_ENABLE; - - *IXP23XX_TIMER_CONT = 0; - next_jiffy_time = LATCH; - - /* Connect the interrupt handler and enable the interrupt */ - setup_irq(IRQ_IXP23XX_TIMER1, &ixp23xx_timer_irq); -} - -struct sys_timer ixp23xx_timer = { - .init = ixp23xx_init_timer, - .offset = ixp23xx_gettimeoffset, -}; - - -/************************************************************************* - * IXP23xx Platform Initialization - *************************************************************************/ -static struct resource ixp23xx_uart_resources[] = { - { - .start = IXP23XX_UART1_PHYS, - .end = IXP23XX_UART1_PHYS + 0x0fff, - .flags = IORESOURCE_MEM - }, { - .start = IXP23XX_UART2_PHYS, - .end = IXP23XX_UART2_PHYS + 0x0fff, - .flags = IORESOURCE_MEM - } -}; - -static struct plat_serial8250_port ixp23xx_uart_data[] = { - { - .mapbase = IXP23XX_UART1_PHYS, - .membase = (char *)(IXP23XX_UART1_VIRT + 3), - .irq = IRQ_IXP23XX_UART1, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP23XX_UART_XTAL, - }, { - .mapbase = IXP23XX_UART2_PHYS, - .membase = (char *)(IXP23XX_UART2_VIRT + 3), - .irq = IRQ_IXP23XX_UART2, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP23XX_UART_XTAL, - }, - { }, -}; - -static struct platform_device ixp23xx_uart = { - .name = "serial8250", - .id = 0, - .dev.platform_data = ixp23xx_uart_data, - .num_resources = 2, - .resource = ixp23xx_uart_resources, -}; - -static struct platform_device *ixp23xx_devices[] __initdata = { - &ixp23xx_uart, -}; - -void __init ixp23xx_sys_init(void) -{ - /* by default, the idle code is disabled */ - disable_hlt(); - - *IXP23XX_EXP_UNIT_FUSE |= 0xf; - platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices)); -} - -void ixp23xx_restart(char mode, const char *cmd) -{ - /* Use on-chip reset capability */ - *IXP23XX_RESET0 |= IXP23XX_RST_ALL; -} diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c deleted file mode 100644 index d142d45dea12..000000000000 --- a/arch/arm/mach-ixp23xx/espresso.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/espresso.c - * - * Double Espresso-specific routines - * - * Author: Lennert Buytenhek <buytenh@wantstofly.org> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/bitops.h> -#include <linux/ioport.h> -#include <linux/serial_8250.h> -#include <linux/serial_core.h> -#include <linux/device.h> -#include <linux/mm.h> -#include <linux/pci.h> -#include <linux/mtd/physmap.h> - -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/irq.h> -#include <asm/tlbflush.h> -#include <asm/pgtable.h> - -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> - -static int __init espresso_pci_init(void) -{ - if (machine_is_espresso()) - ixp23xx_pci_slave_init(); - - return 0; -}; -subsys_initcall(espresso_pci_init); - -static struct physmap_flash_data espresso_flash_data = { - .width = 2, -}; - -static struct resource espresso_flash_resource = { - .start = 0x90000000, - .end = 0x91ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device espresso_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &espresso_flash_data, - }, - .num_resources = 1, - .resource = &espresso_flash_resource, -}; - -static void __init espresso_init(void) -{ - platform_device_register(&espresso_flash); - - /* - * Mark flash as writeable. - */ - IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE; - IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE; - - ixp23xx_sys_init(); -} - -MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso") - /* Maintainer: Lennert Buytenhek */ - .map_io = ixp23xx_map_io, - .init_irq = ixp23xx_init_irq, - .timer = &ixp23xx_timer, - .atag_offset = 0x100, - .init_machine = espresso_init, - .restart = ixp23xx_restart, -MACHINE_END diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S deleted file mode 100644 index 5ff524c13744..000000000000 --- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S +++ /dev/null @@ -1,25 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <mach/ixp23xx.h> - - .macro addruart, rp, rv, tmp - ldr \rp, =IXP23XX_PERIPHERAL_PHYS @ physical - ldr \rv, =IXP23XX_PERIPHERAL_VIRT @ virtual -#ifdef __ARMEB__ - orr \rp, \rp, #0x00000003 - orr \rv, \rv, #0x00000003 -#endif - .endm - -#define UART_SHIFT 2 -#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-ixp23xx/include/mach/entry-macro.S b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S deleted file mode 100644 index 3fd2cb984e42..000000000000 --- a/arch/arm/mach-ixp23xx/include/mach/entry-macro.S +++ /dev/null @@ -1,31 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/entry-macro.S - */ - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET) - ldr \irqnr, [\irqnr] @ get interrupt number - cmp \irqnr, #0x0 @ spurious interrupt ? - movne \irqnr, \irqnr, lsr #2 @ skip unwanted low order bits - subne \irqnr, \irqnr, #1 @ convert to 0 based - -#if 0 - cmp \irqnr, #IRQ_IXP23XX_PCI_INT_RPH - bne 1001f - mov \irqnr, #IRQ_IXP23XX_INTA - - ldr \irqnr, =0xf5000030 - - mov \tmp, #(1<<26) - tst \irqnr, \tmp - movne \irqnr, #IRQ_IXP23XX_INTB - - mov \tmp, #(1<<27) - tst \irqnr, \tmp - movne \irqnr, #IRQ_IXP23XX_INTA -1001: -#endif - .endm diff --git a/arch/arm/mach-ixp23xx/include/mach/hardware.h b/arch/arm/mach-ixp23xx/include/mach/hardware.h deleted file mode 100644 index 60e55fa10238..000000000000 --- a/arch/arm/mach-ixp23xx/include/mach/hardware.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/hardware.h - * - * Copyright (C) 2002-2004 Intel Corporation. - * Copyricht (C) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Hardware definitions for IXP23XX based systems - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* PCI IO info */ - -#include "ixp23xx.h" - -/* - * Platform helper functions - */ -#include "platform.h" - -/* - * Platform-specific headers - */ -#include "ixdp2351.h" - - -#endif diff --git a/arch/arm/mach-ixp23xx/include/mach/io.h b/arch/arm/mach-ixp23xx/include/mach/io.h deleted file mode 100644 index a7aceb55c130..000000000000 --- a/arch/arm/mach-ixp23xx/include/mach/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/io.h - * - * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com> - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2003-2005 Intel Corp. - * Copyright (C) 2005 MontaVista Software, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(p) ((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT)) - -#endif diff --git a/arch/arm/mach-ixp23xx/include/mach/irqs.h b/arch/arm/mach-ixp23xx/include/mach/irqs.h deleted file mode 100644 index 3af33a04b8a2..000000000000 --- a/arch/arm/mach-ixp23xx/include/mach/irqs.h +++ /dev/null @@ -1,223 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/irqs.h - * - * IRQ definitions for IXP23XX based systems - * - * Author: Naeem Afzal <naeem.m.afzal@intel.com> - * - * Copyright (C) 2003-2004 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#define NR_IXP23XX_IRQS IRQ_IXP23XX_INTB+1 -#define IRQ_IXP23XX_EXTIRQS NR_IXP23XX_IRQS - - -#define IRQ_IXP23XX_DBG0 0 /* Debug/Execution/MBox */ -#define IRQ_IXP23XX_DBG1 1 /* Debug/Execution/MBox */ -#define IRQ_IXP23XX_NPE_TRG 2 /* npe_trigger */ -#define IRQ_IXP23XX_TIMER1 3 /* Timer[0] */ -#define IRQ_IXP23XX_TIMER2 4 /* Timer[1] */ -#define IRQ_IXP23XX_TIMESTAMP 5 /* Timer[2], Time-stamp */ -#define IRQ_IXP23XX_WDOG 6 /* Time[3], Watchdog Timer */ -#define IRQ_IXP23XX_PCI_DBELL 7 /* PCI Doorbell */ -#define IRQ_IXP23XX_PCI_DMA1 8 /* PCI DMA Channel 1 */ -#define IRQ_IXP23XX_PCI_DMA2 9 /* PCI DMA Channel 2 */ -#define IRQ_IXP23XX_PCI_DMA3 10 /* PCI DMA Channel 3 */ -#define IRQ_IXP23XX_PCI_INT_RPH 11 /* pcxg_pci_int_rph */ -#define IRQ_IXP23XX_CPP_PMU 12 /* xpxg_pm_int_rpl */ -#define IRQ_IXP23XX_SWINT0 13 /* S/W Interrupt0 */ -#define IRQ_IXP23XX_SWINT1 14 /* S/W Interrupt1 */ -#define IRQ_IXP23XX_UART2 15 /* UART1 Interrupt */ -#define IRQ_IXP23XX_UART1 16 /* UART0 Interrupt */ -#define IRQ_IXP23XX_XSI_PMU_ROLLOVER 17 /* AHB Performance M. Unit counter rollover */ -#define IRQ_IXP23XX_XSI_AHB_PM0 18 /* intr_pm_o */ -#define IRQ_IXP23XX_XSI_AHB_ECE0 19 /* intr_ece_o */ -#define IRQ_IXP23XX_XSI_AHB_GASKET 20 /* gas_intr_o */ -#define IRQ_IXP23XX_XSI_CPP 21 /* xsi2cpp_int */ -#define IRQ_IXP23XX_CPP_XSI 22 /* cpp2xsi_int */ -#define IRQ_IXP23XX_ME_ATTN0 23 /* ME_ATTN */ -#define IRQ_IXP23XX_ME_ATTN1 24 /* ME_ATTN */ -#define IRQ_IXP23XX_ME_ATTN2 25 /* ME_ATTN */ -#define IRQ_IXP23XX_ME_ATTN3 26 /* ME_ATTN */ -#define IRQ_IXP23XX_PCI_ERR_RPH 27 /* PCXG_PCI_ERR_RPH */ -#define IRQ_IXP23XX_D0XG_ECC_CORR 28 /* D0XG_DRAM_ECC_CORR */ -#define IRQ_IXP23XX_D0XG_ECC_UNCORR 29 /* D0XG_DRAM_ECC_UNCORR */ -#define IRQ_IXP23XX_SRAM_ERR1 30 /* SRAM1_ERR */ -#define IRQ_IXP23XX_SRAM_ERR0 31 /* SRAM0_ERR */ -#define IRQ_IXP23XX_MEDIA_ERR 32 /* MEDIA_ERR */ -#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ 33 /* STH_DRAM0_ECC_MAJ */ -#define IRQ_IXP23XX_GPIO6 34 /* GPIO0 interrupts */ -#define IRQ_IXP23XX_GPIO7 35 /* GPIO1 interrupts */ -#define IRQ_IXP23XX_GPIO8 36 /* GPIO2 interrupts */ -#define IRQ_IXP23XX_GPIO9 37 /* GPIO3 interrupts */ -#define IRQ_IXP23XX_GPIO10 38 /* GPIO4 interrupts */ -#define IRQ_IXP23XX_GPIO11 39 /* GPIO5 interrupts */ -#define IRQ_IXP23XX_GPIO12 40 /* GPIO6 interrupts */ -#define IRQ_IXP23XX_GPIO13 41 /* GPIO7 interrupts */ -#define IRQ_IXP23XX_GPIO14 42 /* GPIO8 interrupts */ -#define IRQ_IXP23XX_GPIO15 43 /* GPIO9 interrupts */ -#define IRQ_IXP23XX_SHAC_RING0 44 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING1 45 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING2 46 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING3 47 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING4 48 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING5 49 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING6 50 /* SHAC RING Full */ -#define IRQ_IXP23XX_SHAC_RING7 51 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING8 52 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING9 53 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING10 54 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING11 55 /* SHAC Ring Full */ -#define IRQ_IXP23XX_ME_THREAD_A0_ME0 56 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A1_ME0 57 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A2_ME0 58 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A3_ME0 59 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A4_ME0 60 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A5_ME0 61 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A6_ME0 62 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A7_ME0 63 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A8_ME1 64 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A9_ME1 65 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A10_ME1 66 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A11_ME1 67 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A12_ME1 68 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A13_ME1 69 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A14_ME1 70 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A15_ME1 71 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A16_ME2 72 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A17_ME2 73 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A18_ME2 74 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A19_ME2 75 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A20_ME2 76 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A21_ME2 77 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A22_ME2 78 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A23_ME2 79 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A24_ME3 80 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A25_ME3 81 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A26_ME3 82 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A27_ME3 83 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A28_ME3 84 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A29_ME3 85 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A30_ME3 86 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A31_ME3 87 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_B0_ME0 88 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B1_ME0 89 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B2_ME0 90 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B3_ME0 91 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B4_ME0 92 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B5_ME0 93 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B6_ME0 94 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B7_ME0 95 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B8_ME1 96 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B9_ME1 97 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B10_ME1 98 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B11_ME1 99 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B12_ME1 100 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B13_ME1 101 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B14_ME1 102 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B15_ME1 103 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B16_ME2 104 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B17_ME2 105 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B18_ME2 106 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B19_ME2 107 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B20_ME2 108 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B21_ME2 109 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B22_ME2 110 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B23_ME2 111 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B24_ME3 112 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B25_ME3 113 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B26_ME3 114 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B27_ME3 115 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B28_ME3 116 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B29_ME3 117 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B30_ME3 118 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B31_ME3 119 /* ME_THREAD_B */ - -#define NUM_IXP23XX_RAW_IRQS 120 - -#define IRQ_IXP23XX_INTA 120 /* Indirect pcxg_pci_int_rph */ -#define IRQ_IXP23XX_INTB 121 /* Indirect pcxg_pci_int_rph */ - -#define NR_IXP23XX_IRQ (IRQ_IXP23XX_INTB + 1) - -/* - * We default to 32 per-board IRQs. Increase this number if you need - * more, but keep it realistic. - */ -#define NR_IXP23XX_MACH_IRQS 32 - -#define NR_IRQS (NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS) - -#define IXP23XX_MACH_IRQ(irq) (NR_IXP23XX_IRQ + (irq)) - - -/* - * IXDP2351-specific interrupts - */ - -/* - * External PCI interrupts signaled through INTB - * - */ -#define IXDP2351_INTB_IRQ_BASE 0 -#define IRQ_IXDP2351_INTA_82546 IXP23XX_MACH_IRQ(0) -#define IRQ_IXDP2351_INTB_82546 IXP23XX_MACH_IRQ(1) -#define IRQ_IXDP2351_SPCI_DB_0 IXP23XX_MACH_IRQ(2) -#define IRQ_IXDP2351_SPCI_DB_1 IXP23XX_MACH_IRQ(3) -#define IRQ_IXDP2351_SPCI_PMC_INTA IXP23XX_MACH_IRQ(4) -#define IRQ_IXDP2351_SPCI_PMC_INTB IXP23XX_MACH_IRQ(5) -#define IRQ_IXDP2351_SPCI_PMC_INTC IXP23XX_MACH_IRQ(6) -#define IRQ_IXDP2351_SPCI_PMC_INTD IXP23XX_MACH_IRQ(7) -#define IRQ_IXDP2351_SPCI_FIC IXP23XX_MACH_IRQ(8) - -#define IXDP2351_INTB_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(0)) -#define IXDP2351_INTB_IRQ_MASK(irq) (1 << IXDP2351_INTB_IRQ_BIT(irq)) -#define IXDP2351_INTB_IRQ_VALID 0x01FF -#define IXDP2351_INTB_IRQ_NUM 16 - -/* - * Other external interrupts signaled through INTA - */ -#define IXDP2351_INTA_IRQ_BASE 16 -#define IRQ_IXDP2351_IPMI_FROM IXP23XX_MACH_IRQ(16) -#define IRQ_IXDP2351_125US IXP23XX_MACH_IRQ(17) -#define IRQ_IXDP2351_DB_0_ADD IXP23XX_MACH_IRQ(18) -#define IRQ_IXDP2351_DB_1_ADD IXP23XX_MACH_IRQ(19) -#define IRQ_IXDP2351_DEBUG1 IXP23XX_MACH_IRQ(20) -#define IRQ_IXDP2351_ADD_UART IXP23XX_MACH_IRQ(21) -#define IRQ_IXDP2351_FIC_ADD IXP23XX_MACH_IRQ(24) -#define IRQ_IXDP2351_CS8900 IXP23XX_MACH_IRQ(25) -#define IRQ_IXDP2351_BBSRAM IXP23XX_MACH_IRQ(26) -#define IRQ_IXDP2351_CONFIG_MEDIA IXP23XX_MACH_IRQ(27) -#define IRQ_IXDP2351_CLOCK_REF IXP23XX_MACH_IRQ(28) -#define IRQ_IXDP2351_A10_NP IXP23XX_MACH_IRQ(29) -#define IRQ_IXDP2351_A11_NP IXP23XX_MACH_IRQ(30) -#define IRQ_IXDP2351_DEBUG_NP IXP23XX_MACH_IRQ(31) - -#define IXDP2351_INTA_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(16)) -#define IXDP2351_INTA_IRQ_MASK(irq) (1 << IXDP2351_INTA_IRQ_BIT(irq)) -#define IXDP2351_INTA_IRQ_VALID 0xFF3F -#define IXDP2351_INTA_IRQ_NUM 16 - - -/* - * ADI RoadRunner IRQs - */ -#define IRQ_ROADRUNNER_PCI_INTA IRQ_IXP23XX_INTA -#define IRQ_ROADRUNNER_PCI_INTB IRQ_IXP23XX_INTB -#define IRQ_ROADRUNNER_PCI_INTC IRQ_IXP23XX_GPIO11 -#define IRQ_ROADRUNNER_PCI_INTD IRQ_IXP23XX_GPIO12 - -/* - * Put new board definitions here - */ - - -#endif diff --git a/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h b/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h deleted file mode 100644 index 663951027de5..000000000000 --- a/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/ixdp2351.h - * - * Register and other defines for IXDP2351 - * - * Copyright (c) 2002-2004 Intel Corp. - * Copytight (c) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_IXDP2351_H -#define __ASM_ARCH_IXDP2351_H - -/* - * NP module memory map - */ -#define IXDP2351_NP_PHYS_BASE (IXP23XX_EXP_BUS_CS4_BASE) -#define IXDP2351_NP_PHYS_SIZE 0x00100000 -#define IXDP2351_NP_VIRT_BASE 0xeff00000 - -#define IXDP2351_VIRT_CS8900_BASE (IXDP2351_NP_VIRT_BASE) -#define IXDP2351_VIRT_CS8900_END (IXDP2351_VIRT_CS8900_BASE + 16) - -#define IXDP2351_VIRT_NP_CPLD_BASE (IXP23XX_EXP_BUS_CS4_BASE_VIRT + 0x00010000) - -#define IXDP2351_NP_CPLD_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_NP_CPLD_BASE + reg)) - -#define IXDP2351_NP_CPLD_RESET1_REG IXDP2351_NP_CPLD_REG(0x00) -#define IXDP2351_NP_CPLD_LED_REG IXDP2351_NP_CPLD_REG(0x02) -#define IXDP2351_NP_CPLD_VERSION_REG IXDP2351_NP_CPLD_REG(0x04) - -/* - * Base board module memory map - */ - -#define IXDP2351_BB_BASE_PHYS (IXP23XX_EXP_BUS_CS5_BASE) -#define IXDP2351_BB_SIZE 0x01000000 -#define IXDP2351_BB_BASE_VIRT (0xee000000) - -#define IXDP2351_BB_AREA_BASE(offset) (IXDP2351_BB_BASE_VIRT + offset) - -#define IXDP2351_VIRT_NVRAM_BASE IXDP2351_BB_AREA_BASE(0x0) -#define IXDP2351_NVRAM_SIZE (0x20000) - -#define IXDP2351_VIRT_MB_IXF1104_BASE IXDP2351_BB_AREA_BASE(0x00020000) -#define IXDP2351_VIRT_ADD_UART_BASE IXDP2351_BB_AREA_BASE(0x000240C0) -#define IXDP2351_VIRT_FIC_BASE IXDP2351_BB_AREA_BASE(0x00200000) -#define IXDP2351_VIRT_DB0_BASE IXDP2351_BB_AREA_BASE(0x00400000) -#define IXDP2351_VIRT_DB1_BASE IXDP2351_BB_AREA_BASE(0x00600000) -#define IXDP2351_VIRT_CPLD_BASE IXDP2351_BB_AREA_BASE(0x00024000) - -/* - * On board CPLD registers - */ -#define IXDP2351_CPLD_BB_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_CPLD_BASE + reg)) - -#define IXDP2351_CPLD_RESET0_REG IXDP2351_CPLD_BB_REG(0x00) -#define IXDP2351_CPLD_RESET1_REG IXDP2351_CPLD_BB_REG(0x04) - -#define IXDP2351_CPLD_RESET1_MAGIC 0x55AA -#define IXDP2351_CPLD_RESET1_ENABLE 0x8000 - -#define IXDP2351_CPLD_FPGA_CONFIG_REG IXDP2351_CPLD_BB_REG(0x08) -#define IXDP2351_CPLD_INTB_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x10) -#define IXDP2351_CPLD_INTA_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x14) -#define IXDP2351_CPLD_INTB_STAT_REG IXDP2351_CPLD_BB_REG(0x18) -#define IXDP2351_CPLD_INTA_STAT_REG IXDP2351_CPLD_BB_REG(0x1C) -#define IXDP2351_CPLD_INTB_RAW_REG IXDP2351_CPLD_BB_REG(0x20) /* read */ -#define IXDP2351_CPLD_INTA_RAW_REG IXDP2351_CPLD_BB_REG(0x24) /* read */ -#define IXDP2351_CPLD_INTB_MASK_CLR_REG IXDP2351_CPLD_INTB_RAW_REG /* write */ -#define IXDP2351_CPLD_INTA_MASK_CLR_REG IXDP2351_CPLD_INTA_RAW_REG /* write */ -#define IXDP2351_CPLD_INTB_SIM_REG IXDP2351_CPLD_BB_REG(0x28) -#define IXDP2351_CPLD_INTA_SIM_REG IXDP2351_CPLD_BB_REG(0x2C) - /* Interrupt bits are defined in irqs.h */ -#define IXDP2351_CPLD_BB_GBE0_REG IXDP2351_CPLD_BB_REG(0x30) -#define IXDP2351_CPLD_BB_GBE1_REG IXDP2351_CPLD_BB_REG(0x34) - -/* #define IXDP2351_CPLD_BB_MISC_REG IXDP2351_CPLD_REG(0x1C) */ -/* #define IXDP2351_CPLD_BB_MISC_REV_MASK 0xFF */ -/* #define IXDP2351_CPLD_BB_GDXCS0_REG IXDP2351_CPLD_REG(0x24) */ -/* #define IXDP2351_CPLD_BB_GDXCS1_REG IXDP2351_CPLD_REG(0x28) */ -/* #define IXDP2351_CPLD_BB_CLOCK_REG IXDP2351_CPLD_REG(0x04) */ - - -#endif diff --git a/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h b/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h deleted file mode 100644 index 6d02481b1d6d..000000000000 --- a/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h +++ /dev/null @@ -1,298 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/ixp23xx.h - * - * Register definitions for IXP23XX - * - * Copyright (C) 2003-2005 Intel Corporation. - * Copyright (C) 2005 MontaVista Software, Inc. - * - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_IXP23XX_H -#define __ASM_ARCH_IXP23XX_H - -/* - * IXP2300 linux memory map: - * - * virt phys size - * fffd0000 a0000000 64K XSI2CPP_CSR - * fffc0000 c4000000 4K EXP_CFG - * fff00000 c8000000 64K PERIPHERAL - * fe000000 1c0000000 16M CAP_CSR - * fd000000 1c8000000 16M MSF_CSR - * fb000000 16M --- - * fa000000 1d8000000 32M PCI_IO - * f8000000 1da000000 32M PCI_CFG - * f6000000 1de000000 32M PCI_CREG - * f4000000 32M --- - * f0000000 1e0000000 64M PCI_MEM - * e[c-f]000000 per-platform mappings - */ - - -/**************************************************************************** - * Static mappings. - ****************************************************************************/ -#define IXP23XX_XSI2CPP_CSR_PHYS 0xa0000000 -#define IXP23XX_XSI2CPP_CSR_VIRT 0xfffd0000 -#define IXP23XX_XSI2CPP_CSR_SIZE 0x00010000 - -#define IXP23XX_EXP_CFG_PHYS 0xc4000000 -#define IXP23XX_EXP_CFG_VIRT 0xfffc0000 -#define IXP23XX_EXP_CFG_SIZE 0x00001000 - -#define IXP23XX_PERIPHERAL_PHYS 0xc8000000 -#define IXP23XX_PERIPHERAL_VIRT 0xfff00000 -#define IXP23XX_PERIPHERAL_SIZE 0x00010000 - -#define IXP23XX_CAP_CSR_PHYS 0x1c0000000ULL -#define IXP23XX_CAP_CSR_VIRT 0xfe000000 -#define IXP23XX_CAP_CSR_SIZE 0x01000000 - -#define IXP23XX_MSF_CSR_PHYS 0x1c8000000ULL -#define IXP23XX_MSF_CSR_VIRT 0xfd000000 -#define IXP23XX_MSF_CSR_SIZE 0x01000000 - -#define IXP23XX_PCI_IO_PHYS 0x1d8000000ULL -#define IXP23XX_PCI_IO_VIRT 0xfa000000 -#define IXP23XX_PCI_IO_SIZE 0x02000000 - -#define IXP23XX_PCI_CFG_PHYS 0x1da000000ULL -#define IXP23XX_PCI_CFG_VIRT 0xf8000000 -#define IXP23XX_PCI_CFG_SIZE 0x02000000 -#define IXP23XX_PCI_CFG0_VIRT IXP23XX_PCI_CFG_VIRT -#define IXP23XX_PCI_CFG1_VIRT (IXP23XX_PCI_CFG_VIRT + 0x01000000) - -#define IXP23XX_PCI_CREG_PHYS 0x1de000000ULL -#define IXP23XX_PCI_CREG_VIRT 0xf6000000 -#define IXP23XX_PCI_CREG_SIZE 0x02000000 -#define IXP23XX_PCI_CSR_VIRT (IXP23XX_PCI_CREG_VIRT + 0x01000000) - -#define IXP23XX_PCI_MEM_START 0xe0000000 -#define IXP23XX_PCI_MEM_PHYS 0x1e0000000ULL -#define IXP23XX_PCI_MEM_VIRT 0xf0000000 -#define IXP23XX_PCI_MEM_SIZE 0x04000000 - - -/**************************************************************************** - * XSI2CPP CSRs. - ****************************************************************************/ -#define IXP23XX_XSI2CPP_REG(x) ((volatile unsigned long *)(IXP23XX_XSI2CPP_CSR_VIRT + (x))) -#define IXP23XX_CPP2XSI_CURR_XFER_REG3 IXP23XX_XSI2CPP_REG(0xf8) -#define IXP23XX_CPP2XSI_ADDR_31 (1 << 19) -#define IXP23XX_CPP2XSI_PSH_OFF (1 << 20) -#define IXP23XX_CPP2XSI_COH_OFF (1 << 21) - - -/**************************************************************************** - * Expansion Bus Config. - ****************************************************************************/ -#define IXP23XX_EXP_CFG_REG(x) ((volatile unsigned long *)(IXP23XX_EXP_CFG_VIRT + (x))) -#define IXP23XX_EXP_CS0 IXP23XX_EXP_CFG_REG(0x00) -#define IXP23XX_EXP_CS1 IXP23XX_EXP_CFG_REG(0x04) -#define IXP23XX_EXP_CS2 IXP23XX_EXP_CFG_REG(0x08) -#define IXP23XX_EXP_CS3 IXP23XX_EXP_CFG_REG(0x0c) -#define IXP23XX_EXP_CS4 IXP23XX_EXP_CFG_REG(0x10) -#define IXP23XX_EXP_CS5 IXP23XX_EXP_CFG_REG(0x14) -#define IXP23XX_EXP_CS6 IXP23XX_EXP_CFG_REG(0x18) -#define IXP23XX_EXP_CS7 IXP23XX_EXP_CFG_REG(0x1c) -#define IXP23XX_FLASH_WRITABLE (0x2) -#define IXP23XX_FLASH_BUS8 (0x1) - -#define IXP23XX_EXP_CFG0 IXP23XX_EXP_CFG_REG(0x20) -#define IXP23XX_EXP_CFG1 IXP23XX_EXP_CFG_REG(0x24) -#define IXP23XX_EXP_CFG0_MEM_MAP (1 << 31) -#define IXP23XX_EXP_CFG0_XSCALE_SPEED_SEL (3 << 22) -#define IXP23XX_EXP_CFG0_XSCALE_SPEED_EN (1 << 21) -#define IXP23XX_EXP_CFG0_CPP_SPEED_SEL (3 << 19) -#define IXP23XX_EXP_CFG0_CPP_SPEED_EN (1 << 18) -#define IXP23XX_EXP_CFG0_PCI_SWIN (3 << 16) -#define IXP23XX_EXP_CFG0_PCI_DWIN (3 << 14) -#define IXP23XX_EXP_CFG0_PCI33_MODE (1 << 13) -#define IXP23XX_EXP_CFG0_QDR_SPEED_SEL (1 << 12) -#define IXP23XX_EXP_CFG0_CPP_DIV_SEL (1 << 5) -#define IXP23XX_EXP_CFG0_XSI_NOT_PRES (1 << 4) -#define IXP23XX_EXP_CFG0_PROM_BOOT (1 << 3) -#define IXP23XX_EXP_CFG0_PCI_ARB (1 << 2) -#define IXP23XX_EXP_CFG0_PCI_HOST (1 << 1) -#define IXP23XX_EXP_CFG0_FLASH_WIDTH (1 << 0) - -#define IXP23XX_EXP_UNIT_FUSE IXP23XX_EXP_CFG_REG(0x28) -#define IXP23XX_EXP_MSF_MUX IXP23XX_EXP_CFG_REG(0x30) -#define IXP23XX_EXP_CFG_FUSE IXP23XX_EXP_CFG_REG(0x34) - -#define IXP23XX_EXP_BUS_PHYS 0x90000000 -#define IXP23XX_EXP_BUS_WINDOW_SIZE 0x01000000 - -#define IXP23XX_EXP_BUS_CS0_BASE (IXP23XX_EXP_BUS_PHYS + 0x00000000) -#define IXP23XX_EXP_BUS_CS1_BASE (IXP23XX_EXP_BUS_PHYS + 0x01000000) -#define IXP23XX_EXP_BUS_CS2_BASE (IXP23XX_EXP_BUS_PHYS + 0x02000000) -#define IXP23XX_EXP_BUS_CS3_BASE (IXP23XX_EXP_BUS_PHYS + 0x03000000) -#define IXP23XX_EXP_BUS_CS4_BASE (IXP23XX_EXP_BUS_PHYS + 0x04000000) -#define IXP23XX_EXP_BUS_CS5_BASE (IXP23XX_EXP_BUS_PHYS + 0x05000000) -#define IXP23XX_EXP_BUS_CS6_BASE (IXP23XX_EXP_BUS_PHYS + 0x06000000) -#define IXP23XX_EXP_BUS_CS7_BASE (IXP23XX_EXP_BUS_PHYS + 0x07000000) - - -/**************************************************************************** - * Peripherals. - ****************************************************************************/ -#define IXP23XX_UART1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x0000) -#define IXP23XX_UART2_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x1000) -#define IXP23XX_PMU_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x2000) -#define IXP23XX_INTC_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x3000) -#define IXP23XX_GPIO_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x4000) -#define IXP23XX_TIMER_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x5000) -#define IXP23XX_NPE0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x6000) -#define IXP23XX_DSR_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x7000) -#define IXP23XX_NPE1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x8000) -#define IXP23XX_ETH0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x9000) -#define IXP23XX_ETH1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xA000) -#define IXP23XX_GIG0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xB000) -#define IXP23XX_GIG1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xC000) -#define IXP23XX_DDRS_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xD000) - -#define IXP23XX_UART1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x0000) -#define IXP23XX_UART2_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x1000) -#define IXP23XX_PMU_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x2000) -#define IXP23XX_INTC_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x3000) -#define IXP23XX_GPIO_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x4000) -#define IXP23XX_TIMER_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x5000) -#define IXP23XX_NPE0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x6000) -#define IXP23XX_DSR_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x7000) -#define IXP23XX_NPE1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x8000) -#define IXP23XX_ETH0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x9000) -#define IXP23XX_ETH1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xA000) -#define IXP23XX_GIG0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xB000) -#define IXP23XX_GIG1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xC000) -#define IXP23XX_DDRS_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xD000) - - -/**************************************************************************** - * Interrupt controller. - ****************************************************************************/ -#define IXP23XX_INTC_REG(x) ((volatile unsigned long *)(IXP23XX_INTC_VIRT + (x))) -#define IXP23XX_INTR_ST1 IXP23XX_INTC_REG(0x00) -#define IXP23XX_INTR_ST2 IXP23XX_INTC_REG(0x04) -#define IXP23XX_INTR_ST3 IXP23XX_INTC_REG(0x08) -#define IXP23XX_INTR_ST4 IXP23XX_INTC_REG(0x0c) -#define IXP23XX_INTR_EN1 IXP23XX_INTC_REG(0x10) -#define IXP23XX_INTR_EN2 IXP23XX_INTC_REG(0x14) -#define IXP23XX_INTR_EN3 IXP23XX_INTC_REG(0x18) -#define IXP23XX_INTR_EN4 IXP23XX_INTC_REG(0x1c) -#define IXP23XX_INTR_SEL1 IXP23XX_INTC_REG(0x20) -#define IXP23XX_INTR_SEL2 IXP23XX_INTC_REG(0x24) -#define IXP23XX_INTR_SEL3 IXP23XX_INTC_REG(0x28) -#define IXP23XX_INTR_SEL4 IXP23XX_INTC_REG(0x2c) -#define IXP23XX_INTR_IRQ_ST1 IXP23XX_INTC_REG(0x30) -#define IXP23XX_INTR_IRQ_ST2 IXP23XX_INTC_REG(0x34) -#define IXP23XX_INTR_IRQ_ST3 IXP23XX_INTC_REG(0x38) -#define IXP23XX_INTR_IRQ_ST4 IXP23XX_INTC_REG(0x3c) -#define IXP23XX_INTR_IRQ_ENC_ST_OFFSET 0x54 - - -/**************************************************************************** - * GPIO. - ****************************************************************************/ -#define IXP23XX_GPIO_REG(x) ((volatile unsigned long *)(IXP23XX_GPIO_VIRT + (x))) -#define IXP23XX_GPIO_GPOUTR IXP23XX_GPIO_REG(0x00) -#define IXP23XX_GPIO_GPOER IXP23XX_GPIO_REG(0x04) -#define IXP23XX_GPIO_GPINR IXP23XX_GPIO_REG(0x08) -#define IXP23XX_GPIO_GPISR IXP23XX_GPIO_REG(0x0c) -#define IXP23XX_GPIO_GPIT1R IXP23XX_GPIO_REG(0x10) -#define IXP23XX_GPIO_GPIT2R IXP23XX_GPIO_REG(0x14) -#define IXP23XX_GPIO_GPCLKR IXP23XX_GPIO_REG(0x18) -#define IXP23XX_GPIO_GPDBSELR IXP23XX_GPIO_REG(0x1c) - -#define IXP23XX_GPIO_STYLE_MASK 0x7 -#define IXP23XX_GPIO_STYLE_ACTIVE_HIGH 0x0 -#define IXP23XX_GPIO_STYLE_ACTIVE_LOW 0x1 -#define IXP23XX_GPIO_STYLE_RISING_EDGE 0x2 -#define IXP23XX_GPIO_STYLE_FALLING_EDGE 0x3 -#define IXP23XX_GPIO_STYLE_TRANSITIONAL 0x4 - -#define IXP23XX_GPIO_STYLE_SIZE 3 - - -/**************************************************************************** - * Timer. - ****************************************************************************/ -#define IXP23XX_TIMER_REG(x) ((volatile unsigned long *)(IXP23XX_TIMER_VIRT + (x))) -#define IXP23XX_TIMER_CONT IXP23XX_TIMER_REG(0x00) -#define IXP23XX_TIMER1_TIMESTAMP IXP23XX_TIMER_REG(0x04) -#define IXP23XX_TIMER1_RELOAD IXP23XX_TIMER_REG(0x08) -#define IXP23XX_TIMER2_TIMESTAMP IXP23XX_TIMER_REG(0x0c) -#define IXP23XX_TIMER2_RELOAD IXP23XX_TIMER_REG(0x10) -#define IXP23XX_TIMER_WDOG IXP23XX_TIMER_REG(0x14) -#define IXP23XX_TIMER_WDOG_EN IXP23XX_TIMER_REG(0x18) -#define IXP23XX_TIMER_WDOG_KEY IXP23XX_TIMER_REG(0x1c) -#define IXP23XX_TIMER_WDOG_KEY_MAGIC 0x482e -#define IXP23XX_TIMER_STATUS IXP23XX_TIMER_REG(0x20) -#define IXP23XX_TIMER_SOFT_RESET IXP23XX_TIMER_REG(0x24) -#define IXP23XX_TIMER_SOFT_RESET_EN IXP23XX_TIMER_REG(0x28) - -#define IXP23XX_TIMER_ENABLE (1 << 0) -#define IXP23XX_TIMER_ONE_SHOT (1 << 1) -/* Low order bits of reload value ignored */ -#define IXP23XX_TIMER_RELOAD_MASK (0x3) -#define IXP23XX_TIMER_DISABLED (0x0) -#define IXP23XX_TIMER1_INT_PEND (1 << 0) -#define IXP23XX_TIMER2_INT_PEND (1 << 1) -#define IXP23XX_TIMER_STATUS_TS_PEND (1 << 2) -#define IXP23XX_TIMER_STATUS_WDOG_PEND (1 << 3) -#define IXP23XX_TIMER_STATUS_WARM_RESET (1 << 4) - - -/**************************************************************************** - * CAP CSRs. - ****************************************************************************/ -#define IXP23XX_GLOBAL_REG(x) ((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x))) -#define IXP23XX_PRODUCT_ID IXP23XX_GLOBAL_REG(0x00) -#define IXP23XX_MISC_CONTROL IXP23XX_GLOBAL_REG(0x04) -#define IXP23XX_MSF_CLK_CNTRL IXP23XX_GLOBAL_REG(0x08) -#define IXP23XX_RESET0 IXP23XX_GLOBAL_REG(0x0c) -#define IXP23XX_RESET1 IXP23XX_GLOBAL_REG(0x10) -#define IXP23XX_STRAP_OPTIONS IXP23XX_GLOBAL_REG(0x18) - -#define IXP23XX_ENABLE_WATCHDOG (1 << 24) -#define IXP23XX_SHPC_INIT_COMP (1 << 21) -#define IXP23XX_RST_ALL (1 << 16) -#define IXP23XX_RESET_PCI (1 << 2) -#define IXP23XX_PCI_UNIT_RESET (1 << 1) -#define IXP23XX_XSCALE_RESET (1 << 0) - -#define IXP23XX_UENGINE_CSR_VIRT_BASE (IXP23XX_CAP_CSR_VIRT + 0x18000) - - -/**************************************************************************** - * PCI CSRs. - ****************************************************************************/ -#define IXP23XX_PCI_CREG(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + (x))) -#define IXP23XX_PCI_CMDSTAT IXP23XX_PCI_CREG(0x04) -#define IXP23XX_PCI_SRAM_BAR IXP23XX_PCI_CREG(0x14) -#define IXP23XX_PCI_SDRAM_BAR IXP23XX_PCI_CREG(0x18) - - -#define IXP23XX_PCI_CSR(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + 0x01000000 + (x))) -#define IXP23XX_PCI_OUT_INT_STATUS IXP23XX_PCI_CSR(0x0030) -#define IXP23XX_PCI_OUT_INT_MASK IXP23XX_PCI_CSR(0x0034) -#define IXP23XX_PCI_SRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x00fc) -#define IXP23XX_PCI_DRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x0100) -#define IXP23XX_PCI_CONTROL IXP23XX_PCI_CSR(0x013c) -#define IXP23XX_PCI_ADDR_EXT IXP23XX_PCI_CSR(0x0140) -#define IXP23XX_PCI_ME_PUSH_STATUS IXP23XX_PCI_CSR(0x0148) -#define IXP23XX_PCI_ME_PUSH_EN IXP23XX_PCI_CSR(0x014c) -#define IXP23XX_PCI_ERR_STATUS IXP23XX_PCI_CSR(0x0150) -#define IXP23XX_PCI_ERROR_STATUS IXP23XX_PCI_CSR(0x0150) -#define IXP23XX_PCI_ERR_ENABLE IXP23XX_PCI_CSR(0x0154) -#define IXP23XX_PCI_XSCALE_INT_STATUS IXP23XX_PCI_CSR(0x0158) -#define IXP23XX_PCI_XSCALE_INT_ENABLE IXP23XX_PCI_CSR(0x015c) -#define IXP23XX_PCI_CPP_ADDR_BITS IXP23XX_PCI_CSR(0x0160) - - -#endif diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h deleted file mode 100644 index 6cf0704e946a..000000000000 --- a/arch/arm/mach-ixp23xx/include/mach/memory.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/memory.h - * - * Copyright (c) 2003-2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include <mach/hardware.h> - -/* - * Physical DRAM offset. - */ -#define PLAT_PHYS_OFFSET (0x00000000) - -#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0) - -#define __phys_to_bus(x) ((x) + (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET)) -#define __bus_to_phys(x) ((x) - (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET)) - -#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v)) -#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b)) -#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p)) -#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b)) - -#define arch_is_coherent() 1 - -#endif diff --git a/arch/arm/mach-ixp23xx/include/mach/platform.h b/arch/arm/mach-ixp23xx/include/mach/platform.h deleted file mode 100644 index 50de558e722e..000000000000 --- a/arch/arm/mach-ixp23xx/include/mach/platform.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/platform.h - * - * Various bits of code used by platform-level code. - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2005 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASSEMBLY__ - -static inline unsigned long ixp2000_reg_read(volatile void *reg) -{ - return *((volatile unsigned long *)reg); -} - -static inline void ixp2000_reg_write(volatile void *reg, unsigned long val) -{ - *((volatile unsigned long *)reg) = val; -} - -static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val) -{ - *((volatile unsigned long *)reg) = val; -} - -struct pci_sys_data; - -void ixp23xx_map_io(void); -void ixp23xx_init_irq(void); -void ixp23xx_sys_init(void); -void ixp23xx_restart(char, const char *); -int ixp23xx_pci_setup(int, struct pci_sys_data *); -void ixp23xx_pci_preinit(void); -struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*); -void ixp23xx_pci_slave_init(void); - -extern struct sys_timer ixp23xx_timer; - -#define IXP23XX_UART_XTAL 14745600 - -#ifndef __ASSEMBLY__ -/* - * Is system memory on the XSI or CPP bus? - */ -static inline unsigned ixp23xx_cpp_boot(void) -{ - return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES); -} -#endif - - -#endif diff --git a/arch/arm/mach-ixp23xx/include/mach/time.h b/arch/arm/mach-ixp23xx/include/mach/time.h deleted file mode 100644 index b61dafc884ac..000000000000 --- a/arch/arm/mach-ixp23xx/include/mach/time.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/time.h - */ diff --git a/arch/arm/mach-ixp23xx/include/mach/timex.h b/arch/arm/mach-ixp23xx/include/mach/timex.h deleted file mode 100644 index e341e9cf9c37..000000000000 --- a/arch/arm/mach-ixp23xx/include/mach/timex.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/timex.h - * - * XScale architecture timex specifications - */ - -#define CLOCK_TICK_RATE 75000000 diff --git a/arch/arm/mach-ixp23xx/include/mach/uncompress.h b/arch/arm/mach-ixp23xx/include/mach/uncompress.h deleted file mode 100644 index 8b4c358d2c04..000000000000 --- a/arch/arm/mach-ixp23xx/include/mach/uncompress.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/include/mach/uncompress.h - * - * Copyright (C) 2002-2004 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <mach/ixp23xx.h> -#include <linux/serial_reg.h> - -#define UART_BASE ((volatile u32 *)IXP23XX_UART1_PHYS) - -static inline void putc(char c) -{ - int j; - - for (j = 0; j < 0x1000; j++) { - if (UART_BASE[UART_LSR] & UART_LSR_THRE) - break; - barrier(); - } - - UART_BASE[UART_TX] = c; -} - -static inline void flush(void) -{ -} - -#define arch_decomp_setup() -#define arch_decomp_wdog() - - -#endif diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c deleted file mode 100644 index b0e07db5ceaf..000000000000 --- a/arch/arm/mach-ixp23xx/ixdp2351.c +++ /dev/null @@ -1,347 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/ixdp2351.c - * - * IXDP2351 board-specific routines - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2005 (c) MontaVista Software, Inc. - * - * Based on 2.4 code Copyright 2004 (c) Intel Corporation - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/bitops.h> -#include <linux/ioport.h> -#include <linux/serial_8250.h> -#include <linux/serial_core.h> -#include <linux/device.h> -#include <linux/mm.h> -#include <linux/pci.h> -#include <linux/mtd/physmap.h> - -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/tlbflush.h> -#include <asm/pgtable.h> - -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> - -/* - * IXDP2351 Interrupt Handling - */ -static void ixdp2351_inta_mask(struct irq_data *d) -{ - *IXDP2351_CPLD_INTA_MASK_SET_REG = IXDP2351_INTA_IRQ_MASK(d->irq); -} - -static void ixdp2351_inta_unmask(struct irq_data *d) -{ - *IXDP2351_CPLD_INTA_MASK_CLR_REG = IXDP2351_INTA_IRQ_MASK(d->irq); -} - -static void ixdp2351_inta_handler(unsigned int irq, struct irq_desc *desc) -{ - u16 ex_interrupt = - *IXDP2351_CPLD_INTA_STAT_REG & IXDP2351_INTA_IRQ_VALID; - int i; - - desc->irq_data.chip->irq_mask(&desc->irq_data); - - for (i = 0; i < IXDP2351_INTA_IRQ_NUM; i++) { - if (ex_interrupt & (1 << i)) { - int cpld_irq = - IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i); - generic_handle_irq(cpld_irq); - } - } - - desc->irq_data.chip->irq_unmask(&desc->irq_data); -} - -static struct irq_chip ixdp2351_inta_chip = { - .irq_ack = ixdp2351_inta_mask, - .irq_mask = ixdp2351_inta_mask, - .irq_unmask = ixdp2351_inta_unmask -}; - -static void ixdp2351_intb_mask(struct irq_data *d) -{ - *IXDP2351_CPLD_INTB_MASK_SET_REG = IXDP2351_INTB_IRQ_MASK(d->irq); -} - -static void ixdp2351_intb_unmask(struct irq_data *d) -{ - *IXDP2351_CPLD_INTB_MASK_CLR_REG = IXDP2351_INTB_IRQ_MASK(d->irq); -} - -static void ixdp2351_intb_handler(unsigned int irq, struct irq_desc *desc) -{ - u16 ex_interrupt = - *IXDP2351_CPLD_INTB_STAT_REG & IXDP2351_INTB_IRQ_VALID; - int i; - - desc->irq_data.chip->irq_ack(&desc->irq_data); - - for (i = 0; i < IXDP2351_INTB_IRQ_NUM; i++) { - if (ex_interrupt & (1 << i)) { - int cpld_irq = - IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i); - generic_handle_irq(cpld_irq); - } - } - - desc->irq_data.chip->irq_unmask(&desc->irq_data); -} - -static struct irq_chip ixdp2351_intb_chip = { - .irq_ack = ixdp2351_intb_mask, - .irq_mask = ixdp2351_intb_mask, - .irq_unmask = ixdp2351_intb_unmask -}; - -void __init ixdp2351_init_irq(void) -{ - int irq; - - /* Mask all interrupts from CPLD, disable simulation */ - *IXDP2351_CPLD_INTA_MASK_SET_REG = (u16) -1; - *IXDP2351_CPLD_INTB_MASK_SET_REG = (u16) -1; - *IXDP2351_CPLD_INTA_SIM_REG = 0; - *IXDP2351_CPLD_INTB_SIM_REG = 0; - - ixp23xx_init_irq(); - - for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE); - irq < - IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + IXDP2351_INTA_IRQ_NUM); - irq++) { - if (IXDP2351_INTA_IRQ_MASK(irq) & IXDP2351_INTA_IRQ_VALID) { - set_irq_flags(irq, IRQF_VALID); - irq_set_chip_and_handler(irq, &ixdp2351_inta_chip, - handle_level_irq); - } - } - - for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE); - irq < - IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + IXDP2351_INTB_IRQ_NUM); - irq++) { - if (IXDP2351_INTB_IRQ_MASK(irq) & IXDP2351_INTB_IRQ_VALID) { - set_irq_flags(irq, IRQF_VALID); - irq_set_chip_and_handler(irq, &ixdp2351_intb_chip, - handle_level_irq); - } - } - - irq_set_chained_handler(IRQ_IXP23XX_INTA, ixdp2351_inta_handler); - irq_set_chained_handler(IRQ_IXP23XX_INTB, ixdp2351_intb_handler); -} - -/* - * IXDP2351 PCI - */ - -/* - * This board does not do normal PCI IRQ routing, or any - * sort of swizzling, so we just need to check where on the - * bus the device is and figure out what CPLD pin it is - * being routed to. - */ -#define DEVPIN(dev, pin) ((pin) | ((dev) << 3)) - -static int __init ixdp2351_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - u8 bus = dev->bus->number; - u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin); - struct pci_bus *tmp_bus = dev->bus; - - /* Primary bus, no interrupts here */ - if (!bus) - return -1; - - /* Lookup first leaf in bus tree */ - while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL)) - tmp_bus = tmp_bus->parent; - - /* Select between known bridges */ - switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) { - /* Device is located after first bridge */ - case 0x0008: - if (tmp_bus == dev->bus) { - /* Device is located directy after first bridge */ - switch (devpin) { - /* Onboard 82546 */ - case DEVPIN(1, 1): /* Onboard 82546 ch 0 */ - return IRQ_IXDP2351_INTA_82546; - case DEVPIN(1, 2): /* Onboard 82546 ch 1 */ - return IRQ_IXDP2351_INTB_82546; - /* PMC SLOT */ - case DEVPIN(0, 1): /* PMCP INTA# */ - case DEVPIN(2, 4): /* PMCS INTD# */ - return IRQ_IXDP2351_SPCI_PMC_INTA; - case DEVPIN(0, 2): /* PMCP INTB# */ - case DEVPIN(2, 1): /* PMCS INTA# */ - return IRQ_IXDP2351_SPCI_PMC_INTB; - case DEVPIN(0, 3): /* PMCP INTC# */ - case DEVPIN(2, 2): /* PMCS INTB# */ - return IRQ_IXDP2351_SPCI_PMC_INTC; - case DEVPIN(0, 4): /* PMCP INTD# */ - case DEVPIN(2, 3): /* PMCS INTC# */ - return IRQ_IXDP2351_SPCI_PMC_INTD; - } - } else { - /* Device is located indirectly after first bridge */ - /* Not supported now */ - return -1; - } - break; - case 0x0010: - if (tmp_bus == dev->bus) { - /* Device is located directy after second bridge */ - /* Secondary bus of second bridge */ - switch (devpin) { - case DEVPIN(0, 1): /* DB#0 */ - case DEVPIN(0, 2): - case DEVPIN(0, 3): - case DEVPIN(0, 4): - return IRQ_IXDP2351_SPCI_DB_0; - case DEVPIN(1, 1): /* DB#1 */ - case DEVPIN(1, 2): - case DEVPIN(1, 3): - case DEVPIN(1, 4): - return IRQ_IXDP2351_SPCI_DB_1; - case DEVPIN(2, 1): /* FIC1 */ - case DEVPIN(2, 2): - case DEVPIN(2, 3): - case DEVPIN(2, 4): - case DEVPIN(3, 1): /* FIC2 */ - case DEVPIN(3, 2): - case DEVPIN(3, 3): - case DEVPIN(3, 4): - return IRQ_IXDP2351_SPCI_FIC; - } - } else { - /* Device is located indirectly after second bridge */ - /* Not supported now */ - return -1; - } - break; - } - - return -1; -} - -struct hw_pci ixdp2351_pci __initdata = { - .nr_controllers = 1, - .preinit = ixp23xx_pci_preinit, - .setup = ixp23xx_pci_setup, - .scan = ixp23xx_pci_scan_bus, - .map_irq = ixdp2351_map_irq, -}; - -int __init ixdp2351_pci_init(void) -{ - if (machine_is_ixdp2351()) - pci_common_init(&ixdp2351_pci); - - return 0; -} - -subsys_initcall(ixdp2351_pci_init); - -/* - * IXDP2351 Static Mapped I/O - */ -static struct map_desc ixdp2351_io_desc[] __initdata = { - { - .virtual = IXDP2351_NP_VIRT_BASE, - .pfn = __phys_to_pfn((u64)IXDP2351_NP_PHYS_BASE), - .length = IXDP2351_NP_PHYS_SIZE, - .type = MT_DEVICE - }, { - .virtual = IXDP2351_BB_BASE_VIRT, - .pfn = __phys_to_pfn((u64)IXDP2351_BB_BASE_PHYS), - .length = IXDP2351_BB_SIZE, - .type = MT_DEVICE - } -}; - -static void __init ixdp2351_map_io(void) -{ - ixp23xx_map_io(); - iotable_init(ixdp2351_io_desc, ARRAY_SIZE(ixdp2351_io_desc)); -} - -static struct physmap_flash_data ixdp2351_flash_data = { - .width = 1, -}; - -static struct resource ixdp2351_flash_resource = { - .start = 0x90000000, - .end = 0x93ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ixdp2351_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &ixdp2351_flash_data, - }, - .num_resources = 1, - .resource = &ixdp2351_flash_resource, -}; - -static void __init ixdp2351_init(void) -{ - platform_device_register(&ixdp2351_flash); - - /* - * Mark flash as writeable - */ - IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE; - IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE; - IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE; - IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE; - - ixp23xx_sys_init(); -} - -static void ixdp2351_restart(char mode, const char *cmd) -{ - /* First try machine specific support */ - - *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC; - (void) *IXDP2351_CPLD_RESET1_REG; - *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE; - - ixp23xx_restart(mode, cmd); -} - -MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform") - /* Maintainer: MontaVista Software, Inc. */ - .map_io = ixdp2351_map_io, - .init_irq = ixdp2351_init_irq, - .timer = &ixp23xx_timer, - .atag_offset = 0x100, - .init_machine = ixdp2351_init, - .restart = ixdp2351_restart, -MACHINE_END diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c deleted file mode 100644 index 911f5a58e006..000000000000 --- a/arch/arm/mach-ixp23xx/pci.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/pci.c - * - * PCI routines for IXP23XX based systems - * - * Copyright (c) 2005 MontaVista Software, Inc. - * - * based on original code: - * - * Author: Naeem Afzal <naeem.m.afzal@intel.com> - * Copyright 2002-2005 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/sizes.h> -#include <asm/mach/pci.h> -#include <mach/hardware.h> - -extern int (*external_fault) (unsigned long, struct pt_regs *); - -static volatile int pci_master_aborts = 0; - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -int clear_master_aborts(void); - -static u32 -*ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where) -{ - u32 *paddress; - - /* - * Must be dword aligned - */ - where &= ~3; - - /* - * For top bus, generate type 0, else type 1 - */ - if (!bus_nr) { - if (PCI_SLOT(devfn) >= 8) - return 0; - - paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT - | (1 << (PCI_SLOT(devfn) + 16)) - | (PCI_FUNC(devfn) << 8) | where); - } else { - paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT - | (bus_nr << 16) - | (PCI_SLOT(devfn) << 11) - | (PCI_FUNC(devfn) << 8) | where); - } - - return paddress; -} - -/* - * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes. - * 0 and 3 are not valid indexes... - */ -static u32 bytemask[] = { - /*0*/ 0, - /*1*/ 0xff, - /*2*/ 0xffff, - /*3*/ 0, - /*4*/ 0xffffffff, -}; - -static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *value) -{ - u32 n; - u32 *addr; - - n = where % 4; - - DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where, - bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); - - addr = ixp23xx_pci_config_addr(bus->number, devfn, where); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - - pci_master_aborts = 0; - *value = (*addr >> (8*n)) & bytemask[size]; - if (pci_master_aborts) { - pci_master_aborts = 0; - *value = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - return PCIBIOS_SUCCESSFUL; -} - -/* - * We don't do error checking on the address for writes. - * It's assumed that the user checked for the device existing first - * by doing a read first. - */ -static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 value) -{ - u32 mask; - u32 *addr; - u32 temp; - - mask = ~(bytemask[size] << ((where % 0x4) * 8)); - addr = ixp23xx_pci_config_addr(bus->number, devfn, where); - if (!addr) - return PCIBIOS_DEVICE_NOT_FOUND; - temp = (u32) (value) << ((where % 0x4) * 8); - *addr = (*addr & mask) | temp; - - clear_master_aborts(); - - return PCIBIOS_SUCCESSFUL; -} - -struct pci_ops ixp23xx_pci_ops = { - .read = ixp23xx_pci_read_config, - .write = ixp23xx_pci_write_config, -}; - -struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata) -{ - return pci_scan_root_bus(NULL, sysdata->busnr, &ixp23xx_pci_ops, - sysdata, &sysdata->resources); -} - -int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - volatile unsigned long temp; - unsigned long flags; - - pci_master_aborts = 1; - - local_irq_save(flags); - temp = *IXP23XX_PCI_CONTROL; - - /* - * master abort and cmd tgt err - */ - if (temp & ((1 << 8) | (1 << 5))) - *IXP23XX_PCI_CONTROL = temp; - - temp = *IXP23XX_PCI_CMDSTAT; - - if (temp & (1 << 29)) - *IXP23XX_PCI_CMDSTAT = temp; - local_irq_restore(flags); - - /* - * If it was an imprecise abort, then we need to correct the - * return address to be _after_ the instruction. - */ - if (fsr & (1 << 10)) - regs->ARM_pc += 4; - - return 0; -} - -int clear_master_aborts(void) -{ - volatile u32 temp; - - temp = *IXP23XX_PCI_CONTROL; - - /* - * master abort and cmd tgt err - */ - if (temp & ((1 << 8) | (1 << 5))) - *IXP23XX_PCI_CONTROL = temp; - - temp = *IXP23XX_PCI_CMDSTAT; - - if (temp & (1 << 29)) - *IXP23XX_PCI_CMDSTAT = temp; - - return 0; -} - -static void __init ixp23xx_pci_common_init(void) -{ -#ifdef __ARMEB__ - *IXP23XX_PCI_CONTROL |= 0x20000; /* set I/O swapping */ -#endif - /* - * ADDR_31 needs to be clear for PCI memory access to CPP memory - */ - *IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31; - *IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF; - - /* - * Select correct memory for PCI inbound transactions - */ - if (ixp23xx_cpp_boot()) { - *IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1); - } else { - *IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1); - - /* - * Enable coherency on A2 silicon. - */ - if (arch_is_coherent()) - *IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_COH_OFF; - } -} - -void __init ixp23xx_pci_preinit(void) -{ - pcibios_min_io = 0; - pcibios_min_mem = 0xe0000000; - - pci_set_flags(0); - - ixp23xx_pci_common_init(); - - hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, 0, - "PCI config cycle to non-existent device"); - - *IXP23XX_PCI_ADDR_EXT = 0x0000e000; -} - -/* - * Prevent PCI layer from seeing the inbound host-bridge resources - */ -static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev) -{ - int i; - - dev->class &= 0xff; - dev->class |= PCI_CLASS_BRIDGE_HOST << 8; - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - dev->resource[i].start = 0; - dev->resource[i].end = 0; - dev->resource[i].flags = 0; - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx); - -/* - * IXP2300 systems often have large resource requirements, so we just - * use our own resource space. - */ -static struct resource ixp23xx_pci_mem_space = { - .start = IXP23XX_PCI_MEM_START, - .end = IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM, - .name = "PCI Mem Space" -}; - -static struct resource ixp23xx_pci_io_space = { - .start = 0x00000100, - .end = 0x01ffffff, - .flags = IORESOURCE_IO, - .name = "PCI I/O Space" -}; - -int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys) -{ - if (nr >= 1) - return 0; - - pci_add_resource_offset(&sys->resources, - &ixp23xx_pci_io_space, sys->io_offset); - pci_add_resource_offset(&sys->resources, - &ixp23xx_pci_mem_space, sys->mem_offset); - - return 1; -} - -void __init ixp23xx_pci_slave_init(void) -{ - ixp23xx_pci_common_init(); -} diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c deleted file mode 100644 index eaaa3fa9fd05..000000000000 --- a/arch/arm/mach-ixp23xx/roadrunner.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * arch/arm/mach-ixp23xx/roadrunner.c - * - * RoadRunner board-specific routines - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2005 (c) MontaVista Software, Inc. - * - * Based on 2.4 code Copyright 2005 (c) ADI Engineering Corporation - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/bitops.h> -#include <linux/ioport.h> -#include <linux/serial_8250.h> -#include <linux/serial_core.h> -#include <linux/device.h> -#include <linux/mm.h> -#include <linux/pci.h> -#include <linux/mtd/physmap.h> - -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/irq.h> -#include <asm/tlbflush.h> -#include <asm/pgtable.h> - -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> - -/* - * Interrupt mapping - */ -#define INTA IRQ_ROADRUNNER_PCI_INTA -#define INTB IRQ_ROADRUNNER_PCI_INTB -#define INTC IRQ_ROADRUNNER_PCI_INTC -#define INTD IRQ_ROADRUNNER_PCI_INTD - -#define INTC_PIN IXP23XX_GPIO_PIN_11 -#define INTD_PIN IXP23XX_GPIO_PIN_12 - -static int __init roadrunner_map_irq(const struct pci_dev *dev, u8 idsel, - u8 pin) -{ - static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA}; - static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD}; - static int usb_irq[] = {INTB, INTC, INTD, -1}; - static int mini_pci_1_irq[] = {INTB, INTC, -1, -1}; - static int mini_pci_2_irq[] = {INTC, INTD, -1, -1}; - - switch(dev->bus->number) { - case 0: - switch(dev->devfn) { - case 0x0: // PCI-PCI bridge - break; - case 0x8: // PCI Card Slot - return pci_card_slot_irq[pin - 1]; - case 0x10: // PMC Slot - return pmc_card_slot_irq[pin - 1]; - case 0x18: // PMC Slot Secondary Agent - break; - case 0x20: // IXP Processor - break; - default: - return NO_IRQ; - } - break; - - case 1: - switch(dev->devfn) { - case 0x0: // IDE Controller - return (pin == 1) ? INTC : -1; - case 0x8: // USB fun 0 - case 0x9: // USB fun 1 - case 0xa: // USB fun 2 - return usb_irq[pin - 1]; - case 0x10: // Mini PCI 1 - return mini_pci_1_irq[pin-1]; - case 0x18: // Mini PCI 2 - return mini_pci_2_irq[pin-1]; - case 0x20: // MEM slot - return (pin == 1) ? INTA : -1; - default: - return NO_IRQ; - } - break; - - default: - return NO_IRQ; - } - - return NO_IRQ; -} - -static void __init roadrunner_pci_preinit(void) -{ - irq_set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW); - irq_set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW); - - ixp23xx_pci_preinit(); -} - -static struct hw_pci roadrunner_pci __initdata = { - .nr_controllers = 1, - .preinit = roadrunner_pci_preinit, - .setup = ixp23xx_pci_setup, - .scan = ixp23xx_pci_scan_bus, - .map_irq = roadrunner_map_irq, -}; - -static int __init roadrunner_pci_init(void) -{ - if (machine_is_roadrunner()) - pci_common_init(&roadrunner_pci); - - return 0; -}; - -subsys_initcall(roadrunner_pci_init); - -static struct physmap_flash_data roadrunner_flash_data = { - .width = 2, -}; - -static struct resource roadrunner_flash_resource = { - .start = 0x90000000, - .end = 0x93ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device roadrunner_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &roadrunner_flash_data, - }, - .num_resources = 1, - .resource = &roadrunner_flash_resource, -}; - -static void __init roadrunner_init(void) -{ - platform_device_register(&roadrunner_flash); - - /* - * Mark flash as writeable - */ - IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE; - IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE; - IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE; - IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE; - - ixp23xx_sys_init(); -} - -MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform") - /* Maintainer: Deepak Saxena */ - .map_io = ixp23xx_map_io, - .init_irq = ixp23xx_init_irq, - .timer = &ixp23xx_timer, - .atag_offset = 0x100, - .init_machine = roadrunner_init, - .restart = ixp23xx_restart, -MACHINE_END diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index db81ed531031..75b3cfcada6d 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -17,7 +17,6 @@ #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/io.h> diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 7e8909c978c3..fbaa4ed95a3c 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -17,7 +17,6 @@ #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/irq.h> -#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/usb/msm_hsusb.h> diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S index 3ffd8668c9a5..0e05f88abcd5 100644 --- a/arch/arm/mach-msm/include/mach/debug-macro.S +++ b/arch/arm/mach-msm/include/mach/debug-macro.S @@ -30,8 +30,7 @@ @ Write the 1 character to UARTDM_TF str \rd, [\rx, #0x70] #else - teq \rx, #0 - strne \rd, [\rx, #0x0C] + str \rd, [\rx, #0x0C] #endif .endm diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c index bafabb502580..c536fd6bf827 100644 --- a/arch/arm/mach-msm/scm.c +++ b/arch/arm/mach-msm/scm.c @@ -282,6 +282,9 @@ u32 scm_get_version(void) __asmeq("%1", "r1") __asmeq("%2", "r0") __asmeq("%3", "r1") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif "smc #0 @ switch to secure world\n" : "=r" (r0), "=r" (r1) : "r" (r0), "r" (r1) diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 9923f92b5450..398e9e53e189 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -12,6 +12,9 @@ endif obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o +# OCPI interconnect support for 1710, 1610 and 5912 +obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o + # Power Management obj-$(CONFIG_PM) += pm.o sleep.o @@ -28,13 +31,15 @@ usb-fs-$(CONFIG_USB) := usb.o obj-y += $(usb-fs-m) $(usb-fs-y) # Specific board support -obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o board-h2-mmc.o +obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o board-h2-mmc.o \ + board-nand.o obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o -obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o -obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o +obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o board-nand.o +obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o board-nand.o obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o -obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o +obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o \ + board-nand.o obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index fcce7ff37630..31197bd2dedc 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -102,7 +102,7 @@ void __init ams_delta_init_fiq(void) } retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq, - IRQ_TYPE_EDGE_RISING, "deferred_fiq", 0); + IRQ_TYPE_EDGE_RISING, "deferred_fiq", NULL); if (retval < 0) { pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval); release_fiq(&fh); diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 80bd43c7f4ec..4a4afb371022 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -185,20 +185,6 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - unsigned long mask; - - if (cmd == NAND_CMD_NONE) - return; - - mask = (ctrl & NAND_CLE) ? 0x02 : 0; - if (ctrl & NAND_ALE) - mask |= 0x04; - writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); -} - #define FSAMPLE_NAND_RB_GPIO_PIN 62 static int nand_dev_ready(struct mtd_info *mtd) @@ -216,7 +202,7 @@ static struct platform_nand_data nand_data = { .part_probe_types = part_probes, }, .ctrl = { - .cmd_ctrl = nand_cmd_ctl, + .cmd_ctrl = omap1_nand_cmd_ctl, .dev_ready = nand_dev_ready, }, }; diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 553a2e535764..057ec13f0649 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -179,20 +179,6 @@ static struct mtd_partition h2_nand_partitions[] = { }, }; -static void h2_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - unsigned long mask; - - if (cmd == NAND_CMD_NONE) - return; - - mask = (ctrl & NAND_CLE) ? 0x02 : 0; - if (ctrl & NAND_ALE) - mask |= 0x04; - writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); -} - #define H2_NAND_RB_GPIO_PIN 62 static int h2_nand_dev_ready(struct mtd_info *mtd) @@ -212,9 +198,8 @@ static struct platform_nand_data h2_nand_platdata = { .part_probe_types = h2_part_probes, }, .ctrl = { - .cmd_ctrl = h2_nand_cmd_ctl, + .cmd_ctrl = omap1_nand_cmd_ctl, .dev_ready = h2_nand_dev_ready, - }, }; diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 4c19f4c06851..f6ddf8759657 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -181,20 +181,6 @@ static struct mtd_partition nand_partitions[] = { }, }; -static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - unsigned long mask; - - if (cmd == NAND_CMD_NONE) - return; - - mask = (ctrl & NAND_CLE) ? 0x02 : 0; - if (ctrl & NAND_ALE) - mask |= 0x04; - writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); -} - #define H3_NAND_RB_GPIO_PIN 10 static int nand_dev_ready(struct mtd_info *mtd) @@ -214,7 +200,7 @@ static struct platform_nand_data nand_platdata = { .part_probe_types = part_probes, }, .ctrl = { - .cmd_ctrl = nand_cmd_ctl, + .cmd_ctrl = omap1_nand_cmd_ctl, .dev_ready = nand_dev_ready, }, diff --git a/arch/arm/mach-omap1/board-nand.c b/arch/arm/mach-omap1/board-nand.c new file mode 100644 index 000000000000..4d0835327d20 --- /dev/null +++ b/arch/arm/mach-omap1/board-nand.c @@ -0,0 +1,37 @@ +/* + * linux/arch/arm/mach-omap1/board-nand.c + * + * Common OMAP1 board NAND code + * + * Copyright (C) 2004, 2012 Texas Instruments, Inc. + * Copyright (C) 2002 MontaVista Software, Inc. + * Copyright (C) 2001 RidgeRun, Inc. + * Author: RidgeRun, Inc. + * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> + +#include "common.h" + +void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + + writeb(cmd, this->IO_ADDR_W + mask); +} + diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index a2c5abcd7c84..61ed4f0247ce 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -289,10 +289,10 @@ palmz71_gpio_setup(int early) gpio_direction_input(PALMZ71_USBDETECT_GPIO); if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO), palmz71_powercable, IRQF_SAMPLE_RANDOM, - "palmz71-cable", 0)) + "palmz71-cable", NULL)) printk(KERN_ERR "IRQ request for power cable failed!\n"); - palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), 0); + palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), NULL); } } diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 76d4ee05a814..a2c88890e767 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -143,20 +143,6 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - unsigned long mask; - - if (cmd == NAND_CMD_NONE) - return; - - mask = (ctrl & NAND_CLE) ? 0x02 : 0; - if (ctrl & NAND_ALE) - mask |= 0x04; - writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); -} - #define P2_NAND_RB_GPIO_PIN 62 static int nand_dev_ready(struct mtd_info *mtd) @@ -174,7 +160,7 @@ static struct platform_nand_data nand_data = { .part_probe_types = part_probes, }, .ctrl = { - .cmd_ctrl = nand_cmd_ctl, + .cmd_ctrl = omap1_nand_cmd_ctl, .dev_ready = nand_dev_ready, }, }; diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 67382ddd8c83..a9ee06b6cb42 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -194,9 +194,8 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate) { /* Find the highest supported frequency <= rate and switch to it */ struct mpu_rate * ptr; - unsigned long dpll1_rate, ref_rate; + unsigned long ref_rate; - dpll1_rate = ck_dpll1_p->rate; ref_rate = ck_ref_p->rate; for (ptr = omap1_rate_table; ptr->rate; ptr++) { diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index af658ad338ec..bb7779b57795 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -27,6 +27,7 @@ #define __ARCH_ARM_MACH_OMAP1_COMMON_H #include <plat/common.h> +#include <linux/mtd/mtd.h> #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) void omap7xx_map_io(void); @@ -56,8 +57,20 @@ void omap1_init_early(void); void omap1_init_irq(void); void omap1_restart(char, const char *); +extern void __init omap_check_revision(void); + +extern void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd, + unsigned int ctrl); + extern struct sys_timer omap1_timer; extern bool omap_32k_timer_init(void); -extern void __init omap_init_consistent_dma_size(void); + +extern u32 omap_irq_flags; + +#ifdef CONFIG_ARCH_OMAP16XX +extern int ocpi_enable(void); +#else +static inline int ocpi_enable(void) { return 0; } +#endif #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */ diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 76c67b3f9f61..29ec50fc688d 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -87,7 +87,7 @@ static void fpga_mask_ack_irq(struct irq_data *d) fpga_ack_irq(d); } -void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc) +static void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc) { u32 stat; int fpga_irq; diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c index 2b28e1da14b0..a1b846aacdaf 100644 --- a/arch/arm/mach-omap1/id.c +++ b/arch/arm/mach-omap1/id.c @@ -21,6 +21,8 @@ #include <mach/hardware.h> +#include "common.h" + #define OMAP_DIE_ID_0 0xfffe1800 #define OMAP_DIE_ID_1 0xfffe1804 #define OMAP_PRODUCTION_ID_0 0xfffe2000 diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index d969a7203d14..71ce017bf5d8 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -18,13 +18,12 @@ #include <plat/mux.h> #include <plat/tc.h> +#include <plat/dma.h> #include "iomap.h" #include "common.h" #include "clock.h" -extern void omap_check_revision(void); - /* * The machine specific code may provide the extra mapping besides the * default mapping provided here. diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 4448114fab72..6995fb6a3345 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -49,6 +49,8 @@ #include <mach/hardware.h> +#include "common.h" + #define IRQ_BANK(irq) ((irq) >> 5) #define IRQ_BIT(irq) ((irq) & 0x1f) diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index 86ace9aaa663..5769c71815b2 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -57,7 +57,7 @@ static struct lcd_dma_info { void *cb_data; int active; - unsigned long addr, size; + unsigned long addr; int rotate, data_type, xres, yres; int vxres; int mirror; @@ -77,11 +77,6 @@ void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, } EXPORT_SYMBOL(omap_set_lcd_dma_b1); -void omap_set_lcd_dma_src_port(int port) -{ - lcd_dma.src_port = port; -} - void omap_set_lcd_dma_ext_controller(int external) { lcd_dma.ext_ctrl = external; diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/mach-omap1/ocpi.c index ebe0c73c8901..238170cab5b7 100644 --- a/arch/arm/plat-omap/ocpi.c +++ b/arch/arm/mach-omap1/ocpi.c @@ -4,6 +4,7 @@ * Minimal OCP bus support for omap16xx * * Copyright (C) 2003 - 2005 Nokia Corporation + * Copyright (C) 2012 Texas Instruments, Inc. * Written by Tony Lindgren <tony@atomide.com> * * Modified for clock framework by Paul Mundt <paul.mundt@nokia.com>. @@ -35,6 +36,8 @@ #include <mach/hardware.h> +#include "common.h" + #define OCPI_BASE 0xfffec320 #define OCPI_FAULT (OCPI_BASE + 0x00) #define OCPI_CMD_FAULT (OCPI_BASE + 0x04) @@ -64,7 +67,7 @@ int ocpi_enable(void) /* Enable access for OHCI in OCPI */ val = omap_readl(OCPI_PROT); val &= ~0xff; - //val &= (1 << 0); /* Allow access only to EMIFS */ + /* val &= (1 << 0); Allow access only to EMIFS */ omap_writel(val, OCPI_PROT); val = omap_readl(OCPI_SEC); @@ -86,7 +89,7 @@ static int __init omap_ocpi_init(void) clk_enable(ocpi_ck); ocpi_enable(); - printk("OMAP OCPI interconnect driver loaded\n"); + pr_info("OMAP OCPI interconnect driver loaded\n"); return 0; } diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index f66c32912b22..b2560d32b3a0 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -569,11 +569,10 @@ static int omap_pm_read_proc( static void omap_pm_init_proc(void) { - struct proc_dir_entry *entry; - - entry = create_proc_read_entry("driver/omap_pm", - S_IWUSR | S_IRUGO, NULL, - omap_pm_read_proc, NULL); + /* XXX Appears to leak memory */ + create_proc_read_entry("driver/omap_pm", + S_IWUSR | S_IRUGO, NULL, + omap_pm_read_proc, NULL); } #endif /* DEBUG && CONFIG_PROC_FS */ diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c index f255b153b863..b17709103866 100644 --- a/arch/arm/mach-omap1/reset.c +++ b/arch/arm/mach-omap1/reset.c @@ -8,6 +8,8 @@ #include <mach/hardware.h> +#include "common.h" + void omap1_restart(char mode, const char *cmd) { /* diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index fb202af01d0d..64c65bcb2d67 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -54,8 +54,7 @@ static int omap1_dm_timer_set_src(struct platform_device *pdev, return 0; } - -int __init omap1_dm_timer_init(void) +static int __init omap1_dm_timer_init(void) { int i; int ret; diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 19de03b074e3..e61afd922766 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -29,6 +29,8 @@ #include <plat/mux.h> #include <plat/usb.h> +#include "common.h" + /* These routines should handle the standard chip-specific modes * for usb0/1/2 ports, covering basic mux and transceiver setup. * @@ -138,6 +140,7 @@ static inline void ohci_device_init(struct omap_usb_config *pdata) if (cpu_is_omap7xx()) ohci_resources[1].start = INT_7XX_USB_HHC_1; pdata->ohci_device = &ohci_device; + pdata->ocpi_enable = &ocpi_enable; } #else diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c index 1f97e7475206..447682c4e11c 100644 --- a/arch/arm/mach-omap2/am35xx-emac.c +++ b/arch/arm/mach-omap2/am35xx-emac.c @@ -39,26 +39,23 @@ static struct platform_device am35xx_emac_mdio_device = { static void am35xx_enable_emac_int(void) { - u32 regval; - - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | - AM35XX_CPGMAC_C0_TX_PULSE_CLR | - AM35XX_CPGMAC_C0_MISC_PULSE_CLR | - AM35XX_CPGMAC_C0_RX_THRESH_CLR); - omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + u32 v; + + v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR | + AM35XX_CPGMAC_C0_MISC_PULSE_CLR | AM35XX_CPGMAC_C0_RX_THRESH_CLR); + omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR); + omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */ } static void am35xx_disable_emac_int(void) { - u32 regval; + u32 v; - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | - AM35XX_CPGMAC_C0_TX_PULSE_CLR); - omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR); + omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR); + omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */ } static struct emac_platform_data am35xx_emac_pdata = { @@ -92,7 +89,7 @@ static struct platform_device am35xx_emac_device = { void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) { - unsigned int regval; + u32 v; int err; am35xx_emac_pdata.rmii_en = rmii_en; @@ -110,8 +107,8 @@ void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) return; } - regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); - regval = regval & (~(AM35XX_CPGMACSS_SW_RST)); - omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET); - regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); + v = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); + v &= ~AM35XX_CPGMACSS_SW_RST; + omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET); + omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */ } diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index da75f239873e..37abb0d49b51 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -37,7 +37,7 @@ #include <plat/dma.h> #include <plat/gpmc.h> #include <video/omapdss.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/gpmc-smc91x.h> @@ -113,9 +113,6 @@ static struct gpio sdp3430_dss_gpios[] __initdata = { {SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"}, }; -static int lcd_enabled; -static int dvi_enabled; - static void __init sdp3430_display_init(void) { int r; @@ -129,44 +126,18 @@ static void __init sdp3430_display_init(void) static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) { - if (dvi_enabled) { - printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); - return -EINVAL; - } - gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1); gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1); - lcd_enabled = 1; - return 0; } static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev) { - lcd_enabled = 0; - gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0); gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0); } -static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - - dvi_enabled = 1; - - return 0; -} - -static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev) -{ - dvi_enabled = 0; -} - static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev) { return 0; @@ -186,15 +157,14 @@ static struct omap_dss_device sdp3430_lcd_device = { .platform_disable = sdp3430_panel_disable_lcd, }; -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = sdp3430_panel_enable_dvi, - .platform_disable = sdp3430_panel_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = -1, }; static struct omap_dss_device sdp3430_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 130ab00c09a2..b4ad706c145a 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -666,6 +666,10 @@ static struct nokia_dsi_panel_data dsi1_panel = { .use_ext_te = false, .ext_te_gpio = 101, .esd_interval = 0, + .pin_config = { + .num_pins = 6, + .pins = { 0, 1, 2, 3, 4, 5 }, + }, }; static struct omap_dss_device sdp4430_lcd_device = { @@ -674,13 +678,6 @@ static struct omap_dss_device sdp4430_lcd_device = { .type = OMAP_DISPLAY_TYPE_DSI, .data = &dsi1_panel, .phy.dsi = { - .clk_lane = 1, - .clk_pol = 0, - .data1_lane = 2, - .data1_pol = 0, - .data2_lane = 3, - .data2_pol = 0, - .module = 0, }, @@ -715,6 +712,10 @@ static struct nokia_dsi_panel_data dsi2_panel = { .use_ext_te = false, .ext_te_gpio = 103, .esd_interval = 0, + .pin_config = { + .num_pins = 6, + .pins = { 0, 1, 2, 3, 4, 5 }, + }, }; static struct omap_dss_device sdp4430_lcd2_device = { @@ -723,12 +724,6 @@ static struct omap_dss_device sdp4430_lcd2_device = { .type = OMAP_DISPLAY_TYPE_DSI, .data = &dsi2_panel, .phy.dsi = { - .clk_lane = 1, - .clk_pol = 0, - .data1_lane = 2, - .data1_pol = 0, - .data2_lane = 3, - .data2_pol = 0, .module = 1, }, @@ -758,21 +753,6 @@ static struct omap_dss_device sdp4430_lcd2_device = { .channel = OMAP_DSS_CHANNEL_LCD2, }; -static void sdp4430_lcd_init(void) -{ - int r; - - r = gpio_request_one(dsi1_panel.reset_gpio, GPIOF_DIR_OUT, - "lcd1_reset_gpio"); - if (r) - pr_err("%s: Could not get lcd1_reset_gpio\n", __func__); - - r = gpio_request_one(dsi2_panel.reset_gpio, GPIOF_DIR_OUT, - "lcd2_reset_gpio"); - if (r) - pr_err("%s: Could not get lcd2_reset_gpio\n", __func__); -} - static struct omap_dss_hdmi_data sdp4430_hdmi_data = { .hpd_gpio = HDMI_GPIO_HPD, }; @@ -858,7 +838,6 @@ static void __init omap_4430sdp_display_init(void) if (r) pr_err("%s: Could not get display_sel GPIO\n", __func__); - sdp4430_lcd_init(); sdp4430_picodlp_init(); omap_display_init(&sdp4430_dss_data); /* diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 3645285a3e2b..99790eb646e8 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -37,7 +37,7 @@ #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include "am35xx-emac.h" #include "mux.h" @@ -207,31 +207,14 @@ static struct omap_dss_device am3517_evm_tv_device = { .platform_disable = am3517_evm_panel_disable_tv, }; -static int am3517_evm_panel_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - dvi_enabled = 1; - - return 0; -} - -static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev) -{ - dvi_enabled = 0; -} - -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = am3517_evm_panel_enable_dvi, - .platform_disable = am3517_evm_panel_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = -1, }; static struct omap_dss_device am3517_evm_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 909a8b91b564..45746cb56c68 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -44,7 +44,7 @@ #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/mcspi.h> #include <mach/hardware.h> @@ -218,25 +218,6 @@ static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev) gpio_set_value(CM_T35_LCD_EN_GPIO, 0); } -static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - - gpio_set_value(CM_T35_DVI_EN_GPIO, 0); - dvi_enabled = 1; - - return 0; -} - -static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev) -{ - gpio_set_value(CM_T35_DVI_EN_GPIO, 1); - dvi_enabled = 0; -} - static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev) { return 0; @@ -260,15 +241,14 @@ static struct omap_dss_device cm_t35_lcd_device = { .phy.dpi.data_lines = 18, }; -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = cm_t35_panel_enable_dvi, - .platform_disable = cm_t35_panel_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = CM_T35_DVI_EN_GPIO, }; static struct omap_dss_device cm_t35_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; @@ -316,7 +296,6 @@ static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = { static struct gpio cm_t35_dss_gpios[] __initdata = { { CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable" }, { CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW, "lcd bl enable" }, - { CM_T35_DVI_EN_GPIO, GPIOF_OUT_INIT_HIGH, "dvi enable" }, }; static void __init cm_t35_init_display(void) @@ -335,7 +314,6 @@ static void __init cm_t35_init_display(void) gpio_export(CM_T35_LCD_EN_GPIO, 0); gpio_export(CM_T35_LCD_BL_GPIO, 0); - gpio_export(CM_T35_DVI_EN_GPIO, 0); msleep(50); gpio_set_value(CM_T35_LCD_EN_GPIO, 1); diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index a2010f07de31..b063f0d2faa6 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -47,7 +47,7 @@ #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/mcspi.h> #include <linux/input/matrix_keypad.h> @@ -118,19 +118,6 @@ static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev) gpio_set_value_cansleep(dssdev->reset_gpio, 0); } -static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value_cansleep(dssdev->reset_gpio, 1); - return 0; -} - -static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value_cansleep(dssdev->reset_gpio, 0); -} - static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; @@ -154,15 +141,14 @@ static struct omap_dss_device devkit8000_lcd_device = { .phy.dpi.data_lines = 24, }; -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = devkit8000_panel_enable_dvi, - .platform_disable = devkit8000_panel_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = -1, }; static struct omap_dss_device devkit8000_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; @@ -244,13 +230,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev, } /* gpio + 7 is "DVI_PD" (out, active low) */ - devkit8000_dvi_device.reset_gpio = gpio + 7; - ret = gpio_request_one(devkit8000_dvi_device.reset_gpio, - GPIOF_OUT_INIT_LOW, "DVI PowerDown"); - if (ret < 0) { - devkit8000_dvi_device.reset_gpio = -EINVAL; - printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n"); - } + dvi_panel.power_down_gpio = gpio + 7; return 0; } diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 930c0d380435..04816c96e829 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -32,7 +32,7 @@ #include <plat/gpmc.h> #include <plat/usb.h> #include <video/omapdss.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/onenand.h> #include "mux.h" @@ -444,28 +444,15 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { .setup = igep_twl_gpio_setup, }; -static int igep2_enable_dvi(struct omap_dss_device *dssdev) -{ - gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1); - - return 0; -} - -static void igep2_disable_dvi(struct omap_dss_device *dssdev) -{ - gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0); -} - -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = igep2_enable_dvi, - .platform_disable = igep2_disable_dvi, - .i2c_bus_num = 3, +static struct tfp410_platform_data dvi_panel = { + .i2c_bus_num = 3, + .power_down_gpio = IGEP2_GPIO_DVI_PUP, }; static struct omap_dss_device igep2_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; @@ -480,14 +467,6 @@ static struct omap_dss_board_info igep2_dss_data = { .default_device = &igep2_dvi_device, }; -static void __init igep2_display_init(void) -{ - int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH, - "GPIO_DVI_PUP"); - if (err) - pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n"); -} - static struct platform_device *igep_devices[] __initdata = { &igep_vwlan_device, }; @@ -668,7 +647,6 @@ static void __init igep_init(void) if (machine_is_igep0020()) { omap_display_init(&igep2_dss_data); - igep2_display_init(); igep2_init_smsc911x(); usbhs_init(&igep2_usbhs_bdata); } else { diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 7be8d659d91d..8ede8d20d7b2 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -42,7 +42,7 @@ #include <plat/board.h> #include "common.h" #include <video/omapdss.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/usb.h> @@ -189,33 +189,17 @@ static struct mtd_partition omap3beagle_nand_partitions[] = { /* DSS */ -static int beagle_enable_dvi(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value(dssdev->reset_gpio, 1); - - return 0; -} - -static void beagle_disable_dvi(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value(dssdev->reset_gpio, 0); -} - -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = beagle_enable_dvi, - .platform_disable = beagle_disable_dvi, +static struct tfp410_platform_data dvi_panel = { .i2c_bus_num = 3, + .power_down_gpio = -1, }; static struct omap_dss_device beagle_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, - .reset_gpio = -EINVAL, }; static struct omap_dss_device beagle_tv_device = { @@ -236,16 +220,6 @@ static struct omap_dss_board_info beagle_dss_data = { .default_device = &beagle_dvi_device, }; -static void __init beagle_display_init(void) -{ - int r; - - r = gpio_request_one(beagle_dvi_device.reset_gpio, GPIOF_OUT_INIT_LOW, - "DVI reset"); - if (r < 0) - printk(KERN_ERR "Unable to get DVI reset GPIO\n"); -} - #include "sdram-micron-mt46h32m32lf-6.h" static struct omap2_hsmmc_info mmc[] = { @@ -309,7 +283,7 @@ static int beagle_twl_gpio_setup(struct device *dev, if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) pr_err("%s: unable to configure EHCI_nOC\n", __func__); } - beagle_dvi_device.reset_gpio = beagle_config.reset_gpio; + dvi_panel.power_down_gpio = beagle_config.reset_gpio; gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, "nEN_USB_PWR"); @@ -552,7 +526,6 @@ static void __init omap3_beagle_init(void) omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - beagle_display_init(); beagle_opp_init(); } diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 49df12735b41..ace3c675e9c2 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -46,7 +46,7 @@ #include "common.h" #include <plat/mcspi.h> #include <video/omapdss.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" @@ -219,35 +219,14 @@ static struct omap_dss_device omap3_evm_tv_device = { .platform_disable = omap3_evm_disable_tv, }; -static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - - gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 1); - - dvi_enabled = 1; - return 0; -} - -static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev) -{ - gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 0); - - dvi_enabled = 0; -} - -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = omap3_evm_enable_dvi, - .platform_disable = omap3_evm_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = OMAP3EVM_DVI_PANEL_EN_GPIO, }; static struct omap_dss_device omap3_evm_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; @@ -630,13 +609,13 @@ static struct regulator_consumer_supply dummy_supplies[] = { static void __init omap3_evm_init(void) { + struct omap_board_mux *obm; + omap3_evm_get_revision(); regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - if (cpu_is_omap3630()) - omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB); - else - omap3_mux_init(omap35x_board_mux, OMAP_PACKAGE_CBB); + obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux; + omap3_mux_init(obm, OMAP_PACKAGE_CBB); omap_board_config = omap3_evm_config; omap_board_config_size = ARRAY_SIZE(omap3_evm_config); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 4dffc95bddd2..4396bae91677 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -42,7 +42,7 @@ #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/mcspi.h> #include <linux/input/matrix_keypad.h> @@ -92,9 +92,6 @@ static inline void __init omap3stalker_init_eth(void) #define LCD_PANEL_BKLIGHT_GPIO 210 #define ENABLE_VPLL2_DEV_GRP 0xE0 -static int lcd_enabled; -static int dvi_enabled; - static void __init omap3_stalker_display_init(void) { return; @@ -122,32 +119,14 @@ static struct omap_dss_device omap3_stalker_tv_device = { .platform_disable = omap3_stalker_disable_tv, }; -static int omap3_stalker_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - gpio_set_value(DSS_ENABLE_GPIO, 1); - dvi_enabled = 1; - return 0; -} - -static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev) -{ - gpio_set_value(DSS_ENABLE_GPIO, 0); - dvi_enabled = 0; -} - -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = omap3_stalker_enable_dvi, - .platform_disable = omap3_stalker_disable_dvi, +static struct tfp410_platform_data dvi_panel = { + .power_down_gpio = DSS_ENABLE_GPIO, }; static struct omap_dss_device omap3_stalker_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 1b782ba53433..59dd8b7f5b4f 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -42,7 +42,7 @@ #include "common.h" #include <plat/usb.h> #include <plat/mmc.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include "hsmmc.h" #include "control.h" @@ -231,7 +231,7 @@ static struct platform_device omap_vwlan_device = { }, }; -struct wl12xx_platform_data omap_panda_wlan_data __initdata = { +static struct wl12xx_platform_data omap_panda_wlan_data __initdata = { /* PANDA ref clock is 38.4 MHz */ .board_ref_clock = 2, }; @@ -420,47 +420,22 @@ static struct omap_board_mux board_mux[] __initdata = { /* Display DVI */ #define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0 -static int omap4_panda_enable_dvi(struct omap_dss_device *dssdev) -{ - gpio_set_value(dssdev->reset_gpio, 1); - return 0; -} - -static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev) -{ - gpio_set_value(dssdev->reset_gpio, 0); -} - /* Using generic display panel */ -static struct panel_dvi_platform_data omap4_dvi_panel = { - .platform_enable = omap4_panda_enable_dvi, - .platform_disable = omap4_panda_disable_dvi, - .i2c_bus_num = 3, +static struct tfp410_platform_data omap4_dvi_panel = { + .i2c_bus_num = 3, + .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, }; -struct omap_dss_device omap4_panda_dvi_device = { +static struct omap_dss_device omap4_panda_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "dvi", + .driver_name = "tfp410", .data = &omap4_dvi_panel, .phy.dpi.data_lines = 24, .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, .channel = OMAP_DSS_CHANNEL_LCD2, }; -int __init omap4_panda_dvi_init(void) -{ - int r; - - /* Requesting TFP410 DVI GPIO and disabling it, at bootup */ - r = gpio_request_one(omap4_panda_dvi_device.reset_gpio, - GPIOF_OUT_INIT_LOW, "DVI PD"); - if (r) - pr_err("Failed to get DVI powerdown GPIO\n"); - - return r; -} - static struct gpio panda_hdmi_gpios[] = { { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, @@ -509,13 +484,8 @@ static struct omap_dss_board_info omap4_panda_dss_data = { .default_device = &omap4_panda_dvi_device, }; -void __init omap4_panda_display_init(void) +static void __init omap4_panda_display_init(void) { - int r; - - r = omap4_panda_dvi_init(); - if (r) - pr_err("error initializing panda DVI\n"); omap_display_init(&omap4_panda_dss_data); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 33aa3910b09e..5527c1979a16 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -46,7 +46,7 @@ #include "common.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> #include <plat/gpmc.h> #include <mach/hardware.h> #include <plat/nand.h> @@ -167,32 +167,15 @@ static void __init overo_display_init(void) gpio_export(OVERO_GPIO_LCD_BL, 0); } -static int overo_panel_enable_dvi(struct omap_dss_device *dssdev) -{ - if (lcd_enabled) { - printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); - return -EINVAL; - } - dvi_enabled = 1; - - return 0; -} - -static void overo_panel_disable_dvi(struct omap_dss_device *dssdev) -{ - dvi_enabled = 0; -} - -static struct panel_dvi_platform_data dvi_panel = { - .platform_enable = overo_panel_enable_dvi, - .platform_disable = overo_panel_disable_dvi, +static struct tfp410_platform_data dvi_panel = { .i2c_bus_num = 3, + .power_down_gpio = -1, }; static struct omap_dss_device overo_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "dvi", + .driver_name = "tfp410", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index d87ee0612098..ae957c92081b 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -872,11 +872,11 @@ static struct twl4030_power_data rx51_t2scripts_data __initdata = { .resource_config = twl4030_rconfig, }; -struct twl4030_vibra_data rx51_vibra_data __initdata = { +static struct twl4030_vibra_data rx51_vibra_data __initdata = { .coexist = 0, }; -struct twl4030_audio_data rx51_audio_data __initdata = { +static struct twl4030_audio_data rx51_audio_data __initdata = { .audio_mclk = 26000000, .vibra = &rx51_vibra_data, }; diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 27f01f051dff..2da92a6ba40a 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -59,25 +59,24 @@ static struct platform_device leds_gpio = { }; /* - * cpuidle C-states definition override from the default values. - * The 'exit_latency' field is the sum of sleep and wake-up latencies. - */ -static struct cpuidle_params rx51_cpuidle_params[] = { - /* C1 */ - {110 + 162, 5 , 1}, - /* C2 */ - {106 + 180, 309, 1}, - /* C3 */ - {107 + 410, 46057, 0}, - /* C4 */ - {121 + 3374, 46057, 0}, - /* C5 */ - {855 + 1146, 46057, 1}, - /* C6 */ - {7580 + 4134, 484329, 0}, - /* C7 */ - {7505 + 15274, 484329, 1}, -}; + * cpuidle C-states definition for rx51. + * + * The 'exit_latency' field is the sum of sleep + * and wake-up latencies. + + --------------------------------------------- + | state | exit_latency | target_residency | + --------------------------------------------- + | C1 | 110 + 162 | 5 | + | C2 | 106 + 180 | 309 | + | C3 | 107 + 410 | 46057 | + | C4 | 121 + 3374 | 46057 | + | C5 | 855 + 1146 | 46057 | + | C6 | 7580 + 4134 | 484329 | + | C7 | 7505 + 15274 | 484329 | + --------------------------------------------- + +*/ extern void __init rx51_peripherals_init(void); @@ -98,7 +97,6 @@ static void __init rx51_init(void) struct omap_sdrc_params *sdrc_params; omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap3_pm_init_cpuidle(rx51_cpuidle_params); omap_serial_init(); sdrc_params = nokia_get_sdram_timings(); diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index a43a765dd092..28187f134fff 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -16,6 +16,7 @@ #include <linux/spi/spi.h> #include <plat/mcspi.h> #include <video/omapdss.h> +#include <mach/board-zoom.h> #define LCD_PANEL_RESET_GPIO_PROD 96 #define LCD_PANEL_RESET_GPIO_PILOT 55 diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 57da7f406e28..0e95efccd2d7 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -134,8 +134,6 @@ void omap4_map_io(void); void ti81xx_map_io(void); void omap_barriers_init(void); -extern void __init omap_init_consistent_dma_size(void); - /** * omap_test_timeout - busy-loop, testing a condition * @cond: condition to test until it evaluates to true diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 535866489ce3..207bc1c7759f 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -38,40 +38,44 @@ #ifdef CONFIG_CPU_IDLE -/* - * The latencies/thresholds for various C states have - * to be configured from the respective board files. - * These are some default values (which might not provide - * the best power savings) used on boards which do not - * pass these details from the board file. - */ -static struct cpuidle_params cpuidle_params_table[] = { - /* C1 */ - {2 + 2, 5, 1}, - /* C2 */ - {10 + 10, 30, 1}, - /* C3 */ - {50 + 50, 300, 1}, - /* C4 */ - {1500 + 1800, 4000, 1}, - /* C5 */ - {2500 + 7500, 12000, 1}, - /* C6 */ - {3000 + 8500, 15000, 1}, - /* C7 */ - {10000 + 30000, 300000, 1}, -}; -#define OMAP3_NUM_STATES ARRAY_SIZE(cpuidle_params_table) - /* Mach specific information to be recorded in the C-state driver_data */ struct omap3_idle_statedata { u32 mpu_state; u32 core_state; - u8 valid; }; -struct omap3_idle_statedata omap3_idle_data[OMAP3_NUM_STATES]; -struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd; +static struct omap3_idle_statedata omap3_idle_data[] = { + { + .mpu_state = PWRDM_POWER_ON, + .core_state = PWRDM_POWER_ON, + }, + { + .mpu_state = PWRDM_POWER_ON, + .core_state = PWRDM_POWER_ON, + }, + { + .mpu_state = PWRDM_POWER_RET, + .core_state = PWRDM_POWER_ON, + }, + { + .mpu_state = PWRDM_POWER_OFF, + .core_state = PWRDM_POWER_ON, + }, + { + .mpu_state = PWRDM_POWER_RET, + .core_state = PWRDM_POWER_RET, + }, + { + .mpu_state = PWRDM_POWER_OFF, + .core_state = PWRDM_POWER_RET, + }, + { + .mpu_state = PWRDM_POWER_OFF, + .core_state = PWRDM_POWER_OFF, + }, +}; + +static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd; static int _cpuidle_allow_idle(struct powerdomain *pwrdm, struct clockdomain *clkdm) @@ -91,8 +95,7 @@ static int __omap3_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct omap3_idle_statedata *cx = - cpuidle_get_statedata(&dev->states_usage[index]); + struct omap3_idle_statedata *cx = &omap3_idle_data[index]; u32 mpu_state = cx->mpu_state, core_state = cx->core_state; local_fiq_disable(); @@ -169,14 +172,12 @@ static inline int omap3_enter_idle(struct cpuidle_device *dev, * if it satisfies the enable_off_mode condition. */ static int next_valid_state(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) + struct cpuidle_driver *drv, int index) { - struct cpuidle_state_usage *curr_usage = &dev->states_usage[index]; - struct cpuidle_state *curr = &drv->states[index]; - struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr_usage); + struct omap3_idle_statedata *cx = &omap3_idle_data[index]; u32 mpu_deepest_state = PWRDM_POWER_RET; u32 core_deepest_state = PWRDM_POWER_RET; + int idx; int next_index = -1; if (enable_off_mode) { @@ -191,45 +192,29 @@ static int next_valid_state(struct cpuidle_device *dev, } /* Check if current state is valid */ - if ((cx->valid) && - (cx->mpu_state >= mpu_deepest_state) && - (cx->core_state >= core_deepest_state)) { + if ((cx->mpu_state >= mpu_deepest_state) && + (cx->core_state >= core_deepest_state)) return index; - } else { - int idx = OMAP3_NUM_STATES - 1; - - /* Reach the current state starting at highest C-state */ - for (; idx >= 0; idx--) { - if (&drv->states[idx] == curr) { - next_index = idx; - break; - } - } - - /* Should never hit this condition */ - WARN_ON(next_index == -1); - /* - * Drop to next valid state. - * Start search from the next (lower) state. - */ - idx--; - for (; idx >= 0; idx--) { - cx = cpuidle_get_statedata(&dev->states_usage[idx]); - if ((cx->valid) && - (cx->mpu_state >= mpu_deepest_state) && - (cx->core_state >= core_deepest_state)) { - next_index = idx; - break; - } + /* + * Drop to next valid state. + * Start search from the next (lower) state. + */ + for (idx = index - 1; idx >= 0; idx--) { + cx = &omap3_idle_data[idx]; + if ((cx->mpu_state >= mpu_deepest_state) && + (cx->core_state >= core_deepest_state)) { + next_index = idx; + break; } - /* - * C1 is always valid. - * So, no need to check for 'next_index == -1' outside - * this loop. - */ } + /* + * C1 is always valid. + * So, no need to check for 'next_index == -1' outside + * this loop. + */ + return next_index; } @@ -273,7 +258,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, * Prevent PER off if CORE is not in retention or off as this * would disable PER wakeups completely. */ - cx = cpuidle_get_statedata(&dev->states_usage[index]); + cx = &omap3_idle_data[index]; core_next_state = cx->core_state; per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd); if ((per_next_state == PWRDM_POWER_OFF) && @@ -298,57 +283,71 @@ select_state: DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); -void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params) -{ - int i; - - if (!cpuidle_board_params) - return; - - for (i = 0; i < OMAP3_NUM_STATES; i++) { - cpuidle_params_table[i].valid = cpuidle_board_params[i].valid; - cpuidle_params_table[i].exit_latency = - cpuidle_board_params[i].exit_latency; - cpuidle_params_table[i].target_residency = - cpuidle_board_params[i].target_residency; - } - return; -} - struct cpuidle_driver omap3_idle_driver = { .name = "omap3_idle", .owner = THIS_MODULE, + .states = { + { + .enter = omap3_enter_idle, + .exit_latency = 2 + 2, + .target_residency = 5, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "C1", + .desc = "MPU ON + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 10 + 10, + .target_residency = 30, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "C2", + .desc = "MPU ON + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 50 + 50, + .target_residency = 300, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "C3", + .desc = "MPU RET + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 1500 + 1800, + .target_residency = 4000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "C4", + .desc = "MPU OFF + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 2500 + 7500, + .target_residency = 12000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "C5", + .desc = "MPU RET + CORE RET", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 3000 + 8500, + .target_residency = 15000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "C6", + .desc = "MPU OFF + CORE RET", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 10000 + 30000, + .target_residency = 30000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "C7", + .desc = "MPU OFF + CORE OFF", + }, + }, + .state_count = ARRAY_SIZE(omap3_idle_data), + .safe_state_index = 0, }; -/* Helper to fill the C-state common data*/ -static inline void _fill_cstate(struct cpuidle_driver *drv, - int idx, const char *descr) -{ - struct cpuidle_state *state = &drv->states[idx]; - - state->exit_latency = cpuidle_params_table[idx].exit_latency; - state->target_residency = cpuidle_params_table[idx].target_residency; - state->flags = CPUIDLE_FLAG_TIME_VALID; - state->enter = omap3_enter_idle_bm; - sprintf(state->name, "C%d", idx + 1); - strncpy(state->desc, descr, CPUIDLE_DESC_LEN); - -} - -/* Helper to register the driver_data */ -static inline struct omap3_idle_statedata *_fill_cstate_usage( - struct cpuidle_device *dev, - int idx) -{ - struct omap3_idle_statedata *cx = &omap3_idle_data[idx]; - struct cpuidle_state_usage *state_usage = &dev->states_usage[idx]; - - cx->valid = cpuidle_params_table[idx].valid; - cpuidle_set_statedata(state_usage, cx); - - return cx; -} - /** * omap3_idle_init - Init routine for OMAP3 idle * @@ -358,77 +357,20 @@ static inline struct omap3_idle_statedata *_fill_cstate_usage( int __init omap3_idle_init(void) { struct cpuidle_device *dev; - struct cpuidle_driver *drv = &omap3_idle_driver; - struct omap3_idle_statedata *cx; mpu_pd = pwrdm_lookup("mpu_pwrdm"); core_pd = pwrdm_lookup("core_pwrdm"); per_pd = pwrdm_lookup("per_pwrdm"); cam_pd = pwrdm_lookup("cam_pwrdm"); + if (!mpu_pd || !core_pd || !per_pd || !cam_pd) + return -ENODEV; - drv->safe_state_index = -1; - dev = &per_cpu(omap3_idle_dev, smp_processor_id()); - - /* C1 . MPU WFI + Core active */ - _fill_cstate(drv, 0, "MPU ON + CORE ON"); - (&drv->states[0])->enter = omap3_enter_idle; - drv->safe_state_index = 0; - cx = _fill_cstate_usage(dev, 0); - cx->valid = 1; /* C1 is always valid */ - cx->mpu_state = PWRDM_POWER_ON; - cx->core_state = PWRDM_POWER_ON; - - /* C2 . MPU WFI + Core inactive */ - _fill_cstate(drv, 1, "MPU ON + CORE ON"); - cx = _fill_cstate_usage(dev, 1); - cx->mpu_state = PWRDM_POWER_ON; - cx->core_state = PWRDM_POWER_ON; - - /* C3 . MPU CSWR + Core inactive */ - _fill_cstate(drv, 2, "MPU RET + CORE ON"); - cx = _fill_cstate_usage(dev, 2); - cx->mpu_state = PWRDM_POWER_RET; - cx->core_state = PWRDM_POWER_ON; - - /* C4 . MPU OFF + Core inactive */ - _fill_cstate(drv, 3, "MPU OFF + CORE ON"); - cx = _fill_cstate_usage(dev, 3); - cx->mpu_state = PWRDM_POWER_OFF; - cx->core_state = PWRDM_POWER_ON; - - /* C5 . MPU RET + Core RET */ - _fill_cstate(drv, 4, "MPU RET + CORE RET"); - cx = _fill_cstate_usage(dev, 4); - cx->mpu_state = PWRDM_POWER_RET; - cx->core_state = PWRDM_POWER_RET; - - /* C6 . MPU OFF + Core RET */ - _fill_cstate(drv, 5, "MPU OFF + CORE RET"); - cx = _fill_cstate_usage(dev, 5); - cx->mpu_state = PWRDM_POWER_OFF; - cx->core_state = PWRDM_POWER_RET; - - /* C7 . MPU OFF + Core OFF */ - _fill_cstate(drv, 6, "MPU OFF + CORE OFF"); - cx = _fill_cstate_usage(dev, 6); - /* - * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot - * enable OFF mode in a stable form for previous revisions. - * We disable C7 state as a result. - */ - if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) { - cx->valid = 0; - pr_warn("%s: core off state C7 disabled due to i583\n", - __func__); - } - cx->mpu_state = PWRDM_POWER_OFF; - cx->core_state = PWRDM_POWER_OFF; - - drv->state_count = OMAP3_NUM_STATES; cpuidle_register_driver(&omap3_idle_driver); - dev->state_count = OMAP3_NUM_STATES; + dev = &per_cpu(omap3_idle_dev, smp_processor_id()); + dev->cpu = 0; + if (cpuidle_register_device(dev)) { printk(KERN_ERR "%s: CPUidle register device failed\n", __func__); diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index f386cbe9c889..be1617ca84bd 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -24,26 +24,31 @@ #ifdef CONFIG_CPU_IDLE -/* Machine specific information to be recorded in the C-state driver_data */ +/* Machine specific information */ struct omap4_idle_statedata { u32 cpu_state; u32 mpu_logic_state; u32 mpu_state; - u8 valid; }; -static struct cpuidle_params cpuidle_params_table[] = { - /* C1 - CPU0 ON + CPU1 ON + MPU ON */ - {.exit_latency = 2 + 2 , .target_residency = 5, .valid = 1}, - /* C2- CPU0 OFF + CPU1 OFF + MPU CSWR */ - {.exit_latency = 328 + 440 , .target_residency = 960, .valid = 1}, - /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */ - {.exit_latency = 460 + 518 , .target_residency = 1100, .valid = 1}, +static struct omap4_idle_statedata omap4_idle_data[] = { + { + .cpu_state = PWRDM_POWER_ON, + .mpu_state = PWRDM_POWER_ON, + .mpu_logic_state = PWRDM_POWER_RET, + }, + { + .cpu_state = PWRDM_POWER_OFF, + .mpu_state = PWRDM_POWER_RET, + .mpu_logic_state = PWRDM_POWER_RET, + }, + { + .cpu_state = PWRDM_POWER_OFF, + .mpu_state = PWRDM_POWER_RET, + .mpu_logic_state = PWRDM_POWER_OFF, + }, }; -#define OMAP4_NUM_STATES ARRAY_SIZE(cpuidle_params_table) - -struct omap4_idle_statedata omap4_idle_data[OMAP4_NUM_STATES]; static struct powerdomain *mpu_pd, *cpu0_pd, *cpu1_pd; /** @@ -60,8 +65,7 @@ static int omap4_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - struct omap4_idle_statedata *cx = - cpuidle_get_statedata(&dev->states_usage[index]); + struct omap4_idle_statedata *cx = &omap4_idle_data[index]; u32 cpu1_state; int cpu_id = smp_processor_id(); @@ -78,7 +82,7 @@ static int omap4_enter_idle(struct cpuidle_device *dev, cpu1_state = pwrdm_read_pwrst(cpu1_pd); if (cpu1_state != PWRDM_POWER_OFF) { index = drv->safe_state_index; - cx = cpuidle_get_statedata(&dev->states_usage[index]); + cx = &omap4_idle_data[index]; } if (index > 0) @@ -133,36 +137,39 @@ struct cpuidle_driver omap4_idle_driver = { .name = "omap4_idle", .owner = THIS_MODULE, .en_core_tk_irqen = 1, + .states = { + { + /* C1 - CPU0 ON + CPU1 ON + MPU ON */ + .exit_latency = 2 + 2, + .target_residency = 5, + .flags = CPUIDLE_FLAG_TIME_VALID, + .enter = omap4_enter_idle, + .name = "C1", + .desc = "MPUSS ON" + }, + { + /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */ + .exit_latency = 328 + 440, + .target_residency = 960, + .flags = CPUIDLE_FLAG_TIME_VALID, + .enter = omap4_enter_idle, + .name = "C2", + .desc = "MPUSS CSWR", + }, + { + /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */ + .exit_latency = 460 + 518, + .target_residency = 1100, + .flags = CPUIDLE_FLAG_TIME_VALID, + .enter = omap4_enter_idle, + .name = "C3", + .desc = "MPUSS OSWR", + }, + }, + .state_count = ARRAY_SIZE(omap4_idle_data), + .safe_state_index = 0, }; -static inline void _fill_cstate(struct cpuidle_driver *drv, - int idx, const char *descr) -{ - struct cpuidle_state *state = &drv->states[idx]; - - state->exit_latency = cpuidle_params_table[idx].exit_latency; - state->target_residency = cpuidle_params_table[idx].target_residency; - state->flags = CPUIDLE_FLAG_TIME_VALID; - state->enter = omap4_enter_idle; - sprintf(state->name, "C%d", idx + 1); - strncpy(state->desc, descr, CPUIDLE_DESC_LEN); -} - -static inline struct omap4_idle_statedata *_fill_cstate_usage( - struct cpuidle_device *dev, - int idx) -{ - struct omap4_idle_statedata *cx = &omap4_idle_data[idx]; - struct cpuidle_state_usage *state_usage = &dev->states_usage[idx]; - - cx->valid = cpuidle_params_table[idx].valid; - cpuidle_set_statedata(state_usage, cx); - - return cx; -} - - - /** * omap4_idle_init - Init routine for OMAP4 idle * @@ -171,9 +178,7 @@ static inline struct omap4_idle_statedata *_fill_cstate_usage( */ int __init omap4_idle_init(void) { - struct omap4_idle_statedata *cx; struct cpuidle_device *dev; - struct cpuidle_driver *drv = &omap4_idle_driver; unsigned int cpu_id = 0; mpu_pd = pwrdm_lookup("mpu_pwrdm"); @@ -182,42 +187,15 @@ int __init omap4_idle_init(void) if ((!mpu_pd) || (!cpu0_pd) || (!cpu1_pd)) return -ENODEV; - - drv->safe_state_index = -1; dev = &per_cpu(omap4_idle_dev, cpu_id); dev->cpu = cpu_id; - /* C1 - CPU0 ON + CPU1 ON + MPU ON */ - _fill_cstate(drv, 0, "MPUSS ON"); - drv->safe_state_index = 0; - cx = _fill_cstate_usage(dev, 0); - cx->valid = 1; /* C1 is always valid */ - cx->cpu_state = PWRDM_POWER_ON; - cx->mpu_state = PWRDM_POWER_ON; - cx->mpu_logic_state = PWRDM_POWER_RET; - - /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */ - _fill_cstate(drv, 1, "MPUSS CSWR"); - cx = _fill_cstate_usage(dev, 1); - cx->cpu_state = PWRDM_POWER_OFF; - cx->mpu_state = PWRDM_POWER_RET; - cx->mpu_logic_state = PWRDM_POWER_RET; - - /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */ - _fill_cstate(drv, 2, "MPUSS OSWR"); - cx = _fill_cstate_usage(dev, 2); - cx->cpu_state = PWRDM_POWER_OFF; - cx->mpu_state = PWRDM_POWER_RET; - cx->mpu_logic_state = PWRDM_POWER_OFF; - - drv->state_count = OMAP4_NUM_STATES; cpuidle_register_driver(&omap4_idle_driver); - dev->state_count = OMAP4_NUM_STATES; if (cpuidle_register_device(dev)) { pr_err("%s: CPUidle register device failed\n", __func__); - return -EIO; - } + return -EIO; + } return 0; } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index e4336035c0ea..f3953a499286 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -42,7 +42,6 @@ static int __init omap3_l3_init(void) { - int l; struct omap_hwmod *oh; struct platform_device *pdev; char oh_name[L3_MODULES_MAX_LEN]; @@ -54,7 +53,7 @@ static int __init omap3_l3_init(void) if (!(cpu_is_omap34xx())) return -ENODEV; - l = snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main"); + snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main"); oh = omap_hwmod_lookup(oh_name); @@ -72,7 +71,7 @@ postcore_initcall(omap3_l3_init); static int __init omap4_l3_init(void) { - int l, i; + int i; struct omap_hwmod *oh[3]; struct platform_device *pdev; char oh_name[L3_MODULES_MAX_LEN]; @@ -89,7 +88,7 @@ static int __init omap4_l3_init(void) return -ENODEV; for (i = 0; i < L3_MODULES; i++) { - l = snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1); + snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1); oh[i] = omap_hwmod_lookup(oh_name); if (!(oh[i])) diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 2f994e5194e8..064cab03d2bd 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -58,7 +58,7 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1); pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL); - if (!pdata) { + if (!pdata->regs) { pr_err("gpio%d: Memory allocation failed\n", id); return -ENOMEM; } diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 385b3e02c4a6..a0fa9bb2bda5 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -176,7 +176,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, const int t_wpl = 40; const int t_wph = 30; int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; - int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency; + int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency; int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0; int err, ticks_cez; int cs = cfg->cs, freq = *freq_ptr; @@ -240,7 +240,6 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, break; } - tick_ns = gpmc_ticks_to_ns(1); div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period); gpmc_clk_ns = gpmc_ticks_to_ns(div); if (gpmc_clk_ns < 15) /* >66Mhz */ diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 00d510858e28..580e684e8825 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -755,8 +755,7 @@ static int __init gpmc_init(void) irq++; } - ret = request_irq(gpmc_irq, - gpmc_handle_irq, IRQF_SHARED, "gpmc", gpmc_base); + ret = request_irq(gpmc_irq, gpmc_handle_irq, IRQF_SHARED, "gpmc", NULL); if (ret) pr_err("gpmc: irq-%d could not claim: err %d\n", gpmc_irq, ret); diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c index 454dfce125ca..8763c8520dc2 100644 --- a/arch/arm/mach-omap2/hwspinlock.c +++ b/arch/arm/mach-omap2/hwspinlock.c @@ -28,7 +28,7 @@ static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = { .base_id = 0, }; -int __init hwspinlocks_init(void) +static int __init hwspinlocks_init(void) { int retval = 0; struct omap_hwmod *oh; diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 065bd768987c..2d5a57669a79 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -31,6 +31,7 @@ #include <plat/omap-pm.h> #include <plat/omap_hwmod.h> #include <plat/multi.h> +#include <plat/dma.h> #include "iomap.h" #include "voltage.h" diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 65f0d2571c9a..80f3ced0bd1a 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -25,6 +25,7 @@ #include <mach/hardware.h> #include "iomap.h" +#include "common.h" /* selected INTC register offsets */ @@ -334,7 +335,7 @@ void omap_intc_restore_context(void) void omap3_intc_suspend(void) { /* A pending interrupt would prevent OMAP from entering suspend */ - omap_ack_irq(0); + omap_ack_irq(NULL); } void omap3_intc_prepare_idle(void) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 65c33911341f..3268ee24eada 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -247,7 +247,7 @@ int __init omap_mux_init_signal(const char *muxname, int val) int mux_mode; mux_mode = omap_mux_get_by_name(muxname, &partition, &mux); - if (mux_mode < 0) + if (mux_mode < 0 || !mux) return mux_mode; old_mode = omap_mux_read(partition, mux->reg_offset); diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index d8f8ef40290f..d9ae4a53d818 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -18,6 +18,7 @@ #include <asm/cacheflush.h> #include <asm/memblock.h> +#include <plat/omap-secure.h> #include <mach/omap-secure.h> static phys_addr_t omap_secure_memblock_base; diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 42cd7fb52414..d811c7790350 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -259,7 +259,7 @@ static void irq_save_context(void) /* * Clear WakeupGen SAR backup status. */ -void irq_sar_clear(void) +static void irq_sar_clear(void) { u32 val; val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 7144ae651d3d..bf86f7e8f91f 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2,7 +2,7 @@ * omap_hwmod implementation for OMAP2/3/4 * * Copyright (C) 2009-2011 Nokia Corporation - * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011-2012 Texas Instruments, Inc. * * Paul Walmsley, Benoît Cousson, Kevin Hilman * @@ -137,6 +137,7 @@ #include <linux/mutex.h> #include <linux/spinlock.h> #include <linux/slab.h> +#include <linux/bootmem.h> #include "common.h" #include <plat/cpu.h> @@ -159,16 +160,58 @@ /* Name of the OMAP hwmod for the MPU */ #define MPU_INITIATOR_NAME "mpu" +/* + * Number of struct omap_hwmod_link records per struct + * omap_hwmod_ocp_if record (master->slave and slave->master) + */ +#define LINKS_PER_OCP_IF 2 + /* omap_hwmod_list contains all registered struct omap_hwmods */ static LIST_HEAD(omap_hwmod_list); /* mpu_oh: used to add/remove MPU initiator from sleepdep list */ static struct omap_hwmod *mpu_oh; +/* + * linkspace: ptr to a buffer that struct omap_hwmod_link records are + * allocated from - used to reduce the number of small memory + * allocations, which has a significant impact on performance + */ +static struct omap_hwmod_link *linkspace; + +/* + * free_ls, max_ls: array indexes into linkspace; representing the + * next free struct omap_hwmod_link index, and the maximum number of + * struct omap_hwmod_link records allocated (respectively) + */ +static unsigned short free_ls, max_ls, ls_supp; /* Private functions */ /** + * _fetch_next_ocp_if - return the next OCP interface in a list + * @p: ptr to a ptr to the list_head inside the ocp_if to return + * @i: pointer to the index of the element pointed to by @p in the list + * + * Return a pointer to the struct omap_hwmod_ocp_if record + * containing the struct list_head pointed to by @p, and increment + * @p such that a future call to this routine will return the next + * record. + */ +static struct omap_hwmod_ocp_if *_fetch_next_ocp_if(struct list_head **p, + int *i) +{ + struct omap_hwmod_ocp_if *oi; + + oi = list_entry(*p, struct omap_hwmod_link, node)->ocp_if; + *p = (*p)->next; + + *i = *i + 1; + + return oi; +} + +/** * _update_sysc_cache - return the module OCP_SYSCONFIG register, keep copy * @oh: struct omap_hwmod * * @@ -582,16 +625,16 @@ static int _init_main_clk(struct omap_hwmod *oh) */ static int _init_interface_clks(struct omap_hwmod *oh) { + struct omap_hwmod_ocp_if *os; + struct list_head *p; struct clk *c; - int i; + int i = 0; int ret = 0; - if (oh->slaves_cnt == 0) - return 0; - - for (i = 0; i < oh->slaves_cnt; i++) { - struct omap_hwmod_ocp_if *os = oh->slaves[i]; + p = oh->slave_ports.next; + while (i < oh->slaves_cnt) { + os = _fetch_next_ocp_if(&p, &i); if (!os->clk) continue; @@ -643,21 +686,22 @@ static int _init_opt_clks(struct omap_hwmod *oh) */ static int _enable_clocks(struct omap_hwmod *oh) { - int i; + struct omap_hwmod_ocp_if *os; + struct list_head *p; + int i = 0; pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name); if (oh->_clk) clk_enable(oh->_clk); - if (oh->slaves_cnt > 0) { - for (i = 0; i < oh->slaves_cnt; i++) { - struct omap_hwmod_ocp_if *os = oh->slaves[i]; - struct clk *c = os->_clk; + p = oh->slave_ports.next; - if (c && (os->flags & OCPIF_SWSUP_IDLE)) - clk_enable(c); - } + while (i < oh->slaves_cnt) { + os = _fetch_next_ocp_if(&p, &i); + + if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE)) + clk_enable(os->_clk); } /* The opt clocks are controlled by the device driver. */ @@ -673,21 +717,22 @@ static int _enable_clocks(struct omap_hwmod *oh) */ static int _disable_clocks(struct omap_hwmod *oh) { - int i; + struct omap_hwmod_ocp_if *os; + struct list_head *p; + int i = 0; pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name); if (oh->_clk) clk_disable(oh->_clk); - if (oh->slaves_cnt > 0) { - for (i = 0; i < oh->slaves_cnt; i++) { - struct omap_hwmod_ocp_if *os = oh->slaves[i]; - struct clk *c = os->_clk; + p = oh->slave_ports.next; - if (c && (os->flags & OCPIF_SWSUP_IDLE)) - clk_disable(c); - } + while (i < oh->slaves_cnt) { + os = _fetch_next_ocp_if(&p, &i); + + if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE)) + clk_disable(os->_clk); } /* The opt clocks are controlled by the device driver. */ @@ -781,39 +826,6 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh) } /** - * _omap4_disable_module - enable CLKCTRL modulemode on OMAP4 - * @oh: struct omap_hwmod * - * - * Disable the PRCM module mode related to the hwmod @oh. - * Return EINVAL if the modulemode is not supported and 0 in case of success. - */ -static int _omap4_disable_module(struct omap_hwmod *oh) -{ - int v; - - /* The module mode does not exist prior OMAP4 */ - if (!cpu_is_omap44xx()) - return -EINVAL; - - if (!oh->clkdm || !oh->prcm.omap4.modulemode) - return -EINVAL; - - pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__); - - omap4_cminst_module_disable(oh->clkdm->prcm_partition, - oh->clkdm->cm_inst, - oh->clkdm->clkdm_offs, - oh->prcm.omap4.clkctrl_offs); - - v = _omap4_wait_target_disable(oh); - if (v) - pr_warn("omap_hwmod: %s: _wait_target_disable failed\n", - oh->name); - - return 0; -} - -/** * _count_mpu_irqs - count the number of MPU IRQ lines associated with @oh * @oh: struct omap_hwmod *oh * @@ -883,59 +895,220 @@ static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os) } /** - * _find_mpu_port_index - find hwmod OCP slave port ID intended for MPU use - * @oh: struct omap_hwmod * + * _get_mpu_irq_by_name - fetch MPU interrupt line number by name + * @oh: struct omap_hwmod * to operate on + * @name: pointer to the name of the MPU interrupt number to fetch (optional) + * @irq: pointer to an unsigned int to store the MPU IRQ number to * - * Returns the array index of the OCP slave port that the MPU - * addresses the device on, or -EINVAL upon error or not found. + * Retrieve a MPU hardware IRQ line number named by @name associated + * with the IP block pointed to by @oh. The IRQ number will be filled + * into the address pointed to by @dma. When @name is non-null, the + * IRQ line number associated with the named entry will be returned. + * If @name is null, the first matching entry will be returned. Data + * order is not meaningful in hwmod data, so callers are strongly + * encouraged to use a non-null @name whenever possible to avoid + * unpredictable effects if hwmod data is later added that causes data + * ordering to change. Returns 0 upon success or a negative error + * code upon error. */ -static int __init _find_mpu_port_index(struct omap_hwmod *oh) +static int _get_mpu_irq_by_name(struct omap_hwmod *oh, const char *name, + unsigned int *irq) { int i; - int found = 0; + bool found = false; - if (!oh || oh->slaves_cnt == 0) - return -EINVAL; + if (!oh->mpu_irqs) + return -ENOENT; - for (i = 0; i < oh->slaves_cnt; i++) { - struct omap_hwmod_ocp_if *os = oh->slaves[i]; + i = 0; + while (oh->mpu_irqs[i].irq != -1) { + if (name == oh->mpu_irqs[i].name || + !strcmp(name, oh->mpu_irqs[i].name)) { + found = true; + break; + } + i++; + } - if (os->user & OCP_USER_MPU) { - found = 1; + if (!found) + return -ENOENT; + + *irq = oh->mpu_irqs[i].irq; + + return 0; +} + +/** + * _get_sdma_req_by_name - fetch SDMA request line ID by name + * @oh: struct omap_hwmod * to operate on + * @name: pointer to the name of the SDMA request line to fetch (optional) + * @dma: pointer to an unsigned int to store the request line ID to + * + * Retrieve an SDMA request line ID named by @name on the IP block + * pointed to by @oh. The ID will be filled into the address pointed + * to by @dma. When @name is non-null, the request line ID associated + * with the named entry will be returned. If @name is null, the first + * matching entry will be returned. Data order is not meaningful in + * hwmod data, so callers are strongly encouraged to use a non-null + * @name whenever possible to avoid unpredictable effects if hwmod + * data is later added that causes data ordering to change. Returns 0 + * upon success or a negative error code upon error. + */ +static int _get_sdma_req_by_name(struct omap_hwmod *oh, const char *name, + unsigned int *dma) +{ + int i; + bool found = false; + + if (!oh->sdma_reqs) + return -ENOENT; + + i = 0; + while (oh->sdma_reqs[i].dma_req != -1) { + if (name == oh->sdma_reqs[i].name || + !strcmp(name, oh->sdma_reqs[i].name)) { + found = true; break; } + i++; } - if (found) - pr_debug("omap_hwmod: %s: MPU OCP slave port ID %d\n", - oh->name, i); - else - pr_debug("omap_hwmod: %s: no MPU OCP slave port found\n", - oh->name); + if (!found) + return -ENOENT; + + *dma = oh->sdma_reqs[i].dma_req; - return (found) ? i : -EINVAL; + return 0; } /** - * _find_mpu_rt_base - find hwmod register target base addr accessible by MPU - * @oh: struct omap_hwmod * + * _get_addr_space_by_name - fetch address space start & end by name + * @oh: struct omap_hwmod * to operate on + * @name: pointer to the name of the address space to fetch (optional) + * @pa_start: pointer to a u32 to store the starting address to + * @pa_end: pointer to a u32 to store the ending address to * - * Return the virtual address of the base of the register target of - * device @oh, or NULL on error. + * Retrieve address space start and end addresses for the IP block + * pointed to by @oh. The data will be filled into the addresses + * pointed to by @pa_start and @pa_end. When @name is non-null, the + * address space data associated with the named entry will be + * returned. If @name is null, the first matching entry will be + * returned. Data order is not meaningful in hwmod data, so callers + * are strongly encouraged to use a non-null @name whenever possible + * to avoid unpredictable effects if hwmod data is later added that + * causes data ordering to change. Returns 0 upon success or a + * negative error code upon error. */ -static void __iomem * __init _find_mpu_rt_base(struct omap_hwmod *oh, u8 index) +static int _get_addr_space_by_name(struct omap_hwmod *oh, const char *name, + u32 *pa_start, u32 *pa_end) { + int i, j; struct omap_hwmod_ocp_if *os; - struct omap_hwmod_addr_space *mem; - int i = 0, found = 0; - void __iomem *va_start; + struct list_head *p = NULL; + bool found = false; + + p = oh->slave_ports.next; + + i = 0; + while (i < oh->slaves_cnt) { + os = _fetch_next_ocp_if(&p, &i); + + if (!os->addr) + return -ENOENT; + + j = 0; + while (os->addr[j].pa_start != os->addr[j].pa_end) { + if (name == os->addr[j].name || + !strcmp(name, os->addr[j].name)) { + found = true; + break; + } + j++; + } + + if (found) + break; + } + + if (!found) + return -ENOENT; + + *pa_start = os->addr[j].pa_start; + *pa_end = os->addr[j].pa_end; + + return 0; +} + +/** + * _save_mpu_port_index - find and save the index to @oh's MPU port + * @oh: struct omap_hwmod * + * + * Determines the array index of the OCP slave port that the MPU uses + * to address the device, and saves it into the struct omap_hwmod. + * Intended to be called during hwmod registration only. No return + * value. + */ +static void __init _save_mpu_port_index(struct omap_hwmod *oh) +{ + struct omap_hwmod_ocp_if *os = NULL; + struct list_head *p; + int i = 0; + + if (!oh) + return; - if (!oh || oh->slaves_cnt == 0) + oh->_int_flags |= _HWMOD_NO_MPU_PORT; + + p = oh->slave_ports.next; + + while (i < oh->slaves_cnt) { + os = _fetch_next_ocp_if(&p, &i); + if (os->user & OCP_USER_MPU) { + oh->_mpu_port = os; + oh->_int_flags &= ~_HWMOD_NO_MPU_PORT; + break; + } + } + + return; +} + +/** + * _find_mpu_rt_port - return omap_hwmod_ocp_if accessible by the MPU + * @oh: struct omap_hwmod * + * + * Given a pointer to a struct omap_hwmod record @oh, return a pointer + * to the struct omap_hwmod_ocp_if record that is used by the MPU to + * communicate with the IP block. This interface need not be directly + * connected to the MPU (and almost certainly is not), but is directly + * connected to the IP block represented by @oh. Returns a pointer + * to the struct omap_hwmod_ocp_if * upon success, or returns NULL upon + * error or if there does not appear to be a path from the MPU to this + * IP block. + */ +static struct omap_hwmod_ocp_if *_find_mpu_rt_port(struct omap_hwmod *oh) +{ + if (!oh || oh->_int_flags & _HWMOD_NO_MPU_PORT || oh->slaves_cnt == 0) return NULL; - os = oh->slaves[index]; + return oh->_mpu_port; +}; + +/** + * _find_mpu_rt_addr_space - return MPU register target address space for @oh + * @oh: struct omap_hwmod * + * + * Returns a pointer to the struct omap_hwmod_addr_space record representing + * the register target MPU address space; or returns NULL upon error. + */ +static struct omap_hwmod_addr_space * __init _find_mpu_rt_addr_space(struct omap_hwmod *oh) +{ + struct omap_hwmod_ocp_if *os; + struct omap_hwmod_addr_space *mem; + int found = 0, i = 0; - if (!os->addr) + os = _find_mpu_rt_port(oh); + if (!os || !os->addr) return NULL; do { @@ -944,20 +1117,7 @@ static void __iomem * __init _find_mpu_rt_base(struct omap_hwmod *oh, u8 index) found = 1; } while (!found && mem->pa_start != mem->pa_end); - if (found) { - va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); - if (!va_start) { - pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name); - return NULL; - } - pr_debug("omap_hwmod: %s: MPU register target at va %p\n", - oh->name, va_start); - } else { - pr_debug("omap_hwmod: %s: no MPU register target found\n", - oh->name); - } - - return (found) ? va_start : NULL; + return (found) ? mem : NULL; } /** @@ -1205,12 +1365,11 @@ static int _wait_target_ready(struct omap_hwmod *oh) if (!oh) return -EINVAL; - if (oh->_int_flags & _HWMOD_NO_MPU_PORT) + if (oh->flags & HWMOD_NO_IDLEST) return 0; - os = oh->slaves[oh->_mpu_port_index]; - - if (oh->flags & HWMOD_NO_IDLEST) + os = _find_mpu_rt_port(oh); + if (!os) return 0; /* XXX check module SIDLEMODE */ @@ -1378,13 +1537,73 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name) } /** + * _are_any_hardreset_lines_asserted - return true if part of @oh is hard-reset + * @oh: struct omap_hwmod * + * + * If any hardreset line associated with @oh is asserted, then return true. + * Otherwise, if @oh has no hardreset lines associated with it, or if + * no hardreset lines associated with @oh are asserted, then return false. + * This function is used to avoid executing some parts of the IP block + * enable/disable sequence if a hardreset line is set. + */ +static bool _are_any_hardreset_lines_asserted(struct omap_hwmod *oh) +{ + int i; + + if (oh->rst_lines_cnt == 0) + return false; + + for (i = 0; i < oh->rst_lines_cnt; i++) + if (_read_hardreset(oh, oh->rst_lines[i].name) > 0) + return true; + + return false; +} + +/** + * _omap4_disable_module - enable CLKCTRL modulemode on OMAP4 + * @oh: struct omap_hwmod * + * + * Disable the PRCM module mode related to the hwmod @oh. + * Return EINVAL if the modulemode is not supported and 0 in case of success. + */ +static int _omap4_disable_module(struct omap_hwmod *oh) +{ + int v; + + /* The module mode does not exist prior OMAP4 */ + if (!cpu_is_omap44xx()) + return -EINVAL; + + if (!oh->clkdm || !oh->prcm.omap4.modulemode) + return -EINVAL; + + pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__); + + omap4_cminst_module_disable(oh->clkdm->prcm_partition, + oh->clkdm->cm_inst, + oh->clkdm->clkdm_offs, + oh->prcm.omap4.clkctrl_offs); + + if (_are_any_hardreset_lines_asserted(oh)) + return 0; + + v = _omap4_wait_target_disable(oh); + if (v) + pr_warn("omap_hwmod: %s: _wait_target_disable failed\n", + oh->name); + + return 0; +} + +/** * _ocp_softreset - reset an omap_hwmod via the OCP_SYSCONFIG bit * @oh: struct omap_hwmod * * * Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit. hwmod must be - * enabled for this to work. Returns -EINVAL if the hwmod cannot be - * reset this way or if the hwmod is in the wrong state, -ETIMEDOUT if - * the module did not reset in time, or 0 upon success. + * enabled for this to work. Returns -ENOENT if the hwmod cannot be + * reset this way, -EINVAL if the hwmod is in the wrong state, + * -ETIMEDOUT if the module did not reset in time, or 0 upon success. * * In OMAP3 a specific SYSSTATUS register is used to get the reset status. * Starting in OMAP4, some IPs do not have SYSSTATUS registers and instead @@ -1401,7 +1620,7 @@ static int _ocp_softreset(struct omap_hwmod *oh) if (!oh->class->sysc || !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET)) - return -EINVAL; + return -ENOENT; /* clocks must be on for this operation */ if (oh->_state != _HWMOD_STATE_ENABLED) { @@ -1462,32 +1681,60 @@ dis_opt_clks: * _reset - reset an omap_hwmod * @oh: struct omap_hwmod * * - * Resets an omap_hwmod @oh. The default software reset mechanism for - * most OMAP IP blocks is triggered via the OCP_SYSCONFIG.SOFTRESET - * bit. However, some hwmods cannot be reset via this method: some - * are not targets and therefore have no OCP header registers to - * access; others (like the IVA) have idiosyncratic reset sequences. - * So for these relatively rare cases, custom reset code can be - * supplied in the struct omap_hwmod_class .reset function pointer. - * Passes along the return value from either _reset() or the custom - * reset function - these must return -EINVAL if the hwmod cannot be - * reset this way or if the hwmod is in the wrong state, -ETIMEDOUT if - * the module did not reset in time, or 0 upon success. + * Resets an omap_hwmod @oh. If the module has a custom reset + * function pointer defined, then call it to reset the IP block, and + * pass along its return value to the caller. Otherwise, if the IP + * block has an OCP_SYSCONFIG register with a SOFTRESET bitfield + * associated with it, call a function to reset the IP block via that + * method, and pass along the return value to the caller. Finally, if + * the IP block has some hardreset lines associated with it, assert + * all of those, but do _not_ deassert them. (This is because driver + * authors have expressed an apparent requirement to control the + * deassertion of the hardreset lines themselves.) + * + * The default software reset mechanism for most OMAP IP blocks is + * triggered via the OCP_SYSCONFIG.SOFTRESET bit. However, some + * hwmods cannot be reset via this method. Some are not targets and + * therefore have no OCP header registers to access. Others (like the + * IVA) have idiosyncratic reset sequences. So for these relatively + * rare cases, custom reset code can be supplied in the struct + * omap_hwmod_class .reset function pointer. Passes along the return + * value from either _ocp_softreset() or the custom reset function - + * these must return -EINVAL if the hwmod cannot be reset this way or + * if the hwmod is in the wrong state, -ETIMEDOUT if the module did + * not reset in time, or 0 upon success. */ static int _reset(struct omap_hwmod *oh) { - int ret; + int i, r; pr_debug("omap_hwmod: %s: resetting\n", oh->name); - ret = (oh->class->reset) ? oh->class->reset(oh) : _ocp_softreset(oh); + if (oh->class->reset) { + r = oh->class->reset(oh); + } else { + if (oh->rst_lines_cnt > 0) { + for (i = 0; i < oh->rst_lines_cnt; i++) + _assert_hardreset(oh, oh->rst_lines[i].name); + return 0; + } else { + r = _ocp_softreset(oh); + if (r == -ENOENT) + r = 0; + } + } + /* + * OCP_SYSCONFIG bits need to be reprogrammed after a + * softreset. The _enable() function should be split to avoid + * the rewrite of the OCP_SYSCONFIG register. + */ if (oh->class->sysc) { _update_sysc_cache(oh); _enable_sysc(oh); } - return ret; + return r; } /** @@ -1506,10 +1753,9 @@ static int _enable(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: enabling\n", oh->name); /* - * hwmods with HWMOD_INIT_NO_IDLE flag set are left - * in enabled state at init. - * Now that someone is really trying to enable them, - * just ensure that the hwmod mux is set. + * hwmods with HWMOD_INIT_NO_IDLE flag set are left in enabled + * state at init. Now that someone is really trying to enable + * them, just ensure that the hwmod mux is set. */ if (oh->_int_flags & _HWMOD_SKIP_ENABLE) { /* @@ -1532,15 +1778,17 @@ static int _enable(struct omap_hwmod *oh) return -EINVAL; } - /* - * If an IP contains only one HW reset line, then de-assert it in order - * to allow the module state transition. Otherwise the PRCM will return - * Intransition status, and the init will failed. + * If an IP block contains HW reset lines and any of them are + * asserted, we let integration code associated with that + * block handle the enable. We've received very little + * information on what those driver authors need, and until + * detailed information is provided and the driver code is + * posted to the public lists, this is probably the best we + * can do. */ - if ((oh->_state == _HWMOD_STATE_INITIALIZED || - oh->_state == _HWMOD_STATE_DISABLED) && oh->rst_lines_cnt == 1) - _deassert_hardreset(oh, oh->rst_lines[0].name); + if (_are_any_hardreset_lines_asserted(oh)) + return 0; /* Mux pins for device runtime if populated */ if (oh->mux && (!oh->mux->enabled || @@ -1615,6 +1863,9 @@ static int _idle(struct omap_hwmod *oh) return -EINVAL; } + if (_are_any_hardreset_lines_asserted(oh)) + return 0; + if (oh->class->sysc) _idle_sysc(oh); _del_initiator_dep(oh, mpu_oh); @@ -1687,7 +1938,7 @@ int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle) */ static int _shutdown(struct omap_hwmod *oh) { - int ret; + int ret, i; u8 prev_state; if (oh->_state != _HWMOD_STATE_IDLE && @@ -1697,6 +1948,9 @@ static int _shutdown(struct omap_hwmod *oh) return -EINVAL; } + if (_are_any_hardreset_lines_asserted(oh)) + return 0; + pr_debug("omap_hwmod: %s: disabling\n", oh->name); if (oh->class->pre_shutdown) { @@ -1728,12 +1982,8 @@ static int _shutdown(struct omap_hwmod *oh) } /* XXX Should this code also force-disable the optional clocks? */ - /* - * If an IP contains only one HW reset line, then assert it - * after disabling the clocks and before shutting down the IP. - */ - if (oh->rst_lines_cnt == 1) - _assert_hardreset(oh, oh->rst_lines[0].name); + for (i = 0; i < oh->rst_lines_cnt; i++) + _assert_hardreset(oh, oh->rst_lines[i].name); /* Mux pins to safe mode or use populated off mode values */ if (oh->mux) @@ -1745,59 +1995,186 @@ static int _shutdown(struct omap_hwmod *oh) } /** - * _setup - do initial configuration of omap_hwmod - * @oh: struct omap_hwmod * + * _init_mpu_rt_base - populate the virtual address for a hwmod + * @oh: struct omap_hwmod * to locate the virtual address * - * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh - * OCP_SYSCONFIG register. Returns 0. + * Cache the virtual address used by the MPU to access this IP block's + * registers. This address is needed early so the OCP registers that + * are part of the device's address space can be ioremapped properly. + * No return value. */ -static int _setup(struct omap_hwmod *oh, void *data) +static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data) { - int i, r; - u8 postsetup_state; + struct omap_hwmod_addr_space *mem; + void __iomem *va_start; + + if (!oh) + return; + + _save_mpu_port_index(oh); - if (oh->_state != _HWMOD_STATE_CLKS_INITED) + if (oh->_int_flags & _HWMOD_NO_MPU_PORT) + return; + + mem = _find_mpu_rt_addr_space(oh); + if (!mem) { + pr_debug("omap_hwmod: %s: no MPU register target found\n", + oh->name); + return; + } + + va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); + if (!va_start) { + pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name); + return; + } + + pr_debug("omap_hwmod: %s: MPU register target at va %p\n", + oh->name, va_start); + + oh->_mpu_rt_va = va_start; +} + +/** + * _init - initialize internal data for the hwmod @oh + * @oh: struct omap_hwmod * + * @n: (unused) + * + * Look up the clocks and the address space used by the MPU to access + * registers belonging to the hwmod @oh. @oh must already be + * registered at this point. This is the first of two phases for + * hwmod initialization. Code called here does not touch any hardware + * registers, it simply prepares internal data structures. Returns 0 + * upon success or if the hwmod isn't registered, or -EINVAL upon + * failure. + */ +static int __init _init(struct omap_hwmod *oh, void *data) +{ + int r; + + if (oh->_state != _HWMOD_STATE_REGISTERED) return 0; - /* Set iclk autoidle mode */ - if (oh->slaves_cnt > 0) { - for (i = 0; i < oh->slaves_cnt; i++) { - struct omap_hwmod_ocp_if *os = oh->slaves[i]; - struct clk *c = os->_clk; + _init_mpu_rt_base(oh, NULL); - if (!c) - continue; + r = _init_clocks(oh, NULL); + if (IS_ERR_VALUE(r)) { + WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh->name); + return -EINVAL; + } - if (os->flags & OCPIF_SWSUP_IDLE) { - /* XXX omap_iclk_deny_idle(c); */ - } else { - /* XXX omap_iclk_allow_idle(c); */ - clk_enable(c); - } + oh->_state = _HWMOD_STATE_INITIALIZED; + + return 0; +} + +/** + * _setup_iclk_autoidle - configure an IP block's interface clocks + * @oh: struct omap_hwmod * + * + * Set up the module's interface clocks. XXX This function is still mostly + * a stub; implementing this properly requires iclk autoidle usecounting in + * the clock code. No return value. + */ +static void __init _setup_iclk_autoidle(struct omap_hwmod *oh) +{ + struct omap_hwmod_ocp_if *os; + struct list_head *p; + int i = 0; + if (oh->_state != _HWMOD_STATE_INITIALIZED) + return; + + p = oh->slave_ports.next; + + while (i < oh->slaves_cnt) { + os = _fetch_next_ocp_if(&p, &i); + if (!os->_clk) + continue; + + if (os->flags & OCPIF_SWSUP_IDLE) { + /* XXX omap_iclk_deny_idle(c); */ + } else { + /* XXX omap_iclk_allow_idle(c); */ + clk_enable(os->_clk); } } - oh->_state = _HWMOD_STATE_INITIALIZED; + return; +} - /* - * In the case of hwmod with hardreset that should not be - * de-assert at boot time, we have to keep the module - * initialized, because we cannot enable it properly with the - * reset asserted. Exit without warning because that behavior is - * expected. - */ - if ((oh->flags & HWMOD_INIT_NO_RESET) && oh->rst_lines_cnt == 1) - return 0; +/** + * _setup_reset - reset an IP block during the setup process + * @oh: struct omap_hwmod * + * + * Reset the IP block corresponding to the hwmod @oh during the setup + * process. The IP block is first enabled so it can be successfully + * reset. Returns 0 upon success or a negative error code upon + * failure. + */ +static int __init _setup_reset(struct omap_hwmod *oh) +{ + int r; - r = _enable(oh); - if (r) { - pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n", - oh->name, oh->_state); - return 0; + if (oh->_state != _HWMOD_STATE_INITIALIZED) + return -EINVAL; + + if (oh->rst_lines_cnt == 0) { + r = _enable(oh); + if (r) { + pr_warning("omap_hwmod: %s: cannot be enabled for reset (%d)\n", + oh->name, oh->_state); + return -EINVAL; + } } if (!(oh->flags & HWMOD_INIT_NO_RESET)) - _reset(oh); + r = _reset(oh); + + return r; +} + +/** + * _setup_postsetup - transition to the appropriate state after _setup + * @oh: struct omap_hwmod * + * + * Place an IP block represented by @oh into a "post-setup" state -- + * either IDLE, ENABLED, or DISABLED. ("post-setup" simply means that + * this function is called at the end of _setup().) The postsetup + * state for an IP block can be changed by calling + * omap_hwmod_enter_postsetup_state() early in the boot process, + * before one of the omap_hwmod_setup*() functions are called for the + * IP block. + * + * The IP block stays in this state until a PM runtime-based driver is + * loaded for that IP block. A post-setup state of IDLE is + * appropriate for almost all IP blocks with runtime PM-enabled + * drivers, since those drivers are able to enable the IP block. A + * post-setup state of ENABLED is appropriate for kernels with PM + * runtime disabled. The DISABLED state is appropriate for unusual IP + * blocks such as the MPU WDTIMER on kernels without WDTIMER drivers + * included, since the WDTIMER starts running on reset and will reset + * the MPU if left active. + * + * This post-setup mechanism is deprecated. Once all of the OMAP + * drivers have been converted to use PM runtime, and all of the IP + * block data and interconnect data is available to the hwmod code, it + * should be possible to replace this mechanism with a "lazy reset" + * arrangement. In a "lazy reset" setup, each IP block is enabled + * when the driver first probes, then all remaining IP blocks without + * drivers are either shut down or enabled after the drivers have + * loaded. However, this cannot take place until the above + * preconditions have been met, since otherwise the late reset code + * has no way of knowing which IP blocks are in use by drivers, and + * which ones are unused. + * + * No return value. + */ +static void __init _setup_postsetup(struct omap_hwmod *oh) +{ + u8 postsetup_state; + + if (oh->rst_lines_cnt > 0) + return; postsetup_state = oh->_postsetup_state; if (postsetup_state == _HWMOD_STATE_UNKNOWN) @@ -1821,6 +2198,35 @@ static int _setup(struct omap_hwmod *oh, void *data) WARN(1, "hwmod: %s: unknown postsetup state %d! defaulting to enabled\n", oh->name, postsetup_state); + return; +} + +/** + * _setup - prepare IP block hardware for use + * @oh: struct omap_hwmod * + * @n: (unused, pass NULL) + * + * Configure the IP block represented by @oh. This may include + * enabling the IP block, resetting it, and placing it into a + * post-setup state, depending on the type of IP block and applicable + * flags. IP blocks are reset to prevent any previous configuration + * by the bootloader or previous operating system from interfering + * with power management or other parts of the system. The reset can + * be avoided; see omap_hwmod_no_setup_reset(). This is the second of + * two phases for hwmod initialization. Code called here generally + * affects the IP block hardware, or system integration hardware + * associated with the IP block. Returns 0. + */ +static int __init _setup(struct omap_hwmod *oh, void *data) +{ + if (oh->_state != _HWMOD_STATE_INITIALIZED) + return 0; + + _setup_iclk_autoidle(oh); + + if (!_setup_reset(oh)) + _setup_postsetup(oh); + return 0; } @@ -1843,8 +2249,6 @@ static int _setup(struct omap_hwmod *oh, void *data) */ static int __init _register(struct omap_hwmod *oh) { - int ms_id; - if (!oh || !oh->name || !oh->class || !oh->class->name || (oh->_state != _HWMOD_STATE_UNKNOWN)) return -EINVAL; @@ -1854,14 +2258,10 @@ static int __init _register(struct omap_hwmod *oh) if (_lookup(oh->name)) return -EEXIST; - ms_id = _find_mpu_port_index(oh); - if (!IS_ERR_VALUE(ms_id)) - oh->_mpu_port_index = ms_id; - else - oh->_int_flags |= _HWMOD_NO_MPU_PORT; - list_add_tail(&oh->node, &omap_hwmod_list); + INIT_LIST_HEAD(&oh->master_ports); + INIT_LIST_HEAD(&oh->slave_ports); spin_lock_init(&oh->_lock); oh->_state = _HWMOD_STATE_REGISTERED; @@ -1876,6 +2276,160 @@ static int __init _register(struct omap_hwmod *oh) return 0; } +/** + * _alloc_links - return allocated memory for hwmod links + * @ml: pointer to a struct omap_hwmod_link * for the master link + * @sl: pointer to a struct omap_hwmod_link * for the slave link + * + * Return pointers to two struct omap_hwmod_link records, via the + * addresses pointed to by @ml and @sl. Will first attempt to return + * memory allocated as part of a large initial block, but if that has + * been exhausted, will allocate memory itself. Since ideally this + * second allocation path will never occur, the number of these + * 'supplemental' allocations will be logged when debugging is + * enabled. Returns 0. + */ +static int __init _alloc_links(struct omap_hwmod_link **ml, + struct omap_hwmod_link **sl) +{ + unsigned int sz; + + if ((free_ls + LINKS_PER_OCP_IF) <= max_ls) { + *ml = &linkspace[free_ls++]; + *sl = &linkspace[free_ls++]; + return 0; + } + + sz = sizeof(struct omap_hwmod_link) * LINKS_PER_OCP_IF; + + *sl = NULL; + *ml = alloc_bootmem(sz); + + memset(*ml, 0, sz); + + *sl = (void *)(*ml) + sizeof(struct omap_hwmod_link); + + ls_supp++; + pr_debug("omap_hwmod: supplemental link allocations needed: %d\n", + ls_supp * LINKS_PER_OCP_IF); + + return 0; +}; + +/** + * _add_link - add an interconnect between two IP blocks + * @oi: pointer to a struct omap_hwmod_ocp_if record + * + * Add struct omap_hwmod_link records connecting the master IP block + * specified in @oi->master to @oi, and connecting the slave IP block + * specified in @oi->slave to @oi. This code is assumed to run before + * preemption or SMP has been enabled, thus avoiding the need for + * locking in this code. Changes to this assumption will require + * additional locking. Returns 0. + */ +static int __init _add_link(struct omap_hwmod_ocp_if *oi) +{ + struct omap_hwmod_link *ml, *sl; + + pr_debug("omap_hwmod: %s -> %s: adding link\n", oi->master->name, + oi->slave->name); + + _alloc_links(&ml, &sl); + + ml->ocp_if = oi; + INIT_LIST_HEAD(&ml->node); + list_add(&ml->node, &oi->master->master_ports); + oi->master->masters_cnt++; + + sl->ocp_if = oi; + INIT_LIST_HEAD(&sl->node); + list_add(&sl->node, &oi->slave->slave_ports); + oi->slave->slaves_cnt++; + + return 0; +} + +/** + * _register_link - register a struct omap_hwmod_ocp_if + * @oi: struct omap_hwmod_ocp_if * + * + * Registers the omap_hwmod_ocp_if record @oi. Returns -EEXIST if it + * has already been registered; -EINVAL if @oi is NULL or if the + * record pointed to by @oi is missing required fields; or 0 upon + * success. + * + * XXX The data should be copied into bootmem, so the original data + * should be marked __initdata and freed after init. This would allow + * unneeded omap_hwmods to be freed on multi-OMAP configurations. + */ +static int __init _register_link(struct omap_hwmod_ocp_if *oi) +{ + if (!oi || !oi->master || !oi->slave || !oi->user) + return -EINVAL; + + if (oi->_int_flags & _OCPIF_INT_FLAGS_REGISTERED) + return -EEXIST; + + pr_debug("omap_hwmod: registering link from %s to %s\n", + oi->master->name, oi->slave->name); + + /* + * Register the connected hwmods, if they haven't been + * registered already + */ + if (oi->master->_state != _HWMOD_STATE_REGISTERED) + _register(oi->master); + + if (oi->slave->_state != _HWMOD_STATE_REGISTERED) + _register(oi->slave); + + _add_link(oi); + + oi->_int_flags |= _OCPIF_INT_FLAGS_REGISTERED; + + return 0; +} + +/** + * _alloc_linkspace - allocate large block of hwmod links + * @ois: pointer to an array of struct omap_hwmod_ocp_if records to count + * + * Allocate a large block of struct omap_hwmod_link records. This + * improves boot time significantly by avoiding the need to allocate + * individual records one by one. If the number of records to + * allocate in the block hasn't been manually specified, this function + * will count the number of struct omap_hwmod_ocp_if records in @ois + * and use that to determine the allocation size. For SoC families + * that require multiple list registrations, such as OMAP3xxx, this + * estimation process isn't optimal, so manual estimation is advised + * in those cases. Returns -EEXIST if the allocation has already occurred + * or 0 upon success. + */ +static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois) +{ + unsigned int i = 0; + unsigned int sz; + + if (linkspace) { + WARN(1, "linkspace already allocated\n"); + return -EEXIST; + } + + if (max_ls == 0) + while (ois[i++]) + max_ls += LINKS_PER_OCP_IF; + + sz = sizeof(struct omap_hwmod_link) * max_ls; + + pr_debug("omap_hwmod: %s: allocating %d byte linkspace (%d links)\n", + __func__, sz, max_ls); + + linkspace = alloc_bootmem(sz); + + memset(linkspace, 0, sz); + + return 0; +} /* Public functions */ @@ -2004,120 +2558,101 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), } /** - * omap_hwmod_register - register an array of hwmods - * @ohs: pointer to an array of omap_hwmods to register + * omap_hwmod_register_links - register an array of hwmod links + * @ois: pointer to an array of omap_hwmod_ocp_if to register * * Intended to be called early in boot before the clock framework is - * initialized. If @ohs is not null, will register all omap_hwmods - * listed in @ohs that are valid for this chip. Returns 0. + * initialized. If @ois is not null, will register all omap_hwmods + * listed in @ois that are valid for this chip. Returns 0. */ -int __init omap_hwmod_register(struct omap_hwmod **ohs) +int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois) { int r, i; - if (!ohs) + if (!ois) return 0; + if (!linkspace) { + if (_alloc_linkspace(ois)) { + pr_err("omap_hwmod: could not allocate link space\n"); + return -ENOMEM; + } + } + i = 0; do { - r = _register(ohs[i]); - WARN(r, "omap_hwmod: %s: _register returned %d\n", ohs[i]->name, - r); - } while (ohs[++i]); + r = _register_link(ois[i]); + WARN(r && r != -EEXIST, + "omap_hwmod: _register_link(%s -> %s) returned %d\n", + ois[i]->master->name, ois[i]->slave->name, r); + } while (ois[++i]); return 0; } -/* - * _populate_mpu_rt_base - populate the virtual address for a hwmod +/** + * _ensure_mpu_hwmod_is_setup - ensure the MPU SS hwmod is init'ed and set up + * @oh: pointer to the hwmod currently being set up (usually not the MPU) * - * Must be called only from omap_hwmod_setup_*() so ioremap works properly. - * Assumes the caller takes care of locking if needed. + * If the hwmod data corresponding to the MPU subsystem IP block + * hasn't been initialized and set up yet, do so now. This must be + * done first since sleep dependencies may be added from other hwmods + * to the MPU. Intended to be called only by omap_hwmod_setup*(). No + * return value. */ -static int __init _populate_mpu_rt_base(struct omap_hwmod *oh, void *data) +static void __init _ensure_mpu_hwmod_is_setup(struct omap_hwmod *oh) { - if (oh->_state != _HWMOD_STATE_REGISTERED) - return 0; - - if (oh->_int_flags & _HWMOD_NO_MPU_PORT) - return 0; - - oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index); - - return 0; + if (!mpu_oh || mpu_oh->_state == _HWMOD_STATE_UNKNOWN) + pr_err("omap_hwmod: %s: MPU initiator hwmod %s not yet registered\n", + __func__, MPU_INITIATOR_NAME); + else if (mpu_oh->_state == _HWMOD_STATE_REGISTERED && oh != mpu_oh) + omap_hwmod_setup_one(MPU_INITIATOR_NAME); } /** * omap_hwmod_setup_one - set up a single hwmod * @oh_name: const char * name of the already-registered hwmod to set up * - * Must be called after omap2_clk_init(). Resolves the struct clk - * names to struct clk pointers for each registered omap_hwmod. Also - * calls _setup() on each hwmod. Returns -EINVAL upon error or 0 upon - * success. + * Initialize and set up a single hwmod. Intended to be used for a + * small number of early devices, such as the timer IP blocks used for + * the scheduler clock. Must be called after omap2_clk_init(). + * Resolves the struct clk names to struct clk pointers for each + * registered omap_hwmod. Also calls _setup() on each hwmod. Returns + * -EINVAL upon error or 0 upon success. */ int __init omap_hwmod_setup_one(const char *oh_name) { struct omap_hwmod *oh; - int r; pr_debug("omap_hwmod: %s: %s\n", oh_name, __func__); - if (!mpu_oh) { - pr_err("omap_hwmod: %s: cannot setup_one: MPU initiator hwmod %s not yet registered\n", - oh_name, MPU_INITIATOR_NAME); - return -EINVAL; - } - oh = _lookup(oh_name); if (!oh) { WARN(1, "omap_hwmod: %s: hwmod not yet registered\n", oh_name); return -EINVAL; } - if (mpu_oh->_state == _HWMOD_STATE_REGISTERED && oh != mpu_oh) - omap_hwmod_setup_one(MPU_INITIATOR_NAME); - - r = _populate_mpu_rt_base(oh, NULL); - if (IS_ERR_VALUE(r)) { - WARN(1, "omap_hwmod: %s: couldn't set mpu_rt_base\n", oh_name); - return -EINVAL; - } - - r = _init_clocks(oh, NULL); - if (IS_ERR_VALUE(r)) { - WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh_name); - return -EINVAL; - } + _ensure_mpu_hwmod_is_setup(oh); + _init(oh, NULL); _setup(oh, NULL); return 0; } /** - * omap_hwmod_setup - do some post-clock framework initialization + * omap_hwmod_setup_all - set up all registered IP blocks * - * Must be called after omap2_clk_init(). Resolves the struct clk names - * to struct clk pointers for each registered omap_hwmod. Also calls - * _setup() on each hwmod. Returns 0 upon success. + * Initialize and set up all IP blocks registered with the hwmod code. + * Must be called after omap2_clk_init(). Resolves the struct clk + * names to struct clk pointers for each registered omap_hwmod. Also + * calls _setup() on each hwmod. Returns 0 upon success. */ static int __init omap_hwmod_setup_all(void) { - int r; - - if (!mpu_oh) { - pr_err("omap_hwmod: %s: MPU initiator hwmod %s not yet registered\n", - __func__, MPU_INITIATOR_NAME); - return -EINVAL; - } - - r = omap_hwmod_for_each(_populate_mpu_rt_base, NULL); - - r = omap_hwmod_for_each(_init_clocks, NULL); - WARN(IS_ERR_VALUE(r), - "omap_hwmod: %s: _init_clocks failed\n", __func__); + _ensure_mpu_hwmod_is_setup(NULL); + omap_hwmod_for_each(_init, NULL); omap_hwmod_for_each(_setup, NULL); return 0; @@ -2274,6 +2809,10 @@ int omap_hwmod_reset(struct omap_hwmod *oh) return r; } +/* + * IP block data retrieval functions + */ + /** * omap_hwmod_count_resources - count number of struct resources needed by hwmod * @oh: struct omap_hwmod * @@ -2292,12 +2831,19 @@ int omap_hwmod_reset(struct omap_hwmod *oh) */ int omap_hwmod_count_resources(struct omap_hwmod *oh) { - int ret, i; + struct omap_hwmod_ocp_if *os; + struct list_head *p; + int ret; + int i = 0; ret = _count_mpu_irqs(oh) + _count_sdma_reqs(oh); - for (i = 0; i < oh->slaves_cnt; i++) - ret += _count_ocp_if_addr_spaces(oh->slaves[i]); + p = oh->slave_ports.next; + + while (i < oh->slaves_cnt) { + os = _fetch_next_ocp_if(&p, &i); + ret += _count_ocp_if_addr_spaces(os); + } return ret; } @@ -2314,7 +2860,9 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh) */ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) { - int i, j, mpu_irqs_cnt, sdma_reqs_cnt; + struct omap_hwmod_ocp_if *os; + struct list_head *p; + int i, j, mpu_irqs_cnt, sdma_reqs_cnt, addr_cnt; int r = 0; /* For each IRQ, DMA, memory area, fill in array.*/ @@ -2337,11 +2885,11 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) r++; } - for (i = 0; i < oh->slaves_cnt; i++) { - struct omap_hwmod_ocp_if *os; - int addr_cnt; + p = oh->slave_ports.next; - os = oh->slaves[i]; + i = 0; + while (i < oh->slaves_cnt) { + os = _fetch_next_ocp_if(&p, &i); addr_cnt = _count_ocp_if_addr_spaces(os); for (j = 0; j < addr_cnt; j++) { @@ -2357,6 +2905,69 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) } /** + * omap_hwmod_get_resource_byname - fetch IP block integration data by name + * @oh: struct omap_hwmod * to operate on + * @type: one of the IORESOURCE_* constants from include/linux/ioport.h + * @name: pointer to the name of the data to fetch (optional) + * @rsrc: pointer to a struct resource, allocated by the caller + * + * Retrieve MPU IRQ, SDMA request line, or address space start/end + * data for the IP block pointed to by @oh. The data will be filled + * into a struct resource record pointed to by @rsrc. The struct + * resource must be allocated by the caller. When @name is non-null, + * the data associated with the matching entry in the IRQ/SDMA/address + * space hwmod data arrays will be returned. If @name is null, the + * first array entry will be returned. Data order is not meaningful + * in hwmod data, so callers are strongly encouraged to use a non-null + * @name whenever possible to avoid unpredictable effects if hwmod + * data is later added that causes data ordering to change. This + * function is only intended for use by OMAP core code. Device + * drivers should not call this function - the appropriate bus-related + * data accessor functions should be used instead. Returns 0 upon + * success or a negative error code upon error. + */ +int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type, + const char *name, struct resource *rsrc) +{ + int r; + unsigned int irq, dma; + u32 pa_start, pa_end; + + if (!oh || !rsrc) + return -EINVAL; + + if (type == IORESOURCE_IRQ) { + r = _get_mpu_irq_by_name(oh, name, &irq); + if (r) + return r; + + rsrc->start = irq; + rsrc->end = irq; + } else if (type == IORESOURCE_DMA) { + r = _get_sdma_req_by_name(oh, name, &dma); + if (r) + return r; + + rsrc->start = dma; + rsrc->end = dma; + } else if (type == IORESOURCE_MEM) { + r = _get_addr_space_by_name(oh, name, &pa_start, &pa_end); + if (r) + return r; + + rsrc->start = pa_start; + rsrc->end = pa_end; + } else { + return -EINVAL; + } + + rsrc->flags = type; + rsrc->name = name; + + return 0; +} + +/** * omap_hwmod_get_pwrdm - return pointer to this module's main powerdomain * @oh: struct omap_hwmod * * @@ -2370,6 +2981,7 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh) { struct clk *c; + struct omap_hwmod_ocp_if *oi; if (!oh) return NULL; @@ -2377,9 +2989,10 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh) if (oh->_clk) { c = oh->_clk; } else { - if (oh->_int_flags & _HWMOD_NO_MPU_PORT) + oi = _find_mpu_rt_port(oh); + if (!oi) return NULL; - c = oh->slaves[oh->_mpu_port_index]->_clk; + c = oi->_clk; } if (!c->clkdm) @@ -2653,10 +3266,10 @@ int omap_hwmod_for_each_by_class(const char *classname, * @state: state that _setup() should leave the hwmod in * * Sets the hwmod state that @oh will enter at the end of _setup() - * (called by omap_hwmod_setup_*()). Only valid to call between - * calling omap_hwmod_register() and omap_hwmod_setup_*(). Returns - * 0 upon success or -EINVAL if there is a problem with the arguments - * or if the hwmod is in the wrong state. + * (called by omap_hwmod_setup_*()). See also the documentation + * for _setup_postsetup(), above. Returns 0 upon success or + * -EINVAL if there is a problem with the arguments or if the hwmod is + * in the wrong state. */ int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state) { diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index a6bde34e443a..2c087ffc6a92 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -2,6 +2,7 @@ * omap_hwmod_2420_data.c - hardware modules present on the OMAP2420 chips * * Copyright (C) 2009-2011 Nokia Corporation + * Copyright (C) 2012 Texas Instruments, Inc. * Paul Walmsley * * This program is free software; you can redistribute it and/or modify @@ -32,707 +33,268 @@ /* * OMAP2420 hardware module integration data * - * ALl of the data in this section should be autogeneratable from the + * All of the data in this section should be autogeneratable from the * TI hardware database or other technical documentation. Data that * is driver-specific or driver-kernel integration-specific belongs * elsewhere. */ -static struct omap_hwmod omap2420_mpu_hwmod; -static struct omap_hwmod omap2420_iva_hwmod; -static struct omap_hwmod omap2420_l3_main_hwmod; -static struct omap_hwmod omap2420_l4_core_hwmod; -static struct omap_hwmod omap2420_dss_core_hwmod; -static struct omap_hwmod omap2420_dss_dispc_hwmod; -static struct omap_hwmod omap2420_dss_rfbi_hwmod; -static struct omap_hwmod omap2420_dss_venc_hwmod; -static struct omap_hwmod omap2420_wd_timer2_hwmod; -static struct omap_hwmod omap2420_gpio1_hwmod; -static struct omap_hwmod omap2420_gpio2_hwmod; -static struct omap_hwmod omap2420_gpio3_hwmod; -static struct omap_hwmod omap2420_gpio4_hwmod; -static struct omap_hwmod omap2420_dma_system_hwmod; -static struct omap_hwmod omap2420_mcspi1_hwmod; -static struct omap_hwmod omap2420_mcspi2_hwmod; - -/* L3 -> L4_CORE interface */ -static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = { - .master = &omap2420_l3_main_hwmod, - .slave = &omap2420_l4_core_hwmod, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* MPU -> L3 interface */ -static struct omap_hwmod_ocp_if omap2420_mpu__l3_main = { - .master = &omap2420_mpu_hwmod, - .slave = &omap2420_l3_main_hwmod, - .user = OCP_USER_MPU, -}; - -/* Slave interfaces on the L3 interconnect */ -static struct omap_hwmod_ocp_if *omap2420_l3_main_slaves[] = { - &omap2420_mpu__l3_main, -}; - -/* DSS -> l3 */ -static struct omap_hwmod_ocp_if omap2420_dss__l3 = { - .master = &omap2420_dss_core_hwmod, - .slave = &omap2420_l3_main_hwmod, - .fw = { - .omap2 = { - .l3_perm_bit = OMAP2_L3_CORE_FW_CONNID_DSS, - .flags = OMAP_FIREWALL_L3, - } - }, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* Master interfaces on the L3 interconnect */ -static struct omap_hwmod_ocp_if *omap2420_l3_main_masters[] = { - &omap2420_l3_main__l4_core, -}; - -/* L3 */ -static struct omap_hwmod omap2420_l3_main_hwmod = { - .name = "l3_main", - .class = &l3_hwmod_class, - .masters = omap2420_l3_main_masters, - .masters_cnt = ARRAY_SIZE(omap2420_l3_main_masters), - .slaves = omap2420_l3_main_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_l3_main_slaves), - .flags = HWMOD_NO_IDLEST, -}; - -static struct omap_hwmod omap2420_l4_wkup_hwmod; -static struct omap_hwmod omap2420_uart1_hwmod; -static struct omap_hwmod omap2420_uart2_hwmod; -static struct omap_hwmod omap2420_uart3_hwmod; -static struct omap_hwmod omap2420_i2c1_hwmod; -static struct omap_hwmod omap2420_i2c2_hwmod; -static struct omap_hwmod omap2420_mcbsp1_hwmod; -static struct omap_hwmod omap2420_mcbsp2_hwmod; - -/* l4 core -> mcspi1 interface */ -static struct omap_hwmod_ocp_if omap2420_l4_core__mcspi1 = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_mcspi1_hwmod, - .clk = "mcspi1_ick", - .addr = omap2_mcspi1_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4 core -> mcspi2 interface */ -static struct omap_hwmod_ocp_if omap2420_l4_core__mcspi2 = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_mcspi2_hwmod, - .clk = "mcspi2_ick", - .addr = omap2_mcspi2_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4_CORE -> L4_WKUP interface */ -static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_l4_wkup_hwmod, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4 CORE -> UART1 interface */ -static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_uart1_hwmod, - .clk = "uart1_ick", - .addr = omap2xxx_uart1_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4 CORE -> UART2 interface */ -static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_uart2_hwmod, - .clk = "uart2_ick", - .addr = omap2xxx_uart2_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4 PER -> UART3 interface */ -static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_uart3_hwmod, - .clk = "uart3_ick", - .addr = omap2xxx_uart3_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4 CORE -> I2C1 interface */ -static struct omap_hwmod_ocp_if omap2420_l4_core__i2c1 = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_i2c1_hwmod, - .clk = "i2c1_ick", - .addr = omap2_i2c1_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4 CORE -> I2C2 interface */ -static struct omap_hwmod_ocp_if omap2420_l4_core__i2c2 = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_i2c2_hwmod, - .clk = "i2c2_ick", - .addr = omap2_i2c2_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* Slave interfaces on the L4_CORE interconnect */ -static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = { - &omap2420_l3_main__l4_core, -}; - -/* Master interfaces on the L4_CORE interconnect */ -static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = { - &omap2420_l4_core__l4_wkup, - &omap2_l4_core__uart1, - &omap2_l4_core__uart2, - &omap2_l4_core__uart3, - &omap2420_l4_core__i2c1, - &omap2420_l4_core__i2c2 -}; - -/* L4 CORE */ -static struct omap_hwmod omap2420_l4_core_hwmod = { - .name = "l4_core", - .class = &l4_hwmod_class, - .masters = omap2420_l4_core_masters, - .masters_cnt = ARRAY_SIZE(omap2420_l4_core_masters), - .slaves = omap2420_l4_core_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_l4_core_slaves), - .flags = HWMOD_NO_IDLEST, -}; - -/* Slave interfaces on the L4_WKUP interconnect */ -static struct omap_hwmod_ocp_if *omap2420_l4_wkup_slaves[] = { - &omap2420_l4_core__l4_wkup, -}; - -/* Master interfaces on the L4_WKUP interconnect */ -static struct omap_hwmod_ocp_if *omap2420_l4_wkup_masters[] = { -}; - -/* L4 WKUP */ -static struct omap_hwmod omap2420_l4_wkup_hwmod = { - .name = "l4_wkup", - .class = &l4_hwmod_class, - .masters = omap2420_l4_wkup_masters, - .masters_cnt = ARRAY_SIZE(omap2420_l4_wkup_masters), - .slaves = omap2420_l4_wkup_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_l4_wkup_slaves), - .flags = HWMOD_NO_IDLEST, -}; - -/* Master interfaces on the MPU device */ -static struct omap_hwmod_ocp_if *omap2420_mpu_masters[] = { - &omap2420_mpu__l3_main, -}; - -/* MPU */ -static struct omap_hwmod omap2420_mpu_hwmod = { - .name = "mpu", - .class = &mpu_hwmod_class, - .main_clk = "mpu_ck", - .masters = omap2420_mpu_masters, - .masters_cnt = ARRAY_SIZE(omap2420_mpu_masters), -}; - /* - * IVA1 interface data + * IP blocks */ -/* IVA <- L3 interface */ -static struct omap_hwmod_ocp_if omap2420_l3__iva = { - .master = &omap2420_l3_main_hwmod, - .slave = &omap2420_iva_hwmod, - .clk = "iva1_ifck", - .user = OCP_USER_MPU | OCP_USER_SDMA, +/* IVA1 (IVA1) */ +static struct omap_hwmod_class iva1_hwmod_class = { + .name = "iva1", }; -static struct omap_hwmod_ocp_if *omap2420_iva_masters[] = { - &omap2420_l3__iva, +static struct omap_hwmod_rst_info omap2420_iva_resets[] = { + { .name = "iva", .rst_shift = 8 }, }; -/* - * IVA2 (IVA2) - */ - static struct omap_hwmod omap2420_iva_hwmod = { .name = "iva", - .class = &iva_hwmod_class, - .masters = omap2420_iva_masters, - .masters_cnt = ARRAY_SIZE(omap2420_iva_masters), + .class = &iva1_hwmod_class, + .clkdm_name = "iva1_clkdm", + .rst_lines = omap2420_iva_resets, + .rst_lines_cnt = ARRAY_SIZE(omap2420_iva_resets), + .main_clk = "iva1_ifck", }; -/* always-on timers dev attribute */ -static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = { - .timer_capability = OMAP_TIMER_ALWON, -}; - -/* pwm timers dev attribute */ -static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = { - .timer_capability = OMAP_TIMER_HAS_PWM, -}; - -/* timer1 */ -static struct omap_hwmod omap2420_timer1_hwmod; - -static struct omap_hwmod_addr_space omap2420_timer1_addrs[] = { - { - .pa_start = 0x48028000, - .pa_end = 0x48028000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } +/* DSP */ +static struct omap_hwmod_class dsp_hwmod_class = { + .name = "dsp", }; -/* l4_wkup -> timer1 */ -static struct omap_hwmod_ocp_if omap2420_l4_wkup__timer1 = { - .master = &omap2420_l4_wkup_hwmod, - .slave = &omap2420_timer1_hwmod, - .clk = "gpt1_ick", - .addr = omap2420_timer1_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, +static struct omap_hwmod_rst_info omap2420_dsp_resets[] = { + { .name = "logic", .rst_shift = 0 }, + { .name = "mmu", .rst_shift = 1 }, }; -/* timer1 slave port */ -static struct omap_hwmod_ocp_if *omap2420_timer1_slaves[] = { - &omap2420_l4_wkup__timer1, +static struct omap_hwmod omap2420_dsp_hwmod = { + .name = "dsp", + .class = &dsp_hwmod_class, + .clkdm_name = "dsp_clkdm", + .rst_lines = omap2420_dsp_resets, + .rst_lines_cnt = ARRAY_SIZE(omap2420_dsp_resets), + .main_clk = "dsp_fck", }; -/* timer1 hwmod */ -static struct omap_hwmod omap2420_timer1_hwmod = { - .name = "timer1", - .mpu_irqs = omap2_timer1_mpu_irqs, - .main_clk = "gpt1_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT1_SHIFT, - .module_offs = WKUP_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT, - }, - }, - .dev_attr = &capability_alwon_dev_attr, - .slaves = omap2420_timer1_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_timer1_slaves), - .class = &omap2xxx_timer_hwmod_class, +/* I2C common */ +static struct omap_hwmod_class_sysconfig i2c_sysc = { + .rev_offs = 0x00, + .sysc_offs = 0x20, + .syss_offs = 0x10, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .sysc_fields = &omap_hwmod_sysc_type1, }; -/* timer2 */ -static struct omap_hwmod omap2420_timer2_hwmod; - -/* l4_core -> timer2 */ -static struct omap_hwmod_ocp_if omap2420_l4_core__timer2 = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_timer2_hwmod, - .clk = "gpt2_ick", - .addr = omap2xxx_timer2_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, +static struct omap_hwmod_class i2c_class = { + .name = "i2c", + .sysc = &i2c_sysc, + .rev = OMAP_I2C_IP_VERSION_1, + .reset = &omap_i2c_reset, }; -/* timer2 slave port */ -static struct omap_hwmod_ocp_if *omap2420_timer2_slaves[] = { - &omap2420_l4_core__timer2, +static struct omap_i2c_dev_attr i2c_dev_attr = { + .flags = OMAP_I2C_FLAG_NO_FIFO | + OMAP_I2C_FLAG_SIMPLE_CLOCK | + OMAP_I2C_FLAG_16BIT_DATA_REG | + OMAP_I2C_FLAG_BUS_SHIFT_2, }; -/* timer2 hwmod */ -static struct omap_hwmod omap2420_timer2_hwmod = { - .name = "timer2", - .mpu_irqs = omap2_timer2_mpu_irqs, - .main_clk = "gpt2_fck", +/* I2C1 */ +static struct omap_hwmod omap2420_i2c1_hwmod = { + .name = "i2c1", + .mpu_irqs = omap2_i2c1_mpu_irqs, + .sdma_reqs = omap2_i2c1_sdma_reqs, + .main_clk = "i2c1_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT2_SHIFT, .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT, - }, - }, - .dev_attr = &capability_alwon_dev_attr, - .slaves = omap2420_timer2_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_timer2_slaves), - .class = &omap2xxx_timer_hwmod_class, -}; - -/* timer3 */ -static struct omap_hwmod omap2420_timer3_hwmod; - -/* l4_core -> timer3 */ -static struct omap_hwmod_ocp_if omap2420_l4_core__timer3 = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_timer3_hwmod, - .clk = "gpt3_ick", - .addr = omap2xxx_timer3_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer3 slave port */ -static struct omap_hwmod_ocp_if *omap2420_timer3_slaves[] = { - &omap2420_l4_core__timer3, -}; - -/* timer3 hwmod */ -static struct omap_hwmod omap2420_timer3_hwmod = { - .name = "timer3", - .mpu_irqs = omap2_timer3_mpu_irqs, - .main_clk = "gpt3_fck", - .prcm = { - .omap2 = { .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT3_SHIFT, - .module_offs = CORE_MOD, + .module_bit = OMAP2420_EN_I2C1_SHIFT, .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT, + .idlest_idle_bit = OMAP2420_ST_I2C1_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, - .slaves = omap2420_timer3_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_timer3_slaves), - .class = &omap2xxx_timer_hwmod_class, -}; - -/* timer4 */ -static struct omap_hwmod omap2420_timer4_hwmod; - -/* l4_core -> timer4 */ -static struct omap_hwmod_ocp_if omap2420_l4_core__timer4 = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_timer4_hwmod, - .clk = "gpt4_ick", - .addr = omap2xxx_timer4_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer4 slave port */ -static struct omap_hwmod_ocp_if *omap2420_timer4_slaves[] = { - &omap2420_l4_core__timer4, + .class = &i2c_class, + .dev_attr = &i2c_dev_attr, + .flags = HWMOD_16BIT_REG, }; -/* timer4 hwmod */ -static struct omap_hwmod omap2420_timer4_hwmod = { - .name = "timer4", - .mpu_irqs = omap2_timer4_mpu_irqs, - .main_clk = "gpt4_fck", +/* I2C2 */ +static struct omap_hwmod omap2420_i2c2_hwmod = { + .name = "i2c2", + .mpu_irqs = omap2_i2c2_mpu_irqs, + .sdma_reqs = omap2_i2c2_sdma_reqs, + .main_clk = "i2c2_fck", .prcm = { .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT4_SHIFT, .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT, - }, - }, - .dev_attr = &capability_alwon_dev_attr, - .slaves = omap2420_timer4_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_timer4_slaves), - .class = &omap2xxx_timer_hwmod_class, -}; - -/* timer5 */ -static struct omap_hwmod omap2420_timer5_hwmod; - -/* l4_core -> timer5 */ -static struct omap_hwmod_ocp_if omap2420_l4_core__timer5 = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_timer5_hwmod, - .clk = "gpt5_ick", - .addr = omap2xxx_timer5_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer5 slave port */ -static struct omap_hwmod_ocp_if *omap2420_timer5_slaves[] = { - &omap2420_l4_core__timer5, -}; - -/* timer5 hwmod */ -static struct omap_hwmod omap2420_timer5_hwmod = { - .name = "timer5", - .mpu_irqs = omap2_timer5_mpu_irqs, - .main_clk = "gpt5_fck", - .prcm = { - .omap2 = { .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT5_SHIFT, - .module_offs = CORE_MOD, + .module_bit = OMAP2420_EN_I2C2_SHIFT, .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT, + .idlest_idle_bit = OMAP2420_ST_I2C2_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, - .slaves = omap2420_timer5_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_timer5_slaves), - .class = &omap2xxx_timer_hwmod_class, -}; - - -/* timer6 */ -static struct omap_hwmod omap2420_timer6_hwmod; - -/* l4_core -> timer6 */ -static struct omap_hwmod_ocp_if omap2420_l4_core__timer6 = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_timer6_hwmod, - .clk = "gpt6_ick", - .addr = omap2xxx_timer6_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer6 slave port */ -static struct omap_hwmod_ocp_if *omap2420_timer6_slaves[] = { - &omap2420_l4_core__timer6, + .class = &i2c_class, + .dev_attr = &i2c_dev_attr, + .flags = HWMOD_16BIT_REG, }; -/* timer6 hwmod */ -static struct omap_hwmod omap2420_timer6_hwmod = { - .name = "timer6", - .mpu_irqs = omap2_timer6_mpu_irqs, - .main_clk = "gpt6_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT6_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT, - }, - }, - .dev_attr = &capability_alwon_dev_attr, - .slaves = omap2420_timer6_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_timer6_slaves), - .class = &omap2xxx_timer_hwmod_class, +/* dma attributes */ +static struct omap_dma_dev_attr dma_dev_attr = { + .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY | + IS_CSSA_32 | IS_CDSA_32, + .lch_count = 32, }; -/* timer7 */ -static struct omap_hwmod omap2420_timer7_hwmod; - -/* l4_core -> timer7 */ -static struct omap_hwmod_ocp_if omap2420_l4_core__timer7 = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_timer7_hwmod, - .clk = "gpt7_ick", - .addr = omap2xxx_timer7_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, +static struct omap_hwmod omap2420_dma_system_hwmod = { + .name = "dma", + .class = &omap2xxx_dma_hwmod_class, + .mpu_irqs = omap2_dma_system_irqs, + .main_clk = "core_l3_ck", + .dev_attr = &dma_dev_attr, + .flags = HWMOD_NO_IDLEST, }; -/* timer7 slave port */ -static struct omap_hwmod_ocp_if *omap2420_timer7_slaves[] = { - &omap2420_l4_core__timer7, +/* mailbox */ +static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = { + { .name = "dsp", .irq = 26 }, + { .name = "iva", .irq = 34 }, + { .irq = -1 } }; -/* timer7 hwmod */ -static struct omap_hwmod omap2420_timer7_hwmod = { - .name = "timer7", - .mpu_irqs = omap2_timer7_mpu_irqs, - .main_clk = "gpt7_fck", +static struct omap_hwmod omap2420_mailbox_hwmod = { + .name = "mailbox", + .class = &omap2xxx_mailbox_hwmod_class, + .mpu_irqs = omap2420_mailbox_irqs, + .main_clk = "mailboxes_ick", .prcm = { .omap2 = { .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT7_SHIFT, + .module_bit = OMAP24XX_EN_MAILBOXES_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT, + .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, - .slaves = omap2420_timer7_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_timer7_slaves), - .class = &omap2xxx_timer_hwmod_class, }; -/* timer8 */ -static struct omap_hwmod omap2420_timer8_hwmod; +/* + * 'mcbsp' class + * multi channel buffered serial port controller + */ -/* l4_core -> timer8 */ -static struct omap_hwmod_ocp_if omap2420_l4_core__timer8 = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_timer8_hwmod, - .clk = "gpt8_ick", - .addr = omap2xxx_timer8_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, +static struct omap_hwmod_class omap2420_mcbsp_hwmod_class = { + .name = "mcbsp", }; -/* timer8 slave port */ -static struct omap_hwmod_ocp_if *omap2420_timer8_slaves[] = { - &omap2420_l4_core__timer8, +/* mcbsp1 */ +static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = { + { .name = "tx", .irq = 59 }, + { .name = "rx", .irq = 60 }, + { .irq = -1 } }; -/* timer8 hwmod */ -static struct omap_hwmod omap2420_timer8_hwmod = { - .name = "timer8", - .mpu_irqs = omap2_timer8_mpu_irqs, - .main_clk = "gpt8_fck", +static struct omap_hwmod omap2420_mcbsp1_hwmod = { + .name = "mcbsp1", + .class = &omap2420_mcbsp_hwmod_class, + .mpu_irqs = omap2420_mcbsp1_irqs, + .sdma_reqs = omap2_mcbsp1_sdma_reqs, + .main_clk = "mcbsp1_fck", .prcm = { .omap2 = { .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT8_SHIFT, + .module_bit = OMAP24XX_EN_MCBSP1_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT, + .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT, }, }, - .dev_attr = &capability_alwon_dev_attr, - .slaves = omap2420_timer8_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_timer8_slaves), - .class = &omap2xxx_timer_hwmod_class, -}; - -/* timer9 */ -static struct omap_hwmod omap2420_timer9_hwmod; - -/* l4_core -> timer9 */ -static struct omap_hwmod_ocp_if omap2420_l4_core__timer9 = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_timer9_hwmod, - .clk = "gpt9_ick", - .addr = omap2xxx_timer9_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* timer9 slave port */ -static struct omap_hwmod_ocp_if *omap2420_timer9_slaves[] = { - &omap2420_l4_core__timer9, +/* mcbsp2 */ +static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = { + { .name = "tx", .irq = 62 }, + { .name = "rx", .irq = 63 }, + { .irq = -1 } }; -/* timer9 hwmod */ -static struct omap_hwmod omap2420_timer9_hwmod = { - .name = "timer9", - .mpu_irqs = omap2_timer9_mpu_irqs, - .main_clk = "gpt9_fck", +static struct omap_hwmod omap2420_mcbsp2_hwmod = { + .name = "mcbsp2", + .class = &omap2420_mcbsp_hwmod_class, + .mpu_irqs = omap2420_mcbsp2_irqs, + .sdma_reqs = omap2_mcbsp2_sdma_reqs, + .main_clk = "mcbsp2_fck", .prcm = { .omap2 = { .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT9_SHIFT, + .module_bit = OMAP24XX_EN_MCBSP2_SHIFT, .module_offs = CORE_MOD, .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT, + .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT, }, }, - .dev_attr = &capability_pwm_dev_attr, - .slaves = omap2420_timer9_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_timer9_slaves), - .class = &omap2xxx_timer_hwmod_class, }; -/* timer10 */ -static struct omap_hwmod omap2420_timer10_hwmod; +/* + * interfaces + */ -/* l4_core -> timer10 */ -static struct omap_hwmod_ocp_if omap2420_l4_core__timer10 = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_timer10_hwmod, - .clk = "gpt10_ick", - .addr = omap2_timer10_addrs, +/* L4 CORE -> I2C1 interface */ +static struct omap_hwmod_ocp_if omap2420_l4_core__i2c1 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2420_i2c1_hwmod, + .clk = "i2c1_ick", + .addr = omap2_i2c1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* timer10 slave port */ -static struct omap_hwmod_ocp_if *omap2420_timer10_slaves[] = { - &omap2420_l4_core__timer10, -}; - -/* timer10 hwmod */ -static struct omap_hwmod omap2420_timer10_hwmod = { - .name = "timer10", - .mpu_irqs = omap2_timer10_mpu_irqs, - .main_clk = "gpt10_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT10_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT, - }, - }, - .dev_attr = &capability_pwm_dev_attr, - .slaves = omap2420_timer10_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_timer10_slaves), - .class = &omap2xxx_timer_hwmod_class, +/* L4 CORE -> I2C2 interface */ +static struct omap_hwmod_ocp_if omap2420_l4_core__i2c2 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2420_i2c2_hwmod, + .clk = "i2c2_ick", + .addr = omap2_i2c2_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* timer11 */ -static struct omap_hwmod omap2420_timer11_hwmod; - -/* l4_core -> timer11 */ -static struct omap_hwmod_ocp_if omap2420_l4_core__timer11 = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_timer11_hwmod, - .clk = "gpt11_ick", - .addr = omap2_timer11_addrs, +/* IVA <- L3 interface */ +static struct omap_hwmod_ocp_if omap2420_l3__iva = { + .master = &omap2xxx_l3_main_hwmod, + .slave = &omap2420_iva_hwmod, + .clk = "core_l3_ck", .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* timer11 slave port */ -static struct omap_hwmod_ocp_if *omap2420_timer11_slaves[] = { - &omap2420_l4_core__timer11, +/* DSP <- L3 interface */ +static struct omap_hwmod_ocp_if omap2420_l3__dsp = { + .master = &omap2xxx_l3_main_hwmod, + .slave = &omap2420_dsp_hwmod, + .clk = "dsp_ick", + .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* timer11 hwmod */ -static struct omap_hwmod omap2420_timer11_hwmod = { - .name = "timer11", - .mpu_irqs = omap2_timer11_mpu_irqs, - .main_clk = "gpt11_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT11_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT, - }, +static struct omap_hwmod_addr_space omap2420_timer1_addrs[] = { + { + .pa_start = 0x48028000, + .pa_end = 0x48028000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT }, - .dev_attr = &capability_pwm_dev_attr, - .slaves = omap2420_timer11_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_timer11_slaves), - .class = &omap2xxx_timer_hwmod_class, + { } }; -/* timer12 */ -static struct omap_hwmod omap2420_timer12_hwmod; - -/* l4_core -> timer12 */ -static struct omap_hwmod_ocp_if omap2420_l4_core__timer12 = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_timer12_hwmod, - .clk = "gpt12_ick", - .addr = omap2xxx_timer12_addrs, +/* l4_wkup -> timer1 */ +static struct omap_hwmod_ocp_if omap2420_l4_wkup__timer1 = { + .master = &omap2xxx_l4_wkup_hwmod, + .slave = &omap2xxx_timer1_hwmod, + .clk = "gpt1_ick", + .addr = omap2420_timer1_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* timer12 slave port */ -static struct omap_hwmod_ocp_if *omap2420_timer12_slaves[] = { - &omap2420_l4_core__timer12, -}; - -/* timer12 hwmod */ -static struct omap_hwmod omap2420_timer12_hwmod = { - .name = "timer12", - .mpu_irqs = omap2xxx_timer12_mpu_irqs, - .main_clk = "gpt12_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT12_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT, - }, - }, - .dev_attr = &capability_pwm_dev_attr, - .slaves = omap2420_timer12_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_timer12_slaves), - .class = &omap2xxx_timer_hwmod_class, -}; - /* l4_wkup -> wd_timer2 */ static struct omap_hwmod_addr_space omap2420_wd_timer2_addrs[] = { { @@ -744,363 +306,13 @@ static struct omap_hwmod_addr_space omap2420_wd_timer2_addrs[] = { }; static struct omap_hwmod_ocp_if omap2420_l4_wkup__wd_timer2 = { - .master = &omap2420_l4_wkup_hwmod, - .slave = &omap2420_wd_timer2_hwmod, + .master = &omap2xxx_l4_wkup_hwmod, + .slave = &omap2xxx_wd_timer2_hwmod, .clk = "mpu_wdt_ick", .addr = omap2420_wd_timer2_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* wd_timer2 */ -static struct omap_hwmod_ocp_if *omap2420_wd_timer2_slaves[] = { - &omap2420_l4_wkup__wd_timer2, -}; - -static struct omap_hwmod omap2420_wd_timer2_hwmod = { - .name = "wd_timer2", - .class = &omap2xxx_wd_timer_hwmod_class, - .main_clk = "mpu_wdt_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_MPU_WDT_SHIFT, - .module_offs = WKUP_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT, - }, - }, - .slaves = omap2420_wd_timer2_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_wd_timer2_slaves), -}; - -/* UART1 */ - -static struct omap_hwmod_ocp_if *omap2420_uart1_slaves[] = { - &omap2_l4_core__uart1, -}; - -static struct omap_hwmod omap2420_uart1_hwmod = { - .name = "uart1", - .mpu_irqs = omap2_uart1_mpu_irqs, - .sdma_reqs = omap2_uart1_sdma_reqs, - .main_clk = "uart1_fck", - .prcm = { - .omap2 = { - .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_UART1_SHIFT, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT, - }, - }, - .slaves = omap2420_uart1_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_uart1_slaves), - .class = &omap2_uart_class, -}; - -/* UART2 */ - -static struct omap_hwmod_ocp_if *omap2420_uart2_slaves[] = { - &omap2_l4_core__uart2, -}; - -static struct omap_hwmod omap2420_uart2_hwmod = { - .name = "uart2", - .mpu_irqs = omap2_uart2_mpu_irqs, - .sdma_reqs = omap2_uart2_sdma_reqs, - .main_clk = "uart2_fck", - .prcm = { - .omap2 = { - .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_UART2_SHIFT, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT, - }, - }, - .slaves = omap2420_uart2_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_uart2_slaves), - .class = &omap2_uart_class, -}; - -/* UART3 */ - -static struct omap_hwmod_ocp_if *omap2420_uart3_slaves[] = { - &omap2_l4_core__uart3, -}; - -static struct omap_hwmod omap2420_uart3_hwmod = { - .name = "uart3", - .mpu_irqs = omap2_uart3_mpu_irqs, - .sdma_reqs = omap2_uart3_sdma_reqs, - .main_clk = "uart3_fck", - .prcm = { - .omap2 = { - .module_offs = CORE_MOD, - .prcm_reg_id = 2, - .module_bit = OMAP24XX_EN_UART3_SHIFT, - .idlest_reg_id = 2, - .idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT, - }, - }, - .slaves = omap2420_uart3_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_uart3_slaves), - .class = &omap2_uart_class, -}; - -/* dss */ -/* dss master ports */ -static struct omap_hwmod_ocp_if *omap2420_dss_masters[] = { - &omap2420_dss__l3, -}; - -/* l4_core -> dss */ -static struct omap_hwmod_ocp_if omap2420_l4_core__dss = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_dss_core_hwmod, - .clk = "dss_ick", - .addr = omap2_dss_addrs, - .fw = { - .omap2 = { - .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION, - .flags = OMAP_FIREWALL_L4, - } - }, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dss slave ports */ -static struct omap_hwmod_ocp_if *omap2420_dss_slaves[] = { - &omap2420_l4_core__dss, -}; - -static struct omap_hwmod_opt_clk dss_opt_clks[] = { - /* - * The DSS HW needs all DSS clocks enabled during reset. The dss_core - * driver does not use these clocks. - */ - { .role = "tv_clk", .clk = "dss_54m_fck" }, - { .role = "sys_clk", .clk = "dss2_fck" }, -}; - -static struct omap_hwmod omap2420_dss_core_hwmod = { - .name = "dss_core", - .class = &omap2_dss_hwmod_class, - .main_clk = "dss1_fck", /* instead of dss_fck */ - .sdma_reqs = omap2xxx_dss_sdma_chs, - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_DSS1_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT, - }, - }, - .opt_clks = dss_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), - .slaves = omap2420_dss_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_dss_slaves), - .masters = omap2420_dss_masters, - .masters_cnt = ARRAY_SIZE(omap2420_dss_masters), - .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET, -}; - -/* l4_core -> dss_dispc */ -static struct omap_hwmod_ocp_if omap2420_l4_core__dss_dispc = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_dss_dispc_hwmod, - .clk = "dss_ick", - .addr = omap2_dss_dispc_addrs, - .fw = { - .omap2 = { - .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_DISPC_REGION, - .flags = OMAP_FIREWALL_L4, - } - }, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dss_dispc slave ports */ -static struct omap_hwmod_ocp_if *omap2420_dss_dispc_slaves[] = { - &omap2420_l4_core__dss_dispc, -}; - -static struct omap_hwmod omap2420_dss_dispc_hwmod = { - .name = "dss_dispc", - .class = &omap2_dispc_hwmod_class, - .mpu_irqs = omap2_dispc_irqs, - .main_clk = "dss1_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_DSS1_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT, - }, - }, - .slaves = omap2420_dss_dispc_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_dss_dispc_slaves), - .flags = HWMOD_NO_IDLEST, - .dev_attr = &omap2_3_dss_dispc_dev_attr -}; - -/* l4_core -> dss_rfbi */ -static struct omap_hwmod_ocp_if omap2420_l4_core__dss_rfbi = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_dss_rfbi_hwmod, - .clk = "dss_ick", - .addr = omap2_dss_rfbi_addrs, - .fw = { - .omap2 = { - .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION, - .flags = OMAP_FIREWALL_L4, - } - }, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dss_rfbi slave ports */ -static struct omap_hwmod_ocp_if *omap2420_dss_rfbi_slaves[] = { - &omap2420_l4_core__dss_rfbi, -}; - -static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { - { .role = "ick", .clk = "dss_ick" }, -}; - -static struct omap_hwmod omap2420_dss_rfbi_hwmod = { - .name = "dss_rfbi", - .class = &omap2_rfbi_hwmod_class, - .main_clk = "dss1_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_DSS1_SHIFT, - .module_offs = CORE_MOD, - }, - }, - .opt_clks = dss_rfbi_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), - .slaves = omap2420_dss_rfbi_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves), - .flags = HWMOD_NO_IDLEST, -}; - -/* l4_core -> dss_venc */ -static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = { - .master = &omap2420_l4_core_hwmod, - .slave = &omap2420_dss_venc_hwmod, - .clk = "dss_ick", - .addr = omap2_dss_venc_addrs, - .fw = { - .omap2 = { - .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_VENC_REGION, - .flags = OMAP_FIREWALL_L4, - } - }, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dss_venc slave ports */ -static struct omap_hwmod_ocp_if *omap2420_dss_venc_slaves[] = { - &omap2420_l4_core__dss_venc, -}; - -static struct omap_hwmod omap2420_dss_venc_hwmod = { - .name = "dss_venc", - .class = &omap2_venc_hwmod_class, - .main_clk = "dss_54m_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_DSS1_SHIFT, - .module_offs = CORE_MOD, - }, - }, - .slaves = omap2420_dss_venc_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_dss_venc_slaves), - .flags = HWMOD_NO_IDLEST, -}; - -/* I2C common */ -static struct omap_hwmod_class_sysconfig i2c_sysc = { - .rev_offs = 0x00, - .sysc_offs = 0x20, - .syss_offs = 0x10, - .sysc_flags = (SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class i2c_class = { - .name = "i2c", - .sysc = &i2c_sysc, - .rev = OMAP_I2C_IP_VERSION_1, - .reset = &omap_i2c_reset, -}; - -static struct omap_i2c_dev_attr i2c_dev_attr = { - .flags = OMAP_I2C_FLAG_NO_FIFO | - OMAP_I2C_FLAG_SIMPLE_CLOCK | - OMAP_I2C_FLAG_16BIT_DATA_REG | - OMAP_I2C_FLAG_BUS_SHIFT_2, -}; - -/* I2C1 */ - -static struct omap_hwmod_ocp_if *omap2420_i2c1_slaves[] = { - &omap2420_l4_core__i2c1, -}; - -static struct omap_hwmod omap2420_i2c1_hwmod = { - .name = "i2c1", - .mpu_irqs = omap2_i2c1_mpu_irqs, - .sdma_reqs = omap2_i2c1_sdma_reqs, - .main_clk = "i2c1_fck", - .prcm = { - .omap2 = { - .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP2420_EN_I2C1_SHIFT, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP2420_ST_I2C1_SHIFT, - }, - }, - .slaves = omap2420_i2c1_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_i2c1_slaves), - .class = &i2c_class, - .dev_attr = &i2c_dev_attr, - .flags = HWMOD_16BIT_REG, -}; - -/* I2C2 */ - -static struct omap_hwmod_ocp_if *omap2420_i2c2_slaves[] = { - &omap2420_l4_core__i2c2, -}; - -static struct omap_hwmod omap2420_i2c2_hwmod = { - .name = "i2c2", - .mpu_irqs = omap2_i2c2_mpu_irqs, - .sdma_reqs = omap2_i2c2_sdma_reqs, - .main_clk = "i2c2_fck", - .prcm = { - .omap2 = { - .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP2420_EN_I2C2_SHIFT, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP2420_ST_I2C2_SHIFT, - }, - }, - .slaves = omap2420_i2c2_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_i2c2_slaves), - .class = &i2c_class, - .dev_attr = &i2c_dev_attr, - .flags = HWMOD_16BIT_REG, -}; - /* l4_wkup -> gpio1 */ static struct omap_hwmod_addr_space omap2420_gpio1_addr_space[] = { { @@ -1112,8 +324,8 @@ static struct omap_hwmod_addr_space omap2420_gpio1_addr_space[] = { }; static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio1 = { - .master = &omap2420_l4_wkup_hwmod, - .slave = &omap2420_gpio1_hwmod, + .master = &omap2xxx_l4_wkup_hwmod, + .slave = &omap2xxx_gpio1_hwmod, .clk = "gpios_ick", .addr = omap2420_gpio1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, @@ -1130,8 +342,8 @@ static struct omap_hwmod_addr_space omap2420_gpio2_addr_space[] = { }; static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio2 = { - .master = &omap2420_l4_wkup_hwmod, - .slave = &omap2420_gpio2_hwmod, + .master = &omap2xxx_l4_wkup_hwmod, + .slave = &omap2xxx_gpio2_hwmod, .clk = "gpios_ick", .addr = omap2420_gpio2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, @@ -1148,8 +360,8 @@ static struct omap_hwmod_addr_space omap2420_gpio3_addr_space[] = { }; static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio3 = { - .master = &omap2420_l4_wkup_hwmod, - .slave = &omap2420_gpio3_hwmod, + .master = &omap2xxx_l4_wkup_hwmod, + .slave = &omap2xxx_gpio3_hwmod, .clk = "gpios_ick", .addr = omap2420_gpio3_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, @@ -1166,408 +378,100 @@ static struct omap_hwmod_addr_space omap2420_gpio4_addr_space[] = { }; static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio4 = { - .master = &omap2420_l4_wkup_hwmod, - .slave = &omap2420_gpio4_hwmod, + .master = &omap2xxx_l4_wkup_hwmod, + .slave = &omap2xxx_gpio4_hwmod, .clk = "gpios_ick", .addr = omap2420_gpio4_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* gpio dev_attr */ -static struct omap_gpio_dev_attr gpio_dev_attr = { - .bank_width = 32, - .dbck_flag = false, -}; - -/* gpio1 */ -static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = { - &omap2420_l4_wkup__gpio1, -}; - -static struct omap_hwmod omap2420_gpio1_hwmod = { - .name = "gpio1", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap2_gpio1_irqs, - .main_clk = "gpios_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPIOS_SHIFT, - .module_offs = WKUP_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, - }, - }, - .slaves = omap2420_gpio1_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_gpio1_slaves), - .class = &omap2xxx_gpio_hwmod_class, - .dev_attr = &gpio_dev_attr, -}; - -/* gpio2 */ -static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = { - &omap2420_l4_wkup__gpio2, -}; - -static struct omap_hwmod omap2420_gpio2_hwmod = { - .name = "gpio2", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap2_gpio2_irqs, - .main_clk = "gpios_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPIOS_SHIFT, - .module_offs = WKUP_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, - }, - }, - .slaves = omap2420_gpio2_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_gpio2_slaves), - .class = &omap2xxx_gpio_hwmod_class, - .dev_attr = &gpio_dev_attr, -}; - -/* gpio3 */ -static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = { - &omap2420_l4_wkup__gpio3, -}; - -static struct omap_hwmod omap2420_gpio3_hwmod = { - .name = "gpio3", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap2_gpio3_irqs, - .main_clk = "gpios_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPIOS_SHIFT, - .module_offs = WKUP_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, - }, - }, - .slaves = omap2420_gpio3_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_gpio3_slaves), - .class = &omap2xxx_gpio_hwmod_class, - .dev_attr = &gpio_dev_attr, -}; - -/* gpio4 */ -static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = { - &omap2420_l4_wkup__gpio4, -}; - -static struct omap_hwmod omap2420_gpio4_hwmod = { - .name = "gpio4", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap2_gpio4_irqs, - .main_clk = "gpios_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPIOS_SHIFT, - .module_offs = WKUP_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, - }, - }, - .slaves = omap2420_gpio4_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_gpio4_slaves), - .class = &omap2xxx_gpio_hwmod_class, - .dev_attr = &gpio_dev_attr, -}; - -/* dma attributes */ -static struct omap_dma_dev_attr dma_dev_attr = { - .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY | - IS_CSSA_32 | IS_CDSA_32, - .lch_count = 32, -}; - /* dma_system -> L3 */ static struct omap_hwmod_ocp_if omap2420_dma_system__l3 = { .master = &omap2420_dma_system_hwmod, - .slave = &omap2420_l3_main_hwmod, + .slave = &omap2xxx_l3_main_hwmod, .clk = "core_l3_ck", .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* dma_system master ports */ -static struct omap_hwmod_ocp_if *omap2420_dma_system_masters[] = { - &omap2420_dma_system__l3, -}; - /* l4_core -> dma_system */ static struct omap_hwmod_ocp_if omap2420_l4_core__dma_system = { - .master = &omap2420_l4_core_hwmod, + .master = &omap2xxx_l4_core_hwmod, .slave = &omap2420_dma_system_hwmod, .clk = "sdma_ick", .addr = omap2_dma_system_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* dma_system slave ports */ -static struct omap_hwmod_ocp_if *omap2420_dma_system_slaves[] = { - &omap2420_l4_core__dma_system, -}; - -static struct omap_hwmod omap2420_dma_system_hwmod = { - .name = "dma", - .class = &omap2xxx_dma_hwmod_class, - .mpu_irqs = omap2_dma_system_irqs, - .main_clk = "core_l3_ck", - .slaves = omap2420_dma_system_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_dma_system_slaves), - .masters = omap2420_dma_system_masters, - .masters_cnt = ARRAY_SIZE(omap2420_dma_system_masters), - .dev_attr = &dma_dev_attr, - .flags = HWMOD_NO_IDLEST, -}; - -/* mailbox */ -static struct omap_hwmod omap2420_mailbox_hwmod; -static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = { - { .name = "dsp", .irq = 26 }, - { .name = "iva", .irq = 34 }, - { .irq = -1 } -}; - /* l4_core -> mailbox */ static struct omap_hwmod_ocp_if omap2420_l4_core__mailbox = { - .master = &omap2420_l4_core_hwmod, + .master = &omap2xxx_l4_core_hwmod, .slave = &omap2420_mailbox_hwmod, .addr = omap2_mailbox_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* mailbox slave ports */ -static struct omap_hwmod_ocp_if *omap2420_mailbox_slaves[] = { - &omap2420_l4_core__mailbox, -}; - -static struct omap_hwmod omap2420_mailbox_hwmod = { - .name = "mailbox", - .class = &omap2xxx_mailbox_hwmod_class, - .mpu_irqs = omap2420_mailbox_irqs, - .main_clk = "mailboxes_ick", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_MAILBOXES_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT, - }, - }, - .slaves = omap2420_mailbox_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_mailbox_slaves), -}; - -/* mcspi1 */ -static struct omap_hwmod_ocp_if *omap2420_mcspi1_slaves[] = { - &omap2420_l4_core__mcspi1, -}; - -static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = { - .num_chipselect = 4, -}; - -static struct omap_hwmod omap2420_mcspi1_hwmod = { - .name = "mcspi1_hwmod", - .mpu_irqs = omap2_mcspi1_mpu_irqs, - .sdma_reqs = omap2_mcspi1_sdma_reqs, - .main_clk = "mcspi1_fck", - .prcm = { - .omap2 = { - .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_MCSPI1_SHIFT, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_MCSPI1_SHIFT, - }, - }, - .slaves = omap2420_mcspi1_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_mcspi1_slaves), - .class = &omap2xxx_mcspi_class, - .dev_attr = &omap_mcspi1_dev_attr, -}; - -/* mcspi2 */ -static struct omap_hwmod_ocp_if *omap2420_mcspi2_slaves[] = { - &omap2420_l4_core__mcspi2, -}; - -static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = { - .num_chipselect = 2, -}; - -static struct omap_hwmod omap2420_mcspi2_hwmod = { - .name = "mcspi2_hwmod", - .mpu_irqs = omap2_mcspi2_mpu_irqs, - .sdma_reqs = omap2_mcspi2_sdma_reqs, - .main_clk = "mcspi2_fck", - .prcm = { - .omap2 = { - .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_MCSPI2_SHIFT, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_MCSPI2_SHIFT, - }, - }, - .slaves = omap2420_mcspi2_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_mcspi2_slaves), - .class = &omap2xxx_mcspi_class, - .dev_attr = &omap_mcspi2_dev_attr, -}; - -/* - * 'mcbsp' class - * multi channel buffered serial port controller - */ - -static struct omap_hwmod_class omap2420_mcbsp_hwmod_class = { - .name = "mcbsp", -}; - -/* mcbsp1 */ -static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = { - { .name = "tx", .irq = 59 }, - { .name = "rx", .irq = 60 }, - { .irq = -1 } -}; - /* l4_core -> mcbsp1 */ static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp1 = { - .master = &omap2420_l4_core_hwmod, + .master = &omap2xxx_l4_core_hwmod, .slave = &omap2420_mcbsp1_hwmod, .clk = "mcbsp1_ick", .addr = omap2_mcbsp1_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* mcbsp1 slave ports */ -static struct omap_hwmod_ocp_if *omap2420_mcbsp1_slaves[] = { - &omap2420_l4_core__mcbsp1, -}; - -static struct omap_hwmod omap2420_mcbsp1_hwmod = { - .name = "mcbsp1", - .class = &omap2420_mcbsp_hwmod_class, - .mpu_irqs = omap2420_mcbsp1_irqs, - .sdma_reqs = omap2_mcbsp1_sdma_reqs, - .main_clk = "mcbsp1_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_MCBSP1_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT, - }, - }, - .slaves = omap2420_mcbsp1_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_mcbsp1_slaves), -}; - -/* mcbsp2 */ -static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = { - { .name = "tx", .irq = 62 }, - { .name = "rx", .irq = 63 }, - { .irq = -1 } -}; - /* l4_core -> mcbsp2 */ static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp2 = { - .master = &omap2420_l4_core_hwmod, + .master = &omap2xxx_l4_core_hwmod, .slave = &omap2420_mcbsp2_hwmod, .clk = "mcbsp2_ick", .addr = omap2xxx_mcbsp2_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* mcbsp2 slave ports */ -static struct omap_hwmod_ocp_if *omap2420_mcbsp2_slaves[] = { +static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = { + &omap2xxx_l3_main__l4_core, + &omap2xxx_mpu__l3_main, + &omap2xxx_dss__l3, + &omap2xxx_l4_core__mcspi1, + &omap2xxx_l4_core__mcspi2, + &omap2xxx_l4_core__l4_wkup, + &omap2_l4_core__uart1, + &omap2_l4_core__uart2, + &omap2_l4_core__uart3, + &omap2420_l4_core__i2c1, + &omap2420_l4_core__i2c2, + &omap2420_l3__iva, + &omap2420_l3__dsp, + &omap2420_l4_wkup__timer1, + &omap2xxx_l4_core__timer2, + &omap2xxx_l4_core__timer3, + &omap2xxx_l4_core__timer4, + &omap2xxx_l4_core__timer5, + &omap2xxx_l4_core__timer6, + &omap2xxx_l4_core__timer7, + &omap2xxx_l4_core__timer8, + &omap2xxx_l4_core__timer9, + &omap2xxx_l4_core__timer10, + &omap2xxx_l4_core__timer11, + &omap2xxx_l4_core__timer12, + &omap2420_l4_wkup__wd_timer2, + &omap2xxx_l4_core__dss, + &omap2xxx_l4_core__dss_dispc, + &omap2xxx_l4_core__dss_rfbi, + &omap2xxx_l4_core__dss_venc, + &omap2420_l4_wkup__gpio1, + &omap2420_l4_wkup__gpio2, + &omap2420_l4_wkup__gpio3, + &omap2420_l4_wkup__gpio4, + &omap2420_dma_system__l3, + &omap2420_l4_core__dma_system, + &omap2420_l4_core__mailbox, + &omap2420_l4_core__mcbsp1, &omap2420_l4_core__mcbsp2, -}; - -static struct omap_hwmod omap2420_mcbsp2_hwmod = { - .name = "mcbsp2", - .class = &omap2420_mcbsp_hwmod_class, - .mpu_irqs = omap2420_mcbsp2_irqs, - .sdma_reqs = omap2_mcbsp2_sdma_reqs, - .main_clk = "mcbsp2_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_MCBSP2_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT, - }, - }, - .slaves = omap2420_mcbsp2_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_mcbsp2_slaves), -}; - -static __initdata struct omap_hwmod *omap2420_hwmods[] = { - &omap2420_l3_main_hwmod, - &omap2420_l4_core_hwmod, - &omap2420_l4_wkup_hwmod, - &omap2420_mpu_hwmod, - &omap2420_iva_hwmod, - - &omap2420_timer1_hwmod, - &omap2420_timer2_hwmod, - &omap2420_timer3_hwmod, - &omap2420_timer4_hwmod, - &omap2420_timer5_hwmod, - &omap2420_timer6_hwmod, - &omap2420_timer7_hwmod, - &omap2420_timer8_hwmod, - &omap2420_timer9_hwmod, - &omap2420_timer10_hwmod, - &omap2420_timer11_hwmod, - &omap2420_timer12_hwmod, - - &omap2420_wd_timer2_hwmod, - &omap2420_uart1_hwmod, - &omap2420_uart2_hwmod, - &omap2420_uart3_hwmod, - /* dss class */ - &omap2420_dss_core_hwmod, - &omap2420_dss_dispc_hwmod, - &omap2420_dss_rfbi_hwmod, - &omap2420_dss_venc_hwmod, - /* i2c class */ - &omap2420_i2c1_hwmod, - &omap2420_i2c2_hwmod, - - /* gpio class */ - &omap2420_gpio1_hwmod, - &omap2420_gpio2_hwmod, - &omap2420_gpio3_hwmod, - &omap2420_gpio4_hwmod, - - /* dma_system class*/ - &omap2420_dma_system_hwmod, - - /* mailbox class */ - &omap2420_mailbox_hwmod, - - /* mcbsp class */ - &omap2420_mcbsp1_hwmod, - &omap2420_mcbsp2_hwmod, - - /* mcspi class */ - &omap2420_mcspi1_hwmod, - &omap2420_mcspi2_hwmod, NULL, }; int __init omap2420_hwmod_init(void) { - return omap_hwmod_register(omap2420_hwmods); + return omap_hwmod_register_links(omap2420_hwmod_ocp_ifs); } diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 04a3885f4475..71d9f8824f9d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -2,6 +2,7 @@ * omap_hwmod_2430_data.c - hardware modules present on the OMAP2430 chips * * Copyright (C) 2009-2011 Nokia Corporation + * Copyright (C) 2012 Texas Instruments, Inc. * Paul Walmsley * * This program is free software; you can redistribute it and/or modify @@ -33,1044 +34,29 @@ /* * OMAP2430 hardware module integration data * - * ALl of the data in this section should be autogeneratable from the + * All of the data in this section should be autogeneratable from the * TI hardware database or other technical documentation. Data that * is driver-specific or driver-kernel integration-specific belongs * elsewhere. */ -static struct omap_hwmod omap2430_mpu_hwmod; -static struct omap_hwmod omap2430_iva_hwmod; -static struct omap_hwmod omap2430_l3_main_hwmod; -static struct omap_hwmod omap2430_l4_core_hwmod; -static struct omap_hwmod omap2430_dss_core_hwmod; -static struct omap_hwmod omap2430_dss_dispc_hwmod; -static struct omap_hwmod omap2430_dss_rfbi_hwmod; -static struct omap_hwmod omap2430_dss_venc_hwmod; -static struct omap_hwmod omap2430_wd_timer2_hwmod; -static struct omap_hwmod omap2430_gpio1_hwmod; -static struct omap_hwmod omap2430_gpio2_hwmod; -static struct omap_hwmod omap2430_gpio3_hwmod; -static struct omap_hwmod omap2430_gpio4_hwmod; -static struct omap_hwmod omap2430_gpio5_hwmod; -static struct omap_hwmod omap2430_dma_system_hwmod; -static struct omap_hwmod omap2430_mcbsp1_hwmod; -static struct omap_hwmod omap2430_mcbsp2_hwmod; -static struct omap_hwmod omap2430_mcbsp3_hwmod; -static struct omap_hwmod omap2430_mcbsp4_hwmod; -static struct omap_hwmod omap2430_mcbsp5_hwmod; -static struct omap_hwmod omap2430_mcspi1_hwmod; -static struct omap_hwmod omap2430_mcspi2_hwmod; -static struct omap_hwmod omap2430_mcspi3_hwmod; -static struct omap_hwmod omap2430_mmc1_hwmod; -static struct omap_hwmod omap2430_mmc2_hwmod; - -/* L3 -> L4_CORE interface */ -static struct omap_hwmod_ocp_if omap2430_l3_main__l4_core = { - .master = &omap2430_l3_main_hwmod, - .slave = &omap2430_l4_core_hwmod, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* MPU -> L3 interface */ -static struct omap_hwmod_ocp_if omap2430_mpu__l3_main = { - .master = &omap2430_mpu_hwmod, - .slave = &omap2430_l3_main_hwmod, - .user = OCP_USER_MPU, -}; - -/* Slave interfaces on the L3 interconnect */ -static struct omap_hwmod_ocp_if *omap2430_l3_main_slaves[] = { - &omap2430_mpu__l3_main, -}; - -/* DSS -> l3 */ -static struct omap_hwmod_ocp_if omap2430_dss__l3 = { - .master = &omap2430_dss_core_hwmod, - .slave = &omap2430_l3_main_hwmod, - .fw = { - .omap2 = { - .l3_perm_bit = OMAP2_L3_CORE_FW_CONNID_DSS, - .flags = OMAP_FIREWALL_L3, - } - }, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* Master interfaces on the L3 interconnect */ -static struct omap_hwmod_ocp_if *omap2430_l3_main_masters[] = { - &omap2430_l3_main__l4_core, -}; - -/* L3 */ -static struct omap_hwmod omap2430_l3_main_hwmod = { - .name = "l3_main", - .class = &l3_hwmod_class, - .masters = omap2430_l3_main_masters, - .masters_cnt = ARRAY_SIZE(omap2430_l3_main_masters), - .slaves = omap2430_l3_main_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_l3_main_slaves), - .flags = HWMOD_NO_IDLEST, -}; - -static struct omap_hwmod omap2430_l4_wkup_hwmod; -static struct omap_hwmod omap2430_uart1_hwmod; -static struct omap_hwmod omap2430_uart2_hwmod; -static struct omap_hwmod omap2430_uart3_hwmod; -static struct omap_hwmod omap2430_i2c1_hwmod; -static struct omap_hwmod omap2430_i2c2_hwmod; - -static struct omap_hwmod omap2430_usbhsotg_hwmod; - -/* l3_core -> usbhsotg interface */ -static struct omap_hwmod_ocp_if omap2430_usbhsotg__l3 = { - .master = &omap2430_usbhsotg_hwmod, - .slave = &omap2430_l3_main_hwmod, - .clk = "core_l3_ck", - .user = OCP_USER_MPU, -}; - -/* L4 CORE -> I2C1 interface */ -static struct omap_hwmod_ocp_if omap2430_l4_core__i2c1 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_i2c1_hwmod, - .clk = "i2c1_ick", - .addr = omap2_i2c1_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4 CORE -> I2C2 interface */ -static struct omap_hwmod_ocp_if omap2430_l4_core__i2c2 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_i2c2_hwmod, - .clk = "i2c2_ick", - .addr = omap2_i2c2_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4_CORE -> L4_WKUP interface */ -static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_l4_wkup_hwmod, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4 CORE -> UART1 interface */ -static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_uart1_hwmod, - .clk = "uart1_ick", - .addr = omap2xxx_uart1_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4 CORE -> UART2 interface */ -static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_uart2_hwmod, - .clk = "uart2_ick", - .addr = omap2xxx_uart2_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4 PER -> UART3 interface */ -static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_uart3_hwmod, - .clk = "uart3_ick", - .addr = omap2xxx_uart3_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* -* usbhsotg interface data -*/ -static struct omap_hwmod_addr_space omap2430_usbhsotg_addrs[] = { - { - .pa_start = OMAP243X_HS_BASE, - .pa_end = OMAP243X_HS_BASE + SZ_4K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_core ->usbhsotg interface */ -static struct omap_hwmod_ocp_if omap2430_l4_core__usbhsotg = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_usbhsotg_hwmod, - .clk = "usb_l4_ick", - .addr = omap2430_usbhsotg_addrs, - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if *omap2430_usbhsotg_masters[] = { - &omap2430_usbhsotg__l3, -}; - -static struct omap_hwmod_ocp_if *omap2430_usbhsotg_slaves[] = { - &omap2430_l4_core__usbhsotg, -}; - -/* L4 CORE -> MMC1 interface */ -static struct omap_hwmod_ocp_if omap2430_l4_core__mmc1 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_mmc1_hwmod, - .clk = "mmchs1_ick", - .addr = omap2430_mmc1_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4 CORE -> MMC2 interface */ -static struct omap_hwmod_ocp_if omap2430_l4_core__mmc2 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_mmc2_hwmod, - .clk = "mmchs2_ick", - .addr = omap2430_mmc2_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* Slave interfaces on the L4_CORE interconnect */ -static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = { - &omap2430_l3_main__l4_core, -}; - -/* Master interfaces on the L4_CORE interconnect */ -static struct omap_hwmod_ocp_if *omap2430_l4_core_masters[] = { - &omap2430_l4_core__l4_wkup, - &omap2430_l4_core__mmc1, - &omap2430_l4_core__mmc2, -}; - -/* L4 CORE */ -static struct omap_hwmod omap2430_l4_core_hwmod = { - .name = "l4_core", - .class = &l4_hwmod_class, - .masters = omap2430_l4_core_masters, - .masters_cnt = ARRAY_SIZE(omap2430_l4_core_masters), - .slaves = omap2430_l4_core_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_l4_core_slaves), - .flags = HWMOD_NO_IDLEST, -}; - -/* Slave interfaces on the L4_WKUP interconnect */ -static struct omap_hwmod_ocp_if *omap2430_l4_wkup_slaves[] = { - &omap2430_l4_core__l4_wkup, - &omap2_l4_core__uart1, - &omap2_l4_core__uart2, - &omap2_l4_core__uart3, -}; - -/* Master interfaces on the L4_WKUP interconnect */ -static struct omap_hwmod_ocp_if *omap2430_l4_wkup_masters[] = { -}; - -/* l4 core -> mcspi1 interface */ -static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi1 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_mcspi1_hwmod, - .clk = "mcspi1_ick", - .addr = omap2_mcspi1_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4 core -> mcspi2 interface */ -static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi2 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_mcspi2_hwmod, - .clk = "mcspi2_ick", - .addr = omap2_mcspi2_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4 core -> mcspi3 interface */ -static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi3 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_mcspi3_hwmod, - .clk = "mcspi3_ick", - .addr = omap2430_mcspi3_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4 WKUP */ -static struct omap_hwmod omap2430_l4_wkup_hwmod = { - .name = "l4_wkup", - .class = &l4_hwmod_class, - .masters = omap2430_l4_wkup_masters, - .masters_cnt = ARRAY_SIZE(omap2430_l4_wkup_masters), - .slaves = omap2430_l4_wkup_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_l4_wkup_slaves), - .flags = HWMOD_NO_IDLEST, -}; - -/* Master interfaces on the MPU device */ -static struct omap_hwmod_ocp_if *omap2430_mpu_masters[] = { - &omap2430_mpu__l3_main, -}; - -/* MPU */ -static struct omap_hwmod omap2430_mpu_hwmod = { - .name = "mpu", - .class = &mpu_hwmod_class, - .main_clk = "mpu_ck", - .masters = omap2430_mpu_masters, - .masters_cnt = ARRAY_SIZE(omap2430_mpu_masters), -}; - -/* - * IVA2_1 interface data + * IP blocks */ -/* IVA2 <- L3 interface */ -static struct omap_hwmod_ocp_if omap2430_l3__iva = { - .master = &omap2430_l3_main_hwmod, - .slave = &omap2430_iva_hwmod, - .clk = "dsp_fck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if *omap2430_iva_masters[] = { - &omap2430_l3__iva, +/* IVA2 (IVA2) */ +static struct omap_hwmod_rst_info omap2430_iva_resets[] = { + { .name = "logic", .rst_shift = 0 }, + { .name = "mmu", .rst_shift = 1 }, }; -/* - * IVA2 (IVA2) - */ - static struct omap_hwmod omap2430_iva_hwmod = { .name = "iva", .class = &iva_hwmod_class, - .masters = omap2430_iva_masters, - .masters_cnt = ARRAY_SIZE(omap2430_iva_masters), -}; - -/* always-on timers dev attribute */ -static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = { - .timer_capability = OMAP_TIMER_ALWON, -}; - -/* pwm timers dev attribute */ -static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = { - .timer_capability = OMAP_TIMER_HAS_PWM, -}; - -/* timer1 */ -static struct omap_hwmod omap2430_timer1_hwmod; - -static struct omap_hwmod_addr_space omap2430_timer1_addrs[] = { - { - .pa_start = 0x49018000, - .pa_end = 0x49018000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_wkup -> timer1 */ -static struct omap_hwmod_ocp_if omap2430_l4_wkup__timer1 = { - .master = &omap2430_l4_wkup_hwmod, - .slave = &omap2430_timer1_hwmod, - .clk = "gpt1_ick", - .addr = omap2430_timer1_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer1 slave port */ -static struct omap_hwmod_ocp_if *omap2430_timer1_slaves[] = { - &omap2430_l4_wkup__timer1, -}; - -/* timer1 hwmod */ -static struct omap_hwmod omap2430_timer1_hwmod = { - .name = "timer1", - .mpu_irqs = omap2_timer1_mpu_irqs, - .main_clk = "gpt1_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT1_SHIFT, - .module_offs = WKUP_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT, - }, - }, - .dev_attr = &capability_alwon_dev_attr, - .slaves = omap2430_timer1_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_timer1_slaves), - .class = &omap2xxx_timer_hwmod_class, -}; - -/* timer2 */ -static struct omap_hwmod omap2430_timer2_hwmod; - -/* l4_core -> timer2 */ -static struct omap_hwmod_ocp_if omap2430_l4_core__timer2 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_timer2_hwmod, - .clk = "gpt2_ick", - .addr = omap2xxx_timer2_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer2 slave port */ -static struct omap_hwmod_ocp_if *omap2430_timer2_slaves[] = { - &omap2430_l4_core__timer2, -}; - -/* timer2 hwmod */ -static struct omap_hwmod omap2430_timer2_hwmod = { - .name = "timer2", - .mpu_irqs = omap2_timer2_mpu_irqs, - .main_clk = "gpt2_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT2_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT, - }, - }, - .dev_attr = &capability_alwon_dev_attr, - .slaves = omap2430_timer2_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_timer2_slaves), - .class = &omap2xxx_timer_hwmod_class, -}; - -/* timer3 */ -static struct omap_hwmod omap2430_timer3_hwmod; - -/* l4_core -> timer3 */ -static struct omap_hwmod_ocp_if omap2430_l4_core__timer3 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_timer3_hwmod, - .clk = "gpt3_ick", - .addr = omap2xxx_timer3_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer3 slave port */ -static struct omap_hwmod_ocp_if *omap2430_timer3_slaves[] = { - &omap2430_l4_core__timer3, -}; - -/* timer3 hwmod */ -static struct omap_hwmod omap2430_timer3_hwmod = { - .name = "timer3", - .mpu_irqs = omap2_timer3_mpu_irqs, - .main_clk = "gpt3_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT3_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT, - }, - }, - .dev_attr = &capability_alwon_dev_attr, - .slaves = omap2430_timer3_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_timer3_slaves), - .class = &omap2xxx_timer_hwmod_class, -}; - -/* timer4 */ -static struct omap_hwmod omap2430_timer4_hwmod; - -/* l4_core -> timer4 */ -static struct omap_hwmod_ocp_if omap2430_l4_core__timer4 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_timer4_hwmod, - .clk = "gpt4_ick", - .addr = omap2xxx_timer4_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer4 slave port */ -static struct omap_hwmod_ocp_if *omap2430_timer4_slaves[] = { - &omap2430_l4_core__timer4, -}; - -/* timer4 hwmod */ -static struct omap_hwmod omap2430_timer4_hwmod = { - .name = "timer4", - .mpu_irqs = omap2_timer4_mpu_irqs, - .main_clk = "gpt4_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT4_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT, - }, - }, - .dev_attr = &capability_alwon_dev_attr, - .slaves = omap2430_timer4_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_timer4_slaves), - .class = &omap2xxx_timer_hwmod_class, -}; - -/* timer5 */ -static struct omap_hwmod omap2430_timer5_hwmod; - -/* l4_core -> timer5 */ -static struct omap_hwmod_ocp_if omap2430_l4_core__timer5 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_timer5_hwmod, - .clk = "gpt5_ick", - .addr = omap2xxx_timer5_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer5 slave port */ -static struct omap_hwmod_ocp_if *omap2430_timer5_slaves[] = { - &omap2430_l4_core__timer5, -}; - -/* timer5 hwmod */ -static struct omap_hwmod omap2430_timer5_hwmod = { - .name = "timer5", - .mpu_irqs = omap2_timer5_mpu_irqs, - .main_clk = "gpt5_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT5_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT, - }, - }, - .dev_attr = &capability_alwon_dev_attr, - .slaves = omap2430_timer5_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_timer5_slaves), - .class = &omap2xxx_timer_hwmod_class, -}; - -/* timer6 */ -static struct omap_hwmod omap2430_timer6_hwmod; - -/* l4_core -> timer6 */ -static struct omap_hwmod_ocp_if omap2430_l4_core__timer6 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_timer6_hwmod, - .clk = "gpt6_ick", - .addr = omap2xxx_timer6_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer6 slave port */ -static struct omap_hwmod_ocp_if *omap2430_timer6_slaves[] = { - &omap2430_l4_core__timer6, -}; - -/* timer6 hwmod */ -static struct omap_hwmod omap2430_timer6_hwmod = { - .name = "timer6", - .mpu_irqs = omap2_timer6_mpu_irqs, - .main_clk = "gpt6_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT6_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT, - }, - }, - .dev_attr = &capability_alwon_dev_attr, - .slaves = omap2430_timer6_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_timer6_slaves), - .class = &omap2xxx_timer_hwmod_class, -}; - -/* timer7 */ -static struct omap_hwmod omap2430_timer7_hwmod; - -/* l4_core -> timer7 */ -static struct omap_hwmod_ocp_if omap2430_l4_core__timer7 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_timer7_hwmod, - .clk = "gpt7_ick", - .addr = omap2xxx_timer7_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer7 slave port */ -static struct omap_hwmod_ocp_if *omap2430_timer7_slaves[] = { - &omap2430_l4_core__timer7, -}; - -/* timer7 hwmod */ -static struct omap_hwmod omap2430_timer7_hwmod = { - .name = "timer7", - .mpu_irqs = omap2_timer7_mpu_irqs, - .main_clk = "gpt7_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT7_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT, - }, - }, - .dev_attr = &capability_alwon_dev_attr, - .slaves = omap2430_timer7_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_timer7_slaves), - .class = &omap2xxx_timer_hwmod_class, -}; - -/* timer8 */ -static struct omap_hwmod omap2430_timer8_hwmod; - -/* l4_core -> timer8 */ -static struct omap_hwmod_ocp_if omap2430_l4_core__timer8 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_timer8_hwmod, - .clk = "gpt8_ick", - .addr = omap2xxx_timer8_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer8 slave port */ -static struct omap_hwmod_ocp_if *omap2430_timer8_slaves[] = { - &omap2430_l4_core__timer8, -}; - -/* timer8 hwmod */ -static struct omap_hwmod omap2430_timer8_hwmod = { - .name = "timer8", - .mpu_irqs = omap2_timer8_mpu_irqs, - .main_clk = "gpt8_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT8_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT, - }, - }, - .dev_attr = &capability_alwon_dev_attr, - .slaves = omap2430_timer8_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_timer8_slaves), - .class = &omap2xxx_timer_hwmod_class, -}; - -/* timer9 */ -static struct omap_hwmod omap2430_timer9_hwmod; - -/* l4_core -> timer9 */ -static struct omap_hwmod_ocp_if omap2430_l4_core__timer9 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_timer9_hwmod, - .clk = "gpt9_ick", - .addr = omap2xxx_timer9_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer9 slave port */ -static struct omap_hwmod_ocp_if *omap2430_timer9_slaves[] = { - &omap2430_l4_core__timer9, -}; - -/* timer9 hwmod */ -static struct omap_hwmod omap2430_timer9_hwmod = { - .name = "timer9", - .mpu_irqs = omap2_timer9_mpu_irqs, - .main_clk = "gpt9_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT9_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT, - }, - }, - .dev_attr = &capability_pwm_dev_attr, - .slaves = omap2430_timer9_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_timer9_slaves), - .class = &omap2xxx_timer_hwmod_class, -}; - -/* timer10 */ -static struct omap_hwmod omap2430_timer10_hwmod; - -/* l4_core -> timer10 */ -static struct omap_hwmod_ocp_if omap2430_l4_core__timer10 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_timer10_hwmod, - .clk = "gpt10_ick", - .addr = omap2_timer10_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer10 slave port */ -static struct omap_hwmod_ocp_if *omap2430_timer10_slaves[] = { - &omap2430_l4_core__timer10, -}; - -/* timer10 hwmod */ -static struct omap_hwmod omap2430_timer10_hwmod = { - .name = "timer10", - .mpu_irqs = omap2_timer10_mpu_irqs, - .main_clk = "gpt10_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT10_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT, - }, - }, - .dev_attr = &capability_pwm_dev_attr, - .slaves = omap2430_timer10_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_timer10_slaves), - .class = &omap2xxx_timer_hwmod_class, -}; - -/* timer11 */ -static struct omap_hwmod omap2430_timer11_hwmod; - -/* l4_core -> timer11 */ -static struct omap_hwmod_ocp_if omap2430_l4_core__timer11 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_timer11_hwmod, - .clk = "gpt11_ick", - .addr = omap2_timer11_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer11 slave port */ -static struct omap_hwmod_ocp_if *omap2430_timer11_slaves[] = { - &omap2430_l4_core__timer11, -}; - -/* timer11 hwmod */ -static struct omap_hwmod omap2430_timer11_hwmod = { - .name = "timer11", - .mpu_irqs = omap2_timer11_mpu_irqs, - .main_clk = "gpt11_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT11_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT, - }, - }, - .dev_attr = &capability_pwm_dev_attr, - .slaves = omap2430_timer11_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_timer11_slaves), - .class = &omap2xxx_timer_hwmod_class, -}; - -/* timer12 */ -static struct omap_hwmod omap2430_timer12_hwmod; - -/* l4_core -> timer12 */ -static struct omap_hwmod_ocp_if omap2430_l4_core__timer12 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_timer12_hwmod, - .clk = "gpt12_ick", - .addr = omap2xxx_timer12_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer12 slave port */ -static struct omap_hwmod_ocp_if *omap2430_timer12_slaves[] = { - &omap2430_l4_core__timer12, -}; - -/* timer12 hwmod */ -static struct omap_hwmod omap2430_timer12_hwmod = { - .name = "timer12", - .mpu_irqs = omap2xxx_timer12_mpu_irqs, - .main_clk = "gpt12_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPT12_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT, - }, - }, - .dev_attr = &capability_pwm_dev_attr, - .slaves = omap2430_timer12_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_timer12_slaves), - .class = &omap2xxx_timer_hwmod_class, -}; - -/* l4_wkup -> wd_timer2 */ -static struct omap_hwmod_addr_space omap2430_wd_timer2_addrs[] = { - { - .pa_start = 0x49016000, - .pa_end = 0x4901607f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if omap2430_l4_wkup__wd_timer2 = { - .master = &omap2430_l4_wkup_hwmod, - .slave = &omap2430_wd_timer2_hwmod, - .clk = "mpu_wdt_ick", - .addr = omap2430_wd_timer2_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* wd_timer2 */ -static struct omap_hwmod_ocp_if *omap2430_wd_timer2_slaves[] = { - &omap2430_l4_wkup__wd_timer2, -}; - -static struct omap_hwmod omap2430_wd_timer2_hwmod = { - .name = "wd_timer2", - .class = &omap2xxx_wd_timer_hwmod_class, - .main_clk = "mpu_wdt_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_MPU_WDT_SHIFT, - .module_offs = WKUP_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT, - }, - }, - .slaves = omap2430_wd_timer2_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_wd_timer2_slaves), -}; - -/* UART1 */ - -static struct omap_hwmod_ocp_if *omap2430_uart1_slaves[] = { - &omap2_l4_core__uart1, -}; - -static struct omap_hwmod omap2430_uart1_hwmod = { - .name = "uart1", - .mpu_irqs = omap2_uart1_mpu_irqs, - .sdma_reqs = omap2_uart1_sdma_reqs, - .main_clk = "uart1_fck", - .prcm = { - .omap2 = { - .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_UART1_SHIFT, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT, - }, - }, - .slaves = omap2430_uart1_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_uart1_slaves), - .class = &omap2_uart_class, -}; - -/* UART2 */ - -static struct omap_hwmod_ocp_if *omap2430_uart2_slaves[] = { - &omap2_l4_core__uart2, -}; - -static struct omap_hwmod omap2430_uart2_hwmod = { - .name = "uart2", - .mpu_irqs = omap2_uart2_mpu_irqs, - .sdma_reqs = omap2_uart2_sdma_reqs, - .main_clk = "uart2_fck", - .prcm = { - .omap2 = { - .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_UART2_SHIFT, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT, - }, - }, - .slaves = omap2430_uart2_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_uart2_slaves), - .class = &omap2_uart_class, -}; - -/* UART3 */ - -static struct omap_hwmod_ocp_if *omap2430_uart3_slaves[] = { - &omap2_l4_core__uart3, -}; - -static struct omap_hwmod omap2430_uart3_hwmod = { - .name = "uart3", - .mpu_irqs = omap2_uart3_mpu_irqs, - .sdma_reqs = omap2_uart3_sdma_reqs, - .main_clk = "uart3_fck", - .prcm = { - .omap2 = { - .module_offs = CORE_MOD, - .prcm_reg_id = 2, - .module_bit = OMAP24XX_EN_UART3_SHIFT, - .idlest_reg_id = 2, - .idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT, - }, - }, - .slaves = omap2430_uart3_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_uart3_slaves), - .class = &omap2_uart_class, -}; - -/* dss */ -/* dss master ports */ -static struct omap_hwmod_ocp_if *omap2430_dss_masters[] = { - &omap2430_dss__l3, -}; - -/* l4_core -> dss */ -static struct omap_hwmod_ocp_if omap2430_l4_core__dss = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_dss_core_hwmod, - .clk = "dss_ick", - .addr = omap2_dss_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dss slave ports */ -static struct omap_hwmod_ocp_if *omap2430_dss_slaves[] = { - &omap2430_l4_core__dss, -}; - -static struct omap_hwmod_opt_clk dss_opt_clks[] = { - /* - * The DSS HW needs all DSS clocks enabled during reset. The dss_core - * driver does not use these clocks. - */ - { .role = "tv_clk", .clk = "dss_54m_fck" }, - { .role = "sys_clk", .clk = "dss2_fck" }, -}; - -static struct omap_hwmod omap2430_dss_core_hwmod = { - .name = "dss_core", - .class = &omap2_dss_hwmod_class, - .main_clk = "dss1_fck", /* instead of dss_fck */ - .sdma_reqs = omap2xxx_dss_sdma_chs, - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_DSS1_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT, - }, - }, - .opt_clks = dss_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), - .slaves = omap2430_dss_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_dss_slaves), - .masters = omap2430_dss_masters, - .masters_cnt = ARRAY_SIZE(omap2430_dss_masters), - .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET, -}; - -/* l4_core -> dss_dispc */ -static struct omap_hwmod_ocp_if omap2430_l4_core__dss_dispc = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_dss_dispc_hwmod, - .clk = "dss_ick", - .addr = omap2_dss_dispc_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dss_dispc slave ports */ -static struct omap_hwmod_ocp_if *omap2430_dss_dispc_slaves[] = { - &omap2430_l4_core__dss_dispc, -}; - -static struct omap_hwmod omap2430_dss_dispc_hwmod = { - .name = "dss_dispc", - .class = &omap2_dispc_hwmod_class, - .mpu_irqs = omap2_dispc_irqs, - .main_clk = "dss1_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_DSS1_SHIFT, - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT, - }, - }, - .slaves = omap2430_dss_dispc_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_dss_dispc_slaves), - .flags = HWMOD_NO_IDLEST, - .dev_attr = &omap2_3_dss_dispc_dev_attr -}; - -/* l4_core -> dss_rfbi */ -static struct omap_hwmod_ocp_if omap2430_l4_core__dss_rfbi = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_dss_rfbi_hwmod, - .clk = "dss_ick", - .addr = omap2_dss_rfbi_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dss_rfbi slave ports */ -static struct omap_hwmod_ocp_if *omap2430_dss_rfbi_slaves[] = { - &omap2430_l4_core__dss_rfbi, -}; - -static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { - { .role = "ick", .clk = "dss_ick" }, -}; - -static struct omap_hwmod omap2430_dss_rfbi_hwmod = { - .name = "dss_rfbi", - .class = &omap2_rfbi_hwmod_class, - .main_clk = "dss1_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_DSS1_SHIFT, - .module_offs = CORE_MOD, - }, - }, - .opt_clks = dss_rfbi_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), - .slaves = omap2430_dss_rfbi_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves), - .flags = HWMOD_NO_IDLEST, -}; - -/* l4_core -> dss_venc */ -static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_dss_venc_hwmod, - .clk = "dss_ick", - .addr = omap2_dss_venc_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dss_venc slave ports */ -static struct omap_hwmod_ocp_if *omap2430_dss_venc_slaves[] = { - &omap2430_l4_core__dss_venc, -}; - -static struct omap_hwmod omap2430_dss_venc_hwmod = { - .name = "dss_venc", - .class = &omap2_venc_hwmod_class, - .main_clk = "dss_54m_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_DSS1_SHIFT, - .module_offs = CORE_MOD, - }, - }, - .slaves = omap2430_dss_venc_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_dss_venc_slaves), - .flags = HWMOD_NO_IDLEST, + .clkdm_name = "dsp_clkdm", + .rst_lines = omap2430_iva_resets, + .rst_lines_cnt = ARRAY_SIZE(omap2430_iva_resets), + .main_clk = "dsp_fck", }; /* I2C common */ @@ -1098,11 +84,6 @@ static struct omap_i2c_dev_attr i2c_dev_attr = { }; /* I2C1 */ - -static struct omap_hwmod_ocp_if *omap2430_i2c1_slaves[] = { - &omap2430_l4_core__i2c1, -}; - static struct omap_hwmod omap2430_i2c1_hwmod = { .name = "i2c1", .flags = HWMOD_16BIT_REG, @@ -1126,18 +107,11 @@ static struct omap_hwmod omap2430_i2c1_hwmod = { .idlest_idle_bit = OMAP2430_ST_I2CHS1_SHIFT, }, }, - .slaves = omap2430_i2c1_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_i2c1_slaves), .class = &i2c_class, .dev_attr = &i2c_dev_attr, }; /* I2C2 */ - -static struct omap_hwmod_ocp_if *omap2430_i2c2_slaves[] = { - &omap2430_l4_core__i2c2, -}; - static struct omap_hwmod omap2430_i2c2_hwmod = { .name = "i2c2", .flags = HWMOD_16BIT_REG, @@ -1153,218 +127,16 @@ static struct omap_hwmod omap2430_i2c2_hwmod = { .idlest_idle_bit = OMAP2430_ST_I2CHS2_SHIFT, }, }, - .slaves = omap2430_i2c2_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_i2c2_slaves), .class = &i2c_class, .dev_attr = &i2c_dev_attr, }; -/* l4_wkup -> gpio1 */ -static struct omap_hwmod_addr_space omap2430_gpio1_addr_space[] = { - { - .pa_start = 0x4900C000, - .pa_end = 0x4900C1ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio1 = { - .master = &omap2430_l4_wkup_hwmod, - .slave = &omap2430_gpio1_hwmod, - .clk = "gpios_ick", - .addr = omap2430_gpio1_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_wkup -> gpio2 */ -static struct omap_hwmod_addr_space omap2430_gpio2_addr_space[] = { - { - .pa_start = 0x4900E000, - .pa_end = 0x4900E1ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio2 = { - .master = &omap2430_l4_wkup_hwmod, - .slave = &omap2430_gpio2_hwmod, - .clk = "gpios_ick", - .addr = omap2430_gpio2_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_wkup -> gpio3 */ -static struct omap_hwmod_addr_space omap2430_gpio3_addr_space[] = { - { - .pa_start = 0x49010000, - .pa_end = 0x490101ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio3 = { - .master = &omap2430_l4_wkup_hwmod, - .slave = &omap2430_gpio3_hwmod, - .clk = "gpios_ick", - .addr = omap2430_gpio3_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_wkup -> gpio4 */ -static struct omap_hwmod_addr_space omap2430_gpio4_addr_space[] = { - { - .pa_start = 0x49012000, - .pa_end = 0x490121ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio4 = { - .master = &omap2430_l4_wkup_hwmod, - .slave = &omap2430_gpio4_hwmod, - .clk = "gpios_ick", - .addr = omap2430_gpio4_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_core -> gpio5 */ -static struct omap_hwmod_addr_space omap2430_gpio5_addr_space[] = { - { - .pa_start = 0x480B6000, - .pa_end = 0x480B61ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_gpio5_hwmod, - .clk = "gpio5_ick", - .addr = omap2430_gpio5_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* gpio dev_attr */ -static struct omap_gpio_dev_attr gpio_dev_attr = { - .bank_width = 32, - .dbck_flag = false, -}; - -/* gpio1 */ -static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = { - &omap2430_l4_wkup__gpio1, -}; - -static struct omap_hwmod omap2430_gpio1_hwmod = { - .name = "gpio1", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap2_gpio1_irqs, - .main_clk = "gpios_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPIOS_SHIFT, - .module_offs = WKUP_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_EN_GPIOS_SHIFT, - }, - }, - .slaves = omap2430_gpio1_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_gpio1_slaves), - .class = &omap2xxx_gpio_hwmod_class, - .dev_attr = &gpio_dev_attr, -}; - -/* gpio2 */ -static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = { - &omap2430_l4_wkup__gpio2, -}; - -static struct omap_hwmod omap2430_gpio2_hwmod = { - .name = "gpio2", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap2_gpio2_irqs, - .main_clk = "gpios_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPIOS_SHIFT, - .module_offs = WKUP_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, - }, - }, - .slaves = omap2430_gpio2_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_gpio2_slaves), - .class = &omap2xxx_gpio_hwmod_class, - .dev_attr = &gpio_dev_attr, -}; - -/* gpio3 */ -static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = { - &omap2430_l4_wkup__gpio3, -}; - -static struct omap_hwmod omap2430_gpio3_hwmod = { - .name = "gpio3", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap2_gpio3_irqs, - .main_clk = "gpios_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPIOS_SHIFT, - .module_offs = WKUP_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, - }, - }, - .slaves = omap2430_gpio3_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_gpio3_slaves), - .class = &omap2xxx_gpio_hwmod_class, - .dev_attr = &gpio_dev_attr, -}; - -/* gpio4 */ -static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = { - &omap2430_l4_wkup__gpio4, -}; - -static struct omap_hwmod omap2430_gpio4_hwmod = { - .name = "gpio4", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap2_gpio4_irqs, - .main_clk = "gpios_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_GPIOS_SHIFT, - .module_offs = WKUP_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, - }, - }, - .slaves = omap2430_gpio4_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_gpio4_slaves), - .class = &omap2xxx_gpio_hwmod_class, - .dev_attr = &gpio_dev_attr, -}; - /* gpio5 */ static struct omap_hwmod_irq_info omap243x_gpio5_irqs[] = { { .irq = 33 }, /* INT_24XX_GPIO_BANK5 */ { .irq = -1 } }; -static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = { - &omap2430_l4_core__gpio5, -}; - static struct omap_hwmod omap2430_gpio5_hwmod = { .name = "gpio5", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, @@ -1379,10 +151,8 @@ static struct omap_hwmod omap2430_gpio5_hwmod = { .idlest_idle_bit = OMAP2430_ST_GPIO5_SHIFT, }, }, - .slaves = omap2430_gpio5_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_gpio5_slaves), .class = &omap2xxx_gpio_hwmod_class, - .dev_attr = &gpio_dev_attr, + .dev_attr = &omap2xxx_gpio_dev_attr, }; /* dma attributes */ @@ -1392,66 +162,21 @@ static struct omap_dma_dev_attr dma_dev_attr = { .lch_count = 32, }; -/* dma_system -> L3 */ -static struct omap_hwmod_ocp_if omap2430_dma_system__l3 = { - .master = &omap2430_dma_system_hwmod, - .slave = &omap2430_l3_main_hwmod, - .clk = "core_l3_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dma_system master ports */ -static struct omap_hwmod_ocp_if *omap2430_dma_system_masters[] = { - &omap2430_dma_system__l3, -}; - -/* l4_core -> dma_system */ -static struct omap_hwmod_ocp_if omap2430_l4_core__dma_system = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_dma_system_hwmod, - .clk = "sdma_ick", - .addr = omap2_dma_system_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dma_system slave ports */ -static struct omap_hwmod_ocp_if *omap2430_dma_system_slaves[] = { - &omap2430_l4_core__dma_system, -}; - static struct omap_hwmod omap2430_dma_system_hwmod = { .name = "dma", .class = &omap2xxx_dma_hwmod_class, .mpu_irqs = omap2_dma_system_irqs, .main_clk = "core_l3_ck", - .slaves = omap2430_dma_system_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_dma_system_slaves), - .masters = omap2430_dma_system_masters, - .masters_cnt = ARRAY_SIZE(omap2430_dma_system_masters), .dev_attr = &dma_dev_attr, .flags = HWMOD_NO_IDLEST, }; /* mailbox */ -static struct omap_hwmod omap2430_mailbox_hwmod; static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = { { .irq = 26 }, { .irq = -1 } }; -/* l4_core -> mailbox */ -static struct omap_hwmod_ocp_if omap2430_l4_core__mailbox = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_mailbox_hwmod, - .addr = omap2_mailbox_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mailbox slave ports */ -static struct omap_hwmod_ocp_if *omap2430_mailbox_slaves[] = { - &omap2430_l4_core__mailbox, -}; - static struct omap_hwmod omap2430_mailbox_hwmod = { .name = "mailbox", .class = &omap2xxx_mailbox_hwmod_class, @@ -1466,66 +191,6 @@ static struct omap_hwmod omap2430_mailbox_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT, }, }, - .slaves = omap2430_mailbox_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_mailbox_slaves), -}; - -/* mcspi1 */ -static struct omap_hwmod_ocp_if *omap2430_mcspi1_slaves[] = { - &omap2430_l4_core__mcspi1, -}; - -static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = { - .num_chipselect = 4, -}; - -static struct omap_hwmod omap2430_mcspi1_hwmod = { - .name = "mcspi1_hwmod", - .mpu_irqs = omap2_mcspi1_mpu_irqs, - .sdma_reqs = omap2_mcspi1_sdma_reqs, - .main_clk = "mcspi1_fck", - .prcm = { - .omap2 = { - .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_MCSPI1_SHIFT, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_MCSPI1_SHIFT, - }, - }, - .slaves = omap2430_mcspi1_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_mcspi1_slaves), - .class = &omap2xxx_mcspi_class, - .dev_attr = &omap_mcspi1_dev_attr, -}; - -/* mcspi2 */ -static struct omap_hwmod_ocp_if *omap2430_mcspi2_slaves[] = { - &omap2430_l4_core__mcspi2, -}; - -static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = { - .num_chipselect = 2, -}; - -static struct omap_hwmod omap2430_mcspi2_hwmod = { - .name = "mcspi2_hwmod", - .mpu_irqs = omap2_mcspi2_mpu_irqs, - .sdma_reqs = omap2_mcspi2_sdma_reqs, - .main_clk = "mcspi2_fck", - .prcm = { - .omap2 = { - .module_offs = CORE_MOD, - .prcm_reg_id = 1, - .module_bit = OMAP24XX_EN_MCSPI2_SHIFT, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP24XX_ST_MCSPI2_SHIFT, - }, - }, - .slaves = omap2430_mcspi2_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_mcspi2_slaves), - .class = &omap2xxx_mcspi_class, - .dev_attr = &omap_mcspi2_dev_attr, }; /* mcspi3 */ @@ -1542,16 +207,12 @@ static struct omap_hwmod_dma_info omap2430_mcspi3_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_ocp_if *omap2430_mcspi3_slaves[] = { - &omap2430_l4_core__mcspi3, -}; - static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = { .num_chipselect = 2, }; static struct omap_hwmod omap2430_mcspi3_hwmod = { - .name = "mcspi3_hwmod", + .name = "mcspi3", .mpu_irqs = omap2430_mcspi3_mpu_irqs, .sdma_reqs = omap2430_mcspi3_sdma_reqs, .main_clk = "mcspi3_fck", @@ -1564,15 +225,11 @@ static struct omap_hwmod omap2430_mcspi3_hwmod = { .idlest_idle_bit = OMAP2430_ST_MCSPI3_SHIFT, }, }, - .slaves = omap2430_mcspi3_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_mcspi3_slaves), .class = &omap2xxx_mcspi_class, .dev_attr = &omap_mcspi3_dev_attr, }; -/* - * usbhsotg - */ +/* usbhsotg */ static struct omap_hwmod_class_sysconfig omap2430_usbhsotg_sysc = { .rev_offs = 0x0400, .sysc_offs = 0x0404, @@ -1611,10 +268,6 @@ static struct omap_hwmod omap2430_usbhsotg_hwmod = { .idlest_idle_bit = OMAP2430_ST_USBHS_SHIFT, }, }, - .masters = omap2430_usbhsotg_masters, - .masters_cnt = ARRAY_SIZE(omap2430_usbhsotg_masters), - .slaves = omap2430_usbhsotg_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_usbhsotg_slaves), .class = &usbotg_class, /* * Erratum ID: i479 idle_req / idle_ack mechanism potentially @@ -1652,20 +305,6 @@ static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = { { .irq = -1 } }; -/* l4_core -> mcbsp1 */ -static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp1 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_mcbsp1_hwmod, - .clk = "mcbsp1_ick", - .addr = omap2_mcbsp1_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mcbsp1 slave ports */ -static struct omap_hwmod_ocp_if *omap2430_mcbsp1_slaves[] = { - &omap2430_l4_core__mcbsp1, -}; - static struct omap_hwmod omap2430_mcbsp1_hwmod = { .name = "mcbsp1", .class = &omap2430_mcbsp_hwmod_class, @@ -1681,8 +320,6 @@ static struct omap_hwmod omap2430_mcbsp1_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT, }, }, - .slaves = omap2430_mcbsp1_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp1_slaves), }; /* mcbsp2 */ @@ -1693,20 +330,6 @@ static struct omap_hwmod_irq_info omap2430_mcbsp2_irqs[] = { { .irq = -1 } }; -/* l4_core -> mcbsp2 */ -static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp2 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_mcbsp2_hwmod, - .clk = "mcbsp2_ick", - .addr = omap2xxx_mcbsp2_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mcbsp2 slave ports */ -static struct omap_hwmod_ocp_if *omap2430_mcbsp2_slaves[] = { - &omap2430_l4_core__mcbsp2, -}; - static struct omap_hwmod omap2430_mcbsp2_hwmod = { .name = "mcbsp2", .class = &omap2430_mcbsp_hwmod_class, @@ -1722,8 +345,6 @@ static struct omap_hwmod omap2430_mcbsp2_hwmod = { .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT, }, }, - .slaves = omap2430_mcbsp2_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp2_slaves), }; /* mcbsp3 */ @@ -1734,30 +355,6 @@ static struct omap_hwmod_irq_info omap2430_mcbsp3_irqs[] = { { .irq = -1 } }; -static struct omap_hwmod_addr_space omap2430_mcbsp3_addrs[] = { - { - .name = "mpu", - .pa_start = 0x4808C000, - .pa_end = 0x4808C0ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_core -> mcbsp3 */ -static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp3 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_mcbsp3_hwmod, - .clk = "mcbsp3_ick", - .addr = omap2430_mcbsp3_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mcbsp3 slave ports */ -static struct omap_hwmod_ocp_if *omap2430_mcbsp3_slaves[] = { - &omap2430_l4_core__mcbsp3, -}; - static struct omap_hwmod omap2430_mcbsp3_hwmod = { .name = "mcbsp3", .class = &omap2430_mcbsp_hwmod_class, @@ -1773,8 +370,6 @@ static struct omap_hwmod omap2430_mcbsp3_hwmod = { .idlest_idle_bit = OMAP2430_ST_MCBSP3_SHIFT, }, }, - .slaves = omap2430_mcbsp3_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp3_slaves), }; /* mcbsp4 */ @@ -1791,30 +386,6 @@ static struct omap_hwmod_dma_info omap2430_mcbsp4_sdma_chs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap2430_mcbsp4_addrs[] = { - { - .name = "mpu", - .pa_start = 0x4808E000, - .pa_end = 0x4808E0ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_core -> mcbsp4 */ -static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp4 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_mcbsp4_hwmod, - .clk = "mcbsp4_ick", - .addr = omap2430_mcbsp4_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mcbsp4 slave ports */ -static struct omap_hwmod_ocp_if *omap2430_mcbsp4_slaves[] = { - &omap2430_l4_core__mcbsp4, -}; - static struct omap_hwmod omap2430_mcbsp4_hwmod = { .name = "mcbsp4", .class = &omap2430_mcbsp_hwmod_class, @@ -1830,8 +401,6 @@ static struct omap_hwmod omap2430_mcbsp4_hwmod = { .idlest_idle_bit = OMAP2430_ST_MCBSP4_SHIFT, }, }, - .slaves = omap2430_mcbsp4_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp4_slaves), }; /* mcbsp5 */ @@ -1848,30 +417,6 @@ static struct omap_hwmod_dma_info omap2430_mcbsp5_sdma_chs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap2430_mcbsp5_addrs[] = { - { - .name = "mpu", - .pa_start = 0x48096000, - .pa_end = 0x480960ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_core -> mcbsp5 */ -static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp5 = { - .master = &omap2430_l4_core_hwmod, - .slave = &omap2430_mcbsp5_hwmod, - .clk = "mcbsp5_ick", - .addr = omap2430_mcbsp5_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mcbsp5 slave ports */ -static struct omap_hwmod_ocp_if *omap2430_mcbsp5_slaves[] = { - &omap2430_l4_core__mcbsp5, -}; - static struct omap_hwmod omap2430_mcbsp5_hwmod = { .name = "mcbsp5", .class = &omap2430_mcbsp_hwmod_class, @@ -1887,12 +432,9 @@ static struct omap_hwmod omap2430_mcbsp5_hwmod = { .idlest_idle_bit = OMAP2430_ST_MCBSP5_SHIFT, }, }, - .slaves = omap2430_mcbsp5_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp5_slaves), }; /* MMC/SD/SDIO common */ - static struct omap_hwmod_class_sysconfig omap2430_mmc_sysc = { .rev_offs = 0x1fc, .sysc_offs = 0x10, @@ -1910,7 +452,6 @@ static struct omap_hwmod_class omap2430_mmc_class = { }; /* MMC/SD/SDIO1 */ - static struct omap_hwmod_irq_info omap2430_mmc1_mpu_irqs[] = { { .irq = 83 }, { .irq = -1 } @@ -1926,10 +467,6 @@ static struct omap_hwmod_opt_clk omap2430_mmc1_opt_clks[] = { { .role = "dbck", .clk = "mmchsdb1_fck" }, }; -static struct omap_hwmod_ocp_if *omap2430_mmc1_slaves[] = { - &omap2430_l4_core__mmc1, -}; - static struct omap_mmc_dev_attr mmc1_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; @@ -1952,13 +489,10 @@ static struct omap_hwmod omap2430_mmc1_hwmod = { }, }, .dev_attr = &mmc1_dev_attr, - .slaves = omap2430_mmc1_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_mmc1_slaves), .class = &omap2430_mmc_class, }; /* MMC/SD/SDIO2 */ - static struct omap_hwmod_irq_info omap2430_mmc2_mpu_irqs[] = { { .irq = 86 }, { .irq = -1 } @@ -1974,10 +508,6 @@ static struct omap_hwmod_opt_clk omap2430_mmc2_opt_clks[] = { { .role = "dbck", .clk = "mmchsdb2_fck" }, }; -static struct omap_hwmod_ocp_if *omap2430_mmc2_slaves[] = { - &omap2430_l4_core__mmc2, -}; - static struct omap_hwmod omap2430_mmc2_hwmod = { .name = "mmc2", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, @@ -1995,78 +525,371 @@ static struct omap_hwmod omap2430_mmc2_hwmod = { .idlest_idle_bit = OMAP2430_ST_MMCHS2_SHIFT, }, }, - .slaves = omap2430_mmc2_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_mmc2_slaves), .class = &omap2430_mmc_class, }; -static __initdata struct omap_hwmod *omap2430_hwmods[] = { - &omap2430_l3_main_hwmod, - &omap2430_l4_core_hwmod, - &omap2430_l4_wkup_hwmod, - &omap2430_mpu_hwmod, - &omap2430_iva_hwmod, - - &omap2430_timer1_hwmod, - &omap2430_timer2_hwmod, - &omap2430_timer3_hwmod, - &omap2430_timer4_hwmod, - &omap2430_timer5_hwmod, - &omap2430_timer6_hwmod, - &omap2430_timer7_hwmod, - &omap2430_timer8_hwmod, - &omap2430_timer9_hwmod, - &omap2430_timer10_hwmod, - &omap2430_timer11_hwmod, - &omap2430_timer12_hwmod, - - &omap2430_wd_timer2_hwmod, - &omap2430_uart1_hwmod, - &omap2430_uart2_hwmod, - &omap2430_uart3_hwmod, - /* dss class */ - &omap2430_dss_core_hwmod, - &omap2430_dss_dispc_hwmod, - &omap2430_dss_rfbi_hwmod, - &omap2430_dss_venc_hwmod, - /* i2c class */ - &omap2430_i2c1_hwmod, - &omap2430_i2c2_hwmod, - &omap2430_mmc1_hwmod, - &omap2430_mmc2_hwmod, - - /* gpio class */ - &omap2430_gpio1_hwmod, - &omap2430_gpio2_hwmod, - &omap2430_gpio3_hwmod, - &omap2430_gpio4_hwmod, - &omap2430_gpio5_hwmod, - - /* dma_system class*/ - &omap2430_dma_system_hwmod, - - /* mcbsp class */ - &omap2430_mcbsp1_hwmod, - &omap2430_mcbsp2_hwmod, - &omap2430_mcbsp3_hwmod, - &omap2430_mcbsp4_hwmod, - &omap2430_mcbsp5_hwmod, - - /* mailbox class */ - &omap2430_mailbox_hwmod, - - /* mcspi class */ - &omap2430_mcspi1_hwmod, - &omap2430_mcspi2_hwmod, - &omap2430_mcspi3_hwmod, - - /* usbotg class*/ - &omap2430_usbhsotg_hwmod, +/* + * interfaces + */ + +/* L3 -> L4_CORE interface */ +/* l3_core -> usbhsotg interface */ +static struct omap_hwmod_ocp_if omap2430_usbhsotg__l3 = { + .master = &omap2430_usbhsotg_hwmod, + .slave = &omap2xxx_l3_main_hwmod, + .clk = "core_l3_ck", + .user = OCP_USER_MPU, +}; + +/* L4 CORE -> I2C1 interface */ +static struct omap_hwmod_ocp_if omap2430_l4_core__i2c1 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2430_i2c1_hwmod, + .clk = "i2c1_ick", + .addr = omap2_i2c1_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 CORE -> I2C2 interface */ +static struct omap_hwmod_ocp_if omap2430_l4_core__i2c2 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2430_i2c2_hwmod, + .clk = "i2c2_ick", + .addr = omap2_i2c2_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap2430_usbhsotg_addrs[] = { + { + .pa_start = OMAP243X_HS_BASE, + .pa_end = OMAP243X_HS_BASE + SZ_4K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_core ->usbhsotg interface */ +static struct omap_hwmod_ocp_if omap2430_l4_core__usbhsotg = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2430_usbhsotg_hwmod, + .clk = "usb_l4_ick", + .addr = omap2430_usbhsotg_addrs, + .user = OCP_USER_MPU, +}; + +/* L4 CORE -> MMC1 interface */ +static struct omap_hwmod_ocp_if omap2430_l4_core__mmc1 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2430_mmc1_hwmod, + .clk = "mmchs1_ick", + .addr = omap2430_mmc1_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 CORE -> MMC2 interface */ +static struct omap_hwmod_ocp_if omap2430_l4_core__mmc2 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2430_mmc2_hwmod, + .clk = "mmchs2_ick", + .addr = omap2430_mmc2_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 core -> mcspi3 interface */ +static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi3 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2430_mcspi3_hwmod, + .clk = "mcspi3_ick", + .addr = omap2430_mcspi3_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* IVA2 <- L3 interface */ +static struct omap_hwmod_ocp_if omap2430_l3__iva = { + .master = &omap2xxx_l3_main_hwmod, + .slave = &omap2430_iva_hwmod, + .clk = "core_l3_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap2430_timer1_addrs[] = { + { + .pa_start = 0x49018000, + .pa_end = 0x49018000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_wkup -> timer1 */ +static struct omap_hwmod_ocp_if omap2430_l4_wkup__timer1 = { + .master = &omap2xxx_l4_wkup_hwmod, + .slave = &omap2xxx_timer1_hwmod, + .clk = "gpt1_ick", + .addr = omap2430_timer1_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; +/* l4_wkup -> wd_timer2 */ +static struct omap_hwmod_addr_space omap2430_wd_timer2_addrs[] = { + { + .pa_start = 0x49016000, + .pa_end = 0x4901607f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap2430_l4_wkup__wd_timer2 = { + .master = &omap2xxx_l4_wkup_hwmod, + .slave = &omap2xxx_wd_timer2_hwmod, + .clk = "mpu_wdt_ick", + .addr = omap2430_wd_timer2_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup -> gpio1 */ +static struct omap_hwmod_addr_space omap2430_gpio1_addr_space[] = { + { + .pa_start = 0x4900C000, + .pa_end = 0x4900C1ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio1 = { + .master = &omap2xxx_l4_wkup_hwmod, + .slave = &omap2xxx_gpio1_hwmod, + .clk = "gpios_ick", + .addr = omap2430_gpio1_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup -> gpio2 */ +static struct omap_hwmod_addr_space omap2430_gpio2_addr_space[] = { + { + .pa_start = 0x4900E000, + .pa_end = 0x4900E1ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio2 = { + .master = &omap2xxx_l4_wkup_hwmod, + .slave = &omap2xxx_gpio2_hwmod, + .clk = "gpios_ick", + .addr = omap2430_gpio2_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup -> gpio3 */ +static struct omap_hwmod_addr_space omap2430_gpio3_addr_space[] = { + { + .pa_start = 0x49010000, + .pa_end = 0x490101ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio3 = { + .master = &omap2xxx_l4_wkup_hwmod, + .slave = &omap2xxx_gpio3_hwmod, + .clk = "gpios_ick", + .addr = omap2430_gpio3_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup -> gpio4 */ +static struct omap_hwmod_addr_space omap2430_gpio4_addr_space[] = { + { + .pa_start = 0x49012000, + .pa_end = 0x490121ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio4 = { + .master = &omap2xxx_l4_wkup_hwmod, + .slave = &omap2xxx_gpio4_hwmod, + .clk = "gpios_ick", + .addr = omap2430_gpio4_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> gpio5 */ +static struct omap_hwmod_addr_space omap2430_gpio5_addr_space[] = { + { + .pa_start = 0x480B6000, + .pa_end = 0x480B61ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2430_gpio5_hwmod, + .clk = "gpio5_ick", + .addr = omap2430_gpio5_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dma_system -> L3 */ +static struct omap_hwmod_ocp_if omap2430_dma_system__l3 = { + .master = &omap2430_dma_system_hwmod, + .slave = &omap2xxx_l3_main_hwmod, + .clk = "core_l3_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> dma_system */ +static struct omap_hwmod_ocp_if omap2430_l4_core__dma_system = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2430_dma_system_hwmod, + .clk = "sdma_ick", + .addr = omap2_dma_system_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> mailbox */ +static struct omap_hwmod_ocp_if omap2430_l4_core__mailbox = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2430_mailbox_hwmod, + .addr = omap2_mailbox_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> mcbsp1 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp1 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2430_mcbsp1_hwmod, + .clk = "mcbsp1_ick", + .addr = omap2_mcbsp1_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> mcbsp2 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp2 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2430_mcbsp2_hwmod, + .clk = "mcbsp2_ick", + .addr = omap2xxx_mcbsp2_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap2430_mcbsp3_addrs[] = { + { + .name = "mpu", + .pa_start = 0x4808C000, + .pa_end = 0x4808C0ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_core -> mcbsp3 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp3 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2430_mcbsp3_hwmod, + .clk = "mcbsp3_ick", + .addr = omap2430_mcbsp3_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap2430_mcbsp4_addrs[] = { + { + .name = "mpu", + .pa_start = 0x4808E000, + .pa_end = 0x4808E0ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_core -> mcbsp4 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp4 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2430_mcbsp4_hwmod, + .clk = "mcbsp4_ick", + .addr = omap2430_mcbsp4_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap2430_mcbsp5_addrs[] = { + { + .name = "mpu", + .pa_start = 0x48096000, + .pa_end = 0x480960ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_core -> mcbsp5 */ +static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp5 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2430_mcbsp5_hwmod, + .clk = "mcbsp5_ick", + .addr = omap2430_mcbsp5_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = { + &omap2xxx_l3_main__l4_core, + &omap2xxx_mpu__l3_main, + &omap2xxx_dss__l3, + &omap2430_usbhsotg__l3, + &omap2430_l4_core__i2c1, + &omap2430_l4_core__i2c2, + &omap2xxx_l4_core__l4_wkup, + &omap2_l4_core__uart1, + &omap2_l4_core__uart2, + &omap2_l4_core__uart3, + &omap2430_l4_core__usbhsotg, + &omap2430_l4_core__mmc1, + &omap2430_l4_core__mmc2, + &omap2xxx_l4_core__mcspi1, + &omap2xxx_l4_core__mcspi2, + &omap2430_l4_core__mcspi3, + &omap2430_l3__iva, + &omap2430_l4_wkup__timer1, + &omap2xxx_l4_core__timer2, + &omap2xxx_l4_core__timer3, + &omap2xxx_l4_core__timer4, + &omap2xxx_l4_core__timer5, + &omap2xxx_l4_core__timer6, + &omap2xxx_l4_core__timer7, + &omap2xxx_l4_core__timer8, + &omap2xxx_l4_core__timer9, + &omap2xxx_l4_core__timer10, + &omap2xxx_l4_core__timer11, + &omap2xxx_l4_core__timer12, + &omap2430_l4_wkup__wd_timer2, + &omap2xxx_l4_core__dss, + &omap2xxx_l4_core__dss_dispc, + &omap2xxx_l4_core__dss_rfbi, + &omap2xxx_l4_core__dss_venc, + &omap2430_l4_wkup__gpio1, + &omap2430_l4_wkup__gpio2, + &omap2430_l4_wkup__gpio3, + &omap2430_l4_wkup__gpio4, + &omap2430_l4_core__gpio5, + &omap2430_dma_system__l3, + &omap2430_l4_core__dma_system, + &omap2430_l4_core__mailbox, + &omap2430_l4_core__mcbsp1, + &omap2430_l4_core__mcbsp2, + &omap2430_l4_core__mcbsp3, + &omap2430_l4_core__mcbsp4, + &omap2430_l4_core__mcbsp5, NULL, }; int __init omap2430_hwmod_init(void) { - return omap_hwmod_register(omap2430_hwmods); + return omap_hwmod_register_links(omap2430_hwmod_ocp_ifs); } diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c index 4f3547c2a49e..5178e40e84f9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c @@ -15,10 +15,12 @@ #include <plat/omap_hwmod.h> #include <plat/serial.h> +#include <plat/l3_2xxx.h> +#include <plat/l4_2xxx.h> #include "omap_hwmod_common_data.h" -struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[] = { +static struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[] = { { .pa_start = OMAP2_UART1_BASE, .pa_end = OMAP2_UART1_BASE + SZ_8K - 1, @@ -27,7 +29,7 @@ struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[] = { { } }; -struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[] = { +static struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[] = { { .pa_start = OMAP2_UART2_BASE, .pa_end = OMAP2_UART2_BASE + SZ_1K - 1, @@ -36,7 +38,7 @@ struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[] = { { } }; -struct omap_hwmod_addr_space omap2xxx_uart3_addr_space[] = { +static struct omap_hwmod_addr_space omap2xxx_uart3_addr_space[] = { { .pa_start = OMAP2_UART3_BASE, .pa_end = OMAP2_UART3_BASE + SZ_1K - 1, @@ -45,7 +47,7 @@ struct omap_hwmod_addr_space omap2xxx_uart3_addr_space[] = { { } }; -struct omap_hwmod_addr_space omap2xxx_timer2_addrs[] = { +static struct omap_hwmod_addr_space omap2xxx_timer2_addrs[] = { { .pa_start = 0x4802a000, .pa_end = 0x4802a000 + SZ_1K - 1, @@ -54,7 +56,7 @@ struct omap_hwmod_addr_space omap2xxx_timer2_addrs[] = { { } }; -struct omap_hwmod_addr_space omap2xxx_timer3_addrs[] = { +static struct omap_hwmod_addr_space omap2xxx_timer3_addrs[] = { { .pa_start = 0x48078000, .pa_end = 0x48078000 + SZ_1K - 1, @@ -63,7 +65,7 @@ struct omap_hwmod_addr_space omap2xxx_timer3_addrs[] = { { } }; -struct omap_hwmod_addr_space omap2xxx_timer4_addrs[] = { +static struct omap_hwmod_addr_space omap2xxx_timer4_addrs[] = { { .pa_start = 0x4807a000, .pa_end = 0x4807a000 + SZ_1K - 1, @@ -72,7 +74,7 @@ struct omap_hwmod_addr_space omap2xxx_timer4_addrs[] = { { } }; -struct omap_hwmod_addr_space omap2xxx_timer5_addrs[] = { +static struct omap_hwmod_addr_space omap2xxx_timer5_addrs[] = { { .pa_start = 0x4807c000, .pa_end = 0x4807c000 + SZ_1K - 1, @@ -81,7 +83,7 @@ struct omap_hwmod_addr_space omap2xxx_timer5_addrs[] = { { } }; -struct omap_hwmod_addr_space omap2xxx_timer6_addrs[] = { +static struct omap_hwmod_addr_space omap2xxx_timer6_addrs[] = { { .pa_start = 0x4807e000, .pa_end = 0x4807e000 + SZ_1K - 1, @@ -90,7 +92,7 @@ struct omap_hwmod_addr_space omap2xxx_timer6_addrs[] = { { } }; -struct omap_hwmod_addr_space omap2xxx_timer7_addrs[] = { +static struct omap_hwmod_addr_space omap2xxx_timer7_addrs[] = { { .pa_start = 0x48080000, .pa_end = 0x48080000 + SZ_1K - 1, @@ -99,7 +101,7 @@ struct omap_hwmod_addr_space omap2xxx_timer7_addrs[] = { { } }; -struct omap_hwmod_addr_space omap2xxx_timer8_addrs[] = { +static struct omap_hwmod_addr_space omap2xxx_timer8_addrs[] = { { .pa_start = 0x48082000, .pa_end = 0x48082000 + SZ_1K - 1, @@ -108,7 +110,7 @@ struct omap_hwmod_addr_space omap2xxx_timer8_addrs[] = { { } }; -struct omap_hwmod_addr_space omap2xxx_timer9_addrs[] = { +static struct omap_hwmod_addr_space omap2xxx_timer9_addrs[] = { { .pa_start = 0x48084000, .pa_end = 0x48084000 + SZ_1K - 1, @@ -127,4 +129,246 @@ struct omap_hwmod_addr_space omap2xxx_mcbsp2_addrs[] = { { } }; +/* + * Common interconnect data + */ + +/* L3 -> L4_CORE interface */ +struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core = { + .master = &omap2xxx_l3_main_hwmod, + .slave = &omap2xxx_l4_core_hwmod, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* MPU -> L3 interface */ +struct omap_hwmod_ocp_if omap2xxx_mpu__l3_main = { + .master = &omap2xxx_mpu_hwmod, + .slave = &omap2xxx_l3_main_hwmod, + .user = OCP_USER_MPU, +}; + +/* DSS -> l3 */ +struct omap_hwmod_ocp_if omap2xxx_dss__l3 = { + .master = &omap2xxx_dss_core_hwmod, + .slave = &omap2xxx_l3_main_hwmod, + .fw = { + .omap2 = { + .l3_perm_bit = OMAP2_L3_CORE_FW_CONNID_DSS, + .flags = OMAP_FIREWALL_L3, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4_CORE -> L4_WKUP interface */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__l4_wkup = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_l4_wkup_hwmod, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 CORE -> UART1 interface */ +struct omap_hwmod_ocp_if omap2_l4_core__uart1 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_uart1_hwmod, + .clk = "uart1_ick", + .addr = omap2xxx_uart1_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 CORE -> UART2 interface */ +struct omap_hwmod_ocp_if omap2_l4_core__uart2 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_uart2_hwmod, + .clk = "uart2_ick", + .addr = omap2xxx_uart2_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 PER -> UART3 interface */ +struct omap_hwmod_ocp_if omap2_l4_core__uart3 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_uart3_hwmod, + .clk = "uart3_ick", + .addr = omap2xxx_uart3_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 core -> mcspi1 interface */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi1 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_mcspi1_hwmod, + .clk = "mcspi1_ick", + .addr = omap2_mcspi1_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 core -> mcspi2 interface */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi2 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_mcspi2_hwmod, + .clk = "mcspi2_ick", + .addr = omap2_mcspi2_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> timer2 */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__timer2 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_timer2_hwmod, + .clk = "gpt2_ick", + .addr = omap2xxx_timer2_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> timer3 */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__timer3 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_timer3_hwmod, + .clk = "gpt3_ick", + .addr = omap2xxx_timer3_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> timer4 */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__timer4 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_timer4_hwmod, + .clk = "gpt4_ick", + .addr = omap2xxx_timer4_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> timer5 */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__timer5 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_timer5_hwmod, + .clk = "gpt5_ick", + .addr = omap2xxx_timer5_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> timer6 */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__timer6 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_timer6_hwmod, + .clk = "gpt6_ick", + .addr = omap2xxx_timer6_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> timer7 */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__timer7 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_timer7_hwmod, + .clk = "gpt7_ick", + .addr = omap2xxx_timer7_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> timer8 */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__timer8 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_timer8_hwmod, + .clk = "gpt8_ick", + .addr = omap2xxx_timer8_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> timer9 */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__timer9 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_timer9_hwmod, + .clk = "gpt9_ick", + .addr = omap2xxx_timer9_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> timer10 */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__timer10 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_timer10_hwmod, + .clk = "gpt10_ick", + .addr = omap2_timer10_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> timer11 */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__timer11 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_timer11_hwmod, + .clk = "gpt11_ick", + .addr = omap2_timer11_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> timer12 */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__timer12 = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_timer12_hwmod, + .clk = "gpt12_ick", + .addr = omap2xxx_timer12_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> dss */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__dss = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_dss_core_hwmod, + .clk = "dss_ick", + .addr = omap2_dss_addrs, + .fw = { + .omap2 = { + .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> dss_dispc */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_dss_dispc_hwmod, + .clk = "dss_ick", + .addr = omap2_dss_dispc_addrs, + .fw = { + .omap2 = { + .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_DISPC_REGION, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> dss_rfbi */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_dss_rfbi_hwmod, + .clk = "dss_ick", + .addr = omap2_dss_rfbi_addrs, + .fw = { + .omap2 = { + .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> dss_venc */ +struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc = { + .master = &omap2xxx_l4_core_hwmod, + .slave = &omap2xxx_dss_venc_hwmod, + .clk = "dss_ick", + .addr = omap2_dss_venc_addrs, + .fw = { + .omap2 = { + .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_VENC_REGION, + .flags = OMAP_FIREWALL_L4, + } + }, + .flags = OCPIF_SWSUP_IDLE, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 2a6729741b06..45aaa07e3025 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -10,6 +10,7 @@ */ #include <plat/omap_hwmod.h> #include <plat/serial.h> +#include <plat/gpio.h> #include <plat/dma.h> #include <plat/dmtimer.h> #include <plat/mcspi.h> @@ -17,6 +18,8 @@ #include <mach/irqs.h> #include "omap_hwmod_common_data.h" +#include "cm-regbits-24xx.h" +#include "prm-regbits-24xx.h" #include "wd_timer.h" struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[] = { @@ -170,3 +173,562 @@ struct omap_hwmod_class omap2xxx_mcspi_class = { .sysc = &omap2xxx_mcspi_sysc, .rev = OMAP2_MCSPI_REV, }; + +/* + * IP blocks + */ + +/* L3 */ +struct omap_hwmod omap2xxx_l3_main_hwmod = { + .name = "l3_main", + .class = &l3_hwmod_class, + .flags = HWMOD_NO_IDLEST, +}; + +/* L4 CORE */ +struct omap_hwmod omap2xxx_l4_core_hwmod = { + .name = "l4_core", + .class = &l4_hwmod_class, + .flags = HWMOD_NO_IDLEST, +}; + +/* L4 WKUP */ +struct omap_hwmod omap2xxx_l4_wkup_hwmod = { + .name = "l4_wkup", + .class = &l4_hwmod_class, + .flags = HWMOD_NO_IDLEST, +}; + +/* MPU */ +struct omap_hwmod omap2xxx_mpu_hwmod = { + .name = "mpu", + .class = &mpu_hwmod_class, + .main_clk = "mpu_ck", +}; + +/* IVA2 */ +struct omap_hwmod omap2xxx_iva_hwmod = { + .name = "iva", + .class = &iva_hwmod_class, +}; + +/* always-on timers dev attribute */ +static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = { + .timer_capability = OMAP_TIMER_ALWON, +}; + +/* pwm timers dev attribute */ +static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = { + .timer_capability = OMAP_TIMER_HAS_PWM, +}; + +/* timer1 */ + +struct omap_hwmod omap2xxx_timer1_hwmod = { + .name = "timer1", + .mpu_irqs = omap2_timer1_mpu_irqs, + .main_clk = "gpt1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT1_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT, + }, + }, + .dev_attr = &capability_alwon_dev_attr, + .class = &omap2xxx_timer_hwmod_class, +}; + +/* timer2 */ + +struct omap_hwmod omap2xxx_timer2_hwmod = { + .name = "timer2", + .mpu_irqs = omap2_timer2_mpu_irqs, + .main_clk = "gpt2_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT2_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT, + }, + }, + .dev_attr = &capability_alwon_dev_attr, + .class = &omap2xxx_timer_hwmod_class, +}; + +/* timer3 */ + +struct omap_hwmod omap2xxx_timer3_hwmod = { + .name = "timer3", + .mpu_irqs = omap2_timer3_mpu_irqs, + .main_clk = "gpt3_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT3_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT, + }, + }, + .dev_attr = &capability_alwon_dev_attr, + .class = &omap2xxx_timer_hwmod_class, +}; + +/* timer4 */ + +struct omap_hwmod omap2xxx_timer4_hwmod = { + .name = "timer4", + .mpu_irqs = omap2_timer4_mpu_irqs, + .main_clk = "gpt4_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT4_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT, + }, + }, + .dev_attr = &capability_alwon_dev_attr, + .class = &omap2xxx_timer_hwmod_class, +}; + +/* timer5 */ + +struct omap_hwmod omap2xxx_timer5_hwmod = { + .name = "timer5", + .mpu_irqs = omap2_timer5_mpu_irqs, + .main_clk = "gpt5_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT5_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT, + }, + }, + .dev_attr = &capability_alwon_dev_attr, + .class = &omap2xxx_timer_hwmod_class, +}; + +/* timer6 */ + +struct omap_hwmod omap2xxx_timer6_hwmod = { + .name = "timer6", + .mpu_irqs = omap2_timer6_mpu_irqs, + .main_clk = "gpt6_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT6_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT, + }, + }, + .dev_attr = &capability_alwon_dev_attr, + .class = &omap2xxx_timer_hwmod_class, +}; + +/* timer7 */ + +struct omap_hwmod omap2xxx_timer7_hwmod = { + .name = "timer7", + .mpu_irqs = omap2_timer7_mpu_irqs, + .main_clk = "gpt7_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT7_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT, + }, + }, + .dev_attr = &capability_alwon_dev_attr, + .class = &omap2xxx_timer_hwmod_class, +}; + +/* timer8 */ + +struct omap_hwmod omap2xxx_timer8_hwmod = { + .name = "timer8", + .mpu_irqs = omap2_timer8_mpu_irqs, + .main_clk = "gpt8_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT8_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT, + }, + }, + .dev_attr = &capability_alwon_dev_attr, + .class = &omap2xxx_timer_hwmod_class, +}; + +/* timer9 */ + +struct omap_hwmod omap2xxx_timer9_hwmod = { + .name = "timer9", + .mpu_irqs = omap2_timer9_mpu_irqs, + .main_clk = "gpt9_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT9_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT, + }, + }, + .dev_attr = &capability_pwm_dev_attr, + .class = &omap2xxx_timer_hwmod_class, +}; + +/* timer10 */ + +struct omap_hwmod omap2xxx_timer10_hwmod = { + .name = "timer10", + .mpu_irqs = omap2_timer10_mpu_irqs, + .main_clk = "gpt10_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT10_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT, + }, + }, + .dev_attr = &capability_pwm_dev_attr, + .class = &omap2xxx_timer_hwmod_class, +}; + +/* timer11 */ + +struct omap_hwmod omap2xxx_timer11_hwmod = { + .name = "timer11", + .mpu_irqs = omap2_timer11_mpu_irqs, + .main_clk = "gpt11_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT11_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT, + }, + }, + .dev_attr = &capability_pwm_dev_attr, + .class = &omap2xxx_timer_hwmod_class, +}; + +/* timer12 */ + +struct omap_hwmod omap2xxx_timer12_hwmod = { + .name = "timer12", + .mpu_irqs = omap2xxx_timer12_mpu_irqs, + .main_clk = "gpt12_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPT12_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT, + }, + }, + .dev_attr = &capability_pwm_dev_attr, + .class = &omap2xxx_timer_hwmod_class, +}; + +/* wd_timer2 */ +struct omap_hwmod omap2xxx_wd_timer2_hwmod = { + .name = "wd_timer2", + .class = &omap2xxx_wd_timer_hwmod_class, + .main_clk = "mpu_wdt_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_MPU_WDT_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT, + }, + }, +}; + +/* UART1 */ + +struct omap_hwmod omap2xxx_uart1_hwmod = { + .name = "uart1", + .mpu_irqs = omap2_uart1_mpu_irqs, + .sdma_reqs = omap2_uart1_sdma_reqs, + .main_clk = "uart1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_UART1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT, + }, + }, + .class = &omap2_uart_class, +}; + +/* UART2 */ + +struct omap_hwmod omap2xxx_uart2_hwmod = { + .name = "uart2", + .mpu_irqs = omap2_uart2_mpu_irqs, + .sdma_reqs = omap2_uart2_sdma_reqs, + .main_clk = "uart2_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_UART2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT, + }, + }, + .class = &omap2_uart_class, +}; + +/* UART3 */ + +struct omap_hwmod omap2xxx_uart3_hwmod = { + .name = "uart3", + .mpu_irqs = omap2_uart3_mpu_irqs, + .sdma_reqs = omap2_uart3_sdma_reqs, + .main_clk = "uart3_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 2, + .module_bit = OMAP24XX_EN_UART3_SHIFT, + .idlest_reg_id = 2, + .idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT, + }, + }, + .class = &omap2_uart_class, +}; + +/* dss */ + +static struct omap_hwmod_opt_clk dss_opt_clks[] = { + /* + * The DSS HW needs all DSS clocks enabled during reset. The dss_core + * driver does not use these clocks. + */ + { .role = "tv_clk", .clk = "dss_54m_fck" }, + { .role = "sys_clk", .clk = "dss2_fck" }, +}; + +struct omap_hwmod omap2xxx_dss_core_hwmod = { + .name = "dss_core", + .class = &omap2_dss_hwmod_class, + .main_clk = "dss1_fck", /* instead of dss_fck */ + .sdma_reqs = omap2xxx_dss_sdma_chs, + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT, + }, + }, + .opt_clks = dss_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), + .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET, +}; + +struct omap_hwmod omap2xxx_dss_dispc_hwmod = { + .name = "dss_dispc", + .class = &omap2_dispc_hwmod_class, + .mpu_irqs = omap2_dispc_irqs, + .main_clk = "dss1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + .idlest_reg_id = 1, + .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT, + }, + }, + .flags = HWMOD_NO_IDLEST, + .dev_attr = &omap2_3_dss_dispc_dev_attr +}; + +static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { + { .role = "ick", .clk = "dss_ick" }, +}; + +struct omap_hwmod omap2xxx_dss_rfbi_hwmod = { + .name = "dss_rfbi", + .class = &omap2_rfbi_hwmod_class, + .main_clk = "dss1_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + }, + }, + .opt_clks = dss_rfbi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), + .flags = HWMOD_NO_IDLEST, +}; + +struct omap_hwmod omap2xxx_dss_venc_hwmod = { + .name = "dss_venc", + .class = &omap2_venc_hwmod_class, + .main_clk = "dss_54m_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_DSS1_SHIFT, + .module_offs = CORE_MOD, + }, + }, + .flags = HWMOD_NO_IDLEST, +}; + +/* gpio dev_attr */ +struct omap_gpio_dev_attr omap2xxx_gpio_dev_attr = { + .bank_width = 32, + .dbck_flag = false, +}; + +/* gpio1 */ +struct omap_hwmod omap2xxx_gpio1_hwmod = { + .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .mpu_irqs = omap2_gpio1_irqs, + .main_clk = "gpios_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPIOS_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, + }, + }, + .class = &omap2xxx_gpio_hwmod_class, + .dev_attr = &omap2xxx_gpio_dev_attr, +}; + +/* gpio2 */ +struct omap_hwmod omap2xxx_gpio2_hwmod = { + .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .mpu_irqs = omap2_gpio2_irqs, + .main_clk = "gpios_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPIOS_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, + }, + }, + .class = &omap2xxx_gpio_hwmod_class, + .dev_attr = &omap2xxx_gpio_dev_attr, +}; + +/* gpio3 */ +struct omap_hwmod omap2xxx_gpio3_hwmod = { + .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .mpu_irqs = omap2_gpio3_irqs, + .main_clk = "gpios_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPIOS_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, + }, + }, + .class = &omap2xxx_gpio_hwmod_class, + .dev_attr = &omap2xxx_gpio_dev_attr, +}; + +/* gpio4 */ +struct omap_hwmod omap2xxx_gpio4_hwmod = { + .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .mpu_irqs = omap2_gpio4_irqs, + .main_clk = "gpios_fck", + .prcm = { + .omap2 = { + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_GPIOS_SHIFT, + .module_offs = WKUP_MOD, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT, + }, + }, + .class = &omap2xxx_gpio_hwmod_class, + .dev_attr = &omap2xxx_gpio_dev_attr, +}; + +/* mcspi1 */ +static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = { + .num_chipselect = 4, +}; + +struct omap_hwmod omap2xxx_mcspi1_hwmod = { + .name = "mcspi1", + .mpu_irqs = omap2_mcspi1_mpu_irqs, + .sdma_reqs = omap2_mcspi1_sdma_reqs, + .main_clk = "mcspi1_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_MCSPI1_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MCSPI1_SHIFT, + }, + }, + .class = &omap2xxx_mcspi_class, + .dev_attr = &omap_mcspi1_dev_attr, +}; + +/* mcspi2 */ +static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = { + .num_chipselect = 2, +}; + +struct omap_hwmod omap2xxx_mcspi2_hwmod = { + .name = "mcspi2", + .mpu_irqs = omap2_mcspi2_mpu_irqs, + .sdma_reqs = omap2_mcspi2_sdma_reqs, + .main_clk = "mcspi2_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP24XX_EN_MCSPI2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP24XX_ST_MCSPI2_SHIFT, + }, + }, + .class = &omap2xxx_mcspi_class, + .dev_attr = &omap_mcspi2_dev_attr, +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index db86ce90c69f..0c65079c2b69 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -2,6 +2,7 @@ * omap_hwmod_3xxx_data.c - hardware modules present on the OMAP3xxx chips * * Copyright (C) 2009-2011 Nokia Corporation + * Copyright (C) 2012 Texas Instruments, Inc. * Paul Walmsley * * This program is free software; you can redistribute it and/or modify @@ -38,491 +39,56 @@ /* * OMAP3xxx hardware module integration data * - * ALl of the data in this section should be autogeneratable from the + * All of the data in this section should be autogeneratable from the * TI hardware database or other technical documentation. Data that * is driver-specific or driver-kernel integration-specific belongs * elsewhere. */ -static struct omap_hwmod omap3xxx_mpu_hwmod; -static struct omap_hwmod omap3xxx_iva_hwmod; -static struct omap_hwmod omap3xxx_l3_main_hwmod; -static struct omap_hwmod omap3xxx_l4_core_hwmod; -static struct omap_hwmod omap3xxx_l4_per_hwmod; -static struct omap_hwmod omap3xxx_wd_timer2_hwmod; -static struct omap_hwmod omap3430es1_dss_core_hwmod; -static struct omap_hwmod omap3xxx_dss_core_hwmod; -static struct omap_hwmod omap3xxx_dss_dispc_hwmod; -static struct omap_hwmod omap3xxx_dss_dsi1_hwmod; -static struct omap_hwmod omap3xxx_dss_rfbi_hwmod; -static struct omap_hwmod omap3xxx_dss_venc_hwmod; -static struct omap_hwmod omap3xxx_i2c1_hwmod; -static struct omap_hwmod omap3xxx_i2c2_hwmod; -static struct omap_hwmod omap3xxx_i2c3_hwmod; -static struct omap_hwmod omap3xxx_gpio1_hwmod; -static struct omap_hwmod omap3xxx_gpio2_hwmod; -static struct omap_hwmod omap3xxx_gpio3_hwmod; -static struct omap_hwmod omap3xxx_gpio4_hwmod; -static struct omap_hwmod omap3xxx_gpio5_hwmod; -static struct omap_hwmod omap3xxx_gpio6_hwmod; -static struct omap_hwmod omap34xx_sr1_hwmod; -static struct omap_hwmod omap34xx_sr2_hwmod; -static struct omap_hwmod omap34xx_mcspi1; -static struct omap_hwmod omap34xx_mcspi2; -static struct omap_hwmod omap34xx_mcspi3; -static struct omap_hwmod omap34xx_mcspi4; -static struct omap_hwmod omap3xxx_mmc1_hwmod; -static struct omap_hwmod omap3xxx_mmc2_hwmod; -static struct omap_hwmod omap3xxx_mmc3_hwmod; -static struct omap_hwmod am35xx_usbhsotg_hwmod; - -static struct omap_hwmod omap3xxx_dma_system_hwmod; - -static struct omap_hwmod omap3xxx_mcbsp1_hwmod; -static struct omap_hwmod omap3xxx_mcbsp2_hwmod; -static struct omap_hwmod omap3xxx_mcbsp3_hwmod; -static struct omap_hwmod omap3xxx_mcbsp4_hwmod; -static struct omap_hwmod omap3xxx_mcbsp5_hwmod; -static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod; -static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod; -static struct omap_hwmod omap3xxx_usb_host_hs_hwmod; -static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod; - -/* L3 -> L4_CORE interface */ -static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = { - .master = &omap3xxx_l3_main_hwmod, - .slave = &omap3xxx_l4_core_hwmod, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L3 -> L4_PER interface */ -static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_per = { - .master = &omap3xxx_l3_main_hwmod, - .slave = &omap3xxx_l4_per_hwmod, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; +/* + * IP blocks + */ -/* L3 taret configuration and error log registers */ +/* L3 */ static struct omap_hwmod_irq_info omap3xxx_l3_main_irqs[] = { { .irq = INT_34XX_L3_DBG_IRQ }, { .irq = INT_34XX_L3_APP_IRQ }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap3xxx_l3_main_addrs[] = { - { - .pa_start = 0x68000000, - .pa_end = 0x6800ffff, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -/* MPU -> L3 interface */ -static struct omap_hwmod_ocp_if omap3xxx_mpu__l3_main = { - .master = &omap3xxx_mpu_hwmod, - .slave = &omap3xxx_l3_main_hwmod, - .addr = omap3xxx_l3_main_addrs, - .user = OCP_USER_MPU, -}; - -/* Slave interfaces on the L3 interconnect */ -static struct omap_hwmod_ocp_if *omap3xxx_l3_main_slaves[] = { - &omap3xxx_mpu__l3_main, -}; - -/* DSS -> l3 */ -static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = { - .master = &omap3xxx_dss_core_hwmod, - .slave = &omap3xxx_l3_main_hwmod, - .fw = { - .omap2 = { - .l3_perm_bit = OMAP3_L3_CORE_FW_INIT_ID_DSS, - .flags = OMAP_FIREWALL_L3, - } - }, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* Master interfaces on the L3 interconnect */ -static struct omap_hwmod_ocp_if *omap3xxx_l3_main_masters[] = { - &omap3xxx_l3_main__l4_core, - &omap3xxx_l3_main__l4_per, -}; - -/* L3 */ static struct omap_hwmod omap3xxx_l3_main_hwmod = { .name = "l3_main", .class = &l3_hwmod_class, .mpu_irqs = omap3xxx_l3_main_irqs, - .masters = omap3xxx_l3_main_masters, - .masters_cnt = ARRAY_SIZE(omap3xxx_l3_main_masters), - .slaves = omap3xxx_l3_main_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_l3_main_slaves), .flags = HWMOD_NO_IDLEST, }; -static struct omap_hwmod omap3xxx_l4_wkup_hwmod; -static struct omap_hwmod omap3xxx_uart1_hwmod; -static struct omap_hwmod omap3xxx_uart2_hwmod; -static struct omap_hwmod omap3xxx_uart3_hwmod; -static struct omap_hwmod omap3xxx_uart4_hwmod; -static struct omap_hwmod am35xx_uart4_hwmod; -static struct omap_hwmod omap3xxx_usbhsotg_hwmod; - -/* l3_core -> usbhsotg interface */ -static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = { - .master = &omap3xxx_usbhsotg_hwmod, - .slave = &omap3xxx_l3_main_hwmod, - .clk = "core_l3_ick", - .user = OCP_USER_MPU, -}; - -/* l3_core -> am35xx_usbhsotg interface */ -static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = { - .master = &am35xx_usbhsotg_hwmod, - .slave = &omap3xxx_l3_main_hwmod, - .clk = "core_l3_ick", - .user = OCP_USER_MPU, -}; -/* L4_CORE -> L4_WKUP interface */ -static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_l4_wkup_hwmod, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4 CORE -> MMC1 interface */ -static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc1 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_mmc1_hwmod, - .clk = "mmchs1_ick", - .addr = omap2430_mmc1_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, - .flags = OMAP_FIREWALL_L4 -}; - -/* L4 CORE -> MMC2 interface */ -static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc2 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_mmc2_hwmod, - .clk = "mmchs2_ick", - .addr = omap2430_mmc2_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, - .flags = OMAP_FIREWALL_L4 -}; - -/* L4 CORE -> MMC3 interface */ -static struct omap_hwmod_addr_space omap3xxx_mmc3_addr_space[] = { - { - .pa_start = 0x480ad000, - .pa_end = 0x480ad1ff, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc3 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_mmc3_hwmod, - .clk = "mmchs3_ick", - .addr = omap3xxx_mmc3_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, - .flags = OMAP_FIREWALL_L4 -}; - -/* L4 CORE -> UART1 interface */ -static struct omap_hwmod_addr_space omap3xxx_uart1_addr_space[] = { - { - .pa_start = OMAP3_UART1_BASE, - .pa_end = OMAP3_UART1_BASE + SZ_8K - 1, - .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, - }, - { } -}; - -static struct omap_hwmod_ocp_if omap3_l4_core__uart1 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_uart1_hwmod, - .clk = "uart1_ick", - .addr = omap3xxx_uart1_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4 CORE -> UART2 interface */ -static struct omap_hwmod_addr_space omap3xxx_uart2_addr_space[] = { - { - .pa_start = OMAP3_UART2_BASE, - .pa_end = OMAP3_UART2_BASE + SZ_1K - 1, - .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, - }, - { } -}; - -static struct omap_hwmod_ocp_if omap3_l4_core__uart2 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_uart2_hwmod, - .clk = "uart2_ick", - .addr = omap3xxx_uart2_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4 PER -> UART3 interface */ -static struct omap_hwmod_addr_space omap3xxx_uart3_addr_space[] = { - { - .pa_start = OMAP3_UART3_BASE, - .pa_end = OMAP3_UART3_BASE + SZ_1K - 1, - .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, - }, - { } -}; - -static struct omap_hwmod_ocp_if omap3_l4_per__uart3 = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_uart3_hwmod, - .clk = "uart3_ick", - .addr = omap3xxx_uart3_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4 PER -> UART4 interface */ -static struct omap_hwmod_addr_space omap3xxx_uart4_addr_space[] = { - { - .pa_start = OMAP3_UART4_BASE, - .pa_end = OMAP3_UART4_BASE + SZ_1K - 1, - .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, - }, - { } -}; - -static struct omap_hwmod_ocp_if omap3_l4_per__uart4 = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_uart4_hwmod, - .clk = "uart4_ick", - .addr = omap3xxx_uart4_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* AM35xx: L4 CORE -> UART4 interface */ -static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = { - { - .pa_start = OMAP3_UART4_AM35XX_BASE, - .pa_end = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1, - .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, - }, -}; - -static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &am35xx_uart4_hwmod, - .clk = "uart4_ick", - .addr = am35xx_uart4_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4 CORE -> I2C1 interface */ -static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_i2c1_hwmod, - .clk = "i2c1_ick", - .addr = omap2_i2c1_addr_space, - .fw = { - .omap2 = { - .l4_fw_region = OMAP3_L4_CORE_FW_I2C1_REGION, - .l4_prot_group = 7, - .flags = OMAP_FIREWALL_L4, - } - }, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4 CORE -> I2C2 interface */ -static struct omap_hwmod_ocp_if omap3_l4_core__i2c2 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_i2c2_hwmod, - .clk = "i2c2_ick", - .addr = omap2_i2c2_addr_space, - .fw = { - .omap2 = { - .l4_fw_region = OMAP3_L4_CORE_FW_I2C2_REGION, - .l4_prot_group = 7, - .flags = OMAP_FIREWALL_L4, - } - }, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* L4 CORE -> I2C3 interface */ -static struct omap_hwmod_addr_space omap3xxx_i2c3_addr_space[] = { - { - .pa_start = 0x48060000, - .pa_end = 0x48060000 + SZ_128 - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_i2c3_hwmod, - .clk = "i2c3_ick", - .addr = omap3xxx_i2c3_addr_space, - .fw = { - .omap2 = { - .l4_fw_region = OMAP3_L4_CORE_FW_I2C3_REGION, - .l4_prot_group = 7, - .flags = OMAP_FIREWALL_L4, - } - }, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = { - { .irq = 18}, - { .irq = -1 } -}; - -static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = { - { .irq = 19}, - { .irq = -1 } -}; - -/* L4 CORE -> SR1 interface */ -static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = { - { - .pa_start = OMAP34XX_SR1_BASE, - .pa_end = OMAP34XX_SR1_BASE + SZ_1K - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -static struct omap_hwmod_ocp_if omap3_l4_core__sr1 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap34xx_sr1_hwmod, - .clk = "sr_l4_ick", - .addr = omap3_sr1_addr_space, - .user = OCP_USER_MPU, -}; - -/* L4 CORE -> SR1 interface */ -static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = { - { - .pa_start = OMAP34XX_SR2_BASE, - .pa_end = OMAP34XX_SR2_BASE + SZ_1K - 1, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -static struct omap_hwmod_ocp_if omap3_l4_core__sr2 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap34xx_sr2_hwmod, - .clk = "sr_l4_ick", - .addr = omap3_sr2_addr_space, - .user = OCP_USER_MPU, -}; - -/* -* usbhsotg interface data -*/ - -static struct omap_hwmod_addr_space omap3xxx_usbhsotg_addrs[] = { - { - .pa_start = OMAP34XX_HSUSB_OTG_BASE, - .pa_end = OMAP34XX_HSUSB_OTG_BASE + SZ_4K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_core -> usbhsotg */ -static struct omap_hwmod_ocp_if omap3xxx_l4_core__usbhsotg = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_usbhsotg_hwmod, - .clk = "l4_ick", - .addr = omap3xxx_usbhsotg_addrs, - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if *omap3xxx_usbhsotg_masters[] = { - &omap3xxx_usbhsotg__l3, -}; - -static struct omap_hwmod_ocp_if *omap3xxx_usbhsotg_slaves[] = { - &omap3xxx_l4_core__usbhsotg, -}; - -static struct omap_hwmod_addr_space am35xx_usbhsotg_addrs[] = { - { - .pa_start = AM35XX_IPSS_USBOTGSS_BASE, - .pa_end = AM35XX_IPSS_USBOTGSS_BASE + SZ_4K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_core -> usbhsotg */ -static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &am35xx_usbhsotg_hwmod, - .clk = "l4_ick", - .addr = am35xx_usbhsotg_addrs, - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if *am35xx_usbhsotg_masters[] = { - &am35xx_usbhsotg__l3, -}; - -static struct omap_hwmod_ocp_if *am35xx_usbhsotg_slaves[] = { - &am35xx_l4_core__usbhsotg, -}; -/* Slave interfaces on the L4_CORE interconnect */ -static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = { - &omap3xxx_l3_main__l4_core, -}; - /* L4 CORE */ static struct omap_hwmod omap3xxx_l4_core_hwmod = { .name = "l4_core", .class = &l4_hwmod_class, - .slaves = omap3xxx_l4_core_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_l4_core_slaves), .flags = HWMOD_NO_IDLEST, }; -/* Slave interfaces on the L4_PER interconnect */ -static struct omap_hwmod_ocp_if *omap3xxx_l4_per_slaves[] = { - &omap3xxx_l3_main__l4_per, -}; - /* L4 PER */ static struct omap_hwmod omap3xxx_l4_per_hwmod = { .name = "l4_per", .class = &l4_hwmod_class, - .slaves = omap3xxx_l4_per_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_l4_per_slaves), .flags = HWMOD_NO_IDLEST, }; -/* Slave interfaces on the L4_WKUP interconnect */ -static struct omap_hwmod_ocp_if *omap3xxx_l4_wkup_slaves[] = { - &omap3xxx_l4_core__l4_wkup, -}; - /* L4 WKUP */ static struct omap_hwmod omap3xxx_l4_wkup_hwmod = { .name = "l4_wkup", .class = &l4_hwmod_class, - .slaves = omap3xxx_l4_wkup_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_l4_wkup_slaves), .flags = HWMOD_NO_IDLEST, }; -/* Master interfaces on the MPU device */ -static struct omap_hwmod_ocp_if *omap3xxx_mpu_masters[] = { - &omap3xxx_mpu__l3_main, +/* L4 SEC */ +static struct omap_hwmod omap3xxx_l4_sec_hwmod = { + .name = "l4_sec", + .class = &l4_hwmod_class, + .flags = HWMOD_NO_IDLEST, }; /* MPU */ @@ -530,35 +96,22 @@ static struct omap_hwmod omap3xxx_mpu_hwmod = { .name = "mpu", .class = &mpu_hwmod_class, .main_clk = "arm_fck", - .masters = omap3xxx_mpu_masters, - .masters_cnt = ARRAY_SIZE(omap3xxx_mpu_masters), }; -/* - * IVA2_2 interface data - */ - -/* IVA2 <- L3 interface */ -static struct omap_hwmod_ocp_if omap3xxx_l3__iva = { - .master = &omap3xxx_l3_main_hwmod, - .slave = &omap3xxx_iva_hwmod, - .clk = "iva2_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, +/* IVA2 (IVA2) */ +static struct omap_hwmod_rst_info omap3xxx_iva_resets[] = { + { .name = "logic", .rst_shift = 0 }, + { .name = "seq0", .rst_shift = 1 }, + { .name = "seq1", .rst_shift = 2 }, }; -static struct omap_hwmod_ocp_if *omap3xxx_iva_masters[] = { - &omap3xxx_l3__iva, -}; - -/* - * IVA2 (IVA2) - */ - static struct omap_hwmod omap3xxx_iva_hwmod = { .name = "iva", .class = &iva_hwmod_class, - .masters = omap3xxx_iva_masters, - .masters_cnt = ARRAY_SIZE(omap3xxx_iva_masters), + .clkdm_name = "iva2_clkdm", + .rst_lines = omap3xxx_iva_resets, + .rst_lines_cnt = ARRAY_SIZE(omap3xxx_iva_resets), + .main_clk = "iva2_ck", }; /* timer class */ @@ -597,46 +150,20 @@ static struct omap_hwmod_class omap3xxx_timer_hwmod_class = { /* secure timers dev attribute */ static struct omap_timer_capability_dev_attr capability_secure_dev_attr = { - .timer_capability = OMAP_TIMER_SECURE, + .timer_capability = OMAP_TIMER_SECURE, }; /* always-on timers dev attribute */ static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = { - .timer_capability = OMAP_TIMER_ALWON, + .timer_capability = OMAP_TIMER_ALWON, }; /* pwm timers dev attribute */ static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = { - .timer_capability = OMAP_TIMER_HAS_PWM, + .timer_capability = OMAP_TIMER_HAS_PWM, }; /* timer1 */ -static struct omap_hwmod omap3xxx_timer1_hwmod; - -static struct omap_hwmod_addr_space omap3xxx_timer1_addrs[] = { - { - .pa_start = 0x48318000, - .pa_end = 0x48318000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_wkup -> timer1 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__timer1 = { - .master = &omap3xxx_l4_wkup_hwmod, - .slave = &omap3xxx_timer1_hwmod, - .clk = "gpt1_ick", - .addr = omap3xxx_timer1_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer1 slave port */ -static struct omap_hwmod_ocp_if *omap3xxx_timer1_slaves[] = { - &omap3xxx_l4_wkup__timer1, -}; - -/* timer1 hwmod */ static struct omap_hwmod omap3xxx_timer1_hwmod = { .name = "timer1", .mpu_irqs = omap2_timer1_mpu_irqs, @@ -651,38 +178,10 @@ static struct omap_hwmod omap3xxx_timer1_hwmod = { }, }, .dev_attr = &capability_alwon_dev_attr, - .slaves = omap3xxx_timer1_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_timer1_slaves), .class = &omap3xxx_timer_1ms_hwmod_class, }; /* timer2 */ -static struct omap_hwmod omap3xxx_timer2_hwmod; - -static struct omap_hwmod_addr_space omap3xxx_timer2_addrs[] = { - { - .pa_start = 0x49032000, - .pa_end = 0x49032000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> timer2 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer2 = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_timer2_hwmod, - .clk = "gpt2_ick", - .addr = omap3xxx_timer2_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer2 slave port */ -static struct omap_hwmod_ocp_if *omap3xxx_timer2_slaves[] = { - &omap3xxx_l4_per__timer2, -}; - -/* timer2 hwmod */ static struct omap_hwmod omap3xxx_timer2_hwmod = { .name = "timer2", .mpu_irqs = omap2_timer2_mpu_irqs, @@ -697,38 +196,10 @@ static struct omap_hwmod omap3xxx_timer2_hwmod = { }, }, .dev_attr = &capability_alwon_dev_attr, - .slaves = omap3xxx_timer2_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_timer2_slaves), .class = &omap3xxx_timer_1ms_hwmod_class, }; /* timer3 */ -static struct omap_hwmod omap3xxx_timer3_hwmod; - -static struct omap_hwmod_addr_space omap3xxx_timer3_addrs[] = { - { - .pa_start = 0x49034000, - .pa_end = 0x49034000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> timer3 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer3 = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_timer3_hwmod, - .clk = "gpt3_ick", - .addr = omap3xxx_timer3_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer3 slave port */ -static struct omap_hwmod_ocp_if *omap3xxx_timer3_slaves[] = { - &omap3xxx_l4_per__timer3, -}; - -/* timer3 hwmod */ static struct omap_hwmod omap3xxx_timer3_hwmod = { .name = "timer3", .mpu_irqs = omap2_timer3_mpu_irqs, @@ -743,38 +214,10 @@ static struct omap_hwmod omap3xxx_timer3_hwmod = { }, }, .dev_attr = &capability_alwon_dev_attr, - .slaves = omap3xxx_timer3_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_timer3_slaves), .class = &omap3xxx_timer_hwmod_class, }; /* timer4 */ -static struct omap_hwmod omap3xxx_timer4_hwmod; - -static struct omap_hwmod_addr_space omap3xxx_timer4_addrs[] = { - { - .pa_start = 0x49036000, - .pa_end = 0x49036000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> timer4 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer4 = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_timer4_hwmod, - .clk = "gpt4_ick", - .addr = omap3xxx_timer4_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer4 slave port */ -static struct omap_hwmod_ocp_if *omap3xxx_timer4_slaves[] = { - &omap3xxx_l4_per__timer4, -}; - -/* timer4 hwmod */ static struct omap_hwmod omap3xxx_timer4_hwmod = { .name = "timer4", .mpu_irqs = omap2_timer4_mpu_irqs, @@ -789,38 +232,10 @@ static struct omap_hwmod omap3xxx_timer4_hwmod = { }, }, .dev_attr = &capability_alwon_dev_attr, - .slaves = omap3xxx_timer4_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_timer4_slaves), .class = &omap3xxx_timer_hwmod_class, }; /* timer5 */ -static struct omap_hwmod omap3xxx_timer5_hwmod; - -static struct omap_hwmod_addr_space omap3xxx_timer5_addrs[] = { - { - .pa_start = 0x49038000, - .pa_end = 0x49038000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> timer5 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer5 = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_timer5_hwmod, - .clk = "gpt5_ick", - .addr = omap3xxx_timer5_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer5 slave port */ -static struct omap_hwmod_ocp_if *omap3xxx_timer5_slaves[] = { - &omap3xxx_l4_per__timer5, -}; - -/* timer5 hwmod */ static struct omap_hwmod omap3xxx_timer5_hwmod = { .name = "timer5", .mpu_irqs = omap2_timer5_mpu_irqs, @@ -835,38 +250,10 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = { }, }, .dev_attr = &capability_alwon_dev_attr, - .slaves = omap3xxx_timer5_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_timer5_slaves), .class = &omap3xxx_timer_hwmod_class, }; /* timer6 */ -static struct omap_hwmod omap3xxx_timer6_hwmod; - -static struct omap_hwmod_addr_space omap3xxx_timer6_addrs[] = { - { - .pa_start = 0x4903A000, - .pa_end = 0x4903A000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> timer6 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer6 = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_timer6_hwmod, - .clk = "gpt6_ick", - .addr = omap3xxx_timer6_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer6 slave port */ -static struct omap_hwmod_ocp_if *omap3xxx_timer6_slaves[] = { - &omap3xxx_l4_per__timer6, -}; - -/* timer6 hwmod */ static struct omap_hwmod omap3xxx_timer6_hwmod = { .name = "timer6", .mpu_irqs = omap2_timer6_mpu_irqs, @@ -881,38 +268,10 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = { }, }, .dev_attr = &capability_alwon_dev_attr, - .slaves = omap3xxx_timer6_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_timer6_slaves), .class = &omap3xxx_timer_hwmod_class, }; /* timer7 */ -static struct omap_hwmod omap3xxx_timer7_hwmod; - -static struct omap_hwmod_addr_space omap3xxx_timer7_addrs[] = { - { - .pa_start = 0x4903C000, - .pa_end = 0x4903C000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> timer7 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer7 = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_timer7_hwmod, - .clk = "gpt7_ick", - .addr = omap3xxx_timer7_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer7 slave port */ -static struct omap_hwmod_ocp_if *omap3xxx_timer7_slaves[] = { - &omap3xxx_l4_per__timer7, -}; - -/* timer7 hwmod */ static struct omap_hwmod omap3xxx_timer7_hwmod = { .name = "timer7", .mpu_irqs = omap2_timer7_mpu_irqs, @@ -927,38 +286,10 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = { }, }, .dev_attr = &capability_alwon_dev_attr, - .slaves = omap3xxx_timer7_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_timer7_slaves), .class = &omap3xxx_timer_hwmod_class, }; /* timer8 */ -static struct omap_hwmod omap3xxx_timer8_hwmod; - -static struct omap_hwmod_addr_space omap3xxx_timer8_addrs[] = { - { - .pa_start = 0x4903E000, - .pa_end = 0x4903E000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> timer8 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer8 = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_timer8_hwmod, - .clk = "gpt8_ick", - .addr = omap3xxx_timer8_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer8 slave port */ -static struct omap_hwmod_ocp_if *omap3xxx_timer8_slaves[] = { - &omap3xxx_l4_per__timer8, -}; - -/* timer8 hwmod */ static struct omap_hwmod omap3xxx_timer8_hwmod = { .name = "timer8", .mpu_irqs = omap2_timer8_mpu_irqs, @@ -973,38 +304,10 @@ static struct omap_hwmod omap3xxx_timer8_hwmod = { }, }, .dev_attr = &capability_pwm_dev_attr, - .slaves = omap3xxx_timer8_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_timer8_slaves), .class = &omap3xxx_timer_hwmod_class, }; /* timer9 */ -static struct omap_hwmod omap3xxx_timer9_hwmod; - -static struct omap_hwmod_addr_space omap3xxx_timer9_addrs[] = { - { - .pa_start = 0x49040000, - .pa_end = 0x49040000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> timer9 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer9 = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_timer9_hwmod, - .clk = "gpt9_ick", - .addr = omap3xxx_timer9_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer9 slave port */ -static struct omap_hwmod_ocp_if *omap3xxx_timer9_slaves[] = { - &omap3xxx_l4_per__timer9, -}; - -/* timer9 hwmod */ static struct omap_hwmod omap3xxx_timer9_hwmod = { .name = "timer9", .mpu_irqs = omap2_timer9_mpu_irqs, @@ -1019,29 +322,10 @@ static struct omap_hwmod omap3xxx_timer9_hwmod = { }, }, .dev_attr = &capability_pwm_dev_attr, - .slaves = omap3xxx_timer9_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_timer9_slaves), .class = &omap3xxx_timer_hwmod_class, }; /* timer10 */ -static struct omap_hwmod omap3xxx_timer10_hwmod; - -/* l4_core -> timer10 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer10 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_timer10_hwmod, - .clk = "gpt10_ick", - .addr = omap2_timer10_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer10 slave port */ -static struct omap_hwmod_ocp_if *omap3xxx_timer10_slaves[] = { - &omap3xxx_l4_core__timer10, -}; - -/* timer10 hwmod */ static struct omap_hwmod omap3xxx_timer10_hwmod = { .name = "timer10", .mpu_irqs = omap2_timer10_mpu_irqs, @@ -1056,29 +340,10 @@ static struct omap_hwmod omap3xxx_timer10_hwmod = { }, }, .dev_attr = &capability_pwm_dev_attr, - .slaves = omap3xxx_timer10_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_timer10_slaves), .class = &omap3xxx_timer_1ms_hwmod_class, }; /* timer11 */ -static struct omap_hwmod omap3xxx_timer11_hwmod; - -/* l4_core -> timer11 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer11 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_timer11_hwmod, - .clk = "gpt11_ick", - .addr = omap2_timer11_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer11 slave port */ -static struct omap_hwmod_ocp_if *omap3xxx_timer11_slaves[] = { - &omap3xxx_l4_core__timer11, -}; - -/* timer11 hwmod */ static struct omap_hwmod omap3xxx_timer11_hwmod = { .name = "timer11", .mpu_irqs = omap2_timer11_mpu_irqs, @@ -1093,42 +358,15 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = { }, }, .dev_attr = &capability_pwm_dev_attr, - .slaves = omap3xxx_timer11_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_timer11_slaves), .class = &omap3xxx_timer_hwmod_class, }; -/* timer12*/ -static struct omap_hwmod omap3xxx_timer12_hwmod; +/* timer12 */ static struct omap_hwmod_irq_info omap3xxx_timer12_mpu_irqs[] = { { .irq = 95, }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap3xxx_timer12_addrs[] = { - { - .pa_start = 0x48304000, - .pa_end = 0x48304000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_core -> timer12 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer12 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_timer12_hwmod, - .clk = "gpt12_ick", - .addr = omap3xxx_timer12_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer12 slave port */ -static struct omap_hwmod_ocp_if *omap3xxx_timer12_slaves[] = { - &omap3xxx_l4_core__timer12, -}; - -/* timer12 hwmod */ static struct omap_hwmod omap3xxx_timer12_hwmod = { .name = "timer12", .mpu_irqs = omap3xxx_timer12_mpu_irqs, @@ -1143,29 +381,9 @@ static struct omap_hwmod omap3xxx_timer12_hwmod = { }, }, .dev_attr = &capability_secure_dev_attr, - .slaves = omap3xxx_timer12_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_timer12_slaves), .class = &omap3xxx_timer_hwmod_class, }; -/* l4_wkup -> wd_timer2 */ -static struct omap_hwmod_addr_space omap3xxx_wd_timer2_addrs[] = { - { - .pa_start = 0x48314000, - .pa_end = 0x4831407f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__wd_timer2 = { - .master = &omap3xxx_l4_wkup_hwmod, - .slave = &omap3xxx_wd_timer2_hwmod, - .clk = "wdt2_ick", - .addr = omap3xxx_wd_timer2_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* * 'wd_timer' class * 32-bit watchdog upward counter that generates a pulse on the reset pin on @@ -1203,11 +421,6 @@ static struct omap_hwmod_class omap3xxx_wd_timer_hwmod_class = { .pre_shutdown = &omap2_wd_timer_disable }; -/* wd_timer2 */ -static struct omap_hwmod_ocp_if *omap3xxx_wd_timer2_slaves[] = { - &omap3xxx_l4_wkup__wd_timer2, -}; - static struct omap_hwmod omap3xxx_wd_timer2_hwmod = { .name = "wd_timer2", .class = &omap3xxx_wd_timer_hwmod_class, @@ -1221,8 +434,6 @@ static struct omap_hwmod omap3xxx_wd_timer2_hwmod = { .idlest_idle_bit = OMAP3430_ST_WDT2_SHIFT, }, }, - .slaves = omap3xxx_wd_timer2_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_wd_timer2_slaves), /* * XXX: Use software supervised mode, HW supervised smartidle seems to * block CORE power domain idle transitions. Maybe a HW bug in wdt2? @@ -1231,11 +442,6 @@ static struct omap_hwmod omap3xxx_wd_timer2_hwmod = { }; /* UART1 */ - -static struct omap_hwmod_ocp_if *omap3xxx_uart1_slaves[] = { - &omap3_l4_core__uart1, -}; - static struct omap_hwmod omap3xxx_uart1_hwmod = { .name = "uart1", .mpu_irqs = omap2_uart1_mpu_irqs, @@ -1250,17 +456,10 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { .idlest_idle_bit = OMAP3430_EN_UART1_SHIFT, }, }, - .slaves = omap3xxx_uart1_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_uart1_slaves), .class = &omap2_uart_class, }; /* UART2 */ - -static struct omap_hwmod_ocp_if *omap3xxx_uart2_slaves[] = { - &omap3_l4_core__uart2, -}; - static struct omap_hwmod omap3xxx_uart2_hwmod = { .name = "uart2", .mpu_irqs = omap2_uart2_mpu_irqs, @@ -1275,17 +474,10 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { .idlest_idle_bit = OMAP3430_EN_UART2_SHIFT, }, }, - .slaves = omap3xxx_uart2_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_uart2_slaves), .class = &omap2_uart_class, }; /* UART3 */ - -static struct omap_hwmod_ocp_if *omap3xxx_uart3_slaves[] = { - &omap3_l4_per__uart3, -}; - static struct omap_hwmod omap3xxx_uart3_hwmod = { .name = "uart3", .mpu_irqs = omap2_uart3_mpu_irqs, @@ -1300,13 +492,10 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { .idlest_idle_bit = OMAP3430_EN_UART3_SHIFT, }, }, - .slaves = omap3xxx_uart3_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_uart3_slaves), .class = &omap2_uart_class, }; /* UART4 */ - static struct omap_hwmod_irq_info uart4_mpu_irqs[] = { { .irq = INT_36XX_UART4_IRQ, }, { .irq = -1 } @@ -1318,11 +507,7 @@ static struct omap_hwmod_dma_info uart4_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_ocp_if *omap3xxx_uart4_slaves[] = { - &omap3_l4_per__uart4, -}; - -static struct omap_hwmod omap3xxx_uart4_hwmod = { +static struct omap_hwmod omap36xx_uart4_hwmod = { .name = "uart4", .mpu_irqs = uart4_mpu_irqs, .sdma_reqs = uart4_sdma_reqs, @@ -1336,8 +521,6 @@ static struct omap_hwmod omap3xxx_uart4_hwmod = { .idlest_idle_bit = OMAP3630_EN_UART4_SHIFT, }, }, - .slaves = omap3xxx_uart4_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_uart4_slaves), .class = &omap2_uart_class, }; @@ -1350,16 +533,12 @@ static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = { { .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, }, }; -static struct omap_hwmod_ocp_if *am35xx_uart4_slaves[] = { - &am35xx_l4_core__uart4, -}; - static struct omap_hwmod am35xx_uart4_hwmod = { - .name = "uart4", - .mpu_irqs = am35xx_uart4_mpu_irqs, - .sdma_reqs = am35xx_uart4_sdma_reqs, - .main_clk = "uart4_fck", - .prcm = { + .name = "uart4", + .mpu_irqs = am35xx_uart4_mpu_irqs, + .sdma_reqs = am35xx_uart4_sdma_reqs, + .main_clk = "uart4_fck", + .prcm = { .omap2 = { .module_offs = CORE_MOD, .prcm_reg_id = 1, @@ -1368,12 +547,9 @@ static struct omap_hwmod am35xx_uart4_hwmod = { .idlest_idle_bit = OMAP3430_EN_UART4_SHIFT, }, }, - .slaves = am35xx_uart4_slaves, - .slaves_cnt = ARRAY_SIZE(am35xx_uart4_slaves), - .class = &omap2_uart_class, + .class = &omap2_uart_class, }; - static struct omap_hwmod_class i2c_class = { .name = "i2c", .sysc = &i2c_sysc, @@ -1388,51 +564,6 @@ static struct omap_hwmod_dma_info omap3xxx_dss_sdma_chs[] = { }; /* dss */ -/* dss master ports */ -static struct omap_hwmod_ocp_if *omap3xxx_dss_masters[] = { - &omap3xxx_dss__l3, -}; - -/* l4_core -> dss */ -static struct omap_hwmod_ocp_if omap3430es1_l4_core__dss = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3430es1_dss_core_hwmod, - .clk = "dss_ick", - .addr = omap2_dss_addrs, - .fw = { - .omap2 = { - .l4_fw_region = OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION, - .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, - .flags = OMAP_FIREWALL_L4, - } - }, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_dss_core_hwmod, - .clk = "dss_ick", - .addr = omap2_dss_addrs, - .fw = { - .omap2 = { - .l4_fw_region = OMAP3_L4_CORE_FW_DSS_CORE_REGION, - .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, - .flags = OMAP_FIREWALL_L4, - } - }, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dss slave ports */ -static struct omap_hwmod_ocp_if *omap3430es1_dss_slaves[] = { - &omap3430es1_l4_core__dss, -}; - -static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = { - &omap3xxx_l4_core__dss, -}; - static struct omap_hwmod_opt_clk dss_opt_clks[] = { /* * The DSS HW needs all DSS clocks enabled during reset. The dss_core @@ -1460,10 +591,6 @@ static struct omap_hwmod omap3430es1_dss_core_hwmod = { }, .opt_clks = dss_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), - .slaves = omap3430es1_dss_slaves, - .slaves_cnt = ARRAY_SIZE(omap3430es1_dss_slaves), - .masters = omap3xxx_dss_masters, - .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET, }; @@ -1485,10 +612,6 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = { }, .opt_clks = dss_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), - .slaves = omap3xxx_dss_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_slaves), - .masters = omap3xxx_dss_masters, - .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), }; /* @@ -1513,27 +636,6 @@ static struct omap_hwmod_class omap3_dispc_hwmod_class = { .sysc = &omap3_dispc_sysc, }; -/* l4_core -> dss_dispc */ -static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_dss_dispc_hwmod, - .clk = "dss_ick", - .addr = omap2_dss_dispc_addrs, - .fw = { - .omap2 = { - .l4_fw_region = OMAP3_L4_CORE_FW_DSS_DISPC_REGION, - .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, - .flags = OMAP_FIREWALL_L4, - } - }, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dss_dispc slave ports */ -static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = { - &omap3xxx_l4_core__dss_dispc, -}; - static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { .name = "dss_dispc", .class = &omap3_dispc_hwmod_class, @@ -1546,8 +648,6 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { .module_offs = OMAP3430_DSS_MOD, }, }, - .slaves = omap3xxx_dss_dispc_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_slaves), .flags = HWMOD_NO_IDLEST, .dev_attr = &omap2_3_dss_dispc_dev_attr }; @@ -1567,36 +667,6 @@ static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = { }; /* dss_dsi1 */ -static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = { - { - .pa_start = 0x4804FC00, - .pa_end = 0x4804FFFF, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_core -> dss_dsi1 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_dss_dsi1_hwmod, - .clk = "dss_ick", - .addr = omap3xxx_dss_dsi1_addrs, - .fw = { - .omap2 = { - .l4_fw_region = OMAP3_L4_CORE_FW_DSS_DSI_REGION, - .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, - .flags = OMAP_FIREWALL_L4, - } - }, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dss_dsi1 slave ports */ -static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = { - &omap3xxx_l4_core__dss_dsi1, -}; - static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = { { .role = "sys_clk", .clk = "dss2_alwon_fck" }, }; @@ -1615,32 +685,9 @@ static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = { }, .opt_clks = dss_dsi1_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks), - .slaves = omap3xxx_dss_dsi1_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_slaves), .flags = HWMOD_NO_IDLEST, }; -/* l4_core -> dss_rfbi */ -static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_rfbi = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_dss_rfbi_hwmod, - .clk = "dss_ick", - .addr = omap2_dss_rfbi_addrs, - .fw = { - .omap2 = { - .l4_fw_region = OMAP3_L4_CORE_FW_DSS_RFBI_REGION, - .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP , - .flags = OMAP_FIREWALL_L4, - } - }, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dss_rfbi slave ports */ -static struct omap_hwmod_ocp_if *omap3xxx_dss_rfbi_slaves[] = { - &omap3xxx_l4_core__dss_rfbi, -}; - static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { { .role = "ick", .clk = "dss_ick" }, }; @@ -1658,32 +705,9 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = { }, .opt_clks = dss_rfbi_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), - .slaves = omap3xxx_dss_rfbi_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_slaves), .flags = HWMOD_NO_IDLEST, }; -/* l4_core -> dss_venc */ -static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_dss_venc_hwmod, - .clk = "dss_ick", - .addr = omap2_dss_venc_addrs, - .fw = { - .omap2 = { - .l4_fw_region = OMAP3_L4_CORE_FW_DSS_VENC_REGION, - .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, - .flags = OMAP_FIREWALL_L4, - } - }, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dss_venc slave ports */ -static struct omap_hwmod_ocp_if *omap3xxx_dss_venc_slaves[] = { - &omap3xxx_l4_core__dss_venc, -}; - static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = { /* required only on OMAP3430 */ { .role = "tv_dac_clk", .clk = "dss_96m_fck" }, @@ -1702,13 +726,10 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = { }, .opt_clks = dss_venc_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_venc_opt_clks), - .slaves = omap3xxx_dss_venc_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_venc_slaves), .flags = HWMOD_NO_IDLEST, }; /* I2C1 */ - static struct omap_i2c_dev_attr i2c1_dev_attr = { .fifo_depth = 8, /* bytes */ .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 | @@ -1716,10 +737,6 @@ static struct omap_i2c_dev_attr i2c1_dev_attr = { OMAP_I2C_FLAG_BUS_SHIFT_2, }; -static struct omap_hwmod_ocp_if *omap3xxx_i2c1_slaves[] = { - &omap3_l4_core__i2c1, -}; - static struct omap_hwmod omap3xxx_i2c1_hwmod = { .name = "i2c1", .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, @@ -1735,14 +752,11 @@ static struct omap_hwmod omap3xxx_i2c1_hwmod = { .idlest_idle_bit = OMAP3430_ST_I2C1_SHIFT, }, }, - .slaves = omap3xxx_i2c1_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_i2c1_slaves), .class = &i2c_class, .dev_attr = &i2c1_dev_attr, }; /* I2C2 */ - static struct omap_i2c_dev_attr i2c2_dev_attr = { .fifo_depth = 8, /* bytes */ .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 | @@ -1750,10 +764,6 @@ static struct omap_i2c_dev_attr i2c2_dev_attr = { OMAP_I2C_FLAG_BUS_SHIFT_2, }; -static struct omap_hwmod_ocp_if *omap3xxx_i2c2_slaves[] = { - &omap3_l4_core__i2c2, -}; - static struct omap_hwmod omap3xxx_i2c2_hwmod = { .name = "i2c2", .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, @@ -1769,14 +779,11 @@ static struct omap_hwmod omap3xxx_i2c2_hwmod = { .idlest_idle_bit = OMAP3430_ST_I2C2_SHIFT, }, }, - .slaves = omap3xxx_i2c2_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_i2c2_slaves), .class = &i2c_class, .dev_attr = &i2c2_dev_attr, }; /* I2C3 */ - static struct omap_i2c_dev_attr i2c3_dev_attr = { .fifo_depth = 64, /* bytes */ .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 | @@ -1795,10 +802,6 @@ static struct omap_hwmod_dma_info i2c3_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_ocp_if *omap3xxx_i2c3_slaves[] = { - &omap3_l4_core__i2c3, -}; - static struct omap_hwmod omap3xxx_i2c3_hwmod = { .name = "i2c3", .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT, @@ -1814,114 +817,10 @@ static struct omap_hwmod omap3xxx_i2c3_hwmod = { .idlest_idle_bit = OMAP3430_ST_I2C3_SHIFT, }, }, - .slaves = omap3xxx_i2c3_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_i2c3_slaves), .class = &i2c_class, .dev_attr = &i2c3_dev_attr, }; -/* l4_wkup -> gpio1 */ -static struct omap_hwmod_addr_space omap3xxx_gpio1_addrs[] = { - { - .pa_start = 0x48310000, - .pa_end = 0x483101ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__gpio1 = { - .master = &omap3xxx_l4_wkup_hwmod, - .slave = &omap3xxx_gpio1_hwmod, - .addr = omap3xxx_gpio1_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio2 */ -static struct omap_hwmod_addr_space omap3xxx_gpio2_addrs[] = { - { - .pa_start = 0x49050000, - .pa_end = 0x490501ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio2 = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_gpio2_hwmod, - .addr = omap3xxx_gpio2_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio3 */ -static struct omap_hwmod_addr_space omap3xxx_gpio3_addrs[] = { - { - .pa_start = 0x49052000, - .pa_end = 0x490521ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_gpio3_hwmod, - .addr = omap3xxx_gpio3_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio4 */ -static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = { - { - .pa_start = 0x49054000, - .pa_end = 0x490541ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio4 = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_gpio4_hwmod, - .addr = omap3xxx_gpio4_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio5 */ -static struct omap_hwmod_addr_space omap3xxx_gpio5_addrs[] = { - { - .pa_start = 0x49056000, - .pa_end = 0x490561ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio5 = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_gpio5_hwmod, - .addr = omap3xxx_gpio5_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per -> gpio6 */ -static struct omap_hwmod_addr_space omap3xxx_gpio6_addrs[] = { - { - .pa_start = 0x49058000, - .pa_end = 0x490581ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_gpio6_hwmod, - .addr = omap3xxx_gpio6_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* * 'gpio' class * general purpose io module @@ -1944,7 +843,7 @@ static struct omap_hwmod_class omap3xxx_gpio_hwmod_class = { .rev = 1, }; -/* gpio_dev_attr*/ +/* gpio_dev_attr */ static struct omap_gpio_dev_attr gpio_dev_attr = { .bank_width = 32, .dbck_flag = true, @@ -1955,10 +854,6 @@ static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { { .role = "dbclk", .clk = "gpio1_dbck", }, }; -static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = { - &omap3xxx_l4_wkup__gpio1, -}; - static struct omap_hwmod omap3xxx_gpio1_hwmod = { .name = "gpio1", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, @@ -1975,8 +870,6 @@ static struct omap_hwmod omap3xxx_gpio1_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPIO1_SHIFT, }, }, - .slaves = omap3xxx_gpio1_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio1_slaves), .class = &omap3xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, }; @@ -1986,10 +879,6 @@ static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { { .role = "dbclk", .clk = "gpio2_dbck", }, }; -static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = { - &omap3xxx_l4_per__gpio2, -}; - static struct omap_hwmod omap3xxx_gpio2_hwmod = { .name = "gpio2", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, @@ -2006,8 +895,6 @@ static struct omap_hwmod omap3xxx_gpio2_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPIO2_SHIFT, }, }, - .slaves = omap3xxx_gpio2_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio2_slaves), .class = &omap3xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, }; @@ -2017,10 +904,6 @@ static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { { .role = "dbclk", .clk = "gpio3_dbck", }, }; -static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = { - &omap3xxx_l4_per__gpio3, -}; - static struct omap_hwmod omap3xxx_gpio3_hwmod = { .name = "gpio3", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, @@ -2037,8 +920,6 @@ static struct omap_hwmod omap3xxx_gpio3_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPIO3_SHIFT, }, }, - .slaves = omap3xxx_gpio3_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio3_slaves), .class = &omap3xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, }; @@ -2048,10 +929,6 @@ static struct omap_hwmod_opt_clk gpio4_opt_clks[] = { { .role = "dbclk", .clk = "gpio4_dbck", }, }; -static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = { - &omap3xxx_l4_per__gpio4, -}; - static struct omap_hwmod omap3xxx_gpio4_hwmod = { .name = "gpio4", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, @@ -2068,8 +945,6 @@ static struct omap_hwmod omap3xxx_gpio4_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPIO4_SHIFT, }, }, - .slaves = omap3xxx_gpio4_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio4_slaves), .class = &omap3xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, }; @@ -2084,10 +959,6 @@ static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { { .role = "dbclk", .clk = "gpio5_dbck", }, }; -static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = { - &omap3xxx_l4_per__gpio5, -}; - static struct omap_hwmod omap3xxx_gpio5_hwmod = { .name = "gpio5", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, @@ -2104,8 +975,6 @@ static struct omap_hwmod omap3xxx_gpio5_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPIO5_SHIFT, }, }, - .slaves = omap3xxx_gpio5_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio5_slaves), .class = &omap3xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, }; @@ -2120,10 +989,6 @@ static struct omap_hwmod_opt_clk gpio6_opt_clks[] = { { .role = "dbclk", .clk = "gpio6_dbck", }, }; -static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = { - &omap3xxx_l4_per__gpio6, -}; - static struct omap_hwmod omap3xxx_gpio6_hwmod = { .name = "gpio6", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, @@ -2140,20 +1005,10 @@ static struct omap_hwmod omap3xxx_gpio6_hwmod = { .idlest_idle_bit = OMAP3430_ST_GPIO6_SHIFT, }, }, - .slaves = omap3xxx_gpio6_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio6_slaves), .class = &omap3xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, }; -/* dma_system -> L3 */ -static struct omap_hwmod_ocp_if omap3xxx_dma_system__l3 = { - .master = &omap3xxx_dma_system_hwmod, - .slave = &omap3xxx_l3_main_hwmod, - .clk = "core_l3_ick", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* dma attributes */ static struct omap_dma_dev_attr dma_dev_attr = { .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY | @@ -2180,34 +1035,6 @@ static struct omap_hwmod_class omap3xxx_dma_hwmod_class = { }; /* dma_system */ -static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = { - { - .pa_start = 0x48056000, - .pa_end = 0x48056fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* dma_system master ports */ -static struct omap_hwmod_ocp_if *omap3xxx_dma_system_masters[] = { - &omap3xxx_dma_system__l3, -}; - -/* l4_cfg -> dma_system */ -static struct omap_hwmod_ocp_if omap3xxx_l4_core__dma_system = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_dma_system_hwmod, - .clk = "core_l4_ick", - .addr = omap3xxx_dma_system_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dma_system slave ports */ -static struct omap_hwmod_ocp_if *omap3xxx_dma_system_slaves[] = { - &omap3xxx_l4_core__dma_system, -}; - static struct omap_hwmod omap3xxx_dma_system_hwmod = { .name = "dma", .class = &omap3xxx_dma_hwmod_class, @@ -2222,10 +1049,6 @@ static struct omap_hwmod omap3xxx_dma_system_hwmod = { .idlest_idle_bit = OMAP3430_ST_SDMA_SHIFT, }, }, - .slaves = omap3xxx_dma_system_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_dma_system_slaves), - .masters = omap3xxx_dma_system_masters, - .masters_cnt = ARRAY_SIZE(omap3xxx_dma_system_masters), .dev_attr = &dma_dev_attr, .flags = HWMOD_NO_IDLEST, }; @@ -2258,30 +1081,6 @@ static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = { { .irq = -1 } }; -static struct omap_hwmod_addr_space omap3xxx_mcbsp1_addrs[] = { - { - .name = "mpu", - .pa_start = 0x48074000, - .pa_end = 0x480740ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_core -> mcbsp1 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp1 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_mcbsp1_hwmod, - .clk = "mcbsp1_ick", - .addr = omap3xxx_mcbsp1_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mcbsp1 slave ports */ -static struct omap_hwmod_ocp_if *omap3xxx_mcbsp1_slaves[] = { - &omap3xxx_l4_core__mcbsp1, -}; - static struct omap_hwmod omap3xxx_mcbsp1_hwmod = { .name = "mcbsp1", .class = &omap3xxx_mcbsp_hwmod_class, @@ -2297,8 +1096,6 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP1_SHIFT, }, }, - .slaves = omap3xxx_mcbsp1_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp1_slaves), }; /* mcbsp2 */ @@ -2309,30 +1106,6 @@ static struct omap_hwmod_irq_info omap3xxx_mcbsp2_irqs[] = { { .irq = -1 } }; -static struct omap_hwmod_addr_space omap3xxx_mcbsp2_addrs[] = { - { - .name = "mpu", - .pa_start = 0x49022000, - .pa_end = 0x490220ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> mcbsp2 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2 = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_mcbsp2_hwmod, - .clk = "mcbsp2_ick", - .addr = omap3xxx_mcbsp2_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mcbsp2 slave ports */ -static struct omap_hwmod_ocp_if *omap3xxx_mcbsp2_slaves[] = { - &omap3xxx_l4_per__mcbsp2, -}; - static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = { .sidetone = "mcbsp2_sidetone", }; @@ -2352,8 +1125,6 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT, }, }, - .slaves = omap3xxx_mcbsp2_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_slaves), .dev_attr = &omap34xx_mcbsp2_dev_attr, }; @@ -2365,32 +1136,8 @@ static struct omap_hwmod_irq_info omap3xxx_mcbsp3_irqs[] = { { .irq = -1 } }; -static struct omap_hwmod_addr_space omap3xxx_mcbsp3_addrs[] = { - { - .name = "mpu", - .pa_start = 0x49024000, - .pa_end = 0x490240ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> mcbsp3 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3 = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_mcbsp3_hwmod, - .clk = "mcbsp3_ick", - .addr = omap3xxx_mcbsp3_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mcbsp3 slave ports */ -static struct omap_hwmod_ocp_if *omap3xxx_mcbsp3_slaves[] = { - &omap3xxx_l4_per__mcbsp3, -}; - static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = { - .sidetone = "mcbsp3_sidetone", + .sidetone = "mcbsp3_sidetone", }; static struct omap_hwmod omap3xxx_mcbsp3_hwmod = { @@ -2408,8 +1155,6 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT, }, }, - .slaves = omap3xxx_mcbsp3_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_slaves), .dev_attr = &omap34xx_mcbsp3_dev_attr, }; @@ -2427,30 +1172,6 @@ static struct omap_hwmod_dma_info omap3xxx_mcbsp4_sdma_chs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap3xxx_mcbsp4_addrs[] = { - { - .name = "mpu", - .pa_start = 0x49026000, - .pa_end = 0x490260ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> mcbsp4 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp4 = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_mcbsp4_hwmod, - .clk = "mcbsp4_ick", - .addr = omap3xxx_mcbsp4_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mcbsp4 slave ports */ -static struct omap_hwmod_ocp_if *omap3xxx_mcbsp4_slaves[] = { - &omap3xxx_l4_per__mcbsp4, -}; - static struct omap_hwmod omap3xxx_mcbsp4_hwmod = { .name = "mcbsp4", .class = &omap3xxx_mcbsp_hwmod_class, @@ -2466,8 +1187,6 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP4_SHIFT, }, }, - .slaves = omap3xxx_mcbsp4_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp4_slaves), }; /* mcbsp5 */ @@ -2484,30 +1203,6 @@ static struct omap_hwmod_dma_info omap3xxx_mcbsp5_sdma_chs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap3xxx_mcbsp5_addrs[] = { - { - .name = "mpu", - .pa_start = 0x48096000, - .pa_end = 0x480960ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_core -> mcbsp5 */ -static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp5 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_mcbsp5_hwmod, - .clk = "mcbsp5_ick", - .addr = omap3xxx_mcbsp5_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mcbsp5 slave ports */ -static struct omap_hwmod_ocp_if *omap3xxx_mcbsp5_slaves[] = { - &omap3xxx_l4_core__mcbsp5, -}; - static struct omap_hwmod omap3xxx_mcbsp5_hwmod = { .name = "mcbsp5", .class = &omap3xxx_mcbsp_hwmod_class, @@ -2523,11 +1218,9 @@ static struct omap_hwmod omap3xxx_mcbsp5_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP5_SHIFT, }, }, - .slaves = omap3xxx_mcbsp5_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp5_slaves), }; -/* 'mcbsp sidetone' class */ +/* 'mcbsp sidetone' class */ static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sidetone_sysc = { .sysc_offs = 0x0010, .sysc_flags = SYSC_HAS_AUTOIDLE, @@ -2545,30 +1238,6 @@ static struct omap_hwmod_irq_info omap3xxx_mcbsp2_sidetone_irqs[] = { { .irq = -1 } }; -static struct omap_hwmod_addr_space omap3xxx_mcbsp2_sidetone_addrs[] = { - { - .name = "sidetone", - .pa_start = 0x49028000, - .pa_end = 0x490280ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> mcbsp2_sidetone */ -static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2_sidetone = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_mcbsp2_sidetone_hwmod, - .clk = "mcbsp2_ick", - .addr = omap3xxx_mcbsp2_sidetone_addrs, - .user = OCP_USER_MPU, -}; - -/* mcbsp2_sidetone slave ports */ -static struct omap_hwmod_ocp_if *omap3xxx_mcbsp2_sidetone_slaves[] = { - &omap3xxx_l4_per__mcbsp2_sidetone, -}; - static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = { .name = "mcbsp2_sidetone", .class = &omap3xxx_mcbsp_sidetone_hwmod_class, @@ -2583,8 +1252,6 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT, }, }, - .slaves = omap3xxx_mcbsp2_sidetone_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_sidetone_slaves), }; /* mcbsp3_sidetone */ @@ -2593,30 +1260,6 @@ static struct omap_hwmod_irq_info omap3xxx_mcbsp3_sidetone_irqs[] = { { .irq = -1 } }; -static struct omap_hwmod_addr_space omap3xxx_mcbsp3_sidetone_addrs[] = { - { - .name = "sidetone", - .pa_start = 0x4902A000, - .pa_end = 0x4902A0ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> mcbsp3_sidetone */ -static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3_sidetone = { - .master = &omap3xxx_l4_per_hwmod, - .slave = &omap3xxx_mcbsp3_sidetone_hwmod, - .clk = "mcbsp3_ick", - .addr = omap3xxx_mcbsp3_sidetone_addrs, - .user = OCP_USER_MPU, -}; - -/* mcbsp3_sidetone slave ports */ -static struct omap_hwmod_ocp_if *omap3xxx_mcbsp3_sidetone_slaves[] = { - &omap3xxx_l4_per__mcbsp3_sidetone, -}; - static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = { .name = "mcbsp3_sidetone", .class = &omap3xxx_mcbsp_sidetone_hwmod_class, @@ -2631,11 +1274,8 @@ static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = { .idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT, }, }, - .slaves = omap3xxx_mcbsp3_sidetone_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_sidetone_slaves), }; - /* SR common */ static struct omap_hwmod_sysc_fields omap34xx_sr_sysc_fields = { .clkact_shift = 20, @@ -2656,7 +1296,7 @@ static struct omap_hwmod_class omap34xx_smartreflex_hwmod_class = { static struct omap_hwmod_sysc_fields omap36xx_sr_sysc_fields = { .sidle_shift = 24, - .enwkup_shift = 26 + .enwkup_shift = 26, }; static struct omap_hwmod_class_sysconfig omap36xx_sr_sysc = { @@ -2678,12 +1318,13 @@ static struct omap_smartreflex_dev_attr sr1_dev_attr = { .sensor_voltdm_name = "mpu_iva", }; -static struct omap_hwmod_ocp_if *omap3_sr1_slaves[] = { - &omap3_l4_core__sr1, +static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = { + { .irq = 18 }, + { .irq = -1 } }; static struct omap_hwmod omap34xx_sr1_hwmod = { - .name = "sr1_hwmod", + .name = "sr1", .class = &omap34xx_smartreflex_hwmod_class, .main_clk = "sr1_fck", .prcm = { @@ -2695,15 +1336,13 @@ static struct omap_hwmod omap34xx_sr1_hwmod = { .idlest_idle_bit = OMAP3430_EN_SR1_SHIFT, }, }, - .slaves = omap3_sr1_slaves, - .slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves), .dev_attr = &sr1_dev_attr, .mpu_irqs = omap3_smartreflex_mpu_irqs, .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; static struct omap_hwmod omap36xx_sr1_hwmod = { - .name = "sr1_hwmod", + .name = "sr1", .class = &omap36xx_smartreflex_hwmod_class, .main_clk = "sr1_fck", .prcm = { @@ -2715,8 +1354,6 @@ static struct omap_hwmod omap36xx_sr1_hwmod = { .idlest_idle_bit = OMAP3430_EN_SR1_SHIFT, }, }, - .slaves = omap3_sr1_slaves, - .slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves), .dev_attr = &sr1_dev_attr, .mpu_irqs = omap3_smartreflex_mpu_irqs, }; @@ -2726,12 +1363,13 @@ static struct omap_smartreflex_dev_attr sr2_dev_attr = { .sensor_voltdm_name = "core", }; -static struct omap_hwmod_ocp_if *omap3_sr2_slaves[] = { - &omap3_l4_core__sr2, +static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = { + { .irq = 19 }, + { .irq = -1 } }; static struct omap_hwmod omap34xx_sr2_hwmod = { - .name = "sr2_hwmod", + .name = "sr2", .class = &omap34xx_smartreflex_hwmod_class, .main_clk = "sr2_fck", .prcm = { @@ -2743,15 +1381,13 @@ static struct omap_hwmod omap34xx_sr2_hwmod = { .idlest_idle_bit = OMAP3430_EN_SR2_SHIFT, }, }, - .slaves = omap3_sr2_slaves, - .slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves), .dev_attr = &sr2_dev_attr, .mpu_irqs = omap3_smartreflex_core_irqs, .flags = HWMOD_SET_DEFAULT_CLOCKACT, }; static struct omap_hwmod omap36xx_sr2_hwmod = { - .name = "sr2_hwmod", + .name = "sr2", .class = &omap36xx_smartreflex_hwmod_class, .main_clk = "sr2_fck", .prcm = { @@ -2763,8 +1399,6 @@ static struct omap_hwmod omap36xx_sr2_hwmod = { .idlest_idle_bit = OMAP3430_EN_SR2_SHIFT, }, }, - .slaves = omap3_sr2_slaves, - .slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves), .dev_attr = &sr2_dev_attr, .mpu_irqs = omap3_smartreflex_core_irqs, }; @@ -2790,34 +1424,11 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = { .sysc = &omap3xxx_mailbox_sysc, }; -static struct omap_hwmod omap3xxx_mailbox_hwmod; static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = { { .irq = 26 }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap3xxx_mailbox_addrs[] = { - { - .pa_start = 0x48094000, - .pa_end = 0x480941ff, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -/* l4_core -> mailbox */ -static struct omap_hwmod_ocp_if omap3xxx_l4_core__mailbox = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_mailbox_hwmod, - .addr = omap3xxx_mailbox_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mailbox slave ports */ -static struct omap_hwmod_ocp_if *omap3xxx_mailbox_slaves[] = { - &omap3xxx_l4_core__mailbox, -}; - static struct omap_hwmod omap3xxx_mailbox_hwmod = { .name = "mailbox", .class = &omap3xxx_mailbox_hwmod_class, @@ -2832,53 +1443,6 @@ static struct omap_hwmod omap3xxx_mailbox_hwmod = { .idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT, }, }, - .slaves = omap3xxx_mailbox_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_mailbox_slaves), -}; - -/* l4 core -> mcspi1 interface */ -static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi1 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap34xx_mcspi1, - .clk = "mcspi1_ick", - .addr = omap2_mcspi1_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4 core -> mcspi2 interface */ -static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi2 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap34xx_mcspi2, - .clk = "mcspi2_ick", - .addr = omap2_mcspi2_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4 core -> mcspi3 interface */ -static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi3 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap34xx_mcspi3, - .clk = "mcspi3_ick", - .addr = omap2430_mcspi3_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4 core -> mcspi4 interface */ -static struct omap_hwmod_addr_space omap34xx_mcspi4_addr_space[] = { - { - .pa_start = 0x480ba000, - .pa_end = 0x480ba0ff, - .flags = ADDR_TYPE_RT, - }, - { } -}; - -static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi4 = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap34xx_mcspi4, - .clk = "mcspi4_ick", - .addr = omap34xx_mcspi4_addr_space, - .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* @@ -2905,10 +1469,6 @@ static struct omap_hwmod_class omap34xx_mcspi_class = { }; /* mcspi1 */ -static struct omap_hwmod_ocp_if *omap34xx_mcspi1_slaves[] = { - &omap34xx_l4_core__mcspi1, -}; - static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = { .num_chipselect = 4, }; @@ -2927,17 +1487,11 @@ static struct omap_hwmod omap34xx_mcspi1 = { .idlest_idle_bit = OMAP3430_ST_MCSPI1_SHIFT, }, }, - .slaves = omap34xx_mcspi1_slaves, - .slaves_cnt = ARRAY_SIZE(omap34xx_mcspi1_slaves), .class = &omap34xx_mcspi_class, .dev_attr = &omap_mcspi1_dev_attr, }; /* mcspi2 */ -static struct omap_hwmod_ocp_if *omap34xx_mcspi2_slaves[] = { - &omap34xx_l4_core__mcspi2, -}; - static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = { .num_chipselect = 2, }; @@ -2956,8 +1510,6 @@ static struct omap_hwmod omap34xx_mcspi2 = { .idlest_idle_bit = OMAP3430_ST_MCSPI2_SHIFT, }, }, - .slaves = omap34xx_mcspi2_slaves, - .slaves_cnt = ARRAY_SIZE(omap34xx_mcspi2_slaves), .class = &omap34xx_mcspi_class, .dev_attr = &omap_mcspi2_dev_attr, }; @@ -2976,10 +1528,6 @@ static struct omap_hwmod_dma_info omap34xx_mcspi3_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_ocp_if *omap34xx_mcspi3_slaves[] = { - &omap34xx_l4_core__mcspi3, -}; - static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = { .num_chipselect = 2, }; @@ -2998,13 +1546,11 @@ static struct omap_hwmod omap34xx_mcspi3 = { .idlest_idle_bit = OMAP3430_ST_MCSPI3_SHIFT, }, }, - .slaves = omap34xx_mcspi3_slaves, - .slaves_cnt = ARRAY_SIZE(omap34xx_mcspi3_slaves), .class = &omap34xx_mcspi_class, .dev_attr = &omap_mcspi3_dev_attr, }; -/* SPI4 */ +/* mcspi4 */ static struct omap_hwmod_irq_info omap34xx_mcspi4_mpu_irqs[] = { { .name = "irq", .irq = INT_34XX_SPI4_IRQ }, /* 48 */ { .irq = -1 } @@ -3016,10 +1562,6 @@ static struct omap_hwmod_dma_info omap34xx_mcspi4_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_ocp_if *omap34xx_mcspi4_slaves[] = { - &omap34xx_l4_core__mcspi4, -}; - static struct omap2_mcspi_dev_attr omap_mcspi4_dev_attr = { .num_chipselect = 1, }; @@ -3038,15 +1580,11 @@ static struct omap_hwmod omap34xx_mcspi4 = { .idlest_idle_bit = OMAP3430_ST_MCSPI4_SHIFT, }, }, - .slaves = omap34xx_mcspi4_slaves, - .slaves_cnt = ARRAY_SIZE(omap34xx_mcspi4_slaves), .class = &omap34xx_mcspi_class, .dev_attr = &omap_mcspi4_dev_attr, }; -/* - * usbhsotg - */ +/* usbhsotg */ static struct omap_hwmod_class_sysconfig omap3xxx_usbhsotg_sysc = { .rev_offs = 0x0400, .sysc_offs = 0x0404, @@ -3063,6 +1601,7 @@ static struct omap_hwmod_class usbotg_class = { .name = "usbotg", .sysc = &omap3xxx_usbhsotg_sysc, }; + /* usb_otg_hs */ static struct omap_hwmod_irq_info omap3xxx_usbhsotg_mpu_irqs[] = { @@ -3085,10 +1624,6 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { .idlest_stdby_bit = OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT }, }, - .masters = omap3xxx_usbhsotg_masters, - .masters_cnt = ARRAY_SIZE(omap3xxx_usbhsotg_masters), - .slaves = omap3xxx_usbhsotg_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_usbhsotg_slaves), .class = &usbotg_class, /* @@ -3120,15 +1655,10 @@ static struct omap_hwmod am35xx_usbhsotg_hwmod = { .omap2 = { }, }, - .masters = am35xx_usbhsotg_masters, - .masters_cnt = ARRAY_SIZE(am35xx_usbhsotg_masters), - .slaves = am35xx_usbhsotg_slaves, - .slaves_cnt = ARRAY_SIZE(am35xx_usbhsotg_slaves), .class = &am35xx_usbotg_class, }; /* MMC/SD/SDIO common */ - static struct omap_hwmod_class_sysconfig omap34xx_mmc_sysc = { .rev_offs = 0x1fc, .sysc_offs = 0x10, @@ -3162,10 +1692,6 @@ static struct omap_hwmod_opt_clk omap34xx_mmc1_opt_clks[] = { { .role = "dbck", .clk = "omap_32k_fck", }, }; -static struct omap_hwmod_ocp_if *omap3xxx_mmc1_slaves[] = { - &omap3xxx_l4_core__mmc1, -}; - static struct omap_mmc_dev_attr mmc1_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; @@ -3193,8 +1719,6 @@ static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = { }, }, .dev_attr = &mmc1_pre_es3_dev_attr, - .slaves = omap3xxx_mmc1_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc1_slaves), .class = &omap34xx_mmc_class, }; @@ -3215,8 +1739,6 @@ static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = { }, }, .dev_attr = &mmc1_dev_attr, - .slaves = omap3xxx_mmc1_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc1_slaves), .class = &omap34xx_mmc_class, }; @@ -3237,10 +1759,6 @@ static struct omap_hwmod_opt_clk omap34xx_mmc2_opt_clks[] = { { .role = "dbck", .clk = "omap_32k_fck", }, }; -static struct omap_hwmod_ocp_if *omap3xxx_mmc2_slaves[] = { - &omap3xxx_l4_core__mmc2, -}; - /* See 35xx errata 2.1.1.128 in SPRZ278F */ static struct omap_mmc_dev_attr mmc2_pre_es3_dev_attr = { .flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ, @@ -3263,8 +1781,6 @@ static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = { }, }, .dev_attr = &mmc2_pre_es3_dev_attr, - .slaves = omap3xxx_mmc2_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc2_slaves), .class = &omap34xx_mmc_class, }; @@ -3284,8 +1800,6 @@ static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = { .idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT, }, }, - .slaves = omap3xxx_mmc2_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc2_slaves), .class = &omap34xx_mmc_class, }; @@ -3306,10 +1820,6 @@ static struct omap_hwmod_opt_clk omap34xx_mmc3_opt_clks[] = { { .role = "dbck", .clk = "omap_32k_fck", }, }; -static struct omap_hwmod_ocp_if *omap3xxx_mmc3_slaves[] = { - &omap3xxx_l4_core__mmc3, -}; - static struct omap_hwmod omap3xxx_mmc3_hwmod = { .name = "mmc3", .mpu_irqs = omap34xx_mmc3_mpu_irqs, @@ -3325,8 +1835,6 @@ static struct omap_hwmod omap3xxx_mmc3_hwmod = { .idlest_idle_bit = OMAP3430_ST_MMC3_SHIFT, }, }, - .slaves = omap3xxx_mmc3_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc3_slaves), .class = &omap34xx_mmc_class, }; @@ -3334,12 +1842,6 @@ static struct omap_hwmod omap3xxx_mmc3_hwmod = { * 'usb_host_hs' class * high-speed multi-port usb host controller */ -static struct omap_hwmod_ocp_if omap3xxx_usb_host_hs__l3_main_2 = { - .master = &omap3xxx_usb_host_hs_hwmod, - .slave = &omap3xxx_l3_main_hwmod, - .clk = "core_l3_ick", - .user = OCP_USER_MPU, -}; static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = { .rev_offs = 0x0000, @@ -3358,42 +1860,6 @@ static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = { .sysc = &omap3xxx_usb_host_hs_sysc, }; -static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_masters[] = { - &omap3xxx_usb_host_hs__l3_main_2, -}; - -static struct omap_hwmod_addr_space omap3xxx_usb_host_hs_addrs[] = { - { - .name = "uhh", - .pa_start = 0x48064000, - .pa_end = 0x480643ff, - .flags = ADDR_TYPE_RT - }, - { - .name = "ohci", - .pa_start = 0x48064400, - .pa_end = 0x480647ff, - }, - { - .name = "ehci", - .pa_start = 0x48064800, - .pa_end = 0x48064cff, - }, - {} -}; - -static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_host_hs = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_usb_host_hs_hwmod, - .clk = "usbhost_ick", - .addr = omap3xxx_usb_host_hs_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_slaves[] = { - &omap3xxx_l4_core__usb_host_hs, -}; - static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = { { .role = "ehci_logic_fck", .clk = "usbhost_120m_fck", }, }; @@ -3422,10 +1888,6 @@ static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = { }, .opt_clks = omap3xxx_usb_host_hs_opt_clks, .opt_clks_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_opt_clks), - .slaves = omap3xxx_usb_host_hs_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_slaves), - .masters = omap3xxx_usb_host_hs_masters, - .masters_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_masters), /* * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock @@ -3501,6 +1963,1084 @@ static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = { { .irq = -1 } }; +static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = { + .name = "usb_tll_hs", + .class = &omap3xxx_usb_tll_hs_hwmod_class, + .clkdm_name = "l3_init_clkdm", + .mpu_irqs = omap3xxx_usb_tll_hs_irqs, + .main_clk = "usbtll_fck", + .prcm = { + .omap2 = { + .module_offs = CORE_MOD, + .prcm_reg_id = 3, + .module_bit = OMAP3430ES2_EN_USBTLL_SHIFT, + .idlest_reg_id = 3, + .idlest_idle_bit = OMAP3430ES2_ST_USBTLL_SHIFT, + }, + }, +}; + +/* + * interfaces + */ + +/* L3 -> L4_CORE interface */ +static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = { + .master = &omap3xxx_l3_main_hwmod, + .slave = &omap3xxx_l4_core_hwmod, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L3 -> L4_PER interface */ +static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_per = { + .master = &omap3xxx_l3_main_hwmod, + .slave = &omap3xxx_l4_per_hwmod, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap3xxx_l3_main_addrs[] = { + { + .pa_start = 0x68000000, + .pa_end = 0x6800ffff, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +/* MPU -> L3 interface */ +static struct omap_hwmod_ocp_if omap3xxx_mpu__l3_main = { + .master = &omap3xxx_mpu_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .addr = omap3xxx_l3_main_addrs, + .user = OCP_USER_MPU, +}; + +/* DSS -> l3 */ +static struct omap_hwmod_ocp_if omap3430es1_dss__l3 = { + .master = &omap3430es1_dss_core_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = { + .master = &omap3xxx_dss_core_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .fw = { + .omap2 = { + .l3_perm_bit = OMAP3_L3_CORE_FW_INIT_ID_DSS, + .flags = OMAP_FIREWALL_L3, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_core -> usbhsotg interface */ +static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = { + .master = &omap3xxx_usbhsotg_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "core_l3_ick", + .user = OCP_USER_MPU, +}; + +/* l3_core -> am35xx_usbhsotg interface */ +static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = { + .master = &am35xx_usbhsotg_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "core_l3_ick", + .user = OCP_USER_MPU, +}; +/* L4_CORE -> L4_WKUP interface */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_l4_wkup_hwmod, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 CORE -> MMC1 interface */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__pre_es3_mmc1 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_pre_es3_mmc1_hwmod, + .clk = "mmchs1_ick", + .addr = omap2430_mmc1_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, + .flags = OMAP_FIREWALL_L4 +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__es3plus_mmc1 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_es3plus_mmc1_hwmod, + .clk = "mmchs1_ick", + .addr = omap2430_mmc1_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, + .flags = OMAP_FIREWALL_L4 +}; + +/* L4 CORE -> MMC2 interface */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__pre_es3_mmc2 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_pre_es3_mmc2_hwmod, + .clk = "mmchs2_ick", + .addr = omap2430_mmc2_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, + .flags = OMAP_FIREWALL_L4 +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__es3plus_mmc2 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_es3plus_mmc2_hwmod, + .clk = "mmchs2_ick", + .addr = omap2430_mmc2_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, + .flags = OMAP_FIREWALL_L4 +}; + +/* L4 CORE -> MMC3 interface */ +static struct omap_hwmod_addr_space omap3xxx_mmc3_addr_space[] = { + { + .pa_start = 0x480ad000, + .pa_end = 0x480ad1ff, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc3 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_mmc3_hwmod, + .clk = "mmchs3_ick", + .addr = omap3xxx_mmc3_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, + .flags = OMAP_FIREWALL_L4 +}; + +/* L4 CORE -> UART1 interface */ +static struct omap_hwmod_addr_space omap3xxx_uart1_addr_space[] = { + { + .pa_start = OMAP3_UART1_BASE, + .pa_end = OMAP3_UART1_BASE + SZ_8K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, + { } +}; + +static struct omap_hwmod_ocp_if omap3_l4_core__uart1 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_uart1_hwmod, + .clk = "uart1_ick", + .addr = omap3xxx_uart1_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 CORE -> UART2 interface */ +static struct omap_hwmod_addr_space omap3xxx_uart2_addr_space[] = { + { + .pa_start = OMAP3_UART2_BASE, + .pa_end = OMAP3_UART2_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, + { } +}; + +static struct omap_hwmod_ocp_if omap3_l4_core__uart2 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_uart2_hwmod, + .clk = "uart2_ick", + .addr = omap3xxx_uart2_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 PER -> UART3 interface */ +static struct omap_hwmod_addr_space omap3xxx_uart3_addr_space[] = { + { + .pa_start = OMAP3_UART3_BASE, + .pa_end = OMAP3_UART3_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, + { } +}; + +static struct omap_hwmod_ocp_if omap3_l4_per__uart3 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_uart3_hwmod, + .clk = "uart3_ick", + .addr = omap3xxx_uart3_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 PER -> UART4 interface */ +static struct omap_hwmod_addr_space omap36xx_uart4_addr_space[] = { + { + .pa_start = OMAP3_UART4_BASE, + .pa_end = OMAP3_UART4_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, + { } +}; + +static struct omap_hwmod_ocp_if omap36xx_l4_per__uart4 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap36xx_uart4_hwmod, + .clk = "uart4_ick", + .addr = omap36xx_uart4_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* AM35xx: L4 CORE -> UART4 interface */ +static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = { + { + .pa_start = OMAP3_UART4_AM35XX_BASE, + .pa_end = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, +}; + +static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &am35xx_uart4_hwmod, + .clk = "uart4_ick", + .addr = am35xx_uart4_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 CORE -> I2C1 interface */ +static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_i2c1_hwmod, + .clk = "i2c1_ick", + .addr = omap2_i2c1_addr_space, + .fw = { + .omap2 = { + .l4_fw_region = OMAP3_L4_CORE_FW_I2C1_REGION, + .l4_prot_group = 7, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 CORE -> I2C2 interface */ +static struct omap_hwmod_ocp_if omap3_l4_core__i2c2 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_i2c2_hwmod, + .clk = "i2c2_ick", + .addr = omap2_i2c2_addr_space, + .fw = { + .omap2 = { + .l4_fw_region = OMAP3_L4_CORE_FW_I2C2_REGION, + .l4_prot_group = 7, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 CORE -> I2C3 interface */ +static struct omap_hwmod_addr_space omap3xxx_i2c3_addr_space[] = { + { + .pa_start = 0x48060000, + .pa_end = 0x48060000 + SZ_128 - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_i2c3_hwmod, + .clk = "i2c3_ick", + .addr = omap3xxx_i2c3_addr_space, + .fw = { + .omap2 = { + .l4_fw_region = OMAP3_L4_CORE_FW_I2C3_REGION, + .l4_prot_group = 7, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* L4 CORE -> SR1 interface */ +static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = { + { + .pa_start = OMAP34XX_SR1_BASE, + .pa_end = OMAP34XX_SR1_BASE + SZ_1K - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +static struct omap_hwmod_ocp_if omap34xx_l4_core__sr1 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap34xx_sr1_hwmod, + .clk = "sr_l4_ick", + .addr = omap3_sr1_addr_space, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if omap36xx_l4_core__sr1 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap36xx_sr1_hwmod, + .clk = "sr_l4_ick", + .addr = omap3_sr1_addr_space, + .user = OCP_USER_MPU, +}; + +/* L4 CORE -> SR1 interface */ +static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = { + { + .pa_start = OMAP34XX_SR2_BASE, + .pa_end = OMAP34XX_SR2_BASE + SZ_1K - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +static struct omap_hwmod_ocp_if omap34xx_l4_core__sr2 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap34xx_sr2_hwmod, + .clk = "sr_l4_ick", + .addr = omap3_sr2_addr_space, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_ocp_if omap36xx_l4_core__sr2 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap36xx_sr2_hwmod, + .clk = "sr_l4_ick", + .addr = omap3_sr2_addr_space, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap3xxx_usbhsotg_addrs[] = { + { + .pa_start = OMAP34XX_HSUSB_OTG_BASE, + .pa_end = OMAP34XX_HSUSB_OTG_BASE + SZ_4K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_core -> usbhsotg */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__usbhsotg = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_usbhsotg_hwmod, + .clk = "l4_ick", + .addr = omap3xxx_usbhsotg_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space am35xx_usbhsotg_addrs[] = { + { + .pa_start = AM35XX_IPSS_USBOTGSS_BASE, + .pa_end = AM35XX_IPSS_USBOTGSS_BASE + SZ_4K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_core -> usbhsotg */ +static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &am35xx_usbhsotg_hwmod, + .clk = "l4_ick", + .addr = am35xx_usbhsotg_addrs, + .user = OCP_USER_MPU, +}; + +/* L4_WKUP -> L4_SEC interface */ +static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__l4_sec = { + .master = &omap3xxx_l4_wkup_hwmod, + .slave = &omap3xxx_l4_sec_hwmod, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* IVA2 <- L3 interface */ +static struct omap_hwmod_ocp_if omap3xxx_l3__iva = { + .master = &omap3xxx_l3_main_hwmod, + .slave = &omap3xxx_iva_hwmod, + .clk = "core_l3_ick", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer1_addrs[] = { + { + .pa_start = 0x48318000, + .pa_end = 0x48318000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_wkup -> timer1 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__timer1 = { + .master = &omap3xxx_l4_wkup_hwmod, + .slave = &omap3xxx_timer1_hwmod, + .clk = "gpt1_ick", + .addr = omap3xxx_timer1_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer2_addrs[] = { + { + .pa_start = 0x49032000, + .pa_end = 0x49032000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> timer2 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer2 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_timer2_hwmod, + .clk = "gpt2_ick", + .addr = omap3xxx_timer2_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer3_addrs[] = { + { + .pa_start = 0x49034000, + .pa_end = 0x49034000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> timer3 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer3 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_timer3_hwmod, + .clk = "gpt3_ick", + .addr = omap3xxx_timer3_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer4_addrs[] = { + { + .pa_start = 0x49036000, + .pa_end = 0x49036000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> timer4 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer4 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_timer4_hwmod, + .clk = "gpt4_ick", + .addr = omap3xxx_timer4_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer5_addrs[] = { + { + .pa_start = 0x49038000, + .pa_end = 0x49038000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> timer5 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer5 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_timer5_hwmod, + .clk = "gpt5_ick", + .addr = omap3xxx_timer5_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer6_addrs[] = { + { + .pa_start = 0x4903A000, + .pa_end = 0x4903A000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> timer6 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer6 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_timer6_hwmod, + .clk = "gpt6_ick", + .addr = omap3xxx_timer6_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer7_addrs[] = { + { + .pa_start = 0x4903C000, + .pa_end = 0x4903C000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> timer7 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer7 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_timer7_hwmod, + .clk = "gpt7_ick", + .addr = omap3xxx_timer7_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer8_addrs[] = { + { + .pa_start = 0x4903E000, + .pa_end = 0x4903E000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> timer8 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer8 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_timer8_hwmod, + .clk = "gpt8_ick", + .addr = omap3xxx_timer8_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer9_addrs[] = { + { + .pa_start = 0x49040000, + .pa_end = 0x49040000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> timer9 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer9 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_timer9_hwmod, + .clk = "gpt9_ick", + .addr = omap3xxx_timer9_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> timer10 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer10 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_timer10_hwmod, + .clk = "gpt10_ick", + .addr = omap2_timer10_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> timer11 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer11 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_timer11_hwmod, + .clk = "gpt11_ick", + .addr = omap2_timer11_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap3xxx_timer12_addrs[] = { + { + .pa_start = 0x48304000, + .pa_end = 0x48304000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_core -> timer12 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_sec__timer12 = { + .master = &omap3xxx_l4_sec_hwmod, + .slave = &omap3xxx_timer12_hwmod, + .clk = "gpt12_ick", + .addr = omap3xxx_timer12_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup -> wd_timer2 */ +static struct omap_hwmod_addr_space omap3xxx_wd_timer2_addrs[] = { + { + .pa_start = 0x48314000, + .pa_end = 0x4831407f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__wd_timer2 = { + .master = &omap3xxx_l4_wkup_hwmod, + .slave = &omap3xxx_wd_timer2_hwmod, + .clk = "wdt2_ick", + .addr = omap3xxx_wd_timer2_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> dss */ +static struct omap_hwmod_ocp_if omap3430es1_l4_core__dss = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3430es1_dss_core_hwmod, + .clk = "dss_ick", + .addr = omap2_dss_addrs, + .fw = { + .omap2 = { + .l4_fw_region = OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION, + .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_dss_core_hwmod, + .clk = "dss_ick", + .addr = omap2_dss_addrs, + .fw = { + .omap2 = { + .l4_fw_region = OMAP3_L4_CORE_FW_DSS_CORE_REGION, + .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> dss_dispc */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_dss_dispc_hwmod, + .clk = "dss_ick", + .addr = omap2_dss_dispc_addrs, + .fw = { + .omap2 = { + .l4_fw_region = OMAP3_L4_CORE_FW_DSS_DISPC_REGION, + .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = { + { + .pa_start = 0x4804FC00, + .pa_end = 0x4804FFFF, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_core -> dss_dsi1 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_dss_dsi1_hwmod, + .clk = "dss_ick", + .addr = omap3xxx_dss_dsi1_addrs, + .fw = { + .omap2 = { + .l4_fw_region = OMAP3_L4_CORE_FW_DSS_DSI_REGION, + .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> dss_rfbi */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_rfbi = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_dss_rfbi_hwmod, + .clk = "dss_ick", + .addr = omap2_dss_rfbi_addrs, + .fw = { + .omap2 = { + .l4_fw_region = OMAP3_L4_CORE_FW_DSS_RFBI_REGION, + .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP , + .flags = OMAP_FIREWALL_L4, + } + }, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_core -> dss_venc */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_dss_venc_hwmod, + .clk = "dss_ick", + .addr = omap2_dss_venc_addrs, + .fw = { + .omap2 = { + .l4_fw_region = OMAP3_L4_CORE_FW_DSS_VENC_REGION, + .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP, + .flags = OMAP_FIREWALL_L4, + } + }, + .flags = OCPIF_SWSUP_IDLE, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup -> gpio1 */ +static struct omap_hwmod_addr_space omap3xxx_gpio1_addrs[] = { + { + .pa_start = 0x48310000, + .pa_end = 0x483101ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__gpio1 = { + .master = &omap3xxx_l4_wkup_hwmod, + .slave = &omap3xxx_gpio1_hwmod, + .addr = omap3xxx_gpio1_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> gpio2 */ +static struct omap_hwmod_addr_space omap3xxx_gpio2_addrs[] = { + { + .pa_start = 0x49050000, + .pa_end = 0x490501ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio2 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_gpio2_hwmod, + .addr = omap3xxx_gpio2_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> gpio3 */ +static struct omap_hwmod_addr_space omap3xxx_gpio3_addrs[] = { + { + .pa_start = 0x49052000, + .pa_end = 0x490521ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_gpio3_hwmod, + .addr = omap3xxx_gpio3_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> gpio4 */ +static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = { + { + .pa_start = 0x49054000, + .pa_end = 0x490541ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio4 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_gpio4_hwmod, + .addr = omap3xxx_gpio4_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> gpio5 */ +static struct omap_hwmod_addr_space omap3xxx_gpio5_addrs[] = { + { + .pa_start = 0x49056000, + .pa_end = 0x490561ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio5 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_gpio5_hwmod, + .addr = omap3xxx_gpio5_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per -> gpio6 */ +static struct omap_hwmod_addr_space omap3xxx_gpio6_addrs[] = { + { + .pa_start = 0x49058000, + .pa_end = 0x490581ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_gpio6_hwmod, + .addr = omap3xxx_gpio6_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dma_system -> L3 */ +static struct omap_hwmod_ocp_if omap3xxx_dma_system__l3 = { + .master = &omap3xxx_dma_system_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "core_l3_ick", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = { + { + .pa_start = 0x48056000, + .pa_end = 0x48056fff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_cfg -> dma_system */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__dma_system = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_dma_system_hwmod, + .clk = "core_l4_ick", + .addr = omap3xxx_dma_system_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap3xxx_mcbsp1_addrs[] = { + { + .name = "mpu", + .pa_start = 0x48074000, + .pa_end = 0x480740ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_core -> mcbsp1 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp1 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_mcbsp1_hwmod, + .clk = "mcbsp1_ick", + .addr = omap3xxx_mcbsp1_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap3xxx_mcbsp2_addrs[] = { + { + .name = "mpu", + .pa_start = 0x49022000, + .pa_end = 0x490220ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> mcbsp2 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_mcbsp2_hwmod, + .clk = "mcbsp2_ick", + .addr = omap3xxx_mcbsp2_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap3xxx_mcbsp3_addrs[] = { + { + .name = "mpu", + .pa_start = 0x49024000, + .pa_end = 0x490240ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> mcbsp3 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_mcbsp3_hwmod, + .clk = "mcbsp3_ick", + .addr = omap3xxx_mcbsp3_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap3xxx_mcbsp4_addrs[] = { + { + .name = "mpu", + .pa_start = 0x49026000, + .pa_end = 0x490260ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> mcbsp4 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp4 = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_mcbsp4_hwmod, + .clk = "mcbsp4_ick", + .addr = omap3xxx_mcbsp4_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap3xxx_mcbsp5_addrs[] = { + { + .name = "mpu", + .pa_start = 0x48096000, + .pa_end = 0x480960ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_core -> mcbsp5 */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp5 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_mcbsp5_hwmod, + .clk = "mcbsp5_ick", + .addr = omap3xxx_mcbsp5_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap3xxx_mcbsp2_sidetone_addrs[] = { + { + .name = "sidetone", + .pa_start = 0x49028000, + .pa_end = 0x490280ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> mcbsp2_sidetone */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2_sidetone = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_mcbsp2_sidetone_hwmod, + .clk = "mcbsp2_ick", + .addr = omap3xxx_mcbsp2_sidetone_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap3xxx_mcbsp3_sidetone_addrs[] = { + { + .name = "sidetone", + .pa_start = 0x4902A000, + .pa_end = 0x4902A0ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> mcbsp3_sidetone */ +static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3_sidetone = { + .master = &omap3xxx_l4_per_hwmod, + .slave = &omap3xxx_mcbsp3_sidetone_hwmod, + .clk = "mcbsp3_ick", + .addr = omap3xxx_mcbsp3_sidetone_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap3xxx_mailbox_addrs[] = { + { + .pa_start = 0x48094000, + .pa_end = 0x480941ff, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +/* l4_core -> mailbox */ +static struct omap_hwmod_ocp_if omap3xxx_l4_core__mailbox = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_mailbox_hwmod, + .addr = omap3xxx_mailbox_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 core -> mcspi1 interface */ +static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi1 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap34xx_mcspi1, + .clk = "mcspi1_ick", + .addr = omap2_mcspi1_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 core -> mcspi2 interface */ +static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi2 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap34xx_mcspi2, + .clk = "mcspi2_ick", + .addr = omap2_mcspi2_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 core -> mcspi3 interface */ +static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi3 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap34xx_mcspi3, + .clk = "mcspi3_ick", + .addr = omap2430_mcspi3_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4 core -> mcspi4 interface */ +static struct omap_hwmod_addr_space omap34xx_mcspi4_addr_space[] = { + { + .pa_start = 0x480ba000, + .pa_end = 0x480ba0ff, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi4 = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap34xx_mcspi4, + .clk = "mcspi4_ick", + .addr = omap34xx_mcspi4_addr_space, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if omap3xxx_usb_host_hs__l3_main_2 = { + .master = &omap3xxx_usb_host_hs_hwmod, + .slave = &omap3xxx_l3_main_hwmod, + .clk = "core_l3_ick", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap3xxx_usb_host_hs_addrs[] = { + { + .name = "uhh", + .pa_start = 0x48064000, + .pa_end = 0x480643ff, + .flags = ADDR_TYPE_RT + }, + { + .name = "ohci", + .pa_start = 0x48064400, + .pa_end = 0x480647ff, + }, + { + .name = "ehci", + .pa_start = 0x48064800, + .pa_end = 0x48064cff, + }, + {} +}; + +static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_host_hs = { + .master = &omap3xxx_l4_core_hwmod, + .slave = &omap3xxx_usb_host_hs_hwmod, + .clk = "usbhost_ick", + .addr = omap3xxx_usb_host_hs_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_addr_space omap3xxx_usb_tll_hs_addrs[] = { { .name = "tll", @@ -3519,183 +3059,156 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_tll_hs = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_ocp_if *omap3xxx_usb_tll_hs_slaves[] = { - &omap3xxx_l4_core__usb_tll_hs, -}; - -static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = { - .name = "usb_tll_hs", - .class = &omap3xxx_usb_tll_hs_hwmod_class, - .clkdm_name = "l3_init_clkdm", - .mpu_irqs = omap3xxx_usb_tll_hs_irqs, - .main_clk = "usbtll_fck", - .prcm = { - .omap2 = { - .module_offs = CORE_MOD, - .prcm_reg_id = 3, - .module_bit = OMAP3430ES2_EN_USBTLL_SHIFT, - .idlest_reg_id = 3, - .idlest_idle_bit = OMAP3430ES2_ST_USBTLL_SHIFT, - }, - }, - .slaves = omap3xxx_usb_tll_hs_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_usb_tll_hs_slaves), -}; - -static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { - &omap3xxx_l3_main_hwmod, - &omap3xxx_l4_core_hwmod, - &omap3xxx_l4_per_hwmod, - &omap3xxx_l4_wkup_hwmod, - &omap3xxx_mmc3_hwmod, - &omap3xxx_mpu_hwmod, - - &omap3xxx_timer1_hwmod, - &omap3xxx_timer2_hwmod, - &omap3xxx_timer3_hwmod, - &omap3xxx_timer4_hwmod, - &omap3xxx_timer5_hwmod, - &omap3xxx_timer6_hwmod, - &omap3xxx_timer7_hwmod, - &omap3xxx_timer8_hwmod, - &omap3xxx_timer9_hwmod, - &omap3xxx_timer10_hwmod, - &omap3xxx_timer11_hwmod, - - &omap3xxx_wd_timer2_hwmod, - &omap3xxx_uart1_hwmod, - &omap3xxx_uart2_hwmod, - &omap3xxx_uart3_hwmod, - - /* i2c class */ - &omap3xxx_i2c1_hwmod, - &omap3xxx_i2c2_hwmod, - &omap3xxx_i2c3_hwmod, - - /* gpio class */ - &omap3xxx_gpio1_hwmod, - &omap3xxx_gpio2_hwmod, - &omap3xxx_gpio3_hwmod, - &omap3xxx_gpio4_hwmod, - &omap3xxx_gpio5_hwmod, - &omap3xxx_gpio6_hwmod, - - /* dma_system class*/ - &omap3xxx_dma_system_hwmod, - - /* mcbsp class */ - &omap3xxx_mcbsp1_hwmod, - &omap3xxx_mcbsp2_hwmod, - &omap3xxx_mcbsp3_hwmod, - &omap3xxx_mcbsp4_hwmod, - &omap3xxx_mcbsp5_hwmod, - &omap3xxx_mcbsp2_sidetone_hwmod, - &omap3xxx_mcbsp3_sidetone_hwmod, - - - /* mcspi class */ - &omap34xx_mcspi1, - &omap34xx_mcspi2, - &omap34xx_mcspi3, - &omap34xx_mcspi4, - +static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_l3_main__l4_core, + &omap3xxx_l3_main__l4_per, + &omap3xxx_mpu__l3_main, + &omap3xxx_l4_core__l4_wkup, + &omap3xxx_l4_core__mmc3, + &omap3_l4_core__uart1, + &omap3_l4_core__uart2, + &omap3_l4_per__uart3, + &omap3_l4_core__i2c1, + &omap3_l4_core__i2c2, + &omap3_l4_core__i2c3, + &omap3xxx_l4_wkup__l4_sec, + &omap3xxx_l4_wkup__timer1, + &omap3xxx_l4_per__timer2, + &omap3xxx_l4_per__timer3, + &omap3xxx_l4_per__timer4, + &omap3xxx_l4_per__timer5, + &omap3xxx_l4_per__timer6, + &omap3xxx_l4_per__timer7, + &omap3xxx_l4_per__timer8, + &omap3xxx_l4_per__timer9, + &omap3xxx_l4_core__timer10, + &omap3xxx_l4_core__timer11, + &omap3xxx_l4_wkup__wd_timer2, + &omap3xxx_l4_wkup__gpio1, + &omap3xxx_l4_per__gpio2, + &omap3xxx_l4_per__gpio3, + &omap3xxx_l4_per__gpio4, + &omap3xxx_l4_per__gpio5, + &omap3xxx_l4_per__gpio6, + &omap3xxx_dma_system__l3, + &omap3xxx_l4_core__dma_system, + &omap3xxx_l4_core__mcbsp1, + &omap3xxx_l4_per__mcbsp2, + &omap3xxx_l4_per__mcbsp3, + &omap3xxx_l4_per__mcbsp4, + &omap3xxx_l4_core__mcbsp5, + &omap3xxx_l4_per__mcbsp2_sidetone, + &omap3xxx_l4_per__mcbsp3_sidetone, + &omap34xx_l4_core__mcspi1, + &omap34xx_l4_core__mcspi2, + &omap34xx_l4_core__mcspi3, + &omap34xx_l4_core__mcspi4, NULL, }; -/* GP-only hwmods */ -static __initdata struct omap_hwmod *omap3xxx_gp_hwmods[] = { - &omap3xxx_timer12_hwmod, +/* GP-only hwmod links */ +static struct omap_hwmod_ocp_if *omap3xxx_gp_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_l4_sec__timer12, NULL }; -/* 3430ES1-only hwmods */ -static __initdata struct omap_hwmod *omap3430es1_hwmods[] = { - &omap3430es1_dss_core_hwmod, +/* 3430ES1-only hwmod links */ +static struct omap_hwmod_ocp_if *omap3430es1_hwmod_ocp_ifs[] __initdata = { + &omap3430es1_dss__l3, + &omap3430es1_l4_core__dss, NULL }; -/* 3430ES2+-only hwmods */ -static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = { - &omap3xxx_dss_core_hwmod, - &omap3xxx_usbhsotg_hwmod, - &omap3xxx_usb_host_hs_hwmod, - &omap3xxx_usb_tll_hs_hwmod, +/* 3430ES2+-only hwmod links */ +static struct omap_hwmod_ocp_if *omap3430es2plus_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_dss__l3, + &omap3xxx_l4_core__dss, + &omap3xxx_usbhsotg__l3, + &omap3xxx_l4_core__usbhsotg, + &omap3xxx_usb_host_hs__l3_main_2, + &omap3xxx_l4_core__usb_host_hs, + &omap3xxx_l4_core__usb_tll_hs, NULL }; -/* <= 3430ES3-only hwmods */ -static struct omap_hwmod *omap3430_pre_es3_hwmods[] __initdata = { - &omap3xxx_pre_es3_mmc1_hwmod, - &omap3xxx_pre_es3_mmc2_hwmod, +/* <= 3430ES3-only hwmod links */ +static struct omap_hwmod_ocp_if *omap3430_pre_es3_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_l4_core__pre_es3_mmc1, + &omap3xxx_l4_core__pre_es3_mmc2, NULL }; -/* 3430ES3+-only hwmods */ -static struct omap_hwmod *omap3430_es3plus_hwmods[] __initdata = { - &omap3xxx_es3plus_mmc1_hwmod, - &omap3xxx_es3plus_mmc2_hwmod, +/* 3430ES3+-only hwmod links */ +static struct omap_hwmod_ocp_if *omap3430_es3plus_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_l4_core__es3plus_mmc1, + &omap3xxx_l4_core__es3plus_mmc2, NULL }; -/* 34xx-only hwmods (all ES revisions) */ -static __initdata struct omap_hwmod *omap34xx_hwmods[] = { - &omap3xxx_iva_hwmod, - &omap34xx_sr1_hwmod, - &omap34xx_sr2_hwmod, - &omap3xxx_mailbox_hwmod, +/* 34xx-only hwmod links (all ES revisions) */ +static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_l3__iva, + &omap34xx_l4_core__sr1, + &omap34xx_l4_core__sr2, + &omap3xxx_l4_core__mailbox, NULL }; -/* 36xx-only hwmods (all ES revisions) */ -static __initdata struct omap_hwmod *omap36xx_hwmods[] = { - &omap3xxx_iva_hwmod, - &omap3xxx_uart4_hwmod, - &omap3xxx_dss_core_hwmod, - &omap36xx_sr1_hwmod, - &omap36xx_sr2_hwmod, - &omap3xxx_usbhsotg_hwmod, - &omap3xxx_mailbox_hwmod, - &omap3xxx_usb_host_hs_hwmod, - &omap3xxx_usb_tll_hs_hwmod, - &omap3xxx_es3plus_mmc1_hwmod, - &omap3xxx_es3plus_mmc2_hwmod, +/* 36xx-only hwmod links (all ES revisions) */ +static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_l3__iva, + &omap36xx_l4_per__uart4, + &omap3xxx_dss__l3, + &omap3xxx_l4_core__dss, + &omap36xx_l4_core__sr1, + &omap36xx_l4_core__sr2, + &omap3xxx_usbhsotg__l3, + &omap3xxx_l4_core__usbhsotg, + &omap3xxx_l4_core__mailbox, + &omap3xxx_usb_host_hs__l3_main_2, + &omap3xxx_l4_core__usb_host_hs, + &omap3xxx_l4_core__usb_tll_hs, + &omap3xxx_l4_core__es3plus_mmc1, + &omap3xxx_l4_core__es3plus_mmc2, NULL }; -static __initdata struct omap_hwmod *am35xx_hwmods[] = { - &omap3xxx_dss_core_hwmod, /* XXX ??? */ - &am35xx_usbhsotg_hwmod, - &am35xx_uart4_hwmod, - &omap3xxx_usb_host_hs_hwmod, - &omap3xxx_usb_tll_hs_hwmod, - &omap3xxx_es3plus_mmc1_hwmod, - &omap3xxx_es3plus_mmc2_hwmod, +static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_dss__l3, + &omap3xxx_l4_core__dss, + &am35xx_usbhsotg__l3, + &am35xx_l4_core__usbhsotg, + &am35xx_l4_core__uart4, + &omap3xxx_usb_host_hs__l3_main_2, + &omap3xxx_l4_core__usb_host_hs, + &omap3xxx_l4_core__usb_tll_hs, + &omap3xxx_l4_core__es3plus_mmc1, + &omap3xxx_l4_core__es3plus_mmc2, NULL }; -static __initdata struct omap_hwmod *omap3xxx_dss_hwmods[] = { - /* dss class */ - &omap3xxx_dss_dispc_hwmod, - &omap3xxx_dss_dsi1_hwmod, - &omap3xxx_dss_rfbi_hwmod, - &omap3xxx_dss_venc_hwmod, +static struct omap_hwmod_ocp_if *omap3xxx_dss_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_l4_core__dss_dispc, + &omap3xxx_l4_core__dss_dsi1, + &omap3xxx_l4_core__dss_rfbi, + &omap3xxx_l4_core__dss_venc, NULL }; int __init omap3xxx_hwmod_init(void) { int r; - struct omap_hwmod **h = NULL; + struct omap_hwmod_ocp_if **h = NULL; unsigned int rev; - /* Register hwmods common to all OMAP3 */ - r = omap_hwmod_register(omap3xxx_hwmods); + /* Register hwmod links common to all OMAP3 */ + r = omap_hwmod_register_links(omap3xxx_hwmod_ocp_ifs); if (r < 0) return r; - /* Register GP-only hwmods. */ + /* Register GP-only hwmod links. */ if (omap_type() == OMAP2_DEVICE_TYPE_GP) { - r = omap_hwmod_register(omap3xxx_gp_hwmods); + r = omap_hwmod_register_links(omap3xxx_gp_hwmod_ocp_ifs); if (r < 0) return r; } @@ -3703,43 +3216,43 @@ int __init omap3xxx_hwmod_init(void) rev = omap_rev(); /* - * Register hwmods common to individual OMAP3 families, all + * Register hwmod links common to individual OMAP3 families, all * silicon revisions (e.g., 34xx, or AM3505/3517, or 36xx) * All possible revisions should be included in this conditional. */ if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 || rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) { - h = omap34xx_hwmods; + h = omap34xx_hwmod_ocp_ifs; } else if (rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1) { - h = am35xx_hwmods; + h = am35xx_hwmod_ocp_ifs; } else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2) { - h = omap36xx_hwmods; + h = omap36xx_hwmod_ocp_ifs; } else { WARN(1, "OMAP3 hwmod family init: unknown chip type\n"); return -EINVAL; }; - r = omap_hwmod_register(h); + r = omap_hwmod_register_links(h); if (r < 0) return r; /* - * Register hwmods specific to certain ES levels of a + * Register hwmod links specific to certain ES levels of a * particular family of silicon (e.g., 34xx ES1.0) */ h = NULL; if (rev == OMAP3430_REV_ES1_0) { - h = omap3430es1_hwmods; + h = omap3430es1_hwmod_ocp_ifs; } else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 || rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) { - h = omap3430es2plus_hwmods; + h = omap3430es2plus_hwmod_ocp_ifs; }; if (h) { - r = omap_hwmod_register(h); + r = omap_hwmod_register_links(h); if (r < 0) return r; } @@ -3747,29 +3260,29 @@ int __init omap3xxx_hwmod_init(void) h = NULL; if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1) { - h = omap3430_pre_es3_hwmods; + h = omap3430_pre_es3_hwmod_ocp_ifs; } else if (rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) { - h = omap3430_es3plus_hwmods; + h = omap3430_es3plus_hwmod_ocp_ifs; }; if (h) - r = omap_hwmod_register(h); + r = omap_hwmod_register_links(h); if (r < 0) return r; /* * DSS code presumes that dss_core hwmod is handled first, * _before_ any other DSS related hwmods so register common - * DSS hwmods last to ensure that dss_core is already registered. - * Otherwise some change things may happen, for ex. if dispc - * is handled before dss_core and DSS is enabled in bootloader - * DIPSC will be reset with outputs enabled which sometimes leads - * to unrecoverable L3 error. - * XXX The long-term fix to this is to ensure modules are set up - * in dependency order in the hwmod core code. + * DSS hwmod links last to ensure that dss_core is already + * registered. Otherwise some change things may happen, for + * ex. if dispc is handled before dss_core and DSS is enabled + * in bootloader DISPC will be reset with outputs enabled + * which sometimes leads to unrecoverable L3 error. XXX The + * long-term fix to this is to ensure hwmods are set up in + * dependency order in the hwmod core code. */ - r = omap_hwmod_register(omap3xxx_dss_hwmods); + r = omap_hwmod_register_links(omap3xxx_dss_hwmod_ocp_ifs); return r; } diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 6abc75753e42..0d91dec5b4bc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1,7 +1,7 @@ /* * Hardware modules present on the OMAP44xx chips * - * Copyright (C) 2009-2011 Texas Instruments, Inc. + * Copyright (C) 2009-2012 Texas Instruments, Inc. * Copyright (C) 2009-2010 Nokia Corporation * * Paul Walmsley @@ -44,38 +44,10 @@ #define OMAP44XX_IRQ_GIC_START 32 /* Base offset for all OMAP4 dma requests */ -#define OMAP44XX_DMA_REQ_START 1 - -/* Backward references (IPs with Bus Master capability) */ -static struct omap_hwmod omap44xx_aess_hwmod; -static struct omap_hwmod omap44xx_dma_system_hwmod; -static struct omap_hwmod omap44xx_dmm_hwmod; -static struct omap_hwmod omap44xx_dsp_hwmod; -static struct omap_hwmod omap44xx_dss_hwmod; -static struct omap_hwmod omap44xx_emif_fw_hwmod; -static struct omap_hwmod omap44xx_hsi_hwmod; -static struct omap_hwmod omap44xx_ipu_hwmod; -static struct omap_hwmod omap44xx_iss_hwmod; -static struct omap_hwmod omap44xx_iva_hwmod; -static struct omap_hwmod omap44xx_l3_instr_hwmod; -static struct omap_hwmod omap44xx_l3_main_1_hwmod; -static struct omap_hwmod omap44xx_l3_main_2_hwmod; -static struct omap_hwmod omap44xx_l3_main_3_hwmod; -static struct omap_hwmod omap44xx_l4_abe_hwmod; -static struct omap_hwmod omap44xx_l4_cfg_hwmod; -static struct omap_hwmod omap44xx_l4_per_hwmod; -static struct omap_hwmod omap44xx_l4_wkup_hwmod; -static struct omap_hwmod omap44xx_mmc1_hwmod; -static struct omap_hwmod omap44xx_mmc2_hwmod; -static struct omap_hwmod omap44xx_mpu_hwmod; -static struct omap_hwmod omap44xx_mpu_private_hwmod; -static struct omap_hwmod omap44xx_usb_otg_hs_hwmod; -static struct omap_hwmod omap44xx_usb_host_hs_hwmod; -static struct omap_hwmod omap44xx_usb_tll_hs_hwmod; +#define OMAP44XX_DMA_REQ_START 1 /* - * Interconnects omap_hwmod structures - * hwmods that compose the global OMAP interconnect + * IP blocks */ /* @@ -92,51 +64,17 @@ static struct omap_hwmod_irq_info omap44xx_dmm_irqs[] = { { .irq = -1 } }; -/* l3_main_1 -> dmm */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_1__dmm = { - .master = &omap44xx_l3_main_1_hwmod, - .slave = &omap44xx_dmm_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_SDMA, -}; - -static struct omap_hwmod_addr_space omap44xx_dmm_addrs[] = { - { - .pa_start = 0x4e000000, - .pa_end = 0x4e0007ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* mpu -> dmm */ -static struct omap_hwmod_ocp_if omap44xx_mpu__dmm = { - .master = &omap44xx_mpu_hwmod, - .slave = &omap44xx_dmm_hwmod, - .clk = "l3_div_ck", - .addr = omap44xx_dmm_addrs, - .user = OCP_USER_MPU, -}; - -/* dmm slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_dmm_slaves[] = { - &omap44xx_l3_main_1__dmm, - &omap44xx_mpu__dmm, -}; - static struct omap_hwmod omap44xx_dmm_hwmod = { .name = "dmm", .class = &omap44xx_dmm_hwmod_class, .clkdm_name = "l3_emif_clkdm", + .mpu_irqs = omap44xx_dmm_irqs, .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_MEMIF_DMM_CLKCTRL_OFFSET, .context_offs = OMAP4_RM_MEMIF_DMM_CONTEXT_OFFSET, }, }, - .slaves = omap44xx_dmm_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_dmm_slaves), - .mpu_irqs = omap44xx_dmm_irqs, }; /* @@ -148,38 +86,6 @@ static struct omap_hwmod_class omap44xx_emif_fw_hwmod_class = { }; /* emif_fw */ -/* dmm -> emif_fw */ -static struct omap_hwmod_ocp_if omap44xx_dmm__emif_fw = { - .master = &omap44xx_dmm_hwmod, - .slave = &omap44xx_emif_fw_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_addr_space omap44xx_emif_fw_addrs[] = { - { - .pa_start = 0x4a20c000, - .pa_end = 0x4a20c0ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_cfg -> emif_fw */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__emif_fw = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_emif_fw_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_emif_fw_addrs, - .user = OCP_USER_MPU, -}; - -/* emif_fw slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_emif_fw_slaves[] = { - &omap44xx_dmm__emif_fw, - &omap44xx_l4_cfg__emif_fw, -}; - static struct omap_hwmod omap44xx_emif_fw_hwmod = { .name = "emif_fw", .class = &omap44xx_emif_fw_hwmod_class, @@ -190,8 +96,6 @@ static struct omap_hwmod omap44xx_emif_fw_hwmod = { .context_offs = OMAP4_RM_MEMIF_EMIF_FW_CONTEXT_OFFSET, }, }, - .slaves = omap44xx_emif_fw_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_emif_fw_slaves), }; /* @@ -203,28 +107,6 @@ static struct omap_hwmod_class omap44xx_l3_hwmod_class = { }; /* l3_instr */ -/* iva -> l3_instr */ -static struct omap_hwmod_ocp_if omap44xx_iva__l3_instr = { - .master = &omap44xx_iva_hwmod, - .slave = &omap44xx_l3_instr_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_3 -> l3_instr */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_3__l3_instr = { - .master = &omap44xx_l3_main_3_hwmod, - .slave = &omap44xx_l3_instr_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_instr slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_l3_instr_slaves[] = { - &omap44xx_iva__l3_instr, - &omap44xx_l3_main_3__l3_instr, -}; - static struct omap_hwmod omap44xx_l3_instr_hwmod = { .name = "l3_instr", .class = &omap44xx_l3_hwmod_class, @@ -236,8 +118,6 @@ static struct omap_hwmod omap44xx_l3_instr_hwmod = { .modulemode = MODULEMODE_HWCTRL, }, }, - .slaves = omap44xx_l3_instr_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_l3_instr_slaves), }; /* l3_main_1 */ @@ -247,83 +127,6 @@ static struct omap_hwmod_irq_info omap44xx_l3_main_1_irqs[] = { { .irq = -1 } }; -/* dsp -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_dsp__l3_main_1 = { - .master = &omap44xx_dsp_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dss -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_dss__l3_main_1 = { - .master = &omap44xx_dss_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_1 = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mmc1 -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_mmc1__l3_main_1 = { - .master = &omap44xx_mmc1_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mmc2 -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_mmc2__l3_main_1 = { - .master = &omap44xx_mmc2_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_addr_space omap44xx_l3_main_1_addrs[] = { - { - .pa_start = 0x44000000, - .pa_end = 0x44000fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* mpu -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = { - .master = &omap44xx_mpu_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l3_div_ck", - .addr = omap44xx_l3_main_1_addrs, - .user = OCP_USER_MPU, -}; - -/* l3_main_1 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_l3_main_1_slaves[] = { - &omap44xx_dsp__l3_main_1, - &omap44xx_dss__l3_main_1, - &omap44xx_l3_main_2__l3_main_1, - &omap44xx_l4_cfg__l3_main_1, - &omap44xx_mmc1__l3_main_1, - &omap44xx_mmc2__l3_main_1, - &omap44xx_mpu__l3_main_1, -}; - static struct omap_hwmod omap44xx_l3_main_1_hwmod = { .name = "l3_main_1", .class = &omap44xx_l3_hwmod_class, @@ -335,97 +138,9 @@ static struct omap_hwmod omap44xx_l3_main_1_hwmod = { .context_offs = OMAP4_RM_L3_1_L3_1_CONTEXT_OFFSET, }, }, - .slaves = omap44xx_l3_main_1_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_1_slaves), }; /* l3_main_2 */ -/* dma_system -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_dma_system__l3_main_2 = { - .master = &omap44xx_dma_system_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* hsi -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_hsi__l3_main_2 = { - .master = &omap44xx_hsi_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* ipu -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_ipu__l3_main_2 = { - .master = &omap44xx_ipu_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* iss -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_iss__l3_main_2 = { - .master = &omap44xx_iss_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* iva -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_iva__l3_main_2 = { - .master = &omap44xx_iva_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_addr_space omap44xx_l3_main_2_addrs[] = { - { - .pa_start = 0x44800000, - .pa_end = 0x44801fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l3_main_1 -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = { - .master = &omap44xx_l3_main_1_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l3_div_ck", - .addr = omap44xx_l3_main_2_addrs, - .user = OCP_USER_MPU, -}; - -/* l4_cfg -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* usb_otg_hs -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_usb_otg_hs__l3_main_2 = { - .master = &omap44xx_usb_otg_hs_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_l3_main_2_slaves[] = { - &omap44xx_dma_system__l3_main_2, - &omap44xx_hsi__l3_main_2, - &omap44xx_ipu__l3_main_2, - &omap44xx_iss__l3_main_2, - &omap44xx_iva__l3_main_2, - &omap44xx_l3_main_1__l3_main_2, - &omap44xx_l4_cfg__l3_main_2, - &omap44xx_usb_otg_hs__l3_main_2, -}; - static struct omap_hwmod omap44xx_l3_main_2_hwmod = { .name = "l3_main_2", .class = &omap44xx_l3_hwmod_class, @@ -436,52 +151,9 @@ static struct omap_hwmod omap44xx_l3_main_2_hwmod = { .context_offs = OMAP4_RM_L3_2_L3_2_CONTEXT_OFFSET, }, }, - .slaves = omap44xx_l3_main_2_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_2_slaves), }; /* l3_main_3 */ -static struct omap_hwmod_addr_space omap44xx_l3_main_3_addrs[] = { - { - .pa_start = 0x45000000, - .pa_end = 0x45000fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l3_main_1 -> l3_main_3 */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = { - .master = &omap44xx_l3_main_1_hwmod, - .slave = &omap44xx_l3_main_3_hwmod, - .clk = "l3_div_ck", - .addr = omap44xx_l3_main_3_addrs, - .user = OCP_USER_MPU, -}; - -/* l3_main_2 -> l3_main_3 */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_3 = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_l3_main_3_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> l3_main_3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_l3_main_3_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_3 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_l3_main_3_slaves[] = { - &omap44xx_l3_main_1__l3_main_3, - &omap44xx_l3_main_2__l3_main_3, - &omap44xx_l4_cfg__l3_main_3, -}; - static struct omap_hwmod omap44xx_l3_main_3_hwmod = { .name = "l3_main_3", .class = &omap44xx_l3_hwmod_class, @@ -493,8 +165,6 @@ static struct omap_hwmod omap44xx_l3_main_3_hwmod = { .modulemode = MODULEMODE_HWCTRL, }, }, - .slaves = omap44xx_l3_main_3_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_3_slaves), }; /* @@ -506,46 +176,6 @@ static struct omap_hwmod_class omap44xx_l4_hwmod_class = { }; /* l4_abe */ -/* aess -> l4_abe */ -static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = { - .master = &omap44xx_aess_hwmod, - .slave = &omap44xx_l4_abe_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dsp -> l4_abe */ -static struct omap_hwmod_ocp_if omap44xx_dsp__l4_abe = { - .master = &omap44xx_dsp_hwmod, - .slave = &omap44xx_l4_abe_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l4_abe */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_abe = { - .master = &omap44xx_l3_main_1_hwmod, - .slave = &omap44xx_l4_abe_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> l4_abe */ -static struct omap_hwmod_ocp_if omap44xx_mpu__l4_abe = { - .master = &omap44xx_mpu_hwmod, - .slave = &omap44xx_l4_abe_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_abe slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_l4_abe_slaves[] = { - &omap44xx_aess__l4_abe, - &omap44xx_dsp__l4_abe, - &omap44xx_l3_main_1__l4_abe, - &omap44xx_mpu__l4_abe, -}; - static struct omap_hwmod omap44xx_l4_abe_hwmod = { .name = "l4_abe", .class = &omap44xx_l4_hwmod_class, @@ -555,24 +185,9 @@ static struct omap_hwmod omap44xx_l4_abe_hwmod = { .clkctrl_offs = OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET, }, }, - .slaves = omap44xx_l4_abe_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_l4_abe_slaves), }; /* l4_cfg */ -/* l3_main_1 -> l4_cfg */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = { - .master = &omap44xx_l3_main_1_hwmod, - .slave = &omap44xx_l4_cfg_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_l4_cfg_slaves[] = { - &omap44xx_l3_main_1__l4_cfg, -}; - static struct omap_hwmod omap44xx_l4_cfg_hwmod = { .name = "l4_cfg", .class = &omap44xx_l4_hwmod_class, @@ -583,24 +198,9 @@ static struct omap_hwmod omap44xx_l4_cfg_hwmod = { .context_offs = OMAP4_RM_L4CFG_L4_CFG_CONTEXT_OFFSET, }, }, - .slaves = omap44xx_l4_cfg_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_l4_cfg_slaves), }; /* l4_per */ -/* l3_main_2 -> l4_per */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l4_per = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_l4_per_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_l4_per_slaves[] = { - &omap44xx_l3_main_2__l4_per, -}; - static struct omap_hwmod omap44xx_l4_per_hwmod = { .name = "l4_per", .class = &omap44xx_l4_hwmod_class, @@ -611,24 +211,9 @@ static struct omap_hwmod omap44xx_l4_per_hwmod = { .context_offs = OMAP4_RM_L4PER_L4_PER_CONTEXT_OFFSET, }, }, - .slaves = omap44xx_l4_per_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_l4_per_slaves), }; /* l4_wkup */ -/* l4_cfg -> l4_wkup */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l4_wkup = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_l4_wkup_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_wkup slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_l4_wkup_slaves[] = { - &omap44xx_l4_cfg__l4_wkup, -}; - static struct omap_hwmod omap44xx_l4_wkup_hwmod = { .name = "l4_wkup", .class = &omap44xx_l4_hwmod_class, @@ -639,8 +224,6 @@ static struct omap_hwmod omap44xx_l4_wkup_hwmod = { .context_offs = OMAP4_RM_WKUP_L4WKUP_CONTEXT_OFFSET, }, }, - .slaves = omap44xx_l4_wkup_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_l4_wkup_slaves), }; /* @@ -652,25 +235,10 @@ static struct omap_hwmod_class omap44xx_mpu_bus_hwmod_class = { }; /* mpu_private */ -/* mpu -> mpu_private */ -static struct omap_hwmod_ocp_if omap44xx_mpu__mpu_private = { - .master = &omap44xx_mpu_hwmod, - .slave = &omap44xx_mpu_private_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu_private slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_mpu_private_slaves[] = { - &omap44xx_mpu__mpu_private, -}; - static struct omap_hwmod omap44xx_mpu_private_hwmod = { .name = "mpu_private", .class = &omap44xx_mpu_bus_hwmod_class, .clkdm_name = "mpuss_clkdm", - .slaves = omap44xx_mpu_private_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_mpu_private_slaves), }; /* @@ -756,53 +324,6 @@ static struct omap_hwmod_dma_info omap44xx_aess_sdma_reqs[] = { { .dma_req = -1 } }; -/* aess master ports */ -static struct omap_hwmod_ocp_if *omap44xx_aess_masters[] = { - &omap44xx_aess__l4_abe, -}; - -static struct omap_hwmod_addr_space omap44xx_aess_addrs[] = { - { - .pa_start = 0x401f1000, - .pa_end = 0x401f13ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> aess */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_aess_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_aess_addrs, - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_addr_space omap44xx_aess_dma_addrs[] = { - { - .pa_start = 0x490f1000, - .pa_end = 0x490f13ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> aess (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_aess_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_aess_dma_addrs, - .user = OCP_USER_SDMA, -}; - -/* aess slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_aess_slaves[] = { - &omap44xx_l4_abe__aess, - &omap44xx_l4_abe__aess_dma, -}; - static struct omap_hwmod omap44xx_aess_hwmod = { .name = "aess", .class = &omap44xx_aess_hwmod_class, @@ -817,37 +338,6 @@ static struct omap_hwmod omap44xx_aess_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_aess_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_aess_slaves), - .masters = omap44xx_aess_masters, - .masters_cnt = ARRAY_SIZE(omap44xx_aess_masters), -}; - -/* - * 'bandgap' class - * bangap reference for ldo regulators - */ - -static struct omap_hwmod_class omap44xx_bandgap_hwmod_class = { - .name = "bandgap", -}; - -/* bandgap */ -static struct omap_hwmod_opt_clk bandgap_opt_clks[] = { - { .role = "fclk", .clk = "bandgap_fclk" }, -}; - -static struct omap_hwmod omap44xx_bandgap_hwmod = { - .name = "bandgap", - .class = &omap44xx_bandgap_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_WKUP_BANDGAP_CLKCTRL_OFFSET, - }, - }, - .opt_clks = bandgap_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(bandgap_opt_clks), }; /* @@ -870,30 +360,6 @@ static struct omap_hwmod_class omap44xx_counter_hwmod_class = { }; /* counter_32k */ -static struct omap_hwmod omap44xx_counter_32k_hwmod; -static struct omap_hwmod_addr_space omap44xx_counter_32k_addrs[] = { - { - .pa_start = 0x4a304000, - .pa_end = 0x4a30401f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_wkup -> counter_32k */ -static struct omap_hwmod_ocp_if omap44xx_l4_wkup__counter_32k = { - .master = &omap44xx_l4_wkup_hwmod, - .slave = &omap44xx_counter_32k_hwmod, - .clk = "l4_wkup_clk_mux_ck", - .addr = omap44xx_counter_32k_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* counter_32k slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_counter_32k_slaves[] = { - &omap44xx_l4_wkup__counter_32k, -}; - static struct omap_hwmod omap44xx_counter_32k_hwmod = { .name = "counter_32k", .class = &omap44xx_counter_hwmod_class, @@ -906,8 +372,6 @@ static struct omap_hwmod omap44xx_counter_32k_hwmod = { .context_offs = OMAP4_RM_WKUP_SYNCTIMER_CONTEXT_OFFSET, }, }, - .slaves = omap44xx_counter_32k_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_counter_32k_slaves), }; /* @@ -950,34 +414,6 @@ static struct omap_hwmod_irq_info omap44xx_dma_system_irqs[] = { { .irq = -1 } }; -/* dma_system master ports */ -static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = { - &omap44xx_dma_system__l3_main_2, -}; - -static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = { - { - .pa_start = 0x4a056000, - .pa_end = 0x4a056fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_cfg -> dma_system */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dma_system = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_dma_system_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_dma_system_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dma_system slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_dma_system_slaves[] = { - &omap44xx_l4_cfg__dma_system, -}; - static struct omap_hwmod omap44xx_dma_system_hwmod = { .name = "dma_system", .class = &omap44xx_dma_hwmod_class, @@ -991,10 +427,6 @@ static struct omap_hwmod omap44xx_dma_system_hwmod = { }, }, .dev_attr = &dma_dev_attr, - .slaves = omap44xx_dma_system_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_dma_system_slaves), - .masters = omap44xx_dma_system_masters, - .masters_cnt = ARRAY_SIZE(omap44xx_dma_system_masters), }; /* @@ -1018,7 +450,6 @@ static struct omap_hwmod_class omap44xx_dmic_hwmod_class = { }; /* dmic */ -static struct omap_hwmod omap44xx_dmic_hwmod; static struct omap_hwmod_irq_info omap44xx_dmic_irqs[] = { { .irq = 114 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -1029,50 +460,6 @@ static struct omap_hwmod_dma_info omap44xx_dmic_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = { - { - .name = "mpu", - .pa_start = 0x4012e000, - .pa_end = 0x4012e07f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> dmic */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_dmic_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_dmic_addrs, - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = { - { - .name = "dma", - .pa_start = 0x4902e000, - .pa_end = 0x4902e07f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> dmic (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_dmic_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_dmic_dma_addrs, - .user = OCP_USER_SDMA, -}; - -/* dmic slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_dmic_slaves[] = { - &omap44xx_l4_abe__dmic, - &omap44xx_l4_abe__dmic_dma, -}; - static struct omap_hwmod omap44xx_dmic_hwmod = { .name = "dmic", .class = &omap44xx_dmic_hwmod_class, @@ -1087,8 +474,6 @@ static struct omap_hwmod omap44xx_dmic_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_dmic_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_dmic_slaves), }; /* @@ -1107,53 +492,8 @@ static struct omap_hwmod_irq_info omap44xx_dsp_irqs[] = { }; static struct omap_hwmod_rst_info omap44xx_dsp_resets[] = { - { .name = "mmu_cache", .rst_shift = 1 }, -}; - -static struct omap_hwmod_rst_info omap44xx_dsp_c0_resets[] = { { .name = "dsp", .rst_shift = 0 }, -}; - -/* dsp -> iva */ -static struct omap_hwmod_ocp_if omap44xx_dsp__iva = { - .master = &omap44xx_dsp_hwmod, - .slave = &omap44xx_iva_hwmod, - .clk = "dpll_iva_m5x2_ck", -}; - -/* dsp master ports */ -static struct omap_hwmod_ocp_if *omap44xx_dsp_masters[] = { - &omap44xx_dsp__l3_main_1, - &omap44xx_dsp__l4_abe, - &omap44xx_dsp__iva, -}; - -/* l4_cfg -> dsp */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dsp = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_dsp_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dsp slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_dsp_slaves[] = { - &omap44xx_l4_cfg__dsp, -}; - -/* Pseudo hwmod for reset control purpose only */ -static struct omap_hwmod omap44xx_dsp_c0_hwmod = { - .name = "dsp_c0", - .class = &omap44xx_dsp_hwmod_class, - .clkdm_name = "tesla_clkdm", - .flags = HWMOD_INIT_NO_RESET, - .rst_lines = omap44xx_dsp_c0_resets, - .rst_lines_cnt = ARRAY_SIZE(omap44xx_dsp_c0_resets), - .prcm = { - .omap4 = { - .rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET, - }, - }, + { .name = "mmu_cache", .rst_shift = 1 }, }; static struct omap_hwmod omap44xx_dsp_hwmod = { @@ -1172,10 +512,6 @@ static struct omap_hwmod omap44xx_dsp_hwmod = { .modulemode = MODULEMODE_HWCTRL, }, }, - .slaves = omap44xx_dsp_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_dsp_slaves), - .masters = omap44xx_dsp_masters, - .masters_cnt = ARRAY_SIZE(omap44xx_dsp_masters), }; /* @@ -1196,53 +532,6 @@ static struct omap_hwmod_class omap44xx_dss_hwmod_class = { }; /* dss */ -/* dss master ports */ -static struct omap_hwmod_ocp_if *omap44xx_dss_masters[] = { - &omap44xx_dss__l3_main_1, -}; - -static struct omap_hwmod_addr_space omap44xx_dss_dma_addrs[] = { - { - .pa_start = 0x58000000, - .pa_end = 0x5800007f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l3_main_2 -> dss */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_hwmod, - .clk = "dss_fck", - .addr = omap44xx_dss_dma_addrs, - .user = OCP_USER_SDMA, -}; - -static struct omap_hwmod_addr_space omap44xx_dss_addrs[] = { - { - .pa_start = 0x48040000, - .pa_end = 0x4804007f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> dss */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_dss_addrs, - .user = OCP_USER_MPU, -}; - -/* dss slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_dss_slaves[] = { - &omap44xx_l3_main_2__dss, - &omap44xx_l4_per__dss, -}; - static struct omap_hwmod_opt_clk dss_opt_clks[] = { { .role = "sys_clk", .clk = "dss_sys_clk" }, { .role = "tv_clk", .clk = "dss_tv_clk" }, @@ -1263,10 +552,6 @@ static struct omap_hwmod omap44xx_dss_hwmod = { }, .opt_clks = dss_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), - .slaves = omap44xx_dss_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_dss_slaves), - .masters = omap44xx_dss_masters, - .masters_cnt = ARRAY_SIZE(omap44xx_dss_masters), }; /* @@ -1293,7 +578,6 @@ static struct omap_hwmod_class omap44xx_dispc_hwmod_class = { }; /* dss_dispc */ -static struct omap_hwmod omap44xx_dss_dispc_hwmod; static struct omap_hwmod_irq_info omap44xx_dss_dispc_irqs[] = { { .irq = 25 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -1304,53 +588,11 @@ static struct omap_hwmod_dma_info omap44xx_dss_dispc_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_dss_dispc_dma_addrs[] = { - { - .pa_start = 0x58001000, - .pa_end = 0x58001fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l3_main_2 -> dss_dispc */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_dispc_hwmod, - .clk = "dss_fck", - .addr = omap44xx_dss_dispc_dma_addrs, - .user = OCP_USER_SDMA, -}; - -static struct omap_hwmod_addr_space omap44xx_dss_dispc_addrs[] = { - { - .pa_start = 0x48041000, - .pa_end = 0x48041fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - static struct omap_dss_dispc_dev_attr omap44xx_dss_dispc_dev_attr = { .manager_count = 3, .has_framedonetv_irq = 1 }; -/* l4_per -> dss_dispc */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_dispc_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_dss_dispc_addrs, - .user = OCP_USER_MPU, -}; - -/* dss_dispc slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_dss_dispc_slaves[] = { - &omap44xx_l3_main_2__dss_dispc, - &omap44xx_l4_per__dss_dispc, -}; - static struct omap_hwmod omap44xx_dss_dispc_hwmod = { .name = "dss_dispc", .class = &omap44xx_dispc_hwmod_class, @@ -1364,8 +606,6 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = { .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, }, }, - .slaves = omap44xx_dss_dispc_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves), .dev_attr = &omap44xx_dss_dispc_dev_attr }; @@ -1391,7 +631,6 @@ static struct omap_hwmod_class omap44xx_dsi_hwmod_class = { }; /* dss_dsi1 */ -static struct omap_hwmod omap44xx_dss_dsi1_hwmod; static struct omap_hwmod_irq_info omap44xx_dss_dsi1_irqs[] = { { .irq = 53 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -1402,48 +641,6 @@ static struct omap_hwmod_dma_info omap44xx_dss_dsi1_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_dss_dsi1_dma_addrs[] = { - { - .pa_start = 0x58004000, - .pa_end = 0x580041ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l3_main_2 -> dss_dsi1 */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_dsi1_hwmod, - .clk = "dss_fck", - .addr = omap44xx_dss_dsi1_dma_addrs, - .user = OCP_USER_SDMA, -}; - -static struct omap_hwmod_addr_space omap44xx_dss_dsi1_addrs[] = { - { - .pa_start = 0x48044000, - .pa_end = 0x480441ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> dss_dsi1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi1 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_dsi1_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_dss_dsi1_addrs, - .user = OCP_USER_MPU, -}; - -/* dss_dsi1 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_dss_dsi1_slaves[] = { - &omap44xx_l3_main_2__dss_dsi1, - &omap44xx_l4_per__dss_dsi1, -}; - static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = { { .role = "sys_clk", .clk = "dss_sys_clk" }, }; @@ -1463,12 +660,9 @@ static struct omap_hwmod omap44xx_dss_dsi1_hwmod = { }, .opt_clks = dss_dsi1_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks), - .slaves = omap44xx_dss_dsi1_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_slaves), }; /* dss_dsi2 */ -static struct omap_hwmod omap44xx_dss_dsi2_hwmod; static struct omap_hwmod_irq_info omap44xx_dss_dsi2_irqs[] = { { .irq = 84 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -1479,48 +673,6 @@ static struct omap_hwmod_dma_info omap44xx_dss_dsi2_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_dss_dsi2_dma_addrs[] = { - { - .pa_start = 0x58005000, - .pa_end = 0x580051ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l3_main_2 -> dss_dsi2 */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_dsi2_hwmod, - .clk = "dss_fck", - .addr = omap44xx_dss_dsi2_dma_addrs, - .user = OCP_USER_SDMA, -}; - -static struct omap_hwmod_addr_space omap44xx_dss_dsi2_addrs[] = { - { - .pa_start = 0x48045000, - .pa_end = 0x480451ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> dss_dsi2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi2 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_dsi2_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_dss_dsi2_addrs, - .user = OCP_USER_MPU, -}; - -/* dss_dsi2 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_dss_dsi2_slaves[] = { - &omap44xx_l3_main_2__dss_dsi2, - &omap44xx_l4_per__dss_dsi2, -}; - static struct omap_hwmod_opt_clk dss_dsi2_opt_clks[] = { { .role = "sys_clk", .clk = "dss_sys_clk" }, }; @@ -1540,8 +692,6 @@ static struct omap_hwmod omap44xx_dss_dsi2_hwmod = { }, .opt_clks = dss_dsi2_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_dsi2_opt_clks), - .slaves = omap44xx_dss_dsi2_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_slaves), }; /* @@ -1565,7 +715,6 @@ static struct omap_hwmod_class omap44xx_hdmi_hwmod_class = { }; /* dss_hdmi */ -static struct omap_hwmod omap44xx_dss_hdmi_hwmod; static struct omap_hwmod_irq_info omap44xx_dss_hdmi_irqs[] = { { .irq = 101 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -1576,48 +725,6 @@ static struct omap_hwmod_dma_info omap44xx_dss_hdmi_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_dss_hdmi_dma_addrs[] = { - { - .pa_start = 0x58006000, - .pa_end = 0x58006fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l3_main_2 -> dss_hdmi */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_hdmi_hwmod, - .clk = "dss_fck", - .addr = omap44xx_dss_hdmi_dma_addrs, - .user = OCP_USER_SDMA, -}; - -static struct omap_hwmod_addr_space omap44xx_dss_hdmi_addrs[] = { - { - .pa_start = 0x48046000, - .pa_end = 0x48046fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> dss_hdmi */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_hdmi = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_hdmi_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_dss_hdmi_addrs, - .user = OCP_USER_MPU, -}; - -/* dss_hdmi slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_dss_hdmi_slaves[] = { - &omap44xx_l3_main_2__dss_hdmi, - &omap44xx_l4_per__dss_hdmi, -}; - static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = { { .role = "sys_clk", .clk = "dss_sys_clk" }, }; @@ -1637,8 +744,6 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { }, .opt_clks = dss_hdmi_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks), - .slaves = omap44xx_dss_hdmi_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_slaves), }; /* @@ -1662,54 +767,11 @@ static struct omap_hwmod_class omap44xx_rfbi_hwmod_class = { }; /* dss_rfbi */ -static struct omap_hwmod omap44xx_dss_rfbi_hwmod; static struct omap_hwmod_dma_info omap44xx_dss_rfbi_sdma_reqs[] = { { .dma_req = 13 + OMAP44XX_DMA_REQ_START }, { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_dss_rfbi_dma_addrs[] = { - { - .pa_start = 0x58002000, - .pa_end = 0x580020ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l3_main_2 -> dss_rfbi */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_rfbi_hwmod, - .clk = "dss_fck", - .addr = omap44xx_dss_rfbi_dma_addrs, - .user = OCP_USER_SDMA, -}; - -static struct omap_hwmod_addr_space omap44xx_dss_rfbi_addrs[] = { - { - .pa_start = 0x48042000, - .pa_end = 0x480420ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> dss_rfbi */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_rfbi = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_rfbi_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_dss_rfbi_addrs, - .user = OCP_USER_MPU, -}; - -/* dss_rfbi slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_dss_rfbi_slaves[] = { - &omap44xx_l3_main_2__dss_rfbi, - &omap44xx_l4_per__dss_rfbi, -}; - static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { { .role = "ick", .clk = "dss_fck" }, }; @@ -1728,8 +790,6 @@ static struct omap_hwmod omap44xx_dss_rfbi_hwmod = { }, .opt_clks = dss_rfbi_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), - .slaves = omap44xx_dss_rfbi_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_slaves), }; /* @@ -1742,49 +802,6 @@ static struct omap_hwmod_class omap44xx_venc_hwmod_class = { }; /* dss_venc */ -static struct omap_hwmod omap44xx_dss_venc_hwmod; -static struct omap_hwmod_addr_space omap44xx_dss_venc_dma_addrs[] = { - { - .pa_start = 0x58003000, - .pa_end = 0x580030ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l3_main_2 -> dss_venc */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_venc_hwmod, - .clk = "dss_fck", - .addr = omap44xx_dss_venc_dma_addrs, - .user = OCP_USER_SDMA, -}; - -static struct omap_hwmod_addr_space omap44xx_dss_venc_addrs[] = { - { - .pa_start = 0x48043000, - .pa_end = 0x480430ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> dss_venc */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_venc_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_dss_venc_addrs, - .user = OCP_USER_MPU, -}; - -/* dss_venc slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_dss_venc_slaves[] = { - &omap44xx_l3_main_2__dss_venc, - &omap44xx_l4_per__dss_venc, -}; - static struct omap_hwmod omap44xx_dss_venc_hwmod = { .name = "dss_venc", .class = &omap44xx_venc_hwmod_class, @@ -1796,8 +813,6 @@ static struct omap_hwmod omap44xx_dss_venc_hwmod = { .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, }, }, - .slaves = omap44xx_dss_venc_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_dss_venc_slaves), }; /* @@ -1830,35 +845,11 @@ static struct omap_gpio_dev_attr gpio_dev_attr = { }; /* gpio1 */ -static struct omap_hwmod omap44xx_gpio1_hwmod; static struct omap_hwmod_irq_info omap44xx_gpio1_irqs[] = { { .irq = 29 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_gpio1_addrs[] = { - { - .pa_start = 0x4a310000, - .pa_end = 0x4a3101ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_wkup -> gpio1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_wkup__gpio1 = { - .master = &omap44xx_l4_wkup_hwmod, - .slave = &omap44xx_gpio1_hwmod, - .clk = "l4_wkup_clk_mux_ck", - .addr = omap44xx_gpio1_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* gpio1 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_gpio1_slaves[] = { - &omap44xx_l4_wkup__gpio1, -}; - static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { { .role = "dbclk", .clk = "gpio1_dbclk" }, }; @@ -1879,40 +870,14 @@ static struct omap_hwmod omap44xx_gpio1_hwmod = { .opt_clks = gpio1_opt_clks, .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks), .dev_attr = &gpio_dev_attr, - .slaves = omap44xx_gpio1_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_gpio1_slaves), }; /* gpio2 */ -static struct omap_hwmod omap44xx_gpio2_hwmod; static struct omap_hwmod_irq_info omap44xx_gpio2_irqs[] = { { .irq = 30 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_gpio2_addrs[] = { - { - .pa_start = 0x48055000, - .pa_end = 0x480551ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> gpio2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio2 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_gpio2_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_gpio2_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* gpio2 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_gpio2_slaves[] = { - &omap44xx_l4_per__gpio2, -}; - static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { { .role = "dbclk", .clk = "gpio2_dbclk" }, }; @@ -1934,40 +899,14 @@ static struct omap_hwmod omap44xx_gpio2_hwmod = { .opt_clks = gpio2_opt_clks, .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks), .dev_attr = &gpio_dev_attr, - .slaves = omap44xx_gpio2_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_gpio2_slaves), }; /* gpio3 */ -static struct omap_hwmod omap44xx_gpio3_hwmod; static struct omap_hwmod_irq_info omap44xx_gpio3_irqs[] = { { .irq = 31 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_gpio3_addrs[] = { - { - .pa_start = 0x48057000, - .pa_end = 0x480571ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> gpio3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio3 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_gpio3_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_gpio3_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* gpio3 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_gpio3_slaves[] = { - &omap44xx_l4_per__gpio3, -}; - static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { { .role = "dbclk", .clk = "gpio3_dbclk" }, }; @@ -1989,40 +928,14 @@ static struct omap_hwmod omap44xx_gpio3_hwmod = { .opt_clks = gpio3_opt_clks, .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks), .dev_attr = &gpio_dev_attr, - .slaves = omap44xx_gpio3_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_gpio3_slaves), }; /* gpio4 */ -static struct omap_hwmod omap44xx_gpio4_hwmod; static struct omap_hwmod_irq_info omap44xx_gpio4_irqs[] = { { .irq = 32 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_gpio4_addrs[] = { - { - .pa_start = 0x48059000, - .pa_end = 0x480591ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> gpio4 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio4 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_gpio4_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_gpio4_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* gpio4 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_gpio4_slaves[] = { - &omap44xx_l4_per__gpio4, -}; - static struct omap_hwmod_opt_clk gpio4_opt_clks[] = { { .role = "dbclk", .clk = "gpio4_dbclk" }, }; @@ -2044,40 +957,14 @@ static struct omap_hwmod omap44xx_gpio4_hwmod = { .opt_clks = gpio4_opt_clks, .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks), .dev_attr = &gpio_dev_attr, - .slaves = omap44xx_gpio4_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_gpio4_slaves), }; /* gpio5 */ -static struct omap_hwmod omap44xx_gpio5_hwmod; static struct omap_hwmod_irq_info omap44xx_gpio5_irqs[] = { { .irq = 33 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_gpio5_addrs[] = { - { - .pa_start = 0x4805b000, - .pa_end = 0x4805b1ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> gpio5 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio5 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_gpio5_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_gpio5_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* gpio5 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_gpio5_slaves[] = { - &omap44xx_l4_per__gpio5, -}; - static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { { .role = "dbclk", .clk = "gpio5_dbclk" }, }; @@ -2099,40 +986,14 @@ static struct omap_hwmod omap44xx_gpio5_hwmod = { .opt_clks = gpio5_opt_clks, .opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks), .dev_attr = &gpio_dev_attr, - .slaves = omap44xx_gpio5_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_gpio5_slaves), }; /* gpio6 */ -static struct omap_hwmod omap44xx_gpio6_hwmod; static struct omap_hwmod_irq_info omap44xx_gpio6_irqs[] = { { .irq = 34 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_gpio6_addrs[] = { - { - .pa_start = 0x4805d000, - .pa_end = 0x4805d1ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> gpio6 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio6 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_gpio6_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_gpio6_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* gpio6 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_gpio6_slaves[] = { - &omap44xx_l4_per__gpio6, -}; - static struct omap_hwmod_opt_clk gpio6_opt_clks[] = { { .role = "dbclk", .clk = "gpio6_dbclk" }, }; @@ -2154,8 +1015,6 @@ static struct omap_hwmod omap44xx_gpio6_hwmod = { .opt_clks = gpio6_opt_clks, .opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks), .dev_attr = &gpio_dev_attr, - .slaves = omap44xx_gpio6_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_gpio6_slaves), }; /* @@ -2190,34 +1049,6 @@ static struct omap_hwmod_irq_info omap44xx_hsi_irqs[] = { { .irq = -1 } }; -/* hsi master ports */ -static struct omap_hwmod_ocp_if *omap44xx_hsi_masters[] = { - &omap44xx_hsi__l3_main_2, -}; - -static struct omap_hwmod_addr_space omap44xx_hsi_addrs[] = { - { - .pa_start = 0x4a058000, - .pa_end = 0x4a05bfff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_cfg -> hsi */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__hsi = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_hsi_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_hsi_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* hsi slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_hsi_slaves[] = { - &omap44xx_l4_cfg__hsi, -}; - static struct omap_hwmod omap44xx_hsi_hwmod = { .name = "hsi", .class = &omap44xx_hsi_hwmod_class, @@ -2231,10 +1062,6 @@ static struct omap_hwmod omap44xx_hsi_hwmod = { .modulemode = MODULEMODE_HWCTRL, }, }, - .slaves = omap44xx_hsi_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_hsi_slaves), - .masters = omap44xx_hsi_masters, - .masters_cnt = ARRAY_SIZE(omap44xx_hsi_masters), }; /* @@ -2266,7 +1093,6 @@ static struct omap_i2c_dev_attr i2c_dev_attr = { }; /* i2c1 */ -static struct omap_hwmod omap44xx_i2c1_hwmod; static struct omap_hwmod_irq_info omap44xx_i2c1_irqs[] = { { .irq = 56 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -2278,29 +1104,6 @@ static struct omap_hwmod_dma_info omap44xx_i2c1_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_i2c1_addrs[] = { - { - .pa_start = 0x48070000, - .pa_end = 0x480700ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> i2c1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c1 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_i2c1_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_i2c1_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* i2c1 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_i2c1_slaves[] = { - &omap44xx_l4_per__i2c1, -}; - static struct omap_hwmod omap44xx_i2c1_hwmod = { .name = "i2c1", .class = &omap44xx_i2c_hwmod_class, @@ -2316,13 +1119,10 @@ static struct omap_hwmod omap44xx_i2c1_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_i2c1_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_i2c1_slaves), .dev_attr = &i2c_dev_attr, }; /* i2c2 */ -static struct omap_hwmod omap44xx_i2c2_hwmod; static struct omap_hwmod_irq_info omap44xx_i2c2_irqs[] = { { .irq = 57 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -2334,29 +1134,6 @@ static struct omap_hwmod_dma_info omap44xx_i2c2_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_i2c2_addrs[] = { - { - .pa_start = 0x48072000, - .pa_end = 0x480720ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> i2c2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c2 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_i2c2_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_i2c2_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* i2c2 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_i2c2_slaves[] = { - &omap44xx_l4_per__i2c2, -}; - static struct omap_hwmod omap44xx_i2c2_hwmod = { .name = "i2c2", .class = &omap44xx_i2c_hwmod_class, @@ -2372,13 +1149,10 @@ static struct omap_hwmod omap44xx_i2c2_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_i2c2_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_i2c2_slaves), .dev_attr = &i2c_dev_attr, }; /* i2c3 */ -static struct omap_hwmod omap44xx_i2c3_hwmod; static struct omap_hwmod_irq_info omap44xx_i2c3_irqs[] = { { .irq = 61 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -2390,29 +1164,6 @@ static struct omap_hwmod_dma_info omap44xx_i2c3_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_i2c3_addrs[] = { - { - .pa_start = 0x48060000, - .pa_end = 0x480600ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> i2c3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c3 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_i2c3_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_i2c3_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* i2c3 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_i2c3_slaves[] = { - &omap44xx_l4_per__i2c3, -}; - static struct omap_hwmod omap44xx_i2c3_hwmod = { .name = "i2c3", .class = &omap44xx_i2c_hwmod_class, @@ -2428,13 +1179,10 @@ static struct omap_hwmod omap44xx_i2c3_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_i2c3_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_i2c3_slaves), .dev_attr = &i2c_dev_attr, }; /* i2c4 */ -static struct omap_hwmod omap44xx_i2c4_hwmod; static struct omap_hwmod_irq_info omap44xx_i2c4_irqs[] = { { .irq = 62 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -2446,29 +1194,6 @@ static struct omap_hwmod_dma_info omap44xx_i2c4_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_i2c4_addrs[] = { - { - .pa_start = 0x48350000, - .pa_end = 0x483500ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> i2c4 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c4 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_i2c4_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_i2c4_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* i2c4 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_i2c4_slaves[] = { - &omap44xx_l4_per__i2c4, -}; - static struct omap_hwmod omap44xx_i2c4_hwmod = { .name = "i2c4", .class = &omap44xx_i2c_hwmod_class, @@ -2484,8 +1209,6 @@ static struct omap_hwmod omap44xx_i2c4_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_i2c4_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_i2c4_slaves), .dev_attr = &i2c_dev_attr, }; @@ -2504,66 +1227,12 @@ static struct omap_hwmod_irq_info omap44xx_ipu_irqs[] = { { .irq = -1 } }; -static struct omap_hwmod_rst_info omap44xx_ipu_c0_resets[] = { +static struct omap_hwmod_rst_info omap44xx_ipu_resets[] = { { .name = "cpu0", .rst_shift = 0 }, -}; - -static struct omap_hwmod_rst_info omap44xx_ipu_c1_resets[] = { { .name = "cpu1", .rst_shift = 1 }, -}; - -static struct omap_hwmod_rst_info omap44xx_ipu_resets[] = { { .name = "mmu_cache", .rst_shift = 2 }, }; -/* ipu master ports */ -static struct omap_hwmod_ocp_if *omap44xx_ipu_masters[] = { - &omap44xx_ipu__l3_main_2, -}; - -/* l3_main_2 -> ipu */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ipu = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_ipu_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* ipu slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_ipu_slaves[] = { - &omap44xx_l3_main_2__ipu, -}; - -/* Pseudo hwmod for reset control purpose only */ -static struct omap_hwmod omap44xx_ipu_c0_hwmod = { - .name = "ipu_c0", - .class = &omap44xx_ipu_hwmod_class, - .clkdm_name = "ducati_clkdm", - .flags = HWMOD_INIT_NO_RESET, - .rst_lines = omap44xx_ipu_c0_resets, - .rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_c0_resets), - .prcm = { - .omap4 = { - .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET, - }, - }, -}; - -/* Pseudo hwmod for reset control purpose only */ -static struct omap_hwmod omap44xx_ipu_c1_hwmod = { - .name = "ipu_c1", - .class = &omap44xx_ipu_hwmod_class, - .clkdm_name = "ducati_clkdm", - .flags = HWMOD_INIT_NO_RESET, - .rst_lines = omap44xx_ipu_c1_resets, - .rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_c1_resets), - .prcm = { - .omap4 = { - .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET, - }, - }, -}; - static struct omap_hwmod omap44xx_ipu_hwmod = { .name = "ipu", .class = &omap44xx_ipu_hwmod_class, @@ -2580,10 +1249,6 @@ static struct omap_hwmod omap44xx_ipu_hwmod = { .modulemode = MODULEMODE_HWCTRL, }, }, - .slaves = omap44xx_ipu_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_ipu_slaves), - .masters = omap44xx_ipu_masters, - .masters_cnt = ARRAY_SIZE(omap44xx_ipu_masters), }; /* @@ -2630,34 +1295,6 @@ static struct omap_hwmod_dma_info omap44xx_iss_sdma_reqs[] = { { .dma_req = -1 } }; -/* iss master ports */ -static struct omap_hwmod_ocp_if *omap44xx_iss_masters[] = { - &omap44xx_iss__l3_main_2, -}; - -static struct omap_hwmod_addr_space omap44xx_iss_addrs[] = { - { - .pa_start = 0x52000000, - .pa_end = 0x520000ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l3_main_2 -> iss */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_iss_hwmod, - .clk = "l3_div_ck", - .addr = omap44xx_iss_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* iss slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_iss_slaves[] = { - &omap44xx_l3_main_2__iss, -}; - static struct omap_hwmod_opt_clk iss_opt_clks[] = { { .role = "ctrlclk", .clk = "iss_ctrlclk" }, }; @@ -2678,10 +1315,6 @@ static struct omap_hwmod omap44xx_iss_hwmod = { }, .opt_clks = iss_opt_clks, .opt_clks_cnt = ARRAY_SIZE(iss_opt_clks), - .slaves = omap44xx_iss_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_iss_slaves), - .masters = omap44xx_iss_masters, - .masters_cnt = ARRAY_SIZE(omap44xx_iss_masters), }; /* @@ -2702,75 +1335,9 @@ static struct omap_hwmod_irq_info omap44xx_iva_irqs[] = { }; static struct omap_hwmod_rst_info omap44xx_iva_resets[] = { - { .name = "logic", .rst_shift = 2 }, -}; - -static struct omap_hwmod_rst_info omap44xx_iva_seq0_resets[] = { { .name = "seq0", .rst_shift = 0 }, -}; - -static struct omap_hwmod_rst_info omap44xx_iva_seq1_resets[] = { { .name = "seq1", .rst_shift = 1 }, -}; - -/* iva master ports */ -static struct omap_hwmod_ocp_if *omap44xx_iva_masters[] = { - &omap44xx_iva__l3_main_2, - &omap44xx_iva__l3_instr, -}; - -static struct omap_hwmod_addr_space omap44xx_iva_addrs[] = { - { - .pa_start = 0x5a000000, - .pa_end = 0x5a07ffff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l3_main_2 -> iva */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iva = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_iva_hwmod, - .clk = "l3_div_ck", - .addr = omap44xx_iva_addrs, - .user = OCP_USER_MPU, -}; - -/* iva slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_iva_slaves[] = { - &omap44xx_dsp__iva, - &omap44xx_l3_main_2__iva, -}; - -/* Pseudo hwmod for reset control purpose only */ -static struct omap_hwmod omap44xx_iva_seq0_hwmod = { - .name = "iva_seq0", - .class = &omap44xx_iva_hwmod_class, - .clkdm_name = "ivahd_clkdm", - .flags = HWMOD_INIT_NO_RESET, - .rst_lines = omap44xx_iva_seq0_resets, - .rst_lines_cnt = ARRAY_SIZE(omap44xx_iva_seq0_resets), - .prcm = { - .omap4 = { - .rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET, - }, - }, -}; - -/* Pseudo hwmod for reset control purpose only */ -static struct omap_hwmod omap44xx_iva_seq1_hwmod = { - .name = "iva_seq1", - .class = &omap44xx_iva_hwmod_class, - .clkdm_name = "ivahd_clkdm", - .flags = HWMOD_INIT_NO_RESET, - .rst_lines = omap44xx_iva_seq1_resets, - .rst_lines_cnt = ARRAY_SIZE(omap44xx_iva_seq1_resets), - .prcm = { - .omap4 = { - .rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET, - }, - }, + { .name = "logic", .rst_shift = 2 }, }; static struct omap_hwmod omap44xx_iva_hwmod = { @@ -2789,10 +1356,6 @@ static struct omap_hwmod omap44xx_iva_hwmod = { .modulemode = MODULEMODE_HWCTRL, }, }, - .slaves = omap44xx_iva_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_iva_slaves), - .masters = omap44xx_iva_masters, - .masters_cnt = ARRAY_SIZE(omap44xx_iva_masters), }; /* @@ -2818,35 +1381,11 @@ static struct omap_hwmod_class omap44xx_kbd_hwmod_class = { }; /* kbd */ -static struct omap_hwmod omap44xx_kbd_hwmod; static struct omap_hwmod_irq_info omap44xx_kbd_irqs[] = { { .irq = 120 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_kbd_addrs[] = { - { - .pa_start = 0x4a31c000, - .pa_end = 0x4a31c07f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_wkup -> kbd */ -static struct omap_hwmod_ocp_if omap44xx_l4_wkup__kbd = { - .master = &omap44xx_l4_wkup_hwmod, - .slave = &omap44xx_kbd_hwmod, - .clk = "l4_wkup_clk_mux_ck", - .addr = omap44xx_kbd_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* kbd slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_kbd_slaves[] = { - &omap44xx_l4_wkup__kbd, -}; - static struct omap_hwmod omap44xx_kbd_hwmod = { .name = "kbd", .class = &omap44xx_kbd_hwmod_class, @@ -2860,8 +1399,6 @@ static struct omap_hwmod omap44xx_kbd_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_kbd_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_kbd_slaves), }; /* @@ -2885,35 +1422,11 @@ static struct omap_hwmod_class omap44xx_mailbox_hwmod_class = { }; /* mailbox */ -static struct omap_hwmod omap44xx_mailbox_hwmod; static struct omap_hwmod_irq_info omap44xx_mailbox_irqs[] = { { .irq = 26 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_mailbox_addrs[] = { - { - .pa_start = 0x4a0f4000, - .pa_end = 0x4a0f41ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_cfg -> mailbox */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mailbox = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_mailbox_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_mailbox_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mailbox slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_mailbox_slaves[] = { - &omap44xx_l4_cfg__mailbox, -}; - static struct omap_hwmod omap44xx_mailbox_hwmod = { .name = "mailbox", .class = &omap44xx_mailbox_hwmod_class, @@ -2925,8 +1438,6 @@ static struct omap_hwmod omap44xx_mailbox_hwmod = { .context_offs = OMAP4_RM_L4CFG_MAILBOX_CONTEXT_OFFSET, }, }, - .slaves = omap44xx_mailbox_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_mailbox_slaves), }; /* @@ -2949,7 +1460,6 @@ static struct omap_hwmod_class omap44xx_mcbsp_hwmod_class = { }; /* mcbsp1 */ -static struct omap_hwmod omap44xx_mcbsp1_hwmod; static struct omap_hwmod_irq_info omap44xx_mcbsp1_irqs[] = { { .irq = 17 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -2961,50 +1471,6 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp1_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_mcbsp1_addrs[] = { - { - .name = "mpu", - .pa_start = 0x40122000, - .pa_end = 0x401220ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> mcbsp1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1 = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp1_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_mcbsp1_addrs, - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_addr_space omap44xx_mcbsp1_dma_addrs[] = { - { - .name = "dma", - .pa_start = 0x49022000, - .pa_end = 0x490220ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> mcbsp1 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp1_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_mcbsp1_dma_addrs, - .user = OCP_USER_SDMA, -}; - -/* mcbsp1 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_mcbsp1_slaves[] = { - &omap44xx_l4_abe__mcbsp1, - &omap44xx_l4_abe__mcbsp1_dma, -}; - static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, { .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" }, @@ -3024,14 +1490,11 @@ static struct omap_hwmod omap44xx_mcbsp1_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_mcbsp1_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp1_slaves), .opt_clks = mcbsp1_opt_clks, .opt_clks_cnt = ARRAY_SIZE(mcbsp1_opt_clks), }; /* mcbsp2 */ -static struct omap_hwmod omap44xx_mcbsp2_hwmod; static struct omap_hwmod_irq_info omap44xx_mcbsp2_irqs[] = { { .irq = 22 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -3043,50 +1506,6 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp2_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_mcbsp2_addrs[] = { - { - .name = "mpu", - .pa_start = 0x40124000, - .pa_end = 0x401240ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> mcbsp2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2 = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp2_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_mcbsp2_addrs, - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_addr_space omap44xx_mcbsp2_dma_addrs[] = { - { - .name = "dma", - .pa_start = 0x49024000, - .pa_end = 0x490240ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> mcbsp2 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp2_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_mcbsp2_dma_addrs, - .user = OCP_USER_SDMA, -}; - -/* mcbsp2 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_mcbsp2_slaves[] = { - &omap44xx_l4_abe__mcbsp2, - &omap44xx_l4_abe__mcbsp2_dma, -}; - static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, { .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" }, @@ -3106,14 +1525,11 @@ static struct omap_hwmod omap44xx_mcbsp2_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_mcbsp2_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp2_slaves), .opt_clks = mcbsp2_opt_clks, .opt_clks_cnt = ARRAY_SIZE(mcbsp2_opt_clks), }; /* mcbsp3 */ -static struct omap_hwmod omap44xx_mcbsp3_hwmod; static struct omap_hwmod_irq_info omap44xx_mcbsp3_irqs[] = { { .irq = 23 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -3125,50 +1541,6 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp3_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_mcbsp3_addrs[] = { - { - .name = "mpu", - .pa_start = 0x40126000, - .pa_end = 0x401260ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> mcbsp3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3 = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp3_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_mcbsp3_addrs, - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_addr_space omap44xx_mcbsp3_dma_addrs[] = { - { - .name = "dma", - .pa_start = 0x49026000, - .pa_end = 0x490260ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> mcbsp3 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp3_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_mcbsp3_dma_addrs, - .user = OCP_USER_SDMA, -}; - -/* mcbsp3 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_mcbsp3_slaves[] = { - &omap44xx_l4_abe__mcbsp3, - &omap44xx_l4_abe__mcbsp3_dma, -}; - static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, { .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" }, @@ -3188,14 +1560,11 @@ static struct omap_hwmod omap44xx_mcbsp3_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_mcbsp3_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp3_slaves), .opt_clks = mcbsp3_opt_clks, .opt_clks_cnt = ARRAY_SIZE(mcbsp3_opt_clks), }; /* mcbsp4 */ -static struct omap_hwmod omap44xx_mcbsp4_hwmod; static struct omap_hwmod_irq_info omap44xx_mcbsp4_irqs[] = { { .irq = 16 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -3207,29 +1576,6 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp4_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_mcbsp4_addrs[] = { - { - .pa_start = 0x48096000, - .pa_end = 0x480960ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> mcbsp4 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mcbsp4 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mcbsp4_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_mcbsp4_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mcbsp4 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_mcbsp4_slaves[] = { - &omap44xx_l4_per__mcbsp4, -}; - static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, { .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" }, @@ -3249,8 +1595,6 @@ static struct omap_hwmod omap44xx_mcbsp4_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_mcbsp4_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp4_slaves), .opt_clks = mcbsp4_opt_clks, .opt_clks_cnt = ARRAY_SIZE(mcbsp4_opt_clks), }; @@ -3277,7 +1621,6 @@ static struct omap_hwmod_class omap44xx_mcpdm_hwmod_class = { }; /* mcpdm */ -static struct omap_hwmod omap44xx_mcpdm_hwmod; static struct omap_hwmod_irq_info omap44xx_mcpdm_irqs[] = { { .irq = 112 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -3289,48 +1632,6 @@ static struct omap_hwmod_dma_info omap44xx_mcpdm_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_mcpdm_addrs[] = { - { - .pa_start = 0x40132000, - .pa_end = 0x4013207f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> mcpdm */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcpdm_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_mcpdm_addrs, - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_addr_space omap44xx_mcpdm_dma_addrs[] = { - { - .pa_start = 0x49032000, - .pa_end = 0x4903207f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> mcpdm (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcpdm_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_mcpdm_dma_addrs, - .user = OCP_USER_SDMA, -}; - -/* mcpdm slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_mcpdm_slaves[] = { - &omap44xx_l4_abe__mcpdm, - &omap44xx_l4_abe__mcpdm_dma, -}; - static struct omap_hwmod omap44xx_mcpdm_hwmod = { .name = "mcpdm", .class = &omap44xx_mcpdm_hwmod_class, @@ -3345,8 +1646,6 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_mcpdm_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_mcpdm_slaves), }; /* @@ -3372,7 +1671,6 @@ static struct omap_hwmod_class omap44xx_mcspi_hwmod_class = { }; /* mcspi1 */ -static struct omap_hwmod omap44xx_mcspi1_hwmod; static struct omap_hwmod_irq_info omap44xx_mcspi1_irqs[] = { { .irq = 65 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -3390,29 +1688,6 @@ static struct omap_hwmod_dma_info omap44xx_mcspi1_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_mcspi1_addrs[] = { - { - .pa_start = 0x48098000, - .pa_end = 0x480981ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> mcspi1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi1 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mcspi1_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_mcspi1_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mcspi1 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_mcspi1_slaves[] = { - &omap44xx_l4_per__mcspi1, -}; - /* mcspi1 dev_attr */ static struct omap2_mcspi_dev_attr mcspi1_dev_attr = { .num_chipselect = 4, @@ -3433,12 +1708,9 @@ static struct omap_hwmod omap44xx_mcspi1_hwmod = { }, }, .dev_attr = &mcspi1_dev_attr, - .slaves = omap44xx_mcspi1_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi1_slaves), }; /* mcspi2 */ -static struct omap_hwmod omap44xx_mcspi2_hwmod; static struct omap_hwmod_irq_info omap44xx_mcspi2_irqs[] = { { .irq = 66 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -3452,29 +1724,6 @@ static struct omap_hwmod_dma_info omap44xx_mcspi2_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_mcspi2_addrs[] = { - { - .pa_start = 0x4809a000, - .pa_end = 0x4809a1ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> mcspi2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi2 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mcspi2_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_mcspi2_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mcspi2 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_mcspi2_slaves[] = { - &omap44xx_l4_per__mcspi2, -}; - /* mcspi2 dev_attr */ static struct omap2_mcspi_dev_attr mcspi2_dev_attr = { .num_chipselect = 2, @@ -3495,12 +1744,9 @@ static struct omap_hwmod omap44xx_mcspi2_hwmod = { }, }, .dev_attr = &mcspi2_dev_attr, - .slaves = omap44xx_mcspi2_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi2_slaves), }; /* mcspi3 */ -static struct omap_hwmod omap44xx_mcspi3_hwmod; static struct omap_hwmod_irq_info omap44xx_mcspi3_irqs[] = { { .irq = 91 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -3514,29 +1760,6 @@ static struct omap_hwmod_dma_info omap44xx_mcspi3_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_mcspi3_addrs[] = { - { - .pa_start = 0x480b8000, - .pa_end = 0x480b81ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> mcspi3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi3 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mcspi3_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_mcspi3_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mcspi3 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_mcspi3_slaves[] = { - &omap44xx_l4_per__mcspi3, -}; - /* mcspi3 dev_attr */ static struct omap2_mcspi_dev_attr mcspi3_dev_attr = { .num_chipselect = 2, @@ -3557,12 +1780,9 @@ static struct omap_hwmod omap44xx_mcspi3_hwmod = { }, }, .dev_attr = &mcspi3_dev_attr, - .slaves = omap44xx_mcspi3_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi3_slaves), }; /* mcspi4 */ -static struct omap_hwmod omap44xx_mcspi4_hwmod; static struct omap_hwmod_irq_info omap44xx_mcspi4_irqs[] = { { .irq = 48 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -3574,29 +1794,6 @@ static struct omap_hwmod_dma_info omap44xx_mcspi4_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_mcspi4_addrs[] = { - { - .pa_start = 0x480ba000, - .pa_end = 0x480ba1ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> mcspi4 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi4 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mcspi4_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_mcspi4_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mcspi4 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_mcspi4_slaves[] = { - &omap44xx_l4_per__mcspi4, -}; - /* mcspi4 dev_attr */ static struct omap2_mcspi_dev_attr mcspi4_dev_attr = { .num_chipselect = 1, @@ -3617,8 +1814,6 @@ static struct omap_hwmod omap44xx_mcspi4_hwmod = { }, }, .dev_attr = &mcspi4_dev_attr, - .slaves = omap44xx_mcspi4_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi4_slaves), }; /* @@ -3655,34 +1850,6 @@ static struct omap_hwmod_dma_info omap44xx_mmc1_sdma_reqs[] = { { .dma_req = -1 } }; -/* mmc1 master ports */ -static struct omap_hwmod_ocp_if *omap44xx_mmc1_masters[] = { - &omap44xx_mmc1__l3_main_1, -}; - -static struct omap_hwmod_addr_space omap44xx_mmc1_addrs[] = { - { - .pa_start = 0x4809c000, - .pa_end = 0x4809c3ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> mmc1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc1 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mmc1_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_mmc1_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mmc1 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_mmc1_slaves[] = { - &omap44xx_l4_per__mmc1, -}; - /* mmc1 dev_attr */ static struct omap_mmc_dev_attr mmc1_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, @@ -3703,10 +1870,6 @@ static struct omap_hwmod omap44xx_mmc1_hwmod = { }, }, .dev_attr = &mmc1_dev_attr, - .slaves = omap44xx_mmc1_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_mmc1_slaves), - .masters = omap44xx_mmc1_masters, - .masters_cnt = ARRAY_SIZE(omap44xx_mmc1_masters), }; /* mmc2 */ @@ -3721,34 +1884,6 @@ static struct omap_hwmod_dma_info omap44xx_mmc2_sdma_reqs[] = { { .dma_req = -1 } }; -/* mmc2 master ports */ -static struct omap_hwmod_ocp_if *omap44xx_mmc2_masters[] = { - &omap44xx_mmc2__l3_main_1, -}; - -static struct omap_hwmod_addr_space omap44xx_mmc2_addrs[] = { - { - .pa_start = 0x480b4000, - .pa_end = 0x480b43ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> mmc2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc2 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mmc2_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_mmc2_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mmc2 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_mmc2_slaves[] = { - &omap44xx_l4_per__mmc2, -}; - static struct omap_hwmod omap44xx_mmc2_hwmod = { .name = "mmc2", .class = &omap44xx_mmc_hwmod_class, @@ -3763,14 +1898,9 @@ static struct omap_hwmod omap44xx_mmc2_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_mmc2_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_mmc2_slaves), - .masters = omap44xx_mmc2_masters, - .masters_cnt = ARRAY_SIZE(omap44xx_mmc2_masters), }; /* mmc3 */ -static struct omap_hwmod omap44xx_mmc3_hwmod; static struct omap_hwmod_irq_info omap44xx_mmc3_irqs[] = { { .irq = 94 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -3782,29 +1912,6 @@ static struct omap_hwmod_dma_info omap44xx_mmc3_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_mmc3_addrs[] = { - { - .pa_start = 0x480ad000, - .pa_end = 0x480ad3ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> mmc3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc3 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mmc3_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_mmc3_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mmc3 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_mmc3_slaves[] = { - &omap44xx_l4_per__mmc3, -}; - static struct omap_hwmod omap44xx_mmc3_hwmod = { .name = "mmc3", .class = &omap44xx_mmc_hwmod_class, @@ -3819,12 +1926,9 @@ static struct omap_hwmod omap44xx_mmc3_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_mmc3_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_mmc3_slaves), }; /* mmc4 */ -static struct omap_hwmod omap44xx_mmc4_hwmod; static struct omap_hwmod_irq_info omap44xx_mmc4_irqs[] = { { .irq = 96 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -3836,35 +1940,11 @@ static struct omap_hwmod_dma_info omap44xx_mmc4_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_mmc4_addrs[] = { - { - .pa_start = 0x480d1000, - .pa_end = 0x480d13ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> mmc4 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc4 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mmc4_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_mmc4_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mmc4 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_mmc4_slaves[] = { - &omap44xx_l4_per__mmc4, -}; - static struct omap_hwmod omap44xx_mmc4_hwmod = { .name = "mmc4", .class = &omap44xx_mmc_hwmod_class, .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_mmc4_irqs, - .sdma_reqs = omap44xx_mmc4_sdma_reqs, .main_clk = "mmc4_fck", .prcm = { @@ -3874,12 +1954,9 @@ static struct omap_hwmod omap44xx_mmc4_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_mmc4_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_mmc4_slaves), }; /* mmc5 */ -static struct omap_hwmod omap44xx_mmc5_hwmod; static struct omap_hwmod_irq_info omap44xx_mmc5_irqs[] = { { .irq = 59 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -3891,29 +1968,6 @@ static struct omap_hwmod_dma_info omap44xx_mmc5_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_mmc5_addrs[] = { - { - .pa_start = 0x480d5000, - .pa_end = 0x480d53ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> mmc5 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc5 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_mmc5_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_mmc5_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mmc5 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_mmc5_slaves[] = { - &omap44xx_l4_per__mmc5, -}; - static struct omap_hwmod omap44xx_mmc5_hwmod = { .name = "mmc5", .class = &omap44xx_mmc_hwmod_class, @@ -3928,8 +1982,6 @@ static struct omap_hwmod omap44xx_mmc5_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_mmc5_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_mmc5_slaves), }; /* @@ -3949,13 +2001,6 @@ static struct omap_hwmod_irq_info omap44xx_mpu_irqs[] = { { .irq = -1 } }; -/* mpu master ports */ -static struct omap_hwmod_ocp_if *omap44xx_mpu_masters[] = { - &omap44xx_mpu__l3_main_1, - &omap44xx_mpu__l4_abe, - &omap44xx_mpu__dmm, -}; - static struct omap_hwmod omap44xx_mpu_hwmod = { .name = "mpu", .class = &omap44xx_mpu_hwmod_class, @@ -3969,8 +2014,6 @@ static struct omap_hwmod omap44xx_mpu_hwmod = { .context_offs = OMAP4_RM_MPU_MPU_CONTEXT_OFFSET, }, }, - .masters = omap44xx_mpu_masters, - .masters_cnt = ARRAY_SIZE(omap44xx_mpu_masters), }; /* @@ -4004,35 +2047,11 @@ static struct omap_smartreflex_dev_attr smartreflex_core_dev_attr = { .sensor_voltdm_name = "core", }; -static struct omap_hwmod omap44xx_smartreflex_core_hwmod; static struct omap_hwmod_irq_info omap44xx_smartreflex_core_irqs[] = { { .irq = 19 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_smartreflex_core_addrs[] = { - { - .pa_start = 0x4a0dd000, - .pa_end = 0x4a0dd03f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_cfg -> smartreflex_core */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_core = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_smartreflex_core_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_smartreflex_core_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* smartreflex_core slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_smartreflex_core_slaves[] = { - &omap44xx_l4_cfg__smartreflex_core, -}; - static struct omap_hwmod omap44xx_smartreflex_core_hwmod = { .name = "smartreflex_core", .class = &omap44xx_smartreflex_hwmod_class, @@ -4047,8 +2066,6 @@ static struct omap_hwmod omap44xx_smartreflex_core_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_smartreflex_core_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_core_slaves), .dev_attr = &smartreflex_core_dev_attr, }; @@ -4057,35 +2074,11 @@ static struct omap_smartreflex_dev_attr smartreflex_iva_dev_attr = { .sensor_voltdm_name = "iva", }; -static struct omap_hwmod omap44xx_smartreflex_iva_hwmod; static struct omap_hwmod_irq_info omap44xx_smartreflex_iva_irqs[] = { { .irq = 102 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_smartreflex_iva_addrs[] = { - { - .pa_start = 0x4a0db000, - .pa_end = 0x4a0db03f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_cfg -> smartreflex_iva */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_iva = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_smartreflex_iva_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_smartreflex_iva_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* smartreflex_iva slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_smartreflex_iva_slaves[] = { - &omap44xx_l4_cfg__smartreflex_iva, -}; - static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = { .name = "smartreflex_iva", .class = &omap44xx_smartreflex_hwmod_class, @@ -4099,8 +2092,6 @@ static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_smartreflex_iva_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_iva_slaves), .dev_attr = &smartreflex_iva_dev_attr, }; @@ -4109,35 +2100,11 @@ static struct omap_smartreflex_dev_attr smartreflex_mpu_dev_attr = { .sensor_voltdm_name = "mpu", }; -static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod; static struct omap_hwmod_irq_info omap44xx_smartreflex_mpu_irqs[] = { { .irq = 18 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_smartreflex_mpu_addrs[] = { - { - .pa_start = 0x4a0d9000, - .pa_end = 0x4a0d903f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_cfg -> smartreflex_mpu */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_mpu = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_smartreflex_mpu_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_smartreflex_mpu_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* smartreflex_mpu slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_smartreflex_mpu_slaves[] = { - &omap44xx_l4_cfg__smartreflex_mpu, -}; - static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = { .name = "smartreflex_mpu", .class = &omap44xx_smartreflex_hwmod_class, @@ -4151,8 +2118,6 @@ static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_smartreflex_mpu_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_mpu_slaves), .dev_attr = &smartreflex_mpu_dev_attr, }; @@ -4180,30 +2145,6 @@ static struct omap_hwmod_class omap44xx_spinlock_hwmod_class = { }; /* spinlock */ -static struct omap_hwmod omap44xx_spinlock_hwmod; -static struct omap_hwmod_addr_space omap44xx_spinlock_addrs[] = { - { - .pa_start = 0x4a0f6000, - .pa_end = 0x4a0f6fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_cfg -> spinlock */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__spinlock = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_spinlock_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_spinlock_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* spinlock slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_spinlock_slaves[] = { - &omap44xx_l4_cfg__spinlock, -}; - static struct omap_hwmod omap44xx_spinlock_hwmod = { .name = "spinlock", .class = &omap44xx_spinlock_hwmod_class, @@ -4214,8 +2155,6 @@ static struct omap_hwmod omap44xx_spinlock_hwmod = { .context_offs = OMAP4_RM_L4CFG_HW_SEM_CONTEXT_OFFSET, }, }, - .slaves = omap44xx_spinlock_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_spinlock_slaves), }; /* @@ -4267,35 +2206,11 @@ static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = { }; /* timer1 */ -static struct omap_hwmod omap44xx_timer1_hwmod; static struct omap_hwmod_irq_info omap44xx_timer1_irqs[] = { { .irq = 37 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_timer1_addrs[] = { - { - .pa_start = 0x4a318000, - .pa_end = 0x4a31807f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_wkup -> timer1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_wkup__timer1 = { - .master = &omap44xx_l4_wkup_hwmod, - .slave = &omap44xx_timer1_hwmod, - .clk = "l4_wkup_clk_mux_ck", - .addr = omap44xx_timer1_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer1 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_timer1_slaves[] = { - &omap44xx_l4_wkup__timer1, -}; - static struct omap_hwmod omap44xx_timer1_hwmod = { .name = "timer1", .class = &omap44xx_timer_1ms_hwmod_class, @@ -4310,40 +2225,14 @@ static struct omap_hwmod omap44xx_timer1_hwmod = { }, }, .dev_attr = &capability_alwon_dev_attr, - .slaves = omap44xx_timer1_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_timer1_slaves), }; /* timer2 */ -static struct omap_hwmod omap44xx_timer2_hwmod; static struct omap_hwmod_irq_info omap44xx_timer2_irqs[] = { { .irq = 38 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_timer2_addrs[] = { - { - .pa_start = 0x48032000, - .pa_end = 0x4803207f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> timer2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__timer2 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_timer2_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_timer2_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer2 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_timer2_slaves[] = { - &omap44xx_l4_per__timer2, -}; - static struct omap_hwmod omap44xx_timer2_hwmod = { .name = "timer2", .class = &omap44xx_timer_1ms_hwmod_class, @@ -4358,40 +2247,14 @@ static struct omap_hwmod omap44xx_timer2_hwmod = { }, }, .dev_attr = &capability_alwon_dev_attr, - .slaves = omap44xx_timer2_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_timer2_slaves), }; /* timer3 */ -static struct omap_hwmod omap44xx_timer3_hwmod; static struct omap_hwmod_irq_info omap44xx_timer3_irqs[] = { { .irq = 39 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_timer3_addrs[] = { - { - .pa_start = 0x48034000, - .pa_end = 0x4803407f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> timer3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__timer3 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_timer3_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_timer3_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer3 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_timer3_slaves[] = { - &omap44xx_l4_per__timer3, -}; - static struct omap_hwmod omap44xx_timer3_hwmod = { .name = "timer3", .class = &omap44xx_timer_hwmod_class, @@ -4406,40 +2269,14 @@ static struct omap_hwmod omap44xx_timer3_hwmod = { }, }, .dev_attr = &capability_alwon_dev_attr, - .slaves = omap44xx_timer3_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_timer3_slaves), }; /* timer4 */ -static struct omap_hwmod omap44xx_timer4_hwmod; static struct omap_hwmod_irq_info omap44xx_timer4_irqs[] = { { .irq = 40 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_timer4_addrs[] = { - { - .pa_start = 0x48036000, - .pa_end = 0x4803607f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> timer4 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__timer4 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_timer4_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_timer4_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer4 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_timer4_slaves[] = { - &omap44xx_l4_per__timer4, -}; - static struct omap_hwmod omap44xx_timer4_hwmod = { .name = "timer4", .class = &omap44xx_timer_hwmod_class, @@ -4454,59 +2291,14 @@ static struct omap_hwmod omap44xx_timer4_hwmod = { }, }, .dev_attr = &capability_alwon_dev_attr, - .slaves = omap44xx_timer4_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_timer4_slaves), }; /* timer5 */ -static struct omap_hwmod omap44xx_timer5_hwmod; static struct omap_hwmod_irq_info omap44xx_timer5_irqs[] = { { .irq = 41 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_timer5_addrs[] = { - { - .pa_start = 0x40138000, - .pa_end = 0x4013807f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> timer5 */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5 = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer5_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_timer5_addrs, - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_addr_space omap44xx_timer5_dma_addrs[] = { - { - .pa_start = 0x49038000, - .pa_end = 0x4903807f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> timer5 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer5_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_timer5_dma_addrs, - .user = OCP_USER_SDMA, -}; - -/* timer5 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_timer5_slaves[] = { - &omap44xx_l4_abe__timer5, - &omap44xx_l4_abe__timer5_dma, -}; - static struct omap_hwmod omap44xx_timer5_hwmod = { .name = "timer5", .class = &omap44xx_timer_hwmod_class, @@ -4521,59 +2313,14 @@ static struct omap_hwmod omap44xx_timer5_hwmod = { }, }, .dev_attr = &capability_alwon_dev_attr, - .slaves = omap44xx_timer5_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_timer5_slaves), }; /* timer6 */ -static struct omap_hwmod omap44xx_timer6_hwmod; static struct omap_hwmod_irq_info omap44xx_timer6_irqs[] = { { .irq = 42 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_timer6_addrs[] = { - { - .pa_start = 0x4013a000, - .pa_end = 0x4013a07f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> timer6 */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6 = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer6_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_timer6_addrs, - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_addr_space omap44xx_timer6_dma_addrs[] = { - { - .pa_start = 0x4903a000, - .pa_end = 0x4903a07f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> timer6 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer6_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_timer6_dma_addrs, - .user = OCP_USER_SDMA, -}; - -/* timer6 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_timer6_slaves[] = { - &omap44xx_l4_abe__timer6, - &omap44xx_l4_abe__timer6_dma, -}; - static struct omap_hwmod omap44xx_timer6_hwmod = { .name = "timer6", .class = &omap44xx_timer_hwmod_class, @@ -4589,59 +2336,14 @@ static struct omap_hwmod omap44xx_timer6_hwmod = { }, }, .dev_attr = &capability_alwon_dev_attr, - .slaves = omap44xx_timer6_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_timer6_slaves), }; /* timer7 */ -static struct omap_hwmod omap44xx_timer7_hwmod; static struct omap_hwmod_irq_info omap44xx_timer7_irqs[] = { { .irq = 43 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_timer7_addrs[] = { - { - .pa_start = 0x4013c000, - .pa_end = 0x4013c07f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> timer7 */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7 = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer7_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_timer7_addrs, - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_addr_space omap44xx_timer7_dma_addrs[] = { - { - .pa_start = 0x4903c000, - .pa_end = 0x4903c07f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> timer7 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer7_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_timer7_dma_addrs, - .user = OCP_USER_SDMA, -}; - -/* timer7 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_timer7_slaves[] = { - &omap44xx_l4_abe__timer7, - &omap44xx_l4_abe__timer7_dma, -}; - static struct omap_hwmod omap44xx_timer7_hwmod = { .name = "timer7", .class = &omap44xx_timer_hwmod_class, @@ -4656,59 +2358,14 @@ static struct omap_hwmod omap44xx_timer7_hwmod = { }, }, .dev_attr = &capability_alwon_dev_attr, - .slaves = omap44xx_timer7_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_timer7_slaves), }; /* timer8 */ -static struct omap_hwmod omap44xx_timer8_hwmod; static struct omap_hwmod_irq_info omap44xx_timer8_irqs[] = { { .irq = 44 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_timer8_addrs[] = { - { - .pa_start = 0x4013e000, - .pa_end = 0x4013e07f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> timer8 */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8 = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer8_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_timer8_addrs, - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_addr_space omap44xx_timer8_dma_addrs[] = { - { - .pa_start = 0x4903e000, - .pa_end = 0x4903e07f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_abe -> timer8 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer8_hwmod, - .clk = "ocp_abe_iclk", - .addr = omap44xx_timer8_dma_addrs, - .user = OCP_USER_SDMA, -}; - -/* timer8 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_timer8_slaves[] = { - &omap44xx_l4_abe__timer8, - &omap44xx_l4_abe__timer8_dma, -}; - static struct omap_hwmod omap44xx_timer8_hwmod = { .name = "timer8", .class = &omap44xx_timer_hwmod_class, @@ -4723,40 +2380,14 @@ static struct omap_hwmod omap44xx_timer8_hwmod = { }, }, .dev_attr = &capability_pwm_dev_attr, - .slaves = omap44xx_timer8_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_timer8_slaves), }; /* timer9 */ -static struct omap_hwmod omap44xx_timer9_hwmod; static struct omap_hwmod_irq_info omap44xx_timer9_irqs[] = { { .irq = 45 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_timer9_addrs[] = { - { - .pa_start = 0x4803e000, - .pa_end = 0x4803e07f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> timer9 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__timer9 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_timer9_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_timer9_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer9 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_timer9_slaves[] = { - &omap44xx_l4_per__timer9, -}; - static struct omap_hwmod omap44xx_timer9_hwmod = { .name = "timer9", .class = &omap44xx_timer_hwmod_class, @@ -4771,40 +2402,14 @@ static struct omap_hwmod omap44xx_timer9_hwmod = { }, }, .dev_attr = &capability_pwm_dev_attr, - .slaves = omap44xx_timer9_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_timer9_slaves), }; /* timer10 */ -static struct omap_hwmod omap44xx_timer10_hwmod; static struct omap_hwmod_irq_info omap44xx_timer10_irqs[] = { { .irq = 46 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_timer10_addrs[] = { - { - .pa_start = 0x48086000, - .pa_end = 0x4808607f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> timer10 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__timer10 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_timer10_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_timer10_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer10 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_timer10_slaves[] = { - &omap44xx_l4_per__timer10, -}; - static struct omap_hwmod omap44xx_timer10_hwmod = { .name = "timer10", .class = &omap44xx_timer_1ms_hwmod_class, @@ -4819,40 +2424,14 @@ static struct omap_hwmod omap44xx_timer10_hwmod = { }, }, .dev_attr = &capability_pwm_dev_attr, - .slaves = omap44xx_timer10_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_timer10_slaves), }; /* timer11 */ -static struct omap_hwmod omap44xx_timer11_hwmod; static struct omap_hwmod_irq_info omap44xx_timer11_irqs[] = { { .irq = 47 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_timer11_addrs[] = { - { - .pa_start = 0x48088000, - .pa_end = 0x4808807f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> timer11 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__timer11 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_timer11_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_timer11_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* timer11 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_timer11_slaves[] = { - &omap44xx_l4_per__timer11, -}; - static struct omap_hwmod omap44xx_timer11_hwmod = { .name = "timer11", .class = &omap44xx_timer_hwmod_class, @@ -4867,8 +2446,6 @@ static struct omap_hwmod omap44xx_timer11_hwmod = { }, }, .dev_attr = &capability_pwm_dev_attr, - .slaves = omap44xx_timer11_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_timer11_slaves), }; /* @@ -4894,7 +2471,6 @@ static struct omap_hwmod_class omap44xx_uart_hwmod_class = { }; /* uart1 */ -static struct omap_hwmod omap44xx_uart1_hwmod; static struct omap_hwmod_irq_info omap44xx_uart1_irqs[] = { { .irq = 72 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -4906,29 +2482,6 @@ static struct omap_hwmod_dma_info omap44xx_uart1_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_uart1_addrs[] = { - { - .pa_start = 0x4806a000, - .pa_end = 0x4806a0ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> uart1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__uart1 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_uart1_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_uart1_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* uart1 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_uart1_slaves[] = { - &omap44xx_l4_per__uart1, -}; - static struct omap_hwmod omap44xx_uart1_hwmod = { .name = "uart1", .class = &omap44xx_uart_hwmod_class, @@ -4943,12 +2496,9 @@ static struct omap_hwmod omap44xx_uart1_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_uart1_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_uart1_slaves), }; /* uart2 */ -static struct omap_hwmod omap44xx_uart2_hwmod; static struct omap_hwmod_irq_info omap44xx_uart2_irqs[] = { { .irq = 73 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -4960,29 +2510,6 @@ static struct omap_hwmod_dma_info omap44xx_uart2_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_uart2_addrs[] = { - { - .pa_start = 0x4806c000, - .pa_end = 0x4806c0ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> uart2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__uart2 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_uart2_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_uart2_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* uart2 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_uart2_slaves[] = { - &omap44xx_l4_per__uart2, -}; - static struct omap_hwmod omap44xx_uart2_hwmod = { .name = "uart2", .class = &omap44xx_uart_hwmod_class, @@ -4997,12 +2524,9 @@ static struct omap_hwmod omap44xx_uart2_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_uart2_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_uart2_slaves), }; /* uart3 */ -static struct omap_hwmod omap44xx_uart3_hwmod; static struct omap_hwmod_irq_info omap44xx_uart3_irqs[] = { { .irq = 74 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -5014,29 +2538,6 @@ static struct omap_hwmod_dma_info omap44xx_uart3_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_uart3_addrs[] = { - { - .pa_start = 0x48020000, - .pa_end = 0x480200ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> uart3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__uart3 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_uart3_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_uart3_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* uart3 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_uart3_slaves[] = { - &omap44xx_l4_per__uart3, -}; - static struct omap_hwmod omap44xx_uart3_hwmod = { .name = "uart3", .class = &omap44xx_uart_hwmod_class, @@ -5052,12 +2553,9 @@ static struct omap_hwmod omap44xx_uart3_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_uart3_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_uart3_slaves), }; /* uart4 */ -static struct omap_hwmod omap44xx_uart4_hwmod; static struct omap_hwmod_irq_info omap44xx_uart4_irqs[] = { { .irq = 70 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } @@ -5069,29 +2567,6 @@ static struct omap_hwmod_dma_info omap44xx_uart4_sdma_reqs[] = { { .dma_req = -1 } }; -static struct omap_hwmod_addr_space omap44xx_uart4_addrs[] = { - { - .pa_start = 0x4806e000, - .pa_end = 0x4806e0ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_per -> uart4 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__uart4 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_uart4_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_uart4_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* uart4 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_uart4_slaves[] = { - &omap44xx_l4_per__uart4, -}; - static struct omap_hwmod omap44xx_uart4_hwmod = { .name = "uart4", .class = &omap44xx_uart_hwmod_class, @@ -5106,8 +2581,98 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_uart4_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_uart4_slaves), +}; + +/* + * 'usb_host_hs' class + * high-speed multi-port usb host controller + */ + +static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = { + .name = "usb_host_hs", + .sysc = &omap44xx_usb_host_hs_sysc, +}; + +/* usb_host_hs */ +static struct omap_hwmod_irq_info omap44xx_usb_host_hs_irqs[] = { + { .name = "ohci-irq", .irq = 76 + OMAP44XX_IRQ_GIC_START }, + { .name = "ehci-irq", .irq = 77 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } +}; + +static struct omap_hwmod omap44xx_usb_host_hs_hwmod = { + .name = "usb_host_hs", + .class = &omap44xx_usb_host_hs_hwmod_class, + .clkdm_name = "l3_init_clkdm", + .main_clk = "usb_host_hs_fck", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .mpu_irqs = omap44xx_usb_host_hs_irqs, + + /* + * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock + * id: i660 + * + * Description: + * In the following configuration : + * - USBHOST module is set to smart-idle mode + * - PRCM asserts idle_req to the USBHOST module ( This typically + * happens when the system is going to a low power mode : all ports + * have been suspended, the master part of the USBHOST module has + * entered the standby state, and SW has cut the functional clocks) + * - an USBHOST interrupt occurs before the module is able to answer + * idle_ack, typically a remote wakeup IRQ. + * Then the USB HOST module will enter a deadlock situation where it + * is no more accessible nor functional. + * + * Workaround: + * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE + */ + + /* + * Errata: USB host EHCI may stall when entering smart-standby mode + * Id: i571 + * + * Description: + * When the USBHOST module is set to smart-standby mode, and when it is + * ready to enter the standby state (i.e. all ports are suspended and + * all attached devices are in suspend mode), then it can wrongly assert + * the Mstandby signal too early while there are still some residual OCP + * transactions ongoing. If this condition occurs, the internal state + * machine may go to an undefined state and the USB link may be stuck + * upon the next resume. + * + * Workaround: + * Don't use smart standby; use only force standby, + * hence HWMOD_SWSUP_MSTANDBY + */ + + /* + * During system boot; If the hwmod framework resets the module + * the module will have smart idle settings; which can lead to deadlock + * (above Errata Id:i660); so, dont reset the module during boot; + * Use HWMOD_INIT_NO_RESET. + */ + + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY | + HWMOD_INIT_NO_RESET, }; /* @@ -5140,34 +2705,6 @@ static struct omap_hwmod_irq_info omap44xx_usb_otg_hs_irqs[] = { { .irq = -1 } }; -/* usb_otg_hs master ports */ -static struct omap_hwmod_ocp_if *omap44xx_usb_otg_hs_masters[] = { - &omap44xx_usb_otg_hs__l3_main_2, -}; - -static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = { - { - .pa_start = 0x4a0ab000, - .pa_end = 0x4a0ab003, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_cfg -> usb_otg_hs */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_otg_hs = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_usb_otg_hs_hwmod, - .clk = "l4_div_ck", - .addr = omap44xx_usb_otg_hs_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* usb_otg_hs slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_usb_otg_hs_slaves[] = { - &omap44xx_l4_cfg__usb_otg_hs, -}; - static struct omap_hwmod_opt_clk usb_otg_hs_opt_clks[] = { { .role = "xclk", .clk = "usb_otg_hs_xclk" }, }; @@ -5188,10 +2725,47 @@ static struct omap_hwmod omap44xx_usb_otg_hs_hwmod = { }, .opt_clks = usb_otg_hs_opt_clks, .opt_clks_cnt = ARRAY_SIZE(usb_otg_hs_opt_clks), - .slaves = omap44xx_usb_otg_hs_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_slaves), - .masters = omap44xx_usb_otg_hs_masters, - .masters_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_masters), +}; + +/* + * 'usb_tll_hs' class + * usb_tll_hs module is the adapter on the usb_host_hs ports + */ + +static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = { + .name = "usb_tll_hs", + .sysc = &omap44xx_usb_tll_hs_sysc, +}; + +static struct omap_hwmod_irq_info omap44xx_usb_tll_hs_irqs[] = { + { .name = "tll-irq", .irq = 78 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } +}; + +static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = { + .name = "usb_tll_hs", + .class = &omap44xx_usb_tll_hs_hwmod_class, + .clkdm_name = "l3_init_clkdm", + .mpu_irqs = omap44xx_usb_tll_hs_irqs, + .main_clk = "usb_tll_hs_ick", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, }; /* @@ -5218,35 +2792,11 @@ static struct omap_hwmod_class omap44xx_wd_timer_hwmod_class = { }; /* wd_timer2 */ -static struct omap_hwmod omap44xx_wd_timer2_hwmod; static struct omap_hwmod_irq_info omap44xx_wd_timer2_irqs[] = { { .irq = 80 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_wd_timer2_addrs[] = { - { - .pa_start = 0x4a314000, - .pa_end = 0x4a31407f, - .flags = ADDR_TYPE_RT - }, - { } -}; - -/* l4_wkup -> wd_timer2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_wkup__wd_timer2 = { - .master = &omap44xx_l4_wkup_hwmod, - .slave = &omap44xx_wd_timer2_hwmod, - .clk = "l4_wkup_clk_mux_ck", - .addr = omap44xx_wd_timer2_addrs, - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* wd_timer2 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_wd_timer2_slaves[] = { - &omap44xx_l4_wkup__wd_timer2, -}; - static struct omap_hwmod omap44xx_wd_timer2_hwmod = { .name = "wd_timer2", .class = &omap44xx_wd_timer_hwmod_class, @@ -5260,106 +2810,1746 @@ static struct omap_hwmod omap44xx_wd_timer2_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .slaves = omap44xx_wd_timer2_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer2_slaves), }; /* wd_timer3 */ -static struct omap_hwmod omap44xx_wd_timer3_hwmod; static struct omap_hwmod_irq_info omap44xx_wd_timer3_irqs[] = { { .irq = 36 + OMAP44XX_IRQ_GIC_START }, { .irq = -1 } }; -static struct omap_hwmod_addr_space omap44xx_wd_timer3_addrs[] = { +static struct omap_hwmod omap44xx_wd_timer3_hwmod = { + .name = "wd_timer3", + .class = &omap44xx_wd_timer_hwmod_class, + .clkdm_name = "abe_clkdm", + .mpu_irqs = omap44xx_wd_timer3_irqs, + .main_clk = "wd_timer3_fck", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_ABE_WDT3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + + +/* + * interfaces + */ + +/* l3_main_1 -> dmm */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_1__dmm = { + .master = &omap44xx_l3_main_1_hwmod, + .slave = &omap44xx_dmm_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_dmm_addrs[] = { { - .pa_start = 0x40130000, - .pa_end = 0x4013007f, + .pa_start = 0x4e000000, + .pa_end = 0x4e0007ff, .flags = ADDR_TYPE_RT }, { } }; -/* l4_abe -> wd_timer3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3 = { +/* mpu -> dmm */ +static struct omap_hwmod_ocp_if omap44xx_mpu__dmm = { + .master = &omap44xx_mpu_hwmod, + .slave = &omap44xx_dmm_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_dmm_addrs, + .user = OCP_USER_MPU, +}; + +/* dmm -> emif_fw */ +static struct omap_hwmod_ocp_if omap44xx_dmm__emif_fw = { + .master = &omap44xx_dmm_hwmod, + .slave = &omap44xx_emif_fw_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_emif_fw_addrs[] = { + { + .pa_start = 0x4a20c000, + .pa_end = 0x4a20c0ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_cfg -> emif_fw */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__emif_fw = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_emif_fw_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_emif_fw_addrs, + .user = OCP_USER_MPU, +}; + +/* iva -> l3_instr */ +static struct omap_hwmod_ocp_if omap44xx_iva__l3_instr = { + .master = &omap44xx_iva_hwmod, + .slave = &omap44xx_l3_instr_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_3 -> l3_instr */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_3__l3_instr = { + .master = &omap44xx_l3_main_3_hwmod, + .slave = &omap44xx_l3_instr_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dsp -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap44xx_dsp__l3_main_1 = { + .master = &omap44xx_dsp_hwmod, + .slave = &omap44xx_l3_main_1_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dss -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap44xx_dss__l3_main_1 = { + .master = &omap44xx_dss_hwmod, + .slave = &omap44xx_l3_main_1_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_l3_main_1_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_1 = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_l3_main_1_hwmod, + .clk = "l4_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mmc1 -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap44xx_mmc1__l3_main_1 = { + .master = &omap44xx_mmc1_hwmod, + .slave = &omap44xx_l3_main_1_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mmc2 -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap44xx_mmc2__l3_main_1 = { + .master = &omap44xx_mmc2_hwmod, + .slave = &omap44xx_l3_main_1_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_l3_main_1_addrs[] = { + { + .pa_start = 0x44000000, + .pa_end = 0x44000fff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* mpu -> l3_main_1 */ +static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = { + .master = &omap44xx_mpu_hwmod, + .slave = &omap44xx_l3_main_1_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_l3_main_1_addrs, + .user = OCP_USER_MPU, +}; + +/* dma_system -> l3_main_2 */ +static struct omap_hwmod_ocp_if omap44xx_dma_system__l3_main_2 = { + .master = &omap44xx_dma_system_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* hsi -> l3_main_2 */ +static struct omap_hwmod_ocp_if omap44xx_hsi__l3_main_2 = { + .master = &omap44xx_hsi_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* ipu -> l3_main_2 */ +static struct omap_hwmod_ocp_if omap44xx_ipu__l3_main_2 = { + .master = &omap44xx_ipu_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* iss -> l3_main_2 */ +static struct omap_hwmod_ocp_if omap44xx_iss__l3_main_2 = { + .master = &omap44xx_iss_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* iva -> l3_main_2 */ +static struct omap_hwmod_ocp_if omap44xx_iva__l3_main_2 = { + .master = &omap44xx_iva_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_l3_main_2_addrs[] = { + { + .pa_start = 0x44800000, + .pa_end = 0x44801fff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l3_main_1 -> l3_main_2 */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = { + .master = &omap44xx_l3_main_1_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_l3_main_2_addrs, + .user = OCP_USER_MPU, +}; + +/* l4_cfg -> l3_main_2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l4_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* usb_host_hs -> l3_main_2 */ +static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = { + .master = &omap44xx_usb_host_hs_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* usb_otg_hs -> l3_main_2 */ +static struct omap_hwmod_ocp_if omap44xx_usb_otg_hs__l3_main_2 = { + .master = &omap44xx_usb_otg_hs_hwmod, + .slave = &omap44xx_l3_main_2_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_l3_main_3_addrs[] = { + { + .pa_start = 0x45000000, + .pa_end = 0x45000fff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l3_main_1 -> l3_main_3 */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = { + .master = &omap44xx_l3_main_1_hwmod, + .slave = &omap44xx_l3_main_3_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_l3_main_3_addrs, + .user = OCP_USER_MPU, +}; + +/* l3_main_2 -> l3_main_3 */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_3 = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_l3_main_3_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> l3_main_3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_l3_main_3_hwmod, + .clk = "l4_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* aess -> l4_abe */ +static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = { + .master = &omap44xx_aess_hwmod, + .slave = &omap44xx_l4_abe_hwmod, + .clk = "ocp_abe_iclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* dsp -> l4_abe */ +static struct omap_hwmod_ocp_if omap44xx_dsp__l4_abe = { + .master = &omap44xx_dsp_hwmod, + .slave = &omap44xx_l4_abe_hwmod, + .clk = "ocp_abe_iclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_1 -> l4_abe */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_abe = { + .master = &omap44xx_l3_main_1_hwmod, + .slave = &omap44xx_l4_abe_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mpu -> l4_abe */ +static struct omap_hwmod_ocp_if omap44xx_mpu__l4_abe = { + .master = &omap44xx_mpu_hwmod, + .slave = &omap44xx_l4_abe_hwmod, + .clk = "ocp_abe_iclk", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_1 -> l4_cfg */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = { + .master = &omap44xx_l3_main_1_hwmod, + .slave = &omap44xx_l4_cfg_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> l4_per */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l4_per = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_l4_per_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_cfg -> l4_wkup */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l4_wkup = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_l4_wkup_hwmod, + .clk = "l4_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* mpu -> mpu_private */ +static struct omap_hwmod_ocp_if omap44xx_mpu__mpu_private = { + .master = &omap44xx_mpu_hwmod, + .slave = &omap44xx_mpu_private_hwmod, + .clk = "l3_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_aess_addrs[] = { + { + .pa_start = 0x401f1000, + .pa_end = 0x401f13ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> aess */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = { .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_wd_timer3_hwmod, + .slave = &omap44xx_aess_hwmod, .clk = "ocp_abe_iclk", - .addr = omap44xx_wd_timer3_addrs, + .addr = omap44xx_aess_addrs, .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space omap44xx_wd_timer3_dma_addrs[] = { +static struct omap_hwmod_addr_space omap44xx_aess_dma_addrs[] = { { - .pa_start = 0x49030000, - .pa_end = 0x4903007f, + .pa_start = 0x490f1000, + .pa_end = 0x490f13ff, .flags = ADDR_TYPE_RT }, { } }; -/* l4_abe -> wd_timer3 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3_dma = { +/* l4_abe -> aess (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = { .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_wd_timer3_hwmod, + .slave = &omap44xx_aess_hwmod, .clk = "ocp_abe_iclk", - .addr = omap44xx_wd_timer3_dma_addrs, + .addr = omap44xx_aess_dma_addrs, .user = OCP_USER_SDMA, }; -/* wd_timer3 slave ports */ -static struct omap_hwmod_ocp_if *omap44xx_wd_timer3_slaves[] = { - &omap44xx_l4_abe__wd_timer3, - &omap44xx_l4_abe__wd_timer3_dma, +static struct omap_hwmod_addr_space omap44xx_counter_32k_addrs[] = { + { + .pa_start = 0x4a304000, + .pa_end = 0x4a30401f, + .flags = ADDR_TYPE_RT + }, + { } }; -static struct omap_hwmod omap44xx_wd_timer3_hwmod = { - .name = "wd_timer3", - .class = &omap44xx_wd_timer_hwmod_class, - .clkdm_name = "abe_clkdm", - .mpu_irqs = omap44xx_wd_timer3_irqs, - .main_clk = "wd_timer3_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_ABE_WDT3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, +/* l4_wkup -> counter_32k */ +static struct omap_hwmod_ocp_if omap44xx_l4_wkup__counter_32k = { + .master = &omap44xx_l4_wkup_hwmod, + .slave = &omap44xx_counter_32k_hwmod, + .clk = "l4_wkup_clk_mux_ck", + .addr = omap44xx_counter_32k_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = { + { + .pa_start = 0x4a056000, + .pa_end = 0x4a056fff, + .flags = ADDR_TYPE_RT }, - .slaves = omap44xx_wd_timer3_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer3_slaves), + { } }; -/* - * 'usb_host_hs' class - * high-speed multi-port usb host controller - */ -static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = { - .master = &omap44xx_usb_host_hs_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, +/* l4_cfg -> dma_system */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dma_system = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_dma_system_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dma_system_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = { + { + .name = "mpu", + .pa_start = 0x4012e000, + .pa_end = 0x4012e07f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> dmic */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_dmic_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_dmic_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = { + { + .name = "dma", + .pa_start = 0x4902e000, + .pa_end = 0x4902e07f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> dmic (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_dmic_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_dmic_dma_addrs, + .user = OCP_USER_SDMA, +}; + +/* dsp -> iva */ +static struct omap_hwmod_ocp_if omap44xx_dsp__iva = { + .master = &omap44xx_dsp_hwmod, + .slave = &omap44xx_iva_hwmod, + .clk = "dpll_iva_m5x2_ck", + .user = OCP_USER_DSP, +}; + +/* l4_cfg -> dsp */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dsp = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_dsp_hwmod, + .clk = "l4_div_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dma_addrs[] = { + { + .pa_start = 0x58000000, + .pa_end = 0x5800007f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l3_main_2 -> dss */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_hwmod, + .clk = "dss_fck", + .addr = omap44xx_dss_dma_addrs, + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_addrs[] = { + { + .pa_start = 0x48040000, + .pa_end = 0x4804007f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> dss */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dispc_dma_addrs[] = { + { + .pa_start = 0x58001000, + .pa_end = 0x58001fff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l3_main_2 -> dss_dispc */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_dispc_hwmod, + .clk = "dss_fck", + .addr = omap44xx_dss_dispc_dma_addrs, + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dispc_addrs[] = { + { + .pa_start = 0x48041000, + .pa_end = 0x48041fff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> dss_dispc */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_dispc_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_dispc_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dsi1_dma_addrs[] = { + { + .pa_start = 0x58004000, + .pa_end = 0x580041ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l3_main_2 -> dss_dsi1 */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_dsi1_hwmod, + .clk = "dss_fck", + .addr = omap44xx_dss_dsi1_dma_addrs, + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dsi1_addrs[] = { + { + .pa_start = 0x48044000, + .pa_end = 0x480441ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> dss_dsi1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi1 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_dsi1_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_dsi1_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dsi2_dma_addrs[] = { + { + .pa_start = 0x58005000, + .pa_end = 0x580051ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l3_main_2 -> dss_dsi2 */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_dsi2_hwmod, + .clk = "dss_fck", + .addr = omap44xx_dss_dsi2_dma_addrs, + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_dsi2_addrs[] = { + { + .pa_start = 0x48045000, + .pa_end = 0x480451ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> dss_dsi2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi2 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_dsi2_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_dsi2_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_hdmi_dma_addrs[] = { + { + .pa_start = 0x58006000, + .pa_end = 0x58006fff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l3_main_2 -> dss_hdmi */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_hdmi_hwmod, + .clk = "dss_fck", + .addr = omap44xx_dss_hdmi_dma_addrs, + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_hdmi_addrs[] = { + { + .pa_start = 0x48046000, + .pa_end = 0x48046fff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> dss_hdmi */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_hdmi = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_hdmi_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_hdmi_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_rfbi_dma_addrs[] = { + { + .pa_start = 0x58002000, + .pa_end = 0x580020ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l3_main_2 -> dss_rfbi */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_rfbi_hwmod, + .clk = "dss_fck", + .addr = omap44xx_dss_rfbi_dma_addrs, + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_rfbi_addrs[] = { + { + .pa_start = 0x48042000, + .pa_end = 0x480420ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> dss_rfbi */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_rfbi = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_rfbi_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_rfbi_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_venc_dma_addrs[] = { + { + .pa_start = 0x58003000, + .pa_end = 0x580030ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l3_main_2 -> dss_venc */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_dss_venc_hwmod, + .clk = "dss_fck", + .addr = omap44xx_dss_venc_dma_addrs, + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_dss_venc_addrs[] = { + { + .pa_start = 0x48043000, + .pa_end = 0x480430ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> dss_venc */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_dss_venc_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_dss_venc_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_gpio1_addrs[] = { + { + .pa_start = 0x4a310000, + .pa_end = 0x4a3101ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_wkup -> gpio1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_wkup__gpio1 = { + .master = &omap44xx_l4_wkup_hwmod, + .slave = &omap44xx_gpio1_hwmod, + .clk = "l4_wkup_clk_mux_ck", + .addr = omap44xx_gpio1_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_gpio2_addrs[] = { + { + .pa_start = 0x48055000, + .pa_end = 0x480551ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> gpio2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio2 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_gpio2_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_gpio2_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_gpio3_addrs[] = { + { + .pa_start = 0x48057000, + .pa_end = 0x480571ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> gpio3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio3 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_gpio3_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_gpio3_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_gpio4_addrs[] = { + { + .pa_start = 0x48059000, + .pa_end = 0x480591ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> gpio4 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio4 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_gpio4_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_gpio4_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_gpio5_addrs[] = { + { + .pa_start = 0x4805b000, + .pa_end = 0x4805b1ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> gpio5 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio5 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_gpio5_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_gpio5_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_gpio6_addrs[] = { + { + .pa_start = 0x4805d000, + .pa_end = 0x4805d1ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> gpio6 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio6 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_gpio6_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_gpio6_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_hsi_addrs[] = { + { + .pa_start = 0x4a058000, + .pa_end = 0x4a05bfff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_cfg -> hsi */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__hsi = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_hsi_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_hsi_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_i2c1_addrs[] = { + { + .pa_start = 0x48070000, + .pa_end = 0x480700ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> i2c1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c1 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_i2c1_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_i2c1_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_i2c2_addrs[] = { + { + .pa_start = 0x48072000, + .pa_end = 0x480720ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> i2c2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c2 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_i2c2_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_i2c2_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_i2c3_addrs[] = { + { + .pa_start = 0x48060000, + .pa_end = 0x480600ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> i2c3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c3 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_i2c3_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_i2c3_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_i2c4_addrs[] = { + { + .pa_start = 0x48350000, + .pa_end = 0x483500ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> i2c4 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c4 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_i2c4_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_i2c4_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> ipu */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ipu = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_ipu_hwmod, .clk = "l3_div_ck", .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, +static struct omap_hwmod_addr_space omap44xx_iss_addrs[] = { + { + .pa_start = 0x52000000, + .pa_end = 0x520000ff, + .flags = ADDR_TYPE_RT + }, + { } }; -static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = { - .name = "usb_host_hs", - .sysc = &omap44xx_usb_host_hs_sysc, +/* l3_main_2 -> iss */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_iss_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_iss_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_masters[] = { - &omap44xx_usb_host_hs__l3_main_2, +static struct omap_hwmod_addr_space omap44xx_iva_addrs[] = { + { + .pa_start = 0x5a000000, + .pa_end = 0x5a07ffff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l3_main_2 -> iva */ +static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iva = { + .master = &omap44xx_l3_main_2_hwmod, + .slave = &omap44xx_iva_hwmod, + .clk = "l3_div_ck", + .addr = omap44xx_iva_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_kbd_addrs[] = { + { + .pa_start = 0x4a31c000, + .pa_end = 0x4a31c07f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_wkup -> kbd */ +static struct omap_hwmod_ocp_if omap44xx_l4_wkup__kbd = { + .master = &omap44xx_l4_wkup_hwmod, + .slave = &omap44xx_kbd_hwmod, + .clk = "l4_wkup_clk_mux_ck", + .addr = omap44xx_kbd_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_mailbox_addrs[] = { + { + .pa_start = 0x4a0f4000, + .pa_end = 0x4a0f41ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_cfg -> mailbox */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mailbox = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_mailbox_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mailbox_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_mcbsp1_addrs[] = { + { + .name = "mpu", + .pa_start = 0x40122000, + .pa_end = 0x401220ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> mcbsp1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1 = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_mcbsp1_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_mcbsp1_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_mcbsp1_dma_addrs[] = { + { + .name = "dma", + .pa_start = 0x49022000, + .pa_end = 0x490220ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> mcbsp1 (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_mcbsp1_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_mcbsp1_dma_addrs, + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_mcbsp2_addrs[] = { + { + .name = "mpu", + .pa_start = 0x40124000, + .pa_end = 0x401240ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> mcbsp2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2 = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_mcbsp2_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_mcbsp2_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_mcbsp2_dma_addrs[] = { + { + .name = "dma", + .pa_start = 0x49024000, + .pa_end = 0x490240ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> mcbsp2 (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_mcbsp2_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_mcbsp2_dma_addrs, + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_mcbsp3_addrs[] = { + { + .name = "mpu", + .pa_start = 0x40126000, + .pa_end = 0x401260ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> mcbsp3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3 = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_mcbsp3_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_mcbsp3_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_mcbsp3_dma_addrs[] = { + { + .name = "dma", + .pa_start = 0x49026000, + .pa_end = 0x490260ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> mcbsp3 (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_mcbsp3_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_mcbsp3_dma_addrs, + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_mcbsp4_addrs[] = { + { + .pa_start = 0x48096000, + .pa_end = 0x480960ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> mcbsp4 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mcbsp4 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mcbsp4_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mcbsp4_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_mcpdm_addrs[] = { + { + .pa_start = 0x40132000, + .pa_end = 0x4013207f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> mcpdm */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_mcpdm_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_mcpdm_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_mcpdm_dma_addrs[] = { + { + .pa_start = 0x49032000, + .pa_end = 0x4903207f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> mcpdm (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_mcpdm_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_mcpdm_dma_addrs, + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_mcspi1_addrs[] = { + { + .pa_start = 0x48098000, + .pa_end = 0x480981ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> mcspi1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi1 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mcspi1_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mcspi1_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_mcspi2_addrs[] = { + { + .pa_start = 0x4809a000, + .pa_end = 0x4809a1ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> mcspi2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi2 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mcspi2_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mcspi2_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_mcspi3_addrs[] = { + { + .pa_start = 0x480b8000, + .pa_end = 0x480b81ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> mcspi3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi3 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mcspi3_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mcspi3_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_mcspi4_addrs[] = { + { + .pa_start = 0x480ba000, + .pa_end = 0x480ba1ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> mcspi4 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi4 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mcspi4_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mcspi4_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_mmc1_addrs[] = { + { + .pa_start = 0x4809c000, + .pa_end = 0x4809c3ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> mmc1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc1 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mmc1_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mmc1_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_mmc2_addrs[] = { + { + .pa_start = 0x480b4000, + .pa_end = 0x480b43ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> mmc2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc2 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mmc2_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mmc2_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_mmc3_addrs[] = { + { + .pa_start = 0x480ad000, + .pa_end = 0x480ad3ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> mmc3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc3 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mmc3_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mmc3_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_mmc4_addrs[] = { + { + .pa_start = 0x480d1000, + .pa_end = 0x480d13ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> mmc4 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc4 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mmc4_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mmc4_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_mmc5_addrs[] = { + { + .pa_start = 0x480d5000, + .pa_end = 0x480d53ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> mmc5 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc5 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_mmc5_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_mmc5_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_smartreflex_core_addrs[] = { + { + .pa_start = 0x4a0dd000, + .pa_end = 0x4a0dd03f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_cfg -> smartreflex_core */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_core = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_smartreflex_core_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_smartreflex_core_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_smartreflex_iva_addrs[] = { + { + .pa_start = 0x4a0db000, + .pa_end = 0x4a0db03f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_cfg -> smartreflex_iva */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_iva = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_smartreflex_iva_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_smartreflex_iva_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_smartreflex_mpu_addrs[] = { + { + .pa_start = 0x4a0d9000, + .pa_end = 0x4a0d903f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_cfg -> smartreflex_mpu */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_mpu = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_smartreflex_mpu_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_smartreflex_mpu_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_spinlock_addrs[] = { + { + .pa_start = 0x4a0f6000, + .pa_end = 0x4a0f6fff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_cfg -> spinlock */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__spinlock = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_spinlock_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_spinlock_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_timer1_addrs[] = { + { + .pa_start = 0x4a318000, + .pa_end = 0x4a31807f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_wkup -> timer1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_wkup__timer1 = { + .master = &omap44xx_l4_wkup_hwmod, + .slave = &omap44xx_timer1_hwmod, + .clk = "l4_wkup_clk_mux_ck", + .addr = omap44xx_timer1_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_timer2_addrs[] = { + { + .pa_start = 0x48032000, + .pa_end = 0x4803207f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> timer2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__timer2 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_timer2_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_timer2_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_timer3_addrs[] = { + { + .pa_start = 0x48034000, + .pa_end = 0x4803407f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> timer3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__timer3 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_timer3_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_timer3_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_timer4_addrs[] = { + { + .pa_start = 0x48036000, + .pa_end = 0x4803607f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> timer4 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__timer4 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_timer4_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_timer4_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_timer5_addrs[] = { + { + .pa_start = 0x40138000, + .pa_end = 0x4013807f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> timer5 */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5 = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_timer5_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_timer5_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_timer5_dma_addrs[] = { + { + .pa_start = 0x49038000, + .pa_end = 0x4903807f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> timer5 (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_timer5_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_timer5_dma_addrs, + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_timer6_addrs[] = { + { + .pa_start = 0x4013a000, + .pa_end = 0x4013a07f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> timer6 */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6 = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_timer6_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_timer6_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_timer6_dma_addrs[] = { + { + .pa_start = 0x4903a000, + .pa_end = 0x4903a07f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> timer6 (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_timer6_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_timer6_dma_addrs, + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_timer7_addrs[] = { + { + .pa_start = 0x4013c000, + .pa_end = 0x4013c07f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> timer7 */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7 = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_timer7_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_timer7_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_timer7_dma_addrs[] = { + { + .pa_start = 0x4903c000, + .pa_end = 0x4903c07f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> timer7 (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_timer7_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_timer7_dma_addrs, + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_timer8_addrs[] = { + { + .pa_start = 0x4013e000, + .pa_end = 0x4013e07f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> timer8 */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8 = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_timer8_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_timer8_addrs, + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod_addr_space omap44xx_timer8_dma_addrs[] = { + { + .pa_start = 0x4903e000, + .pa_end = 0x4903e07f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> timer8 (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_timer8_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_timer8_dma_addrs, + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_timer9_addrs[] = { + { + .pa_start = 0x4803e000, + .pa_end = 0x4803e07f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> timer9 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__timer9 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_timer9_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_timer9_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_timer10_addrs[] = { + { + .pa_start = 0x48086000, + .pa_end = 0x4808607f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> timer10 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__timer10 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_timer10_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_timer10_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_timer11_addrs[] = { + { + .pa_start = 0x48088000, + .pa_end = 0x4808807f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> timer11 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__timer11 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_timer11_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_timer11_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_uart1_addrs[] = { + { + .pa_start = 0x4806a000, + .pa_end = 0x4806a0ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> uart1 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__uart1 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_uart1_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_uart1_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_uart2_addrs[] = { + { + .pa_start = 0x4806c000, + .pa_end = 0x4806c0ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> uart2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__uart2 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_uart2_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_uart2_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_uart3_addrs[] = { + { + .pa_start = 0x48020000, + .pa_end = 0x480200ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> uart3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__uart3 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_uart3_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_uart3_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_uart4_addrs[] = { + { + .pa_start = 0x4806e000, + .pa_end = 0x4806e0ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_per -> uart4 */ +static struct omap_hwmod_ocp_if omap44xx_l4_per__uart4 = { + .master = &omap44xx_l4_per_hwmod, + .slave = &omap44xx_uart4_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_uart4_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; static struct omap_hwmod_addr_space omap44xx_usb_host_hs_addrs[] = { @@ -5382,12 +4572,7 @@ static struct omap_hwmod_addr_space omap44xx_usb_host_hs_addrs[] = { {} }; -static struct omap_hwmod_irq_info omap44xx_usb_host_hs_irqs[] = { - { .name = "ohci-irq", .irq = 76 + OMAP44XX_IRQ_GIC_START }, - { .name = "ehci-irq", .irq = 77 + OMAP44XX_IRQ_GIC_START }, - { .irq = -1 } -}; - +/* l4_cfg -> usb_host_hs */ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = { .master = &omap44xx_l4_cfg_hwmod, .slave = &omap44xx_usb_host_hs_hwmod, @@ -5396,100 +4581,22 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_slaves[] = { - &omap44xx_l4_cfg__usb_host_hs, -}; - -static struct omap_hwmod omap44xx_usb_host_hs_hwmod = { - .name = "usb_host_hs", - .class = &omap44xx_usb_host_hs_hwmod_class, - .clkdm_name = "l3_init_clkdm", - .main_clk = "usb_host_hs_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, +static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = { + { + .pa_start = 0x4a0ab000, + .pa_end = 0x4a0ab003, + .flags = ADDR_TYPE_RT }, - .mpu_irqs = omap44xx_usb_host_hs_irqs, - .slaves = omap44xx_usb_host_hs_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_usb_host_hs_slaves), - .masters = omap44xx_usb_host_hs_masters, - .masters_cnt = ARRAY_SIZE(omap44xx_usb_host_hs_masters), - - /* - * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock - * id: i660 - * - * Description: - * In the following configuration : - * - USBHOST module is set to smart-idle mode - * - PRCM asserts idle_req to the USBHOST module ( This typically - * happens when the system is going to a low power mode : all ports - * have been suspended, the master part of the USBHOST module has - * entered the standby state, and SW has cut the functional clocks) - * - an USBHOST interrupt occurs before the module is able to answer - * idle_ack, typically a remote wakeup IRQ. - * Then the USB HOST module will enter a deadlock situation where it - * is no more accessible nor functional. - * - * Workaround: - * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE - */ - - /* - * Errata: USB host EHCI may stall when entering smart-standby mode - * Id: i571 - * - * Description: - * When the USBHOST module is set to smart-standby mode, and when it is - * ready to enter the standby state (i.e. all ports are suspended and - * all attached devices are in suspend mode), then it can wrongly assert - * the Mstandby signal too early while there are still some residual OCP - * transactions ongoing. If this condition occurs, the internal state - * machine may go to an undefined state and the USB link may be stuck - * upon the next resume. - * - * Workaround: - * Don't use smart standby; use only force standby, - * hence HWMOD_SWSUP_MSTANDBY - */ - - /* - * During system boot; If the hwmod framework resets the module - * the module will have smart idle settings; which can lead to deadlock - * (above Errata Id:i660); so, dont reset the module during boot; - * Use HWMOD_INIT_NO_RESET. - */ - - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY | - HWMOD_INIT_NO_RESET, -}; - -/* - * 'usb_tll_hs' class - * usb_tll_hs module is the adapter on the usb_host_hs ports - */ -static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = { - .name = "usb_tll_hs", - .sysc = &omap44xx_usb_tll_hs_sysc, + { } }; -static struct omap_hwmod_irq_info omap44xx_usb_tll_hs_irqs[] = { - { .name = "tll-irq", .irq = 78 + OMAP44XX_IRQ_GIC_START }, - { .irq = -1 } +/* l4_cfg -> usb_otg_hs */ +static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_otg_hs = { + .master = &omap44xx_l4_cfg_hwmod, + .slave = &omap44xx_usb_otg_hs_hwmod, + .clk = "l4_div_ck", + .addr = omap44xx_usb_otg_hs_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; static struct omap_hwmod_addr_space omap44xx_usb_tll_hs_addrs[] = { @@ -5502,6 +4609,7 @@ static struct omap_hwmod_addr_space omap44xx_usb_tll_hs_addrs[] = { {} }; +/* l4_cfg -> usb_tll_hs */ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = { .master = &omap44xx_l4_cfg_hwmod, .slave = &omap44xx_usb_tll_hs_hwmod, @@ -5510,181 +4618,184 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_ocp_if *omap44xx_usb_tll_hs_slaves[] = { - &omap44xx_l4_cfg__usb_tll_hs, +static struct omap_hwmod_addr_space omap44xx_wd_timer2_addrs[] = { + { + .pa_start = 0x4a314000, + .pa_end = 0x4a31407f, + .flags = ADDR_TYPE_RT + }, + { } }; -static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = { - .name = "usb_tll_hs", - .class = &omap44xx_usb_tll_hs_hwmod_class, - .clkdm_name = "l3_init_clkdm", - .main_clk = "usb_tll_hs_ick", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, +/* l4_wkup -> wd_timer2 */ +static struct omap_hwmod_ocp_if omap44xx_l4_wkup__wd_timer2 = { + .master = &omap44xx_l4_wkup_hwmod, + .slave = &omap44xx_wd_timer2_hwmod, + .clk = "l4_wkup_clk_mux_ck", + .addr = omap44xx_wd_timer2_addrs, + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_addr_space omap44xx_wd_timer3_addrs[] = { + { + .pa_start = 0x40130000, + .pa_end = 0x4013007f, + .flags = ADDR_TYPE_RT }, - .mpu_irqs = omap44xx_usb_tll_hs_irqs, - .slaves = omap44xx_usb_tll_hs_slaves, - .slaves_cnt = ARRAY_SIZE(omap44xx_usb_tll_hs_slaves), + { } +}; + +/* l4_abe -> wd_timer3 */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3 = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_wd_timer3_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_wd_timer3_addrs, + .user = OCP_USER_MPU, }; -static __initdata struct omap_hwmod *omap44xx_hwmods[] = { - - /* dmm class */ - &omap44xx_dmm_hwmod, - - /* emif_fw class */ - &omap44xx_emif_fw_hwmod, - - /* l3 class */ - &omap44xx_l3_instr_hwmod, - &omap44xx_l3_main_1_hwmod, - &omap44xx_l3_main_2_hwmod, - &omap44xx_l3_main_3_hwmod, - - /* l4 class */ - &omap44xx_l4_abe_hwmod, - &omap44xx_l4_cfg_hwmod, - &omap44xx_l4_per_hwmod, - &omap44xx_l4_wkup_hwmod, - - /* mpu_bus class */ - &omap44xx_mpu_private_hwmod, - - /* aess class */ -/* &omap44xx_aess_hwmod, */ - - /* bandgap class */ - &omap44xx_bandgap_hwmod, - - /* counter class */ -/* &omap44xx_counter_32k_hwmod, */ - - /* dma class */ - &omap44xx_dma_system_hwmod, - - /* dmic class */ - &omap44xx_dmic_hwmod, - - /* dsp class */ - &omap44xx_dsp_hwmod, - &omap44xx_dsp_c0_hwmod, - - /* dss class */ - &omap44xx_dss_hwmod, - &omap44xx_dss_dispc_hwmod, - &omap44xx_dss_dsi1_hwmod, - &omap44xx_dss_dsi2_hwmod, - &omap44xx_dss_hdmi_hwmod, - &omap44xx_dss_rfbi_hwmod, - &omap44xx_dss_venc_hwmod, - - /* gpio class */ - &omap44xx_gpio1_hwmod, - &omap44xx_gpio2_hwmod, - &omap44xx_gpio3_hwmod, - &omap44xx_gpio4_hwmod, - &omap44xx_gpio5_hwmod, - &omap44xx_gpio6_hwmod, - - /* hsi class */ -/* &omap44xx_hsi_hwmod, */ - - /* i2c class */ - &omap44xx_i2c1_hwmod, - &omap44xx_i2c2_hwmod, - &omap44xx_i2c3_hwmod, - &omap44xx_i2c4_hwmod, - - /* ipu class */ - &omap44xx_ipu_hwmod, - &omap44xx_ipu_c0_hwmod, - &omap44xx_ipu_c1_hwmod, - - /* iss class */ -/* &omap44xx_iss_hwmod, */ - - /* iva class */ - &omap44xx_iva_hwmod, - &omap44xx_iva_seq0_hwmod, - &omap44xx_iva_seq1_hwmod, - - /* kbd class */ - &omap44xx_kbd_hwmod, - - /* mailbox class */ - &omap44xx_mailbox_hwmod, - - /* mcbsp class */ - &omap44xx_mcbsp1_hwmod, - &omap44xx_mcbsp2_hwmod, - &omap44xx_mcbsp3_hwmod, - &omap44xx_mcbsp4_hwmod, - - /* mcpdm class */ - &omap44xx_mcpdm_hwmod, - - /* mcspi class */ - &omap44xx_mcspi1_hwmod, - &omap44xx_mcspi2_hwmod, - &omap44xx_mcspi3_hwmod, - &omap44xx_mcspi4_hwmod, - - /* mmc class */ - &omap44xx_mmc1_hwmod, - &omap44xx_mmc2_hwmod, - &omap44xx_mmc3_hwmod, - &omap44xx_mmc4_hwmod, - &omap44xx_mmc5_hwmod, - - /* mpu class */ - &omap44xx_mpu_hwmod, - - /* smartreflex class */ - &omap44xx_smartreflex_core_hwmod, - &omap44xx_smartreflex_iva_hwmod, - &omap44xx_smartreflex_mpu_hwmod, - - /* spinlock class */ - &omap44xx_spinlock_hwmod, - - /* timer class */ - &omap44xx_timer1_hwmod, - &omap44xx_timer2_hwmod, - &omap44xx_timer3_hwmod, - &omap44xx_timer4_hwmod, - &omap44xx_timer5_hwmod, - &omap44xx_timer6_hwmod, - &omap44xx_timer7_hwmod, - &omap44xx_timer8_hwmod, - &omap44xx_timer9_hwmod, - &omap44xx_timer10_hwmod, - &omap44xx_timer11_hwmod, - - /* uart class */ - &omap44xx_uart1_hwmod, - &omap44xx_uart2_hwmod, - &omap44xx_uart3_hwmod, - &omap44xx_uart4_hwmod, - - /* usb host class */ - &omap44xx_usb_host_hs_hwmod, - &omap44xx_usb_tll_hs_hwmod, - - /* usb_otg_hs class */ - &omap44xx_usb_otg_hs_hwmod, - - /* wd_timer class */ - &omap44xx_wd_timer2_hwmod, - &omap44xx_wd_timer3_hwmod, +static struct omap_hwmod_addr_space omap44xx_wd_timer3_dma_addrs[] = { + { + .pa_start = 0x49030000, + .pa_end = 0x4903007f, + .flags = ADDR_TYPE_RT + }, + { } +}; + +/* l4_abe -> wd_timer3 (dma) */ +static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3_dma = { + .master = &omap44xx_l4_abe_hwmod, + .slave = &omap44xx_wd_timer3_hwmod, + .clk = "ocp_abe_iclk", + .addr = omap44xx_wd_timer3_dma_addrs, + .user = OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { + &omap44xx_l3_main_1__dmm, + &omap44xx_mpu__dmm, + &omap44xx_dmm__emif_fw, + &omap44xx_l4_cfg__emif_fw, + &omap44xx_iva__l3_instr, + &omap44xx_l3_main_3__l3_instr, + &omap44xx_dsp__l3_main_1, + &omap44xx_dss__l3_main_1, + &omap44xx_l3_main_2__l3_main_1, + &omap44xx_l4_cfg__l3_main_1, + &omap44xx_mmc1__l3_main_1, + &omap44xx_mmc2__l3_main_1, + &omap44xx_mpu__l3_main_1, + &omap44xx_dma_system__l3_main_2, + &omap44xx_hsi__l3_main_2, + &omap44xx_ipu__l3_main_2, + &omap44xx_iss__l3_main_2, + &omap44xx_iva__l3_main_2, + &omap44xx_l3_main_1__l3_main_2, + &omap44xx_l4_cfg__l3_main_2, + &omap44xx_usb_host_hs__l3_main_2, + &omap44xx_usb_otg_hs__l3_main_2, + &omap44xx_l3_main_1__l3_main_3, + &omap44xx_l3_main_2__l3_main_3, + &omap44xx_l4_cfg__l3_main_3, + &omap44xx_aess__l4_abe, + &omap44xx_dsp__l4_abe, + &omap44xx_l3_main_1__l4_abe, + &omap44xx_mpu__l4_abe, + &omap44xx_l3_main_1__l4_cfg, + &omap44xx_l3_main_2__l4_per, + &omap44xx_l4_cfg__l4_wkup, + &omap44xx_mpu__mpu_private, + &omap44xx_l4_abe__aess, + &omap44xx_l4_abe__aess_dma, + &omap44xx_l4_wkup__counter_32k, + &omap44xx_l4_cfg__dma_system, + &omap44xx_l4_abe__dmic, + &omap44xx_l4_abe__dmic_dma, + &omap44xx_dsp__iva, + &omap44xx_l4_cfg__dsp, + &omap44xx_l3_main_2__dss, + &omap44xx_l4_per__dss, + &omap44xx_l3_main_2__dss_dispc, + &omap44xx_l4_per__dss_dispc, + &omap44xx_l3_main_2__dss_dsi1, + &omap44xx_l4_per__dss_dsi1, + &omap44xx_l3_main_2__dss_dsi2, + &omap44xx_l4_per__dss_dsi2, + &omap44xx_l3_main_2__dss_hdmi, + &omap44xx_l4_per__dss_hdmi, + &omap44xx_l3_main_2__dss_rfbi, + &omap44xx_l4_per__dss_rfbi, + &omap44xx_l3_main_2__dss_venc, + &omap44xx_l4_per__dss_venc, + &omap44xx_l4_wkup__gpio1, + &omap44xx_l4_per__gpio2, + &omap44xx_l4_per__gpio3, + &omap44xx_l4_per__gpio4, + &omap44xx_l4_per__gpio5, + &omap44xx_l4_per__gpio6, + &omap44xx_l4_cfg__hsi, + &omap44xx_l4_per__i2c1, + &omap44xx_l4_per__i2c2, + &omap44xx_l4_per__i2c3, + &omap44xx_l4_per__i2c4, + &omap44xx_l3_main_2__ipu, + &omap44xx_l3_main_2__iss, + &omap44xx_l3_main_2__iva, + &omap44xx_l4_wkup__kbd, + &omap44xx_l4_cfg__mailbox, + &omap44xx_l4_abe__mcbsp1, + &omap44xx_l4_abe__mcbsp1_dma, + &omap44xx_l4_abe__mcbsp2, + &omap44xx_l4_abe__mcbsp2_dma, + &omap44xx_l4_abe__mcbsp3, + &omap44xx_l4_abe__mcbsp3_dma, + &omap44xx_l4_per__mcbsp4, + &omap44xx_l4_abe__mcpdm, + &omap44xx_l4_abe__mcpdm_dma, + &omap44xx_l4_per__mcspi1, + &omap44xx_l4_per__mcspi2, + &omap44xx_l4_per__mcspi3, + &omap44xx_l4_per__mcspi4, + &omap44xx_l4_per__mmc1, + &omap44xx_l4_per__mmc2, + &omap44xx_l4_per__mmc3, + &omap44xx_l4_per__mmc4, + &omap44xx_l4_per__mmc5, + &omap44xx_l4_cfg__smartreflex_core, + &omap44xx_l4_cfg__smartreflex_iva, + &omap44xx_l4_cfg__smartreflex_mpu, + &omap44xx_l4_cfg__spinlock, + &omap44xx_l4_wkup__timer1, + &omap44xx_l4_per__timer2, + &omap44xx_l4_per__timer3, + &omap44xx_l4_per__timer4, + &omap44xx_l4_abe__timer5, + &omap44xx_l4_abe__timer5_dma, + &omap44xx_l4_abe__timer6, + &omap44xx_l4_abe__timer6_dma, + &omap44xx_l4_abe__timer7, + &omap44xx_l4_abe__timer7_dma, + &omap44xx_l4_abe__timer8, + &omap44xx_l4_abe__timer8_dma, + &omap44xx_l4_per__timer9, + &omap44xx_l4_per__timer10, + &omap44xx_l4_per__timer11, + &omap44xx_l4_per__uart1, + &omap44xx_l4_per__uart2, + &omap44xx_l4_per__uart3, + &omap44xx_l4_per__uart4, + &omap44xx_l4_cfg__usb_host_hs, + &omap44xx_l4_cfg__usb_otg_hs, + &omap44xx_l4_cfg__usb_tll_hs, + &omap44xx_l4_wkup__wd_timer2, + &omap44xx_l4_abe__wd_timer3, + &omap44xx_l4_abe__wd_timer3_dma, NULL, }; int __init omap44xx_hwmod_init(void) { - return omap_hwmod_register(omap44xx_hwmods); + return omap_hwmod_register_links(omap44xx_hwmod_ocp_ifs); } diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index ad5d8f04c0b8..7aa9156d50ab 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -19,18 +19,6 @@ #include "display.h" /* Common address space across OMAP2xxx */ -extern struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[]; -extern struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[]; -extern struct omap_hwmod_addr_space omap2xxx_uart3_addr_space[]; -extern struct omap_hwmod_addr_space omap2xxx_timer2_addrs[]; -extern struct omap_hwmod_addr_space omap2xxx_timer3_addrs[]; -extern struct omap_hwmod_addr_space omap2xxx_timer4_addrs[]; -extern struct omap_hwmod_addr_space omap2xxx_timer5_addrs[]; -extern struct omap_hwmod_addr_space omap2xxx_timer6_addrs[]; -extern struct omap_hwmod_addr_space omap2xxx_timer7_addrs[]; -extern struct omap_hwmod_addr_space omap2xxx_timer8_addrs[]; -extern struct omap_hwmod_addr_space omap2xxx_timer9_addrs[]; -extern struct omap_hwmod_addr_space omap2xxx_timer12_addrs[]; extern struct omap_hwmod_addr_space omap2xxx_mcbsp2_addrs[]; /* Common address space across OMAP2xxx/3xxx */ @@ -54,6 +42,64 @@ extern struct omap_hwmod_addr_space omap2_mcbsp1_addrs[]; /* Common IP block data across OMAP2xxx */ extern struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[]; extern struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[]; +extern struct omap_gpio_dev_attr omap2xxx_gpio_dev_attr; +extern struct omap_hwmod omap2xxx_l3_main_hwmod; +extern struct omap_hwmod omap2xxx_l4_core_hwmod; +extern struct omap_hwmod omap2xxx_l4_wkup_hwmod; +extern struct omap_hwmod omap2xxx_mpu_hwmod; +extern struct omap_hwmod omap2xxx_iva_hwmod; +extern struct omap_hwmod omap2xxx_timer1_hwmod; +extern struct omap_hwmod omap2xxx_timer2_hwmod; +extern struct omap_hwmod omap2xxx_timer3_hwmod; +extern struct omap_hwmod omap2xxx_timer4_hwmod; +extern struct omap_hwmod omap2xxx_timer5_hwmod; +extern struct omap_hwmod omap2xxx_timer6_hwmod; +extern struct omap_hwmod omap2xxx_timer7_hwmod; +extern struct omap_hwmod omap2xxx_timer8_hwmod; +extern struct omap_hwmod omap2xxx_timer9_hwmod; +extern struct omap_hwmod omap2xxx_timer10_hwmod; +extern struct omap_hwmod omap2xxx_timer11_hwmod; +extern struct omap_hwmod omap2xxx_timer12_hwmod; +extern struct omap_hwmod omap2xxx_wd_timer2_hwmod; +extern struct omap_hwmod omap2xxx_uart1_hwmod; +extern struct omap_hwmod omap2xxx_uart2_hwmod; +extern struct omap_hwmod omap2xxx_uart3_hwmod; +extern struct omap_hwmod omap2xxx_dss_core_hwmod; +extern struct omap_hwmod omap2xxx_dss_dispc_hwmod; +extern struct omap_hwmod omap2xxx_dss_rfbi_hwmod; +extern struct omap_hwmod omap2xxx_dss_venc_hwmod; +extern struct omap_hwmod omap2xxx_gpio1_hwmod; +extern struct omap_hwmod omap2xxx_gpio2_hwmod; +extern struct omap_hwmod omap2xxx_gpio3_hwmod; +extern struct omap_hwmod omap2xxx_gpio4_hwmod; +extern struct omap_hwmod omap2xxx_mcspi1_hwmod; +extern struct omap_hwmod omap2xxx_mcspi2_hwmod; + +/* Common interface data across OMAP2xxx */ +extern struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core; +extern struct omap_hwmod_ocp_if omap2xxx_mpu__l3_main; +extern struct omap_hwmod_ocp_if omap2xxx_dss__l3; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__l4_wkup; +extern struct omap_hwmod_ocp_if omap2_l4_core__uart1; +extern struct omap_hwmod_ocp_if omap2_l4_core__uart2; +extern struct omap_hwmod_ocp_if omap2_l4_core__uart3; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi1; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi2; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer2; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer3; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer4; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer5; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer6; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer7; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer8; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer9; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer10; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer11; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer12; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi; +extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc; /* Common IP block data */ extern struct omap_hwmod_dma_info omap2_uart1_sdma_reqs[]; @@ -94,6 +140,7 @@ extern struct omap_hwmod_irq_info omap2_gpio4_irqs[]; extern struct omap_hwmod_irq_info omap2_dma_system_irqs[]; extern struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[]; extern struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[]; +extern struct omap_hwmod_addr_space omap2xxx_timer12_addrs[]; /* OMAP hwmod classes - forward declarations */ extern struct omap_hwmod_class l3_hwmod_class; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 36fa90b6ece8..78564895e914 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -38,27 +38,6 @@ static inline int omap4_opp_init(void) } #endif -/* - * cpuidle mach specific parameters - * - * The board code can override the default C-states definition using - * omap3_pm_init_cpuidle - */ -struct cpuidle_params { - u32 exit_latency; /* exit_latency = sleep + wake-up latencies */ - u32 target_residency; - u8 valid; /* validates the C-state */ -}; - -#if defined(CONFIG_PM) && defined(CONFIG_CPU_IDLE) -extern void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params); -#else -static -inline void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params) -{ -} -#endif - extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm); extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state); diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 95442b69ae27..facfffca9eac 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -171,8 +171,6 @@ static int omap2_allow_mpu_retention(void) static void omap2_enter_mpu_retention(void) { - int only_idle = 0; - /* Putting MPU into the WFI state while a transfer is active * seems to cause the I2C block to timeout. Why? Good question. */ if (omap2_i2c_active()) @@ -195,7 +193,6 @@ static void omap2_enter_mpu_retention(void) omap2_prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD, OMAP2_PM_PWSTCTRL); - only_idle = 1; } omap2_sram_idle(); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 703bd1099259..8b43aefba0ea 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -273,7 +273,7 @@ void omap_sram_idle(void) int per_next_state = PWRDM_POWER_ON; int core_next_state = PWRDM_POWER_ON; int per_going_off; - int core_prev_state, per_prev_state; + int core_prev_state; u32 sdrc_pwr = 0; mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); @@ -375,10 +375,8 @@ void omap_sram_idle(void) pwrdm_post_transition(); /* PER */ - if (per_next_state < PWRDM_POWER_ON) { - per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm); + if (per_next_state < PWRDM_POWER_ON) omap2_gpio_resume_after_idle(); - } /* Disable IO-PAD and IO-CHAIN wakeup */ if (omap3_has_io_wakeup() && @@ -702,7 +700,7 @@ static void __init pm_errata_configure(void) static int __init omap3_pm_init(void) { struct power_state *pwrst, *tmp; - struct clockdomain *neon_clkdm, *per_clkdm, *mpu_clkdm, *core_clkdm; + struct clockdomain *neon_clkdm, *mpu_clkdm; int ret; if (!cpu_is_omap34xx()) @@ -757,8 +755,6 @@ static int __init omap3_pm_init(void) neon_clkdm = clkdm_lookup("neon_clkdm"); mpu_clkdm = clkdm_lookup("mpu_clkdm"); - per_clkdm = clkdm_lookup("per_clkdm"); - core_clkdm = clkdm_lookup("core_clkdm"); #ifdef CONFIG_SUSPEND omap_pm_suspend = omap3_pm_suspend; diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index d28f848897d6..dfe00ddb5c60 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -237,7 +237,7 @@ void omap_prcm_irq_complete(void) */ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) { - int nr_regs = irq_setup->nr_regs; + int nr_regs; u32 mask[OMAP_PRCM_MAX_NR_PENDING_REG]; int offset, i; struct irq_chip_generic *gc; @@ -246,6 +246,8 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) if (!irq_setup) return -EINVAL; + nr_regs = irq_setup->nr_regs; + if (prcm_irq_setup) { pr_err("PRCM: already initialized; won't reinitialize\n"); return -EINVAL; diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 9fc2f44188cb..678dd1d612e5 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -133,7 +133,7 @@ static void omap_serial_fill_default_pads(struct omap_board_data *bdata) static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {} #endif -char *cmdline_find_option(char *str) +static char *cmdline_find_option(char *str) { extern char *saved_command_line; diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index c512bac69ec5..ecec873e78cd 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -145,8 +145,10 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, { char name[10]; /* 10 = sizeof("gptXX_Xck0") */ struct omap_hwmod *oh; + struct resource irq_rsrc, mem_rsrc; size_t size; int res = 0; + int r; sprintf(name, "timer%d", gptimer_id); omap_hwmod_setup_one(name); @@ -154,9 +156,16 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, if (!oh) return -ENODEV; - timer->irq = oh->mpu_irqs[0].irq; - timer->phys_base = oh->slaves[0]->addr->pa_start; - size = oh->slaves[0]->addr->pa_end - timer->phys_base; + r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, &irq_rsrc); + if (r) + return -ENXIO; + timer->irq = irq_rsrc.start; + + r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL, &mem_rsrc); + if (r) + return -ENXIO; + timer->phys_base = mem_rsrc.start; + size = mem_rsrc.end - mem_rsrc.start; /* Static mapping, never released */ timer->io_base = ioremap(timer->phys_base, size); diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 994d8f591a1d..db84a46ce7fd 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -126,7 +126,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps, unsigned fclk_ps) tmp = (t.sync_clk + fclk_ps - 1) / fclk_ps; if (tmp > 4) return -ERANGE; - if (tmp <= 0) + if (tmp == 0) tmp = 1; t.page_burst_access = (fclk_ps * tmp) / 1000; diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 6604fc6ca58a..0673f0c10432 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -86,7 +86,6 @@ config MACH_WRT350N_V2 config MACH_TS78XX bool "Technologic Systems TS-78xx" - select PM help Say 'Y' here if you want your kernel to support the Technologic Systems TS-78xx platform. diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index 3638e5c12b7e..eaac83d1df6f 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -76,7 +76,7 @@ static int __init cpu_win_can_remap(const struct orion_addr_map_cfg *cfg, /* * Description of the windows needed by the platform code */ -static struct __initdata orion_addr_map_cfg addr_map_cfg = { +static struct orion_addr_map_cfg addr_map_cfg __initdata = { .num_wins = 8, .cpu_win_can_remap = cpu_win_can_remap, .bridge_virt_base = ORION5X_BRIDGE_VIRT_BASE, diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 24481666d2cd..e2e9db492d0c 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -205,7 +205,7 @@ int __init orion5x_find_tclk(void) return 166666667; } -static void orion5x_timer_init(void) +static void __init orion5x_timer_init(void) { orion5x_tclk = orion5x_find_tclk(); diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 2e6454c8d4ba..31bab92ce038 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -45,6 +45,7 @@ void orion5x_restart(char, const char *); */ struct pci_bus; struct pci_sys_data; +struct pci_dev; void orion5x_pcie_id(u32 *dev, u32 *rev); void orion5x_pci_disable(void); diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h index 151e89e1e676..97c393d39ae2 100644 --- a/arch/arm/mach-orion5x/ts78xx-fpga.h +++ b/arch/arm/mach-orion5x/ts78xx-fpga.h @@ -28,9 +28,9 @@ struct fpga_device { struct fpga_devices { /* Technologic Systems */ - struct fpga_device ts_rtc; - struct fpga_device ts_nand; - struct fpga_device ts_rng; + struct fpga_device ts_rtc; + struct fpga_device ts_nand; + struct fpga_device ts_rng; }; struct ts78xx_fpga_data { diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index c96f37472eda..a74f3cf54cc5 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -8,6 +8,8 @@ * warranty of any kind, whether express or implied. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/init.h> #include <linux/sysfs.h> @@ -115,7 +117,7 @@ static struct platform_device ts78xx_ts_rtc_device = { * I've used the method TS use in their rtc7800.c example for the detection * * TODO: track down a guinea pig without an RTC to see if we can work out a - * better RTC detection routine + * better RTC detection routine */ static int ts78xx_ts_rtc_load(void) { @@ -141,10 +143,14 @@ static int ts78xx_ts_rtc_load(void) } else rc = platform_device_add(&ts78xx_ts_rtc_device); + if (rc) + pr_info("RTC could not be registered: %d\n", + rc); return rc; } } + pr_info("RTC not found\n"); return -ENODEV; }; @@ -292,11 +298,8 @@ static struct platform_nand_data ts78xx_ts_nand_data = { }, }; -static struct resource ts78xx_ts_nand_resources = { - .start = TS_NAND_DATA, - .end = TS_NAND_DATA + 4, - .flags = IORESOURCE_MEM, -}; +static struct resource ts78xx_ts_nand_resources + = DEFINE_RES_MEM(TS_NAND_DATA, 4); static struct platform_device ts78xx_ts_nand_device = { .name = "gen_nand", @@ -319,6 +322,8 @@ static int ts78xx_ts_nand_load(void) } else rc = platform_device_add(&ts78xx_ts_nand_device); + if (rc) + pr_info("NAND could not be registered: %d\n", rc); return rc; }; @@ -332,11 +337,8 @@ static void ts78xx_ts_nand_unload(void) ****************************************************************************/ #define TS_RNG_DATA (TS78XX_FPGA_REGS_PHYS_BASE | 0x044) -static struct resource ts78xx_ts_rng_resource = { - .flags = IORESOURCE_MEM, - .start = TS_RNG_DATA, - .end = TS_RNG_DATA + 4 - 1, -}; +static struct resource ts78xx_ts_rng_resource + = DEFINE_RES_MEM(TS_RNG_DATA, 4); static struct timeriomem_rng_data ts78xx_ts_rng_data = { .period = 1000000, /* one second */ @@ -363,6 +365,8 @@ static int ts78xx_ts_rng_load(void) } else rc = platform_device_add(&ts78xx_ts_rng_device); + if (rc) + pr_info("RNG could not be registered: %d\n", rc); return rc; }; @@ -402,7 +406,7 @@ static void ts78xx_fpga_supports(void) /* enable devices if magic matches */ switch ((ts78xx_fpga.id >> 8) & 0xffffff) { case TS7800_FPGA_MAGIC: - pr_warning("TS-7800 FPGA: unrecognized revision 0x%.2x\n", + pr_warning("unrecognised FPGA revision 0x%.2x\n", ts78xx_fpga.id & 0xff); ts78xx_fpga.supports.ts_rtc.present = 1; ts78xx_fpga.supports.ts_nand.present = 1; @@ -422,26 +426,20 @@ static int ts78xx_fpga_load_devices(void) if (ts78xx_fpga.supports.ts_rtc.present == 1) { tmp = ts78xx_ts_rtc_load(); - if (tmp) { - pr_info("TS-78xx: RTC not registered\n"); + if (tmp) ts78xx_fpga.supports.ts_rtc.present = 0; - } ret |= tmp; } if (ts78xx_fpga.supports.ts_nand.present == 1) { tmp = ts78xx_ts_nand_load(); - if (tmp) { - pr_info("TS-78xx: NAND not registered\n"); + if (tmp) ts78xx_fpga.supports.ts_nand.present = 0; - } ret |= tmp; } if (ts78xx_fpga.supports.ts_rng.present == 1) { tmp = ts78xx_ts_rng_load(); - if (tmp) { - pr_info("TS-78xx: RNG not registered\n"); + if (tmp) ts78xx_fpga.supports.ts_rng.present = 0; - } ret |= tmp; } @@ -466,7 +464,7 @@ static int ts78xx_fpga_load(void) { ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE); - pr_info("TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n", + pr_info("FPGA magic=0x%.6x, rev=0x%.2x\n", (ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff); @@ -494,7 +492,7 @@ static int ts78xx_fpga_unload(void) * UrJTAG SVN since r1381 can be used to reprogram the FPGA */ if (ts78xx_fpga.id != fpga_id) { - pr_err("TS-78xx FPGA: magic/rev mismatch\n" + pr_err("FPGA magic/rev mismatch\n" "TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n", (ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff, (fpga_id >> 8) & 0xffffff, fpga_id & 0xff); @@ -525,7 +523,7 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj, int value, ret; if (ts78xx_fpga.state < 0) { - pr_err("TS-78xx FPGA: borked, you must powercycle asap\n"); + pr_err("FPGA borked, you must powercycle ASAP\n"); return -EBUSY; } @@ -533,10 +531,8 @@ static ssize_t ts78xx_fpga_store(struct kobject *kobj, value = 1; else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0) value = 0; - else { - pr_err("ts78xx_fpga_store: Invalid value\n"); + else return -EINVAL; - } if (ts78xx_fpga.state == value) return n; @@ -614,7 +610,7 @@ static void __init ts78xx_init(void) /* FPGA init */ ts78xx_fpga_devices_zero_init(); ret = ts78xx_fpga_load(); - ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr); + ret = sysfs_create_file(firmware_kobj, &ts78xx_fpga_attr.attr); if (ret) pr_err("sysfs_create_file failed: %d\n", ret); } diff --git a/arch/arm/mach-s3c24xx/bast-ide.c b/arch/arm/mach-s3c24xx/bast-ide.c index 298ececfa366..ba02cf8d80a2 100644 --- a/arch/arm/mach-s3c24xx/bast-ide.c +++ b/arch/arm/mach-s3c24xx/bast-ide.c @@ -37,21 +37,9 @@ static struct pata_platform_info bast_ide_platdata = { #define IDE_CS S3C2410_CS5 static struct resource bast_ide0_resource[] = { - [0] = { - .start = IDE_CS + BAST_PA_IDEPRI, - .end = IDE_CS + BAST_PA_IDEPRI + (8 * 0x20) - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20) , - .end = IDE_CS + BAST_PA_IDEPRIAUX + (7 * 0x20) - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_IDE0, - .end = IRQ_IDE0, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRI, 8 * 0x20), + [1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20), + [2] = DEFINE_RES_IRQ(IRQ_IDE0), }; static struct platform_device bast_device_ide0 = { @@ -67,21 +55,9 @@ static struct platform_device bast_device_ide0 = { }; static struct resource bast_ide1_resource[] = { - [0] = { - .start = IDE_CS + BAST_PA_IDESEC, - .end = IDE_CS + BAST_PA_IDESEC + (8 * 0x20) - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), - .end = IDE_CS + BAST_PA_IDESECAUX + (7 * 0x20) - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_IDE1, - .end = IRQ_IDE1, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESEC, 8 * 0x20), + [1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20), + [2] = DEFINE_RES_IRQ(IRQ_IDE1), }; static struct platform_device bast_device_ide1 = { diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index 4220cc60de3c..ea2c4b003d58 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -65,13 +65,8 @@ #include "common.h" -static struct resource amlm5900_nor_resource = { - .start = 0x00000000, - .end = 0x01000000 - 1, - .flags = IORESOURCE_MEM, -}; - - +static struct resource amlm5900_nor_resource = + DEFINE_RES_MEM(0x00000000, SZ_16M); static struct mtd_partition amlm5900_mtd_partitions[] = { { diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index 60c72c54c21e..5a7d0c0010f7 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -235,19 +235,9 @@ static struct pata_platform_info anubis_ide_platdata = { }; static struct resource anubis_ide0_resource[] = { - { - .start = S3C2410_CS3, - .end = S3C2410_CS3 + (8*32) - 1, - .flags = IORESOURCE_MEM, - }, { - .start = S3C2410_CS3 + (1<<26) + (6*32), - .end = S3C2410_CS3 + (1<<26) + (7*32) - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_IDE0, - .end = IRQ_IDE0, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32), + [2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32), + [3] = DEFINE_RES_IRQ(IRQ_IDE0), }; static struct platform_device anubis_device_ide0 = { @@ -262,19 +252,9 @@ static struct platform_device anubis_device_ide0 = { }; static struct resource anubis_ide1_resource[] = { - { - .start = S3C2410_CS4, - .end = S3C2410_CS4 + (8*32) - 1, - .flags = IORESOURCE_MEM, - }, { - .start = S3C2410_CS4 + (1<<26) + (6*32), - .end = S3C2410_CS4 + (1<<26) + (7*32) - 1, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_IDE0, - .end = IRQ_IDE0, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32), + [1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32), + [2] = DEFINE_RES_IRQ(IRQ_IDE0), }; static struct platform_device anubis_device_ide1 = { @@ -298,16 +278,8 @@ static struct ax_plat_data anubis_asix_platdata = { }; static struct resource anubis_asix_resource[] = { - [0] = { - .start = S3C2410_CS5, - .end = S3C2410_CS5 + (0x20 * 0x20) -1, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = IRQ_ASIX, - .end = IRQ_ASIX, - .flags = IORESOURCE_IRQ - } + [0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20), + [1] = DEFINE_RES_IRQ(IRQ_ASIX), }; static struct platform_device anubis_device_asix = { @@ -323,21 +295,9 @@ static struct platform_device anubis_device_asix = { /* SM501 */ static struct resource anubis_sm501_resource[] = { - [0] = { - .start = S3C2410_CS2, - .end = S3C2410_CS2 + SZ_8M, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = S3C2410_CS2 + SZ_64M - SZ_2M, - .end = S3C2410_CS2 + SZ_64M - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_EINT0, - .end = IRQ_EINT0, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(S3C2410_CS2, SZ_8M), + [1] = DEFINE_RES_MEM(S3C2410_CS2 + SZ_64M - SZ_2M, SZ_2M), + [2] = DEFINE_RES_IRQ(IRQ_EINT0), }; static struct sm501_initdata anubis_sm501_initdata = { diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index d7ae49c90118..7a05abf1270b 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -118,21 +118,10 @@ static struct s3c2410_platform_nand __initdata at2440evb_nand_info = { /* DM9000AEP 10/100 ethernet controller */ static struct resource at2440evb_dm9k_resource[] = { - [0] = { - .start = S3C2410_CS3, - .end = S3C2410_CS3 + 3, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = S3C2410_CS3 + 4, - .end = S3C2410_CS3 + 7, - .flags = IORESOURCE_MEM - }, - [2] = { - .start = IRQ_EINT7, - .end = IRQ_EINT7, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - } + [0] = DEFINE_RES_MEM(S3C2410_CS3, 4), + [1] = DEFINE_RES_MEM(S3C2410_CS3 + 4, 4), + [2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ \ + | IORESOURCE_IRQ_HIGHEDGE), }; static struct dm9000_plat_data at2440evb_dm9k_pdata = { diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index 53219c02eca0..1cf1720682d3 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -310,22 +310,10 @@ static struct s3c2410_platform_nand __initdata bast_nand_info = { /* DM9000 */ static struct resource bast_dm9k_resource[] = { - [0] = { - .start = S3C2410_CS5 + BAST_PA_DM9000, - .end = S3C2410_CS5 + BAST_PA_DM9000 + 3, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40, - .end = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_DM9000, - .end = IRQ_DM9000, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - } - + [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4), + [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40), + [2] = DEFINE_RES_NAMED(IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \ + | IORESOURCE_IRQ_HIGHLEVEL), }; /* for the moment we limit ourselves to 16bit IO until some @@ -400,21 +388,9 @@ static struct ax_plat_data bast_asix_platdata = { }; static struct resource bast_asix_resource[] = { - [0] = { - .start = S3C2410_CS5 + BAST_PA_ASIXNET, - .end = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20) - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), - .end = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_ASIX, - .end = IRQ_ASIX, - .flags = IORESOURCE_IRQ - } + [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20), + [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1), + [2] = DEFINE_RES_IRQ(IRQ_ASIX), }; static struct platform_device bast_device_asix = { @@ -430,11 +406,8 @@ static struct platform_device bast_device_asix = { /* Asix AX88796 10/100 ethernet controller parallel port */ static struct resource bast_asixpp_resource[] = { - [0] = { - .start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20), - .end = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1b * 0x20) - 1, - .flags = IORESOURCE_MEM, - } + [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20), \ + 0x30 * 0x20), }; static struct platform_device bast_device_axpp = { diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index ba5d85394105..0f29f64a3eeb 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -387,11 +387,8 @@ static struct physmap_flash_data gta02_nor_flash_data = { .width = 2, }; -static struct resource gta02_nor_flash_resource = { - .start = GTA02_FLASH_BASE, - .end = GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource gta02_nor_flash_resource = + DEFINE_RES_MEM(GTA02_FLASH_BASE, GTA02_FLASH_SIZE); static struct platform_device gta02_nor_flash = { .name = "physmap-flash", diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index 6b21ba107eab..bb8d008d5a5c 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -253,13 +253,8 @@ static struct pda_power_pdata power_supply_info = { }; static struct resource power_supply_resources[] = { - [0] = { - .name = "ac", - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE | - IORESOURCE_IRQ_HIGHEDGE, - .start = IRQ_EINT2, - .end = IRQ_EINT2, - }, + [0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \ + | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE), }; static struct platform_device power_supply = { diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 5d66fb218a41..f092b188ab70 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -292,21 +292,10 @@ static struct s3c2410_platform_nand mini2440_nand_info __initdata = { /* DM9000AEP 10/100 ethernet controller */ static struct resource mini2440_dm9k_resource[] = { - [0] = { - .start = MACH_MINI2440_DM9K_BASE, - .end = MACH_MINI2440_DM9K_BASE + 3, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = MACH_MINI2440_DM9K_BASE + 4, - .end = MACH_MINI2440_DM9K_BASE + 7, - .flags = IORESOURCE_MEM - }, - [2] = { - .start = IRQ_EINT7, - .end = IRQ_EINT7, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - } + [0] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE, 4), + [1] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE + 4, 4), + [2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ \ + | IORESOURCE_IRQ_HIGHEDGE), }; /* diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index 5198e3e1c5be..5c05ba1c330f 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -84,11 +84,7 @@ static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = { /* NOR Flash on NexVision NexCoder 2440 board */ static struct resource nexcoder_nor_resource[] = { - [0] = { - .start = S3C2410_CS0, - .end = S3C2410_CS0 + (8*1024*1024) - 1, - .flags = IORESOURCE_MEM, - } + [0] = DEFINE_RES_MEM(S3C2410_CS0, SZ_8M), }; static struct map_info nexcoder_nor_map = { diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index c5daeb612a88..95d077255024 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -244,16 +244,8 @@ static struct s3c2410_platform_nand __initdata osiris_nand_info = { /* PCMCIA control and configuration */ static struct resource osiris_pcmcia_resource[] = { - [0] = { - .start = 0x0f000000, - .end = 0x0f100000, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0x0c000000, - .end = 0x0c100000, - .flags = IORESOURCE_MEM, - } + [0] = DEFINE_RES_MEM(0x0f000000, SZ_1M), + [1] = DEFINE_RES_MEM(0x0c000000, SZ_1M), }; static struct platform_device osiris_pcmcia = { diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index 5f1e0eeb38a9..bc4b6efb3b27 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -77,11 +77,7 @@ static struct s3c2410_uartcfg otom11_uartcfgs[] __initdata = { /* NOR Flash on NexVision OTOM board */ static struct resource otom_nor_resource[] = { - [0] = { - .start = S3C2410_CS0, - .end = S3C2410_CS0 + (4*1024*1024) - 1, - .flags = IORESOURCE_MEM, - } + [0] = DEFINE_RES_MEM(S3C2410_CS0, SZ_4M), }; static struct platform_device otom_device_nor = { diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 91c16d9d2459..b868dddcb836 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -180,16 +180,8 @@ static struct s3c2410fb_mach_info qt2410_fb_info __initdata = { /* CS8900 */ static struct resource qt2410_cs89x0_resources[] = { - [0] = { - .start = 0x19000000, - .end = 0x19000000 + 16, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_EINT9, - .end = IRQ_EINT9, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(0x19000000, 17), + [1] = DEFINE_RES_IRQ(IRQ_EINT9), }; static struct platform_device qt2410_cs89x0 = { diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index 200debb4c72d..a6762aae4727 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -152,13 +152,8 @@ static struct pda_power_pdata power_supply_info = { }; static struct resource power_supply_resources[] = { - [0] = { - .name = "ac", - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE | - IORESOURCE_IRQ_HIGHEDGE, - .start = IRQ_EINT2, - .end = IRQ_EINT2, - }, + [0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \ + | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE), }; static struct platform_device power_supply = { diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 1114666f0efb..fe990289ee7d 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -56,11 +56,8 @@ #include "common.h" -static struct resource tct_hammer_nor_resource = { - .start = 0x00000000, - .end = 0x01000000 - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource tct_hammer_nor_resource = + DEFINE_RES_MEM(0x00000000, SZ_16M); static struct mtd_partition tct_hammer_mtd_partitions[] = { { diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index 87608d45dac4..bd5f189f0424 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -187,40 +187,17 @@ static struct platform_device serial_device = { /* DM9000 ethernet devices */ static struct resource vr1000_dm9k0_resource[] = { - [0] = { - .start = S3C2410_CS5 + VR1000_PA_DM9000, - .end = S3C2410_CS5 + VR1000_PA_DM9000 + 3, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = S3C2410_CS5 + VR1000_PA_DM9000 + 0x40, - .end = S3C2410_CS5 + VR1000_PA_DM9000 + 0x7f, - .flags = IORESOURCE_MEM - }, - [2] = { - .start = IRQ_VR1000_DM9000A, - .end = IRQ_VR1000_DM9000A, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - } - + [0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000, 4), + [1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x40, 0x40), + [2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000A, 1, NULL, IORESOURCE_IRQ \ + | IORESOURCE_IRQ_HIGHLEVEL), }; static struct resource vr1000_dm9k1_resource[] = { - [0] = { - .start = S3C2410_CS5 + VR1000_PA_DM9000 + 0x80, - .end = S3C2410_CS5 + VR1000_PA_DM9000 + 0x83, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0, - .end = S3C2410_CS5 + VR1000_PA_DM9000 + 0xFF, - .flags = IORESOURCE_MEM - }, - [2] = { - .start = IRQ_VR1000_DM9000N, - .end = IRQ_VR1000_DM9000N, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - } + [0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x80, 4), + [1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0, 0x40), + [2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000N, 1, NULL, IORESOURCE_IRQ \ + | IORESOURCE_IRQ_HIGHLEVEL), }; /* for the moment we limit ourselves to 16bit IO until some diff --git a/arch/arm/mach-s3c24xx/simtec-nor.c b/arch/arm/mach-s3c24xx/simtec-nor.c index b9d6d4f92c03..029744fcaacb 100644 --- a/arch/arm/mach-s3c24xx/simtec-nor.c +++ b/arch/arm/mach-s3c24xx/simtec-nor.c @@ -55,11 +55,7 @@ static struct physmap_flash_data simtec_nor_pdata = { }; static struct resource simtec_nor_resource[] = { - [0] = { - .start = S3C2410_CS1 + 0x4000000, - .end = S3C2410_CS1 + 0x4000000 + SZ_8M - 1, - .flags = IORESOURCE_MEM, - } + [0] = DEFINE_RES_MEM(S3C2410_CS1 + 0x4000000, SZ_8M), }; static struct platform_device simtec_device_nor = { diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c index 93470b158a4e..124fd5d63006 100644 --- a/arch/arm/mach-s3c64xx/dev-audio.c +++ b/arch/arm/mach-s3c64xx/dev-audio.c @@ -57,21 +57,9 @@ static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev) } static struct resource s3c64xx_iis0_resource[] = { - [0] = { - .start = S3C64XX_PA_IIS0, - .end = S3C64XX_PA_IIS0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S0_OUT, - .end = DMACH_I2S0_OUT, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S0_IN, - .end = DMACH_I2S0_IN, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S3C64XX_PA_IIS0, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S0_OUT), + [2] = DEFINE_RES_DMA(DMACH_I2S0_IN), }; static struct s3c_audio_pdata i2sv3_pdata = { @@ -95,21 +83,9 @@ struct platform_device s3c64xx_device_iis0 = { EXPORT_SYMBOL(s3c64xx_device_iis0); static struct resource s3c64xx_iis1_resource[] = { - [0] = { - .start = S3C64XX_PA_IIS1, - .end = S3C64XX_PA_IIS1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S1_OUT, - .end = DMACH_I2S1_OUT, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S1_IN, - .end = DMACH_I2S1_IN, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S3C64XX_PA_IIS1, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S1_OUT), + [2] = DEFINE_RES_DMA(DMACH_I2S1_IN), }; struct platform_device s3c64xx_device_iis1 = { @@ -124,21 +100,9 @@ struct platform_device s3c64xx_device_iis1 = { EXPORT_SYMBOL(s3c64xx_device_iis1); static struct resource s3c64xx_iisv4_resource[] = { - [0] = { - .start = S3C64XX_PA_IISV4, - .end = S3C64XX_PA_IISV4 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_HSI_I2SV40_TX, - .end = DMACH_HSI_I2SV40_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_HSI_I2SV40_RX, - .end = DMACH_HSI_I2SV40_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S3C64XX_PA_IISV4, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_HSI_I2SV40_TX), + [2] = DEFINE_RES_DMA(DMACH_HSI_I2SV40_RX), }; static struct s3c_audio_pdata i2sv4_pdata = { @@ -187,21 +151,9 @@ static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev) } static struct resource s3c64xx_pcm0_resource[] = { - [0] = { - .start = S3C64XX_PA_PCM0, - .end = S3C64XX_PA_PCM0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM0_TX, - .end = DMACH_PCM0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM0_RX, - .end = DMACH_PCM0_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S3C64XX_PA_PCM0, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_PCM0_TX), + [2] = DEFINE_RES_DMA(DMACH_PCM0_RX), }; static struct s3c_audio_pdata s3c_pcm0_pdata = { @@ -220,21 +172,9 @@ struct platform_device s3c64xx_device_pcm0 = { EXPORT_SYMBOL(s3c64xx_device_pcm0); static struct resource s3c64xx_pcm1_resource[] = { - [0] = { - .start = S3C64XX_PA_PCM1, - .end = S3C64XX_PA_PCM1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM1_TX, - .end = DMACH_PCM1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM1_RX, - .end = DMACH_PCM1_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S3C64XX_PA_PCM1, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_PCM1_TX), + [2] = DEFINE_RES_DMA(DMACH_PCM1_RX), }; static struct s3c_audio_pdata s3c_pcm1_pdata = { @@ -265,31 +205,11 @@ static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev) } static struct resource s3c64xx_ac97_resource[] = { - [0] = { - .start = S3C64XX_PA_AC97, - .end = S3C64XX_PA_AC97 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_AC97_PCMOUT, - .end = DMACH_AC97_PCMOUT, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_AC97_PCMIN, - .end = DMACH_AC97_PCMIN, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DMACH_AC97_MICIN, - .end = DMACH_AC97_MICIN, - .flags = IORESOURCE_DMA, - }, - [4] = { - .start = IRQ_AC97, - .end = IRQ_AC97, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(S3C64XX_PA_AC97, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT), + [2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN), + [3] = DEFINE_RES_DMA(DMACH_AC97_MICIN), + [4] = DEFINE_RES_IRQ(IRQ_AC97), }; static struct s3c_audio_pdata s3c_ac97_pdata; diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c index c681b99eda08..46e18d77ea93 100644 --- a/arch/arm/mach-s3c64xx/dev-uart.c +++ b/arch/arm/mach-s3c64xx/dev-uart.c @@ -31,55 +31,23 @@ /* 64xx uarts are closer together */ static struct resource s3c64xx_uart0_resource[] = { - [0] = { - .start = S3C_PA_UART0, - .end = S3C_PA_UART0 + 0x100, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_UART0, - .end = IRQ_UART0, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(S3C_PA_UART0, SZ_256), + [1] = DEFINE_RES_IRQ(IRQ_UART0), }; static struct resource s3c64xx_uart1_resource[] = { - [0] = { - .start = S3C_PA_UART1, - .end = S3C_PA_UART1 + 0x100, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_UART1, - .end = IRQ_UART1, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(S3C_PA_UART1, SZ_256), + [1] = DEFINE_RES_IRQ(IRQ_UART1), }; static struct resource s3c6xx_uart2_resource[] = { - [0] = { - .start = S3C_PA_UART2, - .end = S3C_PA_UART2 + 0x100, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_UART2, - .end = IRQ_UART2, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(S3C_PA_UART2, SZ_256), + [1] = DEFINE_RES_IRQ(IRQ_UART2), }; static struct resource s3c64xx_uart3_resource[] = { - [0] = { - .start = S3C_PA_UART3, - .end = S3C_PA_UART3 + 0x100, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_UART3, - .end = IRQ_UART3, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(S3C_PA_UART3, SZ_256), + [1] = DEFINE_RES_IRQ(IRQ_UART3), }; diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index b86f2779e4e6..f252691fb209 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -165,21 +165,10 @@ static void __init anw6410_dm9000_enable(void) } static struct resource anw6410_dm9000_resource[] = { - [0] = { - .start = ANW6410_PA_DM9000, - .end = ANW6410_PA_DM9000 + 3, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = ANW6410_PA_DM9000 + 4, - .end = ANW6410_PA_DM9000 + 4 + 500, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_EINT(15), - .end = IRQ_EINT(15), - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, - }, + [0] = DEFINE_RES_MEM(ANW6410_PA_DM9000, 4), + [1] = DEFINE_RES_MEM(ANW6410_PA_DM9000 + 4, 501), + [2] = DEFINE_RES_NAMED(IRQ_EINT(15), 1, NULL, IORESOURCE_IRQ \ + | IRQF_TRIGGER_HIGH), }; static struct dm9000_plat_data anw6410_dm9000_pdata = { diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index e20bf5835365..164467cbb7ea 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -232,21 +232,10 @@ static struct platform_device crag6410_gpio_keydev = { }; static struct resource crag6410_dm9k_resource[] = { - [0] = { - .start = S3C64XX_PA_XM0CSN5, - .end = S3C64XX_PA_XM0CSN5 + 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = S3C64XX_PA_XM0CSN5 + (1 << 8), - .end = S3C64XX_PA_XM0CSN5 + (1 << 8) + 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = S3C_EINT(17), - .end = S3C_EINT(17), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, + [0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN5, 2), + [1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN5 + (1 << 8), 2), + [2] = DEFINE_RES_NAMED(S3C_EINT(17), 1, NULL, IORESOURCE_IRQ \ + | IORESOURCE_IRQ_HIGHLEVEL), }; static struct dm9000_plat_data mini6410_dm9k_pdata = { @@ -262,12 +251,7 @@ static struct platform_device crag6410_dm9k_device = { }; static struct resource crag6410_mmgpio_resource[] = { - [0] = { - .name = "dat", - .start = S3C64XX_PA_XM0CSN4 + 1, - .end = S3C64XX_PA_XM0CSN4 + 1, - .flags = IORESOURCE_MEM, - }, + [0] = DEFINE_RES_MEM_NAMED(S3C64XX_PA_XM0CSN4, 1, "dat"), }; static struct platform_device crag6410_mmgpio = { diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index c34c2ab22ead..b2166d4a5538 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -85,21 +85,10 @@ static struct s3c2410_uartcfg mini6410_uartcfgs[] __initdata = { /* DM9000AEP 10/100 ethernet controller */ static struct resource mini6410_dm9k_resource[] = { - [0] = { - .start = S3C64XX_PA_XM0CSN1, - .end = S3C64XX_PA_XM0CSN1 + 1, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = S3C64XX_PA_XM0CSN1 + 4, - .end = S3C64XX_PA_XM0CSN1 + 5, - .flags = IORESOURCE_MEM - }, - [2] = { - .start = S3C_EINT(7), - .end = S3C_EINT(7), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL - } + [0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2), + [1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2), + [2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \ + | IORESOURCE_IRQ_HIGHLEVEL), }; static struct dm9000_plat_data mini6410_dm9k_pdata = { diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index be2a9a22ab74..5c08266cea21 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -86,21 +86,10 @@ static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = { /* DM9000AEP 10/100 ethernet controller */ static struct resource real6410_dm9k_resource[] = { - [0] = { - .start = S3C64XX_PA_XM0CSN1, - .end = S3C64XX_PA_XM0CSN1 + 1, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = S3C64XX_PA_XM0CSN1 + 4, - .end = S3C64XX_PA_XM0CSN1 + 5, - .flags = IORESOURCE_MEM - }, - [2] = { - .start = S3C_EINT(7), - .end = S3C_EINT(7), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL - } + [0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2), + [1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2), + [2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \ + | IORESOURCE_IRQ_HIGHLEVEL), }; static struct dm9000_plat_data real6410_dm9k_pdata = { diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index d55bc96d9582..1ecd0485a9b6 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -182,16 +182,9 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = { */ static struct resource smdk6410_smsc911x_resources[] = { - [0] = { - .start = S3C64XX_PA_XM0CSN1, - .end = S3C64XX_PA_XM0CSN1 + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = S3C_EINT(10), - .end = S3C_EINT(10), - .flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW, - }, + [0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, SZ_64K), + [1] = DEFINE_RES_NAMED(S3C_EINT(10), 1, NULL, IORESOURCE_IRQ \ + | IRQ_TYPE_LEVEL_LOW), }; static struct smsc911x_platform_config smdk6410_smsc911x_pdata = { diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c index 35f1f226dabb..91113ddc51da 100644 --- a/arch/arm/mach-s5p64x0/dev-audio.c +++ b/arch/arm/mach-s5p64x0/dev-audio.c @@ -51,21 +51,9 @@ static struct s3c_audio_pdata s5p6440_i2s_pdata = { }; static struct resource s5p64x0_i2s0_resource[] = { - [0] = { - .start = S5P64X0_PA_I2S, - .end = S5P64X0_PA_I2S + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S0_TX, - .end = DMACH_I2S0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S0_RX, - .end = DMACH_I2S0_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5P64X0_PA_I2S, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S0_TX), + [2] = DEFINE_RES_DMA(DMACH_I2S0_RX), }; struct platform_device s5p6440_device_iis = { @@ -130,21 +118,9 @@ static struct s3c_audio_pdata s5p6450_i2s_pdata = { }; static struct resource s5p6450_i2s1_resource[] = { - [0] = { - .start = S5P6450_PA_I2S1, - .end = S5P6450_PA_I2S1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S1_TX, - .end = DMACH_I2S1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S1_RX, - .end = DMACH_I2S1_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5P6450_PA_I2S1, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S1_TX), + [2] = DEFINE_RES_DMA(DMACH_I2S1_RX), }; struct platform_device s5p6450_device_iis1 = { @@ -158,21 +134,9 @@ struct platform_device s5p6450_device_iis1 = { }; static struct resource s5p6450_i2s2_resource[] = { - [0] = { - .start = S5P6450_PA_I2S2, - .end = S5P6450_PA_I2S2 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S2_TX, - .end = DMACH_I2S2_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S2_RX, - .end = DMACH_I2S2_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5P6450_PA_I2S2, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S2_TX), + [2] = DEFINE_RES_DMA(DMACH_I2S2_RX), }; struct platform_device s5p6450_device_iis2 = { @@ -208,21 +172,9 @@ static struct s3c_audio_pdata s5p6440_pcm_pdata = { }; static struct resource s5p6440_pcm0_resource[] = { - [0] = { - .start = S5P64X0_PA_PCM, - .end = S5P64X0_PA_PCM + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM0_TX, - .end = DMACH_PCM0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM0_RX, - .end = DMACH_PCM0_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5P64X0_PA_PCM, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_PCM0_TX), + [2] = DEFINE_RES_DMA(DMACH_PCM0_RX), }; struct platform_device s5p6440_device_pcm = { diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c index ab2d27172cbc..9d4bde3f1110 100644 --- a/arch/arm/mach-s5pc100/dev-audio.c +++ b/arch/arm/mach-s5pc100/dev-audio.c @@ -56,26 +56,10 @@ static struct s3c_audio_pdata i2sv5_pdata = { }; static struct resource s5pc100_iis0_resource[] = { - [0] = { - .start = S5PC100_PA_I2S0, - .end = S5PC100_PA_I2S0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S0_TX, - .end = DMACH_I2S0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S0_RX, - .end = DMACH_I2S0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DMACH_I2S0S_TX, - .end = DMACH_I2S0S_TX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PC100_PA_I2S0, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S0_TX), + [2] = DEFINE_RES_DMA(DMACH_I2S0_RX), + [3] = DEFINE_RES_DMA(DMACH_I2S0S_TX), }; struct platform_device s5pc100_device_iis0 = { @@ -103,21 +87,9 @@ static struct s3c_audio_pdata i2sv3_pdata = { }; static struct resource s5pc100_iis1_resource[] = { - [0] = { - .start = S5PC100_PA_I2S1, - .end = S5PC100_PA_I2S1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S1_TX, - .end = DMACH_I2S1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S1_RX, - .end = DMACH_I2S1_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PC100_PA_I2S1, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S1_TX), + [2] = DEFINE_RES_DMA(DMACH_I2S1_RX), }; struct platform_device s5pc100_device_iis1 = { @@ -131,21 +103,9 @@ struct platform_device s5pc100_device_iis1 = { }; static struct resource s5pc100_iis2_resource[] = { - [0] = { - .start = S5PC100_PA_I2S2, - .end = S5PC100_PA_I2S2 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S2_TX, - .end = DMACH_I2S2_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S2_RX, - .end = DMACH_I2S2_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PC100_PA_I2S2, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S2_TX), + [2] = DEFINE_RES_DMA(DMACH_I2S2_RX), }; struct platform_device s5pc100_device_iis2 = { @@ -184,21 +144,9 @@ static struct s3c_audio_pdata s3c_pcm_pdata = { }; static struct resource s5pc100_pcm0_resource[] = { - [0] = { - .start = S5PC100_PA_PCM0, - .end = S5PC100_PA_PCM0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM0_TX, - .end = DMACH_PCM0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM0_RX, - .end = DMACH_PCM0_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PC100_PA_PCM0, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_PCM0_TX), + [2] = DEFINE_RES_DMA(DMACH_PCM0_RX), }; struct platform_device s5pc100_device_pcm0 = { @@ -212,21 +160,9 @@ struct platform_device s5pc100_device_pcm0 = { }; static struct resource s5pc100_pcm1_resource[] = { - [0] = { - .start = S5PC100_PA_PCM1, - .end = S5PC100_PA_PCM1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM1_TX, - .end = DMACH_PCM1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM1_RX, - .end = DMACH_PCM1_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PC100_PA_PCM1, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_PCM1_TX), + [2] = DEFINE_RES_DMA(DMACH_PCM1_RX), }; struct platform_device s5pc100_device_pcm1 = { @@ -247,31 +183,11 @@ static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev) } static struct resource s5pc100_ac97_resource[] = { - [0] = { - .start = S5PC100_PA_AC97, - .end = S5PC100_PA_AC97 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_AC97_PCMOUT, - .end = DMACH_AC97_PCMOUT, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_AC97_PCMIN, - .end = DMACH_AC97_PCMIN, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DMACH_AC97_MICIN, - .end = DMACH_AC97_MICIN, - .flags = IORESOURCE_DMA, - }, - [4] = { - .start = IRQ_AC97, - .end = IRQ_AC97, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(S5PC100_PA_AC97, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT), + [2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN), + [3] = DEFINE_RES_DMA(DMACH_AC97_MICIN), + [4] = DEFINE_RES_IRQ(IRQ_AC97), }; static struct s3c_audio_pdata s3c_ac97_pdata = { @@ -308,16 +224,8 @@ static int s5pc100_spdif_cfg_gpg3(struct platform_device *pdev) } static struct resource s5pc100_spdif_resource[] = { - [0] = { - .start = S5PC100_PA_SPDIF, - .end = S5PC100_PA_SPDIF + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPDIF, - .end = DMACH_SPDIF, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PC100_PA_SPDIF, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_SPDIF), }; static struct s3c_audio_pdata s5p_spdif_pdata = { diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c index 63f5d82004b5..8367749c3eec 100644 --- a/arch/arm/mach-s5pv210/dev-audio.c +++ b/arch/arm/mach-s5pv210/dev-audio.c @@ -59,26 +59,10 @@ static struct s3c_audio_pdata i2sv5_pdata = { }; static struct resource s5pv210_iis0_resource[] = { - [0] = { - .start = S5PV210_PA_IIS0, - .end = S5PV210_PA_IIS0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S0_TX, - .end = DMACH_I2S0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S0_RX, - .end = DMACH_I2S0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DMACH_I2S0S_TX, - .end = DMACH_I2S0S_TX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PV210_PA_IIS0, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S0_TX), + [2] = DEFINE_RES_DMA(DMACH_I2S0_RX), + [3] = DEFINE_RES_DMA(DMACH_I2S0S_TX), }; struct platform_device s5pv210_device_iis0 = { @@ -106,21 +90,9 @@ static struct s3c_audio_pdata i2sv3_pdata = { }; static struct resource s5pv210_iis1_resource[] = { - [0] = { - .start = S5PV210_PA_IIS1, - .end = S5PV210_PA_IIS1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S1_TX, - .end = DMACH_I2S1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S1_RX, - .end = DMACH_I2S1_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PV210_PA_IIS1, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S1_TX), + [2] = DEFINE_RES_DMA(DMACH_I2S1_RX), }; struct platform_device s5pv210_device_iis1 = { @@ -134,21 +106,9 @@ struct platform_device s5pv210_device_iis1 = { }; static struct resource s5pv210_iis2_resource[] = { - [0] = { - .start = S5PV210_PA_IIS2, - .end = S5PV210_PA_IIS2 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S2_TX, - .end = DMACH_I2S2_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S2_RX, - .end = DMACH_I2S2_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PV210_PA_IIS2, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_I2S2_TX), + [2] = DEFINE_RES_DMA(DMACH_I2S2_RX), }; struct platform_device s5pv210_device_iis2 = { @@ -188,21 +148,9 @@ static struct s3c_audio_pdata s3c_pcm_pdata = { }; static struct resource s5pv210_pcm0_resource[] = { - [0] = { - .start = S5PV210_PA_PCM0, - .end = S5PV210_PA_PCM0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM0_TX, - .end = DMACH_PCM0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM0_RX, - .end = DMACH_PCM0_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PV210_PA_PCM0, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_PCM0_TX), + [2] = DEFINE_RES_DMA(DMACH_PCM0_RX), }; struct platform_device s5pv210_device_pcm0 = { @@ -216,21 +164,9 @@ struct platform_device s5pv210_device_pcm0 = { }; static struct resource s5pv210_pcm1_resource[] = { - [0] = { - .start = S5PV210_PA_PCM1, - .end = S5PV210_PA_PCM1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM1_TX, - .end = DMACH_PCM1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM1_RX, - .end = DMACH_PCM1_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PV210_PA_PCM1, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_PCM1_TX), + [2] = DEFINE_RES_DMA(DMACH_PCM1_RX), }; struct platform_device s5pv210_device_pcm1 = { @@ -244,21 +180,9 @@ struct platform_device s5pv210_device_pcm1 = { }; static struct resource s5pv210_pcm2_resource[] = { - [0] = { - .start = S5PV210_PA_PCM2, - .end = S5PV210_PA_PCM2 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM2_TX, - .end = DMACH_PCM2_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM2_RX, - .end = DMACH_PCM2_RX, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PV210_PA_PCM2, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_PCM2_TX), + [2] = DEFINE_RES_DMA(DMACH_PCM2_RX), }; struct platform_device s5pv210_device_pcm2 = { @@ -279,31 +203,11 @@ static int s5pv210_ac97_cfg_gpio(struct platform_device *pdev) } static struct resource s5pv210_ac97_resource[] = { - [0] = { - .start = S5PV210_PA_AC97, - .end = S5PV210_PA_AC97 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_AC97_PCMOUT, - .end = DMACH_AC97_PCMOUT, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_AC97_PCMIN, - .end = DMACH_AC97_PCMIN, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DMACH_AC97_MICIN, - .end = DMACH_AC97_MICIN, - .flags = IORESOURCE_DMA, - }, - [4] = { - .start = IRQ_AC97, - .end = IRQ_AC97, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(S5PV210_PA_AC97, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT), + [2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN), + [3] = DEFINE_RES_DMA(DMACH_AC97_MICIN), + [4] = DEFINE_RES_IRQ(IRQ_AC97), }; static struct s3c_audio_pdata s3c_ac97_pdata = { @@ -334,16 +238,8 @@ static int s5pv210_spdif_cfg_gpio(struct platform_device *pdev) } static struct resource s5pv210_spdif_resource[] = { - [0] = { - .start = S5PV210_PA_SPDIF, - .end = S5PV210_PA_SPDIF + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPDIF, - .end = DMACH_SPDIF, - .flags = IORESOURCE_DMA, - }, + [0] = DEFINE_RES_MEM(S5PV210_PA_SPDIF, SZ_256), + [1] = DEFINE_RES_DMA(DMACH_SPDIF), }; static struct s3c_audio_pdata samsung_spdif_pdata = { diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 91d4ad8bcc73..fa1b61209fd9 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -119,21 +119,10 @@ static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = { }; static struct resource smdkv210_dm9000_resources[] = { - [0] = { - .start = S5PV210_PA_SROM_BANK5, - .end = S5PV210_PA_SROM_BANK5, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = S5PV210_PA_SROM_BANK5 + 2, - .end = S5PV210_PA_SROM_BANK5 + 2, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_EINT(9), - .end = IRQ_EINT(9), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, + [0] = DEFINE_RES_MEM(S5PV210_PA_SROM_BANK5, 1), + [1] = DEFINE_RES_MEM(S5PV210_PA_SROM_BANK5 + 2, 1), + [2] = DEFINE_RES_NAMED(IRQ_EINT(9), 1, NULL, IORESOURCE_IRQ \ + | IORESOURCE_IRQ_HIGHLEVEL), }; static struct dm9000_plat_data smdkv210_dm9000_platdata = { diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index 0952494f481a..72ae62003520 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -37,7 +37,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/setup.h> -#include <asm/hardware/gic.h> #include <mach/iomap.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h index 3c9339058bec..9077092812c0 100644 --- a/arch/arm/mach-tegra/include/mach/dma.h +++ b/arch/arm/mach-tegra/include/mach/dma.h @@ -51,8 +51,6 @@ #define TEGRA_DMA_REQ_SEL_OWR 25 #define TEGRA_DMA_REQ_SEL_INVALID 31 -#if defined(CONFIG_TEGRA_SYSTEM_DMA) - struct tegra_dma_req; struct tegra_dma_channel; @@ -151,5 +149,3 @@ void tegra_dma_free_channel(struct tegra_dma_channel *ch); int __init tegra_dma_init(void); #endif - -#endif diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index ef7099eea0f2..0e8470a3fbeb 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -10,10 +10,6 @@ config UX500_SOC_COMMON select ARM_ERRATA_764369 select CACHE_L2X0 -config UX500_SOC_DB5500 - bool - select MFD_DB5500_PRCMU - config UX500_SOC_DB8500 bool select MFD_DB8500_PRCMU @@ -45,15 +41,8 @@ config MACH_SNOWBALL help Include support for the snowball development platform. -config MACH_U5500 - bool "U5500 Development platform" - select UX500_SOC_DB5500 - help - Include support for the U5500 development platform. - config UX500_AUTO_PLATFORM def_bool y - depends on !MACH_U5500 select MACH_MOP500 help At least one platform needs to be selected in order to build @@ -74,18 +63,4 @@ config UX500_DEBUG_UART Choose the UART on which kernel low-level debug messages should be output. -config U5500_MODEM_IRQ - bool "Modem IRQ support" - depends on UX500_SOC_DB5500 - default y - help - Add support for handling IRQ:s from modem side - -config U5500_MBOX - bool "Mailbox support" - depends on U5500_MODEM_IRQ - default y - help - Add support for U5500 mailbox communication with modem side - endif diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 465b9ec9510a..fc7db5df970b 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -5,16 +5,11 @@ obj-y := clock.o cpu.o devices.o devices-common.o \ id.o usb.o timer.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o -obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \ board-mop500-regulators.o \ board-mop500-uib.o board-mop500-stuib.o \ board-mop500-u8500uib.o \ board-mop500-pins.o -obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_U5500_MODEM_IRQ) += modem-irq-db5500.o -obj-$(CONFIG_U5500_MBOX) += mbox-db5500.o - diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c deleted file mode 100644 index 836112eedde7..000000000000 --- a/arch/arm/mach-ux500/board-u5500-sdi.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Hanumath Prasad <ulf.hansson@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/amba/mmci.h> -#include <linux/mmc/host.h> - -#include <plat/pincfg.h> -#include <plat/gpio-nomadik.h> -#include <mach/db5500-regs.h> -#include <plat/ste_dma40.h> - -#include "pins-db5500.h" -#include "devices-db5500.h" -#include "ste-dma40-db5500.h" - -static pin_cfg_t u5500_sdi_pins[] = { - /* SDI0 (POP eMMC) */ - GPIO5_MC0_DAT0 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO6_MC0_DAT1 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO7_MC0_DAT2 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO8_MC0_DAT3 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO9_MC0_DAT4 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO10_MC0_DAT5 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO11_MC0_DAT6 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO12_MC0_DAT7 | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO13_MC0_CMD | PIN_DIR_INPUT | PIN_PULL_UP, - GPIO14_MC0_CLK | PIN_DIR_OUTPUT | PIN_VAL_LOW, -}; - -#ifdef CONFIG_STE_DMA40 -struct stedma40_chan_cfg u5500_sdi0_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_PERIPH_TO_MEM, - .src_dev_type = DB5500_DMA_DEV24_SDMMC0_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, -}; - -static struct stedma40_chan_cfg u5500_sdi0_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = STEDMA40_MEM_TO_PERIPH, - .src_dev_type = STEDMA40_DEV_SRC_MEMORY, - .dst_dev_type = DB5500_DMA_DEV24_SDMMC0_TX, - .src_info.data_width = STEDMA40_WORD_WIDTH, - .dst_info.data_width = STEDMA40_WORD_WIDTH, -}; -#endif - -static struct mmci_platform_data u5500_sdi0_data = { - .ocr_mask = MMC_VDD_165_195, - .f_max = 50000000, - .capabilities = MMC_CAP_4_BIT_DATA | - MMC_CAP_8_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED, - .gpio_cd = -1, - .gpio_wp = -1, -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &u5500_sdi0_dma_cfg_rx, - .dma_tx_param = &u5500_sdi0_dma_cfg_tx, -#endif -}; - -void __init u5500_sdi_init(struct device *parent) -{ - nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins)); - - db5500_add_sdi0(parent, &u5500_sdi0_data); -} diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c deleted file mode 100644 index 0ff4be72a809..000000000000 --- a/arch/arm/mach-ux500/board-u5500.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/amba/bus.h> -#include <linux/irq.h> -#include <linux/i2c.h> -#include <linux/mfd/abx500/ab5500.h> - -#include <asm/hardware/gic.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <plat/pincfg.h> -#include <plat/i2c.h> -#include <plat/gpio-nomadik.h> - -#include <mach/hardware.h> -#include <mach/devices.h> -#include <mach/setup.h> - -#include "pins-db5500.h" -#include "devices-db5500.h" -#include <linux/led-lm3530.h> - -/* - * GPIO - */ - -static pin_cfg_t u5500_pins[] = { - /* I2C */ - GPIO218_I2C2_SCL | PIN_INPUT_PULLUP, - GPIO219_I2C2_SDA | PIN_INPUT_PULLUP, - - /* DISPLAY_ENABLE */ - GPIO226_GPIO | PIN_OUTPUT_LOW, - - /* Backlight Enbale */ - GPIO224_GPIO | PIN_OUTPUT_HIGH, -}; -/* - * I2C - */ - -#define U5500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \ -static struct nmk_i2c_controller u5500_i2c##id##_data = { \ - /* \ - * slave data setup time, which is \ - * 250 ns,100ns,10ns which is 14,6,2 \ - * respectively for a 48 Mhz \ - * i2c clock \ - */ \ - .slsu = _slsu, \ - /* Tx FIFO threshold */ \ - .tft = _tft, \ - /* Rx FIFO threshold */ \ - .rft = _rft, \ - /* std. mode operation */ \ - .clk_freq = clk, \ - .sm = _sm, \ -} -/* - * The board uses TODO <3> i2c controllers, initialize all of - * them with slave data setup time of 250 ns, - * Tx & Rx FIFO threshold values as 1 and standard - * mode of operation - */ - -U5500_I2C_CONTROLLER(2, 0xe, 1, 1, 400000, I2C_FREQ_MODE_FAST); - -static struct lm3530_platform_data u5500_als_platform_data = { - .mode = LM3530_BL_MODE_MANUAL, - .als_input_mode = LM3530_INPUT_ALS1, - .max_current = LM3530_FS_CURR_26mA, - .pwm_pol_hi = true, - .als_avrg_time = LM3530_ALS_AVRG_TIME_512ms, - .brt_ramp_law = 1, /* Linear */ - .brt_ramp_fall = LM3530_RAMP_TIME_8s, - .brt_ramp_rise = LM3530_RAMP_TIME_8s, - .als1_resistor_sel = LM3530_ALS_IMPD_13_53kOhm, - .als2_resistor_sel = LM3530_ALS_IMPD_Z, - .als_vmin = 730, /* mV */ - .als_vmax = 1020, /* mV */ - .brt_val = 0x7F, /* Max brightness */ -}; - -static struct i2c_board_info __initdata u5500_i2c2_devices[] = { - { - /* Backlight */ - I2C_BOARD_INFO("lm3530-led", 0x36), - .platform_data = &u5500_als_platform_data, - }, -}; - -static void __init u5500_i2c_init(struct device *parent) -{ - db5500_add_i2c2(parent, &u5500_i2c2_data); - i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices)); -} - -static struct ab5500_platform_data ab5500_plf_data = { - .irq = { - .base = 0, - .count = 0, - }, - .init_settings = NULL, - .init_settings_sz = 0, - .pm_power_off = false, -}; - -static struct platform_device ab5500_device = { - .name = "ab5500-core", - .id = 0, - .dev = { - .platform_data = &ab5500_plf_data, - }, - .num_resources = 0, -}; - -static struct platform_device *u5500_platform_devices[] __initdata = { - &ab5500_device, -}; - -static void __init u5500_uart_init(struct device *parent) -{ - db5500_add_uart0(parent, NULL); - db5500_add_uart1(parent, NULL); - db5500_add_uart2(parent, NULL); -} - -static void __init u5500_init_machine(void) -{ - struct device *parent = NULL; - int i; - - parent = u5500_init_devices(); - nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins)); - - u5500_i2c_init(parent); - u5500_sdi_init(parent); - u5500_uart_init(parent); - - for (i = 0; i < ARRAY_SIZE(u5500_platform_devices); i++) - u5500_platform_devices[i]->dev.parent = parent; - - platform_add_devices(u5500_platform_devices, - ARRAY_SIZE(u5500_platform_devices)); -} - -MACHINE_START(U5500, "ST-Ericsson U5500 Platform") - .atag_offset = 0x100, - .map_io = u5500_map_io, - .init_irq = ux500_init_irq, - .timer = &ux500_timer, - .handle_irq = gic_handle_irq, - .init_machine = u5500_init_machine, -MACHINE_END diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 77a75ed0df67..df91344aa2db 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -36,9 +36,7 @@ static int __init ux500_l2x0_unlock(void) static int __init ux500_l2x0_init(void) { - if (cpu_is_u5500()) - l2x0_base = __io_address(U5500_L2CC_BASE); - else if (cpu_is_u8500()) + if (cpu_is_u8500()) l2x0_base = __io_address(U8500_L2CC_BASE); else ux500_unknown_soc(); diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index ec35f0aa5665..9feb6bc7f20e 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -149,9 +149,7 @@ static unsigned long clk_mtu_get_rate(struct clk *clk) unsigned long mturate; unsigned long retclk; - if (cpu_is_u5500()) - addr = __io_address(U5500_PRCMU_BASE); - else if (cpu_is_u8500()) + if (cpu_is_u8500()) addr = __io_address(U8500_PRCMU_BASE); else ux500_unknown_soc(); @@ -705,14 +703,6 @@ late_initcall(clk_init_smp_twd_cpufreq); int __init clk_init(void) { - if (cpu_is_u5500()) { - /* Clock tree for U5500 not implemented yet */ - clk_prcc_ops.enable = clk_prcc_ops.disable = NULL; - clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL; - clk_uartclk.rate = 36360000; - clk_sdmmcclk.rate = 99900000; - } - clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks)); clkdev_add(&clk_smp_twd_lookup); diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c deleted file mode 100644 index bca47f32082f..000000000000 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ /dev/null @@ -1,247 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/platform_device.h> -#include <linux/amba/bus.h> -#include <linux/io.h> -#include <linux/irq.h> - -#include <asm/mach/map.h> -#include <asm/pmu.h> - -#include <plat/gpio-nomadik.h> - -#include <mach/hardware.h> -#include <mach/devices.h> -#include <mach/setup.h> -#include <mach/irqs.h> -#include <mach/usb.h> - -#include "devices-db5500.h" -#include "ste-dma40-db5500.h" - -static struct map_desc u5500_uart_io_desc[] __initdata = { - __IO_DEV_DESC(U5500_UART0_BASE, SZ_4K), - __IO_DEV_DESC(U5500_UART2_BASE, SZ_4K), -}; - -static struct map_desc u5500_io_desc[] __initdata = { - /* SCU base also covers GIC CPU BASE and TWD with its 4K page */ - __IO_DEV_DESC(U5500_SCU_BASE, SZ_4K), - __IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K), - __IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K), - __IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K), - __IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K), - - __IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K), - __IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K), - __IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K), - __IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K), - __IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K), - __IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K), - __IO_DEV_DESC(U5500_PRCMU_TCDM_BASE, SZ_4K), -}; - -static struct resource mbox0_resources[] = { - { - .name = "mbox_peer", - .start = U5500_MBOX0_PEER_START, - .end = U5500_MBOX0_PEER_END, - .flags = IORESOURCE_MEM, - }, - { - .name = "mbox_local", - .start = U5500_MBOX0_LOCAL_START, - .end = U5500_MBOX0_LOCAL_END, - .flags = IORESOURCE_MEM, - }, - { - .name = "mbox_irq", - .start = MBOX_PAIR0_VIRT_IRQ, - .end = MBOX_PAIR0_VIRT_IRQ, - .flags = IORESOURCE_IRQ, - } -}; - -static struct resource mbox1_resources[] = { - { - .name = "mbox_peer", - .start = U5500_MBOX1_PEER_START, - .end = U5500_MBOX1_PEER_END, - .flags = IORESOURCE_MEM, - }, - { - .name = "mbox_local", - .start = U5500_MBOX1_LOCAL_START, - .end = U5500_MBOX1_LOCAL_END, - .flags = IORESOURCE_MEM, - }, - { - .name = "mbox_irq", - .start = MBOX_PAIR1_VIRT_IRQ, - .end = MBOX_PAIR1_VIRT_IRQ, - .flags = IORESOURCE_IRQ, - } -}; - -static struct resource mbox2_resources[] = { - { - .name = "mbox_peer", - .start = U5500_MBOX2_PEER_START, - .end = U5500_MBOX2_PEER_END, - .flags = IORESOURCE_MEM, - }, - { - .name = "mbox_local", - .start = U5500_MBOX2_LOCAL_START, - .end = U5500_MBOX2_LOCAL_END, - .flags = IORESOURCE_MEM, - }, - { - .name = "mbox_irq", - .start = MBOX_PAIR2_VIRT_IRQ, - .end = MBOX_PAIR2_VIRT_IRQ, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device mbox0_device = { - .id = 0, - .name = "mbox", - .resource = mbox0_resources, - .num_resources = ARRAY_SIZE(mbox0_resources), -}; - -static struct platform_device mbox1_device = { - .id = 1, - .name = "mbox", - .resource = mbox1_resources, - .num_resources = ARRAY_SIZE(mbox1_resources), -}; - -static struct platform_device mbox2_device = { - .id = 2, - .name = "mbox", - .resource = mbox2_resources, - .num_resources = ARRAY_SIZE(mbox2_resources), -}; - -static struct platform_device *db5500_platform_devs[] __initdata = { - &mbox0_device, - &mbox1_device, - &mbox2_device, -}; - -static resource_size_t __initdata db5500_gpio_base[] = { - U5500_GPIOBANK0_BASE, - U5500_GPIOBANK1_BASE, - U5500_GPIOBANK2_BASE, - U5500_GPIOBANK3_BASE, - U5500_GPIOBANK4_BASE, - U5500_GPIOBANK5_BASE, - U5500_GPIOBANK6_BASE, - U5500_GPIOBANK7_BASE, -}; - -static void __init db5500_add_gpios(struct device *parent) -{ - struct nmk_gpio_platform_data pdata = { - /* No custom data yet */ - }; - - dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base), - IRQ_DB5500_GPIO0, &pdata); -} - -void __init u5500_map_io(void) -{ - /* - * Map the UARTs early so that the DEBUG_LL stuff continues to work. - */ - iotable_init(u5500_uart_io_desc, ARRAY_SIZE(u5500_uart_io_desc)); - - ux500_map_io(); - - iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc)); - - _PRCMU_BASE = __io_address(U5500_PRCMU_BASE); -} - -static void __init db5500_pmu_init(void) -{ - struct resource res[] = { - [0] = { - .start = IRQ_DB5500_PMU0, - .end = IRQ_DB5500_PMU0, - .flags = IORESOURCE_IRQ, - }, - [1] = { - .start = IRQ_DB5500_PMU1, - .end = IRQ_DB5500_PMU1, - .flags = IORESOURCE_IRQ, - }, - }; - - platform_device_register_simple("arm-pmu", ARM_PMU_DEVICE_CPU, - res, ARRAY_SIZE(res)); -} - -static int usb_db5500_rx_dma_cfg[] = { - DB5500_DMA_DEV4_USB_OTG_IEP_1_9, - DB5500_DMA_DEV5_USB_OTG_IEP_2_10, - DB5500_DMA_DEV6_USB_OTG_IEP_3_11, - DB5500_DMA_DEV20_USB_OTG_IEP_4_12, - DB5500_DMA_DEV21_USB_OTG_IEP_5_13, - DB5500_DMA_DEV22_USB_OTG_IEP_6_14, - DB5500_DMA_DEV23_USB_OTG_IEP_7_15, - DB5500_DMA_DEV38_USB_OTG_IEP_8 -}; - -static int usb_db5500_tx_dma_cfg[] = { - DB5500_DMA_DEV4_USB_OTG_OEP_1_9, - DB5500_DMA_DEV5_USB_OTG_OEP_2_10, - DB5500_DMA_DEV6_USB_OTG_OEP_3_11, - DB5500_DMA_DEV20_USB_OTG_OEP_4_12, - DB5500_DMA_DEV21_USB_OTG_OEP_5_13, - DB5500_DMA_DEV22_USB_OTG_OEP_6_14, - DB5500_DMA_DEV23_USB_OTG_OEP_7_15, - DB5500_DMA_DEV38_USB_OTG_OEP_8 -}; - -static const char *db5500_read_soc_id(void) -{ - return kasprintf(GFP_KERNEL, "u5500 currently unsupported\n"); -} - -static struct device * __init db5500_soc_device_init(void) -{ - const char *soc_id = db5500_read_soc_id(); - - return ux500_soc_device_init(soc_id); -} - -struct device * __init u5500_init_devices(void) -{ - struct device *parent; - int i; - - parent = db5500_soc_device_init(); - - db5500_add_gpios(parent); - db5500_pmu_init(); - db5500_dma_init(parent); - db5500_add_rtc(parent); - db5500_add_usb(parent, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg); - - for (i = 0; i < ARRAY_SIZE(db5500_platform_devs); i++) - db5500_platform_devs[i]->dev.parent = parent; - - platform_add_devices(db5500_platform_devs, - ARRAY_SIZE(db5500_platform_devs)); - - return parent; -} diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index d11f3892a27d..4b4e59b30d81 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -10,7 +10,6 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/mfd/db8500-prcmu.h> -#include <linux/mfd/db5500-prcmu.h> #include <linux/clksrc-dbx500-prcmu.h> #include <linux/sys_soc.h> #include <linux/err.h> @@ -40,10 +39,7 @@ void __init ux500_init_irq(void) void __iomem *dist_base; void __iomem *cpu_base; - if (cpu_is_u5500()) { - dist_base = __io_address(U5500_GIC_DIST_BASE); - cpu_base = __io_address(U5500_GIC_CPU_BASE); - } else if (cpu_is_u8500()) { + if (cpu_is_u8500()) { dist_base = __io_address(U8500_GIC_DIST_BASE); cpu_base = __io_address(U8500_GIC_CPU_BASE); } else @@ -60,8 +56,6 @@ void __init ux500_init_irq(void) * Init clocks here so that they are available for system timer * initialization. */ - if (cpu_is_u5500()) - db5500_prcmu_early_init(); if (cpu_is_u8500()) db8500_prcmu_early_init(); clk_init(); diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h deleted file mode 100644 index e70955502c35..000000000000 --- a/arch/arm/mach-ux500/devices-db5500.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2. - */ - -#ifndef __DEVICES_DB5500_H -#define __DEVICES_DB5500_H - -#include "devices-common.h" - -#define db5500_add_i2c1(parent, pdata) \ - dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata) -#define db5500_add_i2c2(parent, pdata) \ - dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata) -#define db5500_add_i2c3(parent, pdata) \ - dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata) - -#define db5500_add_msp0_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \ - IRQ_DB5500_MSP0, pdata) -#define db5500_add_msp1_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \ - IRQ_DB5500_MSP1, pdata) -#define db5500_add_msp2_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \ - IRQ_DB5500_MSP2, pdata) - -#define db5500_add_msp0_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \ - IRQ_DB5500_MSP0, pdata) -#define db5500_add_msp1_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \ - IRQ_DB5500_MSP1, pdata) -#define db5500_add_msp2_spi(parent, pdata) \ - dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \ - IRQ_DB5500_MSP2, pdata) - -#define db5500_add_rtc(parent) \ - dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC); - -#define db5500_add_usb(parent, rx_cfg, tx_cfg) \ - ux500_add_usb(parent, U5500_USBOTG_BASE, \ - IRQ_DB5500_USBOTG, rx_cfg, tx_cfg) - -#define db5500_add_sdi0(parent, pdata) \ - dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \ - IRQ_DB5500_SDMMC0, pdata, \ - 0x10480180) -#define db5500_add_sdi1(parent, pdata) \ - dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \ - IRQ_DB5500_SDMMC1, pdata, \ - 0x10480180) -#define db5500_add_sdi2(parent, pdata) \ - dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \ - IRQ_DB5500_SDMMC2, pdata \ - 0x10480180) -#define db5500_add_sdi3(parent, pdata) \ - dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \ - IRQ_DB5500_SDMMC3, pdata \ - 0x10480180) -#define db5500_add_sdi4(parent, pdata) \ - dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \ - IRQ_DB5500_SDMMC4, pdata \ - 0x10480180) - -/* This one has a bad peripheral ID in the U5500 silicon */ -#define db5500_add_spi0(parent, pdata) \ - dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \ - IRQ_DB5500_SPI0, pdata, \ - 0x10080023) -#define db5500_add_spi1(parent, pdata) \ - dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \ - IRQ_DB5500_SPI1, pdata, \ - 0x10080023) -#define db5500_add_spi2(parent, pdata) \ - dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \ - IRQ_DB5500_SPI2, pdata \ - 0x10080023) -#define db5500_add_spi3(parent, pdata) \ - dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \ - IRQ_DB5500_SPI3, pdata \ - 0x10080023) - -#define db5500_add_uart0(parent, plat) \ - dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \ - IRQ_DB5500_UART0, plat) -#define db5500_add_uart1(parent, plat) \ - dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \ - IRQ_DB5500_UART1, plat) -#define db5500_add_uart2(parent, plat) \ - dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \ - IRQ_DB5500_UART2, plat) -#define db5500_add_uart3(parent, plat) \ - dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \ - IRQ_DB5500_UART3, plat) - -#endif diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c deleted file mode 100644 index 41e9470fa0e6..000000000000 --- a/arch/arm/mach-ux500/dma-db5500.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson - * Author: Rabin Vincent <rabinv.vincent@stericsson.com> for ST-Ericsson - * - * License terms: GNU General Public License (GPL), version 2 - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <plat/ste_dma40.h> -#include <mach/setup.h> -#include <mach/hardware.h> - -#include "ste-dma40-db5500.h" - -static struct resource dma40_resources[] = { - [0] = { - .start = U5500_DMA_BASE, - .end = U5500_DMA_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - .name = "base", - }, - [1] = { - .start = U5500_DMA_LCPA_BASE, - .end = U5500_DMA_LCPA_BASE + 2 * SZ_1K - 1, - .flags = IORESOURCE_MEM, - .name = "lcpa", - }, - [2] = { - .start = IRQ_DB5500_DMA, - .end = IRQ_DB5500_DMA, - .flags = IORESOURCE_IRQ - } -}; - -/* Default configuration for physical memcpy */ -static struct stedma40_chan_cfg dma40_memcpy_conf_phy = { - .mode = STEDMA40_MODE_PHYSICAL, - .dir = STEDMA40_MEM_TO_MEM, - - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .src_info.psize = STEDMA40_PSIZE_PHY_1, - .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, - - .dst_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.psize = STEDMA40_PSIZE_PHY_1, - .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, -}; - -/* Default configuration for logical memcpy */ -static struct stedma40_chan_cfg dma40_memcpy_conf_log = { - .dir = STEDMA40_MEM_TO_MEM, - - .src_info.data_width = STEDMA40_BYTE_WIDTH, - .src_info.psize = STEDMA40_PSIZE_LOG_1, - .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, - - .dst_info.data_width = STEDMA40_BYTE_WIDTH, - .dst_info.psize = STEDMA40_PSIZE_LOG_1, - .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, -}; - -/* - * Mapping between soruce event lines and physical device address This was - * created assuming that the event line is tied to a device and therefore the - * address is constant, however this is not true for at least USB, and the - * values are just placeholders for USB. This table is preserved and used for - * now. - */ -static const dma_addr_t dma40_rx_map[DB5500_DMA_NR_DEV] = { - [DB5500_DMA_DEV24_SDMMC0_RX] = -1, - [DB5500_DMA_DEV38_USB_OTG_IEP_8] = -1, - [DB5500_DMA_DEV23_USB_OTG_IEP_7_15] = -1, - [DB5500_DMA_DEV22_USB_OTG_IEP_6_14] = -1, - [DB5500_DMA_DEV21_USB_OTG_IEP_5_13] = -1, - [DB5500_DMA_DEV20_USB_OTG_IEP_4_12] = -1, - [DB5500_DMA_DEV6_USB_OTG_IEP_3_11] = -1, - [DB5500_DMA_DEV5_USB_OTG_IEP_2_10] = -1, - [DB5500_DMA_DEV4_USB_OTG_IEP_1_9] = -1, -}; - -/* Mapping between destination event lines and physical device address */ -static const dma_addr_t dma40_tx_map[DB5500_DMA_NR_DEV] = { - [DB5500_DMA_DEV24_SDMMC0_TX] = -1, - [DB5500_DMA_DEV38_USB_OTG_OEP_8] = -1, - [DB5500_DMA_DEV23_USB_OTG_OEP_7_15] = -1, - [DB5500_DMA_DEV22_USB_OTG_OEP_6_14] = -1, - [DB5500_DMA_DEV21_USB_OTG_OEP_5_13] = -1, - [DB5500_DMA_DEV20_USB_OTG_OEP_4_12] = -1, - [DB5500_DMA_DEV6_USB_OTG_OEP_3_11] = -1, - [DB5500_DMA_DEV5_USB_OTG_OEP_2_10] = -1, - [DB5500_DMA_DEV4_USB_OTG_OEP_1_9] = -1, -}; - -static int dma40_memcpy_event[] = { - DB5500_DMA_MEMCPY_TX_1, - DB5500_DMA_MEMCPY_TX_2, - DB5500_DMA_MEMCPY_TX_3, - DB5500_DMA_MEMCPY_TX_4, - DB5500_DMA_MEMCPY_TX_5, -}; - -static struct stedma40_platform_data dma40_plat_data = { - .dev_len = ARRAY_SIZE(dma40_rx_map), - .dev_rx = dma40_rx_map, - .dev_tx = dma40_tx_map, - .memcpy = dma40_memcpy_event, - .memcpy_len = ARRAY_SIZE(dma40_memcpy_event), - .memcpy_conf_phy = &dma40_memcpy_conf_phy, - .memcpy_conf_log = &dma40_memcpy_conf_log, - .disabled_channels = {-1}, -}; - -static struct platform_device dma40_device = { - .dev = { - .platform_data = &dma40_plat_data, - }, - .name = "dma40", - .id = 0, - .num_resources = ARRAY_SIZE(dma40_resources), - .resource = dma40_resources -}; - -void __init db5500_dma_init(struct device *parent) -{ - int ret; - - dma40_device.dev.parent = parent; - ret = platform_device_register(&dma40_device); - if (ret) - dev_err(&dma40_device.dev, "unable to register device: %d\n", ret); - -} diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h deleted file mode 100644 index 8e714bcb099f..000000000000 --- a/arch/arm/mach-ux500/include/mach/db5500-regs.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_DB5500_REGS_H -#define __MACH_DB5500_REGS_H - -#define U5500_PER1_BASE 0xA0020000 -#define U5500_PER2_BASE 0xA0010000 -#define U5500_PER3_BASE 0x80140000 -#define U5500_PER4_BASE 0x80150000 -#define U5500_PER5_BASE 0x80100000 -#define U5500_PER6_BASE 0x80120000 - -#define U5500_GIC_DIST_BASE 0xA0411000 -#define U5500_GIC_CPU_BASE 0xA0410100 -#define U5500_DMA_BASE 0x90030000 -#define U5500_STM_BASE 0x90020000 -#define U5500_STM_REG_BASE (U5500_STM_BASE + 0xF000) -#define U5500_MCDE_BASE 0xA0400000 -#define U5500_MODEM_BASE 0xB0000000 -#define U5500_L2CC_BASE 0xA0412000 -#define U5500_SCU_BASE 0xA0410000 -#define U5500_DSI1_BASE 0xA0401000 -#define U5500_DSI2_BASE 0xA0402000 -#define U5500_SIA_BASE 0xA0100000 -#define U5500_SVA_BASE 0x80200000 -#define U5500_HSEM_BASE 0xA0000000 -#define U5500_NAND0_BASE 0x60000000 -#define U5500_NAND1_BASE 0x70000000 -#define U5500_TWD_BASE 0xa0410600 -#define U5500_ICN_BASE 0xA0040000 -#define U5500_B2R2_BASE 0xa0200000 -#define U5500_BOOT_ROM_BASE 0x90000000 - -#define U5500_FSMC_BASE (U5500_PER1_BASE + 0x0000) -#define U5500_SDI0_BASE (U5500_PER1_BASE + 0x1000) -#define U5500_SDI2_BASE (U5500_PER1_BASE + 0x2000) -#define U5500_UART0_BASE (U5500_PER1_BASE + 0x3000) -#define U5500_I2C1_BASE (U5500_PER1_BASE + 0x4000) -#define U5500_MSP0_BASE (U5500_PER1_BASE + 0x5000) -#define U5500_GPIO0_BASE (U5500_PER1_BASE + 0xE000) -#define U5500_CLKRST1_BASE (U5500_PER1_BASE + 0xF000) - -#define U5500_USBOTG_BASE (U5500_PER2_BASE + 0x0000) -#define U5500_GPIO1_BASE (U5500_PER2_BASE + 0xE000) -#define U5500_CLKRST2_BASE (U5500_PER2_BASE + 0xF000) - -#define U5500_KEYPAD_BASE (U5500_PER3_BASE + 0x0000) -#define U5500_PWM_BASE (U5500_PER3_BASE + 0x1000) -#define U5500_GPIO3_BASE (U5500_PER3_BASE + 0xE000) -#define U5500_CLKRST3_BASE (U5500_PER3_BASE + 0xF000) - -#define U5500_BACKUPRAM0_BASE (U5500_PER4_BASE + 0x0000) -#define U5500_BACKUPRAM1_BASE (U5500_PER4_BASE + 0x1000) -#define U5500_RTT0_BASE (U5500_PER4_BASE + 0x2000) -#define U5500_RTT1_BASE (U5500_PER4_BASE + 0x3000) -#define U5500_RTC_BASE (U5500_PER4_BASE + 0x4000) -#define U5500_SCR_BASE (U5500_PER4_BASE + 0x5000) -#define U5500_DMC_BASE (U5500_PER4_BASE + 0x6000) -#define U5500_PRCMU_BASE (U5500_PER4_BASE + 0x7000) -#define U5500_PRCMU_TIMER_3_BASE (U5500_PER4_BASE + 0x07338) -#define U5500_PRCMU_TIMER_4_BASE (U5500_PER4_BASE + 0x07450) -#define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000) -#define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000) -#define U5500_MTIMER_BASE (U5500_PER4_BASE + 0xC000) -#define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000) -#define U5500_PRCMU_TCDM_BASE (U5500_PER4_BASE + 0x18000) -#define U5500_PRCMU_TCPM_BASE (U5500_PER4_BASE + 0x10000) -#define U5500_TPIU_BASE (U5500_PER4_BASE + 0x50000) - -#define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000) -#define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000) -#define U5500_SPI2_BASE (U5500_PER5_BASE + 0x2000) -#define U5500_SPI3_BASE (U5500_PER5_BASE + 0x3000) -#define U5500_UART1_BASE (U5500_PER5_BASE + 0x4000) -#define U5500_UART2_BASE (U5500_PER5_BASE + 0x5000) -#define U5500_UART3_BASE (U5500_PER5_BASE + 0x6000) -#define U5500_SDI1_BASE (U5500_PER5_BASE + 0x7000) -#define U5500_SDI3_BASE (U5500_PER5_BASE + 0x8000) -#define U5500_SDI4_BASE (U5500_PER5_BASE + 0x9000) -#define U5500_I2C2_BASE (U5500_PER5_BASE + 0xA000) -#define U5500_I2C3_BASE (U5500_PER5_BASE + 0xB000) -#define U5500_MSP2_BASE (U5500_PER5_BASE + 0xC000) -#define U5500_IRDA_BASE (U5500_PER5_BASE + 0xD000) -#define U5500_IRRC_BASE (U5500_PER5_BASE + 0x10000) -#define U5500_GPIO4_BASE (U5500_PER5_BASE + 0x1E000) -#define U5500_CLKRST5_BASE (U5500_PER5_BASE + 0x1F000) - -#define U5500_RNG_BASE (U5500_PER6_BASE + 0x0000) -#define U5500_HASH0_BASE (U5500_PER6_BASE + 0x1000) -#define U5500_HASH1_BASE (U5500_PER6_BASE + 0x2000) -#define U5500_PKA_BASE (U5500_PER6_BASE + 0x4000) -#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5100) -#define U5500_MTU0_BASE (U5500_PER6_BASE + 0x6000) -#define U5500_MTU1_BASE (U5500_PER6_BASE + 0x7000) -#define U5500_CR_BASE (U5500_PER6_BASE + 0x8000) -#define U5500_CRYP0_BASE (U5500_PER6_BASE + 0xA000) -#define U5500_CRYP1_BASE (U5500_PER6_BASE + 0xB000) -#define U5500_CLKRST6_BASE (U5500_PER6_BASE + 0xF000) - -#define U5500_GPIOBANK0_BASE U5500_GPIO0_BASE -#define U5500_GPIOBANK1_BASE (U5500_GPIO0_BASE + 0x80) -#define U5500_GPIOBANK2_BASE U5500_GPIO1_BASE -#define U5500_GPIOBANK3_BASE U5500_GPIO2_BASE -#define U5500_GPIOBANK4_BASE U5500_GPIO3_BASE -#define U5500_GPIOBANK5_BASE U5500_GPIO4_BASE -#define U5500_GPIOBANK6_BASE (U5500_GPIO4_BASE + 0x80) -#define U5500_GPIOBANK7_BASE (U5500_GPIO4_BASE + 0x100) - -#define U5500_MBOX_BASE (U5500_MODEM_BASE + 0xFFD1000) -#define U5500_MBOX0_PEER_START (U5500_MBOX_BASE + 0x40) -#define U5500_MBOX0_PEER_END (U5500_MBOX_BASE + 0x5F) -#define U5500_MBOX0_LOCAL_START (U5500_MBOX_BASE + 0x60) -#define U5500_MBOX0_LOCAL_END (U5500_MBOX_BASE + 0x7F) -#define U5500_MBOX1_PEER_START (U5500_MBOX_BASE + 0x80) -#define U5500_MBOX1_PEER_END (U5500_MBOX_BASE + 0x9F) -#define U5500_MBOX1_LOCAL_START (U5500_MBOX_BASE + 0xA0) -#define U5500_MBOX1_LOCAL_END (U5500_MBOX_BASE + 0xBF) -#define U5500_MBOX2_PEER_START (U5500_MBOX_BASE + 0x00) -#define U5500_MBOX2_PEER_END (U5500_MBOX_BASE + 0x1F) -#define U5500_MBOX2_LOCAL_START (U5500_MBOX_BASE + 0x20) -#define U5500_MBOX2_LOCAL_END (U5500_MBOX_BASE + 0x3F) - -#define U5500_ACCCON_BASE_SEC (0xBFFF0000) -#define U5500_ACCCON_BASE (0xBFFF1000) -#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020) -#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC) -#define U5500_INTCON_MBOX1_INT_RESET_ADDR (0xBFFD31A4) - -#define U5500_ESRAM_BASE 0x40000000 -#define U5500_ESRAM_DMA_LCPA_OFFSET 0x10000 -#define U5500_DMA_LCPA_BASE (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET) - -#define U5500_MCDE_SIZE 0x1000 -#define U5500_DSI_LINK_SIZE 0x1000 -#define U5500_DSI_LINK_COUNT 0x2 -#define U5500_DSI_LINK1_BASE (U5500_MCDE_BASE + U5500_MCDE_SIZE) -#define U5500_DSI_LINK2_BASE (U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE) - -#endif diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S index 8d74d927d4e2..67035223334a 100644 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ b/arch/arm/mach-ux500/include/mach/debug-macro.S @@ -20,10 +20,6 @@ * built, so that there's some hint during the build that something is wrong. */ -#ifdef CONFIG_UX500_SOC_DB5500 -#define __UX500_UART(n) U5500_UART##n##_BASE -#endif - #ifdef CONFIG_UX500_SOC_DB8500 #define __UX500_UART(n) U8500_UART##n##_BASE #endif diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h index 5f6cb71fc62d..9b5eb69a0154 100644 --- a/arch/arm/mach-ux500/include/mach/devices.h +++ b/arch/arm/mach-ux500/include/mach/devices.h @@ -10,7 +10,6 @@ struct platform_device; struct amba_device; -extern struct platform_device u5500_gpio_devs[]; extern struct platform_device u8500_gpio_devs[]; extern struct amba_device ux500_pl031_device; diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index f84698936d36..cf6fac3d1eeb 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -28,7 +28,6 @@ #define io_p2v(n) __io_address(n) #include <mach/db8500-regs.h> -#include <mach/db5500-regs.h> #define MSP_TX_RX_REG_OFFSET 0 diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h deleted file mode 100644 index 29d972c7717b..000000000000 --- a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_IRQS_BOARD_U5500_H -#define __MACH_IRQS_BOARD_U5500_H - -#define AB5500_NR_IRQS 5 -#define IRQ_AB5500_BASE IRQ_BOARD_START -#define IRQ_AB5500_END (IRQ_AB5500_BASE + AB5500_NR_IRQS) - -#define U5500_IRQ_END IRQ_AB5500_END - -#if IRQ_BOARD_END < U5500_IRQ_END -#undef IRQ_BOARD_END -#define IRQ_BOARD_END U5500_IRQ_END -#endif - -#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h deleted file mode 100644 index 77239776a6f2..000000000000 --- a/arch/arm/mach-ux500/include/mach/irqs-db5500.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __MACH_IRQS_DB5500_H -#define __MACH_IRQS_DB5500_H - -#define IRQ_DB5500_MTU0 (IRQ_SHPI_START + 4) -#define IRQ_DB5500_SPI2 (IRQ_SHPI_START + 6) -#define IRQ_DB5500_PMU0 (IRQ_SHPI_START + 7) -#define IRQ_DB5500_SPI0 (IRQ_SHPI_START + 8) -#define IRQ_DB5500_RTT (IRQ_SHPI_START + 9) -#define IRQ_DB5500_PKA (IRQ_SHPI_START + 10) -#define IRQ_DB5500_UART0 (IRQ_SHPI_START + 11) -#define IRQ_DB5500_I2C3 (IRQ_SHPI_START + 12) -#define IRQ_DB5500_L2CC (IRQ_SHPI_START + 13) -#define IRQ_DB5500_MSP0 (IRQ_SHPI_START + 14) -#define IRQ_DB5500_CRYP1 (IRQ_SHPI_START + 15) -#define IRQ_DB5500_PMU1 (IRQ_SHPI_START + 16) -#define IRQ_DB5500_MTU1 (IRQ_SHPI_START + 17) -#define IRQ_DB5500_RTC (IRQ_SHPI_START + 18) -#define IRQ_DB5500_UART1 (IRQ_SHPI_START + 19) -#define IRQ_DB5500_USB_WAKEUP (IRQ_SHPI_START + 20) -#define IRQ_DB5500_I2C0 (IRQ_SHPI_START + 21) -#define IRQ_DB5500_I2C1 (IRQ_SHPI_START + 22) -#define IRQ_DB5500_USBOTG (IRQ_SHPI_START + 23) -#define IRQ_DB5500_DMA_SECURE (IRQ_SHPI_START + 24) -#define IRQ_DB5500_DMA (IRQ_SHPI_START + 25) -#define IRQ_DB5500_UART2 (IRQ_SHPI_START + 26) -#define IRQ_DB5500_ICN_PMU1 (IRQ_SHPI_START + 27) -#define IRQ_DB5500_ICN_PMU2 (IRQ_SHPI_START + 28) -#define IRQ_DB5500_UART3 (IRQ_SHPI_START + 29) -#define IRQ_DB5500_SPI3 (IRQ_SHPI_START + 30) -#define IRQ_DB5500_SDMMC4 (IRQ_SHPI_START + 31) -#define IRQ_DB5500_IRRC (IRQ_SHPI_START + 33) -#define IRQ_DB5500_IRDA_FT (IRQ_SHPI_START + 34) -#define IRQ_DB5500_IRDA_SD (IRQ_SHPI_START + 35) -#define IRQ_DB5500_IRDA_FI (IRQ_SHPI_START + 36) -#define IRQ_DB5500_IRDA_FD (IRQ_SHPI_START + 37) -#define IRQ_DB5500_FSMC_CODEREADY (IRQ_SHPI_START + 38) -#define IRQ_DB5500_FSMC_NANDWAIT (IRQ_SHPI_START + 39) -#define IRQ_DB5500_AB5500 (IRQ_SHPI_START + 40) -#define IRQ_DB5500_SDMMC2 (IRQ_SHPI_START + 41) -#define IRQ_DB5500_SIA (IRQ_SHPI_START + 42) -#define IRQ_DB5500_SIA2 (IRQ_SHPI_START + 43) -#define IRQ_DB5500_HVA (IRQ_SHPI_START + 44) -#define IRQ_DB5500_HVA2 (IRQ_SHPI_START + 45) -#define IRQ_DB5500_PRCMU0 (IRQ_SHPI_START + 46) -#define IRQ_DB5500_PRCMU1 (IRQ_SHPI_START + 47) -#define IRQ_DB5500_DISP (IRQ_SHPI_START + 48) -#define IRQ_DB5500_SDMMC1 (IRQ_SHPI_START + 50) -#define IRQ_DB5500_MSP1 (IRQ_SHPI_START + 52) -#define IRQ_DB5500_KBD (IRQ_SHPI_START + 53) -#define IRQ_DB5500_I2C2 (IRQ_SHPI_START + 55) -#define IRQ_DB5500_B2R2 (IRQ_SHPI_START + 56) -#define IRQ_DB5500_CRYP0 (IRQ_SHPI_START + 57) -#define IRQ_DB5500_SDMMC3 (IRQ_SHPI_START + 59) -#define IRQ_DB5500_SDMMC0 (IRQ_SHPI_START + 60) -#define IRQ_DB5500_HSEM (IRQ_SHPI_START + 61) -#define IRQ_DB5500_SBAG (IRQ_SHPI_START + 63) -#define IRQ_DB5500_MODEM (IRQ_SHPI_START + 65) -#define IRQ_DB5500_SPI1 (IRQ_SHPI_START + 96) -#define IRQ_DB5500_MSP2 (IRQ_SHPI_START + 98) -#define IRQ_DB5500_SRPTIMER (IRQ_SHPI_START + 101) -#define IRQ_DB5500_CTI0 (IRQ_SHPI_START + 108) -#define IRQ_DB5500_CTI1 (IRQ_SHPI_START + 109) -#define IRQ_DB5500_ICN_ERR (IRQ_SHPI_START + 110) -#define IRQ_DB5500_MALI_PPMMU (IRQ_SHPI_START + 112) -#define IRQ_DB5500_MALI_PP (IRQ_SHPI_START + 113) -#define IRQ_DB5500_MALI_GPMMU (IRQ_SHPI_START + 114) -#define IRQ_DB5500_MALI_GP (IRQ_SHPI_START + 115) -#define IRQ_DB5500_MALI (IRQ_SHPI_START + 116) -#define IRQ_DB5500_PRCMU_SEM (IRQ_SHPI_START + 118) -#define IRQ_DB5500_GPIO0 (IRQ_SHPI_START + 119) -#define IRQ_DB5500_GPIO1 (IRQ_SHPI_START + 120) -#define IRQ_DB5500_GPIO2 (IRQ_SHPI_START + 121) -#define IRQ_DB5500_GPIO3 (IRQ_SHPI_START + 122) -#define IRQ_DB5500_GPIO4 (IRQ_SHPI_START + 123) -#define IRQ_DB5500_GPIO5 (IRQ_SHPI_START + 124) -#define IRQ_DB5500_GPIO6 (IRQ_SHPI_START + 125) -#define IRQ_DB5500_GPIO7 (IRQ_SHPI_START + 126) - -#ifdef CONFIG_UX500_SOC_DB5500 - -/* - * After the GPIO ones we reserve a range of IRQ:s in which virtual - * IRQ:s representing modem IRQ:s can be allocated - */ -#define IRQ_MODEM_EVENTS_BASE IRQ_SOC_START -#define IRQ_MODEM_EVENTS_NBR 72 -#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR) - -/* List of virtual IRQ:s that are allocated from the range above */ -#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43) -#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45) -#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41) - -/* - * We may have several SoCs, but only one will run at a - * time, so the one with most IRQs will bump this ahead, - * but the IRQ_SOC_START remains the same for either SoC. - */ -#if IRQ_SOC_END < IRQ_MODEM_EVENTS_END -#undef IRQ_SOC_END -#define IRQ_SOC_END IRQ_MODEM_EVENTS_END -#endif - -#endif /* CONFIG_UX500_SOC_DB5500 */ - -#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index c23a6b5f0c4e..d06dcf6208fa 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -36,7 +36,6 @@ /* This will be overridden by SoC-specific irq headers */ #define IRQ_SOC_END IRQ_SOC_START -#include <mach/irqs-db5500.h> #include <mach/irqs-db8500.h> #define IRQ_BOARD_START IRQ_SOC_END @@ -47,10 +46,6 @@ #include <mach/irqs-board-mop500.h> #endif -#ifdef CONFIG_MACH_U5500 -#include <mach/irqs-board-u5500.h> -#endif - #define NR_IRQS IRQ_BOARD_END #endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-ux500/include/mach/mbox-db5500.h b/arch/arm/mach-ux500/include/mach/mbox-db5500.h deleted file mode 100644 index 7f9da4d2fbda..000000000000 --- a/arch/arm/mach-ux500/include/mach/mbox-db5500.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson. - * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson. - * License terms: GNU General Public License (GPL), version 2. - */ - -#ifndef __INC_STE_MBOX_H -#define __INC_STE_MBOX_H - -#define MBOX_BUF_SIZE 16 -#define MBOX_NAME_SIZE 8 - -/** - * mbox_recv_cb_t - Definition of the mailbox callback. - * @mbox_msg: The mailbox message. - * @priv: The clients private data as specified in the call to mbox_setup. - * - * This function will be called upon reception of new mailbox messages. - */ -typedef void mbox_recv_cb_t (u32 mbox_msg, void *priv); - -/** - * struct mbox - Mailbox instance struct - * @list: Linked list head. - * @pdev: Pointer to device struct. - * @cb: Callback function. Will be called - * when new data is received. - * @client_data: Clients private data. Will be sent back - * in the callback function. - * @virtbase_peer: Virtual address for outgoing mailbox. - * @virtbase_local: Virtual address for incoming mailbox. - * @buffer: Then internal queue for outgoing messages. - * @name: Name of this mailbox. - * @buffer_available: Completion variable to achieve "blocking send". - * This variable will be signaled when there is - * internal buffer space available. - * @client_blocked: To keep track if any client is currently - * blocked. - * @lock: Spinlock to protect this mailbox instance. - * @write_index: Index in internal buffer to write to. - * @read_index: Index in internal buffer to read from. - * @allocated: Indicates whether this particular mailbox - * id has been allocated by someone. - */ -struct mbox { - struct list_head list; - struct platform_device *pdev; - mbox_recv_cb_t *cb; - void *client_data; - void __iomem *virtbase_peer; - void __iomem *virtbase_local; - u32 buffer[MBOX_BUF_SIZE]; - char name[MBOX_NAME_SIZE]; - struct completion buffer_available; - u8 client_blocked; - spinlock_t lock; - u8 write_index; - u8 read_index; - bool allocated; -}; - -/** - * mbox_setup - Set up a mailbox and return its instance. - * @mbox_id: The ID number of the mailbox. 0 or 1 for modem CPU, - * 2 for modem DSP. - * @mbox_cb: Pointer to the callback function to be called when a new message - * is received. - * @priv: Client user data which will be returned in the callback. - * - * Returns a mailbox instance to be specified in subsequent calls to mbox_send. - */ -struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv); - -/** - * mbox_send - Send a mailbox message. - * @mbox: Mailbox instance (returned by mbox_setup) - * @mbox_msg: The mailbox message to send. - * @block: Specifies whether this call will block until send is possible, - * or return an error if the mailbox buffer is full. - * - * Returns 0 on success or a negative error code on error. -ENOMEM indicates - * that the internal buffer is full and you have to try again later (or - * specify "block" in order to block until send is possible). - */ -int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block); - -#endif /*INC_STE_MBOX_H*/ diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index 3dc00ffa7bfa..4e369f1645ec 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -15,18 +15,12 @@ #include <linux/init.h> void __init ux500_map_io(void); -extern void __init u5500_map_io(void); extern void __init u8500_map_io(void); -extern struct device * __init u5500_init_devices(void); extern struct device * __init u8500_init_devices(void); extern void __init ux500_init_irq(void); -extern void __init u5500_sdi_init(struct device *parent); - -extern void __init db5500_dma_init(struct device *parent); - extern struct device *ux500_soc_device_init(const char *soc_id); struct amba_device; diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h index 6fb3c4b0105d..34775baadaea 100644 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ b/arch/arm/mach-ux500/include/mach/uncompress.h @@ -50,11 +50,8 @@ static void flush(void) static inline void arch_decomp_setup(void) { - /* Check in run time if we run on an U8500 or U5500 */ - if (machine_is_u5500()) - ux500_uart_base = U5500_UART0_BASE; - else - ux500_uart_base = U8500_UART2_BASE; + /* Use machine_is_foo() macro if you need to switch base someday */ + ux500_uart_base = U8500_UART2_BASE; } #define arch_decomp_wdog() /* nothing to do here */ diff --git a/arch/arm/mach-ux500/mbox-db5500.c b/arch/arm/mach-ux500/mbox-db5500.c deleted file mode 100644 index 0127490218cd..000000000000 --- a/arch/arm/mach-ux500/mbox-db5500.c +++ /dev/null @@ -1,565 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson. - * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson. - * License terms: GNU General Public License (GPL), version 2. - */ - -/* - * Mailbox nomenclature: - * - * APE MODEM - * mbox pairX - * .......................... - * . . - * . peer . - * . send ---- . - * . --> | | . - * . | | . - * . ---- . - * . . - * . local . - * . rec ---- . - * . | | <-- . - * . | | . - * . ---- . - * ......................... - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/errno.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/completion.h> -#include <mach/mbox-db5500.h> - -#define MBOX_NAME "mbox" - -#define MBOX_FIFO_DATA 0x000 -#define MBOX_FIFO_ADD 0x004 -#define MBOX_FIFO_REMOVE 0x008 -#define MBOX_FIFO_THRES_FREE 0x00C -#define MBOX_FIFO_THRES_OCCUP 0x010 -#define MBOX_FIFO_STATUS 0x014 - -#define MBOX_DISABLE_IRQ 0x4 -#define MBOX_ENABLE_IRQ 0x0 -#define MBOX_LATCH 1 - -/* Global list of all mailboxes */ -static struct list_head mboxs = LIST_HEAD_INIT(mboxs); - -static struct mbox *get_mbox_with_id(u8 id) -{ - u8 i; - struct list_head *pos = &mboxs; - for (i = 0; i <= id; i++) - pos = pos->next; - - return (struct mbox *) list_entry(pos, struct mbox, list); -} - -int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block) -{ - int res = 0; - - spin_lock(&mbox->lock); - - dev_dbg(&(mbox->pdev->dev), - "About to buffer 0x%X to mailbox 0x%X." - " ri = %d, wi = %d\n", - mbox_msg, (u32)mbox, mbox->read_index, - mbox->write_index); - - /* Check if write buffer is full */ - while (((mbox->write_index + 1) % MBOX_BUF_SIZE) == mbox->read_index) { - if (!block) { - dev_dbg(&(mbox->pdev->dev), - "Buffer full in non-blocking call! " - "Returning -ENOMEM!\n"); - res = -ENOMEM; - goto exit; - } - spin_unlock(&mbox->lock); - dev_dbg(&(mbox->pdev->dev), - "Buffer full in blocking call! Sleeping...\n"); - mbox->client_blocked = 1; - wait_for_completion(&mbox->buffer_available); - dev_dbg(&(mbox->pdev->dev), - "Blocking send was woken up! Trying again...\n"); - spin_lock(&mbox->lock); - } - - mbox->buffer[mbox->write_index] = mbox_msg; - mbox->write_index = (mbox->write_index + 1) % MBOX_BUF_SIZE; - - /* - * Indicate that we want an IRQ as soon as there is a slot - * in the FIFO - */ - writel(MBOX_ENABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); - -exit: - spin_unlock(&mbox->lock); - return res; -} -EXPORT_SYMBOL(mbox_send); - -#if defined(CONFIG_DEBUG_FS) -/* - * Expected input: <value> <nbr sends> - * Example: "echo 0xdeadbeef 4 > mbox-node" sends 0xdeadbeef 4 times - */ -static ssize_t mbox_write_fifo(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t count) -{ - unsigned long mbox_mess; - unsigned long nbr_sends; - unsigned long i; - char int_buf[16]; - char *token; - char *val; - - struct mbox *mbox = (struct mbox *) dev->platform_data; - - strncpy((char *) &int_buf, buf, sizeof(int_buf)); - token = (char *) &int_buf; - - /* Parse message */ - val = strsep(&token, " "); - if ((val == NULL) || (strict_strtoul(val, 16, &mbox_mess) != 0)) - mbox_mess = 0xDEADBEEF; - - val = strsep(&token, " "); - if ((val == NULL) || (strict_strtoul(val, 10, &nbr_sends) != 0)) - nbr_sends = 1; - - dev_dbg(dev, "Will write 0x%lX %ld times using data struct at 0x%X\n", - mbox_mess, nbr_sends, (u32) mbox); - - for (i = 0; i < nbr_sends; i++) - mbox_send(mbox, mbox_mess, true); - - return count; -} - -static ssize_t mbox_read_fifo(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - int mbox_value; - struct mbox *mbox = (struct mbox *) dev->platform_data; - - if ((readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7) <= 0) - return sprintf(buf, "Mailbox is empty\n"); - - mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA); - writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE)); - - return sprintf(buf, "0x%X\n", mbox_value); -} - -static DEVICE_ATTR(fifo, S_IWUSR | S_IRUGO, mbox_read_fifo, mbox_write_fifo); - -static int mbox_show(struct seq_file *s, void *data) -{ - struct list_head *pos; - u8 mbox_index = 0; - - list_for_each(pos, &mboxs) { - struct mbox *m = - (struct mbox *) list_entry(pos, struct mbox, list); - if (m == NULL) { - seq_printf(s, - "Unable to retrieve mailbox %d\n", - mbox_index); - continue; - } - - spin_lock(&m->lock); - if ((m->virtbase_peer == NULL) || (m->virtbase_local == NULL)) { - seq_printf(s, "MAILBOX %d not setup or corrupt\n", - mbox_index); - spin_unlock(&m->lock); - continue; - } - - seq_printf(s, - "===========================\n" - " MAILBOX %d\n" - " PEER MAILBOX DUMP\n" - "---------------------------\n" - "FIFO: 0x%X (%d)\n" - "Free Threshold: 0x%.2X (%d)\n" - "Occupied Threshold: 0x%.2X (%d)\n" - "Status: 0x%.2X (%d)\n" - " Free spaces (ot): %d (%d)\n" - " Occup spaces (ot): %d (%d)\n" - "===========================\n" - " LOCAL MAILBOX DUMP\n" - "---------------------------\n" - "FIFO: 0x%.X (%d)\n" - "Free Threshold: 0x%.2X (%d)\n" - "Occupied Threshold: 0x%.2X (%d)\n" - "Status: 0x%.2X (%d)\n" - " Free spaces (ot): %d (%d)\n" - " Occup spaces (ot): %d (%d)\n" - "===========================\n" - "write_index: %d\n" - "read_index : %d\n" - "===========================\n" - "\n", - mbox_index, - readl(m->virtbase_peer + MBOX_FIFO_DATA), - readl(m->virtbase_peer + MBOX_FIFO_DATA), - readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE), - readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE), - readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP), - readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP), - readl(m->virtbase_peer + MBOX_FIFO_STATUS), - readl(m->virtbase_peer + MBOX_FIFO_STATUS), - (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 4) & 0x7, - (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 7) & 0x1, - (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 0) & 0x7, - (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 3) & 0x1, - readl(m->virtbase_local + MBOX_FIFO_DATA), - readl(m->virtbase_local + MBOX_FIFO_DATA), - readl(m->virtbase_local + MBOX_FIFO_THRES_FREE), - readl(m->virtbase_local + MBOX_FIFO_THRES_FREE), - readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP), - readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP), - readl(m->virtbase_local + MBOX_FIFO_STATUS), - readl(m->virtbase_local + MBOX_FIFO_STATUS), - (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 4) & 0x7, - (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 7) & 0x1, - (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 0) & 0x7, - (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 3) & 0x1, - m->write_index, m->read_index); - mbox_index++; - spin_unlock(&m->lock); - } - - return 0; -} - -static int mbox_open(struct inode *inode, struct file *file) -{ - return single_open(file, mbox_show, NULL); -} - -static const struct file_operations mbox_operations = { - .owner = THIS_MODULE, - .open = mbox_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; -#endif - -static irqreturn_t mbox_irq(int irq, void *arg) -{ - u32 mbox_value; - int nbr_occup; - int nbr_free; - struct mbox *mbox = (struct mbox *) arg; - - spin_lock(&mbox->lock); - - dev_dbg(&(mbox->pdev->dev), - "mbox IRQ [%d] received. ri = %d, wi = %d\n", - irq, mbox->read_index, mbox->write_index); - - /* - * Check if we have any outgoing messages, and if there is space for - * them in the FIFO. - */ - if (mbox->read_index != mbox->write_index) { - /* - * Check by reading FREE for LOCAL since that indicates - * OCCUP for PEER - */ - nbr_free = (readl(mbox->virtbase_local + MBOX_FIFO_STATUS) - >> 4) & 0x7; - dev_dbg(&(mbox->pdev->dev), - "Status indicates %d empty spaces in the FIFO!\n", - nbr_free); - - while ((nbr_free > 0) && - (mbox->read_index != mbox->write_index)) { - /* Write the message and latch it into the FIFO */ - writel(mbox->buffer[mbox->read_index], - (mbox->virtbase_peer + MBOX_FIFO_DATA)); - writel(MBOX_LATCH, - (mbox->virtbase_peer + MBOX_FIFO_ADD)); - dev_dbg(&(mbox->pdev->dev), - "Wrote message 0x%X to addr 0x%X\n", - mbox->buffer[mbox->read_index], - (u32) (mbox->virtbase_peer + MBOX_FIFO_DATA)); - - nbr_free--; - mbox->read_index = - (mbox->read_index + 1) % MBOX_BUF_SIZE; - } - - /* - * Check if we still want IRQ:s when there is free - * space to send - */ - if (mbox->read_index != mbox->write_index) { - dev_dbg(&(mbox->pdev->dev), - "Still have messages to send, but FIFO full. " - "Request IRQ again!\n"); - writel(MBOX_ENABLE_IRQ, - mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); - } else { - dev_dbg(&(mbox->pdev->dev), - "No more messages to send. " - "Do not request IRQ again!\n"); - writel(MBOX_DISABLE_IRQ, - mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); - } - - /* - * Check if we can signal any blocked clients that it is OK to - * start buffering again - */ - if (mbox->client_blocked && - (((mbox->write_index + 1) % MBOX_BUF_SIZE) - != mbox->read_index)) { - dev_dbg(&(mbox->pdev->dev), - "Waking up blocked client\n"); - complete(&mbox->buffer_available); - mbox->client_blocked = 0; - } - } - - /* Check if we have any incoming messages */ - nbr_occup = readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7; - if (nbr_occup == 0) - goto exit; - - if (mbox->cb == NULL) { - dev_dbg(&(mbox->pdev->dev), "No receive callback registered, " - "leaving %d incoming messages in fifo!\n", nbr_occup); - goto exit; - } - - /* Read and acknowledge the message */ - mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA); - writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE)); - - /* Notify consumer of new mailbox message */ - dev_dbg(&(mbox->pdev->dev), "Calling callback for message 0x%X!\n", - mbox_value); - mbox->cb(mbox_value, mbox->client_data); - -exit: - dev_dbg(&(mbox->pdev->dev), "Exit mbox IRQ. ri = %d, wi = %d\n", - mbox->read_index, mbox->write_index); - spin_unlock(&mbox->lock); - - return IRQ_HANDLED; -} - -/* Setup is executed once for each mbox pair */ -struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv) -{ - struct resource *resource; - int irq; - int res; - struct mbox *mbox; - - mbox = get_mbox_with_id(mbox_id); - if (mbox == NULL) { - dev_err(&(mbox->pdev->dev), "Incorrect mailbox id: %d!\n", - mbox_id); - goto exit; - } - - /* - * Check if mailbox has been allocated to someone else, - * otherwise allocate it - */ - if (mbox->allocated) { - dev_err(&(mbox->pdev->dev), "Mailbox number %d is busy!\n", - mbox_id); - mbox = NULL; - goto exit; - } - mbox->allocated = true; - - dev_dbg(&(mbox->pdev->dev), "Initiating mailbox number %d: 0x%X...\n", - mbox_id, (u32)mbox); - - mbox->client_data = priv; - mbox->cb = mbox_cb; - - /* Get addr for peer mailbox and ioremap it */ - resource = platform_get_resource_byname(mbox->pdev, - IORESOURCE_MEM, - "mbox_peer"); - if (resource == NULL) { - dev_err(&(mbox->pdev->dev), - "Unable to retrieve mbox peer resource\n"); - mbox = NULL; - goto exit; - } - dev_dbg(&(mbox->pdev->dev), - "Resource name: %s start: 0x%X, end: 0x%X\n", - resource->name, resource->start, resource->end); - mbox->virtbase_peer = ioremap(resource->start, resource_size(resource)); - if (!mbox->virtbase_peer) { - dev_err(&(mbox->pdev->dev), "Unable to ioremap peer mbox\n"); - mbox = NULL; - goto exit; - } - dev_dbg(&(mbox->pdev->dev), - "ioremapped peer physical: (0x%X-0x%X) to virtual: 0x%X\n", - resource->start, resource->end, (u32) mbox->virtbase_peer); - - /* Get addr for local mailbox and ioremap it */ - resource = platform_get_resource_byname(mbox->pdev, - IORESOURCE_MEM, - "mbox_local"); - if (resource == NULL) { - dev_err(&(mbox->pdev->dev), - "Unable to retrieve mbox local resource\n"); - mbox = NULL; - goto exit; - } - dev_dbg(&(mbox->pdev->dev), - "Resource name: %s start: 0x%X, end: 0x%X\n", - resource->name, resource->start, resource->end); - mbox->virtbase_local = ioremap(resource->start, resource_size(resource)); - if (!mbox->virtbase_local) { - dev_err(&(mbox->pdev->dev), "Unable to ioremap local mbox\n"); - mbox = NULL; - goto exit; - } - dev_dbg(&(mbox->pdev->dev), - "ioremapped local physical: (0x%X-0x%X) to virtual: 0x%X\n", - resource->start, resource->end, (u32) mbox->virtbase_peer); - - init_completion(&mbox->buffer_available); - mbox->client_blocked = 0; - - /* Get IRQ for mailbox and allocate it */ - irq = platform_get_irq_byname(mbox->pdev, "mbox_irq"); - if (irq < 0) { - dev_err(&(mbox->pdev->dev), - "Unable to retrieve mbox irq resource\n"); - mbox = NULL; - goto exit; - } - - dev_dbg(&(mbox->pdev->dev), "Allocating irq %d...\n", irq); - res = request_irq(irq, mbox_irq, 0, mbox->name, (void *) mbox); - if (res < 0) { - dev_err(&(mbox->pdev->dev), - "Unable to allocate mbox irq %d\n", irq); - mbox = NULL; - goto exit; - } - - /* Set up mailbox to not launch IRQ on free space in mailbox */ - writel(MBOX_DISABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); - - /* - * Set up mailbox to launch IRQ on new message if we have - * a callback set. If not, do not raise IRQ, but keep message - * in FIFO for manual retrieval - */ - if (mbox_cb != NULL) - writel(MBOX_ENABLE_IRQ, - mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP); - else - writel(MBOX_DISABLE_IRQ, - mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP); - -#if defined(CONFIG_DEBUG_FS) - res = device_create_file(&(mbox->pdev->dev), &dev_attr_fifo); - if (res != 0) - dev_warn(&(mbox->pdev->dev), - "Unable to create mbox sysfs entry"); - - (void) debugfs_create_file("mbox", S_IFREG | S_IRUGO, NULL, - NULL, &mbox_operations); -#endif - - dev_info(&(mbox->pdev->dev), - "Mailbox driver with index %d initiated!\n", mbox_id); - -exit: - return mbox; -} -EXPORT_SYMBOL(mbox_setup); - - -int __init mbox_probe(struct platform_device *pdev) -{ - struct mbox local_mbox; - struct mbox *mbox; - int res = 0; - dev_dbg(&(pdev->dev), "Probing mailbox (pdev = 0x%X)...\n", (u32) pdev); - - memset(&local_mbox, 0x0, sizeof(struct mbox)); - - /* Associate our mbox data with the platform device */ - res = platform_device_add_data(pdev, - (void *) &local_mbox, - sizeof(struct mbox)); - if (res != 0) { - dev_err(&(pdev->dev), - "Unable to allocate driver platform data!\n"); - goto exit; - } - - mbox = (struct mbox *) pdev->dev.platform_data; - mbox->pdev = pdev; - mbox->write_index = 0; - mbox->read_index = 0; - - INIT_LIST_HEAD(&(mbox->list)); - list_add_tail(&(mbox->list), &mboxs); - - sprintf(mbox->name, "%s", MBOX_NAME); - spin_lock_init(&mbox->lock); - - dev_info(&(pdev->dev), "Mailbox driver loaded\n"); - -exit: - return res; -} - -static struct platform_driver mbox_driver = { - .driver = { - .name = MBOX_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init mbox_init(void) -{ - return platform_driver_probe(&mbox_driver, mbox_probe); -} - -module_init(mbox_init); - -void __exit mbox_exit(void) -{ - platform_driver_unregister(&mbox_driver); -} - -module_exit(mbox_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("MBOX driver"); diff --git a/arch/arm/mach-ux500/modem-irq-db5500.c b/arch/arm/mach-ux500/modem-irq-db5500.c deleted file mode 100644 index 6b86416c94c9..000000000000 --- a/arch/arm/mach-ux500/modem-irq-db5500.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson. - * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson. - * License terms: GNU General Public License (GPL), version 2. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/slab.h> - -#include <mach/id.h> - -#define MODEM_INTCON_BASE_ADDR 0xBFFD3000 -#define MODEM_INTCON_SIZE 0xFFF - -#define DEST_IRQ41_OFFSET 0x2A4 -#define DEST_IRQ43_OFFSET 0x2AC -#define DEST_IRQ45_OFFSET 0x2B4 - -#define PRIO_IRQ41_OFFSET 0x6A4 -#define PRIO_IRQ43_OFFSET 0x6AC -#define PRIO_IRQ45_OFFSET 0x6B4 - -#define ALLOW_IRQ_OFFSET 0x104 - -#define MODEM_INTCON_CPU_NBR 0x1 -#define MODEM_INTCON_PRIO_HIGH 0x0 - -#define MODEM_INTCON_ALLOW_IRQ41 0x0200 -#define MODEM_INTCON_ALLOW_IRQ43 0x0800 -#define MODEM_INTCON_ALLOW_IRQ45 0x2000 - -#define MODEM_IRQ_REG_OFFSET 0x4 - -struct modem_irq { - void __iomem *modem_intcon_base; -}; - - -static void setup_modem_intcon(void __iomem *modem_intcon_base) -{ - /* IC_DESTINATION_BASE_ARRAY - Which CPU to receive the IRQ */ - writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ41_OFFSET); - writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ43_OFFSET); - writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ45_OFFSET); - - /* IC_PRIORITY_BASE_ARRAY - IRQ priority in modem IRQ controller */ - writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ41_OFFSET); - writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ43_OFFSET); - writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ45_OFFSET); - - /* IC_ALLOW_ARRAY - IRQ enable */ - writel(MODEM_INTCON_ALLOW_IRQ41 | - MODEM_INTCON_ALLOW_IRQ43 | - MODEM_INTCON_ALLOW_IRQ45, - modem_intcon_base + ALLOW_IRQ_OFFSET); -} - -static irqreturn_t modem_cpu_irq_handler(int irq, void *data) -{ - int real_irq; - int virt_irq; - struct modem_irq *mi = (struct modem_irq *)data; - - /* Read modem side IRQ number from modem IRQ controller */ - real_irq = readl(mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET) & 0xFF; - virt_irq = IRQ_MODEM_EVENTS_BASE + real_irq; - - pr_debug("modem_irq: Worker read addr 0x%X and got value 0x%X " - "which will be 0x%X (%d) which translates to " - "virtual IRQ 0x%X (%d)!\n", - (u32)mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET, - real_irq, - real_irq & 0xFF, - real_irq & 0xFF, - virt_irq, - virt_irq); - - if (virt_irq != 0) - generic_handle_irq(virt_irq); - - pr_debug("modem_irq: Done handling virtual IRQ %d!\n", virt_irq); - - return IRQ_HANDLED; -} - -static void create_virtual_irq(int irq, struct irq_chip *modem_irq_chip) -{ - irq_set_chip_and_handler(irq, modem_irq_chip, handle_simple_irq); - set_irq_flags(irq, IRQF_VALID); - - pr_debug("modem_irq: Created virtual IRQ %d\n", irq); -} - -static int modem_irq_init(void) -{ - int err; - static struct irq_chip modem_irq_chip; - struct modem_irq *mi; - - if (!cpu_is_u5500()) - return -ENODEV; - - pr_info("modem_irq: Set up IRQ handler for incoming modem IRQ %d\n", - IRQ_DB5500_MODEM); - - mi = kmalloc(sizeof(struct modem_irq), GFP_KERNEL); - if (!mi) { - pr_err("modem_irq: Could not allocate device\n"); - return -ENOMEM; - } - - mi->modem_intcon_base = - ioremap(MODEM_INTCON_BASE_ADDR, MODEM_INTCON_SIZE); - pr_debug("modem_irq: ioremapped modem_intcon_base from " - "phy 0x%x to virt 0x%x\n", MODEM_INTCON_BASE_ADDR, - (u32)mi->modem_intcon_base); - - setup_modem_intcon(mi->modem_intcon_base); - - modem_irq_chip = dummy_irq_chip; - modem_irq_chip.name = "modem_irq"; - - /* Create the virtual IRQ:s needed */ - create_virtual_irq(MBOX_PAIR0_VIRT_IRQ, &modem_irq_chip); - create_virtual_irq(MBOX_PAIR1_VIRT_IRQ, &modem_irq_chip); - create_virtual_irq(MBOX_PAIR2_VIRT_IRQ, &modem_irq_chip); - - err = request_threaded_irq(IRQ_DB5500_MODEM, NULL, - modem_cpu_irq_handler, IRQF_ONESHOT, - "modem_irq", mi); - if (err) - pr_err("modem_irq: Could not register IRQ %d\n", - IRQ_DB5500_MODEM); - - return 0; -} - -arch_initcall(modem_irq_init); diff --git a/arch/arm/mach-ux500/pins-db5500.h b/arch/arm/mach-ux500/pins-db5500.h deleted file mode 100644 index bf50c21fe69d..000000000000 --- a/arch/arm/mach-ux500/pins-db5500.h +++ /dev/null @@ -1,620 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License, version 2 - * Author: Rabin Vincent <rabin.vincent@stericsson.com> - */ - -#ifndef __MACH_DB5500_PINS_H -#define __MACH_DB5500_PINS_H - -#define GPIO0_GPIO PIN_CFG(0, GPIO) -#define GPIO0_SM_CS3n PIN_CFG(0, ALT_A) - -#define GPIO1_GPIO PIN_CFG(1, GPIO) -#define GPIO1_SM_A3 PIN_CFG(1, ALT_A) - -#define GPIO2_GPIO PIN_CFG(2, GPIO) -#define GPIO2_SM_A4 PIN_CFG(2, ALT_A) -#define GPIO2_SM_AVD PIN_CFG(2, ALT_B) - -#define GPIO3_GPIO PIN_CFG(3, GPIO) -#define GPIO3_I2C1_SCL PIN_CFG(3, ALT_A) - -#define GPIO4_GPIO PIN_CFG(4, GPIO) -#define GPIO4_I2C1_SDA PIN_CFG(4, ALT_A) - -#define GPIO5_GPIO PIN_CFG(5, GPIO) -#define GPIO5_MC0_DAT0 PIN_CFG(5, ALT_A) -#define GPIO5_SM_ADQ8 PIN_CFG(5, ALT_B) - -#define GPIO6_GPIO PIN_CFG(6, GPIO) -#define GPIO6_MC0_DAT1 PIN_CFG(6, ALT_A) -#define GPIO6_SM_ADQ0 PIN_CFG(6, ALT_B) - -#define GPIO7_GPIO PIN_CFG(7, GPIO) -#define GPIO7_MC0_DAT2 PIN_CFG(7, ALT_A) -#define GPIO7_SM_ADQ9 PIN_CFG(7, ALT_B) - -#define GPIO8_GPIO PIN_CFG(8, GPIO) -#define GPIO8_MC0_DAT3 PIN_CFG(8, ALT_A) -#define GPIO8_SM_ADQ1 PIN_CFG(8, ALT_B) - -#define GPIO9_GPIO PIN_CFG(9, GPIO) -#define GPIO9_MC0_DAT4 PIN_CFG(9, ALT_A) -#define GPIO9_SM_ADQ10 PIN_CFG(9, ALT_B) - -#define GPIO10_GPIO PIN_CFG(10, GPIO) -#define GPIO10_MC0_DAT5 PIN_CFG(10, ALT_A) -#define GPIO10_SM_ADQ2 PIN_CFG(10, ALT_B) - -#define GPIO11_GPIO PIN_CFG(11, GPIO) -#define GPIO11_MC0_DAT6 PIN_CFG(11, ALT_A) -#define GPIO11_SM_ADQ11 PIN_CFG(11, ALT_B) - -#define GPIO12_GPIO PIN_CFG(12, GPIO) -#define GPIO12_MC0_DAT7 PIN_CFG(12, ALT_A) -#define GPIO12_SM_ADQ3 PIN_CFG(12, ALT_B) - -#define GPIO13_GPIO PIN_CFG(13, GPIO) -#define GPIO13_MC0_CMD PIN_CFG(13, ALT_A) -#define GPIO13_SM_BUSY0n PIN_CFG(13, ALT_B) -#define GPIO13_SM_WAIT0n PIN_CFG(13, ALT_C) - -#define GPIO14_GPIO PIN_CFG(14, GPIO) -#define GPIO14_MC0_CLK PIN_CFG(14, ALT_A) -#define GPIO14_SM_CS1n PIN_CFG(14, ALT_B) -#define GPIO14_SM_CKO PIN_CFG(14, ALT_C) - -#define GPIO15_GPIO PIN_CFG(15, GPIO) -#define GPIO15_SM_A5 PIN_CFG(15, ALT_A) -#define GPIO15_SM_CLE PIN_CFG(15, ALT_B) - -#define GPIO16_GPIO PIN_CFG(16, GPIO) -#define GPIO16_MC2_CMD PIN_CFG(16, ALT_A) -#define GPIO16_SM_OEn PIN_CFG(16, ALT_B) - -#define GPIO17_GPIO PIN_CFG(17, GPIO) -#define GPIO17_MC2_CLK PIN_CFG(17, ALT_A) -#define GPIO17_SM_WEn PIN_CFG(17, ALT_B) - -#define GPIO18_GPIO PIN_CFG(18, GPIO) -#define GPIO18_SM_A6 PIN_CFG(18, ALT_A) -#define GPIO18_SM_ALE PIN_CFG(18, ALT_B) -#define GPIO18_SM_AVDn PIN_CFG(18, ALT_C) - -#define GPIO19_GPIO PIN_CFG(19, GPIO) -#define GPIO19_MC2_DAT1 PIN_CFG(19, ALT_A) -#define GPIO19_SM_ADQ4 PIN_CFG(19, ALT_B) - -#define GPIO20_GPIO PIN_CFG(20, GPIO) -#define GPIO20_MC2_DAT3 PIN_CFG(20, ALT_A) -#define GPIO20_SM_ADQ5 PIN_CFG(20, ALT_B) - -#define GPIO21_GPIO PIN_CFG(21, GPIO) -#define GPIO21_MC2_DAT5 PIN_CFG(21, ALT_A) -#define GPIO21_SM_ADQ6 PIN_CFG(21, ALT_B) - -#define GPIO22_GPIO PIN_CFG(22, GPIO) -#define GPIO22_MC2_DAT7 PIN_CFG(22, ALT_A) -#define GPIO22_SM_ADQ7 PIN_CFG(22, ALT_B) - -#define GPIO23_GPIO PIN_CFG(23, GPIO) -#define GPIO23_MC2_DAT0 PIN_CFG(23, ALT_A) -#define GPIO23_SM_ADQ12 PIN_CFG(23, ALT_B) -#define GPIO23_MC0_DAT1 PIN_CFG(23, ALT_C) - -#define GPIO24_GPIO PIN_CFG(24, GPIO) -#define GPIO24_MC2_DAT2 PIN_CFG(24, ALT_A) -#define GPIO24_SM_ADQ13 PIN_CFG(24, ALT_B) -#define GPIO24_MC0_DAT3 PIN_CFG(24, ALT_C) - -#define GPIO25_GPIO PIN_CFG(25, GPIO) -#define GPIO25_MC2_DAT4 PIN_CFG(25, ALT_A) -#define GPIO25_SM_ADQ14 PIN_CFG(25, ALT_B) -#define GPIO25_MC0_CMD PIN_CFG(25, ALT_C) - -#define GPIO26_GPIO PIN_CFG(26, GPIO) -#define GPIO26_MC2_DAT6 PIN_CFG(26, ALT_A) -#define GPIO26_SM_ADQ15 PIN_CFG(26, ALT_B) - -#define GPIO27_GPIO PIN_CFG(27, GPIO) -#define GPIO27_SM_CS0n PIN_CFG(27, ALT_A) -#define GPIO27_SM_PS0n PIN_CFG(27, ALT_B) - -#define GPIO28_GPIO PIN_CFG(28, GPIO) -#define GPIO28_U0_TXD PIN_CFG(28, ALT_A) -#define GPIO28_SM_A0 PIN_CFG(28, ALT_B) - -#define GPIO29_GPIO PIN_CFG(29, GPIO) -#define GPIO29_U0_RXD PIN_CFG(29, ALT_A) -#define GPIO29_SM_A1 PIN_CFG(29, ALT_B) -#define GPIO29_PWM_0 PIN_CFG(29, ALT_C) - -#define GPIO30_GPIO PIN_CFG(30, GPIO) -#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A) -#define GPIO30_SM_A2 PIN_CFG(30, ALT_B) -#define GPIO30_PWM_1 PIN_CFG(30, ALT_C) - -#define GPIO31_GPIO PIN_CFG(31, GPIO) -#define GPIO31_MC0_DAT7 PIN_CFG(31, ALT_A) -#define GPIO31_SM_CS2n PIN_CFG(31, ALT_B) -#define GPIO31_PWM_2 PIN_CFG(31, ALT_C) - -#define GPIO32_GPIO PIN_CFG(32, GPIO) -#define GPIO32_MSP0_TCK PIN_CFG(32, ALT_A) -#define GPIO32_ACCI2S0_SCK PIN_CFG(32, ALT_B) - -#define GPIO33_GPIO PIN_CFG(33, GPIO) -#define GPIO33_MSP0_TFS PIN_CFG(33, ALT_A) -#define GPIO33_ACCI2S0_WS PIN_CFG(33, ALT_B) - -#define GPIO34_GPIO PIN_CFG(34, GPIO) -#define GPIO34_MSP0_TXD PIN_CFG(34, ALT_A) -#define GPIO34_ACCI2S0_DLD PIN_CFG(34, ALT_B) - -#define GPIO35_GPIO PIN_CFG(35, GPIO) -#define GPIO35_MSP0_RXD PIN_CFG(35, ALT_A) -#define GPIO35_ACCI2S0_ULD PIN_CFG(35, ALT_B) - -#define GPIO64_GPIO PIN_CFG(64, GPIO) -#define GPIO64_USB_DAT0 PIN_CFG(64, ALT_A) -#define GPIO64_U0_TXD PIN_CFG(64, ALT_B) - -#define GPIO65_GPIO PIN_CFG(65, GPIO) -#define GPIO65_USB_DAT1 PIN_CFG(65, ALT_A) -#define GPIO65_U0_RXD PIN_CFG(65, ALT_B) - -#define GPIO66_GPIO PIN_CFG(66, GPIO) -#define GPIO66_USB_DAT2 PIN_CFG(66, ALT_A) - -#define GPIO67_GPIO PIN_CFG(67, GPIO) -#define GPIO67_USB_DAT3 PIN_CFG(67, ALT_A) - -#define GPIO68_GPIO PIN_CFG(68, GPIO) -#define GPIO68_USB_DAT4 PIN_CFG(68, ALT_A) - -#define GPIO69_GPIO PIN_CFG(69, GPIO) -#define GPIO69_USB_DAT5 PIN_CFG(69, ALT_A) - -#define GPIO70_GPIO PIN_CFG(70, GPIO) -#define GPIO70_USB_DAT6 PIN_CFG(70, ALT_A) - -#define GPIO71_GPIO PIN_CFG(71, GPIO) -#define GPIO71_USB_DAT7 PIN_CFG(71, ALT_A) - -#define GPIO72_GPIO PIN_CFG(72, GPIO) -#define GPIO72_USB_STP PIN_CFG(72, ALT_A) - -#define GPIO73_GPIO PIN_CFG(73, GPIO) -#define GPIO73_USB_DIR PIN_CFG(73, ALT_A) - -#define GPIO74_GPIO PIN_CFG(74, GPIO) -#define GPIO74_USB_NXT PIN_CFG(74, ALT_A) - -#define GPIO75_GPIO PIN_CFG(75, GPIO) -#define GPIO75_USB_XCLK PIN_CFG(75, ALT_A) - -#define GPIO76_GPIO PIN_CFG(76, GPIO) - -#define GPIO77_GPIO PIN_CFG(77, GPIO) -#define GPIO77_ACCTX_ON PIN_CFG(77, ALT_A) - -#define GPIO78_GPIO PIN_CFG(78, GPIO) -#define GPIO78_IRQn PIN_CFG(78, ALT_A) - -#define GPIO79_GPIO PIN_CFG(79, GPIO) -#define GPIO79_ACCSIM_Clk PIN_CFG(79, ALT_A) - -#define GPIO80_GPIO PIN_CFG(80, GPIO) -#define GPIO80_ACCSIM_Da PIN_CFG(80, ALT_A) - -#define GPIO81_GPIO PIN_CFG(81, GPIO) -#define GPIO81_ACCSIM_Reset PIN_CFG(81, ALT_A) - -#define GPIO82_GPIO PIN_CFG(82, GPIO) -#define GPIO82_ACCSIM_DDir PIN_CFG(82, ALT_A) - -#define GPIO96_GPIO PIN_CFG(96, GPIO) -#define GPIO96_MSP1_TCK PIN_CFG(96, ALT_A) -#define GPIO96_PRCMU_DEBUG3 PIN_CFG(96, ALT_B) -#define GPIO96_PRCMU_DEBUG7 PIN_CFG(96, ALT_C) - -#define GPIO97_GPIO PIN_CFG(97, GPIO) -#define GPIO97_MSP1_TFS PIN_CFG(97, ALT_A) -#define GPIO97_PRCMU_DEBUG2 PIN_CFG(97, ALT_B) -#define GPIO97_PRCMU_DEBUG6 PIN_CFG(97, ALT_C) - -#define GPIO98_GPIO PIN_CFG(98, GPIO) -#define GPIO98_MSP1_TXD PIN_CFG(98, ALT_A) -#define GPIO98_PRCMU_DEBUG1 PIN_CFG(98, ALT_B) -#define GPIO98_PRCMU_DEBUG5 PIN_CFG(98, ALT_C) - -#define GPIO99_GPIO PIN_CFG(99, GPIO) -#define GPIO99_MSP1_RXD PIN_CFG(99, ALT_A) -#define GPIO99_PRCMU_DEBUG0 PIN_CFG(99, ALT_B) -#define GPIO99_PRCMU_DEBUG4 PIN_CFG(99, ALT_C) - -#define GPIO100_GPIO PIN_CFG(100, GPIO) -#define GPIO100_I2C0_SCL PIN_CFG(100, ALT_A) - -#define GPIO101_GPIO PIN_CFG(101, GPIO) -#define GPIO101_I2C0_SDA PIN_CFG(101, ALT_A) - -#define GPIO128_GPIO PIN_CFG(128, GPIO) -#define GPIO128_KP_I0 PIN_CFG(128, ALT_A) -#define GPIO128_BUSMON_D0 PIN_CFG(128, ALT_B) - -#define GPIO129_GPIO PIN_CFG(129, GPIO) -#define GPIO129_KP_O0 PIN_CFG(129, ALT_A) -#define GPIO129_BUSMON_D1 PIN_CFG(129, ALT_B) - -#define GPIO130_GPIO PIN_CFG(130, GPIO) -#define GPIO130_KP_I1 PIN_CFG(130, ALT_A) -#define GPIO130_BUSMON_D2 PIN_CFG(130, ALT_B) - -#define GPIO131_GPIO PIN_CFG(131, GPIO) -#define GPIO131_KP_O1 PIN_CFG(131, ALT_A) -#define GPIO131_BUSMON_D3 PIN_CFG(131, ALT_B) - -#define GPIO132_GPIO PIN_CFG(132, GPIO) -#define GPIO132_KP_I2 PIN_CFG(132, ALT_A) -#define GPIO132_ETM_D15 PIN_CFG(132, ALT_B) -#define GPIO132_STMAPE_CLK PIN_CFG(132, ALT_C) - -#define GPIO133_GPIO PIN_CFG(133, GPIO) -#define GPIO133_KP_O2 PIN_CFG(133, ALT_A) -#define GPIO133_ETM_D14 PIN_CFG(133, ALT_B) -#define GPIO133_U0_RXD PIN_CFG(133, ALT_C) - -#define GPIO134_GPIO PIN_CFG(134, GPIO) -#define GPIO134_KP_I3 PIN_CFG(134, ALT_A) -#define GPIO134_ETM_D13 PIN_CFG(134, ALT_B) -#define GPIO134_STMAPE_DAT0 PIN_CFG(134, ALT_C) - -#define GPIO135_GPIO PIN_CFG(135, GPIO) -#define GPIO135_KP_O3 PIN_CFG(135, ALT_A) -#define GPIO135_ETM_D12 PIN_CFG(135, ALT_B) -#define GPIO135_STMAPE_DAT1 PIN_CFG(135, ALT_C) - -#define GPIO136_GPIO PIN_CFG(136, GPIO) -#define GPIO136_KP_I4 PIN_CFG(136, ALT_A) -#define GPIO136_ETM_D11 PIN_CFG(136, ALT_B) -#define GPIO136_STMAPE_DAT2 PIN_CFG(136, ALT_C) - -#define GPIO137_GPIO PIN_CFG(137, GPIO) -#define GPIO137_KP_O4 PIN_CFG(137, ALT_A) -#define GPIO137_ETM_D10 PIN_CFG(137, ALT_B) -#define GPIO137_STMAPE_DAT3 PIN_CFG(137, ALT_C) - -#define GPIO138_GPIO PIN_CFG(138, GPIO) -#define GPIO138_KP_I5 PIN_CFG(138, ALT_A) -#define GPIO138_ETM_D9 PIN_CFG(138, ALT_B) -#define GPIO138_U0_TXD PIN_CFG(138, ALT_C) - -#define GPIO139_GPIO PIN_CFG(139, GPIO) -#define GPIO139_KP_O5 PIN_CFG(139, ALT_A) -#define GPIO139_ETM_D8 PIN_CFG(139, ALT_B) -#define GPIO139_BUSMON_D11 PIN_CFG(139, ALT_C) - -#define GPIO140_GPIO PIN_CFG(140, GPIO) -#define GPIO140_KP_I6 PIN_CFG(140, ALT_A) -#define GPIO140_ETM_D7 PIN_CFG(140, ALT_B) -#define GPIO140_STMAPE_CLK PIN_CFG(140, ALT_C) - -#define GPIO141_GPIO PIN_CFG(141, GPIO) -#define GPIO141_KP_O6 PIN_CFG(141, ALT_A) -#define GPIO141_ETM_D6 PIN_CFG(141, ALT_B) -#define GPIO141_U0_RXD PIN_CFG(141, ALT_C) - -#define GPIO142_GPIO PIN_CFG(142, GPIO) -#define GPIO142_KP_I7 PIN_CFG(142, ALT_A) -#define GPIO142_ETM_D5 PIN_CFG(142, ALT_B) -#define GPIO142_STMAPE_DAT0 PIN_CFG(142, ALT_C) - -#define GPIO143_GPIO PIN_CFG(143, GPIO) -#define GPIO143_KP_O7 PIN_CFG(143, ALT_A) -#define GPIO143_ETM_D4 PIN_CFG(143, ALT_B) -#define GPIO143_STMAPE_DAT1 PIN_CFG(143, ALT_C) - -#define GPIO144_GPIO PIN_CFG(144, GPIO) -#define GPIO144_I2C3_SCL PIN_CFG(144, ALT_A) -#define GPIO144_ETM_D3 PIN_CFG(144, ALT_B) -#define GPIO144_STMAPE_DAT2 PIN_CFG(144, ALT_C) - -#define GPIO145_GPIO PIN_CFG(145, GPIO) -#define GPIO145_I2C3_SDA PIN_CFG(145, ALT_A) -#define GPIO145_ETM_D2 PIN_CFG(145, ALT_B) -#define GPIO145_STMAPE_DAT3 PIN_CFG(145, ALT_C) - -#define GPIO146_GPIO PIN_CFG(146, GPIO) -#define GPIO146_PWM_0 PIN_CFG(146, ALT_A) -#define GPIO146_ETM_D1 PIN_CFG(146, ALT_B) - -#define GPIO147_GPIO PIN_CFG(147, GPIO) -#define GPIO147_PWM_1 PIN_CFG(147, ALT_A) -#define GPIO147_ETM_D0 PIN_CFG(147, ALT_B) - -#define GPIO148_GPIO PIN_CFG(148, GPIO) -#define GPIO148_PWM_2 PIN_CFG(148, ALT_A) -#define GPIO148_ETM_CLK PIN_CFG(148, ALT_B) - -#define GPIO160_GPIO PIN_CFG(160, GPIO) -#define GPIO160_CLKOUT_REQn PIN_CFG(160, ALT_A) - -#define GPIO161_GPIO PIN_CFG(161, GPIO) -#define GPIO161_CLKOUT_0 PIN_CFG(161, ALT_A) - -#define GPIO162_GPIO PIN_CFG(162, GPIO) -#define GPIO162_CLKOUT_1 PIN_CFG(162, ALT_A) - -#define GPIO163_GPIO PIN_CFG(163, GPIO) - -#define GPIO164_GPIO PIN_CFG(164, GPIO) -#define GPIO164_GPS_START PIN_CFG(164, ALT_A) - -#define GPIO165_GPIO PIN_CFG(165, GPIO) -#define GPIO165_SPI1_CS2n PIN_CFG(165, ALT_A) -#define GPIO165_U3_RXD PIN_CFG(165, ALT_B) -#define GPIO165_BUSMON_D20 PIN_CFG(165, ALT_C) - -#define GPIO166_GPIO PIN_CFG(166, GPIO) -#define GPIO166_SPI1_CS1n PIN_CFG(166, ALT_A) -#define GPIO166_U3_TXD PIN_CFG(166, ALT_B) -#define GPIO166_BUSMON_D21 PIN_CFG(166, ALT_C) - -#define GPIO167_GPIO PIN_CFG(167, GPIO) -#define GPIO167_SPI1_CS0n PIN_CFG(167, ALT_A) -#define GPIO167_U3_RTSn PIN_CFG(167, ALT_B) -#define GPIO167_BUSMON_D22 PIN_CFG(167, ALT_C) - -#define GPIO168_GPIO PIN_CFG(168, GPIO) -#define GPIO168_SPI1_RXD PIN_CFG(168, ALT_A) -#define GPIO168_U3_CTSn PIN_CFG(168, ALT_B) -#define GPIO168_BUSMON_D23 PIN_CFG(168, ALT_C) - -#define GPIO169_GPIO PIN_CFG(169, GPIO) -#define GPIO169_SPI1_TXD PIN_CFG(169, ALT_A) -#define GPIO169_DDR_RC PIN_CFG(169, ALT_B) -#define GPIO169_BUSMON_D24 PIN_CFG(169, ALT_C) - -#define GPIO170_GPIO PIN_CFG(170, GPIO) -#define GPIO170_SPI1_CLK PIN_CFG(170, ALT_A) - -#define GPIO171_GPIO PIN_CFG(171, GPIO) -#define GPIO171_MC3_DAT0 PIN_CFG(171, ALT_A) -#define GPIO171_SPI3_RXD PIN_CFG(171, ALT_B) -#define GPIO171_BUSMON_D25 PIN_CFG(171, ALT_C) - -#define GPIO172_GPIO PIN_CFG(172, GPIO) -#define GPIO172_MC3_DAT1 PIN_CFG(172, ALT_A) -#define GPIO172_SPI3_CS1n PIN_CFG(172, ALT_B) -#define GPIO172_BUSMON_D26 PIN_CFG(172, ALT_C) - -#define GPIO173_GPIO PIN_CFG(173, GPIO) -#define GPIO173_MC3_DAT2 PIN_CFG(173, ALT_A) -#define GPIO173_SPI3_CS2n PIN_CFG(173, ALT_B) -#define GPIO173_BUSMON_D27 PIN_CFG(173, ALT_C) - -#define GPIO174_GPIO PIN_CFG(174, GPIO) -#define GPIO174_MC3_DAT3 PIN_CFG(174, ALT_A) -#define GPIO174_SPI3_CS0n PIN_CFG(174, ALT_B) -#define GPIO174_BUSMON_D28 PIN_CFG(174, ALT_C) - -#define GPIO175_GPIO PIN_CFG(175, GPIO) -#define GPIO175_MC3_CMD PIN_CFG(175, ALT_A) -#define GPIO175_SPI3_TXD PIN_CFG(175, ALT_B) -#define GPIO175_BUSMON_D29 PIN_CFG(175, ALT_C) - -#define GPIO176_GPIO PIN_CFG(176, GPIO) -#define GPIO176_MC3_CLK PIN_CFG(176, ALT_A) -#define GPIO176_SPI3_CLK PIN_CFG(176, ALT_B) - -#define GPIO177_GPIO PIN_CFG(177, GPIO) -#define GPIO177_U2_RXD PIN_CFG(177, ALT_A) -#define GPIO177_I2C3_SCL PIN_CFG(177, ALT_B) -#define GPIO177_BUSMON_D30 PIN_CFG(177, ALT_C) - -#define GPIO178_GPIO PIN_CFG(178, GPIO) -#define GPIO178_U2_TXD PIN_CFG(178, ALT_A) -#define GPIO178_I2C3_SDA PIN_CFG(178, ALT_B) -#define GPIO178_BUSMON_D31 PIN_CFG(178, ALT_C) - -#define GPIO179_GPIO PIN_CFG(179, GPIO) -#define GPIO179_U2_CTSn PIN_CFG(179, ALT_A) -#define GPIO179_U3_RXD PIN_CFG(179, ALT_B) -#define GPIO179_BUSMON_D32 PIN_CFG(179, ALT_C) - -#define GPIO180_GPIO PIN_CFG(180, GPIO) -#define GPIO180_U2_RTSn PIN_CFG(180, ALT_A) -#define GPIO180_U3_TXD PIN_CFG(180, ALT_B) -#define GPIO180_BUSMON_D33 PIN_CFG(180, ALT_C) - -#define GPIO185_GPIO PIN_CFG(185, GPIO) -#define GPIO185_SPI3_CS2n PIN_CFG(185, ALT_A) -#define GPIO185_MC4_DAT0 PIN_CFG(185, ALT_B) - -#define GPIO186_GPIO PIN_CFG(186, GPIO) -#define GPIO186_SPI3_CS1n PIN_CFG(186, ALT_A) -#define GPIO186_MC4_DAT1 PIN_CFG(186, ALT_B) - -#define GPIO187_GPIO PIN_CFG(187, GPIO) -#define GPIO187_SPI3_CS0n PIN_CFG(187, ALT_A) -#define GPIO187_MC4_DAT2 PIN_CFG(187, ALT_B) - -#define GPIO188_GPIO PIN_CFG(188, GPIO) -#define GPIO188_SPI3_RXD PIN_CFG(188, ALT_A) -#define GPIO188_MC4_DAT3 PIN_CFG(188, ALT_B) - -#define GPIO189_GPIO PIN_CFG(189, GPIO) -#define GPIO189_SPI3_TXD PIN_CFG(189, ALT_A) -#define GPIO189_MC4_CMD PIN_CFG(189, ALT_B) - -#define GPIO190_GPIO PIN_CFG(190, GPIO) -#define GPIO190_SPI3_CLK PIN_CFG(190, ALT_A) -#define GPIO190_MC4_CLK PIN_CFG(190, ALT_B) - -#define GPIO191_GPIO PIN_CFG(191, GPIO) -#define GPIO191_MC1_DAT0 PIN_CFG(191, ALT_A) -#define GPIO191_MC4_DAT4 PIN_CFG(191, ALT_B) -#define GPIO191_STMAPE_DAT0 PIN_CFG(191, ALT_C) - -#define GPIO192_GPIO PIN_CFG(192, GPIO) -#define GPIO192_MC1_DAT1 PIN_CFG(192, ALT_A) -#define GPIO192_MC4_DAT5 PIN_CFG(192, ALT_B) -#define GPIO192_STMAPE_DAT1 PIN_CFG(192, ALT_C) - -#define GPIO193_GPIO PIN_CFG(193, GPIO) -#define GPIO193_MC1_DAT2 PIN_CFG(193, ALT_A) -#define GPIO193_MC4_DAT6 PIN_CFG(193, ALT_B) -#define GPIO193_STMAPE_DAT2 PIN_CFG(193, ALT_C) - -#define GPIO194_GPIO PIN_CFG(194, GPIO) -#define GPIO194_MC1_DAT3 PIN_CFG(194, ALT_A) -#define GPIO194_MC4_DAT7 PIN_CFG(194, ALT_B) -#define GPIO194_STMAPE_DAT3 PIN_CFG(194, ALT_C) - -#define GPIO195_GPIO PIN_CFG(195, GPIO) -#define GPIO195_MC1_CLK PIN_CFG(195, ALT_A) -#define GPIO195_STMAPE_CLK PIN_CFG(195, ALT_B) -#define GPIO195_BUSMON_CLK PIN_CFG(195, ALT_C) - -#define GPIO196_GPIO PIN_CFG(196, GPIO) -#define GPIO196_MC1_CMD PIN_CFG(196, ALT_A) -#define GPIO196_U0_RXD PIN_CFG(196, ALT_B) -#define GPIO196_BUSMON_D38 PIN_CFG(196, ALT_C) - -#define GPIO197_GPIO PIN_CFG(197, GPIO) -#define GPIO197_MC1_CMDDIR PIN_CFG(197, ALT_A) -#define GPIO197_BUSMON_D39 PIN_CFG(197, ALT_B) - -#define GPIO198_GPIO PIN_CFG(198, GPIO) -#define GPIO198_MC1_FBCLK PIN_CFG(198, ALT_A) - -#define GPIO199_GPIO PIN_CFG(199, GPIO) -#define GPIO199_MC1_DAT0DIR PIN_CFG(199, ALT_A) -#define GPIO199_BUSMON_D40 PIN_CFG(199, ALT_B) - -#define GPIO200_GPIO PIN_CFG(200, GPIO) -#define GPIO200_U1_TXD PIN_CFG(200, ALT_A) -#define GPIO200_ACCU0_RTSn PIN_CFG(200, ALT_B) - -#define GPIO201_GPIO PIN_CFG(201, GPIO) -#define GPIO201_U1_RXD PIN_CFG(201, ALT_A) -#define GPIO201_ACCU0_CTSn PIN_CFG(201, ALT_B) - -#define GPIO202_GPIO PIN_CFG(202, GPIO) -#define GPIO202_U1_CTSn PIN_CFG(202, ALT_A) -#define GPIO202_ACCU0_RXD PIN_CFG(202, ALT_B) - -#define GPIO203_GPIO PIN_CFG(203, GPIO) -#define GPIO203_U1_RTSn PIN_CFG(203, ALT_A) -#define GPIO203_ACCU0_TXD PIN_CFG(203, ALT_B) - -#define GPIO204_GPIO PIN_CFG(204, GPIO) -#define GPIO204_SPI0_CS2n PIN_CFG(204, ALT_A) -#define GPIO204_ACCGPIO_000 PIN_CFG(204, ALT_B) -#define GPIO204_LCD_VSI1 PIN_CFG(204, ALT_C) - -#define GPIO205_GPIO PIN_CFG(205, GPIO) -#define GPIO205_SPI0_CS1n PIN_CFG(205, ALT_A) -#define GPIO205_ACCGPIO_001 PIN_CFG(205, ALT_B) -#define GPIO205_LCD_D3 PIN_CFG(205, ALT_C) - -#define GPIO206_GPIO PIN_CFG(206, GPIO) -#define GPIO206_SPI0_CS0n PIN_CFG(206, ALT_A) -#define GPIO206_ACCGPIO_002 PIN_CFG(206, ALT_B) -#define GPIO206_LCD_D2 PIN_CFG(206, ALT_C) - -#define GPIO207_GPIO PIN_CFG(207, GPIO) -#define GPIO207_SPI0_RXD PIN_CFG(207, ALT_A) -#define GPIO207_ACCGPIO_003 PIN_CFG(207, ALT_B) -#define GPIO207_LCD_D1 PIN_CFG(207, ALT_C) - -#define GPIO208_GPIO PIN_CFG(208, GPIO) -#define GPIO208_SPI0_TXD PIN_CFG(208, ALT_A) -#define GPIO208_ACCGPIO_004 PIN_CFG(208, ALT_B) -#define GPIO208_LCD_D0 PIN_CFG(208, ALT_C) - -#define GPIO209_GPIO PIN_CFG(209, GPIO) -#define GPIO209_SPI0_CLK PIN_CFG(209, ALT_A) -#define GPIO209_ACCGPIO_005 PIN_CFG(209, ALT_B) -#define GPIO209_LCD_CLK PIN_CFG(209, ALT_C) - -#define GPIO210_GPIO PIN_CFG(210, GPIO) -#define GPIO210_LCD_VSO PIN_CFG(210, ALT_A) -#define GPIO210_PRCMU_PWRCTRL1 PIN_CFG(210, ALT_B) - -#define GPIO211_GPIO PIN_CFG(211, GPIO) -#define GPIO211_LCD_VSI0 PIN_CFG(211, ALT_A) -#define GPIO211_PRCMU_PWRCTRL2 PIN_CFG(211, ALT_B) - -#define GPIO212_GPIO PIN_CFG(212, GPIO) -#define GPIO212_SPI2_CS2n PIN_CFG(212, ALT_A) -#define GPIO212_LCD_HSO PIN_CFG(212, ALT_B) - -#define GPIO213_GPIO PIN_CFG(213, GPIO) -#define GPIO213_SPI2_CS1n PIN_CFG(213, ALT_A) -#define GPIO213_LCD_DE PIN_CFG(213, ALT_B) -#define GPIO213_BUSMON_D16 PIN_CFG(213, ALT_C) - -#define GPIO214_GPIO PIN_CFG(214, GPIO) -#define GPIO214_SPI2_CS0n PIN_CFG(214, ALT_A) -#define GPIO214_LCD_D7 PIN_CFG(214, ALT_B) -#define GPIO214_BUSMON_D17 PIN_CFG(214, ALT_C) - -#define GPIO215_GPIO PIN_CFG(215, GPIO) -#define GPIO215_SPI2_RXD PIN_CFG(215, ALT_A) -#define GPIO215_LCD_D6 PIN_CFG(215, ALT_B) -#define GPIO215_BUSMON_D18 PIN_CFG(215, ALT_C) - -#define GPIO216_GPIO PIN_CFG(216, GPIO) -#define GPIO216_SPI2_CLK PIN_CFG(216, ALT_A) -#define GPIO216_LCD_D5 PIN_CFG(216, ALT_B) - -#define GPIO217_GPIO PIN_CFG(217, GPIO) -#define GPIO217_SPI2_TXD PIN_CFG(217, ALT_A) -#define GPIO217_LCD_D4 PIN_CFG(217, ALT_B) -#define GPIO217_BUSMON_D19 PIN_CFG(217, ALT_C) - -#define GPIO218_GPIO PIN_CFG(218, GPIO) -#define GPIO218_I2C2_SCL PIN_CFG(218, ALT_A) -#define GPIO218_LCD_VSO PIN_CFG(218, ALT_B) - -#define GPIO219_GPIO PIN_CFG(219, GPIO) -#define GPIO219_I2C2_SDA PIN_CFG(219, ALT_A) -#define GPIO219_LCD_D3 PIN_CFG(219, ALT_B) - -#define GPIO220_GPIO PIN_CFG(220, GPIO) -#define GPIO220_MSP2_TCK PIN_CFG(220, ALT_A) -#define GPIO220_LCD_D2 PIN_CFG(220, ALT_B) - -#define GPIO221_GPIO PIN_CFG(221, GPIO) -#define GPIO221_MSP2_TFS PIN_CFG(221, ALT_A) -#define GPIO221_LCD_D1 PIN_CFG(221, ALT_B) - -#define GPIO222_GPIO PIN_CFG(222, GPIO) -#define GPIO222_MSP2_TXD PIN_CFG(222, ALT_A) -#define GPIO222_LCD_D0 PIN_CFG(222, ALT_B) - -#define GPIO223_GPIO PIN_CFG(223, GPIO) -#define GPIO223_MSP2_RXD PIN_CFG(223, ALT_A) -#define GPIO223_LCD_CLK PIN_CFG(223, ALT_B) - -#define GPIO224_GPIO PIN_CFG(224, GPIO) -#define GPIO224_PRCMU_PWRCTRL0 PIN_CFG(224, ALT_A) -#define GPIO224_LCD_VSI1 PIN_CFG(224, ALT_B) - -#define GPIO225_GPIO PIN_CFG(225, GPIO) -#define GPIO225_PRCMU_PWRCTRL1 PIN_CFG(225, ALT_A) -#define GPIO225_IRDA_RXD PIN_CFG(225, ALT_B) - -#define GPIO226_GPIO PIN_CFG(226, GPIO) -#define GPIO226_PRCMU_PWRCTRL2 PIN_CFG(226, ALT_A) -#define GPIO226_IRRC_DAT PIN_CFG(226, ALT_B) - -#define GPIO227_GPIO PIN_CFG(227, GPIO) -#define GPIO227_IRRC_DAT PIN_CFG(227, ALT_A) -#define GPIO227_IRDA_TXD PIN_CFG(227, ALT_B) - -#endif diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index eff5842f6232..e8cd51aa61e4 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -48,9 +48,7 @@ static void write_pen_release(int val) static void __iomem *scu_base_addr(void) { - if (cpu_is_u5500()) - return __io_address(U5500_SCU_BASE); - else if (cpu_is_u8500()) + if (cpu_is_u8500()) return __io_address(U8500_SCU_BASE); else ux500_unknown_soc(); @@ -120,9 +118,7 @@ static void __init wakeup_secondary(void) { void __iomem *backupram; - if (cpu_is_u5500()) - backupram = __io_address(U5500_BACKUPRAM0_BASE); - else if (cpu_is_u8500()) + if (cpu_is_u8500()) backupram = __io_address(U8500_BACKUPRAM0_BASE); else ux500_unknown_soc(); diff --git a/arch/arm/mach-ux500/ste-dma40-db5500.h b/arch/arm/mach-ux500/ste-dma40-db5500.h deleted file mode 100644 index cb2110c32858..000000000000 --- a/arch/arm/mach-ux500/ste-dma40-db5500.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - * - * DB5500-SoC-specific configuration for DMA40 - */ - -#ifndef STE_DMA40_DB5500_H -#define STE_DMA40_DB5500_H - -#define DB5500_DMA_NR_DEV 64 - -enum dma_src_dev_type { - DB5500_DMA_DEV0_SPI0_RX = 0, - DB5500_DMA_DEV1_SPI1_RX = 1, - DB5500_DMA_DEV2_SPI2_RX = 2, - DB5500_DMA_DEV3_SPI3_RX = 3, - DB5500_DMA_DEV4_USB_OTG_IEP_1_9 = 4, - DB5500_DMA_DEV5_USB_OTG_IEP_2_10 = 5, - DB5500_DMA_DEV6_USB_OTG_IEP_3_11 = 6, - DB5500_DMA_DEV7_IRDA_RFS = 7, - DB5500_DMA_DEV8_IRDA_FIFO_RX = 8, - DB5500_DMA_DEV9_MSP0_RX = 9, - DB5500_DMA_DEV10_MSP1_RX = 10, - DB5500_DMA_DEV11_MSP2_RX = 11, - DB5500_DMA_DEV12_UART0_RX = 12, - DB5500_DMA_DEV13_UART1_RX = 13, - DB5500_DMA_DEV14_UART2_RX = 14, - DB5500_DMA_DEV15_UART3_RX = 15, - DB5500_DMA_DEV16_USB_OTG_IEP_8 = 16, - DB5500_DMA_DEV17_USB_OTG_IEP_1_9 = 17, - DB5500_DMA_DEV18_USB_OTG_IEP_2_10 = 18, - DB5500_DMA_DEV19_USB_OTG_IEP_3_11 = 19, - DB5500_DMA_DEV20_USB_OTG_IEP_4_12 = 20, - DB5500_DMA_DEV21_USB_OTG_IEP_5_13 = 21, - DB5500_DMA_DEV22_USB_OTG_IEP_6_14 = 22, - DB5500_DMA_DEV23_USB_OTG_IEP_7_15 = 23, - DB5500_DMA_DEV24_SDMMC0_RX = 24, - DB5500_DMA_DEV25_SDMMC1_RX = 25, - DB5500_DMA_DEV26_SDMMC2_RX = 26, - DB5500_DMA_DEV27_SDMMC3_RX = 27, - DB5500_DMA_DEV28_SDMMC4_RX = 28, - /* 29 - 32 not used */ - DB5500_DMA_DEV33_SDMMC0_RX = 33, - DB5500_DMA_DEV34_SDMMC1_RX = 34, - DB5500_DMA_DEV35_SDMMC2_RX = 35, - DB5500_DMA_DEV36_SDMMC3_RX = 36, - DB5500_DMA_DEV37_SDMMC4_RX = 37, - DB5500_DMA_DEV38_USB_OTG_IEP_8 = 38, - DB5500_DMA_DEV39_USB_OTG_IEP_1_9 = 39, - DB5500_DMA_DEV40_USB_OTG_IEP_2_10 = 40, - DB5500_DMA_DEV41_USB_OTG_IEP_3_11 = 41, - DB5500_DMA_DEV42_USB_OTG_IEP_4_12 = 42, - DB5500_DMA_DEV43_USB_OTG_IEP_5_13 = 43, - DB5500_DMA_DEV44_USB_OTG_IEP_6_14 = 44, - DB5500_DMA_DEV45_USB_OTG_IEP_7_15 = 45, - /* 46 not used */ - DB5500_DMA_DEV47_MCDE_RX = 47, - DB5500_DMA_DEV48_CRYPTO1_RX = 48, - /* 49, 50 not used */ - DB5500_DMA_DEV49_I2C1_RX = 51, - DB5500_DMA_DEV50_I2C3_RX = 52, - DB5500_DMA_DEV51_I2C2_RX = 53, - /* 54 - 60 not used */ - DB5500_DMA_DEV61_CRYPTO0_RX = 61, - /* 62, 63 not used */ -}; - -enum dma_dest_dev_type { - DB5500_DMA_DEV0_SPI0_TX = 0, - DB5500_DMA_DEV1_SPI1_TX = 1, - DB5500_DMA_DEV2_SPI2_TX = 2, - DB5500_DMA_DEV3_SPI3_TX = 3, - DB5500_DMA_DEV4_USB_OTG_OEP_1_9 = 4, - DB5500_DMA_DEV5_USB_OTG_OEP_2_10 = 5, - DB5500_DMA_DEV6_USB_OTG_OEP_3_11 = 6, - DB5500_DMA_DEV7_IRRC_TX = 7, - DB5500_DMA_DEV8_IRDA_FIFO_TX = 8, - DB5500_DMA_DEV9_MSP0_TX = 9, - DB5500_DMA_DEV10_MSP1_TX = 10, - DB5500_DMA_DEV11_MSP2_TX = 11, - DB5500_DMA_DEV12_UART0_TX = 12, - DB5500_DMA_DEV13_UART1_TX = 13, - DB5500_DMA_DEV14_UART2_TX = 14, - DB5500_DMA_DEV15_UART3_TX = 15, - DB5500_DMA_DEV16_USB_OTG_OEP_8 = 16, - DB5500_DMA_DEV17_USB_OTG_OEP_1_9 = 17, - DB5500_DMA_DEV18_USB_OTG_OEP_2_10 = 18, - DB5500_DMA_DEV19_USB_OTG_OEP_3_11 = 19, - DB5500_DMA_DEV20_USB_OTG_OEP_4_12 = 20, - DB5500_DMA_DEV21_USB_OTG_OEP_5_13 = 21, - DB5500_DMA_DEV22_USB_OTG_OEP_6_14 = 22, - DB5500_DMA_DEV23_USB_OTG_OEP_7_15 = 23, - DB5500_DMA_DEV24_SDMMC0_TX = 24, - DB5500_DMA_DEV25_SDMMC1_TX = 25, - DB5500_DMA_DEV26_SDMMC2_TX = 26, - DB5500_DMA_DEV27_SDMMC3_TX = 27, - DB5500_DMA_DEV28_SDMMC4_TX = 28, - /* 29 - 31 not used */ - DB5500_DMA_DEV32_FSMC_TX = 32, - DB5500_DMA_DEV33_SDMMC0_TX = 33, - DB5500_DMA_DEV34_SDMMC1_TX = 34, - DB5500_DMA_DEV35_SDMMC2_TX = 35, - DB5500_DMA_DEV36_SDMMC3_TX = 36, - DB5500_DMA_DEV37_SDMMC4_TX = 37, - DB5500_DMA_DEV38_USB_OTG_OEP_8 = 38, - DB5500_DMA_DEV39_USB_OTG_OEP_1_9 = 39, - DB5500_DMA_DEV40_USB_OTG_OEP_2_10 = 40, - DB5500_DMA_DEV41_USB_OTG_OEP_3_11 = 41, - DB5500_DMA_DEV42_USB_OTG_OEP_4_12 = 42, - DB5500_DMA_DEV43_USB_OTG_OEP_5_13 = 43, - DB5500_DMA_DEV44_USB_OTG_OEP_6_14 = 44, - DB5500_DMA_DEV45_USB_OTG_OEP_7_15 = 45, - /* 46 not used */ - DB5500_DMA_DEV47_STM_TX = 47, - DB5500_DMA_DEV48_CRYPTO1_TX = 48, - DB5500_DMA_DEV49_CRYPTO1_TX_HASH1_TX = 49, - DB5500_DMA_DEV50_HASH1_TX = 50, - DB5500_DMA_DEV51_I2C1_TX = 51, - DB5500_DMA_DEV52_I2C3_TX = 52, - DB5500_DMA_DEV53_I2C2_TX = 53, - /* 54, 55 not used */ - DB5500_DMA_MEMCPY_TX_1 = 56, - DB5500_DMA_MEMCPY_TX_2 = 57, - DB5500_DMA_MEMCPY_TX_3 = 58, - DB5500_DMA_MEMCPY_TX_4 = 59, - DB5500_DMA_MEMCPY_TX_5 = 60, - DB5500_DMA_DEV61_CRYPTO0_TX = 61, - DB5500_DMA_DEV62_CRYPTO0_TX_HASH0_TX = 62, - DB5500_DMA_DEV63_HASH0_TX = 63, -}; - -#endif diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index d37df98b5c32..52e55337aa9b 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -18,8 +18,6 @@ #include <mach/irqs.h> #ifdef CONFIG_HAVE_ARM_TWD -static DEFINE_TWD_LOCAL_TIMER(u5500_twd_local_timer, - U5500_TWD_BASE, IRQ_LOCALTIMER); static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer, U8500_TWD_BASE, IRQ_LOCALTIMER); @@ -28,8 +26,8 @@ static void __init ux500_twd_init(void) struct twd_local_timer *twd_local_timer; int err; - twd_local_timer = cpu_is_u5500() ? &u5500_twd_local_timer : - &u8500_twd_local_timer; + /* Use this to switch local timer base if changed in new ASICs */ + twd_local_timer = &u8500_twd_local_timer; if (of_have_populated_dt()) twd_local_timer_of_register(); @@ -48,10 +46,7 @@ static void __init ux500_timer_init(void) void __iomem *mtu_timer_base; void __iomem *prcmu_timer_base; - if (cpu_is_u5500()) { - mtu_timer_base = __io_address(U5500_MTU0_BASE); - prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE); - } else if (cpu_is_u8500()) { + if (cpu_is_u8500()) { mtu_timer_base = __io_address(U8500_MTU0_BASE); prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE); } else { @@ -70,7 +65,7 @@ static void __init ux500_timer_init(void) * depending on delay which is not yet calibrated. RTC-RTT is in the * always-on powerdomain and is used as clockevent instead of twd when * sleeping. - * The PRCMU timer 4(3 for DB5500) register a clocksource and + * The PRCMU timer 4 register a clocksource and * sched_clock with higher rating then MTU since is always-on. * */ diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index ff1f7cc11f87..80741992a9fc 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -26,18 +26,23 @@ ENTRY(v6_early_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR /* - * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR (erratum 326103). - * The test below covers all the write situations, including Java bytecodes + * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR. */ - bic r1, r1, #1 << 11 @ clear bit 11 of FSR +#ifdef CONFIG_ARM_ERRATA_326103 + ldr ip, =0x4107b36 + mrc p15, 0, r3, c0, c0, 0 @ get processor id + teq ip, r3, lsr #4 @ r0 ARM1136? + bne do_DataAbort tst r5, #PSR_J_BIT @ Java? + tsteq r5, #PSR_T_BIT @ Thumb? bne do_DataAbort - do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 - ldreq r3, [r4] @ read aborted ARM instruction + bic r1, r1, #1 << 11 @ clear bit 11 of FSR + ldr r3, [r4] @ read aborted ARM instruction #ifdef CONFIG_CPU_ENDIAN_BE8 - reveq r3, r3 + rev r3, r3 #endif do_ldrd_abort tmp=ip, insn=r3 tst r3, #1 << 20 @ L = 0 -> write orreq r1, r1, #1 << 11 @ yes. +#endif b do_DataAbort diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index a53fd2aaa2f4..2a8e380501e8 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -32,6 +32,7 @@ static void __iomem *l2x0_base; static DEFINE_RAW_SPINLOCK(l2x0_lock); static u32 l2x0_way_mask; /* Bitmask of active ways */ static u32 l2x0_size; +static unsigned long sync_reg_offset = L2X0_CACHE_SYNC; struct l2x0_regs l2x0_saved_regs; @@ -61,12 +62,7 @@ static inline void cache_sync(void) { void __iomem *base = l2x0_base; -#ifdef CONFIG_PL310_ERRATA_753970 - /* write to an unmmapped register */ - writel_relaxed(0, base + L2X0_DUMMY_REG); -#else - writel_relaxed(0, base + L2X0_CACHE_SYNC); -#endif + writel_relaxed(0, base + sync_reg_offset); cache_wait(base + L2X0_CACHE_SYNC, 1); } @@ -85,10 +81,13 @@ static inline void l2x0_inv_line(unsigned long addr) } #if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915) +static inline void debug_writel(unsigned long val) +{ + if (outer_cache.set_debug) + outer_cache.set_debug(val); +} -#define debug_writel(val) outer_cache.set_debug(val) - -static void l2x0_set_debug(unsigned long val) +static void pl310_set_debug(unsigned long val) { writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL); } @@ -98,7 +97,7 @@ static inline void debug_writel(unsigned long val) { } -#define l2x0_set_debug NULL +#define pl310_set_debug NULL #endif #ifdef CONFIG_PL310_ERRATA_588369 @@ -331,6 +330,11 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) else ways = 8; type = "L310"; +#ifdef CONFIG_PL310_ERRATA_753970 + /* Unmapped register. */ + sync_reg_offset = L2X0_DUMMY_REG; +#endif + outer_cache.set_debug = pl310_set_debug; break; case L2X0_CACHE_ID_PART_L210: ways = (aux >> 13) & 0xf; @@ -379,7 +383,6 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) outer_cache.flush_all = l2x0_flush_all; outer_cache.inv_all = l2x0_inv_all; outer_cache.disable = l2x0_disable; - outer_cache.set_debug = l2x0_set_debug; printk(KERN_INFO "%s cache controller enabled\n", type); printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n", diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 595079fa9d1d..8f5813bbffb5 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -293,11 +293,11 @@ EXPORT_SYMBOL(pfn_valid); #endif #ifndef CONFIG_SPARSEMEM -static void arm_memory_present(void) +static void __init arm_memory_present(void) { } #else -static void arm_memory_present(void) +static void __init arm_memory_present(void) { struct memblock_region *reg; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index b86f8933ff91..2c7cf2f9c837 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -618,8 +618,8 @@ static void __init alloc_init_section(pud_t *pud, unsigned long addr, } } -static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end, - unsigned long phys, const struct mem_type *type) +static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr, + unsigned long end, unsigned long phys, const struct mem_type *type) { pud_t *pud = pud_offset(pgd, addr); unsigned long next; diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h index c7f5169a6a54..36c8989d9de6 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h @@ -256,13 +256,13 @@ #define MX51_PAD_NANDF_RB1__GPIO3_9 IOMUX_PAD(0x4fc, 0x120, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_RB1__NANDF_RB1 IOMUX_PAD(0x4fc, 0x120, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB1__PATA_IORDY IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_RB1__SD4_CMD IOMUX_PAD(0x4fc, 0x120, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_NANDF_RB1__SD4_CMD IOMUX_PAD(0x4fc, 0x120, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL) #define MX51_PAD_NANDF_RB2__DISP2_WAIT IOMUX_PAD(0x500, 0x124, 5, 0x9a8, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_PAD_CTRL_2) #define MX51_PAD_NANDF_RB2__GPIO3_10 IOMUX_PAD(0x500, 0x124, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_RB2__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 0, __NA_, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_RB2__USBH3_H3_DP IOMUX_PAD(0x500, 0x124, 7, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB2__USBH3_H3_DP IOMUX_PAD(0x500, 0x124, 0x17, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB2__USBH3_NXT IOMUX_PAD(0x500, 0x124, 6, 0xa20, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB3__DISP1_WAIT IOMUX_PAD(0x504, 0x128, 5, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB3__ECSPI2_MISO IOMUX_PAD(0x504, 0x128, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL) @@ -270,7 +270,7 @@ #define MX51_PAD_NANDF_RB3__GPIO3_11 IOMUX_PAD(0x504, 0x128, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_RB3__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB3__USBH3_CLK IOMUX_PAD(0x504, 0x128, 6, 0x9f8, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_RB3__USBH3_H3_DM IOMUX_PAD(0x504, 0x128, 7, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB3__USBH3_H3_DM IOMUX_PAD(0x504, 0x128, 0x17, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO_NAND__GPIO_NAND IOMUX_PAD(0x514, 0x12c, 0, 0x998, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO_NAND__PATA_INTRQ IOMUX_PAD(0x514, 0x12c, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS0__GPIO3_16 IOMUX_PAD(0x518, 0x130, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) @@ -283,13 +283,13 @@ #define MX51_PAD_NANDF_CS2__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS2__PATA_CS_0 IOMUX_PAD(0x520, 0x138, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS2__SD4_CLK IOMUX_PAD(0x520, 0x138, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS) -#define MX51_PAD_NANDF_CS2__USBH3_H1_DP IOMUX_PAD(0x520, 0x138, 7, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS2__USBH3_H1_DP IOMUX_PAD(0x520, 0x138, 0x17, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13c, 2, __NA_, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_CS3__GPIO3_19 IOMUX_PAD(0x524, 0x13c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_CS3__NANDF_CS3 IOMUX_PAD(0x524, 0x13c, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS3__PATA_CS_1 IOMUX_PAD(0x524, 0x13c, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS3__SD4_DAT0 IOMUX_PAD(0x524, 0x13c, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL) -#define MX51_PAD_NANDF_CS3__USBH3_H1_DM IOMUX_PAD(0x524, 0x13c, 7, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS3__USBH3_H1_DM IOMUX_PAD(0x524, 0x13c, 0x17, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS4__FEC_TDATA1 IOMUX_PAD(0x528, 0x140, 2, __NA_, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_CS4__GPIO3_20 IOMUX_PAD(0x528, 0x140, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_CS4__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 0, __NA_, 0, NO_PAD_CTRL) @@ -316,7 +316,7 @@ #define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x974, 0, MX51_PAD_CTRL_4) #define MX51_PAD_NANDF_RDY_INT__GPIO3_24 IOMUX_PAD(0x538, 0x150, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 0, 0x938, 0, NO_PAD_CTRL) -#define MX51_PAD_NANDF_RDY_INT__SD3_CMD IOMUX_PAD(0x538, 0x150, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL) +#define MX51_PAD_NANDF_RDY_INT__SD3_CMD IOMUX_PAD(0x538, 0x150, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL) #define MX51_PAD_NANDF_D15__ECSPI2_MOSI IOMUX_PAD(0x53c, 0x154, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_NANDF_D15__GPIO3_25 IOMUX_PAD(0x53c, 0x154, 3, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_NANDF_D15__NANDF_D15 IOMUX_PAD(0x53c, 0x154, 0, __NA_, 0, NO_PAD_CTRL) @@ -672,23 +672,23 @@ #define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT6__DISP2_DAT6 IOMUX_PAD(0x774, 0x36c, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT6__FEC_TDATA1 IOMUX_PAD(0x774, 0x36c, 2, __NA_, 0, MX51_PAD_CTRL_5) -#define MX51_PAD_DISP2_DAT6__GPIO1_19 IOMUX_PAD(0x774, 0x36c, 5, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT6__GPIO1_19 IOMUX_PAD(0x774, 0x36c, 5, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_DISP2_DAT6__KEY_ROW4 IOMUX_PAD(0x774, 0x36c, 4, 0x9d0, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT6__USBH3_STP IOMUX_PAD(0x774, 0x36c, 3, 0xa24, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT7__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT7__FEC_TDATA2 IOMUX_PAD(0x778, 0x370, 2, __NA_, 0, MX51_PAD_CTRL_5) -#define MX51_PAD_DISP2_DAT7__GPIO1_29 IOMUX_PAD(0x778, 0x370, 5, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT7__GPIO1_29 IOMUX_PAD(0x778, 0x370, 5, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_DISP2_DAT7__KEY_ROW5 IOMUX_PAD(0x778, 0x370, 4, 0x9d4, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT7__USBH3_NXT IOMUX_PAD(0x778, 0x370, 3, 0xa20, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT8__DISP2_DAT8 IOMUX_PAD(0x77c, 0x374, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT8__FEC_TDATA3 IOMUX_PAD(0x77c, 0x374, 2, __NA_, 0, MX51_PAD_CTRL_5) -#define MX51_PAD_DISP2_DAT8__GPIO1_30 IOMUX_PAD(0x77c, 0x374, 5, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT8__GPIO1_30 IOMUX_PAD(0x77c, 0x374, 5, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_DISP2_DAT8__KEY_ROW6 IOMUX_PAD(0x77c, 0x374, 4, 0x9d8, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT8__USBH3_DATA0 IOMUX_PAD(0x77c, 0x374, 3, 0x9fc, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT9__AUD6_RXC IOMUX_PAD(0x780, 0x378, 4, 0x8f4, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT9__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT9__FEC_TX_EN IOMUX_PAD(0x780, 0x378, 2, __NA_, 0, MX51_PAD_CTRL_5) -#define MX51_PAD_DISP2_DAT9__GPIO1_31 IOMUX_PAD(0x780, 0x378, 5, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT9__GPIO1_31 IOMUX_PAD(0x780, 0x378, 5, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_DISP2_DAT9__USBH3_DATA1 IOMUX_PAD(0x780, 0x378, 3, 0xa00, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37c, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT10__DISP2_SER_CS IOMUX_PAD(0x784, 0x37c, 5, __NA_, 0, NO_PAD_CTRL) @@ -698,7 +698,7 @@ #define MX51_PAD_DISP2_DAT11__AUD6_TXD IOMUX_PAD(0x788, 0x380, 4, 0x8f0, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT11__FEC_RX_CLK IOMUX_PAD(0x788, 0x380, 2, 0x968, 1, NO_PAD_CTRL) -#define MX51_PAD_DISP2_DAT11__GPIO1_10 IOMUX_PAD(0x788, 0x380, 7, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT11__GPIO1_10 IOMUX_PAD(0x788, 0x380, 7, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_DISP2_DAT11__USBH3_DATA3 IOMUX_PAD(0x788, 0x380, 3, 0xa08, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT12__AUD6_RXD IOMUX_PAD(0x78c, 0x384, 4, 0x8ec, 1, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78c, 0x384, 0, __NA_, 0, NO_PAD_CTRL) @@ -746,16 +746,16 @@ #define MX51_PAD_SD1_DATA3__CSPI_SS1 IOMUX_PAD(0x7b0, 0x3a8, 2, 0x920, 1, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7b0, 0x3a8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL) #define MX51_PAD_GPIO1_0__CSPI_SS2 IOMUX_PAD(0x7b4, 0x3ac, 2, 0x924, 0, MX51_ECSPI_PAD_CTRL) -#define MX51_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_0__SD1_CD IOMUX_PAD(0x7b4, 0x3ac, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL) #define MX51_PAD_GPIO1_1__CSPI_MISO IOMUX_PAD(0x7b8, 0x3b0, 2, 0x918, 2, MX51_ECSPI_PAD_CTRL) -#define MX51_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x7b8, 0x3b0, 1, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x7b8, 0x3b0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_1__SD1_WP IOMUX_PAD(0x7b8, 0x3b0, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL) #define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(__NA_, 0x04c, 0, 0x000, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(__NA_, 0x050, 0, 0x000, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(__NA_, 0x054, 0, 0x000, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(__NA_, 0x058, 0, 0x000, 0, NO_PAD_CTRL) -#define MX51_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(__NA_, 0x3b4, 2, 0x91c, 3, MX51_ECSPI_PAD_CTRL) +#define MX51_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x7bc, 0x3b4, 2, 0x91c, 3, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_SD2_CMD__I2C1_SCL IOMUX_PAD(0x7bc, 0x3b4, 0x11, 0x9b0, 2, MX51_I2C_PAD_CTRL) #define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7bc, 0x3b4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL) #define MX51_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x7c0, 0x3b8, 2, 0x914, 3, MX51_ECSPI_PAD_CTRL) @@ -766,19 +766,19 @@ #define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7c4, 0x3bc, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL) #define MX51_PAD_SD2_DATA1__SD1_DAT5 IOMUX_PAD(0x7c8, 0x3c0, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7c8, 0x3c0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL) -#define MX51_PAD_SD2_DATA1__USBH3_H2_DP IOMUX_PAD(0x7c8, 0x3c0, 2, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA1__USBH3_H2_DP IOMUX_PAD(0x7c8, 0x3c0, 0x12, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_SD2_DATA2__SD1_DAT6 IOMUX_PAD(0x7cc, 0x3c4, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7cc, 0x3c4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL) -#define MX51_PAD_SD2_DATA2__USBH3_H2_DM IOMUX_PAD(0x7cc, 0x3c4, 2, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_SD2_DATA2__USBH3_H2_DM IOMUX_PAD(0x7cc, 0x3c4, 0x12, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x7d0, 0x3c8, 2, 0x924, 1, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_SD2_DATA3__SD1_DAT7 IOMUX_PAD(0x7d0, 0x3c8, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7d0, 0x3c8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL) #define MX51_PAD_GPIO1_2__CCM_OUT_2 IOMUX_PAD(0x7d4, 0x3cc, 5, __NA_, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO1_2__GPIO1_2 IOMUX_PAD(0x7d4, 0x3cc, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_2__GPIO1_2 IOMUX_PAD(0x7d4, 0x3cc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_2__I2C2_SCL IOMUX_PAD(0x7d4, 0x3cc, 0x12, 0x9b8, 3, MX51_I2C_PAD_CTRL) #define MX51_PAD_GPIO1_2__PLL1_BYP IOMUX_PAD(0x7d4, 0x3cc, 7, 0x90c, 1, NO_PAD_CTRL) #define MX51_PAD_GPIO1_2__PWM1_PWMO IOMUX_PAD(0x7d4, 0x3cc, 1, __NA_, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO1_3__GPIO1_3 IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_3__GPIO1_3 IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_3__I2C2_SDA IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x9bc, 3, MX51_I2C_PAD_CTRL) #define MX51_PAD_GPIO1_3__PLL2_BYP IOMUX_PAD(0x7d8, 0x3d0, 7, 0x910, 1, NO_PAD_CTRL) #define MX51_PAD_GPIO1_3__PWM2_PWMO IOMUX_PAD(0x7d8, 0x3d0, 1, __NA_, 0, NO_PAD_CTRL) @@ -786,27 +786,27 @@ #define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B IOMUX_PAD(0x7fc, 0x3d4, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_4__DISP2_EXT_CLK IOMUX_PAD(0x804, 0x3d8, 4, 0x908, 1, NO_PAD_CTRL) #define MX51_PAD_GPIO1_4__EIM_RDY IOMUX_PAD(0x804, 0x3d8, 3, 0x938, 1, NO_PAD_CTRL) -#define MX51_PAD_GPIO1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_4__WDOG1_WDOG_B IOMUX_PAD(0x804, 0x3d8, 2, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_5__CSI2_MCLK IOMUX_PAD(0x808, 0x3dc, 6, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_5__DISP2_PIN16 IOMUX_PAD(0x808, 0x3dc, 3, __NA_, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_5__WDOG2_WDOG_B IOMUX_PAD(0x808, 0x3dc, 2, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_6__DISP2_PIN17 IOMUX_PAD(0x80c, 0x3e0, 4, __NA_, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO1_6__GPIO1_6 IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_6__GPIO1_6 IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_6__REF_EN_B IOMUX_PAD(0x80c, 0x3e0, 3, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_7__CCM_OUT_0 IOMUX_PAD(0x810, 0x3e4, 3, __NA_, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_7__SD2_WP IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL) #define MX51_PAD_GPIO1_7__SPDIF_OUT1 IOMUX_PAD(0x810, 0x3e4, 2, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_8__CSI2_DATA_EN IOMUX_PAD(0x814, 0x3e8, 2, 0x99c, 2, NO_PAD_CTRL) -#define MX51_PAD_GPIO1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_8__SD2_CD IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL) #define MX51_PAD_GPIO1_8__USBH3_PWR IOMUX_PAD(0x814, 0x3e8, 1, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_9__CCM_OUT_1 IOMUX_PAD(0x818, 0x3ec, 3, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_9__DISP2_D1_CS IOMUX_PAD(0x818, 0x3ec, 2, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_9__DISP2_SER_CS IOMUX_PAD(0x818, 0x3ec, 7, __NA_, 0, NO_PAD_CTRL) -#define MX51_PAD_GPIO1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, MX51_GPIO_PAD_CTRL) #define MX51_PAD_GPIO1_9__SD2_LCTL IOMUX_PAD(0x818, 0x3ec, 6, __NA_, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO1_9__USBH3_OC IOMUX_PAD(0x818, 0x3ec, 1, __NA_, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h index 527f8fe3e31b..9761e003bde2 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h @@ -573,7 +573,7 @@ #define MX53_PAD_EIM_D28__UART2_CTS IOMUX_PAD(0x494, 0x14C, 2, __NA_, 0, MX53_UART_PAD_CTRL) #define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, NO_PAD_CTRL) #define MX53_PAD_EIM_D28__CSPI_MOSI IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, PAD_CTRL_I2C) +#define MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, NO_PAD_CTRL) #define MX53_PAD_EIM_D28__IPU_EXT_TRIG IOMUX_PAD(0x494, 0x14C, 6, __NA_, 0, NO_PAD_CTRL) #define MX53_PAD_EIM_D28__IPU_DI0_PIN13 IOMUX_PAD(0x494, 0x14C, 7, __NA_, 0, NO_PAD_CTRL) #define MX53_PAD_EIM_D29__EMI_WEIM_D_29 IOMUX_PAD(0x498, 0x150, 0, __NA_, 0, NO_PAD_CTRL) @@ -1187,7 +1187,7 @@ #define MX53_PAD_GPIO_8__ESAI1_TX5_RX0 IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, NO_PAD_CTRL) #define MX53_PAD_GPIO_8__GPIO1_8 IOMUX_PAD(0x6C8, 0x338, 1, __NA_, 0, NO_PAD_CTRL) #define MX53_PAD_GPIO_8__EPIT2_EPITO IOMUX_PAD(0x6C8, 0x338, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_8__CAN1_RXCAN IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 3, NO_PAD_CTRL) +#define MX53_PAD_GPIO_8__CAN1_RXCAN IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 2, NO_PAD_CTRL) #define MX53_PAD_GPIO_8__UART2_RXD_MUX IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, MX53_UART_PAD_CTRL) #define MX53_PAD_GPIO_8__FIRI_TXD IOMUX_PAD(0x6C8, 0x338, 5, __NA_, 0, NO_PAD_CTRL) #define MX53_PAD_GPIO_8__SPDIF_SRCLK IOMUX_PAD(0x6C8, 0x338, 6, __NA_, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index c0fe2757b695..ed8605f01155 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -9,9 +9,6 @@ obj-m := obj-n := obj- := -# OCPI interconnect support for 1710, 1610 and 5912 -obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o - # omap_device support (OMAP2+ only at the moment) obj-$(CONFIG_ARCH_OMAP2) += omap_device.o obj-$(CONFIG_ARCH_OMAP3) += omap_device.o diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index f1e46ea6b81d..0a9b9a970113 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -20,6 +20,7 @@ #include <plat/board.h> #include <plat/vram.h> #include <plat/dsp.h> +#include <plat/dma.h> #include <plat/omap-secure.h> diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index ecdb3da0dea9..987e6101267d 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -41,6 +41,15 @@ #include <plat/tc.h> +/* + * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA + * channels that an instance of the SDMA IP block can support. Used + * to size arrays. (The actual maximum on a particular SoC may be less + * than this -- for example, OMAP1 SDMA instances only support 17 logical + * DMA channels.) + */ +#define MAX_LOGICAL_DMA_CH_COUNT 32 + #undef DEBUG #ifndef CONFIG_ARCH_OMAP1 @@ -883,7 +892,7 @@ void omap_start_dma(int lch) if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch; - char dma_chan_link_map[dma_lch_count]; + char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT]; dma_chan_link_map[lch] = 1; /* Set the link register of the first channel */ @@ -916,6 +925,13 @@ void omap_start_dma(int lch) l |= OMAP_DMA_CCR_BUFFERING_DISABLE; l |= OMAP_DMA_CCR_EN; + /* + * As dma_write() uses IO accessors which are weakly ordered, there + * is no guarantee that data in coherent DMA memory will be visible + * to the DMA device. Add a memory barrier here to ensure that any + * such data is visible prior to enabling DMA. + */ + mb(); p->dma_write(l, CCR, lch); dma_chan[lch].flags |= OMAP_DMA_ACTIVE; @@ -965,9 +981,16 @@ void omap_stop_dma(int lch) p->dma_write(l, CCR, lch); } + /* + * Ensure that data transferred by DMA is visible to any access + * after DMA has been disabled. This is important for coherent + * DMA regions. + */ + mb(); + if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch = lch; - char dma_chan_link_map[dma_lch_count]; + char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT]; memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map)); do { diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 652139c0339e..c4ed35e89fbd 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -349,11 +349,12 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_start); int omap_dm_timer_stop(struct omap_dm_timer *timer) { unsigned long rate = 0; - struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data; + struct dmtimer_platform_data *pdata; if (unlikely(!timer)) return -EINVAL; + pdata = timer->pdev->dev.platform_data; if (!pdata->needs_manual_reset) rate = clk_get_rate(timer->fclk); diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index d5eb4c87db9d..4814c5b65306 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -91,6 +91,8 @@ struct omap_usb_config { u32 (*usb0_init)(unsigned nwires, unsigned is_device); u32 (*usb1_init)(unsigned nwires); u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup); + + int (*ocpi_enable)(void); }; struct omap_lcd_config { diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index b4d7ec3fbfbe..a557b8484e6c 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -32,6 +32,8 @@ extern int __init omap_init_clocksource_32k(void); +extern void __init omap_check_revision(void); + extern void omap_reserve(void); extern int omap_dss_reset(struct omap_hwmod *); diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index dc562a5c0a8a..42afb4c45517 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -442,6 +442,7 @@ struct omap_system_dma_plat_info { u32 (*dma_read)(int reg, int lch); }; +extern void __init omap_init_consistent_dma_size(void); extern void omap_set_dma_priority(int lch, int dst_port, int priority); extern int omap_request_dma(int dev_id, const char *dev_name, void (*callback)(int lch, u16 ch_status, void *data), diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 9418f00b6c38..230ff91be491 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -316,12 +316,12 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer) OMAP_TIMER_V1_SYS_STAT_OFFSET; timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET; timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET; - timer->irq_dis = 0; + timer->irq_dis = NULL; timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET; timer->func_base = timer->io_base; } else { timer->revision = 2; - timer->sys_stat = 0; + timer->sys_stat = NULL; timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS; timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET; timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR; diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 3f26db4ee8e6..14dde32cd406 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -213,11 +213,16 @@ struct omap_hwmod_addr_space { */ #define OCP_USER_MPU (1 << 0) #define OCP_USER_SDMA (1 << 1) +#define OCP_USER_DSP (1 << 2) /* omap_hwmod_ocp_if.flags bits */ #define OCPIF_SWSUP_IDLE (1 << 0) #define OCPIF_CAN_BURST (1 << 1) +/* omap_hwmod_ocp_if._int_flags possibilities */ +#define _OCPIF_INT_FLAGS_REGISTERED (1 << 0) + + /** * struct omap_hwmod_ocp_if - OCP interface data * @master: struct omap_hwmod that initiates OCP transactions on this link @@ -229,6 +234,7 @@ struct omap_hwmod_addr_space { * @width: OCP data width * @user: initiators using this interface (see OCP_USER_* macros above) * @flags: OCP interface flags (see OCPIF_* macros above) + * @_int_flags: internal flags (see _OCPIF_INT_FLAGS* macros above) * * It may also be useful to add a tag_cnt field for OCP2.x devices. * @@ -247,6 +253,7 @@ struct omap_hwmod_ocp_if { u8 width; u8 user; u8 flags; + u8 _int_flags; }; @@ -327,9 +334,9 @@ struct omap_hwmod_sysc_fields { * then this field has to be populated with the correct offset structure. */ struct omap_hwmod_class_sysconfig { - u16 rev_offs; - u16 sysc_offs; - u16 syss_offs; + u32 rev_offs; + u32 sysc_offs; + u32 syss_offs; u16 sysc_flags; struct omap_hwmod_sysc_fields *sysc_fields; u8 srst_udelay; @@ -476,6 +483,16 @@ struct omap_hwmod_class { }; /** + * struct omap_hwmod_link - internal structure linking hwmods with ocp_ifs + * @ocp_if: OCP interface structure record pointer + * @node: list_head pointing to next struct omap_hwmod_link in a list + */ +struct omap_hwmod_link { + struct omap_hwmod_ocp_if *ocp_if; + struct list_head node; +}; + +/** * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks) * @name: name of the hwmod * @class: struct omap_hwmod_class * to the class of this hwmod @@ -487,12 +504,10 @@ struct omap_hwmod_class { * @_clk: pointer to the main struct clk (filled in at runtime) * @opt_clks: other device clocks that drivers can request (0..*) * @voltdm: pointer to voltage domain (filled in at runtime) - * @masters: ptr to array of OCP ifs that this hwmod can initiate on - * @slaves: ptr to array of OCP ifs that this hwmod can respond on * @dev_attr: arbitrary device attributes that can be passed to the driver * @_sysc_cache: internal-use hwmod flags * @_mpu_rt_va: cached register target start address (internal use) - * @_mpu_port_index: cached MPU register target slave ID (internal use) + * @_mpu_port: cached MPU register target slave (internal use) * @opt_clks_cnt: number of @opt_clks * @master_cnt: number of @master entries * @slaves_cnt: number of @slave entries @@ -511,6 +526,8 @@ struct omap_hwmod_class { * * Parameter names beginning with an underscore are managed internally by * the omap_hwmod code and should not be set during initialization. + * + * @masters and @slaves are now deprecated. */ struct omap_hwmod { const char *name; @@ -529,15 +546,15 @@ struct omap_hwmod { struct omap_hwmod_opt_clk *opt_clks; char *clkdm_name; struct clockdomain *clkdm; - struct omap_hwmod_ocp_if **masters; /* connect to *_IA */ - struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */ + struct list_head master_ports; /* connect to *_IA */ + struct list_head slave_ports; /* connect to *_TA */ void *dev_attr; u32 _sysc_cache; void __iomem *_mpu_rt_va; spinlock_t _lock; struct list_head node; + struct omap_hwmod_ocp_if *_mpu_port; u16 flags; - u8 _mpu_port_index; u8 response_lat; u8 rst_lines_cnt; u8 opt_clks_cnt; @@ -549,7 +566,6 @@ struct omap_hwmod { u8 _postsetup_state; }; -int omap_hwmod_register(struct omap_hwmod **ohs); struct omap_hwmod *omap_hwmod_lookup(const char *name); int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), void *data); @@ -581,6 +597,8 @@ int omap_hwmod_softreset(struct omap_hwmod *oh); int omap_hwmod_count_resources(struct omap_hwmod *oh); int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); +int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type, + const char *name, struct resource *res); struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh); void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh); @@ -619,4 +637,6 @@ extern int omap2430_hwmod_init(void); extern int omap3xxx_hwmod_init(void); extern int omap44xx_hwmod_init(void); +extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois); + #endif diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index d50cbc6385bd..c490240bb82c 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -475,13 +475,11 @@ static int omap_device_count_resources(struct omap_device *od) static int omap_device_fill_resources(struct omap_device *od, struct resource *res) { - int c = 0; int i, r; for (i = 0; i < od->hwmods_cnt; i++) { r = omap_hwmod_fill_resources(od->hwmods[i], res); res += r; - c += r; } return 0; diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index f9a8c5341ee9..477363c163ec 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -196,8 +196,8 @@ static void __init omap_map_sram(void) * Looks like we need to preserve some bootloader code at the * beginning of SRAM for jumping to flash for reboot to work... */ - memset((void *)omap_sram_base + SRAM_BOOTLOADER_SZ, 0, - omap_sram_size - SRAM_BOOTLOADER_SZ); + memset_io(omap_sram_base + SRAM_BOOTLOADER_SZ, 0, + omap_sram_size - SRAM_BOOTLOADER_SZ); } /* diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index d2bbfd1cb0b5..daa0327381b5 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -31,15 +31,12 @@ #include <mach/hardware.h> -#include "../mach-omap2/common.h" - #ifdef CONFIG_ARCH_OMAP_OTG void __init omap_otg_init(struct omap_usb_config *config) { u32 syscon; - int status; int alt_pingroup = 0; /* NOTE: no bus or clock setup (yet?) */ @@ -104,6 +101,7 @@ omap_otg_init(struct omap_usb_config *config) #ifdef CONFIG_USB_GADGET_OMAP if (config->otg || config->register_dev) { struct platform_device *udc_device = config->udc_device; + int status; syscon &= ~DEV_IDLE_EN; udc_device->dev.platform_data = config; @@ -116,6 +114,7 @@ omap_otg_init(struct omap_usb_config *config) #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) if (config->otg || config->register_host) { struct platform_device *ohci_device = config->ohci_device; + int status; syscon &= ~HST_IDLE_EN; ohci_device->dev.platform_data = config; @@ -128,6 +127,7 @@ omap_otg_init(struct omap_usb_config *config) #ifdef CONFIG_USB_OTG if (config->otg) { struct platform_device *otg_device = config->otg_device; + int status; syscon &= ~OTG_IDLE_EN; otg_device->dev.platform_data = config; @@ -138,8 +138,6 @@ omap_otg_init(struct omap_usb_config *config) #endif pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1)); omap_writel(syscon, OTG_SYSCON_1); - - status = 0; } #else diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 8b928f9bc1c3..1013a341b0fd 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -272,16 +272,8 @@ struct platform_device s5p_device_fimc3 = { #ifdef CONFIG_S5P_DEV_G2D static struct resource s5p_g2d_resource[] = { - [0] = { - .start = S5P_PA_G2D, - .end = S5P_PA_G2D + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_2D, - .end = IRQ_2D, - .flags = IORESOURCE_IRQ, - }, + [0] = DEFINE_RES_MEM(S5P_PA_G2D, SZ_4K), + [1] = DEFINE_RES_IRQ(IRQ_2D), }; struct platform_device s5p_device_g2d = { @@ -370,7 +362,6 @@ struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = { .max_width = 4, .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), - .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL, }; struct platform_device s3c_device_hsmmc0 = { @@ -401,7 +392,6 @@ struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = { .max_width = 4, .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), - .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL, }; struct platform_device s3c_device_hsmmc1 = { @@ -434,7 +424,6 @@ struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = { .max_width = 4, .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), - .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL, }; struct platform_device s3c_device_hsmmc2 = { @@ -465,7 +454,6 @@ struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = { .max_width = 4, .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), - .clk_type = S3C_SDHCI_CLK_DIV_INTERNAL, }; struct platform_device s3c_device_hsmmc3 = { diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index e834c5ef437c..151cc9195cf6 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -33,18 +33,12 @@ enum cd_types { S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */ }; -enum clk_types { - S3C_SDHCI_CLK_DIV_INTERNAL, /* use mmc internal clock divider */ - S3C_SDHCI_CLK_DIV_EXTERNAL, /* use external clock divider */ -}; - /** * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI * @max_width: The maximum number of data bits supported. * @host_caps: Standard MMC host capabilities bit field. * @host_caps2: The second standard MMC host capabilities bit field. * @cd_type: Type of Card Detection method (see cd_types enum above) - * @clk_type: Type of clock divider method (see clk_types enum above) * @ext_cd_init: Initialize external card detect subsystem. Called on * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL. * notify_func argument is a callback to the sdhci-s3c driver @@ -69,7 +63,6 @@ struct s3c_sdhci_platdata { unsigned int host_caps2; unsigned int pm_caps; enum cd_types cd_type; - enum clk_types clk_type; int ext_cd_gpio; bool ext_cd_gpio_invert; diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c index fa78aa710ed1..b430e9946287 100644 --- a/arch/arm/plat-samsung/platformdata.c +++ b/arch/arm/plat-samsung/platformdata.c @@ -57,6 +57,4 @@ void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd, set->host_caps2 |= pd->host_caps2; if (pd->pm_caps) set->pm_caps |= pd->pm_caps; - if (pd->clk_type) - set->clk_type = pd->clk_type; } diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 858748eaa144..bc683b8219b5 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -17,6 +17,8 @@ #include <linux/sched.h> #include <linux/smp.h> #include <linux/init.h> +#include <linux/uaccess.h> +#include <linux/user.h> #include <asm/cp15.h> #include <asm/cputype.h> @@ -529,6 +531,103 @@ void vfp_flush_hwstate(struct thread_info *thread) } /* + * Save the current VFP state into the provided structures and prepare + * for entry into a new function (signal handler). + */ +int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp, + struct user_vfp_exc __user *ufp_exc) +{ + struct thread_info *thread = current_thread_info(); + struct vfp_hard_struct *hwstate = &thread->vfpstate.hard; + int err = 0; + + /* Ensure that the saved hwstate is up-to-date. */ + vfp_sync_hwstate(thread); + + /* + * Copy the floating point registers. There can be unused + * registers see asm/hwcap.h for details. + */ + err |= __copy_to_user(&ufp->fpregs, &hwstate->fpregs, + sizeof(hwstate->fpregs)); + /* + * Copy the status and control register. + */ + __put_user_error(hwstate->fpscr, &ufp->fpscr, err); + + /* + * Copy the exception registers. + */ + __put_user_error(hwstate->fpexc, &ufp_exc->fpexc, err); + __put_user_error(hwstate->fpinst, &ufp_exc->fpinst, err); + __put_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err); + + if (err) + return -EFAULT; + + /* Ensure that VFP is disabled. */ + vfp_flush_hwstate(thread); + + /* + * As per the PCS, clear the length and stride bits for function + * entry. + */ + hwstate->fpscr &= ~(FPSCR_LENGTH_MASK | FPSCR_STRIDE_MASK); + + /* + * Disable VFP in the hwstate so that we can detect if it gets + * used. + */ + hwstate->fpexc &= ~FPEXC_EN; + return 0; +} + +/* Sanitise and restore the current VFP state from the provided structures. */ +int vfp_restore_user_hwstate(struct user_vfp __user *ufp, + struct user_vfp_exc __user *ufp_exc) +{ + struct thread_info *thread = current_thread_info(); + struct vfp_hard_struct *hwstate = &thread->vfpstate.hard; + unsigned long fpexc; + int err = 0; + + /* + * If VFP has been used, then disable it to avoid corrupting + * the new thread state. + */ + if (hwstate->fpexc & FPEXC_EN) + vfp_flush_hwstate(thread); + + /* + * Copy the floating point registers. There can be unused + * registers see asm/hwcap.h for details. + */ + err |= __copy_from_user(&hwstate->fpregs, &ufp->fpregs, + sizeof(hwstate->fpregs)); + /* + * Copy the status and control register. + */ + __get_user_error(hwstate->fpscr, &ufp->fpscr, err); + + /* + * Sanitise and restore the exception registers. + */ + __get_user_error(fpexc, &ufp_exc->fpexc, err); + + /* Ensure the VFP is enabled. */ + fpexc |= FPEXC_EN; + + /* Ensure FPINST2 is invalid and the exception flag is cleared. */ + fpexc &= ~(FPEXC_EX | FPEXC_FP2V); + hwstate->fpexc = fpexc; + + __get_user_error(hwstate->fpinst, &ufp_exc->fpinst, err); + __get_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err); + + return err ? -EFAULT : 0; +} + +/* * VFP hardware can lose all context when a CPU goes offline. * As we will be running in SMP mode with CPU hotplug, we will save the * hardware state at every thread switch. We clear our held state when diff --git a/arch/mips/ath79/dev-wmac.c b/arch/mips/ath79/dev-wmac.c index e21507052066..9c717bf98ffe 100644 --- a/arch/mips/ath79/dev-wmac.c +++ b/arch/mips/ath79/dev-wmac.c @@ -58,8 +58,8 @@ static void __init ar913x_wmac_setup(void) static int ar933x_wmac_reset(void) { - ath79_device_reset_clear(AR933X_RESET_WMAC); ath79_device_reset_set(AR933X_RESET_WMAC); + ath79_device_reset_clear(AR933X_RESET_WMAC); return 0; } diff --git a/arch/mips/include/asm/mach-jz4740/irq.h b/arch/mips/include/asm/mach-jz4740/irq.h index a865c983c70a..5ad1a9c113c6 100644 --- a/arch/mips/include/asm/mach-jz4740/irq.h +++ b/arch/mips/include/asm/mach-jz4740/irq.h @@ -45,7 +45,7 @@ #define JZ4740_IRQ_LCD JZ4740_IRQ(30) /* 2nd-level interrupts */ -#define JZ4740_IRQ_DMA(x) (JZ4740_IRQ(32) + (X)) +#define JZ4740_IRQ_DMA(x) (JZ4740_IRQ(32) + (x)) #define JZ4740_IRQ_INTC_GPIO(x) (JZ4740_IRQ_GPIO0 - (x)) #define JZ4740_IRQ_GPIO(x) (JZ4740_IRQ(48) + (x)) diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index 73c0d45798de..9b02cfba7449 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -37,12 +37,6 @@ extern void tlbmiss_handler_setup_pgd(unsigned long pgd); write_c0_xcontext((unsigned long) smp_processor_id() << 51); \ } while (0) - -static inline unsigned long get_current_pgd(void) -{ - return PHYS_TO_XKSEG_CACHED((read_c0_context() >> 11) & ~0xfffUL); -} - #else /* CONFIG_MIPS_PGD_C0_CONTEXT: using pgd_current*/ /* diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 185ca00c4c84..d5a338a1739c 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -257,11 +257,8 @@ asmlinkage int sys_sigsuspend(nabi_no_regargs struct pt_regs regs) return -EFAULT; sigdelsetmask(&newset, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); current->saved_sigmask = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&newset); current->state = TASK_INTERRUPTIBLE; schedule(); @@ -286,11 +283,8 @@ asmlinkage int sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) return -EFAULT; sigdelsetmask(&newset, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); current->saved_sigmask = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&newset); current->state = TASK_INTERRUPTIBLE; schedule(); @@ -362,10 +356,7 @@ asmlinkage void sys_sigreturn(nabi_no_regargs struct pt_regs regs) goto badframe; sigdelsetmask(&blocked, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = blocked; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&blocked); sig = restore_sigcontext(®s, &frame->sf_sc); if (sig < 0) @@ -401,10 +392,7 @@ asmlinkage void sys_rt_sigreturn(nabi_no_regargs struct pt_regs regs) goto badframe; sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&set); sig = restore_sigcontext(®s, &frame->rs_uc.uc_mcontext); if (sig < 0) @@ -580,12 +568,7 @@ static int handle_signal(unsigned long sig, siginfo_t *info, if (ret) return ret; - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); - if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(¤t->blocked, sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + block_sigmask(ka, sig); return ret; } diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 06b5da392e24..ac3b8d89aae5 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -290,11 +290,8 @@ asmlinkage int sys32_sigsuspend(nabi_no_regargs struct pt_regs regs) return -EFAULT; sigdelsetmask(&newset, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); current->saved_sigmask = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&newset); current->state = TASK_INTERRUPTIBLE; schedule(); @@ -318,11 +315,8 @@ asmlinkage int sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) return -EFAULT; sigdelsetmask(&newset, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); current->saved_sigmask = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&newset); current->state = TASK_INTERRUPTIBLE; schedule(); @@ -488,10 +482,7 @@ asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs) goto badframe; sigdelsetmask(&blocked, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = blocked; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&blocked); sig = restore_sigcontext32(®s, &frame->sf_sc); if (sig < 0) @@ -529,10 +520,7 @@ asmlinkage void sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) goto badframe; sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&set); sig = restore_sigcontext32(®s, &frame->rs_uc.uc_mcontext); if (sig < 0) diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index ae29e894ab8d..86eb4b04631c 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -93,11 +93,8 @@ asmlinkage int sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) sigset_from_compat(&newset, &uset); sigdelsetmask(&newset, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); current->saved_sigmask = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&newset); current->state = TASK_INTERRUPTIBLE; schedule(); @@ -121,10 +118,7 @@ asmlinkage void sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) goto badframe; sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&set); sig = restore_sigcontext(®s, &frame->rs_uc.uc_mcontext); if (sig < 0) diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c index 4f004596a6e7..0b3393381a81 100644 --- a/arch/parisc/kernel/pdc_cons.c +++ b/arch/parisc/kernel/pdc_cons.c @@ -104,7 +104,7 @@ static int pdc_console_tty_open(struct tty_struct *tty, struct file *filp) static void pdc_console_tty_close(struct tty_struct *tty, struct file *filp) { - if (!tty->count) { + if (tty->count == 1) { del_timer_sync(&pdc_console_timer); tty_port_tty_set(&tty_port, NULL); } diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h index e648af92ced1..0e40843a1c6e 100644 --- a/arch/powerpc/include/asm/irq.h +++ b/arch/powerpc/include/asm/irq.h @@ -18,10 +18,6 @@ #include <linux/atomic.h> -/* Define a way to iterate across irqs. */ -#define for_each_irq(i) \ - for ((i) = 0; (i) < NR_IRQS; ++(i)) - extern atomic_t ppc_n_lost_interrupts; /* This number is used when no interrupt has been assigned */ diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 5ec1b2354ca6..43eb74fcedde 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -330,14 +330,10 @@ void migrate_irqs(void) alloc_cpumask_var(&mask, GFP_KERNEL); - for_each_irq(irq) { + for_each_irq_desc(irq, desc) { struct irq_data *data; struct irq_chip *chip; - desc = irq_to_desc(irq); - if (!desc) - continue; - data = irq_desc_get_irq_data(desc); if (irqd_is_per_cpu(data)) continue; diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index c957b1202bdc..5df777794403 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -23,14 +23,11 @@ void machine_kexec_mask_interrupts(void) { unsigned int i; + struct irq_desc *desc; - for_each_irq(i) { - struct irq_desc *desc = irq_to_desc(i); + for_each_irq_desc(i, desc) { struct irq_chip *chip; - if (!desc) - continue; - chip = irq_desc_get_chip(desc); if (!chip) continue; diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h index af1ab5e9a691..5c3cf2d04e41 100644 --- a/arch/powerpc/net/bpf_jit.h +++ b/arch/powerpc/net/bpf_jit.h @@ -48,7 +48,13 @@ /* * Assembly helpers from arch/powerpc/net/bpf_jit.S: */ -extern u8 sk_load_word[], sk_load_half[], sk_load_byte[], sk_load_byte_msh[]; +#define DECLARE_LOAD_FUNC(func) \ + extern u8 func[], func##_negative_offset[], func##_positive_offset[] + +DECLARE_LOAD_FUNC(sk_load_word); +DECLARE_LOAD_FUNC(sk_load_half); +DECLARE_LOAD_FUNC(sk_load_byte); +DECLARE_LOAD_FUNC(sk_load_byte_msh); #define FUNCTION_DESCR_SIZE 24 diff --git a/arch/powerpc/net/bpf_jit_64.S b/arch/powerpc/net/bpf_jit_64.S index ff4506e85cce..55ba3855a97f 100644 --- a/arch/powerpc/net/bpf_jit_64.S +++ b/arch/powerpc/net/bpf_jit_64.S @@ -31,14 +31,13 @@ * then branch directly to slow_path_XXX if required. (In fact, could * load a spare GPR with the address of slow_path_generic and pass size * as an argument, making the call site a mtlr, li and bllr.) - * - * Technically, the "is addr < 0" check is unnecessary & slowing down - * the ABS path, as it's statically checked on generation. */ .globl sk_load_word sk_load_word: cmpdi r_addr, 0 - blt bpf_error + blt bpf_slow_path_word_neg + .globl sk_load_word_positive_offset +sk_load_word_positive_offset: /* Are we accessing past headlen? */ subi r_scratch1, r_HL, 4 cmpd r_scratch1, r_addr @@ -51,7 +50,9 @@ sk_load_word: .globl sk_load_half sk_load_half: cmpdi r_addr, 0 - blt bpf_error + blt bpf_slow_path_half_neg + .globl sk_load_half_positive_offset +sk_load_half_positive_offset: subi r_scratch1, r_HL, 2 cmpd r_scratch1, r_addr blt bpf_slow_path_half @@ -61,7 +62,9 @@ sk_load_half: .globl sk_load_byte sk_load_byte: cmpdi r_addr, 0 - blt bpf_error + blt bpf_slow_path_byte_neg + .globl sk_load_byte_positive_offset +sk_load_byte_positive_offset: cmpd r_HL, r_addr ble bpf_slow_path_byte lbzx r_A, r_D, r_addr @@ -69,22 +72,20 @@ sk_load_byte: /* * BPF_S_LDX_B_MSH: ldxb 4*([offset]&0xf) - * r_addr is the offset value, already known positive + * r_addr is the offset value */ .globl sk_load_byte_msh sk_load_byte_msh: + cmpdi r_addr, 0 + blt bpf_slow_path_byte_msh_neg + .globl sk_load_byte_msh_positive_offset +sk_load_byte_msh_positive_offset: cmpd r_HL, r_addr ble bpf_slow_path_byte_msh lbzx r_X, r_D, r_addr rlwinm r_X, r_X, 2, 32-4-2, 31-2 blr -bpf_error: - /* Entered with cr0 = lt */ - li r3, 0 - /* Generated code will 'blt epilogue', returning 0. */ - blr - /* Call out to skb_copy_bits: * We'll need to back up our volatile regs first; we have * local variable space at r1+(BPF_PPC_STACK_BASIC). @@ -136,3 +137,84 @@ bpf_slow_path_byte_msh: lbz r_X, BPF_PPC_STACK_BASIC+(2*8)(r1) rlwinm r_X, r_X, 2, 32-4-2, 31-2 blr + +/* Call out to bpf_internal_load_pointer_neg_helper: + * We'll need to back up our volatile regs first; we have + * local variable space at r1+(BPF_PPC_STACK_BASIC). + * Allocate a new stack frame here to remain ABI-compliant in + * stashing LR. + */ +#define sk_negative_common(SIZE) \ + mflr r0; \ + std r0, 16(r1); \ + /* R3 goes in parameter space of caller's frame */ \ + std r_skb, (BPF_PPC_STACKFRAME+48)(r1); \ + std r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1); \ + std r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1); \ + stdu r1, -BPF_PPC_SLOWPATH_FRAME(r1); \ + /* R3 = r_skb, as passed */ \ + mr r4, r_addr; \ + li r5, SIZE; \ + bl bpf_internal_load_pointer_neg_helper; \ + /* R3 != 0 on success */ \ + addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \ + ld r0, 16(r1); \ + ld r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1); \ + ld r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1); \ + mtlr r0; \ + cmpldi r3, 0; \ + beq bpf_error_slow; /* cr0 = EQ */ \ + mr r_addr, r3; \ + ld r_skb, (BPF_PPC_STACKFRAME+48)(r1); \ + /* Great success! */ + +bpf_slow_path_word_neg: + lis r_scratch1,-32 /* SKF_LL_OFF */ + cmpd r_addr, r_scratch1 /* addr < SKF_* */ + blt bpf_error /* cr0 = LT */ + .globl sk_load_word_negative_offset +sk_load_word_negative_offset: + sk_negative_common(4) + lwz r_A, 0(r_addr) + blr + +bpf_slow_path_half_neg: + lis r_scratch1,-32 /* SKF_LL_OFF */ + cmpd r_addr, r_scratch1 /* addr < SKF_* */ + blt bpf_error /* cr0 = LT */ + .globl sk_load_half_negative_offset +sk_load_half_negative_offset: + sk_negative_common(2) + lhz r_A, 0(r_addr) + blr + +bpf_slow_path_byte_neg: + lis r_scratch1,-32 /* SKF_LL_OFF */ + cmpd r_addr, r_scratch1 /* addr < SKF_* */ + blt bpf_error /* cr0 = LT */ + .globl sk_load_byte_negative_offset +sk_load_byte_negative_offset: + sk_negative_common(1) + lbz r_A, 0(r_addr) + blr + +bpf_slow_path_byte_msh_neg: + lis r_scratch1,-32 /* SKF_LL_OFF */ + cmpd r_addr, r_scratch1 /* addr < SKF_* */ + blt bpf_error /* cr0 = LT */ + .globl sk_load_byte_msh_negative_offset +sk_load_byte_msh_negative_offset: + sk_negative_common(1) + lbz r_X, 0(r_addr) + rlwinm r_X, r_X, 2, 32-4-2, 31-2 + blr + +bpf_error_slow: + /* fabricate a cr0 = lt */ + li r_scratch1, -1 + cmpdi r_scratch1, 0 +bpf_error: + /* Entered with cr0 = lt */ + li r3, 0 + /* Generated code will 'blt epilogue', returning 0. */ + blr diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c index 73619d3aeb6c..2dc8b1484845 100644 --- a/arch/powerpc/net/bpf_jit_comp.c +++ b/arch/powerpc/net/bpf_jit_comp.c @@ -127,6 +127,9 @@ static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx) PPC_BLR(); } +#define CHOOSE_LOAD_FUNC(K, func) \ + ((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset) + /* Assemble the body code between the prologue & epilogue. */ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image, struct codegen_context *ctx, @@ -391,21 +394,16 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image, /*** Absolute loads from packet header/data ***/ case BPF_S_LD_W_ABS: - func = sk_load_word; + func = CHOOSE_LOAD_FUNC(K, sk_load_word); goto common_load; case BPF_S_LD_H_ABS: - func = sk_load_half; + func = CHOOSE_LOAD_FUNC(K, sk_load_half); goto common_load; case BPF_S_LD_B_ABS: - func = sk_load_byte; + func = CHOOSE_LOAD_FUNC(K, sk_load_byte); common_load: - /* - * Load from [K]. Reference with the (negative) - * SKF_NET_OFF/SKF_LL_OFF offsets is unsupported. - */ + /* Load from [K]. */ ctx->seen |= SEEN_DATAREF; - if ((int)K < 0) - return -ENOTSUPP; PPC_LI64(r_scratch1, func); PPC_MTLR(r_scratch1); PPC_LI32(r_addr, K); @@ -429,7 +427,7 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image, common_load_ind: /* * Load from [X + K]. Negative offsets are tested for - * in the helper functions, and result in a 'ret 0'. + * in the helper functions. */ ctx->seen |= SEEN_DATAREF | SEEN_XREG; PPC_LI64(r_scratch1, func); @@ -443,13 +441,7 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image, break; case BPF_S_LDX_B_MSH: - /* - * x86 version drops packet (RET 0) when K<0, whereas - * interpreter does allow K<0 (__load_pointer, special - * ancillary data). common_load returns ENOTSUPP if K<0, - * so we fall back to interpreter & filter works. - */ - func = sk_load_byte_msh; + func = CHOOSE_LOAD_FUNC(K, sk_load_byte_msh); goto common_load; break; diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c index d09f3e8e6867..85825b5401e5 100644 --- a/arch/powerpc/platforms/cell/axon_msi.c +++ b/arch/powerpc/platforms/cell/axon_msi.c @@ -114,7 +114,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc) pr_devel("axon_msi: woff %x roff %x msi %x\n", write_offset, msic->read_offset, msi); - if (msi < NR_IRQS && irq_get_chip_data(msi) == msic) { + if (msi < nr_irqs && irq_get_chip_data(msi) == msic) { generic_handle_irq(msi); msic->fifo_virt[idx] = cpu_to_le32(0xffffffff); } else { @@ -276,9 +276,6 @@ static int axon_msi_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) if (rc) return rc; - /* We rely on being able to stash a virq in a u16 */ - BUILD_BUG_ON(NR_IRQS > 65536); - list_for_each_entry(entry, &dev->msi_list, list) { virq = irq_create_direct_mapping(msic->irq_domain); if (virq == NO_IRQ) { @@ -392,7 +389,8 @@ static int axon_msi_probe(struct platform_device *device) } memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES); - msic->irq_domain = irq_domain_add_nomap(dn, 0, &msic_host_ops, msic); + /* We rely on being able to stash a virq in a u16, so limit irqs to < 65536 */ + msic->irq_domain = irq_domain_add_nomap(dn, 65536, &msic_host_ops, msic); if (!msic->irq_domain) { printk(KERN_ERR "axon_msi: couldn't allocate irq_domain for %s\n", dn->full_name); diff --git a/arch/powerpc/platforms/cell/beat_interrupt.c b/arch/powerpc/platforms/cell/beat_interrupt.c index f9a48af335cb..8c6dc42ecf65 100644 --- a/arch/powerpc/platforms/cell/beat_interrupt.c +++ b/arch/powerpc/platforms/cell/beat_interrupt.c @@ -248,6 +248,6 @@ void beatic_deinit_IRQ(void) { int i; - for (i = 1; i < NR_IRQS; i++) + for (i = 1; i < nr_irqs; i++) beat_destruct_irq_plug(i); } diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 66ad93de1d55..c4e630576ff2 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -57,9 +57,9 @@ static int max_real_irqs; static DEFINE_RAW_SPINLOCK(pmac_pic_lock); -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -static unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; -static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; +/* The max irq number this driver deals with is 128; see max_irqs */ +static DECLARE_BITMAP(ppc_lost_interrupts, 128); +static DECLARE_BITMAP(ppc_cached_irq_mask, 128); static int pmac_irq_cascade = -1; static struct irq_domain *pmac_pic_host; diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index aadbe4f6d537..178a5f300bc9 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -30,9 +30,9 @@ config PPC_SPLPAR two or more partitions. config EEH - bool "PCI Extended Error Handling (EEH)" if EXPERT + bool depends on PPC_PSERIES && PCI - default y if !EXPERT + default y config PSERIES_MSI bool diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c index d3be961e2ae7..10386b676d87 100644 --- a/arch/powerpc/sysdev/cpm2_pic.c +++ b/arch/powerpc/sysdev/cpm2_pic.c @@ -51,8 +51,7 @@ static intctl_cpm2_t __iomem *cpm2_intctl; static struct irq_domain *cpm2_pic_host; -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; +static unsigned long ppc_cached_irq_mask[2]; /* 2 32-bit registers */ static const u_char irq_to_siureg[] = { 1, 1, 1, 1, 1, 1, 1, 1, diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c index d5f5416be310..b724622c3a0b 100644 --- a/arch/powerpc/sysdev/mpc8xx_pic.c +++ b/arch/powerpc/sysdev/mpc8xx_pic.c @@ -18,69 +18,45 @@ extern int cpm_get_irq(struct pt_regs *regs); static struct irq_domain *mpc8xx_pic_host; -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; +static unsigned long mpc8xx_cached_irq_mask; static sysconf8xx_t __iomem *siu_reg; -int cpm_get_irq(struct pt_regs *regs); +static inline unsigned long mpc8xx_irqd_to_bit(struct irq_data *d) +{ + return 0x80000000 >> irqd_to_hwirq(d); +} static void mpc8xx_unmask_irq(struct irq_data *d) { - int bit, word; - unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d); - - bit = irq_nr & 0x1f; - word = irq_nr >> 5; - - ppc_cached_irq_mask[word] |= (1 << (31-bit)); - out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]); + mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask); } static void mpc8xx_mask_irq(struct irq_data *d) { - int bit, word; - unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d); - - bit = irq_nr & 0x1f; - word = irq_nr >> 5; - - ppc_cached_irq_mask[word] &= ~(1 << (31-bit)); - out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]); + mpc8xx_cached_irq_mask &= ~mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask); } static void mpc8xx_ack(struct irq_data *d) { - int bit; - unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d); - - bit = irq_nr & 0x1f; - out_be32(&siu_reg->sc_sipend, 1 << (31-bit)); + out_be32(&siu_reg->sc_sipend, mpc8xx_irqd_to_bit(d)); } static void mpc8xx_end_irq(struct irq_data *d) { - int bit, word; - unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d); - - bit = irq_nr & 0x1f; - word = irq_nr >> 5; - - ppc_cached_irq_mask[word] |= (1 << (31-bit)); - out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]); + mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask); } static int mpc8xx_set_irq_type(struct irq_data *d, unsigned int flow_type) { - if (flow_type & IRQ_TYPE_EDGE_FALLING) { - irq_hw_number_t hw = (unsigned int)irqd_to_hwirq(d); + /* only external IRQ senses are programmable */ + if ((flow_type & IRQ_TYPE_EDGE_FALLING) && !(irqd_to_hwirq(d) & 1)) { unsigned int siel = in_be32(&siu_reg->sc_siel); - - /* only external IRQ senses are programmable */ - if ((hw & 1) == 0) { - siel |= (0x80000000 >> hw); - out_be32(&siu_reg->sc_siel, siel); - __irq_set_handler_locked(d->irq, handle_edge_irq); - } + siel |= mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_siel, siel); + __irq_set_handler_locked(d->irq, handle_edge_irq); } return 0; } @@ -132,6 +108,9 @@ static int mpc8xx_pic_host_xlate(struct irq_domain *h, struct device_node *ct, IRQ_TYPE_EDGE_FALLING, }; + if (intspec[0] > 0x1f) + return 0; + *out_hwirq = intspec[0]; if (intsize > 1 && intspec[1] < 4) *out_flags = map_pic_senses[intspec[1]]; diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c index ea5e204e3450..cd1d18db92c6 100644 --- a/arch/powerpc/sysdev/xics/xics-common.c +++ b/arch/powerpc/sysdev/xics/xics-common.c @@ -188,6 +188,7 @@ void xics_migrate_irqs_away(void) { int cpu = smp_processor_id(), hw_cpu = hard_smp_processor_id(); unsigned int irq, virq; + struct irq_desc *desc; /* If we used to be the default server, move to the new "boot_cpuid" */ if (hw_cpu == xics_default_server) @@ -202,8 +203,7 @@ void xics_migrate_irqs_away(void) /* Allow IPIs again... */ icp_ops->set_priority(DEFAULT_PRIORITY); - for_each_irq(virq) { - struct irq_desc *desc; + for_each_irq_desc(virq, desc) { struct irq_chip *chip; long server; unsigned long flags; @@ -212,9 +212,8 @@ void xics_migrate_irqs_away(void) /* We can't set affinity on ISA interrupts */ if (virq < NUM_ISA_INTERRUPTS) continue; - desc = irq_to_desc(virq); /* We only need to migrate enabled IRQS */ - if (!desc || !desc->action) + if (!desc->action) continue; if (desc->irq_data.domain != xics_host) continue; diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 1d14cc6b79ad..c9866b0b77d8 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -81,7 +81,7 @@ config X86 select CLKEVT_I8253 select ARCH_HAVE_NMI_SAFE_CMPXCHG select GENERIC_IOMAP - select DCACHE_WORD_ACCESS if !DEBUG_PAGEALLOC + select DCACHE_WORD_ACCESS config INSTRUCTION_DECODER def_bool (KPROBES || PERF_EVENTS) diff --git a/arch/x86/boot/compressed/relocs.c b/arch/x86/boot/compressed/relocs.c index d3c0b0277666..fb7117a4ade1 100644 --- a/arch/x86/boot/compressed/relocs.c +++ b/arch/x86/boot/compressed/relocs.c @@ -403,13 +403,11 @@ static void print_absolute_symbols(void) for (i = 0; i < ehdr.e_shnum; i++) { struct section *sec = &secs[i]; char *sym_strtab; - Elf32_Sym *sh_symtab; int j; if (sec->shdr.sh_type != SHT_SYMTAB) { continue; } - sh_symtab = sec->symtab; sym_strtab = sec->link->strtab; for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Sym); j++) { Elf32_Sym *sym; diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c index 4824fb45560f..07b3a68d2d29 100644 --- a/arch/x86/ia32/ia32_aout.c +++ b/arch/x86/ia32/ia32_aout.c @@ -294,8 +294,7 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs) /* OK, This is the point of no return */ set_personality(PER_LINUX); - set_thread_flag(TIF_IA32); - current->mm->context.ia32_compat = 1; + set_personality_ia32(false); setup_new_exec(bprm); diff --git a/arch/x86/include/asm/word-at-a-time.h b/arch/x86/include/asm/word-at-a-time.h index 6fe6767b7124..e58f03b206c3 100644 --- a/arch/x86/include/asm/word-at-a-time.h +++ b/arch/x86/include/asm/word-at-a-time.h @@ -43,4 +43,37 @@ static inline unsigned long has_zero(unsigned long a) return ((a - REPEAT_BYTE(0x01)) & ~a) & REPEAT_BYTE(0x80); } +/* + * Load an unaligned word from kernel space. + * + * In the (very unlikely) case of the word being a page-crosser + * and the next page not being mapped, take the exception and + * return zeroes in the non-existing part. + */ +static inline unsigned long load_unaligned_zeropad(const void *addr) +{ + unsigned long ret, dummy; + + asm( + "1:\tmov %2,%0\n" + "2:\n" + ".section .fixup,\"ax\"\n" + "3:\t" + "lea %2,%1\n\t" + "and %3,%1\n\t" + "mov (%1),%0\n\t" + "leal %2,%%ecx\n\t" + "andl %4,%%ecx\n\t" + "shll $3,%%ecx\n\t" + "shr %%cl,%0\n\t" + "jmp 2b\n" + ".previous\n" + _ASM_EXTABLE(1b, 3b) + :"=&r" (ret),"=&c" (dummy) + :"m" (*(unsigned long *)addr), + "i" (-sizeof(unsigned long)), + "i" (sizeof(unsigned long)-1)); + return ret; +} + #endif /* _ASM_WORD_AT_A_TIME_H */ diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 1c67ca100e4c..146bb6218eec 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -580,6 +580,24 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) } } + /* re-enable TopologyExtensions if switched off by BIOS */ + if ((c->x86 == 0x15) && + (c->x86_model >= 0x10) && (c->x86_model <= 0x1f) && + !cpu_has(c, X86_FEATURE_TOPOEXT)) { + u64 val; + + if (!rdmsrl_amd_safe(0xc0011005, &val)) { + val |= 1ULL << 54; + wrmsrl_amd_safe(0xc0011005, val); + rdmsrl(0xc0011005, val); + if (val & (1ULL << 54)) { + set_cpu_cap(c, X86_FEATURE_TOPOEXT); + printk(KERN_INFO FW_INFO "CPU: Re-enabling " + "disabled Topology Extensions Support\n"); + } + } + } + cpu_detect_cache_sizes(c); /* Multi core CPU? */ diff --git a/arch/x86/platform/geode/net5501.c b/arch/x86/platform/geode/net5501.c index 66d377e334f7..646e3b5b4bb6 100644 --- a/arch/x86/platform/geode/net5501.c +++ b/arch/x86/platform/geode/net5501.c @@ -63,7 +63,7 @@ static struct gpio_led net5501_leds[] = { .name = "net5501:1", .gpio = 6, .default_trigger = "default-on", - .active_low = 1, + .active_low = 0, }, }; diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 7049a7d27c4f..330bb4d75852 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -631,7 +631,7 @@ int acpi_power_get_inferred_state(struct acpi_device *device, int *state) * We know a device's inferred power state when all the resources * required for a given D-state are 'on'. */ - for (i = ACPI_STATE_D0; i < ACPI_STATE_D3; i++) { + for (i = ACPI_STATE_D0; i < ACPI_STATE_D3_HOT; i++) { list = &device->power.states[i].resources; if (list->count < 1) continue; diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 767e2dcb9616..7417267e88fa 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -869,7 +869,7 @@ static int acpi_bus_get_power_flags(struct acpi_device *device) /* * Enumerate supported power management states */ - for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3; i++) { + for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3_HOT; i++) { struct acpi_device_power_state *ps = &device->power.states[i]; char object_name[5] = { '_', 'P', 'R', '0' + i, '\0' }; @@ -884,21 +884,18 @@ static int acpi_bus_get_power_flags(struct acpi_device *device) acpi_bus_add_power_resource(ps->resources.handles[j]); } - /* The exist of _PR3 indicates D3Cold support */ - if (i == ACPI_STATE_D3) { - status = acpi_get_handle(device->handle, object_name, &handle); - if (ACPI_SUCCESS(status)) - device->power.states[ACPI_STATE_D3_COLD].flags.valid = 1; - } - /* Evaluate "_PSx" to see if we can do explicit sets */ object_name[2] = 'S'; status = acpi_get_handle(device->handle, object_name, &handle); if (ACPI_SUCCESS(status)) ps->flags.explicit_set = 1; - /* State is valid if we have some power control */ - if (ps->resources.count || ps->flags.explicit_set) + /* + * State is valid if there are means to put the device into it. + * D3hot is only valid if _PR3 present. + */ + if (ps->resources.count || + (ps->flags.explicit_set && i < ACPI_STATE_D3_HOT)) ps->flags.valid = 1; ps->power = -1; /* Unknown - driver assigned */ diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 79a1e9dd56d9..ebaf67e4b2bc 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -394,6 +394,8 @@ static const struct pci_device_id ahci_pci_tbl[] = { .driver_data = board_ahci_yes_fbs }, /* 88se9128 */ { PCI_DEVICE(0x1b4b, 0x9125), .driver_data = board_ahci_yes_fbs }, /* 88se9125 */ + { PCI_DEVICE(0x1b4b, 0x917a), + .driver_data = board_ahci_yes_fbs }, /* 88se9172 */ { PCI_DEVICE(0x1b4b, 0x91a3), .driver_data = board_ahci_yes_fbs }, diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 0c86c77764bc..9e419e1c2006 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -280,6 +280,7 @@ static struct dev_pm_ops ahci_pm_ops = { static const struct of_device_id ahci_of_match[] = { { .compatible = "calxeda,hb-ahci", }, + { .compatible = "snps,spear-ahci", }, {}, }; MODULE_DEVICE_TABLE(of, ahci_of_match); diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 28db50b57b91..23763a1ec570 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -95,7 +95,7 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev); static void ata_dev_xfermask(struct ata_device *dev); static unsigned long ata_dev_blacklisted(const struct ata_device *dev); -atomic_t ata_print_id = ATOMIC_INIT(1); +atomic_t ata_print_id = ATOMIC_INIT(0); struct ata_force_param { const char *name; diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index c61316e9d2f7..d1fbd59ead16 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -3501,7 +3501,8 @@ static int ata_count_probe_trials_cb(struct ata_ering_entry *ent, void *void_arg u64 now = get_jiffies_64(); int *trials = void_arg; - if (ent->timestamp < now - min(now, interval)) + if ((ent->eflags & ATA_EFLAG_OLD_ER) || + (ent->timestamp < now - min(now, interval))) return -1; (*trials)++; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 93dabdcd2cbe..22226350cd0c 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3399,7 +3399,8 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht) */ shost->max_host_blocked = 1; - rc = scsi_add_host(ap->scsi_host, &ap->tdev); + rc = scsi_add_host_with_dma(ap->scsi_host, + &ap->tdev, ap->host->dev); if (rc) goto err_add; } @@ -3838,18 +3839,25 @@ void ata_sas_port_stop(struct ata_port *ap) } EXPORT_SYMBOL_GPL(ata_sas_port_stop); -int ata_sas_async_port_init(struct ata_port *ap) +/** + * ata_sas_async_probe - simply schedule probing and return + * @ap: Port to probe + * + * For batch scheduling of probe for sas attached ata devices, assumes + * the port has already been through ata_sas_port_init() + */ +void ata_sas_async_probe(struct ata_port *ap) { - int rc = ap->ops->port_start(ap); - - if (!rc) { - ap->print_id = atomic_inc_return(&ata_print_id); - __ata_port_probe(ap); - } + __ata_port_probe(ap); +} +EXPORT_SYMBOL_GPL(ata_sas_async_probe); - return rc; +int ata_sas_sync_probe(struct ata_port *ap) +{ + return ata_port_probe(ap); } -EXPORT_SYMBOL_GPL(ata_sas_async_port_init); +EXPORT_SYMBOL_GPL(ata_sas_sync_probe); + /** * ata_sas_port_init - Initialize a SATA device @@ -3866,12 +3874,10 @@ int ata_sas_port_init(struct ata_port *ap) { int rc = ap->ops->port_start(ap); - if (!rc) { - ap->print_id = atomic_inc_return(&ata_print_id); - rc = ata_port_probe(ap); - } - - return rc; + if (rc) + return rc; + ap->print_id = atomic_inc_return(&ata_print_id); + return 0; } EXPORT_SYMBOL_GPL(ata_sas_port_init); diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c index fc2db2a89a6b..3239517f4d90 100644 --- a/drivers/ata/pata_arasan_cf.c +++ b/drivers/ata/pata_arasan_cf.c @@ -943,9 +943,9 @@ static int arasan_cf_resume(struct device *dev) return 0; } +#endif static SIMPLE_DEV_PM_OPS(arasan_cf_pm_ops, arasan_cf_suspend, arasan_cf_resume); -#endif static struct platform_driver arasan_cf_driver = { .probe = arasan_cf_probe, @@ -953,9 +953,7 @@ static struct platform_driver arasan_cf_driver = { .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &arasan_cf_pm_ops, -#endif }, }; diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index ae9edca7b56d..57fd867553d7 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -75,6 +75,8 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0CF3, 0x311D) }, { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x04CA, 0x3005) }, + { USB_DEVICE(0x13d3, 0x3362) }, + { USB_DEVICE(0x0CF3, 0xE004) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -94,6 +96,8 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { } /* Terminating entry */ }; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 3311b812a0c6..9217121362e1 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -101,12 +101,16 @@ static struct usb_device_id btusb_table[] = { { USB_DEVICE(0x0c10, 0x0000) }, /* Broadcom BCM20702A0 */ + { USB_DEVICE(0x0489, 0xe042) }, { USB_DEVICE(0x0a5c, 0x21e3) }, { USB_DEVICE(0x0a5c, 0x21e6) }, { USB_DEVICE(0x0a5c, 0x21e8) }, { USB_DEVICE(0x0a5c, 0x21f3) }, { USB_DEVICE(0x413c, 0x8197) }, + /* Foxconn - Hon Hai */ + { USB_DEVICE(0x0489, 0xe033) }, + { } /* Terminating entry */ }; @@ -133,6 +137,8 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig index 0689bf6b0183..b2402eb076c7 100644 --- a/drivers/char/hw_random/Kconfig +++ b/drivers/char/hw_random/Kconfig @@ -62,7 +62,7 @@ config HW_RANDOM_AMD config HW_RANDOM_ATMEL tristate "Atmel Random Number Generator support" - depends on HW_RANDOM && ARCH_AT91SAM9G45 + depends on HW_RANDOM && HAVE_CLK default HW_RANDOM ---help--- This driver provides kernel-side support for the Random Number diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 5138927a416c..99c6b203e6cd 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -18,7 +18,7 @@ config DW_APB_TIMER config CLKSRC_DBX500_PRCMU bool "Clocksource PRCMU Timer" - depends on UX500_SOC_DB5500 || UX500_SOC_DB8500 + depends on UX500_SOC_DB8500 default y help Use the always on PRCMU Timer as clocksource diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index d25599f2a3f8..47408e802ab6 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -191,6 +191,190 @@ utf16_strncmp(const efi_char16_t *a, const efi_char16_t *b, size_t len) } } +static bool +validate_device_path(struct efi_variable *var, int match, u8 *buffer, + unsigned long len) +{ + struct efi_generic_dev_path *node; + int offset = 0; + + node = (struct efi_generic_dev_path *)buffer; + + if (len < sizeof(*node)) + return false; + + while (offset <= len - sizeof(*node) && + node->length >= sizeof(*node) && + node->length <= len - offset) { + offset += node->length; + + if ((node->type == EFI_DEV_END_PATH || + node->type == EFI_DEV_END_PATH2) && + node->sub_type == EFI_DEV_END_ENTIRE) + return true; + + node = (struct efi_generic_dev_path *)(buffer + offset); + } + + /* + * If we're here then either node->length pointed past the end + * of the buffer or we reached the end of the buffer without + * finding a device path end node. + */ + return false; +} + +static bool +validate_boot_order(struct efi_variable *var, int match, u8 *buffer, + unsigned long len) +{ + /* An array of 16-bit integers */ + if ((len % 2) != 0) + return false; + + return true; +} + +static bool +validate_load_option(struct efi_variable *var, int match, u8 *buffer, + unsigned long len) +{ + u16 filepathlength; + int i, desclength = 0, namelen; + + namelen = utf16_strnlen(var->VariableName, sizeof(var->VariableName)); + + /* Either "Boot" or "Driver" followed by four digits of hex */ + for (i = match; i < match+4; i++) { + if (var->VariableName[i] > 127 || + hex_to_bin(var->VariableName[i] & 0xff) < 0) + return true; + } + + /* Reject it if there's 4 digits of hex and then further content */ + if (namelen > match + 4) + return false; + + /* A valid entry must be at least 8 bytes */ + if (len < 8) + return false; + + filepathlength = buffer[4] | buffer[5] << 8; + + /* + * There's no stored length for the description, so it has to be + * found by hand + */ + desclength = utf16_strsize((efi_char16_t *)(buffer + 6), len - 6) + 2; + + /* Each boot entry must have a descriptor */ + if (!desclength) + return false; + + /* + * If the sum of the length of the description, the claimed filepath + * length and the original header are greater than the length of the + * variable, it's malformed + */ + if ((desclength + filepathlength + 6) > len) + return false; + + /* + * And, finally, check the filepath + */ + return validate_device_path(var, match, buffer + desclength + 6, + filepathlength); +} + +static bool +validate_uint16(struct efi_variable *var, int match, u8 *buffer, + unsigned long len) +{ + /* A single 16-bit integer */ + if (len != 2) + return false; + + return true; +} + +static bool +validate_ascii_string(struct efi_variable *var, int match, u8 *buffer, + unsigned long len) +{ + int i; + + for (i = 0; i < len; i++) { + if (buffer[i] > 127) + return false; + + if (buffer[i] == 0) + return true; + } + + return false; +} + +struct variable_validate { + char *name; + bool (*validate)(struct efi_variable *var, int match, u8 *data, + unsigned long len); +}; + +static const struct variable_validate variable_validate[] = { + { "BootNext", validate_uint16 }, + { "BootOrder", validate_boot_order }, + { "DriverOrder", validate_boot_order }, + { "Boot*", validate_load_option }, + { "Driver*", validate_load_option }, + { "ConIn", validate_device_path }, + { "ConInDev", validate_device_path }, + { "ConOut", validate_device_path }, + { "ConOutDev", validate_device_path }, + { "ErrOut", validate_device_path }, + { "ErrOutDev", validate_device_path }, + { "Timeout", validate_uint16 }, + { "Lang", validate_ascii_string }, + { "PlatformLang", validate_ascii_string }, + { "", NULL }, +}; + +static bool +validate_var(struct efi_variable *var, u8 *data, unsigned long len) +{ + int i; + u16 *unicode_name = var->VariableName; + + for (i = 0; variable_validate[i].validate != NULL; i++) { + const char *name = variable_validate[i].name; + int match; + + for (match = 0; ; match++) { + char c = name[match]; + u16 u = unicode_name[match]; + + /* All special variables are plain ascii */ + if (u > 127) + return true; + + /* Wildcard in the matching name means we've matched */ + if (c == '*') + return variable_validate[i].validate(var, + match, data, len); + + /* Case sensitive match */ + if (c != u) + break; + + /* Reached the end of the string while matching */ + if (!c) + return variable_validate[i].validate(var, + match, data, len); + } + } + + return true; +} + static efi_status_t get_var_data_locked(struct efivars *efivars, struct efi_variable *var) { @@ -324,6 +508,12 @@ efivar_store_raw(struct efivar_entry *entry, const char *buf, size_t count) return -EINVAL; } + if ((new_var->Attributes & ~EFI_VARIABLE_MASK) != 0 || + validate_var(new_var, new_var->Data, new_var->DataSize) == false) { + printk(KERN_ERR "efivars: Malformed variable content\n"); + return -EINVAL; + } + spin_lock(&efivars->lock); status = efivars->ops->set_variable(new_var->VariableName, &new_var->VendorGuid, @@ -626,6 +816,12 @@ static ssize_t efivar_create(struct file *filp, struct kobject *kobj, if (!capable(CAP_SYS_ADMIN)) return -EACCES; + if ((new_var->Attributes & ~EFI_VARIABLE_MASK) != 0 || + validate_var(new_var, new_var->Data, new_var->DataSize) == false) { + printk(KERN_ERR "efivars: Malformed variable content\n"); + return -EINVAL; + } + spin_lock(&efivars->lock); /* diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index b505b70dba05..e6162a1681f0 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -1224,6 +1224,9 @@ static int i915_emon_status(struct seq_file *m, void *unused) unsigned long temp, chipset, gfx; int ret; + if (!IS_GEN5(dev)) + return -ENODEV; + ret = mutex_lock_interruptible(&dev->struct_mutex); if (ret) return ret; diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 785f67f963ef..ba60f3c8f911 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1701,6 +1701,9 @@ void i915_update_gfx_val(struct drm_i915_private *dev_priv) unsigned long diffms; u32 count; + if (dev_priv->info->gen != 5) + return; + getrawmonotonic(&now); diff1 = timespec_sub(now, dev_priv->last_time2); @@ -2121,12 +2124,14 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) setup_timer(&dev_priv->hangcheck_timer, i915_hangcheck_elapsed, (unsigned long) dev); - spin_lock(&mchdev_lock); - i915_mch_dev = dev_priv; - dev_priv->mchdev_lock = &mchdev_lock; - spin_unlock(&mchdev_lock); + if (IS_GEN5(dev)) { + spin_lock(&mchdev_lock); + i915_mch_dev = dev_priv; + dev_priv->mchdev_lock = &mchdev_lock; + spin_unlock(&mchdev_lock); - ips_ping_for_i915_load(); + ips_ping_for_i915_load(); + } return 0; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 5908cd563400..1b1cf3b3ff51 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7072,9 +7072,6 @@ static void intel_decrease_pllclock(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int pipe = intel_crtc->pipe; - int dpll_reg = DPLL(pipe); - int dpll = I915_READ(dpll_reg); if (HAS_PCH_SPLIT(dev)) return; @@ -7087,10 +7084,15 @@ static void intel_decrease_pllclock(struct drm_crtc *crtc) * the manual case. */ if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) { + int pipe = intel_crtc->pipe; + int dpll_reg = DPLL(pipe); + u32 dpll; + DRM_DEBUG_DRIVER("downclocking LVDS\n"); assert_panel_unlocked(dev_priv, pipe); + dpll = I915_READ(dpll_reg); dpll |= DISPLAY_RATE_SELECT_FPA1; I915_WRITE(dpll_reg, dpll); intel_wait_for_vblank(dev, pipe); @@ -7098,7 +7100,6 @@ static void intel_decrease_pllclock(struct drm_crtc *crtc) if (!(dpll & DISPLAY_RATE_SELECT_FPA1)) DRM_DEBUG_DRIVER("failed to downclock LVDS!\n"); } - } /** diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index cae3e5f17a49..2d7f47b56b6a 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -136,7 +136,7 @@ static void i9xx_write_infoframe(struct drm_encoder *encoder, val &= ~VIDEO_DIP_SELECT_MASK; - I915_WRITE(VIDEO_DIP_CTL, val | port | flags); + I915_WRITE(VIDEO_DIP_CTL, VIDEO_DIP_ENABLE | val | port | flags); for (i = 0; i < len; i += 4) { I915_WRITE(VIDEO_DIP_DATA, *data); diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 30e2c82101de..9c71183629c2 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -750,7 +750,7 @@ static const struct dmi_system_id intel_no_lvds[] = { .ident = "Hewlett-Packard t5745", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_BOARD_NAME, "hp t5745"), + DMI_MATCH(DMI_PRODUCT_NAME, "hp t5745"), }, }, { @@ -758,7 +758,7 @@ static const struct dmi_system_id intel_no_lvds[] = { .ident = "Hewlett-Packard st5747", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_BOARD_NAME, "hp st5747"), + DMI_MATCH(DMI_PRODUCT_NAME, "hp st5747"), }, }, { diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c index 7814a760c164..284bd25d5d21 100644 --- a/drivers/gpu/drm/nouveau/nouveau_acpi.c +++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c @@ -270,7 +270,7 @@ static bool nouveau_dsm_detect(void) struct acpi_buffer buffer = {sizeof(acpi_method_name), acpi_method_name}; struct pci_dev *pdev = NULL; int has_dsm = 0; - int has_optimus; + int has_optimus = 0; int vga_count = 0; bool guid_valid; int retval; diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 80963d05b54a..0be4a815e706 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -6156,10 +6156,14 @@ dcb_fake_connectors(struct nvbios *bios) /* heuristic: if we ever get a non-zero connector field, assume * that all the indices are valid and we don't need fake them. + * + * and, as usual, a blacklist of boards with bad bios data.. */ - for (i = 0; i < dcbt->entries; i++) { - if (dcbt->entry[i].connector) - return; + if (!nv_match_device(bios->dev, 0x0392, 0x107d, 0x20a2)) { + for (i = 0; i < dcbt->entries; i++) { + if (dcbt->entry[i].connector) + return; + } } /* no useful connector info available, we need to make it up diff --git a/drivers/gpu/drm/nouveau/nouveau_hdmi.c b/drivers/gpu/drm/nouveau/nouveau_hdmi.c index 59ea1c14eca0..c3de36384522 100644 --- a/drivers/gpu/drm/nouveau/nouveau_hdmi.c +++ b/drivers/gpu/drm/nouveau/nouveau_hdmi.c @@ -32,7 +32,9 @@ static bool hdmi_sor(struct drm_encoder *encoder) { struct drm_nouveau_private *dev_priv = encoder->dev->dev_private; - if (dev_priv->chipset < 0xa3) + if (dev_priv->chipset < 0xa3 || + dev_priv->chipset == 0xaa || + dev_priv->chipset == 0xac) return false; return true; } diff --git a/drivers/gpu/drm/nouveau/nv10_gpio.c b/drivers/gpu/drm/nouveau/nv10_gpio.c index 550ad3fcf0af..9d79180069df 100644 --- a/drivers/gpu/drm/nouveau/nv10_gpio.c +++ b/drivers/gpu/drm/nouveau/nv10_gpio.c @@ -65,7 +65,7 @@ nv10_gpio_drive(struct drm_device *dev, int line, int dir, int out) if (line < 10) { line = (line - 2) * 4; reg = NV_PCRTC_GPIO_EXT; - mask = 0x00000003 << ((line - 2) * 4); + mask = 0x00000003; data = (dir << 1) | out; } else if (line < 14) { diff --git a/drivers/gpu/drm/nouveau/nvc0_fb.c b/drivers/gpu/drm/nouveau/nvc0_fb.c index 5bf55038fd92..f704e942372e 100644 --- a/drivers/gpu/drm/nouveau/nvc0_fb.c +++ b/drivers/gpu/drm/nouveau/nvc0_fb.c @@ -54,6 +54,11 @@ nvc0_mfb_isr(struct drm_device *dev) nvc0_mfb_subp_isr(dev, unit, subp); units &= ~(1 << unit); } + + /* we do something horribly wrong and upset PMFB a lot, so mask off + * interrupts from it after the first one until it's fixed + */ + nv_mask(dev, 0x000640, 0x02000000, 0x00000000); } static void diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index ea7df16e2f84..5992502a3448 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -241,8 +241,8 @@ int radeon_wb_init(struct radeon_device *rdev) rdev->wb.use_event = true; } } - /* always use writeback/events on NI */ - if (ASIC_IS_DCE5(rdev)) { + /* always use writeback/events on NI, APUs */ + if (rdev->family >= CHIP_PALM) { rdev->wb.enabled = true; rdev->wb.use_event = true; } diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 0d3141fbbc20..b9d512331ed4 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -52,7 +52,7 @@ module_param_named(tjmax, force_tjmax, int, 0444); MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius"); #define BASE_SYSFS_ATTR_NO 2 /* Sysfs Base attr no for coretemp */ -#define NUM_REAL_CORES 16 /* Number of Real cores per cpu */ +#define NUM_REAL_CORES 32 /* Number of Real cores per cpu */ #define CORETEMP_NAME_LENGTH 17 /* String Length of attrs */ #define MAX_CORE_ATTRS 4 /* Maximum no of basic attrs */ #define TOTAL_ATTRS (MAX_CORE_ATTRS + 1) @@ -709,6 +709,10 @@ static void __cpuinit put_core_offline(unsigned int cpu) indx = TO_ATTR_NO(cpu); + /* The core id is too big, just return */ + if (indx > MAX_CORE_DATA - 1) + return; + if (pdata->core_data[indx] && pdata->core_data[indx]->cpu == cpu) coretemp_remove_core(pdata, &pdev->dev, indx); diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index f086131cb1c7..c811289b61e2 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -324,7 +324,7 @@ static s32 pch_i2c_wait_for_xfer_complete(struct i2c_algo_pch_data *adap) { long ret; ret = wait_event_timeout(pch_event, - (adap->pch_event_flag != 0), msecs_to_jiffies(50)); + (adap->pch_event_flag != 0), msecs_to_jiffies(1000)); if (ret == 0) { pch_err(adap, "timeout: %x\n", adap->pch_event_flag); @@ -1063,6 +1063,6 @@ module_exit(pch_pci_exit); MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semico ML7213/ML7223/ML7831 IOH I2C"); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Tomoya MORINAGA. <tomoya-linux@dsn.lapis-semi.com>"); +MODULE_AUTHOR("Tomoya MORINAGA. <tomoya.rohm@gmail.com>"); module_param(pch_i2c_speed, int, (S_IRUSR | S_IWUSR)); module_param(pch_clk, int, (S_IRUSR | S_IWUSR)); diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 3d471d56bf15..76b8af44f634 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -227,6 +227,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, return -EINVAL; init_completion(&i2c->cmd_complete); + i2c->cmd_err = 0; flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0; @@ -252,6 +253,9 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, if (i2c->cmd_err == -ENXIO) mxs_i2c_reset(i2c); + else + writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, + i2c->regs + MXS_I2C_QUEUECTRL_CLR); dev_dbg(i2c->dev, "Done with err=%d\n", i2c->cmd_err); @@ -299,8 +303,6 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) MXS_I2C_CTRL1_SLAVE_STOP_IRQ | MXS_I2C_CTRL1_SLAVE_IRQ)) /* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */ i2c->cmd_err = -EIO; - else - i2c->cmd_err = 0; is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) & MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0; @@ -384,8 +386,6 @@ static int __devexit mxs_i2c_remove(struct platform_device *pdev) if (ret) return -EBUSY; - writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, - i2c->regs + MXS_I2C_QUEUECTRL_CLR); writel(MXS_I2C_CTRL0_SFTRST, i2c->regs + MXS_I2C_CTRL0_SET); platform_set_drvdata(pdev, NULL); diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 04be9f82e14b..eb8ad538c79f 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -546,8 +546,7 @@ static int i2c_pnx_controller_suspend(struct platform_device *pdev, { struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev); - /* FIXME: shouldn't this be clk_disable? */ - clk_enable(alg_data->clk); + clk_disable(alg_data->clk); return 0; } diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index e978635e60f0..55e5ea62ccee 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -516,6 +516,14 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, if (likely(i2c_dev->msg_err == I2C_ERR_NONE)) return 0; + /* + * NACK interrupt is generated before the I2C controller generates the + * STOP condition on the bus. So wait for 2 clock periods before resetting + * the controller so that STOP condition has been delivered properly. + */ + if (i2c_dev->msg_err == I2C_ERR_NO_ACK) + udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->bus_clk_rate)); + tegra_i2c_init(i2c_dev); if (i2c_dev->msg_err == I2C_ERR_NO_ACK) { if (msg->flags & I2C_M_IGNORE_NAK) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 8081a0a5d602..a4b14a41cbf4 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -274,7 +274,8 @@ static int synaptics_set_advanced_gesture_mode(struct psmouse *psmouse) static unsigned char param = 0xc8; struct synaptics_data *priv = psmouse->private; - if (!SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) + if (!(SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) || + SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c))) return 0; if (psmouse_sliced_command(psmouse, SYN_QUE_MODEL)) diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 2a2141915aa0..75838d7710ce 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -489,10 +489,10 @@ config TOUCHSCREEN_TI_TSCADC config TOUCHSCREEN_ATMEL_TSADCC tristate "Atmel Touchscreen Interface" - depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 + depends on ARCH_AT91 help Say Y here if you have a 4-wire touchscreen connected to the - ADC Controller on your Atmel SoC (such as the AT91SAM9RL). + ADC Controller on your Atmel SoC. If unsure, say N. diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 97e73e555d11..17e2b472e16d 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1727,8 +1727,7 @@ int bitmap_create(struct mddev *mddev) bitmap->chunkshift = (ffz(~mddev->bitmap_info.chunksize) - BITMAP_BLOCK_SHIFT); - /* now that chunksize and chunkshift are set, we can use these macros */ - chunks = (blocks + bitmap->chunkshift - 1) >> + chunks = (blocks + (1 << bitmap->chunkshift) - 1) >> bitmap->chunkshift; pages = (chunks + PAGE_COUNTER_RATIO - 1) / PAGE_COUNTER_RATIO; diff --git a/drivers/md/bitmap.h b/drivers/md/bitmap.h index 55ca5aec84e4..b44b0aba2d47 100644 --- a/drivers/md/bitmap.h +++ b/drivers/md/bitmap.h @@ -101,9 +101,6 @@ typedef __u16 bitmap_counter_t; #define BITMAP_BLOCK_SHIFT 9 -/* how many blocks per chunk? (this is variable) */ -#define CHUNK_BLOCK_RATIO(bitmap) ((bitmap)->mddev->bitmap_info.chunksize >> BITMAP_BLOCK_SHIFT) - #endif /* diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 11e44386fa9b..d875bfa56ad5 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -648,23 +648,6 @@ config EZX_PCAP This enables the PCAP ASIC present on EZX Phones. This is needed for MMC, TouchScreen, Sound, USB, etc.. -config AB5500_CORE - bool "ST-Ericsson AB5500 Mixed Signal Power Management chip" - depends on ABX500_CORE && MFD_DB5500_PRCMU - select MFD_CORE - help - Select this option to enable access to AB5500 power management - chip. This connects to the db5500 chip via the I2C bus via PRCMU. - This chip embeds various other multimedia funtionalities as well. - -config AB5500_DEBUG - bool "Enable debug info via debugfs" - depends on AB5500_CORE && DEBUG_FS - default y if DEBUG_FS - help - Select this option if you want debug information from the AB5500 - using the debug filesystem, debugfs. - config AB8500_CORE bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" depends on GENERIC_HARDIRQS && ABX500_CORE @@ -711,16 +694,6 @@ config MFD_DB8500_PRCMU system controller running an XP70 microprocessor, which is accessed through a register map. -config MFD_DB5500_PRCMU - bool "ST-Ericsson DB5500 Power Reset Control Management Unit" - depends on UX500_SOC_DB5500 - select MFD_CORE - help - Select this option to enable support for the DB5500 Power Reset - and Control Management Unit. This is basically an autonomous - system controller running an XP70 microprocessor, which is accessed - through a register map. - config MFD_CS5535 tristate "Support for CS5535 and CS5536 southbridge core functions" select MFD_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 05fa538c5efe..669ba7d85a36 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -87,15 +87,12 @@ obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o obj-$(CONFIG_ABX500_CORE) += abx500-core.o obj-$(CONFIG_AB3100_CORE) += ab3100-core.o obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o -obj-$(CONFIG_AB5500_CORE) += ab5500-core.o -obj-$(CONFIG_AB5500_DEBUG) += ab5500-debugfs.o obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o obj-$(CONFIG_MFD_DB8500_PRCMU) += db8500-prcmu.o # ab8500-i2c need to come after db8500-prcmu (which provides the channel) obj-$(CONFIG_AB8500_I2C_CORE) += ab8500-i2c.o -obj-$(CONFIG_MFD_DB5500_PRCMU) += db5500-prcmu.o obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o obj-$(CONFIG_PMIC_ADP5520) += adp5520.o obj-$(CONFIG_LPC_SCH) += lpc_sch.o diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c deleted file mode 100644 index 54d0fe40845f..000000000000 --- a/drivers/mfd/ab5500-core.c +++ /dev/null @@ -1,1439 +0,0 @@ -/* - * Copyright (C) 2007-2011 ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - * Low-level core for exclusive access to the AB5500 IC on the I2C bus - * and some basic chip-configuration. - * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com> - * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> - * Author: Mattias Wallin <mattias.wallin@stericsson.com> - * Author: Rickard Andersson <rickard.andersson@stericsson.com> - * Author: Karl Komierowski <karl.komierowski@stericsson.com> - * Author: Bibek Basu <bibek.basu@stericsson.com> - * - * TODO: Event handling with irq_chip. Waiting for PRCMU fw support. - */ - -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/device.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/random.h> -#include <linux/mfd/abx500.h> -#include <linux/mfd/abx500/ab5500.h> -#include <linux/list.h> -#include <linux/bitops.h> -#include <linux/spinlock.h> -#include <linux/mfd/core.h> -#include <linux/mfd/db5500-prcmu.h> - -#include "ab5500-core.h" -#include "ab5500-debugfs.h" - -#define AB5500_NUM_EVENT_REG 23 -#define AB5500_IT_LATCH0_REG 0x40 -#define AB5500_IT_MASK0_REG 0x60 - -/* - * Permissible register ranges for reading and writing per device and bank. - * - * The ranges must be listed in increasing address order, and no overlaps are - * allowed. It is assumed that write permission implies read permission - * (i.e. only RO and RW permissions should be used). Ranges with write - * permission must not be split up. - */ - -#define NO_RANGE {.count = 0, .range = NULL,} -static struct ab5500_i2c_banks ab5500_bank_ranges[AB5500_NUM_DEVICES] = { - [AB5500_DEVID_USB] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_USB, - .nranges = 12, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x01, - .last = 0x01, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x80, - .last = 0x83, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x87, - .last = 0x8A, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x8B, - .last = 0x8B, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x91, - .last = 0x92, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x93, - .last = 0x93, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x94, - .last = 0x94, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xA8, - .last = 0xB0, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xB2, - .last = 0xB2, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xB4, - .last = 0xBC, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xBF, - .last = 0xBF, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xC1, - .last = 0xC5, - .perm = AB5500_PERM_RO, - }, - }, - }, - }, - }, - [AB5500_DEVID_ADC] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_ADC, - .nranges = 6, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x1F, - .last = 0x22, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x23, - .last = 0x24, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x26, - .last = 0x2D, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x2F, - .last = 0x34, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x37, - .last = 0x57, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x58, - .last = 0x58, - .perm = AB5500_PERM_RO, - }, - }, - }, - }, - }, - [AB5500_DEVID_LEDS] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_LED, - .nranges = 1, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x0C, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, - [AB5500_DEVID_VIDEO] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_VDENC, - .nranges = 12, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x08, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x09, - .last = 0x09, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x0A, - .last = 0x12, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x15, - .last = 0x19, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x1B, - .last = 0x21, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x27, - .last = 0x2C, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x41, - .last = 0x41, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x45, - .last = 0x5B, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x5D, - .last = 0x5D, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x69, - .last = 0x69, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x6C, - .last = 0x6D, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x80, - .last = 0x81, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, - [AB5500_DEVID_REGULATORS] = { - .nbanks = 2, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_STARTUP, - .nranges = 12, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x01, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x1F, - .last = 0x1F, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x2E, - .last = 0x2E, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x2F, - .last = 0x30, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x50, - .last = 0x51, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x60, - .last = 0x61, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x66, - .last = 0x8A, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x8C, - .last = 0x96, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xAA, - .last = 0xB4, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xB7, - .last = 0xBF, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xC1, - .last = 0xCA, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xD3, - .last = 0xE0, - .perm = AB5500_PERM_RW, - }, - }, - }, - { - .bankid = AB5500_BANK_SIM_USBSIM, - .nranges = 1, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x13, - .last = 0x19, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, - [AB5500_DEVID_SIM] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_SIM_USBSIM, - .nranges = 1, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x13, - .last = 0x19, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, - [AB5500_DEVID_RTC] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_RTC, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x04, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x06, - .last = 0x0C, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, - [AB5500_DEVID_CHARGER] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_CHG, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x11, - .last = 0x11, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x12, - .last = 0x1B, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, - [AB5500_DEVID_FUELGAUGE] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_FG_BATTCOM_ACC, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x0B, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x0C, - .last = 0x10, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, - [AB5500_DEVID_VIBRATOR] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_VIBRA, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x10, - .last = 0x13, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xFE, - .last = 0xFE, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, - [AB5500_DEVID_CODEC] = { - .nbanks = 1, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_AUDIO_HEADSETUSB, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x48, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xEB, - .last = 0xFB, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, - [AB5500_DEVID_POWER] = { - .nbanks = 2, - .bank = (struct ab5500_i2c_ranges []) { - { - .bankid = AB5500_BANK_STARTUP, - .nranges = 1, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x30, - .last = 0x30, - .perm = AB5500_PERM_RW, - }, - }, - }, - { - .bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP, - .nranges = 1, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x01, - .last = 0x01, - .perm = AB5500_PERM_RW, - }, - }, - }, - }, - }, -}; - -#define AB5500_IRQ(bank, bit) ((bank) * 8 + (bit)) - -/* I appologize for the resource names beeing a mix of upper case - * and lower case but I want them to be exact as the documentation */ -static struct mfd_cell ab5500_devs[AB5500_NUM_DEVICES] = { - [AB5500_DEVID_LEDS] = { - .name = "ab5500-leds", - .id = AB5500_DEVID_LEDS, - }, - [AB5500_DEVID_POWER] = { - .name = "ab5500-power", - .id = AB5500_DEVID_POWER, - }, - [AB5500_DEVID_REGULATORS] = { - .name = "ab5500-regulator", - .id = AB5500_DEVID_REGULATORS, - }, - [AB5500_DEVID_SIM] = { - .name = "ab5500-sim", - .id = AB5500_DEVID_SIM, - .num_resources = 1, - .resources = (struct resource[]) { - { - .name = "SIMOFF", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(2, 0), /*rising*/ - .end = AB5500_IRQ(2, 1), /*falling*/ - }, - }, - }, - [AB5500_DEVID_RTC] = { - .name = "ab5500-rtc", - .id = AB5500_DEVID_RTC, - .num_resources = 1, - .resources = (struct resource[]) { - { - .name = "RTC_Alarm", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(1, 7), - .end = AB5500_IRQ(1, 7), - } - }, - }, - [AB5500_DEVID_CHARGER] = { - .name = "ab5500-charger", - .id = AB5500_DEVID_CHARGER, - }, - [AB5500_DEVID_ADC] = { - .name = "ab5500-adc", - .id = AB5500_DEVID_ADC, - .num_resources = 10, - .resources = (struct resource[]) { - { - .name = "TRIGGER-0", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 0), - .end = AB5500_IRQ(0, 0), - }, - { - .name = "TRIGGER-1", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 1), - .end = AB5500_IRQ(0, 1), - }, - { - .name = "TRIGGER-2", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 2), - .end = AB5500_IRQ(0, 2), - }, - { - .name = "TRIGGER-3", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 3), - .end = AB5500_IRQ(0, 3), - }, - { - .name = "TRIGGER-4", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 4), - .end = AB5500_IRQ(0, 4), - }, - { - .name = "TRIGGER-5", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 5), - .end = AB5500_IRQ(0, 5), - }, - { - .name = "TRIGGER-6", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 6), - .end = AB5500_IRQ(0, 6), - }, - { - .name = "TRIGGER-7", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 7), - .end = AB5500_IRQ(0, 7), - }, - { - .name = "TRIGGER-VBAT", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 8), - .end = AB5500_IRQ(0, 8), - }, - { - .name = "TRIGGER-VBAT-TXON", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(0, 9), - .end = AB5500_IRQ(0, 9), - }, - }, - }, - [AB5500_DEVID_FUELGAUGE] = { - .name = "ab5500-fuelgauge", - .id = AB5500_DEVID_FUELGAUGE, - .num_resources = 6, - .resources = (struct resource[]) { - { - .name = "Batt_attach", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(7, 5), - .end = AB5500_IRQ(7, 5), - }, - { - .name = "Batt_removal", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(7, 6), - .end = AB5500_IRQ(7, 6), - }, - { - .name = "UART_framing", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(7, 7), - .end = AB5500_IRQ(7, 7), - }, - { - .name = "UART_overrun", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(8, 0), - .end = AB5500_IRQ(8, 0), - }, - { - .name = "UART_Rdy_RX", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(8, 1), - .end = AB5500_IRQ(8, 1), - }, - { - .name = "UART_Rdy_TX", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(8, 2), - .end = AB5500_IRQ(8, 2), - }, - }, - }, - [AB5500_DEVID_VIBRATOR] = { - .name = "ab5500-vibrator", - .id = AB5500_DEVID_VIBRATOR, - }, - [AB5500_DEVID_CODEC] = { - .name = "ab5500-codec", - .id = AB5500_DEVID_CODEC, - .num_resources = 3, - .resources = (struct resource[]) { - { - .name = "audio_spkr1_ovc", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(9, 5), - .end = AB5500_IRQ(9, 5), - }, - { - .name = "audio_plllocked", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(9, 6), - .end = AB5500_IRQ(9, 6), - }, - { - .name = "audio_spkr2_ovc", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(17, 4), - .end = AB5500_IRQ(17, 4), - }, - }, - }, - [AB5500_DEVID_USB] = { - .name = "ab5500-usb", - .id = AB5500_DEVID_USB, - .num_resources = 36, - .resources = (struct resource[]) { - { - .name = "Link_Update", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(22, 1), - .end = AB5500_IRQ(22, 1), - }, - { - .name = "DCIO", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(8, 3), - .end = AB5500_IRQ(8, 4), - }, - { - .name = "VBUS_R", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(8, 5), - .end = AB5500_IRQ(8, 5), - }, - { - .name = "VBUS_F", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(8, 6), - .end = AB5500_IRQ(8, 6), - }, - { - .name = "CHGstate_10_PCVBUSchg", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(8, 7), - .end = AB5500_IRQ(8, 7), - }, - { - .name = "DCIOreverse_ovc", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(9, 0), - .end = AB5500_IRQ(9, 0), - }, - { - .name = "USBCharDetDone", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(9, 1), - .end = AB5500_IRQ(9, 1), - }, - { - .name = "DCIO_no_limit", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(9, 2), - .end = AB5500_IRQ(9, 2), - }, - { - .name = "USB_suspend", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(9, 3), - .end = AB5500_IRQ(9, 3), - }, - { - .name = "DCIOreverse_fwdcurrent", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(9, 4), - .end = AB5500_IRQ(9, 4), - }, - { - .name = "Vbus_Imeasmax_change", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(9, 5), - .end = AB5500_IRQ(9, 6), - }, - { - .name = "OVV", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(14, 5), - .end = AB5500_IRQ(14, 5), - }, - { - .name = "USBcharging_NOTok", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(15, 3), - .end = AB5500_IRQ(15, 3), - }, - { - .name = "usb_adp_sensoroff", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(15, 6), - .end = AB5500_IRQ(15, 6), - }, - { - .name = "usb_adp_probeplug", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(15, 7), - .end = AB5500_IRQ(15, 7), - }, - { - .name = "usb_adp_sinkerror", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(16, 0), - .end = AB5500_IRQ(16, 6), - }, - { - .name = "usb_adp_sourceerror", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(16, 1), - .end = AB5500_IRQ(16, 1), - }, - { - .name = "usb_idgnd_r", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(16, 2), - .end = AB5500_IRQ(16, 2), - }, - { - .name = "usb_idgnd_f", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(16, 3), - .end = AB5500_IRQ(16, 3), - }, - { - .name = "usb_iddetR1", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(16, 4), - .end = AB5500_IRQ(16, 5), - }, - { - .name = "usb_iddetR2", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(16, 6), - .end = AB5500_IRQ(16, 7), - }, - { - .name = "usb_iddetR3", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(17, 0), - .end = AB5500_IRQ(17, 1), - }, - { - .name = "usb_iddetR4", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(17, 2), - .end = AB5500_IRQ(17, 3), - }, - { - .name = "CharTempWindowOk", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(17, 7), - .end = AB5500_IRQ(18, 0), - }, - { - .name = "USB_SprDetect", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(18, 1), - .end = AB5500_IRQ(18, 1), - }, - { - .name = "usb_adp_probe_unplug", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(18, 2), - .end = AB5500_IRQ(18, 2), - }, - { - .name = "VBUSChDrop", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(18, 3), - .end = AB5500_IRQ(18, 4), - }, - { - .name = "dcio_char_rec_done", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(18, 5), - .end = AB5500_IRQ(18, 5), - }, - { - .name = "Charging_stopped_by_temp", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(18, 6), - .end = AB5500_IRQ(18, 6), - }, - { - .name = "CHGstate_11_SafeModeVBUS", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(21, 1), - .end = AB5500_IRQ(21, 2), - }, - { - .name = "CHGstate_12_comletedVBUS", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(21, 2), - .end = AB5500_IRQ(21, 2), - }, - { - .name = "CHGstate_13_completedVBUS", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(21, 3), - .end = AB5500_IRQ(21, 3), - }, - { - .name = "CHGstate_14_FullChgDCIO", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(21, 4), - .end = AB5500_IRQ(21, 4), - }, - { - .name = "CHGstate_15_SafeModeDCIO", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(21, 5), - .end = AB5500_IRQ(21, 5), - }, - { - .name = "CHGstate_16_OFFsuspendDCIO", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(21, 6), - .end = AB5500_IRQ(21, 6), - }, - { - .name = "CHGstate_17_completedDCIO", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(21, 7), - .end = AB5500_IRQ(21, 7), - }, - }, - }, - [AB5500_DEVID_OTP] = { - .name = "ab5500-otp", - .id = AB5500_DEVID_OTP, - }, - [AB5500_DEVID_VIDEO] = { - .name = "ab5500-video", - .id = AB5500_DEVID_VIDEO, - .num_resources = 1, - .resources = (struct resource[]) { - { - .name = "plugTVdet", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(22, 2), - .end = AB5500_IRQ(22, 2), - }, - }, - }, - [AB5500_DEVID_DBIECI] = { - .name = "ab5500-dbieci", - .id = AB5500_DEVID_DBIECI, - .num_resources = 10, - .resources = (struct resource[]) { - { - .name = "COLL", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(14, 0), - .end = AB5500_IRQ(14, 0), - }, - { - .name = "RESERR", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(14, 1), - .end = AB5500_IRQ(14, 1), - }, - { - .name = "FRAERR", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(14, 2), - .end = AB5500_IRQ(14, 2), - }, - { - .name = "COMERR", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(14, 3), - .end = AB5500_IRQ(14, 3), - }, - { - .name = "BSI_indicator", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(14, 4), - .end = AB5500_IRQ(14, 4), - }, - { - .name = "SPDSET", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(14, 6), - .end = AB5500_IRQ(14, 6), - }, - { - .name = "DSENT", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(14, 7), - .end = AB5500_IRQ(14, 7), - }, - { - .name = "DREC", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(15, 0), - .end = AB5500_IRQ(15, 0), - }, - { - .name = "ACCINT", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(15, 1), - .end = AB5500_IRQ(15, 1), - }, - { - .name = "NOPINT", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(15, 2), - .end = AB5500_IRQ(15, 2), - }, - }, - }, - [AB5500_DEVID_ONSWA] = { - .name = "ab5500-onswa", - .id = AB5500_DEVID_ONSWA, - .num_resources = 2, - .resources = (struct resource[]) { - { - .name = "ONSWAn_rising", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(1, 3), - .end = AB5500_IRQ(1, 3), - }, - { - .name = "ONSWAn_falling", - .flags = IORESOURCE_IRQ, - .start = AB5500_IRQ(1, 4), - .end = AB5500_IRQ(1, 4), - }, - }, - }, -}; - -/* - * Functionality for getting/setting register values. - */ -int ab5500_get_register_interruptible_raw(struct ab5500 *ab, - u8 bank, u8 reg, - u8 *value) -{ - int err; - - if (bank >= AB5500_NUM_BANKS) - return -EINVAL; - - err = mutex_lock_interruptible(&ab->access_mutex); - if (err) - return err; - err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, reg, value, 1); - - mutex_unlock(&ab->access_mutex); - return err; -} - -static int get_register_page_interruptible(struct ab5500 *ab, u8 bank, - u8 first_reg, u8 *regvals, u8 numregs) -{ - int err; - - if (bank >= AB5500_NUM_BANKS) - return -EINVAL; - - err = mutex_lock_interruptible(&ab->access_mutex); - if (err) - return err; - - while (numregs) { - /* The hardware limit for get page is 4 */ - u8 curnum = min_t(u8, numregs, 4u); - - err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, - first_reg, regvals, curnum); - if (err) - goto out; - - numregs -= curnum; - first_reg += curnum; - regvals += curnum; - } - -out: - mutex_unlock(&ab->access_mutex); - return err; -} - -int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank, - u8 reg, u8 bitmask, u8 bitvalues) -{ - int err = 0; - - if (bank >= AB5500_NUM_BANKS) - return -EINVAL; - - if (bitmask) { - u8 buf; - - err = mutex_lock_interruptible(&ab->access_mutex); - if (err) - return err; - - if (bitmask == 0xFF) /* No need to read in this case. */ - buf = bitvalues; - else { /* Read and modify the register value. */ - err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, - reg, &buf, 1); - if (err) - return err; - - buf = ((~bitmask & buf) | (bitmask & bitvalues)); - } - /* Write the new value. */ - err = db5500_prcmu_abb_write(bankinfo[bank].slave_addr, reg, - &buf, 1); - - mutex_unlock(&ab->access_mutex); - } - return err; -} - -static int -set_register_interruptible(struct ab5500 *ab, u8 bank, u8 reg, u8 value) -{ - return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg, - 0xff, value); -} - -/* - * Read/write permission checking functions. - */ -static const struct ab5500_i2c_ranges *get_bankref(u8 devid, u8 bank) -{ - u8 i; - - if (devid < AB5500_NUM_DEVICES) { - for (i = 0; i < ab5500_bank_ranges[devid].nbanks; i++) { - if (ab5500_bank_ranges[devid].bank[i].bankid == bank) - return &ab5500_bank_ranges[devid].bank[i]; - } - } - return NULL; -} - -static bool page_write_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg) -{ - u8 i; /* range loop index */ - const struct ab5500_i2c_ranges *bankref; - - bankref = get_bankref(devid, bank); - if (bankref == NULL || last_reg < first_reg) - return false; - - for (i = 0; i < bankref->nranges; i++) { - if (first_reg < bankref->range[i].first) - break; - if ((last_reg <= bankref->range[i].last) && - (bankref->range[i].perm & AB5500_PERM_WR)) - return true; - } - return false; -} - -static bool reg_write_allowed(u8 devid, u8 bank, u8 reg) -{ - return page_write_allowed(devid, bank, reg, reg); -} - -static bool page_read_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg) -{ - u8 i; - const struct ab5500_i2c_ranges *bankref; - - bankref = get_bankref(devid, bank); - if (bankref == NULL || last_reg < first_reg) - return false; - - - /* Find the range (if it exists in the list) that includes first_reg. */ - for (i = 0; i < bankref->nranges; i++) { - if (first_reg < bankref->range[i].first) - return false; - if (first_reg <= bankref->range[i].last) - break; - } - /* Make sure that the entire range up to and including last_reg is - * readable. This may span several of the ranges in the list. - */ - while ((i < bankref->nranges) && - (bankref->range[i].perm & AB5500_PERM_RD)) { - if (last_reg <= bankref->range[i].last) - return true; - if ((++i >= bankref->nranges) || - (bankref->range[i].first != - (bankref->range[i - 1].last + 1))) { - break; - } - } - return false; -} - -static bool reg_read_allowed(u8 devid, u8 bank, u8 reg) -{ - return page_read_allowed(devid, bank, reg, reg); -} - - -/* - * The exported register access functionality. - */ -static int ab5500_get_chip_id(struct device *dev) -{ - struct ab5500 *ab = dev_get_drvdata(dev->parent); - - return (int)ab->chip_id; -} - -static int ab5500_mask_and_set_register_interruptible(struct device *dev, - u8 bank, u8 reg, u8 bitmask, u8 bitvalues) -{ - struct ab5500 *ab; - struct platform_device *pdev = to_platform_device(dev); - - if ((AB5500_NUM_BANKS <= bank) || - !reg_write_allowed(pdev->id, bank, reg)) - return -EINVAL; - - ab = dev_get_drvdata(dev->parent); - return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg, - bitmask, bitvalues); -} - -static int ab5500_set_register_interruptible(struct device *dev, u8 bank, - u8 reg, u8 value) -{ - return ab5500_mask_and_set_register_interruptible(dev, bank, reg, 0xFF, - value); -} - -static int ab5500_get_register_interruptible(struct device *dev, u8 bank, - u8 reg, u8 *value) -{ - struct ab5500 *ab; - struct platform_device *pdev = to_platform_device(dev); - - if ((AB5500_NUM_BANKS <= bank) || - !reg_read_allowed(pdev->id, bank, reg)) - return -EINVAL; - - ab = dev_get_drvdata(dev->parent); - return ab5500_get_register_interruptible_raw(ab, bank, reg, value); -} - -static int ab5500_get_register_page_interruptible(struct device *dev, u8 bank, - u8 first_reg, u8 *regvals, u8 numregs) -{ - struct ab5500 *ab; - struct platform_device *pdev = to_platform_device(dev); - - if ((AB5500_NUM_BANKS <= bank) || - !page_read_allowed(pdev->id, bank, - first_reg, (first_reg + numregs - 1))) - return -EINVAL; - - ab = dev_get_drvdata(dev->parent); - return get_register_page_interruptible(ab, bank, first_reg, regvals, - numregs); -} - -static int -ab5500_event_registers_startup_state_get(struct device *dev, u8 *event) -{ - struct ab5500 *ab; - - ab = dev_get_drvdata(dev->parent); - if (!ab->startup_events_read) - return -EAGAIN; /* Try again later */ - - memcpy(event, ab->startup_events, AB5500_NUM_EVENT_REG); - return 0; -} - -static struct abx500_ops ab5500_ops = { - .get_chip_id = ab5500_get_chip_id, - .get_register = ab5500_get_register_interruptible, - .set_register = ab5500_set_register_interruptible, - .get_register_page = ab5500_get_register_page_interruptible, - .set_register_page = NULL, - .mask_and_set_register = ab5500_mask_and_set_register_interruptible, - .event_registers_startup_state_get = - ab5500_event_registers_startup_state_get, - .startup_irq_enabled = NULL, -}; - -/* - * ab5500_setup : Basic set-up, datastructure creation/destruction - * and I2C interface.This sets up a default config - * in the AB5500 chip so that it will work as expected. - * @ab : Pointer to ab5500 structure - * @settings : Pointer to struct abx500_init_settings - * @size : Size of init data - */ -static int __init ab5500_setup(struct ab5500 *ab, - struct abx500_init_settings *settings, unsigned int size) -{ - int err = 0; - int i; - - for (i = 0; i < size; i++) { - err = ab5500_mask_and_set_register_interruptible_raw(ab, - settings[i].bank, - settings[i].reg, - 0xFF, settings[i].setting); - if (err) - goto exit_no_setup; - - /* If event mask register update the event mask in ab5500 */ - if ((settings[i].bank == AB5500_BANK_IT) && - (AB5500_MASK_BASE <= settings[i].reg) && - (settings[i].reg <= AB5500_MASK_END)) { - ab->mask[settings[i].reg - AB5500_MASK_BASE] = - settings[i].setting; - } - } -exit_no_setup: - return err; -} - -struct ab_family_id { - u8 id; - char *name; -}; - -static const struct ab_family_id ids[] __initdata = { - /* AB5500 */ - { - .id = AB5500_1_0, - .name = "1.0" - }, - { - .id = AB5500_1_1, - .name = "1.1" - }, - /* Terminator */ - { - .id = 0x00, - } -}; - -static int __init ab5500_probe(struct platform_device *pdev) -{ - struct ab5500 *ab; - struct ab5500_platform_data *ab5500_plf_data = - pdev->dev.platform_data; - int err; - int i; - - ab = kzalloc(sizeof(struct ab5500), GFP_KERNEL); - if (!ab) { - dev_err(&pdev->dev, - "could not allocate ab5500 device\n"); - return -ENOMEM; - } - - /* Initialize data structure */ - mutex_init(&ab->access_mutex); - mutex_init(&ab->irq_lock); - ab->dev = &pdev->dev; - - platform_set_drvdata(pdev, ab); - - /* Read chip ID register */ - err = ab5500_get_register_interruptible_raw(ab, - AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP, - AB5500_CHIP_ID, &ab->chip_id); - if (err) { - dev_err(&pdev->dev, "could not communicate with the analog " - "baseband chip\n"); - goto exit_no_detect; - } - - for (i = 0; ids[i].id != 0x0; i++) { - if (ids[i].id == ab->chip_id) { - snprintf(&ab->chip_name[0], sizeof(ab->chip_name) - 1, - "AB5500 %s", ids[i].name); - break; - } - } - if (ids[i].id == 0x0) { - dev_err(&pdev->dev, "unknown analog baseband chip id: 0x%x\n", - ab->chip_id); - dev_err(&pdev->dev, "driver not started!\n"); - goto exit_no_detect; - } - - /* Clear and mask all interrupts */ - for (i = 0; i < AB5500_NUM_IRQ_REGS; i++) { - u8 latchreg = AB5500_IT_LATCH0_REG + i; - u8 maskreg = AB5500_IT_MASK0_REG + i; - u8 val; - - ab5500_get_register_interruptible_raw(ab, AB5500_BANK_IT, - latchreg, &val); - set_register_interruptible(ab, AB5500_BANK_IT, maskreg, 0xff); - ab->mask[i] = ab->oldmask[i] = 0xff; - } - - err = abx500_register_ops(&pdev->dev, &ab5500_ops); - if (err) { - dev_err(&pdev->dev, "ab5500_register ops error\n"); - goto exit_no_detect; - } - - /* Set up and register the platform devices. */ - for (i = 0; i < AB5500_NUM_DEVICES; i++) { - ab5500_devs[i].platform_data = ab5500_plf_data->dev_data[i]; - ab5500_devs[i].pdata_size = - sizeof(ab5500_plf_data->dev_data[i]); - } - - err = mfd_add_devices(&pdev->dev, 0, ab5500_devs, - ARRAY_SIZE(ab5500_devs), NULL, - ab5500_plf_data->irq.base); - if (err) { - dev_err(&pdev->dev, "ab5500_mfd_add_device error\n"); - goto exit_no_detect; - } - - err = ab5500_setup(ab, ab5500_plf_data->init_settings, - ab5500_plf_data->init_settings_sz); - if (err) { - dev_err(&pdev->dev, "ab5500_setup error\n"); - goto exit_no_detect; - } - - ab5500_setup_debugfs(ab); - - dev_info(&pdev->dev, "detected AB chip: %s\n", &ab->chip_name[0]); - return 0; - -exit_no_detect: - kfree(ab); - return err; -} - -static int __exit ab5500_remove(struct platform_device *pdev) -{ - struct ab5500 *ab = platform_get_drvdata(pdev); - - ab5500_remove_debugfs(); - mfd_remove_devices(&pdev->dev); - kfree(ab); - return 0; -} - -static struct platform_driver ab5500_driver = { - .driver = { - .name = "ab5500-core", - .owner = THIS_MODULE, - }, - .remove = __exit_p(ab5500_remove), -}; - -static int __init ab5500_core_init(void) -{ - return platform_driver_probe(&ab5500_driver, ab5500_probe); -} - -static void __exit ab5500_core_exit(void) -{ - platform_driver_unregister(&ab5500_driver); -} - -subsys_initcall(ab5500_core_init); -module_exit(ab5500_core_exit); - -MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>"); -MODULE_DESCRIPTION("AB5500 core driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/ab5500-debugfs.c b/drivers/mfd/ab5500-debugfs.c deleted file mode 100644 index 72006940937a..000000000000 --- a/drivers/mfd/ab5500-debugfs.c +++ /dev/null @@ -1,807 +0,0 @@ -/* - * Copyright (C) 2011 ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - * Debugfs support for the AB5500 MFD driver - */ - -#include <linux/module.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/mfd/abx500.h> -#include <linux/mfd/abx500/ab5500.h> -#include <linux/uaccess.h> - -#include "ab5500-core.h" -#include "ab5500-debugfs.h" - -static struct ab5500_i2c_ranges ab5500_reg_ranges[AB5500_NUM_BANKS] = { - [AB5500_BANK_LED] = { - .bankid = AB5500_BANK_LED, - .nranges = 1, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x0C, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_ADC] = { - .bankid = AB5500_BANK_ADC, - .nranges = 6, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x1F, - .last = 0x22, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x23, - .last = 0x24, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x26, - .last = 0x2D, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x2F, - .last = 0x34, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x37, - .last = 0x57, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x58, - .last = 0x58, - .perm = AB5500_PERM_RO, - }, - }, - }, - [AB5500_BANK_RTC] = { - .bankid = AB5500_BANK_RTC, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x04, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x06, - .last = 0x0C, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_STARTUP] = { - .bankid = AB5500_BANK_STARTUP, - .nranges = 12, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x01, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x1F, - .last = 0x1F, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x2E, - .last = 0x2E, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x2F, - .last = 0x30, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x50, - .last = 0x51, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x60, - .last = 0x61, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x66, - .last = 0x8A, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x8C, - .last = 0x96, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xAA, - .last = 0xB4, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xB7, - .last = 0xBF, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xC1, - .last = 0xCA, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xD3, - .last = 0xE0, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_DBI_ECI] = { - .bankid = AB5500_BANK_DBI_ECI, - .nranges = 3, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x07, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x10, - .last = 0x10, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x13, - .last = 0x13, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_CHG] = { - .bankid = AB5500_BANK_CHG, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x11, - .last = 0x11, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x12, - .last = 0x1B, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_FG_BATTCOM_ACC] = { - .bankid = AB5500_BANK_FG_BATTCOM_ACC, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x0B, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x0C, - .last = 0x10, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_USB] = { - .bankid = AB5500_BANK_USB, - .nranges = 12, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x01, - .last = 0x01, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x80, - .last = 0x83, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x87, - .last = 0x8A, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x8B, - .last = 0x8B, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x91, - .last = 0x92, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x93, - .last = 0x93, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x94, - .last = 0x94, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xA8, - .last = 0xB0, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xB2, - .last = 0xB2, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xB4, - .last = 0xBC, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xBF, - .last = 0xBF, - .perm = AB5500_PERM_RO, - }, - { - .first = 0xC1, - .last = 0xC5, - .perm = AB5500_PERM_RO, - }, - }, - }, - [AB5500_BANK_IT] = { - .bankid = AB5500_BANK_IT, - .nranges = 4, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x02, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x20, - .last = 0x36, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x40, - .last = 0x56, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x60, - .last = 0x76, - .perm = AB5500_PERM_RO, - }, - }, - }, - [AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = { - .bankid = AB5500_BANK_VDDDIG_IO_I2C_CLK_TST, - .nranges = 7, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x02, - .last = 0x02, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x12, - .last = 0x12, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x30, - .last = 0x34, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x40, - .last = 0x44, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x50, - .last = 0x54, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x60, - .last = 0x64, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x70, - .last = 0x74, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = { - .bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP, - .nranges = 13, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x01, - .last = 0x01, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x02, - .last = 0x02, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x0D, - .last = 0x0F, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x1C, - .last = 0x1C, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x1E, - .last = 0x1E, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x20, - .last = 0x21, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x25, - .last = 0x25, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x28, - .last = 0x2A, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x30, - .last = 0x33, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x40, - .last = 0x43, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x50, - .last = 0x53, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x60, - .last = 0x63, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x70, - .last = 0x73, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_VIBRA] = { - .bankid = AB5500_BANK_VIBRA, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x10, - .last = 0x13, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xFE, - .last = 0xFE, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_AUDIO_HEADSETUSB] = { - .bankid = AB5500_BANK_AUDIO_HEADSETUSB, - .nranges = 2, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x48, - .perm = AB5500_PERM_RW, - }, - { - .first = 0xEB, - .last = 0xFB, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_SIM_USBSIM] = { - .bankid = AB5500_BANK_SIM_USBSIM, - .nranges = 1, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x13, - .last = 0x19, - .perm = AB5500_PERM_RW, - }, - }, - }, - [AB5500_BANK_VDENC] = { - .bankid = AB5500_BANK_VDENC, - .nranges = 12, - .range = (struct ab5500_reg_range[]) { - { - .first = 0x00, - .last = 0x08, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x09, - .last = 0x09, - .perm = AB5500_PERM_RO, - }, - { - .first = 0x0A, - .last = 0x12, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x15, - .last = 0x19, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x1B, - .last = 0x21, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x27, - .last = 0x2C, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x41, - .last = 0x41, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x45, - .last = 0x5B, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x5D, - .last = 0x5D, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x69, - .last = 0x69, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x6C, - .last = 0x6D, - .perm = AB5500_PERM_RW, - }, - { - .first = 0x80, - .last = 0x81, - .perm = AB5500_PERM_RW, - }, - }, - }, -}; - -static int ab5500_registers_print(struct seq_file *s, void *p) -{ - struct ab5500 *ab = s->private; - unsigned int i; - u8 bank = (u8)ab->debug_bank; - - seq_printf(s, "ab5500 register values:\n"); - for (bank = 0; bank < AB5500_NUM_BANKS; bank++) { - seq_printf(s, " bank %u, %s (0x%x):\n", bank, - bankinfo[bank].name, - bankinfo[bank].slave_addr); - for (i = 0; i < ab5500_reg_ranges[bank].nranges; i++) { - u8 reg; - int err; - - for (reg = ab5500_reg_ranges[bank].range[i].first; - reg <= ab5500_reg_ranges[bank].range[i].last; - reg++) { - u8 value; - - err = ab5500_get_register_interruptible_raw(ab, - bank, reg, - &value); - if (err < 0) { - dev_err(ab->dev, "get_reg failed %d" - "bank 0x%x reg 0x%x\n", - err, bank, reg); - return err; - } - - err = seq_printf(s, "[%d/0x%02X]: 0x%02X\n", - bank, reg, value); - if (err < 0) { - dev_err(ab->dev, - "seq_printf overflow\n"); - /* - * Error is not returned here since - * the output is wanted in any case - */ - return 0; - } - } - } - } - return 0; -} - -static int ab5500_registers_open(struct inode *inode, struct file *file) -{ - return single_open(file, ab5500_registers_print, inode->i_private); -} - -static const struct file_operations ab5500_registers_fops = { - .open = ab5500_registers_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static int ab5500_bank_print(struct seq_file *s, void *p) -{ - struct ab5500 *ab = s->private; - - seq_printf(s, "%d\n", ab->debug_bank); - return 0; -} - -static int ab5500_bank_open(struct inode *inode, struct file *file) -{ - return single_open(file, ab5500_bank_print, inode->i_private); -} - -static ssize_t ab5500_bank_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; - unsigned long user_bank; - int err; - - /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf) - 1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_bank); - if (err) - return -EINVAL; - - if (user_bank >= AB5500_NUM_BANKS) { - dev_err(ab->dev, - "debugfs error input > number of banks\n"); - return -EINVAL; - } - - ab->debug_bank = user_bank; - - return buf_size; -} - -static int ab5500_address_print(struct seq_file *s, void *p) -{ - struct ab5500 *ab = s->private; - - seq_printf(s, "0x%02X\n", ab->debug_address); - return 0; -} - -static int ab5500_address_open(struct inode *inode, struct file *file) -{ - return single_open(file, ab5500_address_print, inode->i_private); -} - -static ssize_t ab5500_address_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; - unsigned long user_address; - int err; - - /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf) - 1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_address); - if (err) - return -EINVAL; - if (user_address > 0xff) { - dev_err(ab->dev, - "debugfs error input > 0xff\n"); - return -EINVAL; - } - ab->debug_address = user_address; - return buf_size; -} - -static int ab5500_val_print(struct seq_file *s, void *p) -{ - struct ab5500 *ab = s->private; - int err; - u8 regvalue; - - err = ab5500_get_register_interruptible_raw(ab, (u8)ab->debug_bank, - (u8)ab->debug_address, ®value); - if (err) { - dev_err(ab->dev, "get_reg failed %d, bank 0x%x" - ", reg 0x%x\n", err, ab->debug_bank, - ab->debug_address); - return -EINVAL; - } - seq_printf(s, "0x%02X\n", regvalue); - - return 0; -} - -static int ab5500_val_open(struct inode *inode, struct file *file) -{ - return single_open(file, ab5500_val_print, inode->i_private); -} - -static ssize_t ab5500_val_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; - unsigned long user_val; - int err; - u8 regvalue; - - /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf)-1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_val); - if (err) - return -EINVAL; - if (user_val > 0xff) { - dev_err(ab->dev, - "debugfs error input > 0xff\n"); - return -EINVAL; - } - err = ab5500_mask_and_set_register_interruptible_raw( - ab, (u8)ab->debug_bank, - (u8)ab->debug_address, 0xFF, (u8)user_val); - if (err) - return -EINVAL; - - ab5500_get_register_interruptible_raw(ab, (u8)ab->debug_bank, - (u8)ab->debug_address, ®value); - if (err) - return -EINVAL; - - return buf_size; -} - -static const struct file_operations ab5500_bank_fops = { - .open = ab5500_bank_open, - .write = ab5500_bank_write, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static const struct file_operations ab5500_address_fops = { - .open = ab5500_address_open, - .write = ab5500_address_write, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static const struct file_operations ab5500_val_fops = { - .open = ab5500_val_open, - .write = ab5500_val_write, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static struct dentry *ab5500_dir; -static struct dentry *ab5500_reg_file; -static struct dentry *ab5500_bank_file; -static struct dentry *ab5500_address_file; -static struct dentry *ab5500_val_file; - -void __init ab5500_setup_debugfs(struct ab5500 *ab) -{ - ab->debug_bank = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP; - ab->debug_address = AB5500_CHIP_ID; - - ab5500_dir = debugfs_create_dir("ab5500", NULL); - if (!ab5500_dir) - goto exit_no_debugfs; - - ab5500_reg_file = debugfs_create_file("all-bank-registers", - S_IRUGO, ab5500_dir, ab, &ab5500_registers_fops); - if (!ab5500_reg_file) - goto exit_destroy_dir; - - ab5500_bank_file = debugfs_create_file("register-bank", - (S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_bank_fops); - if (!ab5500_bank_file) - goto exit_destroy_reg; - - ab5500_address_file = debugfs_create_file("register-address", - (S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_address_fops); - if (!ab5500_address_file) - goto exit_destroy_bank; - - ab5500_val_file = debugfs_create_file("register-value", - (S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_val_fops); - if (!ab5500_val_file) - goto exit_destroy_address; - - return; - -exit_destroy_address: - debugfs_remove(ab5500_address_file); -exit_destroy_bank: - debugfs_remove(ab5500_bank_file); -exit_destroy_reg: - debugfs_remove(ab5500_reg_file); -exit_destroy_dir: - debugfs_remove(ab5500_dir); -exit_no_debugfs: - dev_err(ab->dev, "failed to create debugfs entries.\n"); - return; -} - -void __exit ab5500_remove_debugfs(void) -{ - debugfs_remove(ab5500_val_file); - debugfs_remove(ab5500_address_file); - debugfs_remove(ab5500_bank_file); - debugfs_remove(ab5500_reg_file); - debugfs_remove(ab5500_dir); -} diff --git a/drivers/mfd/ab5500-debugfs.h b/drivers/mfd/ab5500-debugfs.h deleted file mode 100644 index 7330a9b6afa6..000000000000 --- a/drivers/mfd/ab5500-debugfs.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2011 ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - * Debugfs interface to the AB5500 core driver - */ - -#ifdef CONFIG_DEBUG_FS - -void ab5500_setup_debugfs(struct ab5500 *ab); -void ab5500_remove_debugfs(void); - -#else /* !CONFIG_DEBUG_FS */ - -static inline void ab5500_setup_debugfs(struct ab5500 *ab) -{ -} - -static inline void ab5500_remove_debugfs(void) -{ -} - -#endif diff --git a/drivers/mfd/db5500-prcmu.c b/drivers/mfd/db5500-prcmu.c deleted file mode 100644 index bb115b2f04e9..000000000000 --- a/drivers/mfd/db5500-prcmu.c +++ /dev/null @@ -1,451 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License Terms: GNU General Public License v2 - * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> - * - * U5500 PRCM Unit interface driver - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/spinlock.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/mutex.h> -#include <linux/completion.h> -#include <linux/irq.h> -#include <linux/jiffies.h> -#include <linux/bitops.h> -#include <linux/interrupt.h> -#include <linux/mfd/dbx500-prcmu.h> -#include <mach/hardware.h> -#include <mach/irqs.h> -#include <mach/db5500-regs.h> -#include "dbx500-prcmu-regs.h" - -#define _PRCM_MB_HEADER (tcdm_base + 0xFE8) -#define PRCM_REQ_MB0_HEADER (_PRCM_MB_HEADER + 0x0) -#define PRCM_REQ_MB1_HEADER (_PRCM_MB_HEADER + 0x1) -#define PRCM_REQ_MB2_HEADER (_PRCM_MB_HEADER + 0x2) -#define PRCM_REQ_MB3_HEADER (_PRCM_MB_HEADER + 0x3) -#define PRCM_REQ_MB4_HEADER (_PRCM_MB_HEADER + 0x4) -#define PRCM_REQ_MB5_HEADER (_PRCM_MB_HEADER + 0x5) -#define PRCM_REQ_MB6_HEADER (_PRCM_MB_HEADER + 0x6) -#define PRCM_REQ_MB7_HEADER (_PRCM_MB_HEADER + 0x7) -#define PRCM_ACK_MB0_HEADER (_PRCM_MB_HEADER + 0x8) -#define PRCM_ACK_MB1_HEADER (_PRCM_MB_HEADER + 0x9) -#define PRCM_ACK_MB2_HEADER (_PRCM_MB_HEADER + 0xa) -#define PRCM_ACK_MB3_HEADER (_PRCM_MB_HEADER + 0xb) -#define PRCM_ACK_MB4_HEADER (_PRCM_MB_HEADER + 0xc) -#define PRCM_ACK_MB5_HEADER (_PRCM_MB_HEADER + 0xd) -#define PRCM_ACK_MB6_HEADER (_PRCM_MB_HEADER + 0xe) -#define PRCM_ACK_MB7_HEADER (_PRCM_MB_HEADER + 0xf) - -/* Req Mailboxes */ -#define PRCM_REQ_MB0 (tcdm_base + 0xFD8) -#define PRCM_REQ_MB1 (tcdm_base + 0xFCC) -#define PRCM_REQ_MB2 (tcdm_base + 0xFC4) -#define PRCM_REQ_MB3 (tcdm_base + 0xFC0) -#define PRCM_REQ_MB4 (tcdm_base + 0xF98) -#define PRCM_REQ_MB5 (tcdm_base + 0xF90) -#define PRCM_REQ_MB6 (tcdm_base + 0xF8C) -#define PRCM_REQ_MB7 (tcdm_base + 0xF84) - -/* Ack Mailboxes */ -#define PRCM_ACK_MB0 (tcdm_base + 0xF38) -#define PRCM_ACK_MB1 (tcdm_base + 0xF30) -#define PRCM_ACK_MB2 (tcdm_base + 0xF24) -#define PRCM_ACK_MB3 (tcdm_base + 0xF20) -#define PRCM_ACK_MB4 (tcdm_base + 0xF1C) -#define PRCM_ACK_MB5 (tcdm_base + 0xF14) -#define PRCM_ACK_MB6 (tcdm_base + 0xF0C) -#define PRCM_ACK_MB7 (tcdm_base + 0xF08) - -enum mb_return_code { - RC_SUCCESS, - RC_FAIL, -}; - -/* Mailbox 0 headers. */ -enum mb0_header { - /* request */ - RMB0H_PWR_STATE_TRANS = 1, - RMB0H_WAKE_UP_CFG, - RMB0H_RD_WAKE_UP_ACK, - /* acknowledge */ - AMB0H_WAKE_UP = 1, -}; - -/* Mailbox 5 headers. */ -enum mb5_header { - MB5H_I2C_WRITE = 1, - MB5H_I2C_READ, -}; - -/* Request mailbox 5 fields. */ -#define PRCM_REQ_MB5_I2C_SLAVE (PRCM_REQ_MB5 + 0) -#define PRCM_REQ_MB5_I2C_REG (PRCM_REQ_MB5 + 1) -#define PRCM_REQ_MB5_I2C_SIZE (PRCM_REQ_MB5 + 2) -#define PRCM_REQ_MB5_I2C_DATA (PRCM_REQ_MB5 + 4) - -/* Acknowledge mailbox 5 fields. */ -#define PRCM_ACK_MB5_RETURN_CODE (PRCM_ACK_MB5 + 0) -#define PRCM_ACK_MB5_I2C_DATA (PRCM_ACK_MB5 + 4) - -#define NUM_MB 8 -#define MBOX_BIT BIT -#define ALL_MBOX_BITS (MBOX_BIT(NUM_MB) - 1) - -/* -* Used by MCDE to setup all necessary PRCMU registers -*/ -#define PRCMU_RESET_DSIPLL 0x00004000 -#define PRCMU_UNCLAMP_DSIPLL 0x00400800 - -/* HDMI CLK MGT PLLSW=001 (PLLSOC0), PLLDIV=0x8, = 50 Mhz*/ -#define PRCMU_DSI_CLOCK_SETTING 0x00000128 -/* TVCLK_MGT PLLSW=001 (PLLSOC0) PLLDIV=0x13, = 19.05 MHZ */ -#define PRCMU_DSI_LP_CLOCK_SETTING 0x00000135 -#define PRCMU_PLLDSI_FREQ_SETTING 0x00020121 -#define PRCMU_DSI_PLLOUT_SEL_SETTING 0x00000002 -#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV 0x03000201 -#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV 0x00000101 - -#define PRCMU_ENABLE_PLLDSI 0x00000001 -#define PRCMU_DISABLE_PLLDSI 0x00000000 - -#define PRCMU_DSI_RESET_SW 0x00000003 -#define PRCMU_RESOUTN0_PIN 0x00000001 -#define PRCMU_RESOUTN1_PIN 0x00000002 -#define PRCMU_RESOUTN2_PIN 0x00000004 - -#define PRCMU_PLLDSI_LOCKP_LOCKED 0x3 - -/* - * mb0_transfer - state needed for mailbox 0 communication. - * @lock: The transaction lock. - */ -static struct { - spinlock_t lock; -} mb0_transfer; - -/* - * mb5_transfer - state needed for mailbox 5 communication. - * @lock: The transaction lock. - * @work: The transaction completion structure. - * @ack: Reply ("acknowledge") data. - */ -static struct { - struct mutex lock; - struct completion work; - struct { - u8 header; - u8 status; - u8 value[4]; - } ack; -} mb5_transfer; - -/* PRCMU TCDM base IO address. */ -static __iomem void *tcdm_base; - -/** - * db5500_prcmu_abb_read() - Read register value(s) from the ABB. - * @slave: The I2C slave address. - * @reg: The (start) register address. - * @value: The read out value(s). - * @size: The number of registers to read. - * - * Reads register value(s) from the ABB. - * @size has to be <= 4. - */ -int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) -{ - int r; - - if ((size < 1) || (4 < size)) - return -EINVAL; - - mutex_lock(&mb5_transfer.lock); - - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) - cpu_relax(); - writeb(slave, PRCM_REQ_MB5_I2C_SLAVE); - writeb(reg, PRCM_REQ_MB5_I2C_REG); - writeb(size, PRCM_REQ_MB5_I2C_SIZE); - writeb(MB5H_I2C_READ, PRCM_REQ_MB5_HEADER); - - writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); - wait_for_completion(&mb5_transfer.work); - - r = 0; - if ((mb5_transfer.ack.header == MB5H_I2C_READ) && - (mb5_transfer.ack.status == RC_SUCCESS)) - memcpy(value, mb5_transfer.ack.value, (size_t)size); - else - r = -EIO; - - mutex_unlock(&mb5_transfer.lock); - - return r; -} - -/** - * db5500_prcmu_abb_write() - Write register value(s) to the ABB. - * @slave: The I2C slave address. - * @reg: The (start) register address. - * @value: The value(s) to write. - * @size: The number of registers to write. - * - * Writes register value(s) to the ABB. - * @size has to be <= 4. - */ -int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) -{ - int r; - - if ((size < 1) || (4 < size)) - return -EINVAL; - - mutex_lock(&mb5_transfer.lock); - - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) - cpu_relax(); - writeb(slave, PRCM_REQ_MB5_I2C_SLAVE); - writeb(reg, PRCM_REQ_MB5_I2C_REG); - writeb(size, PRCM_REQ_MB5_I2C_SIZE); - memcpy_toio(PRCM_REQ_MB5_I2C_DATA, value, size); - writeb(MB5H_I2C_WRITE, PRCM_REQ_MB5_HEADER); - - writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); - wait_for_completion(&mb5_transfer.work); - - if ((mb5_transfer.ack.header == MB5H_I2C_WRITE) && - (mb5_transfer.ack.status == RC_SUCCESS)) - r = 0; - else - r = -EIO; - - mutex_unlock(&mb5_transfer.lock); - - return r; -} - -int db5500_prcmu_enable_dsipll(void) -{ - int i; - - /* Enable DSIPLL_RESETN resets */ - writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR); - /* Unclamp DSIPLL in/out */ - writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR); - /* Set DSI PLL FREQ */ - writel(PRCMU_PLLDSI_FREQ_SETTING, PRCM_PLLDSI_FREQ); - writel(PRCMU_DSI_PLLOUT_SEL_SETTING, - PRCM_DSI_PLLOUT_SEL); - /* Enable Escape clocks */ - writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV); - - /* Start DSI PLL */ - writel(PRCMU_ENABLE_PLLDSI, PRCM_PLLDSI_ENABLE); - /* Reset DSI PLL */ - writel(PRCMU_DSI_RESET_SW, PRCM_DSI_SW_RESET); - for (i = 0; i < 10; i++) { - if ((readl(PRCM_PLLDSI_LOCKP) & - PRCMU_PLLDSI_LOCKP_LOCKED) == PRCMU_PLLDSI_LOCKP_LOCKED) - break; - udelay(100); - } - /* Release DSIPLL_RESETN */ - writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_SET); - return 0; -} - -int db5500_prcmu_disable_dsipll(void) -{ - /* Disable dsi pll */ - writel(PRCMU_DISABLE_PLLDSI, PRCM_PLLDSI_ENABLE); - /* Disable escapeclock */ - writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV); - return 0; -} - -int db5500_prcmu_set_display_clocks(void) -{ - /* HDMI and TVCLK Should be handled somewhere else */ - /* PLLDIV=8, PLLSW=2, CLKEN=1 */ - writel(PRCMU_DSI_CLOCK_SETTING, PRCM_HDMICLK_MGT); - /* PLLDIV=14, PLLSW=2, CLKEN=1 */ - writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT); - return 0; -} - -static void ack_dbb_wakeup(void) -{ - unsigned long flags; - - spin_lock_irqsave(&mb0_transfer.lock, flags); - - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0)) - cpu_relax(); - - writeb(RMB0H_RD_WAKE_UP_ACK, PRCM_REQ_MB0_HEADER); - writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET); - - spin_unlock_irqrestore(&mb0_transfer.lock, flags); -} - -static inline void print_unknown_header_warning(u8 n, u8 header) -{ - pr_warning("prcmu: Unknown message header (%d) in mailbox %d.\n", - header, n); -} - -static bool read_mailbox_0(void) -{ - bool r; - u8 header; - - header = readb(PRCM_ACK_MB0_HEADER); - switch (header) { - case AMB0H_WAKE_UP: - r = true; - break; - default: - print_unknown_header_warning(0, header); - r = false; - break; - } - writel(MBOX_BIT(0), PRCM_ARM_IT1_CLR); - return r; -} - -static bool read_mailbox_1(void) -{ - writel(MBOX_BIT(1), PRCM_ARM_IT1_CLR); - return false; -} - -static bool read_mailbox_2(void) -{ - writel(MBOX_BIT(2), PRCM_ARM_IT1_CLR); - return false; -} - -static bool read_mailbox_3(void) -{ - writel(MBOX_BIT(3), PRCM_ARM_IT1_CLR); - return false; -} - -static bool read_mailbox_4(void) -{ - writel(MBOX_BIT(4), PRCM_ARM_IT1_CLR); - return false; -} - -static bool read_mailbox_5(void) -{ - u8 header; - - header = readb(PRCM_ACK_MB5_HEADER); - switch (header) { - case MB5H_I2C_READ: - memcpy_fromio(mb5_transfer.ack.value, PRCM_ACK_MB5_I2C_DATA, 4); - case MB5H_I2C_WRITE: - mb5_transfer.ack.header = header; - mb5_transfer.ack.status = readb(PRCM_ACK_MB5_RETURN_CODE); - complete(&mb5_transfer.work); - break; - default: - print_unknown_header_warning(5, header); - break; - } - writel(MBOX_BIT(5), PRCM_ARM_IT1_CLR); - return false; -} - -static bool read_mailbox_6(void) -{ - writel(MBOX_BIT(6), PRCM_ARM_IT1_CLR); - return false; -} - -static bool read_mailbox_7(void) -{ - writel(MBOX_BIT(7), PRCM_ARM_IT1_CLR); - return false; -} - -static bool (* const read_mailbox[NUM_MB])(void) = { - read_mailbox_0, - read_mailbox_1, - read_mailbox_2, - read_mailbox_3, - read_mailbox_4, - read_mailbox_5, - read_mailbox_6, - read_mailbox_7 -}; - -static irqreturn_t prcmu_irq_handler(int irq, void *data) -{ - u32 bits; - u8 n; - irqreturn_t r; - - bits = (readl(PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS); - if (unlikely(!bits)) - return IRQ_NONE; - - r = IRQ_HANDLED; - for (n = 0; bits; n++) { - if (bits & MBOX_BIT(n)) { - bits -= MBOX_BIT(n); - if (read_mailbox[n]()) - r = IRQ_WAKE_THREAD; - } - } - return r; -} - -static irqreturn_t prcmu_irq_thread_fn(int irq, void *data) -{ - ack_dbb_wakeup(); - return IRQ_HANDLED; -} - -void __init db5500_prcmu_early_init(void) -{ - tcdm_base = __io_address(U5500_PRCMU_TCDM_BASE); - spin_lock_init(&mb0_transfer.lock); - mutex_init(&mb5_transfer.lock); - init_completion(&mb5_transfer.work); -} - -/** - * prcmu_fw_init - arch init call for the Linux PRCMU fw init logic - * - */ -int __init db5500_prcmu_init(void) -{ - int r = 0; - - if (ux500_is_svp() || !cpu_is_u5500()) - return -ENODEV; - - /* Clean up the mailbox interrupts after pre-kernel code. */ - writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR); - - r = request_threaded_irq(IRQ_DB5500_PRCMU1, prcmu_irq_handler, - prcmu_irq_thread_fn, 0, "prcmu", NULL); - if (r < 0) { - pr_err("prcmu: Failed to allocate IRQ_DB5500_PRCMU1.\n"); - return -EBUSY; - } - return 0; -} - -arch_initcall(db5500_prcmu_init); diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index c8aae6640e64..7e96bb229724 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -25,6 +25,7 @@ #include <linux/clk.h> #include <linux/dma-mapping.h> #include <linux/spinlock.h> +#include <plat/cpu.h> #include <plat/usb.h> #include <linux/pm_runtime.h> diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 062ac333fde6..ceeab8e852ef 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -879,8 +879,13 @@ static inline unsigned int tg3_has_work(struct tg3_napi *tnapi) if (sblk->status & SD_STATUS_LINK_CHG) work_exists = 1; } - /* check for RX/TX work to do */ - if (sblk->idx[0].tx_consumer != tnapi->tx_cons || + + /* check for TX work to do */ + if (sblk->idx[0].tx_consumer != tnapi->tx_cons) + work_exists = 1; + + /* check for RX work to do */ + if (tnapi->rx_rcb_prod_idx && *(tnapi->rx_rcb_prod_idx) != tnapi->rx_rcb_ptr) work_exists = 1; @@ -6124,6 +6129,9 @@ static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget) return work_done; } + if (!tnapi->rx_rcb_prod_idx) + return work_done; + /* run RX thread, within the bounds set by NAPI. * All RX "locking" is done by ensuring outside * code synchronizes with tg3->napi.poll() @@ -7567,6 +7575,12 @@ static int tg3_alloc_consistent(struct tg3 *tp) */ switch (i) { default: + if (tg3_flag(tp, ENABLE_RSS)) { + tnapi->rx_rcb_prod_idx = NULL; + break; + } + /* Fall through */ + case 1: tnapi->rx_rcb_prod_idx = &sblk->idx[0].rx_producer; break; case 2: diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c index 63bfdd10bd6d..abb6ce7c1b7e 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c +++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c @@ -1150,6 +1150,48 @@ release_tpsram: } /** + * t3_synchronize_rx - wait for current Rx processing on a port to complete + * @adap: the adapter + * @p: the port + * + * Ensures that current Rx processing on any of the queues associated with + * the given port completes before returning. We do this by acquiring and + * releasing the locks of the response queues associated with the port. + */ +static void t3_synchronize_rx(struct adapter *adap, const struct port_info *p) +{ + int i; + + for (i = p->first_qset; i < p->first_qset + p->nqsets; i++) { + struct sge_rspq *q = &adap->sge.qs[i].rspq; + + spin_lock_irq(&q->lock); + spin_unlock_irq(&q->lock); + } +} + +static void cxgb_vlan_mode(struct net_device *dev, netdev_features_t features) +{ + struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + + if (adapter->params.rev > 0) { + t3_set_vlan_accel(adapter, 1 << pi->port_id, + features & NETIF_F_HW_VLAN_RX); + } else { + /* single control for all ports */ + unsigned int i, have_vlans = features & NETIF_F_HW_VLAN_RX; + + for_each_port(adapter, i) + have_vlans |= + adapter->port[i]->features & NETIF_F_HW_VLAN_RX; + + t3_set_vlan_accel(adapter, 1, have_vlans); + } + t3_synchronize_rx(adapter, pi); +} + +/** * cxgb_up - enable the adapter * @adapter: adapter being enabled * @@ -1161,7 +1203,7 @@ release_tpsram: */ static int cxgb_up(struct adapter *adap) { - int err; + int i, err; if (!(adap->flags & FULL_INIT_DONE)) { err = t3_check_fw_version(adap); @@ -1198,6 +1240,9 @@ static int cxgb_up(struct adapter *adap) if (err) goto out; + for_each_port(adap, i) + cxgb_vlan_mode(adap->port[i], adap->port[i]->features); + setup_rss(adap); if (!(adap->flags & NAPI_INIT)) init_napi(adap); @@ -2508,48 +2553,6 @@ static int cxgb_set_mac_addr(struct net_device *dev, void *p) return 0; } -/** - * t3_synchronize_rx - wait for current Rx processing on a port to complete - * @adap: the adapter - * @p: the port - * - * Ensures that current Rx processing on any of the queues associated with - * the given port completes before returning. We do this by acquiring and - * releasing the locks of the response queues associated with the port. - */ -static void t3_synchronize_rx(struct adapter *adap, const struct port_info *p) -{ - int i; - - for (i = p->first_qset; i < p->first_qset + p->nqsets; i++) { - struct sge_rspq *q = &adap->sge.qs[i].rspq; - - spin_lock_irq(&q->lock); - spin_unlock_irq(&q->lock); - } -} - -static void cxgb_vlan_mode(struct net_device *dev, netdev_features_t features) -{ - struct port_info *pi = netdev_priv(dev); - struct adapter *adapter = pi->adapter; - - if (adapter->params.rev > 0) { - t3_set_vlan_accel(adapter, 1 << pi->port_id, - features & NETIF_F_HW_VLAN_RX); - } else { - /* single control for all ports */ - unsigned int i, have_vlans = features & NETIF_F_HW_VLAN_RX; - - for_each_port(adapter, i) - have_vlans |= - adapter->port[i]->features & NETIF_F_HW_VLAN_RX; - - t3_set_vlan_accel(adapter, 1, have_vlans); - } - t3_synchronize_rx(adapter, pi); -} - static netdev_features_t cxgb_fix_features(struct net_device *dev, netdev_features_t features) { @@ -3353,9 +3356,6 @@ static int __devinit init_one(struct pci_dev *pdev, err = sysfs_create_group(&adapter->port[0]->dev.kobj, &cxgb3_attr_group); - for_each_port(adapter, i) - cxgb_vlan_mode(adapter->port[i], adapter->port[i]->features); - print_port_info(adapter, ai); return 0; diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c index b2dc2c81a147..2e09edb9cdf8 100644 --- a/drivers/net/ethernet/dlink/dl2k.c +++ b/drivers/net/ethernet/dlink/dl2k.c @@ -1259,55 +1259,21 @@ rio_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) { int phy_addr; struct netdev_private *np = netdev_priv(dev); - struct mii_data *miidata = (struct mii_data *) &rq->ifr_ifru; - - struct netdev_desc *desc; - int i; + struct mii_ioctl_data *miidata = if_mii(rq); phy_addr = np->phy_addr; switch (cmd) { - case SIOCDEVPRIVATE: - break; - - case SIOCDEVPRIVATE + 1: - miidata->out_value = mii_read (dev, phy_addr, miidata->reg_num); + case SIOCGMIIPHY: + miidata->phy_id = phy_addr; break; - case SIOCDEVPRIVATE + 2: - mii_write (dev, phy_addr, miidata->reg_num, miidata->in_value); + case SIOCGMIIREG: + miidata->val_out = mii_read (dev, phy_addr, miidata->reg_num); break; - case SIOCDEVPRIVATE + 3: - break; - case SIOCDEVPRIVATE + 4: - break; - case SIOCDEVPRIVATE + 5: - netif_stop_queue (dev); + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + mii_write (dev, phy_addr, miidata->reg_num, miidata->val_in); break; - case SIOCDEVPRIVATE + 6: - netif_wake_queue (dev); - break; - case SIOCDEVPRIVATE + 7: - printk - ("tx_full=%x cur_tx=%lx old_tx=%lx cur_rx=%lx old_rx=%lx\n", - netif_queue_stopped(dev), np->cur_tx, np->old_tx, np->cur_rx, - np->old_rx); - break; - case SIOCDEVPRIVATE + 8: - printk("TX ring:\n"); - for (i = 0; i < TX_RING_SIZE; i++) { - desc = &np->tx_ring[i]; - printk - ("%02x:cur:%08x next:%08x status:%08x frag1:%08x frag0:%08x", - i, - (u32) (np->tx_ring_dma + i * sizeof (*desc)), - (u32)le64_to_cpu(desc->next_desc), - (u32)le64_to_cpu(desc->status), - (u32)(le64_to_cpu(desc->fraginfo) >> 32), - (u32)le64_to_cpu(desc->fraginfo)); - printk ("\n"); - } - printk ("\n"); - break; - default: return -EOPNOTSUPP; } diff --git a/drivers/net/ethernet/dlink/dl2k.h b/drivers/net/ethernet/dlink/dl2k.h index ba0adcafa55a..30c2da3de548 100644 --- a/drivers/net/ethernet/dlink/dl2k.h +++ b/drivers/net/ethernet/dlink/dl2k.h @@ -365,13 +365,6 @@ struct ioctl_data { char *data; }; -struct mii_data { - __u16 reserved; - __u16 reg_num; - __u16 in_value; - __u16 out_value; -}; - /* The Rx and Tx buffer descriptors. */ struct netdev_desc { __le64 next_desc; diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c index 17a46e76123f..9ac14f804851 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.c +++ b/drivers/net/ethernet/freescale/ucc_geth.c @@ -116,10 +116,10 @@ static struct ucc_geth_info ugeth_primary_info = { .maxGroupAddrInHash = 4, .maxIndAddrInHash = 4, .prel = 7, - .maxFrameLength = 1518, + .maxFrameLength = 1518+16, /* Add extra bytes for VLANs etc. */ .minFrameLength = 64, - .maxD1Length = 1520, - .maxD2Length = 1520, + .maxD1Length = 1520+16, /* Add extra bytes for VLANs etc. */ + .maxD2Length = 1520+16, /* Add extra bytes for VLANs etc. */ .vlantype = 0x8100, .ecamptr = ((uint32_t) NULL), .eventRegMask = UCCE_OTHER, diff --git a/drivers/net/ethernet/freescale/ucc_geth.h b/drivers/net/ethernet/freescale/ucc_geth.h index 2e395a2566b8..f71b3e7b12de 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.h +++ b/drivers/net/ethernet/freescale/ucc_geth.h @@ -877,7 +877,7 @@ struct ucc_geth_hardware_statistics { /* Driver definitions */ #define TX_BD_RING_LEN 0x10 -#define RX_BD_RING_LEN 0x10 +#define RX_BD_RING_LEN 0x20 #define TX_RING_MOD_MASK(size) (size-1) #define RX_RING_MOD_MASK(size) (size-1) diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index 3516e17a399d..c9069a28832b 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -290,16 +290,18 @@ static void ehea_update_bcmc_registrations(void) arr[i].adh = adapter->handle; arr[i].port_id = port->logical_port_id; - arr[i].reg_type = EHEA_BCMC_SCOPE_ALL | - EHEA_BCMC_MULTICAST | + arr[i].reg_type = EHEA_BCMC_MULTICAST | EHEA_BCMC_UNTAGGED; + if (mc_entry->macaddr == 0) + arr[i].reg_type |= EHEA_BCMC_SCOPE_ALL; arr[i++].macaddr = mc_entry->macaddr; arr[i].adh = adapter->handle; arr[i].port_id = port->logical_port_id; - arr[i].reg_type = EHEA_BCMC_SCOPE_ALL | - EHEA_BCMC_MULTICAST | + arr[i].reg_type = EHEA_BCMC_MULTICAST | EHEA_BCMC_VLANID_ALL; + if (mc_entry->macaddr == 0) + arr[i].reg_type |= EHEA_BCMC_SCOPE_ALL; arr[i++].macaddr = mc_entry->macaddr; num_registrations -= 2; } @@ -1838,8 +1840,9 @@ static u64 ehea_multicast_reg_helper(struct ehea_port *port, u64 mc_mac_addr, u64 hret; u8 reg_type; - reg_type = EHEA_BCMC_SCOPE_ALL | EHEA_BCMC_MULTICAST - | EHEA_BCMC_UNTAGGED; + reg_type = EHEA_BCMC_MULTICAST | EHEA_BCMC_UNTAGGED; + if (mc_mac_addr == 0) + reg_type |= EHEA_BCMC_SCOPE_ALL; hret = ehea_h_reg_dereg_bcmc(port->adapter->handle, port->logical_port_id, @@ -1847,8 +1850,9 @@ static u64 ehea_multicast_reg_helper(struct ehea_port *port, u64 mc_mac_addr, if (hret) goto out; - reg_type = EHEA_BCMC_SCOPE_ALL | EHEA_BCMC_MULTICAST - | EHEA_BCMC_VLANID_ALL; + reg_type = EHEA_BCMC_MULTICAST | EHEA_BCMC_VLANID_ALL; + if (mc_mac_addr == 0) + reg_type |= EHEA_BCMC_SCOPE_ALL; hret = ehea_h_reg_dereg_bcmc(port->adapter->handle, port->logical_port_id, @@ -1898,7 +1902,7 @@ static void ehea_allmulti(struct net_device *dev, int enable) netdev_err(dev, "failed enabling IFF_ALLMULTI\n"); } - } else + } else { if (!enable) { /* Disable ALLMULTI */ hret = ehea_multicast_reg_helper(port, 0, H_DEREG_BCMC); @@ -1908,6 +1912,7 @@ static void ehea_allmulti(struct net_device *dev, int enable) netdev_err(dev, "failed disabling IFF_ALLMULTI\n"); } + } } static void ehea_add_multicast_entry(struct ehea_port *port, u8 *mc_mac_addr) @@ -1941,11 +1946,7 @@ static void ehea_set_multicast_list(struct net_device *dev) struct netdev_hw_addr *ha; int ret; - if (port->promisc) { - ehea_promiscuous(dev, 1); - return; - } - ehea_promiscuous(dev, 0); + ehea_promiscuous(dev, !!(dev->flags & IFF_PROMISC)); if (dev->flags & IFF_ALLMULTI) { ehea_allmulti(dev, 1); @@ -2463,6 +2464,7 @@ static int ehea_down(struct net_device *dev) return 0; ehea_drop_multicast_list(dev); + ehea_allmulti(dev, 0); ehea_broadcast_reg_helper(port, H_DEREG_BCMC); ehea_free_interrupts(dev); @@ -3261,6 +3263,7 @@ static int __devinit ehea_probe_adapter(struct platform_device *dev, struct ehea_adapter *adapter; const u64 *adapter_handle; int ret; + int i; if (!dev || !dev->dev.of_node) { pr_err("Invalid ibmebus device probed\n"); @@ -3314,17 +3317,9 @@ static int __devinit ehea_probe_adapter(struct platform_device *dev, tasklet_init(&adapter->neq_tasklet, ehea_neq_tasklet, (unsigned long)adapter); - ret = ibmebus_request_irq(adapter->neq->attr.ist1, - ehea_interrupt_neq, IRQF_DISABLED, - "ehea_neq", adapter); - if (ret) { - dev_err(&dev->dev, "requesting NEQ IRQ failed\n"); - goto out_kill_eq; - } - ret = ehea_create_device_sysfs(dev); if (ret) - goto out_free_irq; + goto out_kill_eq; ret = ehea_setup_ports(adapter); if (ret) { @@ -3332,15 +3327,28 @@ static int __devinit ehea_probe_adapter(struct platform_device *dev, goto out_rem_dev_sysfs; } + ret = ibmebus_request_irq(adapter->neq->attr.ist1, + ehea_interrupt_neq, IRQF_DISABLED, + "ehea_neq", adapter); + if (ret) { + dev_err(&dev->dev, "requesting NEQ IRQ failed\n"); + goto out_shutdown_ports; + } + + ret = 0; goto out; +out_shutdown_ports: + for (i = 0; i < EHEA_MAX_PORTS; i++) + if (adapter->port[i]) { + ehea_shutdown_single_port(adapter->port[i]); + adapter->port[i] = NULL; + } + out_rem_dev_sysfs: ehea_remove_device_sysfs(dev); -out_free_irq: - ibmebus_free_irq(adapter->neq->attr.ist1, adapter); - out_kill_eq: ehea_destroy_eq(adapter->neq); diff --git a/drivers/net/ethernet/ibm/ehea/ehea_phyp.h b/drivers/net/ethernet/ibm/ehea/ehea_phyp.h index 52c456ec4d6c..8364815c32ff 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_phyp.h +++ b/drivers/net/ethernet/ibm/ehea/ehea_phyp.h @@ -450,7 +450,7 @@ u64 ehea_h_modify_ehea_port(const u64 adapter_handle, const u16 port_num, void *cb_addr); #define H_REGBCMC_PN EHEA_BMASK_IBM(48, 63) -#define H_REGBCMC_REGTYPE EHEA_BMASK_IBM(61, 63) +#define H_REGBCMC_REGTYPE EHEA_BMASK_IBM(60, 63) #define H_REGBCMC_MACADDR EHEA_BMASK_IBM(16, 63) #define H_REGBCMC_VLANID EHEA_BMASK_IBM(52, 63) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 19ab2154802c..9520a6ac1f30 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3799,7 +3799,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) /* fire an unusual interrupt on the test handler */ ew32(ICS, E1000_ICS_RXSEQ); e1e_flush(); - msleep(50); + msleep(100); e1000_irq_disable(adapter); diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c index ff796e42c3eb..16adeb9418a8 100644 --- a/drivers/net/ethernet/intel/e1000e/param.c +++ b/drivers/net/ethernet/intel/e1000e/param.c @@ -106,7 +106,7 @@ E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay"); /* * Interrupt Throttle Rate (interrupts/sec) * - * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative) + * Valid Range: 100-100000 or one of: 0=off, 1=dynamic, 3=dynamic conservative */ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); #define DEFAULT_ITR 3 @@ -344,53 +344,60 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) if (num_InterruptThrottleRate > bd) { adapter->itr = InterruptThrottleRate[bd]; - switch (adapter->itr) { - case 0: - e_info("%s turned off\n", opt.name); - break; - case 1: - e_info("%s set to dynamic mode\n", opt.name); - adapter->itr_setting = adapter->itr; - adapter->itr = 20000; - break; - case 3: - e_info("%s set to dynamic conservative mode\n", - opt.name); - adapter->itr_setting = adapter->itr; - adapter->itr = 20000; - break; - case 4: - e_info("%s set to simplified (2000-8000 ints) " - "mode\n", opt.name); - adapter->itr_setting = 4; - break; - default: - /* - * Save the setting, because the dynamic bits - * change itr. - */ - if (e1000_validate_option(&adapter->itr, &opt, - adapter) && - (adapter->itr == 3)) { - /* - * In case of invalid user value, - * default to conservative mode. - */ - adapter->itr_setting = adapter->itr; - adapter->itr = 20000; - } else { - /* - * Clear the lower two bits because - * they are used as control. - */ - adapter->itr_setting = - adapter->itr & ~3; - } - break; - } + + /* + * Make sure a message is printed for non-special + * values. And in case of an invalid option, display + * warning, use default and got through itr/itr_setting + * adjustment logic below + */ + if ((adapter->itr > 4) && + e1000_validate_option(&adapter->itr, &opt, adapter)) + adapter->itr = opt.def; } else { - adapter->itr_setting = opt.def; + /* + * If no option specified, use default value and go + * through the logic below to adjust itr/itr_setting + */ + adapter->itr = opt.def; + + /* + * Make sure a message is printed for non-special + * default values + */ + if (adapter->itr > 40) + e_info("%s set to default %d\n", opt.name, + adapter->itr); + } + + adapter->itr_setting = adapter->itr; + switch (adapter->itr) { + case 0: + e_info("%s turned off\n", opt.name); + break; + case 1: + e_info("%s set to dynamic mode\n", opt.name); + adapter->itr = 20000; + break; + case 3: + e_info("%s set to dynamic conservative mode\n", + opt.name); adapter->itr = 20000; + break; + case 4: + e_info("%s set to simplified (2000-8000 ints) mode\n", + opt.name); + break; + default: + /* + * Save the setting, because the dynamic bits + * change itr. + * + * Clear the lower two bits because + * they are used as control. + */ + adapter->itr_setting &= ~3; + break; } } { /* Interrupt Mode */ diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index d61ca2a732f0..8ec74b07f940 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -2731,14 +2731,14 @@ static int __devinit igbvf_probe(struct pci_dev *pdev, netdev->addr_len); } - if (!is_valid_ether_addr(netdev->perm_addr)) { + if (!is_valid_ether_addr(netdev->dev_addr)) { dev_err(&pdev->dev, "Invalid MAC Address: %pM\n", netdev->dev_addr); err = -EIO; goto err_hw_init; } - memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len); + memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); setup_timer(&adapter->watchdog_timer, &igbvf_watchdog, (unsigned long) adapter); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c index 77ea4b716535..bc07933d67da 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c @@ -437,6 +437,7 @@ int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter, */ if ((fh->fh_r_ctl == FC_RCTL_DD_SOL_DATA) && (fctl & FC_FC_END_SEQ)) { + skb_linearize(skb); crc = (struct fcoe_crc_eof *)skb_put(skb, sizeof(*crc)); crc->fcoe_eof = FC_EOF_T; } diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index a7f3cd872caf..88f6b2e9b72d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4873,10 +4873,6 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake) } ixgbe_clear_interrupt_scheme(adapter); -#ifdef CONFIG_DCB - kfree(adapter->ixgbe_ieee_pfc); - kfree(adapter->ixgbe_ieee_ets); -#endif #ifdef CONFIG_PM retval = pci_save_state(pdev); @@ -7224,6 +7220,11 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) ixgbe_release_hw_control(adapter); +#ifdef CONFIG_DCB + kfree(adapter->ixgbe_ieee_pfc); + kfree(adapter->ixgbe_ieee_ets); + +#endif iounmap(adapter->hw.hw_addr); pci_release_selected_regions(pdev, pci_select_bars(pdev, IORESOURCE_MEM)); diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index c9b504e2dfc3..487a6c8bd4ec 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -2494,8 +2494,13 @@ static struct sk_buff *receive_copy(struct sky2_port *sky2, skb_copy_from_linear_data(re->skb, skb->data, length); skb->ip_summed = re->skb->ip_summed; skb->csum = re->skb->csum; + skb->rxhash = re->skb->rxhash; + skb->vlan_tci = re->skb->vlan_tci; + pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr, length, PCI_DMA_FROMDEVICE); + re->skb->vlan_tci = 0; + re->skb->rxhash = 0; re->skb->ip_summed = CHECKSUM_NONE; skb_put(skb, length); } @@ -2580,9 +2585,6 @@ static struct sk_buff *sky2_receive(struct net_device *dev, struct sk_buff *skb = NULL; u16 count = (status & GMR_FS_LEN) >> 16; - if (status & GMR_FS_VLAN) - count -= VLAN_HLEN; /* Account for vlan tag */ - netif_printk(sky2, rx_status, KERN_DEBUG, dev, "rx slot %u status 0x%x len %d\n", sky2->rx_next, status, length); @@ -2590,6 +2592,9 @@ static struct sk_buff *sky2_receive(struct net_device *dev, sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending; prefetch(sky2->rx_ring + sky2->rx_next); + if (vlan_tx_tag_present(re->skb)) + count -= VLAN_HLEN; /* Account for vlan tag */ + /* This chip has hardware problems that generates bogus status. * So do only marginal checking and expect higher level protocols * to handle crap frames. @@ -2647,11 +2652,8 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last) } static inline void sky2_skb_rx(const struct sky2_port *sky2, - u32 status, struct sk_buff *skb) + struct sk_buff *skb) { - if (status & GMR_FS_VLAN) - __vlan_hwaccel_put_tag(skb, be16_to_cpu(sky2->rx_tag)); - if (skb->ip_summed == CHECKSUM_NONE) netif_receive_skb(skb); else @@ -2705,6 +2707,14 @@ static void sky2_rx_checksum(struct sky2_port *sky2, u32 status) } } +static void sky2_rx_tag(struct sky2_port *sky2, u16 length) +{ + struct sk_buff *skb; + + skb = sky2->rx_ring[sky2->rx_next].skb; + __vlan_hwaccel_put_tag(skb, be16_to_cpu(length)); +} + static void sky2_rx_hash(struct sky2_port *sky2, u32 status) { struct sk_buff *skb; @@ -2763,8 +2773,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) } skb->protocol = eth_type_trans(skb, dev); - - sky2_skb_rx(sky2, status, skb); + sky2_skb_rx(sky2, skb); /* Stop after net poll weight */ if (++work_done >= to_do) @@ -2772,11 +2781,11 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) break; case OP_RXVLAN: - sky2->rx_tag = length; + sky2_rx_tag(sky2, length); break; case OP_RXCHKSVLAN: - sky2->rx_tag = length; + sky2_rx_tag(sky2, length); /* fall through */ case OP_RXCHKS: if (likely(dev->features & NETIF_F_RXCSUM)) diff --git a/drivers/net/ethernet/marvell/sky2.h b/drivers/net/ethernet/marvell/sky2.h index ff6f58bf822a..3c896ce80b71 100644 --- a/drivers/net/ethernet/marvell/sky2.h +++ b/drivers/net/ethernet/marvell/sky2.h @@ -2241,7 +2241,6 @@ struct sky2_port { u16 rx_pending; u16 rx_data_size; u16 rx_nfrags; - u16 rx_tag; struct { unsigned long last; diff --git a/drivers/net/ethernet/sun/sungem.c b/drivers/net/ethernet/sun/sungem.c index 558409ff4058..4ba969096717 100644 --- a/drivers/net/ethernet/sun/sungem.c +++ b/drivers/net/ethernet/sun/sungem.c @@ -2339,7 +2339,7 @@ static int gem_suspend(struct pci_dev *pdev, pm_message_t state) netif_device_detach(dev); /* Switch off chip, remember WOL setting */ - gp->asleep_wol = gp->wake_on_lan; + gp->asleep_wol = !!gp->wake_on_lan; gem_do_stop(dev, gp->asleep_wol); /* Unlock the network stack */ diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 174a3348f676..08aff1a2087c 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1511,7 +1511,7 @@ static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd) static int match_first_device(struct device *dev, void *data) { - return 1; + return !strncmp(dev_name(dev), "davinci_mdio", 12); } /** diff --git a/drivers/net/ethernet/ti/tlan.c b/drivers/net/ethernet/ti/tlan.c index 817ad3bc4957..efd36691ce54 100644 --- a/drivers/net/ethernet/ti/tlan.c +++ b/drivers/net/ethernet/ti/tlan.c @@ -228,7 +228,7 @@ tlan_get_skb(const struct tlan_list *tag) unsigned long addr; addr = tag->buffer[9].address; - addr |= (tag->buffer[8].address << 16) << 16; + addr |= ((unsigned long) tag->buffer[8].address << 16) << 16; return (struct sk_buff *) addr; } diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index 5ee032cafade..42b5151aa78a 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -355,7 +355,7 @@ static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, u32 packet_len; u32 padbytes = 0xffff0000; - padlen = ((skb->len + 4) % 512) ? 0 : 4; + padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4; if ((!skb_cloned(skb)) && ((headroom + tailroom) >= (4 + padlen))) { @@ -377,7 +377,7 @@ static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, cpu_to_le32s(&packet_len); skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len)); - if ((skb->len % 512) == 0) { + if (padlen) { cpu_to_le32s(&padbytes); memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes)); skb_put(skb, sizeof(padbytes)); diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index a2349483cd2a..00103a8c5e04 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -98,7 +98,7 @@ static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index, if (unlikely(ret < 0)) netdev_warn(dev->net, - "Failed to read register index 0x%08x", index); + "Failed to read reg index 0x%08x: %d", index, ret); le32_to_cpus(buf); *data = *buf; @@ -128,7 +128,7 @@ static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index, if (unlikely(ret < 0)) netdev_warn(dev->net, - "Failed to write register index 0x%08x", index); + "Failed to write reg index 0x%08x: %d", index, ret); kfree(buf); @@ -171,7 +171,7 @@ static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx) idx &= dev->mii.reg_num_mask; addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR) | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR) - | MII_ACCESS_READ; + | MII_ACCESS_READ | MII_ACCESS_BUSY; ret = smsc75xx_write_reg(dev, MII_ACCESS, addr); check_warn_goto_done(ret, "Error writing MII_ACCESS"); @@ -210,7 +210,7 @@ static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx, idx &= dev->mii.reg_num_mask; addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR) | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR) - | MII_ACCESS_WRITE; + | MII_ACCESS_WRITE | MII_ACCESS_BUSY; ret = smsc75xx_write_reg(dev, MII_ACCESS, addr); check_warn_goto_done(ret, "Error writing MII_ACCESS"); @@ -508,9 +508,10 @@ static int smsc75xx_link_reset(struct usbnet *dev) u16 lcladv, rmtadv; int ret; - /* clear interrupt status */ + /* read and write to clear phy interrupt status */ ret = smsc75xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC); check_warn_return(ret, "Error reading PHY_INT_SRC"); + smsc75xx_mdio_write(dev->net, mii->phy_id, PHY_INT_SRC, 0xffff); ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL); check_warn_return(ret, "Error writing INT_STS"); @@ -643,7 +644,7 @@ static int smsc75xx_set_mac_address(struct usbnet *dev) static int smsc75xx_phy_initialize(struct usbnet *dev) { - int bmcr, timeout = 0; + int bmcr, ret, timeout = 0; /* Initialize MII structure */ dev->mii.dev = dev->net; @@ -651,6 +652,7 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) dev->mii.mdio_write = smsc75xx_mdio_write; dev->mii.phy_id_mask = 0x1f; dev->mii.reg_num_mask = 0x1f; + dev->mii.supports_gmii = 1; dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID; /* reset phy and wait for reset to complete */ @@ -661,7 +663,7 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR); check_warn_return(bmcr, "Error reading MII_BMCR"); timeout++; - } while ((bmcr & MII_BMCR) && (timeout < 100)); + } while ((bmcr & BMCR_RESET) && (timeout < 100)); if (timeout >= 100) { netdev_warn(dev->net, "timeout on PHY Reset"); @@ -671,10 +673,13 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM); + smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000, + ADVERTISE_1000FULL); - /* read to clear */ - smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC); - check_warn_return(bmcr, "Error reading PHY_INT_SRC"); + /* read and write to clear phy interrupt status */ + ret = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC); + check_warn_return(ret, "Error reading PHY_INT_SRC"); + smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_SRC, 0xffff); smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK, PHY_INT_MASK_DEFAULT); @@ -946,6 +951,14 @@ static int smsc75xx_reset(struct usbnet *dev) ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf); check_warn_return(ret, "Failed to write INT_EP_CTL: %d", ret); + /* allow mac to detect speed and duplex from phy */ + ret = smsc75xx_read_reg(dev, MAC_CR, &buf); + check_warn_return(ret, "Failed to read MAC_CR: %d", ret); + + buf |= (MAC_CR_ADD | MAC_CR_ASD); + ret = smsc75xx_write_reg(dev, MAC_CR, buf); + check_warn_return(ret, "Failed to write MAC_CR: %d", ret); + ret = smsc75xx_read_reg(dev, MAC_TX, &buf); check_warn_return(ret, "Failed to read MAC_TX: %d", ret); @@ -1212,7 +1225,7 @@ static const struct driver_info smsc75xx_info = { .rx_fixup = smsc75xx_rx_fixup, .tx_fixup = smsc75xx_tx_fixup, .status = smsc75xx_status, - .flags = FLAG_ETHER | FLAG_SEND_ZLP, + .flags = FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR, }; static const struct usb_device_id products[] = { diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 5f19f84d3494..94ae66999f59 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1017,6 +1017,7 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->ethtool_ops = &smsc95xx_ethtool_ops; dev->net->flags |= IFF_MULTICAST; dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD_CSUM; + dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; return 0; } @@ -1191,7 +1192,7 @@ static const struct driver_info smsc95xx_info = { .rx_fixup = smsc95xx_rx_fixup, .tx_fixup = smsc95xx_tx_fixup, .status = smsc95xx_status, - .flags = FLAG_ETHER | FLAG_SEND_ZLP, + .flags = FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR, }; static const struct usb_device_id products[] = { diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index b7b3f5b0d406..2d927fb4adf4 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -210,6 +210,7 @@ static int init_status (struct usbnet *dev, struct usb_interface *intf) } else { usb_fill_int_urb(dev->interrupt, dev->udev, pipe, buf, maxp, intr_complete, dev, period); + dev->interrupt->transfer_flags |= URB_FREE_BUFFER; dev_dbg(&intf->dev, "status ep%din, %d bytes period %d\n", usb_pipeendpoint(pipe), maxp, period); @@ -1443,7 +1444,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) status = register_netdev (net); if (status) - goto out3; + goto out4; netif_info(dev, probe, dev->net, "register '%s' at usb-%s-%s, %s, %pM\n", udev->dev.driver->name, @@ -1461,6 +1462,8 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) return 0; +out4: + usb_free_urb(dev->interrupt); out3: if (info->unbind) info->unbind (dev, udev); diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c index 8c50d9d19d78..aec33cc207fd 100644 --- a/drivers/net/wireless/ath/ath5k/ahb.c +++ b/drivers/net/wireless/ath/ath5k/ahb.c @@ -220,6 +220,7 @@ static int ath_ahb_remove(struct platform_device *pdev) } ath5k_deinit_ah(ah); + iounmap(ah->iobase); platform_set_drvdata(pdev, NULL); ieee80211_free_hw(hw); diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index d7d8e9199140..aba088005b22 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -869,7 +869,7 @@ static int ar5008_hw_process_ini(struct ath_hw *ah, ar5008_hw_set_channel_regs(ah, chan); ar5008_hw_init_chain_masks(ah); ath9k_olc_init(ah); - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, false); /* Write analog registers */ if (!ath9k_hw_set_rf_regs(ah, chan, freqIndex)) { diff --git a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c index 59647a3ceb7f..3d400e8d6535 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c @@ -54,7 +54,7 @@ void ar9003_paprd_enable(struct ath_hw *ah, bool val) if (val) { ah->paprd_table_write_done = true; - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, false); } REG_RMW_FIELD(ah, AR_PHY_PAPRD_CTRL0_B0, diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index bc992b237ae5..deb6cfb2959a 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -694,7 +694,7 @@ static int ar9003_hw_process_ini(struct ath_hw *ah, ar9003_hw_override_ini(ah); ar9003_hw_set_channel_regs(ah, chan); ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask); - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, false); if (AR_SREV_9462(ah)) { if (REG_READ_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_0, diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c index f272236d8053..b34e8b2990b1 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c @@ -824,6 +824,8 @@ static void ath9k_hw_ar9287_set_txpower(struct ath_hw *ah, regulatory->max_power_level = ratesArray[i]; } + ath9k_hw_update_regulatory_maxpower(ah); + if (test) return; diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 6c69e4e8b1cb..fa84e37bf091 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1454,7 +1454,7 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah, return false; } ath9k_hw_set_clockrate(ah); - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, false); ath9k_hw_rfbus_done(ah); if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan)) @@ -2652,7 +2652,8 @@ static int get_antenna_gain(struct ath_hw *ah, struct ath9k_channel *chan) return ah->eep_ops->get_eeprom(ah, gain_param); } -void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan) +void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan, + bool test) { struct ath_regulatory *reg = ath9k_hw_regulatory(ah); struct ieee80211_channel *channel; @@ -2673,7 +2674,7 @@ void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan) ah->eep_ops->set_txpower(ah, chan, ath9k_regd_get_ctl(reg, chan), - ant_reduction, new_pwr, false); + ant_reduction, new_pwr, test); } void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit, bool test) @@ -2686,7 +2687,7 @@ void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit, bool test) if (test) channel->max_power = MAX_RATE_POWER / 2; - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, test); if (test) channel->max_power = DIV_ROUND_UP(reg->max_power_level, 2); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index aa1680a0c7fd..e88f182ff45c 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -985,7 +985,8 @@ void ath9k_hw_name(struct ath_hw *ah, char *hw_name, size_t len); /* PHY */ void ath9k_hw_get_delta_slope_vals(struct ath_hw *ah, u32 coef_scaled, u32 *coef_mantissa, u32 *coef_exponent); -void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan); +void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan, + bool test); /* * Code Specific to AR5008, AR9001 or AR9002, diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index c79e6638c88d..e4d6dc2e37d1 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4827,8 +4827,14 @@ static int b43_op_start(struct ieee80211_hw *hw) out_mutex_unlock: mutex_unlock(&wl->mutex); - /* reload configuration */ - b43_op_config(hw, ~0); + /* + * Configuration may have been overwritten during initialization. + * Reload the configuration, but only if initialization was + * successful. Reloading the configuration after a failed init + * may hang the system. + */ + if (!err) + b43_op_config(hw, ~0); return err; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c index 4688904908ec..758c115b556e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c @@ -108,9 +108,15 @@ static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev, sdio_release_host(sdfunc); } } else if (regaddr == SDIO_CCCR_ABORT) { + sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func), + GFP_KERNEL); + if (!sdfunc) + return -ENOMEM; + sdfunc->num = 0; sdio_claim_host(sdfunc); sdio_writeb(sdfunc, *byte, regaddr, &err_ret); sdio_release_host(sdfunc); + kfree(sdfunc); } else if (regaddr < 0xF0) { brcmf_dbg(ERROR, "F0 Wr:0x%02x: write disallowed\n", regaddr); err_ret = -EPERM; @@ -486,7 +492,7 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func, kfree(bus_if); return -ENOMEM; } - sdiodev->func[0] = func->card->sdio_func[0]; + sdiodev->func[0] = func; sdiodev->func[1] = func; sdiodev->bus_if = bus_if; bus_if->bus_priv.sdio = sdiodev; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 2bf5dda29291..eb3829b03cd3 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -574,6 +574,8 @@ struct brcmf_sdio { struct task_struct *dpc_tsk; struct completion dpc_wait; + struct list_head dpc_tsklst; + spinlock_t dpc_tl_lock; struct semaphore sdsem; @@ -2594,29 +2596,58 @@ clkwait: return resched; } +static inline void brcmf_sdbrcm_adddpctsk(struct brcmf_sdio *bus) +{ + struct list_head *new_hd; + unsigned long flags; + + if (in_interrupt()) + new_hd = kzalloc(sizeof(struct list_head), GFP_ATOMIC); + else + new_hd = kzalloc(sizeof(struct list_head), GFP_KERNEL); + if (new_hd == NULL) + return; + + spin_lock_irqsave(&bus->dpc_tl_lock, flags); + list_add_tail(new_hd, &bus->dpc_tsklst); + spin_unlock_irqrestore(&bus->dpc_tl_lock, flags); +} + static int brcmf_sdbrcm_dpc_thread(void *data) { struct brcmf_sdio *bus = (struct brcmf_sdio *) data; + struct list_head *cur_hd, *tmp_hd; + unsigned long flags; allow_signal(SIGTERM); /* Run until signal received */ while (1) { if (kthread_should_stop()) break; - if (!wait_for_completion_interruptible(&bus->dpc_wait)) { - /* Call bus dpc unless it indicated down - (then clean stop) */ - if (bus->sdiodev->bus_if->state != BRCMF_BUS_DOWN) { - if (brcmf_sdbrcm_dpc(bus)) - complete(&bus->dpc_wait); - } else { + + if (list_empty(&bus->dpc_tsklst)) + if (wait_for_completion_interruptible(&bus->dpc_wait)) + break; + + spin_lock_irqsave(&bus->dpc_tl_lock, flags); + list_for_each_safe(cur_hd, tmp_hd, &bus->dpc_tsklst) { + spin_unlock_irqrestore(&bus->dpc_tl_lock, flags); + + if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) { /* after stopping the bus, exit thread */ brcmf_sdbrcm_bus_stop(bus->sdiodev->dev); bus->dpc_tsk = NULL; break; } - } else - break; + + if (brcmf_sdbrcm_dpc(bus)) + brcmf_sdbrcm_adddpctsk(bus); + + spin_lock_irqsave(&bus->dpc_tl_lock, flags); + list_del(cur_hd); + kfree(cur_hd); + } + spin_unlock_irqrestore(&bus->dpc_tl_lock, flags); } return 0; } @@ -2669,8 +2700,10 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt) /* Schedule DPC if needed to send queued packet(s) */ if (!bus->dpc_sched) { bus->dpc_sched = true; - if (bus->dpc_tsk) + if (bus->dpc_tsk) { + brcmf_sdbrcm_adddpctsk(bus); complete(&bus->dpc_wait); + } } return ret; @@ -3514,8 +3547,10 @@ void brcmf_sdbrcm_isr(void *arg) brcmf_dbg(ERROR, "isr w/o interrupt configured!\n"); bus->dpc_sched = true; - if (bus->dpc_tsk) + if (bus->dpc_tsk) { + brcmf_sdbrcm_adddpctsk(bus); complete(&bus->dpc_wait); + } } static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) @@ -3559,8 +3594,10 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) bus->ipend = true; bus->dpc_sched = true; - if (bus->dpc_tsk) + if (bus->dpc_tsk) { + brcmf_sdbrcm_adddpctsk(bus); complete(&bus->dpc_wait); + } } } @@ -3897,6 +3934,8 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) } /* Initialize DPC thread */ init_completion(&bus->dpc_wait); + INIT_LIST_HEAD(&bus->dpc_tsklst); + spin_lock_init(&bus->dpc_tl_lock); bus->dpc_tsk = kthread_run(brcmf_sdbrcm_dpc_thread, bus, "brcmf_dpc"); if (IS_ERR(bus->dpc_tsk)) { diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 7083db75b00c..b4d92792c502 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -847,8 +847,7 @@ brcms_c_dotxstatus(struct brcms_c_info *wlc, struct tx_status *txs) */ if (!(txs->status & TX_STATUS_AMPDU) && (txs->status & TX_STATUS_INTERMEDIATE)) { - wiphy_err(wlc->wiphy, "%s: INTERMEDIATE but not AMPDU\n", - __func__); + BCMMSG(wlc->wiphy, "INTERMEDIATE but not AMPDU\n"); return false; } diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 2b022571a859..1779db3aa2b0 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -2191,6 +2191,7 @@ static int __ipw_send_cmd(struct ipw_priv *priv, struct host_cmd *cmd) { int rc = 0; unsigned long flags; + unsigned long now, end; spin_lock_irqsave(&priv->lock, flags); if (priv->status & STATUS_HCMD_ACTIVE) { @@ -2232,10 +2233,20 @@ static int __ipw_send_cmd(struct ipw_priv *priv, struct host_cmd *cmd) } spin_unlock_irqrestore(&priv->lock, flags); + now = jiffies; + end = now + HOST_COMPLETE_TIMEOUT; +again: rc = wait_event_interruptible_timeout(priv->wait_command_queue, !(priv-> status & STATUS_HCMD_ACTIVE), - HOST_COMPLETE_TIMEOUT); + end - now); + if (rc < 0) { + now = jiffies; + if (time_before(now, end)) + goto again; + rc = 0; + } + if (rc == 0) { spin_lock_irqsave(&priv->lock, flags); if (priv->status & STATUS_HCMD_ACTIVE) { diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index 5b0d888f746b..8d80e233bc7a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -46,8 +46,8 @@ #include "iwl-prph.h" /* Highest firmware API version supported */ -#define IWL1000_UCODE_API_MAX 6 -#define IWL100_UCODE_API_MAX 6 +#define IWL1000_UCODE_API_MAX 5 +#define IWL100_UCODE_API_MAX 5 /* Oldest version we won't warn about */ #define IWL1000_UCODE_API_OK 5 @@ -226,5 +226,5 @@ const struct iwl_cfg iwl100_bg_cfg = { IWL_DEVICE_100, }; -MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL100_MODULE_FIRMWARE(IWL100_UCODE_API_MAX)); +MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_OK)); +MODULE_FIRMWARE(IWL100_MODULE_FIRMWARE(IWL100_UCODE_API_OK)); diff --git a/drivers/net/wireless/iwlwifi/iwl-2000.c b/drivers/net/wireless/iwlwifi/iwl-2000.c index 5635b9e2c69e..ea108622e0bd 100644 --- a/drivers/net/wireless/iwlwifi/iwl-2000.c +++ b/drivers/net/wireless/iwlwifi/iwl-2000.c @@ -51,10 +51,10 @@ #define IWL135_UCODE_API_MAX 6 /* Oldest version we won't warn about */ -#define IWL2030_UCODE_API_OK 5 -#define IWL2000_UCODE_API_OK 5 -#define IWL105_UCODE_API_OK 5 -#define IWL135_UCODE_API_OK 5 +#define IWL2030_UCODE_API_OK 6 +#define IWL2000_UCODE_API_OK 6 +#define IWL105_UCODE_API_OK 6 +#define IWL135_UCODE_API_OK 6 /* Lowest firmware API version supported */ #define IWL2030_UCODE_API_MIN 5 @@ -328,7 +328,7 @@ const struct iwl_cfg iwl135_bgn_cfg = { .ht_params = &iwl2000_ht_params, }; -MODULE_FIRMWARE(IWL2000_MODULE_FIRMWARE(IWL2000_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL2030_MODULE_FIRMWARE(IWL2030_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL105_MODULE_FIRMWARE(IWL105_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL135_MODULE_FIRMWARE(IWL135_UCODE_API_MAX)); +MODULE_FIRMWARE(IWL2000_MODULE_FIRMWARE(IWL2000_UCODE_API_OK)); +MODULE_FIRMWARE(IWL2030_MODULE_FIRMWARE(IWL2030_UCODE_API_OK)); +MODULE_FIRMWARE(IWL105_MODULE_FIRMWARE(IWL105_UCODE_API_OK)); +MODULE_FIRMWARE(IWL135_MODULE_FIRMWARE(IWL135_UCODE_API_OK)); diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index a805e97b89af..de0920c74cdd 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -51,6 +51,10 @@ #define IWL5000_UCODE_API_MAX 5 #define IWL5150_UCODE_API_MAX 2 +/* Oldest version we won't warn about */ +#define IWL5000_UCODE_API_OK 5 +#define IWL5150_UCODE_API_OK 2 + /* Lowest firmware API version supported */ #define IWL5000_UCODE_API_MIN 1 #define IWL5150_UCODE_API_MIN 1 @@ -326,6 +330,7 @@ static const struct iwl_ht_params iwl5000_ht_params = { #define IWL_DEVICE_5000 \ .fw_name_pre = IWL5000_FW_PRE, \ .ucode_api_max = IWL5000_UCODE_API_MAX, \ + .ucode_api_ok = IWL5000_UCODE_API_OK, \ .ucode_api_min = IWL5000_UCODE_API_MIN, \ .max_inst_size = IWLAGN_RTC_INST_SIZE, \ .max_data_size = IWLAGN_RTC_DATA_SIZE, \ @@ -371,6 +376,7 @@ const struct iwl_cfg iwl5350_agn_cfg = { .name = "Intel(R) WiMAX/WiFi Link 5350 AGN", .fw_name_pre = IWL5000_FW_PRE, .ucode_api_max = IWL5000_UCODE_API_MAX, + .ucode_api_ok = IWL5000_UCODE_API_OK, .ucode_api_min = IWL5000_UCODE_API_MIN, .max_inst_size = IWLAGN_RTC_INST_SIZE, .max_data_size = IWLAGN_RTC_DATA_SIZE, @@ -386,6 +392,7 @@ const struct iwl_cfg iwl5350_agn_cfg = { #define IWL_DEVICE_5150 \ .fw_name_pre = IWL5150_FW_PRE, \ .ucode_api_max = IWL5150_UCODE_API_MAX, \ + .ucode_api_ok = IWL5150_UCODE_API_OK, \ .ucode_api_min = IWL5150_UCODE_API_MIN, \ .max_inst_size = IWLAGN_RTC_INST_SIZE, \ .max_data_size = IWLAGN_RTC_DATA_SIZE, \ @@ -409,5 +416,5 @@ const struct iwl_cfg iwl5150_abg_cfg = { IWL_DEVICE_5150, }; -MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL5150_MODULE_FIRMWARE(IWL5150_UCODE_API_MAX)); +MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_OK)); +MODULE_FIRMWARE(IWL5150_MODULE_FIRMWARE(IWL5150_UCODE_API_OK)); diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 64060cd738b5..f0c91505a7f7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -53,6 +53,8 @@ /* Oldest version we won't warn about */ #define IWL6000_UCODE_API_OK 4 #define IWL6000G2_UCODE_API_OK 5 +#define IWL6050_UCODE_API_OK 5 +#define IWL6000G2B_UCODE_API_OK 6 /* Lowest firmware API version supported */ #define IWL6000_UCODE_API_MIN 4 @@ -388,7 +390,7 @@ const struct iwl_cfg iwl6005_2agn_mow2_cfg = { #define IWL_DEVICE_6030 \ .fw_name_pre = IWL6030_FW_PRE, \ .ucode_api_max = IWL6000G2_UCODE_API_MAX, \ - .ucode_api_ok = IWL6000G2_UCODE_API_OK, \ + .ucode_api_ok = IWL6000G2B_UCODE_API_OK, \ .ucode_api_min = IWL6000G2_UCODE_API_MIN, \ .max_inst_size = IWL60_RTC_INST_SIZE, \ .max_data_size = IWL60_RTC_DATA_SIZE, \ @@ -557,6 +559,6 @@ const struct iwl_cfg iwl6000_3agn_cfg = { }; MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_OK)); -MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL6005_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL6030_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX)); +MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_OK)); +MODULE_FIRMWARE(IWL6005_MODULE_FIRMWARE(IWL6000G2_UCODE_API_OK)); +MODULE_FIRMWARE(IWL6030_MODULE_FIRMWARE(IWL6000G2B_UCODE_API_OK)); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index f1226dbf789d..2a9a16f901c3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -863,7 +863,6 @@ static void iwl_bg_run_time_calib_work(struct work_struct *work) void iwlagn_prepare_restart(struct iwl_priv *priv) { - struct iwl_rxon_context *ctx; bool bt_full_concurrent; u8 bt_ci_compliance; u8 bt_load; @@ -872,8 +871,6 @@ void iwlagn_prepare_restart(struct iwl_priv *priv) lockdep_assert_held(&priv->mutex); - for_each_context(priv, ctx) - ctx->vif = NULL; priv->is_open = 0; /* diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h index 90208094b8eb..74bce97a8600 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -104,15 +104,29 @@ * (see struct iwl_tfd_frame). These 16 pointer registers are offset by 0x04 * bytes from one another. Each TFD circular buffer in DRAM must be 256-byte * aligned (address bits 0-7 must be 0). + * Later devices have 20 (5000 series) or 30 (higher) queues, but the registers + * for them are in different places. * * Bit fields in each pointer register: * 27-0: TFD CB physical base address [35:8], must be 256-byte aligned */ -#define FH_MEM_CBBC_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) -#define FH_MEM_CBBC_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xA10) - -/* Find TFD CB base pointer for given queue (range 0-15). */ -#define FH_MEM_CBBC_QUEUE(x) (FH_MEM_CBBC_LOWER_BOUND + (x) * 0x4) +#define FH_MEM_CBBC_0_15_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) +#define FH_MEM_CBBC_0_15_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xA10) +#define FH_MEM_CBBC_16_19_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xBF0) +#define FH_MEM_CBBC_16_19_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) +#define FH_MEM_CBBC_20_31_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xB20) +#define FH_MEM_CBBC_20_31_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xB80) + +/* Find TFD CB base pointer for given queue */ +static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl) +{ + if (chnl < 16) + return FH_MEM_CBBC_0_15_LOWER_BOUND + 4 * chnl; + if (chnl < 20) + return FH_MEM_CBBC_16_19_LOWER_BOUND + 4 * (chnl - 16); + WARN_ON_ONCE(chnl >= 32); + return FH_MEM_CBBC_20_31_LOWER_BOUND + 4 * (chnl - 20); +} /** diff --git a/drivers/net/wireless/iwlwifi/iwl-mac80211.c b/drivers/net/wireless/iwlwifi/iwl-mac80211.c index b6805f8e9a01..c24a7134a6f9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-mac80211.c +++ b/drivers/net/wireless/iwlwifi/iwl-mac80211.c @@ -1244,6 +1244,7 @@ static int iwlagn_mac_add_interface(struct ieee80211_hw *hw, struct iwl_rxon_context *tmp, *ctx = NULL; int err; enum nl80211_iftype viftype = ieee80211_vif_type_p2p(vif); + bool reset = false; IWL_DEBUG_MAC80211(priv, "enter: type %d, addr %pM\n", viftype, vif->addr); @@ -1265,6 +1266,13 @@ static int iwlagn_mac_add_interface(struct ieee80211_hw *hw, tmp->interface_modes | tmp->exclusive_interface_modes; if (tmp->vif) { + /* On reset we need to add the same interface again */ + if (tmp->vif == vif) { + reset = true; + ctx = tmp; + break; + } + /* check if this busy context is exclusive */ if (tmp->exclusive_interface_modes & BIT(tmp->vif->type)) { @@ -1291,7 +1299,7 @@ static int iwlagn_mac_add_interface(struct ieee80211_hw *hw, ctx->vif = vif; err = iwl_setup_interface(priv, ctx); - if (!err) + if (!err || reset) goto out; ctx->vif = NULL; diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index 75dc20bd965b..3b1069290fa9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -223,12 +223,33 @@ #define SCD_AIT (SCD_BASE + 0x0c) #define SCD_TXFACT (SCD_BASE + 0x10) #define SCD_ACTIVE (SCD_BASE + 0x14) -#define SCD_QUEUE_WRPTR(x) (SCD_BASE + 0x18 + (x) * 4) -#define SCD_QUEUE_RDPTR(x) (SCD_BASE + 0x68 + (x) * 4) #define SCD_QUEUECHAIN_SEL (SCD_BASE + 0xe8) #define SCD_AGGR_SEL (SCD_BASE + 0x248) #define SCD_INTERRUPT_MASK (SCD_BASE + 0x108) -#define SCD_QUEUE_STATUS_BITS(x) (SCD_BASE + 0x10c + (x) * 4) + +static inline unsigned int SCD_QUEUE_WRPTR(unsigned int chnl) +{ + if (chnl < 20) + return SCD_BASE + 0x18 + chnl * 4; + WARN_ON_ONCE(chnl >= 32); + return SCD_BASE + 0x284 + (chnl - 20) * 4; +} + +static inline unsigned int SCD_QUEUE_RDPTR(unsigned int chnl) +{ + if (chnl < 20) + return SCD_BASE + 0x68 + chnl * 4; + WARN_ON_ONCE(chnl >= 32); + return SCD_BASE + 0x2B4 + (chnl - 20) * 4; +} + +static inline unsigned int SCD_QUEUE_STATUS_BITS(unsigned int chnl) +{ + if (chnl < 20) + return SCD_BASE + 0x10c + chnl * 4; + WARN_ON_ONCE(chnl >= 32); + return SCD_BASE + 0x384 + (chnl - 20) * 4; +} /*********************** END TX SCHEDULER *************************************/ diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 288b035a3579..cc15fdb36060 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -1941,6 +1941,7 @@ void rtl_pci_disconnect(struct pci_dev *pdev) rtl_deinit_deferred_work(hw); rtlpriv->intf_ops->adapter_stop(hw); } + rtlpriv->cfg->ops->disable_interrupt(hw); /*deinit rfkill */ rtl_deinit_rfkill(hw); diff --git a/drivers/net/wireless/wl1251/main.c b/drivers/net/wireless/wl1251/main.c index 41302c7b1ad0..d1afb8e3b2ef 100644 --- a/drivers/net/wireless/wl1251/main.c +++ b/drivers/net/wireless/wl1251/main.c @@ -479,6 +479,7 @@ static void wl1251_op_stop(struct ieee80211_hw *hw) cancel_work_sync(&wl->irq_work); cancel_work_sync(&wl->tx_work); cancel_work_sync(&wl->filter_work); + cancel_delayed_work_sync(&wl->elp_work); mutex_lock(&wl->mutex); diff --git a/drivers/net/wireless/wl1251/sdio.c b/drivers/net/wireless/wl1251/sdio.c index f78694295c39..1b851f650e07 100644 --- a/drivers/net/wireless/wl1251/sdio.c +++ b/drivers/net/wireless/wl1251/sdio.c @@ -315,8 +315,8 @@ static void __devexit wl1251_sdio_remove(struct sdio_func *func) if (wl->irq) free_irq(wl->irq, wl); - kfree(wl_sdio); wl1251_free_hw(wl); + kfree(wl_sdio); sdio_claim_host(func); sdio_release_irq(func); diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 0f150f271c2a..1929c0c63b75 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -200,7 +200,7 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev) return PCI_D1; case ACPI_STATE_D2: return PCI_D2; - case ACPI_STATE_D3: + case ACPI_STATE_D3_HOT: return PCI_D3hot; case ACPI_STATE_D3_COLD: return PCI_D3cold; @@ -223,7 +223,7 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) [PCI_D0] = ACPI_STATE_D0, [PCI_D1] = ACPI_STATE_D1, [PCI_D2] = ACPI_STATE_D2, - [PCI_D3hot] = ACPI_STATE_D3, + [PCI_D3hot] = ACPI_STATE_D3_HOT, [PCI_D3cold] = ACPI_STATE_D3 }; int error = -EINVAL; diff --git a/drivers/platform/x86/intel_mid_powerbtn.c b/drivers/platform/x86/intel_mid_powerbtn.c index 0a3594c7e912..bcbad8452a6f 100644 --- a/drivers/platform/x86/intel_mid_powerbtn.c +++ b/drivers/platform/x86/intel_mid_powerbtn.c @@ -78,7 +78,7 @@ static int __devinit mfld_pb_probe(struct platform_device *pdev) input_set_capability(input, EV_KEY, KEY_POWER); - error = request_threaded_irq(irq, NULL, mfld_pb_isr, 0, + error = request_threaded_irq(irq, NULL, mfld_pb_isr, IRQF_NO_SUSPEND, DRIVER_NAME, input); if (error) { dev_err(&pdev->dev, "Unable to request irq %d for mfld power" diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 8c8377d50c4c..4161bfe462cd 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -838,7 +838,7 @@ config RTC_DRV_AT32AP700X config RTC_DRV_AT91RM9200 tristate "AT91RM9200 or some AT91SAM9 RTC" - depends on ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 + depends on ARCH_AT91 help Driver for the internal RTC (Realtime Clock) module found on Atmel AT91RM9200's and some AT91SAM9 chips. On AT91SAM9 chips diff --git a/drivers/rtc/rtc-mpc5121.c b/drivers/rtc/rtc-mpc5121.c index 42f5f829b3ee..029e421baaed 100644 --- a/drivers/rtc/rtc-mpc5121.c +++ b/drivers/rtc/rtc-mpc5121.c @@ -360,12 +360,11 @@ static int __devinit mpc5121_rtc_probe(struct platform_device *op) &mpc5200_rtc_ops, THIS_MODULE); } - rtc->rtc->uie_unsupported = 1; - if (IS_ERR(rtc->rtc)) { err = PTR_ERR(rtc->rtc); goto out_free_irq; } + rtc->rtc->uie_unsupported = 1; return 0; diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 120955c66410..8334dadc681d 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -1672,7 +1672,8 @@ static void qeth_configure_blkt_default(struct qeth_card *card, char *prcd) { QETH_DBF_TEXT(SETUP, 2, "cfgblkt"); - if (prcd[74] == 0xF0 && prcd[75] == 0xF0 && prcd[76] == 0xF5) { + if (prcd[74] == 0xF0 && prcd[75] == 0xF0 && + (prcd[76] == 0xF5 || prcd[76] == 0xF6)) { card->info.blkt.time_total = 250; card->info.blkt.inter_packet = 5; card->info.blkt.inter_packet_jumbo = 15; @@ -4540,7 +4541,8 @@ static void qeth_determine_capabilities(struct qeth_card *card) goto out_offline; } qeth_configure_unitaddr(card, prcd); - qeth_configure_blkt_default(card, prcd); + if (ddev_offline) + qeth_configure_blkt_default(card, prcd); kfree(prcd); rc = qdio_get_ssqd_desc(ddev, &card->ssqd); diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index e002cd466e9a..467dc38246f9 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -4549,8 +4549,12 @@ static int ipr_ata_slave_alloc(struct scsi_device *sdev) ENTER; if (sdev->sdev_target) sata_port = sdev->sdev_target->hostdata; - if (sata_port) + if (sata_port) { rc = ata_sas_port_init(sata_port->ap); + if (rc == 0) + rc = ata_sas_sync_probe(sata_port->ap); + } + if (rc) ipr_slave_destroy(sdev); diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index ef9560dff295..cc83b66d45b7 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -1742,17 +1742,19 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, mfs = ntohs(flp->fl_csp.sp_bb_data) & FC_SP_BB_DATA_MASK; - if (mfs >= FC_SP_MIN_MAX_PAYLOAD && - mfs <= lport->mfs) { - lport->mfs = mfs; - fc_host_maxframe_size(lport->host) = mfs; - } else { + + if (mfs < FC_SP_MIN_MAX_PAYLOAD || mfs > FC_SP_MAX_MAX_PAYLOAD) { FC_LPORT_DBG(lport, "FLOGI bad mfs:%hu response, " "lport->mfs:%hu\n", mfs, lport->mfs); fc_lport_error(lport, fp); goto err; } + if (mfs <= lport->mfs) { + lport->mfs = mfs; + fc_host_maxframe_size(lport->host) = mfs; + } + csp_flags = ntohs(flp->fl_csp.sp_features); r_a_tov = ntohl(flp->fl_csp.sp_r_a_tov); e_d_tov = ntohl(flp->fl_csp.sp_e_d_tov); diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index bc0cecc6ad62..441d88ad99a7 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -546,11 +546,12 @@ static struct ata_port_info sata_port_info = { .port_ops = &sas_sata_ops }; -int sas_ata_init_host_and_port(struct domain_device *found_dev) +int sas_ata_init(struct domain_device *found_dev) { struct sas_ha_struct *ha = found_dev->port->ha; struct Scsi_Host *shost = ha->core.shost; struct ata_port *ap; + int rc; ata_host_init(&found_dev->sata_dev.ata_host, ha->dev, @@ -567,8 +568,11 @@ int sas_ata_init_host_and_port(struct domain_device *found_dev) ap->private_data = found_dev; ap->cbl = ATA_CBL_SATA; ap->scsi_host = shost; - /* publish initialized ata port */ - smp_wmb(); + rc = ata_sas_port_init(ap); + if (rc) { + ata_sas_port_destroy(ap); + return rc; + } found_dev->sata_dev.ap = ap; return 0; @@ -648,18 +652,13 @@ static void sas_get_ata_command_set(struct domain_device *dev) void sas_probe_sata(struct asd_sas_port *port) { struct domain_device *dev, *n; - int err; mutex_lock(&port->ha->disco_mutex); - list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) { + list_for_each_entry(dev, &port->disco_list, disco_list_node) { if (!dev_is_sata(dev)) continue; - err = sas_ata_init_host_and_port(dev); - if (err) - sas_fail_probe(dev, __func__, err); - else - ata_sas_async_port_init(dev->sata_dev.ap); + ata_sas_async_probe(dev->sata_dev.ap); } mutex_unlock(&port->ha->disco_mutex); @@ -718,18 +717,6 @@ static void async_sas_ata_eh(void *data, async_cookie_t cookie) sas_put_device(dev); } -static bool sas_ata_dev_eh_valid(struct domain_device *dev) -{ - struct ata_port *ap; - - if (!dev_is_sata(dev)) - return false; - ap = dev->sata_dev.ap; - /* consume fully initialized ata ports */ - smp_rmb(); - return !!ap; -} - void sas_ata_strategy_handler(struct Scsi_Host *shost) { struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); @@ -753,7 +740,7 @@ void sas_ata_strategy_handler(struct Scsi_Host *shost) spin_lock(&port->dev_list_lock); list_for_each_entry(dev, &port->dev_list, dev_list_node) { - if (!sas_ata_dev_eh_valid(dev)) + if (!dev_is_sata(dev)) continue; async_schedule_domain(async_sas_ata_eh, dev, &async); } diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 364679675602..629a0865b130 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -72,6 +72,7 @@ static int sas_get_port_device(struct asd_sas_port *port) struct asd_sas_phy *phy; struct sas_rphy *rphy; struct domain_device *dev; + int rc = -ENODEV; dev = sas_alloc_device(); if (!dev) @@ -110,9 +111,16 @@ static int sas_get_port_device(struct asd_sas_port *port) sas_init_dev(dev); + dev->port = port; switch (dev->dev_type) { - case SAS_END_DEV: case SATA_DEV: + rc = sas_ata_init(dev); + if (rc) { + rphy = NULL; + break; + } + /* fall through */ + case SAS_END_DEV: rphy = sas_end_device_alloc(port->port); break; case EDGE_DEV: @@ -131,19 +139,14 @@ static int sas_get_port_device(struct asd_sas_port *port) if (!rphy) { sas_put_device(dev); - return -ENODEV; + return rc; } - spin_lock_irq(&port->phy_list_lock); - list_for_each_entry(phy, &port->phy_list, port_phy_el) - sas_phy_set_target(phy, dev); - spin_unlock_irq(&port->phy_list_lock); rphy->identify.phy_identifier = phy->phy->identify.phy_identifier; memcpy(dev->sas_addr, port->attached_sas_addr, SAS_ADDR_SIZE); sas_fill_in_rphy(dev, rphy); sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr); port->port_dev = dev; - dev->port = port; dev->linkrate = port->linkrate; dev->min_linkrate = port->linkrate; dev->max_linkrate = port->linkrate; @@ -155,6 +158,7 @@ static int sas_get_port_device(struct asd_sas_port *port) sas_device_set_phy(dev, port->port); dev->rphy = rphy; + get_device(&dev->rphy->dev); if (dev_is_sata(dev) || dev->dev_type == SAS_END_DEV) list_add_tail(&dev->disco_list_node, &port->disco_list); @@ -164,6 +168,11 @@ static int sas_get_port_device(struct asd_sas_port *port) spin_unlock_irq(&port->dev_list_lock); } + spin_lock_irq(&port->phy_list_lock); + list_for_each_entry(phy, &port->phy_list, port_phy_el) + sas_phy_set_target(phy, dev); + spin_unlock_irq(&port->phy_list_lock); + return 0; } @@ -205,8 +214,7 @@ void sas_notify_lldd_dev_gone(struct domain_device *dev) static void sas_probe_devices(struct work_struct *work) { struct domain_device *dev, *n; - struct sas_discovery_event *ev = - container_of(work, struct sas_discovery_event, work); + struct sas_discovery_event *ev = to_sas_discovery_event(work); struct asd_sas_port *port = ev->port; clear_bit(DISCE_PROBE, &port->disc.pending); @@ -255,6 +263,9 @@ void sas_free_device(struct kref *kref) { struct domain_device *dev = container_of(kref, typeof(*dev), kref); + put_device(&dev->rphy->dev); + dev->rphy = NULL; + if (dev->parent) sas_put_device(dev->parent); @@ -291,8 +302,7 @@ static void sas_unregister_common_dev(struct asd_sas_port *port, struct domain_d static void sas_destruct_devices(struct work_struct *work) { struct domain_device *dev, *n; - struct sas_discovery_event *ev = - container_of(work, struct sas_discovery_event, work); + struct sas_discovery_event *ev = to_sas_discovery_event(work); struct asd_sas_port *port = ev->port; clear_bit(DISCE_DESTRUCT, &port->disc.pending); @@ -302,7 +312,6 @@ static void sas_destruct_devices(struct work_struct *work) sas_remove_children(&dev->rphy->dev); sas_rphy_delete(dev->rphy); - dev->rphy = NULL; sas_unregister_common_dev(port, dev); } } @@ -314,11 +323,11 @@ void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *dev) /* this rphy never saw sas_rphy_add */ list_del_init(&dev->disco_list_node); sas_rphy_free(dev->rphy); - dev->rphy = NULL; sas_unregister_common_dev(port, dev); + return; } - if (dev->rphy && !test_and_set_bit(SAS_DEV_DESTROY, &dev->state)) { + if (!test_and_set_bit(SAS_DEV_DESTROY, &dev->state)) { sas_rphy_unlink(dev->rphy); list_move_tail(&dev->disco_list_node, &port->destroy_list); sas_discover_event(dev->port, DISCE_DESTRUCT); @@ -377,8 +386,7 @@ static void sas_discover_domain(struct work_struct *work) { struct domain_device *dev; int error = 0; - struct sas_discovery_event *ev = - container_of(work, struct sas_discovery_event, work); + struct sas_discovery_event *ev = to_sas_discovery_event(work); struct asd_sas_port *port = ev->port; clear_bit(DISCE_DISCOVER_DOMAIN, &port->disc.pending); @@ -419,8 +427,6 @@ static void sas_discover_domain(struct work_struct *work) if (error) { sas_rphy_free(dev->rphy); - dev->rphy = NULL; - list_del_init(&dev->disco_list_node); spin_lock_irq(&port->dev_list_lock); list_del_init(&dev->dev_list_node); @@ -437,8 +443,7 @@ static void sas_discover_domain(struct work_struct *work) static void sas_revalidate_domain(struct work_struct *work) { int res = 0; - struct sas_discovery_event *ev = - container_of(work, struct sas_discovery_event, work); + struct sas_discovery_event *ev = to_sas_discovery_event(work); struct asd_sas_port *port = ev->port; struct sas_ha_struct *ha = port->ha; @@ -466,21 +471,25 @@ static void sas_revalidate_domain(struct work_struct *work) /* ---------- Events ---------- */ -static void sas_chain_work(struct sas_ha_struct *ha, struct work_struct *work) +static void sas_chain_work(struct sas_ha_struct *ha, struct sas_work *sw) { - /* chained work is not subject to SA_HA_DRAINING or SAS_HA_REGISTERED */ - scsi_queue_work(ha->core.shost, work); + /* chained work is not subject to SA_HA_DRAINING or + * SAS_HA_REGISTERED, because it is either submitted in the + * workqueue, or known to be submitted from a context that is + * not racing against draining + */ + scsi_queue_work(ha->core.shost, &sw->work); } static void sas_chain_event(int event, unsigned long *pending, - struct work_struct *work, + struct sas_work *sw, struct sas_ha_struct *ha) { if (!test_and_set_bit(event, pending)) { unsigned long flags; spin_lock_irqsave(&ha->state_lock, flags); - sas_chain_work(ha, work); + sas_chain_work(ha, sw); spin_unlock_irqrestore(&ha->state_lock, flags); } } @@ -519,7 +528,7 @@ void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *port) disc->pending = 0; for (i = 0; i < DISC_NUM_EVENTS; i++) { - INIT_WORK(&disc->disc_work[i].work, sas_event_fns[i]); + INIT_SAS_WORK(&disc->disc_work[i].work, sas_event_fns[i]); disc->disc_work[i].port = port; } } diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c index 16639bbae629..4e4292d210c1 100644 --- a/drivers/scsi/libsas/sas_event.c +++ b/drivers/scsi/libsas/sas_event.c @@ -27,19 +27,21 @@ #include "sas_internal.h" #include "sas_dump.h" -void sas_queue_work(struct sas_ha_struct *ha, struct work_struct *work) +void sas_queue_work(struct sas_ha_struct *ha, struct sas_work *sw) { if (!test_bit(SAS_HA_REGISTERED, &ha->state)) return; - if (test_bit(SAS_HA_DRAINING, &ha->state)) - list_add(&work->entry, &ha->defer_q); - else - scsi_queue_work(ha->core.shost, work); + if (test_bit(SAS_HA_DRAINING, &ha->state)) { + /* add it to the defer list, if not already pending */ + if (list_empty(&sw->drain_node)) + list_add(&sw->drain_node, &ha->defer_q); + } else + scsi_queue_work(ha->core.shost, &sw->work); } static void sas_queue_event(int event, unsigned long *pending, - struct work_struct *work, + struct sas_work *work, struct sas_ha_struct *ha) { if (!test_and_set_bit(event, pending)) { @@ -55,7 +57,7 @@ static void sas_queue_event(int event, unsigned long *pending, void __sas_drain_work(struct sas_ha_struct *ha) { struct workqueue_struct *wq = ha->core.shost->work_q; - struct work_struct *w, *_w; + struct sas_work *sw, *_sw; set_bit(SAS_HA_DRAINING, &ha->state); /* flush submitters */ @@ -66,9 +68,9 @@ void __sas_drain_work(struct sas_ha_struct *ha) spin_lock_irq(&ha->state_lock); clear_bit(SAS_HA_DRAINING, &ha->state); - list_for_each_entry_safe(w, _w, &ha->defer_q, entry) { - list_del_init(&w->entry); - sas_queue_work(ha, w); + list_for_each_entry_safe(sw, _sw, &ha->defer_q, drain_node) { + list_del_init(&sw->drain_node); + sas_queue_work(ha, sw); } spin_unlock_irq(&ha->state_lock); } @@ -151,7 +153,7 @@ int sas_init_events(struct sas_ha_struct *sas_ha) int i; for (i = 0; i < HA_NUM_EVENTS; i++) { - INIT_WORK(&sas_ha->ha_events[i].work, sas_ha_event_fns[i]); + INIT_SAS_WORK(&sas_ha->ha_events[i].work, sas_ha_event_fns[i]); sas_ha->ha_events[i].ha = sas_ha; } diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 05acd9e35fc4..caa0525d2523 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -202,6 +202,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) u8 sas_addr[SAS_ADDR_SIZE]; struct smp_resp *resp = rsp; struct discover_resp *dr = &resp->disc; + struct sas_ha_struct *ha = dev->port->ha; struct expander_device *ex = &dev->ex_dev; struct ex_phy *phy = &ex->ex_phy[phy_id]; struct sas_rphy *rphy = dev->rphy; @@ -209,6 +210,8 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) char *type; if (new_phy) { + if (WARN_ON_ONCE(test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state))) + return; phy->phy = sas_phy_alloc(&rphy->dev, phy_id); /* FIXME: error_handling */ @@ -233,6 +236,8 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) memcpy(sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); phy->attached_dev_type = to_dev_type(dr); + if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) + goto out; phy->phy_id = phy_id; phy->linkrate = dr->linkrate; phy->attached_sata_host = dr->attached_sata_host; @@ -240,7 +245,14 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) phy->attached_sata_ps = dr->attached_sata_ps; phy->attached_iproto = dr->iproto << 1; phy->attached_tproto = dr->tproto << 1; - memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE); + /* help some expanders that fail to zero sas_address in the 'no + * device' case + */ + if (phy->attached_dev_type == NO_DEVICE || + phy->linkrate < SAS_LINK_RATE_1_5_GBPS) + memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE); + else + memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE); phy->attached_phy_id = dr->attached_phy_id; phy->phy_change_count = dr->change_count; phy->routing_attr = dr->routing_attr; @@ -266,6 +278,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) return; } + out: switch (phy->attached_dev_type) { case SATA_PENDING: type = "stp pending"; @@ -304,7 +317,15 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) else return; - SAS_DPRINTK("ex %016llx phy%02d:%c:%X attached: %016llx (%s)\n", + /* if the attached device type changed and ata_eh is active, + * make sure we run revalidation when eh completes (see: + * sas_enable_revalidation) + */ + if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) + set_bit(DISCE_REVALIDATE_DOMAIN, &dev->port->disc.pending); + + SAS_DPRINTK("%sex %016llx phy%02d:%c:%X attached: %016llx (%s)\n", + test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state) ? "ata: " : "", SAS_ADDR(dev->sas_addr), phy->phy_id, sas_route_char(dev, phy), phy->linkrate, SAS_ADDR(phy->attached_sas_addr), type); @@ -776,13 +797,16 @@ static struct domain_device *sas_ex_discover_end_dev( if (res) goto out_free; + sas_init_dev(child); + res = sas_ata_init(child); + if (res) + goto out_free; rphy = sas_end_device_alloc(phy->port); - if (unlikely(!rphy)) + if (!rphy) goto out_free; - sas_init_dev(child); - child->rphy = rphy; + get_device(&rphy->dev); list_add_tail(&child->disco_list_node, &parent->port->disco_list); @@ -806,6 +830,7 @@ static struct domain_device *sas_ex_discover_end_dev( sas_init_dev(child); child->rphy = rphy; + get_device(&rphy->dev); sas_fill_in_rphy(child, rphy); list_add_tail(&child->disco_list_node, &parent->port->disco_list); @@ -830,8 +855,6 @@ static struct domain_device *sas_ex_discover_end_dev( out_list_del: sas_rphy_free(child->rphy); - child->rphy = NULL; - list_del(&child->disco_list_node); spin_lock_irq(&parent->port->dev_list_lock); list_del(&child->dev_list_node); @@ -911,6 +934,7 @@ static struct domain_device *sas_ex_discover_expander( } port = parent->port; child->rphy = rphy; + get_device(&rphy->dev); edev = rphy_to_expander_device(rphy); child->dev_type = phy->attached_dev_type; kref_get(&parent->kref); @@ -934,6 +958,7 @@ static struct domain_device *sas_ex_discover_expander( res = sas_discover_expander(child); if (res) { + sas_rphy_delete(rphy); spin_lock_irq(&parent->port->dev_list_lock); list_del(&child->dev_list_node); spin_unlock_irq(&parent->port->dev_list_lock); @@ -1718,9 +1743,17 @@ static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id, int phy_change_count = 0; res = sas_get_phy_change_count(dev, i, &phy_change_count); - if (res) - goto out; - else if (phy_change_count != ex->ex_phy[i].phy_change_count) { + switch (res) { + case SMP_RESP_PHY_VACANT: + case SMP_RESP_NO_PHY: + continue; + case SMP_RESP_FUNC_ACC: + break; + default: + return res; + } + + if (phy_change_count != ex->ex_phy[i].phy_change_count) { if (update) ex->ex_phy[i].phy_change_count = phy_change_count; @@ -1728,8 +1761,7 @@ static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id, return 0; } } -out: - return res; + return 0; } static int sas_get_ex_change_count(struct domain_device *dev, int *ecc) diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c index 120bff64be30..10cb5ae30977 100644 --- a/drivers/scsi/libsas/sas_init.c +++ b/drivers/scsi/libsas/sas_init.c @@ -94,8 +94,7 @@ void sas_hash_addr(u8 *hashed, const u8 *sas_addr) void sas_hae_reset(struct work_struct *work) { - struct sas_ha_event *ev = - container_of(work, struct sas_ha_event, work); + struct sas_ha_event *ev = to_sas_ha_event(work); struct sas_ha_struct *ha = ev->ha; clear_bit(HAE_RESET, &ha->pending); @@ -369,14 +368,14 @@ static void sas_phy_release(struct sas_phy *phy) static void phy_reset_work(struct work_struct *work) { - struct sas_phy_data *d = container_of(work, typeof(*d), reset_work); + struct sas_phy_data *d = container_of(work, typeof(*d), reset_work.work); d->reset_result = transport_sas_phy_reset(d->phy, d->hard_reset); } static void phy_enable_work(struct work_struct *work) { - struct sas_phy_data *d = container_of(work, typeof(*d), enable_work); + struct sas_phy_data *d = container_of(work, typeof(*d), enable_work.work); d->enable_result = sas_phy_enable(d->phy, d->enable); } @@ -389,8 +388,8 @@ static int sas_phy_setup(struct sas_phy *phy) return -ENOMEM; mutex_init(&d->event_lock); - INIT_WORK(&d->reset_work, phy_reset_work); - INIT_WORK(&d->enable_work, phy_enable_work); + INIT_SAS_WORK(&d->reset_work, phy_reset_work); + INIT_SAS_WORK(&d->enable_work, phy_enable_work); d->phy = phy; phy->hostdata = d; diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index f05c63879949..507e4cf12e56 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -45,10 +45,10 @@ struct sas_phy_data { struct mutex event_lock; int hard_reset; int reset_result; - struct work_struct reset_work; + struct sas_work reset_work; int enable; int enable_result; - struct work_struct enable_work; + struct sas_work enable_work; }; void sas_scsi_recover_host(struct Scsi_Host *shost); @@ -80,7 +80,7 @@ void sas_porte_broadcast_rcvd(struct work_struct *work); void sas_porte_link_reset_err(struct work_struct *work); void sas_porte_timer_event(struct work_struct *work); void sas_porte_hard_reset(struct work_struct *work); -void sas_queue_work(struct sas_ha_struct *ha, struct work_struct *work); +void sas_queue_work(struct sas_ha_struct *ha, struct sas_work *sw); int sas_notify_lldd_dev_found(struct domain_device *); void sas_notify_lldd_dev_gone(struct domain_device *); diff --git a/drivers/scsi/libsas/sas_phy.c b/drivers/scsi/libsas/sas_phy.c index dcfd4a9105c5..521422e857ab 100644 --- a/drivers/scsi/libsas/sas_phy.c +++ b/drivers/scsi/libsas/sas_phy.c @@ -32,8 +32,7 @@ static void sas_phye_loss_of_signal(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; clear_bit(PHYE_LOSS_OF_SIGNAL, &phy->phy_events_pending); @@ -43,8 +42,7 @@ static void sas_phye_loss_of_signal(struct work_struct *work) static void sas_phye_oob_done(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; clear_bit(PHYE_OOB_DONE, &phy->phy_events_pending); @@ -53,8 +51,7 @@ static void sas_phye_oob_done(struct work_struct *work) static void sas_phye_oob_error(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; struct sas_ha_struct *sas_ha = phy->ha; struct asd_sas_port *port = phy->port; @@ -85,8 +82,7 @@ static void sas_phye_oob_error(struct work_struct *work) static void sas_phye_spinup_hold(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; struct sas_ha_struct *sas_ha = phy->ha; struct sas_internal *i = @@ -127,14 +123,12 @@ int sas_register_phys(struct sas_ha_struct *sas_ha) phy->error = 0; INIT_LIST_HEAD(&phy->port_phy_el); for (k = 0; k < PORT_NUM_EVENTS; k++) { - INIT_WORK(&phy->port_events[k].work, - sas_port_event_fns[k]); + INIT_SAS_WORK(&phy->port_events[k].work, sas_port_event_fns[k]); phy->port_events[k].phy = phy; } for (k = 0; k < PHY_NUM_EVENTS; k++) { - INIT_WORK(&phy->phy_events[k].work, - sas_phy_event_fns[k]); + INIT_SAS_WORK(&phy->phy_events[k].work, sas_phy_event_fns[k]); phy->phy_events[k].phy = phy; } @@ -144,8 +138,7 @@ int sas_register_phys(struct sas_ha_struct *sas_ha) spin_lock_init(&phy->sas_prim_lock); phy->frame_rcvd_size = 0; - phy->phy = sas_phy_alloc(&sas_ha->core.shost->shost_gendev, - i); + phy->phy = sas_phy_alloc(&sas_ha->core.shost->shost_gendev, i); if (!phy->phy) return -ENOMEM; diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c index eb19c016d500..e884a8c58a0c 100644 --- a/drivers/scsi/libsas/sas_port.c +++ b/drivers/scsi/libsas/sas_port.c @@ -123,7 +123,7 @@ static void sas_form_port(struct asd_sas_phy *phy) spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags); if (!port->port) { - port->port = sas_port_alloc(phy->phy->dev.parent, phy->id); + port->port = sas_port_alloc(phy->phy->dev.parent, port->id); BUG_ON(!port->port); sas_port_add(port->port); } @@ -208,8 +208,7 @@ void sas_deform_port(struct asd_sas_phy *phy, int gone) void sas_porte_bytes_dmaed(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; clear_bit(PORTE_BYTES_DMAED, &phy->port_events_pending); @@ -219,8 +218,7 @@ void sas_porte_bytes_dmaed(struct work_struct *work) void sas_porte_broadcast_rcvd(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; unsigned long flags; u32 prim; @@ -237,8 +235,7 @@ void sas_porte_broadcast_rcvd(struct work_struct *work) void sas_porte_link_reset_err(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; clear_bit(PORTE_LINK_RESET_ERR, &phy->port_events_pending); @@ -248,8 +245,7 @@ void sas_porte_link_reset_err(struct work_struct *work) void sas_porte_timer_event(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; clear_bit(PORTE_TIMER_EVENT, &phy->port_events_pending); @@ -259,8 +255,7 @@ void sas_porte_timer_event(struct work_struct *work) void sas_porte_hard_reset(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; clear_bit(PORTE_HARD_RESET, &phy->port_events_pending); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index ead6405f3e51..5dfd7495d1a1 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1638,7 +1638,7 @@ struct request_queue *__scsi_alloc_queue(struct Scsi_Host *shost, request_fn_proc *request_fn) { struct request_queue *q; - struct device *dev = shost->shost_gendev.parent; + struct device *dev = shost->dma_dev; q = blk_init_queue(request_fn, NULL); if (!q) diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 08ebe901bb59..654755a990df 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -469,7 +469,7 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id) tty = NULL; if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { if (!ZS_IS_OPEN(uap_a)) { - pmz_debug("ChanA interrupt while open !\n"); + pmz_debug("ChanA interrupt while not open !\n"); goto skip_a; } write_zsreg(uap_a, R0, RES_H_IUS); @@ -493,8 +493,8 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id) spin_lock(&uap_b->port.lock); tty = NULL; if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { - if (!ZS_IS_OPEN(uap_a)) { - pmz_debug("ChanB interrupt while open !\n"); + if (!ZS_IS_OPEN(uap_b)) { + pmz_debug("ChanB interrupt while not open !\n"); goto skip_b; } write_zsreg(uap_b, R0, RES_H_IUS); diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index 86dd1e302bb3..29ca20dbd335 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -1085,15 +1085,21 @@ void vt_set_led_state(int console, int leds) * * Handle console start. This is a wrapper for the VT layer * so that we can keep kbd knowledge internal + * + * FIXME: We eventually need to hold the kbd lock here to protect + * the LED updating. We can't do it yet because fn_hold calls stop_tty + * and start_tty under the kbd_event_lock, while normal tty paths + * don't hold the lock. We probably need to split out an LED lock + * but not during an -rc release! */ void vt_kbd_con_start(int console) { struct kbd_struct * kbd = kbd_table + console; - unsigned long flags; - spin_lock_irqsave(&kbd_event_lock, flags); +/* unsigned long flags; */ +/* spin_lock_irqsave(&kbd_event_lock, flags); */ clr_vc_kbd_led(kbd, VC_SCROLLOCK); set_leds(); - spin_unlock_irqrestore(&kbd_event_lock, flags); +/* spin_unlock_irqrestore(&kbd_event_lock, flags); */ } /** @@ -1102,22 +1108,28 @@ void vt_kbd_con_start(int console) * * Handle console stop. This is a wrapper for the VT layer * so that we can keep kbd knowledge internal + * + * FIXME: We eventually need to hold the kbd lock here to protect + * the LED updating. We can't do it yet because fn_hold calls stop_tty + * and start_tty under the kbd_event_lock, while normal tty paths + * don't hold the lock. We probably need to split out an LED lock + * but not during an -rc release! */ void vt_kbd_con_stop(int console) { struct kbd_struct * kbd = kbd_table + console; - unsigned long flags; - spin_lock_irqsave(&kbd_event_lock, flags); +/* unsigned long flags; */ +/* spin_lock_irqsave(&kbd_event_lock, flags); */ set_vc_kbd_led(kbd, VC_SCROLLOCK); set_leds(); - spin_unlock_irqrestore(&kbd_event_lock, flags); +/* spin_unlock_irqrestore(&kbd_event_lock, flags); */ } /* * This is the tasklet that updates LED state on all keyboards * attached to the box. The reason we use tasklet is that we * need to handle the scenario when keyboard handler is not - * registered yet but we already getting updates form VT to + * registered yet but we already getting updates from the VT to * update led state. */ static void kbd_bh(unsigned long dummy) diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 86183366647f..f214a80cdee2 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -24,6 +24,7 @@ #include <linux/gpio.h> #include <linux/of.h> #include <linux/of_gpio.h> +#include <linux/pm_runtime.h> #include <mach/usb_phy.h> #include <mach/iomap.h> @@ -37,9 +38,7 @@ struct tegra_ehci_hcd { struct clk *emc_clk; struct usb_phy *transceiver; int host_resumed; - int bus_suspended; int port_resuming; - int power_down_on_bus_suspend; enum tegra_usb_phy_port_speed port_speed; }; @@ -273,120 +272,6 @@ static void tegra_ehci_restart(struct usb_hcd *hcd) up_write(&ehci_cf_port_reset_rwsem); } -static int tegra_usb_suspend(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - struct ehci_regs __iomem *hw = tegra->ehci->regs; - unsigned long flags; - - spin_lock_irqsave(&tegra->ehci->lock, flags); - - tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3; - ehci_halt(tegra->ehci); - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - - spin_unlock_irqrestore(&tegra->ehci->lock, flags); - - tegra_ehci_power_down(hcd); - return 0; -} - -static int tegra_usb_resume(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - struct ehci_regs __iomem *hw = ehci->regs; - unsigned long val; - - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - tegra_ehci_power_up(hcd); - - if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) { - /* Wait for the phy to detect new devices - * before we restart the controller */ - msleep(10); - goto restart; - } - - /* Force the phy to keep data lines in suspend state */ - tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed); - - /* Enable host mode */ - tdi_reset(ehci); - - /* Enable Port Power */ - val = readl(&hw->port_status[0]); - val |= PORT_POWER; - writel(val, &hw->port_status[0]); - udelay(10); - - /* Check if the phy resume from LP0. When the phy resume from LP0 - * USB register will be reset. */ - if (!readl(&hw->async_next)) { - /* Program the field PTC based on the saved speed mode */ - val = readl(&hw->port_status[0]); - val &= ~PORT_TEST(~0); - if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH) - val |= PORT_TEST_FORCE; - else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL) - val |= PORT_TEST(6); - else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) - val |= PORT_TEST(7); - writel(val, &hw->port_status[0]); - udelay(10); - - /* Disable test mode by setting PTC field to NORMAL_OP */ - val = readl(&hw->port_status[0]); - val &= ~PORT_TEST(~0); - writel(val, &hw->port_status[0]); - udelay(10); - } - - /* Poll until CCS is enabled */ - if (handshake(ehci, &hw->port_status[0], PORT_CONNECT, - PORT_CONNECT, 2000)) { - pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__); - goto restart; - } - - /* Poll until PE is enabled */ - if (handshake(ehci, &hw->port_status[0], PORT_PE, - PORT_PE, 2000)) { - pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__); - goto restart; - } - - /* Clear the PCI status, to avoid an interrupt taken upon resume */ - val = readl(&hw->status); - val |= STS_PCD; - writel(val, &hw->status); - - /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */ - val = readl(&hw->port_status[0]); - if ((val & PORT_POWER) && (val & PORT_PE)) { - val |= PORT_SUSPEND; - writel(val, &hw->port_status[0]); - - /* Wait until port suspend completes */ - if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND, - PORT_SUSPEND, 1000)) { - pr_err("%s: timeout waiting for PORT_SUSPEND\n", - __func__); - goto restart; - } - } - - tegra_ehci_phy_restore_end(tegra->phy); - return 0; - -restart: - if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH) - tegra_ehci_phy_restore_end(tegra->phy); - - tegra_ehci_restart(hcd); - return 0; -} - static void tegra_ehci_shutdown(struct usb_hcd *hcd) { struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); @@ -434,36 +319,6 @@ static int tegra_ehci_setup(struct usb_hcd *hcd) return retval; } -#ifdef CONFIG_PM -static int tegra_ehci_bus_suspend(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - int error_status = 0; - - error_status = ehci_bus_suspend(hcd); - if (!error_status && tegra->power_down_on_bus_suspend) { - tegra_usb_suspend(hcd); - tegra->bus_suspended = 1; - } - - return error_status; -} - -static int tegra_ehci_bus_resume(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - - if (tegra->bus_suspended && tegra->power_down_on_bus_suspend) { - tegra_usb_resume(hcd); - tegra->bus_suspended = 0; - } - - tegra_usb_phy_preresume(tegra->phy); - tegra->port_resuming = 1; - return ehci_bus_resume(hcd); -} -#endif - struct temp_buffer { void *kmalloc_ptr; void *old_xfer_buffer; @@ -574,8 +429,8 @@ static const struct hc_driver tegra_ehci_hc_driver = { .hub_control = tegra_ehci_hub_control, .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, #ifdef CONFIG_PM - .bus_suspend = tegra_ehci_bus_suspend, - .bus_resume = tegra_ehci_bus_resume, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, #endif .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, @@ -603,11 +458,187 @@ static int setup_vbus_gpio(struct platform_device *pdev) dev_err(&pdev->dev, "can't enable vbus\n"); return err; } - gpio_set_value(gpio, 1); return err; } +#ifdef CONFIG_PM + +static int controller_suspend(struct device *dev) +{ + struct tegra_ehci_hcd *tegra = + platform_get_drvdata(to_platform_device(dev)); + struct ehci_hcd *ehci = tegra->ehci; + struct usb_hcd *hcd = ehci_to_hcd(ehci); + struct ehci_regs __iomem *hw = ehci->regs; + unsigned long flags; + + if (time_before(jiffies, ehci->next_statechange)) + msleep(10); + + spin_lock_irqsave(&ehci->lock, flags); + + tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3; + ehci_halt(ehci); + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + spin_unlock_irqrestore(&ehci->lock, flags); + + tegra_ehci_power_down(hcd); + return 0; +} + +static int controller_resume(struct device *dev) +{ + struct tegra_ehci_hcd *tegra = + platform_get_drvdata(to_platform_device(dev)); + struct ehci_hcd *ehci = tegra->ehci; + struct usb_hcd *hcd = ehci_to_hcd(ehci); + struct ehci_regs __iomem *hw = ehci->regs; + unsigned long val; + + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + tegra_ehci_power_up(hcd); + + if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) { + /* Wait for the phy to detect new devices + * before we restart the controller */ + msleep(10); + goto restart; + } + + /* Force the phy to keep data lines in suspend state */ + tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed); + + /* Enable host mode */ + tdi_reset(ehci); + + /* Enable Port Power */ + val = readl(&hw->port_status[0]); + val |= PORT_POWER; + writel(val, &hw->port_status[0]); + udelay(10); + + /* Check if the phy resume from LP0. When the phy resume from LP0 + * USB register will be reset. */ + if (!readl(&hw->async_next)) { + /* Program the field PTC based on the saved speed mode */ + val = readl(&hw->port_status[0]); + val &= ~PORT_TEST(~0); + if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH) + val |= PORT_TEST_FORCE; + else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL) + val |= PORT_TEST(6); + else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) + val |= PORT_TEST(7); + writel(val, &hw->port_status[0]); + udelay(10); + + /* Disable test mode by setting PTC field to NORMAL_OP */ + val = readl(&hw->port_status[0]); + val &= ~PORT_TEST(~0); + writel(val, &hw->port_status[0]); + udelay(10); + } + + /* Poll until CCS is enabled */ + if (handshake(ehci, &hw->port_status[0], PORT_CONNECT, + PORT_CONNECT, 2000)) { + pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__); + goto restart; + } + + /* Poll until PE is enabled */ + if (handshake(ehci, &hw->port_status[0], PORT_PE, + PORT_PE, 2000)) { + pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__); + goto restart; + } + + /* Clear the PCI status, to avoid an interrupt taken upon resume */ + val = readl(&hw->status); + val |= STS_PCD; + writel(val, &hw->status); + + /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */ + val = readl(&hw->port_status[0]); + if ((val & PORT_POWER) && (val & PORT_PE)) { + val |= PORT_SUSPEND; + writel(val, &hw->port_status[0]); + + /* Wait until port suspend completes */ + if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND, + PORT_SUSPEND, 1000)) { + pr_err("%s: timeout waiting for PORT_SUSPEND\n", + __func__); + goto restart; + } + } + + tegra_ehci_phy_restore_end(tegra->phy); + goto done; + + restart: + if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH) + tegra_ehci_phy_restore_end(tegra->phy); + + tegra_ehci_restart(hcd); + + done: + tegra_usb_phy_preresume(tegra->phy); + tegra->port_resuming = 1; + return 0; +} + +static int tegra_ehci_suspend(struct device *dev) +{ + struct tegra_ehci_hcd *tegra = + platform_get_drvdata(to_platform_device(dev)); + struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); + int rc = 0; + + /* + * When system sleep is supported and USB controller wakeup is + * implemented: If the controller is runtime-suspended and the + * wakeup setting needs to be changed, call pm_runtime_resume(). + */ + if (HCD_HW_ACCESSIBLE(hcd)) + rc = controller_suspend(dev); + return rc; +} + +static int tegra_ehci_resume(struct device *dev) +{ + int rc; + + rc = controller_resume(dev); + if (rc == 0) { + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + } + return rc; +} + +static int tegra_ehci_runtime_suspend(struct device *dev) +{ + return controller_suspend(dev); +} + +static int tegra_ehci_runtime_resume(struct device *dev) +{ + return controller_resume(dev); +} + +static const struct dev_pm_ops tegra_ehci_pm_ops = { + .suspend = tegra_ehci_suspend, + .resume = tegra_ehci_resume, + .runtime_suspend = tegra_ehci_runtime_suspend, + .runtime_resume = tegra_ehci_runtime_resume, +}; + +#endif + static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32); static int tegra_ehci_probe(struct platform_device *pdev) @@ -722,7 +753,6 @@ static int tegra_ehci_probe(struct platform_device *pdev) } tegra->host_resumed = 1; - tegra->power_down_on_bus_suspend = pdata->power_down_on_bus_suspend; tegra->ehci = hcd_to_ehci(hcd); irq = platform_get_irq(pdev, 0); @@ -746,6 +776,14 @@ static int tegra_ehci_probe(struct platform_device *pdev) goto fail; } + pm_runtime_set_active(&pdev->dev); + pm_runtime_get_noresume(&pdev->dev); + + /* Don't skip the pm_runtime_forbid call if wakeup isn't working */ + /* if (!pdata->power_down_on_bus_suspend) */ + pm_runtime_forbid(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); return err; fail: @@ -772,33 +810,6 @@ fail_hcd: return err; } -#ifdef CONFIG_PM -static int tegra_ehci_resume(struct platform_device *pdev) -{ - struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); - - if (tegra->bus_suspended) - return 0; - - return tegra_usb_resume(hcd); -} - -static int tegra_ehci_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); - - if (tegra->bus_suspended) - return 0; - - if (time_before(jiffies, tegra->ehci->next_statechange)) - msleep(10); - - return tegra_usb_suspend(hcd); -} -#endif - static int tegra_ehci_remove(struct platform_device *pdev) { struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); @@ -807,6 +818,10 @@ static int tegra_ehci_remove(struct platform_device *pdev) if (tegra == NULL || hcd == NULL) return -EINVAL; + pm_runtime_get_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + #ifdef CONFIG_USB_OTG_UTILS if (tegra->transceiver) { otg_set_host(tegra->transceiver->otg, NULL); @@ -847,13 +862,12 @@ static struct of_device_id tegra_ehci_of_match[] __devinitdata = { static struct platform_driver tegra_ehci_driver = { .probe = tegra_ehci_probe, .remove = tegra_ehci_remove, -#ifdef CONFIG_PM - .suspend = tegra_ehci_suspend, - .resume = tegra_ehci_resume, -#endif .shutdown = tegra_ehci_hcd_shutdown, .driver = { .name = "tegra-ehci", .of_match_table = tegra_ehci_of_match, +#ifdef CONFIG_PM + .pm = &tegra_ehci_pm_ops, +#endif } }; diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 96451e41ee8a..71229cb97e3e 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -205,8 +205,9 @@ static int ohci_omap_init(struct usb_hcd *hcd) need_transceiver = need_transceiver || machine_is_omap_h2() || machine_is_omap_h3(); - if (cpu_is_omap16xx()) - ocpi_enable(); + /* XXX OMAP16xx only */ + if (config->ocpi_enable) + config->ocpi_enable(); #ifdef CONFIG_USB_OTG if (need_transceiver) { diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig index 408a9927be92..c3853c92279b 100644 --- a/drivers/video/omap2/displays/Kconfig +++ b/drivers/video/omap2/displays/Kconfig @@ -10,12 +10,12 @@ config PANEL_GENERIC_DPI Supports LCD Panel used in TI SDP3430 and EVM boards, OMAP3517 EVM boards and CM-T35. -config PANEL_DVI - tristate "DVI output" +config PANEL_TFP410 + tristate "TFP410 DPI-to-DVI chip" depends on OMAP2_DSS_DPI && I2C help - Driver for external monitors, connected via DVI. The driver uses i2c - to read EDID information from the monitor. + Driver for TFP410 DPI-to-DVI chip. The driver uses i2c to read EDID + information from the monitor. config PANEL_LGPHILIPS_LB035Q02 tristate "LG.Philips LB035Q02 LCD Panel" diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile index fbfafc6eebb4..58a5176b07b0 100644 --- a/drivers/video/omap2/displays/Makefile +++ b/drivers/video/omap2/displays/Makefile @@ -1,5 +1,5 @@ obj-$(CONFIG_PANEL_GENERIC_DPI) += panel-generic-dpi.o -obj-$(CONFIG_PANEL_DVI) += panel-dvi.o +obj-$(CONFIG_PANEL_TFP410) += panel-tfp410.o obj-$(CONFIG_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-nl8048hl11-01b.o diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c index 0f21fa5a16ae..b2dd88b48420 100644 --- a/drivers/video/omap2/displays/panel-taal.c +++ b/drivers/video/omap2/displays/panel-taal.c @@ -993,6 +993,15 @@ static int taal_probe(struct omap_dss_device *dssdev) dev_set_drvdata(&dssdev->dev, td); + if (gpio_is_valid(panel_data->reset_gpio)) { + r = gpio_request_one(panel_data->reset_gpio, GPIOF_OUT_INIT_LOW, + "taal rst"); + if (r) { + dev_err(&dssdev->dev, "failed to request reset gpio\n"); + goto err_rst_gpio; + } + } + taal_hw_reset(dssdev); if (panel_data->use_dsi_backlight) { @@ -1073,6 +1082,9 @@ err_gpio: if (bldev != NULL) backlight_device_unregister(bldev); err_bl: + if (gpio_is_valid(panel_data->reset_gpio)) + gpio_free(panel_data->reset_gpio); +err_rst_gpio: destroy_workqueue(td->workqueue); err_wq: free_regulators(panel_config->regulators, panel_config->num_regulators); @@ -1116,15 +1128,25 @@ static void __exit taal_remove(struct omap_dss_device *dssdev) free_regulators(td->panel_config->regulators, td->panel_config->num_regulators); + if (gpio_is_valid(panel_data->reset_gpio)) + gpio_free(panel_data->reset_gpio); + kfree(td); } static int taal_power_on(struct omap_dss_device *dssdev) { struct taal_data *td = dev_get_drvdata(&dssdev->dev); + struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev); u8 id1, id2, id3; int r; + r = omapdss_dsi_configure_pins(dssdev, &panel_data->pin_config); + if (r) { + dev_err(&dssdev->dev, "failed to configure DSI pins\n"); + goto err0; + }; + r = omapdss_dsi_display_enable(dssdev); if (r) { dev_err(&dssdev->dev, "failed to enable DSI\n"); diff --git a/drivers/video/omap2/displays/panel-dvi.c b/drivers/video/omap2/displays/panel-tfp410.c index 03eb14af33e0..52637fa8fda8 100644 --- a/drivers/video/omap2/displays/panel-dvi.c +++ b/drivers/video/omap2/displays/panel-tfp410.c @@ -1,5 +1,5 @@ /* - * DVI output support + * TFP410 DPI-to-DVI chip * * Copyright (C) 2011 Texas Instruments Inc * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> @@ -21,11 +21,12 @@ #include <linux/slab.h> #include <video/omapdss.h> #include <linux/i2c.h> +#include <linux/gpio.h> #include <drm/drm_edid.h> -#include <video/omap-panel-dvi.h> +#include <video/omap-panel-tfp410.h> -static const struct omap_video_timings panel_dvi_default_timings = { +static const struct omap_video_timings tfp410_default_timings = { .x_res = 640, .y_res = 480, @@ -44,17 +45,19 @@ struct panel_drv_data { struct omap_dss_device *dssdev; struct mutex lock; + + int pd_gpio; }; -static inline struct panel_dvi_platform_data +static inline struct tfp410_platform_data *get_pdata(const struct omap_dss_device *dssdev) { return dssdev->data; } -static int panel_dvi_power_on(struct omap_dss_device *dssdev) +static int tfp410_power_on(struct omap_dss_device *dssdev) { - struct panel_dvi_platform_data *pdata = get_pdata(dssdev); + struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev); int r; if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) @@ -64,57 +67,72 @@ static int panel_dvi_power_on(struct omap_dss_device *dssdev) if (r) goto err0; - if (pdata->platform_enable) { - r = pdata->platform_enable(dssdev); - if (r) - goto err1; - } + if (gpio_is_valid(ddata->pd_gpio)) + gpio_set_value(ddata->pd_gpio, 1); return 0; -err1: - omapdss_dpi_display_disable(dssdev); err0: return r; } -static void panel_dvi_power_off(struct omap_dss_device *dssdev) +static void tfp410_power_off(struct omap_dss_device *dssdev) { - struct panel_dvi_platform_data *pdata = get_pdata(dssdev); + struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev); if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) return; - if (pdata->platform_disable) - pdata->platform_disable(dssdev); + if (gpio_is_valid(ddata->pd_gpio)) + gpio_set_value(ddata->pd_gpio, 0); omapdss_dpi_display_disable(dssdev); } -static int panel_dvi_probe(struct omap_dss_device *dssdev) +static int tfp410_probe(struct omap_dss_device *dssdev) { + struct tfp410_platform_data *pdata = get_pdata(dssdev); struct panel_drv_data *ddata; + int r; ddata = kzalloc(sizeof(*ddata), GFP_KERNEL); if (!ddata) return -ENOMEM; - dssdev->panel.timings = panel_dvi_default_timings; + dssdev->panel.timings = tfp410_default_timings; dssdev->panel.config = OMAP_DSS_LCD_TFT; ddata->dssdev = dssdev; mutex_init(&ddata->lock); + if (pdata) + ddata->pd_gpio = pdata->power_down_gpio; + else + ddata->pd_gpio = -1; + + if (gpio_is_valid(ddata->pd_gpio)) { + r = gpio_request_one(ddata->pd_gpio, GPIOF_OUT_INIT_LOW, + "tfp410 pd"); + if (r) { + dev_err(&dssdev->dev, "Failed to request PD GPIO %d\n", + ddata->pd_gpio); + ddata->pd_gpio = -1; + } + } + dev_set_drvdata(&dssdev->dev, ddata); return 0; } -static void __exit panel_dvi_remove(struct omap_dss_device *dssdev) +static void __exit tfp410_remove(struct omap_dss_device *dssdev) { struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev); mutex_lock(&ddata->lock); + if (gpio_is_valid(ddata->pd_gpio)) + gpio_free(ddata->pd_gpio); + dev_set_drvdata(&dssdev->dev, NULL); mutex_unlock(&ddata->lock); @@ -122,14 +140,14 @@ static void __exit panel_dvi_remove(struct omap_dss_device *dssdev) kfree(ddata); } -static int panel_dvi_enable(struct omap_dss_device *dssdev) +static int tfp410_enable(struct omap_dss_device *dssdev) { struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev); int r; mutex_lock(&ddata->lock); - r = panel_dvi_power_on(dssdev); + r = tfp410_power_on(dssdev); if (r == 0) dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; @@ -138,26 +156,26 @@ static int panel_dvi_enable(struct omap_dss_device *dssdev) return r; } -static void panel_dvi_disable(struct omap_dss_device *dssdev) +static void tfp410_disable(struct omap_dss_device *dssdev) { struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev); mutex_lock(&ddata->lock); - panel_dvi_power_off(dssdev); + tfp410_power_off(dssdev); dssdev->state = OMAP_DSS_DISPLAY_DISABLED; mutex_unlock(&ddata->lock); } -static int panel_dvi_suspend(struct omap_dss_device *dssdev) +static int tfp410_suspend(struct omap_dss_device *dssdev) { struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev); mutex_lock(&ddata->lock); - panel_dvi_power_off(dssdev); + tfp410_power_off(dssdev); dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; @@ -166,14 +184,14 @@ static int panel_dvi_suspend(struct omap_dss_device *dssdev) return 0; } -static int panel_dvi_resume(struct omap_dss_device *dssdev) +static int tfp410_resume(struct omap_dss_device *dssdev) { struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev); int r; mutex_lock(&ddata->lock); - r = panel_dvi_power_on(dssdev); + r = tfp410_power_on(dssdev); if (r == 0) dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; @@ -182,7 +200,7 @@ static int panel_dvi_resume(struct omap_dss_device *dssdev) return r; } -static void panel_dvi_set_timings(struct omap_dss_device *dssdev, +static void tfp410_set_timings(struct omap_dss_device *dssdev, struct omap_video_timings *timings) { struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev); @@ -192,7 +210,7 @@ static void panel_dvi_set_timings(struct omap_dss_device *dssdev, mutex_unlock(&ddata->lock); } -static void panel_dvi_get_timings(struct omap_dss_device *dssdev, +static void tfp410_get_timings(struct omap_dss_device *dssdev, struct omap_video_timings *timings) { struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev); @@ -202,7 +220,7 @@ static void panel_dvi_get_timings(struct omap_dss_device *dssdev, mutex_unlock(&ddata->lock); } -static int panel_dvi_check_timings(struct omap_dss_device *dssdev, +static int tfp410_check_timings(struct omap_dss_device *dssdev, struct omap_video_timings *timings) { struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev); @@ -216,7 +234,7 @@ static int panel_dvi_check_timings(struct omap_dss_device *dssdev, } -static int panel_dvi_ddc_read(struct i2c_adapter *adapter, +static int tfp410_ddc_read(struct i2c_adapter *adapter, unsigned char *buf, u16 count, u8 offset) { int r, retries; @@ -247,11 +265,11 @@ static int panel_dvi_ddc_read(struct i2c_adapter *adapter, return r < 0 ? r : -EIO; } -static int panel_dvi_read_edid(struct omap_dss_device *dssdev, +static int tfp410_read_edid(struct omap_dss_device *dssdev, u8 *edid, int len) { struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev); - struct panel_dvi_platform_data *pdata = get_pdata(dssdev); + struct tfp410_platform_data *pdata = get_pdata(dssdev); struct i2c_adapter *adapter; int r, l, bytes_read; @@ -271,7 +289,7 @@ static int panel_dvi_read_edid(struct omap_dss_device *dssdev, } l = min(EDID_LENGTH, len); - r = panel_dvi_ddc_read(adapter, edid, l, 0); + r = tfp410_ddc_read(adapter, edid, l, 0); if (r) goto err; @@ -281,7 +299,7 @@ static int panel_dvi_read_edid(struct omap_dss_device *dssdev, if (len > EDID_LENGTH && edid[0x7e] > 0) { l = min(EDID_LENGTH, len - EDID_LENGTH); - r = panel_dvi_ddc_read(adapter, edid + EDID_LENGTH, + r = tfp410_ddc_read(adapter, edid + EDID_LENGTH, l, EDID_LENGTH); if (r) goto err; @@ -298,10 +316,10 @@ err: return r; } -static bool panel_dvi_detect(struct omap_dss_device *dssdev) +static bool tfp410_detect(struct omap_dss_device *dssdev) { struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev); - struct panel_dvi_platform_data *pdata = get_pdata(dssdev); + struct tfp410_platform_data *pdata = get_pdata(dssdev); struct i2c_adapter *adapter; unsigned char out; int r; @@ -315,7 +333,7 @@ static bool panel_dvi_detect(struct omap_dss_device *dssdev) if (!adapter) goto out; - r = panel_dvi_ddc_read(adapter, &out, 1, 0); + r = tfp410_ddc_read(adapter, &out, 1, 0); mutex_unlock(&ddata->lock); @@ -326,38 +344,38 @@ out: return true; } -static struct omap_dss_driver panel_dvi_driver = { - .probe = panel_dvi_probe, - .remove = __exit_p(panel_dvi_remove), +static struct omap_dss_driver tfp410_driver = { + .probe = tfp410_probe, + .remove = __exit_p(tfp410_remove), - .enable = panel_dvi_enable, - .disable = panel_dvi_disable, - .suspend = panel_dvi_suspend, - .resume = panel_dvi_resume, + .enable = tfp410_enable, + .disable = tfp410_disable, + .suspend = tfp410_suspend, + .resume = tfp410_resume, - .set_timings = panel_dvi_set_timings, - .get_timings = panel_dvi_get_timings, - .check_timings = panel_dvi_check_timings, + .set_timings = tfp410_set_timings, + .get_timings = tfp410_get_timings, + .check_timings = tfp410_check_timings, - .read_edid = panel_dvi_read_edid, - .detect = panel_dvi_detect, + .read_edid = tfp410_read_edid, + .detect = tfp410_detect, .driver = { - .name = "dvi", + .name = "tfp410", .owner = THIS_MODULE, }, }; -static int __init panel_dvi_init(void) +static int __init tfp410_init(void) { - return omap_dss_register_driver(&panel_dvi_driver); + return omap_dss_register_driver(&tfp410_driver); } -static void __exit panel_dvi_exit(void) +static void __exit tfp410_exit(void) { - omap_dss_unregister_driver(&panel_dvi_driver); + omap_dss_unregister_driver(&tfp410_driver); } -module_init(panel_dvi_init); -module_exit(panel_dvi_exit); +module_init(tfp410_init); +module_exit(tfp410_exit); MODULE_LICENSE("GPL"); diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 662d14f8c2c3..210a3c4f6150 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -2076,65 +2076,6 @@ static unsigned dsi_get_line_buf_size(struct platform_device *dsidev) } } -static int dsi_parse_lane_config(struct omap_dss_device *dssdev) -{ - struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); - struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); - u8 lanes[DSI_MAX_NR_LANES]; - u8 polarities[DSI_MAX_NR_LANES]; - int num_lanes, i; - - static const enum dsi_lane_function functions[] = { - DSI_LANE_CLK, - DSI_LANE_DATA1, - DSI_LANE_DATA2, - DSI_LANE_DATA3, - DSI_LANE_DATA4, - }; - - lanes[0] = dssdev->phy.dsi.clk_lane; - lanes[1] = dssdev->phy.dsi.data1_lane; - lanes[2] = dssdev->phy.dsi.data2_lane; - lanes[3] = dssdev->phy.dsi.data3_lane; - lanes[4] = dssdev->phy.dsi.data4_lane; - polarities[0] = dssdev->phy.dsi.clk_pol; - polarities[1] = dssdev->phy.dsi.data1_pol; - polarities[2] = dssdev->phy.dsi.data2_pol; - polarities[3] = dssdev->phy.dsi.data3_pol; - polarities[4] = dssdev->phy.dsi.data4_pol; - - num_lanes = 0; - - for (i = 0; i < dsi->num_lanes_supported; ++i) - dsi->lanes[i].function = DSI_LANE_UNUSED; - - for (i = 0; i < dsi->num_lanes_supported; ++i) { - int num; - - if (lanes[i] == DSI_LANE_UNUSED) - break; - - num = lanes[i] - 1; - - if (num >= dsi->num_lanes_supported) - return -EINVAL; - - if (dsi->lanes[num].function != DSI_LANE_UNUSED) - return -EINVAL; - - dsi->lanes[num].function = functions[i]; - dsi->lanes[num].polarity = polarities[i]; - num_lanes++; - } - - if (num_lanes < 2 || num_lanes > dsi->num_lanes_supported) - return -EINVAL; - - dsi->num_lanes_used = num_lanes; - - return 0; -} - static int dsi_set_lane_config(struct omap_dss_device *dssdev) { struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); @@ -3975,6 +3916,74 @@ static void dsi_proto_timings(struct omap_dss_device *dssdev) } } +int omapdss_dsi_configure_pins(struct omap_dss_device *dssdev, + const struct omap_dsi_pin_config *pin_cfg) +{ + struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); + struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); + int num_pins; + const int *pins; + struct dsi_lane_config lanes[DSI_MAX_NR_LANES]; + int num_lanes; + int i; + + static const enum dsi_lane_function functions[] = { + DSI_LANE_CLK, + DSI_LANE_DATA1, + DSI_LANE_DATA2, + DSI_LANE_DATA3, + DSI_LANE_DATA4, + }; + + num_pins = pin_cfg->num_pins; + pins = pin_cfg->pins; + + if (num_pins < 4 || num_pins > dsi->num_lanes_supported * 2 + || num_pins % 2 != 0) + return -EINVAL; + + for (i = 0; i < DSI_MAX_NR_LANES; ++i) + lanes[i].function = DSI_LANE_UNUSED; + + num_lanes = 0; + + for (i = 0; i < num_pins; i += 2) { + u8 lane, pol; + int dx, dy; + + dx = pins[i]; + dy = pins[i + 1]; + + if (dx < 0 || dx >= dsi->num_lanes_supported * 2) + return -EINVAL; + + if (dy < 0 || dy >= dsi->num_lanes_supported * 2) + return -EINVAL; + + if (dx & 1) { + if (dy != dx - 1) + return -EINVAL; + pol = 1; + } else { + if (dy != dx + 1) + return -EINVAL; + pol = 0; + } + + lane = dx / 2; + + lanes[lane].function = functions[i / 2]; + lanes[lane].polarity = pol; + num_lanes++; + } + + memcpy(dsi->lanes, lanes, sizeof(dsi->lanes)); + dsi->num_lanes_used = num_lanes; + + return 0; +} +EXPORT_SYMBOL(omapdss_dsi_configure_pins); + int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel) { struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); @@ -4339,12 +4348,6 @@ static int dsi_display_init_dsi(struct omap_dss_device *dssdev) int dsi_module = dsi_get_dsidev_id(dsidev); int r; - r = dsi_parse_lane_config(dssdev); - if (r) { - DSSERR("illegal lane config"); - goto err0; - } - r = dsi_pll_init(dsidev, true, true); if (r) goto err0; diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index e801f226d7e0..4106264fbc65 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -220,10 +220,12 @@ struct extent_buffer *btrfs_read_lock_root_node(struct btrfs_root *root) */ static void add_root_to_dirty_list(struct btrfs_root *root) { + spin_lock(&root->fs_info->trans_lock); if (root->track_dirty && list_empty(&root->dirty_list)) { list_add(&root->dirty_list, &root->fs_info->dirty_cowonly_roots); } + spin_unlock(&root->fs_info->trans_lock); } /* @@ -723,7 +725,7 @@ int btrfs_realloc_node(struct btrfs_trans_handle *trans, cur = btrfs_find_tree_block(root, blocknr, blocksize); if (cur) - uptodate = btrfs_buffer_uptodate(cur, gen); + uptodate = btrfs_buffer_uptodate(cur, gen, 0); else uptodate = 0; if (!cur || !uptodate) { @@ -1358,7 +1360,12 @@ static noinline int reada_for_balance(struct btrfs_root *root, block1 = btrfs_node_blockptr(parent, slot - 1); gen = btrfs_node_ptr_generation(parent, slot - 1); eb = btrfs_find_tree_block(root, block1, blocksize); - if (eb && btrfs_buffer_uptodate(eb, gen)) + /* + * if we get -eagain from btrfs_buffer_uptodate, we + * don't want to return eagain here. That will loop + * forever + */ + if (eb && btrfs_buffer_uptodate(eb, gen, 1) != 0) block1 = 0; free_extent_buffer(eb); } @@ -1366,7 +1373,7 @@ static noinline int reada_for_balance(struct btrfs_root *root, block2 = btrfs_node_blockptr(parent, slot + 1); gen = btrfs_node_ptr_generation(parent, slot + 1); eb = btrfs_find_tree_block(root, block2, blocksize); - if (eb && btrfs_buffer_uptodate(eb, gen)) + if (eb && btrfs_buffer_uptodate(eb, gen, 1) != 0) block2 = 0; free_extent_buffer(eb); } @@ -1504,8 +1511,9 @@ read_block_for_search(struct btrfs_trans_handle *trans, tmp = btrfs_find_tree_block(root, blocknr, blocksize); if (tmp) { - if (btrfs_buffer_uptodate(tmp, 0)) { - if (btrfs_buffer_uptodate(tmp, gen)) { + /* first we do an atomic uptodate check */ + if (btrfs_buffer_uptodate(tmp, 0, 1) > 0) { + if (btrfs_buffer_uptodate(tmp, gen, 1) > 0) { /* * we found an up to date block without * sleeping, return @@ -1523,8 +1531,9 @@ read_block_for_search(struct btrfs_trans_handle *trans, free_extent_buffer(tmp); btrfs_set_path_blocking(p); + /* now we're allowed to do a blocking uptodate check */ tmp = read_tree_block(root, blocknr, blocksize, gen); - if (tmp && btrfs_buffer_uptodate(tmp, gen)) { + if (tmp && btrfs_buffer_uptodate(tmp, gen, 0) > 0) { *eb_ret = tmp; return 0; } @@ -1559,7 +1568,7 @@ read_block_for_search(struct btrfs_trans_handle *trans, * and give up so that our caller doesn't loop forever * on our EAGAINs. */ - if (!btrfs_buffer_uptodate(tmp, 0)) + if (!btrfs_buffer_uptodate(tmp, 0, 0)) ret = -EIO; free_extent_buffer(tmp); } @@ -4043,7 +4052,7 @@ again: tmp = btrfs_find_tree_block(root, blockptr, btrfs_level_size(root, level - 1)); - if (tmp && btrfs_buffer_uptodate(tmp, gen)) { + if (tmp && btrfs_buffer_uptodate(tmp, gen, 1) > 0) { free_extent_buffer(tmp); break; } @@ -4166,7 +4175,8 @@ next: struct extent_buffer *cur; cur = btrfs_find_tree_block(root, blockptr, btrfs_level_size(root, level - 1)); - if (!cur || !btrfs_buffer_uptodate(cur, gen)) { + if (!cur || + btrfs_buffer_uptodate(cur, gen, 1) <= 0) { slot++; if (cur) free_extent_buffer(cur); diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index d0c969beaad4..a7ffc88a7dbe 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -323,7 +323,8 @@ static int csum_tree_block(struct btrfs_root *root, struct extent_buffer *buf, * in the wrong place. */ static int verify_parent_transid(struct extent_io_tree *io_tree, - struct extent_buffer *eb, u64 parent_transid) + struct extent_buffer *eb, u64 parent_transid, + int atomic) { struct extent_state *cached_state = NULL; int ret; @@ -331,6 +332,9 @@ static int verify_parent_transid(struct extent_io_tree *io_tree, if (!parent_transid || btrfs_header_generation(eb) == parent_transid) return 0; + if (atomic) + return -EAGAIN; + lock_extent_bits(io_tree, eb->start, eb->start + eb->len - 1, 0, &cached_state); if (extent_buffer_uptodate(eb) && @@ -372,7 +376,8 @@ static int btree_read_extent_buffer_pages(struct btrfs_root *root, ret = read_extent_buffer_pages(io_tree, eb, start, WAIT_COMPLETE, btree_get_extent, mirror_num); - if (!ret && !verify_parent_transid(io_tree, eb, parent_transid)) + if (!ret && !verify_parent_transid(io_tree, eb, + parent_transid, 0)) break; /* @@ -1202,7 +1207,7 @@ static int __must_check find_and_setup_root(struct btrfs_root *tree_root, root->commit_root = NULL; root->node = read_tree_block(root, btrfs_root_bytenr(&root->root_item), blocksize, generation); - if (!root->node || !btrfs_buffer_uptodate(root->node, generation)) { + if (!root->node || !btrfs_buffer_uptodate(root->node, generation, 0)) { free_extent_buffer(root->node); root->node = NULL; return -EIO; @@ -3143,7 +3148,8 @@ int close_ctree(struct btrfs_root *root) return 0; } -int btrfs_buffer_uptodate(struct extent_buffer *buf, u64 parent_transid) +int btrfs_buffer_uptodate(struct extent_buffer *buf, u64 parent_transid, + int atomic) { int ret; struct inode *btree_inode = buf->pages[0]->mapping->host; @@ -3153,7 +3159,9 @@ int btrfs_buffer_uptodate(struct extent_buffer *buf, u64 parent_transid) return ret; ret = verify_parent_transid(&BTRFS_I(btree_inode)->io_tree, buf, - parent_transid); + parent_transid, atomic); + if (ret == -EAGAIN) + return ret; return !ret; } diff --git a/fs/btrfs/disk-io.h b/fs/btrfs/disk-io.h index a7ace1a2dd12..ab1830aaf0ed 100644 --- a/fs/btrfs/disk-io.h +++ b/fs/btrfs/disk-io.h @@ -66,7 +66,8 @@ void btrfs_btree_balance_dirty(struct btrfs_root *root, unsigned long nr); void __btrfs_btree_balance_dirty(struct btrfs_root *root, unsigned long nr); void btrfs_free_fs_root(struct btrfs_fs_info *fs_info, struct btrfs_root *root); void btrfs_mark_buffer_dirty(struct extent_buffer *buf); -int btrfs_buffer_uptodate(struct extent_buffer *buf, u64 parent_transid); +int btrfs_buffer_uptodate(struct extent_buffer *buf, u64 parent_transid, + int atomic); int btrfs_set_buffer_uptodate(struct extent_buffer *buf); int btrfs_read_buffer(struct extent_buffer *buf, u64 parent_transid); u32 btrfs_csum_data(struct btrfs_root *root, char *data, u32 seed, size_t len); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 6fc2e6f5aab8..49fd7b66d57b 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -6568,7 +6568,7 @@ static noinline int do_walk_down(struct btrfs_trans_handle *trans, goto skip; } - if (!btrfs_buffer_uptodate(next, generation)) { + if (!btrfs_buffer_uptodate(next, generation, 0)) { btrfs_tree_unlock(next); free_extent_buffer(next); next = NULL; diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 198c2ba2fa40..c9018a05036e 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -4120,6 +4120,7 @@ struct extent_buffer *alloc_extent_buffer(struct extent_io_tree *tree, if (atomic_inc_not_zero(&exists->refs)) { spin_unlock(&mapping->private_lock); unlock_page(p); + page_cache_release(p); mark_extent_buffer_accessed(exists); goto free_eb; } @@ -4199,8 +4200,7 @@ free_eb: unlock_page(eb->pages[i]); } - if (!atomic_dec_and_test(&eb->refs)) - return exists; + WARN_ON(!atomic_dec_and_test(&eb->refs)); btrfs_release_extent_buffer(eb); return exists; } diff --git a/fs/btrfs/ioctl.h b/fs/btrfs/ioctl.h index 4f69028a68c4..086e6bdae1c4 100644 --- a/fs/btrfs/ioctl.h +++ b/fs/btrfs/ioctl.h @@ -252,7 +252,7 @@ struct btrfs_data_container { struct btrfs_ioctl_ino_path_args { __u64 inum; /* in */ - __u32 size; /* in */ + __u64 size; /* in */ __u64 reserved[4]; /* struct btrfs_data_container *fspath; out */ __u64 fspath; /* out */ @@ -260,7 +260,7 @@ struct btrfs_ioctl_ino_path_args { struct btrfs_ioctl_logical_ino_args { __u64 logical; /* in */ - __u32 size; /* in */ + __u64 size; /* in */ __u64 reserved[4]; /* struct btrfs_data_container *inodes; out */ __u64 inodes; diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index 4f76fc3f8e89..2f3d6f917fb3 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -998,6 +998,7 @@ static int scrub_setup_recheck_block(struct scrub_dev *sdev, page = sblock->pagev + page_index; page->logical = logical; page->physical = bbio->stripes[mirror_index].physical; + /* for missing devices, bdev is NULL */ page->bdev = bbio->stripes[mirror_index].dev->bdev; page->mirror_num = mirror_index + 1; page->page = alloc_page(GFP_NOFS); @@ -1042,6 +1043,12 @@ static int scrub_recheck_block(struct btrfs_fs_info *fs_info, struct scrub_page *page = sblock->pagev + page_num; DECLARE_COMPLETION_ONSTACK(complete); + if (page->bdev == NULL) { + page->io_error = 1; + sblock->no_io_error_seen = 0; + continue; + } + BUG_ON(!page->page); bio = bio_alloc(GFP_NOFS, 1); if (!bio) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index d017283ae6f5..eb1ae908582c 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -279,7 +279,7 @@ static int process_one_buffer(struct btrfs_root *log, log->fs_info->extent_root, eb->start, eb->len); - if (btrfs_buffer_uptodate(eb, gen)) { + if (btrfs_buffer_uptodate(eb, gen, 0)) { if (wc->write) btrfs_write_tree_block(eb); if (wc->wait) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 811245b1ff2e..ca6a3796a33b 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -442,7 +442,7 @@ cifs_show_options(struct seq_file *s, struct dentry *root) seq_printf(s, ",rsize=%u", cifs_sb->rsize); seq_printf(s, ",wsize=%u", cifs_sb->wsize); /* convert actimeo and display it in seconds */ - seq_printf(s, ",actimeo=%lu", cifs_sb->actimeo / HZ); + seq_printf(s, ",actimeo=%lu", cifs_sb->actimeo / HZ); return 0; } diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h index d1389bb33ceb..65365358c976 100644 --- a/fs/cifs/cifsfs.h +++ b/fs/cifs/cifsfs.h @@ -125,5 +125,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg); extern const struct export_operations cifs_export_ops; #endif /* CONFIG_CIFS_NFSD_EXPORT */ -#define CIFS_VERSION "1.77" +#define CIFS_VERSION "1.78" #endif /* _CIFSFS_H */ diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index f52c5ab78f9d..da2f5446fa7a 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -4844,8 +4844,12 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr, max_len = data_end - temp; node->node_name = cifs_strndup_from_utf16(temp, max_len, is_unicode, nls_codepage); - if (!node->node_name) + if (!node->node_name) { rc = -ENOMEM; + goto parse_DFS_referrals_exit; + } + + ref++; } parse_DFS_referrals_exit: diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index f4d381e331ce..5dcc55197fb3 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -215,6 +215,8 @@ static const match_table_t cifs_mount_option_tokens = { { Opt_ignore, "cred" }, { Opt_ignore, "credentials" }, + { Opt_ignore, "cred=%s" }, + { Opt_ignore, "credentials=%s" }, { Opt_ignore, "guest" }, { Opt_ignore, "rw" }, { Opt_ignore, "ro" }, @@ -2183,6 +2185,7 @@ cifs_get_tcp_session(struct smb_vol *volume_info) tcp_ses->session_estab = false; tcp_ses->sequence_number = 0; tcp_ses->lstrp = jiffies; + spin_lock_init(&tcp_ses->req_lock); INIT_LIST_HEAD(&tcp_ses->tcp_ses_list); INIT_LIST_HEAD(&tcp_ses->smb_ses_list); INIT_DELAYED_WORK(&tcp_ses->echo, cifs_echo_request); @@ -3614,22 +3617,6 @@ cifs_get_volume_info(char *mount_data, const char *devname) return volume_info; } -/* make sure ra_pages is a multiple of rsize */ -static inline unsigned int -cifs_ra_pages(struct cifs_sb_info *cifs_sb) -{ - unsigned int reads; - unsigned int rsize_pages = cifs_sb->rsize / PAGE_CACHE_SIZE; - - if (rsize_pages >= default_backing_dev_info.ra_pages) - return default_backing_dev_info.ra_pages; - else if (rsize_pages == 0) - return rsize_pages; - - reads = default_backing_dev_info.ra_pages / rsize_pages; - return reads * rsize_pages; -} - int cifs_mount(struct cifs_sb_info *cifs_sb, struct smb_vol *volume_info) { @@ -3717,7 +3704,7 @@ try_mount_again: cifs_sb->rsize = cifs_negotiate_rsize(tcon, volume_info); /* tune readahead according to rsize */ - cifs_sb->bdi.ra_pages = cifs_ra_pages(cifs_sb); + cifs_sb->bdi.ra_pages = cifs_sb->rsize / PAGE_CACHE_SIZE; remote_path_check: #ifdef CONFIG_CIFS_DFS_UPCALL diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index d172c8ed9017..ec4e9a2a12f8 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -668,12 +668,19 @@ cifs_d_revalidate(struct dentry *direntry, struct nameidata *nd) return 0; else { /* - * Forcibly invalidate automounting directory inodes - * (remote DFS directories) so to have them - * instantiated again for automount + * If the inode wasn't known to be a dfs entry when + * the dentry was instantiated, such as when created + * via ->readdir(), it needs to be set now since the + * attributes will have been updated by + * cifs_revalidate_dentry(). */ - if (IS_AUTOMOUNT(direntry->d_inode)) - return 0; + if (IS_AUTOMOUNT(direntry->d_inode) && + !(direntry->d_flags & DCACHE_NEED_AUTOMOUNT)) { + spin_lock(&direntry->d_lock); + direntry->d_flags |= DCACHE_NEED_AUTOMOUNT; + spin_unlock(&direntry->d_lock); + } + return 1; } } diff --git a/fs/dcache.c b/fs/dcache.c index b60ddc41d783..b80531c91779 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -141,18 +141,29 @@ int proc_nr_dentry(ctl_table *table, int write, void __user *buffer, * Compare 2 name strings, return 0 if they match, otherwise non-zero. * The strings are both count bytes long, and count is non-zero. */ +#ifdef CONFIG_DCACHE_WORD_ACCESS + +#include <asm/word-at-a-time.h> +/* + * NOTE! 'cs' and 'scount' come from a dentry, so it has a + * aligned allocation for this particular component. We don't + * strictly need the load_unaligned_zeropad() safety, but it + * doesn't hurt either. + * + * In contrast, 'ct' and 'tcount' can be from a pathname, and do + * need the careful unaligned handling. + */ static inline int dentry_cmp(const unsigned char *cs, size_t scount, const unsigned char *ct, size_t tcount) { -#ifdef CONFIG_DCACHE_WORD_ACCESS unsigned long a,b,mask; if (unlikely(scount != tcount)) return 1; for (;;) { - a = *(unsigned long *)cs; - b = *(unsigned long *)ct; + a = load_unaligned_zeropad(cs); + b = load_unaligned_zeropad(ct); if (tcount < sizeof(unsigned long)) break; if (unlikely(a != b)) @@ -165,7 +176,13 @@ static inline int dentry_cmp(const unsigned char *cs, size_t scount, } mask = ~(~0ul << tcount*8); return unlikely(!!((a ^ b) & mask)); +} + #else + +static inline int dentry_cmp(const unsigned char *cs, size_t scount, + const unsigned char *ct, size_t tcount) +{ if (scount != tcount) return 1; @@ -177,9 +194,10 @@ static inline int dentry_cmp(const unsigned char *cs, size_t scount, tcount--; } while (tcount); return 0; -#endif } +#endif + static void __d_free(struct rcu_head *head) { struct dentry *dentry = container_of(head, struct dentry, d_u.d_rcu); diff --git a/fs/hfsplus/catalog.c b/fs/hfsplus/catalog.c index 4dfbfec357e8..ec2a9c23f0c9 100644 --- a/fs/hfsplus/catalog.c +++ b/fs/hfsplus/catalog.c @@ -366,6 +366,10 @@ int hfsplus_rename_cat(u32 cnid, err = hfs_brec_find(&src_fd); if (err) goto out; + if (src_fd.entrylength > sizeof(entry) || src_fd.entrylength < 0) { + err = -EIO; + goto out; + } hfs_bnode_read(src_fd.bnode, &entry, src_fd.entryoffset, src_fd.entrylength); diff --git a/fs/hfsplus/dir.c b/fs/hfsplus/dir.c index 88e155f895c6..26b53fb09f68 100644 --- a/fs/hfsplus/dir.c +++ b/fs/hfsplus/dir.c @@ -150,6 +150,11 @@ static int hfsplus_readdir(struct file *filp, void *dirent, filldir_t filldir) filp->f_pos++; /* fall through */ case 1: + if (fd.entrylength > sizeof(entry) || fd.entrylength < 0) { + err = -EIO; + goto out; + } + hfs_bnode_read(fd.bnode, &entry, fd.entryoffset, fd.entrylength); if (be16_to_cpu(entry.type) != HFSPLUS_FOLDER_THREAD) { @@ -181,6 +186,12 @@ static int hfsplus_readdir(struct file *filp, void *dirent, filldir_t filldir) err = -EIO; goto out; } + + if (fd.entrylength > sizeof(entry) || fd.entrylength < 0) { + err = -EIO; + goto out; + } + hfs_bnode_read(fd.bnode, &entry, fd.entryoffset, fd.entrylength); type = be16_to_cpu(entry.type); diff --git a/fs/namei.c b/fs/namei.c index 0062dd17eb55..c42791914f82 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1429,7 +1429,7 @@ unsigned int full_name_hash(const unsigned char *name, unsigned int len) unsigned long hash = 0; for (;;) { - a = *(unsigned long *)name; + a = load_unaligned_zeropad(name); if (len < sizeof(unsigned long)) break; hash += a; @@ -1459,7 +1459,7 @@ static inline unsigned long hash_name(const char *name, unsigned int *hashp) do { hash = (hash + a) * 9; len += sizeof(unsigned long); - a = *(unsigned long *)(name+len); + a = load_unaligned_zeropad(name+len); /* Do we have any NUL or '/' bytes in this word? */ mask = has_zero(a) | has_zero(a ^ REPEAT_BYTE('/')); } while (!mask); diff --git a/fs/nfs/blocklayout/blocklayout.c b/fs/nfs/blocklayout/blocklayout.c index 9c94297bb70e..7f6a23f0244e 100644 --- a/fs/nfs/blocklayout/blocklayout.c +++ b/fs/nfs/blocklayout/blocklayout.c @@ -38,6 +38,8 @@ #include <linux/buffer_head.h> /* various write calls */ #include <linux/prefetch.h> +#include "../pnfs.h" +#include "../internal.h" #include "blocklayout.h" #define NFSDBG_FACILITY NFSDBG_PNFS_LD @@ -868,7 +870,7 @@ nfs4_blk_get_deviceinfo(struct nfs_server *server, const struct nfs_fh *fh, * GETDEVICEINFO's maxcount */ max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz; - max_pages = max_resp_sz >> PAGE_SHIFT; + max_pages = nfs_page_array_len(0, max_resp_sz); dprintk("%s max_resp_sz %u max_pages %d\n", __func__, max_resp_sz, max_pages); diff --git a/fs/nfs/client.c b/fs/nfs/client.c index da7b5e4ff9ec..60f7e4ec842c 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -1729,7 +1729,8 @@ error: */ struct nfs_server *nfs_clone_server(struct nfs_server *source, struct nfs_fh *fh, - struct nfs_fattr *fattr) + struct nfs_fattr *fattr, + rpc_authflavor_t flavor) { struct nfs_server *server; struct nfs_fattr *fattr_fsinfo; @@ -1758,7 +1759,7 @@ struct nfs_server *nfs_clone_server(struct nfs_server *source, error = nfs_init_server_rpcclient(server, source->client->cl_timeout, - source->client->cl_auth->au_flavor); + flavor); if (error < 0) goto out_free_server; if (!IS_ERR(source->client_acl)) diff --git a/fs/nfs/idmap.c b/fs/nfs/idmap.c index b7f348bb618b..ba3019f5934c 100644 --- a/fs/nfs/idmap.c +++ b/fs/nfs/idmap.c @@ -554,12 +554,16 @@ static int rpc_pipefs_event(struct notifier_block *nb, unsigned long event, struct nfs_client *clp; int error = 0; + if (!try_module_get(THIS_MODULE)) + return 0; + while ((clp = nfs_get_client_for_event(sb->s_fs_info, event))) { error = __rpc_pipefs_event(clp, event, sb); nfs_put_client(clp); if (error) break; } + module_put(THIS_MODULE); return error; } diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index 2476dc69365f..b777bdaba4c5 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -165,7 +165,8 @@ extern struct nfs_server *nfs4_create_referral_server(struct nfs_clone_mount *, extern void nfs_free_server(struct nfs_server *server); extern struct nfs_server *nfs_clone_server(struct nfs_server *, struct nfs_fh *, - struct nfs_fattr *); + struct nfs_fattr *, + rpc_authflavor_t); extern void nfs_mark_client_ready(struct nfs_client *clp, int state); extern int nfs4_check_client_ready(struct nfs_client *clp); extern struct nfs_client *nfs4_set_ds_client(struct nfs_client* mds_clp, @@ -186,10 +187,10 @@ static inline void nfs_fs_proc_exit(void) /* nfs4namespace.c */ #ifdef CONFIG_NFS_V4 -extern struct vfsmount *nfs_do_refmount(struct dentry *dentry); +extern struct vfsmount *nfs_do_refmount(struct rpc_clnt *client, struct dentry *dentry); #else static inline -struct vfsmount *nfs_do_refmount(struct dentry *dentry) +struct vfsmount *nfs_do_refmount(struct rpc_clnt *client, struct dentry *dentry) { return ERR_PTR(-ENOENT); } @@ -234,7 +235,6 @@ extern const u32 nfs41_maxwrite_overhead; /* nfs4proc.c */ #ifdef CONFIG_NFS_V4 extern struct rpc_procinfo nfs4_procedures[]; -void nfs_fixup_secinfo_attributes(struct nfs_fattr *, struct nfs_fh *); #endif extern int nfs4_init_ds_session(struct nfs_client *clp); diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c index 1807866bb3ab..d51868e5683c 100644 --- a/fs/nfs/namespace.c +++ b/fs/nfs/namespace.c @@ -148,66 +148,31 @@ rpc_authflavor_t nfs_find_best_sec(struct nfs4_secinfo_flavors *flavors) return pseudoflavor; } -static int nfs_negotiate_security(const struct dentry *parent, - const struct dentry *dentry, - rpc_authflavor_t *flavor) +static struct rpc_clnt *nfs_lookup_mountpoint(struct inode *dir, + struct qstr *name, + struct nfs_fh *fh, + struct nfs_fattr *fattr) { - struct page *page; - struct nfs4_secinfo_flavors *flavors; - int (*secinfo)(struct inode *, const struct qstr *, struct nfs4_secinfo_flavors *); - int ret = -EPERM; - - secinfo = NFS_PROTO(parent->d_inode)->secinfo; - if (secinfo != NULL) { - page = alloc_page(GFP_KERNEL); - if (!page) { - ret = -ENOMEM; - goto out; - } - flavors = page_address(page); - ret = secinfo(parent->d_inode, &dentry->d_name, flavors); - *flavor = nfs_find_best_sec(flavors); - put_page(page); - } - -out: - return ret; -} - -static int nfs_lookup_with_sec(struct nfs_server *server, struct dentry *parent, - struct dentry *dentry, struct path *path, - struct nfs_fh *fh, struct nfs_fattr *fattr, - rpc_authflavor_t *flavor) -{ - struct rpc_clnt *clone; - struct rpc_auth *auth; int err; - err = nfs_negotiate_security(parent, path->dentry, flavor); - if (err < 0) - goto out; - clone = rpc_clone_client(server->client); - auth = rpcauth_create(*flavor, clone); - if (!auth) { - err = -EIO; - goto out_shutdown; - } - err = server->nfs_client->rpc_ops->lookup(clone, parent->d_inode, - &path->dentry->d_name, - fh, fattr); -out_shutdown: - rpc_shutdown_client(clone); -out: - return err; + if (NFS_PROTO(dir)->version == 4) + return nfs4_proc_lookup_mountpoint(dir, name, fh, fattr); + + err = NFS_PROTO(dir)->lookup(NFS_SERVER(dir)->client, dir, name, fh, fattr); + if (err) + return ERR_PTR(err); + return rpc_clone_client(NFS_SERVER(dir)->client); } #else /* CONFIG_NFS_V4 */ -static inline int nfs_lookup_with_sec(struct nfs_server *server, - struct dentry *parent, struct dentry *dentry, - struct path *path, struct nfs_fh *fh, - struct nfs_fattr *fattr, - rpc_authflavor_t *flavor) +static inline struct rpc_clnt *nfs_lookup_mountpoint(struct inode *dir, + struct qstr *name, + struct nfs_fh *fh, + struct nfs_fattr *fattr) { - return -EPERM; + int err = NFS_PROTO(dir)->lookup(NFS_SERVER(dir)->client, dir, name, fh, fattr); + if (err) + return ERR_PTR(err); + return rpc_clone_client(NFS_SERVER(dir)->client); } #endif /* CONFIG_NFS_V4 */ @@ -226,12 +191,10 @@ static inline int nfs_lookup_with_sec(struct nfs_server *server, struct vfsmount *nfs_d_automount(struct path *path) { struct vfsmount *mnt; - struct nfs_server *server = NFS_SERVER(path->dentry->d_inode); struct dentry *parent; struct nfs_fh *fh = NULL; struct nfs_fattr *fattr = NULL; - int err; - rpc_authflavor_t flavor = RPC_AUTH_UNIX; + struct rpc_clnt *client; dprintk("--> nfs_d_automount()\n"); @@ -249,21 +212,19 @@ struct vfsmount *nfs_d_automount(struct path *path) /* Look it up again to get its attributes */ parent = dget_parent(path->dentry); - err = server->nfs_client->rpc_ops->lookup(server->client, parent->d_inode, - &path->dentry->d_name, - fh, fattr); - if (err == -EPERM && NFS_PROTO(parent->d_inode)->secinfo != NULL) - err = nfs_lookup_with_sec(server, parent, path->dentry, path, fh, fattr, &flavor); + client = nfs_lookup_mountpoint(parent->d_inode, &path->dentry->d_name, fh, fattr); dput(parent); - if (err != 0) { - mnt = ERR_PTR(err); + if (IS_ERR(client)) { + mnt = ERR_CAST(client); goto out; } if (fattr->valid & NFS_ATTR_FATTR_V4_REFERRAL) - mnt = nfs_do_refmount(path->dentry); + mnt = nfs_do_refmount(client, path->dentry); else - mnt = nfs_do_submount(path->dentry, fh, fattr, flavor); + mnt = nfs_do_submount(path->dentry, fh, fattr, client->cl_auth->au_flavor); + rpc_shutdown_client(client); + if (IS_ERR(mnt)) goto out; diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index b6db9e33fb7b..8d75021020b3 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -205,6 +205,9 @@ struct nfs4_state_maintenance_ops { extern const struct dentry_operations nfs4_dentry_operations; extern const struct inode_operations nfs4_dir_inode_operations; +/* nfs4namespace.c */ +struct rpc_clnt *nfs4_create_sec_client(struct rpc_clnt *, struct inode *, struct qstr *); + /* nfs4proc.c */ extern int nfs4_proc_setclientid(struct nfs_client *, u32, unsigned short, struct rpc_cred *, struct nfs4_setclientid_res *); extern int nfs4_proc_setclientid_confirm(struct nfs_client *, struct nfs4_setclientid_res *arg, struct rpc_cred *); @@ -213,8 +216,11 @@ extern int nfs4_init_clientid(struct nfs_client *, struct rpc_cred *); extern int nfs41_init_clientid(struct nfs_client *, struct rpc_cred *); extern int nfs4_do_close(struct nfs4_state *state, gfp_t gfp_mask, int wait, bool roc); extern int nfs4_server_capabilities(struct nfs_server *server, struct nfs_fh *fhandle); -extern int nfs4_proc_fs_locations(struct inode *dir, const struct qstr *name, - struct nfs4_fs_locations *fs_locations, struct page *page); +extern int nfs4_proc_fs_locations(struct rpc_clnt *, struct inode *, const struct qstr *, + struct nfs4_fs_locations *, struct page *); +extern struct rpc_clnt *nfs4_proc_lookup_mountpoint(struct inode *, struct qstr *, + struct nfs_fh *, struct nfs_fattr *); +extern int nfs4_proc_secinfo(struct inode *, const struct qstr *, struct nfs4_secinfo_flavors *); extern int nfs4_release_lockowner(struct nfs4_lock_state *); extern const struct xattr_handler *nfs4_xattr_handlers[]; diff --git a/fs/nfs/nfs4filelayoutdev.c b/fs/nfs/nfs4filelayoutdev.c index a866bbd2890a..c9cff9adb2d3 100644 --- a/fs/nfs/nfs4filelayoutdev.c +++ b/fs/nfs/nfs4filelayoutdev.c @@ -699,7 +699,7 @@ get_device_info(struct inode *inode, struct nfs4_deviceid *dev_id, gfp_t gfp_fla * GETDEVICEINFO's maxcount */ max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz; - max_pages = max_resp_sz >> PAGE_SHIFT; + max_pages = nfs_page_array_len(0, max_resp_sz); dprintk("%s inode %p max_resp_sz %u max_pages %d\n", __func__, inode, max_resp_sz, max_pages); diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c index 9c8eca315f43..a7f3dedc4ec7 100644 --- a/fs/nfs/nfs4namespace.c +++ b/fs/nfs/nfs4namespace.c @@ -52,6 +52,30 @@ Elong: } /* + * return the path component of "<server>:<path>" + * nfspath - the "<server>:<path>" string + * end - one past the last char that could contain "<server>:" + * returns NULL on failure + */ +static char *nfs_path_component(const char *nfspath, const char *end) +{ + char *p; + + if (*nfspath == '[') { + /* parse [] escaped IPv6 addrs */ + p = strchr(nfspath, ']'); + if (p != NULL && ++p < end && *p == ':') + return p + 1; + } else { + /* otherwise split on first colon */ + p = strchr(nfspath, ':'); + if (p != NULL && p < end) + return p + 1; + } + return NULL; +} + +/* * Determine the mount path as a string */ static char *nfs4_path(struct dentry *dentry, char *buffer, ssize_t buflen) @@ -59,9 +83,9 @@ static char *nfs4_path(struct dentry *dentry, char *buffer, ssize_t buflen) char *limit; char *path = nfs_path(&limit, dentry, buffer, buflen); if (!IS_ERR(path)) { - char *colon = strchr(path, ':'); - if (colon && colon < limit) - path = colon + 1; + char *path_component = nfs_path_component(path, limit); + if (path_component) + return path_component; } return path; } @@ -108,6 +132,58 @@ static size_t nfs_parse_server_name(char *string, size_t len, return ret; } +static rpc_authflavor_t nfs4_negotiate_security(struct inode *inode, struct qstr *name) +{ + struct page *page; + struct nfs4_secinfo_flavors *flavors; + rpc_authflavor_t flavor; + int err; + + page = alloc_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + flavors = page_address(page); + + err = nfs4_proc_secinfo(inode, name, flavors); + if (err < 0) { + flavor = err; + goto out; + } + + flavor = nfs_find_best_sec(flavors); + +out: + put_page(page); + return flavor; +} + +/* + * Please call rpc_shutdown_client() when you are done with this client. + */ +struct rpc_clnt *nfs4_create_sec_client(struct rpc_clnt *clnt, struct inode *inode, + struct qstr *name) +{ + struct rpc_clnt *clone; + struct rpc_auth *auth; + rpc_authflavor_t flavor; + + flavor = nfs4_negotiate_security(inode, name); + if (flavor < 0) + return ERR_PTR(flavor); + + clone = rpc_clone_client(clnt); + if (IS_ERR(clone)) + return clone; + + auth = rpcauth_create(flavor, clone); + if (!auth) { + rpc_shutdown_client(clone); + clone = ERR_PTR(-EIO); + } + + return clone; +} + static struct vfsmount *try_location(struct nfs_clone_mount *mountdata, char *page, char *page2, const struct nfs4_fs_location *location) @@ -224,7 +300,7 @@ out: * @dentry - dentry of referral * */ -struct vfsmount *nfs_do_refmount(struct dentry *dentry) +struct vfsmount *nfs_do_refmount(struct rpc_clnt *client, struct dentry *dentry) { struct vfsmount *mnt = ERR_PTR(-ENOMEM); struct dentry *parent; @@ -250,7 +326,7 @@ struct vfsmount *nfs_do_refmount(struct dentry *dentry) dprintk("%s: getting locations for %s/%s\n", __func__, parent->d_name.name, dentry->d_name.name); - err = nfs4_proc_fs_locations(parent->d_inode, &dentry->d_name, fs_locations, page); + err = nfs4_proc_fs_locations(client, parent->d_inode, &dentry->d_name, fs_locations, page); dput(parent); if (err != 0 || fs_locations->nlocations <= 0 || diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 60d5f4c26dda..99650aaf8937 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2377,8 +2377,9 @@ static int nfs4_proc_get_root(struct nfs_server *server, struct nfs_fh *fhandle, * Note that we'll actually follow the referral later when * we detect fsid mismatch in inode revalidation */ -static int nfs4_get_referral(struct inode *dir, const struct qstr *name, - struct nfs_fattr *fattr, struct nfs_fh *fhandle) +static int nfs4_get_referral(struct rpc_clnt *client, struct inode *dir, + const struct qstr *name, struct nfs_fattr *fattr, + struct nfs_fh *fhandle) { int status = -ENOMEM; struct page *page = NULL; @@ -2391,7 +2392,7 @@ static int nfs4_get_referral(struct inode *dir, const struct qstr *name, if (locations == NULL) goto out; - status = nfs4_proc_fs_locations(dir, name, locations, page); + status = nfs4_proc_fs_locations(client, dir, name, locations, page); if (status != 0) goto out; /* Make sure server returned a different fsid for the referral */ @@ -2528,39 +2529,84 @@ static int _nfs4_proc_lookup(struct rpc_clnt *clnt, struct inode *dir, return status; } -void nfs_fixup_secinfo_attributes(struct nfs_fattr *fattr, struct nfs_fh *fh) +static void nfs_fixup_secinfo_attributes(struct nfs_fattr *fattr) { - memset(fh, 0, sizeof(struct nfs_fh)); - fattr->fsid.major = 1; fattr->valid |= NFS_ATTR_FATTR_TYPE | NFS_ATTR_FATTR_MODE | - NFS_ATTR_FATTR_NLINK | NFS_ATTR_FATTR_FSID | NFS_ATTR_FATTR_MOUNTPOINT; + NFS_ATTR_FATTR_NLINK | NFS_ATTR_FATTR_MOUNTPOINT; fattr->mode = S_IFDIR | S_IRUGO | S_IXUGO; fattr->nlink = 2; } -static int nfs4_proc_lookup(struct rpc_clnt *clnt, struct inode *dir, struct qstr *name, - struct nfs_fh *fhandle, struct nfs_fattr *fattr) +static int nfs4_proc_lookup_common(struct rpc_clnt **clnt, struct inode *dir, + struct qstr *name, struct nfs_fh *fhandle, + struct nfs_fattr *fattr) { struct nfs4_exception exception = { }; + struct rpc_clnt *client = *clnt; int err; do { - int status; - - status = _nfs4_proc_lookup(clnt, dir, name, fhandle, fattr); - switch (status) { + err = _nfs4_proc_lookup(client, dir, name, fhandle, fattr); + switch (err) { case -NFS4ERR_BADNAME: - return -ENOENT; + err = -ENOENT; + goto out; case -NFS4ERR_MOVED: - return nfs4_get_referral(dir, name, fattr, fhandle); + err = nfs4_get_referral(client, dir, name, fattr, fhandle); + goto out; case -NFS4ERR_WRONGSEC: - nfs_fixup_secinfo_attributes(fattr, fhandle); + err = -EPERM; + if (client != *clnt) + goto out; + + client = nfs4_create_sec_client(client, dir, name); + if (IS_ERR(client)) + return PTR_ERR(client); + + exception.retry = 1; + break; + default: + err = nfs4_handle_exception(NFS_SERVER(dir), err, &exception); } - err = nfs4_handle_exception(NFS_SERVER(dir), - status, &exception); } while (exception.retry); + +out: + if (err == 0) + *clnt = client; + else if (client != *clnt) + rpc_shutdown_client(client); + return err; } +static int nfs4_proc_lookup(struct rpc_clnt *clnt, struct inode *dir, struct qstr *name, + struct nfs_fh *fhandle, struct nfs_fattr *fattr) +{ + int status; + struct rpc_clnt *client = NFS_CLIENT(dir); + + status = nfs4_proc_lookup_common(&client, dir, name, fhandle, fattr); + if (client != NFS_CLIENT(dir)) { + rpc_shutdown_client(client); + nfs_fixup_secinfo_attributes(fattr); + } + return status; +} + +struct rpc_clnt * +nfs4_proc_lookup_mountpoint(struct inode *dir, struct qstr *name, + struct nfs_fh *fhandle, struct nfs_fattr *fattr) +{ + int status; + struct rpc_clnt *client = rpc_clone_client(NFS_CLIENT(dir)); + + status = nfs4_proc_lookup_common(&client, dir, name, fhandle, fattr); + if (status < 0) { + rpc_shutdown_client(client); + return ERR_PTR(status); + } + return client; +} + static int _nfs4_proc_access(struct inode *inode, struct nfs_access_entry *entry) { struct nfs_server *server = NFS_SERVER(inode); @@ -3628,16 +3674,16 @@ out: return ret; } -static void nfs4_write_cached_acl(struct inode *inode, const char *buf, size_t acl_len) +static void nfs4_write_cached_acl(struct inode *inode, struct page **pages, size_t pgbase, size_t acl_len) { struct nfs4_cached_acl *acl; - if (buf && acl_len <= PAGE_SIZE) { + if (pages && acl_len <= PAGE_SIZE) { acl = kmalloc(sizeof(*acl) + acl_len, GFP_KERNEL); if (acl == NULL) goto out; acl->cached = 1; - memcpy(acl->data, buf, acl_len); + _copy_from_pages(acl->data, pages, pgbase, acl_len); } else { acl = kmalloc(sizeof(*acl), GFP_KERNEL); if (acl == NULL) @@ -3670,7 +3716,6 @@ static ssize_t __nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t bu struct nfs_getaclres res = { .acl_len = buflen, }; - void *resp_buf; struct rpc_message msg = { .rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_GETACL], .rpc_argp = &args, @@ -3684,24 +3729,27 @@ static ssize_t __nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t bu if (npages == 0) npages = 1; + /* Add an extra page to handle the bitmap returned */ + npages++; + for (i = 0; i < npages; i++) { pages[i] = alloc_page(GFP_KERNEL); if (!pages[i]) goto out_free; } - if (npages > 1) { - /* for decoding across pages */ - res.acl_scratch = alloc_page(GFP_KERNEL); - if (!res.acl_scratch) - goto out_free; - } + + /* for decoding across pages */ + res.acl_scratch = alloc_page(GFP_KERNEL); + if (!res.acl_scratch) + goto out_free; + args.acl_len = npages * PAGE_SIZE; args.acl_pgbase = 0; + /* Let decode_getfacl know not to fail if the ACL data is larger than * the page we send as a guess */ if (buf == NULL) res.acl_flags |= NFS4_ACL_LEN_REQUEST; - resp_buf = page_address(pages[0]); dprintk("%s buf %p buflen %zu npages %d args.acl_len %zu\n", __func__, buf, buflen, npages, args.acl_len); @@ -3712,9 +3760,9 @@ static ssize_t __nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t bu acl_len = res.acl_len - res.acl_data_offset; if (acl_len > args.acl_len) - nfs4_write_cached_acl(inode, NULL, acl_len); + nfs4_write_cached_acl(inode, NULL, 0, acl_len); else - nfs4_write_cached_acl(inode, resp_buf + res.acl_data_offset, + nfs4_write_cached_acl(inode, pages, res.acl_data_offset, acl_len); if (buf) { ret = -ERANGE; @@ -4919,8 +4967,10 @@ static void nfs_fixup_referral_attributes(struct nfs_fattr *fattr) fattr->nlink = 2; } -int nfs4_proc_fs_locations(struct inode *dir, const struct qstr *name, - struct nfs4_fs_locations *fs_locations, struct page *page) +static int _nfs4_proc_fs_locations(struct rpc_clnt *client, struct inode *dir, + const struct qstr *name, + struct nfs4_fs_locations *fs_locations, + struct page *page) { struct nfs_server *server = NFS_SERVER(dir); u32 bitmask[2] = { @@ -4954,11 +5004,26 @@ int nfs4_proc_fs_locations(struct inode *dir, const struct qstr *name, nfs_fattr_init(&fs_locations->fattr); fs_locations->server = server; fs_locations->nlocations = 0; - status = nfs4_call_sync(server->client, server, &msg, &args.seq_args, &res.seq_res, 0); + status = nfs4_call_sync(client, server, &msg, &args.seq_args, &res.seq_res, 0); dprintk("%s: returned status = %d\n", __func__, status); return status; } +int nfs4_proc_fs_locations(struct rpc_clnt *client, struct inode *dir, + const struct qstr *name, + struct nfs4_fs_locations *fs_locations, + struct page *page) +{ + struct nfs4_exception exception = { }; + int err; + do { + err = nfs4_handle_exception(NFS_SERVER(dir), + _nfs4_proc_fs_locations(client, dir, name, fs_locations, page), + &exception); + } while (exception.retry); + return err; +} + static int _nfs4_proc_secinfo(struct inode *dir, const struct qstr *name, struct nfs4_secinfo_flavors *flavors) { int status; @@ -4981,8 +5046,8 @@ static int _nfs4_proc_secinfo(struct inode *dir, const struct qstr *name, struct return status; } -static int nfs4_proc_secinfo(struct inode *dir, const struct qstr *name, - struct nfs4_secinfo_flavors *flavors) +int nfs4_proc_secinfo(struct inode *dir, const struct qstr *name, + struct nfs4_secinfo_flavors *flavors) { struct nfs4_exception exception = { }; int err; @@ -5057,10 +5122,9 @@ int nfs4_proc_exchange_id(struct nfs_client *clp, struct rpc_cred *cred) nfs4_construct_boot_verifier(clp, &verifier); args.id_len = scnprintf(args.id, sizeof(args.id), - "%s/%s.%s/%u", + "%s/%s/%u", clp->cl_ipaddr, - init_utsname()->nodename, - init_utsname()->domainname, + clp->cl_rpcclient->cl_nodename, clp->cl_rpcclient->cl_auth->au_flavor); res.server_scope = kzalloc(sizeof(struct server_scope), GFP_KERNEL); diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 77fc5f959c4e..c54aae364bee 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -4258,8 +4258,6 @@ static int decode_getfattr_attrs(struct xdr_stream *xdr, uint32_t *bitmap, status = decode_attr_error(xdr, bitmap, &err); if (status < 0) goto xdr_error; - if (err == -NFS4ERR_WRONGSEC) - nfs_fixup_secinfo_attributes(fattr, fh); status = decode_attr_filehandle(xdr, bitmap, fh); if (status < 0) @@ -4902,11 +4900,19 @@ static int decode_getacl(struct xdr_stream *xdr, struct rpc_rqst *req, bitmap[3] = {0}; struct kvec *iov = req->rq_rcv_buf.head; int status; + size_t page_len = xdr->buf->page_len; res->acl_len = 0; if ((status = decode_op_hdr(xdr, OP_GETATTR)) != 0) goto out; + bm_p = xdr->p; + res->acl_data_offset = be32_to_cpup(bm_p) + 2; + res->acl_data_offset <<= 2; + /* Check if the acl data starts beyond the allocated buffer */ + if (res->acl_data_offset > page_len) + return -ERANGE; + if ((status = decode_attr_bitmap(xdr, bitmap)) != 0) goto out; if ((status = decode_attr_length(xdr, &attrlen, &savep)) != 0) @@ -4916,28 +4922,24 @@ static int decode_getacl(struct xdr_stream *xdr, struct rpc_rqst *req, return -EIO; if (likely(bitmap[0] & FATTR4_WORD0_ACL)) { size_t hdrlen; - u32 recvd; /* The bitmap (xdr len + bitmaps) and the attr xdr len words * are stored with the acl data to handle the problem of * variable length bitmaps.*/ xdr->p = bm_p; - res->acl_data_offset = be32_to_cpup(bm_p) + 2; - res->acl_data_offset <<= 2; /* We ignore &savep and don't do consistency checks on * the attr length. Let userspace figure it out.... */ hdrlen = (u8 *)xdr->p - (u8 *)iov->iov_base; attrlen += res->acl_data_offset; - recvd = req->rq_rcv_buf.len - hdrlen; - if (attrlen > recvd) { + if (attrlen > page_len) { if (res->acl_flags & NFS4_ACL_LEN_REQUEST) { /* getxattr interface called with a NULL buf */ res->acl_len = attrlen; goto out; } - dprintk("NFS: acl reply: attrlen %u > recvd %u\n", - attrlen, recvd); + dprintk("NFS: acl reply: attrlen %u > page_len %zu\n", + attrlen, page_len); return -EINVAL; } xdr_read_pages(xdr, attrlen); @@ -5090,16 +5092,13 @@ out_err: return -EINVAL; } -static int decode_secinfo(struct xdr_stream *xdr, struct nfs4_secinfo_res *res) +static int decode_secinfo_common(struct xdr_stream *xdr, struct nfs4_secinfo_res *res) { struct nfs4_secinfo_flavor *sec_flavor; int status; __be32 *p; int i, num_flavors; - status = decode_op_hdr(xdr, OP_SECINFO); - if (status) - goto out; p = xdr_inline_decode(xdr, 4); if (unlikely(!p)) goto out_overflow; @@ -5125,6 +5124,7 @@ static int decode_secinfo(struct xdr_stream *xdr, struct nfs4_secinfo_res *res) res->flavors->num_flavors++; } + status = 0; out: return status; out_overflow: @@ -5132,7 +5132,23 @@ out_overflow: return -EIO; } +static int decode_secinfo(struct xdr_stream *xdr, struct nfs4_secinfo_res *res) +{ + int status = decode_op_hdr(xdr, OP_SECINFO); + if (status) + return status; + return decode_secinfo_common(xdr, res); +} + #if defined(CONFIG_NFS_V4_1) +static int decode_secinfo_no_name(struct xdr_stream *xdr, struct nfs4_secinfo_res *res) +{ + int status = decode_op_hdr(xdr, OP_SECINFO_NO_NAME); + if (status) + return status; + return decode_secinfo_common(xdr, res); +} + static int decode_exchange_id(struct xdr_stream *xdr, struct nfs41_exchange_id_res *res) { @@ -6817,7 +6833,7 @@ static int nfs4_xdr_dec_secinfo_no_name(struct rpc_rqst *rqstp, status = decode_putrootfh(xdr); if (status) goto out; - status = decode_secinfo(xdr, res); + status = decode_secinfo_no_name(xdr, res); out: return status; } diff --git a/fs/nfs/objlayout/objlayout.c b/fs/nfs/objlayout/objlayout.c index 8d45f1c318ce..595c5fc21a19 100644 --- a/fs/nfs/objlayout/objlayout.c +++ b/fs/nfs/objlayout/objlayout.c @@ -604,7 +604,6 @@ int objlayout_get_deviceinfo(struct pnfs_layout_hdr *pnfslay, { struct objlayout_deviceinfo *odi; struct pnfs_device pd; - struct super_block *sb; struct page *page, **pages; u32 *p; int err; @@ -623,7 +622,6 @@ int objlayout_get_deviceinfo(struct pnfs_layout_hdr *pnfslay, pd.pglen = PAGE_SIZE; pd.mincount = 0; - sb = pnfslay->plh_inode->i_sb; err = nfs4_proc_getdeviceinfo(NFS_SERVER(pnfslay->plh_inode), &pd); dprintk("%s nfs_getdeviceinfo returned %d\n", __func__, err); if (err) diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index b5d451586943..38512bcd2e98 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -587,7 +587,7 @@ send_layoutget(struct pnfs_layout_hdr *lo, /* allocate pages for xdr post processing */ max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz; - max_pages = max_resp_sz >> PAGE_SHIFT; + max_pages = nfs_page_array_len(0, max_resp_sz); pages = kcalloc(max_pages, sizeof(struct page *), gfp_flags); if (!pages) diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 1e6715f0616c..4ac7fca7e4bf 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -2428,7 +2428,7 @@ nfs_xdev_mount(struct file_system_type *fs_type, int flags, dprintk("--> nfs_xdev_mount()\n"); /* create a new volume representation */ - server = nfs_clone_server(NFS_SB(data->sb), data->fh, data->fattr); + server = nfs_clone_server(NFS_SB(data->sb), data->fh, data->fattr, data->authflavor); if (IS_ERR(server)) { error = PTR_ERR(server); goto out_err_noserver; @@ -2955,7 +2955,7 @@ nfs4_xdev_mount(struct file_system_type *fs_type, int flags, dprintk("--> nfs4_xdev_mount()\n"); /* create a new volume representation */ - server = nfs_clone_server(NFS_SB(data->sb), data->fh, data->fattr); + server = nfs_clone_server(NFS_SB(data->sb), data->fh, data->fattr, data->authflavor); if (IS_ERR(server)) { error = PTR_ERR(server); goto out_err_noserver; diff --git a/fs/nfsd/nfs4recover.c b/fs/nfsd/nfs4recover.c index 4767429264a2..ed3f9206a0ee 100644 --- a/fs/nfsd/nfs4recover.c +++ b/fs/nfsd/nfs4recover.c @@ -577,7 +577,7 @@ cld_pipe_downcall(struct file *filp, const char __user *src, size_t mlen) struct cld_net *cn = nn->cld_net; if (mlen != sizeof(*cmsg)) { - dprintk("%s: got %lu bytes, expected %lu\n", __func__, mlen, + dprintk("%s: got %zu bytes, expected %zu\n", __func__, mlen, sizeof(*cmsg)); return -EINVAL; } diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index eba66043cf1b..e8bcc4742e0e 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -499,9 +499,10 @@ typedef u64 acpi_integer; #define ACPI_STATE_D0 (u8) 0 #define ACPI_STATE_D1 (u8) 1 #define ACPI_STATE_D2 (u8) 2 -#define ACPI_STATE_D3 (u8) 3 -#define ACPI_STATE_D3_COLD (u8) 4 -#define ACPI_D_STATES_MAX ACPI_STATE_D3_COLD +#define ACPI_STATE_D3_HOT (u8) 3 +#define ACPI_STATE_D3 (u8) 4 +#define ACPI_STATE_D3_COLD ACPI_STATE_D3 +#define ACPI_D_STATES_MAX ACPI_STATE_D3 #define ACPI_D_STATE_COUNT 5 #define ACPI_STATE_C0 (u8) 0 diff --git a/include/asm-generic/statfs.h b/include/asm-generic/statfs.h index 0fd28e028de1..c749af9c0983 100644 --- a/include/asm-generic/statfs.h +++ b/include/asm-generic/statfs.h @@ -15,7 +15,7 @@ typedef __kernel_fsid_t fsid_t; * with a 10' pole. */ #ifndef __statfs_word -#if BITS_PER_LONG == 64 +#if __BITS_PER_LONG == 64 #define __statfs_word long #else #define __statfs_word __u32 diff --git a/include/linux/efi.h b/include/linux/efi.h index 88ec80670d5f..ec45ccd8708a 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -554,7 +554,18 @@ extern int __init efi_setup_pcdp_console(char *); #define EFI_VARIABLE_NON_VOLATILE 0x0000000000000001 #define EFI_VARIABLE_BOOTSERVICE_ACCESS 0x0000000000000002 #define EFI_VARIABLE_RUNTIME_ACCESS 0x0000000000000004 - +#define EFI_VARIABLE_HARDWARE_ERROR_RECORD 0x0000000000000008 +#define EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS 0x0000000000000010 +#define EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS 0x0000000000000020 +#define EFI_VARIABLE_APPEND_WRITE 0x0000000000000040 + +#define EFI_VARIABLE_MASK (EFI_VARIABLE_NON_VOLATILE | \ + EFI_VARIABLE_BOOTSERVICE_ACCESS | \ + EFI_VARIABLE_RUNTIME_ACCESS | \ + EFI_VARIABLE_HARDWARE_ERROR_RECORD | \ + EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS | \ + EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS | \ + EFI_VARIABLE_APPEND_WRITE) /* * The type of search to perform when calling boottime->locate_handle */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 42378d637ffb..e926df7b54c9 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -996,7 +996,8 @@ extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev, extern void ata_sas_port_destroy(struct ata_port *); extern struct ata_port *ata_sas_port_alloc(struct ata_host *, struct ata_port_info *, struct Scsi_Host *); -extern int ata_sas_async_port_init(struct ata_port *); +extern void ata_sas_async_probe(struct ata_port *ap); +extern int ata_sas_sync_probe(struct ata_port *ap); extern int ata_sas_port_init(struct ata_port *); extern int ata_sas_port_start(struct ata_port *ap); extern void ata_sas_port_stop(struct ata_port *ap); diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index ee96cd51d8b2..1318ca622633 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -6,7 +6,7 @@ * * ABX500 core access functions. * The abx500 interface is used for the Analog Baseband chip - * ab3100, ab5500, and ab8500. + * ab3100 and ab8500. * * Author: Mattias Wallin <mattias.wallin@stericsson.com> * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> @@ -30,9 +30,6 @@ struct device; #define AB3100_P1G 0xc6 #define AB3100_R2A 0xc7 #define AB3100_R2B 0xc8 -#define AB5500_1_0 0x20 -#define AB5500_1_1 0x21 -#define AB5500_2_0 0x24 /* * AB3100, EVENTA1, A2 and A3 event register flags diff --git a/include/linux/mfd/abx500/ab5500.h b/include/linux/mfd/abx500/ab5500.h deleted file mode 100644 index 54f820ed73bb..000000000000 --- a/include/linux/mfd/abx500/ab5500.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * Copyright (C) ST-Ericsson 2011 - * - * License Terms: GNU General Public License v2 - */ -#ifndef MFD_AB5500_H -#define MFD_AB5500_H - -struct device; - -enum ab5500_devid { - AB5500_DEVID_ADC, - AB5500_DEVID_LEDS, - AB5500_DEVID_POWER, - AB5500_DEVID_REGULATORS, - AB5500_DEVID_SIM, - AB5500_DEVID_RTC, - AB5500_DEVID_CHARGER, - AB5500_DEVID_FUELGAUGE, - AB5500_DEVID_VIBRATOR, - AB5500_DEVID_CODEC, - AB5500_DEVID_USB, - AB5500_DEVID_OTP, - AB5500_DEVID_VIDEO, - AB5500_DEVID_DBIECI, - AB5500_DEVID_ONSWA, - AB5500_NUM_DEVICES, -}; - -enum ab5500_banks { - AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP = 0, - AB5500_BANK_VDDDIG_IO_I2C_CLK_TST = 1, - AB5500_BANK_VDENC = 2, - AB5500_BANK_SIM_USBSIM = 3, - AB5500_BANK_LED = 4, - AB5500_BANK_ADC = 5, - AB5500_BANK_RTC = 6, - AB5500_BANK_STARTUP = 7, - AB5500_BANK_DBI_ECI = 8, - AB5500_BANK_CHG = 9, - AB5500_BANK_FG_BATTCOM_ACC = 10, - AB5500_BANK_USB = 11, - AB5500_BANK_IT = 12, - AB5500_BANK_VIBRA = 13, - AB5500_BANK_AUDIO_HEADSETUSB = 14, - AB5500_NUM_BANKS = 15, -}; - -enum ab5500_banks_addr { - AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP = 0x4A, - AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST = 0x4B, - AB5500_ADDR_VDENC = 0x06, - AB5500_ADDR_SIM_USBSIM = 0x04, - AB5500_ADDR_LED = 0x10, - AB5500_ADDR_ADC = 0x0A, - AB5500_ADDR_RTC = 0x0F, - AB5500_ADDR_STARTUP = 0x03, - AB5500_ADDR_DBI_ECI = 0x07, - AB5500_ADDR_CHG = 0x0B, - AB5500_ADDR_FG_BATTCOM_ACC = 0x0C, - AB5500_ADDR_USB = 0x05, - AB5500_ADDR_IT = 0x0E, - AB5500_ADDR_VIBRA = 0x02, - AB5500_ADDR_AUDIO_HEADSETUSB = 0x0D, -}; - -/* - * Interrupt register offsets - * Bank : 0x0E - */ -#define AB5500_IT_SOURCE0_REG 0x20 -#define AB5500_IT_SOURCE1_REG 0x21 -#define AB5500_IT_SOURCE2_REG 0x22 -#define AB5500_IT_SOURCE3_REG 0x23 -#define AB5500_IT_SOURCE4_REG 0x24 -#define AB5500_IT_SOURCE5_REG 0x25 -#define AB5500_IT_SOURCE6_REG 0x26 -#define AB5500_IT_SOURCE7_REG 0x27 -#define AB5500_IT_SOURCE8_REG 0x28 -#define AB5500_IT_SOURCE9_REG 0x29 -#define AB5500_IT_SOURCE10_REG 0x2A -#define AB5500_IT_SOURCE11_REG 0x2B -#define AB5500_IT_SOURCE12_REG 0x2C -#define AB5500_IT_SOURCE13_REG 0x2D -#define AB5500_IT_SOURCE14_REG 0x2E -#define AB5500_IT_SOURCE15_REG 0x2F -#define AB5500_IT_SOURCE16_REG 0x30 -#define AB5500_IT_SOURCE17_REG 0x31 -#define AB5500_IT_SOURCE18_REG 0x32 -#define AB5500_IT_SOURCE19_REG 0x33 -#define AB5500_IT_SOURCE20_REG 0x34 -#define AB5500_IT_SOURCE21_REG 0x35 -#define AB5500_IT_SOURCE22_REG 0x36 -#define AB5500_IT_SOURCE23_REG 0x37 - -#define AB5500_NUM_IRQ_REGS 23 - -/** - * struct ab5500 - * @access_mutex: lock out concurrent accesses to the AB registers - * @dev: a pointer to the device struct for this chip driver - * @ab5500_irq: the analog baseband irq - * @irq_base: the platform configuration irq base for subdevices - * @chip_name: name of this chip variant - * @chip_id: 8 bit chip ID for this chip variant - * @irq_lock: a lock to protect the mask - * @abb_events: a local bit mask of the prcmu wakeup events - * @event_mask: a local copy of the mask event registers - * @last_event_mask: a copy of the last event_mask written to hardware - * @startup_events: a copy of the first reading of the event registers - * @startup_events_read: whether the first events have been read - */ -struct ab5500 { - struct mutex access_mutex; - struct device *dev; - unsigned int ab5500_irq; - unsigned int irq_base; - char chip_name[32]; - u8 chip_id; - struct mutex irq_lock; - u32 abb_events; - u8 mask[AB5500_NUM_IRQ_REGS]; - u8 oldmask[AB5500_NUM_IRQ_REGS]; - u8 startup_events[AB5500_NUM_IRQ_REGS]; - bool startup_events_read; -#ifdef CONFIG_DEBUG_FS - unsigned int debug_bank; - unsigned int debug_address; -#endif -}; - -struct ab5500_platform_data { - struct {unsigned int base; unsigned int count; } irq; - void *dev_data[AB5500_NUM_DEVICES]; - struct abx500_init_settings *init_settings; - unsigned int init_settings_sz; - bool pm_power_off; -}; - -#endif /* MFD_AB5500_H */ diff --git a/include/linux/mfd/db5500-prcmu.h b/include/linux/mfd/db5500-prcmu.h deleted file mode 100644 index 5a049dfaf153..000000000000 --- a/include/linux/mfd/db5500-prcmu.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License Terms: GNU General Public License v2 - * - * U5500 PRCMU API. - */ -#ifndef __MFD_DB5500_PRCMU_H -#define __MFD_DB5500_PRCMU_H - -static inline int prcmu_resetout(u8 resoutn, u8 state) -{ - return 0; -} - -static inline int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state) -{ - return 0; -} - -static inline int db5500_prcmu_request_clock(u8 clock, bool enable) -{ - return 0; -} - -static inline int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, - bool keep_ap_pll) -{ - return 0; -} - -static inline int db5500_prcmu_config_esram0_deep_sleep(u8 state) -{ - return 0; -} - -static inline u16 db5500_prcmu_get_reset_code(void) -{ - return 0; -} - -static inline bool db5500_prcmu_is_ac_wake_requested(void) -{ - return 0; -} - -static inline int db5500_prcmu_set_arm_opp(u8 opp) -{ - return 0; -} - -static inline int db5500_prcmu_get_arm_opp(void) -{ - return 0; -} - -static inline void db5500_prcmu_config_abb_event_readout(u32 abb_events) {} - -static inline void db5500_prcmu_get_abb_event_buffer(void __iomem **buf) {} - -static inline void db5500_prcmu_system_reset(u16 reset_code) {} - -static inline void db5500_prcmu_enable_wakeups(u32 wakeups) {} - -#ifdef CONFIG_MFD_DB5500_PRCMU - -void db5500_prcmu_early_init(void); -int db5500_prcmu_set_display_clocks(void); -int db5500_prcmu_disable_dsipll(void); -int db5500_prcmu_enable_dsipll(void); -int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); -int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); - -#else /* !CONFIG_UX500_SOC_DB5500 */ - -static inline void db5500_prcmu_early_init(void) {} - -static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) -{ - return -ENOSYS; -} - -static inline int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) -{ - return -ENOSYS; -} - -static inline int db5500_prcmu_set_display_clocks(void) -{ - return 0; -} - -static inline int db5500_prcmu_disable_dsipll(void) -{ - return 0; -} - -static inline int db5500_prcmu_enable_dsipll(void) -{ - return 0; -} - -#endif /* CONFIG_MFD_DB5500_PRCMU */ - -#endif /* __MFD_DB5500_PRCMU_H */ diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index d7674eb7305f..5a13f93d8f1c 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -55,17 +55,6 @@ enum prcmu_wakeup_index { #define NUM_EPOD_ID 8 /* - * DB5500 EPODs - */ -#define DB5500_EPOD_ID_BASE 0x0100 -#define DB5500_EPOD_ID_SGA (DB5500_EPOD_ID_BASE + 0) -#define DB5500_EPOD_ID_HVA (DB5500_EPOD_ID_BASE + 1) -#define DB5500_EPOD_ID_SIA (DB5500_EPOD_ID_BASE + 2) -#define DB5500_EPOD_ID_DISP (DB5500_EPOD_ID_BASE + 3) -#define DB5500_EPOD_ID_ESRAM12 (DB5500_EPOD_ID_BASE + 6) -#define DB5500_NUM_EPOD_ID 7 - -/* * state definition for EPOD (power domain) * - EPOD_STATE_NO_CHANGE: The EPOD should remain unchanged * - EPOD_STATE_OFF: The EPOD is switched off @@ -80,29 +69,6 @@ enum prcmu_wakeup_index { #define EPOD_STATE_ON_CLK_OFF 0x03 #define EPOD_STATE_ON 0x04 -/* DB5500 CLKOUT IDs */ -enum { - DB5500_CLKOUT0 = 0, - DB5500_CLKOUT1, -}; - -/* DB5500 CLKOUTx sources */ -enum { - DB5500_CLKOUT_REF_CLK_SEL0, - DB5500_CLKOUT_RTC_CLK0_SEL0, - DB5500_CLKOUT_ULP_CLK_SEL0, - DB5500_CLKOUT_STATIC0, - DB5500_CLKOUT_REFCLK, - DB5500_CLKOUT_ULPCLK, - DB5500_CLKOUT_ARMCLK, - DB5500_CLKOUT_SYSACC0CLK, - DB5500_CLKOUT_SOC0PLLCLK, - DB5500_CLKOUT_SOC1PLLCLK, - DB5500_CLKOUT_DDRPLLCLK, - DB5500_CLKOUT_TVCLK, - DB5500_CLKOUT_IRDACLK, -}; - /* * CLKOUT sources */ @@ -248,101 +214,66 @@ enum ddr_pwrst { }; #include <linux/mfd/db8500-prcmu.h> -#include <linux/mfd/db5500-prcmu.h> -#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500) +#if defined(CONFIG_UX500_SOC_DB8500) #include <mach/id.h> static inline void __init prcmu_early_init(void) { - if (cpu_is_u5500()) - return db5500_prcmu_early_init(); - else - return db8500_prcmu_early_init(); + return db8500_prcmu_early_init(); } static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll) { - if (cpu_is_u5500()) - return db5500_prcmu_set_power_state(state, keep_ulp_clk, - keep_ap_pll); - else - return db8500_prcmu_set_power_state(state, keep_ulp_clk, - keep_ap_pll); + return db8500_prcmu_set_power_state(state, keep_ulp_clk, + keep_ap_pll); } static inline u8 prcmu_get_power_state_result(void) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_get_power_state_result(); + return db8500_prcmu_get_power_state_result(); } static inline int prcmu_gic_decouple(void) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_gic_decouple(); + return db8500_prcmu_gic_decouple(); } static inline int prcmu_gic_recouple(void) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_gic_recouple(); + return db8500_prcmu_gic_recouple(); } static inline bool prcmu_gic_pending_irq(void) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_gic_pending_irq(); + return db8500_prcmu_gic_pending_irq(); } static inline bool prcmu_is_cpu_in_wfi(int cpu) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_is_cpu_in_wfi(cpu); + return db8500_prcmu_is_cpu_in_wfi(cpu); } static inline int prcmu_copy_gic_settings(void) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_copy_gic_settings(); + return db8500_prcmu_copy_gic_settings(); } static inline bool prcmu_pending_irq(void) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_pending_irq(); + return db8500_prcmu_pending_irq(); } static inline int prcmu_set_epod(u16 epod_id, u8 epod_state) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_set_epod(epod_id, epod_state); + return db8500_prcmu_set_epod(epod_id, epod_state); } static inline void prcmu_enable_wakeups(u32 wakeups) { - if (cpu_is_u5500()) - db5500_prcmu_enable_wakeups(wakeups); - else - db8500_prcmu_enable_wakeups(wakeups); + db8500_prcmu_enable_wakeups(wakeups); } static inline void prcmu_disable_wakeups(void) @@ -352,18 +283,12 @@ static inline void prcmu_disable_wakeups(void) static inline void prcmu_config_abb_event_readout(u32 abb_events) { - if (cpu_is_u5500()) - db5500_prcmu_config_abb_event_readout(abb_events); - else - db8500_prcmu_config_abb_event_readout(abb_events); + db8500_prcmu_config_abb_event_readout(abb_events); } static inline void prcmu_get_abb_event_buffer(void __iomem **buf) { - if (cpu_is_u5500()) - db5500_prcmu_get_abb_event_buffer(buf); - else - db8500_prcmu_get_abb_event_buffer(buf); + db8500_prcmu_get_abb_event_buffer(buf); } int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); @@ -374,10 +299,7 @@ int prcmu_config_clkout(u8 clkout, u8 source, u8 div); static inline int prcmu_request_clock(u8 clock, bool enable) { - if (cpu_is_u5500()) - return db5500_prcmu_request_clock(clock, enable); - else - return db8500_prcmu_request_clock(clock, enable); + return db8500_prcmu_request_clock(clock, enable); } unsigned long prcmu_clock_rate(u8 clock); @@ -386,211 +308,133 @@ int prcmu_set_clock_rate(u8 clock, unsigned long rate); static inline int prcmu_set_ddr_opp(u8 opp) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_set_ddr_opp(opp); + return db8500_prcmu_set_ddr_opp(opp); } static inline int prcmu_get_ddr_opp(void) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_get_ddr_opp(); + return db8500_prcmu_get_ddr_opp(); } static inline int prcmu_set_arm_opp(u8 opp) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_set_arm_opp(opp); + return db8500_prcmu_set_arm_opp(opp); } static inline int prcmu_get_arm_opp(void) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_get_arm_opp(); + return db8500_prcmu_get_arm_opp(); } static inline int prcmu_set_ape_opp(u8 opp) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_set_ape_opp(opp); + return db8500_prcmu_set_ape_opp(opp); } static inline int prcmu_get_ape_opp(void) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_get_ape_opp(); + return db8500_prcmu_get_ape_opp(); } static inline void prcmu_system_reset(u16 reset_code) { - if (cpu_is_u5500()) - return db5500_prcmu_system_reset(reset_code); - else - return db8500_prcmu_system_reset(reset_code); + return db8500_prcmu_system_reset(reset_code); } static inline u16 prcmu_get_reset_code(void) { - if (cpu_is_u5500()) - return db5500_prcmu_get_reset_code(); - else - return db8500_prcmu_get_reset_code(); + return db8500_prcmu_get_reset_code(); } void prcmu_ac_wake_req(void); void prcmu_ac_sleep_req(void); static inline void prcmu_modem_reset(void) { - if (cpu_is_u5500()) - return; - else - return db8500_prcmu_modem_reset(); + return db8500_prcmu_modem_reset(); } static inline bool prcmu_is_ac_wake_requested(void) { - if (cpu_is_u5500()) - return db5500_prcmu_is_ac_wake_requested(); - else - return db8500_prcmu_is_ac_wake_requested(); + return db8500_prcmu_is_ac_wake_requested(); } static inline int prcmu_set_display_clocks(void) { - if (cpu_is_u5500()) - return db5500_prcmu_set_display_clocks(); - else - return db8500_prcmu_set_display_clocks(); + return db8500_prcmu_set_display_clocks(); } static inline int prcmu_disable_dsipll(void) { - if (cpu_is_u5500()) - return db5500_prcmu_disable_dsipll(); - else - return db8500_prcmu_disable_dsipll(); + return db8500_prcmu_disable_dsipll(); } static inline int prcmu_enable_dsipll(void) { - if (cpu_is_u5500()) - return db5500_prcmu_enable_dsipll(); - else - return db8500_prcmu_enable_dsipll(); + return db8500_prcmu_enable_dsipll(); } static inline int prcmu_config_esram0_deep_sleep(u8 state) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_config_esram0_deep_sleep(state); + return db8500_prcmu_config_esram0_deep_sleep(state); } static inline int prcmu_config_hotdog(u8 threshold) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_config_hotdog(threshold); + return db8500_prcmu_config_hotdog(threshold); } static inline int prcmu_config_hotmon(u8 low, u8 high) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_config_hotmon(low, high); + return db8500_prcmu_config_hotmon(low, high); } static inline int prcmu_start_temp_sense(u16 cycles32k) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_start_temp_sense(cycles32k); + return db8500_prcmu_start_temp_sense(cycles32k); } static inline int prcmu_stop_temp_sense(void) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_stop_temp_sense(); + return db8500_prcmu_stop_temp_sense(); } static inline u32 prcmu_read(unsigned int reg) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_read(reg); + return db8500_prcmu_read(reg); } static inline void prcmu_write(unsigned int reg, u32 value) { - if (cpu_is_u5500()) - return; - else - db8500_prcmu_write(reg, value); + db8500_prcmu_write(reg, value); } static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) { - if (cpu_is_u5500()) - return; - else - db8500_prcmu_write_masked(reg, mask, value); + db8500_prcmu_write_masked(reg, mask, value); } static inline int prcmu_enable_a9wdog(u8 id) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_enable_a9wdog(id); + return db8500_prcmu_enable_a9wdog(id); } static inline int prcmu_disable_a9wdog(u8 id) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_disable_a9wdog(id); + return db8500_prcmu_disable_a9wdog(id); } static inline int prcmu_kick_a9wdog(u8 id) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_kick_a9wdog(id); + return db8500_prcmu_kick_a9wdog(id); } static inline int prcmu_load_a9wdog(u8 id, u32 timeout) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_load_a9wdog(id, timeout); + return db8500_prcmu_load_a9wdog(id, timeout); } static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off) { - if (cpu_is_u5500()) - return -EINVAL; - else - return db8500_prcmu_config_a9wdog(num, sleep_auto_off); + return db8500_prcmu_config_a9wdog(num, sleep_auto_off); } #else @@ -768,7 +612,7 @@ static inline void prcmu_clear(unsigned int reg, u32 bits) prcmu_write_masked(reg, bits, 0); } -#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500) +#if defined(CONFIG_UX500_SOC_DB8500) /** * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1. diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h index 0ddd161f3b06..31d2844e6572 100644 --- a/include/linux/netfilter_bridge.h +++ b/include/linux/netfilter_bridge.h @@ -104,9 +104,18 @@ struct bridge_skb_cb { } daddr; }; +static inline void br_drop_fake_rtable(struct sk_buff *skb) +{ + struct dst_entry *dst = skb_dst(skb); + + if (dst && (dst->flags & DST_FAKE_RTABLE)) + skb_dst_drop(skb); +} + #else #define nf_bridge_maybe_copy_header(skb) (0) #define nf_bridge_pad(skb) (0) +#define br_drop_fake_rtable(skb) do { } while (0) #endif /* CONFIG_BRIDGE_NETFILTER */ #endif /* __KERNEL__ */ diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h index c6db9fb33c44..600060e25ec6 100644 --- a/include/linux/seqlock.h +++ b/include/linux/seqlock.h @@ -141,7 +141,7 @@ static inline unsigned __read_seqcount_begin(const seqcount_t *s) unsigned ret; repeat: - ret = s->sequence; + ret = ACCESS_ONCE(s->sequence); if (unlikely(ret & 1)) { cpu_relax(); goto repeat; @@ -166,6 +166,27 @@ static inline unsigned read_seqcount_begin(const seqcount_t *s) } /** + * raw_seqcount_begin - begin a seq-read critical section + * @s: pointer to seqcount_t + * Returns: count to be passed to read_seqcount_retry + * + * raw_seqcount_begin opens a read critical section of the given seqcount. + * Validity of the critical section is tested by checking read_seqcount_retry + * function. + * + * Unlike read_seqcount_begin(), this function will not wait for the count + * to stabilize. If a writer is active when we begin, we will fail the + * read_seqcount_retry() instead of stabilizing at the beginning of the + * critical section. + */ +static inline unsigned raw_seqcount_begin(const seqcount_t *s) +{ + unsigned ret = ACCESS_ONCE(s->sequence); + smp_rmb(); + return ret & ~1; +} + +/** * __read_seqcount_retry - end a seq-read critical section (without barrier) * @s: pointer to seqcount_t * @start: count, from read_seqcount_begin diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 775292a66fa4..111f26b6e28b 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1020,7 +1020,7 @@ static inline void skb_queue_splice(const struct sk_buff_head *list, } /** - * skb_queue_splice - join two skb lists and reinitialise the emptied list + * skb_queue_splice_init - join two skb lists and reinitialise the emptied list * @list: the new list to add * @head: the place to add it in the first list * @@ -1051,7 +1051,7 @@ static inline void skb_queue_splice_tail(const struct sk_buff_head *list, } /** - * skb_queue_splice_tail - join two skb lists and reinitialise the emptied list + * skb_queue_splice_tail_init - join two skb lists and reinitialise the emptied list * @list: the new list to add * @head: the place to add it in the first list * diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 6822d2595aff..db1c5df45224 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -314,6 +314,7 @@ struct hci_conn { __u8 remote_cap; __u8 remote_auth; + bool flush_key; unsigned int sent; @@ -980,7 +981,7 @@ int mgmt_discoverable(struct hci_dev *hdev, u8 discoverable); int mgmt_connectable(struct hci_dev *hdev, u8 connectable); int mgmt_write_scan_failed(struct hci_dev *hdev, u8 scan, u8 status); int mgmt_new_link_key(struct hci_dev *hdev, struct link_key *key, - u8 persistent); + bool persistent); int mgmt_device_connected(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type, u8 addr_type, u32 flags, u8 *name, u8 name_len, u8 *dev_class); diff --git a/include/net/dst.h b/include/net/dst.h index ff4da42fcfc6..bed833d9796a 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -59,6 +59,7 @@ struct dst_entry { #define DST_NOCACHE 0x0010 #define DST_NOCOUNT 0x0020 #define DST_NOPEER 0x0040 +#define DST_FAKE_RTABLE 0x0080 short error; short obsolete; diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index 2bdee51ba30d..72522f087375 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -393,7 +393,7 @@ struct ip_vs_protocol { void (*exit)(struct ip_vs_protocol *pp); - void (*init_netns)(struct net *net, struct ip_vs_proto_data *pd); + int (*init_netns)(struct net *net, struct ip_vs_proto_data *pd); void (*exit_netns)(struct net *net, struct ip_vs_proto_data *pd); @@ -1203,6 +1203,8 @@ ip_vs_lookup_real_service(struct net *net, int af, __u16 protocol, extern int ip_vs_use_count_inc(void); extern void ip_vs_use_count_dec(void); +extern int ip_vs_register_nl_ioctl(void); +extern void ip_vs_unregister_nl_ioctl(void); extern int ip_vs_control_init(void); extern void ip_vs_control_cleanup(void); extern struct ip_vs_dest * diff --git a/include/net/sock.h b/include/net/sock.h index 188532ee88b6..5a0a58ac4126 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1129,9 +1129,9 @@ sk_sockets_allocated_read_positive(struct sock *sk) struct proto *prot = sk->sk_prot; if (mem_cgroup_sockets_enabled && sk->sk_cgrp) - return percpu_counter_sum_positive(sk->sk_cgrp->sockets_allocated); + return percpu_counter_read_positive(sk->sk_cgrp->sockets_allocated); - return percpu_counter_sum_positive(prot->sockets_allocated); + return percpu_counter_read_positive(prot->sockets_allocated); } static inline int diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 5f5ed1b8b41b..f4f1c96dca72 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -217,11 +217,29 @@ struct domain_device { struct kref kref; }; -struct sas_discovery_event { +struct sas_work { + struct list_head drain_node; struct work_struct work; +}; + +static inline void INIT_SAS_WORK(struct sas_work *sw, void (*fn)(struct work_struct *)) +{ + INIT_WORK(&sw->work, fn); + INIT_LIST_HEAD(&sw->drain_node); +} + +struct sas_discovery_event { + struct sas_work work; struct asd_sas_port *port; }; +static inline struct sas_discovery_event *to_sas_discovery_event(struct work_struct *work) +{ + struct sas_discovery_event *ev = container_of(work, typeof(*ev), work.work); + + return ev; +} + struct sas_discovery { struct sas_discovery_event disc_work[DISC_NUM_EVENTS]; unsigned long pending; @@ -244,7 +262,7 @@ struct asd_sas_port { struct list_head destroy_list; enum sas_linkrate linkrate; - struct work_struct work; + struct sas_work work; /* public: */ int id; @@ -270,10 +288,17 @@ struct asd_sas_port { }; struct asd_sas_event { - struct work_struct work; + struct sas_work work; struct asd_sas_phy *phy; }; +static inline struct asd_sas_event *to_asd_sas_event(struct work_struct *work) +{ + struct asd_sas_event *ev = container_of(work, typeof(*ev), work.work); + + return ev; +} + /* The phy pretty much is controlled by the LLDD. * The class only reads those fields. */ @@ -333,10 +358,17 @@ struct scsi_core { }; struct sas_ha_event { - struct work_struct work; + struct sas_work work; struct sas_ha_struct *ha; }; +static inline struct sas_ha_event *to_sas_ha_event(struct work_struct *work) +{ + struct sas_ha_event *ev = container_of(work, typeof(*ev), work.work); + + return ev; +} + enum sas_ha_state { SAS_HA_REGISTERED, SAS_HA_DRAINING, diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h index cdccd2eb7b6c..77670e823ed8 100644 --- a/include/scsi/sas_ata.h +++ b/include/scsi/sas_ata.h @@ -37,7 +37,7 @@ static inline int dev_is_sata(struct domain_device *dev) } int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy); -int sas_ata_init_host_and_port(struct domain_device *found_dev); +int sas_ata_init(struct domain_device *dev); void sas_ata_task_abort(struct sas_task *task); void sas_ata_strategy_handler(struct Scsi_Host *shost); void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, @@ -52,7 +52,7 @@ static inline int dev_is_sata(struct domain_device *dev) { return 0; } -static inline int sas_ata_init_host_and_port(struct domain_device *found_dev) +static inline int sas_ata_init(struct domain_device *dev) { return 0; } diff --git a/include/video/omap-panel-nokia-dsi.h b/include/video/omap-panel-nokia-dsi.h index 7dc71f9c13e6..04219a295539 100644 --- a/include/video/omap-panel-nokia-dsi.h +++ b/include/video/omap-panel-nokia-dsi.h @@ -11,6 +11,7 @@ struct omap_dss_device; * @esd_interval: interval of ESD checks, 0 = disabled (ms) * @ulps_timeout: time to wait before entering ULPS, 0 = disabled (ms) * @use_dsi_backlight: true if panel uses DSI command to control backlight + * @pin_config: DSI pin configuration */ struct nokia_dsi_panel_data { const char *name; @@ -24,6 +25,8 @@ struct nokia_dsi_panel_data { unsigned ulps_timeout; bool use_dsi_backlight; + + struct omap_dsi_pin_config pin_config; }; #endif /* __OMAP_NOKIA_DSI_PANEL_H */ diff --git a/include/video/omap-panel-dvi.h b/include/video/omap-panel-tfp410.h index 87ad567b4229..68c31d79c571 100644 --- a/include/video/omap-panel-dvi.h +++ b/include/video/omap-panel-tfp410.h @@ -1,5 +1,5 @@ /* - * Header for DVI output driver + * Header for TFP410 chip driver * * Copyright (C) 2011 Texas Instruments Inc * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> @@ -17,21 +17,19 @@ * this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef __OMAP_PANEL_DVI_H -#define __OMAP_PANEL_DVI_H +#ifndef __OMAP_PANEL_TFP410_H +#define __OMAP_PANEL_TFP410_H struct omap_dss_device; /** - * struct panel_dvi_platform_data - panel driver configuration data - * @platform_enable: platform specific panel enable function - * @platform_disable: platform specific panel disable function + * struct tfp410_platform_data - panel driver configuration data * @i2c_bus_num: i2c bus id for the panel + * @power_down_gpio: gpio number for PD pin (or -1 if not available) */ -struct panel_dvi_platform_data { - int (*platform_enable)(struct omap_dss_device *dssdev); - void (*platform_disable)(struct omap_dss_device *dssdev); +struct tfp410_platform_data { u16 i2c_bus_num; + int power_down_gpio; }; -#endif /* __OMAP_PANEL_DVI_H */ +#endif /* __OMAP_PANEL_TFP410_H */ diff --git a/include/video/omapdss.h b/include/video/omapdss.h index 483f67caa7ad..1c46a14341dd 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -468,6 +468,21 @@ struct omap_overlay_manager { int (*wait_for_vsync)(struct omap_overlay_manager *mgr); }; +/* 22 pins means 1 clk lane and 10 data lanes */ +#define OMAP_DSS_MAX_DSI_PINS 22 + +struct omap_dsi_pin_config { + int num_pins; + /* + * pin numbers in the following order: + * clk+, clk- + * data1+, data1- + * data2+, data2- + * ... + */ + int pins[OMAP_DSS_MAX_DSI_PINS]; +}; + struct omap_dss_device { struct device dev; @@ -490,17 +505,6 @@ struct omap_dss_device { } sdi; struct { - u8 clk_lane; - u8 clk_pol; - u8 data1_lane; - u8 data1_pol; - u8 data2_lane; - u8 data2_pol; - u8 data3_lane; - u8 data3_pol; - u8 data4_lane; - u8 data4_pol; - int module; bool ext_te; @@ -687,6 +691,8 @@ int omap_dsi_update(struct omap_dss_device *dssdev, int channel, int omap_dsi_request_vc(struct omap_dss_device *dssdev, int *channel); int omap_dsi_set_vc_id(struct omap_dss_device *dssdev, int channel, int vc_id); void omap_dsi_release_vc(struct omap_dss_device *dssdev, int channel); +int omapdss_dsi_configure_pins(struct omap_dss_device *dssdev, + const struct omap_dsi_pin_config *pin_cfg); int omapdss_dsi_display_enable(struct omap_dss_device *dssdev); void omapdss_dsi_display_disable(struct omap_dss_device *dssdev, diff --git a/init/do_mounts.c b/init/do_mounts.c index 0e93f92a0345..42b0707c3481 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -472,7 +472,7 @@ void __init change_floppy(char *fmt, ...) void __init mount_root(void) { #ifdef CONFIG_ROOT_NFS - if (MAJOR(ROOT_DEV) == UNNAMED_MAJOR) { + if (ROOT_DEV == Root_NFS) { if (mount_nfs_root()) return; diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 92a857e3786d..edfd61addcec 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1215,40 +1215,40 @@ struct link_key *hci_find_link_key(struct hci_dev *hdev, bdaddr_t *bdaddr) return NULL; } -static int hci_persistent_key(struct hci_dev *hdev, struct hci_conn *conn, +static bool hci_persistent_key(struct hci_dev *hdev, struct hci_conn *conn, u8 key_type, u8 old_key_type) { /* Legacy key */ if (key_type < 0x03) - return 1; + return true; /* Debug keys are insecure so don't store them persistently */ if (key_type == HCI_LK_DEBUG_COMBINATION) - return 0; + return false; /* Changed combination key and there's no previous one */ if (key_type == HCI_LK_CHANGED_COMBINATION && old_key_type == 0xff) - return 0; + return false; /* Security mode 3 case */ if (!conn) - return 1; + return true; /* Neither local nor remote side had no-bonding as requirement */ if (conn->auth_type > 0x01 && conn->remote_auth > 0x01) - return 1; + return true; /* Local side had dedicated bonding as requirement */ if (conn->auth_type == 0x02 || conn->auth_type == 0x03) - return 1; + return true; /* Remote side had dedicated bonding as requirement */ if (conn->remote_auth == 0x02 || conn->remote_auth == 0x03) - return 1; + return true; /* If none of the above criteria match, then don't store the key * persistently */ - return 0; + return false; } struct smp_ltk *hci_find_ltk(struct hci_dev *hdev, __le16 ediv, u8 rand[8]) @@ -1285,7 +1285,8 @@ int hci_add_link_key(struct hci_dev *hdev, struct hci_conn *conn, int new_key, bdaddr_t *bdaddr, u8 *val, u8 type, u8 pin_len) { struct link_key *key, *old_key; - u8 old_key_type, persistent; + u8 old_key_type; + bool persistent; old_key = hci_find_link_key(hdev, bdaddr); if (old_key) { @@ -1328,10 +1329,8 @@ int hci_add_link_key(struct hci_dev *hdev, struct hci_conn *conn, int new_key, mgmt_new_link_key(hdev, key, persistent); - if (!persistent) { - list_del(&key->list); - kfree(key); - } + if (conn) + conn->flush_key = !persistent; return 0; } diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index b37531094c49..6c065254afc0 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1901,6 +1901,8 @@ static inline void hci_disconn_complete_evt(struct hci_dev *hdev, struct sk_buff } if (ev->status == 0) { + if (conn->type == ACL_LINK && conn->flush_key) + hci_remove_link_key(hdev, &conn->dst); hci_proto_disconn_cfm(conn, ev->reason); hci_conn_del(conn); } @@ -2311,6 +2313,7 @@ static inline void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *sk case HCI_OP_USER_PASSKEY_NEG_REPLY: hci_cc_user_passkey_neg_reply(hdev, skb); + break; case HCI_OP_LE_SET_SCAN_PARAM: hci_cc_le_set_scan_param(hdev, skb); diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 4ef275c69675..4bb03b111122 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -2884,7 +2884,7 @@ int mgmt_write_scan_failed(struct hci_dev *hdev, u8 scan, u8 status) return 0; } -int mgmt_new_link_key(struct hci_dev *hdev, struct link_key *key, u8 persistent) +int mgmt_new_link_key(struct hci_dev *hdev, struct link_key *key, bool persistent) { struct mgmt_ev_new_link_key ev; diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c index 61f65344e711..a2098e3de500 100644 --- a/net/bridge/br_forward.c +++ b/net/bridge/br_forward.c @@ -47,6 +47,7 @@ int br_dev_queue_push_xmit(struct sk_buff *skb) kfree_skb(skb); } else { skb_push(skb, ETH_HLEN); + br_drop_fake_rtable(skb); dev_queue_xmit(skb); } diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c index dec4f3817133..d7f49b63ab0f 100644 --- a/net/bridge/br_netfilter.c +++ b/net/bridge/br_netfilter.c @@ -156,7 +156,7 @@ void br_netfilter_rtable_init(struct net_bridge *br) rt->dst.dev = br->dev; rt->dst.path = &rt->dst; dst_init_metrics(&rt->dst, br_dst_default_metrics, true); - rt->dst.flags = DST_NOXFRM | DST_NOPEER; + rt->dst.flags = DST_NOXFRM | DST_NOPEER | DST_FAKE_RTABLE; rt->dst.ops = &fake_dst_ops; } @@ -694,11 +694,7 @@ static unsigned int br_nf_local_in(unsigned int hook, struct sk_buff *skb, const struct net_device *out, int (*okfn)(struct sk_buff *)) { - struct rtable *rt = skb_rtable(skb); - - if (rt && rt == bridge_parent_rtable(in)) - skb_dst_drop(skb); - + br_drop_fake_rtable(skb); return NF_ACCEPT; } diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c index 5c3c81a609e5..a7cad741df01 100644 --- a/net/core/drop_monitor.c +++ b/net/core/drop_monitor.c @@ -42,13 +42,14 @@ static void send_dm_alert(struct work_struct *unused); * netlink alerts */ static int trace_state = TRACE_OFF; -static DEFINE_SPINLOCK(trace_state_lock); +static DEFINE_MUTEX(trace_state_mutex); struct per_cpu_dm_data { struct work_struct dm_alert_work; - struct sk_buff *skb; + struct sk_buff __rcu *skb; atomic_t dm_hit_count; struct timer_list send_timer; + int cpu; }; struct dm_hw_stat_delta { @@ -79,29 +80,53 @@ static void reset_per_cpu_data(struct per_cpu_dm_data *data) size_t al; struct net_dm_alert_msg *msg; struct nlattr *nla; + struct sk_buff *skb; + struct sk_buff *oskb = rcu_dereference_protected(data->skb, 1); al = sizeof(struct net_dm_alert_msg); al += dm_hit_limit * sizeof(struct net_dm_drop_point); al += sizeof(struct nlattr); - data->skb = genlmsg_new(al, GFP_KERNEL); - genlmsg_put(data->skb, 0, 0, &net_drop_monitor_family, - 0, NET_DM_CMD_ALERT); - nla = nla_reserve(data->skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg)); - msg = nla_data(nla); - memset(msg, 0, al); - atomic_set(&data->dm_hit_count, dm_hit_limit); + skb = genlmsg_new(al, GFP_KERNEL); + + if (skb) { + genlmsg_put(skb, 0, 0, &net_drop_monitor_family, + 0, NET_DM_CMD_ALERT); + nla = nla_reserve(skb, NLA_UNSPEC, + sizeof(struct net_dm_alert_msg)); + msg = nla_data(nla); + memset(msg, 0, al); + } else + schedule_work_on(data->cpu, &data->dm_alert_work); + + /* + * Don't need to lock this, since we are guaranteed to only + * run this on a single cpu at a time. + * Note also that we only update data->skb if the old and new skb + * pointers don't match. This ensures that we don't continually call + * synchornize_rcu if we repeatedly fail to alloc a new netlink message. + */ + if (skb != oskb) { + rcu_assign_pointer(data->skb, skb); + + synchronize_rcu(); + + atomic_set(&data->dm_hit_count, dm_hit_limit); + } + } static void send_dm_alert(struct work_struct *unused) { struct sk_buff *skb; - struct per_cpu_dm_data *data = &__get_cpu_var(dm_cpu_data); + struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data); + + WARN_ON_ONCE(data->cpu != smp_processor_id()); /* * Grab the skb we're about to send */ - skb = data->skb; + skb = rcu_dereference_protected(data->skb, 1); /* * Replace it with a new one @@ -111,8 +136,10 @@ static void send_dm_alert(struct work_struct *unused) /* * Ship it! */ - genlmsg_multicast(skb, 0, NET_DM_GRP_ALERT, GFP_KERNEL); + if (skb) + genlmsg_multicast(skb, 0, NET_DM_GRP_ALERT, GFP_KERNEL); + put_cpu_var(dm_cpu_data); } /* @@ -123,9 +150,11 @@ static void send_dm_alert(struct work_struct *unused) */ static void sched_send_work(unsigned long unused) { - struct per_cpu_dm_data *data = &__get_cpu_var(dm_cpu_data); + struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data); + + schedule_work_on(smp_processor_id(), &data->dm_alert_work); - schedule_work(&data->dm_alert_work); + put_cpu_var(dm_cpu_data); } static void trace_drop_common(struct sk_buff *skb, void *location) @@ -134,8 +163,15 @@ static void trace_drop_common(struct sk_buff *skb, void *location) struct nlmsghdr *nlh; struct nlattr *nla; int i; - struct per_cpu_dm_data *data = &__get_cpu_var(dm_cpu_data); + struct sk_buff *dskb; + struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data); + + + rcu_read_lock(); + dskb = rcu_dereference(data->skb); + if (!dskb) + goto out; if (!atomic_add_unless(&data->dm_hit_count, -1, 0)) { /* @@ -144,7 +180,7 @@ static void trace_drop_common(struct sk_buff *skb, void *location) goto out; } - nlh = (struct nlmsghdr *)data->skb->data; + nlh = (struct nlmsghdr *)dskb->data; nla = genlmsg_data(nlmsg_data(nlh)); msg = nla_data(nla); for (i = 0; i < msg->entries; i++) { @@ -158,7 +194,7 @@ static void trace_drop_common(struct sk_buff *skb, void *location) /* * We need to create a new entry */ - __nla_reserve_nohdr(data->skb, sizeof(struct net_dm_drop_point)); + __nla_reserve_nohdr(dskb, sizeof(struct net_dm_drop_point)); nla->nla_len += NLA_ALIGN(sizeof(struct net_dm_drop_point)); memcpy(msg->points[msg->entries].pc, &location, sizeof(void *)); msg->points[msg->entries].count = 1; @@ -170,6 +206,8 @@ static void trace_drop_common(struct sk_buff *skb, void *location) } out: + rcu_read_unlock(); + put_cpu_var(dm_cpu_data); return; } @@ -214,7 +252,7 @@ static int set_all_monitor_traces(int state) struct dm_hw_stat_delta *new_stat = NULL; struct dm_hw_stat_delta *temp; - spin_lock(&trace_state_lock); + mutex_lock(&trace_state_mutex); if (state == trace_state) { rc = -EAGAIN; @@ -253,7 +291,7 @@ static int set_all_monitor_traces(int state) rc = -EINPROGRESS; out_unlock: - spin_unlock(&trace_state_lock); + mutex_unlock(&trace_state_mutex); return rc; } @@ -296,12 +334,12 @@ static int dropmon_net_event(struct notifier_block *ev_block, new_stat->dev = dev; new_stat->last_rx = jiffies; - spin_lock(&trace_state_lock); + mutex_lock(&trace_state_mutex); list_add_rcu(&new_stat->list, &hw_stats_list); - spin_unlock(&trace_state_lock); + mutex_unlock(&trace_state_mutex); break; case NETDEV_UNREGISTER: - spin_lock(&trace_state_lock); + mutex_lock(&trace_state_mutex); list_for_each_entry_safe(new_stat, tmp, &hw_stats_list, list) { if (new_stat->dev == dev) { new_stat->dev = NULL; @@ -312,7 +350,7 @@ static int dropmon_net_event(struct notifier_block *ev_block, } } } - spin_unlock(&trace_state_lock); + mutex_unlock(&trace_state_mutex); break; } out: @@ -368,13 +406,15 @@ static int __init init_net_drop_monitor(void) for_each_present_cpu(cpu) { data = &per_cpu(dm_cpu_data, cpu); - reset_per_cpu_data(data); + data->cpu = cpu; INIT_WORK(&data->dm_alert_work, send_dm_alert); init_timer(&data->send_timer); data->send_timer.data = cpu; data->send_timer.function = sched_send_work; + reset_per_cpu_data(data); } + goto out; out_unreg: diff --git a/net/ieee802154/6lowpan.c b/net/ieee802154/6lowpan.c index 368515885368..840821b90bcd 100644 --- a/net/ieee802154/6lowpan.c +++ b/net/ieee802154/6lowpan.c @@ -1044,6 +1044,24 @@ static void lowpan_dev_free(struct net_device *dev) free_netdev(dev); } +static struct wpan_phy *lowpan_get_phy(const struct net_device *dev) +{ + struct net_device *real_dev = lowpan_dev_info(dev)->real_dev; + return ieee802154_mlme_ops(real_dev)->get_phy(real_dev); +} + +static u16 lowpan_get_pan_id(const struct net_device *dev) +{ + struct net_device *real_dev = lowpan_dev_info(dev)->real_dev; + return ieee802154_mlme_ops(real_dev)->get_pan_id(real_dev); +} + +static u16 lowpan_get_short_addr(const struct net_device *dev) +{ + struct net_device *real_dev = lowpan_dev_info(dev)->real_dev; + return ieee802154_mlme_ops(real_dev)->get_short_addr(real_dev); +} + static struct header_ops lowpan_header_ops = { .create = lowpan_header_create, }; @@ -1053,6 +1071,12 @@ static const struct net_device_ops lowpan_netdev_ops = { .ndo_set_mac_address = eth_mac_addr, }; +static struct ieee802154_mlme_ops lowpan_mlme = { + .get_pan_id = lowpan_get_pan_id, + .get_phy = lowpan_get_phy, + .get_short_addr = lowpan_get_short_addr, +}; + static void lowpan_setup(struct net_device *dev) { pr_debug("(%s)\n", __func__); @@ -1070,6 +1094,7 @@ static void lowpan_setup(struct net_device *dev) dev->netdev_ops = &lowpan_netdev_ops; dev->header_ops = &lowpan_header_ops; + dev->ml_priv = &lowpan_mlme; dev->destructor = lowpan_dev_free; } @@ -1143,6 +1168,8 @@ static int lowpan_newlink(struct net *src_net, struct net_device *dev, list_add_tail(&entry->list, &lowpan_devices); mutex_unlock(&lowpan_dev_info(dev)->dev_list_mtx); + spin_lock_init(&flist_lock); + register_netdevice(dev); return 0; @@ -1152,11 +1179,20 @@ static void lowpan_dellink(struct net_device *dev, struct list_head *head) { struct lowpan_dev_info *lowpan_dev = lowpan_dev_info(dev); struct net_device *real_dev = lowpan_dev->real_dev; - struct lowpan_dev_record *entry; - struct lowpan_dev_record *tmp; + struct lowpan_dev_record *entry, *tmp; + struct lowpan_fragment *frame, *tframe; ASSERT_RTNL(); + spin_lock(&flist_lock); + list_for_each_entry_safe(frame, tframe, &lowpan_fragments, list) { + del_timer(&frame->timer); + list_del(&frame->list); + dev_kfree_skb(frame->skb); + kfree(frame); + } + spin_unlock(&flist_lock); + mutex_lock(&lowpan_dev_info(dev)->dev_list_mtx); list_for_each_entry_safe(entry, tmp, &lowpan_devices, list) { if (entry->ldev == dev) { diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c index 8d25a1c557eb..8f8db724bfaf 100644 --- a/net/ipv4/inet_diag.c +++ b/net/ipv4/inet_diag.c @@ -141,7 +141,7 @@ int inet_sk_diag_fill(struct sock *sk, struct inet_connection_sock *icsk, goto rtattr_failure; if (icsk == NULL) { - r->idiag_rqueue = r->idiag_wqueue = 0; + handler->idiag_get_info(sk, r, NULL); goto out; } diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 8bb6adeb62c0..1272a88c2a63 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -3243,7 +3243,7 @@ void __init tcp_init(void) { struct sk_buff *skb = NULL; unsigned long limit; - int max_share, cnt; + int max_rshare, max_wshare, cnt; unsigned int i; unsigned long jiffy = jiffies; @@ -3303,15 +3303,16 @@ void __init tcp_init(void) tcp_init_mem(&init_net); /* Set per-socket limits to no more than 1/128 the pressure threshold */ limit = nr_free_buffer_pages() << (PAGE_SHIFT - 7); - max_share = min(4UL*1024*1024, limit); + max_wshare = min(4UL*1024*1024, limit); + max_rshare = min(6UL*1024*1024, limit); sysctl_tcp_wmem[0] = SK_MEM_QUANTUM; sysctl_tcp_wmem[1] = 16*1024; - sysctl_tcp_wmem[2] = max(64*1024, max_share); + sysctl_tcp_wmem[2] = max(64*1024, max_wshare); sysctl_tcp_rmem[0] = SK_MEM_QUANTUM; sysctl_tcp_rmem[1] = 87380; - sysctl_tcp_rmem[2] = max(87380, max_share); + sysctl_tcp_rmem[2] = max(87380, max_rshare); pr_info("Hash tables configured (established %u bind %u)\n", tcp_hashinfo.ehash_mask + 1, tcp_hashinfo.bhash_size); diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 3ff364065376..257b61789eeb 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -85,7 +85,7 @@ int sysctl_tcp_ecn __read_mostly = 2; EXPORT_SYMBOL(sysctl_tcp_ecn); int sysctl_tcp_dsack __read_mostly = 1; int sysctl_tcp_app_win __read_mostly = 31; -int sysctl_tcp_adv_win_scale __read_mostly = 2; +int sysctl_tcp_adv_win_scale __read_mostly = 1; EXPORT_SYMBOL(sysctl_tcp_adv_win_scale); int sysctl_tcp_stdurg __read_mostly; @@ -495,7 +495,7 @@ static inline void tcp_rcv_rtt_measure(struct tcp_sock *tp) goto new_measure; if (before(tp->rcv_nxt, tp->rcv_rtt_est.seq)) return; - tcp_rcv_rtt_update(tp, jiffies - tp->rcv_rtt_est.time, 1); + tcp_rcv_rtt_update(tp, tcp_time_stamp - tp->rcv_rtt_est.time, 1); new_measure: tp->rcv_rtt_est.seq = tp->rcv_nxt + tp->rcv_wnd; @@ -2868,11 +2868,14 @@ static inline void tcp_complete_cwr(struct sock *sk) /* Do not moderate cwnd if it's already undone in cwr or recovery. */ if (tp->undo_marker) { - if (inet_csk(sk)->icsk_ca_state == TCP_CA_CWR) + if (inet_csk(sk)->icsk_ca_state == TCP_CA_CWR) { tp->snd_cwnd = min(tp->snd_cwnd, tp->snd_ssthresh); - else /* PRR */ + tp->snd_cwnd_stamp = tcp_time_stamp; + } else if (tp->snd_ssthresh < TCP_INFINITE_SSTHRESH) { + /* PRR algorithm. */ tp->snd_cwnd = tp->snd_ssthresh; - tp->snd_cwnd_stamp = tcp_time_stamp; + tp->snd_cwnd_stamp = tcp_time_stamp; + } } tcp_ca_event(sk, CA_EVENT_COMPLETE_CWR); } diff --git a/net/ipv4/udp_diag.c b/net/ipv4/udp_diag.c index 8a949f19deb6..a7f86a3cd502 100644 --- a/net/ipv4/udp_diag.c +++ b/net/ipv4/udp_diag.c @@ -146,9 +146,17 @@ static int udp_diag_dump_one(struct sk_buff *in_skb, const struct nlmsghdr *nlh, return udp_dump_one(&udp_table, in_skb, nlh, req); } +static void udp_diag_get_info(struct sock *sk, struct inet_diag_msg *r, + void *info) +{ + r->idiag_rqueue = sk_rmem_alloc_get(sk); + r->idiag_wqueue = sk_wmem_alloc_get(sk); +} + static const struct inet_diag_handler udp_diag_handler = { .dump = udp_diag_dump, .dump_one = udp_diag_dump_one, + .idiag_get_info = udp_diag_get_info, .idiag_type = IPPROTO_UDP, }; @@ -167,6 +175,7 @@ static int udplite_diag_dump_one(struct sk_buff *in_skb, const struct nlmsghdr * static const struct inet_diag_handler udplite_diag_handler = { .dump = udplite_diag_dump, .dump_one = udplite_diag_dump_one, + .idiag_get_info = udp_diag_get_info, .idiag_type = IPPROTO_UDPLITE, }; diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c index 585d93ecee2d..6274f0be82b0 100644 --- a/net/l2tp/l2tp_ip.c +++ b/net/l2tp/l2tp_ip.c @@ -442,8 +442,9 @@ static int l2tp_ip_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *m daddr = lip->l2tp_addr.s_addr; } else { + rc = -EDESTADDRREQ; if (sk->sk_state != TCP_ESTABLISHED) - return -EDESTADDRREQ; + goto out; daddr = inet->inet_daddr; connected = 1; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index d9798a307f20..db8fae51714c 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1210,7 +1210,7 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb); void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata); void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata); -void ieee80211_mgd_teardown(struct ieee80211_sub_if_data *sdata); +void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata); /* IBSS code */ void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local); diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 401c01f0731e..c20051b7ffcd 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -486,6 +486,8 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, /* free all potentially still buffered bcast frames */ local->total_ps_buffered -= skb_queue_len(&sdata->u.ap.ps_bc_buf); skb_queue_purge(&sdata->u.ap.ps_bc_buf); + } else if (sdata->vif.type == NL80211_IFTYPE_STATION) { + ieee80211_mgd_stop(sdata); } if (going_down) @@ -644,8 +646,6 @@ static void ieee80211_teardown_sdata(struct net_device *dev) if (ieee80211_vif_is_mesh(&sdata->vif)) mesh_rmc_free(sdata); - else if (sdata->vif.type == NL80211_IFTYPE_STATION) - ieee80211_mgd_teardown(sdata); flushed = sta_info_flush(local, sdata); WARN_ON(flushed); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index f76da5b3f5c5..20c680bfc3ae 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3497,7 +3497,7 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata, return 0; } -void ieee80211_mgd_teardown(struct ieee80211_sub_if_data *sdata) +void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 782a60198df4..e76facc69e95 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1158,7 +1158,8 @@ ieee80211_tx_prepare(struct ieee80211_sub_if_data *sdata, tx->sta = rcu_dereference(sdata->u.vlan.sta); if (!tx->sta && sdata->dev->ieee80211_ptr->use_4addr) return TX_DROP; - } else if (info->flags & IEEE80211_TX_CTL_INJECTED) { + } else if (info->flags & IEEE80211_TX_CTL_INJECTED || + tx->sdata->control_port_protocol == tx->skb->protocol) { tx->sta = sta_info_get_bss(sdata, hdr->addr1); } if (!tx->sta) diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c index 2555816e7788..00bdb1d9d690 100644 --- a/net/netfilter/ipvs/ip_vs_core.c +++ b/net/netfilter/ipvs/ip_vs_core.c @@ -1924,6 +1924,7 @@ protocol_fail: control_fail: ip_vs_estimator_net_cleanup(net); estimator_fail: + net->ipvs = NULL; return -ENOMEM; } @@ -1936,6 +1937,7 @@ static void __net_exit __ip_vs_cleanup(struct net *net) ip_vs_control_net_cleanup(net); ip_vs_estimator_net_cleanup(net); IP_VS_DBG(2, "ipvs netns %d released\n", net_ipvs(net)->gen); + net->ipvs = NULL; } static void __net_exit __ip_vs_dev_cleanup(struct net *net) @@ -1993,10 +1995,18 @@ static int __init ip_vs_init(void) goto cleanup_dev; } + ret = ip_vs_register_nl_ioctl(); + if (ret < 0) { + pr_err("can't register netlink/ioctl.\n"); + goto cleanup_hooks; + } + pr_info("ipvs loaded.\n"); return ret; +cleanup_hooks: + nf_unregister_hooks(ip_vs_ops, ARRAY_SIZE(ip_vs_ops)); cleanup_dev: unregister_pernet_device(&ipvs_core_dev_ops); cleanup_sub: @@ -2012,6 +2022,7 @@ exit: static void __exit ip_vs_cleanup(void) { + ip_vs_unregister_nl_ioctl(); nf_unregister_hooks(ip_vs_ops, ARRAY_SIZE(ip_vs_ops)); unregister_pernet_device(&ipvs_core_dev_ops); unregister_pernet_subsys(&ipvs_core_ops); /* free ip_vs struct */ diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index b3afe189af61..f5589987fc80 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -3680,7 +3680,7 @@ int __net_init ip_vs_control_net_init_sysctl(struct net *net) return 0; } -void __net_init ip_vs_control_net_cleanup_sysctl(struct net *net) +void __net_exit ip_vs_control_net_cleanup_sysctl(struct net *net) { struct netns_ipvs *ipvs = net_ipvs(net); @@ -3692,7 +3692,7 @@ void __net_init ip_vs_control_net_cleanup_sysctl(struct net *net) #else int __net_init ip_vs_control_net_init_sysctl(struct net *net) { return 0; } -void __net_init ip_vs_control_net_cleanup_sysctl(struct net *net) { } +void __net_exit ip_vs_control_net_cleanup_sysctl(struct net *net) { } #endif @@ -3750,21 +3750,10 @@ void __net_exit ip_vs_control_net_cleanup(struct net *net) free_percpu(ipvs->tot_stats.cpustats); } -int __init ip_vs_control_init(void) +int __init ip_vs_register_nl_ioctl(void) { - int idx; int ret; - EnterFunction(2); - - /* Initialize svc_table, ip_vs_svc_fwm_table, rs_table */ - for(idx = 0; idx < IP_VS_SVC_TAB_SIZE; idx++) { - INIT_LIST_HEAD(&ip_vs_svc_table[idx]); - INIT_LIST_HEAD(&ip_vs_svc_fwm_table[idx]); - } - - smp_wmb(); /* Do we really need it now ? */ - ret = nf_register_sockopt(&ip_vs_sockopts); if (ret) { pr_err("cannot register sockopt.\n"); @@ -3776,28 +3765,47 @@ int __init ip_vs_control_init(void) pr_err("cannot register Generic Netlink interface.\n"); goto err_genl; } - - ret = register_netdevice_notifier(&ip_vs_dst_notifier); - if (ret < 0) - goto err_notf; - - LeaveFunction(2); return 0; -err_notf: - ip_vs_genl_unregister(); err_genl: nf_unregister_sockopt(&ip_vs_sockopts); err_sock: return ret; } +void ip_vs_unregister_nl_ioctl(void) +{ + ip_vs_genl_unregister(); + nf_unregister_sockopt(&ip_vs_sockopts); +} + +int __init ip_vs_control_init(void) +{ + int idx; + int ret; + + EnterFunction(2); + + /* Initialize svc_table, ip_vs_svc_fwm_table, rs_table */ + for (idx = 0; idx < IP_VS_SVC_TAB_SIZE; idx++) { + INIT_LIST_HEAD(&ip_vs_svc_table[idx]); + INIT_LIST_HEAD(&ip_vs_svc_fwm_table[idx]); + } + + smp_wmb(); /* Do we really need it now ? */ + + ret = register_netdevice_notifier(&ip_vs_dst_notifier); + if (ret < 0) + return ret; + + LeaveFunction(2); + return 0; +} + void ip_vs_control_cleanup(void) { EnterFunction(2); unregister_netdevice_notifier(&ip_vs_dst_notifier); - ip_vs_genl_unregister(); - nf_unregister_sockopt(&ip_vs_sockopts); LeaveFunction(2); } diff --git a/net/netfilter/ipvs/ip_vs_ftp.c b/net/netfilter/ipvs/ip_vs_ftp.c index 538d74ee4f68..e39f693dd3e4 100644 --- a/net/netfilter/ipvs/ip_vs_ftp.c +++ b/net/netfilter/ipvs/ip_vs_ftp.c @@ -439,6 +439,8 @@ static int __net_init __ip_vs_ftp_init(struct net *net) struct ip_vs_app *app; struct netns_ipvs *ipvs = net_ipvs(net); + if (!ipvs) + return -ENOENT; app = kmemdup(&ip_vs_ftp, sizeof(struct ip_vs_app), GFP_KERNEL); if (!app) return -ENOMEM; diff --git a/net/netfilter/ipvs/ip_vs_lblc.c b/net/netfilter/ipvs/ip_vs_lblc.c index 0f16283fd058..caa43704e55e 100644 --- a/net/netfilter/ipvs/ip_vs_lblc.c +++ b/net/netfilter/ipvs/ip_vs_lblc.c @@ -551,6 +551,9 @@ static int __net_init __ip_vs_lblc_init(struct net *net) { struct netns_ipvs *ipvs = net_ipvs(net); + if (!ipvs) + return -ENOENT; + if (!net_eq(net, &init_net)) { ipvs->lblc_ctl_table = kmemdup(vs_vars_table, sizeof(vs_vars_table), diff --git a/net/netfilter/ipvs/ip_vs_lblcr.c b/net/netfilter/ipvs/ip_vs_lblcr.c index eec797f8cce7..548bf37aa29e 100644 --- a/net/netfilter/ipvs/ip_vs_lblcr.c +++ b/net/netfilter/ipvs/ip_vs_lblcr.c @@ -745,6 +745,9 @@ static int __net_init __ip_vs_lblcr_init(struct net *net) { struct netns_ipvs *ipvs = net_ipvs(net); + if (!ipvs) + return -ENOENT; + if (!net_eq(net, &init_net)) { ipvs->lblcr_ctl_table = kmemdup(vs_vars_table, sizeof(vs_vars_table), diff --git a/net/netfilter/ipvs/ip_vs_proto.c b/net/netfilter/ipvs/ip_vs_proto.c index f843a8833250..ed835e67a07e 100644 --- a/net/netfilter/ipvs/ip_vs_proto.c +++ b/net/netfilter/ipvs/ip_vs_proto.c @@ -59,9 +59,6 @@ static int __used __init register_ip_vs_protocol(struct ip_vs_protocol *pp) return 0; } -#if defined(CONFIG_IP_VS_PROTO_TCP) || defined(CONFIG_IP_VS_PROTO_UDP) || \ - defined(CONFIG_IP_VS_PROTO_SCTP) || defined(CONFIG_IP_VS_PROTO_AH) || \ - defined(CONFIG_IP_VS_PROTO_ESP) /* * register an ipvs protocols netns related data */ @@ -81,12 +78,18 @@ register_ip_vs_proto_netns(struct net *net, struct ip_vs_protocol *pp) ipvs->proto_data_table[hash] = pd; atomic_set(&pd->appcnt, 0); /* Init app counter */ - if (pp->init_netns != NULL) - pp->init_netns(net, pd); + if (pp->init_netns != NULL) { + int ret = pp->init_netns(net, pd); + if (ret) { + /* unlink an free proto data */ + ipvs->proto_data_table[hash] = pd->next; + kfree(pd); + return ret; + } + } return 0; } -#endif /* * unregister an ipvs protocol @@ -316,22 +319,35 @@ ip_vs_tcpudp_debug_packet(int af, struct ip_vs_protocol *pp, */ int __net_init ip_vs_protocol_net_init(struct net *net) { + int i, ret; + static struct ip_vs_protocol *protos[] = { #ifdef CONFIG_IP_VS_PROTO_TCP - register_ip_vs_proto_netns(net, &ip_vs_protocol_tcp); + &ip_vs_protocol_tcp, #endif #ifdef CONFIG_IP_VS_PROTO_UDP - register_ip_vs_proto_netns(net, &ip_vs_protocol_udp); + &ip_vs_protocol_udp, #endif #ifdef CONFIG_IP_VS_PROTO_SCTP - register_ip_vs_proto_netns(net, &ip_vs_protocol_sctp); + &ip_vs_protocol_sctp, #endif #ifdef CONFIG_IP_VS_PROTO_AH - register_ip_vs_proto_netns(net, &ip_vs_protocol_ah); + &ip_vs_protocol_ah, #endif #ifdef CONFIG_IP_VS_PROTO_ESP - register_ip_vs_proto_netns(net, &ip_vs_protocol_esp); + &ip_vs_protocol_esp, #endif + }; + + for (i = 0; i < ARRAY_SIZE(protos); i++) { + ret = register_ip_vs_proto_netns(net, protos[i]); + if (ret < 0) + goto cleanup; + } return 0; + +cleanup: + ip_vs_protocol_net_cleanup(net); + return ret; } void __net_exit ip_vs_protocol_net_cleanup(struct net *net) diff --git a/net/netfilter/ipvs/ip_vs_proto_sctp.c b/net/netfilter/ipvs/ip_vs_proto_sctp.c index 1fbf7a2816f5..9f3fb751c491 100644 --- a/net/netfilter/ipvs/ip_vs_proto_sctp.c +++ b/net/netfilter/ipvs/ip_vs_proto_sctp.c @@ -1090,7 +1090,7 @@ out: * timeouts is netns related now. * --------------------------------------------- */ -static void __ip_vs_sctp_init(struct net *net, struct ip_vs_proto_data *pd) +static int __ip_vs_sctp_init(struct net *net, struct ip_vs_proto_data *pd) { struct netns_ipvs *ipvs = net_ipvs(net); @@ -1098,6 +1098,9 @@ static void __ip_vs_sctp_init(struct net *net, struct ip_vs_proto_data *pd) spin_lock_init(&ipvs->sctp_app_lock); pd->timeout_table = ip_vs_create_timeout_table((int *)sctp_timeouts, sizeof(sctp_timeouts)); + if (!pd->timeout_table) + return -ENOMEM; + return 0; } static void __ip_vs_sctp_exit(struct net *net, struct ip_vs_proto_data *pd) diff --git a/net/netfilter/ipvs/ip_vs_proto_tcp.c b/net/netfilter/ipvs/ip_vs_proto_tcp.c index ef8641f7af83..cd609cc62721 100644 --- a/net/netfilter/ipvs/ip_vs_proto_tcp.c +++ b/net/netfilter/ipvs/ip_vs_proto_tcp.c @@ -677,7 +677,7 @@ void ip_vs_tcp_conn_listen(struct net *net, struct ip_vs_conn *cp) * timeouts is netns related now. * --------------------------------------------- */ -static void __ip_vs_tcp_init(struct net *net, struct ip_vs_proto_data *pd) +static int __ip_vs_tcp_init(struct net *net, struct ip_vs_proto_data *pd) { struct netns_ipvs *ipvs = net_ipvs(net); @@ -685,7 +685,10 @@ static void __ip_vs_tcp_init(struct net *net, struct ip_vs_proto_data *pd) spin_lock_init(&ipvs->tcp_app_lock); pd->timeout_table = ip_vs_create_timeout_table((int *)tcp_timeouts, sizeof(tcp_timeouts)); + if (!pd->timeout_table) + return -ENOMEM; pd->tcp_state_table = tcp_states; + return 0; } static void __ip_vs_tcp_exit(struct net *net, struct ip_vs_proto_data *pd) diff --git a/net/netfilter/ipvs/ip_vs_proto_udp.c b/net/netfilter/ipvs/ip_vs_proto_udp.c index f4b7262896bb..2fedb2dcb3d1 100644 --- a/net/netfilter/ipvs/ip_vs_proto_udp.c +++ b/net/netfilter/ipvs/ip_vs_proto_udp.c @@ -467,7 +467,7 @@ udp_state_transition(struct ip_vs_conn *cp, int direction, cp->timeout = pd->timeout_table[IP_VS_UDP_S_NORMAL]; } -static void __udp_init(struct net *net, struct ip_vs_proto_data *pd) +static int __udp_init(struct net *net, struct ip_vs_proto_data *pd) { struct netns_ipvs *ipvs = net_ipvs(net); @@ -475,6 +475,9 @@ static void __udp_init(struct net *net, struct ip_vs_proto_data *pd) spin_lock_init(&ipvs->udp_app_lock); pd->timeout_table = ip_vs_create_timeout_table((int *)udp_timeouts, sizeof(udp_timeouts)); + if (!pd->timeout_table) + return -ENOMEM; + return 0; } static void __udp_exit(struct net *net, struct ip_vs_proto_data *pd) diff --git a/net/netfilter/xt_CT.c b/net/netfilter/xt_CT.c index 59530e93fa58..3746d8b9a478 100644 --- a/net/netfilter/xt_CT.c +++ b/net/netfilter/xt_CT.c @@ -227,7 +227,7 @@ static int xt_ct_tg_check_v1(const struct xt_tgchk_param *par) } #ifdef CONFIG_NF_CONNTRACK_TIMEOUT - if (info->timeout) { + if (info->timeout[0]) { typeof(nf_ct_timeout_find_get_hook) timeout_find_get; struct nf_conn_timeout *timeout_ext; diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index 5da548fa7ae9..ebd22966f748 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -408,10 +408,8 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch) if (q->corrupt && q->corrupt >= get_crandom(&q->corrupt_cor)) { if (!(skb = skb_unshare(skb, GFP_ATOMIC)) || (skb->ip_summed == CHECKSUM_PARTIAL && - skb_checksum_help(skb))) { - sch->qstats.drops++; - return NET_XMIT_DROP; - } + skb_checksum_help(skb))) + return qdisc_drop(skb, sch); skb->data[net_random() % skb_headlen(skb)] ^= 1<<(net_random() % 8); } diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 67972462a543..adf2990acebf 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -176,16 +176,22 @@ rpc_setup_pipedir(struct rpc_clnt *clnt, const char *dir_name) return 0; } -static int __rpc_pipefs_event(struct rpc_clnt *clnt, unsigned long event, - struct super_block *sb) +static inline int rpc_clnt_skip_event(struct rpc_clnt *clnt, unsigned long event) +{ + if (((event == RPC_PIPEFS_MOUNT) && clnt->cl_dentry) || + ((event == RPC_PIPEFS_UMOUNT) && !clnt->cl_dentry)) + return 1; + return 0; +} + +static int __rpc_clnt_handle_event(struct rpc_clnt *clnt, unsigned long event, + struct super_block *sb) { struct dentry *dentry; int err = 0; switch (event) { case RPC_PIPEFS_MOUNT: - if (clnt->cl_program->pipe_dir_name == NULL) - break; dentry = rpc_setup_pipedir_sb(sb, clnt, clnt->cl_program->pipe_dir_name); BUG_ON(dentry == NULL); @@ -208,6 +214,20 @@ static int __rpc_pipefs_event(struct rpc_clnt *clnt, unsigned long event, return err; } +static int __rpc_pipefs_event(struct rpc_clnt *clnt, unsigned long event, + struct super_block *sb) +{ + int error = 0; + + for (;; clnt = clnt->cl_parent) { + if (!rpc_clnt_skip_event(clnt, event)) + error = __rpc_clnt_handle_event(clnt, event, sb); + if (error || clnt == clnt->cl_parent) + break; + } + return error; +} + static struct rpc_clnt *rpc_get_client_for_event(struct net *net, int event) { struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); @@ -215,10 +235,12 @@ static struct rpc_clnt *rpc_get_client_for_event(struct net *net, int event) spin_lock(&sn->rpc_client_lock); list_for_each_entry(clnt, &sn->all_clients, cl_clients) { - if (((event == RPC_PIPEFS_MOUNT) && clnt->cl_dentry) || - ((event == RPC_PIPEFS_UMOUNT) && !clnt->cl_dentry)) + if (clnt->cl_program->pipe_dir_name == NULL) + break; + if (rpc_clnt_skip_event(clnt, event)) + continue; + if (atomic_inc_not_zero(&clnt->cl_count) == 0) continue; - atomic_inc(&clnt->cl_count); spin_unlock(&sn->rpc_client_lock); return clnt; } @@ -257,6 +279,14 @@ void rpc_clients_notifier_unregister(void) return rpc_pipefs_notifier_unregister(&rpc_clients_block); } +static void rpc_clnt_set_nodename(struct rpc_clnt *clnt, const char *nodename) +{ + clnt->cl_nodelen = strlen(nodename); + if (clnt->cl_nodelen > UNX_MAXNODENAME) + clnt->cl_nodelen = UNX_MAXNODENAME; + memcpy(clnt->cl_nodename, nodename, clnt->cl_nodelen); +} + static struct rpc_clnt * rpc_new_client(const struct rpc_create_args *args, struct rpc_xprt *xprt) { const struct rpc_program *program = args->program; @@ -337,10 +367,7 @@ static struct rpc_clnt * rpc_new_client(const struct rpc_create_args *args, stru } /* save the nodename */ - clnt->cl_nodelen = strlen(init_utsname()->nodename); - if (clnt->cl_nodelen > UNX_MAXNODENAME) - clnt->cl_nodelen = UNX_MAXNODENAME; - memcpy(clnt->cl_nodename, init_utsname()->nodename, clnt->cl_nodelen); + rpc_clnt_set_nodename(clnt, utsname()->nodename); rpc_register_client(clnt); return clnt; @@ -499,6 +526,7 @@ rpc_clone_client(struct rpc_clnt *clnt) err = rpc_setup_pipedir(new, clnt->cl_program->pipe_dir_name); if (err != 0) goto out_no_path; + rpc_clnt_set_nodename(new, utsname()->nodename); if (new->cl_auth) atomic_inc(&new->cl_auth->au_count); atomic_inc(&clnt->cl_count); diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index 0af37fc46818..3b62cf288031 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -1126,19 +1126,20 @@ rpc_fill_super(struct super_block *sb, void *data, int silent) return -ENOMEM; dprintk("RPC: sending pipefs MOUNT notification for net %p%s\n", net, NET_NAME(net)); + sn->pipefs_sb = sb; err = blocking_notifier_call_chain(&rpc_pipefs_notifier_list, RPC_PIPEFS_MOUNT, sb); if (err) goto err_depopulate; sb->s_fs_info = get_net(net); - sn->pipefs_sb = sb; return 0; err_depopulate: blocking_notifier_call_chain(&rpc_pipefs_notifier_list, RPC_PIPEFS_UMOUNT, sb); + sn->pipefs_sb = NULL; __rpc_depopulate(root, files, RPCAUTH_lockd, RPCAUTH_RootEOF); return err; } diff --git a/sound/soc/blackfin/bf5xx-ssm2602.c b/sound/soc/blackfin/bf5xx-ssm2602.c index df3ac73f8778..b39ad356b92b 100644 --- a/sound/soc/blackfin/bf5xx-ssm2602.c +++ b/sound/soc/blackfin/bf5xx-ssm2602.c @@ -99,6 +99,7 @@ static struct snd_soc_dai_link bf5xx_ssm2602_dai[] = { .platform_name = "bfin-i2s-pcm-audio", .codec_name = "ssm2602.0-001b", .ops = &bf5xx_ssm2602_ops, + .dai_fmt = BF5XX_SSM2602_DAIFMT, }, { .name = "ssm2602", @@ -108,6 +109,7 @@ static struct snd_soc_dai_link bf5xx_ssm2602_dai[] = { .platform_name = "bfin-i2s-pcm-audio", .codec_name = "ssm2602.0-001b", .ops = &bf5xx_ssm2602_ops, + .dai_fmt = BF5XX_SSM2602_DAIFMT, }, }; diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c index 16d55f91a653..df1e07ffac32 100644 --- a/sound/soc/codecs/tlv320aic23.c +++ b/sound/soc/codecs/tlv320aic23.c @@ -472,7 +472,7 @@ static int tlv320aic23_set_dai_sysclk(struct snd_soc_dai *codec_dai, static int tlv320aic23_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { - u16 reg = snd_soc_read(codec, TLV320AIC23_PWR) & 0xff7f; + u16 reg = snd_soc_read(codec, TLV320AIC23_PWR) & 0x17f; switch (level) { case SND_SOC_BIAS_ON: @@ -491,7 +491,7 @@ static int tlv320aic23_set_bias_level(struct snd_soc_codec *codec, case SND_SOC_BIAS_OFF: /* everything off, dac mute, inactive */ snd_soc_write(codec, TLV320AIC23_ACTIVE, 0x0); - snd_soc_write(codec, TLV320AIC23_PWR, 0xffff); + snd_soc_write(codec, TLV320AIC23_PWR, 0x1ff); break; } codec->dapm.bias_level = level; diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index 8c4c9591ec05..aa12c6b6beeb 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -60,7 +60,7 @@ struct wm8350_jack_data { }; struct wm8350_data { - struct snd_soc_codec codec; + struct wm8350 *wm8350; struct wm8350_output out1; struct wm8350_output out2; struct wm8350_jack_data hpl; @@ -1309,7 +1309,7 @@ static void wm8350_hp_work(struct wm8350_data *priv, struct wm8350_jack_data *jack, u16 mask) { - struct wm8350 *wm8350 = priv->codec.control_data; + struct wm8350 *wm8350 = priv->wm8350; u16 reg; int report; @@ -1342,7 +1342,7 @@ static void wm8350_hpr_work(struct work_struct *work) static irqreturn_t wm8350_hp_jack_handler(int irq, void *data) { struct wm8350_data *priv = data; - struct wm8350 *wm8350 = priv->codec.control_data; + struct wm8350 *wm8350 = priv->wm8350; struct wm8350_jack_data *jack = NULL; switch (irq - wm8350->irq_base) { @@ -1427,7 +1427,7 @@ EXPORT_SYMBOL_GPL(wm8350_hp_jack_detect); static irqreturn_t wm8350_mic_handler(int irq, void *data) { struct wm8350_data *priv = data; - struct wm8350 *wm8350 = priv->codec.control_data; + struct wm8350 *wm8350 = priv->wm8350; u16 reg; int report = 0; @@ -1536,6 +1536,8 @@ static int wm8350_codec_probe(struct snd_soc_codec *codec) return -ENOMEM; snd_soc_codec_set_drvdata(codec, priv); + priv->wm8350 = wm8350; + for (i = 0; i < ARRAY_SIZE(supply_names); i++) priv->supplies[i].supply = supply_names[i]; @@ -1544,7 +1546,6 @@ static int wm8350_codec_probe(struct snd_soc_codec *codec) if (ret != 0) return ret; - wm8350->codec.codec = codec; codec->control_data = wm8350; /* Put the codec into reset if it wasn't already */ diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index f13f2886339c..6c028c470601 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -1035,7 +1035,7 @@ void wm_hubs_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec); - int val; + int mask, val; switch (level) { case SND_SOC_BIAS_STANDBY: @@ -1047,6 +1047,13 @@ void wm_hubs_set_bias_level(struct snd_soc_codec *codec, case SND_SOC_BIAS_ON: /* Turn off any unneded single ended outputs */ val = 0; + mask = 0; + + if (hubs->lineout1_se) + mask |= WM8993_LINEOUT1N_ENA | WM8993_LINEOUT1P_ENA; + + if (hubs->lineout2_se) + mask |= WM8993_LINEOUT2N_ENA | WM8993_LINEOUT2P_ENA; if (hubs->lineout1_se && hubs->lineout1n_ena) val |= WM8993_LINEOUT1N_ENA; @@ -1061,11 +1068,7 @@ void wm_hubs_set_bias_level(struct snd_soc_codec *codec, val |= WM8993_LINEOUT2P_ENA; snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_3, - WM8993_LINEOUT1N_ENA | - WM8993_LINEOUT1P_ENA | - WM8993_LINEOUT2N_ENA | - WM8993_LINEOUT2P_ENA, - val); + mask, val); /* Remove the input clamps */ snd_soc_update_bits(codec, WM8993_INPUTS_CLAMP_REG, diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c index a59bd352d342..5a649da9122a 100644 --- a/sound/soc/omap/omap-pcm.c +++ b/sound/soc/omap/omap-pcm.c @@ -401,6 +401,10 @@ static int omap_pcm_new(struct snd_soc_pcm_runtime *rtd) } out: + /* free preallocated buffers in case of error */ + if (ret) + omap_pcm_free_dma_buffers(pcm); + return ret; } diff --git a/sound/soc/samsung/s3c2412-i2s.c b/sound/soc/samsung/s3c2412-i2s.c index 72185078ddf8..79fbeea99d46 100644 --- a/sound/soc/samsung/s3c2412-i2s.c +++ b/sound/soc/samsung/s3c2412-i2s.c @@ -166,7 +166,7 @@ static struct snd_soc_dai_driver s3c2412_i2s_dai = { static __devinit int s3c2412_iis_dev_probe(struct platform_device *pdev) { - return snd_soc_register_dai(&pdev->dev, &s3c2412_i2s_dai); + return s3c_i2sv2_register_dai(&pdev->dev, -1, &s3c2412_i2s_dai); } static __devexit int s3c2412_iis_dev_remove(struct platform_device *pdev) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 1d6a80c9f4c2..c88d9741b9e7 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -3625,10 +3625,10 @@ int snd_soc_of_parse_audio_routing(struct snd_soc_card *card, int i, ret; num_routes = of_property_count_strings(np, propname); - if (num_routes & 1) { + if (num_routes < 0 || num_routes & 1) { dev_err(card->dev, - "Property '%s's length is not even\n", - propname); + "Property '%s' does not exist or its length is not even\n", + propname); return -EINVAL; } num_routes /= 2; diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 95d6a6f7c33a..4915408f6a98 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -183,6 +183,9 @@ my %force_config; # do not force reboots on config problems my $no_reboot = 1; +# reboot on success +my $reboot_success = 0; + my %option_map = ( "MACHINE" => \$machine, "SSH_USER" => \$ssh_user, @@ -2192,7 +2195,7 @@ sub run_bisect { } # Are we looking for where it worked, not failed? - if ($reverse_bisect) { + if ($reverse_bisect && $ret >= 0) { $ret = !$ret; } @@ -3469,6 +3472,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { # Do not reboot on failing test options $no_reboot = 1; + $reboot_success = 0; $iteration = $i; @@ -3554,9 +3558,11 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { die "failed to checkout $checkout"; } + $no_reboot = 0; + # A test may opt to not reboot the box if ($reboot_on_success) { - $no_reboot = 0; + $reboot_success = 1; } if ($test_type eq "bisect") { @@ -3600,7 +3606,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { if ($opt{"POWEROFF_ON_SUCCESS"}) { halt; -} elsif ($opt{"REBOOT_ON_SUCCESS"} && !do_not_reboot) { +} elsif ($opt{"REBOOT_ON_SUCCESS"} && !do_not_reboot && $reboot_success) { reboot_to_good; } elsif (defined($switch_to_good)) { # still need to get to the good kernel |