1 files changed, 0 insertions, 62 deletions

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 66121633c9cd..06c42cfb7c34 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1273,48 +1273,6 @@ void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type)
 	mmc_host_clk_release(host);
 }
 
-static void mmc_poweroff_notify(struct mmc_host *host)
-{
-	struct mmc_card *card;
-	unsigned int timeout;
-	unsigned int notify_type = EXT_CSD_NO_POWER_NOTIFICATION;
-	int err = 0;
-
-	card = host->card;
-	mmc_claim_host(host);
-
-	/*
-	 * Send power notify command only if card
-	 * is mmc and notify state is powered ON
-	 */
-	if (card && mmc_card_mmc(card) &&
-	    (card->poweroff_notify_state == MMC_POWERED_ON)) {
-
-		if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) {
-			notify_type = EXT_CSD_POWER_OFF_SHORT;
-			timeout = card->ext_csd.generic_cmd6_time;
-			card->poweroff_notify_state = MMC_POWEROFF_SHORT;
-		} else {
-			notify_type = EXT_CSD_POWER_OFF_LONG;
-			timeout = card->ext_csd.power_off_longtime;
-			card->poweroff_notify_state = MMC_POWEROFF_LONG;
-		}
-
-		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-				 EXT_CSD_POWER_OFF_NOTIFICATION,
-				 notify_type, timeout);
-
-		if (err && err != -EBADMSG)
-			pr_err("Device failed to respond within %d poweroff "
-			       "time. Forcefully powering down the device\n",
-			       timeout);
-
-		/* Set the card state to no notification after the poweroff */
-		card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION;
-	}
-	mmc_release_host(host);
-}
-
 /*
  * Apply power to the MMC stack.  This is a two-stage process.
  * First, we enable power to the card without the clock running.
@@ -1377,8 +1335,6 @@ static void mmc_power_up(struct mmc_host *host)
 
 void mmc_power_off(struct mmc_host *host)
 {
-	int err = 0;
-
 	if (host->ios.power_mode == MMC_POWER_OFF)
 		return;
 
@@ -1387,22 +1343,6 @@ void mmc_power_off(struct mmc_host *host)
 	host->ios.clock = 0;
 	host->ios.vdd = 0;
 
-	/*
-	 * For eMMC 4.5 device send AWAKE command before
-	 * POWER_OFF_NOTIFY command, because in sleep state
-	 * eMMC 4.5 devices respond to only RESET and AWAKE cmd
-	 */
-	if (host->card && mmc_card_is_sleep(host->card) &&
-	    host->bus_ops->resume) {
-		err = host->bus_ops->resume(host);
-
-		if (!err)
-			mmc_poweroff_notify(host);
-		else
-			pr_warning("%s: error %d during resume "
-				   "(continue with poweroff sequence)\n",
-				   mmc_hostname(host), err);
-	}
 
 	/*
 	 * Reset ocr mask to be the highest possible voltage supported for
@@ -2579,7 +2519,6 @@ int mmc_pm_notify(struct notifier_block *notify_block,
 
 		spin_lock_irqsave(&host->lock, flags);
 		host->rescan_disable = 1;
-		host->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT;
 		spin_unlock_irqrestore(&host->lock, flags);
 		cancel_delayed_work_sync(&host->detect);
 
@@ -2603,7 +2542,6 @@ int mmc_pm_notify(struct notifier_block *notify_block,
 
 		spin_lock_irqsave(&host->lock, flags);
 		host->rescan_disable = 0;
-		host->power_notify_type = MMC_HOST_PW_NOTIFY_LONG;
 		spin_unlock_irqrestore(&host->lock, flags);
 		mmc_detect_change(host, 0);