diff options
Diffstat (limited to 'drivers/net/ethernet/intel')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 14 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ethtool.c | 13 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 71 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.h | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/netdev.c | 89 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/regs.h | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_82575.c | 44 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/igb.h | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/igb_hwmon.c | 14 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/igb_main.c | 80 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/igb_ptp.c | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgb/ixgb_main.c | 7 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 11 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 24 |
14 files changed, 206 insertions, 168 deletions
diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c index 43462d596a4e..ffd287196bf8 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c +++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c @@ -1053,6 +1053,10 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) txdr->buffer_info[i].dma = dma_map_single(&pdev->dev, skb->data, skb->len, DMA_TO_DEVICE); + if (dma_mapping_error(&pdev->dev, txdr->buffer_info[i].dma)) { + ret_val = 4; + goto err_nomem; + } tx_desc->buffer_addr = cpu_to_le64(txdr->buffer_info[i].dma); tx_desc->lower.data = cpu_to_le32(skb->len); tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP | @@ -1069,7 +1073,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) rxdr->buffer_info = kcalloc(rxdr->count, sizeof(struct e1000_buffer), GFP_KERNEL); if (!rxdr->buffer_info) { - ret_val = 4; + ret_val = 5; goto err_nomem; } @@ -1077,7 +1081,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma, GFP_KERNEL); if (!rxdr->desc) { - ret_val = 5; + ret_val = 6; goto err_nomem; } memset(rxdr->desc, 0, rxdr->size); @@ -1101,7 +1105,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL); if (!skb) { - ret_val = 6; + ret_val = 7; goto err_nomem; } skb_reserve(skb, NET_IP_ALIGN); @@ -1110,6 +1114,10 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) rxdr->buffer_info[i].dma = dma_map_single(&pdev->dev, skb->data, E1000_RXBUFFER_2048, DMA_FROM_DEVICE); + if (dma_mapping_error(&pdev->dev, rxdr->buffer_info[i].dma)) { + ret_val = 8; + goto err_nomem; + } rx_desc->buffer_addr = cpu_to_le64(rxdr->buffer_info[i].dma); memset(skb->data, 0x00, skb->len); } diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 2c1813737f6d..f91a8f3f9d48 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -36,6 +36,7 @@ #include <linux/delay.h> #include <linux/vmalloc.h> #include <linux/mdio.h> +#include <linux/pm_runtime.h> #include "e1000.h" @@ -2229,7 +2230,19 @@ static int e1000e_get_ts_info(struct net_device *netdev, return 0; } +static int e1000e_ethtool_begin(struct net_device *netdev) +{ + return pm_runtime_get_sync(netdev->dev.parent); +} + +static void e1000e_ethtool_complete(struct net_device *netdev) +{ + pm_runtime_put_sync(netdev->dev.parent); +} + static const struct ethtool_ops e1000_ethtool_ops = { + .begin = e1000e_ethtool_begin, + .complete = e1000e_ethtool_complete, .get_settings = e1000_get_settings, .set_settings = e1000_set_settings, .get_drvinfo = e1000_get_drvinfo, diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index dff7bff8b8e0..121a865c7fbd 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -782,6 +782,59 @@ release: } /** + * e1000_k1_workaround_lpt_lp - K1 workaround on Lynxpoint-LP + * @hw: pointer to the HW structure + * @link: link up bool flag + * + * When K1 is enabled for 1Gbps, the MAC can miss 2 DMA completion indications + * preventing further DMA write requests. Workaround the issue by disabling + * the de-assertion of the clock request when in 1Gpbs mode. + **/ +static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link) +{ + u32 fextnvm6 = er32(FEXTNVM6); + s32 ret_val = 0; + + if (link && (er32(STATUS) & E1000_STATUS_SPEED_1000)) { + u16 kmrn_reg; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = + e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG, + &kmrn_reg); + if (ret_val) + goto release; + + ret_val = + e1000e_write_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + kmrn_reg & + ~E1000_KMRNCTRLSTA_K1_ENABLE); + if (ret_val) + goto release; + + usleep_range(10, 20); + + ew32(FEXTNVM6, fextnvm6 | E1000_FEXTNVM6_REQ_PLL_CLK); + + ret_val = + e1000e_write_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + kmrn_reg); +release: + hw->phy.ops.release(hw); + } else { + /* clear FEXTNVM6 bit 8 on link down or 10/100 */ + ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK); + } + + return ret_val; +} + +/** * e1000_check_for_copper_link_ich8lan - Check for link (Copper) * @hw: pointer to the HW structure * @@ -818,6 +871,14 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) return ret_val; } + /* Work-around I218 hang issue */ + if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V)) { + ret_val = e1000_k1_workaround_lpt_lp(hw, link); + if (ret_val) + return ret_val; + } + /* Clear link partner's EEE ability */ hw->dev_spec.ich8lan.eee_lp_ability = 0; @@ -3954,8 +4015,16 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) phy_ctrl = er32(PHY_CTRL); phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE; + if (hw->phy.type == e1000_phy_i217) { - u16 phy_reg; + u16 phy_reg, device_id = hw->adapter->pdev->device; + + if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) || + (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V)) { + u32 fextnvm6 = er32(FEXTNVM6); + + ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK); + } ret_val = hw->phy.ops.acquire(hw); if (ret_val) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index b6d3174d7d2d..8bf4655c2e17 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -92,6 +92,8 @@ #define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7 #define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3 +#define E1000_FEXTNVM6_REQ_PLL_CLK 0x00000100 + #define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL #define E1000_ICH_RAR_ENTRIES 7 diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index a177b8b65c44..7e615e2bf7e6 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -848,11 +848,16 @@ check_page: } } - if (!buffer_info->dma) + if (!buffer_info->dma) { buffer_info->dma = dma_map_page(&pdev->dev, buffer_info->page, 0, PAGE_SIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { + adapter->alloc_rx_buff_failed++; + break; + } + } rx_desc = E1000_RX_DESC_EXT(*rx_ring, i); rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma); @@ -4303,6 +4308,7 @@ static int e1000_open(struct net_device *netdev) netif_start_queue(netdev); adapter->idle_check = true; + hw->mac.get_link_status = true; pm_runtime_put(&pdev->dev); /* fire a link status change interrupt to start the watchdog */ @@ -4662,6 +4668,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) (adapter->hw.phy.media_type == e1000_media_type_copper)) { int ret_val; + pm_runtime_get_sync(&adapter->pdev->dev); ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr); ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr); ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise); @@ -4672,6 +4679,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus); if (ret_val) e_warn("Error reading PHY register\n"); + pm_runtime_put_sync(&adapter->pdev->dev); } else { /* Do not read PHY registers if link is not up * Set values to typical power-on defaults @@ -5887,8 +5895,7 @@ release: return retval; } -static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, - bool runtime) +static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); @@ -5912,10 +5919,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, } e1000e_reset_interrupt_capability(adapter); - retval = pci_save_state(pdev); - if (retval) - return retval; - status = er32(STATUS); if (status & E1000_STATUS_LU) wufc &= ~E1000_WUFC_LNKC; @@ -5971,13 +5974,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, ew32(WUFC, 0); } - *enable_wake = !!wufc; - - /* make sure adapter isn't asleep if manageability is enabled */ - if ((adapter->flags & FLAG_MNG_PT_ENABLED) || - (hw->mac.ops.check_mng_mode(hw))) - *enable_wake = true; - if (adapter->hw.phy.type == e1000_phy_igp_3) e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw); @@ -5986,27 +5982,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, */ e1000e_release_hw_control(adapter); - pci_disable_device(pdev); - - return 0; -} - -static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake) -{ - if (sleep && wake) { - pci_prepare_to_sleep(pdev); - return; - } - - pci_wake_from_d3(pdev, wake); - pci_set_power_state(pdev, PCI_D3hot); -} - -static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep, - bool wake) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct e1000_adapter *adapter = netdev_priv(netdev); + pci_clear_master(pdev); /* The pci-e switch on some quad port adapters will report a * correctable error when the MAC transitions from D0 to D3. To @@ -6021,12 +5997,13 @@ static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep, pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, (devctl & ~PCI_EXP_DEVCTL_CERE)); - e1000_power_off(pdev, sleep, wake); + pci_save_state(pdev); + pci_prepare_to_sleep(pdev); pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, devctl); - } else { - e1000_power_off(pdev, sleep, wake); } + + return 0; } #ifdef CONFIG_PCIEASPM @@ -6084,9 +6061,7 @@ static int __e1000_resume(struct pci_dev *pdev) if (aspm_disable_flag) e1000e_disable_aspm(pdev, aspm_disable_flag); - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - pci_save_state(pdev); + pci_set_master(pdev); e1000e_set_interrupt_capability(adapter); if (netif_running(netdev)) { @@ -6152,14 +6127,8 @@ static int __e1000_resume(struct pci_dev *pdev) static int e1000_suspend(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); - int retval; - bool wake; - retval = __e1000_shutdown(pdev, &wake, false); - if (!retval) - e1000_complete_shutdown(pdev, true, wake); - - return retval; + return __e1000_shutdown(pdev, false); } static int e1000_resume(struct device *dev) @@ -6182,13 +6151,10 @@ static int e1000_runtime_suspend(struct device *dev) struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); - if (e1000e_pm_ready(adapter)) { - bool wake; - - __e1000_shutdown(pdev, &wake, true); - } + if (!e1000e_pm_ready(adapter)) + return 0; - return 0; + return __e1000_shutdown(pdev, true); } static int e1000_idle(struct device *dev) @@ -6226,12 +6192,7 @@ static int e1000_runtime_resume(struct device *dev) static void e1000_shutdown(struct pci_dev *pdev) { - bool wake = false; - - __e1000_shutdown(pdev, &wake, false); - - if (system_state == SYSTEM_POWER_OFF) - e1000_complete_shutdown(pdev, false, wake); + __e1000_shutdown(pdev, false); } #ifdef CONFIG_NET_POLL_CONTROLLER @@ -6352,9 +6313,9 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) "Cannot re-enable PCI device after reset.\n"); result = PCI_ERS_RESULT_DISCONNECT; } else { - pci_set_master(pdev); pdev->state_saved = true; pci_restore_state(pdev); + pci_set_master(pdev); pci_enable_wake(pdev, PCI_D3hot, 0); pci_enable_wake(pdev, PCI_D3cold, 0); @@ -6783,7 +6744,11 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; - device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + + /* make sure adapter isn't asleep if manageability is enabled */ + if (adapter->wol || (adapter->flags & FLAG_MNG_PT_ENABLED) || + (hw->mac.ops.check_mng_mode(hw))) + device_wakeup_enable(&pdev->dev); /* save off EEPROM version number */ e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers); diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h index 794fe1497666..a7e6a3e37257 100644 --- a/drivers/net/ethernet/intel/e1000e/regs.h +++ b/drivers/net/ethernet/intel/e1000e/regs.h @@ -42,6 +42,7 @@ #define E1000_FEXTNVM 0x00028 /* Future Extended NVM - RW */ #define E1000_FEXTNVM3 0x0003C /* Future Extended NVM 3 - RW */ #define E1000_FEXTNVM4 0x00024 /* Future Extended NVM 4 - RW */ +#define E1000_FEXTNVM6 0x00010 /* Future Extended NVM 6 - RW */ #define E1000_FEXTNVM7 0x000E4 /* Future Extended NVM 7 - RW */ #define E1000_FCT 0x00030 /* Flow Control Type - RW */ #define E1000_VET 0x00038 /* VLAN Ether Type - RW */ diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index 84e7e0909def..12b1d8480808 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -1361,11 +1361,16 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) switch (hw->phy.type) { case e1000_phy_i210: case e1000_phy_m88: - if (hw->phy.id == I347AT4_E_PHY_ID || - hw->phy.id == M88E1112_E_PHY_ID) + switch (hw->phy.id) { + case I347AT4_E_PHY_ID: + case M88E1112_E_PHY_ID: + case I210_I_PHY_ID: ret_val = igb_copper_link_setup_m88_gen2(hw); - else + break; + default: ret_val = igb_copper_link_setup_m88(hw); + break; + } break; case e1000_phy_igp_3: ret_val = igb_copper_link_setup_igp(hw); @@ -1813,27 +1818,32 @@ out: **/ void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf) { - u32 dtxswc; + u32 reg_val, reg_offset; switch (hw->mac.type) { case e1000_82576: + reg_offset = E1000_DTXSWC; + break; case e1000_i350: - dtxswc = rd32(E1000_DTXSWC); - if (enable) { - dtxswc |= (E1000_DTXSWC_MAC_SPOOF_MASK | - E1000_DTXSWC_VLAN_SPOOF_MASK); - /* The PF can spoof - it has to in order to - * support emulation mode NICs */ - dtxswc ^= (1 << pf | 1 << (pf + MAX_NUM_VFS)); - } else { - dtxswc &= ~(E1000_DTXSWC_MAC_SPOOF_MASK | - E1000_DTXSWC_VLAN_SPOOF_MASK); - } - wr32(E1000_DTXSWC, dtxswc); + reg_offset = E1000_TXSWC; break; default: - break; + return; + } + + reg_val = rd32(reg_offset); + if (enable) { + reg_val |= (E1000_DTXSWC_MAC_SPOOF_MASK | + E1000_DTXSWC_VLAN_SPOOF_MASK); + /* The PF can spoof - it has to in order to + * support emulation mode NICs + */ + reg_val ^= (1 << pf | 1 << (pf + MAX_NUM_VFS)); + } else { + reg_val &= ~(E1000_DTXSWC_MAC_SPOOF_MASK | + E1000_DTXSWC_VLAN_SPOOF_MASK); } + wr32(reg_offset, reg_val); } /** diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index d27edbc63923..25151401c2ab 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -447,7 +447,7 @@ struct igb_adapter { #endif struct i2c_algo_bit_data i2c_algo; struct i2c_adapter i2c_adap; - struct igb_i2c_client_list *i2c_clients; + struct i2c_client *i2c_client; }; #define IGB_FLAG_HAS_MSI (1 << 0) diff --git a/drivers/net/ethernet/intel/igb/igb_hwmon.c b/drivers/net/ethernet/intel/igb/igb_hwmon.c index 0a9b073d0b03..0478a1abe541 100644 --- a/drivers/net/ethernet/intel/igb/igb_hwmon.c +++ b/drivers/net/ethernet/intel/igb/igb_hwmon.c @@ -39,6 +39,10 @@ #include <linux/pci.h> #ifdef CONFIG_IGB_HWMON +static struct i2c_board_info i350_sensor_info = { + I2C_BOARD_INFO("i350bb", (0Xf8 >> 1)), +}; + /* hwmon callback functions */ static ssize_t igb_hwmon_show_location(struct device *dev, struct device_attribute *attr, @@ -188,6 +192,7 @@ int igb_sysfs_init(struct igb_adapter *adapter) unsigned int i; int n_attrs; int rc = 0; + struct i2c_client *client = NULL; /* If this method isn't defined we don't support thermals */ if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL) @@ -198,6 +203,15 @@ int igb_sysfs_init(struct igb_adapter *adapter) if (rc) goto exit; + /* init i2c_client */ + client = i2c_new_device(&adapter->i2c_adap, &i350_sensor_info); + if (client == NULL) { + dev_info(&adapter->pdev->dev, + "Failed to create new i2c device..\n"); + goto exit; + } + adapter->i2c_client = client; + /* Allocation space for max attributes * max num sensors * values (loc, temp, max, caution) */ diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index ed79a1c53b59..8496adfc6a68 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -1923,10 +1923,6 @@ void igb_set_fw_version(struct igb_adapter *adapter) return; } -static const struct i2c_board_info i350_sensor_info = { - I2C_BOARD_INFO("i350bb", 0Xf8), -}; - /* igb_init_i2c - Init I2C interface * @adapter: pointer to adapter structure * @@ -2546,8 +2542,8 @@ static void igb_probe_vfs(struct igb_adapter *adapter) if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211)) return; - igb_enable_sriov(pdev, max_vfs); pci_sriov_set_totalvfs(pdev, 7); + igb_enable_sriov(pdev, max_vfs); #endif /* CONFIG_PCI_IOV */ } @@ -2656,7 +2652,7 @@ static int igb_sw_init(struct igb_adapter *adapter) if (max_vfs > 7) { dev_warn(&pdev->dev, "Maximum of 7 VFs per PF, using max\n"); - adapter->vfs_allocated_count = 7; + max_vfs = adapter->vfs_allocated_count = 7; } else adapter->vfs_allocated_count = max_vfs; if (adapter->vfs_allocated_count) @@ -6227,13 +6223,6 @@ static struct sk_buff *igb_build_rx_buffer(struct igb_ring *rx_ring, /* If we spanned a buffer we have a huge mess so test for it */ BUG_ON(unlikely(!igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP))); - /* Guarantee this function can be used by verifying buffer sizes */ - BUILD_BUG_ON(SKB_WITH_OVERHEAD(IGB_RX_BUFSZ) < (NET_SKB_PAD + - NET_IP_ALIGN + - IGB_TS_HDR_LEN + - ETH_FRAME_LEN + - ETH_FCS_LEN)); - rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean]; page = rx_buffer->page; prefetchw(page); @@ -7724,67 +7713,6 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) } } -static DEFINE_SPINLOCK(i2c_clients_lock); - -/* igb_get_i2c_client - returns matching client - * in adapters's client list. - * @adapter: adapter struct - * @dev_addr: device address of i2c needed. - */ -static struct i2c_client * -igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr) -{ - ulong flags; - struct igb_i2c_client_list *client_list; - struct i2c_client *client = NULL; - struct i2c_board_info client_info = { - I2C_BOARD_INFO("igb", 0x00), - }; - - spin_lock_irqsave(&i2c_clients_lock, flags); - client_list = adapter->i2c_clients; - - /* See if we already have an i2c_client */ - while (client_list) { - if (client_list->client->addr == (dev_addr >> 1)) { - client = client_list->client; - goto exit; - } else { - client_list = client_list->next; - } - } - - /* no client_list found, create a new one */ - client_list = kzalloc(sizeof(*client_list), GFP_ATOMIC); - if (client_list == NULL) - goto exit; - - /* dev_addr passed to us is left-shifted by 1 bit - * i2c_new_device call expects it to be flush to the right. - */ - client_info.addr = dev_addr >> 1; - client_info.platform_data = adapter; - client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info); - if (client_list->client == NULL) { - dev_info(&adapter->pdev->dev, - "Failed to create new i2c device..\n"); - goto err_no_client; - } - - /* insert new client at head of list */ - client_list->next = adapter->i2c_clients; - adapter->i2c_clients = client_list; - - client = client_list->client; - goto exit; - -err_no_client: - kfree(client_list); -exit: - spin_unlock_irqrestore(&i2c_clients_lock, flags); - return client; -} - /* igb_read_i2c_byte - Reads 8 bit word over I2C * @hw: pointer to hardware structure * @byte_offset: byte offset to read @@ -7798,7 +7726,7 @@ s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, u8 dev_addr, u8 *data) { struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); - struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr); + struct i2c_client *this_client = adapter->i2c_client; s32 status; u16 swfw_mask = 0; @@ -7835,7 +7763,7 @@ s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset, u8 dev_addr, u8 data) { struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); - struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr); + struct i2c_client *this_client = adapter->i2c_client; s32 status; u16 swfw_mask = E1000_SWFW_PHY0_SM; diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c index 0987822359f0..0a237507ee85 100644 --- a/drivers/net/ethernet/intel/igb/igb_ptp.c +++ b/drivers/net/ethernet/intel/igb/igb_ptp.c @@ -740,7 +740,7 @@ void igb_ptp_init(struct igb_adapter *adapter) case e1000_82576: snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr); adapter->ptp_caps.owner = THIS_MODULE; - adapter->ptp_caps.max_adj = 1000000000; + adapter->ptp_caps.max_adj = 999999881; adapter->ptp_caps.n_ext_ts = 0; adapter->ptp_caps.pps = 0; adapter->ptp_caps.adjfreq = igb_ptp_adjfreq_82576; diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c index ea4808373435..b5f94abe3cff 100644 --- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c +++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c @@ -2159,6 +2159,10 @@ map_skb: skb->data, adapter->rx_buffer_len, DMA_FROM_DEVICE); + if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { + adapter->alloc_rx_buff_failed++; + break; + } rx_desc = IXGB_RX_DESC(*rx_ring, i); rx_desc->buff_addr = cpu_to_le64(buffer_info->dma); @@ -2168,7 +2172,8 @@ map_skb: rx_desc->status = 0; - if (++i == rx_ring->count) i = 0; + if (++i == rx_ring->count) + i = 0; buffer_info = &rx_ring->buffer_info[i]; } diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index db5611ae407e..79f4a26ea6cc 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7922,12 +7922,19 @@ static int __init ixgbe_init_module(void) ixgbe_dbg_init(); #endif /* CONFIG_DEBUG_FS */ + ret = pci_register_driver(&ixgbe_driver); + if (ret) { +#ifdef CONFIG_DEBUG_FS + ixgbe_dbg_exit(); +#endif /* CONFIG_DEBUG_FS */ + return ret; + } + #ifdef CONFIG_IXGBE_DCA dca_register_notify(&dca_notifier); #endif - ret = pci_register_driver(&ixgbe_driver); - return ret; + return 0; } module_init(ixgbe_init_module); diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index c3db6cd69b68..2b6cb5ca48ee 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -944,9 +944,17 @@ free_queue_irqs: free_irq(adapter->msix_entries[vector].vector, adapter->q_vector[vector]); } - pci_disable_msix(adapter->pdev); - kfree(adapter->msix_entries); - adapter->msix_entries = NULL; + /* This failure is non-recoverable - it indicates the system is + * out of MSIX vector resources and the VF driver cannot run + * without them. Set the number of msix vectors to zero + * indicating that not enough can be allocated. The error + * will be returned to the user indicating device open failed. + * Any further attempts to force the driver to open will also + * fail. The only way to recover is to unload the driver and + * reload it again. If the system has recovered some MSIX + * vectors then it may succeed. + */ + adapter->num_msix_vectors = 0; return err; } @@ -2572,6 +2580,15 @@ static int ixgbevf_open(struct net_device *netdev) struct ixgbe_hw *hw = &adapter->hw; int err; + /* A previous failure to open the device because of a lack of + * available MSIX vector resources may have reset the number + * of msix vectors variable to zero. The only way to recover + * is to unload/reload the driver and hope that the system has + * been able to recover some MSIX vector resources. + */ + if (!adapter->num_msix_vectors) + return -ENOMEM; + /* disallow open during test */ if (test_bit(__IXGBEVF_TESTING, &adapter->state)) return -EBUSY; @@ -2628,7 +2645,6 @@ static int ixgbevf_open(struct net_device *netdev) err_req_irq: ixgbevf_down(adapter); - ixgbevf_free_irq(adapter); err_setup_rx: ixgbevf_free_all_rx_resources(adapter); err_setup_tx: |