diff options
Diffstat (limited to 'drivers/scsi/megaraid/megaraid_sas.c')
| -rw-r--r-- | drivers/scsi/megaraid/megaraid_sas.c | 130 |
1 files changed, 114 insertions, 16 deletions
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index a487f414960e..4f39dd01936d 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -10,7 +10,7 @@ * 2 of the License, or (at your option) any later version. * * FILE : megaraid_sas.c - * Version : v00.00.02.02 + * Version : v00.00.02.04 * * Authors: * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com> @@ -60,6 +60,12 @@ static struct pci_device_id megasas_pci_table[] = { PCI_ANY_ID, }, { + PCI_VENDOR_ID_LSI_LOGIC, + PCI_DEVICE_ID_LSI_SAS1078R, // ppc IOP + PCI_ANY_ID, + PCI_ANY_ID, + }, + { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5, // xscale IOP PCI_ANY_ID, @@ -199,6 +205,86 @@ static struct megasas_instance_template megasas_instance_template_xscale = { */ /** +* The following functions are defined for ppc (deviceid : 0x60) +* controllers +*/ + +/** + * megasas_enable_intr_ppc - Enables interrupts + * @regs: MFI register set + */ +static inline void +megasas_enable_intr_ppc(struct megasas_register_set __iomem * regs) +{ + writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear); + + writel(~0x80000004, &(regs)->outbound_intr_mask); + + /* Dummy readl to force pci flush */ + readl(®s->outbound_intr_mask); +} + +/** + * megasas_read_fw_status_reg_ppc - returns the current FW status value + * @regs: MFI register set + */ +static u32 +megasas_read_fw_status_reg_ppc(struct megasas_register_set __iomem * regs) +{ + return readl(&(regs)->outbound_scratch_pad); +} + +/** + * megasas_clear_interrupt_ppc - Check & clear interrupt + * @regs: MFI register set + */ +static int +megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs) +{ + u32 status; + /* + * Check if it is our interrupt + */ + status = readl(®s->outbound_intr_status); + + if (!(status & MFI_REPLY_1078_MESSAGE_INTERRUPT)) { + return 1; + } + + /* + * Clear the interrupt by writing back the same value + */ + writel(status, ®s->outbound_doorbell_clear); + + return 0; +} +/** + * megasas_fire_cmd_ppc - Sends command to the FW + * @frame_phys_addr : Physical address of cmd + * @frame_count : Number of frames for the command + * @regs : MFI register set + */ +static inline void +megasas_fire_cmd_ppc(dma_addr_t frame_phys_addr, u32 frame_count, struct megasas_register_set __iomem *regs) +{ + writel((frame_phys_addr | (frame_count<<1))|1, + &(regs)->inbound_queue_port); +} + +static struct megasas_instance_template megasas_instance_template_ppc = { + + .fire_cmd = megasas_fire_cmd_ppc, + .enable_intr = megasas_enable_intr_ppc, + .clear_intr = megasas_clear_intr_ppc, + .read_fw_status_reg = megasas_read_fw_status_reg_ppc, +}; + +/** +* This is the end of set of functions & definitions +* specific to ppc (deviceid : 0x60) controllers +*/ + +/** * megasas_disable_intr - Disables interrupts * @regs: MFI register set */ @@ -707,6 +793,20 @@ megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *)) return 0; } +static int megasas_slave_configure(struct scsi_device *sdev) +{ + /* + * Don't export physical disk devices to the disk driver. + * + * FIXME: Currently we don't export them to the midlayer at all. + * That will be fixed once LSI engineers have audited the + * firmware for possible issues. + */ + if (sdev->channel < MEGASAS_MAX_PD_CHANNELS && sdev->type == TYPE_DISK) + return -ENXIO; + return 0; +} + /** * megasas_wait_for_outstanding - Wait for all outstanding cmds * @instance: Adapter soft state @@ -857,6 +957,7 @@ static struct scsi_host_template megasas_template = { .module = THIS_MODULE, .name = "LSI Logic SAS based MegaRAID driver", .proc_name = "megaraid_sas", + .slave_configure = megasas_slave_configure, .queuecommand = megasas_queue_command, .eh_device_reset_handler = megasas_reset_device, .eh_bus_reset_handler = megasas_reset_bus_host, @@ -985,20 +1086,6 @@ megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd, break; } - /* - * Don't export physical disk devices to mid-layer. - */ - if (!MEGASAS_IS_LOGICAL(cmd->scmd) && - (hdr->cmd_status == MFI_STAT_OK) && - (cmd->scmd->cmnd[0] == INQUIRY)) { - - if (((*(u8 *) cmd->scmd->request_buffer) & 0x1F) == - TYPE_DISK) { - cmd->scmd->result = DID_BAD_TARGET << 16; - exception = 1; - } - } - case MFI_CMD_LD_READ: case MFI_CMD_LD_WRITE: @@ -1607,7 +1694,17 @@ static int megasas_init_mfi(struct megasas_instance *instance) reg_set = instance->reg_set; - instance->instancet = &megasas_instance_template_xscale; + switch(instance->pdev->device) + { + case PCI_DEVICE_ID_LSI_SAS1078R: + instance->instancet = &megasas_instance_template_ppc; + break; + case PCI_DEVICE_ID_LSI_SAS1064R: + case PCI_DEVICE_ID_DELL_PERC5: + default: + instance->instancet = &megasas_instance_template_xscale; + break; + } /* * We expect the FW state to be READY @@ -1983,6 +2080,7 @@ static int megasas_io_attach(struct megasas_instance *instance) host->max_channel = MEGASAS_MAX_CHANNELS - 1; host->max_id = MEGASAS_MAX_DEV_PER_CHANNEL; host->max_lun = MEGASAS_MAX_LUN; + host->max_cmd_len = 16; /* * Notify the mid-layer about the new controller |