aboutsummaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/Kconfig2
-rw-r--r--drivers/spi/Makefile2
-rw-r--r--drivers/spi/spi-bcm63xx.c163
-rw-r--r--drivers/spi/spi-bfin-sport.c21
-rw-r--r--drivers/spi/spi-bfin5xx.c14
-rw-r--r--drivers/spi/spi-ep93xx.c24
-rw-r--r--drivers/spi/spi-imx.c8
-rw-r--r--drivers/spi/spi-pl022.c58
8 files changed, 165 insertions, 127 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 3ed748355b98..00c024039c97 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -74,7 +74,7 @@ config SPI_ATMEL
This selects a driver for the Atmel SPI Controller, present on
many AT32 (AVR32) and AT91 (ARM) chips.
-config SPI_BFIN
+config SPI_BFIN5XX
tristate "SPI controller driver for ADI Blackfin5xx"
depends on BLACKFIN
help
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index a1d48e0ba3dc..9d75d2198ff5 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
-obj-$(CONFIG_SPI_BFIN) += spi-bfin5xx.o
+obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o
obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o
obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o
obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o
diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index f01b2648452e..7491971139a6 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -1,7 +1,7 @@
/*
* Broadcom BCM63xx SPI controller support
*
- * Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2009-2012 Florian Fainelli <florian@openwrt.org>
* Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
*
* This program is free software; you can redistribute it and/or
@@ -30,6 +30,8 @@
#include <linux/spi/spi.h>
#include <linux/completion.h>
#include <linux/err.h>
+#include <linux/workqueue.h>
+#include <linux/pm_runtime.h>
#include <bcm63xx_dev_spi.h>
@@ -37,8 +39,6 @@
#define DRV_VER "0.1.2"
struct bcm63xx_spi {
- spinlock_t lock;
- int stopping;
struct completion done;
void __iomem *regs;
@@ -96,17 +96,12 @@ static const unsigned bcm63xx_spi_freq_table[SPI_CLK_MASK][2] = {
{ 391000, SPI_CLK_0_391MHZ }
};
-static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
- struct spi_transfer *t)
+static int bcm63xx_spi_check_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
{
- struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
u8 bits_per_word;
- u8 clk_cfg, reg;
- u32 hz;
- int i;
bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
- hz = (t) ? t->speed_hz : spi->max_speed_hz;
if (bits_per_word != 8) {
dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
__func__, bits_per_word);
@@ -119,6 +114,19 @@ static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
return -EINVAL;
}
+ return 0;
+}
+
+static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
+ u32 hz;
+ u8 clk_cfg, reg;
+ int i;
+
+ hz = (t) ? t->speed_hz : spi->max_speed_hz;
+
/* Find the closest clock configuration */
for (i = 0; i < SPI_CLK_MASK; i++) {
if (hz <= bcm63xx_spi_freq_table[i][0]) {
@@ -139,8 +147,6 @@ static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
bcm_spi_writeb(bs, reg, SPI_CLK_CFG);
dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n",
clk_cfg, hz);
-
- return 0;
}
/* the spi->mode bits understood by this driver: */
@@ -153,9 +159,6 @@ static int bcm63xx_spi_setup(struct spi_device *spi)
bs = spi_master_get_devdata(spi->master);
- if (bs->stopping)
- return -ESHUTDOWN;
-
if (!spi->bits_per_word)
spi->bits_per_word = 8;
@@ -165,7 +168,7 @@ static int bcm63xx_spi_setup(struct spi_device *spi)
return -EINVAL;
}
- ret = bcm63xx_spi_setup_transfer(spi, NULL);
+ ret = bcm63xx_spi_check_transfer(spi, NULL);
if (ret < 0) {
dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
spi->mode & ~MODEBITS);
@@ -190,28 +193,29 @@ static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
bs->remaining_bytes -= size;
}
-static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
+static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi,
+ struct spi_transfer *t)
{
struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
u16 msg_ctl;
u16 cmd;
+ /* Disable the CMD_DONE interrupt */
+ bcm_spi_writeb(bs, 0, SPI_INT_MASK);
+
dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
t->tx_buf, t->rx_buf, t->len);
/* Transmitter is inhibited */
bs->tx_ptr = t->tx_buf;
bs->rx_ptr = t->rx_buf;
- init_completion(&bs->done);
if (t->tx_buf) {
bs->remaining_bytes = t->len;
bcm63xx_spi_fill_tx_fifo(bs);
}
- /* Enable the command done interrupt which
- * we use to determine completion of a command */
- bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
+ init_completion(&bs->done);
/* Fill in the Message control register */
msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
@@ -230,33 +234,76 @@ static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
bcm_spi_writew(bs, cmd, SPI_CMD);
- wait_for_completion(&bs->done);
- /* Disable the CMD_DONE interrupt */
- bcm_spi_writeb(bs, 0, SPI_INT_MASK);
+ /* Enable the CMD_DONE interrupt */
+ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
return t->len - bs->remaining_bytes;
}
-static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m)
+static int bcm63xx_spi_prepare_transfer(struct spi_master *master)
{
- struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
- struct spi_transfer *t;
- int ret = 0;
+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
- if (unlikely(list_empty(&m->transfers)))
- return -EINVAL;
+ pm_runtime_get_sync(&bs->pdev->dev);
- if (bs->stopping)
- return -ESHUTDOWN;
+ return 0;
+}
+
+static int bcm63xx_spi_unprepare_transfer(struct spi_master *master)
+{
+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+
+ pm_runtime_put(&bs->pdev->dev);
+
+ return 0;
+}
+
+static int bcm63xx_spi_transfer_one(struct spi_master *master,
+ struct spi_message *m)
+{
+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+ struct spi_transfer *t;
+ struct spi_device *spi = m->spi;
+ int status = 0;
+ unsigned int timeout = 0;
list_for_each_entry(t, &m->transfers, transfer_list) {
- ret += bcm63xx_txrx_bufs(spi, t);
- }
+ unsigned int len = t->len;
+ u8 rx_tail;
- m->complete(m->context);
+ status = bcm63xx_spi_check_transfer(spi, t);
+ if (status < 0)
+ goto exit;
- return ret;
+ /* configure adapter for a new transfer */
+ bcm63xx_spi_setup_transfer(spi, t);
+
+ while (len) {
+ /* send the data */
+ len -= bcm63xx_txrx_bufs(spi, t);
+
+ timeout = wait_for_completion_timeout(&bs->done, HZ);
+ if (!timeout) {
+ status = -ETIMEDOUT;
+ goto exit;
+ }
+
+ /* read out all data */
+ rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
+
+ /* Read out all the data */
+ if (rx_tail)
+ memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
+ }
+
+ m->actual_length += t->len;
+ }
+exit:
+ m->status = status;
+ spi_finalize_current_message(master);
+
+ return 0;
}
/* This driver supports single master mode only. Hence
@@ -267,39 +314,15 @@ static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
struct spi_master *master = (struct spi_master *)dev_id;
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
u8 intr;
- u16 cmd;
/* Read interupts and clear them immediately */
intr = bcm_spi_readb(bs, SPI_INT_STATUS);
bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
bcm_spi_writeb(bs, 0, SPI_INT_MASK);
- /* A tansfer completed */
- if (intr & SPI_INTR_CMD_DONE) {
- u8 rx_tail;
-
- rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
-
- /* Read out all the data */
- if (rx_tail)
- memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
-
- /* See if there is more data to send */
- if (bs->remaining_bytes > 0) {
- bcm63xx_spi_fill_tx_fifo(bs);
-
- /* Start the transfer */
- bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT,
- SPI_MSG_CTL);
- cmd = bcm_spi_readw(bs, SPI_CMD);
- cmd |= SPI_CMD_START_IMMEDIATE;
- cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
- bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
- bcm_spi_writew(bs, cmd, SPI_CMD);
- } else {
- complete(&bs->done);
- }
- }
+ /* A transfer completed */
+ if (intr & SPI_INTR_CMD_DONE)
+ complete(&bs->done);
return IRQ_HANDLED;
}
@@ -345,7 +368,6 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev)
}
bs = spi_master_get_devdata(master);
- init_completion(&bs->done);
platform_set_drvdata(pdev, master);
bs->pdev = pdev;
@@ -379,12 +401,13 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev)
master->bus_num = pdata->bus_num;
master->num_chipselect = pdata->num_chipselect;
master->setup = bcm63xx_spi_setup;
- master->transfer = bcm63xx_transfer;
+ master->prepare_transfer_hardware = bcm63xx_spi_prepare_transfer;
+ master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer;
+ master->transfer_one_message = bcm63xx_spi_transfer_one;
+ master->mode_bits = MODEBITS;
bs->speed_hz = pdata->speed_hz;
- bs->stopping = 0;
bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
- spin_lock_init(&bs->lock);
/* Initialize hardware */
clk_enable(bs->clk);
@@ -418,18 +441,16 @@ static int __devexit bcm63xx_spi_remove(struct platform_device *pdev)
struct spi_master *master = platform_get_drvdata(pdev);
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
+ spi_unregister_master(master);
+
/* reset spi block */
bcm_spi_writeb(bs, 0, SPI_INT_MASK);
- spin_lock(&bs->lock);
- bs->stopping = 1;
/* HW shutdown */
clk_disable(bs->clk);
clk_put(bs->clk);
- spin_unlock(&bs->lock);
platform_set_drvdata(pdev, 0);
- spi_unregister_master(master);
return 0;
}
diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c
index 248a2cc671a9..1fe51198a622 100644
--- a/drivers/spi/spi-bfin-sport.c
+++ b/drivers/spi/spi-bfin-sport.c
@@ -252,19 +252,15 @@ static void
bfin_sport_spi_restore_state(struct bfin_sport_spi_master_data *drv_data)
{
struct bfin_sport_spi_slave_data *chip = drv_data->cur_chip;
- unsigned int bits = (drv_data->ops == &bfin_sport_transfer_ops_u8 ? 7 : 15);
bfin_sport_spi_disable(drv_data);
dev_dbg(drv_data->dev, "restoring spi ctl state\n");
bfin_write(&drv_data->regs->tcr1, chip->ctl_reg);
- bfin_write(&drv_data->regs->tcr2, bits);
bfin_write(&drv_data->regs->tclkdiv, chip->baud);
- bfin_write(&drv_data->regs->tfsdiv, bits);
SSYNC();
bfin_write(&drv_data->regs->rcr1, chip->ctl_reg & ~(ITCLK | ITFS));
- bfin_write(&drv_data->regs->rcr2, bits);
SSYNC();
bfin_sport_spi_cs_active(chip);
@@ -420,11 +416,15 @@ bfin_sport_spi_pump_transfers(unsigned long data)
drv_data->cs_change = transfer->cs_change;
/* Bits per word setup */
- bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word;
- if (bits_per_word == 8)
- drv_data->ops = &bfin_sport_transfer_ops_u8;
- else
+ bits_per_word = transfer->bits_per_word ? :
+ message->spi->bits_per_word ? : 8;
+ if (bits_per_word % 16 == 0)
drv_data->ops = &bfin_sport_transfer_ops_u16;
+ else
+ drv_data->ops = &bfin_sport_transfer_ops_u8;
+ bfin_write(&drv_data->regs->tcr2, bits_per_word - 1);
+ bfin_write(&drv_data->regs->tfsdiv, bits_per_word - 1);
+ bfin_write(&drv_data->regs->rcr2, bits_per_word - 1);
drv_data->state = RUNNING_STATE;
@@ -598,11 +598,12 @@ bfin_sport_spi_setup(struct spi_device *spi)
}
chip->cs_chg_udelay = chip_info->cs_chg_udelay;
chip->idle_tx_val = chip_info->idle_tx_val;
- spi->bits_per_word = chip_info->bits_per_word;
}
}
- if (spi->bits_per_word != 8 && spi->bits_per_word != 16) {
+ if (spi->bits_per_word % 8) {
+ dev_err(&spi->dev, "%d bits_per_word is not supported\n",
+ spi->bits_per_word);
ret = -EINVAL;
goto error;
}
diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c
index 3b83ff8b1e2b..9bb4d4af8547 100644
--- a/drivers/spi/spi-bfin5xx.c
+++ b/drivers/spi/spi-bfin5xx.c
@@ -396,7 +396,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id)
/* last read */
if (drv_data->rx) {
dev_dbg(&drv_data->pdev->dev, "last read\n");
- if (n_bytes % 2) {
+ if (!(n_bytes % 2)) {
u16 *buf = (u16 *)drv_data->rx;
for (loop = 0; loop < n_bytes / 2; loop++)
*buf++ = bfin_read(&drv_data->regs->rdbr);
@@ -424,7 +424,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id)
if (drv_data->rx && drv_data->tx) {
/* duplex */
dev_dbg(&drv_data->pdev->dev, "duplex: write_TDBR\n");
- if (n_bytes % 2) {
+ if (!(n_bytes % 2)) {
u16 *buf = (u16 *)drv_data->rx;
u16 *buf2 = (u16 *)drv_data->tx;
for (loop = 0; loop < n_bytes / 2; loop++) {
@@ -442,7 +442,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id)
} else if (drv_data->rx) {
/* read */
dev_dbg(&drv_data->pdev->dev, "read: write_TDBR\n");
- if (n_bytes % 2) {
+ if (!(n_bytes % 2)) {
u16 *buf = (u16 *)drv_data->rx;
for (loop = 0; loop < n_bytes / 2; loop++) {
*buf++ = bfin_read(&drv_data->regs->rdbr);
@@ -458,7 +458,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id)
} else if (drv_data->tx) {
/* write */
dev_dbg(&drv_data->pdev->dev, "write: write_TDBR\n");
- if (n_bytes % 2) {
+ if (!(n_bytes % 2)) {
u16 *buf = (u16 *)drv_data->tx;
for (loop = 0; loop < n_bytes / 2; loop++) {
bfin_read(&drv_data->regs->rdbr);
@@ -587,6 +587,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
if (message->state == DONE_STATE) {
dev_dbg(&drv_data->pdev->dev, "transfer: all done!\n");
message->status = 0;
+ bfin_spi_flush(drv_data);
bfin_spi_giveback(drv_data);
return;
}
@@ -870,8 +871,10 @@ static void bfin_spi_pump_transfers(unsigned long data)
message->actual_length += drv_data->len_in_bytes;
/* Move to next transfer of this msg */
message->state = bfin_spi_next_transfer(drv_data);
- if (drv_data->cs_change)
+ if (drv_data->cs_change && message->state != DONE_STATE) {
+ bfin_spi_flush(drv_data);
bfin_spi_cs_deactive(drv_data, chip);
+ }
}
/* Schedule next transfer tasklet */
@@ -1026,7 +1029,6 @@ static int bfin_spi_setup(struct spi_device *spi)
chip->cs_chg_udelay = chip_info->cs_chg_udelay;
chip->idle_tx_val = chip_info->idle_tx_val;
chip->pio_interrupt = chip_info->pio_interrupt;
- spi->bits_per_word = chip_info->bits_per_word;
} else {
/* force a default base state */
chip->ctl_reg &= bfin_ctl_reg;
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index 6db2887852d6..e8055073e84d 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -545,13 +545,12 @@ static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi)
* in case of failure.
*/
static struct dma_async_tx_descriptor *
-ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir)
+ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir)
{
struct spi_transfer *t = espi->current_msg->state;
struct dma_async_tx_descriptor *txd;
enum dma_slave_buswidth buswidth;
struct dma_slave_config conf;
- enum dma_transfer_direction slave_dirn;
struct scatterlist *sg;
struct sg_table *sgt;
struct dma_chan *chan;
@@ -567,14 +566,13 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir)
memset(&conf, 0, sizeof(conf));
conf.direction = dir;
- if (dir == DMA_FROM_DEVICE) {
+ if (dir == DMA_DEV_TO_MEM) {
chan = espi->dma_rx;
buf = t->rx_buf;
sgt = &espi->rx_sgt;
conf.src_addr = espi->sspdr_phys;
conf.src_addr_width = buswidth;
- slave_dirn = DMA_DEV_TO_MEM;
} else {
chan = espi->dma_tx;
buf = t->tx_buf;
@@ -582,7 +580,6 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir)
conf.dst_addr = espi->sspdr_phys;
conf.dst_addr_width = buswidth;
- slave_dirn = DMA_MEM_TO_DEV;
}
ret = dmaengine_slave_config(chan, &conf);
@@ -633,8 +630,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir)
if (!nents)
return ERR_PTR(-ENOMEM);
- txd = dmaengine_prep_slave_sg(chan, sgt->sgl, nents,
- slave_dirn, DMA_CTRL_ACK);
+ txd = dmaengine_prep_slave_sg(chan, sgt->sgl, nents, dir, DMA_CTRL_ACK);
if (!txd) {
dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir);
return ERR_PTR(-ENOMEM);
@@ -651,12 +647,12 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir)
* unmapped.
*/
static void ep93xx_spi_dma_finish(struct ep93xx_spi *espi,
- enum dma_data_direction dir)
+ enum dma_transfer_direction dir)
{
struct dma_chan *chan;
struct sg_table *sgt;
- if (dir == DMA_FROM_DEVICE) {
+ if (dir == DMA_DEV_TO_MEM) {
chan = espi->dma_rx;
sgt = &espi->rx_sgt;
} else {
@@ -677,16 +673,16 @@ static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi)
struct spi_message *msg = espi->current_msg;
struct dma_async_tx_descriptor *rxd, *txd;
- rxd = ep93xx_spi_dma_prepare(espi, DMA_FROM_DEVICE);
+ rxd = ep93xx_spi_dma_prepare(espi, DMA_DEV_TO_MEM);
if (IS_ERR(rxd)) {
dev_err(&espi->pdev->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd));
msg->status = PTR_ERR(rxd);
return;
}
- txd = ep93xx_spi_dma_prepare(espi, DMA_TO_DEVICE);
+ txd = ep93xx_spi_dma_prepare(espi, DMA_MEM_TO_DEV);
if (IS_ERR(txd)) {
- ep93xx_spi_dma_finish(espi, DMA_FROM_DEVICE);
+ ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM);
dev_err(&espi->pdev->dev, "DMA TX failed: %ld\n", PTR_ERR(rxd));
msg->status = PTR_ERR(txd);
return;
@@ -705,8 +701,8 @@ static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi)
wait_for_completion(&espi->wait);
- ep93xx_spi_dma_finish(espi, DMA_TO_DEVICE);
- ep93xx_spi_dma_finish(espi, DMA_FROM_DEVICE);
+ ep93xx_spi_dma_finish(espi, DMA_MEM_TO_DEV);
+ ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM);
}
/**
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 4b6688630b9c..47877d687614 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -37,6 +37,7 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
#include <mach/spi.h>
@@ -759,6 +760,7 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
struct spi_master *master;
struct spi_imx_data *spi_imx;
struct resource *res;
+ struct pinctrl *pinctrl;
int i, ret, num_cs;
if (!np && !mxc_platform_info) {
@@ -846,6 +848,12 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
goto out_iounmap;
}
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl)) {
+ ret = PTR_ERR(pinctrl);
+ goto out_free_irq;
+ }
+
spi_imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(spi_imx->clk_ipg)) {
ret = PTR_ERR(spi_imx->clk_ipg);
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 09c925aaf320..400ae2121a2a 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -1667,9 +1667,15 @@ static int calculate_effective_freq(struct pl022 *pl022, int freq, struct
/* cpsdvsr = 254 & scr = 255 */
min_tclk = spi_rate(rate, CPSDVR_MAX, SCR_MAX);
- if (!((freq <= max_tclk) && (freq >= min_tclk))) {
+ if (freq > max_tclk)
+ dev_warn(&pl022->adev->dev,
+ "Max speed that can be programmed is %d Hz, you requested %d\n",
+ max_tclk, freq);
+
+ if (freq < min_tclk) {
dev_err(&pl022->adev->dev,
- "controller data is incorrect: out of range frequency");
+ "Requested frequency: %d Hz is less than minimum possible %d Hz\n",
+ freq, min_tclk);
return -EINVAL;
}
@@ -1681,26 +1687,37 @@ static int calculate_effective_freq(struct pl022 *pl022, int freq, struct
while (scr <= SCR_MAX) {
tmp = spi_rate(rate, cpsdvsr, scr);
- if (tmp > freq)
+ if (tmp > freq) {
+ /* we need lower freq */
scr++;
+ continue;
+ }
+
/*
- * If found exact value, update and break.
- * If found more closer value, update and continue.
+ * If found exact value, mark found and break.
+ * If found more closer value, update and break.
*/
- else if ((tmp == freq) || (tmp > best_freq)) {
+ if (tmp > best_freq) {
best_freq = tmp;
best_cpsdvsr = cpsdvsr;
best_scr = scr;
if (tmp == freq)
- break;
+ found = 1;
}
- scr++;
+ /*
+ * increased scr will give lower rates, which are not
+ * required
+ */
+ break;
}
cpsdvsr += 2;
scr = SCR_MIN;
}
+ WARN(!best_freq, "pl022: Matching cpsdvsr and scr not found for %d Hz rate \n",
+ freq);
+
clk_freq->cpsdvsr = (u8) (best_cpsdvsr & 0xFF);
clk_freq->scr = (u8) (best_scr & 0xFF);
dev_dbg(&pl022->adev->dev,
@@ -1823,9 +1840,12 @@ static int pl022_setup(struct spi_device *spi)
} else
chip->cs_control = chip_info->cs_control;
- if (bits <= 3) {
- /* PL022 doesn't support less than 4-bits */
+ /* Check bits per word with vendor specific range */
+ if ((bits <= 3) || (bits > pl022->vendor->max_bpw)) {
status = -ENOTSUPP;
+ dev_err(&spi->dev, "illegal data size for this controller!\n");
+ dev_err(&spi->dev, "This controller can only handle 4 <= n <= %d bit words\n",
+ pl022->vendor->max_bpw);
goto err_config_params;
} else if (bits <= 8) {
dev_dbg(&spi->dev, "4 <= n <=8 bits per word\n");
@@ -1838,20 +1858,10 @@ static int pl022_setup(struct spi_device *spi)
chip->read = READING_U16;
chip->write = WRITING_U16;
} else {
- if (pl022->vendor->max_bpw >= 32) {
- dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n");
- chip->n_bytes = 4;
- chip->read = READING_U32;
- chip->write = WRITING_U32;
- } else {
- dev_err(&spi->dev,
- "illegal data size for this controller!\n");
- dev_err(&spi->dev,
- "a standard pl022 can only handle "
- "1 <= n <= 16 bit words\n");
- status = -ENOTSUPP;
- goto err_config_params;
- }
+ dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n");
+ chip->n_bytes = 4;
+ chip->read = READING_U32;
+ chip->write = WRITING_U32;
}
/* Now Initialize all register settings required for this chip */