diff options
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/chipidea/udc.c | 8 | ||||
-rw-r--r-- | drivers/usb/chipidea/udc.h | 4 | ||||
-rw-r--r-- | drivers/usb/core/devio.c | 2 | ||||
-rw-r--r-- | drivers/usb/host/ehci-hcd.c | 3 | ||||
-rw-r--r-- | drivers/usb/misc/appledisplay.c | 1 | ||||
-rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 23 | ||||
-rw-r--r-- | drivers/usb/serial/ftdi_sio_ids.h | 4 | ||||
-rw-r--r-- | drivers/usb/serial/io_ti.c | 2 | ||||
-rw-r--r-- | drivers/usb/serial/option.c | 8 | ||||
-rw-r--r-- | drivers/usb/storage/cypress_atacb.c | 16 |
10 files changed, 54 insertions, 17 deletions
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index f64fbea1cf20..d86333b8c430 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -461,6 +461,8 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) mReq->ptr->page[i] = (mReq->req.dma + i * CI13XXX_PAGE_SIZE) & ~TD_RESERVED_MASK; + wmb(); + if (!list_empty(&mEp->qh.queue)) { struct ci13xxx_req *mReqPrev; int n = hw_ep_bit(mEp->num, mEp->dir); @@ -561,6 +563,12 @@ __acquires(mEp->lock) struct ci13xxx_req *mReq = \ list_entry(mEp->qh.queue.next, struct ci13xxx_req, queue); + + if (mReq->zptr) { + dma_pool_free(mEp->td_pool, mReq->zptr, mReq->zdma); + mReq->zptr = NULL; + } + list_del_init(&mReq->queue); mReq->req.status = -ESHUTDOWN; diff --git a/drivers/usb/chipidea/udc.h b/drivers/usb/chipidea/udc.h index 4ff2384d7ca8..d12e8b59b110 100644 --- a/drivers/usb/chipidea/udc.h +++ b/drivers/usb/chipidea/udc.h @@ -40,7 +40,7 @@ struct ci13xxx_td { #define TD_CURR_OFFSET (0x0FFFUL << 0) #define TD_FRAME_NUM (0x07FFUL << 0) #define TD_RESERVED_MASK (0x0FFFUL << 0) -} __attribute__ ((packed)); +} __attribute__ ((packed, aligned(4))); /* DMA layout of queue heads */ struct ci13xxx_qh { @@ -57,7 +57,7 @@ struct ci13xxx_qh { /* 9 */ u32 RESERVED; struct usb_ctrlrequest setup; -} __attribute__ ((packed)); +} __attribute__ ((packed, aligned(4))); /** * struct ci13xxx_req - usb request representation diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 8823e98989fe..caefc800f298 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -739,6 +739,8 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, index &= 0xff; switch (requesttype & USB_RECIP_MASK) { case USB_RECIP_ENDPOINT: + if ((index & ~USB_DIR_IN) == 0) + return 0; ret = findintfep(ps->dev, index); if (ret >= 0) ret = checkintf(ps, ret); diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 416a6dce5e11..83b5a1725924 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -670,9 +670,6 @@ int ehci_setup(struct usb_hcd *hcd) if (retval) return retval; - if (ehci_is_TDI(ehci)) - tdi_reset(ehci); - ehci_reset(ehci); return 0; diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index 0fc6e5fc745f..ba6a5d6e618e 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -63,6 +63,7 @@ static const struct usb_device_id appledisplay_table[] = { { APPLEDISPLAY_DEVICE(0x9219) }, { APPLEDISPLAY_DEVICE(0x921c) }, { APPLEDISPLAY_DEVICE(0x921d) }, + { APPLEDISPLAY_DEVICE(0x9236) }, /* Terminating entry */ { } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 9886180e45f1..be2dcb036a5e 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -189,6 +189,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_BOOST_PID) }, { USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, @@ -870,7 +871,9 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) }, { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, - { USB_DEVICE(ST_VID, ST_STMCLT1030_PID), + { USB_DEVICE(ST_VID, ST_STMCLT_2232_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(ST_VID, ST_STMCLT_4232_PID), .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk }, { USB_DEVICE(FTDI_VID, FTDI_RF_R106) }, { USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID), @@ -1792,20 +1795,24 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial) } /* - * First and second port on STMCLiteadaptors is reserved for JTAG interface - * and the forth port for pio + * First two ports on JTAG adaptors using an FT4232 such as STMicroelectronics's + * ST Micro Connect Lite are reserved for JTAG or other non-UART interfaces and + * can be accessed from userspace. + * The next two ports are enabled as UARTs by default, where port 2 is + * a conventional RS-232 UART. */ static int ftdi_stmclite_probe(struct usb_serial *serial) { struct usb_device *udev = serial->dev; struct usb_interface *interface = serial->interface; - if (interface == udev->actconfig->interface[2]) - return 0; - - dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n"); + if (interface == udev->actconfig->interface[0] || + interface == udev->actconfig->interface[1]) { + dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n"); + return -ENODEV; + } - return -ENODEV; + return 0; } /* diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index e79861eeed4c..98528270c43c 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -74,6 +74,7 @@ #define FTDI_OPENDCC_THROTTLE_PID 0xBFDA #define FTDI_OPENDCC_GATEWAY_PID 0xBFDB #define FTDI_OPENDCC_GBM_PID 0xBFDC +#define FTDI_OPENDCC_GBM_BOOST_PID 0xBFDD /* NZR SEM 16+ USB (http://www.nzr.de) */ #define FTDI_NZR_SEM_USB_PID 0xC1E0 /* NZR SEM-LOG16+ */ @@ -1150,7 +1151,8 @@ * STMicroelectonics */ #define ST_VID 0x0483 -#define ST_STMCLT1030_PID 0x3747 /* ST Micro Connect Lite STMCLT1030 */ +#define ST_STMCLT_2232_PID 0x3746 +#define ST_STMCLT_4232_PID 0x3747 /* * Papouch products (http://www.papouch.com/) diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 7777172206de..38f2489b289d 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2392,7 +2392,7 @@ static int get_serial_info(struct edgeport_port *edge_port, cwait = edge_port->port->port.closing_wait; if (cwait != ASYNC_CLOSING_WAIT_NONE) - cwait = jiffies_to_msecs(closing_wait) / 10; + cwait = jiffies_to_msecs(cwait) / 10; memset(&tmp, 0, sizeof(tmp)); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 558adfc05007..bff059a19e2f 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -347,6 +347,7 @@ static void option_instat_callback(struct urb *urb); /* Olivetti products */ #define OLIVETTI_VENDOR_ID 0x0b3c #define OLIVETTI_PRODUCT_OLICARD100 0xc000 +#define OLIVETTI_PRODUCT_OLICARD145 0xc003 /* Celot products */ #define CELOT_VENDOR_ID 0x211f @@ -1273,6 +1274,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) }, + { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) }, { USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */ { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/ @@ -1350,6 +1352,12 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x02, 0x01) }, /* D-Link DWM-156 (variant) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x00, 0x00) }, /* D-Link DWM-156 (variant) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c index 070b5c0ebbf9..d9440882cdc9 100644 --- a/drivers/usb/storage/cypress_atacb.c +++ b/drivers/usb/storage/cypress_atacb.c @@ -248,14 +248,26 @@ static int cypress_probe(struct usb_interface *intf, { struct us_data *us; int result; + struct usb_device *device; result = usb_stor_probe1(&us, intf, id, (id - cypress_usb_ids) + cypress_unusual_dev_list); if (result) return result; - us->protocol_name = "Transparent SCSI with Cypress ATACB"; - us->proto_handler = cypress_atacb_passthrough; + /* Among CY7C68300 chips, the A revision does not support Cypress ATACB + * Filter out this revision from EEPROM default descriptor values + */ + device = interface_to_usbdev(intf); + if (device->descriptor.iManufacturer != 0x38 || + device->descriptor.iProduct != 0x4e || + device->descriptor.iSerialNumber != 0x64) { + us->protocol_name = "Transparent SCSI with Cypress ATACB"; + us->proto_handler = cypress_atacb_passthrough; + } else { + us->protocol_name = "Transparent SCSI"; + us->proto_handler = usb_stor_transparent_scsi_command; + } result = usb_stor_probe2(us); return result; |