diff options
Diffstat (limited to 'include/linux/platform_data')
24 files changed, 487 insertions, 101 deletions
diff --git a/include/linux/platform_data/arm-ux500-pm.h b/include/linux/platform_data/arm-ux500-pm.h new file mode 100644 index 000000000000..8dff64b29ec0 --- /dev/null +++ b/include/linux/platform_data/arm-ux500-pm.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) ST-Ericsson SA 2010-2013 + * Author: Rickard Andersson <rickard.andersson@stericsson.com> for + * ST-Ericsson. + * Author: Daniel Lezcano <daniel.lezcano@linaro.org> for Linaro. + * License terms: GNU General Public License (GPL) version 2 + * + */ + +#ifndef ARM_UX500_PM_H +#define ARM_UX500_PM_H + +int prcmu_gic_decouple(void); +int prcmu_gic_recouple(void); +bool prcmu_gic_pending_irq(void); +bool prcmu_pending_irq(void); +bool prcmu_is_cpu_in_wfi(int cpu); +int prcmu_copy_gic_settings(void); +void ux500_pm_init(u32 phy_base, u32 size); + +#endif /* ARM_UX500_PM_H */ diff --git a/include/linux/platform_data/asoc-ux500-msp.h b/include/linux/platform_data/asoc-ux500-msp.h new file mode 100644 index 000000000000..9991aea3d577 --- /dev/null +++ b/include/linux/platform_data/asoc-ux500-msp.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL), version 2. + */ + +#ifndef __MSP_H +#define __MSP_H + +#include <linux/platform_data/dma-ste-dma40.h> + +enum msp_i2s_id { + MSP_I2S_0 = 0, + MSP_I2S_1, + MSP_I2S_2, + MSP_I2S_3, +}; + +/* Platform data structure for a MSP I2S-device */ +struct msp_i2s_platform_data { + enum msp_i2s_id id; + struct stedma40_chan_cfg *msp_i2s_dma_rx; + struct stedma40_chan_cfg *msp_i2s_dma_tx; +}; + +#endif diff --git a/include/linux/platform_data/atmel-aes.h b/include/linux/platform_data/atmel-aes.h deleted file mode 100644 index ab68082fbcb0..000000000000 --- a/include/linux/platform_data/atmel-aes.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef __LINUX_ATMEL_AES_H -#define __LINUX_ATMEL_AES_H - -#include <linux/platform_data/dma-atmel.h> - -/** - * struct aes_dma_data - DMA data for AES - */ -struct aes_dma_data { - struct at_dma_slave txdata; - struct at_dma_slave rxdata; -}; - -/** - * struct aes_platform_data - board-specific AES configuration - * @dma_slave: DMA slave interface to use in data transfers. - */ -struct aes_platform_data { - struct aes_dma_data *dma_slave; -}; - -#endif /* __LINUX_ATMEL_AES_H */ diff --git a/include/linux/platform_data/brcmfmac-sdio.h b/include/linux/platform_data/brcmfmac-sdio.h new file mode 100644 index 000000000000..1ade657d5fc1 --- /dev/null +++ b/include/linux/platform_data/brcmfmac-sdio.h @@ -0,0 +1,124 @@ +/* + * Copyright (c) 2013 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_BRCMFMAC_PLATFORM_H +#define _LINUX_BRCMFMAC_PLATFORM_H + +/* + * Platform specific driver functions and data. Through the platform specific + * device data functions can be provided to help the brcmfmac driver to + * operate with the device in combination with the used platform. + * + * Use the platform data in the following (similar) way: + * + * +#include <brcmfmac_platform.h> + + +static void brcmfmac_power_on(void) +{ +} + +static void brcmfmac_power_off(void) +{ +} + +static void brcmfmac_reset(void) +{ +} + +static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = { + .power_on = brcmfmac_power_on, + .power_off = brcmfmac_power_off, + .reset = brcmfmac_reset +}; + +static struct platform_device brcmfmac_device = { + .name = BRCMFMAC_SDIO_PDATA_NAME, + .id = PLATFORM_DEVID_NONE, + .dev.platform_data = &brcmfmac_sdio_pdata +}; + +void __init brcmfmac_init_pdata(void) +{ + brcmfmac_sdio_pdata.oob_irq_supported = true; + brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB); + brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ | + IORESOURCE_IRQ_HIGHLEVEL; + platform_device_register(&brcmfmac_device); +} + * + * + * Note: the brcmfmac can be loaded as module or be statically built-in into + * the kernel. If built-in then do note that it uses module_init (and + * module_exit) routines which equal device_initcall. So if you intend to + * create a module with the platform specific data for the brcmfmac and have + * it built-in to the kernel then use a higher initcall then device_initcall + * (see init.h). If this is not done then brcmfmac will load without problems + * but will not pickup the platform data. + * + * When the driver does not "detect" platform driver data then it will continue + * without reporting anything and just assume there is no data needed. Which is + * probably true for most platforms. + * + * Explanation of the platform_data fields: + * + * drive_strength: is the preferred drive_strength to be used for the SDIO + * pins. If 0 then a default value will be used. This is the target drive + * strength, the exact drive strength which will be used depends on the + * capabilities of the device. + * + * oob_irq_supported: does the board have support for OOB interrupts. SDIO + * in-band interrupts are relatively slow and for having less overhead on + * interrupt processing an out of band interrupt can be used. If the HW + * supports this then enable this by setting this field to true and configure + * the oob related fields. + * + * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are + * used for registering the irq using request_irq function. + * + * power_on: This function is called by the brcmfmac when the module gets + * loaded. This can be particularly useful for low power devices. The platform + * spcific routine may for example decide to power up the complete device. + * If there is no use-case for this function then provide NULL. + * + * power_off: This function is called by the brcmfmac when the module gets + * unloaded. At this point the device can be powered down or otherwise be reset. + * So if an actual power_off is not supported but reset is then reset the device + * when this function gets called. This can be particularly useful for low power + * devices. If there is no use-case for this function (either power-down or + * reset) then provide NULL. + * + * reset: This function can get called if the device communication broke down. + * This functionality is particularly useful in case of SDIO type devices. It is + * possible to reset a dongle via sdio data interface, but it requires that + * this is fully functional. This function is chip/module specific and this + * function should return only after the complete reset has completed. + */ + +#define BRCMFMAC_SDIO_PDATA_NAME "brcmfmac_sdio" + +struct brcmfmac_sdio_platform_data { + unsigned int drive_strength; + bool oob_irq_supported; + unsigned int oob_irq_nr; + unsigned long oob_irq_flags; + void (*power_on)(void); + void (*power_off)(void); + void (*reset)(void); +}; + +#endif /* _LINUX_BRCMFMAC_PLATFORM_H */ diff --git a/include/linux/platform_data/clk-lpss.h b/include/linux/platform_data/clk-lpss.h new file mode 100644 index 000000000000..528e73ce46d2 --- /dev/null +++ b/include/linux/platform_data/clk-lpss.h @@ -0,0 +1,18 @@ +/* + * Intel Low Power Subsystem clocks. + * + * Copyright (C) 2013, Intel Corporation + * Authors: Mika Westerberg <mika.westerberg@linux.intel.com> + * Rafael J. Wysocki <rafael.j.wysocki@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __CLK_LPSS_H +#define __CLK_LPSS_H + +extern int lpt_clk_init(void); + +#endif /* __CLK_LPSS_H */ diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h index 3af0da1f3be5..320d9c39ea0a 100644 --- a/include/linux/platform_data/clk-ux500.h +++ b/include/linux/platform_data/clk-ux500.h @@ -10,7 +10,8 @@ #ifndef __CLK_UX500_H #define __CLK_UX500_H -void u8500_clk_init(void); +void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, + u32 clkrst5_base, u32 clkrst6_base); void u9540_clk_init(void); void u8540_clk_init(void); diff --git a/include/linux/platform_data/coda.h b/include/linux/platform_data/coda.h new file mode 100644 index 000000000000..6ad4410d9e20 --- /dev/null +++ b/include/linux/platform_data/coda.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2013 Philipp Zabel, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef PLATFORM_CODA_H +#define PLATFORM_CODA_H + +struct device; + +struct coda_platform_data { + struct device *iram_dev; +}; + +#endif diff --git a/include/linux/platform_data/cpsw.h b/include/linux/platform_data/cpsw.h index 798fb80b024b..bb3cd58d71e3 100644 --- a/include/linux/platform_data/cpsw.h +++ b/include/linux/platform_data/cpsw.h @@ -30,7 +30,7 @@ struct cpsw_platform_data { u32 channels; /* number of cpdma channels (symmetric) */ u32 slaves; /* number of slave cpgmac ports */ struct cpsw_slave_data *slave_data; - u32 cpts_active_slave; /* time stamping slave */ + u32 active_slave; /* time stamping, ethtool and SIOCGMIIPHY slave */ u32 cpts_clock_mult; /* convert input clock ticks to nanoseconds */ u32 cpts_clock_shift; /* convert input clock ticks to nanoseconds */ u32 ale_entries; /* ale table size */ diff --git a/include/linux/platform_data/crypto-atmel.h b/include/linux/platform_data/crypto-atmel.h new file mode 100644 index 000000000000..b46e0d9062a0 --- /dev/null +++ b/include/linux/platform_data/crypto-atmel.h @@ -0,0 +1,22 @@ +#ifndef __LINUX_CRYPTO_ATMEL_H +#define __LINUX_CRYPTO_ATMEL_H + +#include <linux/platform_data/dma-atmel.h> + +/** + * struct crypto_dma_data - DMA data for AES/TDES/SHA + */ +struct crypto_dma_data { + struct at_dma_slave txdata; + struct at_dma_slave rxdata; +}; + +/** + * struct crypto_platform_data - board-specific AES/TDES/SHA configuration + * @dma_slave: DMA slave interface to use in data transfers. + */ +struct crypto_platform_data { + struct crypto_dma_data *dma_slave; +}; + +#endif /* __LINUX_CRYPTO_ATMEL_H */ diff --git a/include/linux/platform_data/dwc3-omap.h b/include/linux/platform_data/dwc3-omap.h index ada401244e0b..1d36ca874cc8 100644 --- a/include/linux/platform_data/dwc3-omap.h +++ b/include/linux/platform_data/dwc3-omap.h @@ -41,7 +41,3 @@ enum dwc3_omap_utmi_mode { DWC3_OMAP_UTMI_MODE_HW, DWC3_OMAP_UTMI_MODE_SW, }; - -struct dwc3_omap_data { - enum dwc3_omap_utmi_mode utmi_mode; -}; diff --git a/include/linux/platform_data/emif_plat.h b/include/linux/platform_data/emif_plat.h index 03378ca84061..5c19a2a647c4 100644 --- a/include/linux/platform_data/emif_plat.h +++ b/include/linux/platform_data/emif_plat.h @@ -40,6 +40,7 @@ /* Custom config requests */ #define EMIF_CUSTOM_CONFIG_LPMODE 0x00000001 #define EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL 0x00000002 +#define EMIF_CUSTOM_CONFIG_EXTENDED_TEMP_PART 0x00000004 #ifndef __ASSEMBLY__ /** diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h index 1509570d5a3f..202e290faea8 100644 --- a/include/linux/platform_data/leds-lp55xx.h +++ b/include/linux/platform_data/leds-lp55xx.h @@ -20,18 +20,6 @@ #define LP55XX_CLOCK_INT 1 #define LP55XX_CLOCK_EXT 2 -/* Bits in LP5521 CONFIG register. 'update_config' in lp55xx_platform_data */ -#define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */ -#define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */ -#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */ -#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */ -#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */ -#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */ -#define LP5521_R_TO_BATT 4 /* R out: 0 = CP, 1 = Vbat */ -#define LP5521_CLK_SRC_EXT 0 /* Ext-clk source (CLK_32K) */ -#define LP5521_CLK_INT 1 /* Internal clock */ -#define LP5521_CLK_AUTO 2 /* Automatic clock selection */ - struct lp55xx_led_config { const char *name; u8 chan_nr; @@ -40,9 +28,9 @@ struct lp55xx_led_config { }; struct lp55xx_predef_pattern { - u8 *r; - u8 *g; - u8 *b; + const u8 *r; + const u8 *g; + const u8 *b; u8 size_r; u8 size_g; u8 size_b; @@ -79,9 +67,6 @@ struct lp55xx_platform_data { /* Predefined pattern data */ struct lp55xx_predef_pattern *patterns; unsigned int num_patterns; - - /* _CONFIG register */ - u8 update_config; }; #endif /* _LEDS_LP55XX_H */ diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h index 20ee8b221dbd..ea3200527dd3 100644 --- a/include/linux/platform_data/lp855x.h +++ b/include/linux/platform_data/lp855x.h @@ -69,11 +69,6 @@ enum lp855x_chip_id { LP8557, }; -enum lp855x_brightness_ctrl_mode { - PWM_BASED = 1, - REGISTER_BASED, -}; - enum lp8550_brighntess_source { LP8550_PWM_ONLY, LP8550_I2C_ONLY = 2, @@ -116,24 +111,18 @@ struct lp855x_rom_data { /** * struct lp855x_platform_data * @name : Backlight driver name. If it is not defined, default name is set. - * @mode : brightness control by pwm or lp855x register * @device_control : value of DEVICE CONTROL register * @initial_brightness : initial value of backlight brightness * @period_ns : platform specific pwm period value. unit is nano. Only valid when mode is PWM_BASED. - * @load_new_rom_data : - 0 : use default configuration data - 1 : update values of eeprom or eprom registers on loading driver * @size_program : total size of lp855x_rom_data * @rom_data : list of new eeprom/eprom registers */ struct lp855x_platform_data { - char *name; - enum lp855x_brightness_ctrl_mode mode; + const char *name; u8 device_control; - int initial_brightness; + u8 initial_brightness; unsigned int period_ns; - u8 load_new_rom_data; int size_program; struct lp855x_rom_data *rom_data; }; diff --git a/include/linux/platform_data/mmc-davinci.h b/include/linux/platform_data/mmc-davinci.h index 5ba6b22ce338..9cea4ee377b5 100644 --- a/include/linux/platform_data/mmc-davinci.h +++ b/include/linux/platform_data/mmc-davinci.h @@ -23,9 +23,6 @@ struct davinci_mmc_config { /* any additional host capabilities: OR'd in to mmc->f_caps */ u32 caps; - /* Version of the MMC/SD controller */ - u8 version; - /* Number of sg segments */ u8 nr_sg; }; diff --git a/include/linux/platform_data/mmc-sdhci-s3c.h b/include/linux/platform_data/mmc-sdhci-s3c.h new file mode 100644 index 000000000000..249f02387a35 --- /dev/null +++ b/include/linux/platform_data/mmc-sdhci-s3c.h @@ -0,0 +1,56 @@ +#ifndef __PLATFORM_DATA_SDHCI_S3C_H +#define __PLATFORM_DATA_SDHCI_S3C_H + +struct platform_device; + +enum cd_types { + S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */ + S3C_SDHCI_CD_EXTERNAL, /* use external callback */ + S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */ + S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */ + S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */ +}; + +/** + * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI + * @max_width: The maximum number of data bits supported. + * @host_caps: Standard MMC host capabilities bit field. + * @host_caps2: The second standard MMC host capabilities bit field. + * @cd_type: Type of Card Detection method (see cd_types enum above) + * @ext_cd_init: Initialize external card detect subsystem. Called on + * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL. + * notify_func argument is a callback to the sdhci-s3c driver + * that triggers the card detection event. Callback arguments: + * dev is pointer to platform device of the host controller, + * state is new state of the card (0 - removed, 1 - inserted). + * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on + * sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL. + * notify_func argument is the same callback as for ext_cd_init. + * @ext_cd_gpio: gpio pin used for external CD line, valid only if + * cd_type == S3C_SDHCI_CD_GPIO + * @ext_cd_gpio_invert: invert values for external CD gpio line + * @cfg_gpio: Configure the GPIO for a specific card bit-width + * + * Initialisation data specific to either the machine or the platform + * for the device driver to use or call-back when configuring gpio or + * card speed information. +*/ +struct s3c_sdhci_platdata { + unsigned int max_width; + unsigned int host_caps; + unsigned int host_caps2; + unsigned int pm_caps; + enum cd_types cd_type; + + int ext_cd_gpio; + bool ext_cd_gpio_invert; + int (*ext_cd_init)(void (*notify_func)(struct platform_device *, + int state)); + int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *, + int state)); + + void (*cfg_gpio)(struct platform_device *dev, int width); +}; + + +#endif /* __PLATFORM_DATA_SDHCI_S3C_H */ diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h index 944b01dd103e..98b7925f1a2d 100644 --- a/include/linux/platform_data/mv_usb.h +++ b/include/linux/platform_data/mv_usb.h @@ -34,8 +34,6 @@ struct mv_usb_addon_irq { }; struct mv_usb_platform_data { - unsigned int clknum; - char **clkname; struct mv_usb_addon_irq *id; /* Only valid for OTG. ID pin change*/ struct mv_usb_addon_irq *vbus; /* valid for OTG/UDC. VBUS change*/ diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h index 88734e871e3a..c7285b575462 100644 --- a/include/linux/platform_data/ntc_thermistor.h +++ b/include/linux/platform_data/ntc_thermistor.h @@ -21,6 +21,8 @@ #ifndef _LINUX_NTC_H #define _LINUX_NTC_H +struct iio_channel; + enum ntc_thermistor_type { TYPE_NCPXXWB473, TYPE_NCPXXWL333, @@ -39,13 +41,17 @@ struct ntc_thermistor_platform_data { * described at Documentation/hwmon/ntc_thermistor * * pullup/down_ohm: 0 for infinite / not-connected + * + * chan: iio_channel pointer to communicate with the ADC which the + * thermistor is using for conversion of the analog values. */ - int (*read_uV)(void); - unsigned int pullup_uV; + int (*read_uv)(struct ntc_thermistor_platform_data *); + unsigned int pullup_uv; unsigned int pullup_ohm; unsigned int pulldown_ohm; enum { NTC_CONNECTED_POSITIVE, NTC_CONNECTED_GROUND } connect; + struct iio_channel *chan; int (*read_ohm)(void); }; diff --git a/include/linux/platform_data/serial-sccnxp.h b/include/linux/platform_data/serial-sccnxp.h index 215574d1e81d..bdc510d03245 100644 --- a/include/linux/platform_data/serial-sccnxp.h +++ b/include/linux/platform_data/serial-sccnxp.h @@ -86,10 +86,6 @@ struct sccnxp_pdata { const u32 mctrl_cfg[SCCNXP_MAX_UARTS]; /* Timer value for polling mode (usecs) */ const unsigned int poll_time_us; - /* Called during startup */ - void (*init)(void); - /* Called before finish */ - void (*exit)(void); }; #endif diff --git a/include/linux/platform_data/si5351.h b/include/linux/platform_data/si5351.h new file mode 100644 index 000000000000..92dabcaf6499 --- /dev/null +++ b/include/linux/platform_data/si5351.h @@ -0,0 +1,114 @@ +/* + * Si5351A/B/C programmable clock generator platform_data. + */ + +#ifndef __LINUX_PLATFORM_DATA_SI5351_H__ +#define __LINUX_PLATFORM_DATA_SI5351_H__ + +struct clk; + +/** + * enum si5351_variant - SiLabs Si5351 chip variant + * @SI5351_VARIANT_A: Si5351A (8 output clocks, XTAL input) + * @SI5351_VARIANT_A3: Si5351A MSOP10 (3 output clocks, XTAL input) + * @SI5351_VARIANT_B: Si5351B (8 output clocks, XTAL/VXCO input) + * @SI5351_VARIANT_C: Si5351C (8 output clocks, XTAL/CLKIN input) + */ +enum si5351_variant { + SI5351_VARIANT_A = 1, + SI5351_VARIANT_A3 = 2, + SI5351_VARIANT_B = 3, + SI5351_VARIANT_C = 4, +}; + +/** + * enum si5351_pll_src - Si5351 pll clock source + * @SI5351_PLL_SRC_DEFAULT: default, do not change eeprom config + * @SI5351_PLL_SRC_XTAL: pll source clock is XTAL input + * @SI5351_PLL_SRC_CLKIN: pll source clock is CLKIN input (Si5351C only) + */ +enum si5351_pll_src { + SI5351_PLL_SRC_DEFAULT = 0, + SI5351_PLL_SRC_XTAL = 1, + SI5351_PLL_SRC_CLKIN = 2, +}; + +/** + * enum si5351_multisynth_src - Si5351 multisynth clock source + * @SI5351_MULTISYNTH_SRC_DEFAULT: default, do not change eeprom config + * @SI5351_MULTISYNTH_SRC_VCO0: multisynth source clock is VCO0 + * @SI5351_MULTISYNTH_SRC_VCO1: multisynth source clock is VCO1/VXCO + */ +enum si5351_multisynth_src { + SI5351_MULTISYNTH_SRC_DEFAULT = 0, + SI5351_MULTISYNTH_SRC_VCO0 = 1, + SI5351_MULTISYNTH_SRC_VCO1 = 2, +}; + +/** + * enum si5351_clkout_src - Si5351 clock output clock source + * @SI5351_CLKOUT_SRC_DEFAULT: default, do not change eeprom config + * @SI5351_CLKOUT_SRC_MSYNTH_N: clkout N source clock is multisynth N + * @SI5351_CLKOUT_SRC_MSYNTH_0_4: clkout N source clock is multisynth 0 (N<4) + * or 4 (N>=4) + * @SI5351_CLKOUT_SRC_XTAL: clkout N source clock is XTAL + * @SI5351_CLKOUT_SRC_CLKIN: clkout N source clock is CLKIN (Si5351C only) + */ +enum si5351_clkout_src { + SI5351_CLKOUT_SRC_DEFAULT = 0, + SI5351_CLKOUT_SRC_MSYNTH_N = 1, + SI5351_CLKOUT_SRC_MSYNTH_0_4 = 2, + SI5351_CLKOUT_SRC_XTAL = 3, + SI5351_CLKOUT_SRC_CLKIN = 4, +}; + +/** + * enum si5351_drive_strength - Si5351 clock output drive strength + * @SI5351_DRIVE_DEFAULT: default, do not change eeprom config + * @SI5351_DRIVE_2MA: 2mA clock output drive strength + * @SI5351_DRIVE_4MA: 4mA clock output drive strength + * @SI5351_DRIVE_6MA: 6mA clock output drive strength + * @SI5351_DRIVE_8MA: 8mA clock output drive strength + */ +enum si5351_drive_strength { + SI5351_DRIVE_DEFAULT = 0, + SI5351_DRIVE_2MA = 2, + SI5351_DRIVE_4MA = 4, + SI5351_DRIVE_6MA = 6, + SI5351_DRIVE_8MA = 8, +}; + +/** + * struct si5351_clkout_config - Si5351 clock output configuration + * @clkout: clkout number + * @multisynth_src: multisynth source clock + * @clkout_src: clkout source clock + * @pll_master: if true, clkout can also change pll rate + * @drive: output drive strength + * @rate: initial clkout rate, or default if 0 + */ +struct si5351_clkout_config { + enum si5351_multisynth_src multisynth_src; + enum si5351_clkout_src clkout_src; + enum si5351_drive_strength drive; + bool pll_master; + unsigned long rate; +}; + +/** + * struct si5351_platform_data - Platform data for the Si5351 clock driver + * @variant: Si5351 chip variant + * @clk_xtal: xtal input clock + * @clk_clkin: clkin input clock + * @pll_src: array of pll source clock setting + * @clkout: array of clkout configuration + */ +struct si5351_platform_data { + enum si5351_variant variant; + struct clk *clk_xtal; + struct clk *clk_clkin; + enum si5351_pll_src pll_src[2]; + struct si5351_clkout_config clkout[8]; +}; + +#endif diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h index ceba18d23a5a..8447f634c7f5 100644 --- a/include/linux/platform_data/spi-s3c64xx.h +++ b/include/linux/platform_data/spi-s3c64xx.h @@ -11,6 +11,8 @@ #ifndef __S3C64XX_PLAT_SPI_H #define __S3C64XX_PLAT_SPI_H +#include <linux/dmaengine.h> + struct platform_device; /** @@ -38,6 +40,7 @@ struct s3c64xx_spi_info { int src_clk_nr; int num_cs; int (*cfg_gpio)(void); + dma_filter_fn filter; }; /** diff --git a/include/linux/platform_data/st1232_pdata.h b/include/linux/platform_data/st1232_pdata.h new file mode 100644 index 000000000000..cac3e7b4c454 --- /dev/null +++ b/include/linux/platform_data/st1232_pdata.h @@ -0,0 +1,13 @@ +#ifndef _LINUX_ST1232_PDATA_H +#define _LINUX_ST1232_PDATA_H + +/* + * Optional platform data + * + * Use this if you want the driver to drive the reset pin. + */ +struct st1232_pdata { + int reset_gpio; +}; + +#endif diff --git a/include/linux/platform_data/usb-exynos.h b/include/linux/platform_data/usb-ohci-exynos.h index c256c595be5e..c256c595be5e 100644 --- a/include/linux/platform_data/usb-exynos.h +++ b/include/linux/platform_data/usb-ohci-exynos.h diff --git a/include/linux/platform_data/video-vt8500lcdfb.h b/include/linux/platform_data/video-vt8500lcdfb.h deleted file mode 100644 index 7f399c370fe0..000000000000 --- a/include/linux/platform_data/video-vt8500lcdfb.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * VT8500/WM8505 Frame Buffer platform data definitions - * - * Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _VT8500FB_H -#define _VT8500FB_H - -#include <linux/fb.h> - -struct vt8500fb_platform_data { - struct fb_videomode mode; - u32 xres_virtual; - u32 yres_virtual; - u32 bpp; - unsigned long video_mem_phys; - void *video_mem_virt; - unsigned long video_mem_len; -}; - -#endif /* _VT8500FB_H */ diff --git a/include/linux/platform_data/video_s3c.h b/include/linux/platform_data/video_s3c.h new file mode 100644 index 000000000000..48883995f47f --- /dev/null +++ b/include/linux/platform_data/video_s3c.h @@ -0,0 +1,54 @@ +#ifndef __PLATFORM_DATA_VIDEO_S3C +#define __PLATFORM_DATA_VIDEO_S3C + +/* S3C_FB_MAX_WIN + * Set to the maximum number of windows that any of the supported hardware + * can use. Since the platform data uses this for an array size, having it + * set to the maximum of any version of the hardware can do is safe. + */ +#define S3C_FB_MAX_WIN (5) + +/** + * struct s3c_fb_pd_win - per window setup data + * @xres : The window X size. + * @yres : The window Y size. + * @virtual_x: The virtual X size. + * @virtual_y: The virtual Y size. + */ +struct s3c_fb_pd_win { + unsigned short default_bpp; + unsigned short max_bpp; + unsigned short xres; + unsigned short yres; + unsigned short virtual_x; + unsigned short virtual_y; +}; + +/** + * struct s3c_fb_platdata - S3C driver platform specific information + * @setup_gpio: Setup the external GPIO pins to the right state to transfer + * the data from the display system to the connected display + * device. + * @vidcon0: The base vidcon0 values to control the panel data format. + * @vidcon1: The base vidcon1 values to control the panel data output. + * @vtiming: Video timing when connected to a RGB type panel. + * @win: The setup data for each hardware window, or NULL for unused. + * @display_mode: The LCD output display mode. + * + * The platform data supplies the video driver with all the information + * it requires to work with the display(s) attached to the machine. It + * controls the initial mode, the number of display windows (0 is always + * the base framebuffer) that are initialised etc. + * + */ +struct s3c_fb_platdata { + void (*setup_gpio)(void); + + struct s3c_fb_pd_win *win[S3C_FB_MAX_WIN]; + struct fb_videomode *vtiming; + + u32 vidcon0; + u32 vidcon1; +}; + +#endif |