diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-powerpc/pmac_feature.h | 4 | ||||
| -rw-r--r-- | include/asm-powerpc/pmac_low_i2c.h | 85 | ||||
| -rw-r--r-- | include/asm-powerpc/smu.h | 12 | ||||
| -rw-r--r-- | include/linux/pmu.h | 8 |
4 files changed, 78 insertions, 31 deletions
diff --git a/include/asm-powerpc/pmac_feature.h b/include/asm-powerpc/pmac_feature.h index f6997ed5179e..e654ad0e5b42 100644 --- a/include/asm-powerpc/pmac_feature.h +++ b/include/asm-powerpc/pmac_feature.h @@ -318,10 +318,6 @@ extern void pmac_register_agp_pm(struct pci_dev *bridge, extern void pmac_suspend_agp_for_card(struct pci_dev *dev); extern void pmac_resume_agp_for_card(struct pci_dev *dev); -/* Used by the via-pmu driver for suspend/resume - */ -extern void pmac_tweak_clock_spreading(int enable); - /* * The part below is for use by macio_asic.c only, do not rely * on the data structures or constants below in a normal driver diff --git a/include/asm-powerpc/pmac_low_i2c.h b/include/asm-powerpc/pmac_low_i2c.h index 3fb8d51540dd..adf4fa956572 100644 --- a/include/asm-powerpc/pmac_low_i2c.h +++ b/include/asm-powerpc/pmac_low_i2c.h @@ -15,30 +15,87 @@ /* i2c mode (based on the platform functions format) */ enum { - pmac_low_i2c_mode_dumb = 1, - pmac_low_i2c_mode_std = 2, - pmac_low_i2c_mode_stdsub = 3, - pmac_low_i2c_mode_combined = 4, + pmac_i2c_mode_dumb = 1, + pmac_i2c_mode_std = 2, + pmac_i2c_mode_stdsub = 3, + pmac_i2c_mode_combined = 4, }; /* RW bit in address */ enum { - pmac_low_i2c_read = 0x01, - pmac_low_i2c_write = 0x00 + pmac_i2c_read = 0x01, + pmac_i2c_write = 0x00 }; +/* i2c bus type */ +enum { + pmac_i2c_bus_keywest = 0, + pmac_i2c_bus_pmu = 1, + pmac_i2c_bus_smu = 2, +}; + +/* i2c bus features */ +enum { + /* can_largesub : supports >1 byte subaddresses (SMU only) */ + pmac_i2c_can_largesub = 0x00000001u, + + /* multibus : device node holds multiple busses, bus number is + * encoded in bits 0xff00 of "reg" of a given device + */ + pmac_i2c_multibus = 0x00000002u, +}; + +/* i2c busses in the system */ +struct pmac_i2c_bus; +struct i2c_adapter; + /* Init, called early during boot */ -extern void pmac_init_low_i2c(void); +extern int pmac_i2c_init(void); + +/* Lookup an i2c bus for a device-node. The node can be either the bus + * node itself or a device below it. In the case of a multibus, the bus + * node itself is the controller node, else, it's a child of the controller + * node + */ +extern struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node); + +/* Get the address for an i2c device. This strips the bus number if + * necessary. The 7 bits address is returned 1 bit right shifted so that the + * direction can be directly ored in + */ +extern u8 pmac_i2c_get_dev_addr(struct device_node *device); + +/* Get infos about a bus */ +extern struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus); +extern struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus); +extern int pmac_i2c_get_type(struct pmac_i2c_bus *bus); +extern int pmac_i2c_get_flags(struct pmac_i2c_bus *bus); + +/* i2c layer adapter attach/detach */ +extern void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus, + struct i2c_adapter *adapter); +extern void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus, + struct i2c_adapter *adapter); +extern struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus); + +/* March a device or bus with an i2c adapter structure, to be used by drivers + * to match device-tree nodes with i2c adapters during adapter discovery + * callbacks + */ +extern int pmac_i2c_match_adapter(struct device_node *dev, + struct i2c_adapter *adapter); + -/* Locking functions exposed to i2c-keywest */ -int pmac_low_i2c_lock(struct device_node *np); -int pmac_low_i2c_unlock(struct device_node *np); +/* (legacy) Locking functions exposed to i2c-keywest */ +extern int pmac_low_i2c_lock(struct device_node *np); +extern int pmac_low_i2c_unlock(struct device_node *np); /* Access functions for platform code */ -int pmac_low_i2c_open(struct device_node *np, int channel); -int pmac_low_i2c_close(struct device_node *np); -int pmac_low_i2c_setmode(struct device_node *np, int mode); -int pmac_low_i2c_xfer(struct device_node *np, u8 addrdir, u8 subaddr, u8 *data, int len); +extern int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled); +extern void pmac_i2c_close(struct pmac_i2c_bus *bus); +extern int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode); +extern int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, + u32 subaddr, u8 *data, int len); #endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/smu.h b/include/asm-powerpc/smu.h index 7fae3ce9a8c1..134c2b5be0f2 100644 --- a/include/asm-powerpc/smu.h +++ b/include/asm-powerpc/smu.h @@ -358,6 +358,9 @@ extern unsigned long smu_cmdbuf_abs; * Kenrel asynchronous i2c interface */ +#define SMU_I2C_READ_MAX 0x1d +#define SMU_I2C_WRITE_MAX 0x15 + /* SMU i2c header, exactly matches i2c header on wire */ struct smu_i2c_param { @@ -368,12 +371,9 @@ struct smu_i2c_param u8 subaddr[3]; /* subaddress */ u8 caddr; /* combined address, filled by SMU driver */ u8 datalen; /* length of transfer */ - u8 data[7]; /* data */ + u8 data[SMU_I2C_READ_MAX]; /* data */ }; -#define SMU_I2C_READ_MAX 0x0d -#define SMU_I2C_WRITE_MAX 0x05 - struct smu_i2c_cmd { /* public */ @@ -387,7 +387,7 @@ struct smu_i2c_cmd int read; int stage; int retries; - u8 pdata[0x10]; + u8 pdata[32]; struct list_head link; }; @@ -519,7 +519,7 @@ struct smu_sdbp_cpupiddata { * if not found. The data format is described below */ extern struct smu_sdbp_header *smu_get_sdb_partition(int id, - unsigned int *size); + unsigned int *size); #endif /* __KERNEL__ */ diff --git a/include/linux/pmu.h b/include/linux/pmu.h index 373bd3b9b330..217d3daf7336 100644 --- a/include/linux/pmu.h +++ b/include/linux/pmu.h @@ -140,7 +140,7 @@ extern int find_via_pmu(void); extern int pmu_request(struct adb_request *req, void (*done)(struct adb_request *), int nbytes, ...); - +extern int pmu_queue_request(struct adb_request *req); extern void pmu_poll(void); extern void pmu_poll_adb(void); /* For use by xmon */ extern void pmu_wait_complete(struct adb_request *req); @@ -160,12 +160,6 @@ extern void pmu_unlock(void); extern int pmu_present(void); extern int pmu_get_model(void); -extern int pmu_i2c_combined_read(int bus, int addr, int subaddr, u8* data, int len); -extern int pmu_i2c_stdsub_write(int bus, int addr, int subaddr, u8* data, int len); -extern int pmu_i2c_simple_read(int bus, int addr, u8* data, int len); -extern int pmu_i2c_simple_write(int bus, int addr, u8* data, int len); - - #ifdef CONFIG_PM /* * Stuff for putting the powerbook to sleep and waking it again. |