diff options
Diffstat (limited to 'include')
119 files changed, 2616 insertions, 662 deletions
diff --git a/include/asm-generic/bitops/builtin-__ffs.h b/include/asm-generic/bitops/builtin-__ffs.h new file mode 100644 index 000000000000..90041e3a41f0 --- /dev/null +++ b/include/asm-generic/bitops/builtin-__ffs.h @@ -0,0 +1,15 @@ +#ifndef _ASM_GENERIC_BITOPS_BUILTIN___FFS_H_ +#define _ASM_GENERIC_BITOPS_BUILTIN___FFS_H_ + +/** + * __ffs - find first bit in word. + * @word: The word to search + * + * Undefined if no bit exists, so code should check against 0 first. + */ +static __always_inline unsigned long __ffs(unsigned long word) +{ + return __builtin_ctzl(word); +} + +#endif diff --git a/include/asm-generic/bitops/builtin-__fls.h b/include/asm-generic/bitops/builtin-__fls.h new file mode 100644 index 000000000000..0248f386635f --- /dev/null +++ b/include/asm-generic/bitops/builtin-__fls.h @@ -0,0 +1,15 @@ +#ifndef _ASM_GENERIC_BITOPS_BUILTIN___FLS_H_ +#define _ASM_GENERIC_BITOPS_BUILTIN___FLS_H_ + +/** + * __fls - find last (most-significant) set bit in a long word + * @word: the word to search + * + * Undefined if no set bit exists, so code should check against 0 first. + */ +static __always_inline unsigned long __fls(unsigned long word) +{ + return (sizeof(word) * 8) - 1 - __builtin_clzl(word); +} + +#endif diff --git a/include/asm-generic/bitops/builtin-ffs.h b/include/asm-generic/bitops/builtin-ffs.h new file mode 100644 index 000000000000..064825829e1c --- /dev/null +++ b/include/asm-generic/bitops/builtin-ffs.h @@ -0,0 +1,17 @@ +#ifndef _ASM_GENERIC_BITOPS_BUILTIN_FFS_H_ +#define _ASM_GENERIC_BITOPS_BUILTIN_FFS_H_ + +/** + * ffs - find first bit set + * @x: the word to search + * + * This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ +static __always_inline int ffs(int x) +{ + return __builtin_ffs(x); +} + +#endif diff --git a/include/asm-generic/bitops/builtin-fls.h b/include/asm-generic/bitops/builtin-fls.h new file mode 100644 index 000000000000..eda652d0ac7f --- /dev/null +++ b/include/asm-generic/bitops/builtin-fls.h @@ -0,0 +1,16 @@ +#ifndef _ASM_GENERIC_BITOPS_BUILTIN_FLS_H_ +#define _ASM_GENERIC_BITOPS_BUILTIN_FLS_H_ + +/** + * fls - find last (most-significant) bit set + * @x: the word to search + * + * This is defined the same way as ffs. + * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. + */ +static __always_inline int fls(int x) +{ + return x ? sizeof(x) * 8 - __builtin_clz(x) : 0; +} + +#endif diff --git a/include/asm-generic/unistd.h b/include/asm-generic/unistd.h index 991ef01cd77e..3748ec92dcbc 100644 --- a/include/asm-generic/unistd.h +++ b/include/asm-generic/unistd.h @@ -691,9 +691,11 @@ __SC_COMP(__NR_process_vm_readv, sys_process_vm_readv, \ #define __NR_process_vm_writev 271 __SC_COMP(__NR_process_vm_writev, sys_process_vm_writev, \ compat_sys_process_vm_writev) +#define __NR_kcmp 272 +__SYSCALL(__NR_kcmp, sys_kcmp) #undef __NR_syscalls -#define __NR_syscalls 272 +#define __NR_syscalls 273 /* * All syscalls below here should go away really, diff --git a/include/clocksource/arm_generic.h b/include/clocksource/arm_generic.h new file mode 100644 index 000000000000..5b41b0d27f0f --- /dev/null +++ b/include/clocksource/arm_generic.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2012 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef __CLKSOURCE_ARM_GENERIC_H +#define __CLKSOURCE_ARM_GENERIC_H + +extern int arm_generic_timer_init(void); + +#endif diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 4f2a76224509..90be98981102 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -138,9 +138,9 @@ void acpi_penalize_isa_irq(int irq, int active); void acpi_pci_irq_disable (struct pci_dev *dev); struct acpi_pci_driver { - struct acpi_pci_driver *next; - int (*add)(acpi_handle handle); - void (*remove)(acpi_handle handle); + struct list_head node; + int (*add)(struct acpi_pci_root *root); + void (*remove)(struct acpi_pci_root *root); }; int acpi_pci_register_driver(struct acpi_pci_driver *driver); diff --git a/include/linux/atmel_tc.h b/include/linux/atmel_tc.h index 1d14b1dc1aee..89a931babecf 100644 --- a/include/linux/atmel_tc.h +++ b/include/linux/atmel_tc.h @@ -63,7 +63,7 @@ struct atmel_tc { struct platform_device *pdev; struct resource *iomem; void __iomem *regs; - struct atmel_tcb_config *tcb_config; + const struct atmel_tcb_config *tcb_config; int irq[3]; struct clk *clk[3]; struct list_head node; diff --git a/include/linux/bcd.h b/include/linux/bcd.h index 22ea563ba3eb..18fff11fb3ea 100644 --- a/include/linux/bcd.h +++ b/include/linux/bcd.h @@ -3,7 +3,20 @@ #include <linux/compiler.h> -unsigned bcd2bin(unsigned char val) __attribute_const__; -unsigned char bin2bcd(unsigned val) __attribute_const__; +#define bcd2bin(x) \ + (__builtin_constant_p((u8 )(x)) ? \ + const_bcd2bin(x) : \ + _bcd2bin(x)) + +#define bin2bcd(x) \ + (__builtin_constant_p((u8 )(x)) ? \ + const_bin2bcd(x) : \ + _bin2bcd(x)) + +#define const_bcd2bin(x) (((x) & 0x0f) + ((x) >> 4) * 10) +#define const_bin2bcd(x) ((((x) / 10) << 4) + (x) % 10) + +unsigned _bcd2bin(unsigned char val) __attribute_const__; +unsigned char _bin2bcd(unsigned val) __attribute_const__; #endif /* _BCD_H */ diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 77335fac943e..c12731582920 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -26,6 +26,7 @@ #define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */ #define CLK_IS_ROOT BIT(4) /* root clk, has no parent */ #define CLK_IS_BASIC BIT(5) /* Basic clk, can't do a to_clk_foo() */ +#define CLK_GET_RATE_NOCACHE BIT(6) /* do not use the cached clk rate */ struct clk_hw; @@ -360,6 +361,11 @@ int of_clk_add_provider(struct device_node *np, void of_clk_del_provider(struct device_node *np); struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec, void *data); +struct clk_onecell_data { + struct clk **clks; + unsigned int clk_num; +}; +struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data); const char *of_clk_get_parent_name(struct device_node *np, int index); void of_clk_init(const struct of_device_id *matches); diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h index 2f4079175afb..934bc34d5f99 100644 --- a/include/linux/compiler-gcc4.h +++ b/include/linux/compiler-gcc4.h @@ -49,6 +49,13 @@ #endif #endif +#if __GNUC_MINOR__ >= 6 +/* + * Tell the optimizer that something else uses this function or variable. + */ +#define __visible __attribute__((externally_visible)) +#endif + #if __GNUC_MINOR__ > 0 #define __compiletime_object_size(obj) __builtin_object_size(obj, 0) #endif diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 923d093c9cea..f430e4162f41 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -278,6 +278,10 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); # define __section(S) __attribute__ ((__section__(#S))) #endif +#ifndef __visible +#define __visible +#endif + /* Are two types/vars the same type (ignoring qualifiers)? */ #ifndef __same_type # define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b)) diff --git a/include/linux/dcache.h b/include/linux/dcache.h index caa34e50537e..59200795482e 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -206,6 +206,8 @@ struct dentry_operations { #define DCACHE_MANAGED_DENTRY \ (DCACHE_MOUNTED|DCACHE_NEED_AUTOMOUNT|DCACHE_MANAGE_TRANSIT) +#define DCACHE_DENTRY_KILLED 0x100000 + extern seqlock_t rename_lock; static inline int dname_external(struct dentry *dentry) diff --git a/include/linux/device.h b/include/linux/device.h index 52a5f15a2223..af92883bb4a6 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -536,6 +536,10 @@ extern void *__devres_alloc(dr_release_t release, size_t size, gfp_t gfp, #else extern void *devres_alloc(dr_release_t release, size_t size, gfp_t gfp); #endif +extern void devres_for_each_res(struct device *dev, dr_release_t release, + dr_match_t match, void *match_data, + void (*fn)(struct device *, void *, void *), + void *data); extern void devres_free(void *res); extern void devres_add(struct device *dev, void *res); extern void *devres_find(struct device *dev, dr_release_t release, @@ -891,12 +895,15 @@ extern const char *dev_driver_string(const struct device *dev); #ifdef CONFIG_PRINTK -extern int __dev_printk(const char *level, const struct device *dev, - struct va_format *vaf); +extern __printf(3, 0) +int dev_vprintk_emit(int level, const struct device *dev, + const char *fmt, va_list args); +extern __printf(3, 4) +int dev_printk_emit(int level, const struct device *dev, const char *fmt, ...); + extern __printf(3, 4) int dev_printk(const char *level, const struct device *dev, - const char *fmt, ...) - ; + const char *fmt, ...); extern __printf(2, 3) int dev_emerg(const struct device *dev, const char *fmt, ...); extern __printf(2, 3) @@ -914,6 +921,14 @@ int _dev_info(const struct device *dev, const char *fmt, ...); #else +static inline __printf(3, 0) +int dev_vprintk_emit(int level, const struct device *dev, + const char *fmt, va_list args) +{ return 0; } +static inline __printf(3, 4) +int dev_printk_emit(int level, const struct device *dev, const char *fmt, ...) +{ return 0; } + static inline int __dev_printk(const char *level, const struct device *dev, struct va_format *vaf) { return 0; } @@ -946,6 +961,32 @@ int _dev_info(const struct device *dev, const char *fmt, ...) #endif +/* + * Stupid hackaround for existing uses of non-printk uses dev_info + * + * Note that the definition of dev_info below is actually _dev_info + * and a macro is used to avoid redefining dev_info + */ + +#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg) + +#if defined(CONFIG_DYNAMIC_DEBUG) +#define dev_dbg(dev, format, ...) \ +do { \ + dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \ +} while (0) +#elif defined(DEBUG) +#define dev_dbg(dev, format, arg...) \ + dev_printk(KERN_DEBUG, dev, format, ##arg) +#else +#define dev_dbg(dev, format, arg...) \ +({ \ + if (0) \ + dev_printk(KERN_DEBUG, dev, format, ##arg); \ + 0; \ +}) +#endif + #define dev_level_ratelimited(dev_level, dev, fmt, ...) \ do { \ static DEFINE_RATELIMIT_STATE(_rs, \ @@ -969,33 +1010,21 @@ do { \ dev_level_ratelimited(dev_notice, dev, fmt, ##__VA_ARGS__) #define dev_info_ratelimited(dev, fmt, ...) \ dev_level_ratelimited(dev_info, dev, fmt, ##__VA_ARGS__) +#if defined(CONFIG_DYNAMIC_DEBUG) || defined(DEBUG) #define dev_dbg_ratelimited(dev, fmt, ...) \ - dev_level_ratelimited(dev_dbg, dev, fmt, ##__VA_ARGS__) - -/* - * Stupid hackaround for existing uses of non-printk uses dev_info - * - * Note that the definition of dev_info below is actually _dev_info - * and a macro is used to avoid redefining dev_info - */ - -#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg) - -#if defined(CONFIG_DYNAMIC_DEBUG) -#define dev_dbg(dev, format, ...) \ -do { \ - dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \ +do { \ + static DEFINE_RATELIMIT_STATE(_rs, \ + DEFAULT_RATELIMIT_INTERVAL, \ + DEFAULT_RATELIMIT_BURST); \ + DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \ + if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT) && \ + __ratelimit(&_rs)) \ + __dynamic_pr_debug(&descriptor, pr_fmt(fmt), \ + ##__VA_ARGS__); \ } while (0) -#elif defined(DEBUG) -#define dev_dbg(dev, format, arg...) \ - dev_printk(KERN_DEBUG, dev, format, ##arg) #else -#define dev_dbg(dev, format, arg...) \ -({ \ - if (0) \ - dev_printk(KERN_DEBUG, dev, format, ##arg); \ - 0; \ -}) +#define dev_dbg_ratelimited(dev, fmt, ...) \ + no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) #endif #ifdef VERBOSE_DEBUG diff --git a/include/linux/efi-bgrt.h b/include/linux/efi-bgrt.h new file mode 100644 index 000000000000..051b21fedf68 --- /dev/null +++ b/include/linux/efi-bgrt.h @@ -0,0 +1,21 @@ +#ifndef _LINUX_EFI_BGRT_H +#define _LINUX_EFI_BGRT_H + +#ifdef CONFIG_ACPI_BGRT + +#include <linux/acpi.h> + +void efi_bgrt_init(void); + +/* The BGRT data itself; only valid if bgrt_image != NULL. */ +extern void *bgrt_image; +extern size_t bgrt_image_size; +extern struct acpi_table_bgrt *bgrt_tab; + +#else /* !CONFIG_ACPI_BGRT */ + +static inline void efi_bgrt_init(void) {} + +#endif /* !CONFIG_ACPI_BGRT */ + +#endif /* _LINUX_EFI_BGRT_H */ diff --git a/include/linux/efi.h b/include/linux/efi.h index ec45ccd8708a..8670eb1eb8cd 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -496,6 +496,14 @@ extern void efi_map_pal_code (void); extern void efi_memmap_walk (efi_freemem_callback_t callback, void *arg); extern void efi_gettimeofday (struct timespec *ts); extern void efi_enter_virtual_mode (void); /* switch EFI to virtual mode, if possible */ +#ifdef CONFIG_X86 +extern void efi_late_init(void); +extern void efi_free_boot_services(void); +#else +static inline void efi_late_init(void) {} +static inline void efi_free_boot_services(void) {} +#endif +extern void __iomem *efi_lookup_mapped_addr(u64 phys_addr); extern u64 efi_get_iobase (void); extern u32 efi_mem_type (unsigned long phys_addr); extern u64 efi_mem_attributes (unsigned long phys_addr); diff --git a/include/linux/elf.h b/include/linux/elf.h index 999b4f52e8e5..0a05051a8924 100644 --- a/include/linux/elf.h +++ b/include/linux/elf.h @@ -387,7 +387,11 @@ typedef struct elf64_shdr { #define NT_S390_PREFIX 0x305 /* s390 prefix register */ #define NT_S390_LAST_BREAK 0x306 /* s390 breaking event address */ #define NT_S390_SYSTEM_CALL 0x307 /* s390 system call restart data */ +#define NT_S390_TDB 0x308 /* s390 transaction diagnostic block */ #define NT_ARM_VFP 0x400 /* ARM VFP/NEON registers */ +#define NT_ARM_TLS 0x401 /* ARM TLS register */ +#define NT_ARM_HW_BREAK 0x402 /* ARM hardware breakpoint registers */ +#define NT_ARM_HW_WATCH 0x403 /* ARM hardware watchpoint registers */ /* Note header in a PT_NOTE section */ diff --git a/include/linux/extcon.h b/include/linux/extcon.h index cdd401477656..7443a560c9d0 100644 --- a/include/linux/extcon.h +++ b/include/linux/extcon.h @@ -30,19 +30,19 @@ /* * The standard cable name is to help support general notifier - * and notifee device drivers to share the common names. + * and notifiee device drivers to share the common names. * Please use standard cable names unless your notifier device has * a very unique and abnormal cable or * the cable type is supposed to be used with only one unique - * pair of notifier/notifee devices. + * pair of notifier/notifiee devices. * * Please add any other "standard" cables used with extcon dev. * * You may add a dot and number to specify version or specification * of the specific cable if it is required. (e.g., "Fast-charger.18" * and "Fast-charger.10" for 1.8A and 1.0A chargers) - * However, the notifee and notifier should be able to handle such - * string and if the notifee can negotiate the protocol or idenify, + * However, the notifiee and notifier should be able to handle such + * string and if the notifiee can negotiate the protocol or identify, * you don't need such convention. This convention is helpful when * notifier can distinguish but notifiee cannot. */ @@ -76,7 +76,7 @@ struct extcon_cable; * struct extcon_dev - An extcon device represents one external connector. * @name The name of this extcon device. Parent device name is used * if NULL. - * @supported_cable Array of supported cable name ending with NULL. + * @supported_cable Array of supported cable names ending with NULL. * If supported_cable is NULL, cable name related APIs * are disabled. * @mutually_exclusive Array of mutually exclusive set of cables that cannot @@ -95,7 +95,7 @@ struct extcon_cable; * @state Attach/detach state of this extcon. Do not provide at * register-time * @nh Notifier for the state change events from this extcon - * @entry To support list of extcon devices so that uses can search + * @entry To support list of extcon devices so that users can search * for extcon devices based on the extcon name. * @lock * @max_supported Internal value to store the number of cables. @@ -199,7 +199,7 @@ extern int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state); /* * get/set_cable_state access each bit of the 32b encoded state value. * They are used to access the status of each cable based on the cable_name - * or cable_index, which is retrived by extcon_find_cable_index + * or cable_index, which is retrieved by extcon_find_cable_index */ extern int extcon_find_cable_index(struct extcon_dev *sdev, const char *cable_name); @@ -226,9 +226,9 @@ extern int extcon_unregister_interest(struct extcon_specific_cable_nb *nb); /* * Following APIs are to monitor every action of a notifier. - * Registerer gets notified for every external port of a connection device. + * Registrar gets notified for every external port of a connection device. * Probably this could be used to debug an action of notifier; however, - * we do not recommend to use this at normal 'notifiee' device drivers who + * we do not recommend to use this for normal 'notifiee' device drivers who * want to be notified by a specific external port of the notifier. */ extern int extcon_register_notifier(struct extcon_dev *edev, diff --git a/include/linux/extcon/extcon-adc-jack.h b/include/linux/extcon/extcon-adc-jack.h new file mode 100644 index 000000000000..20e9eef25d4c --- /dev/null +++ b/include/linux/extcon/extcon-adc-jack.h @@ -0,0 +1,71 @@ +/* + * include/linux/extcon/extcon-adc-jack.h + * + * Analog Jack extcon driver with ADC-based detection capability. + * + * Copyright (C) 2012 Samsung Electronics + * MyungJoo Ham <myungjoo.ham@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _EXTCON_ADC_JACK_H_ +#define _EXTCON_ADC_JACK_H_ __FILE__ + +#include <linux/module.h> +#include <linux/extcon.h> + +/** + * struct adc_jack_cond - condition to use an extcon state + * @state - the corresponding extcon state (if 0, this struct denotes + * the last adc_jack_cond element among the array) + * @min_adc - min adc value for this condition + * @max_adc - max adc value for this condition + * + * For example, if { .state = 0x3, .min_adc = 100, .max_adc = 200}, it means + * that if ADC value is between (inclusive) 100 and 200, than the cable 0 and + * 1 are attached (1<<0 | 1<<1 == 0x3) + * + * Note that you don't need to describe condition for "no cable attached" + * because when no adc_jack_cond is met, state = 0 is automatically chosen. + */ +struct adc_jack_cond { + u32 state; /* extcon state value. 0 if invalid */ + u32 min_adc; + u32 max_adc; +}; + +/** + * struct adc_jack_pdata - platform data for adc jack device. + * @name - name of the extcon device. If null, "adc-jack" is used. + * @consumer_channel - Unique name to identify the channel on the consumer + * side. This typically describes the channels used within + * the consumer. E.g. 'battery_voltage' + * @cable_names - array of cable names ending with null. + * @adc_contitions - array of struct adc_jack_cond conditions ending + * with .state = 0 entry. This describes how to decode + * adc values into extcon state. + * @irq_flags - irq flags used for the @irq + * @handling_delay_ms - in some devices, we need to read ADC value some + * milli-seconds after the interrupt occurs. You may + * describe such delays with @handling_delay_ms, which + * is rounded-off by jiffies. + */ +struct adc_jack_pdata { + const char *name; + const char *consumer_channel; + /* + * The last entry should be NULL + */ + const char **cable_names; + /* The last entry's state should be 0 */ + struct adc_jack_cond *adc_conditions; + + unsigned long irq_flags; + unsigned long handling_delay_ms; /* in ms */ +}; + +#endif /* _EXTCON_ADC_JACK_H */ diff --git a/include/linux/firmware.h b/include/linux/firmware.h index 1e7c01189fa6..e4279fedb93a 100644 --- a/include/linux/firmware.h +++ b/include/linux/firmware.h @@ -12,6 +12,9 @@ struct firmware { size_t size; const u8 *data; struct page **pages; + + /* firmware loader private fields */ + void *priv; }; struct module; @@ -44,6 +47,8 @@ int request_firmware_nowait( void (*cont)(const struct firmware *fw, void *context)); void release_firmware(const struct firmware *fw); +int cache_firmware(const char *name); +int uncache_firmware(const char *name); #else static inline int request_firmware(const struct firmware **fw, const char *name, @@ -62,6 +67,16 @@ static inline int request_firmware_nowait( static inline void release_firmware(const struct firmware *fw) { } + +static inline int cache_firmware(const char *name) +{ + return -ENOENT; +} + +static inline int uncache_firmware(const char *name) +{ + return -EINVAL; +} #endif #endif diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index 15be561e7397..a82296af413f 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -19,9 +19,11 @@ #define FSL_UTMI_PHY_DLY 10 /*As per P1010RM, delay for UTMI PHY CLK to become stable - 10ms*/ +#define FSL_USB_PHY_CLK_TIMEOUT 10000 /* uSec */ #define FSL_USB_VER_OLD 0 #define FSL_USB_VER_1_6 1 #define FSL_USB_VER_2_2 2 +#define FSL_USB_VER_2_4 3 #include <linux/types.h> diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 55e6d63d46d0..a52f2f4fe030 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -10,6 +10,7 @@ #include <linux/kallsyms.h> #include <linux/linkage.h> #include <linux/bitops.h> +#include <linux/ptrace.h> #include <linux/ktime.h> #include <linux/sched.h> #include <linux/types.h> @@ -18,6 +19,28 @@ #include <asm/ftrace.h> +/* + * If the arch supports passing the variable contents of + * function_trace_op as the third parameter back from the + * mcount call, then the arch should define this as 1. + */ +#ifndef ARCH_SUPPORTS_FTRACE_OPS +#define ARCH_SUPPORTS_FTRACE_OPS 0 +#endif + +/* + * If the arch's mcount caller does not support all of ftrace's + * features, then it must call an indirect function that + * does. Or at least does enough to prevent any unwelcomed side effects. + */ +#if !defined(CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST) || \ + !ARCH_SUPPORTS_FTRACE_OPS +# define FTRACE_FORCE_LIST_FUNC 1 +#else +# define FTRACE_FORCE_LIST_FUNC 0 +#endif + + struct module; struct ftrace_hash; @@ -29,7 +52,10 @@ ftrace_enable_sysctl(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos); -typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip); +struct ftrace_ops; + +typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip, + struct ftrace_ops *op, struct pt_regs *regs); /* * FTRACE_OPS_FL_* bits denote the state of ftrace_ops struct and are @@ -45,12 +71,33 @@ typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip); * could be controled by following calls: * ftrace_function_local_enable * ftrace_function_local_disable + * SAVE_REGS - The ftrace_ops wants regs saved at each function called + * and passed to the callback. If this flag is set, but the + * architecture does not support passing regs + * (ARCH_SUPPORTS_FTRACE_SAVE_REGS is not defined), then the + * ftrace_ops will fail to register, unless the next flag + * is set. + * SAVE_REGS_IF_SUPPORTED - This is the same as SAVE_REGS, but if the + * handler can handle an arch that does not save regs + * (the handler tests if regs == NULL), then it can set + * this flag instead. It will not fail registering the ftrace_ops + * but, the regs field will be NULL if the arch does not support + * passing regs to the handler. + * Note, if this flag is set, the SAVE_REGS flag will automatically + * get set upon registering the ftrace_ops, if the arch supports it. + * RECURSION_SAFE - The ftrace_ops can set this to tell the ftrace infrastructure + * that the call back has its own recursion protection. If it does + * not set this, then the ftrace infrastructure will add recursion + * protection for the caller. */ enum { - FTRACE_OPS_FL_ENABLED = 1 << 0, - FTRACE_OPS_FL_GLOBAL = 1 << 1, - FTRACE_OPS_FL_DYNAMIC = 1 << 2, - FTRACE_OPS_FL_CONTROL = 1 << 3, + FTRACE_OPS_FL_ENABLED = 1 << 0, + FTRACE_OPS_FL_GLOBAL = 1 << 1, + FTRACE_OPS_FL_DYNAMIC = 1 << 2, + FTRACE_OPS_FL_CONTROL = 1 << 3, + FTRACE_OPS_FL_SAVE_REGS = 1 << 4, + FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED = 1 << 5, + FTRACE_OPS_FL_RECURSION_SAFE = 1 << 6, }; struct ftrace_ops { @@ -163,7 +210,8 @@ static inline int ftrace_function_local_disabled(struct ftrace_ops *ops) return *this_cpu_ptr(ops->disabled); } -extern void ftrace_stub(unsigned long a0, unsigned long a1); +extern void ftrace_stub(unsigned long a0, unsigned long a1, + struct ftrace_ops *op, struct pt_regs *regs); #else /* !CONFIG_FUNCTION_TRACER */ /* @@ -172,6 +220,10 @@ extern void ftrace_stub(unsigned long a0, unsigned long a1); */ #define register_ftrace_function(ops) ({ 0; }) #define unregister_ftrace_function(ops) ({ 0; }) +static inline int ftrace_nr_registered_ops(void) +{ + return 0; +} static inline void clear_ftrace_function(void) { } static inline void ftrace_kill(void) { } static inline void ftrace_stop(void) { } @@ -227,12 +279,33 @@ extern void unregister_ftrace_function_probe_all(char *glob); extern int ftrace_text_reserved(void *start, void *end); +extern int ftrace_nr_registered_ops(void); + +/* + * The dyn_ftrace record's flags field is split into two parts. + * the first part which is '0-FTRACE_REF_MAX' is a counter of + * the number of callbacks that have registered the function that + * the dyn_ftrace descriptor represents. + * + * The second part is a mask: + * ENABLED - the function is being traced + * REGS - the record wants the function to save regs + * REGS_EN - the function is set up to save regs. + * + * When a new ftrace_ops is registered and wants a function to save + * pt_regs, the rec->flag REGS is set. When the function has been + * set up to save regs, the REG_EN flag is set. Once a function + * starts saving regs it will do so until all ftrace_ops are removed + * from tracing that function. + */ enum { - FTRACE_FL_ENABLED = (1 << 30), + FTRACE_FL_ENABLED = (1UL << 29), + FTRACE_FL_REGS = (1UL << 30), + FTRACE_FL_REGS_EN = (1UL << 31) }; -#define FTRACE_FL_MASK (0x3UL << 30) -#define FTRACE_REF_MAX ((1 << 30) - 1) +#define FTRACE_FL_MASK (0x7UL << 29) +#define FTRACE_REF_MAX ((1UL << 29) - 1) struct dyn_ftrace { union { @@ -244,6 +317,8 @@ struct dyn_ftrace { }; int ftrace_force_update(void); +int ftrace_set_filter_ip(struct ftrace_ops *ops, unsigned long ip, + int remove, int reset); int ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf, int len, int reset); int ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf, @@ -263,9 +338,23 @@ enum { FTRACE_STOP_FUNC_RET = (1 << 4), }; +/* + * The FTRACE_UPDATE_* enum is used to pass information back + * from the ftrace_update_record() and ftrace_test_record() + * functions. These are called by the code update routines + * to find out what is to be done for a given function. + * + * IGNORE - The function is already what we want it to be + * MAKE_CALL - Start tracing the function + * MODIFY_CALL - Stop saving regs for the function + * MODIFY_CALL_REGS - Start saving regs for the function + * MAKE_NOP - Stop tracing the function + */ enum { FTRACE_UPDATE_IGNORE, FTRACE_UPDATE_MAKE_CALL, + FTRACE_UPDATE_MODIFY_CALL, + FTRACE_UPDATE_MODIFY_CALL_REGS, FTRACE_UPDATE_MAKE_NOP, }; @@ -317,7 +406,9 @@ extern int ftrace_dyn_arch_init(void *data); extern void ftrace_replace_code(int enable); extern int ftrace_update_ftrace_func(ftrace_func_t func); extern void ftrace_caller(void); +extern void ftrace_regs_caller(void); extern void ftrace_call(void); +extern void ftrace_regs_call(void); extern void mcount_call(void); void ftrace_modify_all_code(int command); @@ -325,6 +416,15 @@ void ftrace_modify_all_code(int command); #ifndef FTRACE_ADDR #define FTRACE_ADDR ((unsigned long)ftrace_caller) #endif + +#ifndef FTRACE_REGS_ADDR +#ifdef ARCH_SUPPORTS_FTRACE_SAVE_REGS +# define FTRACE_REGS_ADDR ((unsigned long)ftrace_regs_caller) +#else +# define FTRACE_REGS_ADDR FTRACE_ADDR +#endif +#endif + #ifdef CONFIG_FUNCTION_GRAPH_TRACER extern void ftrace_graph_caller(void); extern int ftrace_enable_ftrace_graph_caller(void); @@ -380,6 +480,39 @@ extern int ftrace_make_nop(struct module *mod, */ extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr); +#ifdef ARCH_SUPPORTS_FTRACE_SAVE_REGS +/** + * ftrace_modify_call - convert from one addr to another (no nop) + * @rec: the mcount call site record + * @old_addr: the address expected to be currently called to + * @addr: the address to change to + * + * This is a very sensitive operation and great care needs + * to be taken by the arch. The operation should carefully + * read the location, check to see if what is read is indeed + * what we expect it to be, and then on success of the compare, + * it should write to the location. + * + * The code segment at @rec->ip should be a caller to @old_addr + * + * Return must be: + * 0 on success + * -EFAULT on error reading the location + * -EINVAL on a failed compare of the contents + * -EPERM on error writing to the location + * Any other value will be considered a failure. + */ +extern int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr, + unsigned long addr); +#else +/* Should never be called */ +static inline int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr, + unsigned long addr) +{ + return -EINVAL; +} +#endif + /* May be defined in arch */ extern int ftrace_arch_read_dyn_info(char *buf, int size); @@ -387,7 +520,7 @@ extern int skip_trace(unsigned long ip); extern void ftrace_disable_daemon(void); extern void ftrace_enable_daemon(void); -#else +#else /* CONFIG_DYNAMIC_FTRACE */ static inline int skip_trace(unsigned long ip) { return 0; } static inline int ftrace_force_update(void) { return 0; } static inline void ftrace_disable_daemon(void) { } @@ -405,6 +538,10 @@ static inline int ftrace_text_reserved(void *start, void *end) { return 0; } +static inline unsigned long ftrace_location(unsigned long ip) +{ + return 0; +} /* * Again users of functions that have ftrace_ops may not @@ -413,6 +550,7 @@ static inline int ftrace_text_reserved(void *start, void *end) */ #define ftrace_regex_open(ops, flag, inod, file) ({ -ENODEV; }) #define ftrace_set_early_filter(ops, buf, enable) do { } while (0) +#define ftrace_set_filter_ip(ops, ip, remove, reset) ({ -ENODEV; }) #define ftrace_set_filter(ops, buf, len, reset) ({ -ENODEV; }) #define ftrace_set_notrace(ops, buf, len, reset) ({ -ENODEV; }) #define ftrace_free_filter(ops) do { } while (0) diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index 305f23cd7cff..cab3da3d0949 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -132,11 +132,11 @@ extern void synchronize_irq(unsigned int irq); struct task_struct; #if !defined(CONFIG_VIRT_CPU_ACCOUNTING) && !defined(CONFIG_IRQ_TIME_ACCOUNTING) -static inline void account_system_vtime(struct task_struct *tsk) +static inline void vtime_account(struct task_struct *tsk) { } #else -extern void account_system_vtime(struct task_struct *tsk); +extern void vtime_account(struct task_struct *tsk); #endif #if defined(CONFIG_TINY_RCU) || defined(CONFIG_TINY_PREEMPT_RCU) @@ -162,7 +162,7 @@ extern void rcu_nmi_exit(void); */ #define __irq_enter() \ do { \ - account_system_vtime(current); \ + vtime_account(current); \ add_preempt_count(HARDIRQ_OFFSET); \ trace_hardirq_enter(); \ } while (0) @@ -178,7 +178,7 @@ extern void irq_enter(void); #define __irq_exit() \ do { \ trace_hardirq_exit(); \ - account_system_vtime(current); \ + vtime_account(current); \ sub_preempt_count(HARDIRQ_OFFSET); \ } while (0) diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h new file mode 100644 index 000000000000..0aa5f4c42ae6 --- /dev/null +++ b/include/linux/hid-sensor-hub.h @@ -0,0 +1,160 @@ +/* + * HID Sensors Driver + * Copyright (c) 2012, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ +#ifndef _HID_SENSORS_HUB_H +#define _HID_SENSORS_HUB_H + +#include <linux/hid.h> +#include <linux/hid-sensor-ids.h> + +/** + * struct hid_sensor_hub_attribute_info - Attribute info + * @usage_id: Parent usage id of a physical device. + * @attrib_id: Attribute id for this attribute. + * @report_id: Report id in which this information resides. + * @index: Field index in the report. + * @units: Measurment unit for this attribute. + * @unit_expo: Exponent used in the data. + * @size: Size in bytes for data size. + */ +struct hid_sensor_hub_attribute_info { + u32 usage_id; + u32 attrib_id; + s32 report_id; + s32 index; + s32 units; + s32 unit_expo; + s32 size; +}; + +/** + * struct hid_sensor_hub_device - Stores the hub instance data + * @hdev: Stores the hid instance. + * @vendor_id: Vendor id of hub device. + * @product_id: Product id of hub device. + */ +struct hid_sensor_hub_device { + struct hid_device *hdev; + u32 vendor_id; + u32 product_id; +}; + +/** + * struct hid_sensor_hub_callbacks - Client callback functions + * @pdev: Platform device instance of the client driver. + * @suspend: Suspend callback. + * @resume: Resume callback. + * @capture_sample: Callback to get a sample. + * @send_event: Send notification to indicate all samples are + * captured, process and send event + */ +struct hid_sensor_hub_callbacks { + struct platform_device *pdev; + int (*suspend)(struct hid_sensor_hub_device *hsdev, void *priv); + int (*resume)(struct hid_sensor_hub_device *hsdev, void *priv); + int (*capture_sample)(struct hid_sensor_hub_device *hsdev, + u32 usage_id, size_t raw_len, char *raw_data, + void *priv); + int (*send_event)(struct hid_sensor_hub_device *hsdev, u32 usage_id, + void *priv); +}; + +/* Registration functions */ + +/** +* sensor_hub_register_callback() - Register client callbacks +* @hsdev: Hub device instance. +* @usage_id: Usage id of the client (E.g. 0x200076 for Gyro). +* @usage_callback: Callback function storage +* +* Used to register callbacks by client processing drivers. Sensor +* hub core driver will call these callbacks to offload processing +* of data streams and notifications. +*/ +int sensor_hub_register_callback(struct hid_sensor_hub_device *hsdev, + u32 usage_id, + struct hid_sensor_hub_callbacks *usage_callback); + +/** +* sensor_hub_remove_callback() - Remove client callbacks +* @hsdev: Hub device instance. +* @usage_id: Usage id of the client (E.g. 0x200076 for Gyro). +* +* If there is a callback registred, this call will remove that +* callbacks, so that it will stop data and event notifications. +*/ +int sensor_hub_remove_callback(struct hid_sensor_hub_device *hsdev, + u32 usage_id); + + +/* Hid sensor hub core interfaces */ + +/** +* sensor_hub_input_get_attribute_info() - Get an attribute information +* @hsdev: Hub device instance. +* @type: Type of this attribute, input/output/feature +* @usage_id: Attribute usage id of parent physical device as per spec +* @attr_usage_id: Attribute usage id as per spec +* @info: return information about attribute after parsing report +* +* Parses report and returns the attribute information such as report id, +* field index, units and exponet etc. +*/ +int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev, + u8 type, + u32 usage_id, u32 attr_usage_id, + struct hid_sensor_hub_attribute_info *info); + +/** +* sensor_hub_input_attr_get_raw_value() - Synchronous read request +* @usage_id: Attribute usage id of parent physical device as per spec +* @attr_usage_id: Attribute usage id as per spec +* @report_id: Report id to look for +* +* Issues a synchronous read request for an input attribute. Returns +* data upto 32 bits. Since client can get events, so this call should +* not be used for data paths, this will impact performance. +*/ + +int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev, + u32 usage_id, + u32 attr_usage_id, u32 report_id); +/** +* sensor_hub_set_feature() - Feature set request +* @report_id: Report id to look for +* @field_index: Field index inside a report +* @value: Value to set +* +* Used to set a field in feature report. For example this can set polling +* interval, sensitivity, activate/deactivate state. +*/ +int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id, + u32 field_index, s32 value); + +/** +* sensor_hub_get_feature() - Feature get request +* @report_id: Report id to look for +* @field_index: Field index inside a report +* @value: Place holder for return value +* +* Used to get a field in feature report. For example this can get polling +* interval, sensitivity, activate/deactivate state. +*/ +int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id, + u32 field_index, s32 *value); +#endif diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h new file mode 100644 index 000000000000..ca8d7e94eb3c --- /dev/null +++ b/include/linux/hid-sensor-ids.h @@ -0,0 +1,112 @@ +/* + * HID Sensors Driver + * Copyright (c) 2012, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ +#ifndef _HID_SENSORS_IDS_H +#define _HID_SENSORS_IDS_H + +#define HID_UP_SENSOR 0x00200000 +#define HID_MAX_PHY_DEVICES 0xFF + +/* Accel 3D (200073) */ +#define HID_USAGE_SENSOR_ACCEL_3D 0x200073 +#define HID_USAGE_SENSOR_ACCEL_X_AXIS 0x200453 +#define HID_USAGE_SENSOR_ACCEL_Y_AXIS 0x200454 +#define HID_USAGE_SENSOR_ACCEL_Z_AXIS 0x200455 + +/* ALS (200041) */ +#define HID_USAGE_SENSOR_ALS 0x200041 +#define HID_USAGE_SENSOR_LIGHT_ILLUM 0x2004d1 + +/* Gyro 3D: (200076) */ +#define HID_USAGE_SENSOR_GYRO_3D 0x200076 +#define HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS 0x200457 +#define HID_USAGE_SENSOR_ANGL_VELOCITY_Y_AXIS 0x200458 +#define HID_USAGE_SENSOR_ANGL_VELOCITY_Z_AXIS 0x200459 + +/*ORIENTATION: Compass 3D: (200083) */ +#define HID_USAGE_SENSOR_COMPASS_3D 0x200083 +#define HID_USAGE_SENSOR_ORIENT_MAGN_HEADING 0x200471 +#define HID_USAGE_SENSOR_ORIENT_MAGN_HEADING_X 0x200472 +#define HID_USAGE_SENSOR_ORIENT_MAGN_HEADING_Y 0x200473 +#define HID_USAGE_SENSOR_ORIENT_MAGN_HEADING_Z 0x200474 + +#define HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH 0x200475 +#define HID_USAGE_SENSOR_ORIENT_COMP_TRUE_NORTH 0x200476 +#define HID_USAGE_SENSOR_ORIENT_MAGN_NORTH 0x200477 +#define HID_USAGE_SENSOR_ORIENT_TRUE_NORTH 0x200478 + +#define HID_USAGE_SENSOR_ORIENT_DISTANCE 0x200479 +#define HID_USAGE_SENSOR_ORIENT_DISTANCE_X 0x20047A +#define HID_USAGE_SENSOR_ORIENT_DISTANCE_Y 0x20047B +#define HID_USAGE_SENSOR_ORIENT_DISTANCE_Z 0x20047C +#define HID_USAGE_SENSOR_ORIENT_DISTANCE_OUT_OF_RANGE 0x20047D +#define HID_USAGE_SENSOR_ORIENT_TILT 0x20047E +#define HID_USAGE_SENSOR_ORIENT_TILT_X 0x20047F +#define HID_USAGE_SENSOR_ORIENT_TILT_Y 0x200480 +#define HID_USAGE_SENSOR_ORIENT_TILT_Z 0x200481 +#define HID_USAGE_SENSOR_ORIENT_ROTATION_MATRIX 0x200482 +#define HID_USAGE_SENSOR_ORIENT_QUATERNION 0x200483 +#define HID_USAGE_SENSOR_ORIENT_MAGN_FLUX 0x200484 + +#define HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS 0x200485 +#define HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS 0x200486 +#define HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS 0x200487 + +/* Units */ +#define HID_USAGE_SENSOR_UNITS_NOT_SPECIFIED 0x00 +#define HID_USAGE_SENSOR_UNITS_LUX 0x01 +#define HID_USAGE_SENSOR_UNITS_KELVIN 0x01000100 +#define HID_USAGE_SENSOR_UNITS_FAHRENHEIT 0x03000100 +#define HID_USAGE_SENSOR_UNITS_PASCAL 0xF1E1 +#define HID_USAGE_SENSOR_UNITS_NEWTON 0x11E1 +#define HID_USAGE_SENSOR_UNITS_METERS_PER_SECOND 0x11F0 +#define HID_USAGE_SENSOR_UNITS_METERS_PER_SEC_SQRD 0x11E0 +#define HID_USAGE_SENSOR_UNITS_FARAD 0xE14F2000 +#define HID_USAGE_SENSOR_UNITS_AMPERE 0x01001000 +#define HID_USAGE_SENSOR_UNITS_WATT 0x21d1 +#define HID_USAGE_SENSOR_UNITS_HENRY 0x21E1E000 +#define HID_USAGE_SENSOR_UNITS_OHM 0x21D1E000 +#define HID_USAGE_SENSOR_UNITS_VOLT 0x21D1F000 +#define HID_USAGE_SENSOR_UNITS_HERTZ 0x01F0 +#define HID_USAGE_SENSOR_UNITS_DEGREES_PER_SEC_SQRD 0x14E0 +#define HID_USAGE_SENSOR_UNITS_RADIANS 0x12 +#define HID_USAGE_SENSOR_UNITS_RADIANS_PER_SECOND 0x12F0 +#define HID_USAGE_SENSOR_UNITS_RADIANS_PER_SEC_SQRD 0x12E0 +#define HID_USAGE_SENSOR_UNITS_SECOND 0x0110 +#define HID_USAGE_SENSOR_UNITS_GAUSS 0x01E1F000 +#define HID_USAGE_SENSOR_UNITS_GRAM 0x0101 +#define HID_USAGE_SENSOR_UNITS_CENTIMETER 0x11 +#define HID_USAGE_SENSOR_UNITS_G 0x1A +#define HID_USAGE_SENSOR_UNITS_MILLISECOND 0x19 +#define HID_USAGE_SENSOR_UNITS_PERCENT 0x17 +#define HID_USAGE_SENSOR_UNITS_DEGREES 0x14 +#define HID_USAGE_SENSOR_UNITS_DEGREES_PER_SECOND 0x15 + +/* Common selectors */ +#define HID_USAGE_SENSOR_PROP_REPORT_INTERVAL 0x20030E +#define HID_USAGE_SENSOR_PROP_SENSITIVITY_ABS 0x20030F +#define HID_USAGE_SENSOR_PROP_SENSITIVITY_RANGE_PCT 0x200310 +#define HID_USAGE_SENSOR_PROP_SENSITIVITY_REL_PCT 0x200311 +#define HID_USAGE_SENSOR_PROP_ACCURACY 0x200312 +#define HID_USAGE_SENSOR_PROP_RESOLUTION 0x200313 +#define HID_USAGE_SENSOR_PROP_RANGE_MAXIMUM 0x200314 +#define HID_USAGE_SENSOR_PROP_RANGE_MINIMUM 0x200315 +#define HID_USAGE_SENSOR_PROP_REPORT_STATE 0x200316 +#define HID_USAGE_SENSOR_PROY_POWER_STATE 0x200319 + +#endif diff --git a/include/linux/hid.h b/include/linux/hid.h index 42970de1b40c..7e1f37db7582 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -414,7 +414,7 @@ struct hid_field { __u16 dpad; /* dpad input code */ }; -#define HID_MAX_FIELDS 128 +#define HID_MAX_FIELDS 256 struct hid_report { struct list_head list; @@ -626,6 +626,7 @@ struct hid_usage_id { * @report_fixup: called before report descriptor parsing (NULL means nop) * @input_mapping: invoked on input registering before mapping an usage * @input_mapped: invoked on input registering after mapping an usage + * @input_configured: invoked just before the device is registered * @feature_mapping: invoked on feature registering * @suspend: invoked on suspend (NULL means nop) * @resume: invoked on resume if device was not reset (NULL means nop) @@ -670,6 +671,8 @@ struct hid_driver { int (*input_mapped)(struct hid_device *hdev, struct hid_input *hidinput, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max); + void (*input_configured)(struct hid_device *hdev, + struct hid_input *hidinput); void (*feature_mapping)(struct hid_device *hdev, struct hid_field *field, struct hid_usage *usage); diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 68ed7f7e1fc9..e73b852156b1 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -122,12 +122,53 @@ #define REG_U32 4 #define REG_U64 8 +/* + * As we look at expanding the KVP functionality to include + * IP injection functionality, we need to maintain binary + * compatibility with older daemons. + * + * The KVP opcodes are defined by the host and it was unfortunate + * that I chose to treat the registration operation as part of the + * KVP operations defined by the host. + * Here is the level of compatibility + * (between the user level daemon and the kernel KVP driver) that we + * will implement: + * + * An older daemon will always be supported on a newer driver. + * A given user level daemon will require a minimal version of the + * kernel driver. + * If we cannot handle the version differences, we will fail gracefully + * (this can happen when we have a user level daemon that is more + * advanced than the KVP driver. + * + * We will use values used in this handshake for determining if we have + * workable user level daemon and the kernel driver. We begin by taking the + * registration opcode out of the KVP opcode namespace. We will however, + * maintain compatibility with the existing user-level daemon code. + */ + +/* + * Daemon code not supporting IP injection (legacy daemon). + */ + +#define KVP_OP_REGISTER 4 + +/* + * Daemon code supporting IP injection. + * The KVP opcode field is used to communicate the + * registration information; so define a namespace that + * will be distinct from the host defined KVP opcode. + */ + +#define KVP_OP_REGISTER1 100 + enum hv_kvp_exchg_op { KVP_OP_GET = 0, KVP_OP_SET, KVP_OP_DELETE, KVP_OP_ENUMERATE, - KVP_OP_REGISTER, + KVP_OP_GET_IP_INFO, + KVP_OP_SET_IP_INFO, KVP_OP_COUNT /* Number of operations, must be last. */ }; @@ -140,6 +181,39 @@ enum hv_kvp_exchg_pool { KVP_POOL_COUNT /* Number of pools, must be last. */ }; +/* + * Some Hyper-V status codes. + */ + +#define HV_S_OK 0x00000000 +#define HV_E_FAIL 0x80004005 +#define HV_S_CONT 0x80070103 +#define HV_ERROR_NOT_SUPPORTED 0x80070032 +#define HV_ERROR_MACHINE_LOCKED 0x800704F7 +#define HV_ERROR_DEVICE_NOT_CONNECTED 0x8007048F +#define HV_INVALIDARG 0x80070057 +#define HV_GUID_NOTFOUND 0x80041002 + +#define ADDR_FAMILY_NONE 0x00 +#define ADDR_FAMILY_IPV4 0x01 +#define ADDR_FAMILY_IPV6 0x02 + +#define MAX_ADAPTER_ID_SIZE 128 +#define MAX_IP_ADDR_SIZE 1024 +#define MAX_GATEWAY_SIZE 512 + + +struct hv_kvp_ipaddr_value { + __u16 adapter_id[MAX_ADAPTER_ID_SIZE]; + __u8 addr_family; + __u8 dhcp_enabled; + __u16 ip_addr[MAX_IP_ADDR_SIZE]; + __u16 sub_net[MAX_IP_ADDR_SIZE]; + __u16 gate_way[MAX_GATEWAY_SIZE]; + __u16 dns_addr[MAX_IP_ADDR_SIZE]; +} __attribute__((packed)); + + struct hv_kvp_hdr { __u8 operation; __u8 pool; @@ -181,16 +255,26 @@ struct hv_kvp_register { }; struct hv_kvp_msg { - struct hv_kvp_hdr kvp_hdr; + union { + struct hv_kvp_hdr kvp_hdr; + int error; + }; union { struct hv_kvp_msg_get kvp_get; struct hv_kvp_msg_set kvp_set; struct hv_kvp_msg_delete kvp_delete; struct hv_kvp_msg_enumerate kvp_enum_data; + struct hv_kvp_ipaddr_value kvp_ip_val; struct hv_kvp_register kvp_register; } body; } __attribute__((packed)); +struct hv_kvp_ip_msg { + __u8 operation; + __u8 pool; + struct hv_kvp_ipaddr_value kvp_ip_val; +} __attribute__((packed)); + #ifdef __KERNEL__ #include <linux/scatterlist.h> #include <linux/list.h> @@ -405,7 +489,7 @@ struct vmtransfer_page_range { struct vmtransfer_page_packet_header { struct vmpacket_descriptor d; u16 xfer_pageset_id; - bool sender_owns_set; + u8 sender_owns_set; u8 reserved; u32 range_cnt; struct vmtransfer_page_range ranges[1]; @@ -559,7 +643,7 @@ struct vmbus_channel_query_vmbus_version { /* VMBus Version Supported parameters */ struct vmbus_channel_version_supported { struct vmbus_channel_message_header header; - bool version_supported; + u8 version_supported; } __packed; /* Offer Channel parameters */ @@ -568,7 +652,7 @@ struct vmbus_channel_offer_channel { struct vmbus_channel_offer offer; u32 child_relid; u8 monitorid; - bool monitor_allocated; + u8 monitor_allocated; } __packed; /* Rescind Offer parameters */ @@ -704,7 +788,7 @@ struct vmbus_channel_initiate_contact { struct vmbus_channel_version_response { struct vmbus_channel_message_header header; - bool version_supported; + u8 version_supported; } __packed; enum vmbus_channel_state { @@ -977,11 +1061,6 @@ void vmbus_driver_unregister(struct hv_driver *hv_driver); #define ICMSGHDRFLAG_REQUEST 2 #define ICMSGHDRFLAG_RESPONSE 4 -#define HV_S_OK 0x00000000 -#define HV_E_FAIL 0x80004005 -#define HV_S_CONT 0x80070103 -#define HV_ERROR_NOT_SUPPORTED 0x80070032 -#define HV_ERROR_MACHINE_LOCKED 0x800704F7 /* * While we want to handle util services as regular devices, diff --git a/include/linux/iio/adc/ad_sigma_delta.h b/include/linux/iio/adc/ad_sigma_delta.h new file mode 100644 index 000000000000..2e4eab9868a3 --- /dev/null +++ b/include/linux/iio/adc/ad_sigma_delta.h @@ -0,0 +1,173 @@ +/* + * Support code for Analog Devices Sigma-Delta ADCs + * + * Copyright 2012 Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> + * + * Licensed under the GPL-2. + */ +#ifndef __AD_SIGMA_DELTA_H__ +#define __AD_SIGMA_DELTA_H__ + +enum ad_sigma_delta_mode { + AD_SD_MODE_CONTINUOUS = 0, + AD_SD_MODE_SINGLE = 1, + AD_SD_MODE_IDLE = 2, + AD_SD_MODE_POWERDOWN = 3, +}; + +/** + * struct ad_sigma_delta_calib_data - Calibration data for Sigma Delta devices + * @mode: Calibration mode. + * @channel: Calibration channel. + */ +struct ad_sd_calib_data { + unsigned int mode; + unsigned int channel; +}; + +struct ad_sigma_delta; +struct iio_dev; + +/** + * struct ad_sigma_delta_info - Sigma Delta driver specific callbacks and options + * @set_channel: Will be called to select the current channel, may be NULL. + * @set_mode: Will be called to select the current mode, may be NULL. + * @postprocess_sample: Is called for each sampled data word, can be used to + * modify or drop the sample data, it, may be NULL. + * @has_registers: true if the device has writable and readable registers, false + * if there is just one read-only sample data shift register. + * @addr_shift: Shift of the register address in the communications register. + * @read_mask: Mask for the communications register having the read bit set. + */ +struct ad_sigma_delta_info { + int (*set_channel)(struct ad_sigma_delta *, unsigned int channel); + int (*set_mode)(struct ad_sigma_delta *, enum ad_sigma_delta_mode mode); + int (*postprocess_sample)(struct ad_sigma_delta *, unsigned int raw_sample); + bool has_registers; + unsigned int addr_shift; + unsigned int read_mask; +}; + +/** + * struct ad_sigma_delta - Sigma Delta device struct + * @spi: The spi device associated with the Sigma Delta device. + * @trig: The IIO trigger associated with the Sigma Delta device. + * + * Most of the fields are private to the sigma delta library code and should not + * be accessed by individual drivers. + */ +struct ad_sigma_delta { + struct spi_device *spi; + struct iio_trigger *trig; + +/* private: */ + struct completion completion; + bool irq_dis; + + bool bus_locked; + + uint8_t comm; + + const struct ad_sigma_delta_info *info; + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + uint8_t data[4] ____cacheline_aligned; +}; + +static inline int ad_sigma_delta_set_channel(struct ad_sigma_delta *sd, + unsigned int channel) +{ + if (sd->info->set_channel) + return sd->info->set_channel(sd, channel); + + return 0; +} + +static inline int ad_sigma_delta_set_mode(struct ad_sigma_delta *sd, + unsigned int mode) +{ + if (sd->info->set_mode) + return sd->info->set_mode(sd, mode); + + return 0; +} + +static inline int ad_sigma_delta_postprocess_sample(struct ad_sigma_delta *sd, + unsigned int raw_sample) +{ + if (sd->info->postprocess_sample) + return sd->info->postprocess_sample(sd, raw_sample); + + return 0; +} + +void ad_sd_set_comm(struct ad_sigma_delta *sigma_delta, uint8_t comm); +int ad_sd_write_reg(struct ad_sigma_delta *sigma_delta, unsigned int reg, + unsigned int size, unsigned int val); +int ad_sd_read_reg(struct ad_sigma_delta *sigma_delta, unsigned int reg, + unsigned int size, unsigned int *val); + +int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, int *val); +int ad_sd_calibrate_all(struct ad_sigma_delta *sigma_delta, + const struct ad_sd_calib_data *cd, unsigned int n); +int ad_sd_init(struct ad_sigma_delta *sigma_delta, struct iio_dev *indio_dev, + struct spi_device *spi, const struct ad_sigma_delta_info *info); + +int ad_sd_setup_buffer_and_trigger(struct iio_dev *indio_dev); +void ad_sd_cleanup_buffer_and_trigger(struct iio_dev *indio_dev); + +int ad_sd_validate_trigger(struct iio_dev *indio_dev, struct iio_trigger *trig); + +#define __AD_SD_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ + _storagebits, _shift, _extend_name, _type) \ + { \ + .type = (_type), \ + .differential = (_channel2 == -1 ? 0 : 1), \ + .indexed = 1, \ + .channel = (_channel1), \ + .channel2 = (_channel2), \ + .address = (_address), \ + .extend_name = (_extend_name), \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT | \ + IIO_CHAN_INFO_OFFSET_SEPARATE_BIT, \ + .scan_index = (_si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = (_bits), \ + .storagebits = (_storagebits), \ + .shift = (_shift), \ + .endianness = IIO_BE, \ + }, \ + } + +#define AD_SD_DIFF_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ + _storagebits, _shift) \ + __AD_SD_CHANNEL(_si, _channel1, _channel2, _address, _bits, \ + _storagebits, _shift, NULL, IIO_VOLTAGE) + +#define AD_SD_SHORTED_CHANNEL(_si, _channel, _address, _bits, \ + _storagebits, _shift) \ + __AD_SD_CHANNEL(_si, _channel, _channel, _address, _bits, \ + _storagebits, _shift, "shorted", IIO_VOLTAGE) + +#define AD_SD_CHANNEL(_si, _channel, _address, _bits, \ + _storagebits, _shift) \ + __AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \ + _storagebits, _shift, NULL, IIO_VOLTAGE) + +#define AD_SD_TEMP_CHANNEL(_si, _address, _bits, _storagebits, _shift) \ + __AD_SD_CHANNEL(_si, 0, -1, _address, _bits, \ + _storagebits, _shift, NULL, IIO_TEMP) + +#define AD_SD_SUPPLY_CHANNEL(_si, _channel, _address, _bits, _storagebits, \ + _shift) \ + __AD_SD_CHANNEL(_si, _channel, -1, _address, _bits, \ + _storagebits, _shift, "supply", IIO_VOLTAGE) + +#endif diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h index 8ba516fc2ec6..c629b3a1d9a9 100644 --- a/include/linux/iio/buffer.h +++ b/include/linux/iio/buffer.h @@ -36,7 +36,7 @@ struct iio_buffer; * any of them not existing. **/ struct iio_buffer_access_funcs { - int (*store_to)(struct iio_buffer *buffer, u8 *data, s64 timestamp); + int (*store_to)(struct iio_buffer *buffer, u8 *data); int (*read_first_n)(struct iio_buffer *buffer, size_t n, char __user *buf); @@ -118,10 +118,8 @@ int iio_scan_mask_set(struct iio_dev *indio_dev, * iio_push_to_buffer() - push to a registered buffer. * @buffer: IIO buffer structure for device * @data: the data to push to the buffer - * @timestamp: timestamp to associate with the data */ -int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data, - s64 timestamp); +int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data); int iio_update_demux(struct iio_dev *indio_dev); diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h index e2657e6d4d26..e875bcf0478f 100644 --- a/include/linux/iio/consumer.h +++ b/include/linux/iio/consumer.h @@ -8,7 +8,7 @@ * the Free Software Foundation. */ #ifndef _IIO_INKERN_CONSUMER_H_ -#define _IIO_INKERN_CONSUMER_H +#define _IIO_INKERN_CONSUMER_H_ #include <linux/iio/types.h> struct iio_dev; @@ -61,7 +61,7 @@ void iio_channel_release_all(struct iio_channel *chan); /** * iio_read_channel_raw() - read from a given channel - * @channel: The channel being queried. + * @chan: The channel being queried. * @val: Value read back. * * Note raw reads from iio channels are in adc counts and hence @@ -71,6 +71,21 @@ int iio_read_channel_raw(struct iio_channel *chan, int *val); /** + * iio_read_channel_processed() - read processed value from a given channel + * @chan: The channel being queried. + * @val: Value read back. + * + * Returns an error code or 0. + * + * This function will read a processed value from a channel. A processed value + * means that this value will have the correct unit and not some device internal + * representation. If the device does not support reporting a processed value + * the function will query the raw value and the channels scale and offset and + * do the appropriate transformation. + */ +int iio_read_channel_processed(struct iio_channel *chan, int *val); + +/** * iio_get_channel_type() - get the type of a channel * @channel: The channel being queried. * @type: The type of the channel. @@ -82,7 +97,7 @@ int iio_get_channel_type(struct iio_channel *channel, /** * iio_read_channel_scale() - read the scale value for a channel - * @channel: The channel being queried. + * @chan: The channel being queried. * @val: First part of value read back. * @val2: Second part of value read back. * @@ -93,4 +108,27 @@ int iio_get_channel_type(struct iio_channel *channel, int iio_read_channel_scale(struct iio_channel *chan, int *val, int *val2); +/** + * iio_convert_raw_to_processed() - Converts a raw value to a processed value + * @chan: The channel being queried + * @raw: The raw IIO to convert + * @processed: The result of the conversion + * @scale: Scale factor to apply during the conversion + * + * Returns an error code or 0. + * + * This function converts a raw value to processed value for a specific channel. + * A raw value is the device internal representation of a sample and the value + * returned by iio_read_channel_raw, so the unit of that value is device + * depended. A processed value on the other hand is value has a normed unit + * according with the IIO specification. + * + * The scale factor allows to increase the precession of the returned value. For + * a scale factor of 1 the function will return the result in the normal IIO + * unit for the channel type. E.g. millivolt for voltage channels, if you want + * nanovolts instead pass 1000 as the scale factor. + */ +int iio_convert_raw_to_processed(struct iio_channel *chan, int raw, + int *processed, unsigned int scale); + #endif diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index be82936c4089..c0ae76ac4e0b 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -35,10 +35,13 @@ enum iio_chan_info_enum { IIO_CHAN_INFO_FREQUENCY, IIO_CHAN_INFO_PHASE, IIO_CHAN_INFO_HARDWAREGAIN, + IIO_CHAN_INFO_HYSTERESIS, }; #define IIO_CHAN_INFO_SHARED_BIT(type) BIT(type*2) #define IIO_CHAN_INFO_SEPARATE_BIT(type) BIT(type*2 + 1) +#define IIO_CHAN_INFO_BITS(type) (IIO_CHAN_INFO_SHARED_BIT(type) | \ + IIO_CHAN_INFO_SEPARATE_BIT(type)) #define IIO_CHAN_INFO_RAW_SEPARATE_BIT \ IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_RAW) @@ -100,6 +103,10 @@ enum iio_chan_info_enum { IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_HARDWAREGAIN) #define IIO_CHAN_INFO_HARDWAREGAIN_SHARED_BIT \ IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_HARDWAREGAIN) +#define IIO_CHAN_INFO_HYSTERESIS_SEPARATE_BIT \ + IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_HYSTERESIS) +#define IIO_CHAN_INFO_HYSTERESIS_SHARED_BIT \ + IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_HYSTERESIS) enum iio_endian { IIO_CPU, @@ -164,7 +171,7 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, * IIO_ENUM() - Initialize enum extended channel attribute * @_name: Attribute name * @_shared: Whether the attribute is shared between all channels - * @_e: Pointer to a iio_enum struct + * @_e: Pointer to an iio_enum struct * * This should usually be used together with IIO_ENUM_AVAILABLE() */ @@ -180,9 +187,9 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, /** * IIO_ENUM_AVAILABLE() - Initialize enum available extended channel attribute * @_name: Attribute name ("_available" will be appended to the name) - * @_e: Pointer to a iio_enum struct + * @_e: Pointer to an iio_enum struct * - * Creates a read only attribute which list all the available enum items in a + * Creates a read only attribute which lists all the available enum items in a * space separated list. This should usually be used together with IIO_ENUM() */ #define IIO_ENUM_AVAILABLE(_name, _e) \ @@ -229,6 +236,7 @@ ssize_t iio_enum_write(struct iio_dev *indio_dev, * @indexed: Specify the channel has a numerical index. If not, * the channel index number will be suppressed for sysfs * attributes but not for event codes. + * @output: Channel is output. * @differential: Channel is differential. */ struct iio_chan_spec { @@ -255,6 +263,21 @@ struct iio_chan_spec { unsigned differential:1; }; + +/** + * iio_channel_has_info() - Checks whether a channel supports a info attribute + * @chan: The channel to be queried + * @type: Type of the info attribute to be checked + * + * Returns true if the channels supports reporting values for the given info + * attribute type, false otherwise. + */ +static inline bool iio_channel_has_info(const struct iio_chan_spec *chan, + enum iio_chan_info_enum type) +{ + return chan->info_mask & IIO_CHAN_INFO_BITS(type); +} + #define IIO_ST(si, rb, sb, sh) \ { .sign = si, .realbits = rb, .storagebits = sb, .shift = sh } @@ -312,6 +335,9 @@ struct iio_dev; * Meaning is event dependent. * @validate_trigger: function to validate the trigger when the * current trigger gets changed. + * @update_scan_mode: function to configure device and scan buffer when + * channels have changed + * @debugfs_reg_access: function to read or write register value of device **/ struct iio_info { struct module *driver_module; @@ -367,10 +393,10 @@ struct iio_info { * scan mask is valid for the device. */ struct iio_buffer_setup_ops { - int (*preenable)(struct iio_dev *); - int (*postenable)(struct iio_dev *); - int (*predisable)(struct iio_dev *); - int (*postdisable)(struct iio_dev *); + int (*preenable)(struct iio_dev *); + int (*postenable)(struct iio_dev *); + int (*predisable)(struct iio_dev *); + int (*postdisable)(struct iio_dev *); bool (*validate_scan_mask)(struct iio_dev *indio_dev, const unsigned long *scan_mask); }; @@ -516,6 +542,31 @@ static inline struct iio_dev *iio_device_get(struct iio_dev *indio_dev) return indio_dev ? dev_to_iio_dev(get_device(&indio_dev->dev)) : NULL; } + +/** + * iio_device_set_drvdata() - Set device driver data + * @indio_dev: IIO device structure + * @data: Driver specific data + * + * Allows to attach an arbitrary pointer to an IIO device, which can later be + * retrieved by iio_device_get_drvdata(). + */ +static inline void iio_device_set_drvdata(struct iio_dev *indio_dev, void *data) +{ + dev_set_drvdata(&indio_dev->dev, data); +} + +/** + * iio_device_get_drvdata() - Get device driver data + * @indio_dev: IIO device structure + * + * Returns the data previously set with iio_device_set_drvdata() + */ +static inline void *iio_device_get_drvdata(struct iio_dev *indio_dev) +{ + return dev_get_drvdata(&indio_dev->dev); +} + /* Can we make this smaller? */ #define IIO_ALIGN L1_CACHE_BYTES /** diff --git a/include/linux/iio/kfifo_buf.h b/include/linux/iio/kfifo_buf.h index 014d5a13b32b..25eeac762e84 100644 --- a/include/linux/iio/kfifo_buf.h +++ b/include/linux/iio/kfifo_buf.h @@ -1,3 +1,5 @@ +#ifndef __LINUX_IIO_KFIFO_BUF_H__ +#define __LINUX_IIO_KFIFO_BUF_H__ #include <linux/kfifo.h> #include <linux/iio/iio.h> @@ -6,3 +8,4 @@ struct iio_buffer *iio_kfifo_allocate(struct iio_dev *indio_dev); void iio_kfifo_free(struct iio_buffer *r); +#endif diff --git a/include/linux/iio/machine.h b/include/linux/iio/machine.h index 400a453ff67b..809a3f08d5a5 100644 --- a/include/linux/iio/machine.h +++ b/include/linux/iio/machine.h @@ -8,6 +8,9 @@ * the Free Software Foundation. */ +#ifndef __LINUX_IIO_MACHINE_H__ +#define __LINUX_IIO_MACHINE_H__ + /** * struct iio_map - description of link between consumer and device channels * @adc_channel_label: Label used to identify the channel on the provider. @@ -22,3 +25,5 @@ struct iio_map { const char *consumer_dev_name; const char *consumer_channel; }; + +#endif diff --git a/include/linux/iio/trigger.h b/include/linux/iio/trigger.h index a9819940a84c..20239da1d0f7 100644 --- a/include/linux/iio/trigger.h +++ b/include/linux/iio/trigger.h @@ -29,7 +29,7 @@ struct iio_subirq { * instances of a given device. **/ struct iio_trigger_ops { - struct module *owner; + struct module *owner; int (*set_trigger_state)(struct iio_trigger *trig, bool state); int (*try_reenable)(struct iio_trigger *trig); int (*validate_device)(struct iio_trigger *trig, @@ -39,7 +39,7 @@ struct iio_trigger_ops { /** * struct iio_trigger - industrial I/O trigger device - * + * @ops: [DRIVER] operations structure * @id: [INTERN] unique id number * @name: [DRIVER] unique name * @dev: [DRIVER] associated device (if relevant) @@ -76,19 +76,19 @@ struct iio_trigger { static inline struct iio_trigger *to_iio_trigger(struct device *d) { return container_of(d, struct iio_trigger, dev); -}; +} static inline void iio_trigger_put(struct iio_trigger *trig) { module_put(trig->ops->owner); put_device(&trig->dev); -}; +} static inline void iio_trigger_get(struct iio_trigger *trig) { get_device(&trig->dev); __module_get(trig->ops->owner); -}; +} /** * iio_trigger_register() - register a trigger with the IIO core @@ -104,7 +104,8 @@ void iio_trigger_unregister(struct iio_trigger *trig_info); /** * iio_trigger_poll() - called on a trigger occurring - * @trig: trigger which occurred + * @trig: trigger which occurred + * @time: timestamp when trigger occurred * * Typically called in relevant hardware interrupt handler. **/ diff --git a/include/linux/iio/trigger_consumer.h b/include/linux/iio/trigger_consumer.h index 60d64b356945..c4f8c7409666 100644 --- a/include/linux/iio/trigger_consumer.h +++ b/include/linux/iio/trigger_consumer.h @@ -7,6 +7,15 @@ * the Free Software Foundation. */ +#ifndef __LINUX_IIO_TRIGGER_CONSUMER_H__ +#define __LINUX_IIO_TRIGGER_CONSUMER_H__ + +#include <linux/interrupt.h> +#include <linux/types.h> + +struct iio_dev; +struct iio_trigger; + /** * struct iio_poll_func - poll function pair * @@ -50,3 +59,5 @@ void iio_trigger_notify_done(struct iio_trigger *trig); */ int iio_triggered_buffer_postenable(struct iio_dev *indio_dev); int iio_triggered_buffer_predisable(struct iio_dev *indio_dev); + +#endif diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h index 44e397705d7f..5c647ecfd5ba 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h @@ -57,5 +57,6 @@ enum iio_modifier { #define IIO_VAL_INT_PLUS_MICRO 2 #define IIO_VAL_INT_PLUS_NANO 3 #define IIO_VAL_INT_PLUS_MICRO_DB 4 +#define IIO_VAL_FRACTIONAL 10 #endif /* _IIO_TYPES_H_ */ diff --git a/include/linux/input.h b/include/linux/input.h index 725dcd0f63a4..ba4874302939 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1169,6 +1169,18 @@ struct ff_effect { #include <linux/mod_devicetable.h> /** + * struct input_value - input value representation + * @type: type of value (EV_KEY, EV_ABS, etc) + * @code: the value code + * @value: the value + */ +struct input_value { + __u16 type; + __u16 code; + __s32 value; +}; + +/** * struct input_dev - represents an input device * @name: name of the device * @phys: physical path to the device in the system hierarchy @@ -1203,11 +1215,7 @@ struct ff_effect { * software autorepeat * @timer: timer for software autorepeat * @rep: current values for autorepeat parameters (delay, rate) - * @mt: pointer to array of struct input_mt_slot holding current values - * of tracked contacts - * @mtsize: number of MT slots the device uses - * @slot: MT slot currently being transmitted - * @trkid: stores MT tracking ID for the current contact + * @mt: pointer to multitouch state * @absinfo: array of &struct input_absinfo elements holding information * about absolute axes (current value, min, max, flat, fuzz, * resolution) @@ -1244,7 +1252,6 @@ struct ff_effect { * last user closes the device * @going_away: marks devices that are in a middle of unregistering and * causes input_open_device*() fail with -ENODEV. - * @sync: set to %true when there were no new events since last EV_SYN * @dev: driver model's view of this device * @h_list: list of input handles associated with the device. When * accessing the list dev->mutex must be held @@ -1287,10 +1294,7 @@ struct input_dev { int rep[REP_CNT]; - struct input_mt_slot *mt; - int mtsize; - int slot; - int trkid; + struct input_mt *mt; struct input_absinfo *absinfo; @@ -1312,12 +1316,14 @@ struct input_dev { unsigned int users; bool going_away; - bool sync; - struct device dev; struct list_head h_list; struct list_head node; + + unsigned int num_vals; + unsigned int max_vals; + struct input_value *vals; }; #define to_input_dev(d) container_of(d, struct input_dev, dev) @@ -1378,6 +1384,9 @@ struct input_handle; * @event: event handler. This method is being called by input core with * interrupts disabled and dev->event_lock spinlock held and so * it may not sleep + * @events: event sequence handler. This method is being called by + * input core with interrupts disabled and dev->event_lock + * spinlock held and so it may not sleep * @filter: similar to @event; separates normal event handlers from * "filters". * @match: called after comparing device's id with handler's id_table @@ -1414,6 +1423,8 @@ struct input_handler { void *private; void (*event)(struct input_handle *handle, unsigned int type, unsigned int code, int value); + void (*events)(struct input_handle *handle, + const struct input_value *vals, unsigned int count); bool (*filter)(struct input_handle *handle, unsigned int type, unsigned int code, int value); bool (*match)(struct input_handler *handler, struct input_dev *dev); int (*connect)(struct input_handler *handler, struct input_dev *dev, const struct input_device_id *id); diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h index f86737586e19..cc5cca774bab 100644 --- a/include/linux/input/mt.h +++ b/include/linux/input/mt.h @@ -15,12 +15,41 @@ #define TRKID_MAX 0xffff +#define INPUT_MT_POINTER 0x0001 /* pointer device, e.g. trackpad */ +#define INPUT_MT_DIRECT 0x0002 /* direct device, e.g. touchscreen */ +#define INPUT_MT_DROP_UNUSED 0x0004 /* drop contacts not seen in frame */ +#define INPUT_MT_TRACK 0x0008 /* use in-kernel tracking */ + /** * struct input_mt_slot - represents the state of an input MT slot * @abs: holds current values of ABS_MT axes for this slot + * @frame: last frame at which input_mt_report_slot_state() was called + * @key: optional driver designation of this slot */ struct input_mt_slot { int abs[ABS_MT_LAST - ABS_MT_FIRST + 1]; + unsigned int frame; + unsigned int key; +}; + +/** + * struct input_mt - state of tracked contacts + * @trkid: stores MT tracking ID for the next contact + * @num_slots: number of MT slots the device uses + * @slot: MT slot currently being transmitted + * @flags: input_mt operation flags + * @frame: increases every time input_mt_sync_frame() is called + * @red: reduced cost matrix for in-kernel tracking + * @slots: array of slots holding current values of tracked contacts + */ +struct input_mt { + int trkid; + int num_slots; + int slot; + unsigned int flags; + unsigned int frame; + int *red; + struct input_mt_slot slots[]; }; static inline void input_mt_set_value(struct input_mt_slot *slot, @@ -35,12 +64,18 @@ static inline int input_mt_get_value(const struct input_mt_slot *slot, return slot->abs[code - ABS_MT_FIRST]; } -int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots); +static inline bool input_mt_is_active(const struct input_mt_slot *slot) +{ + return input_mt_get_value(slot, ABS_MT_TRACKING_ID) >= 0; +} + +int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots, + unsigned int flags); void input_mt_destroy_slots(struct input_dev *dev); -static inline int input_mt_new_trkid(struct input_dev *dev) +static inline int input_mt_new_trkid(struct input_mt *mt) { - return dev->trkid++ & TRKID_MAX; + return mt->trkid++ & TRKID_MAX; } static inline void input_mt_slot(struct input_dev *dev, int slot) @@ -64,4 +99,20 @@ void input_mt_report_slot_state(struct input_dev *dev, void input_mt_report_finger_count(struct input_dev *dev, int count); void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count); +void input_mt_sync_frame(struct input_dev *dev); + +/** + * struct input_mt_pos - contact position + * @x: horizontal coordinate + * @y: vertical coordinate + */ +struct input_mt_pos { + s16 x, y; +}; + +int input_mt_assign_slots(struct input_dev *dev, int *slots, + const struct input_mt_pos *pos, int num_pos); + +int input_mt_get_slot_by_key(struct input_dev *dev, int key); + #endif diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index c5f856a040b9..5e4e6170f43a 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -430,6 +430,8 @@ enum NR_SOFTIRQS }; +#define SOFTIRQ_STOP_IDLE_MASK (~(1 << RCU_SOFTIRQ)) + /* map softirq index to softirq name. update 'softirq_to_name' in * kernel/softirq.c when adding a new softirq. */ diff --git a/include/linux/iommu.h b/include/linux/iommu.h index 7e83370e6fd2..f3b99e1c1042 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -256,72 +256,78 @@ static inline void iommu_set_fault_handler(struct iommu_domain *domain, { } -int iommu_attach_group(struct iommu_domain *domain, struct iommu_group *group) +static inline int iommu_attach_group(struct iommu_domain *domain, + struct iommu_group *group) { return -ENODEV; } -void iommu_detach_group(struct iommu_domain *domain, struct iommu_group *group) +static inline void iommu_detach_group(struct iommu_domain *domain, + struct iommu_group *group) { } -struct iommu_group *iommu_group_alloc(void) +static inline struct iommu_group *iommu_group_alloc(void) { return ERR_PTR(-ENODEV); } -void *iommu_group_get_iommudata(struct iommu_group *group) +static inline void *iommu_group_get_iommudata(struct iommu_group *group) { return NULL; } -void iommu_group_set_iommudata(struct iommu_group *group, void *iommu_data, - void (*release)(void *iommu_data)) +static inline void iommu_group_set_iommudata(struct iommu_group *group, + void *iommu_data, + void (*release)(void *iommu_data)) { } -int iommu_group_set_name(struct iommu_group *group, const char *name) +static inline int iommu_group_set_name(struct iommu_group *group, + const char *name) { return -ENODEV; } -int iommu_group_add_device(struct iommu_group *group, struct device *dev) +static inline int iommu_group_add_device(struct iommu_group *group, + struct device *dev) { return -ENODEV; } -void iommu_group_remove_device(struct device *dev) +static inline void iommu_group_remove_device(struct device *dev) { } -int iommu_group_for_each_dev(struct iommu_group *group, void *data, - int (*fn)(struct device *, void *)) +static inline int iommu_group_for_each_dev(struct iommu_group *group, + void *data, + int (*fn)(struct device *, void *)) { return -ENODEV; } -struct iommu_group *iommu_group_get(struct device *dev) +static inline struct iommu_group *iommu_group_get(struct device *dev) { return NULL; } -void iommu_group_put(struct iommu_group *group) +static inline void iommu_group_put(struct iommu_group *group) { } -int iommu_group_register_notifier(struct iommu_group *group, - struct notifier_block *nb) +static inline int iommu_group_register_notifier(struct iommu_group *group, + struct notifier_block *nb) { return -ENODEV; } -int iommu_group_unregister_notifier(struct iommu_group *group, - struct notifier_block *nb) +static inline int iommu_group_unregister_notifier(struct iommu_group *group, + struct notifier_block *nb) { return 0; } -int iommu_group_id(struct iommu_group *group) +static inline int iommu_group_id(struct iommu_group *group) { return -ENODEV; } diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h index 9a323d12de1c..0ba014c55056 100644 --- a/include/linux/irqdesc.h +++ b/include/linux/irqdesc.h @@ -10,12 +10,10 @@ struct irq_affinity_notify; struct proc_dir_entry; -struct timer_rand_state; struct module; /** * struct irq_desc - interrupt descriptor * @irq_data: per irq and chip data passed down to chip functions - * @timer_rand_state: pointer to timer rand state struct * @kstat_irqs: irq stats per cpu * @handle_irq: highlevel irq-events handler * @preflow_handler: handler called before the flow handler (currently used by sparc) diff --git a/include/linux/kdb.h b/include/linux/kdb.h index 42d9e863a313..7f6fe6e015bc 100644 --- a/include/linux/kdb.h +++ b/include/linux/kdb.h @@ -13,6 +13,14 @@ * Copyright (C) 2009 Jason Wessel <jason.wessel@windriver.com> */ +typedef enum { + KDB_REPEAT_NONE = 0, /* Do not repeat this command */ + KDB_REPEAT_NO_ARGS, /* Repeat the command without arguments */ + KDB_REPEAT_WITH_ARGS, /* Repeat the command including its arguments */ +} kdb_repeat_t; + +typedef int (*kdb_func_t)(int, const char **); + #ifdef CONFIG_KGDB_KDB #include <linux/init.h> #include <linux/sched.h> @@ -32,14 +40,6 @@ extern atomic_t kdb_event; #define KDB_MAXARGS 16 /* Maximum number of arguments to a function */ -typedef enum { - KDB_REPEAT_NONE = 0, /* Do not repeat this command */ - KDB_REPEAT_NO_ARGS, /* Repeat the command without arguments */ - KDB_REPEAT_WITH_ARGS, /* Repeat the command including its arguments */ -} kdb_repeat_t; - -typedef int (*kdb_func_t)(int, const char **); - /* KDB return codes from a command or internal kdb function */ #define KDB_NOTFOUND (-1) #define KDB_ARGCOUNT (-2) @@ -149,11 +149,14 @@ extern int kdb_register_repeat(char *, kdb_func_t, char *, char *, short, kdb_repeat_t); extern int kdb_unregister(char *); #else /* ! CONFIG_KGDB_KDB */ -#define kdb_printf(...) -#define kdb_init(x) -#define kdb_register(...) -#define kdb_register_repeat(...) -#define kdb_uregister(x) +static inline __printf(1, 2) int kdb_printf(const char *fmt, ...) { return 0; } +static inline void kdb_init(int level) {} +static inline int kdb_register(char *cmd, kdb_func_t func, char *usage, + char *help, short minlen) { return 0; } +static inline int kdb_register_repeat(char *cmd, kdb_func_t func, char *usage, + char *help, short minlen, + kdb_repeat_t repeat) { return 0; } +static inline int kdb_unregister(char *cmd) { return 0; } #endif /* CONFIG_KGDB_KDB */ enum { KDB_NOT_INITIALIZED, diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 594b419b7d20..2451f1f7a1d9 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -91,7 +91,7 @@ { \ typeof(x) __x = x; \ typeof(divisor) __d = divisor; \ - (((typeof(x))-1) >= 0 || (__x) >= 0) ? \ + (((typeof(x))-1) > 0 || (__x) > 0) ? \ (((__x) + ((__d) / 2)) / (__d)) : \ (((__x) - ((__d) / 2)) / (__d)); \ } \ diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h index 2fbd9053c2df..36d12f0884c3 100644 --- a/include/linux/kernel_stat.h +++ b/include/linux/kernel_stat.h @@ -130,4 +130,12 @@ extern void account_process_tick(struct task_struct *, int user); extern void account_steal_ticks(unsigned long ticks); extern void account_idle_ticks(unsigned long ticks); +#ifdef CONFIG_VIRT_CPU_ACCOUNTING +extern void vtime_task_switch(struct task_struct *prev); +extern void vtime_account_system(struct task_struct *tsk); +extern void vtime_account_idle(struct task_struct *tsk); +#else +static inline void vtime_task_switch(struct task_struct *prev) { } +#endif + #endif /* _LINUX_KERNEL_STAT_H */ diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h index c4d2fc194ede..4dff0c6ed58f 100644 --- a/include/linux/kgdb.h +++ b/include/linux/kgdb.h @@ -240,6 +240,7 @@ extern void kgdb_arch_late(void); * hardware breakpoints. * @correct_hw_break: Allow an architecture to specify how to correct the * hardware debug registers. + * @enable_nmi: Manage NMI-triggered entry to KGDB */ struct kgdb_arch { unsigned char gdb_bpt_instr[BREAK_INSTR_SIZE]; @@ -252,6 +253,8 @@ struct kgdb_arch { void (*disable_hw_break)(struct pt_regs *regs); void (*remove_all_hw_break)(void); void (*correct_hw_break)(void); + + void (*enable_nmi)(bool on); }; /** @@ -283,6 +286,16 @@ extern struct kgdb_arch arch_kgdb_ops; extern unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs); +#ifdef CONFIG_SERIAL_KGDB_NMI +extern int kgdb_register_nmi_console(void); +extern int kgdb_unregister_nmi_console(void); +extern bool kgdb_nmi_poll_knock(void); +#else +static inline int kgdb_register_nmi_console(void) { return 0; } +static inline int kgdb_unregister_nmi_console(void) { return 0; } +static inline bool kgdb_nmi_poll_knock(void) { return 1; } +#endif + extern int kgdb_register_io_module(struct kgdb_io *local_kgdb_io_ops); extern void kgdb_unregister_io_module(struct kgdb_io *local_kgdb_io_ops); extern struct kgdb_io *dbg_io_ops; diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h index b6e1f8c00577..23755ba42abc 100644 --- a/include/linux/kprobes.h +++ b/include/linux/kprobes.h @@ -38,6 +38,7 @@ #include <linux/spinlock.h> #include <linux/rcupdate.h> #include <linux/mutex.h> +#include <linux/ftrace.h> #ifdef CONFIG_KPROBES #include <asm/kprobes.h> @@ -48,14 +49,26 @@ #define KPROBE_REENTER 0x00000004 #define KPROBE_HIT_SSDONE 0x00000008 +/* + * If function tracer is enabled and the arch supports full + * passing of pt_regs to function tracing, then kprobes can + * optimize on top of function tracing. + */ +#if defined(CONFIG_FUNCTION_TRACER) && defined(ARCH_SUPPORTS_FTRACE_SAVE_REGS) \ + && defined(ARCH_SUPPORTS_KPROBES_ON_FTRACE) +# define KPROBES_CAN_USE_FTRACE +#endif + /* Attach to insert probes on any functions which should be ignored*/ #define __kprobes __attribute__((__section__(".kprobes.text"))) + #else /* CONFIG_KPROBES */ typedef int kprobe_opcode_t; struct arch_specific_insn { int dummy; }; #define __kprobes + #endif /* CONFIG_KPROBES */ struct kprobe; @@ -128,6 +141,7 @@ struct kprobe { * NOTE: * this flag is only for optimized_kprobe. */ +#define KPROBE_FLAG_FTRACE 8 /* probe is using ftrace */ /* Has this kprobe gone ? */ static inline int kprobe_gone(struct kprobe *p) @@ -146,6 +160,13 @@ static inline int kprobe_optimized(struct kprobe *p) { return p->flags & KPROBE_FLAG_OPTIMIZED; } + +/* Is this kprobe uses ftrace ? */ +static inline int kprobe_ftrace(struct kprobe *p) +{ + return p->flags & KPROBE_FLAG_FTRACE; +} + /* * Special probe type that uses setjmp-longjmp type tricks to resume * execution at a specified entry with a matching prototype corresponding @@ -295,6 +316,12 @@ extern int proc_kprobes_optimization_handler(struct ctl_table *table, #endif #endif /* CONFIG_OPTPROBES */ +#ifdef KPROBES_CAN_USE_FTRACE +extern void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip, + struct ftrace_ops *ops, struct pt_regs *regs); +extern int arch_prepare_kprobe_ftrace(struct kprobe *p); +#endif + /* Get the kprobe at this addr (if any) - called with preemption disabled */ struct kprobe *get_kprobe(void *addr); diff --git a/include/linux/kthread.h b/include/linux/kthread.h index 22ccf9dee177..8d816646f766 100644 --- a/include/linux/kthread.h +++ b/include/linux/kthread.h @@ -14,6 +14,11 @@ struct task_struct *kthread_create_on_node(int (*threadfn)(void *data), kthread_create_on_node(threadfn, data, -1, namefmt, ##arg) +struct task_struct *kthread_create_on_cpu(int (*threadfn)(void *data), + void *data, + unsigned int cpu, + const char *namefmt); + /** * kthread_run - create and wake a thread. * @threadfn: the function to run until signal_pending(current). @@ -34,9 +39,13 @@ struct task_struct *kthread_create_on_node(int (*threadfn)(void *data), void kthread_bind(struct task_struct *k, unsigned int cpu); int kthread_stop(struct task_struct *k); -int kthread_should_stop(void); +bool kthread_should_stop(void); +bool kthread_should_park(void); bool kthread_freezable_should_stop(bool *was_frozen); void *kthread_data(struct task_struct *k); +int kthread_park(struct task_struct *k); +void kthread_unpark(struct task_struct *k); +void kthread_parkme(void); int kthreadd(void *unused); extern struct task_struct *kthreadd_task; diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index b70b48b01098..8a59e0abe5fa 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -685,7 +685,7 @@ static inline int kvm_deassign_device(struct kvm *kvm, static inline void kvm_guest_enter(void) { BUG_ON(preemptible()); - account_system_vtime(current); + vtime_account(current); current->flags |= PF_VCPU; /* KVM does not hold any references to rcu protected data when it * switches CPU into a guest mode. In fact switching to a guest mode @@ -699,7 +699,7 @@ static inline void kvm_guest_enter(void) static inline void kvm_guest_exit(void) { - account_system_vtime(current); + vtime_account(current); current->flags &= ~PF_VCPU; } diff --git a/include/linux/memory.h b/include/linux/memory.h index 1ac7f6e405f9..ff9a9f8e0ed9 100644 --- a/include/linux/memory.h +++ b/include/linux/memory.h @@ -19,7 +19,7 @@ #include <linux/compiler.h> #include <linux/mutex.h> -#define MIN_MEMORY_BLOCK_SIZE (1 << SECTION_SIZE_BITS) +#define MIN_MEMORY_BLOCK_SIZE (1UL << SECTION_SIZE_BITS) struct memory_block { unsigned long start_section_nr; diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index 5b90e94399e1..c410d99bd667 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -136,6 +136,7 @@ enum prcmu_clock { PRCMU_TIMCLK, PRCMU_PLLSOC0, PRCMU_PLLSOC1, + PRCMU_ARMSS, PRCMU_PLLDDR, PRCMU_PLLDSI, PRCMU_DSI0CLK, diff --git a/include/linux/mfd/max77686.h b/include/linux/mfd/max77686.h index 3d7ae4d7fd36..46c0f320ed76 100644 --- a/include/linux/mfd/max77686.h +++ b/include/linux/mfd/max77686.h @@ -74,6 +74,7 @@ enum max77686_regulators { struct max77686_regulator_data { int id; struct regulator_init_data *initdata; + struct device_node *of_node; }; enum max77686_opmode { diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h index f4f0dfa4698a..6823548d0c0a 100644 --- a/include/linux/mfd/max8998.h +++ b/include/linux/mfd/max8998.h @@ -67,7 +67,7 @@ struct max8998_regulator_data { /** * struct max8998_board - packages regulator init data * @regulators: array of defined regulators - * @num_regulators: number of regultors used + * @num_regulators: number of regulators used * @irq_base: base IRQ number for max8998, required for IRQs * @ono: power onoff IRQ number for max8998 * @buck_voltage_lock: Do NOT change the values of the following six diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h index 61f0905bdc48..de201203bc7c 100644 --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -1,3 +1,15 @@ +/* + * include/linux/micrel_phy.h + * + * Micrel PHY IDs + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + #ifndef _MICREL_PHY_H #define _MICREL_PHY_H @@ -5,10 +17,11 @@ #define PHY_ID_KSZ9021 0x00221610 #define PHY_ID_KS8737 0x00221720 -#define PHY_ID_KS8041 0x00221510 -#define PHY_ID_KS8051 0x00221550 +#define PHY_ID_KSZ8021 0x00221555 +#define PHY_ID_KSZ8041 0x00221510 +#define PHY_ID_KSZ8051 0x00221550 /* both for ks8001 Rev. A/B, and for ks8721 Rev 3. */ -#define PHY_ID_KS8001 0x0022161A +#define PHY_ID_KSZ8001 0x0022161A /* struct phy_device dev_flags definitions */ #define MICREL_PHY_50MHZ_CLK 0x00000001 diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 6955045199b0..fed3def62818 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -232,7 +232,7 @@ struct of_device_id char type[32]; char compatible[128]; #ifdef __KERNEL__ - void *data; + const void *data; #else kernel_ulong_t data; #endif @@ -600,4 +600,12 @@ struct x86_cpu_id { #define X86_MODEL_ANY 0 #define X86_FEATURE_ANY 0 /* Same as FPU, you can't test for that */ +#define IPACK_ANY_FORMAT 0xff +#define IPACK_ANY_ID (~0) +struct ipack_device_id { + __u8 format; /* Format version or IPACK_ANY_ID */ + __u32 vendor; /* Vendor ID or IPACK_ANY_ID */ + __u32 device; /* Device ID or IPACK_ANY_ID */ +}; + #endif /* LINUX_MOD_DEVICETABLE_H */ diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 59dc05f38247..5f49cc0a107e 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2720,9 +2720,6 @@ static inline const char *netdev_name(const struct net_device *dev) return dev->name; } -extern int __netdev_printk(const char *level, const struct net_device *dev, - struct va_format *vaf); - extern __printf(3, 4) int netdev_printk(const char *level, const struct net_device *dev, const char *format, ...); diff --git a/include/linux/nvme.h b/include/linux/nvme.h index 9490a00529f4..c25cccaa555a 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -35,8 +35,10 @@ struct nvme_bar { __u64 acq; /* Admin CQ Base Address */ }; +#define NVME_CAP_MQES(cap) ((cap) & 0xffff) #define NVME_CAP_TIMEOUT(cap) (((cap) >> 24) & 0xff) #define NVME_CAP_STRIDE(cap) (((cap) >> 32) & 0xf) +#define NVME_CAP_MPSMIN(cap) (((cap) >> 48) & 0xf) enum { NVME_CC_ENABLE = 1 << 0, diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h index 248fba2af98a..9a22b5efb384 100644 --- a/include/linux/pci-acpi.h +++ b/include/linux/pci-acpi.h @@ -22,19 +22,24 @@ extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle); static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev) { struct pci_bus *pbus = pdev->bus; + /* Find a PCI root bus */ while (!pci_is_root_bus(pbus)) pbus = pbus->parent; - return acpi_get_pci_rootbridge_handle(pci_domain_nr(pbus), - pbus->number); + + return DEVICE_ACPI_HANDLE(pbus->bridge); } static inline acpi_handle acpi_pci_get_bridge_handle(struct pci_bus *pbus) { - if (!pci_is_root_bus(pbus)) - return DEVICE_ACPI_HANDLE(&(pbus->self->dev)); - return acpi_get_pci_rootbridge_handle(pci_domain_nr(pbus), - pbus->number); + struct device *dev; + + if (pci_is_root_bus(pbus)) + dev = pbus->bridge; + else + dev = &pbus->self->dev; + + return DEVICE_ACPI_HANDLE(dev); } #endif diff --git a/include/linux/pci.h b/include/linux/pci.h index 5faa8310eec9..be1de01de1c4 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -254,10 +254,10 @@ struct pci_dev { u8 revision; /* PCI revision, low byte of class word */ u8 hdr_type; /* PCI header type (`multi' flag masked out) */ u8 pcie_cap; /* PCI-E capability offset */ - u8 pcie_type:4; /* PCI-E device/port type */ u8 pcie_mpss:3; /* PCI-E Max Payload Size Supported */ u8 rom_base_reg; /* which config register controls the ROM */ u8 pin; /* which interrupt pin this device uses */ + u16 pcie_flags_reg; /* cached PCI-E Capabilities Register */ struct pci_driver *driver; /* which driver has allocated this device */ u64 dma_mask; /* Mask of the bits of bus address this @@ -369,7 +369,6 @@ static inline struct pci_dev *pci_physfn(struct pci_dev *dev) extern struct pci_dev *alloc_pci_dev(void); -#define pci_dev_b(n) list_entry(n, struct pci_dev, bus_list) #define to_pci_dev(n) container_of(n, struct pci_dev, dev) #define for_each_pci_dev(d) while ((d = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, d)) != NULL) @@ -596,7 +595,7 @@ struct pci_driver { int (*resume_early) (struct pci_dev *dev); int (*resume) (struct pci_dev *dev); /* Device woken up */ void (*shutdown) (struct pci_dev *dev); - struct pci_error_handlers *err_handler; + const struct pci_error_handlers *err_handler; struct device_driver driver; struct pci_dynids dynids; }; @@ -734,9 +733,7 @@ u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp); extern struct pci_dev *pci_dev_get(struct pci_dev *dev); extern void pci_dev_put(struct pci_dev *dev); extern void pci_remove_bus(struct pci_bus *b); -extern void __pci_remove_bus_device(struct pci_dev *dev); extern void pci_stop_and_remove_bus_device(struct pci_dev *dev); -extern void pci_stop_bus_device(struct pci_dev *dev); void pci_setup_cardbus(struct pci_bus *bus); extern void pci_sort_breadthfirst(void); #define dev_is_pci(d) ((d)->bus == &pci_bus_type) @@ -755,6 +752,7 @@ enum pci_lost_interrupt_reason pci_lost_interrupt(struct pci_dev *dev); int pci_find_capability(struct pci_dev *dev, int cap); int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap); int pci_find_ext_capability(struct pci_dev *dev, int cap); +int pci_find_next_ext_capability(struct pci_dev *dev, int pos, int cap); int pci_find_ht_capability(struct pci_dev *dev, int ht_cap); int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap); struct pci_bus *pci_find_next_bus(const struct pci_bus *from); @@ -816,6 +814,39 @@ static inline int pci_write_config_dword(const struct pci_dev *dev, int where, return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val); } +int pcie_capability_read_word(struct pci_dev *dev, int pos, u16 *val); +int pcie_capability_read_dword(struct pci_dev *dev, int pos, u32 *val); +int pcie_capability_write_word(struct pci_dev *dev, int pos, u16 val); +int pcie_capability_write_dword(struct pci_dev *dev, int pos, u32 val); +int pcie_capability_clear_and_set_word(struct pci_dev *dev, int pos, + u16 clear, u16 set); +int pcie_capability_clear_and_set_dword(struct pci_dev *dev, int pos, + u32 clear, u32 set); + +static inline int pcie_capability_set_word(struct pci_dev *dev, int pos, + u16 set) +{ + return pcie_capability_clear_and_set_word(dev, pos, 0, set); +} + +static inline int pcie_capability_set_dword(struct pci_dev *dev, int pos, + u32 set) +{ + return pcie_capability_clear_and_set_dword(dev, pos, 0, set); +} + +static inline int pcie_capability_clear_word(struct pci_dev *dev, int pos, + u16 clear) +{ + return pcie_capability_clear_and_set_word(dev, pos, clear, 0); +} + +static inline int pcie_capability_clear_dword(struct pci_dev *dev, int pos, + u32 clear) +{ + return pcie_capability_clear_and_set_dword(dev, pos, clear, 0); +} + /* user-space driven config access */ int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val); int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val); @@ -1013,7 +1044,6 @@ void pci_unregister_driver(struct pci_driver *dev); module_driver(__pci_driver, pci_register_driver, \ pci_unregister_driver) -void pci_stop_and_remove_behind_bridge(struct pci_dev *dev); struct pci_driver *pci_dev_driver(const struct pci_dev *dev); int pci_add_dynid(struct pci_driver *drv, unsigned int vendor, unsigned int device, @@ -1031,6 +1061,8 @@ int pci_cfg_space_size_ext(struct pci_dev *dev); int pci_cfg_space_size(struct pci_dev *dev); unsigned char pci_bus_max_busnr(struct pci_bus *bus); void pci_setup_bridge(struct pci_bus *bus); +resource_size_t pcibios_window_alignment(struct pci_bus *bus, + unsigned long type); #define PCI_VGA_STATE_CHANGE_BRIDGE (1 << 0) #define PCI_VGA_STATE_CHANGE_DECODES (1 << 1) @@ -1472,7 +1504,7 @@ enum pci_fixup_pass { /* Anonymous variables would be nice... */ #define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, class, \ class_shift, hook) \ - static const struct pci_fixup const __pci_fixup_##name __used \ + static const struct pci_fixup __pci_fixup_##name __used \ __attribute__((__section__(#section), aligned((sizeof(void *))))) \ = { vendor, device, class, class_shift, hook }; @@ -1650,6 +1682,15 @@ static inline bool pci_is_pcie(struct pci_dev *dev) return !!pci_pcie_cap(dev); } +/** + * pci_pcie_type - get the PCIe device/port type + * @dev: PCI device + */ +static inline int pci_pcie_type(const struct pci_dev *dev) +{ + return (dev->pcie_flags_reg & PCI_EXP_FLAGS_TYPE) >> 4; +} + void pci_request_acs(void); bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags); bool pci_acs_path_enabled(struct pci_dev *start, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 6b4565c440c8..8d3c42719387 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1847,7 +1847,6 @@ #define PCI_DEVICE_ID_SIIG_8S_20x_650 0x2081 #define PCI_DEVICE_ID_SIIG_8S_20x_850 0x2082 #define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL 0x2050 -#define PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL 0x2530 #define PCI_VENDOR_ID_RADISYS 0x1331 diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index 7fb75b143755..20ae747ddf34 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -549,6 +549,7 @@ #define PCI_EXP_LNKCAP2_SLS_8_0GB 0x04 /* Current Link Speed 8.0GT/s */ #define PCI_EXP_LNKCAP2_CROSSLINK 0x100 /* Crosslink supported */ #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ +#define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ #define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */ /* Extended Capabilities (PCI-X 2.0 and Express) */ @@ -677,6 +678,12 @@ #define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */ #define PCI_EXT_CAP_PWR_SIZEOF 16 +/* Vendor-Specific (VSEC, PCI_EXT_CAP_ID_VNDR) */ +#define PCI_VNDR_HEADER 4 /* Vendor-Specific Header */ +#define PCI_VNDR_HEADER_ID(x) ((x) & 0xffff) +#define PCI_VNDR_HEADER_REV(x) (((x) >> 16) & 0xf) +#define PCI_VNDR_HEADER_LEN(x) (((x) >> 20) & 0xfff) + /* * Hypertransport sub capability types * diff --git a/include/linux/pcieport_if.h b/include/linux/pcieport_if.h index 6775532b92a9..e6f91b1406d8 100644 --- a/include/linux/pcieport_if.h +++ b/include/linux/pcieport_if.h @@ -49,7 +49,7 @@ struct pcie_port_service_driver { int (*resume) (struct pcie_device *dev); /* Service Error Recovery Handler */ - struct pci_error_handlers *err_handler; + const struct pci_error_handlers *err_handler; /* Link Reset Capability - AER service driver specific */ pci_ers_result_t (*reset_link) (struct pci_dev *dev); diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 33ed9d605f91..599afc4bb67e 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -130,8 +130,10 @@ enum perf_event_sample_format { PERF_SAMPLE_STREAM_ID = 1U << 9, PERF_SAMPLE_RAW = 1U << 10, PERF_SAMPLE_BRANCH_STACK = 1U << 11, + PERF_SAMPLE_REGS_USER = 1U << 12, + PERF_SAMPLE_STACK_USER = 1U << 13, - PERF_SAMPLE_MAX = 1U << 12, /* non-ABI */ + PERF_SAMPLE_MAX = 1U << 14, /* non-ABI */ }; /* @@ -163,6 +165,15 @@ enum perf_branch_sample_type { PERF_SAMPLE_BRANCH_HV) /* + * Values to determine ABI of the registers dump. + */ +enum perf_sample_regs_abi { + PERF_SAMPLE_REGS_ABI_NONE = 0, + PERF_SAMPLE_REGS_ABI_32 = 1, + PERF_SAMPLE_REGS_ABI_64 = 2, +}; + +/* * The format of the data returned by read() on a perf event fd, * as specified by attr.read_format: * @@ -194,6 +205,8 @@ enum perf_event_read_format { #define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ #define PERF_ATTR_SIZE_VER1 72 /* add: config2 */ #define PERF_ATTR_SIZE_VER2 80 /* add: branch_sample_type */ +#define PERF_ATTR_SIZE_VER3 96 /* add: sample_regs_user */ + /* add: sample_stack_user */ /* * Hardware event_id to monitor via a performance monitoring event: @@ -255,7 +268,10 @@ struct perf_event_attr { exclude_host : 1, /* don't count in host */ exclude_guest : 1, /* don't count in guest */ - __reserved_1 : 43; + exclude_callchain_kernel : 1, /* exclude kernel callchains */ + exclude_callchain_user : 1, /* exclude user callchains */ + + __reserved_1 : 41; union { __u32 wakeup_events; /* wakeup every n events */ @@ -271,9 +287,25 @@ struct perf_event_attr { __u64 bp_len; __u64 config2; /* extension of config1 */ }; - __u64 branch_sample_type; /* enum branch_sample_type */ + __u64 branch_sample_type; /* enum perf_branch_sample_type */ + + /* + * Defines set of user regs to dump on samples. + * See asm/perf_regs.h for details. + */ + __u64 sample_regs_user; + + /* + * Defines size of the user stack to dump on samples. + */ + __u32 sample_stack_user; + + /* Align to u64. */ + __u32 __reserved_2; }; +#define perf_flags(attr) (*(&(attr)->read_format + 1)) + /* * Ioctls that can be done on a perf event fd: */ @@ -548,6 +580,13 @@ enum perf_event_type { * char data[size];}&& PERF_SAMPLE_RAW * * { u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK + * + * { u64 abi; # enum perf_sample_regs_abi + * u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER + * + * { u64 size; + * char data[size]; + * u64 dyn_size; } && PERF_SAMPLE_STACK_USER * }; */ PERF_RECORD_SAMPLE = 9, @@ -609,6 +648,7 @@ struct perf_guest_info_callbacks { #include <linux/static_key.h> #include <linux/atomic.h> #include <linux/sysfs.h> +#include <linux/perf_regs.h> #include <asm/local.h> struct perf_callchain_entry { @@ -654,6 +694,11 @@ struct perf_branch_stack { struct perf_branch_entry entries[0]; }; +struct perf_regs_user { + __u64 abi; + struct pt_regs *regs; +}; + struct task_struct; /* @@ -1133,6 +1178,8 @@ struct perf_sample_data { struct perf_callchain_entry *callchain; struct perf_raw_record *raw; struct perf_branch_stack *br_stack; + struct perf_regs_user regs_user; + u64 stack_user_size; }; static inline void perf_sample_data_init(struct perf_sample_data *data, @@ -1142,7 +1189,10 @@ static inline void perf_sample_data_init(struct perf_sample_data *data, data->addr = addr; data->raw = NULL; data->br_stack = NULL; - data->period = period; + data->period = period; + data->regs_user.abi = PERF_SAMPLE_REGS_ABI_NONE; + data->regs_user.regs = NULL; + data->stack_user_size = 0; } extern void perf_output_sample(struct perf_output_handle *handle, @@ -1290,8 +1340,10 @@ static inline bool has_branch_stack(struct perf_event *event) extern int perf_output_begin(struct perf_output_handle *handle, struct perf_event *event, unsigned int size); extern void perf_output_end(struct perf_output_handle *handle); -extern void perf_output_copy(struct perf_output_handle *handle, +extern unsigned int perf_output_copy(struct perf_output_handle *handle, const void *buf, unsigned int len); +extern unsigned int perf_output_skip(struct perf_output_handle *handle, + unsigned int len); extern int perf_swevent_get_recursion_context(void); extern void perf_swevent_put_recursion_context(int rctx); extern void perf_event_enable(struct perf_event *event); diff --git a/include/linux/perf_regs.h b/include/linux/perf_regs.h new file mode 100644 index 000000000000..3c73d5fe18be --- /dev/null +++ b/include/linux/perf_regs.h @@ -0,0 +1,25 @@ +#ifndef _LINUX_PERF_REGS_H +#define _LINUX_PERF_REGS_H + +#ifdef CONFIG_HAVE_PERF_REGS +#include <asm/perf_regs.h> +u64 perf_reg_value(struct pt_regs *regs, int idx); +int perf_reg_validate(u64 mask); +u64 perf_reg_abi(struct task_struct *task); +#else +static inline u64 perf_reg_value(struct pt_regs *regs, int idx) +{ + return 0; +} + +static inline int perf_reg_validate(u64 mask) +{ + return mask ? -ENOSYS : 0; +} + +static inline u64 perf_reg_abi(struct task_struct *task) +{ + return PERF_SAMPLE_REGS_ABI_NONE; +} +#endif /* CONFIG_HAVE_PERF_REGS */ +#endif /* _LINUX_PERF_REGS_H */ diff --git a/include/linux/platform_data/ad5755.h b/include/linux/platform_data/ad5755.h new file mode 100644 index 000000000000..a5a1cb751874 --- /dev/null +++ b/include/linux/platform_data/ad5755.h @@ -0,0 +1,103 @@ +/* + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ +#ifndef __LINUX_PLATFORM_DATA_AD5755_H__ +#define __LINUX_PLATFORM_DATA_AD5755_H__ + +enum ad5755_mode { + AD5755_MODE_VOLTAGE_0V_5V = 0, + AD5755_MODE_VOLTAGE_0V_10V = 1, + AD5755_MODE_VOLTAGE_PLUSMINUS_5V = 2, + AD5755_MODE_VOLTAGE_PLUSMINUS_10V = 3, + AD5755_MODE_CURRENT_4mA_20mA = 4, + AD5755_MODE_CURRENT_0mA_20mA = 5, + AD5755_MODE_CURRENT_0mA_24mA = 6, +}; + +enum ad5755_dc_dc_phase { + AD5755_DC_DC_PHASE_ALL_SAME_EDGE = 0, + AD5755_DC_DC_PHASE_A_B_SAME_EDGE_C_D_OPP_EDGE = 1, + AD5755_DC_DC_PHASE_A_C_SAME_EDGE_B_D_OPP_EDGE = 2, + AD5755_DC_DC_PHASE_90_DEGREE = 3, +}; + +enum ad5755_dc_dc_freq { + AD5755_DC_DC_FREQ_250kHZ = 0, + AD5755_DC_DC_FREQ_410kHZ = 1, + AD5755_DC_DC_FREQ_650kHZ = 2, +}; + +enum ad5755_dc_dc_maxv { + AD5755_DC_DC_MAXV_23V = 0, + AD5755_DC_DC_MAXV_24V5 = 1, + AD5755_DC_DC_MAXV_27V = 2, + AD5755_DC_DC_MAXV_29V5 = 3, +}; + +enum ad5755_slew_rate { + AD5755_SLEW_RATE_64k = 0, + AD5755_SLEW_RATE_32k = 1, + AD5755_SLEW_RATE_16k = 2, + AD5755_SLEW_RATE_8k = 3, + AD5755_SLEW_RATE_4k = 4, + AD5755_SLEW_RATE_2k = 5, + AD5755_SLEW_RATE_1k = 6, + AD5755_SLEW_RATE_500 = 7, + AD5755_SLEW_RATE_250 = 8, + AD5755_SLEW_RATE_125 = 9, + AD5755_SLEW_RATE_64 = 10, + AD5755_SLEW_RATE_32 = 11, + AD5755_SLEW_RATE_16 = 12, + AD5755_SLEW_RATE_8 = 13, + AD5755_SLEW_RATE_4 = 14, + AD5755_SLEW_RATE_0_5 = 15, +}; + +enum ad5755_slew_step_size { + AD5755_SLEW_STEP_SIZE_1 = 0, + AD5755_SLEW_STEP_SIZE_2 = 1, + AD5755_SLEW_STEP_SIZE_4 = 2, + AD5755_SLEW_STEP_SIZE_8 = 3, + AD5755_SLEW_STEP_SIZE_16 = 4, + AD5755_SLEW_STEP_SIZE_32 = 5, + AD5755_SLEW_STEP_SIZE_64 = 6, + AD5755_SLEW_STEP_SIZE_128 = 7, + AD5755_SLEW_STEP_SIZE_256 = 8, +}; + +/** + * struct ad5755_platform_data - AD5755 DAC driver platform data + * @ext_dc_dc_compenstation_resistor: Whether an external DC-DC converter + * compensation register is used. + * @dc_dc_phase: DC-DC converter phase. + * @dc_dc_freq: DC-DC converter frequency. + * @dc_dc_maxv: DC-DC maximum allowed boost voltage. + * @dac.mode: The mode to be used for the DAC output. + * @dac.ext_current_sense_resistor: Whether an external current sense resistor + * is used. + * @dac.enable_voltage_overrange: Whether to enable 20% voltage output overrange. + * @dac.slew.enable: Whether to enable digital slew. + * @dac.slew.rate: Slew rate of the digital slew. + * @dac.slew.step_size: Slew step size of the digital slew. + **/ +struct ad5755_platform_data { + bool ext_dc_dc_compenstation_resistor; + enum ad5755_dc_dc_phase dc_dc_phase; + enum ad5755_dc_dc_freq dc_dc_freq; + enum ad5755_dc_dc_maxv dc_dc_maxv; + + struct { + enum ad5755_mode mode; + bool ext_current_sense_resistor; + bool enable_voltage_overrange; + struct { + bool enable; + enum ad5755_slew_rate rate; + enum ad5755_slew_step_size step_size; + } slew; + } dac[4]; +}; + +#endif diff --git a/include/linux/platform_data/ad7791.h b/include/linux/platform_data/ad7791.h new file mode 100644 index 000000000000..f9e4db1b82ae --- /dev/null +++ b/include/linux/platform_data/ad7791.h @@ -0,0 +1,17 @@ +#ifndef __LINUX_PLATFORM_DATA_AD7791__ +#define __LINUX_PLATFORM_DATA_AD7791__ + +/** + * struct ad7791_platform_data - AD7791 device platform data + * @buffered: If set to true configure the device for buffered input mode. + * @burnout_current: If set to true the 100mA burnout current is enabled. + * @unipolar: If set to true sample in unipolar mode, if set to false sample in + * bipolar mode. + */ +struct ad7791_platform_data { + bool buffered; + bool burnout_current; + bool unipolar; +}; + +#endif diff --git a/include/linux/platform_data/clk-realview.h b/include/linux/platform_data/clk-realview.h new file mode 100644 index 000000000000..2e426a7dbc51 --- /dev/null +++ b/include/linux/platform_data/clk-realview.h @@ -0,0 +1 @@ +void realview_clk_init(void __iomem *sysbase, bool is_pb1176); diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h new file mode 100644 index 000000000000..3af0da1f3be5 --- /dev/null +++ b/include/linux/platform_data/clk-ux500.h @@ -0,0 +1,17 @@ +/* + * Clock definitions for ux500 platforms + * + * Copyright (C) 2012 ST-Ericsson SA + * Author: Ulf Hansson <ulf.hansson@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __CLK_UX500_H +#define __CLK_UX500_H + +void u8500_clk_init(void); +void u9540_clk_init(void); +void u8540_clk_init(void); + +#endif /* __CLK_UX500_H */ diff --git a/include/linux/platform_data/max197.h b/include/linux/platform_data/max197.h new file mode 100644 index 000000000000..e2a41dd7690c --- /dev/null +++ b/include/linux/platform_data/max197.h @@ -0,0 +1,21 @@ +/* + * Maxim MAX197 A/D Converter Driver + * + * Copyright (c) 2012 Savoir-faire Linux Inc. + * Vivien Didelot <vivien.didelot@savoirfairelinux.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * For further information, see the Documentation/hwmon/max197 file. + */ + +/** + * struct max197_platform_data - MAX197 connectivity info + * @convert: Function used to start a conversion with control byte ctrl. + * It must return the raw data, or a negative error code. + */ +struct max197_platform_data { + int (*convert)(u8 ctrl); +}; diff --git a/include/linux/sht15.h b/include/linux/platform_data/sht15.h index f85c7c523da0..33e0fd27225e 100644 --- a/include/linux/sht15.h +++ b/include/linux/platform_data/sht15.h @@ -31,4 +31,3 @@ struct sht15_platform_data { bool no_otp_reload; bool low_resolution; }; - diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index 60e9994ef405..5711e9525a2a 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -14,11 +14,15 @@ #include <linux/device.h> #include <linux/mod_devicetable.h> +#define PLATFORM_DEVID_NONE (-1) +#define PLATFORM_DEVID_AUTO (-2) + struct mfd_cell; struct platform_device { const char * name; int id; + bool id_auto; struct device dev; u32 num_resources; struct resource * resource; diff --git a/include/linux/pm.h b/include/linux/pm.h index f067e60a3832..88f034a23f2c 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -638,6 +638,7 @@ extern void __suspend_report_result(const char *function, void *fn, int ret); } while (0) extern int device_pm_wait_for_dev(struct device *sub, struct device *dev); +extern void dpm_for_each_dev(void *data, void (*fn)(struct device *, void *)); extern int pm_generic_prepare(struct device *dev); extern int pm_generic_suspend_late(struct device *dev); @@ -677,6 +678,10 @@ static inline int device_pm_wait_for_dev(struct device *a, struct device *b) return 0; } +static inline void dpm_for_each_dev(void *data, void (*fn)(struct device *, void *)) +{ +} + #define pm_generic_prepare NULL #define pm_generic_suspend NULL #define pm_generic_resume NULL diff --git a/include/linux/power/generic-adc-battery.h b/include/linux/power/generic-adc-battery.h new file mode 100644 index 000000000000..b1ebe08533b6 --- /dev/null +++ b/include/linux/power/generic-adc-battery.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2012, Anish Kumar <anish198519851985@gmail.com> + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef GENERIC_ADC_BATTERY_H +#define GENERIC_ADC_BATTERY_H + +/** + * struct gab_platform_data - platform_data for generic adc iio battery driver. + * @battery_info: recommended structure to specify static power supply + * parameters + * @cal_charge: calculate charge level. + * @gpio_charge_finished: gpio for the charger. + * @gpio_inverted: Should be 1 if the GPIO is active low otherwise 0 + * @jitter_delay: delay required after the interrupt to check battery + * status.Default set is 10ms. + */ +struct gab_platform_data { + struct power_supply_info battery_info; + int (*cal_charge)(long value); + int gpio_charge_finished; + bool gpio_inverted; + int jitter_delay; +}; + +#endif /* GENERIC_ADC_BATTERY_H */ diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 115ead2b5155..7c968e4f929e 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -191,6 +191,21 @@ extern void rcu_idle_enter(void); extern void rcu_idle_exit(void); extern void rcu_irq_enter(void); extern void rcu_irq_exit(void); + +#ifdef CONFIG_RCU_USER_QS +extern void rcu_user_enter(void); +extern void rcu_user_exit(void); +extern void rcu_user_enter_after_irq(void); +extern void rcu_user_exit_after_irq(void); +extern void rcu_user_hooks_switch(struct task_struct *prev, + struct task_struct *next); +#else +static inline void rcu_user_enter(void) { } +static inline void rcu_user_exit(void) { } +static inline void rcu_user_enter_after_irq(void) { } +static inline void rcu_user_exit_after_irq(void) { } +#endif /* CONFIG_RCU_USER_QS */ + extern void exit_rcu(void); /** @@ -210,14 +225,12 @@ extern void exit_rcu(void); * to nest RCU_NONIDLE() wrappers, but the nesting level is currently * quite limited. If deeper nesting is required, it will be necessary * to adjust DYNTICK_TASK_NESTING_VALUE accordingly. - * - * This macro may be used from process-level code only. */ #define RCU_NONIDLE(a) \ do { \ - rcu_idle_exit(); \ + rcu_irq_enter(); \ do { a; } while (0); \ - rcu_idle_enter(); \ + rcu_irq_exit(); \ } while (0) /* diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 7f7e00df3adf..e3bcc3f4dcb8 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -285,6 +285,7 @@ struct regmap_irq { * @ack_base: Base ack address. If zero then the chip is clear on read. * @wake_base: Base address for wake enables. If zero unsupported. * @irq_reg_stride: Stride to use for chips where registers are not contiguous. + * @runtime_pm: Hold a runtime PM lock on the device when accessing it. * * @num_regs: Number of registers in each control bank. * @irqs: Descriptors for individual IRQs. Interrupt numbers are @@ -299,6 +300,8 @@ struct regmap_irq_chip { unsigned int ack_base; unsigned int wake_base; unsigned int irq_reg_stride; + unsigned int mask_invert; + bool runtime_pm; int num_regs; diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index da339fd8c755..c43cd3556b1f 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -177,6 +177,8 @@ int regulator_set_mode(struct regulator *regulator, unsigned int mode); unsigned int regulator_get_mode(struct regulator *regulator); int regulator_set_optimum_mode(struct regulator *regulator, int load_uA); +int regulator_allow_bypass(struct regulator *regulator, bool allow); + /* regulator notifier block */ int regulator_register_notifier(struct regulator *regulator, struct notifier_block *nb); @@ -328,6 +330,12 @@ static inline int regulator_set_optimum_mode(struct regulator *regulator, return REGULATOR_MODE_NORMAL; } +static inline int regulator_allow_bypass(struct regulator *regulator, + bool allow) +{ + return 0; +} + static inline int regulator_register_notifier(struct regulator *regulator, struct notifier_block *nb) { @@ -352,4 +360,11 @@ static inline void regulator_set_drvdata(struct regulator *regulator, #endif +static inline int regulator_set_voltage_tol(struct regulator *regulator, + int new_uV, int tol_uV) +{ + return regulator_set_voltage(regulator, + new_uV - tol_uV, new_uV + tol_uV); +} + #endif diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index bac4c871f3bd..7932a3bf21bd 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -32,6 +32,8 @@ enum regulator_status { REGULATOR_STATUS_NORMAL, REGULATOR_STATUS_IDLE, REGULATOR_STATUS_STANDBY, + /* The regulator is enabled but not regulating */ + REGULATOR_STATUS_BYPASS, /* in case that any other status doesn't apply */ REGULATOR_STATUS_UNDEFINED, }; @@ -58,6 +60,7 @@ enum regulator_status { * regulator_desc.n_voltages. Voltages may be reported in any order. * * @set_current_limit: Configure a limit for a current-limited regulator. + * The driver should select the current closest to max_uA. * @get_current_limit: Get the configured limit for a current-limited regulator. * * @set_mode: Set the configured operating mode for the regulator. @@ -67,6 +70,9 @@ enum regulator_status { * @get_optimum_mode: Get the most efficient operating mode for the regulator * when running with the specified parameters. * + * @set_bypass: Set the regulator in bypass mode. + * @get_bypass: Get the regulator bypass mode state. + * * @enable_time: Time taken for the regulator voltage output voltage to * stabilise after being enabled, in microseconds. * @set_ramp_delay: Set the ramp delay for the regulator. The driver should @@ -133,6 +139,10 @@ struct regulator_ops { unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV, int output_uV, int load_uA); + /* control and report on bypass mode */ + int (*set_bypass)(struct regulator_dev *dev, bool enable); + int (*get_bypass)(struct regulator_dev *dev, bool *enable); + /* the operations below are for configuration of regulator state when * its parent PMIC enters a global STANDBY/HIBERNATE state */ @@ -205,6 +215,8 @@ struct regulator_desc { unsigned int vsel_mask; unsigned int enable_reg; unsigned int enable_mask; + unsigned int bypass_reg; + unsigned int bypass_mask; unsigned int enable_time; }; @@ -221,7 +233,8 @@ struct regulator_desc { * @driver_data: private regulator data * @of_node: OpenFirmware node to parse for device tree bindings (may be * NULL). - * @regmap: regmap to use for core regmap helpers + * @regmap: regmap to use for core regmap helpers if dev_get_regulator() is + * insufficient. * @ena_gpio: GPIO controlling regulator enable. * @ena_gpio_invert: Sense for GPIO enable control. * @ena_gpio_flags: Flags to use when calling gpio_request_one() @@ -253,6 +266,7 @@ struct regulator_dev { int exclusive; u32 use_count; u32 open_count; + u32 bypass_count; /* lists we belong to */ struct list_head list; /* list of all regulators */ @@ -310,6 +324,8 @@ int regulator_disable_regmap(struct regulator_dev *rdev); int regulator_set_voltage_time_sel(struct regulator_dev *rdev, unsigned int old_selector, unsigned int new_selector); +int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable); +int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable); void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); diff --git a/include/linux/regulator/fan53555.h b/include/linux/regulator/fan53555.h new file mode 100644 index 000000000000..5c45c85d52ca --- /dev/null +++ b/include/linux/regulator/fan53555.h @@ -0,0 +1,60 @@ +/* + * fan53555.h - Fairchild Regulator FAN53555 Driver + * + * Copyright (C) 2012 Marvell Technology Ltd. + * Yunfan Zhang <yfzhang@marvell.com> + * + * This package is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __FAN53555_H__ + +/* VSEL ID */ +enum { + FAN53555_VSEL_ID_0 = 0, + FAN53555_VSEL_ID_1, +}; + +/* Transition slew rate limiting from a low to high voltage. + * ----------------------- + * Bin |Slew Rate(mV/uS) + * ------|---------------- + * 000 | 64.00 + * ------|---------------- + * 001 | 32.00 + * ------|---------------- + * 010 | 16.00 + * ------|---------------- + * 011 | 8.00 + * ------|---------------- + * 100 | 4.00 + * ------|---------------- + * 101 | 2.00 + * ------|---------------- + * 110 | 1.00 + * ------|---------------- + * 111 | 0.50 + * ----------------------- + */ +enum { + FAN53555_SLEW_RATE_64MV = 0, + FAN53555_SLEW_RATE_32MV, + FAN53555_SLEW_RATE_16MV, + FAN53555_SLEW_RATE_8MV, + FAN53555_SLEW_RATE_4MV, + FAN53555_SLEW_RATE_2MV, + FAN53555_SLEW_RATE_1MV, + FAN53555_SLEW_RATE_0_5MV, +}; + +struct fan53555_platform_data { + struct regulator_init_data *regulator; + unsigned int slew_rate; + /* Sleep VSEL ID */ + unsigned int sleep_vsel_id; +}; + +#endif /* __FAN53555_H__ */ diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 40dd0a394cfa..36adbc82de6a 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -32,6 +32,7 @@ struct regulator; * board/machine. * STATUS: Regulator can be enabled and disabled. * DRMS: Dynamic Regulator Mode Switching is enabled for this regulator. + * BYPASS: Regulator can be put into bypass mode */ #define REGULATOR_CHANGE_VOLTAGE 0x1 @@ -39,6 +40,7 @@ struct regulator; #define REGULATOR_CHANGE_MODE 0x4 #define REGULATOR_CHANGE_STATUS 0x8 #define REGULATOR_CHANGE_DRMS 0x10 +#define REGULATOR_CHANGE_BYPASS 0x20 /** * struct regulator_state - regulator state during low power system states diff --git a/include/linux/sched.h b/include/linux/sched.h index 23bddac4bad8..765dffbb085e 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -273,11 +273,11 @@ extern void init_idle_bootup_task(struct task_struct *idle); extern int runqueue_is_locked(int cpu); #if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ) -extern void select_nohz_load_balancer(int stop_tick); +extern void nohz_balance_enter_idle(int cpu); extern void set_cpu_sd_state_idle(void); extern int get_nohz_timer_target(void); #else -static inline void select_nohz_load_balancer(int stop_tick) { } +static inline void nohz_balance_enter_idle(int cpu) { } static inline void set_cpu_sd_state_idle(void) { } #endif @@ -446,6 +446,9 @@ extern int get_dumpable(struct mm_struct *mm); #define MMF_VM_HUGEPAGE 17 /* set when VM_HUGEPAGE is set on vma */ #define MMF_EXE_FILE_CHANGED 18 /* see prctl_set_mm_exe_file() */ +#define MMF_HAS_UPROBES 19 /* has uprobes */ +#define MMF_RECALC_UPROBES 20 /* MMF_HAS_UPROBES can be wrong */ + #define MMF_INIT_MASK (MMF_DUMPABLE_MASK | MMF_DUMP_FILTER_MASK) struct sighand_struct { @@ -678,11 +681,6 @@ struct signal_struct { * (notably. ptrace) */ }; -/* Context switch must be unlocked if interrupts are to be enabled */ -#ifdef __ARCH_WANT_INTERRUPTS_ON_CTXSW -# define __ARCH_WANT_UNLOCKED_CTXSW -#endif - /* * Bits in flags field of signal_struct. */ @@ -860,7 +858,6 @@ enum cpu_idle_type { #define SD_BALANCE_FORK 0x0008 /* Balance on fork, clone */ #define SD_BALANCE_WAKE 0x0010 /* Balance on wakeup */ #define SD_WAKE_AFFINE 0x0020 /* Wake task to waking CPU */ -#define SD_PREFER_LOCAL 0x0040 /* Prefer to keep tasks local to this domain */ #define SD_SHARE_CPUPOWER 0x0080 /* Domain members share cpu power */ #define SD_SHARE_PKG_RESOURCES 0x0200 /* Domain members share cpu pkg resources */ #define SD_SERIALIZE 0x0400 /* Only a single load balancing instance */ @@ -1885,6 +1882,14 @@ static inline void rcu_copy_process(struct task_struct *p) #endif +static inline void rcu_switch(struct task_struct *prev, + struct task_struct *next) +{ +#ifdef CONFIG_RCU_USER_QS + rcu_user_hooks_switch(prev, next); +#endif +} + static inline void tsk_restore_flags(struct task_struct *task, unsigned long orig_flags, unsigned long flags) { diff --git a/include/linux/screen_info.h b/include/linux/screen_info.h index 899fbb487c94..fb3c5a8fef3d 100644 --- a/include/linux/screen_info.h +++ b/include/linux/screen_info.h @@ -68,6 +68,8 @@ struct screen_info { #define VIDEO_FLAGS_NOCURSOR (1 << 0) /* The video mode has no cursor set */ +#define VIDEO_CAPABILITY_SKIP_QUIRKS (1 << 0) + #ifdef __KERNEL__ extern struct screen_info screen_info; diff --git a/include/linux/security.h b/include/linux/security.h index 3dea6a9d568f..d143b8e01954 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -118,6 +118,7 @@ void reset_security_ops(void); extern unsigned long mmap_min_addr; extern unsigned long dac_mmap_min_addr; #else +#define mmap_min_addr 0UL #define dac_mmap_min_addr 0UL #endif diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 7cf0b68bbe9e..f9b22ec7a9f3 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -48,7 +48,8 @@ #define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */ #define PORT_XR17D15X 21 /* Exar XR17D15x UART */ #define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */ -#define PORT_MAX_8250 22 /* max port ID */ +#define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */ +#define PORT_MAX_8250 23 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed @@ -274,6 +275,7 @@ struct uart_ops { int (*verify_port)(struct uart_port *, struct serial_struct *); int (*ioctl)(struct uart_port *, unsigned int, unsigned long); #ifdef CONFIG_CONSOLE_POLL + int (*poll_init)(struct uart_port *); void (*poll_put_char)(struct uart_port *, unsigned char); int (*poll_get_char)(struct uart_port *); #endif diff --git a/include/linux/smpboot.h b/include/linux/smpboot.h new file mode 100644 index 000000000000..e0106d8581d3 --- /dev/null +++ b/include/linux/smpboot.h @@ -0,0 +1,43 @@ +#ifndef _LINUX_SMPBOOT_H +#define _LINUX_SMPBOOT_H + +#include <linux/types.h> + +struct task_struct; +/* Cookie handed to the thread_fn*/ +struct smpboot_thread_data; + +/** + * struct smp_hotplug_thread - CPU hotplug related thread descriptor + * @store: Pointer to per cpu storage for the task pointers + * @list: List head for core management + * @thread_should_run: Check whether the thread should run or not. Called with + * preemption disabled. + * @thread_fn: The associated thread function + * @setup: Optional setup function, called when the thread gets + * operational the first time + * @cleanup: Optional cleanup function, called when the thread + * should stop (module exit) + * @park: Optional park function, called when the thread is + * parked (cpu offline) + * @unpark: Optional unpark function, called when the thread is + * unparked (cpu online) + * @thread_comm: The base name of the thread + */ +struct smp_hotplug_thread { + struct task_struct __percpu **store; + struct list_head list; + int (*thread_should_run)(unsigned int cpu); + void (*thread_fn)(unsigned int cpu); + void (*setup)(unsigned int cpu); + void (*cleanup)(unsigned int cpu, bool online); + void (*park)(unsigned int cpu); + void (*unpark)(unsigned int cpu); + const char *thread_comm; +}; + +int smpboot_register_percpu_thread(struct smp_hotplug_thread *plug_thread); +void smpboot_unregister_percpu_thread(struct smp_hotplug_thread *plug_thread); +int smpboot_thread_schedule(void); + +#endif diff --git a/include/linux/task_work.h b/include/linux/task_work.h index fb46b03b1852..ca5a1cf27dae 100644 --- a/include/linux/task_work.h +++ b/include/linux/task_work.h @@ -18,8 +18,7 @@ void task_work_run(void); static inline void exit_task_work(struct task_struct *task) { - if (unlikely(task->task_works)) - task_work_run(); + task_work_run(); } #endif /* _LINUX_TASK_WORK_H */ diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h index 3ca0269dd0b5..932b76392248 100644 --- a/include/linux/ti_wilink_st.h +++ b/include/linux/ti_wilink_st.h @@ -281,9 +281,10 @@ struct kim_data_s { long st_kim_start(void *); long st_kim_stop(void *); -void st_kim_recv(void *, const unsigned char *, long count); void st_kim_complete(void *); void kim_st_list_protocols(struct st_data_s *, void *); +void st_kim_recv(void *, const unsigned char *, long); + /* * BTS headers diff --git a/include/linux/timer.h b/include/linux/timer.h index 6abd9138beda..8c5a197e1587 100644 --- a/include/linux/timer.h +++ b/include/linux/timer.h @@ -49,147 +49,112 @@ extern struct tvec_base boot_tvec_bases; #endif /* - * Note that all tvec_bases are 2 byte aligned and lower bit of - * base in timer_list is guaranteed to be zero. Use the LSB to - * indicate whether the timer is deferrable. + * Note that all tvec_bases are at least 4 byte aligned and lower two bits + * of base in timer_list is guaranteed to be zero. Use them for flags. * * A deferrable timer will work normally when the system is busy, but * will not cause a CPU to come out of idle just to service it; instead, * the timer will be serviced when the CPU eventually wakes up with a * subsequent non-deferrable timer. + * + * An irqsafe timer is executed with IRQ disabled and it's safe to wait for + * the completion of the running instance from IRQ handlers, for example, + * by calling del_timer_sync(). + * + * Note: The irq disabled callback execution is a special case for + * workqueue locking issues. It's not meant for executing random crap + * with interrupts disabled. Abuse is monitored! */ -#define TBASE_DEFERRABLE_FLAG (0x1) +#define TIMER_DEFERRABLE 0x1LU +#define TIMER_IRQSAFE 0x2LU -#define TIMER_INITIALIZER(_function, _expires, _data) { \ +#define TIMER_FLAG_MASK 0x3LU + +#define __TIMER_INITIALIZER(_function, _expires, _data, _flags) { \ .entry = { .prev = TIMER_ENTRY_STATIC }, \ .function = (_function), \ .expires = (_expires), \ .data = (_data), \ - .base = &boot_tvec_bases, \ + .base = (void *)((unsigned long)&boot_tvec_bases + (_flags)), \ .slack = -1, \ __TIMER_LOCKDEP_MAP_INITIALIZER( \ __FILE__ ":" __stringify(__LINE__)) \ } -#define TBASE_MAKE_DEFERRED(ptr) ((struct tvec_base *) \ - ((unsigned char *)(ptr) + TBASE_DEFERRABLE_FLAG)) +#define TIMER_INITIALIZER(_function, _expires, _data) \ + __TIMER_INITIALIZER((_function), (_expires), (_data), 0) -#define TIMER_DEFERRED_INITIALIZER(_function, _expires, _data) {\ - .entry = { .prev = TIMER_ENTRY_STATIC }, \ - .function = (_function), \ - .expires = (_expires), \ - .data = (_data), \ - .base = TBASE_MAKE_DEFERRED(&boot_tvec_bases), \ - __TIMER_LOCKDEP_MAP_INITIALIZER( \ - __FILE__ ":" __stringify(__LINE__)) \ - } +#define TIMER_DEFERRED_INITIALIZER(_function, _expires, _data) \ + __TIMER_INITIALIZER((_function), (_expires), (_data), TIMER_DEFERRABLE) #define DEFINE_TIMER(_name, _function, _expires, _data) \ struct timer_list _name = \ TIMER_INITIALIZER(_function, _expires, _data) -void init_timer_key(struct timer_list *timer, - const char *name, - struct lock_class_key *key); -void init_timer_deferrable_key(struct timer_list *timer, - const char *name, - struct lock_class_key *key); +void init_timer_key(struct timer_list *timer, unsigned int flags, + const char *name, struct lock_class_key *key); + +#ifdef CONFIG_DEBUG_OBJECTS_TIMERS +extern void init_timer_on_stack_key(struct timer_list *timer, + unsigned int flags, const char *name, + struct lock_class_key *key); +extern void destroy_timer_on_stack(struct timer_list *timer); +#else +static inline void destroy_timer_on_stack(struct timer_list *timer) { } +static inline void init_timer_on_stack_key(struct timer_list *timer, + unsigned int flags, const char *name, + struct lock_class_key *key) +{ + init_timer_key(timer, flags, name, key); +} +#endif #ifdef CONFIG_LOCKDEP -#define init_timer(timer) \ +#define __init_timer(_timer, _flags) \ do { \ static struct lock_class_key __key; \ - init_timer_key((timer), #timer, &__key); \ + init_timer_key((_timer), (_flags), #_timer, &__key); \ } while (0) -#define init_timer_deferrable(timer) \ +#define __init_timer_on_stack(_timer, _flags) \ do { \ static struct lock_class_key __key; \ - init_timer_deferrable_key((timer), #timer, &__key); \ + init_timer_on_stack_key((_timer), (_flags), #_timer, &__key); \ } while (0) +#else +#define __init_timer(_timer, _flags) \ + init_timer_key((_timer), (_flags), NULL, NULL) +#define __init_timer_on_stack(_timer, _flags) \ + init_timer_on_stack_key((_timer), (_flags), NULL, NULL) +#endif +#define init_timer(timer) \ + __init_timer((timer), 0) +#define init_timer_deferrable(timer) \ + __init_timer((timer), TIMER_DEFERRABLE) #define init_timer_on_stack(timer) \ + __init_timer_on_stack((timer), 0) + +#define __setup_timer(_timer, _fn, _data, _flags) \ do { \ - static struct lock_class_key __key; \ - init_timer_on_stack_key((timer), #timer, &__key); \ + __init_timer((_timer), (_flags)); \ + (_timer)->function = (_fn); \ + (_timer)->data = (_data); \ } while (0) -#define setup_timer(timer, fn, data) \ +#define __setup_timer_on_stack(_timer, _fn, _data, _flags) \ do { \ - static struct lock_class_key __key; \ - setup_timer_key((timer), #timer, &__key, (fn), (data));\ + __init_timer_on_stack((_timer), (_flags)); \ + (_timer)->function = (_fn); \ + (_timer)->data = (_data); \ } while (0) +#define setup_timer(timer, fn, data) \ + __setup_timer((timer), (fn), (data), 0) #define setup_timer_on_stack(timer, fn, data) \ - do { \ - static struct lock_class_key __key; \ - setup_timer_on_stack_key((timer), #timer, &__key, \ - (fn), (data)); \ - } while (0) + __setup_timer_on_stack((timer), (fn), (data), 0) #define setup_deferrable_timer_on_stack(timer, fn, data) \ - do { \ - static struct lock_class_key __key; \ - setup_deferrable_timer_on_stack_key((timer), #timer, \ - &__key, (fn), \ - (data)); \ - } while (0) -#else -#define init_timer(timer)\ - init_timer_key((timer), NULL, NULL) -#define init_timer_deferrable(timer)\ - init_timer_deferrable_key((timer), NULL, NULL) -#define init_timer_on_stack(timer)\ - init_timer_on_stack_key((timer), NULL, NULL) -#define setup_timer(timer, fn, data)\ - setup_timer_key((timer), NULL, NULL, (fn), (data)) -#define setup_timer_on_stack(timer, fn, data)\ - setup_timer_on_stack_key((timer), NULL, NULL, (fn), (data)) -#define setup_deferrable_timer_on_stack(timer, fn, data)\ - setup_deferrable_timer_on_stack_key((timer), NULL, NULL, (fn), (data)) -#endif - -#ifdef CONFIG_DEBUG_OBJECTS_TIMERS -extern void init_timer_on_stack_key(struct timer_list *timer, - const char *name, - struct lock_class_key *key); -extern void destroy_timer_on_stack(struct timer_list *timer); -#else -static inline void destroy_timer_on_stack(struct timer_list *timer) { } -static inline void init_timer_on_stack_key(struct timer_list *timer, - const char *name, - struct lock_class_key *key) -{ - init_timer_key(timer, name, key); -} -#endif - -static inline void setup_timer_key(struct timer_list * timer, - const char *name, - struct lock_class_key *key, - void (*function)(unsigned long), - unsigned long data) -{ - timer->function = function; - timer->data = data; - init_timer_key(timer, name, key); -} - -static inline void setup_timer_on_stack_key(struct timer_list *timer, - const char *name, - struct lock_class_key *key, - void (*function)(unsigned long), - unsigned long data) -{ - timer->function = function; - timer->data = data; - init_timer_on_stack_key(timer, name, key); -} - -extern void setup_deferrable_timer_on_stack_key(struct timer_list *timer, - const char *name, - struct lock_class_key *key, - void (*function)(unsigned long), - unsigned long data); + __setup_timer_on_stack((timer), (fn), (data), TIMER_DEFERRABLE) /** * timer_pending - is a timer pending? diff --git a/include/linux/topology.h b/include/linux/topology.h index fec12d667211..d3cf0d6e7712 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -129,7 +129,6 @@ int arch_update_cpu_topology(void); | 1*SD_BALANCE_FORK \ | 0*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ - | 0*SD_PREFER_LOCAL \ | 0*SD_SHARE_CPUPOWER \ | 1*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ @@ -160,7 +159,6 @@ int arch_update_cpu_topology(void); | 1*SD_BALANCE_FORK \ | 0*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ - | 0*SD_PREFER_LOCAL \ | 0*SD_SHARE_CPUPOWER \ | 0*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index 802de56c41e8..2f322c38bd4d 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -136,6 +136,22 @@ static inline void tracepoint_synchronize_unregister(void) postrcu; \ } while (0) +#ifndef MODULE +#define __DECLARE_TRACE_RCU(name, proto, args, cond, data_proto, data_args) \ + static inline void trace_##name##_rcuidle(proto) \ + { \ + if (static_key_false(&__tracepoint_##name.key)) \ + __DO_TRACE(&__tracepoint_##name, \ + TP_PROTO(data_proto), \ + TP_ARGS(data_args), \ + TP_CONDITION(cond), \ + rcu_idle_exit(), \ + rcu_idle_enter()); \ + } +#else +#define __DECLARE_TRACE_RCU(name, proto, args, cond, data_proto, data_args) +#endif + /* * Make sure the alignment of the structure in the __tracepoints section will * not add unwanted padding between the beginning of the section and the @@ -151,16 +167,8 @@ static inline void tracepoint_synchronize_unregister(void) TP_ARGS(data_args), \ TP_CONDITION(cond),,); \ } \ - static inline void trace_##name##_rcuidle(proto) \ - { \ - if (static_key_false(&__tracepoint_##name.key)) \ - __DO_TRACE(&__tracepoint_##name, \ - TP_PROTO(data_proto), \ - TP_ARGS(data_args), \ - TP_CONDITION(cond), \ - rcu_idle_exit(), \ - rcu_idle_enter()); \ - } \ + __DECLARE_TRACE_RCU(name, PARAMS(proto), PARAMS(args), \ + PARAMS(cond), PARAMS(data_proto), PARAMS(data_args)) \ static inline int \ register_trace_##name(void (*probe)(data_proto), void *data) \ { \ diff --git a/include/linux/uprobes.h b/include/linux/uprobes.h index efe4b3308c74..e6f0331e3d45 100644 --- a/include/linux/uprobes.h +++ b/include/linux/uprobes.h @@ -99,25 +99,27 @@ struct xol_area { struct uprobes_state { struct xol_area *xol_area; - atomic_t count; }; + extern int __weak set_swbp(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long vaddr); -extern int __weak set_orig_insn(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long vaddr, bool verify); +extern int __weak set_orig_insn(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long vaddr); extern bool __weak is_swbp_insn(uprobe_opcode_t *insn); extern int uprobe_register(struct inode *inode, loff_t offset, struct uprobe_consumer *uc); extern void uprobe_unregister(struct inode *inode, loff_t offset, struct uprobe_consumer *uc); extern int uprobe_mmap(struct vm_area_struct *vma); extern void uprobe_munmap(struct vm_area_struct *vma, unsigned long start, unsigned long end); +extern void uprobe_dup_mmap(struct mm_struct *oldmm, struct mm_struct *newmm); extern void uprobe_free_utask(struct task_struct *t); extern void uprobe_copy_process(struct task_struct *t); extern unsigned long __weak uprobe_get_swbp_addr(struct pt_regs *regs); +extern void __weak arch_uprobe_enable_step(struct arch_uprobe *arch); +extern void __weak arch_uprobe_disable_step(struct arch_uprobe *arch); extern int uprobe_post_sstep_notifier(struct pt_regs *regs); extern int uprobe_pre_sstep_notifier(struct pt_regs *regs); extern void uprobe_notify_resume(struct pt_regs *regs); extern bool uprobe_deny_signal(void); extern bool __weak arch_uprobe_skip_sstep(struct arch_uprobe *aup, struct pt_regs *regs); extern void uprobe_clear_state(struct mm_struct *mm); -extern void uprobe_reset_state(struct mm_struct *mm); #else /* !CONFIG_UPROBES */ struct uprobes_state { }; @@ -138,6 +140,10 @@ static inline void uprobe_munmap(struct vm_area_struct *vma, unsigned long start, unsigned long end) { } +static inline void +uprobe_dup_mmap(struct mm_struct *oldmm, struct mm_struct *newmm) +{ +} static inline void uprobe_notify_resume(struct pt_regs *regs) { } @@ -158,8 +164,5 @@ static inline void uprobe_copy_process(struct task_struct *t) static inline void uprobe_clear_state(struct mm_struct *mm) { } -static inline void uprobe_reset_state(struct mm_struct *mm) -{ -} #endif /* !CONFIG_UPROBES */ #endif /* _LINUX_UPROBES_H */ diff --git a/include/linux/usb.h b/include/linux/usb.h index 30d1ae38eab1..07915a32fb9d 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -384,6 +384,13 @@ enum usb_device_removable { USB_DEVICE_FIXED, }; +enum usb_port_connect_type { + USB_PORT_CONNECT_TYPE_UNKNOWN = 0, + USB_PORT_CONNECT_TYPE_HOT_PLUG, + USB_PORT_CONNECT_TYPE_HARD_WIRED, + USB_PORT_NOT_USED, +}; + /* * USB 3.0 Link Power Management (LPM) parameters. * @@ -469,7 +476,6 @@ struct usb3_lpm_parameters { * access from userspace * @usbfs_dentry: usbfs dentry entry for the device * @maxchild: number of ports if hub - * @children: child devices - USB devices that are attached to this hub * @quirks: quirks of the whole device * @urbnum: number of URBs submitted for the whole device * @active_duration: total time device is not suspended @@ -543,7 +549,6 @@ struct usb_device { struct list_head filelist; int maxchild; - struct usb_device **children; u32 quirks; atomic_t urbnum; @@ -572,6 +577,19 @@ static inline struct usb_device *interface_to_usbdev(struct usb_interface *intf) extern struct usb_device *usb_get_dev(struct usb_device *dev); extern void usb_put_dev(struct usb_device *dev); +extern struct usb_device *usb_hub_find_child(struct usb_device *hdev, + int port1); + +/** + * usb_hub_for_each_child - iterate over all child devices on the hub + * @hdev: USB device belonging to the usb hub + * @port1: portnum associated with child device + * @child: child device pointer + */ +#define usb_hub_for_each_child(hdev, port1, child) \ + for (port1 = 1, child = usb_hub_find_child(hdev, port1); \ + port1 <= hdev->maxchild; \ + child = usb_hub_find_child(hdev, ++port1)) /* USB device locking */ #define usb_lock_device(udev) device_lock(&(udev)->dev) @@ -584,6 +602,16 @@ extern int usb_lock_device_for_reset(struct usb_device *udev, extern int usb_reset_device(struct usb_device *dev); extern void usb_queue_reset_device(struct usb_interface *dev); +#ifdef CONFIG_ACPI +extern int usb_acpi_set_power_state(struct usb_device *hdev, int index, + bool enable); +extern bool usb_acpi_power_manageable(struct usb_device *hdev, int index); +#else +static inline int usb_acpi_set_power_state(struct usb_device *hdev, int index, + bool enable) { return 0; } +static inline bool usb_acpi_power_manageable(struct usb_device *hdev, int index) + { return true; } +#endif /* USB autosuspend and autoresume */ #ifdef CONFIG_USB_SUSPEND diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h index b6c2863b2c94..7692dc69ccf7 100644 --- a/include/linux/usb/ch11.h +++ b/include/linux/usb/ch11.h @@ -236,8 +236,8 @@ struct usb_hub_descriptor { struct { __u8 bHubHdrDecLat; - __u16 wHubDelay; - __u16 DeviceRemovable; + __le16 wHubDelay; + __le16 DeviceRemovable; } __attribute__ ((packed)) ss; } u; } __attribute__ ((packed)); diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 9d8c3b634493..f8dda0621800 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -34,6 +34,8 @@ * the composite model the host can use both functions at the same time. */ +#include <linux/bcd.h> +#include <linux/version.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -46,6 +48,9 @@ */ #define USB_GADGET_DELAYED_STATUS 0x7fff /* Impossibly large value */ +/* big enough to hold our biggest descriptor */ +#define USB_COMP_EP0_BUFSIZ 1024 + struct usb_configuration; /** @@ -245,24 +250,31 @@ int usb_add_config(struct usb_composite_dev *, void usb_remove_config(struct usb_composite_dev *, struct usb_configuration *); +/* predefined index for usb_composite_driver */ +enum { + USB_GADGET_MANUFACTURER_IDX = 0, + USB_GADGET_PRODUCT_IDX, + USB_GADGET_SERIAL_IDX, + USB_GADGET_FIRST_AVAIL_IDX, +}; + /** * struct usb_composite_driver - groups configurations into a gadget * @name: For diagnostics, identifies the driver. - * @iProduct: Used as iProduct override if @dev->iProduct is not set. - * If NULL value of @name is taken. - * @iManufacturer: Used as iManufacturer override if @dev->iManufacturer is - * not set. If NULL a default "<system> <release> with <udc>" value - * will be used. - * @iSerialNumber: Used as iSerialNumber override if @dev->iSerialNumber is - * not set. * @dev: Template descriptor for the device, including default device * identifiers. - * @strings: tables of strings, keyed by identifiers assigned during bind() - * and language IDs provided in control requests + * @strings: tables of strings, keyed by identifiers assigned during @bind + * and language IDs provided in control requests. Note: The first entries + * are predefined. The first entry that may be used is + * USB_GADGET_FIRST_AVAIL_IDX * @max_speed: Highest speed the driver supports. * @needs_serial: set to 1 if the gadget needs userspace to provide * a serial number. If one is not provided, warning will be printed. - * @unbind: Reverses bind; called as a side effect of unregistering + * @bind: (REQUIRED) Used to allocate resources that are shared across the + * whole device, such as string IDs, and add its configurations using + * @usb_add_config(). This may fail by returning a negative errno + * value; it should return zero on successful initialization. + * @unbind: Reverses @bind; called as a side effect of unregistering * this driver. * @disconnect: optional driver disconnect method * @suspend: Notifies when the host stops sending USB traffic, @@ -271,9 +283,9 @@ void usb_remove_config(struct usb_composite_dev *, * before function notifications * * Devices default to reporting self powered operation. Devices which rely - * on bus powered operation should report this in their @bind() method. + * on bus powered operation should report this in their @bind method. * - * Before returning from bind, various fields in the template descriptor + * Before returning from @bind, various fields in the template descriptor * may be overridden. These include the idVendor/idProduct/bcdDevice values * normally to bind the appropriate host side driver, and the three strings * (iManufacturer, iProduct, iSerialNumber) normally used to provide user @@ -283,14 +295,12 @@ void usb_remove_config(struct usb_composite_dev *, */ struct usb_composite_driver { const char *name; - const char *iProduct; - const char *iManufacturer; - const char *iSerialNumber; const struct usb_device_descriptor *dev; struct usb_gadget_strings **strings; enum usb_device_speed max_speed; unsigned needs_serial:1; + int (*bind)(struct usb_composite_dev *cdev); int (*unbind)(struct usb_composite_dev *); void (*disconnect)(struct usb_composite_dev *); @@ -298,10 +308,10 @@ struct usb_composite_driver { /* global suspend hooks */ void (*suspend)(struct usb_composite_dev *); void (*resume)(struct usb_composite_dev *); + struct usb_gadget_driver gadget_driver; }; -extern int usb_composite_probe(struct usb_composite_driver *driver, - int (*bind)(struct usb_composite_dev *cdev)); +extern int usb_composite_probe(struct usb_composite_driver *driver); extern void usb_composite_unregister(struct usb_composite_driver *driver); extern void usb_composite_setup_continue(struct usb_composite_dev *cdev); @@ -310,7 +320,6 @@ extern void usb_composite_setup_continue(struct usb_composite_dev *cdev); * struct usb_composite_device - represents one composite usb gadget * @gadget: read-only, abstracts the gadget's usb peripheral controller * @req: used for control responses; buffer is pre-allocated - * @bufsiz: size of buffer pre-allocated in @req * @config: the currently active configuration * * One of these devices is allocated and initialized before the @@ -341,7 +350,6 @@ extern void usb_composite_setup_continue(struct usb_composite_dev *cdev); struct usb_composite_dev { struct usb_gadget *gadget; struct usb_request *req; - unsigned bufsiz; struct usb_configuration *config; @@ -352,9 +360,7 @@ struct usb_composite_dev { struct list_head configs; struct usb_composite_driver *driver; u8 next_string_id; - u8 manufacturer_override; - u8 product_override; - u8 serial_override; + char *def_manufacturer; /* the gadget driver won't enable the data pullup * while the deactivation count is nonzero. @@ -375,6 +381,53 @@ extern int usb_string_ids_tab(struct usb_composite_dev *c, struct usb_string *str); extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n); +/* + * Some systems will need runtime overrides for the product identifiers + * published in the device descriptor, either numbers or strings or both. + * String parameters are in UTF-8 (superset of ASCII's 7 bit characters). + */ +struct usb_composite_overwrite { + u16 idVendor; + u16 idProduct; + u16 bcdDevice; + char *serial_number; + char *manufacturer; + char *product; +}; +#define USB_GADGET_COMPOSITE_OPTIONS() \ + static struct usb_composite_overwrite coverwrite; \ + \ + module_param_named(idVendor, coverwrite.idVendor, ushort, S_IRUGO); \ + MODULE_PARM_DESC(idVendor, "USB Vendor ID"); \ + \ + module_param_named(idProduct, coverwrite.idProduct, ushort, S_IRUGO); \ + MODULE_PARM_DESC(idProduct, "USB Product ID"); \ + \ + module_param_named(bcdDevice, coverwrite.bcdDevice, ushort, S_IRUGO); \ + MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); \ + \ + module_param_named(iSerialNumber, coverwrite.serial_number, charp, \ + S_IRUGO); \ + MODULE_PARM_DESC(iSerialNumber, "SerialNumber string"); \ + \ + module_param_named(iManufacturer, coverwrite.manufacturer, charp, \ + S_IRUGO); \ + MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); \ + \ + module_param_named(iProduct, coverwrite.product, charp, S_IRUGO); \ + MODULE_PARM_DESC(iProduct, "USB Product string") + +void usb_composite_overwrite_options(struct usb_composite_dev *cdev, + struct usb_composite_overwrite *covr); + +static inline u16 get_default_bcdDevice(void) +{ + u16 bcdDevice; + + bcdDevice = bin2bcd((LINUX_VERSION_CODE >> 16 & 0xff)) << 8; + bcdDevice |= bin2bcd((LINUX_VERSION_CODE >> 8 & 0xff)); + return bcdDevice; +} /* messaging utils */ #define DBG(d, fmt, args...) \ diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h index de4b9ed5d5dd..daec99af5d54 100644 --- a/include/linux/usb/ehci_def.h +++ b/include/linux/usb/ehci_def.h @@ -171,18 +171,18 @@ struct ehci_regs { #define USBMODE_CM_HC (3<<0) /* host controller mode */ #define USBMODE_CM_IDLE (0<<0) /* idle state */ - u32 reserved4[7]; + u32 reserved4[6]; /* Moorestown has some non-standard registers, partially due to the fact that * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to * PORTSCx */ /* HOSTPC: offset 0x84 */ - u32 hostpc[0]; /* HOSTPC extension */ + u32 hostpc[1]; /* HOSTPC extension */ #define HOSTPC_PHCD (1<<22) /* Phy clock disable */ #define HOSTPC_PSPD (3<<25) /* Port speed detection */ - u32 reserved5[17]; + u32 reserved5[16]; /* USBMODE_EX: offset 0xc8 */ u32 usbmode_ex; /* USB Device mode extension */ @@ -221,18 +221,35 @@ extern int __init early_dbgp_init(char *s); extern struct console early_dbgp_console; #endif /* CONFIG_EARLY_PRINTK_DBGP */ +struct usb_hcd; + +#ifdef CONFIG_XEN_DOM0 +extern int xen_dbgp_reset_prep(struct usb_hcd *); +extern int xen_dbgp_external_startup(struct usb_hcd *); +#else +static inline int xen_dbgp_reset_prep(struct usb_hcd *hcd) +{ + return 1; /* Shouldn't this be 0? */ +} + +static inline int xen_dbgp_external_startup(struct usb_hcd *hcd) +{ + return -1; +} +#endif + #ifdef CONFIG_EARLY_PRINTK_DBGP /* Call backs from ehci host driver to ehci debug driver */ -extern int dbgp_external_startup(void); -extern int dbgp_reset_prep(void); +extern int dbgp_external_startup(struct usb_hcd *); +extern int dbgp_reset_prep(struct usb_hcd *hcd); #else -static inline int dbgp_reset_prep(void) +static inline int dbgp_reset_prep(struct usb_hcd *hcd) { - return 1; + return xen_dbgp_reset_prep(hcd); } -static inline int dbgp_external_startup(void) +static inline int dbgp_external_startup(struct usb_hcd *hcd) { - return -1; + return xen_dbgp_external_startup(hcd); } #endif diff --git a/include/linux/usb/ehci_pdriver.h b/include/linux/usb/ehci_pdriver.h index 1894f42fe3f7..c9d09f8b7ff2 100644 --- a/include/linux/usb/ehci_pdriver.h +++ b/include/linux/usb/ehci_pdriver.h @@ -41,6 +41,14 @@ struct usb_ehci_pdata { unsigned big_endian_mmio:1; unsigned port_power_on:1; unsigned port_power_off:1; + + /* Turn on all power and clocks */ + int (*power_on)(struct platform_device *pdev); + /* Turn off all power and clocks */ + void (*power_off)(struct platform_device *pdev); + /* Turn on only VBUS suspend power and hotplug detection, + * turn off everything else */ + void (*power_suspend)(struct platform_device *pdev); }; #endif /* __USB_CORE_EHCI_PDRIVER_H */ diff --git a/include/linux/usb/ezusb.h b/include/linux/usb/ezusb.h new file mode 100644 index 000000000000..fc618d8d1e92 --- /dev/null +++ b/include/linux/usb/ezusb.h @@ -0,0 +1,16 @@ +#ifndef __EZUSB_H +#define __EZUSB_H + + +extern int ezusb_writememory(struct usb_device *dev, int address, + unsigned char *data, int length, __u8 bRequest); + +extern int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit); +extern int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit); + +extern int ezusb_fx1_ihex_firmware_download(struct usb_device *dev, + const char *firmware_path); +extern int ezusb_fx2_ihex_firmware_download(struct usb_device *dev, + const char *firmware_path); + +#endif /* __EZUSB_H */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 9517466ababb..5b6e50888248 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -474,7 +474,8 @@ struct usb_gadget_ops { /* Those two are deprecated */ int (*start)(struct usb_gadget_driver *, - int (*bind)(struct usb_gadget *)); + int (*bind)(struct usb_gadget *, + struct usb_gadget_driver *driver)); int (*stop)(struct usb_gadget_driver *); }; @@ -502,6 +503,8 @@ struct usb_gadget_ops { * @name: Identifies the controller hardware type. Used in diagnostics * and sometimes configuration. * @dev: Driver model state for this abstract device. + * @out_epnum: last used out ep number + * @in_epnum: last used in ep number * * Gadgets have a mostly-portable "gadget driver" implementing device * functions, handling all usb configurations and interfaces. Gadget @@ -536,6 +539,8 @@ struct usb_gadget { unsigned a_alt_hnp_support:1; const char *name; struct device dev; + unsigned out_epnum; + unsigned in_epnum; }; static inline void set_gadget_data(struct usb_gadget *gadget, void *data) @@ -558,14 +563,7 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev) */ static inline int gadget_is_dualspeed(struct usb_gadget *g) { -#ifdef CONFIG_USB_GADGET_DUALSPEED - /* runtime test would check "g->max_speed" ... that might be - * useful to work around hardware bugs, but is mostly pointless - */ - return 1; -#else - return 0; -#endif + return g->max_speed >= USB_SPEED_HIGH; } /** @@ -575,15 +573,7 @@ static inline int gadget_is_dualspeed(struct usb_gadget *g) */ static inline int gadget_is_superspeed(struct usb_gadget *g) { -#ifdef CONFIG_USB_GADGET_SUPERSPEED - /* - * runtime test would check "g->max_speed" ... that might be - * useful to work around hardware bugs, but is mostly pointless - */ - return 1; -#else - return 0; -#endif + return g->max_speed >= USB_SPEED_SUPER; } /** @@ -781,6 +771,7 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget) * when the host is disconnected. May be called in_interrupt; this * may not sleep. Some devices can't detect disconnect, so this might * not be called except as part of controller shutdown. + * @bind: the driver's bind callback * @unbind: Invoked when the driver is unbound from a gadget, * usually from rmmod (after a disconnect is reported). * Called in a context that permits sleeping. @@ -835,6 +826,8 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget) struct usb_gadget_driver { char *function; enum usb_device_speed max_speed; + int (*bind)(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); void (*unbind)(struct usb_gadget *); int (*setup)(struct usb_gadget *, const struct usb_ctrlrequest *); @@ -860,7 +853,6 @@ struct usb_gadget_driver { /** * usb_gadget_probe_driver - probe a gadget driver * @driver: the driver being registered - * @bind: the driver's bind callback * Context: can sleep * * Call this in your gadget driver's module initialization function, @@ -869,8 +861,7 @@ struct usb_gadget_driver { * registration call returns. It's expected that the @bind() function will * be in init sections. */ -int usb_gadget_probe_driver(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); +int usb_gadget_probe_driver(struct usb_gadget_driver *driver); /** * usb_gadget_unregister_driver - unregister a gadget driver diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index c5fdb148fc02..608050b2545f 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -135,8 +135,8 @@ struct usb_hcd { unsigned int irq; /* irq allocated */ void __iomem *regs; /* device memory/io */ - u64 rsrc_start; /* memory/io resource start */ - u64 rsrc_len; /* memory/io resource length */ + resource_size_t rsrc_start; /* memory/io resource start */ + resource_size_t rsrc_len; /* memory/io resource length */ unsigned power_budget; /* in mA, 0 = no limit */ /* bandwidth_mutex should be taken before adding or removing diff --git a/include/linux/usb/nop-usb-xceiv.h b/include/linux/usb/nop-usb-xceiv.h new file mode 100644 index 000000000000..28884c717411 --- /dev/null +++ b/include/linux/usb/nop-usb-xceiv.h @@ -0,0 +1,24 @@ +#ifndef __LINUX_USB_NOP_XCEIV_H +#define __LINUX_USB_NOP_XCEIV_H + +#include <linux/usb/otg.h> + +struct nop_usb_xceiv_platform_data { + enum usb_phy_type type; +}; + +#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) +/* sometimes transceivers are accessed only through e.g. ULPI */ +extern void usb_nop_xceiv_register(void); +extern void usb_nop_xceiv_unregister(void); +#else +static inline void usb_nop_xceiv_register(void) +{ +} + +static inline void usb_nop_xceiv_unregister(void) +{ +} +#endif + +#endif /* __LINUX_USB_NOP_XCEIV_H */ diff --git a/include/linux/usb/ohci_pdriver.h b/include/linux/usb/ohci_pdriver.h index 2808f2a9cce8..74e7755168b7 100644 --- a/include/linux/usb/ohci_pdriver.h +++ b/include/linux/usb/ohci_pdriver.h @@ -33,6 +33,14 @@ struct usb_ohci_pdata { unsigned big_endian_desc:1; unsigned big_endian_mmio:1; unsigned no_big_frame_no:1; + + /* Turn on all power and clocks */ + int (*power_on)(struct platform_device *pdev); + /* Turn off all power and clocks */ + void (*power_off)(struct platform_device *pdev); + /* Turn on only VBUS suspend power and hotplug detection, + * turn off everything else */ + void (*power_suspend)(struct platform_device *pdev); }; #endif /* __USB_CORE_OHCI_PDRIVER_H */ diff --git a/include/linux/usb/omap_usb.h b/include/linux/usb/omap_usb.h new file mode 100644 index 000000000000..0ea17f8ae820 --- /dev/null +++ b/include/linux/usb/omap_usb.h @@ -0,0 +1,46 @@ +/* + * omap_usb.h -- omap usb2 phy header file + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I <kishon@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __DRIVERS_OMAP_USB2_H +#define __DRIVERS_OMAP_USB2_H + +#include <linux/usb/otg.h> + +struct omap_usb { + struct usb_phy phy; + struct phy_companion *comparator; + struct device *dev; + u32 __iomem *control_dev; + struct clk *wkupclk; + u8 is_suspended:1; +}; + +#define PHY_PD 0x1 + +#define phy_to_omapusb(x) container_of((x), struct omap_usb, phy) + +#if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE) +extern int omap_usb2_set_comparator(struct phy_companion *comparator); +#else +static inline int omap_usb2_set_comparator(struct phy_companion *comparator) +{ + return -ENODEV; +} +#endif + +#endif /* __DRIVERS_OMAP_USB_H */ diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 45824be0a2f9..e8a5fe87c6bd 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -9,56 +9,7 @@ #ifndef __LINUX_USB_OTG_H #define __LINUX_USB_OTG_H -#include <linux/notifier.h> - -/* OTG defines lots of enumeration states before device reset */ -enum usb_otg_state { - OTG_STATE_UNDEFINED = 0, - - /* single-role peripheral, and dual-role default-b */ - OTG_STATE_B_IDLE, - OTG_STATE_B_SRP_INIT, - OTG_STATE_B_PERIPHERAL, - - /* extra dual-role default-b states */ - OTG_STATE_B_WAIT_ACON, - OTG_STATE_B_HOST, - - /* dual-role default-a */ - OTG_STATE_A_IDLE, - OTG_STATE_A_WAIT_VRISE, - OTG_STATE_A_WAIT_BCON, - OTG_STATE_A_HOST, - OTG_STATE_A_SUSPEND, - OTG_STATE_A_PERIPHERAL, - OTG_STATE_A_WAIT_VFALL, - OTG_STATE_A_VBUS_ERR, -}; - -enum usb_phy_events { - USB_EVENT_NONE, /* no events or cable disconnected */ - USB_EVENT_VBUS, /* vbus valid event */ - USB_EVENT_ID, /* id was grounded */ - USB_EVENT_CHARGER, /* usb dedicated charger */ - USB_EVENT_ENUMERATED, /* gadget driver enumerated */ -}; - -/* associate a type with PHY */ -enum usb_phy_type { - USB_PHY_TYPE_UNDEFINED, - USB_PHY_TYPE_USB2, - USB_PHY_TYPE_USB3, -}; - -struct usb_phy; - -/* for transceivers connected thru an ULPI interface, the user must - * provide access ops - */ -struct usb_phy_io_ops { - int (*read)(struct usb_phy *x, u32 reg); - int (*write)(struct usb_phy *x, u32 val, u32 reg); -}; +#include <linux/usb/phy.h> struct usb_otg { u8 default_a; @@ -85,134 +36,9 @@ struct usb_otg { }; -/* - * the otg driver needs to interact with both device side and host side - * usb controllers. it decides which controller is active at a given - * moment, using the transceiver, ID signal, HNP and sometimes static - * configuration information (including "board isn't wired for otg"). - */ -struct usb_phy { - struct device *dev; - const char *label; - unsigned int flags; - - enum usb_phy_type type; - enum usb_otg_state state; - enum usb_phy_events last_event; - - struct usb_otg *otg; - - struct device *io_dev; - struct usb_phy_io_ops *io_ops; - void __iomem *io_priv; - - /* for notification of usb_phy_events */ - struct atomic_notifier_head notifier; - - /* to pass extra port status to the root hub */ - u16 port_status; - u16 port_change; - - /* to support controllers that have multiple transceivers */ - struct list_head head; - - /* initialize/shutdown the OTG controller */ - int (*init)(struct usb_phy *x); - void (*shutdown)(struct usb_phy *x); - - /* effective for B devices, ignored for A-peripheral */ - int (*set_power)(struct usb_phy *x, - unsigned mA); - - /* for non-OTG B devices: set transceiver into suspend mode */ - int (*set_suspend)(struct usb_phy *x, - int suspend); - - /* notify phy connect status change */ - int (*notify_connect)(struct usb_phy *x, int port); - int (*notify_disconnect)(struct usb_phy *x, int port); -}; - - -/* for board-specific init logic */ -extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type); -extern void usb_remove_phy(struct usb_phy *); - -#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) -/* sometimes transceivers are accessed only through e.g. ULPI */ -extern void usb_nop_xceiv_register(void); -extern void usb_nop_xceiv_unregister(void); -#else -static inline void usb_nop_xceiv_register(void) -{ -} - -static inline void usb_nop_xceiv_unregister(void) -{ -} -#endif - -/* helpers for direct access thru low-level io interface */ -static inline int usb_phy_io_read(struct usb_phy *x, u32 reg) -{ - if (x->io_ops && x->io_ops->read) - return x->io_ops->read(x, reg); - - return -EINVAL; -} - -static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg) -{ - if (x->io_ops && x->io_ops->write) - return x->io_ops->write(x, val, reg); - - return -EINVAL; -} - -static inline int -usb_phy_init(struct usb_phy *x) -{ - if (x->init) - return x->init(x); - - return 0; -} - -static inline void -usb_phy_shutdown(struct usb_phy *x) -{ - if (x->shutdown) - x->shutdown(x); -} - -/* for usb host and peripheral controller drivers */ #ifdef CONFIG_USB_OTG_UTILS -extern struct usb_phy *usb_get_phy(enum usb_phy_type type); -extern struct usb_phy *devm_usb_get_phy(struct device *dev, - enum usb_phy_type type); -extern void usb_put_phy(struct usb_phy *); -extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x); extern const char *otg_state_string(enum usb_otg_state state); #else -static inline struct usb_phy *usb_get_phy(enum usb_phy_type type) -{ - return NULL; -} - -static inline struct usb_phy *devm_usb_get_phy(struct device *dev, - enum usb_phy_type type) -{ - return NULL; -} - -static inline void usb_put_phy(struct usb_phy *x) -{ -} - -static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x) -{ -} - static inline const char *otg_state_string(enum usb_otg_state state) { return NULL; @@ -262,42 +88,6 @@ otg_set_peripheral(struct usb_otg *otg, struct usb_gadget *periph) } static inline int -usb_phy_set_power(struct usb_phy *x, unsigned mA) -{ - if (x && x->set_power) - return x->set_power(x, mA); - return 0; -} - -/* Context: can sleep */ -static inline int -usb_phy_set_suspend(struct usb_phy *x, int suspend) -{ - if (x->set_suspend != NULL) - return x->set_suspend(x, suspend); - else - return 0; -} - -static inline int -usb_phy_notify_connect(struct usb_phy *x, int port) -{ - if (x->notify_connect) - return x->notify_connect(x, port); - else - return 0; -} - -static inline int -usb_phy_notify_disconnect(struct usb_phy *x, int port) -{ - if (x->notify_disconnect) - return x->notify_disconnect(x, port); - else - return 0; -} - -static inline int otg_start_srp(struct usb_otg *otg) { if (otg && otg->start_srp) @@ -306,31 +96,7 @@ otg_start_srp(struct usb_otg *otg) return -ENOTSUPP; } -/* notifiers */ -static inline int -usb_register_notifier(struct usb_phy *x, struct notifier_block *nb) -{ - return atomic_notifier_chain_register(&x->notifier, nb); -} - -static inline void -usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb) -{ - atomic_notifier_chain_unregister(&x->notifier, nb); -} - /* for OTG controller drivers (and maybe other stuff) */ extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num); -static inline const char *usb_phy_type_string(enum usb_phy_type type) -{ - switch (type) { - case USB_PHY_TYPE_USB2: - return "USB2 PHY"; - case USB_PHY_TYPE_USB3: - return "USB3 PHY"; - default: - return "UNKNOWN PHY TYPE"; - } -} #endif /* __LINUX_USB_OTG_H */ diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h new file mode 100644 index 000000000000..06b5bae35b29 --- /dev/null +++ b/include/linux/usb/phy.h @@ -0,0 +1,233 @@ +/* USB OTG (On The Go) defines */ +/* + * + * These APIs may be used between USB controllers. USB device drivers + * (for either host or peripheral roles) don't use these calls; they + * continue to use just usb_device and usb_gadget. + */ + +#ifndef __LINUX_USB_PHY_H +#define __LINUX_USB_PHY_H + +#include <linux/notifier.h> + +enum usb_phy_events { + USB_EVENT_NONE, /* no events or cable disconnected */ + USB_EVENT_VBUS, /* vbus valid event */ + USB_EVENT_ID, /* id was grounded */ + USB_EVENT_CHARGER, /* usb dedicated charger */ + USB_EVENT_ENUMERATED, /* gadget driver enumerated */ +}; + +/* associate a type with PHY */ +enum usb_phy_type { + USB_PHY_TYPE_UNDEFINED, + USB_PHY_TYPE_USB2, + USB_PHY_TYPE_USB3, +}; + +/* OTG defines lots of enumeration states before device reset */ +enum usb_otg_state { + OTG_STATE_UNDEFINED = 0, + + /* single-role peripheral, and dual-role default-b */ + OTG_STATE_B_IDLE, + OTG_STATE_B_SRP_INIT, + OTG_STATE_B_PERIPHERAL, + + /* extra dual-role default-b states */ + OTG_STATE_B_WAIT_ACON, + OTG_STATE_B_HOST, + + /* dual-role default-a */ + OTG_STATE_A_IDLE, + OTG_STATE_A_WAIT_VRISE, + OTG_STATE_A_WAIT_BCON, + OTG_STATE_A_HOST, + OTG_STATE_A_SUSPEND, + OTG_STATE_A_PERIPHERAL, + OTG_STATE_A_WAIT_VFALL, + OTG_STATE_A_VBUS_ERR, +}; + +struct usb_phy; +struct usb_otg; + +/* for transceivers connected thru an ULPI interface, the user must + * provide access ops + */ +struct usb_phy_io_ops { + int (*read)(struct usb_phy *x, u32 reg); + int (*write)(struct usb_phy *x, u32 val, u32 reg); +}; + +struct usb_phy { + struct device *dev; + const char *label; + unsigned int flags; + + enum usb_phy_type type; + enum usb_otg_state state; + enum usb_phy_events last_event; + + struct usb_otg *otg; + + struct device *io_dev; + struct usb_phy_io_ops *io_ops; + void __iomem *io_priv; + + /* for notification of usb_phy_events */ + struct atomic_notifier_head notifier; + + /* to pass extra port status to the root hub */ + u16 port_status; + u16 port_change; + + /* to support controllers that have multiple transceivers */ + struct list_head head; + + /* initialize/shutdown the OTG controller */ + int (*init)(struct usb_phy *x); + void (*shutdown)(struct usb_phy *x); + + /* effective for B devices, ignored for A-peripheral */ + int (*set_power)(struct usb_phy *x, + unsigned mA); + + /* for non-OTG B devices: set transceiver into suspend mode */ + int (*set_suspend)(struct usb_phy *x, + int suspend); + + /* notify phy connect status change */ + int (*notify_connect)(struct usb_phy *x, int port); + int (*notify_disconnect)(struct usb_phy *x, int port); +}; + + +/* for board-specific init logic */ +extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type); +extern void usb_remove_phy(struct usb_phy *); + +/* helpers for direct access thru low-level io interface */ +static inline int usb_phy_io_read(struct usb_phy *x, u32 reg) +{ + if (x->io_ops && x->io_ops->read) + return x->io_ops->read(x, reg); + + return -EINVAL; +} + +static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg) +{ + if (x->io_ops && x->io_ops->write) + return x->io_ops->write(x, val, reg); + + return -EINVAL; +} + +static inline int +usb_phy_init(struct usb_phy *x) +{ + if (x->init) + return x->init(x); + + return 0; +} + +static inline void +usb_phy_shutdown(struct usb_phy *x) +{ + if (x->shutdown) + x->shutdown(x); +} + +/* for usb host and peripheral controller drivers */ +#ifdef CONFIG_USB_OTG_UTILS +extern struct usb_phy *usb_get_phy(enum usb_phy_type type); +extern struct usb_phy *devm_usb_get_phy(struct device *dev, + enum usb_phy_type type); +extern void usb_put_phy(struct usb_phy *); +extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x); +#else +static inline struct usb_phy *usb_get_phy(enum usb_phy_type type) +{ + return NULL; +} + +static inline struct usb_phy *devm_usb_get_phy(struct device *dev, + enum usb_phy_type type) +{ + return NULL; +} + +static inline void usb_put_phy(struct usb_phy *x) +{ +} + +static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x) +{ +} + +#endif + +static inline int +usb_phy_set_power(struct usb_phy *x, unsigned mA) +{ + if (x && x->set_power) + return x->set_power(x, mA); + return 0; +} + +/* Context: can sleep */ +static inline int +usb_phy_set_suspend(struct usb_phy *x, int suspend) +{ + if (x->set_suspend != NULL) + return x->set_suspend(x, suspend); + else + return 0; +} + +static inline int +usb_phy_notify_connect(struct usb_phy *x, int port) +{ + if (x->notify_connect) + return x->notify_connect(x, port); + else + return 0; +} + +static inline int +usb_phy_notify_disconnect(struct usb_phy *x, int port) +{ + if (x->notify_disconnect) + return x->notify_disconnect(x, port); + else + return 0; +} + +/* notifiers */ +static inline int +usb_register_notifier(struct usb_phy *x, struct notifier_block *nb) +{ + return atomic_notifier_chain_register(&x->notifier, nb); +} + +static inline void +usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb) +{ + atomic_notifier_chain_unregister(&x->notifier, nb); +} + +static inline const char *usb_phy_type_string(enum usb_phy_type type) +{ + switch (type) { + case USB_PHY_TYPE_USB2: + return "USB2 PHY"; + case USB_PHY_TYPE_USB3: + return "USB3 PHY"; + default: + return "UNKNOWN PHY TYPE"; + } +} +#endif /* __LINUX_USB_PHY_H */ diff --git a/include/linux/usb/phy_companion.h b/include/linux/usb/phy_companion.h new file mode 100644 index 000000000000..edd2ec23d282 --- /dev/null +++ b/include/linux/usb/phy_companion.h @@ -0,0 +1,34 @@ +/* + * phy-companion.h -- phy companion to indicate the comparator part of PHY + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I <kishon@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __DRIVERS_PHY_COMPANION_H +#define __DRIVERS_PHY_COMPANION_H + +#include <linux/usb/otg.h> + +/* phy_companion to take care of VBUS, ID and srp capabilities */ +struct phy_companion { + + /* effective for A-peripheral, ignored for B devices */ + int (*set_vbus)(struct phy_companion *x, bool enabled); + + /* for B devices only: start session with A-Host */ + int (*start_srp)(struct phy_companion *x); +}; + +#endif /* __DRIVERS_PHY_COMPANION_H */ diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h index 3e93de7ecbc3..52f944dfe2fd 100644 --- a/include/linux/usb/quirks.h +++ b/include/linux/usb/quirks.h @@ -19,8 +19,8 @@ /* device can't handle its Configuration or Interface strings */ #define USB_QUIRK_CONFIG_INTF_STRINGS 0x00000008 -/*device will morph if reset, don't use reset for handling errors */ -#define USB_QUIRK_RESET_MORPHS 0x00000010 +/* device can't be reset(e.g morph devices), don't use reset */ +#define USB_QUIRK_RESET 0x00000010 /* device has more interface descriptions than the bNumInterfaces count, and can't handle talking to these interfaces */ diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 86c0b451745d..ef9be7e1e190 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -301,17 +301,13 @@ extern void usb_serial_port_softint(struct usb_serial_port *port); extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message); extern int usb_serial_resume(struct usb_interface *intf); -extern int ezusb_writememory(struct usb_serial *serial, int address, - unsigned char *data, int length, __u8 bRequest); -extern int ezusb_set_reset(struct usb_serial *serial, unsigned char reset_bit); - /* USB Serial console functions */ #ifdef CONFIG_USB_SERIAL_CONSOLE -extern void usb_serial_console_init(int debug, int minor); +extern void usb_serial_console_init(int minor); extern void usb_serial_console_exit(void); extern void usb_serial_console_disconnect(struct usb_serial *serial); #else -static inline void usb_serial_console_init(int debug, int minor) { } +static inline void usb_serial_console_init(int minor) { } static inline void usb_serial_console_exit(void) { } static inline void usb_serial_console_disconnect(struct usb_serial *serial) {} #endif @@ -333,7 +329,7 @@ extern void usb_serial_generic_throttle(struct tty_struct *tty); extern void usb_serial_generic_unthrottle(struct tty_struct *tty); extern void usb_serial_generic_disconnect(struct usb_serial *serial); extern void usb_serial_generic_release(struct usb_serial *serial); -extern int usb_serial_generic_register(int debug); +extern int usb_serial_generic_register(void); extern void usb_serial_generic_deregister(void); extern int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port, gfp_t mem_flags); @@ -355,30 +351,14 @@ extern struct usb_serial_driver usb_serial_generic_device; extern struct bus_type usb_serial_bus_type; extern struct tty_driver *usb_serial_tty_driver; -static inline void usb_serial_debug_data(int debug, - struct device *dev, +static inline void usb_serial_debug_data(struct device *dev, const char *function, int size, const unsigned char *data) { - int i; - - if (debug) { - dev_printk(KERN_DEBUG, dev, "%s - length = %d, data = ", - function, size); - for (i = 0; i < size; ++i) - printk("%.2x ", data[i]); - printk("\n"); - } + dev_dbg(dev, "%s - length = %d, data = %*ph\n", + function, size, size, data); } -/* Use our own dbg macro */ -#undef dbg -#define dbg(format, arg...) \ -do { \ - if (debug) \ - printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \ -} while (0) - /* * Macro for reporting errors in write path to avoid inifinite loop * when port is used as a console. diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h new file mode 100644 index 000000000000..176b1ca06ae4 --- /dev/null +++ b/include/linux/usb/tegra_usb_phy.h @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2010 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __TEGRA_USB_PHY_H +#define __TEGRA_USB_PHY_H + +#include <linux/clk.h> +#include <linux/usb/otg.h> + +struct tegra_utmip_config { + u8 hssync_start_delay; + u8 elastic_limit; + u8 idle_wait_delay; + u8 term_range_adj; + u8 xcvr_setup; + u8 xcvr_lsfslew; + u8 xcvr_lsrslew; +}; + +struct tegra_ulpi_config { + int reset_gpio; + const char *clk; +}; + +enum tegra_usb_phy_port_speed { + TEGRA_USB_PHY_PORT_SPEED_FULL = 0, + TEGRA_USB_PHY_PORT_SPEED_LOW, + TEGRA_USB_PHY_PORT_SPEED_HIGH, +}; + +enum tegra_usb_phy_mode { + TEGRA_USB_PHY_MODE_DEVICE, + TEGRA_USB_PHY_MODE_HOST, +}; + +struct tegra_xtal_freq; + +struct tegra_usb_phy { + int instance; + const struct tegra_xtal_freq *freq; + void __iomem *regs; + void __iomem *pad_regs; + struct clk *clk; + struct clk *pll_u; + struct clk *pad_clk; + enum tegra_usb_phy_mode mode; + void *config; + struct usb_phy *ulpi; + struct usb_phy u_phy; + struct device *dev; +}; + +struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance, + void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode); + +void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy); + +void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy); + +void tegra_usb_phy_preresume(struct tegra_usb_phy *phy); + +void tegra_usb_phy_postresume(struct tegra_usb_phy *phy); + +void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy, + enum tegra_usb_phy_port_speed port_speed); + +void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy); + +#endif /* __TEGRA_USB_PHY_H */ diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index e84e769aaddc..bf99cd01be20 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -72,33 +72,9 @@ enum { US_DO_ALL_FLAGS }; #undef US_FLAG -/* - * The bias field for libusual and friends. - */ -#define USB_US_TYPE_NONE 0 -#define USB_US_TYPE_STOR 1 /* usb-storage */ -#define USB_US_TYPE_UB 2 /* ub */ - -#define USB_US_TYPE(flags) (((flags) >> 24) & 0xFF) -#define USB_US_ORIG_FLAGS(flags) ((flags) & 0x00FFFFFF) - #include <linux/usb/storage.h> -/* - */ extern int usb_usual_ignore_device(struct usb_interface *intf); extern struct usb_device_id usb_storage_usb_ids[]; -#ifdef CONFIG_USB_LIBUSUAL - -extern void usb_usual_set_present(int type); -extern void usb_usual_clear_present(int type); -extern int usb_usual_check_type(const struct usb_device_id *, int type); -#else - -#define usb_usual_set_present(t) do { } while(0) -#define usb_usual_clear_present(t) do { } while(0) -#define usb_usual_check_type(id, t) (0) -#endif /* CONFIG_USB_LIBUSUAL */ - #endif /* __LINUX_USB_USUAL_H */ diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h index 3b74666be027..4abe28e41cbc 100644 --- a/include/linux/usbdevice_fs.h +++ b/include/linux/usbdevice_fs.h @@ -131,6 +131,19 @@ struct usbdevfs_hub_portinfo { #define USBDEVFS_CAP_NO_PACKET_SIZE_LIM 0x04 #define USBDEVFS_CAP_BULK_SCATTER_GATHER 0x08 +/* USBDEVFS_DISCONNECT_CLAIM flags & struct */ + +/* disconnect-and-claim if the driver matches the driver field */ +#define USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER 0x01 +/* disconnect-and-claim except when the driver matches the driver field */ +#define USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER 0x02 + +struct usbdevfs_disconnect_claim { + unsigned int interface; + unsigned int flags; + char driver[USBDEVFS_MAXDRIVERNAME + 1]; +}; + #ifdef __KERNEL__ #ifdef CONFIG_COMPAT #include <linux/compat.h> @@ -211,5 +224,6 @@ struct usbdevfs_ioctl32 { #define USBDEVFS_CLAIM_PORT _IOR('U', 24, unsigned int) #define USBDEVFS_RELEASE_PORT _IOR('U', 25, unsigned int) #define USBDEVFS_GET_CAPABILITIES _IOR('U', 26, __u32) +#define USBDEVFS_DISCONNECT_CLAIM _IOR('U', 27, struct usbdevfs_disconnect_claim) #endif /* _LINUX_USBDEVICE_FS_H */ diff --git a/include/linux/w1-gpio.h b/include/linux/w1-gpio.h index 3adeff82212f..065e3ae79ab0 100644 --- a/include/linux/w1-gpio.h +++ b/include/linux/w1-gpio.h @@ -19,6 +19,7 @@ struct w1_gpio_platform_data { unsigned int pin; unsigned int is_open_drain:1; void (*enable_external_pullup)(int enable); + unsigned int ext_pullup_enable_pin; }; #endif /* _LINUX_W1_GPIO_H */ diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h index 22e61fdf75a2..28e493b5b94c 100644 --- a/include/linux/xfrm.h +++ b/include/linux/xfrm.h @@ -84,6 +84,8 @@ struct xfrm_replay_state { __u32 bitmap; }; +#define XFRMA_REPLAY_ESN_MAX 4096 + struct xfrm_replay_state_esn { unsigned int bmp_len; __u32 oseq; diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h index 0fedbd8d747a..9fc7114159e8 100644 --- a/include/net/ip6_fib.h +++ b/include/net/ip6_fib.h @@ -111,9 +111,8 @@ struct rt6_info { struct inet6_dev *rt6i_idev; unsigned long _rt6i_peer; -#ifdef CONFIG_XFRM - u32 rt6i_flow_cache_genid; -#endif + u32 rt6i_genid; + /* more non-fragment space at head required */ unsigned short rt6i_nfheader_len; diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index ae1cd6c9ba52..fd87963a0ea5 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -102,6 +102,7 @@ struct net { #endif struct netns_ipvs *ipvs; struct sock *diag_nlsk; + atomic_t rt_genid; }; @@ -300,5 +301,14 @@ static inline void unregister_net_sysctl_table(struct ctl_table_header *header) } #endif +static inline int rt_genid(struct net *net) +{ + return atomic_read(&net->rt_genid); +} + +static inline void rt_genid_bump(struct net *net) +{ + atomic_inc(&net->rt_genid); +} #endif /* __NET_NET_NAMESPACE_H */ diff --git a/include/net/netns/ipv4.h b/include/net/netns/ipv4.h index 1474dd65c66f..eb24dbccd81e 100644 --- a/include/net/netns/ipv4.h +++ b/include/net/netns/ipv4.h @@ -65,7 +65,6 @@ struct netns_ipv4 { unsigned int sysctl_ping_group_range[2]; long sysctl_tcp_mem[3]; - atomic_t rt_genid; atomic_t dev_addr_genid; #ifdef CONFIG_IP_MROUTE diff --git a/include/net/route.h b/include/net/route.h index 776a27f1ab78..da22243d2760 100644 --- a/include/net/route.h +++ b/include/net/route.h @@ -108,7 +108,7 @@ extern struct ip_rt_acct __percpu *ip_rt_acct; struct in_device; extern int ip_rt_init(void); -extern void rt_cache_flush(struct net *net, int how); +extern void rt_cache_flush(struct net *net); extern void rt_flush_dev(struct net_device *dev); extern struct rtable *__ip_route_output_key(struct net *, struct flowi4 *flp); extern struct rtable *ip_route_output_flow(struct net *, struct flowi4 *flp, diff --git a/include/net/sock.h b/include/net/sock.h index 72132aef53fc..adb7da20b5a1 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1332,7 +1332,7 @@ static inline bool sk_wmem_schedule(struct sock *sk, int size) } static inline bool -sk_rmem_schedule(struct sock *sk, struct sk_buff *skb, unsigned int size) +sk_rmem_schedule(struct sock *sk, struct sk_buff *skb, int size) { if (!sk_has_account(sk)) return true; diff --git a/include/trace/define_trace.h b/include/trace/define_trace.h index b0b4eb24d592..1905ca8dd399 100644 --- a/include/trace/define_trace.h +++ b/include/trace/define_trace.h @@ -1,5 +1,5 @@ /* - * Trace files that want to automate creationg of all tracepoints defined + * Trace files that want to automate creation of all tracepoints defined * in their file should include this file. The following are macros that the * trace file may define: * diff --git a/include/trace/events/kmem.h b/include/trace/events/kmem.h index 5f889f16b0c8..08fa27244da7 100644 --- a/include/trace/events/kmem.h +++ b/include/trace/events/kmem.h @@ -214,7 +214,7 @@ TRACE_EVENT(mm_page_alloc, TP_printk("page=%p pfn=%lu order=%d migratetype=%d gfp_flags=%s", __entry->page, - page_to_pfn(__entry->page), + __entry->page ? page_to_pfn(__entry->page) : 0, __entry->order, __entry->migratetype, show_gfp_flags(__entry->gfp_flags)) @@ -240,7 +240,7 @@ DECLARE_EVENT_CLASS(mm_page, TP_printk("page=%p pfn=%lu order=%u migratetype=%d percpu_refill=%d", __entry->page, - page_to_pfn(__entry->page), + __entry->page ? page_to_pfn(__entry->page) : 0, __entry->order, __entry->migratetype, __entry->order == 0) diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h index 11e27c3af3cb..f19fff8650e9 100644 --- a/include/xen/grant_table.h +++ b/include/xen/grant_table.h @@ -187,6 +187,7 @@ int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops, struct gnttab_map_grant_ref *kmap_ops, struct page **pages, unsigned int count); int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops, - struct page **pages, unsigned int count, bool clear_pte); + struct gnttab_map_grant_ref *kunmap_ops, + struct page **pages, unsigned int count); #endif /* __ASM_GNTTAB_H__ */ diff --git a/include/xen/interface/physdev.h b/include/xen/interface/physdev.h index 9ce788d8cf49..bfa1d50fe15b 100644 --- a/include/xen/interface/physdev.h +++ b/include/xen/interface/physdev.h @@ -258,6 +258,22 @@ struct physdev_pci_device { uint8_t devfn; }; +#define PHYSDEVOP_DBGP_RESET_PREPARE 1 +#define PHYSDEVOP_DBGP_RESET_DONE 2 + +#define PHYSDEVOP_DBGP_BUS_UNKNOWN 0 +#define PHYSDEVOP_DBGP_BUS_PCI 1 + +#define PHYSDEVOP_dbgp_op 29 +struct physdev_dbgp_op { + /* IN */ + uint8_t op; + uint8_t bus; + union { + struct physdev_pci_device pci; + } u; +}; + /* * Notify that some PIRQ-bound event channels have been unmasked. * ** This command is obsolete since interface version 0x00030202 and is ** |