aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-04-28ipv4: Get route daddr from flow key in dccp_v4_connect().David S. Miller
Now that output route lookups update the flow with destination address selection, we can fetch it from fl4->daddr instead of rt->rt_dst Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28ipv4: Fetch route saddr from flow key in l2tp_ip_connect().David S. Miller
Now that output route lookups update the flow with source address selection, we can fetch it from fl4->saddr instead of rt->rt_src Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28ipv4: Fetch route saddr from flow key in tcp_v4_connect().David S. Miller
Now that output route lookups update the flow with source address selection, we can fetch it from fl4->saddr instead of rt->rt_src Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28ipv4: Fetch route saddr from flow key in ip4_datagram_connect().David S. Miller
Now that output route lookups update the flow with source address selection, we can fetch it from fl4->saddr instead of rt->rt_src Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28ipv4: Fetch route saddr from flow key in inet_sk_reselect_saddr().David S. Miller
Now that output route lookups update the flow with source address selection, we can fetch it from fl4->saddr instead of rt->rt_src Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28ipv4: Remove now superfluous code in ip_route_connect().David S. Miller
Now that output route lookups update the flow with source address et al. selections, the fl4->{saddr,daddr} assignments here are no longer necessary. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28ipv4: Use caller's on-stack flowi as-is in output route lookups.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28net: Use non-zero allocations in dst_alloc().David S. Miller
Make dst_alloc() and it's users explicitly initialize the entire entry. The zero'ing done by kmem_cache_zalloc() was almost entirely redundant. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28net: Make dst_alloc() take more explicit initializations.David S. Miller
Now the dst->dev, dev->obsolete, and dst->flags values can be specified as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28l2tp: Fix inet_opt conversion.David S. Miller
We don't actually hold the socket lock at this point, so the rcu_dereference_protected() isn't' correct. Thanks to Eric Dumazet for pointing this out. Thankfully, we're only interested in fetching the faddr value if srr is enabled, so we can simply make this an RCU sequence and use plain rcu_dereference(). Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28net: ibmveth: force reconfiguring checksum settings on startupMichał Mirosław
Commit b9367bf3ee6d ("net: ibmveth: convert to hw_features") accidentally removed call to ibmveth_set_csum_offload() in ibmveth_probe(). Put the call back where it was, but with additional error checking provided by ibmveth_set_features(). Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> [sfr: dev -> netdev] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28qlcnic: fix memory leak in qlcnic_blink_led.Sucheta Chakraborty
o Memory allocated in ETHTOOL_ACTIVE mode, is not getting freed. So, in ETHTOOL_ID_INACTIVE mode, return after freeing allocated memory. o Using set bit instead of blink_down field, as it is also required in internal Loopback test and etc. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28tg3: Convert u32 flag,flg2,flg3 uses to bitmapJoe Perches
Using a bitmap instead of separate u32 flags allows a consistent, simpler and more extensible mechanism to determine capabilities. Convert bitmasks to enum. Add tg3_flag, tg3_flag_clear and tg3_flag_set. Convert the flag & bitmask tests. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28net: allow user to change NETIF_F_HIGHDMAMichał Mirosław
NETIF_F_HIGHDMA is like any other TX offloads, so allow user to toggle it. This is needed later for bridge and bonding convertsion to hw_features. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28bridge: convert br_features_recompute() to ndo_fix_featuresMichał Mirosław
Note: netdev_update_features() needs only rtnl_lock as br->port_list is only changed while holding it. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28net: fix netdev_increment_features()Michał Mirosław
Simplify and fix netdev_increment_features() to conform to what is stated in netdevice.h comments about NETIF_F_ONE_FOR_ALL. Include FCoE segmentation and VLAN-challedged flags in computation. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28net:use help function of skb_checksum_start_offset to calculate offsetShan Wei
Although these are equivalent, but the skb_checksum_start_offset() is more readable. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28inet: add RCU protection to inet->optEric Dumazet
We lack proper synchronization to manipulate inet->opt ip_options Problem is ip_make_skb() calls ip_setup_cork() and ip_setup_cork() possibly makes a copy of ipc->opt (struct ip_options), without any protection against another thread manipulating inet->opt. Another thread can change inet->opt pointer and free old one under us. Use RCU to protect inet->opt (changed to inet->inet_opt). Instead of handling atomic refcounts, just copy ip_options when necessary, to avoid cache line dirtying. We cant insert an rcu_head in struct ip_options since its included in skb->cb[], so this patch is large because I had to introduce a new ip_options_rcu structure. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-27net: filter: Just In Time compiler for x86-64Eric Dumazet
In order to speedup packet filtering, here is an implementation of a JIT compiler for x86_64 It is disabled by default, and must be enabled by the admin. echo 1 >/proc/sys/net/core/bpf_jit_enable It uses module_alloc() and module_free() to get memory in the 2GB text kernel range since we call helpers functions from the generated code. EAX : BPF A accumulator EBX : BPF X accumulator RDI : pointer to skb (first argument given to JIT function) RBP : frame pointer (even if CONFIG_FRAME_POINTER=n) r9d : skb->len - skb->data_len (headlen) r8 : skb->data To get a trace of generated code, use : echo 2 >/proc/sys/net/core/bpf_jit_enable Example of generated code : # tcpdump -p -n -s 0 -i eth1 host 192.168.20.0/24 flen=18 proglen=147 pass=3 image=ffffffffa00b5000 JIT code: ffffffffa00b5000: 55 48 89 e5 48 83 ec 60 48 89 5d f8 44 8b 4f 60 JIT code: ffffffffa00b5010: 44 2b 4f 64 4c 8b 87 b8 00 00 00 be 0c 00 00 00 JIT code: ffffffffa00b5020: e8 24 7b f7 e0 3d 00 08 00 00 75 28 be 1a 00 00 JIT code: ffffffffa00b5030: 00 e8 fe 7a f7 e0 24 00 3d 00 14 a8 c0 74 49 be JIT code: ffffffffa00b5040: 1e 00 00 00 e8 eb 7a f7 e0 24 00 3d 00 14 a8 c0 JIT code: ffffffffa00b5050: 74 36 eb 3b 3d 06 08 00 00 74 07 3d 35 80 00 00 JIT code: ffffffffa00b5060: 75 2d be 1c 00 00 00 e8 c8 7a f7 e0 24 00 3d 00 JIT code: ffffffffa00b5070: 14 a8 c0 74 13 be 26 00 00 00 e8 b5 7a f7 e0 24 JIT code: ffffffffa00b5080: 00 3d 00 14 a8 c0 75 07 b8 ff ff 00 00 eb 02 31 JIT code: ffffffffa00b5090: c0 c9 c3 BPF program is 144 bytes long, so native program is almost same size ;) (000) ldh [12] (001) jeq #0x800 jt 2 jf 8 (002) ld [26] (003) and #0xffffff00 (004) jeq #0xc0a81400 jt 16 jf 5 (005) ld [30] (006) and #0xffffff00 (007) jeq #0xc0a81400 jt 16 jf 17 (008) jeq #0x806 jt 10 jf 9 (009) jeq #0x8035 jt 10 jf 17 (010) ld [28] (011) and #0xffffff00 (012) jeq #0xc0a81400 jt 16 jf 13 (013) ld [38] (014) and #0xffffff00 (015) jeq #0xc0a81400 jt 16 jf 17 (016) ret #65535 (017) ret #0 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-27ipv4: Kill RTO_CONN.David S. Miller
It's not used by anything in the kernel, and defined in net/route.h so never exported to userspace. Therefore we can safely remove it. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-27ipv4: Remove erroneous check in igmpv3_newpack() and igmp_send_report().David S. Miller
Output route resolution never returns a route with rt_src set to zero (which is INADDR_ANY). Even if the flow key for the output route lookup specifies INADDR_ANY for the source address, the output route resolution chooses a real source address to use in the final route. This test has existed forever in igmp_send_report() and David Stevens simply copied over the erroneous test when implementing support for IGMPv3. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
2011-04-27ipv4: Sanitize and simplify ip_route_{connect,newports}()David S. Miller
These functions are used together as a unit for route resolution during connect(). They address the chicken-and-egg problem that exists when ports need to be allocated during connect() processing, yet such port allocations require addressing information from the routing code. It's currently more heavy handed than it needs to be, and in particular we allocate and initialize a flow object twice. Let the callers provide the on-stack flow object. That way we only need to initialize it once in the ip_route_connect() call. Later, if ip_route_newports() needs to do anything, it re-uses that flow object as-is except for the ports which it updates before the route re-lookup. Also, describe why this set of facilities are needed and how it works in a big comment. Signed-off-by: David S. Miller <davem@davemloft.net> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
2011-04-27r8169: fix merge conflict fix.Francois Romieu
- use adequate MAC_VER id (see 01dc7fec4025f6bb72b6b98ec88b375346b6dbbb) - remove duplicate rtl_firmware_info record - remove duplicate functions Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-27sctp: clean up route lookup callsVlad Yasevich
Change the call to take the transport parameter and set the cached 'dst' appropriately inside the get_dst() function calls. This will allow us in the future to clean up source address storage as well. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-27sctp: remove useless arguments from get_saddr() callVlad Yasevich
There is no point in passing a destination address to a get_saddr() call. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-27sctp: make sctp over IPv6 work with IPsecVlad Yasevich
SCTP never called xfrm_output after it's v6 route lookups so that never really worked with ipsec. Additioanlly, we never passed port nubmers and protocol in the flowi, so any port based policies were never applied as well. Now that we can fixed ipv6 routing lookup code, using ip6_dst_lookup_flow() and pass port numbers. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-27sctp: cache the ipv6 source after route lookupVlad Yasevich
The ipv6 routing lookup does give us a source address, but instead of filling it into the dst, it's stored in the flowi. We can use that instead of going through the entire source address selection again. Also the useless ->dst_saddr member of sctp_pf is removed. And sctp_v6_dst_saddr() is removed, instead by introduce sctp_v6_to_addr(), which can be reused to cleanup some dup code. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-27sctp: fix sctp to work with ipv6 source address routingWeixing Shi
In the below test case, using the source address routing, sctp can not work. Node-A 1)ifconfig eth0 inet6 add 2001:1::1/64 2)ip -6 rule add from 2001:1::1 table 100 pref 100 3)ip -6 route add 2001:2::1 dev eth0 table 100 4)sctp_darn -H 2001:1::1 -P 250 -l & Node-B 1)ifconfig eth0 inet6 add 2001:2::1/64 2)ip -6 rule add from 2001:2::1 table 100 pref 100 3)ip -6 route add 2001:1::1 dev eth0 table 100 4)sctp_darn -H 2001:2::1 -P 250 -h 2001:1::1 -p 250 -s root cause: Node-A and Node-B use the source address routing, and at begining, source address will be NULL,sctp will search the routing table by the destination address, because using the source address routing table, and the result dst_entry will be NULL. solution: walk through the bind address list to get the source address and then lookup the routing table again to get the correct dst_entry. Signed-off-by: Weixing Shi <Weixing.Shi@windriver.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-27ixgbe: convert to ethtool set_phys_idEmil Tantilov
Based on the original patch submitted by Stephen Hemminger. This patch makes the following changes: - Change ETHTOOL_ID_INACTIVE return value to 2 (blinks/sec) - Fix restoring of IXGBE_LEDCTL CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: fix X540 ethtool loopback test.Don Skidmore
On X540 we need to set the MACC.FLU bit to 1 in order to force the link up before entering MAC loopback. This is only used in the ethtool loopback test, which was failing. This patch corrects it. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: Bump versionDon Skidmore
Bump the driver version number to better match up with the out of tree driver that has similar functionality. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: enable SCTP checksum offload for X540Don Skidmore
X540 supports SCTP checksum offload so enable it. It was overlooked when X540 support was initially added to the driver. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: do not clear FCoE DDP error status for received ABTSYi Zou
The ddp->err is initialized to be 1 to make sure outstanding DDP context is guaranteed to be invalidated when HW is not auto-invalidating it. However, in case of receiving ABTS response for a DDPed I/O, the ddp->err was cleared, bypassing the invalidating of the DDP context from upper protocol stack when ixgbe_fcoe_ddp_put() is called. This bug is fixed here by updating the error only when FCP_RSP is received. Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: fix static functionsJohn Fastabend
Define functions as static added C=1 (sparse) to my make line brought these to my attention. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: remove ntuple display supportAlexander Duyck
This change removes the ntuple display support from ixgbe. The reason for this change is to resolve a number of issues in the way display filtering is handled. I plan to add support for displaying these filters via the network flow classifier interface. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: add LED blink code for x540Emil Tantilov
Implement blink_led_start and blink_led_stop functions for x540 using the MACC register. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: add support for 64k EEPROM for 82599Emil Tantilov
82599 supports up to 32k EEPROM addressing via EERD register. If we wish to address larger EEPROM this have to be done via serial interface. This patch adds function ixgbe_read_eeprom_82599 which selects the best method to read the EEPROM. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: register defines cleanupEmil Tantilov
Remove duplicates. Fix incorrect defines. Fix/Update comments. Fix whitespace. Add new register defines. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27ixgbe: explicitly disable 100H for x540Emil Tantilov
100H is not supported on this HW, but the bit is set on the PHY. This can result in link at 100F when advertising only 1000F. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27e1000e: implement ethtool set_phys_idBruce Allan
Based on a patch from Stephen Hemminger <shemminger@vyatta.com>. The new ethtool set_phys_id takes over controlling the LED for identifying boards. This fixes the lockout during that period. For this device lots of extra infrastructure can also be removed by using set_phys_id. v2: - return blink frequency for parts that do not support blink in h/w - add blink_led function pointers for devices that do support blink in h/w to cleanup the test for this functionality Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-26Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Resolved logic conflicts causing a build failure due to drivers/net/r8169.c changes using a patch from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26tg3: Update version to 3.118Matt Carlson
This patch updates the tg3 version to 3.118. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26tg3: Whitespace cleanupsMatt Carlson
This patch gets rid of some harmless whitespace errors. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26tg3: Add EEH supportMatt Carlson
This patch adds EEH support to the tg3 driver. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26tg3: Add TSO loopback testMatt Carlson
This patch adds code to exercise the TSO portion of the device through a phy loopback test. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26tg3: Organize loopback test failure flagsMatt Carlson
As more test modes are added to each loopback mode, the need to organise the results increases. This patch groups the results by loopback mode, and then by test mode. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26tg3: Fix int generation hw bug for 5719 / 5720Matt Carlson
On the 5719 and 5720, there is a bug where the hardware will misinterpret a status tag update and leave interrupts permanently disabled. This patch enables a hardware fix that works around the issue. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-25bluetooth: Fix use-before-initiailized var.David S. Miller
net/bluetooth/l2cap_core.c: In function ‘l2cap_recv_frame’: net/bluetooth/l2cap_core.c:3612:15: warning: ‘sk’ may be used uninitialized in this function net/bluetooth/l2cap_core.c:3612:15: note: ‘sk’ was declared here Actually the problem is in the inline function l2cap_data_channel(), we branch to the label 'done' which tests 'sk' before we set it to anything. Initialize it to NULL to fix this. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-25Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-04-25be2net: Fixed a bug in be_cmd_get_regs().Somnath Kotur
Same WRB entry was being reused over different iterations of a loop while issuing non-embedded IOCTL requests.Fixed couple of minor bugs in this path as well. Re-factored code to alloc/free memory for DMA outside of loop Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-17 17:58:51 +0000