| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Conflicts:
arch/tile/Kconfig
arch/x86/Kconfig
|
|
Basic support for the single socket Broadwell-DE processor
was added back in commit 1f39581a9a7a
sb_edac: Add support for Broadwell-DE processor
This patch extends Broadwell support to cover the two
socket "-EP" and four socket "-EX" versions of Broadwell.
Only tested on the 2 socket - but this code is largely
cloned from the Haswell path.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
First noticed a problem on a 4 socket machine where EDAC only reported
half the DIMMS. Tracked this down to the code that assumes that systems
with two home agents only have two memory channels on each agent. This
is true on 2 sockect ("-EP") machines. But four socket ("-EX") machines
have four memory channels on each home agent.
The old code would have had problems on two socket systems as it did
a shuffling trick to make the internals of the code think that the
channels from the first agent were '0' and '1', with the second agent
providing '2' and '3'. But the code didn't uniformly convert from
{ha,channel} tuples to this internal representation.
New code always considers up to eight channels.
On a machine with a single home agent these map easily to edac channels
0, 1, 2, 3. On machines with two home agents we map using:
edac_channel = 4*ha# + channel
So on a -EP machine where each home agent supports only two channels
we'll fill in channels 0, 1, 4, 5, and on a -EX machine we use all of 0,
1, 2, 3, 4, 5, 6, 7.
[mchehab@osg.samsung.com: fold a fixup patch as per Tony's request and fixed
a few CodingStyle issues]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
typo: "a7mode" chooses whether to use bits {8, 7, 9} or {8, 7, 6}
in the algorithm to spread access between memory resources. But
the non-a7mode path was incorrectly using GET_BITFIELD(addr, 7, 9)
and so picking bits {9, 8, 7}
thinko: BIT(1) of the dram_rule registers chooses whether to just
use the {8, 7, 6} (or {8, 7, 9}) bits mentioned above as they are,
or to XOR them with bits {18, 17, 16} but the code inverted the
test. We need the additional XOR when dram_rule{1} == 0.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Currently set to "6", but the reset of the code will dynamically
allocate as needed. We need to go to "8" today, but drop the check
completely to save doing this again when we need even larger numbers.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The new x-gene EDAC driver incorrectly tried to figure out the version
of one of its IP blocks by looking at the version of the CPU core, which
is only vagely related.
This removes the incorrect code and instead uses the version of the IP
block in the compatible string where it belongs.
Found using build testing on x86, which does not provide the arm64
cpuid interface.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ Changed subnode to "apm,xgene-edac-pmd-v2", adjusted check. ]
Signed-off-by: Loc Ho <lho@apm.com>
Cc: devicetree@vger.kernel.org
Cc: dougthompson@xmission.com
Cc: ijc+devicetree@hellion.org.uk
Cc: jcm@redhat.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mark.rutland@arm.com
Cc: mchehab@osg.samsung.com
Cc: patches@apm.com
Cc: robh+dt@kernel.org
Link: http://lkml.kernel.org/r/3195065.IK73o60xya@wuerfel
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Extend err_addr to cover 64 bits for DDR errors.
Signed-off-by: York Sun <yorksun@freescale.com>
Acked-by: Johannes Thumshirn <morbidrsa@gmail.com>
Cc: Mingkai.hu@freescale.com
Link: http://lkml.kernel.org/r/1431425022-44766-2-git-send-email-Wenbin.Song@freescale.com
Signed-off-by: songwenbin <wenbin.song@freescale.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Remove mpc83xx and mpc85xx as dependency.
Signed-off-by: York Sun <yorksun@freescale.com>
Acked-by: Johannes Thumshirn <morbidrsa@gmail.com>
Cc: Mingkai.hu@freescale.com
Link: http://lkml.kernel.org/r/1431425022-44766-1-git-send-email-Wenbin.Song@freescale.com
Signed-off-by: songwenbin <wenbin.song@freescale.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
<asm/edac.h> contains only the arch-specific scrubbing function and is
thus not needed in edac_stub.c. Kill it.
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Add support for the APM X-Gene SoC EDAC driver.
Signed-off-by: Loc Ho <lho@apm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: devicetree@vger.kernel.org
Cc: dougthompson@xmission.com
Cc: ijc+devicetree@hellion.org.uk
Cc: jcm@redhat.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mark.rutland@arm.com
Cc: mchehab@osg.samsung.com
Cc: patches@apm.com
Cc: robh+dt@kernel.org
Link: http://lkml.kernel.org/r/1432337580-3750-5-git-send-email-lho@apm.com
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
So first of all, this atomic_scrub() function's naming is bad. It looks
like an atomic_t helper. Change it to edac_atomic_scrub().
The bigger problem is that this function is arch-specific and every new
arch which doesn't necessarily need that functionality still needs to
define it, otherwise EDAC doesn't compile.
So instead of doing that and including arch-specific headers, have each
arch define an EDAC_ATOMIC_SCRUB symbol which can be used in edac_mc.c
for ifdeffery. Much cleaner.
And we already are doing this with another symbol - EDAC_SUPPORT. This
is also much cleaner than having CONFIG_EDAC enumerate all the arches
which need/have EDAC support and drivers.
This way I can kill the useless edac.h header in tile too.
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Chris Metcalf <cmetcalf@ezchip.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: "Maciej W. Rozycki" <macro@codesourcery.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Steven J. Hill" <Steven.Hill@imgtec.com>
Cc: x86@kernel.org
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
While testing asynchronous PCI probe on this driver I noticed it failed
because the driver checks if any of the PCI devices have been bound to
the driver after registering it, which obviously does not work if
probing is asynchronous.
While there are patches and discussions on how the driver should behave
are ongoing, let's enforce synchronous probe for this driver for now.
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The SDRAM EDAC requires SDRAM configuration/initialization before SDRAM
is accessed (in the preloader) and therefore before Linux is loaded.
Having a module compile is not desired so force to be built into kernel.
Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Cc: mchehab@osg.samsung.com
Cc: Takashi Iwai <tiwai@suse.de>
Link: http://lkml.kernel.org/r/1429308974-26380-3-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
of_device_id is always used as const. See driver.of_match_table and open
firmware functions.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Robert Richter <rric@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Johannes Thumshirn <johannes.thumshirn@men.de>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
Cc: linux-edac@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1426535685-25996-10-git-send-email-fabf@skynet.be
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
type T;
identifier f;
@@
static T f (...) { ... }
@@
identifier r.f;
declarer name EXPORT_SYMBOL_GPL;
@@
-EXPORT_SYMBOL_GPL(f);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Tim Small <tim@buttersideup.com>
Link: http://lkml.kernel.org/r/1426092997-30605-13-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
... and do the proper thing using EDAC core facilities.
Cc: Daniel J Blueman <daniel@numascale.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
edac_init() does not deallocate already allocated resources on failure
path.
Found by Linux Driver Verification project (linuxtesting.org).
[ Boris: The unwind path functions have __exit annotation but are being
used in an __init function, leading to section mismatches. Drop the
section annotation and make them normal functions. ]
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Link: http://lkml.kernel.org/r/1423203162-26368-1-git-send-email-khoroshilov@ispras.ru
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
... instead of manual device_create_file() and device_remove_file()
calls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: http://lkml.kernel.org/r/1423046938-18111-9-git-send-email-tiwai@suse.de
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
... instead of manual device_create_file() and device_remove_file()
calls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: http://lkml.kernel.org/r/1423046938-18111-8-git-send-email-tiwai@suse.de
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
... instead of manual device_create_file() and device_remove_file()
calls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Johannes Thumshirn <johannes.thumshirn@men.de>
Link: http://lkml.kernel.org/r/1423046938-18111-7-git-send-email-tiwai@suse.de
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
... instead of manual device_create_file() and device_remove_file()
calls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[ Add NULL terminator to i7core_dev_attrs[] caught by the build robot. ]
Reported-by: Huang Ying <ying.huang@intel.com>
Link: http://lkml.kernel.org/r/1423046938-18111-6-git-send-email-tiwai@suse.de
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
... instead of possibly uninitialized return value.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: http://lkml.kernel.org/r/1423046938-18111-5-git-send-email-tiwai@suse.de
[ Add a commit message, albeit a small one. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Instead of calling device_create_file() and device_remove_file()
manually, pass the static attribute groups with the new
edac_mc_add_mc_with_groups(). The conditional creation of inject sysfs
files is done by a proper is_visible callback.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: http://lkml.kernel.org/r/1423046938-18111-4-git-send-email-tiwai@suse.de
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Add edac_mc_add_mc_with_groups() for initializing the mem_ctl_info
object with the optional attribute groups. This allows drivers to
pass additional sysfs entries without manual (and racy)
device_create_file() and co calls.
edac_mc_add_mc() is kept as is, just calling edac_mc_add_with_groups()
with NULL groups.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: http://lkml.kernel.org/r/1423046938-18111-3-git-send-email-tiwai@suse.de
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Instead of manual calls of device_create_file() and
device_remove_file(), use static attribute groups with proper
is_visible callbacks for managing the sysfs entries.
This simplifies the code a lot and avoids the possible races.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: http://lkml.kernel.org/r/1423046938-18111-2-git-send-email-tiwai@suse.de
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
The pci_dev_put() function tests whether its argument is NULL and thus
the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: http://lkml.kernel.org/r/54CFC12C.9010002@users.sourceforge.net
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull two EDAC fixes from Borislav Petkov:
- A fix to sb_edac for proper detection on SNB machines
- A fix to amd64_edac to not explode on Numascale machines with more
than 16 memory controllers, from Daniel J Blueman.
* tag 'edac_fixes_for_3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, amd64_edac: Prevent OOPS with >16 memory controllers
sb_edac: Fix detection on SNB machines
|
|
When DRAM errors occur on memory controllers after EDAC_MAX_MCS (16),
the kernel fatally dereferences unallocated structures, see splat below;
this occurs on at least NumaConnect systems.
Fix by checking if a memory controller info structure was found.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000320
IP: [<ffffffff819f714f>] decode_bus_error+0x2f/0x2b0
PGD 2f8b5a3067 PUD 2f8b5a2067 PMD 0
Oops: 0000 [#2] SMP
Modules linked in:
CPU: 224 PID: 11930 Comm: stream_c.exe.gn Tainted: G D 3.19.0 #1
Hardware name: Supermicro H8QGL/H8QGL, BIOS 3.5b 01/28/2015
task: ffff8807dbfb8c00 ti: ffff8807dd16c000 task.ti: ffff8807dd16c000
RIP: 0010:[<ffffffff819f714f>] [<ffffffff819f714f>] decode_bus_error+0x2f/0x2b0
RSP: 0000:ffff8907dfc03c48 EFLAGS: 00010297
RAX: 0000000000000001 RBX: 9c67400010080a13 RCX: 0000000000001dc6
RDX: 000000001dc61dc6 RSI: ffff8907dfc03df0 RDI: 000000000000001c
RBP: ffff8907dfc03ce8 R08: 0000000000000000 R09: 0000000000000022
R10: ffff891fffa30380 R11: 00000000001cfc90 R12: 0000000000000008
R13: 0000000000000000 R14: 000000000000001c R15: 00009c6740001000
FS: 00007fa97ee18700(0000) GS:ffff8907dfc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000320 CR3: 0000003f889b8000 CR4: 00000000000407e0
Stack:
0000000000000000 ffff8907dfc03df0 0000000000000008 9c67400010080a13
000000000000001c 00009c6740001000 ffff8907dfc03c88 ffffffff810e4f9a
ffff8907dfc03ce8 ffffffff81b375b9 0000000000000000 0000000000000010
Call Trace:
<IRQ>
? vprintk_default
? printk
amd_decode_mce
notifier_call_chain
atomic_notifier_call_chain
mce_log
machine_check_poll
mce_timer_fn
? mce_cpu_restart
call_timer_fn.isra.29
run_timer_softirq
__do_softirq
irq_exit
smp_apic_timer_interrupt
apic_timer_interrupt
<EOI>
? down_read_trylock
__do_page_fault
? __schedule
do_page_fault
page_fault
Signed-off-by: Daniel J Blueman <daniel@numascale.com>
Link: http://lkml.kernel.org/r/1424144078-24589-1-git-send-email-daniel@numascale.com
Cc: stable@vger.kernel.org
[ Boris: massage commit message ]
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
d0585cd815fa ("sb_edac: Claim a different PCI device") changed the
probing of sb_edac to look for PCI device 0x3ca0:
3f:0e.0 System peripheral: Intel Corporation Xeon E5/Core i7 Processor Home Agent (rev 07)
00: 86 80 a0 3c 00 00 00 00 07 00 80 08 00 00 80 00
...
but we're matching for 0x3ca8, i.e. PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA
in sbridge_probe() therefore the probing fails.
Changing it to probe for 0x3ca0 (PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0),
.i.e., the 14.0 device, fixes the issue and driver loads successfully
again:
[ 2449.013120] EDAC DEBUG: sbridge_init:
[ 2449.017029] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[ 2449.022368] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:3ca0
[ 2449.028498] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[ 2449.033768] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
[ 2449.039028] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:3ca8
[ 2449.045155] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
...
Add a debug printk while at it to be able to catch the failure in the
future and dump driver version on successful load.
Fixes: d0585cd815fa ("sb_edac: Claim a different PCI device")
Cc: stable@vger.kernel.org # 3.18
Acked-by: Aristeu Rozanski <aris@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
If edac_mc_add_mc() fails then we should preserve the error code, but
instead the current code returns success.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://lkml.kernel.org/r/20150128191351.GC10259@mwanda
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Fix sparse warnings.
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Also use goto labels for all failure paths in
edac_create_sysfs_mci_device and update meaningless labels.
Signed-off-by: Junjie Mao <junjie.mao@hotmail.com>
Link: http://lkml.kernel.org/r/BLU436-SMTP25291B6B612942A212AEBFE95300@phx.gbl
[ Boris: Use ! for 0 checks and add newlines for less crammed code. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Remove the function i5100_recmema_dm_buf_id() that is not used anywhere.
This was partially found by using a static code analysis program called
cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Link: http://lkml.kernel.org/r/1420999030-21770-1-git-send-email-rickard_strandqvist@spectrumdigital.se
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Add EDAC support for ecc errors reporting on the synopsys ddr
controller. The ddr ecc controller corrects single bit errors and
detects double bit errors.
Selected important-ish notes from the changelog:
- I have not taken care of spliting synps_edac_geterror_info function as
it adds additional indentation levels and moreover the existing changes
were made as part of the v2 review comments
- Removed dt binding info as already there is a binding info available
under memorycontroller. so, updated ecc info there.
- Shortened the prefix "sysnopsys" to "synps"
Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Link: http://lkml.kernel.org/r/a728a8d4678f4dbf9de189a480297c3d@BY2FFO11FD034.protection.gbl
[ Boris: massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
s/kenel/kernel/g
[ Boris: massage commit message a bit ]
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Cc: Johannes Thumshirn <johannes.thumshirn@men.de>
Link: http://lkml.kernel.org/r/1419749085-7128-1-git-send-email-kuleshovmail@gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Fixes the following sparse warnings:
drivers/edac/mce_amd_inj.c:204:3: warning:
symbol 'dfs_fls' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Link: http://lkml.kernel.org/r/1418087095-14174-1-git-send-email-weiyj_lk@163.com
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core update from Greg KH:
"Here's the set of driver core patches for 3.19-rc1.
They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes,
just removing a line in a structure.
Other than that, a few minor driver core and debugfs changes. There
are some ath9k patches coming in through this tree that have been
acked by the wireless maintainers as they relied on the debugfs
changes.
Everything has been in linux-next for a while"
* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
fs: debugfs: add forward declaration for struct device type
firmware class: Deletion of an unnecessary check before the function call "vunmap"
firmware loader: fix hung task warning dump
devcoredump: provide a one-way disable function
device: Add dev_<level>_once variants
ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
ath: use seq_file api for ath9k debugfs files
debugfs: add helper function to create device related seq_file
drivers/base: cacheinfo: remove noisy error boot message
Revert "core: platform: add warning if driver has no owner"
drivers: base: support cpu cache information interface to userspace via sysfs
drivers: base: add cpu_device_create to support per-cpu devices
topology: replace custom attribute macros with standard DEVICE_ATTR*
cpumask: factor out show_cpumap into separate helper function
driver core: Fix unbalanced device reference in drivers_probe
driver core: fix race with userland in device_add()
sysfs/kernfs: make read requests on pre-alloc files use the buffer.
sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
fs: sysfs: return EGBIG on write if offset is larger than file size
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac
Pull edac updates from Mauro Carvalho Chehab:
- Broadwell-DE support on sb-edac driver
- Some fixes at sb-edac driver
* tag 'edac/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
sb_edac: Fix typo computing number of banks
sb_edac: Add support for Broadwell-DE processor
sb_edac: Fix discovery of top-of-low-memory for Haswell
sb_edac: Fix erroneous bytes->gigabytes conversion
sb_edac: Fix off-by-one error in number of channels
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS update from Ingo Molnar:
"The biggest change in this cycle is better support for UCNA
(UnCorrected No Action) events:
"Handle all uncorrected error reports in the same way (soft
offline the page). We used to only do that for SRAO
(software recoverable action optional) machine checks, but
it makes sense to also do it for UCNA (UnCorrected No
Action) logs found by CMCI or polling."
plus various x86 MCE handling updates and fixes"
* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Spell "panicked" correctly
x86, mce: Support memory error recovery for both UCNA and Deferred error in machine_check_poll
x86, mce, severity: Extend the the mce_severity mechanism to handle UCNA/DEFERRED error
x86, MCE, AMD: Assign interrupt handler only when bank supports it
x86, MCE, AMD: Drop software-defined bank in error thresholding
x86, MCE, AMD: Move invariant code out from loop body
x86, MCE, AMD: Correct thresholding error logging
x86, MCE, AMD: Use macros to compute bank MSRs
RAS, HWPOISON: Fix wrong error recovery status
GHES: Make ghes_estatus_caches static
APEI, GHES: Cleanup unnecessary function for lockless list
|
|
Pull EDAC updates from Borislav Petkov:
"EDAC updates all over the place:
- Enablement for AMD F15h models 0x60 CPUs. Most notably DDR4 RAM
support. Out of tree stuff is adding the required PCI IDs. From
Aravind Gopalakrishnan.
- Enable amd64_edac for 32-bit due to popular demand. From Tomasz
Pala.
- Convert the AMD MCE injection module to debugfs, where it belongs.
- Misc EDAC cleanups"
* tag 'edac_for_3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, MCE, AMD: Correct formatting of decoded text
EDAC, mce_amd_inj: Add an injector function
EDAC, mce_amd_inj: Add hw-injection attributes
EDAC, mce_amd_inj: Enable direct writes to MCE MSRs
EDAC, mce_amd_inj: Convert mce_amd_inj module to debugfs
EDAC: Delete unnecessary check before calling pci_dev_put()
EDAC, pci_sysfs: remove unneccessary ifdef around entire file
ghes_edac: Use snprintf() to silence a static checker warning
amd64_edac: Build module on x86-32
EDAC, MCE, AMD: Add decoding table for MC6 xec
amd64_edac: Add F15h M60h support
{mv64x60,ppc4xx}_edac,: Remove deprecated IRQF_DISABLED
EDAC: Sync memory types and names
EDAC: Add DDR3 LRDIMM entries to edac_mem_types
x86, amd_nb: Add device IDs to NB tables for F15h M60h
pci_ids: Add PCI device IDs for F15h M60h
|
|
Code will always think there are 16 banks because of a typo
Reported-by: Misha
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Broadwell-DE is the microserver version of next generation Xeon
processors. A whole bunch of new PCIe device ids, but otherwise
pretty much the same as Haswell.
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Haswell moved the TOLM/TOHM registers to a different device and offset.
The sb_edac driver accounted for the change of device, but not for the
new offset. There was also a typo in the constant to fill in the low
26 bits (was 0x1ffffff, should be 0x3ffffff).
This resulted in a bogus value for the top of low memory:
EDAC DEBUG: get_memory_layout: TOLM: 0.032 GB (0x0000000001ffffff)
which would result in EDAC refusing to translate addresses for
errors above the bogus value and below 4GB:
sbridge MC3: HANDLING MCE MEMORY ERROR
sbridge MC3: CPU 0: Machine Check Event: 0 Bank 7: 8c00004000010090
sbridge MC3: TSC 0
sbridge MC3: ADDR 2000000
sbridge MC3: MISC 523eac86
sbridge MC3: PROCESSOR 0:306f3 TIME 1414600951 SOCKET 0 APIC 0
MC3: 1 CE Error at TOLM area, on addr 0x02000000 on any memory ( page:0x0 offset:0x0 grain:32 syndrome:0x0)
With the fix we see the correct TOLM value:
DEBUG: get_memory_layout: TOLM: 2.048 GB (0x000000007fffffff)
and we decode address 2000000 correctly:
sbridge MC3: HANDLING MCE MEMORY ERROR
sbridge MC3: CPU 0: Machine Check Event: 0 Bank 7: 8c00004000010090
sbridge MC3: TSC 0
sbridge MC3: ADDR 2000000
sbridge MC3: MISC 523e1086
sbridge MC3: PROCESSOR 0:306f3 TIME 1414601319 SOCKET 0 APIC 0
DEBUG: get_memory_error_data: SAD interleave package: 0 = CPU socket 0, HA 0, shiftup: 0
DEBUG: get_memory_error_data: TAD#0: address 0x0000000002000000 < 0x000000007fffffff, socket interleave 1, channel interleave 4 (offset 0x00000000), index 0, base ch: 0, ch mask: 0x01
DEBUG: get_memory_error_data: RIR#0, limit: 4.095 GB (0x00000000ffffffff), way: 1
DEBUG: get_memory_error_data: RIR#0: channel address 0x00200000 < 0xffffffff, RIR interleave 0, index 0
DEBUG: sbridge_mce_output_error: area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0
MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x2000 offset:0x0 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0)
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Signed-off-by: Jim Snow <jim.snow@intel.com>
Signed-off-by: Lukasz Anaczkowski <lukasz.anaczkowski@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
This prevented edac sysfs code from properly handling 6 channels
per memory controller.
Signed-off-by: Jim Snow <jim.snow@intel.com>
Signed-off-by: Lukasz Anaczkowski <lukasz.anaczkowski@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Write out MCx_ADDR into the more humanly readable "MCx Error Address"
and remove double colon in the output.
Cc: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Selectively inject either a real MCE or a sw-only version which
exercises the decoding path only. The hardware-injected MCE triggers a
machine check exception (#MC) so that the MCE handler can be bothered to
do something too.
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Expose struct mce->inject_flags.
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
Normally, writing those causes a #GP but HWCR[McStatusWrEn] controls
that. Provide a knob.
Signed-off-by: Borislav Petkov <bp@suse.de>
|
