aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/mellanox
AgeCommit message (Collapse)Author
2014-12-16net/mlx4_core: Limit count field to 24 bits in qp_alloc_resJack Morgenstein
[ Upstream commit 2d5c57d7fbfaa642fb7f0673df24f32b83d9066c ] Some VF drivers use the upper byte of "param1" (the qp count field) in mlx4_qp_reserve_range() to pass flags which are used to optimize the range allocation. Under the current code, if any of these flags are set, the 32-bit count field yields a count greater than 2^24, which is out of range, and this VF fails. As these flags represent a "best-effort" allocation hint anyway, they may safely be ignored. Therefore, the PF driver may simply mask out the bits. Fixes: c82e9aa0a8 "mlx4_core: resource tracking for HCA resources used by guests" Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-21net/mlx4_en: Fix BlueFlame raceEugenia Emantayev
commit 2d4b646613d6b12175b017aca18113945af1faf3 upstream. Fix a race between BlueFlame flow and stamping in post send flow. Example: SW: Build WQE 0 on the TX buffer, except the ownership bit SW: Set ownership for WQE 0 on the TX buffer SW: Ring doorbell for WQE 0 SW: Build WQE 1 on the TX buffer, except the ownership bit SW: Set ownership for WQE 1 on the TX buffer HW: Read WQE 0 and then WQE 1, before doorbell was rung/BF was done for WQE 1 HW: Produce CQEs for WQE 0 and WQE 1 SW: Process the CQEs, and stamp WQE 0 and WQE 1 accordingly (on the TX buffer) SW: Copy WQE 1 from the TX buffer to the BF register - ALREADY STAMPED! HW: CQE error with index 0xFFFF - the BF WQE's control segment is STAMPED, so the BF index is 0xFFFF. Error: Invalid Opcode. As a result QP enters the error state and no traffic can be sent. Solution: When stamping - do not stamp last completed wqe. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Vinson Lee <vlee@twopensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26net/mlx4_core: Preserve pci_dev_data after __mlx4_remove_one()Wei Yang
[ Upstream commit befdf8978accecac2e0739e6b5075afc62db37fe ] pci_match_id() just match the static pci_device_id, which may return NULL if someone binds the driver to a device manually using /sys/bus/pci/drivers/.../new_id. This patch wrap up a helper function __mlx4_remove_one() which does the tear down function but preserve the drv_data. Functions like mlx4_pci_err_detected() and mlx4_restart_one() will call this one with out releasing drvdata. Fixes: 97a5221 "net/mlx4_core: pass pci_device_id.driver_data to __mlx4_init_one during reset". CC: Bjorn Helgaas <bhelgaas@google.com> CC: Amir Vadai <amirv@mellanox.com> CC: Jack Morgenstein <jackm@dev.mellanox.co.il> CC: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26net/mlx4_core: pass pci_device_id.driver_data to __mlx4_init_one during resetWei Yang
[ No upstream commit, this is a cherry picked backport enabler. ] The second parameter of __mlx4_init_one() is used to identify whether the pci_dev is a PF or VF. Currently, when it is invoked in mlx4_pci_slot_reset() this information is missed. This patch match the pci_dev with mlx4_pci_table and passes the pci_device_id.driver_data to __mlx4_init_one() in mlx4_pci_slot_reset(). Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-16mlx4_en: don't use napi_synchronize inside mlx4_en_netpollChris Mason
commit c98235cb8584a72e95786e17d695a8e5fafcd766 upstream. The mlx4 driver is triggering schedules while atomic inside mlx4_en_netpoll: spin_lock_irqsave(&cq->lock, flags); napi_synchronize(&cq->napi); ^^^^^ msleep here mlx4_en_process_rx_cq(dev, cq, 0); spin_unlock_irqrestore(&cq->lock, flags); This was part of a patch by Alexander Guller from Mellanox in 2011, but it still isn't upstream. Signed-off-by: Chris Mason <clm@fb.com> Acked-By: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Masoud Sharbiani <msharbiani@twitter.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08net/mlx4_en: Fixed crash when port type is changedAmir Vadai
[ Upstream commit 1ec4864b10171b0691ee196d7006ae56d2c153f2 ] timecounter_init() was was called only after first potential timecounter_read(). Moved mlx4_en_init_timestamp() before mlx4_en_init_netdev() Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-20net/mlx4_core: Fix call to __mlx4_unregister_macJack Morgenstein
[ Upstream commit c32b7dfbb1dfb3f0a68f250deff65103c8bb704a ] In function mlx4_master_deactivate_admin_state() __mlx4_unregister_mac was called using the MAC index. It should be called with the value of the MAC itself. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11net/mlx4_core: VFs must ignore the enable_64b_cqe_eqe module paramJack Morgenstein
[ Upstream commit b30513202c6c14120f70b2e9aa1e97d47bbc2313 ] Slaves get the 64B CQE/EQE state from QUERY_HCA, not from the module parameter. If the parameter is set to zero, the slave outputs an incorrect/irrelevant warning message that 64B CQEs/EQEs are supported but not enabled (even if the hypervisor has enabled 64B CQEs/EQEs). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11net/mlx4_core: Don't give VFs MAC addresses which are derived from the PF MACOr Gerlitz
[ Upstream commit 0508ad646836007e6e6b62331eee7356844eac3d ] If the user has not assigned a MAC address to a VM, then don't give it MAC which is based on the PF one. The current derivation scheme is wrong and leads to VM MAC collisions when the number of cards/hypervisors becomes big enough. Instead, just give it zeros and let them figure out what to do with that. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-24net/mlx_en: Timestamping is not supported in slave modeAmir Vadai
Old hypervisors don't mask out timestamp capability for slave. Till slave support will be added, need to disable capability by slave. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04net/mlx4_core: Keep VF assigned MAC in the PF admin tableOr Gerlitz
MAC addresses assigned by the PF to VFs were not kept in the PF driver admin table. As a result, displaying the VF MACs from the PF interface to user space showed zero address where in fact the VF got non-zero address from the PF, fix that. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04net/mlx4_en: Handle unassigned VF MAC address correctlyOr Gerlitz
When a VF sense they didn't get MAC address, use random one. This will address the case of administrator not assigning MAC to the VF through the PF OS APIs and keep udev happy. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04net/mlx4_core: Return -EPROBE_DEFER when a VF is probed before PF is ↵Jack Morgenstein
sufficiently initialized In the PF initialization, SRIOV is enabled before the PF is fully initialized. This allows the kernel to probe the newly-exposed VFs before the PF is ready to handle them (nested probes). Have the probe method return the -EPROBE_DEFER value in this situation (instead of the VF probe method retrying its initialization in a loop, and returning -EIO on failure). When -EPROBE_DEFER is returned by the VF probe method, the kernel itself will retry the probe after a suitable delay. Based upon a suggestion by Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04net/mlx4_en: Fix adaptive moderation cq updateSagi Grimberg
When turning on adaptive_rx under adaptive moderation, the CQ's moderation count wasn't updated according to rx_frames which resulted in too many interrupts and bandwidth drop. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-11net/mlx4: Strengthen VLAN tags/priorities enforcement in VST modeRony Efraim
Make sure that the following steps are taken: - drop packets sent by the VF with vlan tag - block packets with vlan tag which are steered to the VF - drop/block tagged packets when the policy is priority-tagged - make sure VLAN stripping for received packets is set - make sure force UP bit for the VF QP is set Use enum values for all the above instead of numerical bit offsets. Signed-off-by: Rony Efraim <ronye@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-11net/mlx4_core: Add missing report on VST and spoof-checking dev capsOr Gerlitz
Commits e6b6a23 "net/mlx4: Add VF MAC spoof checking support" and 3f7fb021 "net/mlx4: Add set VF default vlan ID and priority support" missed reporting in the device capabilities dump when these features are actually supported. Also two too noisy debug messages which produce message on every QP opened by a VF, were left in the code, fix that. Signed-off-by: Rony Efraim <ronye@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull InfiniBand/RDMA changes from Roland Dreier: - XRC transport fixes - Fix DHCP on IPoIB - mlx4 preparations for flow steering - iSER fixes - miscellaneous other fixes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (23 commits) IB/iser: Add support for iser CM REQ additional info IB/iser: Return error to upper layers on EAGAIN registration failures IB/iser: Move informational messages from error to info level IB/iser: Add module version mlx4_core: Expose a few helpers to fill DMFS HW strucutures mlx4_core: Directly expose fields of DMFS HW rule control segment mlx4_core: Change a few DMFS fields names to match firmare spec mlx4: Match DMFS promiscuous field names to firmware spec mlx4_core: Move DMFS HW structs to common header file IB/mlx4: Set link type for RAW PACKET QPs in the QP context IB/mlx4: Disable VLAN stripping for RAW PACKET QPs mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level RDMA/iwcm: Don't touch cmid after dropping reference IB/qib: Correct qib_verbs_register_sysfs() error handling IB/ipath: Correct ipath_verbs_register_sysfs() error handling RDMA/cxgb4: Fix SQ allocation when on-chip SQ is disabled SRPT: Fix odd use of WARN_ON() IPoIB: Fix ipoib_hard_header() return value RDMA: Rename random32() to prandom_u32() RDMA/cxgb3: Fix uninitialized variable ...
2013-04-30mlx4_en: fix a build error on 32bit archesEric Dumazet
commit b6c39bfcf1d7d63 ("net/mlx4_en: Add a service task") added a build error on 32bit arches. ERROR: "__udivdi3" [drivers/net/ethernet/mellanox/mlx4/mlx4_en.ko] undefined! Fix this problem by using do_div() Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-26net/mlx4: Add support to get VF configRony Efraim
Support getting VF config. Signed-off-by: Rony Efraim <ronye@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-26net/mlx4: Add VF MAC spoof checking supportRony Efraim
Add ndo_set_vf_spoofchk support Signed-off-by: Rony Efraim <ronye@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-26net/mlx4: Add set VF default vlan ID and priority supportRony Efraim
Add support to ndo_set_vf_vlan in the driver. Once this call is used the vport is considered to be in VST mode. In this mode, the PPF driver configures Ethernet QPs created by this VF to use this vlan id and priority. Currently RoCE isn't supported on that mode. The special values of VID=4095 or VID=0,UP=0 are considered as VGT. Signed-off-by: Rony Efraim <ronye@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-26net/mlx4: Add set VF mac address supportRony Efraim
Add ndo_set_vf_mac support which allows to set the MAC address for mlx4 VF Ethernet NICs from the host. Signed-off-by: Rony Efraim <ronye@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-26net/mlx4: Add structures to keep VF Ethernet ports informationRony Efraim
This patch add struct mlx4_vport_state where all the parameters related to management of VFs port (virtual ports of the NIC eswitch) are kept. The driver keeps an administrative and operational copy of the settings. The current administrative copy becomes operational on the event of probing a VF either on a VM or on the host. Signed-off-by: Rony Efraim <ronye@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-26net/mlx4: Add reference counting to MAC registerationRony Efraim
Add reference counting to the driver MAC registeration code. This would be needed for cases where a mac is registered from more than once, e.g when both the host and the VM driver register the same mac, the host for mac spoof protection purposes and the VM for its regular needs. Signed-off-by: Rony Efraim <ronye@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-26net/mlx4_en: Disable HW clock overflow check when no HW supportAmir Vadai
Should not run HW clock overflow check if HW clock is not supported. Also, since this watchdog is the only customer of service_task, no need to start it in that case. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-26net/mlx4_core: Disable HW timestamping for VFsAmir Vadai
Disable timestamp capability on virtual functions. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24mlx4_core: Expose a few helpers to fill DMFS HW strucuturesHadar Hen Zion
Re-arrange some of code which fills DMFS HW structures so we can use it from within the core driver and from the IB driver too, e.g when verbs DMFS structures are transformed into mlx4 hardware structs. Also, add struct mlx4_flow_handle struct which will be of use by the DMFS verbs flow in the IB driver. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-24mlx4_core: Directly expose fields of DMFS HW rule control segmentHadar Hen Zion
Some of struct mlx4_net_trans_rule_hw_ctrl fields were packed into u32 and accessed through bit field operations. Expose and access them directly as u8 or u16. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-24mlx4_core: Change a few DMFS fields names to match firmare specHadar Hen Zion
Change struct mlx4_net_trans_rule_hw_eth :: vlan_id name to vlan_tag Change struct mlx4_net_trans_rule_hw_ib :: r_u_qpn name to l3_qpn The patch doesn't introduce any functional change or API change towards the firmware. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-24mlx4: Match DMFS promiscuous field names to firmware specHadar Hen Zion
Align the names used by enum mlx4_net_trans_promisc_mode with the actual firmware specification. The patch doesn't introduce any functional change or API change towards the firmware. Remove MLX4_FS_PROMISC_FUNCTION_PORT which isn't of use. Add new enums MLX4_FS_{UC/MC}_SNIFFER as a preparation step for sniffer support. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-24mlx4_core: Move DMFS HW structs to common header fileHadar Hen Zion
Move flow steering HW structures to be on the public mlx4 include directory, as a pre-step for the mlx4 IB driver to use them too. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-24mlx4_core: Reduce warning message for SRQ_LIMIT event to debug levelJack Morgenstein
Commit acba2420f9d2 ("mlx4_core: Add wrapper functions and comm channel and slave event support to EQs") introduced a warning printout for SRQ LIMIT events. This warning can flood the log when (correct, normally operating) apps use SRQ LIMIT events as a trigger to post WQEs to SRQs. Reduce the warning message to be a debug printout. Reported-by: Rick Warner <rick@microway.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-24net/mlx4_en: Add a service taskAmir Vadai
Add a service task to run tasks that needed to be executed periodically. Currently the only task is a watchdog to catch NIC clock overflow, to make timestamping accurate. Will move the statistics task into this framework in a later patch. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24net/mlx4_en: Support software timestampingAmir Vadai
Kernel software timestamping requires that the driver calls skb_tx_timestamp just before passing the skb to the HW MAC layer. This patch adds this call. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24net/mlx4_en: Add HW timestamping (TS) supportAmir Vadai
The patch allows to enable/disable HW timestamping for incoming and/or outgoing packets. It adds and initializes all structs and callbacks needed by kernel TS API. To enable/disable HW timestamping appropriate ioctl should be used. Currently HWTSTAMP_FILTER_ALL/NONE and HWTSAMP_TX_ON/OFF only are supported. When enabling TS on receive flow - VLAN stripping will be disabled. Also were made all relevant changes in RX/TX flows to consider TS request and plant HW timestamps into relevant structures. mlx4_ib was fixed to compile with new mlx4_cq_alloc() signature. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24net/mlx4_core: Read HCA frequency and map internal clockEugenia Emantayev
Read HCA frequency, read PCI clock bar and offset, map internal clock to PCI bar. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24net/mlx4_core: Add timestamping device capabilityEugenia Emantayev
Add new device capability for timestamping support and query FW to retrieve it. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: add protocol argument to packet tagging functionsPatrick McHardy
Add a protocol argument to the VLAN packet tagging functions. In case of HW tagging, we need that protocol available in the ndo_start_xmit functions, so it is stored in a new field in the skb. The new field fits into a hole (on 64 bit) and doesn't increase the sks's size. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: prepare for 802.1ad VLAN filtering offloadPatrick McHardy
Change the rx_{add,kill}_vid callbacks to take a protocol argument in preparation of 802.1ad support. The protocol argument used so far is always htons(ETH_P_8021Q). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-16mlx4_core: Implement SRQ object lookup from srqnShlomo Pongratz
Expose a new API mlx4_srq_lookup() to retrive a SRQ based on its number. This API is needed in the mlx4_ib driver CQ polling logic, when a work completion is associated with a XRC TGT QP. Since a target QP may redirect to more than one XRC SRQ, the srq field in the QP has no usage and the real XRC SRQ need to be retrived using the information from the XRCETH IB header which is placed in the HW CQE. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-04-11net/mlx4_en: set correct MTU in SRIOVEugenia Emantayev
When setting MTU in SRIOV mode add ETH, VLAN and FCS header length to the maximum MTU obtained from QUERY_DEV_CAP. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-11net/mlx4_core: Translate guest B0 steering rules to DMFSHadar Hen Zion
The different steering modes are global to the device, with DMFS being introduced after SRIOV was merged. Hence, SRIOV guests running legacy / older Linux kernels or non-Linux drivers may provide B0 steering directives when the hypervisor is using DMFS and fail. Under B0 only L2 steering rules are allowed, hence B0 is a subset of DMFS. Use this fact to enable such legacy guests to run by modifying the SRIOV B0 steering wrapper to translate guest B0 directives to DMFS ones when the device uses DMFS. The translated B0 rule has to be kept in the resource tracker as a B0 object to allow for lookup in case of detach. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-11net/mlx4_core: Add helper function to translate B0 steering rules to DMFSHadar Hen Zion
A pre-step for supporting guests that use B0 steering over a hypervisor that runs in DMFS (device managed flow steering mode). Add helper function which allows to translate L2 attachments / detachments provided in B0 mode to DMFS rules. Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-07net/mlx4_en: Advertize DCB_CAP_DCBX_HOST in getdcbxOr Gerlitz
When our getdcbx entry is called, DCB_CAP_DCBX_HOST should be advertized too. Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-07net/mlx4_en: Enable DCB ETS ops only when supported by the firmwareOr Gerlitz
Enable the DCB ETS ops only when supported by the firmware. For older firmware/cards which don't support ETS, advertize only PFC DCB ops. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-07net/mlx4_core: Added proper description for two device capabilitiesOr Gerlitz
Added readable description for the DPDP and port sensing device capabilities. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Pull net into net-next to get the synchronize_net() bug fix in bonding. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02net/mlx4_en: Fix setting initial MAC addressYan Burman
Commit 6bbb6d9 "net/mlx4_en: Optimize Rx fast path filter checks" introduced a regression under which the MAC address read from the card was not converted correctly (the most significant byte was not handled), fix that. Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Yan Burman <yanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Pull to get the thermal netlink multicast group name fix, otherwise the assertion added in net-next to netlink to detect that kind of bug makes systems unbootable for some folks. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-01 05:15:37 +0000