aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-10-10[PATCH] drivers/net/wireless/wl3501_cs.c: remove redundant memsetMariusz Kozlowski
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] zd1211rw: Add ID for ZyXEL M-202 XtremeMIMODaniel Drake
Tested by Nathen Meyers FCC ID: SI5WUB221Z zd1211b chip 0586:340a v4810 high 00-13-49 AL2230_RF pa0 ----S Despite the product name, I'm pretty sure this isn't a MIMO device. It appears just to be a normal ZD1211B and we have never heard of these devices having more than 1 RF. I guess they named this product this way to make it appear that it fits in with the rest of their XtremeMIMO product range. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] zd1211rw: consistent handling of ZD1211 specific ratesUlrich Kunitz
As pointed out by Daniel Drake, the zd1211rw driver used several different rate values and names throughout the driver. He has written a patch to change it and tweaked it after some pretty wild ideas from my side. But the discussion helped me to understand the problem better and I think I have nailed it down with this patch. A zd-rate will consist from now on of a four-bit "pure" rate value and a modulation type flag as used in the ZD1211 control set used for packet transmission. This is consistent with the usage in the zd_rates table. If possible these zd-rates should be used in the code. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] zd1211rw: Add ID for Sitecom WL-162Daniel Drake
Tested by Giuseppe Lippolis zd1211b chip 0cde:001a v4810 high 00-60-b3 AL2230_RF pa0 g--NS Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] zd1211rw: removed noisy debug messagesUlrich Kunitz
While developing the driver we added a lot of debug messages for setting hardware registers. These messages make the reading of the log files difficult and are of no use anymore. This patch removes those messages in zd_chip.c. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10xen-netfront: remove dead codeJeremy Fitzhardinge
This patch removes some residual dead code left over from removing the "flip" receive mode. This patch doesn't change the generated output at all, since gcc already realized it was dead. This resolves the "regression" reported by Adrian. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Adrian Bunk <bunk@stusta.de> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10drivers/net/3c505: Convert to generic booleanRichard Knutsson
Convert to generic boolean Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10drivers/net/tokenring: Convert to generic booleanRichard Knutsson
Convert to generic boolean Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10drivers/net/tokenring/3c359.cSurya Prabhakar N
Hi, Replacing kmalloc with kzalloc and cleaning up memset in drivers/net/tokenring/3c359.c Signed-off-by: Surya Prabhakar <surya.prabhakar@wipro.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10cxgb3 - MAC workaround updateDivy Le Ray
Update the MAC workaround to deal with switches that do not honor pause frames. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[PATCH] drivers/net: remove superfluous memsetMariusz Kozlowski
This patch covers something like this: dev = alloc_*dev(... ... priv = netdev_priv(dev); memset(priv, 0, sizeof(*priv)); The memset() here is superfluous. alloc_netdev() uses kzalloc() to allocate needed memory so there is no need to zero the priv region twice. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10Clean up duplicate includes in drivers/net/Jesper Juhl
This patch cleans up duplicate includes in drivers/net/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[netdrvr] ns83820: add ethtool media supportJeff Garzik
Split out from patch authored by Dan Faerch <dan@hacker.dk>. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10net/tulip/xircom_cb.c: remove superfulous priv assignmentMariusz Kozlowski
Unpatched version does sth like this: dev = alloc_etherdev(... private = netdev_priv(dev); ... dev->priv = private; which doesn't make much sense (does it?) because this is done in alloc_netdev() already. struct net_device *alloc_netdev(... { ... if (sizeof_priv) dev->priv = netdev_priv(dev); This patch removes superfluous code. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> drivers/net/tulip/xircom_cb.c | 32853 -> 32831 (-22 bytes) drivers/net/tulip/xircom_cb.o | 123984 -> 123984 (0 bytes) drivers/net/tulip/xircom_cb.c | 1 - 1 file changed, 1 deletion(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10S2IO: Fixed Link LED issue when MSI-X is enabledSivakumar Subramani
-Fixed Link LED issue when MSI-X is enabled. Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10S2IO: Fixes in MSIX related code.Sivakumar Subramani
- Calling store_xmsi_data to store the MSI-X datas during initialization in s2io-init_nic function - Disabling NAPI when MSI-X is enabled - Freeing sp->entries and sp->s2io_entries in s2io_rem_isr Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[S2IO]: Making MSIX as default intr_typeSivakumar Subramani
- Making MSIX as default intr_type - Driver will test MSI-X by issuing test MSI-X vector and if fails it will fallback to INTA Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[8139too]: tab-align enums and structs; remove dead codeJeff Garzik
* (main change) tab-align hardware register value enums, and hw struct * MMIO_FLUSH_AUDIT_COMPLETE has been defined to 1 for a while. Remove the code activated when it is set to zero. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[netdrvr] 8139cp, 8139too: convert to generic DMAJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10drivers/net/via-velocity.c: mostly kmalloc + memset conversion to kcallocMariusz Kozlowski
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> drivers/net/via-velocity.c | 88263 -> 88120 (-143 bytes) drivers/net/via-velocity.o | 254264 -> 253828 (-436 bytes) drivers/net/via-velocity.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10drivers/net/sb1250-mac.c: kmalloc + memset conversion to kcallocMariusz Kozlowski
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> drivers/net/sb1250-mac.c | 76286 -> 76199 (-87 bytes) drivers/net/sb1250-mac.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10drivers/net/skfp: Remove dead code referencing pci_find_device()Jeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10IOC3: Switch hw checksumming to ethtool configurable.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10drivers/net/cxgb3: removed several unneeded zero initilizationDenis Cheng
Cc: linux-bugs@chelsio.com Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10dev->priv to netdev_priv(dev), drivers/net/tokenring/Yoann Padioleau
Replacing accesses to dev->priv to netdev_priv(dev). The replacment is safe when netdev_priv is used to access a private structure that is right next to the net_device structure in memory. Cf http://groups.google.com/group/comp.os.linux.development.system/browse_thread/thread/de19321bcd94dbb8/0d74a4adcd6177bd This is the case when the net_device structure was allocated with a call to alloc_netdev or one of its derivative. Here is an excerpt of the semantic patch that performs the transformation @ rule1 @ type T; struct net_device *dev; @@ dev = ( alloc_netdev | alloc_etherdev | alloc_trdev ) (sizeof(T), ...) @ rule1bis @ struct net_device *dev; expression E; @@ dev->priv = E @ rule2 depends on rule1 && !rule1bis @ struct net_device *dev; type rule1.T; @@ - (T*) dev->priv + netdev_priv(dev) PS: I have performed the same transformation on the whole kernel and it affects around 70 files, most of them in drivers/net/. Should I split my patch for each subnet directories ? (wireless/, wan/, etc) Thanks to Thomas Surrel for helping me refining my semantic patch. Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> 3c359.c | 58 +++++++++++++++++++++++++++++----------------------------- ibmtr.c | 38 +++++++++++++++++++------------------- lanstreamer.c | 32 ++++++++++++++++---------------- madgemc.c | 4 ++-- olympic.c | 36 ++++++++++++++++++------------------ tmspci.c | 4 ++-- 6 files changed, 86 insertions(+), 86 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[netdrvr] skfp: remove a bunch of dead codeJeff Garzik
The driver has not compiled in anything except PCI support for many years (see drivers/net/skfp/Makefile). This driver is also unmaintained for many years, so arguments for keeping the cross-OS, cross-bus (ISA, EISA, MCA) code do not exist. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[PATCH] libertas: bump driver versionDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: fix sparse-reported problemsDan Williams
A few fields being converted to the wrong sized type, and a few missed endian conversions. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: better descriptions for association errorsDan Williams
Describe the association response status code the firmware returns, based on mail to libertas-dev from Ronak. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: ignore spurious mesh autostart eventsDan Williams
Don't trust the firmware to always send them at the right time, ignore them when the driver thinks mesh autostart is disabled. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: fix misspelling in debug messageDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: pass boot2 version to firmwareLuis Carlos Cobo
Boot2 version used to be hardcoded in the uploaded firmware, this patch preserves the boot2 version before uploading firmware and sends it to the firmware again on resume. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: push WEXT scan requests to a work queueDan Williams
Push WEXT scan requests to a workqueue and have each partial scan queue the next part, then only report results when the complete scan has finished. Full scans don't go through the work queue. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] drivers/net/wireless/libertas/cmd.c: fix adapter->driver_lock ↵Eugene Teo
dereference adapter is NULL if cmdnode is not. Signed-off-by: Eugene Teo <eugeneteo@kernel.sg> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: fix assignment of WEP key typeDan Williams
keytype is a u8 Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: monitor mode support for OLPC firmwareLuis Carlos Cobo
Driver support for the monitor mode support that will be available in the next OLPC 'bleeding edge' Marvell firmware release (most likely, 5.110.16.p2). To activate monitor mode, echo mode > /sys/class/net/{ethX,mshX}/device/libertas_rtap where mode is the hex mask that specifies which frames to sniff (in short, 0x1 for data, 0x2 for all management but beacons, 0x4 for beacons). Any non zero mode will activate the monitor mode, inhibiting transmission in ethX and mshX interfaces and routing all the incoming traffic to a new rtapX interface that will output the packets in 802.11+radiotap headers format. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: fix a few wext abuses...Jean Tourrilhes
o SIOCGIWNAME is not designed to return the version number of the driver. On the other hand, you are free to abuse SIOCGIWNICKN for that purpose. o Don't attempt to fix the WE19/WE20 transition in the driver, because your fixes are bogus, and redundant with the code in the kernel (you may endup with +2, you can't read 32 char ESSID...). o In SIOCSIWTXPOW, if you specified in iwrange that you want dBm, you should only get dBm, which allow to reduce code bloat. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: keep mesh autostart enabled while asleepLuis Carlos Cobo
After loading the firmware, mesh autostart will be disabled. After that, the user will still be able to enable or disable it at will. On suspend, it will be always activated and later on resume it will go back to the state it had before going to sleep. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: revert CAPINFO_MASK to its original valueLuis Carlos Cobo
CAPINFO_MASK changed on commits 981f187b and a091095b. Reverting to the original value. Also move CAPINFO_MASK into the sole user, join.c. CAPINFO_MASK should be in host CPU byte order; capability is converted to device byte order elsewhere. This fixes OLPC ticket #2161 Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: push mesh beacon bit to userspace in scan resultsDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: send association events on adhoc reassociationDan Williams
Send association event to userspace when reassociating to the same ad-hoc network, because it's still an association. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: fix two debug statements in cmdresp.cHolger Schurig
Purely cosmetic: this moves an lbs_deb_enter() to the proper place and changes an erraneous lbs_deb_enter_args() into lbs_deb_leave_args() Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove bss_descriptor->timestampHolger Schurig
Noone used this variable. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove bss_descriptior->networktsfHolger Schurig
This value was parsed out, but then nowhere used ... except in some debugfs output. I can't imagine anyone wanting to use this value for anything real (as no other driver exports it), so bye-bye. Along this, made the columns of /sys/kernel/debug/libertas_wireless/*/getscantable align again. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->scantypeHolger Schurig
scantype was initialized with CMD_SCAN_TYPE_ACTIVE, but there is no code that would ever change it, so we can use that variable directly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->scanmodeHolger Schurig
scanmode was initialized with CMD_BSS_TYPE_ANY, but there is no code that ever can store another value there, so it can go away. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->beaconperiodHolger Schurig
beaconperiod was initialized with MRVDRV_BEACON_INTERVAL, but there is no code that would ever change it's value. We can use the define directly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->adhoc_grate_enabledHolger Schurig
The variable was initialized with 0 (false). There is no code that would ever change it, so we can use the false-patch directly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->listenintervalHolger Schurig
listeninterval was initialized with MRVDRV_DEFAULT_LISTEN_INTERVAL, but there exists that would ever change it. So we can use this define directly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->regiontableindexHolger Schurig
The value was computed, but then never used. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-07 12:31:17 +0000