| Age | Commit message (Collapse) | Author |
|---|
|
http://git.linaro.org/kernel/linux-linaro-stable into linux-linaro-lng-v4.1-rt
LSK RT 15.09 v4.1
Signed-off-by: Gary S. Robertson <gary.robertson@linaro.org>
Conflicts:
linaro/configs/distribution.conf
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable into linux-linaro-lsk-v4.1
This is the 4.1.7 stable release
* tag 'v4.1.7' of git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable: (165 commits)
Linux 4.1.7
ARM: 8405/1: VDSO: fix regression with toolchains lacking ld.bfd executable
x86/idle: Restore trace_cpu_idle to mwait_idle() calls
x86/apic: Fix fallout from x2apic cleanup
x86/xen: make CONFIG_XEN depend on CONFIG_X86_LOCAL_APIC
arm64: perf: fix unassigned cpu_pmu->plat_device when probing PMU PPIs
arm64: KVM: Fix host crash when injecting a fault into a 32bit guest
fnic: Use the local variable instead of I/O flag to acquire io_req_lock in fnic_queuecommand() to avoid deadloack
Add factory recertified Crucial M500s to blacklist
can: pcan_usb: don't provide CAN FD bittimings by non-FD adapters
SCSI: Fix NULL pointer dereference in runtime PM
genirq: Introduce irq_chip_set_type_parent() helper
genirq: Don't return ENOSYS in irq_chip_retrigger_hierarchy
ARM: OMAP: wakeupgen: Restore the irq_set_type() mechanism
irqchip/crossbar: Restore set_wake functionality
irqchip/crossbar: Restore the mask on suspend behaviour
irqchip/crossbar: Restore the irq_set_type() mechanism
9p: ensure err is initialized to 0 in p9_client_read/write
drm/i915: Avoid TP3 on CHV
drm/i915: remove HBR2 from chv supported list
...
|
|
commit b7560de198222994374c1340a389f12d5efb244a upstream.
This helper is required for irq chips which do not implement a
irq_set_type callback and need to call down the irq domain hierarchy
for the actual trigger type change.
This helper is required to fix further wreckage caused by the
conversion of TI OMAP to hierarchical irq domains and therefor tagged
for stable.
[ tglx: Massaged changelog ]
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: <linux@arm.linux.org.uk>
Cc: <nsekhar@ti.com>
Cc: <jason@lakedaemon.net>
Cc: <balbi@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <tony@atomide.com>
Cc: <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-3-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 74a80d67b8316eb3fbeb73dafc060a5a0a708587 upstream.
This reverts commit 42b966fbf35da9c87f08d98f9b8978edf9e717cf.
As implemented, ACS-4 sense reporting for ATA devices bypasses error
diagnosis and handling in libata degrading EH behavior significantly.
Revert the related changes for now.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 84ded2f8e7dda336fc2fb3570726ceb3b3b3590f upstream.
This reverts commit fe7173c206de63fc28475ee6ae42ff95c05692de.
As implemented, ACS-4 sense reporting for ATA devices bypasses error
diagnosis and handling in libata degrading EH behavior significantly.
Revert the related changes for now.
ATA_ID_COMMAND_SET_3/4 constants are not reverted as they're used by
later changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fe16d4f202c59a560533a223bc6375739ee30944 upstream.
This reverts commit a1524f226a02aa6edebd90ae0752e97cfd78b159.
As implemented, ACS-4 sense reporting for ATA devices bypasses error
diagnosis and handling in libata degrading EH behavior significantly.
Revert the related changes for now.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e037239e5e7b61007763984aa35a8329596d8c88 upstream.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
http://git.linaro.org/kernel/linux-linaro-stable into linux-linaro-lng-v4.1-rt
LSK RT 15.08 v4.1
|
|
This API is useful to modify a cpumask indicating some special
nohz-type functionality so that the nohz cores are automatically
added to that set.
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Jones <davej@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1429024675-18938-1-git-send-email-cmetcalf@ezchip.com
Link: http://lkml.kernel.org/r/1430928266-24888-4-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
commit 5f867db63473f32cce1b868e281ebd42a41f8fad upstream.
Commit 66507c7bc8895f0da6b ("mtd: nand: Add support to use nand_base
poi databuf as bounce buffer") added a flag NAND_USE_BOUNCE_BUFFER
using the same bit value as the existing NAND_BUSWIDTH_AUTO.
Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Fixes: 66507c7bc8895f0da6b ("mtd: nand: Add support to use nand_base
poi databuf as bounce buffer")
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c9ddbac9c89110f77cb0fa07e634aaf1194899aa upstream.
09a2c73ddfc7 ("PCI: Remove unused PCI_MSIX_FLAGS_BIRMASK definition")
removed PCI_MSIX_FLAGS_BIRMASK from an exported header because it was
unused in the kernel. But that breaks user programs that were using it
(QEMU in particular).
Restore the PCI_MSIX_FLAGS_BIRMASK definition.
[bhelgaas: changelog]
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
This is the 4.1.5 stable release
* tag 'v4.1.5': (124 commits)
Linux 4.1.5
perf symbols: Store if there is a filter in place
xfs: remote attributes need to be considered data
xfs: remote attribute headers contain an invalid LSN
drm/nouveau/drm/nv04-nv40/instmem: protect access to priv->heap by mutex
drm/nouveau: hold mutex when calling nouveau_abi16_fini()
drm/nouveau/kms/nv50-: guard against enabling cursor on disabled heads
drm/nouveau/fbcon/nv11-: correctly account for ring space usage
qla2xxx: kill sessions/log out initiator on RSCN and port down events
qla2xxx: fix command initialization in target mode.
qla2xxx: Remove msleep in qlt_send_term_exchange
qla2xxx: release request queue reservation.
qla2xxx: Fix hardware lock/unlock issue causing kernel panic.
intel_pstate: Add get_scaling cpu_defaults param to Knights Landing
iscsi-target: Fix iser explicit logout TX kthread leak
iscsi-target: Fix iscsit_start_kthreads failure OOPs
iscsi-target: Fix use-after-free during TPG session shutdown
IB/ipoib: Fix CONFIG_INFINIBAND_IPOIB_CM
NFS: Fix a memory leak in nfs_do_recoalesce
NFSv4: We must set NFS_OPEN_STATE flag in nfs_resync_open_stateid_locked
...
|
|
|
|
commit e54198657b65625085834847ab6271087323ffea upstream.
This patch fixes a regression introduced with the following commit
in v4.0-rc1 code, where a iscsit_start_kthreads() failure triggers
a NULL pointer dereference OOPs:
commit 88dcd2dab5c23b1c9cfc396246d8f476c872f0ca
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date: Thu Feb 26 22:19:15 2015 -0800
iscsi-target: Convert iscsi_thread_set usage to kthread.h
To address this bug, move iscsit_start_kthreads() immediately
preceeding the transmit of last login response, before signaling
a successful transition into full-feature-phase within existing
iscsi_target_do_tx_login_io() logic.
This ensures that no target-side resource allocation failures can
occur after the final login response has been successfully sent.
Also, it adds a iscsi_conn->rx_login_comp to allow the RX thread
to sleep to prevent other socket related failures until the final
iscsi_post_login_handler() call is able to complete.
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4c62360d7562a20c996836d163259c87d9378120 upstream.
The memory error record structure includes as its first field a
bitmask of which subsequent fields are valid. The allows new fields
to be added to the structure while keeping compatibility with older
software that parses these records. This mechanism was used between
versions 2.2 and 2.3 to add four new fields, growing the size of the
structure from 73 bytes to 80. But Linux just added all the new
fields so this test:
if (gdata->error_data_length >= sizeof(*mem_err))
cper_print_mem(newpfx, mem_err);
else
goto err_section_too_small;
now make Linux complain about old format records being too short.
Add a definition for the old format of the structure and use that
for the minimum size check. Pass the actual size to cper_print_mem()
so it can sanity check the validation_bits field to ensure that if
a BIOS using the old format sets bits as if it were new, we won't
access fields beyond the end of the structure.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e3eea1404f5ff7a2ceb7b5e7ba412a6fd94f2935 upstream.
Commit 4104d326b670 ("ftrace: Remove global function list and call function
directly") simplified the ftrace code by removing the global_ops list with a
new design. But this cleanup also broke the filtering of PIDs that are added
to the set_ftrace_pid file.
Add back the proper hooks to have pid filtering working once again.
Reported-by: Matt Fleming <matt@console-pimps.org>
Reported-by: Richard Weinberger <richard.weinberger@gmail.com>
Tested-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d3b58c47d330de8c29898fe9746f7530408f8a59 upstream.
Commit 514ac99c64b "can: fix multiple delivery of a single CAN frame for
overlapping CAN filters" requires the skb->tstamp to be set to check for
identical CAN skbs.
Without timestamping to be required by user space applications this timestamp
was not generated which lead to commit 36c01245eb8 "can: fix loss of CAN frames
in raw_rcv" - which forces the timestamp to be set in all CAN related skbuffs
by introducing several __net_timestamp() calls.
This forces e.g. out of tree drivers which are not using alloc_can{,fd}_skb()
to add __net_timestamp() after skbuff creation to prevent the frame loss fixed
in mainline Linux.
This patch removes the timestamp dependency and uses an atomic counter to
create an unique identifier together with the skbuff pointer.
Btw: the new skbcnt element introduced in struct can_skb_priv has to be
initialized with zero in out-of-tree drivers which are not using
alloc_can{,fd}_skb() too.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Need to use endian neutral functions to read/write LE h/w registers. I.e
insted of __raw_readl and _raw_writel, readl_relaxed and writel_relaxed. If
the first just read/write register with memory barrier, the second will
byteswap it if host operates in BE mode.
Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable into linux-linaro-lsk-v4.1
This is the 4.1.4 stable release
* tag 'v4.1.4' of git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable: (270 commits)
Linux 4.1.4
x86/mpx: Do not set ->vm_ops on MPX VMAs
mm: avoid setting up anonymous pages into file mapping
Fix firmware loader uevent buffer NULL pointer dereference
hpfs: hpfs_error: Remove static buffer, use vsprintf extension %pV instead
hpfs: kstrdup() out of memory handling
ARM: 8397/1: fix vdsomunge not to depend on glibc specific error.h
ARM: 8393/1: smp: Fix suspicious RCU usage with ipi tracepoints
perf bench numa: Fix to show proper convergence stats
arm64: Don't report clear pmds and puds as huge
arm64: bpf: fix endianness conversion bugs
arm64: bpf: fix out-of-bounds read in bpf2a64_offset()
ARM64: smp: Fix suspicious RCU usage with ipi tracepoints
p9_client_write(): avoid double p9_free_req()
EDAC, octeon: Fix broken build due to model helper renames
ARM: dove: fix legacy dove IRQ numbers
agp/intel: Fix typo in needs_ilk_vtd_wa()
rbd: use GFP_NOIO in rbd_obj_request_create()
9p: don't leave a half-initialized inode sitting around
9p: forgetting to cancel request on interrupted zero-copy RPC
...
|
|
commit 764ad8ba8cd4c6f836fca9378f8c5121aece0842 upstream.
The current buffer is much too small if you have a relatively long
hostname. Bring it up to the size of the one that SETCLIENTID has.
Reported-by: Michael Skralivetsky <michael.skralivetsky@primarydata.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 496e7ce2a46562938edcb74f65b26068ee8895f6 upstream.
If GPIOLIB=n:
drivers/leds/leds-gpio.c: In function ‘gpio_leds_create’:
drivers/leds/leds-gpio.c:187: error: implicit declaration of function ‘devm_get_gpiod_from_child’
drivers/leds/leds-gpio.c:187: warning: assignment makes pointer from integer without a cast
Add dummies for fwnode_get_named_gpiod() and devm_get_gpiod_from_child()
for the !GPIOLIB case to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 40b7318319281b1b ("gpio: Support for unified device properties interface")
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c8fff7bc5bba6bd59cad40441c189c4efe7190f6 upstream.
Node 0 might be offline as well as any other numa node,
in this case kernel cannot handle memory allocation and crashes.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: 0c3f061c195c ("of: implement of_node_to_nid as a weak function")
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b86a50c3b5414eafdbee7f34af4a201a4a7817c2 upstream.
Cleanup commit 73679e508201 ("compiler-intel.h: Remove duplicate
definition") removed the double definition of __memory_barrier()
intrinsics.
However, in doing so, it also removed the preceding #undef barrier by
accident, meaning, the actual barrier() macro from compiler-gcc.h with
inline asm is still in place as __GNUC__ is provided.
Subsequently, barrier() can never be defined as __memory_barrier() from
compiler.h since it already has a definition in place and if we trust
the comment in compiler-intel.h, ecc doesn't support gcc specific asm
statements.
I don't have an ecc at hand (unsure if that's still used in the field?)
and only found this by accident during code review, a revert of that
cleanup would be simplest option.
Fixes: 73679e508201 ("compiler-intel.h: Remove duplicate definition")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Cc: Pranith Kumar <bobby.prani@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: mancha security <mancha1@zoho.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0ea61381788a37d864f9841b0fe97d40f7058f3b upstream.
ACPICA commit 4da56eeae0749dfe8491285c1e1fad48f6efafd8
The following commit temporarily disables correct 64-bit FADT addresses
favor during the period the root cause of the bug is not fixed:
Commit: 85dbd5801f62b66e2aa7826aaefcaebead44c8a6
ACPICA: Tables: Restore old behavor to favor 32-bit FADT addresses.
With enough protections, this patch re-enables 64-bit FADT addresses by
default. If regressions are reported against such change, this patch should
be bisected and reverted.
Note that 64-bit FACS favor and 64-bit firmware waking vector favor are
excluded by this commit in order not to break OSPMs. Lv Zheng.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=74021
Link: https://github.com/acpica/acpica/commit/4da56eea
Reported-and-tested-by: Oswald Buddenhagen <ossi@kde.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c04be18448355441a0c424362df65b6422e27bda upstream.
ACPICA commit 90f5332a15e9d9ba83831ca700b2b9f708274658
This patch adds a new FACS initialization flag for acpi_tb_initialize().
acpi_enable_subsystem() might be invoked several times in OS bootup process,
and we don't want FACS initialization to be invoked twice. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/90f5332a
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c04e1fb4396d27f18296db0f914760fa7fe8223a upstream.
ACPICA commit f7b86f35416e3d1f71c3d816ff5075ddd33ed486
The following commit is reported to have broken s2ram on some platforms:
Commit: 0249ed2444d65d65fc3f3f64f398f1ad0b7e54cd
ACPICA: Add option to favor 32-bit FADT addresses.
The platform reports 2 FACS tables (which is not allowed by ACPI
specification) and the new 32-bit address favor rule forces OSPMs to use
the FACS table reported via FADT's X_FIRMWARE_CTRL field.
The root cause of the reported bug might be one of the followings:
1. BIOS may favor the 64-bit firmware waking vector address when the
version of the FACS is greater than 0 and Linux currently only supports
resuming from the real mode, so the 64-bit firmware waking vector has
never been set and might be invalid to BIOS while the commit enables
higher version FACS.
2. BIOS may favor the FACS reported via the "FIRMWARE_CTRL" field in the
FADT while the commit doesn't set the firmware waking vector address of
the FACS reported by "FIRMWARE_CTRL", it only sets the firware waking
vector address of the FACS reported by "X_FIRMWARE_CTRL".
This patch excludes the cases that can trigger the bugs caused by the root
cause 2.
There is no handshaking mechanism can be used by OSPM to tell BIOS which
FACS is currently used. Thus the FACS reported by "FIRMWARE_CTRL" may still
be used by BIOS and the 0 value of the 32-bit firmware waking vector might
trigger such failure.
This patch tries to favor 32bit FACS address in another way where both the
FACS reported by "FIRMWARE_CTRL" and the FACS reported by "X_FIRMWARE_CTRL"
are loaded so that further commit can set firmware waking vector in the
both tables to ensure we can exclude the cases that trigger the bugs caused
by the root cause 2. The exclusion is split into 2 commits as this commit
is also useful for dumping more ACPI tables, it won't get reverted when
such exclusion is no longer necessary. Lv Zheng.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=74021
Link: https://github.com/acpica/acpica/commit/f7b86f35
Reported-and-tested-by: Oswald Buddenhagen <ossi@kde.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0294112ee3135fbd15eaa70015af8283642dd970 upstream.
This effectively reverts the following three commits:
7bc10388ccdd ACPI / resources: free memory on error in add_region_before()
0f1b414d1907 ACPI / PNP: Avoid conflicting resource reservations
b9a5e5e18fbf ACPI / init: Fix the ordering of acpi_reserve_resources()
(commit b9a5e5e18fbf introduced regressions some of which, but not
all, were addressed by commit 0f1b414d1907 and commit 7bc10388ccdd
was a fixup on top of the latter) and causes ACPI fixed hardware
resources to be reserved at the fs_initcall_sync stage of system
initialization.
The story is as follows. First, a boot regression was reported due
to an apparent resource reservation ordering change after a commit
that shouldn't lead to such changes. Investigation led to the
conclusion that the problem happened because acpi_reserve_resources()
was executed at the device_initcall() stage of system initialization
which wasn't strictly ordered with respect to driver initialization
(and with respect to the initialization of the pcieport driver in
particular), so a random change causing the device initcalls to be
run in a different order might break things.
The response to that was to attempt to run acpi_reserve_resources()
as soon as we knew that ACPI would be in use (commit b9a5e5e18fbf).
However, that turned out to be too early, because it caused resource
reservations made by the PNP system driver to fail on at least one
system and that failure was addressed by commit 0f1b414d1907.
That fix still turned out to be insufficient, though, because
calling acpi_reserve_resources() before the fs_initcall stage of
system initialization caused a boot regression to happen on the
eCAFE EC-800-H20G/S netbook. That meant that we only could call
acpi_reserve_resources() at the fs_initcall initialization stage
or later, but then we might just as well call it after the PNP
initalization in which case commit 0f1b414d1907 wouldn't be
necessary any more.
For this reason, the changes made by commit 0f1b414d1907 are reverted
(along with a memory leak fixup on top of that commit), the changes
made by commit b9a5e5e18fbf that went too far are reverted too and
acpi_reserve_resources() is changed into fs_initcall_sync, which
will cause it to be executed after the PNP subsystem initialization
(which is an fs_initcall) and before device initcalls (including
the pcieport driver initialization) which should avoid the initial
issue.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=100581
Link: http://marc.info/?t=143092384600002&r=1&w=2
Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831
Link: http://marc.info/?t=143389402600001&r=1&w=2
Fixes: b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()"
Reported-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 648a9bc5308d952f2c80772301b339f73026f013 upstream.
Since the hardware sometimes mysteriously totally flummoxes the 64bit
read of a 64bit register when read using a single instruction, split the
read into two instructions. Since the read here is of automatically
incrementing timestamp counters, we also have to be very careful in
order to make sure that it does not increment between the two
instructions.
However, since userspace tried to workaround this issue and so enshrined
this ABI for a broken hardware read and in the process neglected that
the read only fails in some environments, we have to introduce a new
uABI flag for userspace to request the 2x32 bit accurate read of the
timestamp.
v2: Fix alignment check and include details of the workaround for
userspace.
Reported-by: Karol Herbst <freedesktop@karolherbst.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91317
Testcase: igt/gem_reg_read
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Tested-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 60f207a5b6d8f23c2e8388b415e8d5c7311cc79d upstream.
for_each_*_in_state validate array index after
access to array elements, thus perform out of bounds read.
Fix this by validating index in the first place and read
array element iff validation was successful.
Fixes: df63b9994eaf ("drm/atomic: Add for_each_{connector,crtc,plane}_in_state helper macros")
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b8eeca65b18ae77e175cc2b6571731f0ee413bf upstream.
I've only seen this once, and I failed to capture the
lockdep backtrace, but I did some investigations.
If we are calling into the MST layer from EDID probing,
we have the mode_config mutex held, if during that EDID
probing, the MST hub goes away, then we can get a deadlock
where the connector destruction function in the driver
tries to retake the mode config mutex.
This offloads connector destruction to a workqueue,
and avoid the subsequenct lock ordering issue.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
limit
commit af34d637637eabaf49406eb35c948cd51ba262a6 upstream.
Since no longer limiting max_sectors to BLK_DEF_MAX_SECTORS (commit 34b48db66e08),
data corruption may occur on ST380013AS drive configured on 82801JI (ICH10 Family)
SATA controller. This patch will allow the driver to limit max_sectors as before
# cat /sys/block/sdb/queue/max_sectors_kb
512
I was able to double the max_sectors_kb value up to 16384 on linux-4.2.0-rc2
before seeing corruption, but seems safer to use previous limit. Without this
patch max_sectors_kb will be 32767.
tj: Minor comment update.
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 34b48db66e08 ("block: remove artifical max_hw_sectors cap")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 71d126fd28de2d4d9b7b2088dbccd7ca62fad6e0 upstream.
Some devices lose data on TRIM whether queued or not. This patch adds
a horkage to disable TRIM.
tj: Collapsed unnecessary if() nesting.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5d3abf8ff67f49271a42c0f7fa4f20f9e046bf0e upstream.
Some devices advertise support for the READ/WRITE LOG DMA EXT commands
but fail when we try to issue them. This can lead to queued TRIM being
unintentionally disabled since the relevant feature flag is located in a
general purpose log page.
Fall back to unqueued READ LOG EXT if the DMA variant fails while
reading a log page.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6f6a6fda294506dfe0e3e0a253bb2d2923f28f0a upstream.
If updating journal superblock fails after journal data has been
flushed, the error is omitted and this will mislead the caller as a
normal case. In ocfs2, the checkpoint will be treated successfully
and the other node can get the lock to update. Since the sb_start is
still pointing to the old log block, it will rewrite the journal data
during journal recovery by the other node. Thus the new updates will
be overwritten and ocfs2 corrupts. So in above case we have to return
the error, and ocfs2_commit_cache will take care of the error and
prevent the other node to do update first. And only after recovering
journal it can do the new updates.
The issue discussion mail can be found at:
https://oss.oracle.com/pipermail/ocfs2-devel/2015-June/010856.html
http://comments.gmane.org/gmane.comp.file-systems.ext4/48841
[ Fixed bug in patch which allowed a non-negative error return from
jbd2_cleanup_journal_tail() to leak out of jbd2_fjournal_flush(); this
was causing xfstests ext4/306 to fail. -- Ted ]
Reported-by: Yiwen Jiang <jiangyiwen@huawei.com>
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bd7ade3cd9b0850264306f5c2b79024a417b6396 upstream.
sb_getblk() is used during ext4 (and possibly other FSes) writeback
paths. Sometimes such path require allocating memory and guaranteeing
that such allocation won't block. Currently, however, there is no way
to provide user flags for sb_getblk which could lead to deadlocks.
This patch implements a sb_getblk_gfp with the only difference it can
accept user-provided GFP flags.
Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1e25aa9641e8f3fa39cd5e46b4afcafd7f12a44b upstream.
By default all the sensors are runtime suspended state (lowest power
state). During Linux suspend process, all the run time suspended
devices are resumed and then suspended. This caused all sensors to
power up and introduced delay in suspend time, when we introduced
runtime PM for HID sensors. The opposite process happens during resume
process.
To fix this, we do powerup process of the sensors only when the request
is issued from user (raw or tiggerred). In this way when runtime,
resume calls for powerup it will simply return as this will not match
user requested state.
Note this is a regression fix as the increase in suspend / resume
times can be substantial (report of 8 seconds on Len's laptop!)
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To avoid:
|BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:914
|in_atomic(): 1, irqs_disabled(): 0, pid: 92, name: rcuc/11
|2 locks held by rcuc/11/92:
| #0: (rcu_callback){......}, at: [<ffffffff810e037e>] rcu_cpu_kthread+0x3de/0x940
| #1: (rcu_read_lock_sched){......}, at: [<ffffffff81328390>] percpu_ref_call_confirm_rcu+0x0/0xd0
|Preemption disabled at:[<ffffffff813284e2>] percpu_ref_switch_to_atomic_rcu+0x82/0xc0
|CPU: 11 PID: 92 Comm: rcuc/11 Not tainted 3.18.7-rt0+ #1
| ffff8802398cdf80 ffff880235f0bc28 ffffffff815b3a12 0000000000000000
| 0000000000000000 ffff880235f0bc48 ffffffff8109aa16 0000000000000000
| ffff8802398cdf80 ffff880235f0bc78 ffffffff815b8dd4 000000000000df80
|Call Trace:
| [<ffffffff815b3a12>] dump_stack+0x4f/0x7c
| [<ffffffff8109aa16>] __might_sleep+0x116/0x190
| [<ffffffff815b8dd4>] rt_spin_lock+0x24/0x60
| [<ffffffff8108d2cd>] queue_work_on+0x6d/0x1d0
| [<ffffffff8110c881>] css_release+0x81/0x90
| [<ffffffff8132844e>] percpu_ref_call_confirm_rcu+0xbe/0xd0
| [<ffffffff813284e2>] percpu_ref_switch_to_atomic_rcu+0x82/0xc0
| [<ffffffff810e03e5>] rcu_cpu_kthread+0x445/0x940
| [<ffffffff81098a2d>] smpboot_thread_fn+0x18d/0x2d0
| [<ffffffff810948d8>] kthread+0xe8/0x100
| [<ffffffff815b9c3c>] ret_from_fork+0x7c/0xb0
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
It has become an obsession to mitigate the determinism vs. throughput
loss of RT. Looking at the mainline semantics of preemption points
gives a hint why RT sucks throughput wise for ordinary SCHED_OTHER
tasks. One major issue is the wakeup of tasks which are right away
preempting the waking task while the waking task holds a lock on which
the woken task will block right after having preempted the wakee. In
mainline this is prevented due to the implicit preemption disable of
spin/rw_lock held regions. On RT this is not possible due to the fully
preemptible nature of sleeping spinlocks.
Though for a SCHED_OTHER task preempting another SCHED_OTHER task this
is really not a correctness issue. RT folks are concerned about
SCHED_FIFO/RR tasks preemption and not about the purely fairness
driven SCHED_OTHER preemption latencies.
So I introduced a lazy preemption mechanism which only applies to
SCHED_OTHER tasks preempting another SCHED_OTHER task. Aside of the
existing preempt_count each tasks sports now a preempt_lazy_count
which is manipulated on lock acquiry and release. This is slightly
incorrect as for lazyness reasons I coupled this on
migrate_disable/enable so some other mechanisms get the same treatment
(e.g. get_cpu_light).
Now on the scheduler side instead of setting NEED_RESCHED this sets
NEED_RESCHED_LAZY in case of a SCHED_OTHER/SCHED_OTHER preemption and
therefor allows to exit the waking task the lock held region before
the woken task preempts. That also works better for cross CPU wakeups
as the other side can stay in the adaptive spinning loop.
For RT class preemption there is no change. This simply sets
NEED_RESCHED and forgoes the lazy preemption counter.
Initial test do not expose any observable latency increasement, but
history shows that I've been proven wrong before :)
The lazy preemption mode is per default on, but with
CONFIG_SCHED_DEBUG enabled it can be disabled via:
# echo NO_PREEMPT_LAZY >/sys/kernel/debug/sched_features
and reenabled via
# echo PREEMPT_LAZY >/sys/kernel/debug/sched_features
The test results so far are very machine and workload dependent, but
there is a clear trend that it enhances the non RT workload
performance.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The netfilter code relies only on the implicit semantics of
local_bh_disable() for serializing wt_write_recseq sections. RT breaks
that and needs explicit serialization here.
Reported-by: Peter LaDow <petela@gocougs.wsu.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Bringing a CPU down is a pain with the PREEMPT_RT kernel because
tasks can be preempted in many more places than in non-RT. In
order to handle per_cpu variables, tasks may be pinned to a CPU
for a while, and even sleep. But these tasks need to be off the CPU
if that CPU is going down.
Several synchronization methods have been tried, but when stressed
they failed. This is a new approach.
A sync_tsk thread is still created and tasks may still block on a
lock when the CPU is going down, but how that works is a bit different.
When cpu_down() starts, it will create the sync_tsk and wait on it
to inform that current tasks that are pinned on the CPU are no longer
pinned. But new tasks that are about to be pinned will still be allowed
to do so at this time.
Then the notifiers are called. Several notifiers will bring down tasks
that will enter these locations. Some of these tasks will take locks
of other tasks that are on the CPU. If we don't let those other tasks
continue, but make them block until CPU down is done, the tasks that
the notifiers are waiting on will never complete as they are waiting
for the locks held by the tasks that are blocked.
Thus we still let the task pin the CPU until the notifiers are done.
After the notifiers run, we then make new tasks entering the pinned
CPU sections grab a mutex and wait. This mutex is now a per CPU mutex
in the hotplug_pcp descriptor.
To help things along, a new function in the scheduler code is created
called migrate_me(). This function will try to migrate the current task
off the CPU this is going down if possible. When the sync_tsk is created,
all tasks will then try to migrate off the CPU going down. There are
several cases that this wont work, but it helps in most cases.
After the notifiers are called and if a task can't migrate off but enters
the pin CPU sections, it will be forced to wait on the hotplug_pcp mutex
until the CPU down is complete. Then the scheduler will force the migration
anyway.
Also, I found that THREAD_BOUND need to also be accounted for in the
pinned CPU, and the migrate_disable no longer treats them special.
This helps fix issues with ksoftirqd and workqueue that unbind on CPU down.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
If a low prio writer gets preempted while holding the seqlock write
locked, a high prio reader spins forever on RT.
To prevent this let the reader grab the spinlock, so it blocks and
eventually boosts the writer. This way the writer can proceed and
endless spinning is prevented.
For seqcount writers we disable preemption over the update code
path. Thanks to Al Viro for distangling some VFS code to make that
possible.
Nicholas Mc Guire:
- spin_lock+unlock => spin_unlock_wait
- __write_seqcount_begin => __raw_write_seqcount_begin
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Delegate the random insertion to the forced threaded interrupt
handler. Store the return IP of the hard interrupt handler in the irq
descriptor and feed it into the random generator as a source of
entropy.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
We hit the following bug with 3.6-rt:
[ 5.898990] BUG: scheduling while atomic: swapper/3/0/0x00000002
[ 5.898991] no locks held by swapper/3/0.
[ 5.898993] Modules linked in:
[ 5.898996] Pid: 0, comm: swapper/3 Not tainted 3.6.11-rt28.19.el6rt.x86_64.debug #1
[ 5.898997] Call Trace:
[ 5.899011] [<ffffffff810804e7>] __schedule_bug+0x67/0x90
[ 5.899028] [<ffffffff81577923>] __schedule+0x793/0x7a0
[ 5.899032] [<ffffffff810b4e40>] ? debug_rt_mutex_print_deadlock+0x50/0x200
[ 5.899034] [<ffffffff81577b89>] schedule+0x29/0x70
[ 5.899036] BUG: scheduling while atomic: swapper/7/0/0x00000002
[ 5.899037] no locks held by swapper/7/0.
[ 5.899039] [<ffffffff81578525>] rt_spin_lock_slowlock+0xe5/0x2f0
[ 5.899040] Modules linked in:
[ 5.899041]
[ 5.899045] [<ffffffff81579a58>] ? _raw_spin_unlock_irqrestore+0x38/0x90
[ 5.899046] Pid: 0, comm: swapper/7 Not tainted 3.6.11-rt28.19.el6rt.x86_64.debug #1
[ 5.899047] Call Trace:
[ 5.899049] [<ffffffff81578bc6>] rt_spin_lock+0x16/0x40
[ 5.899052] [<ffffffff810804e7>] __schedule_bug+0x67/0x90
[ 5.899054] [<ffffffff8157d3f0>] ? notifier_call_chain+0x80/0x80
[ 5.899056] [<ffffffff81577923>] __schedule+0x793/0x7a0
[ 5.899059] [<ffffffff812f2034>] acpi_os_acquire_lock+0x1f/0x23
[ 5.899062] [<ffffffff810b4e40>] ? debug_rt_mutex_print_deadlock+0x50/0x200
[ 5.899068] [<ffffffff8130be64>] acpi_write_bit_register+0x33/0xb0
[ 5.899071] [<ffffffff81577b89>] schedule+0x29/0x70
[ 5.899072] [<ffffffff8130be13>] ? acpi_read_bit_register+0x33/0x51
[ 5.899074] [<ffffffff81578525>] rt_spin_lock_slowlock+0xe5/0x2f0
[ 5.899077] [<ffffffff8131d1fc>] acpi_idle_enter_bm+0x8a/0x28e
[ 5.899079] [<ffffffff81579a58>] ? _raw_spin_unlock_irqrestore+0x38/0x90
[ 5.899081] [<ffffffff8107e5da>] ? this_cpu_load+0x1a/0x30
[ 5.899083] [<ffffffff81578bc6>] rt_spin_lock+0x16/0x40
[ 5.899087] [<ffffffff8144c759>] cpuidle_enter+0x19/0x20
[ 5.899088] [<ffffffff8157d3f0>] ? notifier_call_chain+0x80/0x80
[ 5.899090] [<ffffffff8144c777>] cpuidle_enter_state+0x17/0x50
[ 5.899092] [<ffffffff812f2034>] acpi_os_acquire_lock+0x1f/0x23
[ 5.899094] [<ffffffff8144d1a1>] cpuidle899101] [<ffffffff8130be13>] ?
As the acpi code disables interrupts in acpi_idle_enter_bm, and calls
code that grabs the acpi lock, it causes issues as the lock is currently
in RT a sleeping lock.
The lock was converted from a raw to a sleeping lock due to some
previous issues, and tests that showed it didn't seem to matter.
Unfortunately, it did matter for one of our boxes.
This patch converts the lock back to a raw lock. I've run this code on a
few of my own machines, one being my laptop that uses the acpi quite
extensively. I've been able to suspend and resume without issues.
[ tglx: Made the change exclusive for acpi_gbl_hardware_lock ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: John Kacur <jkacur@gmail.com>
Cc: Clark Williams <clark@redhat.com>
Link: http://lkml.kernel.org/r/1360765565.23152.5.camel@gandalf.local.home
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
The problem:
On -RT, an emulated LAPIC timer instances has the following path:
1) hard interrupt
2) ksoftirqd is scheduled
3) ksoftirqd wakes up vcpu thread
4) vcpu thread is scheduled
This extra context switch introduces unnecessary latency in the
LAPIC path for a KVM guest.
The solution:
Allow waking up vcpu thread from hardirq context,
thus avoiding the need for ksoftirqd to be scheduled.
Normal waitqueues make use of spinlocks, which on -RT
are sleepable locks. Therefore, waking up a waitqueue
waiter involves locking a sleeping lock, which
is not allowed from hard interrupt context.
cyclictest command line:
# cyclictest -m -n -q -p99 -l 1000000 -h60 -D 1m
This patch reduces the average latency in my tests from 14us to 11us.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
fixup highmem for ARM.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
In fact, with migrate_disable() existing one could play games with
kmap_atomic. You could save/restore the kmap_atomic slots on context
switch (if there are any in use of course), this should be esp easy now
that we have a kmap_atomic stack.
Something like the below.. it wants replacing all the preempt_disable()
stuff with pagefault_disable() && migrate_disable() of course, but then
you can flip kmaps around like below.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
[dvhart@linux.intel.com: build fix]
Link: http://lkml.kernel.org/r/1311842631.5890.208.camel@twins
[tglx@linutronix.de: Get rid of the per cpu variable and store the idx
and the pte content right away in the task struct.
Shortens the context switch code. ]
|
|
On 07/27/2011 04:37 PM, Thomas Gleixner wrote:
> - KGDB (not yet disabled) is reportedly unusable on -rt right now due
> to missing hacks in the console locking which I dropped on purpose.
>
To work around this in the short term you can use this patch, in
addition to the clocksource watchdog patch that Thomas brewed up.
Comments are welcome of course. Ultimately the right solution is to
change separation between the console and the HW to have a polled mode
+ work queue so as not to introduce any kind of latency.
Thanks,
Jason.
|
|
There are (probably rare) situations when a system crashed and the system
console becomes unresponsive but the network icmp layer still is alive.
Wouldn't it be wonderful, if we then could submit a sysreq command via ping?
This patch provides this facility. Please consult the updated documentation
Documentation/sysrq.txt for details.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
|
