| Age | Commit message (Collapse) | Author |
|---|
|
The magicmouse driver needs to setup the input mapping after reports are
parsed, but before device is registered, which actually can fail. So we
have change input_configured to return an integer.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
|
|
Not useful to have a separate, non-realtime workqueue for speed down
events, avoid priority inversion for speed up events.
Change-Id: Iddcd05545245c847aa1bbe0b8790092914c813d2
Signed-off-by: Todd Poynor <toddpoynor@google.com>
|
|
Change-Id: I71410aef7e03a52562f7cb15b993ac8441b1fa12
Signed-off-by: Erik Gilling <konkers@android.com>
|
|
Change-Id: I8a7ea63e454fbeee1ecf17e6c3caff7c43b24734
Signed-off-by: Erik Gilling <konkers@android.com>
|
|
Change-Id: I2ad855072b86873880769a09a3176e85aa1199d7
Signed-off-by: Erik Gilling <konkers@android.com>
|
|
Change-Id: I1042851f5e30f9fdc2f35bdad84123bcf108560f
Signed-off-by: Erik Gilling <konkers@android.com>
|
|
not run through checkpatch yet.
Change-Id: I209f9db2824e0313f467f11ab09e5f54f0a4a6b5
Signed-off-by: Erik Gilling <konkers@android.com>
|
|
Adds a new trace event to be called from clk_set_parent. Some
cpufreq drivers, including Tegra, reparent the cpu clock to a
slower clock while the main pll is relocking, tracing
clk_set_parent allows traces to show how for long the cpu is
running slower.
Uses a separate TRACE_EVENT instead of the clock event class to
allow the event to contain string names for the child and the
parent.
Signed-off-by: Colin Cross <ccross@android.com>
|
|
Send notifications when the label becomes active after an idle period.
Send netlink message notifications in addition to sysfs notifications.
Using a uevent with
subsystem=xt_idletimer
INTERFACE=...
STATE={active,inactive}
This is backport from common android-3.0
commit: beb914e987cbbd368988d2b94a6661cb907c4d5a
with uevent support instead of a new netlink message type.
Change-Id: I31677ef00c94b5f82c8457e5bf9e5e584c23c523
Signed-off-by: Ashish Sharma <ashishsharma@google.com>
Signed-off-by: JP Abgrall <jpa@google.com>
|
|
This is required to pass the headers_check
Change-Id: Ic4c773973278cbdf1cb4eb66473826cb96ccbfb3
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
|
|
Change-Id: Icf1e86d2065cc8f0816ba9c6b065eb056d4e8249
Signed-off-by: Todd Poynor <toddpoynor@google.com>
|
|
The explicit hint on/off version.
Change-Id: Ibf62b6d45bf6fb8c9c055b9bdaf074ce9374c04f
Signed-off-by: Todd Poynor <toddpoynor@google.com>
|
|
Based on previous patches by Tero Kristo <tero.kristo@nokia.com>,
Brian Steuer <bsteuer@codeaurora.org>,
David Ng <dave@codeaurora.org>,
Antti P Miettinen <amiettinen@nvidia.com>, and
Thomas Renninger <trenn@suse.de>
Change-Id: Ic55fedcf6f9310f43a7022fb88e23b0392122769
Signed-off-by: Todd Poynor <toddpoynor@google.com>
|
|
Change-Id: Ic13614a3da2faa2d4bd215ca3eb7191614f0cf66
Signed-off-by: Todd Poynor <toddpoynor@google.com>
|
|
USB accessory mode allows users to connect USB host hardware
specifically designed for Android-powered devices. The accessories
must adhere to the Android accessory protocol outlined in the
http://accessories.android.com documentation. This allows
Android devices that cannot act as a USB host to still interact with
USB hardware. When an Android device is in USB accessory mode, the
attached Android USB accessory acts as the host, provides power
to the USB bus, and enumerates connected devices.
Signed-off-by: Mike Lockwood <lockwood@android.com>
|
|
USB gadget function driver used by the Android framework to
implement the MTP and PTP protocols. It creates a character device
that provides an interface for fast transfer of files and
supports transferring files greater than 4GB.
Signed-off-by: Mike Lockwood <lockwood@android.com>
|
|
The original xt_quota in the kernel is plain broken:
- counts quota at a per CPU level
(was written back when ubiquitous SMP was just a dream)
- provides no way to count across IPV4/IPV6.
This patch is the original unaltered code from:
http://sourceforge.net/projects/xtables-addons
at commit e84391ce665cef046967f796dd91026851d6bbf3
Change-Id: I19d49858840effee9ecf6cff03c23b45a97efdeb
Signed-off-by: JP Abgrall <jpa@google.com>
|
|
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
|
|
This module allows tracking stats at the socket level for given UIDs.
It replaces xt_owner.
If the --uid-owner is not specified, it will just count stats based on
who the skb belongs to. This will even happen on incoming skbs as it
looks into the skb via xt_socket magic to see who owns it.
If an skb is lost, it will be assigned to uid=0.
To control what sockets of what UIDs are tagged by what, one uses:
echo t $sock_fd $accounting_tag $the_billed_uid \
> /proc/net/xt_qtaguid/ctrl
So whenever an skb belongs to a sock_fd, it will be accounted against
$the_billed_uid
and matching stats will show up under the uid with the given
$accounting_tag.
Because the number of allocations for the stats structs is not that big:
~500 apps * 32 per app
we'll just do it atomic. This avoids walking lists many times, and
the fancy worker thread handling. Slabs will grow when needed later.
It use netdevice and inetaddr notifications instead of hooks in the core dev
code to track when a device comes and goes. This removes the need for
exposed iface_stat.h.
Put procfs dirs in /proc/net/xt_qtaguid/
ctrl
stats
iface_stat/<iface>/...
The uid stats are obtainable in ./stats.
Change-Id: I01af4fd91c8de651668d3decb76d9bdc1e343919
Signed-off-by: JP Abgrall <jpa@google.com>
|
|
The socket matching function has some nifty logic to get the struct sock
from the skb or from the connection tracker.
We export this so other xt_* can use it, similarly to ho how
xt_socket uses nf_tproxy_get_sock.
Change-Id: I11c58f59087e7f7ae09e4abd4b937cd3370fa2fd
Signed-off-by: JP Abgrall <jpa@google.com>
|
|
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
|
|
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
|
|
PPP handles packet loss but does not work with out of order packets.
This change performs reordering of incoming data packets within a
sliding window of one second. Since sequence number is optional,
receiving a packet without it will drop all queued packets.
Currently the logic is triggered by incoming packets, so queued
packets have to wait till another packet is arrived. It is done for
simplicity since no additional locks or threads are required. For
reliable protocols, a retransmission will kick it. For unreliable
protocols, queued packets just seem like packet loss. Time-critical
protocols might be broken, but they never work with queueing anyway.
Signed-off-by: Chia-chi Yeh <chiachi@android.com>
|
|
This governor is designed for latency-sensitive workloads, such as
interactive user interfaces. The interactive governor aims to be
significantly more responsive to ramp CPU quickly up when CPU-intensive
activity begins.
Existing governors sample CPU load at a particular rate, typically
every X ms. This can lead to under-powering UI threads for the period of
time during which the user begins interacting with a previously-idle system
until the next sample period happens.
The 'interactive' governor uses a different approach. Instead of sampling
the CPU at a specified rate, the governor will check whether to scale the
CPU frequency up soon after coming out of idle. When the CPU comes out of
idle, a timer is configured to fire within 1-2 ticks. If the CPU is very
busy from exiting idle to when the timer fires then we assume the CPU is
underpowered and ramp to MAX speed.
If the CPU was not sufficiently busy to immediately ramp to MAX speed, then
the governor evaluates the CPU load since the last speed adjustment,
choosing the highest value between that longer-term load or the short-term
load since idle exit to determine the CPU speed to ramp to.
A realtime thread is used for scaling up, giving the remaining tasks the
CPU performance benefit, unlike existing governors which are more likely to
schedule rampup work to occur after your performance starved tasks have
completed.
The tuneables for this governor are:
/sys/devices/system/cpu/cpufreq/interactive/min_sample_time:
The minimum amount of time to spend at the current frequency before
ramping down. This is to ensure that the governor has seen enough
historic CPU load data to determine the appropriate workload.
Default is 80000 uS.
/sys/devices/system/cpu/cpufreq/interactive/go_maxspeed_load
The CPU load at which to ramp to max speed. Default is 85.
Change-Id: Ib2b362607c62f7c56d35f44a9ef3280f98c17585
Signed-off-by: Mike Chan <mike@android.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Bug: 3152864
|
|
Move the x86_64 idle notifiers originally by Andi Kleen and Venkatesh
Pallipadi to generic.
Change-Id: Idf29cda15be151f494ff245933c12462643388d5
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
|
|
Originally written by HTC. Contributions by Motorola and AKM.
misc: Import akm8975 from Motorola
Major style and code cleanups by Praveen Bharathi <pbharathi@motorola.com>
misc: akm8975: clean up code violations in akm8975.c
misc: akm8975: Clean up coding style, add suspend and resume
Change-Id: I4196913f15aec2dfbed47506d3dc085aada8e92d
Signed-off-by: Dima Zavin <dima@android.com>
|
|
When enabled, tracks the frequency of network transmissions
(inbound and outbound) and buckets them accordingly.
Buckets are determined by time between network activity.
Each bucket represents the number of network transmisions that were
N sec or longer apart. Where N is defined as 1 << bucket index.
This network pattern tracking is particularly useful for wireless
networks (ie: 3G) where batching network activity closely together
is more power efficient than far apart.
New file: /proc/net/stat/activity
output:
Min Bucket(sec) Count
1 7
2 0
4 1
8 0
16 0
32 2
64 1
128 0
Change-Id: I4c4cd8627b872a55f326b1715c51bc3bdd6e8d92
Signed-off-by: Mike Chan <mike@android.com>
|
|
This patch adds a notifier which can be used by subsystems that may
be interested in when a task has completely died and is about to
have it's last resource freed.
The Android lowmemory killer uses this to determine when a task
it has killed has finally given up its goods.
Signed-off-by: San Mehat <san@google.com>
|
|
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
|
|
This provides userspace debugging tools access to ACL flow control state.
Signed-off-by: Nick Pelly <npelly@google.com>
|
|
Legacy pairing is a bit of a problem because on the incoming end it is
impossible to know pairing has begun:
2009-09-18 18:29:24.115692 > HCI Event: Connect Request (0x04) plen 10
bdaddr 00:23:D4:04:51:7A class 0x58020c type ACL
2009-09-18 18:29:24.115966 < HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:23:D4:04:51:7A role 0x00
Role: Master
2009-09-18 18:29:24.117065 > HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
2009-09-18 18:29:24.282928 > HCI Event: Role Change (0x12) plen 8
status 0x00 bdaddr 00:23:D4:04:51:7A role 0x00
Role: Master
2009-09-18 18:29:24.291534 > HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 1 bdaddr 00:23:D4:04:51:7A type ACL encrypt 0x00
2009-09-18 18:29:24.291839 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 1
2009-09-18 18:29:24.292144 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
bdaddr 00:23:D4:04:51:7A mode 1
2009-09-18 18:29:24.293823 > HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
2009-09-18 18:29:24.303588 > HCI Event: Max Slots Change (0x1b) plen 3
handle 1 slots 5
2009-09-18 18:29:24.309448 > HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 1
Features: 0xff 0xff 0x2d 0xfe 0x9b 0xff 0x79 0x83
2009-09-18 18:29:24.345916 < HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:23:D4:04:51:7A mode 2 clkoffset 0x0000
2009-09-18 18:29:24.346923 > HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
2009-09-18 18:29:24.375793 > HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:23:D4:04:51:7A name 'test'
2009-09-18 18:29:34.332190 < HCI Command: Disconnect (0x01|0x0006) plen 3
handle 1 reason 0x13
There are some mainline patches such as "Add different pairing timeout for
Legacy Pairing" but they do not address the HCI sequence above.
I think the real solution is to avoid using CreateBond(), and instead make
the profile connection immediately. This way both sides will use a longer
timeout because there is a higher level connection in progress, and we will
not end up with the useless HCI sequence above.
Signed-off-by: Nick Pelly <npelly@google.com>
|
|
Add wake_peer which is called before starting UART TX. The idea here
is to provide a mechanism where we can wakeup our peer before sending
data.
Change-Id: I42e0779b635f64ca99184b45d5b028de80197491
Signed-off-by: San Mehat <san@google.com>
|
|
Signed-off-by: Nick Pelly <npelly@google.com>
|
|
Signed-off-by: Chia-chi Yeh <chiachi@android.com>
|
|
net: Fix a bitmask in PPPoPNS and rename constants in PPPoPNS and PPPoLAC.
Signed-off-by: Chia-chi Yeh <chiachi@android.com>
net: Fix a potential deadlock while releasing PPPoLAC/PPPoPNS socket.
PPP driver guarantees that no thread will be executing start_xmit() after
returning from ppp_unregister_channel(). To achieve this, a spinlock (downl)
is used. In pppolac_release(), ppp_unregister_channel() is called after sk_udp
is locked. At the same time, another thread might be running in pppolac_xmit()
with downl. Thus a deadlock will occur if the thread tries to lock sk_udp.
The same situation might happen on sk_raw in pppopns_release().
Signed-off-by: Chia-chi Yeh <chiachi@android.com>
net: Force PPPoLAC and PPPoPNS to bind an interface before creating PPP channel.
It is common to manipulate the routing table after configuring PPP device.
Since both PPPoLAC and PPPoPNS run over IP, care must be taken to make sure
that there is no loop in the routing table.
Although this can be done by adding a host route, it might still cause
problems when the interface is down for some reason.
To solve this, this patch forces both drivers to bind an interface before
creating PPP channel, so the system will not re-route the tunneling sockets
to another interface when the original one is down. Another benefit is that
now the host route is no longer required, so there is no need to remove it
when PPP channel is closed.
Signed-off-by: Chia-chi Yeh <chiachi@android.com>
net: Avoid sleep-inside-spinlock in PPPoLAC and PPPoPNS.
Since recv() and xmit() are called with a spinlock held, routines which might
sleep cannot be used. This issue is solved by following changes:
Incoming packets are now processed in backlog handler, recv_core(), instead of
recv(). Since backlog handler is always executed with socket spinlock held, the
requirement of ppp_input() is still satisfied.
Outgoing packets are now processed in workqueue handler, xmit_core(), instead of
xmit(). Note that kernel_sendmsg() is no longer used to prevent touching dead
sockets.
In release(), lock_sock() and pppox_unbind_sock() ensure that no thread is in
recv_core() or xmit(). Then socket handlers are restored before release_sock(),
so no packets will leak in backlog queue.
Signed-off-by: Chia-chi Yeh <chiachi@android.com>
net: Fix msg_iovlen in PPPoLAC and PPPoPNS.
Although any positive value should work (which is always true in both drivers),
the correct value should be 1.
Signed-off-by: Chia-chi Yeh <chiachi@android.com>
|
|
Signed-off-by: Chia-chi Yeh <chiachi@android.com>
ppopns: dont include px_proto define in if_pppopns.h
Change-Id: I27e687667db5b45182562f4a517a2e6cec6b1350
Signed-off-by: Dima Zavin <dima@android.com>
|
|
Change-Id: I3ae3ee7520951ae24269db0ef2898c6455cf6bcc
Signed-off-by: Chia-chi Yeh <chiachi@android.com>
ppolac: dont include px_proto define in if_pppolac.h
Change-Id: I55bc9cf91ea0e9e8f7bf5d6e241d188e1269343a
Signed-off-by: Dima Zavin <dima@android.com>
|
|
|
|
There is no need to take a wakelock for delayed lazy disable
work, it will be cancelled in the suspend handler and force
disabled. Only take the wakelock when the detect work is
queued, and make sure to drop the wakelock if the work is
cancelled.
Change-Id: I1e507a5f98848954ea21d45e23b6192c3132a349
Signed-off-by: Colin Cross <ccross@android.com>
|
|
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
|
|
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
|
|
A card driver can now specify that the underlying bus should *not*
auto-resume with the rest of the system. This is useful for reducing resume
latency as well as saving power when the card driver is not using the
bus. In the future, we'll add support for manual suspend
Signed-off-by: San Mehat <san@google.com>
|
|
|
|
This is required to support chips which use SDIO for signaling/
communication but do not implement the various card enumeration registers
as required for full SD / SDIO cards.
mmc: sdio: Fix bug where we're freeing the CIS tables we never allocated when using EMBEDDED_SDIO
mmc: Add max_blksize to embedded SDIO data
Signed-off-by: San Mehat <san@google.com>
|
|
Signed-off-by: San Mehat <san@google.com>
|
|
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Input: synaptics_i2c_rmi: disable_irq -> disable_irq_nosync
Also remove duplicate swap macro
Change-Id: I77266431ba5c267a5d92c4bdc2f127a5297065a8
Signed-off-by: Arve Hjønnevåg <arve@android.com>
|
|
This driver allows userspace to receive notification when client
specified key combinations are pressed.
The client opens /dev/keychord and writes a list of keychords
for the driver to monitor.
The client then reads or polls /dev/keychord for notifications.
A client specified ID for the keychord is returned from read()
when a keychord press is detected.
Signed-off-by: Mike Lockwood <lockwood@android.com>
keychord: fix to build without CONFIG_PREEMPT
Change-Id: I911f13aeda4224b6fa57863bc7e8972fec8837fb
|
|
Add a platform device in the board file to specify a reset key-combo.
The first time the key-combo is detected a work function that syncs
the filesystems is scheduled. If all the keys are released and then
pressed again, it calls panic. Reboot on panic should be set for
this to work.
Change-Id: I9d54283ca1fba45e4b1ae1a407524cdda8171143
Signed-off-by: Arve Hjønnevåg <arve@android.com>
|
|
Supports keyboard matrixces, direct inputs, direct outputs and axes connected to gpios.
Change-Id: I5e921e6e3a1cc169316ee3b665f4cc21b5735114
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Nick Pelly <npelly@google.com>
|
|
This reverts commit 01dc52ebdf472f77cca623ca693ca24cfc0f1bbe ("oom: remove
deprecated oom_adj"). Android userland still might need this, so we have
to revert it.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
|
