From f3ccc08c8cdeb784087348e67f41a779c787fa0e Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 5 May 2008 10:22:45 +0800 Subject: iwlwifi: move iwl4965_init_alive_start to iwl-4965.c This patch moves iwl_4965_init_alive_start to iwl-4965.c. Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 97 ++++++++++++++++++++++++++ drivers/net/wireless/iwlwifi/iwl-core.h | 2 + drivers/net/wireless/iwlwifi/iwl4965-base.c | 101 +--------------------------- 3 files changed, 100 insertions(+), 100 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 319ffe747a70..f56b9a91d78a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -222,6 +222,102 @@ static int iwl4965_load_bsm(struct iwl_priv *priv) return 0; } +/** + * iwl4965_set_ucode_ptrs - Set uCode address location + * + * Tell initialization uCode where to find runtime uCode. + * + * BSM registers initially contain pointers to initialization uCode. + * We need to replace them to load runtime uCode inst and data, + * and to save runtime data when powering down. + */ +static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv) +{ + dma_addr_t pinst; + dma_addr_t pdata; + unsigned long flags; + int ret = 0; + + /* bits 35:4 for 4965 */ + pinst = priv->ucode_code.p_addr >> 4; + pdata = priv->ucode_data_backup.p_addr >> 4; + + spin_lock_irqsave(&priv->lock, flags); + ret = iwl_grab_nic_access(priv); + if (ret) { + spin_unlock_irqrestore(&priv->lock, flags); + return ret; + } + + /* Tell bootstrap uCode where to find image to load */ + iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst); + iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata); + iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, + priv->ucode_data.len); + + /* Inst bytecount must be last to set up, bit 31 signals uCode + * that all new ptr/size info is in place */ + iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, + priv->ucode_code.len | BSM_DRAM_INST_LOAD); + iwl_release_nic_access(priv); + + spin_unlock_irqrestore(&priv->lock, flags); + + IWL_DEBUG_INFO("Runtime uCode pointers are set.\n"); + + return ret; +} + +/** + * iwl4965_init_alive_start - Called after REPLY_ALIVE notification received + * + * Called after REPLY_ALIVE notification received from "initialize" uCode. + * + * The 4965 "initialize" ALIVE reply contains calibration data for: + * Voltage, temperature, and MIMO tx gain correction, now stored in priv + * (3945 does not contain this data). + * + * Tell "initialize" uCode to go ahead and load the runtime uCode. +*/ +static void iwl4965_init_alive_start(struct iwl_priv *priv) +{ + /* Check alive response for "valid" sign from uCode */ + if (priv->card_alive_init.is_valid != UCODE_VALID_OK) { + /* We had an error bringing up the hardware, so take it + * all the way back down so we can try again */ + IWL_DEBUG_INFO("Initialize Alive failed.\n"); + goto restart; + } + + /* Bootstrap uCode has loaded initialize uCode ... verify inst image. + * This is a paranoid check, because we would not have gotten the + * "initialize" alive if code weren't properly loaded. */ + if (iwl_verify_ucode(priv)) { + /* Runtime instruction load was bad; + * take it all the way back down so we can try again */ + IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n"); + goto restart; + } + + /* Calculate temperature */ + priv->temperature = iwl4965_get_temperature(priv); + + /* Send pointers to protocol/runtime uCode image ... init code will + * load and launch runtime uCode, which will send us another "Alive" + * notification. */ + IWL_DEBUG_INFO("Initialization Alive received.\n"); + if (iwl4965_set_ucode_ptrs(priv)) { + /* Runtime instruction load won't happen; + * take it all the way back down so we can try again */ + IWL_DEBUG_INFO("Couldn't set up uCode pointers.\n"); + goto restart; + } + return; + +restart: + queue_work(priv->workqueue, &priv->restart); +} + static int is_fat_channel(__le32 rxon_flags) { return (rxon_flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK) || @@ -3724,6 +3820,7 @@ static struct iwl_lib_ops iwl4965_lib = { .rx_handler_setup = iwl4965_rx_handler_setup, .is_valid_rtc_data_addr = iwl4965_hw_valid_rtc_data_addr, .alive_notify = iwl4965_alive_notify, + .init_alive_start = iwl4965_init_alive_start, .load_ucode = iwl4965_load_bsm, .apm_ops = { .init = iwl4965_apm_init, diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 3a75dc6e35a2..08eccdefd72e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -110,6 +110,8 @@ struct iwl_lib_ops { void (*rx_handler_setup)(struct iwl_priv *priv); /* nic Tx fifo handling */ int (*disable_tx_fifo)(struct iwl_priv *priv); + /* alive notification after init uCode load */ + void (*init_alive_start)(struct iwl_priv *priv); /* alive notification */ int (*alive_notify)(struct iwl_priv *priv); /* check validity of rtc data address */ diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 8d06cf1a3193..2e976c3881e6 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -4162,105 +4162,6 @@ static int iwl4965_read_ucode(struct iwl_priv *priv) return ret; } - -/** - * iwl4965_set_ucode_ptrs - Set uCode address location - * - * Tell initialization uCode where to find runtime uCode. - * - * BSM registers initially contain pointers to initialization uCode. - * We need to replace them to load runtime uCode inst and data, - * and to save runtime data when powering down. - */ -static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv) -{ - dma_addr_t pinst; - dma_addr_t pdata; - int rc = 0; - unsigned long flags; - - /* bits 35:4 for 4965 */ - pinst = priv->ucode_code.p_addr >> 4; - pdata = priv->ucode_data_backup.p_addr >> 4; - - spin_lock_irqsave(&priv->lock, flags); - rc = iwl_grab_nic_access(priv); - if (rc) { - spin_unlock_irqrestore(&priv->lock, flags); - return rc; - } - - /* Tell bootstrap uCode where to find image to load */ - iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst); - iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata); - iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, - priv->ucode_data.len); - - /* Inst bytecount must be last to set up, bit 31 signals uCode - * that all new ptr/size info is in place */ - iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, - priv->ucode_code.len | BSM_DRAM_INST_LOAD); - - iwl_release_nic_access(priv); - - spin_unlock_irqrestore(&priv->lock, flags); - - IWL_DEBUG_INFO("Runtime uCode pointers are set.\n"); - - return rc; -} - -/** - * iwl4965_init_alive_start - Called after REPLY_ALIVE notification received - * - * Called after REPLY_ALIVE notification received from "initialize" uCode. - * - * The 4965 "initialize" ALIVE reply contains calibration data for: - * Voltage, temperature, and MIMO tx gain correction, now stored in priv - * (3945 does not contain this data). - * - * Tell "initialize" uCode to go ahead and load the runtime uCode. -*/ -static void iwl4965_init_alive_start(struct iwl_priv *priv) -{ - /* Check alive response for "valid" sign from uCode */ - if (priv->card_alive_init.is_valid != UCODE_VALID_OK) { - /* We had an error bringing up the hardware, so take it - * all the way back down so we can try again */ - IWL_DEBUG_INFO("Initialize Alive failed.\n"); - goto restart; - } - - /* Bootstrap uCode has loaded initialize uCode ... verify inst image. - * This is a paranoid check, because we would not have gotten the - * "initialize" alive if code weren't properly loaded. */ - if (iwl_verify_ucode(priv)) { - /* Runtime instruction load was bad; - * take it all the way back down so we can try again */ - IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n"); - goto restart; - } - - /* Calculate temperature */ - priv->temperature = iwl4965_get_temperature(priv); - - /* Send pointers to protocol/runtime uCode image ... init code will - * load and launch runtime uCode, which will send us another "Alive" - * notification. */ - IWL_DEBUG_INFO("Initialization Alive received.\n"); - if (iwl4965_set_ucode_ptrs(priv)) { - /* Runtime instruction load won't happen; - * take it all the way back down so we can try again */ - IWL_DEBUG_INFO("Couldn't set up uCode pointers.\n"); - goto restart; - } - return; - - restart: - queue_work(priv->workqueue, &priv->restart); -} - - /** * iwl4965_alive_start - called after REPLY_ALIVE notification received * from protocol/runtime uCode (initialization uCode's @@ -4586,7 +4487,7 @@ static void iwl4965_bg_init_alive_start(struct work_struct *data) return; mutex_lock(&priv->mutex); - iwl4965_init_alive_start(priv); + priv->cfg->ops->lib->init_alive_start(priv); mutex_unlock(&priv->mutex); } -- cgit v1.2.3