From 5492606dc39b2f1ce67cf718f09ade373a35f4eb Mon Sep 17 00:00:00 2001 From: Simon Wood Date: Thu, 31 Jan 2013 08:07:08 -0700 Subject: USB: HID: Steelseries SRW-S1 Add support for dials This patch to the SRW-S1 driver re-writes the HID descriptor to insert a section for the 3 dials on the device, previously these were contained within a 'Manufacturer Specific' usage page. Signed-off-by: Simon Wood Tested-by: John Murphy Signed-off-by: Jiri Kosina --- drivers/hid/hid-steelseries-srws1.c | 86 +++++++++++++++++++++++++++++++++++-- 1 file changed, 82 insertions(+), 4 deletions(-) (limited to 'drivers/hid') diff --git a/drivers/hid/hid-steelseries-srws1.c b/drivers/hid/hid-steelseries-srws1.c index 161917c91ca8..e95434d733eb 100644 --- a/drivers/hid/hid-steelseries-srws1.c +++ b/drivers/hid/hid-steelseries-srws1.c @@ -17,16 +17,94 @@ #include "hid-ids.h" +/* Fixed report descriptor for Steelseries SRW-S1 wheel controller + * + * The original descriptor hides the sensitivity and assists dials + * a custom vendor usage page. This inserts a patch to make them + * appear in the 'Generic Desktop' usage. + */ + +static __u8 steelseries_srws1_rdesc_fixed[] = { +0x05, 0x01, /* Usage Page (Desktop) */ +0x09, 0x08, /* Usage (MultiAxis), Changed */ +0xA1, 0x01, /* Collection (Application), */ +0xA1, 0x02, /* Collection (Logical), */ +0x95, 0x01, /* Report Count (1), */ +0x05, 0x01, /* Changed Usage Page (Desktop), */ +0x09, 0x30, /* Changed Usage (X), */ +0x16, 0xF8, 0xF8, /* Logical Minimum (-1800), */ +0x26, 0x08, 0x07, /* Logical Maximum (1800), */ +0x65, 0x14, /* Unit (Degrees), */ +0x55, 0x0F, /* Unit Exponent (15), */ +0x75, 0x10, /* Report Size (16), */ +0x81, 0x02, /* Input (Variable), */ +0x09, 0x31, /* Changed Usage (Y), */ +0x15, 0x00, /* Logical Minimum (0), */ +0x26, 0xFF, 0x03, /* Logical Maximum (1023), */ +0x75, 0x0C, /* Report Size (12), */ +0x81, 0x02, /* Input (Variable), */ +0x09, 0x32, /* Changed Usage (Z), */ +0x15, 0x00, /* Logical Minimum (0), */ +0x26, 0xFF, 0x03, /* Logical Maximum (1023), */ +0x75, 0x0C, /* Report Size (12), */ +0x81, 0x02, /* Input (Variable), */ +0x05, 0x01, /* Usage Page (Desktop), */ +0x09, 0x39, /* Usage (Hat Switch), */ +0x25, 0x07, /* Logical Maximum (7), */ +0x35, 0x00, /* Physical Minimum (0), */ +0x46, 0x3B, 0x01, /* Physical Maximum (315), */ +0x65, 0x14, /* Unit (Degrees), */ +0x75, 0x04, /* Report Size (4), */ +0x95, 0x01, /* Report Count (1), */ +0x81, 0x02, /* Input (Variable), */ +0x25, 0x01, /* Logical Maximum (1), */ +0x45, 0x01, /* Physical Maximum (1), */ +0x65, 0x00, /* Unit, */ +0x75, 0x01, /* Report Size (1), */ +0x95, 0x03, /* Report Count (3), */ +0x81, 0x01, /* Input (Constant), */ +0x05, 0x09, /* Usage Page (Button), */ +0x19, 0x01, /* Usage Minimum (01h), */ +0x29, 0x11, /* Usage Maximum (11h), */ +0x95, 0x11, /* Report Count (17), */ +0x81, 0x02, /* Input (Variable), */ + /* ---- Dial patch starts here ---- */ +0x05, 0x01, /* Usage Page (Desktop), */ +0x09, 0x33, /* Usage (RX), */ +0x75, 0x04, /* Report Size (4), */ +0x95, 0x02, /* Report Count (2), */ +0x15, 0x00, /* Logical Minimum (0), */ +0x25, 0x0b, /* Logical Maximum (b), */ +0x81, 0x02, /* Input (Variable), */ +0x09, 0x35, /* Usage (RZ), */ +0x75, 0x04, /* Report Size (4), */ +0x95, 0x01, /* Report Count (1), */ +0x25, 0x03, /* Logical Maximum (3), */ +0x81, 0x02, /* Input (Variable), */ + /* ---- Dial patch ends here ---- */ +0x06, 0x00, 0xFF, /* Usage Page (FF00h), */ +0x09, 0x01, /* Usage (01h), */ +0x75, 0x04, /* Changed Report Size (4), */ +0x95, 0x0D, /* Changed Report Count (13), */ +0x81, 0x02, /* Input (Variable), */ +0xC0, /* End Collection, */ +0xA1, 0x02, /* Collection (Logical), */ +0x09, 0x02, /* Usage (02h), */ +0x75, 0x08, /* Report Size (8), */ +0x95, 0x10, /* Report Count (16), */ +0x91, 0x02, /* Output (Variable), */ +0xC0, /* End Collection, */ +0xC0 /* End Collection */ +}; + static __u8 *steelseries_srws1_report_fixup(struct hid_device *hdev, __u8 *rdesc, unsigned int *rsize) { if (*rsize >= 115 && rdesc[11] == 0x02 && rdesc[13] == 0xc8 && rdesc[29] == 0xbb && rdesc[40] == 0xc5) { hid_info(hdev, "Fixing up Steelseries SRW-S1 report descriptor\n"); - rdesc[11] = 0x01; - rdesc[13] = 0x30; - rdesc[29] = 0x31; - rdesc[40] = 0x32; + rdesc = steelseries_srws1_rdesc_fixed; + *rsize = sizeof(steelseries_srws1_rdesc_fixed); } return rdesc; } -- cgit v1.2.3