/****************************************************************************** * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, * USA * * The full GNU General Public License is included in this distribution * in the file called COPYING. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * * BSD LICENSE * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *****************************************************************************/ #include #include "iwl-trans.h" #include "iwl-op-mode.h" #include "iwl-fw.h" #include "iwl-debug.h" #include "iwl-csr.h" /* for iwl_mvm_rx_card_state_notif */ #include "iwl-io.h" /* for iwl_mvm_rx_card_state_notif */ #include "iwl-eeprom-parse.h" #include "mvm.h" #include "iwl-phy-db.h" #define MVM_UCODE_ALIVE_TIMEOUT HZ #define MVM_UCODE_CALIB_TIMEOUT (2*HZ) #define UCODE_VALID_OK cpu_to_le32(0x1) struct iwl_mvm_alive_data { bool valid; u32 scd_base_addr; }; static inline const struct fw_img * iwl_get_ucode_image(struct iwl_mvm *mvm, enum iwl_ucode_type ucode_type) { if (ucode_type >= IWL_UCODE_TYPE_MAX) return NULL; return &mvm->fw->img[ucode_type]; } static int iwl_send_tx_ant_cfg(struct iwl_mvm *mvm, u8 valid_tx_ant) { struct iwl_tx_ant_cfg_cmd tx_ant_cmd = { .valid = cpu_to_le32(valid_tx_ant), }; IWL_DEBUG_FW(mvm, "select valid tx ant: %u\n", valid_tx_ant); return iwl_mvm_send_cmd_pdu(mvm, TX_ANT_CONFIGURATION_CMD, CMD_SYNC, sizeof(tx_ant_cmd), &tx_ant_cmd); } static bool iwl_alive_fn(struct iwl_notif_wait_data *notif_wait, struct iwl_rx_packet *pkt, void *data) { struct iwl_mvm *mvm = container_of(notif_wait, struct iwl_mvm, notif_wait); struct iwl_mvm_alive_data *alive_data = data; struct mvm_alive_resp *palive; palive = (void *)pkt->data; mvm->error_event_table = le32_to_cpu(palive->error_event_table_ptr); mvm->log_event_table = le32_to_cpu(palive->log_event_table_ptr); alive_data->scd_base_addr = le32_to_cpu(palive->scd_base_ptr); alive_data->valid = le16_to_cpu(palive->status) == IWL_ALIVE_STATUS_OK; IWL_DEBUG_FW(mvm, "Alive ucode status 0x%04x revision 0x%01X 0x%01X flags 0x%01X\n", le16_to_cpu(palive->status), palive->ver_type, palive->ver_subtype, palive->flags); return true; } static bool iwl_wait_phy_db_entry(struct iwl_notif_wait_data *notif_wait, struct iwl_rx_packet *pkt, void *data) { struct iwl_phy_db *phy_db = data; if (pkt->hdr.cmd != CALIB_RES_NOTIF_PHY_DB) { WARN_ON(pkt->hdr.cmd != INIT_COMPLETE_NOTIF); return true; } WARN_ON(iwl_phy_db_set_section(phy_db, pkt, GFP_ATOMIC)); return false; } static int iwl_mvm_load_ucode_wait_alive(struct iwl_mvm *mvm, enum iwl_ucode_type ucode_type) { struct iwl_notification_wait alive_wait; struct iwl_mvm_alive_data alive_data; const struct fw_img *fw; int ret, i; enum iwl_ucode_type old_type = mvm->cur_ucode; static const u8 alive_cmd[] = { MVM_ALIVE }; fw = iwl_get_ucode_image(mvm, ucode_type); if (WARN_ON(!fw)) return -EINVAL; mvm->cur_ucode = ucode_type; mvm->ucode_loaded = false; iwl_init_notification_wait(&mvm->notif_wait, &alive_wait, alive_cmd, ARRAY_SIZE(alive_cmd), iwl_alive_fn, &alive_data); ret = iwl_trans_start_fw(mvm->trans, fw, ucode_type == IWL_UCODE_INIT); if (ret) { mvm->cur_ucode = old_type; iwl_remove_notification(&mvm->notif_wait, &alive_wait); return ret; } /* * Some things may run in the background now, but we * just wait for the ALIVE notification here. */ ret = iwl_wait_notification(&mvm->notif_wait, &alive_wait, MVM_UCODE_ALIVE_TIMEOUT); if (ret) { mvm->cur_ucode = old_type; return ret; } if (!alive_data.valid) { IWL_ERR(mvm, "Loaded ucode is not valid!\n"); mvm->cur_ucode = old_type; return -EIO; } iwl_trans_fw_alive(mvm->trans, alive_data.scd_base_addr); /* * Note: all the queues are enabled as part of the interface * initialization, but in firmware restart scenarios they * could be stopped, so wake them up. In firmware restart, * mac80211 will have the queues stopped as well until the * reconfiguration completes. During normal startup, they * will be empty. */ for (i = 0; i < IWL_MAX_HW_QUEUES; i++) { if (i < mvm->first_agg_queue && i != IWL_MVM_CMD_QUEUE) mvm->queue_to_mac80211[i] = i; else mvm->queue_to_mac80211[i] = IWL_INVALID_MAC80211_QUEUE; atomic_set(&mvm->queue_stop_count[i], 0); } mvm->transport_queue_stop = 0; mvm->ucode_loaded = true; return 0; } static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm) { struct iwl_phy_cfg_cmd phy_cfg_cmd; enum iwl_ucode_type ucode_type = mvm->cur_ucode; /* Set parameters */ phy_cfg_cmd.phy_cfg = cpu_to_le32(mvm->fw->phy_config); phy_cfg_cmd.calib_control.event_trigger = mvm->fw->default_calib[ucode_type].event_trigger; phy_cfg_cmd.calib_control.flow_trigger = mvm->fw->default_calib[ucode_type].flow_trigger; IWL_DEBUG_INFO(mvm, "Sending Phy CFG command: 0x%x\n", phy_cfg_cmd.phy_cfg); return iwl_mvm_send_cmd_pdu(mvm, PHY_CONFIGURATION_CMD, CMD_SYNC, sizeof(phy_cfg_cmd), &phy_cfg_cmd); } int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) { struct iwl_notification_wait calib_wait; static const u8 init_complete[] = { INIT_COMPLETE_NOTIF, CALIB_RES_NOTIF_PHY_DB }; int ret; lockdep_assert_held(&mvm->mutex); if (WARN_ON_ONCE(mvm->init_ucode_complete)) return 0; iwl_init_notification_wait(&mvm->notif_wait, &calib_wait, init_complete, ARRAY_SIZE(init_complete), iwl_wait_phy_db_entry, mvm->phy_db); /* Will also start the device */ ret = iwl_mvm_load_ucode_wait_alive(mvm, IWL_UCODE_INIT); if (ret) { IWL_ERR(mvm, "Failed to start INIT ucode: %d\n", ret); goto error; } ret = iwl_send_bt_prio_tbl(mvm); if (ret) goto error; /* Read the NVM only at driver load time, no need to do this twice */ if (read_nvm) { /* Read nvm */ ret = iwl_nvm_init(mvm); if (ret) { IWL_ERR(mvm, "Failed to read NVM: %d\n", ret); goto error; } } /* In case we read the NVM from external file, load it to the NIC */ if (iwlwifi_mod_params.nvm_file) iwl_mvm_load_nvm_to_nic(mvm); ret = iwl_nvm_check_version(mvm->nvm_data, mvm->trans); WARN_ON(ret); /* * abort after reading the nvm in case RF Kill is on, we will complete * the init seq later when RF kill will switch to off */ if (iwl_mvm_is_radio_killed(mvm)) { IWL_DEBUG_RF_KILL(mvm, "jump over all phy activities due to RF kill\n"); iwl_remove_notification(&mvm->notif_wait, &calib_wait); ret = 1; goto out; } /* Send TX valid antennas before triggering calibrations */ ret = iwl_send_tx_ant_cfg(mvm, iwl_fw_valid_tx_ant(mvm->fw)); if (ret) goto error; /* * Send phy configurations command to init uCode * to start the 16.0 uCode init image internal calibrations. */ ret = iwl_send_phy_cfg_cmd(mvm); if (ret) { IWL_ERR(mvm, "Failed to run INIT calibrations: %d\n", ret); goto error; } /* * Some things may run in the background now, but we * just wait for the calibration complete notification. */ ret = iwl_wait_notification(&mvm->notif_wait, &calib_wait, MVM_UCODE_CALIB_TIMEOUT); if (!ret) mvm->init_ucode_complete = true; goto out; error: iwl_remove_notification(&mvm->notif_wait, &calib_wait); out: if (iwlmvm_mod_params.init_dbg && !mvm->nvm_data) { /* we want to debug INIT and we have no NVM - fake */ mvm->nvm_data = kzalloc(sizeof(struct iwl_nvm_data) + sizeof(struct ieee80211_channel) + sizeof(struct ieee80211_rate), GFP_KERNEL); if (!mvm->nvm_data) return -ENOMEM; mvm->nvm_data->valid_rx_ant = 1; mvm->nvm_data->valid_tx_ant = 1; mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels; mvm->nvm_data->bands[0].n_channels = 1; mvm->nvm_data->bands[0].n_bitrates = 1; mvm->nvm_data->bands[0].bitrates = (void *)mvm->nvm_data->channels + 1; mvm->nvm_data->bands[0].bitrates->hw_value = 10; } return ret; } #define UCODE_CALIB_TIMEOUT (2*HZ) int iwl_mvm_up(struct iwl_mvm *mvm) { int ret, i; struct ieee80211_channel *chan; struct cfg80211_chan_def chandef; lockdep_assert_held(&mvm->mutex); ret = iwl_trans_start_hw(mvm->trans); if (ret) return ret; /* * If we haven't completed the run of the init ucode during * module loading, load init ucode now * (for example, if we were in RFKILL) */ if (!mvm->init_ucode_complete) { ret = iwl_run_init_mvm_ucode(mvm, false); if (ret && !iwlmvm_mod_params.init_dbg) { IWL_ERR(mvm, "Failed to run INIT ucode: %d\n", ret); /* this can't happen */ if (WARN_ON(ret > 0)) ret = -ERFKILL; goto error; } if (!iwlmvm_mod_params.init_dbg) { /* * should stop and start HW since that INIT * image just loaded */ iwl_trans_stop_device(mvm->trans); ret = iwl_trans_start_hw(mvm->trans); if (ret) return ret; } } if (iwlmvm_mod_params.init_dbg) return 0; ret = iwl_mvm_load_ucode_wait_alive(mvm, IWL_UCODE_REGULAR); if (ret) { IWL_ERR(mvm, "Failed to start RT ucode: %d\n", ret); goto error; } ret = iwl_mvm_sf_update(mvm, NULL, false); if (ret) IWL_ERR(mvm, "Failed to initialize Smart Fifo\n"); ret = iwl_send_tx_ant_cfg(mvm, iwl_fw_valid_tx_ant(mvm->fw)); if (ret) goto error; ret = iwl_send_bt_prio_tbl(mvm); if (ret) goto error; ret = iwl_send_bt_init_conf(mvm); if (ret) goto error; /* Send phy db control command and then phy db calibration*/ ret = iwl_send_phy_db_data(mvm->phy_db); if (ret) goto error; ret = iwl_send_phy_cfg_cmd(mvm); if (ret) goto error; /* init the fw <-> mac80211 STA mapping */ for (i = 0; i < IWL_MVM_STATION_COUNT; i++) RCU_INIT_POINTER(mvm->fw_id_to_mac_id[i], NULL); /* Add auxiliary station for scanning */ ret = iwl_mvm_add_aux_sta(mvm); if (ret) goto error; /* Add all the PHY contexts */ chan = &mvm->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->channels[0]; cfg80211_chandef_create(&chandef, chan, NL80211_CHAN_NO_HT); for (i = 0; i < NUM_PHY_CTX; i++) { /* * The channel used here isn't relevant as it's * going to be overwritten in the other flows. * For now use the first channel we have. */ ret = iwl_mvm_phy_ctxt_add(mvm, &mvm->phy_ctxts[i], &chandef, 1, 1); if (ret) goto error; } ret = iwl_mvm_power_update_device_mode(mvm); if (ret) goto error; IWL_DEBUG_INFO(mvm, "RT uCode started.\n"); return 0; error: iwl_trans_stop_device(mvm->trans); return ret; } int iwl_mvm_load_d3_fw(struct iwl_mvm *mvm) { int ret, i; lockdep_assert_held(&mvm->mutex); ret = iwl_trans_start_hw(mvm->trans); if (ret) return ret; ret = iwl_mvm_load_ucode_wait_alive(mvm, IWL_UCODE_WOWLAN); if (ret) { IWL_ERR(mvm, "Failed to start WoWLAN firmware: %d\n", ret); goto error; } ret = iwl_send_tx_ant_cfg(mvm, iwl_fw_valid_tx_ant(mvm->fw)); if (ret) goto error; /* Send phy db control command and then phy db calibration*/ ret = iwl_send_phy_db_data(mvm->phy_db); if (ret) goto error; ret = iwl_send_phy_cfg_cmd(mvm); if (ret) goto error; /* init the fw <-> mac80211 STA mapping */ for (i = 0; i < IWL_MVM_STATION_COUNT; i++) RCU_INIT_POINTER(mvm->fw_id_to_mac_id[i], NULL); /* Add auxiliary station for scanning */ ret = iwl_mvm_add_aux_sta(mvm); if (ret) goto error; return 0; error: iwl_trans_stop_device(mvm->trans); return ret; } int iwl_mvm_rx_card_state_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, struct iwl_device_cmd *cmd) { struct iwl_rx_packet *pkt = rxb_addr(rxb); struct iwl_card_state_notif *card_state_notif = (void *)pkt->data; u32 flags = le32_to_cpu(card_state_notif->flags); IWL_DEBUG_RF_KILL(mvm, "Card state received: HW:%s SW:%s CT:%s\n", (flags & HW_CARD_DISABLED) ? "Kill" : "On", (flags & SW_CARD_DISABLED) ? "Kill" : "On", (flags & CT_KILL_CARD_DISABLED) ? "Reached" : "Not reached"); return 0; } int iwl_mvm_rx_radio_ver(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, struct iwl_device_cmd *cmd) { struct iwl_rx_packet *pkt = rxb_addr(rxb); struct iwl_radio_version_notif *radio_version = (void *)pkt->data; /* TODO: what to do with that? */ IWL_DEBUG_INFO(mvm, "Radio version: flavor: 0x%08x, step 0x%08x, dash 0x%08x\n", le32_to_cpu(radio_version->radio_flavor), le32_to_cpu(radio_version->radio_step), le32_to_cpu(radio_version->radio_dash)); return 0; }