aboutsummaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)Author
2012-05-01ktest: Fix reboot on success stopping all rebootsSteven Rostedt
The change to let individual tests decide to reboot the machine on success of the entire test also prevented errors from rebooting when an error was detected. The "no_reboot" variable was only cleared if the test had reboot_on_success set. But the no_reboot variable also prevents the test rebooting when an error was detected even when REBOOT_ON_ERROR was set. Add a new "reboot_success" variable that is used to determine if the test should reboot on success and not touch the no_reboot variable. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-01ktest.pl: Fix combined usage of BISECT_REVERSE and BISECT_SKIPRuss Dill
When BISECT_REVERSE and BISECT_SKIP are used together with boot or test testing, build failures are treated as boot or test failures and 'git bisect bad' is executed instead of 'git bisect skip'. This is because the $ret value of -1 is treated as a build failure, but the $reverse_bisect logic does not properly handle this. Simple fix, only invert it if it is positive. Link: http://lkml.kernel.org/r/1335235380-8509-1-git-send-email-Russ.Dill@ti.com Signed-off-by: Russ Dill <Russ.Dill@ti.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-28mm: move hugepage test examples to tools/testing/selftests/vmDave Young
hugepage-mmap.c, hugepage-shm.c and map_hugetlb.c in Documentation/vm are simple pass/fail tests, It's better to promote them to tools/testing/selftests. Thanks suggestion of Andrew Morton about this. They all need firstly setting up proper nr_hugepages and hugepage-mmap need to mount hugetlbfs. So I add a shell script run_vmtests to do such work which will call the three test programs and check the return value of them. Changes to original code including below: a. add run_vmtests script b. return error when read_bytes mismatch with writed bytes. c. coding style fixes: do not use assignment in if condition [akpm@linux-foundation.org: build the targets before trying to execute them] [akpm@linux-foundation.org: Documentation/vm/ no longer has a Makefile. Fixes "make clean"] Signed-off-by: Dave Young <dyoung@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28selftests/Makefile: make `run_tests' depend on `all'Andrew Morton
So a "make run_tests" will build the tests before trying to run them. Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28selftests: launch individual selftests from the main MakefileFrederic Weisbecker
Remove the run_tests script and launch the selftests by calling "make run_tests" from the selftests top directory instead. This delegates to the Makefile in each selftest directory, where it is decided how to launch the local test. This removes the need to add each selftest directory to the now removed "run_tests" top script. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Dave Young <dyoung@redhat.com> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23Merge tag 'ktest-v3.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull ktest changes from Steven Rostedt. * tag 'ktest-v3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Allow a test to override REBOOT_ON_SUCCESS ktest: Fix SWITCH_TO_GOOD to also reboot the machine ktest: Add SCP_TO_TARGET_INSTALL option ktest: Add warning when bugs are ignored ktest: Add INSTALL_MOD_STRIP=1 when installing modules
2012-03-21ktest: Allow a test to override REBOOT_ON_SUCCESSSteven Rostedt
The option REBOOT_ON_SUCCESS is global, and will have the machine reboot the the box if all tests are successful. But a test may not want the machine to reboot, and perhaps have the kernel it loaded be used to install the next kernel. Or the last test may set up a kernel that the user may want to look at. In this case, the user could have the global option REBOOT_ON_SUCCESS be true, but if a test is defined to run at the end, that test can override the global option and keep the kernel it installed for the user to log in with. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21ktest: Fix SWITCH_TO_GOOD to also reboot the machineSteven Rostedt
When the option SWITCH_TO_GOOD is set, it will be called when the system needs to reboot to the good server. But currently, this keeps the reboot from happening. The SWITCH_TO_GOOD is just a way to get to a new kernel, it may not mean to not reboot. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21ktest: Add SCP_TO_TARGET_INSTALL optionSteven Rostedt
Currently the option used to scp both the modules to the target as well as the kernel image are the same (SCP_TO_TARGET). But some embedded boards may require them to be different. The modules may need to be put directly on the board, but the kernel image may need to go to a tftpserver. Add the option SCP_TO_TARGET_INSTALL that will allow the user to change the config so that they may have the modules and image got to different machines. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21ktest: Add warning when bugs are ignoredSteven Rostedt
When IGNORE_ERRORS is set, ktest will not fail a test if a backtrace is detected. But this can be an issue if the user added it in the config but forgot to remove it. They may be left wondering why their test did not fail, or even worse, why their bisect gave the wrong commit. Add a warning in the output if IGNORE_WARNINGS is set, and ktest detects a kernel error. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-21ktest: Add INSTALL_MOD_STRIP=1 when installing modulesSteven Rostedt
To keep the modules from bloating the target's filesystem strip them during the install. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-03-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "It's indeed trivial -- mostly documentation updates and a bunch of typo fixes from Masanari. There are also several linux/version.h include removals from Jesper." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits) kcore: fix spelling in read_kcore() comment constify struct pci_dev * in obvious cases Revert "char: Fix typo in viotape.c" init: fix wording error in mm_init comment usb: gadget: Kconfig: fix typo for 'different' Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c" writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header writeback: fix typo in the writeback_control comment Documentation: Fix multiple typo in Documentation tpm_tis: fix tis_lock with respect to RCU Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c" Doc: Update numastat.txt qla4xxx: Add missing spaces to error messages compiler.h: Fix typo security: struct security_operations kerneldoc fix Documentation: broken URL in libata.tmpl Documentation: broken URL in filesystems.tmpl mtd: simplify return logic in do_map_probe() mm: fix comment typo of truncate_inode_pages_range power: bq27x00: Fix typos in comment ...
2012-02-27Merge tag 'ktest-fix-make-min-failed-build-for-real' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest While demoing ktest at ELC in 2012, it was embarrassing that the make_min_config test failed to work because the snowball board I was testing it against had a config that would not build. But the make_min_config only tested the testing part and ignored build failures. The end result was a config file that would not boot. This time, for real. * tag 'ktest-fix-make-min-failed-build-for-real' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Fix make_min_config test when build fails
2012-02-27ktest: Fix make_min_config test when build failsSteven Rostedt
The make_min_config does not take into account when the build fails, resulting in a invalid MIN_CONFIG .config file. When the build fails, it is ignored and the boot test is executed, using the previous built kernel. The configs that should be tested are not tested and they may be added or removed depending on the result of the last kernel that succeeded to be built. If the build fails, mark the current config as a failure and the configs that were disabled may still be needed. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-21tools: Fix typo in ktest.plMasanari Iida
Correct spelling "faied" to "failed" in tools/testing/ktest/ktest.pl Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Add INGORE_ERRORS to ignore warnings in boot up ktest: Still do reboot even for REBOOT_TYPE = script ktest: Fix compare script to test if options are not documented ktest: Detect typos in option names ktest: Have all values be set by defaults ktest: Change initialization of defaults hash to perl format ktest: Add options SWITCH_TO_GOOD and SWITCH_TO_TEST ktest: Allow overriding bisect test results ktest: Evaluate options before processing them ktest: Evaluate $KERNEL_VERSION in both install and post install ktest: Only ask options needed for install ktest: When creating a new config, ask for BUILD_OPTIONS ktest: Do not ask for some options if the only test is build ktest: Ask for type of test when creating a new config ktest: Allow bisect test to restart where it left off ktest: When creating new config, allow the use of ${THIS_DIR} ktest: Add default for ssh-user, build-target and target-image ktest: Allow success logs to be stored ktest: Save test output
2012-01-12selftests: new x86 breakpoints selftestFrederic Weisbecker
Bring a first selftest in the relevant directory. This tests several combinations of breakpoints and watchpoints in x86, as well as icebp traps and int3 traps. Given the amount of breakpoint regressions we raised after we merged the generic breakpoint infrastructure, such selftest became necessary and can still serve today as a basis for new patches that touch the do_debug() path. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12selftests: new very basic kernel selftests directoryFrederic Weisbecker
Bring a new kernel selftests directory in tools/testing/selftests. To add a new selftest, create a subdirectory with the sources and a makefile that creates a target named "run_test" then add the subdirectory name to the TARGET var in tools/testing/selftests/Makefile and tools/testing/selftests/run_tests script. This can help centralizing and maintaining any useful selftest that developers usually tend to let rust in peace on some random server. Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits) Kconfig: acpi: Fix typo in comment. misc latin1 to utf8 conversions devres: Fix a typo in devm_kfree comment btrfs: free-space-cache.c: remove extra semicolon. fat: Spelling s/obsolate/obsolete/g SCSI, pmcraid: Fix spelling error in a pmcraid_err() call tools/power turbostat: update fields in manpage mac80211: drop spelling fix types.h: fix comment spelling for 'architectures' typo fixes: aera -> area, exntension -> extension devices.txt: Fix typo of 'VMware'. sis900: Fix enum typo 'sis900_rx_bufer_status' decompress_bunzip2: remove invalid vi modeline treewide: Fix comment and string typo 'bufer' hyper-v: Update MAINTAINERS treewide: Fix typos in various parts of the kernel, and fix some comments. clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR gpio: Kconfig: drop unknown symbol 'CS5535_GPIO' leds: Kconfig: Fix typo 'D2NET_V2' sound: Kconfig: drop unknown symbol ARCH_CLPS7500 ... Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new kconfig additions, close to removed commented-out old ones)
2012-01-04ktest: Add INGORE_ERRORS to ignore warnings in boot upSteven Rostedt
When testing a kernel that has warnings, ktest.pl will fail the test when it sees the warning. If you need to test the the kernel and want to ignore the errors that are produced, the option IGNORE_ERRORS has been added. When IGNORE_ERRORS is set to something other than 0, it will ignore call traces due to WARN_ON(). Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-01-04ktest: Still do reboot even for REBOOT_TYPE = scriptSteven Rostedt
The REBOOT_TYPE may be either grub or script, if it is script it is expected that a REBOOT_SCRIPT is defined. With the SWITCH_TO_TEST which is the complement of SWITCH_TO_GOOD, which does basically the same thing as REBOOT_SCRIPT and but for both grub and script, the REBOOT_SCRIPT does not need to be mandatory anymore. Do not require the REBOOT_SCRIPT and always run the reboot code for both grub and script. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-01-02misc latin1 to utf8 conversionsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-22ktest: Fix compare script to test if options are not documentedSteven Rostedt
The compare script compare-ktest-sample.pl checks for options that are defined in ktest.pl and not documented in samples.conf, as well as samples in samples.conf that are not used in ktest.pl. With the switch to the hash format to initialize the ktest variables the compare script needs to be updated to handle the change. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22ktest: Detect typos in option namesSteven Rostedt
It becomes quite annoying when you go to run a test and then realize that you typed an option name wrong, and the test starts doing the default action and not what you expected it to do. It is even more annoying when you wake up the next day after running the test over night when you discover this. By testing if all options specified in a config file are used by either ktest or were used in one of the option's values we can see if there are any dangling options that were not used. In such a case, show the user the options that were not used and ask them if they want to continue or not. The option IGNORE_UNUSED was also added to allow the user to override this feature. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22ktest: Have all values be set by defaultsSteven Rostedt
Currently the patchcheck, bisect, and config_bisect variables are only able to be set per test. You can not set a default value for them. By letting default values be set, it makes some config files a bit easier, and also makes it easier to find typos in the option names. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22ktest: Change initialization of defaults hash to perl formatSteven Rostedt
Initializing each default value by specifying the hash name is ugly. This is one of the rare cases that the "perl way" is actually much cleaner and easier to read. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22ktest: Add options SWITCH_TO_GOOD and SWITCH_TO_TESTSteven Rostedt
For machines that do no use grub, it may be needed to update an external image (tftp) before doing a reboot into either the test image or the known good image. The option SWITCH_TO_GOOD is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into a known good image. The option SWITCH_TO_TEST is added, where if it is defined, the command that is specified as its value will be executed before doing a reboot into the test image. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22ktest: Allow overriding bisect test resultsSteven Rostedt
When running the ktest git bisect test, if the BISECT_TYPE is "test", the bisect is determined to be good or bad based off of the error code of the test that is run. Currently, if the test returns 0, it is considered a pass (good), a non-zero is considered a fail (bad). But it has been requested to add more options, and also change the meanings of the error codes of the test. For example, one may want the test to detect if the commit is not good or bad, (maybe the bisect came to a point where the code in question does not exist). The test could report an error code that should tell ktest to skip the commit. Also, a test could detect that something is horribly wrong and the biscet should just be aborted. The new options: BISECT_RET_GOOD BISECT_RET_BAD BISECT_RET_SKIP BISECT_RET_ABORT BISECT_RET_DEFAULT have been added. The first 4 take an integer value that will represent if the test should be considered a pass, fail, neither good nor bad, or abort respectively. The BISECT_RET_DEFAULT will bo whatever is not defined by the above codes. If only BISECT_RET_DEFAULT is defined, then all tests will do the default. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22ktest: Evaluate options before processing themSteven Rostedt
All options can take variables "${var}". Before doing any processing or decision making on the content of an option, evaluate it incase there are variables that may change the outcome. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22ktest: Evaluate $KERNEL_VERSION in both install and post installSteven Rostedt
The install process may also need to know what the kernel version is, to add it to the name. Evaluate it for both install and post install. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22ktest: Only ask options needed for installSteven Rostedt
If all the tests are only for build or install, do not ask for options not needed to do the install, if the options do not exist. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22ktest: When creating a new config, ask for BUILD_OPTIONSSteven Rostedt
When creating a new config, ask for the BUILD_OPTIONS variable that lets users add things like -j20 to the make. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22ktest: Do not ask for some options if the only test is buildSteven Rostedt
When creating a ktest config or if te config only has build only tests, some of the manditory config options are not needed. Do not ask for them if all tests in the config file are just build tests. Suggested-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22ktest: Ask for type of test when creating a new configSteven Rostedt
When no argument is supplied to ktest, or the config applied does not exist and a new config is being created, instead of just using the default test type, give the user an option to pick the test type of either 'build, install, or boot'. Other options may be added later but then those would require more questions as they require more fields. But that's for another release of ktest to add that feature. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-12-22ktest: Allow bisect test to restart where it left offSteven Rostedt
If a bisect is killed for some reason, have ktest detect that a bisect is in progress and if so, allow the user to start the bisect where it left off. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-23ktest: When creating new config, allow the use of ${THIS_DIR}Steven Rostedt
Typing in a full path when you know that the path exists within the directory your are running is tedious and unnecessary. Allow the user to use ${PWD} if they want a dynamic path name which will be the path that ktest.pl is executed from or use ${THIS_DIR} which is a variable assigned `pwd` and the the variable will exist within the config, allowing the user to change it and affect all other paths using this variable as well Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-21ktest: Add default for ssh-user, build-target and target-imageSteven Rostedt
When a user runs ktest without an argument, or the argument given is not a config file that exists, ktest will ask the user a few questions to create a simple ktest config file. A few of the questions should have a default value set, that if anything it will make it easier for the user to know what is suppose to be in that value. These new values are: SSH_USER, BUILD_TARGET and TARGET_IMAGE Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-18ktest: Allow success logs to be storedRabin Vincent
Add a STORE_SUCCESSES option, to allow success logs to be stored, for example to double-check or otherwise post-process the test logs. Link: http://lkml.kernel.org/r/1321616131-21352-3-git-send-email-rabin@rab.in Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-18ktest: Save test outputRabin Vincent
The test output may contain useful information; save it along with the already-saved buildlog, dmesg, and .config. Link: http://lkml.kernel.org/r/1321616131-21352-1-git-send-email-rabin@rab.in Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-11-18ktest: Check parent options for iterated testsRabin Vincent
Let's say we have "OUTPUT_DIR = build/${TEST_NAME}", and we're iterating a test. In the second iteration of a test, the TEST_NAME of the test we're repeating is not used. Instead, ${TEST_NAME} appears literally: touch /home/rabin/kernel/test/build/${TEST_NAME}/.config ... SUCCESS Fix this by making __eval_option() check the parent test options for a repeated test. Link: http://lkml.kernel.org/r/1321616131-21352-2-git-send-email-rabin@rab.in Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-28ktest: Evaluate variables entered on the command lineSteven Rostedt
When ktest.pl is called without any arguments, or if the config file does not exist, ktest.pl will ask the user for some information. Some of these questions are code paths. Allowing the user to type ${PWD} for the current directory greatly simplifies these entries. Add variable processing to the entered values. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-22ktest: Add variable ${PWD}Steven Rostedt
Adding the variable ${PWD} that equals `pwd` makes the config files much simpler. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-22ktest: Add another monitor flush before installing kernelSteven Rostedt
On some tests that do multiple boots (patchcheck, bisect, etc), the build of the next kernel to run may finish before the stable kernel has finished booting. Then the install of the new kernel will fail when it tries to connect as the machine has not finished the boot process. Do one more monitor flush to make sure the machine is up and running before trying to connect to it again. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-20ktest: Do not opencode reboot in grub settingSteven Rostedt
When setting the next kernel to boot to with grub, do not opencode the reboot operation. The normal reboot operation can be modified by config options (namely POWERCYCLE_AFTER_REBOOT). This needs to affect all reboots. Remove the opencoded reboot to make sure that any changes to the reboot code also affect all reboots. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-17ktest: Add processing of complex conditionalsSteven Rostedt
The IF statements for DEFAULTS and TEST_START sections now handle complex statements (&&,||) Example: TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-17ktest: Fix parsing of config section linesSteven Rostedt
The order for some of the keywords on a section line (TEST_START or DEFAULTS) does not really matter. Simply need to remove the keyword from the line as we process it and evaluate the next keyword in the line. By removing the keywords as we find them, we do not need to keep track of where on the line they were found. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-17ktest: Sort make_min_config configs by dependeciesSteven Rostedt
The make_min_config test will turn off one config at a time and check if the config boots or not, and if it does, it will remove that config plus any config that depended on that config. ktest already looks if a config has a dependency and will try the dependency config first. But by sorting the configs and trying the config with the most configs dependent on it, we can shrink the minconfig faster. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-17ktest: Add DEFINED keyword for IF statementsSteven Rostedt
Have IF statements process if a config variable or option has been defined or not. Can use NOT DEFINED in the case for telling if a variable or option has not been defined. DEFAULTS IF NOT DEFINED SSH_USER SSH_USER = root Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-17ktest: Add OVERRIDE keyword to DEFAULTS sectionSteven Rostedt
The OVERRIDE keyword will allow options defined in the given DEFAULTS section to override options defined in previous DEFAULT sections. Normally, options will error if they were previous defined. The OVERRIDE keyword allows options that have been previously defined to be changed in the given section. Note, the same option can not be defined in the same DEFAULT section even if that section is marked as OVERRIDE. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-10-17ktest: Consolidate TEST_TYPE and DEFAULT codeSteven Rostedt
The code that handles parsing the TEST_TYPE and DEFAULT code share a lot of common functionality. Combine the two and add a if statement that does what is different between them. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>