From d51d0af43b30dcae1ca13ea67fd717e03b37f153 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Mon, 30 Jun 2014 16:01:30 +0100 Subject: irqchip: gic: Move some bits of GICv2 to a library-type file A few GICv2 low-level function are actually very useful to GICv3, and it makes some sense to share them across the two drivers. They end-up in their own file, with an additional parameter used to ensure an optional synchronization (unused on GICv2). Cc: Thomas Gleixner Cc: Jason Cooper Acked-by: Christoffer Dall Signed-off-by: Marc Zyngier Link: https://lkml.kernel.org/r/1404140510-5382-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper --- drivers/irqchip/irq-gic.c | 59 ++++------------------------------------------- 1 file changed, 4 insertions(+), 55 deletions(-) (limited to 'drivers/irqchip/irq-gic.c') diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index 7e11c9d6ae8c..508b81536b8a 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -46,6 +46,7 @@ #include #include +#include "irq-gic-common.h" #include "irqchip.h" union gic_base { @@ -188,12 +189,6 @@ static int gic_set_type(struct irq_data *d, unsigned int type) { void __iomem *base = gic_dist_base(d); unsigned int gicirq = gic_irq(d); - u32 enablemask = 1 << (gicirq % 32); - u32 enableoff = (gicirq / 32) * 4; - u32 confmask = 0x2 << ((gicirq % 16) * 2); - u32 confoff = (gicirq / 16) * 4; - bool enabled = false; - u32 val; /* Interrupt configuration for SGIs can't be changed */ if (gicirq < 16) @@ -207,25 +202,7 @@ static int gic_set_type(struct irq_data *d, unsigned int type) if (gic_arch_extn.irq_set_type) gic_arch_extn.irq_set_type(d, type); - val = readl_relaxed(base + GIC_DIST_CONFIG + confoff); - if (type == IRQ_TYPE_LEVEL_HIGH) - val &= ~confmask; - else if (type == IRQ_TYPE_EDGE_RISING) - val |= confmask; - - /* - * As recommended by the spec, disable the interrupt before changing - * the configuration - */ - if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) { - writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff); - enabled = true; - } - - writel_relaxed(val, base + GIC_DIST_CONFIG + confoff); - - if (enabled) - writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff); + gic_configure_irq(gicirq, type, base, NULL); raw_spin_unlock(&irq_controller_lock); @@ -386,12 +363,6 @@ static void __init gic_dist_init(struct gic_chip_data *gic) writel_relaxed(0, base + GIC_DIST_CTRL); - /* - * Set all global interrupts to be level triggered, active low. - */ - for (i = 32; i < gic_irqs; i += 16) - writel_relaxed(0, base + GIC_DIST_CONFIG + i * 4 / 16); - /* * Set all global interrupts to this CPU only. */ @@ -401,18 +372,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic) for (i = 32; i < gic_irqs; i += 4) writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4); - /* - * Set priority on all global interrupts. - */ - for (i = 32; i < gic_irqs; i += 4) - writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4); - - /* - * Disable all interrupts. Leave the PPI and SGIs alone - * as these enables are banked registers. - */ - for (i = 32; i < gic_irqs; i += 32) - writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32); + gic_dist_config(base, gic_irqs, NULL); writel_relaxed(1, base + GIC_DIST_CTRL); } @@ -439,18 +399,7 @@ static void gic_cpu_init(struct gic_chip_data *gic) if (i != cpu) gic_cpu_map[i] &= ~cpu_mask; - /* - * Deal with the banked PPI and SGI interrupts - disable all - * PPI interrupts, ensure all SGI interrupts are enabled. - */ - writel_relaxed(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR); - writel_relaxed(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET); - - /* - * Set priority on PPI and SGI interrupts - */ - for (i = 0; i < 32; i += 4) - writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4); + gic_cpu_config(dist_base, NULL); writel_relaxed(0xf0, base + GIC_CPU_PRIMASK); writel_relaxed(1, base + GIC_CPU_CTRL); -- cgit v1.2.3