Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC specific changes from Arnd Bergmann:
 "These changes are all to SoC-specific code, a total of 33 branches on
  17 platforms were pulled into this.  Like last time, Renesas sh-mobile
  is now the platform with the most changes, followed by OMAP and
  EXYNOS.

  Two new platforms, TI Keystone and Rockchips RK3xxx are added in this
  branch, both containing almost no platform specific code at all, since
  they are using generic subsystem interfaces for clocks, pinctrl,
  interrupts etc.  The device drivers are getting merged through the
  respective subsystem maintainer trees.

  One more SoC (u300) is now multiplatform capable and several others
  (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
  towards that goal with this series but need more work.

  Also noteworthy is the work on PCI here, which is traditionally part
  of the SoC specific code.  With the changes done by Thomas Petazzoni,
  we can now more easily have PCI host controller drivers as loadable
  modules and keep them separate from the platform code in
  drivers/pci/host.  This has already led to the discovery that three
  platforms (exynos, spear and imx) are actually using an identical PCIe
  host controller and will be able to share a driver once support for
  spear and imx is added."

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits)
  ARM: integrator: let pciv3 use mem/premem from device tree
  ARM: integrator: set local side PCI addresses right
  ARM: dts: Add pcie controller node for exynos5440-ssdk5440
  ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
  ARM: EXYNOS: Enable PCIe support for Exynos5440
  pci: Add PCIe driver for Samsung Exynos
  ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
  ARM: keystone: Move CPU bringup code to dedicated asm file
  ARM: multiplatform: always pick one CPU type
  ARM: imx: select syscon for IMX6SL
  ARM: keystone: select ARM_ERRATA_798181 only for SMP
  ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1
  ARM: OMAP2+: AM43x: resolve SMP related build error
  dmaengine: edma: enable build for AM33XX
  ARM: edma: Add EDMA crossbar event mux support
  ARM: edma: Add DT and runtime PM support to the private EDMA API
  dmaengine: edma: Add TI EDMA device tree binding
  arm: add basic support for Rockchip RK3066a boards
  arm: add debug uarts for rockchip rk29xx and rk3xxx series
  arm: Add basic clocks for Rockchip rk3066a SoCs
  ...

1 files changed, 0 insertions, 495 deletions

diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
deleted file mode 100644
index 70d992c540ae..000000000000
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ /dev/null
@@ -1,495 +0,0 @@
-/*
- * bonito board support
- *
- * Copyright (C) 2011 Renesas Solutions Corp.
- * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/videodev2.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <mach/r8a7740.h>
-#include <mach/irqs.h>
-#include <video/sh_mobile_lcdc.h>
-
-/*
- * CS	Address		device			note
- *----------------------------------------------------------------
- * 0	0x0000_0000	NOR Flash (64MB)	SW12 : bit3 = OFF
- * 2	0x0800_0000	ExtNOR (64MB)		SW12 : bit3 = OFF
- * 4			-
- * 5A			-
- * 5B	0x1600_0000	SRAM (8MB)
- * 6	0x1800_0000	FPGA (64K)
- *	0x1801_0000	Ether (4KB)
- *	0x1801_1000	USB (4KB)
- */
-
-/*
- * SW12
- *
- *	bit1			bit2			bit3
- *----------------------------------------------------------------------------
- * ON	NOR WriteProtect	NAND WriteProtect	CS0 ExtNOR / CS2 NOR
- * OFF	NOR Not WriteProtect	NAND Not WriteProtect	CS0 NOR    / CS2 ExtNOR
- */
-
-/*
- * SCIFA5 (CN42)
- *
- * S38.3 = ON
- * S39.6 = ON
- * S43.1 = ON
- */
-
-/*
- * LCDC0 (CN3/CN4/CN7)
- *
- * S38.1 = OFF
- * S38.2 = OFF
- */
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-/*
- * FPGA
- */
-#define IRQSR0		0x0020
-#define IRQSR1		0x0022
-#define IRQMR0		0x0030
-#define IRQMR1		0x0032
-#define BUSSWMR1	0x0070
-#define BUSSWMR2	0x0072
-#define BUSSWMR3	0x0074
-#define BUSSWMR4	0x0076
-
-#define LCDCR		0x10B4
-#define DEVRSTCR1	0x10D0
-#define DEVRSTCR2	0x10D2
-#define A1MDSR		0x10E0
-#define BVERR		0x1100
-
-/* FPGA IRQ */
-#define FPGA_IRQ_BASE		(512)
-#define FPGA_IRQ0		(FPGA_IRQ_BASE)
-#define FPGA_IRQ1		(FPGA_IRQ_BASE + 16)
-#define FPGA_ETH_IRQ		(FPGA_IRQ0 + 15)
-static u16 bonito_fpga_read(u32 offset)
-{
-	return __raw_readw(IOMEM(0xf0003000) + offset);
-}
-
-static void bonito_fpga_write(u32 offset, u16 val)
-{
-	__raw_writew(val, IOMEM(0xf0003000) + offset);
-}
-
-static void bonito_fpga_irq_disable(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-	u32 addr = (irq < 1016) ? IRQMR0 : IRQMR1;
-	int shift = irq % 16;
-
-	bonito_fpga_write(addr, bonito_fpga_read(addr) | (1 << shift));
-}
-
-static void bonito_fpga_irq_enable(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-	u32 addr = (irq < 1016) ? IRQMR0 : IRQMR1;
-	int shift = irq % 16;
-
-	bonito_fpga_write(addr, bonito_fpga_read(addr) & ~(1 << shift));
-}
-
-static struct irq_chip bonito_fpga_irq_chip __read_mostly = {
-	.name		= "bonito FPGA",
-	.irq_mask	= bonito_fpga_irq_disable,
-	.irq_unmask	= bonito_fpga_irq_enable,
-};
-
-static void bonito_fpga_irq_demux(unsigned int irq, struct irq_desc *desc)
-{
-	u32 val =  bonito_fpga_read(IRQSR1) << 16 |
-		   bonito_fpga_read(IRQSR0);
-	u32 mask = bonito_fpga_read(IRQMR1) << 16 |
-		   bonito_fpga_read(IRQMR0);
-
-	int i;
-
-	val &= ~mask;
-
-	for (i = 0; i < 32; i++) {
-		if (!(val & (1 << i)))
-			continue;
-
-		generic_handle_irq(FPGA_IRQ_BASE + i);
-	}
-}
-
-static void bonito_fpga_init(void)
-{
-	int i;
-
-	bonito_fpga_write(IRQMR0, 0xffff); /* mask all */
-	bonito_fpga_write(IRQMR1, 0xffff); /* mask all */
-
-	/* Device reset */
-	bonito_fpga_write(DEVRSTCR1,
-		   (1 << 2));	/* Eth */
-
-	/* FPGA irq require special handling */
-	for (i = FPGA_IRQ_BASE; i < FPGA_IRQ_BASE + 32; i++) {
-		irq_set_chip_and_handler_name(i, &bonito_fpga_irq_chip,
-					      handle_level_irq, "level");
-		set_irq_flags(i, IRQF_VALID); /* yuck */
-	}
-
-	irq_set_chained_handler(evt2irq(0x0340), bonito_fpga_irq_demux);
-	irq_set_irq_type(evt2irq(0x0340), IRQ_TYPE_LEVEL_LOW);
-}
-
-/*
-* PMIC settings
-*
-* FIXME
-*
-* bonito board needs some settings by pmic which use i2c access.
-* pmic settings use device_initcall() here for use it.
-*/
-static __u8 *pmic_settings = NULL;
-static __u8 pmic_do_2A[] = {
-	0x1C, 0x09,
-	0x1A, 0x80,
-	0xff, 0xff,
-};
-
-static int __init pmic_init(void)
-{
-	struct i2c_adapter *a = i2c_get_adapter(0);
-	struct i2c_msg msg;
-	__u8 buf[2];
-	int i, ret;
-
-	if (!pmic_settings)
-		return 0;
-	if (!a)
-		return 0;
-
-	msg.addr	= 0x46;
-	msg.buf		= buf;
-	msg.len		= 2;
-	msg.flags	= 0;
-
-	for (i = 0; ; i += 2) {
-		buf[0] = pmic_settings[i + 0];
-		buf[1] = pmic_settings[i + 1];
-
-		if ((0xff == buf[0]) && (0xff == buf[1]))
-			break;
-
-		ret = i2c_transfer(a, &msg, 1);
-		if (ret < 0) {
-			pr_err("i2c transfer fail\n");
-			break;
-		}
-	}
-
-	return 0;
-}
-device_initcall(pmic_init);
-
-/*
- * LCDC0
- */
-static const struct fb_videomode lcdc0_mode = {
-	.name		= "WVGA Panel",
-	.xres		= 800,
-	.yres		= 480,
-	.left_margin	= 88,
-	.right_margin	= 40,
-	.hsync_len	= 128,
-	.upper_margin	= 20,
-	.lower_margin	= 5,
-	.vsync_len	= 5,
-	.sync		= 0,
-};
-
-static struct sh_mobile_lcdc_info lcdc0_info = {
-	.clock_source	= LCDC_CLK_BUS,
-	.ch[0] = {
-		.chan			= LCDC_CHAN_MAINLCD,
-		.fourcc = V4L2_PIX_FMT_RGB565,
-		.interface_type		= RGB24,
-		.clock_divider		= 5,
-		.flags			= 0,
-		.lcd_modes		= &lcdc0_mode,
-		.num_modes		= 1,
-		.panel_cfg = {
-			.width	= 152,
-			.height = 91,
-		},
-	},
-};
-
-static struct resource lcdc0_resources[] = {
-	[0] = {
-		.name	= "LCDC0",
-		.start	= 0xfe940000,
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x0580),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc0_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.id		= 0,
-	.resource	= lcdc0_resources,
-	.num_resources	= ARRAY_SIZE(lcdc0_resources),
-	.dev	= {
-		.platform_data	= &lcdc0_info,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-static const struct pinctrl_map lcdc0_pinctrl_map[] = {
-	/* LCD0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
-				  "lcd0_data24_1", "lcd0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
-				  "lcd0_lclk_1", "lcd0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
-				  "lcd0_sync", "lcd0"),
-};
-
-/*
- * SMSC 9221
- */
-static struct resource smsc_resources[] = {
-	[0] = {
-		.start		= 0x18010000,
-		.end		= 0x18011000 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= FPGA_ETH_IRQ,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config smsc_platdata = {
-	.flags		= SMSC911X_USE_16BIT,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device smsc_device = {
-	.name		= "smsc911x",
-	.dev  = {
-		.platform_data = &smsc_platdata,
-	},
-	.resource	= smsc_resources,
-	.num_resources	= ARRAY_SIZE(smsc_resources),
-};
-
-/*
- * core board devices
- */
-static struct platform_device *bonito_core_devices[] __initdata = {
-};
-
-/*
- * base board devices
- */
-static struct platform_device *bonito_base_devices[] __initdata = {
-	&lcdc0_device,
-	&smsc_device,
-};
-
-/*
- * map I/O
- */
-static struct map_desc bonito_io_desc[] __initdata = {
-	/*
-	 * for FPGA (0x1800000-0x19ffffff)
-	 * 0x18000000-0x18002000 -> 0xf0003000-0xf0005000
-	 */
-	{
-		.virtual	= 0xf0003000,
-		.pfn		= __phys_to_pfn(0x18000000),
-		.length		= PAGE_SIZE * 2,
-		.type		= MT_DEVICE_NONSHARED
-	}
-};
-
-static void __init bonito_map_io(void)
-{
-	r8a7740_map_io();
-	iotable_init(bonito_io_desc, ARRAY_SIZE(bonito_io_desc));
-}
-
-/*
- * board init
- */
-#define BIT_ON(sw, bit)		(sw & (1 << bit))
-#define BIT_OFF(sw, bit)	(!(sw & (1 << bit)))
-
-#define VCCQ1CR		IOMEM(0xE6058140)
-#define VCCQ1LCDCR	IOMEM(0xE6058186)
-
-static void __init bonito_init(void)
-{
-	u16 val;
-
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	r8a7740_pinmux_init();
-	bonito_fpga_init();
-
-	pmic_settings = pmic_do_2A;
-
-	/*
-	 * core board settings
-	 */
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Early BRESP enable, Shared attribute override enable, 32K*8way */
-	l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
-#endif
-
-	r8a7740_add_standard_devices();
-
-	platform_add_devices(bonito_core_devices,
-			     ARRAY_SIZE(bonito_core_devices));
-
-	/*
-	 * base board settings
-	 */
-	gpio_request_one(176, GPIOF_IN, NULL);
-	if (!gpio_get_value(176)) {
-		u16 bsw2;
-		u16 bsw3;
-		u16 bsw4;
-
-		/*
-		 * FPGA
-		 */
-		gpio_request(GPIO_FN_CS5B,		NULL);
-		gpio_request(GPIO_FN_CS6A,		NULL);
-		gpio_request(GPIO_FN_CS5A_PORT105,	NULL);
-		gpio_request(GPIO_FN_IRQ10,		NULL);
-
-		val = bonito_fpga_read(BVERR);
-		pr_info("bonito version: cpu %02x, base %02x\n",
-			((val >> 8) & 0xFF),
-			((val >> 0) & 0xFF));
-
-		bsw2 = bonito_fpga_read(BUSSWMR2);
-		bsw3 = bonito_fpga_read(BUSSWMR3);
-		bsw4 = bonito_fpga_read(BUSSWMR4);
-
-		/*
-		 * SCIFA5 (CN42)
-		 */
-		if (BIT_OFF(bsw2, 1) &&	/* S38.3 = ON */
-		    BIT_OFF(bsw3, 9) &&	/* S39.6 = ON */
-		    BIT_OFF(bsw4, 4)) {	/* S43.1 = ON */
-			gpio_request(GPIO_FN_SCIFA5_TXD_PORT91,	NULL);
-			gpio_request(GPIO_FN_SCIFA5_RXD_PORT92,	NULL);
-		}
-
-		/*
-		 * LCDC0 (CN3)
-		 */
-		if (BIT_ON(bsw2, 3) &&	/* S38.1 = OFF */
-		    BIT_ON(bsw2, 2)) {	/* S38.2 = OFF */
-			pinctrl_register_mappings(lcdc0_pinctrl_map,
-						  ARRAY_SIZE(lcdc0_pinctrl_map));
-			gpio_request(GPIO_FN_LCDC0_SELECT, NULL);
-
-			gpio_request_one(61, GPIOF_OUT_INIT_HIGH,
-					 NULL); /* LCDDON */
-
-			/* backlight on */
-			bonito_fpga_write(LCDCR, 1);
-
-			/*  drivability Max */
-			__raw_writew(0x00FF , VCCQ1LCDCR);
-			__raw_writew(0xFFFF , VCCQ1CR);
-		}
-
-		platform_add_devices(bonito_base_devices,
-				     ARRAY_SIZE(bonito_base_devices));
-	}
-}
-
-static void __init bonito_earlytimer_init(void)
-{
-	u16 val;
-	u8 md_ck = 0;
-
-	/* read MD_CK value */
-	val = bonito_fpga_read(A1MDSR);
-	if (val & (1 << 10))
-		md_ck |= MD_CK2;
-	if (val & (1 << 9))
-		md_ck |= MD_CK1;
-	if (val & (1 << 8))
-		md_ck |= MD_CK0;
-
-	r8a7740_clock_init(md_ck);
-	shmobile_earlytimer_init();
-}
-
-static void __init bonito_add_early_devices(void)
-{
-	r8a7740_add_early_devices();
-}
-
-MACHINE_START(BONITO, "bonito")
-	.map_io		= bonito_map_io,
-	.init_early	= bonito_add_early_devices,
-	.init_irq	= r8a7740_init_irq,
-	.handle_irq	= shmobile_handle_irq_intc,
-	.init_machine	= bonito_init,
-	.init_late	= shmobile_init_late,
-	.init_time	= bonito_earlytimer_init,
-MACHINE_END