diff options
| author | Johan Rudholm <johan.rudholm@stericsson.com> | 2013-01-28 15:08:27 +0100 |
|---|---|---|
| committer | Chris Ball <cjb@laptop.org> | 2013-02-24 14:37:07 -0500 |
| commit | 567c89032cfdda8047562abe450947ac01f2d3c7 (patch) | |
| tree | 09bdcb03c610055c9c1b69220948619d62934142 /drivers/mmc/core/mmc.c | |
| parent | d887874e0ead6a0b86b6046b872730c81c121352 (diff) | |
mmc: core: Break out start_signal_voltage_switch
Allow callers to access the start_signal_voltage_switch host_ops
member without going through any cmd11 logic. This is mostly a
preparation for the following signal voltage switch patch.
Also, reset ios.signal_voltage to its original value if
start_signal_voltage_switch fails.
Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Chris Ball <cjb@laptop.org>
Diffstat (limited to 'drivers/mmc/core/mmc.c')
| -rw-r--r-- | drivers/mmc/core/mmc.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 0d7a9795a6da..8a3ad602a877 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -769,11 +769,11 @@ static int mmc_select_hs200(struct mmc_card *card) if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V && host->caps2 & MMC_CAP2_HS200_1_2V_SDR) - err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120, 0); + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); if (err && card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_8V && host->caps2 & MMC_CAP2_HS200_1_8V_SDR) - err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, 0); + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); /* If fails try again during next card power cycle */ if (err) @@ -1221,8 +1221,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * WARNING: eMMC rules are NOT the same as SD DDR */ if (ddr == MMC_1_2V_DDR_MODE) { - err = mmc_set_signal_voltage(host, - MMC_SIGNAL_VOLTAGE_120, 0); + err = __mmc_set_signal_voltage(host, + MMC_SIGNAL_VOLTAGE_120); if (err) goto err; } |