diff options
| author | Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> | 2014-10-28 16:51:27 +0200 |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2014-10-30 15:26:52 -0400 |
| commit | 9a06bec9aee0ae54f175b20a8d4f5e14aef24a9f (patch) | |
| tree | ab1f005b704613dd14a688a0d82db38ba0aa33d9 /drivers/net/wireless/ath/wil6210/main.c | |
| parent | e240537b4c7303748fe44e03a6309d1d55893cd3 (diff) | |
wil6210: Add support for large packets
It is possible to configure driver using mtu_max module parameter
by setting it to value in range of 68..7920 inclusive.
This is sub-optimal performance-wise in case packet is larger than 1 page.
mtu_max default value is 2228.
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/ath/wil6210/main.c')
| -rw-r--r-- | drivers/net/wireless/ath/wil6210/main.c | 29 |
1 files changed, 29 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index 92705c0d97a4..6212983fede2 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -38,6 +38,35 @@ static unsigned int itr_trsh = WIL6210_ITR_TRSH_DEFAULT; module_param(itr_trsh, uint, S_IRUGO); MODULE_PARM_DESC(itr_trsh, " Interrupt moderation threshold, usecs."); +/* We allow allocation of more than 1 page buffers to support large packets. + * It is suboptimal behavior performance wise in case MTU above page size. + */ +unsigned int mtu_max = TXRX_BUF_LEN_DEFAULT - ETH_HLEN; +static int mtu_max_set(const char *val, const struct kernel_param *kp) +{ + int ret; + + /* sets mtu_max directly. no need to restore it in case of + * illegal value since we assume this will fail insmod + */ + ret = param_set_uint(val, kp); + if (ret) + return ret; + + if (mtu_max < 68 || mtu_max > IEEE80211_MAX_DATA_LEN_DMG) + ret = -EINVAL; + + return ret; +} + +static struct kernel_param_ops mtu_max_ops = { + .set = mtu_max_set, + .get = param_get_uint, +}; + +module_param_cb(mtu_max, &mtu_max_ops, &mtu_max, S_IRUGO); +MODULE_PARM_DESC(mtu_max, " Max MTU value."); + #define RST_DELAY (20) /* msec, for loop in @wil_target_reset */ #define RST_COUNT (1 + 1000/RST_DELAY) /* round up to be above 1 sec total */ |