Merge branch 'linux-linaro-lsk-v3.14' into linux-linaro-lsk-v3.14-rtlsk-v3.14-15.08-rt

6 files changed, 101 insertions, 41 deletions

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 528bff5ec91f..85d370e1ca79 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3984,10 +3984,6 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 
 	/* Save the PCI command register */
 	pci_read_config_word(pdev, 4, &command_register);
-	/* Turn the board off.  This is so that later pci_restore_state()
-	 * won't turn the board on before the rest of config space is ready.
-	 */
-	pci_disable_device(pdev);
 	pci_save_state(pdev);
 
 	/* find the first memory BAR, so we can find the cfg table */
@@ -4035,11 +4031,6 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 		goto unmap_cfgtable;
 
 	pci_restore_state(pdev);
-	rc = pci_enable_device(pdev);
-	if (rc) {
-		dev_warn(&pdev->dev, "failed to enable device.\n");
-		goto unmap_cfgtable;
-	}
 	pci_write_config_word(pdev, 4, command_register);
 
 	/* Some devices (notably the HP Smart Array 5i Controller)
@@ -4525,6 +4516,23 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev)
 	if (!reset_devices)
 		return 0;
 
+	/* kdump kernel is loading, we don't know in which state is
+	 * the pci interface. The dev->enable_cnt is equal zero
+	 * so we call enable+disable, wait a while and switch it on.
+	 */
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		dev_warn(&pdev->dev, "Failed to enable PCI device\n");
+		return -ENODEV;
+	}
+	pci_disable_device(pdev);
+	msleep(260);			/* a randomly chosen number */
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		dev_warn(&pdev->dev, "failed to enable device.\n");
+		return -ENODEV;
+	}
+	pci_set_master(pdev);
 	/* Reset the controller with a PCI power-cycle or via doorbell */
 	rc = hpsa_kdump_hard_reset_controller(pdev);
 
@@ -4533,10 +4541,11 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev)
 	 * "performant mode".  Or, it might be 640x, which can't reset
 	 * due to concerns about shared bbwc between 6402/6404 pair.
 	 */
-	if (rc == -ENOTSUPP)
-		return rc; /* just try to do the kdump anyhow. */
-	if (rc)
-		return -ENODEV;
+	if (rc) {
+		if (rc != -ENOTSUPP) /* just try to do the kdump anyhow. */
+			rc = -ENODEV;
+		goto out_disable;
+	}
 
 	/* Now try to get the controller to respond to a no-op */
 	dev_warn(&pdev->dev, "Waiting for controller to respond to no-op\n");
@@ -4547,7 +4556,11 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev)
 			dev_warn(&pdev->dev, "no-op failed%s\n",
 					(i < 11 ? "; re-trying" : ""));
 	}
-	return 0;
+
+out_disable:
+
+	pci_disable_device(pdev);
+	return rc;
 }
 
 static int hpsa_allocate_cmd_pool(struct ctlr_info *h)
@@ -4690,6 +4703,7 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
 		iounmap(h->transtable);
 	if (h->cfgtable)
 		iounmap(h->cfgtable);
+	pci_disable_device(h->pdev);
 	pci_release_regions(h->pdev);
 	kfree(h);
 }
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 0801f3df4b27..02edae714b0e 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -264,7 +264,7 @@
 #define IPR_RUNTIME_RESET				0x40000000
 
 #define IPR_IPL_INIT_MIN_STAGE_TIME			5
-#define IPR_IPL_INIT_DEFAULT_STAGE_TIME                 15
+#define IPR_IPL_INIT_DEFAULT_STAGE_TIME                 30
 #define IPR_IPL_INIT_STAGE_UNKNOWN			0x0
 #define IPR_IPL_INIT_STAGE_TRANSOP			0xB0000000
 #define IPR_IPL_INIT_STAGE_MASK				0xff000000
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 8f580fda443f..ce211328bc1c 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -265,6 +265,16 @@ lpfc_sli4_eq_get(struct lpfc_queue *q)
 		return NULL;
 
 	q->hba_index = idx;
+
+	/*
+	 * insert barrier for instruction interlock : data from the hardware
+	 * must have the valid bit checked before it can be copied and acted
+	 * upon. Given what was seen in lpfc_sli4_cq_get() of speculative
+	 * instructions allowing action on content before valid bit checked,
+	 * add barrier here as well. May not be needed as "content" is a
+	 * single 32-bit entity here (vs multi word structure for cq's).
+	 */
+	mb();
 	return eqe;
 }
 
@@ -370,6 +380,17 @@ lpfc_sli4_cq_get(struct lpfc_queue *q)
 
 	cqe = q->qe[q->hba_index].cqe;
 	q->hba_index = idx;
+
+	/*
+	 * insert barrier for instruction interlock : data from the hardware
+	 * must have the valid bit checked before it can be copied and acted
+	 * upon. Speculative instructions were allowing a bcopy at the start
+	 * of lpfc_sli4_fp_handle_wcqe(), which is called immediately
+	 * after our return, to copy data before the valid bit check above
+	 * was done. As such, some of the copied data was stale. The barrier
+	 * ensures the check is before any data is copied.
+	 */
+	mb();
 	return cqe;
 }
 
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 0a1dcb43d18b..13f4bef214dc 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -572,8 +572,9 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 	struct device_reg_24xx __iomem *reg24 = &ha->iobase->isp24;
 	struct device_reg_82xx __iomem *reg82 = &ha->iobase->isp82;
-	uint32_t	rscn_entry, host_pid;
+	uint32_t	rscn_entry, host_pid, tmp_pid;
 	unsigned long	flags;
+	fc_port_t	*fcport = NULL;
 
 	/* Setup to process RIO completion. */
 	handle_cnt = 0;
@@ -968,6 +969,20 @@ skip_rio:
 		if (qla2x00_is_a_vp_did(vha, rscn_entry))
 			break;
 
+		/*
+		 * Search for the rport related to this RSCN entry and mark it
+		 * as lost.
+		 */
+		list_for_each_entry(fcport, &vha->vp_fcports, list) {
+			if (atomic_read(&fcport->state) != FCS_ONLINE)
+				continue;
+			tmp_pid = fcport->d_id.b24;
+			if (fcport->d_id.b24 == rscn_entry) {
+				qla2x00_mark_device_lost(vha, fcport, 0, 0);
+				break;
+			}
+		}
+
 		atomic_set(&vha->loop_down_timer, 0);
 		vha->flags.management_server_logged_in = 0;
 
diff --git a/drivers/scsi/scsi_transport_srp.c b/drivers/scsi/scsi_transport_srp.c
index e3e794ee7ddd..b85eaa0d75c2 100644
--- a/drivers/scsi/scsi_transport_srp.c
+++ b/drivers/scsi/scsi_transport_srp.c
@@ -397,6 +397,36 @@ static void srp_reconnect_work(struct work_struct *work)
 	}
 }
 
+/**
+ * scsi_request_fn_active() - number of kernel threads inside scsi_request_fn()
+ * @shost: SCSI host for which to count the number of scsi_request_fn() callers.
+ *
+ * To do: add support for scsi-mq in this function.
+ */
+static int scsi_request_fn_active(struct Scsi_Host *shost)
+{
+	struct scsi_device *sdev;
+	struct request_queue *q;
+	int request_fn_active = 0;
+
+	shost_for_each_device(sdev, shost) {
+		q = sdev->request_queue;
+
+		spin_lock_irq(q->queue_lock);
+		request_fn_active += q->request_fn_active;
+		spin_unlock_irq(q->queue_lock);
+	}
+
+	return request_fn_active;
+}
+
+/* Wait until ongoing shost->hostt->queuecommand() calls have finished. */
+static void srp_wait_for_queuecommand(struct Scsi_Host *shost)
+{
+	while (scsi_request_fn_active(shost))
+		msleep(20);
+}
+
 static void __rport_fail_io_fast(struct srp_rport *rport)
 {
 	struct Scsi_Host *shost = rport_to_shost(rport);
@@ -410,8 +440,10 @@ static void __rport_fail_io_fast(struct srp_rport *rport)
 
 	/* Involve the LLD if possible to terminate all I/O on the rport. */
 	i = to_srp_internal(shost->transportt);
-	if (i->f->terminate_rport_io)
+	if (i->f->terminate_rport_io) {
+		srp_wait_for_queuecommand(shost);
 		i->f->terminate_rport_io(rport);
+	}
 }
 
 /**
@@ -505,27 +537,6 @@ void srp_start_tl_fail_timers(struct srp_rport *rport)
 EXPORT_SYMBOL(srp_start_tl_fail_timers);
 
 /**
- * scsi_request_fn_active() - number of kernel threads inside scsi_request_fn()
- * @shost: SCSI host for which to count the number of scsi_request_fn() callers.
- */
-static int scsi_request_fn_active(struct Scsi_Host *shost)
-{
-	struct scsi_device *sdev;
-	struct request_queue *q;
-	int request_fn_active = 0;
-
-	shost_for_each_device(sdev, shost) {
-		q = sdev->request_queue;
-
-		spin_lock_irq(q->queue_lock);
-		request_fn_active += q->request_fn_active;
-		spin_unlock_irq(q->queue_lock);
-	}
-
-	return request_fn_active;
-}
-
-/**
  * srp_reconnect_rport() - reconnect to an SRP target port
  * @rport: SRP target port.
  *
@@ -560,8 +571,7 @@ int srp_reconnect_rport(struct srp_rport *rport)
 	if (res)
 		goto out;
 	scsi_target_block(&shost->shost_gendev);
-	while (scsi_request_fn_active(shost))
-		msleep(20);
+	srp_wait_for_queuecommand(shost);
 	res = rport->state != SRP_RPORT_LOST ? i->f->reconnect(rport) : -ENODEV;
 	pr_debug("%s (state %d): transport.reconnect() returned %d\n",
 		 dev_name(&shost->shost_gendev), rport->state, res);
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index a1d6986261a3..f3109828c6df 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -1262,9 +1262,9 @@ static int st_open(struct inode *inode, struct file *filp)
 	spin_lock(&st_use_lock);
 	STp->in_use = 0;
 	spin_unlock(&st_use_lock);
-	scsi_tape_put(STp);
 	if (resumed)
 		scsi_autopm_put_device(STp->device);
+	scsi_tape_put(STp);
 	return retval;
 
 }