diff options
| -rw-r--r-- | Documentation/devicetree/bindings/usb/usb-ehci.txt | 25 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt | 15 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/usb/vt8500-ehci.txt | 12 | ||||
| -rw-r--r-- | drivers/usb/host/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-platform.c | 147 |
5 files changed, 142 insertions, 58 deletions
diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt index fa18612f757b..2c1aeebe12b7 100644 --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt @@ -7,13 +7,14 @@ Required properties: (debug-port or other) can be also specified here, but only after definition of standard EHCI registers. - interrupts : one EHCI interrupt should be described here. -If device registers are implemented in big endian mode, the device -node should have "big-endian-regs" property. -If controller implementation operates with big endian descriptors, -"big-endian-desc" property should be specified. -If both big endian registers and descriptors are used by the controller -implementation, "big-endian" property can be specified instead of having -both "big-endian-regs" and "big-endian-desc". + +Optional properties: + - big-endian-regs : boolean, set this for hcds with big-endian registers + - big-endian-desc : boolean, set this for hcds with big-endian descriptors + - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc + - clocks : a list of phandle + clock specifier pairs + - phys : phandle + phy specifier pair + - phy-names : "usb" Example (Sequoia 440EPx): ehci@e0000300 { @@ -23,3 +24,13 @@ Example (Sequoia 440EPx): reg = <0 e0000300 90 0 e0000390 70>; big-endian; }; + +Example (Allwinner sun4i A10 SoC): + ehci0: usb@01c14000 { + compatible = "allwinner,sun4i-a10-ehci", "usb-ehci"; + reg = <0x01c14000 0x100>; + interrupts = <39>; + clocks = <&ahb_gates 1>; + phys = <&usbphy 1>; + phy-names = "usb"; + }; diff --git a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt deleted file mode 100644 index 17b3ad1d97e7..000000000000 --- a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt +++ /dev/null @@ -1,15 +0,0 @@ -VIA/Wondermedia VT8500 EHCI Controller ------------------------------------------------------ - -Required properties: -- compatible : "via,vt8500-ehci" -- reg : Should contain 1 register ranges(address and length) -- interrupts : ehci controller interrupt - -Example: - - ehci@d8007900 { - compatible = "via,vt8500-ehci"; - reg = <0xd8007900 0x200>; - interrupts = <43>; - }; diff --git a/Documentation/devicetree/bindings/usb/vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/vt8500-ehci.txt deleted file mode 100644 index 5fb8fd6e250c..000000000000 --- a/Documentation/devicetree/bindings/usb/vt8500-ehci.txt +++ /dev/null @@ -1,12 +0,0 @@ -VIA VT8500 and Wondermedia WM8xxx SoC USB controllers. - -Required properties: - - compatible: Should be "via,vt8500-ehci" or "wm,prizm-ehci". - - reg: Address range of the ehci registers. size should be 0x200 - - interrupts: Should contain the ehci interrupt. - -usb: ehci@D8007100 { - compatible = "wm,prizm-ehci", "usb-ehci"; - reg = <0xD8007100 0x200>; - interrupts = <1>; -}; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index a9707da7da0b..e28cbe0e1f57 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -255,6 +255,7 @@ config USB_EHCI_ATH79 config USB_EHCI_HCD_PLATFORM tristate "Generic EHCI driver for a platform device" + depends on !PPC_OF default n ---help--- Adds an EHCI host driver for a generic platform device, which diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index 01536cfd361d..5ebd0b75b58e 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -3,6 +3,7 @@ * * Copyright 2007 Steven Brown <sbrown@cortland.com> * Copyright 2010-2012 Hauke Mehrtens <hauke@hauke-m.de> + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> * * Derived from the ohci-ssb driver * Copyright 2007 Michael Buesch <m@bues.ch> @@ -18,6 +19,7 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +#include <linux/clk.h> #include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/kernel.h> @@ -25,6 +27,7 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/usb.h> #include <linux/usb/hcd.h> @@ -33,6 +36,13 @@ #include "ehci.h" #define DRIVER_DESC "EHCI generic platform driver" +#define EHCI_MAX_CLKS 3 +#define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv) + +struct ehci_platform_priv { + struct clk *clks[EHCI_MAX_CLKS]; + struct phy *phy; +}; static const char hcd_name[] = "ehci-platform"; @@ -64,38 +74,90 @@ static int ehci_platform_reset(struct usb_hcd *hcd) return 0; } +static int ehci_platform_power_on(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); + int clk, ret; + + for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) { + ret = clk_prepare_enable(priv->clks[clk]); + if (ret) + goto err_disable_clks; + } + + if (priv->phy) { + ret = phy_init(priv->phy); + if (ret) + goto err_disable_clks; + + ret = phy_power_on(priv->phy); + if (ret) + goto err_exit_phy; + } + + return 0; + +err_exit_phy: + phy_exit(priv->phy); +err_disable_clks: + while (--clk >= 0) + clk_disable_unprepare(priv->clks[clk]); + + return ret; +} + +static void ehci_platform_power_off(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); + int clk; + + if (priv->phy) { + phy_power_off(priv->phy); + phy_exit(priv->phy); + } + + for (clk = EHCI_MAX_CLKS - 1; clk >= 0; clk--) + if (priv->clks[clk]) + clk_disable_unprepare(priv->clks[clk]); +} + static struct hc_driver __read_mostly ehci_platform_hc_driver; static const struct ehci_driver_overrides platform_overrides __initconst = { - .reset = ehci_platform_reset, + .reset = ehci_platform_reset, + .extra_priv_size = sizeof(struct ehci_platform_priv), }; -static struct usb_ehci_pdata ehci_platform_defaults; +static struct usb_ehci_pdata ehci_platform_defaults = { + .power_on = ehci_platform_power_on, + .power_suspend = ehci_platform_power_off, + .power_off = ehci_platform_power_off, +}; static int ehci_platform_probe(struct platform_device *dev) { struct usb_hcd *hcd; struct resource *res_mem; - struct usb_ehci_pdata *pdata; - int irq; - int err; + struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); + struct ehci_platform_priv *priv; + int err, irq, clk = 0; if (usb_disabled()) return -ENODEV; /* - * use reasonable defaults so platforms don't have to provide these. - * with DT probing on ARM, none of these are set. + * Use reasonable defaults so platforms don't have to provide these + * with DT probing on ARM. */ - if (!dev_get_platdata(&dev->dev)) - dev->dev.platform_data = &ehci_platform_defaults; + if (!pdata) + pdata = &ehci_platform_defaults; err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32)); if (err) return err; - pdata = dev_get_platdata(&dev->dev); - irq = platform_get_irq(dev, 0); if (irq < 0) { dev_err(&dev->dev, "no irq provided"); @@ -107,17 +169,40 @@ static int ehci_platform_probe(struct platform_device *dev) return -ENXIO; } + hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, + dev_name(&dev->dev)); + if (!hcd) + return -ENOMEM; + + platform_set_drvdata(dev, hcd); + dev->dev.platform_data = pdata; + priv = hcd_to_ehci_priv(hcd); + + if (pdata == &ehci_platform_defaults && dev->dev.of_node) { + priv->phy = devm_phy_get(&dev->dev, "usb"); + if (IS_ERR(priv->phy)) { + err = PTR_ERR(priv->phy); + if (err == -EPROBE_DEFER) + goto err_put_hcd; + priv->phy = NULL; + } + + for (clk = 0; clk < EHCI_MAX_CLKS; clk++) { + priv->clks[clk] = of_clk_get(dev->dev.of_node, clk); + if (IS_ERR(priv->clks[clk])) { + err = PTR_ERR(priv->clks[clk]); + if (err == -EPROBE_DEFER) + goto err_put_clks; + priv->clks[clk] = NULL; + break; + } + } + } + if (pdata->power_on) { err = pdata->power_on(dev); if (err < 0) - return err; - } - - hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, - dev_name(&dev->dev)); - if (!hcd) { - err = -ENOMEM; - goto err_power; + goto err_put_clks; } hcd->rsrc_start = res_mem->start; @@ -126,22 +211,28 @@ static int ehci_platform_probe(struct platform_device *dev) hcd->regs = devm_ioremap_resource(&dev->dev, res_mem); if (IS_ERR(hcd->regs)) { err = PTR_ERR(hcd->regs); - goto err_put_hcd; + goto err_power; } err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) - goto err_put_hcd; + goto err_power; device_wakeup_enable(hcd->self.controller); platform_set_drvdata(dev, hcd); return err; -err_put_hcd: - usb_put_hcd(hcd); err_power: if (pdata->power_off) pdata->power_off(dev); +err_put_clks: + while (--clk >= 0) + clk_put(priv->clks[clk]); +err_put_hcd: + if (pdata == &ehci_platform_defaults) + dev->dev.platform_data = NULL; + + usb_put_hcd(hcd); return err; } @@ -150,13 +241,19 @@ static int ehci_platform_remove(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); + int clk; usb_remove_hcd(hcd); - usb_put_hcd(hcd); if (pdata->power_off) pdata->power_off(dev); + for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) + clk_put(priv->clks[clk]); + + usb_put_hcd(hcd); + if (pdata == &ehci_platform_defaults) dev->dev.platform_data = NULL; @@ -207,8 +304,10 @@ static int ehci_platform_resume(struct device *dev) static const struct of_device_id vt8500_ehci_ids[] = { { .compatible = "via,vt8500-ehci", }, { .compatible = "wm,prizm-ehci", }, + { .compatible = "usb-ehci", }, {} }; +MODULE_DEVICE_TABLE(of, vt8500_ehci_ids); static const struct platform_device_id ehci_platform_table[] = { { "ehci-platform", 0 }, |