diff options
Diffstat (limited to 'drivers/thermal/of-thermal.c')
-rw-r--r-- | drivers/thermal/of-thermal.c | 192 |
1 files changed, 147 insertions, 45 deletions
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index 62143ba31001..b295b2b6c191 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -30,27 +30,13 @@ #include <linux/err.h> #include <linux/export.h> #include <linux/string.h> +#include <linux/thermal.h> #include "thermal_core.h" /*** Private data structures to represent thermal device tree data ***/ /** - * struct __thermal_trip - representation of a point in temperature domain - * @np: pointer to struct device_node that this trip point was created from - * @temperature: temperature value in miliCelsius - * @hysteresis: relative hysteresis in miliCelsius - * @type: trip point type - */ - -struct __thermal_trip { - struct device_node *np; - unsigned long int temperature; - unsigned long int hysteresis; - enum thermal_trip_type type; -}; - -/** * struct __thermal_bind_param - a match between trip and cooling device * @cooling_device: a pointer to identify the referred cooling device * @trip_id: the trip point index @@ -72,23 +58,26 @@ struct __thermal_bind_params { * @mode: current thermal zone device mode (enabled/disabled) * @passive_delay: polling interval while passive cooling is activated * @polling_delay: zone polling interval + * @slope: slope of the temperature adjustment curve + * @offset: offset of the temperature adjustment curve * @ntrips: number of trip points * @trips: an array of trip points (0..ntrips - 1) * @num_tbps: number of thermal bind params * @tbps: an array of thermal bind params (0..num_tbps - 1) * @sensor_data: sensor private data used while reading temperature and trend - * @get_temp: sensor callback to read temperature - * @get_trend: sensor callback to read temperature trend + * @ops: set of callbacks to handle the thermal zone based on DT */ struct __thermal_zone { enum thermal_device_mode mode; int passive_delay; int polling_delay; + int slope; + int offset; /* trip data */ int ntrips; - struct __thermal_trip *trips; + struct thermal_trip *trips; /* cooling binding data */ int num_tbps; @@ -96,8 +85,7 @@ struct __thermal_zone { /* sensor interface */ void *sensor_data; - int (*get_temp)(void *, long *); - int (*get_trend)(void *, long *); + const struct thermal_zone_of_device_ops *ops; }; /*** DT thermal zone device callbacks ***/ @@ -107,10 +95,96 @@ static int of_thermal_get_temp(struct thermal_zone_device *tz, { struct __thermal_zone *data = tz->devdata; - if (!data->get_temp) + if (!data->ops->get_temp) return -EINVAL; - return data->get_temp(data->sensor_data, temp); + return data->ops->get_temp(data->sensor_data, temp); +} + +/** + * of_thermal_get_ntrips - function to export number of available trip + * points. + * @tz: pointer to a thermal zone + * + * This function is a globally visible wrapper to get number of trip points + * stored in the local struct __thermal_zone + * + * Return: number of available trip points, -ENODEV when data not available + */ +int of_thermal_get_ntrips(struct thermal_zone_device *tz) +{ + struct __thermal_zone *data = tz->devdata; + + if (!data || IS_ERR(data)) + return -ENODEV; + + return data->ntrips; +} +EXPORT_SYMBOL_GPL(of_thermal_get_ntrips); + +/** + * of_thermal_is_trip_valid - function to check if trip point is valid + * + * @tz: pointer to a thermal zone + * @trip: trip point to evaluate + * + * This function is responsible for checking if passed trip point is valid + * + * Return: true if trip point is valid, false otherwise + */ +bool of_thermal_is_trip_valid(struct thermal_zone_device *tz, int trip) +{ + struct __thermal_zone *data = tz->devdata; + + if (!data || trip >= data->ntrips || trip < 0) + return false; + + return true; +} +EXPORT_SYMBOL_GPL(of_thermal_is_trip_valid); + +/** + * of_thermal_get_trip_points - function to get access to a globally exported + * trip points + * + * @tz: pointer to a thermal zone + * + * This function provides a pointer to trip points table + * + * Return: pointer to trip points table, NULL otherwise + */ +const struct thermal_trip * +of_thermal_get_trip_points(struct thermal_zone_device *tz) +{ + struct __thermal_zone *data = tz->devdata; + + if (!data) + return NULL; + + return data->trips; +} +EXPORT_SYMBOL_GPL(of_thermal_get_trip_points); + +/** + * of_thermal_set_emul_temp - function to set emulated temperature + * + * @tz: pointer to a thermal zone + * @temp: temperature to set + * + * This function gives the ability to set emulated value of temperature, + * which is handy for debugging + * + * Return: zero on success, error code otherwise + */ +static int of_thermal_set_emul_temp(struct thermal_zone_device *tz, + unsigned long temp) +{ + struct __thermal_zone *data = tz->devdata; + + if (!data->ops || !data->ops->set_emul_temp) + return -EINVAL; + + return data->ops->set_emul_temp(data->sensor_data, temp); } static int of_thermal_get_trend(struct thermal_zone_device *tz, int trip, @@ -120,10 +194,10 @@ static int of_thermal_get_trend(struct thermal_zone_device *tz, int trip, long dev_trend; int r; - if (!data->get_trend) + if (!data->ops->get_trend) return -EINVAL; - r = data->get_trend(data->sensor_data, &dev_trend); + r = data->ops->get_trend(data->sensor_data, &dev_trend); if (r) return r; @@ -157,7 +231,8 @@ static int of_thermal_bind(struct thermal_zone_device *thermal, ret = thermal_zone_bind_cooling_device(thermal, tbp->trip_id, cdev, tbp->max, - tbp->min); + tbp->min, + tbp->usage); if (ret) return ret; } @@ -324,8 +399,7 @@ static struct thermal_zone_device_ops of_thermal_ops = { static struct thermal_zone_device * thermal_zone_of_add_sensor(struct device_node *zone, struct device_node *sensor, void *data, - int (*get_temp)(void *, long *), - int (*get_trend)(void *, long *)) + const struct thermal_zone_of_device_ops *ops) { struct thermal_zone_device *tzd; struct __thermal_zone *tz; @@ -336,13 +410,16 @@ thermal_zone_of_add_sensor(struct device_node *zone, tz = tzd->devdata; + if (!ops) + return ERR_PTR(-EINVAL); + mutex_lock(&tzd->lock); - tz->get_temp = get_temp; - tz->get_trend = get_trend; + tz->ops = ops; tz->sensor_data = data; tzd->ops->get_temp = of_thermal_get_temp; tzd->ops->get_trend = of_thermal_get_trend; + tzd->ops->set_emul_temp = of_thermal_set_emul_temp; mutex_unlock(&tzd->lock); return tzd; @@ -356,8 +433,7 @@ thermal_zone_of_add_sensor(struct device_node *zone, * than one sensors * @data: a private pointer (owned by the caller) that will be passed * back, when a temperature reading is needed. - * @get_temp: a pointer to a function that reads the sensor temperature. - * @get_trend: a pointer to a function that reads the sensor temperature trend. + * @ops: struct thermal_zone_of_device_ops *. Must contain at least .get_temp. * * This function will search the list of thermal zones described in device * tree and look for the zone that refer to the sensor device pointed by @@ -382,9 +458,8 @@ thermal_zone_of_add_sensor(struct device_node *zone, * check the return value with help of IS_ERR() helper. */ struct thermal_zone_device * -thermal_zone_of_sensor_register(struct device *dev, int sensor_id, - void *data, int (*get_temp)(void *, long *), - int (*get_trend)(void *, long *)) +thermal_zone_of_sensor_register(struct device *dev, int sensor_id, void *data, + const struct thermal_zone_of_device_ops *ops) { struct device_node *np, *child, *sensor_np; struct thermal_zone_device *tzd = ERR_PTR(-ENODEV); @@ -426,9 +501,10 @@ thermal_zone_of_sensor_register(struct device *dev, int sensor_id, if (sensor_specs.np == sensor_np && id == sensor_id) { tzd = thermal_zone_of_add_sensor(child, sensor_np, - data, - get_temp, - get_trend); + data, ops); + if (!IS_ERR(tzd)) + tzd->ops->set_mode(tzd, THERMAL_DEVICE_ENABLED); + of_node_put(sensor_specs.np); of_node_put(child); goto exit; @@ -475,9 +551,9 @@ void thermal_zone_of_sensor_unregister(struct device *dev, mutex_lock(&tzd->lock); tzd->ops->get_temp = NULL; tzd->ops->get_trend = NULL; + tzd->ops->set_emul_temp = NULL; - tz->get_temp = NULL; - tz->get_trend = NULL; + tz->ops = NULL; tz->sensor_data = NULL; mutex_unlock(&tzd->lock); } @@ -501,7 +577,7 @@ EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_unregister); */ static int thermal_of_populate_bind_params(struct device_node *np, struct __thermal_bind_params *__tbp, - struct __thermal_trip *trips, + struct thermal_trip *trips, int ntrips) { struct of_phandle_args cooling_spec; @@ -510,7 +586,7 @@ static int thermal_of_populate_bind_params(struct device_node *np, u32 prop; /* Default weight. Usage is optional */ - __tbp->usage = 0; + __tbp->usage = THERMAL_WEIGHT_DEFAULT; ret = of_property_read_u32(np, "contribution", &prop); if (ret == 0) __tbp->usage = prop; @@ -604,7 +680,7 @@ static int thermal_of_get_trip_type(struct device_node *np, * Return: 0 on success, proper error code otherwise */ static int thermal_of_populate_trip(struct device_node *np, - struct __thermal_trip *trip) + struct thermal_trip *trip) { int prop; int ret; @@ -644,7 +720,7 @@ static int thermal_of_populate_trip(struct device_node *np, * @np parameter and fills the read data into a __thermal_zone data structure * and return this pointer. * - * TODO: Missing properties to parse: thermal-sensor-names and coefficients + * TODO: Missing properties to parse: thermal-sensor-names * * Return: On success returns a valid struct __thermal_zone, * otherwise, it returns a corresponding ERR_PTR(). Caller must @@ -656,7 +732,7 @@ thermal_of_build_thermal_zone(struct device_node *np) struct device_node *child = NULL, *gchild; struct __thermal_zone *tz; int ret, i; - u32 prop; + u32 prop, coef[2]; if (!np) { pr_err("no thermal zone np\n"); @@ -681,6 +757,20 @@ thermal_of_build_thermal_zone(struct device_node *np) } tz->polling_delay = prop; + /* + * REVIST: for now, the thermal framework supports only + * one sensor per thermal zone. Thus, we are considering + * only the first two values as slope and offset. + */ + ret = of_property_read_u32_array(np, "coefficients", coef, 2); + if (ret == 0) { + tz->slope = coef[0]; + tz->offset = coef[1]; + } else { + tz->slope = 1; + tz->offset = 0; + } + /* trips */ child = of_get_child_by_name(np, "trips"); @@ -794,6 +884,8 @@ int __init of_parse_thermal_zones(void) for_each_child_of_node(np, child) { struct thermal_zone_device *zone; struct thermal_zone_params *tzp; + int i, mask = 0; + u32 prop; /* Check whether child is enabled or not */ if (!of_device_is_available(child)) @@ -820,8 +912,18 @@ int __init of_parse_thermal_zones(void) /* No hwmon because there might be hwmon drivers registering */ tzp->no_hwmon = true; + if (!of_property_read_u32(child, "sustainable-power", &prop)) + tzp->sustainable_power = prop; + + for (i = 0; i < tz->ntrips; i++) + mask |= 1 << i; + + /* these two are left for temperature drivers to use */ + tzp->slope = tz->slope; + tzp->offset = tz->offset; + zone = thermal_zone_device_register(child->name, tz->ntrips, - 0, tz, + mask, tz, ops, tzp, tz->passive_delay, tz->polling_delay); |