diff options
Diffstat (limited to 'drivers/tty')
-rw-r--r-- | drivers/tty/n_tty.c | 15 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_core.c | 8 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 82 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_pnp.c | 11 | ||||
-rw-r--r-- | drivers/tty/serial/amba-pl011.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/atmel_serial.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/men_z135_uart.c | 9 | ||||
-rw-r--r-- | drivers/tty/serial/samsung.c | 47 | ||||
-rw-r--r-- | drivers/tty/serial/samsung.h | 1 | ||||
-rw-r--r-- | drivers/tty/tty_io.c | 31 |
10 files changed, 151 insertions, 59 deletions
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 16ed0b6c7f9c..6b6c6606af5f 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -343,8 +343,7 @@ static void n_tty_packet_mode_flush(struct tty_struct *tty) spin_lock_irqsave(&tty->ctrl_lock, flags); tty->ctrl_status |= TIOCPKT_FLUSHREAD; spin_unlock_irqrestore(&tty->ctrl_lock, flags); - if (waitqueue_active(&tty->link->read_wait)) - wake_up_interruptible(&tty->link->read_wait); + wake_up_interruptible(&tty->link->read_wait); } } @@ -1383,8 +1382,7 @@ handle_newline: put_tty_queue(c, ldata); smp_store_release(&ldata->canon_head, ldata->read_head); kill_fasync(&tty->fasync, SIGIO, POLL_IN); - if (waitqueue_active(&tty->read_wait)) - wake_up_interruptible_poll(&tty->read_wait, POLLIN); + wake_up_interruptible_poll(&tty->read_wait, POLLIN); return 0; } } @@ -1670,8 +1668,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, if ((read_cnt(ldata) >= ldata->minimum_to_wake) || L_EXTPROC(tty)) { kill_fasync(&tty->fasync, SIGIO, POLL_IN); - if (waitqueue_active(&tty->read_wait)) - wake_up_interruptible_poll(&tty->read_wait, POLLIN); + wake_up_interruptible_poll(&tty->read_wait, POLLIN); } } @@ -1890,10 +1887,8 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) } /* The termios change make the tty ready for I/O */ - if (waitqueue_active(&tty->write_wait)) - wake_up_interruptible(&tty->write_wait); - if (waitqueue_active(&tty->read_wait)) - wake_up_interruptible(&tty->read_wait); + wake_up_interruptible(&tty->write_wait); + wake_up_interruptible(&tty->read_wait); } /** diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 822a2e1975aa..2098d5ff5252 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -349,6 +349,14 @@ configured less than Maximum supported fifo bytes */ UART_FCR7_64BYTE, .flags = UART_CAP_FIFO, }, + [PORT_RT2880] = { + .name = "Palmchip BK-3103", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .rxtrig_bytes = {1, 4, 8, 14}, + .flags = UART_CAP_FIFO, + }, }; /* Uart divisor latch read */ diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 46bcebba54b2..9373cca121d3 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -2000,6 +2000,12 @@ pci_wch_ch38x_setup(struct serial_private *priv, #define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358 +#define PCI_VENDOR_ID_PERICOM 0x12D8 +#define PCI_DEVICE_ID_PERICOM_PI7C9X7951 0x7951 +#define PCI_DEVICE_ID_PERICOM_PI7C9X7952 0x7952 +#define PCI_DEVICE_ID_PERICOM_PI7C9X7954 0x7954 +#define PCI_DEVICE_ID_PERICOM_PI7C9X7958 0x7958 + /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588 @@ -2314,27 +2320,12 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { * Pericom */ { - .vendor = 0x12d8, - .device = 0x7952, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = pci_pericom_setup, - }, - { - .vendor = 0x12d8, - .device = 0x7954, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = pci_pericom_setup, - }, - { - .vendor = 0x12d8, - .device = 0x7958, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = pci_pericom_setup, + .vendor = PCI_VENDOR_ID_PERICOM, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_pericom_setup, }, - /* * PLX */ @@ -3031,6 +3022,10 @@ enum pci_board_num_t { pbn_fintek_8, pbn_fintek_12, pbn_wch384_4, + pbn_pericom_PI7C9X7951, + pbn_pericom_PI7C9X7952, + pbn_pericom_PI7C9X7954, + pbn_pericom_PI7C9X7958, }; /* @@ -3848,7 +3843,6 @@ static struct pciserial_board pci_boards[] = { .base_baud = 115200, .first_offset = 0x40, }, - [pbn_wch384_4] = { .flags = FL_BASE0, .num_ports = 4, @@ -3856,6 +3850,33 @@ static struct pciserial_board pci_boards[] = { .uart_offset = 8, .first_offset = 0xC0, }, + /* + * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART + */ + [pbn_pericom_PI7C9X7951] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 0x8, + }, + [pbn_pericom_PI7C9X7952] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x8, + }, + [pbn_pericom_PI7C9X7954] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x8, + }, + [pbn_pericom_PI7C9X7958] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 0x8, + }, }; static const struct pci_device_id blacklist[] = { @@ -5117,6 +5138,25 @@ static struct pci_device_id serial_pci_tbl[] = { 0, 0, pbn_exar_XR17V8358 }, /* + * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART + */ + { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7951, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_pericom_PI7C9X7951 }, + { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7952, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_pericom_PI7C9X7952 }, + { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7954, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_PERICOM, PCI_DEVICE_ID_PERICOM_PI7C9X7958, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_pericom_PI7C9X7958 }, + /* * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke) */ { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560, diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c index 50a09cd76d50..658b392d1170 100644 --- a/drivers/tty/serial/8250/8250_pnp.c +++ b/drivers/tty/serial/8250/8250_pnp.c @@ -41,6 +41,12 @@ static const struct pnp_device_id pnp_dev_table[] = { { "AEI1240", 0 }, /* Rockwell 56K ACF II Fax+Data+Voice Modem */ { "AKY1021", 0 /*SPCI_FL_NO_SHIRQ*/ }, + /* + * ALi Fast Infrared Controller + * Native driver (ali-ircc) is broken so at least + * it can be used with irtty-sir. + */ + { "ALI5123", 0 }, /* AZT3005 PnP SOUND DEVICE */ { "AZT4001", 0 }, /* Best Data Products Inc. Smart One 336F PnP Modem */ @@ -364,6 +370,11 @@ static const struct pnp_device_id pnp_dev_table[] = { /* Winbond CIR port, should not be probed. We should keep track of it to prevent the legacy serial driver from probing it */ { "WEC1022", CIR_PORT }, + /* + * SMSC IrCC SIR/FIR port, should not be probed by serial driver + * as well so its own driver can bind to it. + */ + { "SMCF010", CIR_PORT }, { "", 0 } }; diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 841c42ae19aa..52f45f3029b7 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -1360,9 +1360,9 @@ static void pl011_tx_softirq(struct work_struct *work) struct uart_amba_port *uap = container_of(dwork, struct uart_amba_port, tx_softirq_work); - spin_lock(&uap->port.lock); + spin_lock_irq(&uap->port.lock); while (pl011_tx_chars(uap)) ; - spin_unlock(&uap->port.lock); + spin_unlock_irq(&uap->port.lock); } static void pl011_tx_irq_seen(struct uart_amba_port *uap) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 5ca1dfb0561c..85323ff75edf 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -2640,7 +2640,7 @@ static int atmel_serial_probe(struct platform_device *pdev) ret = atmel_init_gpios(port, &pdev->dev); if (ret < 0) { dev_err(&pdev->dev, "Failed to initialize GPIOs."); - goto err; + goto err_clear_bit; } ret = atmel_init_port(port, pdev); diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c index 35c55505b3eb..5a41b8fbb10a 100644 --- a/drivers/tty/serial/men_z135_uart.c +++ b/drivers/tty/serial/men_z135_uart.c @@ -392,7 +392,6 @@ static irqreturn_t men_z135_intr(int irq, void *data) struct men_z135_port *uart = (struct men_z135_port *)data; struct uart_port *port = &uart->port; bool handled = false; - unsigned long flags; int irq_id; uart->stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG); @@ -401,7 +400,7 @@ static irqreturn_t men_z135_intr(int irq, void *data) if (!irq_id) goto out; - spin_lock_irqsave(&port->lock, flags); + spin_lock(&port->lock); /* It's save to write to IIR[7:6] RXC[9:8] */ iowrite8(irq_id, port->membase + MEN_Z135_STAT_REG); @@ -427,7 +426,7 @@ static irqreturn_t men_z135_intr(int irq, void *data) handled = true; } - spin_unlock_irqrestore(&port->lock, flags); + spin_unlock(&port->lock); out: return IRQ_RETVAL(handled); } @@ -717,7 +716,7 @@ static void men_z135_set_termios(struct uart_port *port, baud = uart_get_baud_rate(port, termios, old, 0, uart_freq / 16); - spin_lock(&port->lock); + spin_lock_irq(&port->lock); if (tty_termios_baud_rate(termios)) tty_termios_encode_baud_rate(termios, baud, baud); @@ -725,7 +724,7 @@ static void men_z135_set_termios(struct uart_port *port, iowrite32(bd_reg, port->membase + MEN_Z135_BAUD_REG); uart_update_timeout(port, termios->c_cflag, baud); - spin_unlock(&port->lock); + spin_unlock_irq(&port->lock); } static const char *men_z135_type(struct uart_port *port) diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index a0ae942d9562..1e0d9b8c48c9 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -295,15 +295,6 @@ static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport, if (ourport->tx_mode != S3C24XX_TX_DMA) enable_tx_dma(ourport); - while (xmit->tail & (dma_get_cache_alignment() - 1)) { - if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull) - return 0; - wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - count--; - } - dma->tx_size = count & ~(dma_get_cache_alignment() - 1); dma->tx_transfer_addr = dma->tx_addr + xmit->tail; @@ -342,7 +333,9 @@ static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport) return; } - if (!ourport->dma || !ourport->dma->tx_chan || count < port->fifosize) + if (!ourport->dma || !ourport->dma->tx_chan || + count < ourport->min_dma_size || + xmit->tail & (dma_get_cache_alignment() - 1)) s3c24xx_serial_start_tx_pio(ourport); else s3c24xx_serial_start_tx_dma(ourport, count); @@ -736,15 +729,20 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) struct uart_port *port = &ourport->port; struct circ_buf *xmit = &port->state->xmit; unsigned long flags; - int count; + int count, dma_count = 0; spin_lock_irqsave(&port->lock, flags); count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); - if (ourport->dma && ourport->dma->tx_chan && count >= port->fifosize) { - s3c24xx_serial_start_tx_dma(ourport, count); - goto out; + if (ourport->dma && ourport->dma->tx_chan && + count >= ourport->min_dma_size) { + int align = dma_get_cache_alignment() - + (xmit->tail & (dma_get_cache_alignment() - 1)); + if (count-align >= ourport->min_dma_size) { + dma_count = count-align; + count = align; + } } if (port->x_char) { @@ -765,14 +763,24 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) /* try and drain the buffer... */ - count = port->fifosize; - while (!uart_circ_empty(xmit) && count-- > 0) { + if (count > port->fifosize) { + count = port->fifosize; + dma_count = 0; + } + + while (!uart_circ_empty(xmit) && count > 0) { if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull) break; wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); port->icount.tx++; + count--; + } + + if (!count && dma_count) { + s3c24xx_serial_start_tx_dma(ourport, dma_count); + goto out; } if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) { @@ -1838,6 +1846,13 @@ static int s3c24xx_serial_probe(struct platform_device *pdev) else if (ourport->info->fifosize) ourport->port.fifosize = ourport->info->fifosize; + /* + * DMA transfers must be aligned at least to cache line size, + * so find minimal transfer size suitable for DMA mode + */ + ourport->min_dma_size = max_t(int, ourport->port.fifosize, + dma_get_cache_alignment()); + probe_index++; dbg("%s: initialising port %p...\n", __func__, ourport); diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h index d275032aa68d..fc5deaa4f382 100644 --- a/drivers/tty/serial/samsung.h +++ b/drivers/tty/serial/samsung.h @@ -82,6 +82,7 @@ struct s3c24xx_uart_port { unsigned char tx_claimed; unsigned int pm_level; unsigned long baudclk_rate; + unsigned int min_dma_size; unsigned int rx_irq; unsigned int tx_irq; diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index e5695467598f..21837f14a403 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -2144,8 +2144,24 @@ retry_open: if (!noctty && current->signal->leader && !current->signal->tty && - tty->session == NULL) - __proc_set_tty(tty); + tty->session == NULL) { + /* + * Don't let a process that only has write access to the tty + * obtain the privileges associated with having a tty as + * controlling terminal (being able to reopen it with full + * access through /dev/tty, being able to perform pushback). + * Many distributions set the group of all ttys to "tty" and + * grant write-only access to all terminals for setgid tty + * binaries, which should not imply full privileges on all ttys. + * + * This could theoretically break old code that performs open() + * on a write-only file descriptor. In that case, it might be + * necessary to also permit this if + * inode_permission(inode, MAY_READ) == 0. + */ + if (filp->f_mode & FMODE_READ) + __proc_set_tty(tty); + } spin_unlock_irq(¤t->sighand->siglock); read_unlock(&tasklist_lock); tty_unlock(tty); @@ -2434,7 +2450,7 @@ static int fionbio(struct file *file, int __user *p) * Takes ->siglock() when updating signal->tty */ -static int tiocsctty(struct tty_struct *tty, int arg) +static int tiocsctty(struct tty_struct *tty, struct file *file, int arg) { int ret = 0; @@ -2468,6 +2484,13 @@ static int tiocsctty(struct tty_struct *tty, int arg) goto unlock; } } + + /* See the comment in tty_open(). */ + if ((file->f_mode & FMODE_READ) == 0 && !capable(CAP_SYS_ADMIN)) { + ret = -EPERM; + goto unlock; + } + proc_set_tty(tty); unlock: read_unlock(&tasklist_lock); @@ -2860,7 +2883,7 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg) no_tty(); return 0; case TIOCSCTTY: - return tiocsctty(tty, arg); + return tiocsctty(tty, file, arg); case TIOCGPGRP: return tiocgpgrp(tty, real_tty, p); case TIOCSPGRP: |