1 files changed, 81 insertions, 69 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 85e03cb0c418..ea9475fe20df 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -124,6 +124,10 @@ struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev)
 
 static int usb_device_supports_lpm(struct usb_device *udev)
 {
+	/* Some devices have trouble with LPM */
+	if (udev->quirks & USB_QUIRK_NO_LPM)
+		return 0;
+
 	/* USB 2.1 (and greater) devices indicate LPM support through
 	 * their USB 2.0 Extended Capabilities BOS descriptor.
 	 */
@@ -1030,10 +1034,20 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	unsigned delay;
 
 	/* Continue a partial initialization */
-	if (type == HUB_INIT2)
-		goto init2;
-	if (type == HUB_INIT3)
+	if (type == HUB_INIT2 || type == HUB_INIT3) {
+		device_lock(hub->intfdev);
+
+		/* Was the hub disconnected while we were waiting? */
+		if (hub->disconnected) {
+			device_unlock(hub->intfdev);
+			kref_put(&hub->kref, hub_release);
+			return;
+		}
+		if (type == HUB_INIT2)
+			goto init2;
 		goto init3;
+	}
+	kref_get(&hub->kref);
 
 	/* The superspeed hub except for root hub has to use Hub Depth
 	 * value as an offset into the route string to locate the bits
@@ -1231,6 +1245,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			queue_delayed_work(system_power_efficient_wq,
 					&hub->init_work,
 					msecs_to_jiffies(delay));
+			device_unlock(hub->intfdev);
 			return;		/* Continues at init3: below */
 		} else {
 			msleep(delay);
@@ -1252,6 +1267,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	/* Allow autosuspend if it was suppressed */
 	if (type <= HUB_INIT3)
 		usb_autopm_put_interface_async(to_usb_interface(hub->intfdev));
+
+	if (type == HUB_INIT2 || type == HUB_INIT3)
+		device_unlock(hub->intfdev);
+
+	kref_put(&hub->kref, hub_release);
 }
 
 /* Implement the continuations for the delays above */
@@ -2046,7 +2066,7 @@ static void choose_devnum(struct usb_device *udev)
 	struct usb_bus	*bus = udev->bus;
 
 	/* be safe when more hub events are proceed in parallel */
-	mutex_lock(&bus->usb_address0_mutex);
+	mutex_lock(&bus->devnum_next_mutex);
 	if (udev->wusb) {
 		devnum = udev->portnum + 1;
 		BUG_ON(test_bit(devnum, bus->devmap.devicemap));
@@ -2064,7 +2084,7 @@ static void choose_devnum(struct usb_device *udev)
 		set_bit(devnum, bus->devmap.devicemap);
 		udev->devnum = devnum;
 	}
-	mutex_unlock(&bus->usb_address0_mutex);
+	mutex_unlock(&bus->devnum_next_mutex);
 }
 
 static void release_devnum(struct usb_device *udev)
@@ -2613,9 +2633,6 @@ static bool use_new_scheme(struct usb_device *udev, int retry)
 	return USE_NEW_SCHEME(retry);
 }
 
-static int hub_port_reset(struct usb_hub *hub, int port1,
-			struct usb_device *udev, unsigned int delay, bool warm);
-
 /* Is a USB 3.0 port in the Inactive or Compliance Mode state?
  * Port worm reset is required to recover
  */
@@ -2703,44 +2720,6 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
 	return 0;
 }
 
-static void hub_port_finish_reset(struct usb_hub *hub, int port1,
-			struct usb_device *udev, int *status)
-{
-	switch (*status) {
-	case 0:
-		/* TRSTRCY = 10 ms; plus some extra */
-		msleep(10 + 40);
-		if (udev) {
-			struct usb_hcd *hcd = bus_to_hcd(udev->bus);
-
-			update_devnum(udev, 0);
-			/* The xHC may think the device is already reset,
-			 * so ignore the status.
-			 */
-			if (hcd->driver->reset_device)
-				hcd->driver->reset_device(hcd, udev);
-		}
-		/* FALL THROUGH */
-	case -ENOTCONN:
-	case -ENODEV:
-		usb_clear_port_feature(hub->hdev,
-				port1, USB_PORT_FEAT_C_RESET);
-		if (hub_is_superspeed(hub->hdev)) {
-			usb_clear_port_feature(hub->hdev, port1,
-					USB_PORT_FEAT_C_BH_PORT_RESET);
-			usb_clear_port_feature(hub->hdev, port1,
-					USB_PORT_FEAT_C_PORT_LINK_STATE);
-			usb_clear_port_feature(hub->hdev, port1,
-					USB_PORT_FEAT_C_CONNECTION);
-		}
-		if (udev)
-			usb_set_device_state(udev, *status
-					? USB_STATE_NOTATTACHED
-					: USB_STATE_DEFAULT);
-		break;
-	}
-}
-
 /* Handle port reset and port warm(BH) reset (for USB3 protocol ports) */
 static int hub_port_reset(struct usb_hub *hub, int port1,
 			struct usb_device *udev, unsigned int delay, bool warm)
@@ -2764,13 +2743,10 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 		 * If the caller hasn't explicitly requested a warm reset,
 		 * double check and see if one is needed.
 		 */
-		status = hub_port_status(hub, port1,
-					&portstatus, &portchange);
-		if (status < 0)
-			goto done;
-
-		if (hub_port_warm_reset_required(hub, port1, portstatus))
-			warm = true;
+		if (hub_port_status(hub, port1, &portstatus, &portchange) == 0)
+			if (hub_port_warm_reset_required(hub, port1,
+							portstatus))
+				warm = true;
 	}
 	clear_bit(port1, hub->warm_reset_bits);
 
@@ -2796,11 +2772,19 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 
 		/* Check for disconnect or reset */
 		if (status == 0 || status == -ENOTCONN || status == -ENODEV) {
-			hub_port_finish_reset(hub, port1, udev, &status);
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_RESET);
 
 			if (!hub_is_superspeed(hub->hdev))
 				goto done;
 
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_BH_PORT_RESET);
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_PORT_LINK_STATE);
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_CONNECTION);
+
 			/*
 			 * If a USB 3.0 device migrates from reset to an error
 			 * state, re-issue the warm reset.
@@ -2833,6 +2817,26 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
 	dev_err(&port_dev->dev, "Cannot enable. Maybe the USB cable is bad?\n");
 
 done:
+	if (status == 0) {
+		/* TRSTRCY = 10 ms; plus some extra */
+		msleep(10 + 40);
+		if (udev) {
+			struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+			update_devnum(udev, 0);
+			/* The xHC may think the device is already reset,
+			 * so ignore the status.
+			 */
+			if (hcd->driver->reset_device)
+				hcd->driver->reset_device(hcd, udev);
+
+			usb_set_device_state(udev, USB_STATE_DEFAULT);
+		}
+	} else {
+		if (udev)
+			usb_set_device_state(udev, USB_STATE_NOTATTACHED);
+	}
+
 	if (!hub_is_superspeed(hub->hdev))
 		up_read(&ehci_cf_port_reset_rwsem);
 
@@ -4238,7 +4242,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 {
 	struct usb_device	*hdev = hub->hdev;
 	struct usb_hcd		*hcd = bus_to_hcd(hdev->bus);
-	int			i, j, retval;
+	int			retries, operations, retval, i;
 	unsigned		delay = HUB_SHORT_RESET_TIME;
 	enum usb_device_speed	oldspeed = udev->speed;
 	const char		*speed;
@@ -4258,7 +4262,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	if (oldspeed == USB_SPEED_LOW)
 		delay = HUB_LONG_RESET_TIME;
 
-	mutex_lock(&hdev->bus->usb_address0_mutex);
+	mutex_lock(hcd->address0_mutex);
 
 	/* Reset the device; full speed may morph to high speed */
 	/* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
@@ -4340,7 +4344,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	 * first 8 bytes of the device descriptor to get the ep0 maxpacket
 	 * value.
 	 */
-	for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) {
+	for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) {
 		bool did_new_scheme = false;
 
 		if (use_new_scheme(udev, retry_counter)) {
@@ -4367,7 +4371,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 			 * 255 is for WUSB devices, we actually need to use
 			 * 512 (WUSB1.0[4.8.1]).
 			 */
-			for (j = 0; j < 3; ++j) {
+			for (operations = 0; operations < 3; ++operations) {
 				buf->bMaxPacketSize0 = 0;
 				r = usb_control_msg(udev, usb_rcvaddr0pipe(),
 					USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
@@ -4387,7 +4391,13 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 						r = -EPROTO;
 					break;
 				}
-				if (r == 0)
+				/*
+				 * Some devices time out if they are powered on
+				 * when already connected. They need a second
+				 * reset. But only on the first attempt,
+				 * lest we get into a time out/reset loop
+				 */
+				if (r == 0  || (r == -ETIMEDOUT && retries == 0))
 					break;
 			}
 			udev->descriptor.bMaxPacketSize0 =
@@ -4419,7 +4429,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 		 * authorization will assign the final address.
 		 */
 		if (udev->wusb == 0) {
-			for (j = 0; j < SET_ADDRESS_TRIES; ++j) {
+			for (operations = 0; operations < SET_ADDRESS_TRIES; ++operations) {
 				retval = hub_set_address(udev, devnum);
 				if (retval >= 0)
 					break;
@@ -4514,6 +4524,8 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 		goto fail;
 	}
 
+	usb_detect_quirks(udev);
+
 	if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) {
 		retval = usb_get_bos_descriptor(udev);
 		if (!retval) {
@@ -4532,7 +4544,7 @@ fail:
 		hub_port_disable(hub, port1, 0);
 		update_devnum(udev, devnum);	/* for disconnect processing */
 	}
-	mutex_unlock(&hdev->bus->usb_address0_mutex);
+	mutex_unlock(hcd->address0_mutex);
 	return retval;
 }
 
@@ -4708,7 +4720,6 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		if (status < 0)
 			goto loop;
 
-		usb_detect_quirks(udev);
 		if (udev->quirks & USB_QUIRK_DELAY_INIT)
 			msleep(1000);
 
@@ -5340,9 +5351,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 	if (udev->usb2_hw_lpm_enabled == 1)
 		usb_set_usb2_hardware_lpm(udev, 0);
 
-	bos = udev->bos;
-	udev->bos = NULL;
-
 	/* Disable LPM and LTM while we reset the device and reinstall the alt
 	 * settings.  Device-initiated LPM settings, and system exit latency
 	 * settings are cleared when the device is reset, so we have to set
@@ -5351,15 +5359,18 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 	ret = usb_unlocked_disable_lpm(udev);
 	if (ret) {
 		dev_err(&udev->dev, "%s Failed to disable LPM\n.", __func__);
-		goto re_enumerate;
+		goto re_enumerate_no_bos;
 	}
 	ret = usb_disable_ltm(udev);
 	if (ret) {
 		dev_err(&udev->dev, "%s Failed to disable LTM\n.",
 				__func__);
-		goto re_enumerate;
+		goto re_enumerate_no_bos;
 	}
 
+	bos = udev->bos;
+	udev->bos = NULL;
+
 	for (i = 0; i < SET_CONFIG_TRIES; ++i) {
 
 		/* ep0 maxpacket size may change; let the HCD know about it.
@@ -5456,10 +5467,11 @@ done:
 	return 0;
 
 re_enumerate:
-	/* LPM state doesn't matter when we're about to destroy the device. */
-	hub_port_logical_disconnect(parent_hub, port1);
 	usb_release_bos_descriptor(udev);
 	udev->bos = bos;
+re_enumerate_no_bos:
+	/* LPM state doesn't matter when we're about to destroy the device. */
+	hub_port_logical_disconnect(parent_hub, port1);
 	return -ENODEV;
 }