diff options
Diffstat (limited to 'drivers/usb/host')
| -rw-r--r-- | drivers/usb/host/xhci-hub.c | 16 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-mem.c | 3 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-ring.c | 2 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.c | 3 |
4 files changed, 19 insertions, 5 deletions
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 7ff97c39c8b4..8bdfb38782f8 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -484,10 +484,13 @@ static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci, u32 pls = status_reg & PORT_PLS_MASK; /* resume state is a xHCI internal state. - * Do not report it to usb core. + * Do not report it to usb core, instead, pretend to be U3, + * thus usb core knows it's not ready for transfer */ - if (pls == XDEV_RESUME) + if (pls == XDEV_RESUME) { + *status |= USB_SS_PORT_LS_U3; return; + } /* When the CAS bit is set then warm reset * should be performed on port @@ -588,7 +591,14 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, status |= USB_PORT_STAT_C_RESET << 16; /* USB3.0 only */ if (hcd->speed == HCD_USB3) { - if ((raw_port_status & PORT_PLC)) + /* Port link change with port in resume state should not be + * reported to usbcore, as this is an internal state to be + * handled by xhci driver. Reporting PLC to usbcore may + * cause usbcore clearing PLC first and port change event + * irq won't be generated. + */ + if ((raw_port_status & PORT_PLC) && + (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME) status |= USB_PORT_STAT_C_LINK_STATE << 16; if ((raw_port_status & PORT_WRC)) status |= USB_PORT_STAT_C_BH_RESET << 16; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index a67018eddf41..d44c904df055 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1796,7 +1796,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) int size; int i, j, num_ports; - del_timer_sync(&xhci->cmd_timer); + if (timer_pending(&xhci->cmd_timer)) + del_timer_sync(&xhci->cmd_timer); /* Free the Event Ring Segment Table and the actual Event Ring */ size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 9848a67ddbbe..c70291cffc27 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -82,7 +82,7 @@ dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, return 0; /* offset in TRBs */ segment_offset = trb - seg->trbs; - if (segment_offset > TRBS_PER_SEGMENT) + if (segment_offset >= TRBS_PER_SEGMENT) return 0; return seg->dma + (segment_offset * sizeof(*trb)); } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 3bceabe109f7..8e5f46082316 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3457,6 +3457,9 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) return -EINVAL; } + if (virt_dev->tt_info) + old_active_eps = virt_dev->tt_info->active_eps; + if (virt_dev->udev != udev) { /* If the virt_dev and the udev does not match, this virt_dev * may belong to another udev. |