diff options
Diffstat (limited to 'include')
-rw-r--r-- | include/net/cfg80211.h | 40 | ||||
-rw-r--r-- | include/uapi/linux/nl80211.h | 42 |
2 files changed, 77 insertions, 5 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index fa4f0f793817..e2658e392a1f 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1424,6 +1424,21 @@ struct cfg80211_ssid { }; /** + * struct cfg80211_scan_info - information about completed scan + * @scan_start_tsf: scan start time in terms of the TSF of the BSS that the + * wireless device that requested the scan is connected to. If this + * information is not available, this field is left zero. + * @tsf_bssid: the BSSID according to which %scan_start_tsf is set. + * @aborted: set to true if the scan was aborted for any reason, + * userspace will be notified of that + */ +struct cfg80211_scan_info { + u64 scan_start_tsf; + u8 tsf_bssid[ETH_ALEN] __aligned(2); + bool aborted; +}; + +/** * struct cfg80211_scan_request - scan request description * * @ssids: SSIDs to scan for (active scan only) @@ -1433,12 +1448,17 @@ struct cfg80211_ssid { * @scan_width: channel width for scanning * @ie: optional information element(s) to add into Probe Request or %NULL * @ie_len: length of ie in octets + * @duration: how long to listen on each channel, in TUs. If + * %duration_mandatory is not set, this is the maximum dwell time and + * the actual dwell time may be shorter. + * @duration_mandatory: if set, the scan duration must be as specified by the + * %duration field. * @flags: bit field of flags controlling operation * @rates: bitmap of rates to advertise for each band * @wiphy: the wiphy this was for * @scan_start: time (in jiffies) when the scan started * @wdev: the wireless device to scan for - * @aborted: (internal) scan request was notified as aborted + * @info: (internal) information about completed scan * @notified: (internal) scan request was notified as done or aborted * @no_cck: used to send probe requests at non CCK rate in 2GHz band * @mac_addr: MAC address used with randomisation @@ -1454,6 +1474,8 @@ struct cfg80211_scan_request { enum nl80211_bss_scan_width scan_width; const u8 *ie; size_t ie_len; + u16 duration; + bool duration_mandatory; u32 flags; u32 rates[NUM_NL80211_BANDS]; @@ -1467,7 +1489,8 @@ struct cfg80211_scan_request { /* internal */ struct wiphy *wiphy; unsigned long scan_start; - bool aborted, notified; + struct cfg80211_scan_info info; + bool notified; bool no_cck; /* keep last */ @@ -1600,12 +1623,19 @@ enum cfg80211_signal_type { * buffered on the device) and be accurate to about 10ms. * If the frame isn't buffered, just passing the return value of * ktime_get_boot_ns() is likely appropriate. + * @parent_tsf: the time at the start of reception of the first octet of the + * timestamp field of the frame. The time is the TSF of the BSS specified + * by %parent_bssid. + * @parent_bssid: the BSS according to which %parent_tsf is set. This is set to + * the BSS that requested the scan in which the beacon/probe was received. */ struct cfg80211_inform_bss { struct ieee80211_channel *chan; enum nl80211_bss_scan_width scan_width; s32 signal; u64 boottime_ns; + u64 parent_tsf; + u8 parent_bssid[ETH_ALEN] __aligned(2); }; /** @@ -4067,10 +4097,10 @@ const char *reg_initiator_name(enum nl80211_reg_initiator initiator); * cfg80211_scan_done - notify that scan finished * * @request: the corresponding scan request - * @aborted: set to true if the scan was aborted for any reason, - * userspace will be notified of that + * @info: information about the completed scan */ -void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted); +void cfg80211_scan_done(struct cfg80211_scan_request *request, + struct cfg80211_scan_info *info); /** * cfg80211_sched_scan_results - notify that new scan results are available diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 1d7da7888dcf..b39ccab45333 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1848,6 +1848,22 @@ enum nl80211_commands { * to turn that feature off set an invalid mac address * (e.g. FF:FF:FF:FF:FF:FF) * + * @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually + * started (u64). The time is the TSF of the BSS the interface that + * requested the scan is connected to (if available, otherwise this + * attribute must not be included). + * @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which + * %NL80211_ATTR_SCAN_START_TIME_TSF is set. + * @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If + * %NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the + * maximum measurement duration allowed. This attribute is used with + * measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN + * if the scan is used for beacon report radio measurement. + * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates + * that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is + * mandatory. If this flag is not set, the duration is the maximum duration + * and the actual measurement duration may be shorter. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2235,6 +2251,11 @@ enum nl80211_attrs { NL80211_ATTR_MU_MIMO_GROUP_DATA, NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR, + NL80211_ATTR_SCAN_START_TIME_TSF, + NL80211_ATTR_SCAN_START_TIME_TSF_BSSID, + NL80211_ATTR_MEASUREMENT_DURATION, + NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3496,6 +3517,12 @@ enum nl80211_bss_scan_width { * was last updated by a received frame. The value is expected to be * accurate to about 10ms. (u64, nanoseconds) * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment + * @NL80211_BSS_PARENT_TSF: the time at the start of reception of the first + * octet of the timestamp field of the last beacon/probe received for + * this BSS. The time is the TSF of the BSS specified by + * @NL80211_BSS_PARENT_BSSID. (u64). + * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF + * is set. * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -3517,6 +3544,8 @@ enum nl80211_bss { NL80211_BSS_PRESP_DATA, NL80211_BSS_LAST_SEEN_BOOTTIME, NL80211_BSS_PAD, + NL80211_BSS_PARENT_TSF, + NL80211_BSS_PARENT_BSSID, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -4507,6 +4536,16 @@ enum nl80211_feature_flags { * %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute, * or can be configured to follow a station by configuring the * %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute. + * @NL80211_EXT_FEATURE_SCAN_START_TIME: This driver includes the actual + * time the scan started in scan results event. The time is the TSF of + * the BSS that the interface that requested the scan is connected to + * (if available). + * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the + * time the last beacon/probe was received. The time is the TSF of the + * BSS that the interface that requested the scan is connected to + * (if available). + * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of + * channel dwell time. * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. @@ -4515,6 +4554,9 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_VHT_IBSS, NL80211_EXT_FEATURE_RRM, NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER, + NL80211_EXT_FEATURE_SCAN_START_TIME, + NL80211_EXT_FEATURE_BSS_PARENT_TSF, + NL80211_EXT_FEATURE_SET_SCAN_DWELL, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, |