aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-06-15ipv4/udp: Verify multicast group is ours in upd_v4_early_demux()Shawn Bohrer
[ Upstream commit 6e540309326188f769e03bb4c6dd8ff6752930c2 ] 421b3885bf6d56391297844f43fb7154a6396e12 "udp: ipv4: Add udp early demux" introduced a regression that allowed sockets bound to INADDR_ANY to receive packets from multicast groups that the socket had not joined. For example a socket that had joined 224.168.2.9 could also receive packets from 225.168.2.9 despite not having joined that group if ip_early_demux is enabled. Fix this by calling ip_check_mc_rcu() in udp_v4_early_demux() to verify that the multicast packet is indeed ours. Signed-off-by: Shawn Bohrer <sbohrer@rgmadvisors.com> Reported-by: Yurij M. Plotnikov <Yurij.Plotnikov@oktetlabs.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15xen: netback: read hotplug script once at start of day.Ian Campbell
[ Upstream commit 31a418986a5852034d520a5bab546821ff1ccf3d ] When we come to tear things down in netback_remove() and generate the uevent it is possible that the xenstore directory has already been removed (details below). In such cases netback_uevent() won't be able to read the hotplug script and will write a xenstore error node. A recent change to the hypervisor exposed this race such that we now sometimes lose it (where apparently we didn't ever before). Instead read the hotplug script configuration during setup and use it for the lifetime of the backend device. The apparently more obvious fix of moving the transition to state=Closed in netback_remove() to after the uevent does not work because it is possible that we are already in state=Closed (in reaction to the guest having disconnected as it shutdown). Being already in Closed means the toolstack is at liberty to start tearing down the xenstore directories. In principal it might be possible to arrange to unregister the device sooner (e.g on transition to Closing) such that xenstore would still be there but this state machine is fragile and prone to anger... A modern Xen system only relies on the hotplug uevent for driver domains, when the backend is in the same domain as the toolstack it will run the necessary setup/teardown directly in the correct sequence wrt xenstore changes. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15tcp: fix child sockets to use system default congestion control if not setNeal Cardwell
[ Upstream commit 9f950415e4e28e7cfae2e416b43e862e8101d996 ] Linux 3.17 and earlier are explicitly engineered so that if the app doesn't specifically request a CC module on a listener before the SYN arrives, then the child gets the system default CC when the connection is established. See tcp_init_congestion_control() in 3.17 or earlier, which says "if no choice made yet assign the current value set as default". The change ("net: tcp: assign tcp cong_ops when tcp sk is created") altered these semantics, so that children got their parent listener's congestion control even if the system default had changed after the listener was created. This commit returns to those original semantics from 3.17 and earlier, since they are the original semantics from 2007 in 4d4d3d1e8 ("[TCP]: Congestion control initialization."), and some Linux congestion control workflows depend on that. In summary, if a listener socket specifically sets TCP_CONGESTION to "x", or the route locks the CC module to "x", then the child gets "x". Otherwise the child gets current system default from net.ipv4.tcp_congestion_control. That's the behavior in 3.17 and earlier, and this commit restores that. Fixes: 55d8694fa82c ("net: tcp: assign tcp cong_ops when tcp sk is created") Cc: Florian Westphal <fw@strlen.de> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Glenn Judd <glenn.judd@morganstanley.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15udp: fix behavior of wrong checksumsEric Dumazet
[ Upstream commit beb39db59d14990e401e235faf66a6b9b31240b0 ] We have two problems in UDP stack related to bogus checksums : 1) We return -EAGAIN to application even if receive queue is not empty. This breaks applications using edge trigger epoll() 2) Under UDP flood, we can loop forever without yielding to other processes, potentially hanging the host, especially on non SMP. This patch is an attempt to make things better. We might in the future add extra support for rt applications wanting to better control time spent doing a recv() in a hostile environment. For example we could validate checksums before queuing packets in socket receive queue. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15bridge: fix br_multicast_query_expired() bugEric Dumazet
[ Upstream commit 71d9f6149cac8fc6646adfb2a6f3b0de6ddd23f6 ] br_multicast_query_expired() querier argument is a pointer to a struct bridge_mcast_querier : struct bridge_mcast_querier { struct br_ip addr; struct net_bridge_port __rcu *port; }; Intent of the code was to clear port field, not the pointer to querier. Fixes: 2cd4143192e8 ("bridge: memorize and export selected IGMP/MLD querier port") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Acked-by: Linus Lüssing <linus.luessing@c0d3.blue> Cc: Linus Lüssing <linus.luessing@web.de> Cc: Steinar H. Gunderson <sesse@samfundet.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15sctp: Fix mangled IPv4 addresses on a IPv6 listening socketJason Gunthorpe
[ Upstream commit 9302d7bb0c5cd46be5706859301f18c137b2439f ] sctp_v4_map_v6 was subtly writing and reading from members of a union in a way the clobbered data it needed to read before it read it. Zeroing the v6 flowinfo overwrites the v4 sin_addr with 0, meaning that every place that calls sctp_v4_map_v6 gets ::ffff:0.0.0.0 as the result. Reorder things to guarantee correct behaviour no matter what the union layout is. This impacts user space clients that open an IPv6 SCTP socket and receive IPv4 connections. Prior to 299ee user space would see a sockaddr with AF_INET and a correct address, after 299ee the sockaddr is AF_INET6, but the address is wrong. Fixes: 299ee123e198 (sctp: Fixup v4mapped behaviour to comply with Sock API) Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15net_sched: invoke ->attach() after setting dev->qdiscWANG Cong
[ Upstream commit 86e363dc3b50bfd50a1f315934583fbda673ab8d ] For mq qdisc, we add per tx queue qdisc to root qdisc for display purpose, however, that happens too early, before the new dev->qdisc is finally set, this causes q->list points to an old root qdisc which is going to be freed right before assigning with a new one. Fix this by moving ->attach() after setting dev->qdisc. For the record, this fixes the following crash: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 975 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98() list_del corruption. prev->next should be ffff8800d1998ae8, but was 6b6b6b6b6b6b6b6b CPU: 1 PID: 975 Comm: tc Not tainted 4.1.0-rc4+ #1019 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 0000000000000009 ffff8800d73fb928 ffffffff81a44e7f 0000000047574756 ffff8800d73fb978 ffff8800d73fb968 ffffffff810790da ffff8800cfc4cd20 ffffffff814e725b ffff8800d1998ae8 ffffffff82381250 0000000000000000 Call Trace: [<ffffffff81a44e7f>] dump_stack+0x4c/0x65 [<ffffffff810790da>] warn_slowpath_common+0x9c/0xb6 [<ffffffff814e725b>] ? __list_del_entry+0x5a/0x98 [<ffffffff81079162>] warn_slowpath_fmt+0x46/0x48 [<ffffffff81820eb0>] ? dev_graft_qdisc+0x5e/0x6a [<ffffffff814e725b>] __list_del_entry+0x5a/0x98 [<ffffffff814e72a7>] list_del+0xe/0x2d [<ffffffff81822f05>] qdisc_list_del+0x1e/0x20 [<ffffffff81820cd1>] qdisc_destroy+0x30/0xd6 [<ffffffff81822676>] qdisc_graft+0x11d/0x243 [<ffffffff818233c1>] tc_get_qdisc+0x1a6/0x1d4 [<ffffffff810b5eaf>] ? mark_lock+0x2e/0x226 [<ffffffff817ff8f5>] rtnetlink_rcv_msg+0x181/0x194 [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19 [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19 [<ffffffff817ff774>] ? __rtnl_unlock+0x17/0x17 [<ffffffff81855dc6>] netlink_rcv_skb+0x4d/0x93 [<ffffffff817ff756>] rtnetlink_rcv+0x26/0x2d [<ffffffff818544b2>] netlink_unicast+0xcb/0x150 [<ffffffff81161db9>] ? might_fault+0x59/0xa9 [<ffffffff81854f78>] netlink_sendmsg+0x4fa/0x51c [<ffffffff817d6e09>] sock_sendmsg_nosec+0x12/0x1d [<ffffffff817d8967>] sock_sendmsg+0x29/0x2e [<ffffffff817d8cf3>] ___sys_sendmsg+0x1b4/0x23a [<ffffffff8100a1b8>] ? native_sched_clock+0x35/0x37 [<ffffffff810a1d83>] ? sched_clock_local+0x12/0x72 [<ffffffff810a1fd4>] ? sched_clock_cpu+0x9e/0xb7 [<ffffffff810def2a>] ? current_kernel_time+0xe/0x32 [<ffffffff810b4bc5>] ? lock_release_holdtime.part.29+0x71/0x7f [<ffffffff810ddebf>] ? read_seqcount_begin.constprop.27+0x5f/0x76 [<ffffffff810b6292>] ? trace_hardirqs_on_caller+0x17d/0x199 [<ffffffff811b14d5>] ? __fget_light+0x50/0x78 [<ffffffff817d9808>] __sys_sendmsg+0x42/0x60 [<ffffffff817d9838>] SyS_sendmsg+0x12/0x1c [<ffffffff81a50e97>] system_call_fastpath+0x12/0x6f ---[ end trace ef29d3fb28e97ae7 ]--- For long term, we probably need to clean up the qdisc_graft() code in case it hides other bugs like this. Fixes: 95dc19299f74 ("pkt_sched: give visibility to mq slave qdiscs") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15xen/netback: Properly initialize credit_bytesRoss Lagerwall
[ Upstream commit ce0e5c522d3924090c20e774359809a7aa08c44c ] Commit e9ce7cb6b107 ("xen-netback: Factor queue-specific data into queue struct") introduced a regression when moving queue-specific data into the queue struct by failing to set the credit_bytes field. This prevented bandwidth limiting from working. Initialize the field as it was done before multiqueue support was added. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15unix/caif: sk_socket can disappear when state is unlockedMark Salyzyn
[ Upstream commit b48732e4a48d80ed4a14812f0bab09560846514e ] got a rare NULL pointer dereference in clear_bit Signed-off-by: Mark Salyzyn <salyzyn@android.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> ---- v2: switch to sock_flag(sk, SOCK_DEAD) and added net/caif/caif_socket.c v3: return -ECONNRESET in upstream caller of wait function for SOCK_DEAD Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15net: dp83640: fix improper double spin locking.Richard Cochran
[ Upstream commit adbe088f6f8b0b7701fe07f51fe6f2bd602a6665 ] A pair of nested spin locks was introduced in commit 63502b8d0 "dp83640: Fix receive timestamp race condition". Unfortunately the 'flags' parameter was reused for the inner lock, clobbering the originally saved IRQ state. This patch fixes the issue by changing the inner lock to plain spin_lock without irqsave. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15net: dp83640: reinforce locking rules.Richard Cochran
[ Upstream commit a935865c828c8cd20501f618c69f659a5b6d6a5f ] Callers of the ext_write function are supposed to hold a mutex that protects the state of the dialed page, but one caller was missing the lock from the very start, and over time the code has been changed without following the rule. This patch cleans up the call sites in violation of the rule. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15net: dp83640: fix broken calibration routine.Richard Cochran
[ Upstream commit 397a253af5031de4a4612210055935309af4472c ] Currently, the calibration function that corrects the initial offsets among multiple devices only works the first time. If the function is called more than once, the calibration fails and bogus offsets will be programmed into the devices. In a well hidden spot, the device documentation tells that trigger indexes 0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work. This patch fixes the issue by using one of the special triggers during the recalibration method. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15bridge: fix parsing of MLDv2 reportsThadeu Lima de Souza Cascardo
[ Upstream commit 47cc84ce0c2fe75c99ea5963c4b5704dd78ead54 ] When more than a multicast address is present in a MLDv2 report, all but the first address is ignored, because the code breaks out of the loop if there has not been an error adding that address. This has caused failures when two guests connected through the bridge tried to communicate using IPv6. Neighbor discoveries would not be transmitted to the other guest when both used a link-local address and a static address. This only happens when there is a MLDv2 querier in the network. The fix will only break out of the loop when there is a failure adding a multicast address. The mdb before the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::2 temp After the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::fb temp dev ovirtmgmt port bond0.86 grp ff02::2 temp dev ovirtmgmt port bond0.86 grp ff02::d temp dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp dev ovirtmgmt port bond0.86 grp ff02::16 temp dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp Fixes: 08b202b67264 ("bridge br_multicast: IPv6 MLD support.") Reported-by: Rik Theys <Rik.Theys@esat.kuleuven.be> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Tested-by: Rik Theys <Rik.Theys@esat.kuleuven.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15cdc_ncm: Fix tx_bytes statisticsBjørn Mork
[ Upstream commit 44f6731d8b68fa02f5ed65eaceac41f8c3c9279e ] The tx_curr_frame_payload field is u32. When we try to calculate a small negative delta based on it, we end up with a positive integer close to 2^32 instead. So the tx_bytes pointer increases by about 2^32 for every transmitted frame. Fix by calculating the delta as a signed long. Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Reported-by: Florian Bruhin <me@the-compiler.org> Fixes: 7a1e890e2168 ("usbnet: Fix tx_bytes statistic running backward in cdc_ncm") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15ipv4: Avoid crashing in ip_errorEric W. Biederman
[ Upstream commit 381c759d9916c42959515ad34a6d467e24a88e93 ] ip_error does not check if in_dev is NULL before dereferencing it. IThe following sequence of calls is possible: CPU A CPU B ip_rcv_finish ip_route_input_noref() ip_route_input_slow() inetdev_destroy() dst_input() With the result that a network device can be destroyed while processing an input packet. A crash was triggered with only unicast packets in flight, and forwarding enabled on the only network device. The error condition was created by the removal of the network device. As such it is likely the that error code was -EHOSTUNREACH, and the action taken by ip_error (if in_dev had been accessible) would have been to not increment any counters and to have tried and likely failed to send an icmp error as the network device is going away. Therefore handle this weird case by just dropping the packet if !in_dev. It will result in dropping the packet sooner, and will not result in an actual change of behavior. Fixes: 251da4130115b ("ipv4: Cache ip_error() routes even when not forwarding.") Reported-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Tested-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15net: sched: fix call_rcu() race on classifier module unloadsDaniel Borkmann
[ Upstream commit c78e1746d3ad7d548bdf3fe491898cc453911a49 ] Vijay reported that a loop as simple as ... while true; do tc qdisc add dev foo root handle 1: prio tc filter add dev foo parent 1: u32 match u32 0 0 flowid 1 tc qdisc del dev foo root rmmod cls_u32 done ... will panic the kernel. Moreover, he bisected the change apparently introducing it to 78fd1d0ab072 ("netlink: Re-add locking to netlink_lookup() and seq walker"). The removal of synchronize_net() from the netlink socket triggering the qdisc to be removed, seems to have uncovered an RCU resp. module reference count race from the tc API. Given that RCU conversion was done after e341694e3eb5 ("netlink: Convert netlink_lookup() to use RCU protected hash table") which added the synchronize_net() originally, occasion of hitting the bug was less likely (not impossible though): When qdiscs that i) support attaching classifiers and, ii) have at least one of them attached, get deleted, they invoke tcf_destroy_chain(), and thus call into ->destroy() handler from a classifier module. After RCU conversion, all classifier that have an internal prio list, unlink them and initiate freeing via call_rcu() deferral. Meanhile, tcf_destroy() releases already reference to the tp->ops->owner module before the queued RCU callback handler has been invoked. Subsequent rmmod on the classifier module is then not prevented since all module references are already dropped. By the time, the kernel invokes the RCU callback handler from the module, that function address is then invalid. One way to fix it would be to add an rcu_barrier() to unregister_tcf_proto_ops() to wait for all pending call_rcu()s to complete. synchronize_rcu() is not appropriate as under heavy RCU callback load, registered call_rcu()s could be deferred longer than a grace period. In case we don't have any pending call_rcu()s, the barrier is allowed to return immediately. Since we came here via unregister_tcf_proto_ops(), there are no users of a given classifier anymore. Further nested call_rcu()s pointing into the module space are not being done anywhere. Only cls_bpf_delete_prog() may schedule a work item, to unlock pages eventually, but that is not in the range/context of cls_bpf anymore. Fixes: 25d8c0d55f24 ("net: rcu-ify tcf_proto") Fixes: 9888faefe132 ("net: sched: cls_basic use RCU") Reported-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Thomas Graf <tgraf@suug.ch> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Tested-by: Vijay Subramanian <subramanian.vijay@gmail.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15net/ipv6/udp: Fix ipv6 multicast socket filter regressionHenning Rogge
[ Upstream commit 33b4b015e1a1ca7a8fdce40af5e71642a8ea355c ] Commit <5cf3d46192fc> ("udp: Simplify__udp*_lib_mcast_deliver") simplified the filter for incoming IPv6 multicast but removed the check of the local socket address and the UDP destination address. This patch restores the filter to prevent sockets bound to a IPv6 multicast IP to receive other UDP traffic link unicast. Signed-off-by: Henning Rogge <hrogge@gmail.com> Fixes: 5cf3d46192fc ("udp: Simplify__udp*_lib_mcast_deliver") Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15tcp/ipv6: fix flow label setting in TIME_WAIT stateFlorent Fourcot
[ Upstream commit 21858cd02dabcf290564cbf4769b101eba54d7bb ] commit 1d13a96c74fc ("ipv6: tcp: fix flowlabel value in ACK messages send from TIME_WAIT") added the flow label in the last TCP packets. Unfortunately, it was not casted properly. This patch replace the buggy shift with be32_to_cpu/cpu_to_be32. Fixes: 1d13a96c74fc ("ipv6: tcp: fix flowlabel value in ACK messages") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15rtnl/bond: don't send rtnl msg for unregistered ifaceNicolas Dichtel
[ Upstream commit ed2a80ab7b76f11af0b2c6255709c4ebf164b667 ] Before the patch, the command 'ip link add bond2 type bond mode 802.3ad' causes the kernel to send a rtnl message for the bond2 interface, with an ifindex 0. 'ip monitor' shows: 0: bond2: <BROADCAST,MULTICAST,MASTER> mtu 1500 state DOWN group default link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 9: bond2@NONE: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default link/ether ea:3e:1f:53:92:7b brd ff:ff:ff:ff:ff:ff [snip] The patch fixes the spotted bug by checking in bond driver if the interface is registered before calling the notifier chain. It also adds a check in rtmsg_ifinfo() to prevent this kind of bug in the future. Fixes: d4261e565000 ("bonding: create netlink event when bonding option is changed") CC: Jiri Pirko <jiri@resnulli.us> Reported-by: Julien Meunier <julien.meunier@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15net: phy: Allow EEE for all RGMII variantsFlorian Fainelli
[ Upstream commit 7e14069651591c81046ffaec13c3dac8cb70f5fb ] RGMII interfaces come in multiple flavors: RGMII with transmit or receive internal delay, no delays at all, or delays in both direction. This change extends the initial check for PHY_INTERFACE_MODE_RGMII to cover all of these variants since EEE should be allowed for any of these modes, since it is a property of the RGMII, hence Gigabit PHY capability more than the RGMII electrical interface and its delays. Fixes: a59a4d192166 ("phy: add the EEE support and the way to access to the MMD registers") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15x86: bpf_jit: fix compilation of large bpf programsAlexei Starovoitov
[ Upstream commit 3f7352bf21f8fd7ba3e2fcef9488756f188e12be ] x86 has variable length encoding. x86 JIT compiler is trying to pick the shortest encoding for given bpf instruction. While doing so the jump targets are changing, so JIT is doing multiple passes over the program. Typical program needs 3 passes. Some very short programs converge with 2 passes. Large programs may need 4 or 5. But specially crafted bpf programs may hit the pass limit and if the program converges on the last iteration the JIT compiler will be producing an image full of 'int 3' insns. Fix this corner case by doing final iteration over bpf program. Fixes: 0a14842f5a3c ("net: filter: Just In Time compiler for x86-64") Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Tested-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15x86: bpf_jit: fix FROM_BE16 and FROM_LE16/32 instructionsAlexei Starovoitov
[ Upstream commit 343f845b375989f1753f605902931fa939aa2223 ] FROM_BE16: 'ror %reg, 8' doesn't clear upper bits of the register, so use additional 'movzwl' insn to zero extend 16 bits into 64 FROM_LE16: should zero extend lower 16 bits into 64 bit FROM_LE32: should zero extend lower 32 bits into 64 bit Fixes: 89aa075832b0 ("net: sock: allow eBPF programs to be attached to sockets") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15net: core: Correct an over-stringent device loop detection.Vlad Yasevich
[ Upstream commit d66bf7dd27573ee5ea90484899ee952c19ccb194 ] The code in __netdev_upper_dev_link() has an over-stringent loop detection logic that actually prevents valid configurations from working correctly. In particular, the logic returns an error if an upper device is already in the list of all upper devices for a given dev. This particular check seems to be a overzealous as it disallows perfectly valid configurations. For example: # ip l a link eth0 name eth0.10 type vlan id 10 # ip l a dev br0 typ bridge # ip l s eth0.10 master br0 # ip l s eth0 master br0 <--- Will fail If you switch the last two commands (add eth0 first), then both will succeed. If after that, you remove eth0 and try to re-add it, it will fail! It appears to be enough to simply check adj_list to keeps things safe. I've tried stacking multiple devices multiple times in all different combinations, and either rx_handler registration prevented the stacking of the device linking cought the error. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15fs/binfmt_elf.c:load_elf_binary(): return -EINVAL on zero-length mappingsAndrew Morton
[ Upstream commit 073aba98f6a2235e2ac4a8402b1a131ab032876e ] commit 2b1d3ae940acd11be44c6eced5873d47c2e00ffa upstream. load_elf_binary() returns `retval', not `error'. Fixes: a87938b2e246b81b4fb ("fs/binfmt_elf.c: fix bug in loading of PIE binaries") Reported-by: James Hogan <james.hogan@imgtec.com> Cc: Michael Davidson <md@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15ARM: 8221/1: PJ4: allow building in Thumb-2 modeArd Biesheuvel
Two files that get included when building the multi_v7_defconfig target fail to build when selecting THUMB2_KERNEL for this configuration. In both cases, we can just build the file as ARM code, as none of its symbols are exported to modules, so there are no interworking concerns. In the iwmmxt.S case, add ENDPROC() declarations so the symbols are annotated as functions, resulting in the linker to emit the appropriate mode switches. Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> (cherry picked from commit 13d1b9575ac2c2da143cd2236b6cf0fc314570f8) Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-15Revert "tools/vm: fix page-flags build"Sasha Levin
This reverts commit a821ac4c66382f9d6387c8311608f13c6749fea9. That patch is not suitable for 3.18. Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-14Linux 3.18.16v3.18.16Sasha Levin
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-14arch/x86/kvm/mmu.c: work around gcc-4.4.4 bugAndrew Morton
[ Upstream commit 5ec45a192fe6e287f0fc06d5ca4f3bd446d94803 ] Fix this compile issue with gcc-4.4.4: arch/x86/kvm/mmu.c: In function 'kvm_mmu_pte_write': arch/x86/kvm/mmu.c:4256: error: unknown field 'cr0_wp' specified in initializer arch/x86/kvm/mmu.c:4257: error: unknown field 'cr4_pae' specified in initializer arch/x86/kvm/mmu.c:4257: warning: excess elements in union initializer ... gcc-4.4.4 (at least) has issues when using anonymous unions in initializers. Fixes: edc90b7dc4ceef6 ("KVM: MMU: fix SMAP virtualization") Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-14md/raid0: fix restore to sector variable in raid0_make_requestEric Work
[ Upstream commit a81157768a00e8cf8a7b43b5ea5cac931262374f ] The variable "sector" in "raid0_make_request()" was improperly updated by a call to "sector_div()" which modifies its first argument in place. Commit 47d68979cc968535cb87f3e5f2e6a3533ea48fbd restored this variable after the call for later re-use. Unfortunetly the restore was done after the referenced variable "bio" was advanced. This lead to the original value and the restored value being different. Here we move this line to the proper place. One observed side effect of this bug was discarding a file though unlinking would cause an unrelated file's contents to be discarded. Signed-off-by: NeilBrown <neilb@suse.de> Fixes: 47d68979cc96 ("md/raid0: fix bug with chunksize not a power of 2.") Cc: stable@vger.kernel.org (any that received above backport) URL: https://bugzilla.kernel.org/show_bug.cgi?id=98501 Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-13Linux 3.18.15v3.18.15Sasha Levin
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-11ARM: OMAP3: Fix booting with thumb2 kernelTony Lindgren
We get a NULL pointer dereference on omap3 for thumb2 compiled kernels: Internal error: Oops: 80000005 [#1] SMP THUMB2 ... [<c046497b>] (_raw_spin_unlock_irqrestore) from [<c0024375>] (omap3_enter_idle_bm+0xc5/0x178) [<c0024375>] (omap3_enter_idle_bm) from [<c0374e63>] (cpuidle_enter_state+0x77/0x27c) [<c0374e63>] (cpuidle_enter_state) from [<c00627f1>] (cpu_startup_entry+0x155/0x23c) [<c00627f1>] (cpu_startup_entry) from [<c06b9a47>] (start_kernel+0x32f/0x338) [<c06b9a47>] (start_kernel) from [<8000807f>] (0x8000807f) The power management related assembly on omaps needs to interact with ARM mode bootrom code, so we need to keep most of the related assembly in ARM mode. Turns out this error is because of missing ENDPROC for assembly code as suggested by Stephen Boyd <sboyd@codeaurora.org>. Let's fix the problem by adding ENDPROC in two places to sleep34xx.S. Let's also remove the now duplicate custom code for mode switching. This has been unnecessary since commit 6ebbf2ce437b ("ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+"). And let's also remove the comments about local variables, they are now just confusing after the ENDPROC. The reason why ENDPROC makes a difference is it sets .type and then the compiler knows what to do with the thumb bit as explained at: https://wiki.ubuntu.com/ARM/Thumb2PortingHowto Reported-by: Kevin Hilman <khilman@kernel.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> (cherry picked from commit d8a50941c91a68da202aaa96a3dacd471ea9c693) Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10xfrm: release dst_orig in case of error in xfrm_lookup()huaibin Wang
[ Upstream commit ac37e2515c1a89c477459a2020b6bfdedabdb91b ] dst_orig should be released on error. Function like __xfrm_route_forward() expects that behavior. Since a recent commit, xfrm_lookup() may also be called by xfrm_lookup_route(), which expects the opposite. Let's introduce a new flag (XFRM_LOOKUP_KEEP_DST_REF) to tell what should be done in case of error. Fixes: f92ee61982d("xfrm: Generate blackhole routes only from route lookup functions") Signed-off-by: huaibin Wang <huaibin.wang@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10ARC: unbork !LLSC buildVineet Gupta
[ Upstream commit daaf40e53b5dbdf75255d58a45ce8ac65ca511a8 ] Fixes: f7d11e93ee97a locking,arch,arc: Fold atomic_ops Cc: <stable@kernel.vger.org> # 3.18 Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10power/reset: at91: fix return value check in at91_reset_platform_probe()Wei Yongjun
[ Upstream commit 932df43005389300a3336421e4aedb25390ae144 ] In case of error, the function devm_ioremap() returns NULL not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: ecfe64d8c55f ("power: reset: Add AT91 reset driver") Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10vfs: read file_handle only once in handle_to_pathSasha Levin
[ Upstream commit 161f873b89136eb1e69477c847d5a5033239d9ba ] We used to read file_handle twice. Once to get the amount of extra bytes, and once to fetch the entire structure. This may be problematic since we do size verifications only after the first read, so if the number of extra bytes changes in userspace between the first and second calls, we'll have an incoherent view of file_handle. Instead, read the constant size once, and copy that over to the final structure without having to re-read it again. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10drm/radeon: partially revert "fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling"Christian König
[ Upstream commit 7c0411d2fabc2e2702c9871ffb603e251158b317 ] We have that bug for years and some users report side effects when fixing it on older hardware. So revert it for VM_CONTEXT0_PAGE_TABLE_END_ADDR, but keep it for VM 1-15. Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10drm/radeon: don't share plls if monitors differ in audio supportAlex Deucher
[ Upstream commit a10f0df0615abb194968fc08147f3cdd70fd5aa5 ] Enabling audio may enable different pll dividers. Don't share plls if the monitors differ in audio support. bug: https://bugzilla.kernel.org/show_bug.cgi?id=98751 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10drm/radeon: retry dcpd fetchAlex Deucher
[ Upstream commit 0f28d1281b6c54cc98746ae61e44e7f540758ed4 ] Retry the dpcd fetch several times. Some eDP panels fail several times before the fetch is successful. bug: https://bugs.freedesktop.org/show_bug.cgi?id=73530 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10drm/radeon: fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handlingChristian König
[ Upstream commit 607d48063512707a414e346972e2210dc71ab491 ] The mapping range is inclusive between starting and ending addresses. Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10drm/radeon: add new bonaire pci idAlex Deucher
[ Upstream commit fcf3b54282e4c5a95a1f45f67558bc105acdbc6a ] Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10iwlwifi: pcie: prevent using unmapped memory in fw monitorLiad Kaufman
[ Upstream commit 553452e5ffc0ed13214a287549627d02d9d7fbdc ] In the case of a DMA mapping error on the last iteration of the loop of the allocation of memory of the FW monitor we indeed free the pages, but don't NULL out the page variable thus allowing for the possibility of setting the FW monitor variables with invalid data to use. Fixes: c2d202017da1 ("iwlwifi: pcie: add firmware monitor capabilities") Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10ACPI / init: Fix the ordering of acpi_reserve_resources()Rafael J. Wysocki
[ Upstream commit b9a5e5e18fbf223502c0b2264c15024e393da928 ] Since acpi_reserve_resources() is defined as a device_initcall(), there's no guarantee that it will be executed in the right order with respect to the rest of the ACPI initialization code. On some systems this leads to breakage if, for example, the address range that should be reserved for the ACPI fixed registers is given to the PCI host bridge instead if the race is won by the wrong code path. Fix this by turning acpi_reserve_resources() into a void function and calling it directly from within the ACPI initialization sequence. Reported-and-tested-by: George McCollister <george.mccollister@gmail.com> Link: http://marc.info/?t=143092384600002&r=1&w=2 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10sd: Disable support for 256 byte/sector disksMark Hounschell
[ Upstream commit 74856fbf441929918c49ff262ace9835048e4e6a ] 256 bytes per sector support has been broken since 2.6.X, and no-one stepped up to fix this. So disable support for it. Signed-off-by: Mark Hounschell <dmarkh@cfl.rr.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10storvsc: Set the SRB flags correctly when no data transfer is neededK. Y. Srinivasan
[ Upstream commit dc45708ca9988656d706940df5fd102672c5de92 ] Set the SRB flags correctly when there is no data transfer. Without this change some IHV drivers will fail valid commands such as TEST_UNIT_READY. Cc: <stable@vger.kernel.org> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10rtlwifi: rtl8192cu: Fix kernel deadlockLarry Finger
[ Upstream commit 414b7e3b9ce8b0577f613e656fdbc36b34b444dd ] The USB mini-driver in rtlwifi, which is used by rtl8192cu, issues a call to usb_control_msg() with a timeout value of 0. In some instances where the interface is shutting down, this infinite wait results in a CPU deadlock. A one second timeout fixes this problem without affecting any normal operations. This bug is reported at https://bugzilla.novell.com/show_bug.cgi?id=927786. Reported-by: Bernhard Wiedemann <bwiedemann@suse.com> Tested-by: Bernhard Wiedemann <bwiedemann@suse.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Cc: Bernhard Wiedemann <bwiedemann@suse.com> Cc: Takashi Iwai<tiwai@suse.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10md/raid5: don't record new size if resize_stripes fails.NeilBrown
[ Upstream commit 6e9eac2dcee5e19f125967dd2be3e36558c42fff ] If any memory allocation in resize_stripes fails we will return -ENOMEM, but in some cases we update conf->pool_size anyway. This means that if we try again, the allocations will be assumed to be larger than they are, and badness results. So only update pool_size if there is no error. This bug was introduced in 2.6.17 and the patch is suitable for -stable. Fixes: ad01c9e3752f ("[PATCH] md: Allow stripes to be expanded in preparation for expanding an array") Cc: stable@vger.kernel.org (v2.6.17+) Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10thermal: armada: Update Armada 380 thermal sensor coefficientsNadav Haklai
[ Upstream commit efa86858e1d8970411a140fa1e0c4dd18a8f2a89 ] Improve the Armada 380 thermal sensor accuracy by using updated formula. The updated formula is: Temperature[C degrees] = 0.4761 * tsen_vsen_out - 279.1 Signed-off-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: <stable@vger.kernel.org> #v3.16 Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10firmware: dmi_scan: Fix ordering of product_uuidJean Delvare
[ Upstream commit 5c1ac56b51b9d222ab202dec1ac2f4215346129d ] In function dmi_present(), dmi_walk_early() calls dmi_table(), which calls dmi_decode(), which ultimately calls dmi_save_uuid(). This last function makes a decision based on the value of global variable dmi_ver. The problem is that this variable is set right _after_ dmi_walk_early() returns. So dmi_save_uuid() always sees dmi_ver == 0 regardless of the actual version implemented. This causes /sys/class/dmi/id/product_uuid to always use the old ordering even on systems implementing DMI/SMBIOS 2.6 or later, which should use the new ordering. This is broken since kernel v3.8 for legacy DMI implementations and since kernel v3.10 for SMBIOS 2 implementations. SMBIOS 3 implementations with the 64-bit entry point are not affected. The first breakage does not matter much as in practice legacy DMI implementations are always for versions older than 2.6, which is when the UUID ordering changed. The second breakage is more problematic as it affects the vast majority of x86 systems manufactured since 2009. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 9f9c9cbb6057 ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists") Fixes: 79bae42d51a5 ("dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()") Acked-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Artem Savkov <artem.savkov@gmail.com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: stable@vger.kernel.org [v3.10+] Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10svcrpc: fix potential GSSX_ACCEPT_SEC_CONTEXT decoding failuresScott Mayhew
[ Upstream commit 9507271d960a1911a51683888837d75c171cd91f ] In an environment where the KDC is running Active Directory, the exported composite name field returned in the context could be large enough to span a page boundary. Attaching a scratch buffer to the decoding xdr_stream helps deal with those cases. The case where we saw this was actually due to behavior that's been fixed in newer gss-proxy versions, but we're fixing it here too. Signed-off-by: Scott Mayhew <smayhew@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Simo Sorce <simo@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-06-10nfsd: fix the check for confirmed openowner in nfs4_preprocess_stateid_opChristoph Hellwig
[ Upstream commit ebe9cb3bb13e7b9b281969cd279ce70834f7500f ] If we find a non-confirmed openowner we jump to exit the function, but do not set an error value. Fix this by factoring out a helper to do the check and properly set the error from nfsd4_validate_stateid. Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-17 20:24:28 +0000