aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2012-10-31ARM: at91/i2c: change id to let i2c-gpio workBo Shen
commit 7840487cd6298f9f931103b558290d8d98d41c49 upstream. The i2c core driver will turn the platform device ID to busnum When using platfrom device ID as -1, it means dynamically assigned the busnum. When writing code, we need to make sure the busnum, and call i2c_register_board_info(int busnum, ...) to register device if using -1, we do not know the value of busnum In order to solve this issue, set the platform device ID as a fix number Here using 0 to match the busnum used in i2c_regsiter_board_info() Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-31ARM: 7559/1: smp: switch away from the idmap before updating init_mm.mm_countWill Deacon
commit 5f40b909728ad784eb43aa309d3c4e9bdf050781 upstream. When booting a secondary CPU, the primary CPU hands two sets of page tables via the secondary_data struct: (1) swapper_pg_dir: a normal, cacheable, shared (if SMP) mapping of the kernel image (i.e. the tables used by init_mm). (2) idmap_pgd: an uncached mapping of the .idmap.text ELF section. The idmap is generally used when enabling and disabling the MMU, which includes early CPU boot. In this case, the secondary CPU switches to swapper as soon as it enters C code: struct mm_struct *mm = &init_mm; unsigned int cpu = smp_processor_id(); /* * All kernel threads share the same mm context; grab a * reference and switch to it. */ atomic_inc(&mm->mm_count); current->active_mm = mm; cpumask_set_cpu(cpu, mm_cpumask(mm)); cpu_switch_mm(mm->pgd, mm); This causes a problem on ARMv7, where the identity mapping is treated as strongly-ordered leading to architecturally UNPREDICTABLE behaviour of exclusive accesses, such as those used by atomic_inc. This patch re-orders the secondary_start_kernel function so that we switch to swapper before performing any exclusive accesses. Reported-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org> Cc: David McKay <david.mckay@st.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-21ARM: 7541/1: Add ARM ERRATA 775420 workaroundSimon Horman
commit 7253b85cc62d6ff84143d96fe6cd54f73736f4d7 upstream. arm: Add ARM ERRATA 775420 workaround Workaround for the 775420 Cortex-A9 (r2p2, r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance operation aborts with MMU exception, it might cause the processor to deadlock. This workaround puts DSB before executing ISB if an abort may occur on cache maintenance. Based on work by Kouei Abe and feedback from Catalin Marinas. Signed-off-by: Kouei Abe <kouei.abe.cp@rms.renesas.com> [ horms@verge.net.au: Changed to implementation suggested by catalin.marinas@arm.com ] Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-21ARM: vfp: fix saving d16-d31 vfp registers on v6+ kernelsRussell King
commit 846a136881b8f73c1f74250bf6acfaa309cab1f2 upstream. Michael Olbrich reported that his test program fails when built with -O2 -mcpu=cortex-a8 -mfpu=neon, and a kernel which supports v6 and v7 CPUs: volatile int x = 2; volatile int64_t y = 2; int main() { volatile int a = 0; volatile int64_t b = 0; while (1) { a = (a + x) % (1 << 30); b = (b + y) % (1 << 30); assert(a == b); } } and two instances are run. When built for just v7 CPUs, this program works fine. It uses the "vadd.i64 d19, d18, d16" VFP instruction. It appears that we do not save the high-16 double VFP registers across context switches when the kernel is built for v6 CPUs. Fix that. Tested-By: Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-02ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6+Will Deacon
commit a76d7bd96d65fa5119adba97e1b58d95f2e78829 upstream. The open-coded mutex implementation for ARMv6+ cores suffers from a severe lack of barriers, so in the uncontended case we don't actually protect any accesses performed during the critical section. Furthermore, the code is largely a duplication of the ARMv6+ atomic_dec code but optimised to remove a branch instruction, as the mutex fastpath was previously inlined. Now that this is executed out-of-line, we can reuse the atomic access code for the locking (in fact, we use the xchg code as this produces shorter critical sections). This patch uses the generic xchg based implementation for mutexes on ARMv6+, which introduces barriers to the lock/unlock operations and also has the benefit of removing a fair amount of inline assembly code. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Reported-by: Shan Kang <kangshan0910@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-02ARM: 7532/1: decompressor: reset SCTLR.TRE for VMSA ARMv7 coresMatthew Leach
commit e1e5b7e4251c7538ca08c2c5545b0c2fbd8a6635 upstream. This patch zeroes the SCTLR.TRE bit prior to setting the mapping as cacheable for ARMv7 cores in the decompressor, ensuring that the memory region attributes are obtained from the C and B bits, not from the page tables. Cc: Nicolas Pitre <nico@fluxnic.net> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Matthew Leach <matthew.leach@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-02ARM: fix bad applied patch for arch/arm/Kconfig of stable 3.0.y tree.Tetsuyuki Kobayashi
No upstream commit as this is a merge error in the 3.0 tree. ARM_ERRATA_764369 and PL310_ERRATA_769419 do not appear in config menu in stable 3.0.y tree. This is because backported patch for arm/arm/Kconfig applied wrong place. This patch solves it. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14ARM: imx: select CPU_FREQ_TABLE when neededArnd Bergmann
commit f637c4c9405e21f44cf0045eaf77eddd3a79ca5a upstream. The i.MX cpufreq implementation uses the CPU_FREQ_TABLE helpers, so it needs to select that code to be built. This problem has apparently existed since the i.MX cpufreq code was first merged in v2.6.37. Building IMX without CPU_FREQ_TABLE results in: arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_exit': arch/arm/plat-mxc/cpufreq.c:173: undefined reference to `cpufreq_frequency_table_put_attr' arch/arm/plat-mxc/built-in.o: In function `mxc_set_target': arch/arm/plat-mxc/cpufreq.c:84: undefined reference to `cpufreq_frequency_table_target' arch/arm/plat-mxc/built-in.o: In function `mxc_verify_speed': arch/arm/plat-mxc/cpufreq.c:65: undefined reference to `cpufreq_frequency_table_verify' arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_init': arch/arm/plat-mxc/cpufreq.c:154: undefined reference to `cpufreq_frequency_table_cpuinfo' arch/arm/plat-mxc/cpufreq.c:162: undefined reference to `cpufreq_frequency_table_get_attr' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Yong Shen <yong.shen@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14ARM: S3C24XX: Fix s3c2410_dma_enqueue parametersHeiko Stuebner
commit b01858c7806e7e6f6121da2e51c9222fc4d21dc6 upstream. Commit d670ac019f60 (ARM: SAMSUNG: DMA Cleanup as per sparse) changed the prototype of the s3c2410_dma_* functions to use the enum dma_ch instead of an generic unsigned int. In the s3c24xx dma.c s3c2410_dma_enqueue seems to have been forgotten, the other functions there were changed correctly. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14ARM: 7489/1: errata: fix workaround for erratum #720789 on UP systemsWill Deacon
commit 730a8128cd8978467eb1cf546b11014acb57d433 upstream. Commit 5a783cbc4836 ("ARM: 7478/1: errata: extend workaround for erratum #720789") added workarounds for erratum #720789 to the range TLB invalidation functions with the observation that the erratum only affects SMP platforms. However, when running an SMP_ON_UP kernel on a uniprocessor platform we must take care to preserve the ASID as the workaround is not required. This patch ensures that we don't set the ASID to 0 when flushing the TLB on such a system, preserving the original behaviour with the workaround disabled. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14ARM: 7488/1: mm: use 5 bits for swapfile type encodingWill Deacon
commit f5f2025ef3e2cdb593707cbf87378761f17befbe upstream. Page migration encodes the pfn in the offset field of a swp_entry_t. For LPAE, we support physical addresses of up to 36 bits (due to sparsemem limitations with the size of page flags), requiring 24 bits to represent a pfn. A further 3 bits are used to encode a swp_entry into a pte, leaving 5 bits for the type field. Furthermore, the core code defines MAX_SWAPFILES_SHIFT as 5, so the additional type bit does not get used. This patch reduces the width of the type field to 5 bits, allowing us to create up to 31 swapfiles of 64GB each. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14ARM: 7487/1: mm: avoid setting nG bit for user mappings that aren't presentWill Deacon
commit 47f1204329237a0f8655f5a9f14a38ac81946ca1 upstream. Swap entries are encoding in ptes such that !pte_present(pte) and pte_file(pte). The remaining bits of the descriptor are used to identify the swapfile and offset within it to the swap entry. When writing such a pte for a user virtual address, set_pte_at unconditionally sets the nG bit, which (in the case of LPAE) will corrupt the swapfile offset and lead to a BUG: [ 140.494067] swap_free: Unused swap offset entry 000763b4 [ 140.509989] BUG: Bad page map in process rs:main Q:Reg pte:0ec76800 pmd:8f92e003 This patch fixes the problem by only setting the nG bit for user mappings that are actually present. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15ARM: mxs: Remove MMAP_MIN_ADDR setting from mxs_defconfigMarek Vasut
commit 3bed491c8d28329e34f8a31e3fe64d03f3a350f1 upstream. The CONFIG_DEFAULT_MMAP_MIN_ADDR was set to 65536 in mxs_defconfig, this caused severe breakage of userland applications since the upper limit for ARM is 32768. By default CONFIG_DEFAULT_MMAP_MIN_ADDR is set to 4096 and can also be changed via /proc/sys/vm/mmap_min_addr if needed. Quoting Russell King [1]: "4096 is also fine for ARM too. There's not much point in having defconfigs change it - that would just be pure noise in the config files." the CONFIG_DEFAULT_MMAP_MIN_ADDR can be removed from the defconfig altogether. This problem was introduced by commit cde7c41 (ARM: configs: add defconfig for mach-mxs). [1] http://marc.info/?l=linux-arm-kernel&m=134401593807820&w=2 Signed-off-by: Marek Vasut <marex@denx.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15ARM: 7479/1: mm: avoid NULL dereference when flushing gate_vma with VIVT cachesWill Deacon
commit b74253f78400f9a4b42da84bb1de7540b88ce7c4 upstream. The vivt_flush_cache_{range,page} functions check that the mm_struct of the VMA being flushed has been active on the current CPU before performing the cache maintenance. The gate_vma has a NULL mm_struct pointer and, as such, will cause a kernel fault if we try to flush it with the above operations. This happens during ELF core dumps, which include the gate_vma as it may be useful for debugging purposes. This patch adds checks to the VIVT cache flushing functions so that VMAs with a NULL mm_struct are flushed unconditionally (the vectors page may be dirty if we use it to store the current TLS pointer). Reported-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org> Tested-by: Uros Bizjak <ubizjak@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-15ARM: 7478/1: errata: extend workaround for erratum #720789Will Deacon
commit 5a783cbc48367cfc7b65afc75430953dfe60098f upstream. Commit cdf357f1 ("ARM: 6299/1: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID") replaced by-ASID TLB flushing operations with all-ASID variants to workaround A9 erratum #720789. This patch extends the workaround to include the tlb_range operations, which were overlooked by the original patch. Tested-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-09ARM: OMAP2+: OPP: Fix to ensure check of right oppdef after bad oneNishanth Menon
commit b110547e586eb5825bc1d04aa9147bff83b57672 upstream. Commit 9fa2df6b90786301b175e264f5fa9846aba81a65 (ARM: OMAP2+: OPP: allow OPP enumeration to continue if device is not present) makes the logic: for (i = 0; i < opp_def_size; i++) { <snip> if (!oh || !oh->od) { <snip> continue; } <snip> opp_def++; } In short, the moment we hit a "Bad OPP", we end up looping the list comparing against the bad opp definition pointer for the rest of the iteration count. Instead, increment opp_def in the for loop itself and allow continue to be used in code without much thought so that we check the next set of OPP definition pointers :) Cc: Steve Sakoman <steve@sakoman.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19ARM: SAMSUNG: fix race in s3c_adc_start for ADCTodd Poynor
commit 8265981bb439f3ecc5356fb877a6c2a6636ac88a upstream. Checking for adc->ts_pend already claimed should be done with the lock held. Signed-off-by: Todd Poynor <toddpoynor@google.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16ARM: fix rcu stalls on SMP platformsRussell King
commit 7deabca0acfe02b8e18f59a4c95676012f49a304 upstream. We can stall RCU processing on SMP platforms if a CPU sits in its idle loop for a long time. This happens because we don't call irq_enter() and irq_exit() around generic_smp_call_function_interrupt() and friends. Add the necessary calls, and remove the one from within ipi_timer(), so that they're all in a common place. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [add irq_enter()/irq_exit() in do_local_timer] Signed-off-by: UCHINO Satoshi <satoshi.uchino@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-22ARM i.MX imx21ads: Fix overlapping static i/o mappingsJaccon Bastiaansen
commit 350ab15bb2ffe7103bc6bf6c634f3c5b286eaf2a upstream. The statically defined I/O memory regions for the i.MX21 on chip peripherals and the on board I/O peripherals of the i.MX21ADS board overlap. This results in a kernel crash during startup. This is fixed by reducing the memory range for the on board I/O peripherals to the actually required range. Signed-off-by: Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-01ARM: 7409/1: Do not call flush_cache_user_range with mmap_sem heldDima Zavin
commit 435a7ef52db7d86e67a009b36cac1457f8972391 upstream. We can't be holding the mmap_sem while calling flush_cache_user_range because the flush can fault. If we fault on a user address, the page fault handler will try to take mmap_sem again. Since both places acquire the read lock, most of the time it succeeds. However, if another thread tries to acquire the write lock on the mmap_sem (e.g. mmap) in between the call to flush_cache_user_range and the fault, the down_read in do_page_fault will deadlock. [will: removed drop of vma parameter as already queued by rmk (7365/1)] Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Dima Zavin <dima@android.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-01ARM: 7365/1: drop unused parameter from flush_cache_user_rangeDima Zavin
commit 4542b6a0fa6b48d9ae6b41c1efeb618b7a221b2a upstream. vma isn't used and flush_cache_user_range isn't a standard macro that is used on several archs with the same prototype. In fact only unicore32 has a macro with the same name (with an identical implementation and no in-tree users). This is a part of a patch proposed by Dima Zavin (with Message-id: 1272439931-12795-1-git-send-email-dima@android.com) that didn't get accepted. Cc: Dima Zavin <dima@android.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-21ARM: prevent VM_GROWSDOWN mmaps extending below FIRST_USER_ADDRESSRussell King
commit 9b61a4d1b2064dbd0c9e61754305ac852170509f upstream. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-21ARM: orion5x: Fix GPIO enable bits for MPP9Ben Hutchings
commit 48d99f47a81a66bdd61a348c7fe8df5a7afdf5f3 upstream. Commit 554cdaefd1cf7bb54b209c4e68c7cec87ce442a9 ('ARM: orion5x: Refactor mpp code to use common orion platform mpp.') seems to have accidentally inverted the GPIO valid bits for MPP9 (only). For the mv2120 platform which uses MPP9 as a GPIO LED device, this results in the error: [ 12.711476] leds-gpio: probe of leds-gpio failed with error -22 Reported-by: Henry von Tresckow <hvontres@gmail.com> References: http://bugs.debian.org/667446 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Tested-by: Hans Henry von Tresckow <hvontres@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-21ARM: 7414/1: SMP: prevent use of the console when using idmap_pgdColin Cross
commit fde165b2a29673aabf18ceff14dea1f1cfb0daad upstream. Commit 4e8ee7de227e3ab9a72040b448ad728c5428a042 (ARM: SMP: use idmap_pgd for mapping MMU enable during secondary booting) switched secondary boot to use idmap_pgd, which is initialized during early_initcall, instead of a page table initialized during __cpu_up. This causes idmap_pgd to contain the static mappings but be missing all dynamic mappings. If a console is registered that creates a dynamic mapping, the printk in secondary_start_kernel will trigger a data abort on the missing mapping before the exception handlers have been initialized, leading to a hang. Initial boot is not affected because no consoles have been registered, and resume is usually not affected because the offending console is suspended. Onlining a cpu with hotplug triggers the problem. A workaround is to the printk in secondary_start_kernel until after the page tables have been switched back to init_mm. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-21ARM: 7410/1: Add extra clobber registers for assembly in kernel_execveTim Bird
commit e787ec1376e862fcea1bfd523feb7c5fb43ecdb9 upstream. The inline assembly in kernel_execve() uses r8 and r9. Since this code sequence does not return, it usually doesn't matter if the register clobber list is accurate. However, I saw a case where a particular version of gcc used r8 as an intermediate for the value eventually passed to r9. Because r8 is used in the inline assembly, and not mentioned in the clobber list, r9 was set to an incorrect value. This resulted in a kernel panic on execution of the first user-space program in the system. r9 is used in ret_to_user as the thread_info pointer, and if it's wrong, bad things happen. Signed-off-by: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07ARM: 7403/1: tls: remove covert channel via TPIDRURWWill Deacon
commit 6a1c53124aa161eb624ce7b1e40ade728186d34c upstream. TPIDRURW is a user read/write register forming part of the group of thread registers in more recent versions of the ARM architecture (~v6+). Currently, the kernel does not touch this register, which allows tasks to communicate covertly by reading and writing to the register without context-switching affecting its contents. This patch clears TPIDRURW when TPIDRURO is updated via the set_tls macro, which is called directly from __switch_to. Since the current behaviour makes the register useless to userspace as far as thread pointers are concerned, simply clearing the register (rather than saving and restoring it) will not cause any problems to userspace. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-22ARM: 7384/1: ThumbEE: Disable userspace TEEHBR access for !CONFIG_ARM_THUMBEEJonathan Austin
commit 078c04545ba56da21567728a909a496df5ff730d upstream. Currently when ThumbEE is not enabled (!CONFIG_ARM_THUMBEE) the ThumbEE register states are not saved/restored at context switch. The default state of the ThumbEE Ctrl register (TEECR) allows userspace accesses to the ThumbEE Base Handler register (TEEHBR). This can cause unexpected behaviour when people use ThumbEE on !CONFIG_ARM_THUMBEE kernels, as well as allowing covert communication - eg between userspace tasks running inside chroot jails. This patch sets up TEECR in order to prevent user-space access to TEEHBR when !CONFIG_ARM_THUMBEE. In this case, tasks are sent SIGILL if they try to access TEEHBR. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: 7345/1: errata: update workaround for A9 erratum #743622Will Deacon
commit efbc74ace95338484f8d732037b99c7c77098fce upstream. Erratum #743622 affects all r2 variants of the Cortex-A9 processor, so ensure that the workaround is applied regardless of the revision. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12OMAPDSS: HDMI: PHY burnout fixTomi Valkeinen
commit c49d005b6cc8491fad5b24f82805be2d6bcbd3dd upstream. A hardware bug in the OMAP4 HDMI PHY causes physical damage to the board if the HDMI PHY is kept powered on when the cable is not connected. This patch solves the problem by adding hot-plug-detection into the HDMI IP driver. This is not a real HPD support in the sense that nobody else than the IP driver gets to know about the HPD events, but is only meant to fix the HW bug. The strategy is simple: If the display device is turned off by the user, the PHY power is set to OFF. When the display device is turned on by the user, the PHY power is set either to LDOON or TXON, depending on whether the HDMI cable is connected. The reason to avoid PHY OFF when the display device is on, but the cable is disconnected, is that when the PHY is turned OFF, the HDMI IP is not "ticking" and thus the DISPC does not receive pixel clock from the HDMI IP. This would, for example, prevent any VSYNCs from happening, and would thus affect the users of omapdss. By using LDOON when the cable is disconnected we'll avoid the HW bug, but keep the HDMI working as usual from the user's point of view. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12OMAP: 4430SDP/Panda: add HDMI HPD gpioTomi Valkeinen
commit aa74274b464d4aa24703963ac89a0ee942d5d267 upstream. Both Panda and 4430SDP use GPIO 63 as HDMI hot-plug-detect. Configure this GPIO in the board files. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12OMAP: 4430SDP/Panda: setup HDMI GPIO muxesTomi Valkeinen
commit 78a1ad8f12db70b8b0a4548b90704de08ee216ce upstream. The HDMI GPIO pins LS_OE and CT_CP_HPD are not currently configured. This patch configures them as output pins. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12OMAPDSS: remove wrong HDMI HPD muxingTomi Valkeinen
commit 7bb122d155f742fe2d79849090c825be7b4a247e upstream. "hdmi_hpd" pin is muxed to INPUT and PULLUP, but the pin is not currently used, and in the future when it is used, the pin is used as a GPIO and is board specific, not an OMAP4 wide thing. So remove the muxing for now. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPDTomi Valkeinen
commit 3932a32fcf5393f8be70ac99dc718ad7ad0a415b upstream. The GPIO 60 on 4430sdp and Panda is not HPD GPIO, as currently marked in the board files, but CT_CP_HPD, which is used to enable/disable HPD functionality. This patch renames the GPIO. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpiosTomi Valkeinen
commit 575753e3bea3b67eef8e454fb87f719e3f7da599 upstream. Instead of freeing the GPIOs individually, use gpio_free_array(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12OMAP: DSS2: HDMI: use default dividersTomi Valkeinen
commit 8d88767a4377171752c22ac39bcb2b505eb751da upstream. Use default regn and regm2 dividers in the hdmi driver if the board file does not define them. Cc: Mythri P K <mythripk@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: orion: Fix Orion5x GPIO regression from MPP cleanupAndrew Lunn
commit b06540371063f0f07aafc1d1ac5e974da85c973c upstream. Patchset "ARM: orion: Refactor the MPP code common in the orion platform" broke at least Orion5x based platforms. These platforms have pins configured as GPIO when the selector is not 0x0. However the common code assumes the selector is always 0x0 for a GPIO lines. It then ignores the GPIO bits in the MPP definitions, resulting in that Orion5x machines cannot correctly configure there GPIO lines. The Fix removes the assumption that the selector is always 0x0. In order that none GPIO configurations are correctly blocked, Kirkwood and mv78xx0 MPP definitions are corrected to only set the GPIO bits for GPIO configurations. This third version, which does not contain any whitespace changes, and is rebased on v3.3-rc2. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-03-12ARM: orion: Fix USB phy for orion5x.Andrew Lunn
commit 72053353583230952c4b187e110e9da00dfc3afb upstream. The patch "ARM: orion: Consolidate USB platform setup code.", commit 4fcd3f374a928081d391cd9a570afe3b2c692fdc broke USB on TS-7800 and other orion5x boards, because the wrong type of PHY was being passed to the EHCI driver in the platform data. Orion5x needs EHCI_PHY_ORION and all the others want EHCI_PHY_NA. Allow the mach- code to tell the generic plat-orion code which USB PHY enum to place into the platform data. Version 2: Rebase to v3.3-rc2. Reported-by: Ambroz Bizjak <ambrop7@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Ambroz Bizjak <ambrop7@gmail.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: S3C24XX: DMA resume regression fixGusakov Andrey
commit e39d40c65dfd8390b50c03482ae9e289b8a8f351 upstream. s3c2410_dma_suspend suspends channels from 0 to dma_channels. s3c2410_dma_resume resumes channels in reverse order. So pointer should be decremented instead of being incremented. Signed-off-by: Gusakov Andrey <dron0gus@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: LPC32xx: Fix irq on GPI_28Roland Stigge
commit f6737055c1c432a9628a9a731f9881ad8e0a9eee upstream. The GPI_28 IRQ was not registered properly. The registration of IRQ_LPC32XX_GPI_28 was added and the (wrong) IRQ_LPC32XX_GPI_11 at LPC32XX_SIC1_IRQ(4) was replaced by IRQ_LPC32XX_GPI_28 (see manual of LPC32xx / interrupt controller). Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: LPC32xx: Fix interrupt controller initRoland Stigge
commit 35dd0a75d4a382e7f769dd0277732e7aa5235718 upstream. This patch fixes the initialization of the interrupt controller of the LPC32xx by correctly setting up SIC1 and SIC2 instead of (wrongly) using the same value as for the Main Interrupt Controller (MIC). Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: LPC32xx: irq.c: Clear latched eventRoland Stigge
commit 94ed7830cba4dce57b18a2926b5d826bfd184bd6 upstream. This patch fixes the wakeup disable function by clearing latched events. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: LPC32xx: serial.c: Fixed loop limitRoland Stigge
commit ff424aa4c89d19082e8ae5a3351006bc8a4cd91b upstream. This patch fixes a wrong loop limit on UART init. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12ARM: LPC32xx: serial.c: HW bug workaroundRoland Stigge
commit 2707208ee8a80dbbd5426f5aa1a934f766825bb5 upstream. This patch fixes a HW bug by flushing RX FIFOs of the UARTs on init. It was ported from NXP's git.lpclinux.com tree. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-29ARM: 7325/1: fix v7 boot with lockdep enabledRabin Vincent
commit 8e43a905dd574f54c5715d978318290ceafbe275 upstream. Bootup with lockdep enabled has been broken on v7 since b46c0f74657d ("ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR"). This is because v7_setup (which is called very early during boot) calls v7_flush_dcache_all, and the save_and_disable_irqs added by that patch ends up attempting to call into lockdep C code (trace_hardirqs_off()) when we are in no position to execute it (no stack, MMU off). Fix this by using a notrace variant of save_and_disable_irqs. The code already uses the notrace variant of restore_irqs. Reviewed-by: Nicolas Pitre <nico@linaro.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-29ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDRStephen Boyd
commit b46c0f74657d1fe1c1b0c1452631cc38a9e6987f upstream. armv7's flush_cache_all() flushes caches via set/way. To determine the cache attributes (line size, number of sets, etc.) the assembly first writes the CSSELR register to select a cache level and then reads the CCSIDR register. The CSSELR register is banked per-cpu and is used to determine which cache level CCSIDR reads. If the task is migrated between when the CSSELR is written and the CCSIDR is read the CCSIDR value may be for an unexpected cache level (for example L1 instead of L2) and incorrect cache flushing could occur. Disable interrupts across the write and read so that the correct cache attributes are read and used for the cache flushing routine. We disable interrupts instead of disabling preemption because the critical section is only 3 instructions and we want to call v7_dcache_flush_all from __v7_setup which doesn't have a full kernel stack with a struct thread_info. This fixes a problem we see in scm_call() when flush_cache_all() is called from preemptible context and sometimes the L2 cache is not properly flushed out. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13ARM: OMAP2+: GPMC: fix device size setupYegor Yefremov
commit 8ef5d844cc3a644ea6f7665932a4307e9fad01fa upstream. following statement can only change device size from 8-bit(0) to 16-bit(1), but not vice versa: regval |= GPMC_CONFIG1_DEVICESIZE(wval); so as this field has 1 reserved bit, that could be used in future, just clear both bits and then OR with the desired value Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13ARM: 7308/1: vfp: flush thread hwstate before copying ptrace registersWill Deacon
commit 8130b9d7b9d858aa04ce67805e8951e3cb6e9b2f upstream. If we are context switched whilst copying into a thread's vfp_hard_struct then the partial copy may be corrupted by the VFP context switching code (see "ARM: vfp: flush thread hwstate before restoring context from sigframe"). This patch updates the ptrace VFP set code so that the thread state is flushed before the copy, therefore disabling VFP and preventing corruption from occurring. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13ARM: 7307/1: vfp: fix ptrace regset modification raceDave Martin
commit 247f4993a5974e6759606c4d380748eecfd273ff upstream. In a preemptible kernel, vfp_set() can be preempted, causing the hardware VFP context to be switched while the thread vfp state is being read and modified. This leads to a race condition which can cause the thread vfp state to become corrupted if lazy VFP context save occurs due to preemption in between the time thread->vfpstate is read and the time the modified state is written back. This may occur if preemption occurs during the execution of a ptrace() call which modifies the VFP register state of a thread. Such instances should be very rare in most realistic scenarios -- none has been reported, so far as I am aware. Only uniprocessor systems should be affected, since VFP context save is not currently lazy in SMP kernels. The problem was introduced by my earlier patch migrating to use regsets to implement ptrace. This patch does a vfp_sync_hwstate() before reading thread->vfpstate, to make sure that the thread's VFP state is not live in the hardware registers while the registers are modified. Thanks to Will Deacon for spotting this. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-13ARM: 7306/1: vfp: flush thread hwstate before restoring context from sigframeWill Deacon
commit 2af276dfb1722e97b190bd2e646b079a2aa674db upstream. Following execution of a signal handler, we currently restore the VFP context from the ucontext in the signal frame. This involves copying from the user stack into the current thread's vfp_hard_struct and then flushing the new data out to the hardware registers. This is problematic when using a preemptible kernel because we could be context switched whilst updating the vfp_hard_struct. If the current thread has made use of VFP since the last context switch, the VFP notifier will copy from the hardware registers into the vfp_hard_struct, overwriting any data that had been partially copied by the signal code. Disabling preemption across copy_from_user calls is a terrible idea, so instead we move the VFP thread flush *before* we update the vfp_hard_struct. Since the flushing is performed lazily, this has the effect of disabling VFP and clearing the CPU's VFP state pointer, therefore preventing the thread from being updated with stale data on the next context switch. Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03ARM: 7296/1: proc-v7.S: remove HARVARD_CACHE preprocessor guardsWill Deacon
commit 612539e81f655f6ac73c7af1da8701c1ee618aee upstream. On v7, we use the same cache maintenance instructions for data lines as for unified lines. This was not the case for v6, where HARVARD_CACHE was defined to indicate the L1 cache topology. This patch removes the erroneous compile-time check for HARVARD_CACHE in proc-v7.S, ensuring that we perform I-side invalidation at boot. Reported-and-Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Catalin Marinas <Catalin.Marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-22 17:43:00 +0000