aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2015-09-27Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Just two fixes: wire up the new system calls added during the last merge window, and fix another user access site" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: alignment: fix alignment handling for uaccess changes ARM: wire up new syscalls
2015-09-27Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Our first real batch of fixes this release cycle. Nothing really concerning, and diffstat is a bit inflated due to some DT contents moving around on STi platforms. There's a collection of them here: - A fixup for a build breakage that hits on arm64 allmodconfig in QCOM SCM firmware drivers - MMC fixes for OMAP that had quite a bit of breakage this merge window. - Misc build/warning fixes on PXA and OMAP - A couple of minor fixes for Beagleboard X15 which is now starting to see a few more users in the wild" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) ARM: sti: dt: adapt DT to fix probe/bind issues in DRM driver ARM: dts: fix omap2+ address translation for pbias firmware: qcom: scm: Add function stubs for ARM64 ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2 ARM: omap2plus_defconfig: enable GPIO_PCA953X ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late ARM: dts: am57xx-beagle-x15: Update Phy supplies ARM: pxa: balloon3: Fix build error ARM: dts: Fixup model name for HP t410 dts ARM: dts: DRA7: fix a typo in ethernet ARM: omap2plus_defconfig: make PCF857x built-in ARM: dts: Use ti,pbias compatible string for pbias ARM: OMAP5: Cleanup options for SoC only build ARM: DRA7: Select missing options for SoC only build ARM: OMAP2+: board-generic: Remove stale of_irq macros ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as well ARM: dts: omap3-igep: Move eth IRQ pinmux to IGEPv2 common dtsi ARM: dts: am57xx-beagle-x15: Add wakeup irq for mcp79410 ARM: dts: am335x-phycore-som: Fix mpu voltage ...
2015-09-26Merge tag 'pxa-fixes-v4.3' of https://github.com/rjarzmik/linux into fixesOlof Johansson
ARM: pxa: fixes for v4.3 These fixes are mainly regression fixes triggered by irq changes, common clock framework introduction and sound side-effect of other platforms. * tag 'pxa-fixes-v4.3' of https://github.com/rjarzmik/linux: ARM: pxa: balloon3: Fix build error ARM: pxa: ssp: Fix build error by removing originally incorrect DT binding ARM: pxa: fix DFI bus lockups on startup Signed-off-by: Olof Johansson <olof@lixom.net>
2015-09-26Merge tag 'omap-for-v4.3/fixes-rc2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.3-rc cycle: - Two more patches to fix most of the MMC regressions with the PBIAS regulator changes. At least two MMC driver related issues still seems to remain for omap3 legacy booting and omap4 duovero. Note that the dts changes depend on a recent regulator fix, and are based on the regulator commit now in mainline kernel - Enable autoidle for am43xx clocks to prevent clocks from staying always on - Fix i2c5 pinctrl offsets for omap5-uevm - Enable PCA953X as that's needed for HDMI to work on omap5 - Update phy supplies for beagle x15 beta board - Use palmas-usb for on beagle x15 to start using the related driver that recently got merged * tag 'omap-for-v4.3/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: fix omap2+ address translation for pbias ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2 ARM: omap2plus_defconfig: enable GPIO_PCA953X ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late ARM: dts: am57xx-beagle-x15: Update Phy supplies regulator: pbias: program pbias register offset in pbias driver ARM: omap2plus_defconfig: Enable MUSB DMA support ARM: DRA752: Add ID detect for ES2.0 ARM: OMAP3: vc: fix 'or' always true warning ARM: OMAP2+: Fix booting if no timer parent clock is available ARM: OMAP2+: omap-device: fix race deferred probe of omap_hsmmc vs omap_device_late_init Signed-off-by: Olof Johansson <olof@lixom.net>
2015-09-25Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "AMD fixes for bugs introduced in the 4.2 merge window, and a few PPC bug fixes too" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: disable halt_poll_ns as default for s390x KVM: x86: fix off-by-one in reserved bits check KVM: x86: use correct page table format to check nested page table reserved bits KVM: svm: do not call kvm_set_cr0 from init_vmcb KVM: x86: trap AMD MSRs for the TSeg base and mask KVM: PPC: Book3S: Take the kvm->srcu lock in kvmppc_h_logical_ci_load/store() KVM: PPC: Book3S HV: Pass the correct trap argument to kvmhv_commence_exit KVM: PPC: Book3S HV: Fix handling of interrupted VCPUs kvm: svm: reset mmu on VCPU reset
2015-09-25KVM: disable halt_poll_ns as default for s390xDavid Hildenbrand
We observed some performance degradation on s390x with dynamic halt polling. Until we can provide a proper fix, let's enable halt_poll_ns as default only for supported architectures. Architectures are now free to set their own halt_poll_ns default value. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-24Merge tag 'v4.3-rockchip32-dtsfixes1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Add the ddc-i2c-bus reference to the veyron hdmi nodes, so that they can read the edid of connected displays. * tag 'v4.3-rockchip32-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: Add ddc i2c reference to veyron Signed-off-by: Olof Johansson <olof@lixom.net>
2015-09-24ARM: sti: dt: adapt DT to fix probe/bind issues in DRM driverBenjamin Gaignard
STI drm drivers probe and bind using component framework was incorrect. In addition to drivers fix DT update is needed to make all sub-components become childs of sti-display-subsystem. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-09-24ARM: dts: fix omap2+ address translation for pbiasKishon Vijay Abraham I
"ARM: dts: <omap2/omap4/omap5/dra7>: add minimal l4 bus layout with control module support" moved pbias_regulator dt node from being a child node of ocp to be the child node of 'syscon'. Since 'syscon' doesn't have the 'ranges' property, address translation fails while trying to convert the address to resource. Fix it here by populating 'ranges' property in syscon dt node. Fixes: 72b10ac00eb1 ("ARM: dts: omap24xx: add minimal l4 bus layout with control module support") Fixes: 7415b0b4c645 ("ARM: dts: omap4: add minimal l4 bus layout with control module support") Fixes: ed8509edddeb ("ARM: dts: omap5: add minimal l4 bus layout with control module support") Fixes: d919501feffa ("ARM: dts: dra7: add minimal l4 bus layout with control module support") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> [tony@atomide.com: fixed omap3 pbias to work] Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-24ARM: alignment: fix alignment handling for uaccess changesRussell King
Jonathan Liu reports that the recent addition of CPU_SW_DOMAIN_PAN causes wpa_supplicant to die due to the following kernel oops: Unhandled fault: page domain fault (0x81b) at 0x001017a2 pgd = ee1b8000 [001017a2] *pgd=6ebee831, *pte=6c35475f, *ppte=6c354c7f Internal error: : 81b [#1] SMP ARM Modules linked in: rt2800usb rt2x00usb rt2800librt2x00lib crc_ccitt mac80211 CPU: 1 PID: 202 Comm: wpa_supplicant Not tainted 4.3.0-rc2 #1 Hardware name: Allwinner sun7i (A20) Family task: ec872f80 ti: ee364000 task.ti: ee364000 PC is at do_alignment_ldmstm+0x1d4/0x238 LR is at 0x0 pc : [<c001d1d8>] lr : [<00000000>] psr: 600c0113 sp : ee365e18 ip : 00000000 fp : 00000002 r10: 001017a2 r9 : 00000002 r8 : 001017aa r7 : ee365fb0 r6 : e8820018 r5 : 001017a2 r4 : 00000003 r3 : d49e30e0 r2 : 00000000 r1 : ee365fbc r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none[ 34.393106] Control: 10c5387d Table: 6e1b806a DAC: 00000051 Process wpa_supplicant (pid: 202, stack limit = 0xee364210) Stack: (0xee365e18 to 0xee366000) ... [<c001d1d8>] (do_alignment_ldmstm) from [<c001d510>] (do_alignment+0x1f0/0x904) [<c001d510>] (do_alignment) from [<c00092a0>] (do_DataAbort+0x38/0xb4) [<c00092a0>] (do_DataAbort) from [<c0013d7c>] (__dabt_usr+0x3c/0x40) Exception stack(0xee365fb0 to 0xee365ff8) 5fa0: 00000000 56c728c0 001017a2 d49e30e0 5fc0: 775448d2 597d4e74 00200800 7a9e1625 00802001 00000021 b6deec84 00000100 5fe0: 08020200 be9f4f20 0c0b0d0a b6d9b3e0 600c0010 ffffffff Code: e1a0a005 e1a0000c 1affffe8 e5913000 (e4ea3001) ---[ end trace 0acd3882fcfdf9dd ]--- This is caused by the alignment handler not being fixed up for the uaccess changes, and userspace issuing an unaligned LDM instruction. So, fix the problem by adding the necessary fixups. Reported-by: Jonathan Liu <net147@gmail.com> Tested-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-22ARM: wire up new syscallsRussell King
Wire up the new userfaultfd and membarrier syscalls for ARM. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-19Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Three fixes and a resulting cleanup for -rc2: - Andre Przywara reported that he was seeing a warning with the new cast inside DMA_ERROR_CODE's definition, and fixed the incorrect use. - Doug Anderson noticed that kgdb causes a "scheduling while atomic" bug. - OMAP5 folk noticed that their Thumb-2 compiled X servers crashed when enabling support to cover ARMv6 CPUs due to a kernel bug leaking some conditional context into the signal handler" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8425/1: kgdb: Don't try to stop the machine when setting breakpoints ARM: 8437/1: dma-mapping: fix build warning with new DMA_ERROR_CODE definition ARM: get rid of needless #if in signal handling code ARM: fix Thumb2 signal handling when ARMv6 is enabled
2015-09-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "Mostly stable material, a lot of ARM fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits) sched: access local runqueue directly in single_task_running arm/arm64: KVM: Remove 'config KVM_ARM_MAX_VCPUS' arm64: KVM: Remove all traces of the ThumbEE registers arm: KVM: Disable virtual timer even if the guest is not using it arm64: KVM: Disable virtual timer even if the guest is not using it arm/arm64: KVM: vgic: Check for !irqchip_in_kernel() when mapping resources KVM: s390: Replace incorrect atomic_or with atomic_andnot arm: KVM: Fix incorrect device to IPA mapping arm64: KVM: Fix user access for debug registers KVM: vmx: fix VPID is 0000H in non-root operation KVM: add halt_attempted_poll to VCPU stats kvm: fix zero length mmio searching kvm: fix double free for fast mmio eventfd kvm: factor out core eventfd assign/deassign logic kvm: don't try to register to KVM_FAST_MMIO_BUS for non mmio eventfd KVM: make the declaration of functions within 80 characters KVM: arm64: add workaround for Cortex-A57 erratum #852523 KVM: fix polling for guest halt continued even if disable it arm/arm64: KVM: Fix PSCI affinity info return value for non valid cores arm64: KVM: set {v,}TCR_EL2 RES1 bits ...
2015-09-18Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This is a rather large update post rc1 due to the final steps of cleanups and API changes which had to wait for the preparatory patches to hit your tree. - Regression fixes for ARM GIC irqchips - Regression fixes and lockdep anotations for renesas irq chips - The leftovers of the cleanup and preparatory patches which have been ignored by maintainers - Final conversions of the newly merged users of obsolete APIs - Final removal of obsolete APIs - Final removal of ARM artifacts which had been introduced during the conversion of ARM to the generic interrupt code. - Final split of the irq_data into chip specific and common data to reflect the needs of hierarchical irq domains. - Treewide removal of the first argument of interrupt flow handlers, i.e. the irq number, which is not used by the majority of handlers and simple to retrieve from the other argument the irq descriptor. - A few comment updates and build warning fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) arm64: Remove ununsed set_irq_flags ARM: Remove ununsed set_irq_flags sh: Kill off set_irq_flags usage irqchip: Kill off set_irq_flags usage gpu/drm: Kill off set_irq_flags usage genirq: Remove irq argument from irq flow handlers genirq: Move field 'msi_desc' from irq_data into irq_common_data genirq: Move field 'affinity' from irq_data into irq_common_data genirq: Move field 'handler_data' from irq_data into irq_common_data genirq: Move field 'node' from irq_data into irq_common_data irqchip/gic-v3: Use IRQD_FORWARDED_TO_VCPU flag irqchip/gic: Use IRQD_FORWARDED_TO_VCPU flag genirq: Provide IRQD_FORWARDED_TO_VCPU status flag genirq: Simplify irq_data_to_desc() genirq: Remove __irq_set_handler_locked() pinctrl/pistachio: Use irq_set_handler_locked gpio: vf610: Use irq_set_handler_locked powerpc/mpc8xx: Use irq_set_handler_locked() powerpc/ipic: Use irq_set_handler_locked() powerpc/cpm2: Use irq_set_handler_locked() ...
2015-09-17Merge tag 'kvm-arm-for-4.3-rc2-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master Second set of KVM/ARM changes for 4.3-rc2 - Workaround for a Cortex-A57 erratum - Bug fix for the debugging infrastructure - Fix for 32bit guests with more than 4GB of address space on a 32bit host - A number of fixes for the (unusual) case when we don't use the in-kernel GIC emulation - Removal of ThumbEE handling on arm64, since these have been dropped from the architecture before anyone actually ever built a CPU - Remove the KVM_ARM_MAX_VCPUS limitation which has become fairly pointless
2015-09-17arm/arm64: KVM: Remove 'config KVM_ARM_MAX_VCPUS'Ming Lei
This patch removes config option of KVM_ARM_MAX_VCPUS, and like other ARCHs, just choose the maximum allowed value from hardware, and follows the reasons: 1) from distribution view, the option has to be defined as the max allowed value because it need to meet all kinds of virtulization applications and need to support most of SoCs; 2) using a bigger value doesn't introduce extra memory consumption, and the help text in Kconfig isn't accurate because kvm_vpu structure isn't allocated until request of creating VCPU is sent from QEMU; 3) the main effect is that the field of vcpus[] in 'struct kvm' becomes a bit bigger(sizeof(void *) per vcpu) and need more cache lines to hold the structure, but 'struct kvm' is one generic struct, and it has worked well on other ARCHs already in this way. Also, the world switch frequecy is often low, for example, it is ~2000 when running kernel building load in VM from APM xgene KVM host, so the effect is very small, and the difference can't be observed in my test at all. Cc: Dann Frazier <dann.frazier@canonical.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-17arm: KVM: Disable virtual timer even if the guest is not using itMarc Zyngier
When running a guest with the architected timer disabled (with QEMU and the kernel_irqchip=off option, for example), it is important to make sure the timer gets turned off. Otherwise, the guest may try to enable it anyway, leading to a screaming HW interrupt. The fix is to unconditionally turn off the virtual timer on guest exit. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-16ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2Roger Quadros
The VBUS line of USB2 is connected to VBUS detect logic on the PMIC. Use the palmas-usb driver to report VBUS events to the USB driver. As the palmas-usb driver supports GPIO based ID reporting provide the GPIO for ID pin as well. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-16ARM: omap2plus_defconfig: enable GPIO_PCA953XGrazvydas Ignotas
This enables tca6424a GPIO expander driver that in turn enables TPD12S015 HDMI ESD protection and level shifter on OMAP5 uevm. In other words, it makes HDMI work on OMAP5 uevm. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-16ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsetsGrazvydas Ignotas
The i2c5 pinctrl offsets are wrong. If the bootloader doesn't set the pins up, communication with tca6424a doesn't work (controller timeouts) and it is not possible to enable HDMI. Fixes: 9be495c42609 ("ARM: dts: omap5-evm: Add I2c pinctrl data") Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-16ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_lateDave Gerlach
Add omap2_clk_enable_autoidle_all to am43xx_init_late otherwise the call to omap2_clk_disable_autoidle_all in am43xx_init_early may cause some clocks to always stay active and prevent low power mode transitions. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-16ARM: dts: am57xx-beagle-x15: Update Phy suppliesNishanth Menon
Originally, all the SoC PHY rails were supplied by LDO3. However, as a result of characterization, it was determined that this posed a risk in extreme load conditions. Hence the PHY rails are split between two different LDOs. Update the related node as a result LDO3/VDDA_1V8_PHYA supplies vdda_usb1, vdda_usb2, vdda_sata, vdda_usb3 LDO4/VDDA_1V8_PHYB supplies vdda_pcie1, vdda_pcie0, vdda_hdmi, vdda_pcie NOTE: We break compatibility with pre-production boards with this change since, the PMIC LDO4 is disabled at OTP level. The new configuration is the plan of record and all pre-production boards are supposed to be replaced with the latest boards matching the mentioned configuration. Some very few 10 something boards have been created and stopped production till the latest modifications were done (PMIC USB interrupt, LDO4 etc) - and all of those boards are now getting scrapped.. If there are any (as per tracking information, there should not be any), TI should be contacted to have them replaced. Signed-off-by: Nishanth Menon <nm@ti.com> [tony@atomide.com: updated commit about these being TI internal protos] Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-16ARM: 8425/1: kgdb: Don't try to stop the machine when setting breakpointsDoug Anderson
In (23a4e40 arm: kgdb: Handle read-only text / modules) we moved to using patch_text() to set breakpoints so that we could handle the case when we had CONFIG_DEBUG_RODATA. That patch used patch_text(). Unfortunately, patch_text() assumes that we're not in atomic context when it runs since it needs to grab a mutex and also wait for other CPUs to stop (which it does with a completion). This would result in a stack crawl if you had CONFIG_DEBUG_ATOMIC_SLEEP and tried to set a breakpoint in kgdb. The crawl looked something like: BUG: scheduling while atomic: swapper/0/0/0x00010007 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc7-00133-geb63b34 #1073 Hardware name: Rockchip (Device Tree) (unwind_backtrace) from [<c00133d4>] (show_stack+0x20/0x24) (show_stack) from [<c05400e8>] (dump_stack+0x84/0xb8) (dump_stack) from [<c004913c>] (__schedule_bug+0x54/0x6c) (__schedule_bug) from [<c054065c>] (__schedule+0x80/0x668) (__schedule) from [<c0540cfc>] (schedule+0xb8/0xd4) (schedule) from [<c0543a3c>] (schedule_timeout+0x2c/0x234) (schedule_timeout) from [<c05417c0>] (wait_for_common+0xf4/0x188) (wait_for_common) from [<c0541874>] (wait_for_completion+0x20/0x24) (wait_for_completion) from [<c00a0104>] (__stop_cpus+0x58/0x70) (__stop_cpus) from [<c00a0580>] (stop_cpus+0x3c/0x54) (stop_cpus) from [<c00a06c4>] (__stop_machine+0xcc/0xe8) (__stop_machine) from [<c00a0714>] (stop_machine+0x34/0x44) (stop_machine) from [<c00173e8>] (patch_text+0x28/0x34) (patch_text) from [<c001733c>] (kgdb_arch_set_breakpoint+0x40/0x4c) (kgdb_arch_set_breakpoint) from [<c00a0d68>] (kgdb_validate_break_address+0x2c/0x60) (kgdb_validate_break_address) from [<c00a0e90>] (dbg_set_sw_break+0x1c/0xdc) (dbg_set_sw_break) from [<c00a2e88>] (gdb_serial_stub+0x9c4/0xba4) (gdb_serial_stub) from [<c00a11cc>] (kgdb_cpu_enter+0x1f8/0x60c) (kgdb_cpu_enter) from [<c00a18cc>] (kgdb_handle_exception+0x19c/0x1d0) (kgdb_handle_exception) from [<c0016f7c>] (kgdb_compiled_brk_fn+0x30/0x3c) (kgdb_compiled_brk_fn) from [<c00091a4>] (do_undefinstr+0x1a4/0x20c) (do_undefinstr) from [<c001400c>] (__und_svc_finish+0x0/0x34) It turns out that when we're in kgdb all the CPUs are stopped anyway so there's no reason we should be calling patch_text(). We can instead directly call __patch_text() which assumes that CPUs have already been stopped. Fixes: 23a4e4050ba9 ("arm: kgdb: Handle read-only text / modules") Reported-by: Aapo Vienamo <avienamo@nvidia.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-16ARM: 8437/1: dma-mapping: fix build warning with new DMA_ERROR_CODE definitionAndre Przywara
Commit 96231b2686b5: ("ARM: 8419/1: dma-mapping: harmonize definition of DMA_ERROR_CODE") changed the definition of DMA_ERROR_CODE to use dma_addr_t, which makes the compiler barf on assigning this to an "int" variable on ARM with LPAE enabled: ************* In file included from /src/linux/include/linux/dma-mapping.h:86:0, from /src/linux/arch/arm/mm/dma-mapping.c:21: /src/linux/arch/arm/mm/dma-mapping.c: In function '__iommu_create_mapping': /src/linux/arch/arm/include/asm/dma-mapping.h:16:24: warning: overflow in implicit constant conversion [-Woverflow] #define DMA_ERROR_CODE (~(dma_addr_t)0x0) ^ /src/linux/arch/arm/mm/dma-mapping.c:1252:15: note: in expansion of macro DMA_ERROR_CODE' int i, ret = DMA_ERROR_CODE; ^ ************* Remove the actually unneeded initialization of "ret" in __iommu_create_mapping() and move the variable declaration inside the for-loop to make the scope of this variable more clear. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-16ARM: get rid of needless #if in signal handling codeRussell King
Remove the #if statement which caused trouble for kernels that support both ARMv6 and ARMv7. Older architectures do not implement these bits, so it should be safe to always clear them. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-16ARM: pxa: balloon3: Fix build errorAxel Lin
irq_data_get_chip() function does not exist, call irq_desc_get_chip() instead. Fixes: 9ec97561aa6d ("ARM/pxa: Prepare balloon3_irq_handler for irq argument removal") Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-09-16arm/arm64: KVM: vgic: Check for !irqchip_in_kernel() when mapping resourcesPavel Fedin
Until b26e5fdac43c ("arm/arm64: KVM: introduce per-VM ops"), kvm_vgic_map_resources() used to include a check on irqchip_in_kernel(), and vgic_v2_map_resources() still has it. But now vm_ops are not initialized until we call kvm_vgic_create(). Therefore kvm_vgic_map_resources() can being called without a VGIC, and we die because vm_ops.map_resources is NULL. Fixing this restores QEMU's kernel-irqchip=off option to a working state, allowing to use GIC emulation in userspace. Fixes: b26e5fdac43c ("arm/arm64: KVM: introduce per-VM ops") Cc: stable@vger.kernel.org Signed-off-by: Pavel Fedin <p.fedin@samsung.com> [maz: reworked commit message] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-16ARM: Remove ununsed set_irq_flagsRob Herring
Now that all users of set_irq_flags and custom flags are converted to genirq functions, the ARM specific set_irq_flags can be removed. Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Kevin Hilman <khilman@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-16arm: KVM: Fix incorrect device to IPA mappingMarek Majtyka
A critical bug has been found in device memory stage1 translation for VMs with more then 4GB of address space. Once vm_pgoff size is smaller then pa (which is true for LPAE case, u32 and u64 respectively) some more significant bits of pa may be lost as a shift operation is performed on u32 and later cast onto u64. Example: vm_pgoff(u32)=0x00210030, PAGE_SHIFT=12 expected pa(u64): 0x0000002010030000 produced pa(u64): 0x0000000010030000 The fix is to change the order of operations (casting first onto phys_addr_t and then shifting). Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> [maz: fixed changelog and patch formatting] Cc: stable@vger.kernel.org Signed-off-by: Marek Majtyka <marek.majtyka@tieto.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-16KVM: add halt_attempted_poll to VCPU statsPaolo Bonzini
This new statistic can help diagnosing VCPUs that, for any reason, trigger bad behavior of halt_poll_ns autotuning. For example, say halt_poll_ns = 480000, and wakeups are spaced exactly like 479us, 481us, 479us, 481us. Then KVM always fails polling and wastes 10+20+40+80+160+320+480 = 1110 microseconds out of every 479+481+479+481+479+481+479 = 3359 microseconds. The VCPU then is consuming about 30% more CPU than it would use without polling. This would show as an abnormally high number of attempted polling compared to the successful polls. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com< Reviewed-by: David Matlack <dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16ARM: fix Thumb2 signal handling when ARMv6 is enabledRussell King
When a kernel is built covering ARMv6 to ARMv7, we omit to clear the IT state when entering a signal handler. This can cause the first few instructions to be conditionally executed depending on the parent context. In any case, the original test for >= ARMv7 is broken - ARMv6 can have Thumb-2 support as well, and an ARMv6T2 specific build would omit this code too. Relax the test back to ARMv6 or greater. This results in us always clearing the IT state bits in the PSR, even on CPUs where these bits are reserved. However, they're reserved for the IT state, so this should cause no harm. Cc: <stable@vger.kernel.org> Fixes: d71e1352e240 ("Clear the IT state when invoking a Thumb-2 signal handler") Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-14Merge branch 'fixes-rc1' into omap-for-v4.3/fixesTony Lindgren
2015-09-14ARM: dts: Fixup model name for HP t410 dtsNicolas Chauvet
This fix the model name for the device. Whole string taken from the HP support center web page Signed-off-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-14ARM: dts: DRA7: fix a typo in ethernetVishal Mahaveer
Register address in name of the node is wrong Signed-off-by: Vishal Mahaveer <vishalm@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-14ARM: omap2plus_defconfig: make PCF857x built-inKishon Vijay Abraham I
One of the lines from PCF857x is connected to the vdd line of MMC1 in DRA74x and DRA72x EVMs and is modelled as a regulator. If PCF857x is not made as built-in, the regulator_get in omap_hsmmc fails making it difficult to use MMC1 as rootfs. Make PCF857x built-in. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-14ARM: dts: Use ti,pbias compatible string for pbiasKishon Vijay Abraham I
Use platform specific compatible strings instead of the common "ti,pbias-omap" compatible string. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-14Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "A number of fixes for the merge window, fixing a number of cases missed when testing the uaccess code, particularly cases which only show up with certain compiler versions" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8431/1: fix alignement of __bug_table section entries arm/xen: Enable user access to the kernel before issuing a privcmd call ARM: domains: add memory dependencies to get_domain/set_domain ARM: domains: thread_info.h no longer needs asm/domains.h ARM: uaccess: fix undefined instruction on ARMv7M/noMMU ARM: uaccess: remove unneeded uaccess_save_and_disable macro ARM: swpan: fix nwfpe for uaccess changes ARM: 8429/1: disable GCC SRA optimization
2015-09-14ARM: OMAP5: Cleanup options for SoC only buildNishanth Menon
OMAP5 SoC has Cortex-A15 which does not use TWD timer. It uses ARCH_TIMER instead, clean up unwanted configuration and enable OMAP_INTERCONNECT and OPP which is necessary for expected functionality on the SoC. Reported-by: Carlos Hernandez <ceh@ti.com> Reported-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-14ARM: DRA7: Select missing options for SoC only buildNishanth Menon
DRA7 does use OPP, uses OMAP interconnect and also does require SCU. These are missing in the SoC only build of DRA7 breaking various PM features in DRA7 only build. Reported-by: Carlos Hernandez <ceh@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-14ARM: OMAP2+: board-generic: Remove stale of_irq macrosNishanth Menon
When commit c4082d499fa2 ("ARM: omap2+: board-generic: clean up the irq data from board file") cleaned up the direct usage of gic_of_init and omap_intc_of_init, it failed to clean up the macros properly. Since these macros are no longer used, lets just remove them. Fixes: c4082d499fa2 ("ARM: omap2+: board-generic: clean up the irq data from board file") Reported-by: Carlos Hernandez <ceh@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-14ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as wellNishanth Menon
OMAP5 and DRA7 reuse the same pm44xx_erratum variable so, enable the same, else PM features such as Suspend to ram is broken in a SoC only build configuration. Reported-by: Carlos Hernandez <ceh@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-14ARM: dts: omap3-igep: Move eth IRQ pinmux to IGEPv2 common dtsiJavier Martinez Canillas
Only the IGEPv2 boards have a LAN9221i chip connected to the GPMC so the pinmux configuration for the GPIO connected to the IRQ line of the LAN chip should not be defined in the IGEP common dtsi but in the one common to the IGEPv2 boards. While there, use the OMAP3_CORE1_IOPAD() macro for the padconf reg. Suggested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-14ARM: dts: am57xx-beagle-x15: Add wakeup irq for mcp79410Nishanth Menon
With the support in the generic PM framework for wakeirq and capability added to the rtc-ds1307 driver to support this, we can now define the optional wakeup irq to allow the RTC to wakeup the system from low power modes as part of suspend. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-14ARM: dts: am335x-phycore-som: Fix mpu voltageTeresa Remmet
Fix the mpu voltage as it is set too low for the silicon revision 2.1. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-14ARM: dts: am57xx-beagle-x15: Fix regulator populated in MMC1 dt nodeKishon Vijay Abraham I
For beagle x15, both the vdd and io lines are connected to the same regulator (ldo1_reg). However vmmc_aux is populated to vdd_3v3. Remove it. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Nishanth Menon <nm@ti.com> [tony@atomide.com: updated to apply] Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-14ARM: dts: Fix dm814x control base to properly initialize Ethernet PHYTony Lindgren
Looks like I made a typo on the control base, all the 81xx SoCs have it at 0x48140000 base. We've just gotten away with the typo as the Ethernet phy was configured by the bootloader on my test system and we're not yet using the pinctrl. In addition to fixing the contol base, we need to also use the right Ethernet phy flags to initialize it. And we are still missing the PLL driver for dm814x and only relying on the divider and mux clocks. Fixes: f3d953ea3721 ("ARM: dts: Add minimal dm814x support") Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-14ARM: dts: omap3-beagle: make i2c3, ddc and tfp410 gpio work againCarl Frederik Werner
Let's fix pinmux address of gpio 170 used by tfp410 powerdown-gpio. According to the OMAP35x Technical Reference Manual CONTROL_PADCONF_I2C3_SDA[15:0] 0x480021C4 mode0: i2c3_sda CONTROL_PADCONF_I2C3_SDA[31:16] 0x480021C4 mode4: gpio_170 the pinmux address of gpio 170 must be 0x480021C6. The former wrong address broke i2c3 (used by hdmi ddc), resulting in kernel message: omap_i2c 48060000.i2c: controller timed out Fixes: 8cecf52befd7 ("ARM: omap3-beagle.dts: add display information") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by: Carl Frederik Werner <frederik@cfbw.eu> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-14Merge tag 'kvm-arm-for-4.3-rc2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/ARM changes for 4.3-rc2 - Fix timer interrupt injection after the rework that went in during the merge window - Reset the timer to zero on reboot - Make sure the TCR_EL2 RES1 bits are really set to 1 - Fix a PSCI affinity bug for non-existing vcpus
2015-09-13ARM: dts: Add ddc i2c reference to veyronDouglas Anderson
The ddc-i2c-bus property was missing from the veyron dtsi file since downstream the ddc-i2c-bus was still being specified in rk3288.dtsi and nobody noticed when the veyron dtsi was sent upstream. Add it. Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>