aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2013-07-31parisc: Remove arch/parisc/kernel/sys32.h headerJohn David Anglin
The KERNEL_SYSCALL define is not used anymore so the header can be removed. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2013-07-31parisc: add defconfig for c8000 machineHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2013-07-31parisc: Fix cache routines to ignore vma's with an invalid pfnJohn David Anglin
The parisc architecture does not have a pte special bit. As a result, special mappings are handled with the VM_PFNMAP and VM_MIXEDMAP flags. VM_MIXEDMAP mappings may or may not have a "struct page" backing. When pfn_valid() is false, there is no "struct page" backing. Otherwise, they are treated as normal pages. The FireGL driver uses the VM_MIXEDMAP without a backing "struct page". This treatment caused a panic due to a TLB data miss in update_mmu_cache. This appeared to be in the code generated for page_address(). We were in fact using a very circular bit of code to determine the physical address of the PFN in various cache routines. This wasn't valid when there was no "struct page" backing. The needed address can in fact be determined simply from the PFN itself without using the "struct page". The attached patch updates update_mmu_cache(), flush_cache_mm(), flush_cache_range() and flush_cache_page() to check pfn_valid() and to directly compute the PFN physical and virtual addresses. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> # 3.10 Signed-off-by: Helge Deller <deller@gmx.de>
2013-07-31arch/x86/platform/ce4100/ce4100.c: include reboot.hAndrew Morton
Fix the build: arch/x86/platform/ce4100/ce4100.c: In function 'x86_ce4100_early_setup': arch/x86/platform/ce4100/ce4100.c:165:2: error: 'reboot_type' undeclared (first use in this function) Reported-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31ARM: allow kuser helpers to be removed from the vector pageRussell King
Provide a kernel configuration option to allow the kernel user helpers to be removed from the vector page, thereby preventing their use with ROP (return orientated programming) attacks. This option is only visible for CPU architectures which natively support all the operations which kernel user helpers would normally provide, and must be enabled with caution. Cc: <stable@vger.kernel.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-31ARM: update FIQ support for relocation of vectorsRussell King
FIQ should no longer copy the FIQ code into the user visible vector page. Instead, it should use the hidden page. This change makes that happen. Cc: <stable@vger.kernel.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-31ARM: use linker magic for vectors and vector stubsRussell King
Use linker magic to create the vectors and vector stubs: we can tell the linker to place them at an appropriate VMA, but keep the LMA within the kernel. This gets rid of some unnecessary symbol manipulation, and have the linker calculate the relocations appropriately. Cc: <stable@vger.kernel.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-31ARM: move vector stubsRussell King
Move the machine vector stubs into the page above the vector page, which we can prevent from being visible to userspace. Also move the reset stub, and place the swi vector at a location that the 'ldr' can get to it. This hides pointers into the kernel which could give valuable information to attackers, and reduces the number of exploitable instructions at a fixed address. Cc: <stable@vger.kernel.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-31ARM: poison memory between kuser helpersRussell King
Poison the memory between each kuser helper. This ensures that any branch between the kuser helpers will be appropriately trapped. Cc: <stable@vger.kernel.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-31ARM: poison the vectors pageRussell King
Fill the empty regions of the vectors page with an exception generating instruction. This ensures that any inappropriate branch to the vector page is appropriately trapped, rather than just encountering some code to execute. (The vectors page was filled with zero before, which corresponds with the "andeq r0, r0, r0" instruction - a no-op.) Cc: <stable@vger.kernel.org> Acked-by Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-31Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: - BMIPS SMP fixes - a build fix necessary for older compilers - two more bugs found my Chandras' testing - and one more build fix * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: BMIPS: fix slave CPU booting when physical CPU is not 0 MIPS: BMIPS: do not change interrupt routing depending on boot CPU MIPS: powertv: Fix arguments for free_reserved_area() MIPS: Set default CPU type for BCM47XX platforms MIPS: uapi/asm/siginfo.h: Fix GCC 4.1.2 compilation MIPS: Fix multiple definitions of UNCAC_BASE.
2013-07-31Merge tag 'xen-arm-3.11-rc2-warn-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen Pull Xen ARM fix from Stefano Stabellini. Update xen_restart to new calling convention. * tag 'xen-arm-3.11-rc2-warn-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen: xen/arm,arm64: update xen_restart after ff701306cd49 and 7b6d864b48d9
2013-07-31x86, amd, microcode: Fix error path in apply_microcode_amd()Torsten Kaiser
Return -1 (like Intels apply_microcode) when the loading fails, also do not set the active microcode level on failure. Signed-off-by: Torsten Kaiser <just.for.lkml@googlemail.com> Link: http://lkml.kernel.org/r/20130723225823.2e4e7588@googlemail.com Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-07-31ARM: 7801/1: v6: prevent gcc 4.5 from reordering extended CP15 reads above ↵Paul Walmsley
is_smp() test Commit 621a0147d5c921f4cc33636ccd0602ad5d7cbfbc ("ARM: 7757/1: mm: don't flush icache in switch_mm with hardware broadcasting") breaks the boot on OMAP2430SDP with omap2plus_defconfig. Tracked to an undefined instruction abort from the CP15 read in cache_ops_need_broadcast(). It turns out that gcc 4.5 reorders the extended CP15 read above the is_smp() test. This breaks ARM1136 r0 cores, since they don't support several CP15 registers that later ARM cores do. ARM1136JF-S TRM section 3.2.1 "Register allocation" has the details. So mark the extended CP15 read as clobbering memory, which prevents the compiler from reordering it before the is_smp() test. Russell states that the code generated from this approach is preferable to marking the inline asm as volatile. Remove the existing condition code clobber as it's obsolete, per Nico's post: http://www.spinics.net/lists/arm-kernel/msg261208.html This patch is a collaboration with Will Deacon and Russell King. Comments from Paul Walmsley: Russell, if you accept this one, might you also add Will's ack from the lists: Comments from Paul Walmsley: I'd also be obliged if you could add a Cc: line for Jonathan Austin, since he helped test: Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-31ARM: 7800/1: ARMv7-M: Fix name of NVIC handler functionUwe Kleine-König
The name changed in response to review comments for the nvic irqchip driver when the original name was already accepted into Russell King's tree. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-31ARM: shmobile: lager: do not annotate gpio_buttons as __initdataSimon Horman
When the gpio-keys device is registered using platform_device_register_data() the platform data argument, lager_keys_pdata is duplicated and thus should be marked as __initdata to avoid wasting memory. However, this is not true of gpio_buttons, a reference to it rather than its value is duplicated when lager_keys_pdata is duplicated. This avoids accessing freed memory if gpio-key events occur after unused kernel memory is freed late in the kernel's boot. This but was added when support for gpio-keys was added to lager in c3842e4fcbb7664276443b79187b7808c2e80a35 ("ARM: shmobile: lager: support GPIO switches") which was included in v3.11-rc1. Tested-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-31ARM: shmobile: BOCK-W: fix SDHI0 PFC settingsSergei Shtylyov
The following message is printed on the BOCK-W kernel bootup: sh-pfc pfc-r8a7778: invalid group "sdhi0" for function "sdhi0" In addition, SD card cannot be detected. The reason is apparently that commit ca7bb309485e4ec89a9addd47bea (ARM: shmobile: bockw: add SDHI0 support) matched the previous version of commit 564617d2f92473031d035deb273da5 (sh-pfc: r8a7778: add SDHI support). Add the missing pin groups according to the BOCK-W board schematics. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-30Merge tag 'efi-urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent Pull EFI fix from Matt Fleming: * The size of memory that gets freed by free_pages() needs to be specified in pages, not bytes - by Roy Franz. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-30MIPS: BMIPS: fix slave CPU booting when physical CPU is not 0Florian Fainelli
The current BMIPS SMP code assumes that the slave CPU is physical and logical CPU 1, but on some systems such as BCM3368, the slave CPU is physical CPU0. Fix the code to read the physical CPU (thread ID) we are running this code on, and adjust the relocation vector address based on it. This allows bringing up the second CPU on BCM3368 for instance. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Cc: blogic@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/5621/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-30MIPS: BMIPS: do not change interrupt routing depending on boot CPUFlorian Fainelli
Commit 4df715aa ("MIPS: BMIPS: support booting from physical CPU other than 0") changed the interupt routing when we are booting from physical CPU 0, but the settings are actually correct if we are booting from physical CPU 0 or CPU 1. Revert that specific change. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Cc: blogic@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/5622/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-30MIPS: powertv: Fix arguments for free_reserved_area()Markos Chandras
Commit 6e7582bf35b8a5a330fd08b398ae445bac86917a "MIPS: PowerTV: use free_reserved_area() to simplify code" merged in 3.11-rc1, broke the build for the powertv defconfig with the following build error: arch/mips/powertv/asic/asic_devices.c: In function 'platform_release_memory': arch/mips/powertv/asic/asic_devices.c:533:7: error: passing argument 1 of 'free_reserved_area' makes pointer from integer without a cast [-Werror] The free_reserved_area() function expects a void * pointer for the start address and a void * pointer for the end one. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5624/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-30MIPS: Set default CPU type for BCM47XX platformsMarkos Chandras
If neither BCM47XX_SSD nor BCM47XX_BCMA is selected, then no CPU type is available leading to build problems. We fix this problem by using MIPS32r1 as the default CPU type for the BCM47XX platform. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5618/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-30MIPS: uapi/asm/siginfo.h: Fix GCC 4.1.2 compilationMaciej W. Rozycki
It wasn't until GCC 4.3 I believe that the __SIZEOF_*__ predefined macros were added. The change below switches <uapi/asm/siginfo.h> to the _MIPS_SZLONG macro so that compilation with e.g. GCC 4.1.2 succeeds. This is a user API header so I think this is even more important, for older userland support. The change adds an unsuccessful default too, to catch any compiler configuration oddities. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5630/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-30MIPS: Fix multiple definitions of UNCAC_BASE.Steven J. Hill
Fix build error below: arch/mips/include/asm/mach-generic/spaces.h:29:0: warning: "UNCAC_BASE" redefined [enabled by default] In file included from arch/mips/include/asm/addrspace.h:13:0, from arch/mips/include/asm/barrier.h:11, from arch/mips/include/asm/bitops.h:18, from include/linux/bitops.h:22, from include/linux/kernel.h:10, from include/asm-generic/bug.h:13, from arch/mips/include/asm/bug.h:41, from include/linux/bug.h:4, from include/linux/page-flags.h:9, from kernel/bounds.c:9: arch/mips/include/asm/mach-ar7/spaces.h:20:0: note: this is the location of the previous definition Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5583/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-30ARM: OMAP2+: hwmod: AM335x: fix cpgmac address spaceAfzal Mohammed
Register target address to be used for cpgmac is the second device address space. By default, hwmod picks first address space (0th index) for register target. With removal of address space from hwmod and using DT instead, cpgmac is getting wrong address space for register target. Fix it by indicating the address space to be used for register target. Signed-off-by: Afzal Mohammed <afzal@ti.com> Tested-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-07-30ARM: OMAP2+: hwmod: rt address space index for DTAfzal Mohammed
Address space is being removed from hwmod database and DT information in <reg> property is being used. Currently the 0th index of device address space is used to map for register target address. This is not always true, eg. cpgmac has it's sysconfig in second address space. Handle it by specifying index of device address space to be used for register target. As default value of this field would be zero with static initialization, existing behaviour of using first address space for register target while using DT would be kept as such. Signed-off-by: Afzal Mohammed <afzal@ti.com> Tested-by: Mugunthan V N <mugunthanvnm@ti.com> [paul@pwsan.com: use u8 rather than int to save memory] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-07-30ARM: OMAP2+: Sync hwmod state with the pm_runtime and omap_device stateRajendra Nayak
Some hwmods which are marked with HWMOD_INIT_NO_IDLE are left in enabled state post setup(). When a omap_device gets created for such hwmods make sure the omap_device and pm_runtime states are also in sync for such hwmods by doing a omap_device_enable() and pm_runtime_set_active() for the device. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Mark Jackson <mpfj-list@newflow.co.uk> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-07-30ARM: OMAP2+: Avoid idling memory controllers with no driversRajendra Nayak
Memory controllers in OMAP (like GPMC and EMIF) have the hwmods marked with HWMOD_INIT_NO_IDLE and are left in enabled state post initial setup. Even if they have drivers missing, avoid idling them as part of omap_device_late_idle() Signed-off-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Mark Jackson <mpfj-list@newflow.co.uk> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-07-30ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LLRajendra Nayak
With commit '82702ea11ddfe0e43382e1fa5b66d807d8114916' "ARM: OMAP2+: Fix serial init for device tree based booting" stubbing out omap_serial_early_init() for Device tree based booting, there was a crash observed on AM335x based devices when hwmod does a _setup_reset() early at boot. This was rootcaused to hwmod trying to reset console uart while earlycon was using it. The way to tell hwmod not to do this is to specify the HWMOD_INIT_NO_RESET flag, which were infact set by the omap_serial_early_init() function by parsing the cmdline to identify the console device. Parsing the cmdline to identify the uart used by earlycon itself seems broken as there is nothing preventing earlycon to use a different one. This patch, instead, attempts to populate the requiste flags for hwmod based on the CONFIG_DEBUG_OMAPxUARTy FLAGS. This gets rid of the need for cmdline parsing in the DT as well as non-DT cases to identify the uart used by earlycon. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reported-by: Mark Jackson <mpfj-list@newflow.co.uk> Reported-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Tested-by: Mark Jackson <mpfj-list@newflow.co.uk> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-07-29ARM: dts: omap5-uevm: update optional/unused regulator configurationsNishanth Menon
commit e00c27ef3b4c23e39d0a77b7c8e5be44c28001c7 (ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes) introduced regulator entries for OMAP5uEVM. However, The regulator information is based on an older temporary pre-production board variant and does not reflect production board 750-2628-XXX boards. The following optional/unused regulators can be updated: - SMPS9 supplies TWL6040 over VDDA_2v1_AUD. This regulator needs to be enabled only when audio is active. Since it does not come active by default, it does not require "always-on" or "boot-on". - LDO2 and LDO8 do not go to any peripheral or connector on the board. Further, these unused regulators should have been 2.8V for LDO2 and 3.0V for LDO8. Mark these LDOs as disabled in the dts until needed. Reported-by: Marc Jüttner <m-juettner@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: J Keerthy <j-keerthy@ti.com> Acked-by: Benoit Cousson <benoit.cousson@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-29ARM: dts: omap5-uevm: fix regulator configurations mandatory for SoCNishanth Menon
commit e00c27ef3b4c23e39d0a77b7c8e5be44c28001c7 (ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes) introduced regulator entries for OMAP5uEVM. However, The regulator information is based on an older temporary pre-production board variant and does not reflect production board 750-2628-XXX boards. The following fixes are hence mandatory to ensure right voltage is supplied to key OMAP5 SoC voltage rails: - LDO1 supplies VDDAPHY_CAM which is OMAP5's vdda_csiporta/b/c. This can only be supplied at 1.5V or 1.8V and we currently supply 2.8V. To prevent any potential device damage risk, use the specified 1.5V-1.8V supply. Remove 'always-on' and 'boot-on' settings here as it is a 'on need' supply to SoC IP and is not enabled by PMIC by default at boot. - LDO3 supplies Low Latency Interface(LLI) hardware module which is a special hardware to communicate with Modem. However since uEVM is not setup by default for this communication, this should be disabled by default. Further, vdda_lli is supposed to be 1.5V and not 3V. - LDO4 supplies VDDAPHY_DISP which is vdda_dsiporta/c/vdda_hdmi This can only be supplied at 1.5V or 1.8V and we currently supply 2.2V. To prevent any potential device damage risk, use the specified 1.5V-1.8V supply. Remove 'always-on' and 'boot-on' settings here as it is a 'on need' supply to SoC IP and is not enabled by PMIC by default at boot. - LDO6 supplies the board specified VDDS_1V2_WKUP supply going to ldo_emu_wkup/vdds_hsic. To stay within the SoC specification supply 1.2V instead of 1.5V. - LDO7 supplies VDD_VPP which is vpp1. This is currently configured for 1.5V which as per data manual "A pulse width of 1000 ns and an amplitude of 2V is required to program each eFuse bit. Otherwise, VPP1 must not be supplied". So, fix the voltage to 2V. and disable the supply since we have no plans of programming efuse bits - it can only be done once - in factory. Further it is not enabled by default by PMIC so, 'boot-on' must be removed, and the 'always-on' needs to be removed to achieve pulsing if efuse needs to be programmed. - LDO9 supplies the board specified vdds_sdcard supply going within SoC specification of 1.8V or 3.0V. Further the supply is controlled by switch enabled by REGEN3. So, introduce REGEN3 and map sdcard slot to be powered by LDO9. Remove 'always-on' allowing the LDO to be disabled on need basis. Reported-by: Marc Jüttner <m-juettner@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: J Keerthy <j-keerthy@ti.com> Acked-by: Benoit Cousson <benoit.cousson@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-29ARM: dts: omap5-uevm: document regulator signals used on the actual boardNishanth Menon
commit e00c27ef3b4c23e39d0a77b7c8e5be44c28001c7 (ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes) introduced regulator entries for OMAP5uEVM. However, currently we use the Palmas regulator names which is used for different purposes on uEVM. Document the same based on 750-2628-XXX boards - which is meant to be supported by this dts. Reported-by: Marc Jüttner <m-juettner@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: J Keerthy <j-keerthy@ti.com> Acked-by: Benoit Cousson <benoit.cousson@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-29Merge tag 'arc-v3.11-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fix from Vineet Gupta: "SMP build breakage fix" * tag 'arc-v3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: SMP build breakage
2013-07-29x86/mce: Fix mce regression from recent cleanupTony Luck
In commit 33d7885b594e169256daef652e8d3527b2298e75 x86/mce: Update MCE severity condition check We simplified the rules to recognise each classification of recoverable machine check combining the instruction and data fetch rules into a single entry based on clarifications in the June 2013 SDM that all recoverable events would be reported on the unaffected processor with MCG_STATUS.EIPV=0 and MCG_STATUS.RIPV=1. Unfortunately the simplified rule has a couple of bugs. Fix them here. Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-07-29KVM: s390: fix pfmf non-quiescing control handlingHeiko Carstens
Fix the test within handle_pfmf() if the host has the NQ key-setting facility installed. Right now the code would incorrectly generate a program check in the guest if the NQ control bit for a pfmf request was set and if the host has the NQ key-setting facility installed. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-29KVM: s390: move kvm_guest_enter,exit closer to sieDominik Dingel
Any uaccess between guest_enter and guest_exit could trigger a page fault, the page fault handler would handle it as a guest fault and translate a user address as guest address. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> CC: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-28Merge tag 'pinctrl-for-v3.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Driver fixes for AM33xx, SIRF and PFC pin controllers - Fix a compile warning from the pinctrl single-register driver - Fix a little nasty memory leak * tag 'pinctrl-for-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: fix a memleak when freeing maps pinctrl: pinctrl-single: fix compile warning when no CONFIG_PM pinctrl: sh-pfc: fix SDHI0 VccQ regulator on sh73a0 with DT arm/dts: sirf: fix the pingroup name mismatch between drivers and dts pinctrl: sirf: add usp0_uart_nostreamctrl pin group for usp-uart without flowctrl pinctrl: sirf: fix the pin number and mux bit for usp0 pinctrl: am33xx dt binding: correct include path
2013-07-27ARM: Fix sorting of machine- initializersRussell King
So, there's a comment I put at the top of this, which people seem to fail to read. So let's fix it for them instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-26ARC: SMP build breakageVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-07-26ARM: msm: Consolidate gpiomux for older architecturesRohit Vaswani
Msm gpiomux can be used only for 7x30 and 8x50. Prevent compilation and fix build issues on 7X00, 8X60 and 8960. Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2013-07-26Merge tag 'arm64-stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 fixes from Catalin Marinas: - Stack size increased to 16K (similar to other 64-bit architectures) - Additional cache flushing for secondary CPUs boot mode * tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Change kernel stack size to 16K arm64: Fix definition of arm_pm_restart to match the declaration arm64: virt: ensure visibility of __boot_cpu_mode
2013-07-26Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This is a largeish batch of fixes, mostly because I missed -rc2 due to travel/vacation. So in number these are a bit more than ideal unless you amortize them over two -rcs. Quick breakdown: - Defconfig updates - Making multi_v7_defconfig useful on more hardware to encourage single-image usage - Davinci and nomadik updates due to new code merged this merge window - Fixes for UART on Samsung platforms, both PM and clock-related - A handful of warning fixes from defconfig builds, including for max8925 backlight and pxamci (both with appropriate acks) - Exynos5440 fixes for LPAE configuration, PM - ...plus a bunch of other smaller changes all over the place I expect to switch to regressions-or-severe-bugs-only fixes from here on out" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) mfd: max8925: fix dt code for backlight ARM: omap5: Only select errata 798181 if SMP ARM: EXYNOS: Update CONFIG_ARCH_NR_GPIO for Exynos ARM: EXYNOS: Fix low level debug support ARM: SAMSUNG: Save/restore only selected uart's registers ARM: SAMSUNG: Add SAMSUNG_PM config option to select pm ARM: S3C24XX: Add missing clkdev entries for s3c2440 UART ARM: multi_v7_defconfig: Select USB chipidea driver ARM: pxa: propagate errors from regulator_enable() to pxamci ARM: zynq: fix compilation warning ARM: keystone: fix compilation warning ARM: highbank: Only touch common coherency control register fields ARM: footbridge: fix overlapping PCI mappings dmaengine: shdma: fix a build failure on platforms with no DMA support ARM: STi: Set correct ARM ERRATAs. ARM: dts: STi: Fix pinconf setup for STiH416 serial2 ARM: nomadik: configure for NO_HZ and HRTIMERS ARM: nomadik: update defconfig base ARM: nomadik: Update MMC defconfigs ARM: davinci: defconfig: enable EDMA driver ...
2013-07-26x86, fpu: correct the asm constraints for fxsave, unbreak mxcsr.dazH.J. Lu
GCC will optimize mxcsr_feature_mask_init in arch/x86/kernel/i387.c: memset(&fx_scratch, 0, sizeof(struct i387_fxsave_struct)); asm volatile("fxsave %0" : : "m" (fx_scratch)); mask = fx_scratch.mxcsr_mask; if (mask == 0) mask = 0x0000ffbf; to memset(&fx_scratch, 0, sizeof(struct i387_fxsave_struct)); asm volatile("fxsave %0" : : "m" (fx_scratch)); mask = 0x0000ffbf; since asm statement doesn’t say it will update fx_scratch. As the result, the DAZ bit will be cleared. This patch fixes it. This bug dates back to at least kernel 2.6.12. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org>
2013-07-26x86, efi: correct call to free_pagesRoy Franz
Specify memory size in pages, not bytes. Signed-off-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-07-26arm64: Change kernel stack size to 16KFeng Kan
Written by Catalin Marinas, tested by APM on storm platform. This is needed because of the failures encountered when running SpecWeb benchmark test. Signed-off-by: Feng Kan <fkan@apm.com> Acked-by: Kumar Sankaran <ksankaran@apm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-07-26s390/perf: fix compile error (undefined reference sie_exit)Heiko Carstens
The perf_event code references sie_exit even if KVM is not available. So add proper ifdefs to fix this one: arch/s390/built-in.o: In function `sys_call_table_emu': (.rodata+0x2b98): undefined reference to `sie_exit' arch/s390/built-in.o: In function `sys_call_table_emu': (.rodata+0x2ba0): undefined reference to `sie_exit' make: *** [vmlinux] Error 1 Reported-by: Zhouping Liu <zliu@redhat.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-26s390/bitops: fix find_next_bit_leftMartin Schwidefsky
The find_next_bit_left function is broken if used with an offset which is not a multiple of 64. The shift to mask the bits of a 64-bit word not to search is in the wrong direction, the result can be either a bit found smaller than the offset or failure to find a set bit. Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-26s390: add support for IBM zBC12 machineHeiko Carstens
Just add the new model number where appropiate. Cc: stable@vger.kernel.org # v3.10 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-26s390/Kconfig: select 'TTY' when 'S390_GUEST' is enabledChen Gang
'VIRTIO_CONSOLE' depends on 'TTY', so need to select 'TTY' explicitly before selecting 'VIRTIO_CONSOLE'. Otherwise randconfig can generate a config file which enables 'VIRTIO_CONSOLE' but has 'TTY' disabled. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-26s390: add support for LZ4-compressed kernelHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-17 15:16:42 +0000