aboutsummaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2015-05-03Merge tag 'powerpc-4.1-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc fixes from Michael Ellerman: - build fix for SMP=n in book3s_xics.c - fix for Daniel's pci_controller_ops on powernv. - revert the TM syscall abort patch for now. - CPU affinity fix from Nathan. - two EEH fixes from Gavin. - fix for CR corruption from Sam. - selftest build fix. * tag 'powerpc-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/powernv: Restore non-volatile CRs after nap powerpc/eeh: Delay probing EEH device during hotplug powerpc/eeh: Fix race condition in pcibios_set_pcie_reset_state() powerpc/pseries: Correct cpu affinity for dlpar added cpus selftests/powerpc: Fix the pmu install rule Revert "powerpc/tm: Abort syscalls in active transactions" powerpc/powernv: Fix early pci_controller_ops loading. powerpc/kvm: Fix SMP=n build error in book3s_xics.c
2015-05-01Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Not too much here, but we've addressed a couple of nasty issues in the dma-mapping code as well as adding the halfword and byte variants of load_acquire/store_release following on from the CSD locking bug that you fixed in the core. - fix perf devicetree warnings at probe time - fix memory leak in __dma_free() - ensure DMA buffers are always zeroed - show IRQ trigger in /proc/interrupts (for parity with ARM) - implement byte and halfword access for smp_{load_acquire,store_release}" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: perf: Fix the pmu node name in warning message arm64: perf: don't warn about missing interrupt-affinity property for PPIs arm64: add missing PAGE_ALIGN() to __dma_free() arm64: dma-mapping: always clear allocated buffers ARM64: Enable CONFIG_GENERIC_IRQ_SHOW_LEVEL arm64: add missing data types in smp_load_acquire/smp_store_release
2015-05-01powerpc/powernv: Restore non-volatile CRs after napSam Bobroff
Patches 7cba160ad "powernv/cpuidle: Redesign idle states management" and 77b54e9f2 "powernv/powerpc: Add winkle support for offline cpus" use non-volatile condition registers (cr2, cr3 and cr4) early in the system reset interrupt handler (system_reset_pSeries()) before it has been determined if state loss has occurred. If state loss has not occurred, control returns via the power7_wakeup_noloss() path which does not restore those condition registers, leaving them corrupted. Fix this by restoring the condition registers in the power7_wakeup_noloss() case. This is apparent when running a KVM guest on hardware that does not support winkle or sleep and the guest makes use of secondary threads. In practice this means Power7 machines, though some early unreleased Power8 machines may also be susceptible. The secondary CPUs are taken off line before the guest is started and they call pnv_smp_cpu_kill_self(). This checks support for sleep states (in this case there is no support) and power7_nap() is called. When the CPU is woken, power7_nap() returns and because the CPU is still off line, the main while loop executes again. The sleep states support test is executed again, but because the tested values cannot have changed, the compiler has optimized the test away and instead we rely on the result of the first test, which has been left in cr3 and/or cr4. With the result overwritten, the wrong branch is taken and power7_winkle() is called on a CPU that does not support it, leading to it stalling. Fixes: 7cba160ad789 ("powernv/cpuidle: Redesign idle states management") Fixes: 77b54e9f213f ("powernv/powerpc: Add winkle support for offline cpus") [mpe: Massage change log a bit more] Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-05-01powerpc/eeh: Delay probing EEH device during hotplugGavin Shan
Commit 1c509148b ("powerpc/eeh: Do probe on pci_dn") probes EEH devices in early stage, which is reasonable to pSeries platform. However, it's wrong for PowerNV platform because the PE# isn't determined until the resources (IO and MMIO) are assigned to PE in hotplug case. So we have to delay probing EEH devices for PowerNV platform until the PE# is assigned. Fixes: ff57b454ddb9 ("powerpc/eeh: Do probe on pci_dn") Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-05-01powerpc/eeh: Fix race condition in pcibios_set_pcie_reset_state()Gavin Shan
When asserting reset in pcibios_set_pcie_reset_state(), the PE is enforced to (hardware) frozen state in order to drop unexpected PCI transactions (except PCI config read/write) automatically by hardware during reset, which would cause recursive EEH error. However, the (software) frozen state EEH_PE_ISOLATED is missed. When users get 0xFF from PCI config or MMIO read, EEH_PE_ISOLATED is set in PE state retrival backend. Unfortunately, nobody (the reset handler or the EEH recovery functinality in host) will clear EEH_PE_ISOLATED when the PE has been passed through to guest. The patch sets and clears EEH_PE_ISOLATED properly during reset in function pcibios_set_pcie_reset_state() to fix the issue. Fixes: 28158cd ("Enhance pcibios_set_pcie_reset_state()") Reported-by: Carol L. Soto <clsoto@us.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Tested-by: Carol L. Soto <clsoto@us.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-05-01powerpc/pseries: Correct cpu affinity for dlpar added cpusNathan Fontenot
The incorrect ordering of operations during cpu dlpar add results in invalid affinity for the cpu being added. The ibm,associativity property in the device tree is populated with all zeroes for the added cpu which results in invalid affinity mappings and all cpus appear to belong to node 0. This occurs because rtas configure-connector is called prior to making the rtas set-indicator calls. Phyp does not assign affinity information for a cpu until the rtas set-indicator calls are made to set the isolation and allocation state. Correct the order of operations to make the rtas set-indicator calls (done in dlpar_acquire_drc) before calling rtas configure-connector. Fixes: 1a8061c46c46 ("powerpc/pseries: Add kernel based CPU DLPAR handling") Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-30Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm changes from Paolo Bonzini: "Remove from guest code the handling of task migration during a pvclock read; instead use the correct protocol in KVM. This removes the need for task migration notifiers in core scheduler code" [ The scheduler people really hated the migration notifiers, so this was kind of required - Linus ] * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: x86: pvclock: Really remove the sched notifier for cross-cpu migrations kvm: x86: fix kvmclock update protocol
2015-04-30arm64: perf: Fix the pmu node name in warning messageSuzuki K. Poulose
With commit d5efd9cc9cf2 ("arm64: pmu: add support for interrupt-affinity property"), we print a warning when we find a PMU SPI with a missing missing interrupt-affinity property in a pmu node. Unfortunately, we pass the wrong (NULL) device node to of_node_full_name, resulting in unhelpful messages such as: hw perfevents: Failed to parse <no-node>/interrupt-affinity[0] This patch fixes the name to that of the pmu node. Fixes: d5efd9cc9cf2 (arm64: pmu: add support for interrupt-affinity property) Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-04-30arm64: perf: don't warn about missing interrupt-affinity property for PPIsWill Deacon
PPIs are affine by nature, so the interrupt-affinity property is not used and therefore we shouldn't print a warning in its absence. Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-04-30Revert "powerpc/tm: Abort syscalls in active transactions"Michael Ellerman
This reverts commit feba40362b11341bee6d8ed58d54b896abbd9f84. Although the principle of this change is good, the implementation has a few issues. Firstly we can sometimes fail to abort a syscall because r12 may have been clobbered by C code if we went down the virtual CPU accounting path, or if syscall tracing was enabled. Secondly we have decided that it is safer to abort the syscall even earlier in the syscall entry path, so that we avoid the syscall tracing path when we are transactional. So that we have time to thoroughly test those changes we have decided to revert this for this merge window and will merge the fixed version in the next window. NB. Rather than reverting the selftest we just drop tm-syscall from TEST_PROGS so that it's not run by default. Fixes: feba40362b11 ("powerpc/tm: Abort syscalls in active transactions") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-29arm64: add missing PAGE_ALIGN() to __dma_free()Dean Nelson
__dma_alloc() does a PAGE_ALIGN() on the passed in size argument before doing anything else. __dma_free() does not. And because it doesn't, it is possible to leak memory should size not be an integer multiple of PAGE_SIZE. The solution is to add a PAGE_ALIGN() to __dma_free() like is done in __dma_alloc(). Additionally, this patch removes a redundant PAGE_ALIGN() from __dma_alloc_coherent(), since __dma_alloc_coherent() can only be called from __dma_alloc(), which already does a PAGE_ALIGN() before the call. Cc: stable@vger.kernel.org Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-04-29powerpc/powernv: Fix early pci_controller_ops loading.Daniel Axtens
Load the PowerNV platform pci controller ops into pci controllers after all the operations are loaded into the platform ops struct, not before. Otherwise we aren't actually setting the ops properly which can break IO for some devices. Fixes: 65ebf4b63 ("powerpc/powernv: Move controller ops from ppc_md to controller_ops") Reported-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-29powerpc/kvm: Fix SMP=n build error in book3s_xics.cMichael Ellerman
Commit 34cb7954c0aa "Convert ICS mutex lock to spin lock" added an include of asm/spinlock.h, which does not work in the SMP=n case. It should instead include linux/spinlock.h Fixes: 34cb7954c0aa ("KVM: PPC: Book3S HV: Convert ICS mutex lock to spin lock") Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-28Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile bugfix from Chris Metcalf: "This just fixes a compiler warning from an old bug that only recently started generating a warning" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: properly use node_isset() on a nodemask_t
2015-04-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "One additional new feature for 4.1, a new PRNG based on SHA-512 for the zcrypt driver. Two memory management related changes, the page table reallocation for KVM is removed, and with file ptes gone the encoding of page table entries is improved. And three bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: Introduce new SHA-512 based Pseudo Random Generator. s390/mm: change swap pte encoding and pgtable cleanup s390/mm: correct transfer of dirty & young bits in __pmd_to_pte s390/bpf: add dependency to z196 features s390/3215: free memory in error path s390/kvm: remove delayed reallocation of page tables for KVM kexec: allocate the kexec control page with KEXEC_CONTROL_MEMORY_GFP
2015-04-28tile: properly use node_isset() on a nodemask_tChris Metcalf
The code accidentally used cpu_isset() previously in one place (though properly node_isset() elsewhere). Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2015-04-27x86: pvclock: Really remove the sched notifier for cross-cpu migrationsPaolo Bonzini
This reverts commits 0a4e6be9ca17c54817cf814b4b5aa60478c6df27 and 80f7fdb1c7f0f9266421f823964fd1962681f6ce. The task migration notifier was originally introduced in order to support the pvclock vsyscall with non-synchronized TSC, but KVM only supports it with synchronized TSC. Hence, on KVM the race condition is only needed due to a bad implementation on the host side, and even then it's so rare that it's mostly theoretical. As far as KVM is concerned it's possible to fix the host, avoiding the additional complexity in the vDSO and the (re)introduction of the task migration notifier. Xen, on the other hand, hasn't yet implemented vsyscall support at all, so we do not care about its plans for non-synchronized TSC. Reported-by: Peter Zijlstra <peterz@infradead.org> Suggested-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-27kvm: x86: fix kvmclock update protocolRadim Krčmář
The kvmclock spec says that the host will increment a version field to an odd number, then update stuff, then increment it to an even number. The host is buggy and doesn't do this, and the result is observable when one vcpu reads another vcpu's kvmclock data. There's no good way for a guest kernel to keep its vdso from reading a different vcpu's kvmclock data, but we don't need to care about changing VCPUs as long as we read a consistent data from kvmclock. (VCPU can change outside of this loop too, so it doesn't matter if we return a value not fit for this VCPU.) Based on a patch by Radim Krčmář. Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-27arm64: dma-mapping: always clear allocated buffersMarek Szyprowski
Buffers allocated by dma_alloc_coherent() are always zeroed on Alpha, ARM (32bit), MIPS, PowerPC, x86/x86_64 and probably other architectures. It turned out that some drivers rely on this 'feature'. Allocated buffer might be also exposed to userspace with dma_mmap() call, so clearing it is desired from security point of view to avoid exposing random memory to userspace. This patch unifies dma_alloc_coherent() behavior on ARM64 architecture with other implementations by unconditionally zeroing allocated buffer. Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-04-27ARM64: Enable CONFIG_GENERIC_IRQ_SHOW_LEVELSudeep Holla
Since several interrupt controllers including GIC support both edge and level triggered interrupts, it's useful to provide that information in /proc/interrupts even on ARM64 similar to ARM and PPC. This is based on Geert Uytterhoeven's commit 7c07005eea96 ("ARM: 8339/1: Enable CONFIG_GENERIC_IRQ_SHOW_LEVEL") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-04-27arm64: add missing data types in smp_load_acquire/smp_store_releaseAndre Przywara
Commit 8053871d0f7f ("smp: Fix smp_call_function_single_async() locking") introduced a call to smp_load_acquire() with a u16 argument, but we only cared about u32 and u64 types in that function so far. This resulted in a compiler warning fortunately, pointing at an uninitialized use. Due to the implementation structure the compiler misses that bug in the smp_store_release(), though. Add the u16 and u8 variants using ldarh/stlrh and ldarb/stlrb, respectively. Together with the compiletime_assert_atomic_type() check this should cover all cases now. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-04-26x86_64, asm: Work around AMD SYSRET SS descriptor attribute issueAndy Lutomirski
AMD CPUs don't reinitialize the SS descriptor on SYSRET, so SYSRET with SS == 0 results in an invalid usermode state in which SS is apparently equal to __USER_DS but causes #SS if used. Work around the issue by setting SS to __KERNEL_DS __switch_to, thus ensuring that SYSRET never happens with SS set to NULL. This was exposed by a recent vDSO cleanup. Fixes: e7d6eefaaa44 x86/vdso32/syscall.S: Do not load __USER32_DS to %ss Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Brian Gerst <brgerst@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull fourth vfs update from Al Viro: "d_inode() annotations from David Howells (sat in for-next since before the beginning of merge window) + four assorted fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: RCU pathwalk breakage when running into a symlink overmounting something fix I_DIO_WAKEUP definition direct-io: only inc/dec inode->i_dio_count for file systems fs/9p: fix readdir() VFS: assorted d_backing_inode() annotations VFS: fs/inode.c helpers: d_inode() annotations VFS: fs/cachefiles: d_backing_inode() annotations VFS: fs library helpers: d_inode() annotations VFS: assorted weird filesystems: d_inode() annotations VFS: normal filesystems (and lustre): d_inode() annotations VFS: security/: d_inode() annotations VFS: security/: d_backing_inode() annotations VFS: net/: d_inode() annotations VFS: net/unix: d_backing_inode() annotations VFS: kernel/: d_inode() annotations VFS: audit: d_backing_inode() annotations VFS: Fix up some ->d_inode accesses in the chelsio driver VFS: Cachefiles should perform fs modifications on the top layer only VFS: AF_UNIX sockets should call mknod on the top layer only
2015-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto fixes from Herbert Xu: "This push fixes a build problem with img-hash under non-standard configurations and a serious regression with sha512_ssse3 which can lead to boot failures" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: img-hash - CRYPTO_DEV_IMGTEC_HASH should depend on HAS_DMA crypto: x86/sha512_ssse3 - fixup for asm function prototype change
2015-04-26Merge tag 'cris-for-4.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris Pull arch/cris updates from Jesper Nilsson: "Some much needed love for the CRIS-port. There's a bunch of changes this time, giving the CRISv32 port a bit of modern makeover with device-tree, irq domain and gpiolib support, and more switchover to generic frameworks. Some small fixes and removal of the theoretical SMP support brings up the rear" * tag 'cris-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: cris: fix integer overflow in ELF_ET_DYN_BASE CRISv32: use GENERIC_SCHED_CLOCK CRISv32: use MMIO clocksource CRISv32: use generic clockevents CRIS: use generic headers via Kbuild CRIS: use generic cmpxchg.h CRIS: use generic atomic.h CRIS: use generic atomic bitops CRISv10: remove redundant macros from system.h CRIS: remove SMP code CRISv32: don't enable irqs in INIT_THREAD CRISv32: handle multiple signals CRISv32: prevent bogus restarts on sigreturn CRISv32: don't attempt syscall restart on irq exit Add binding documentation for CRIS CRIS: add Axis 88 board device tree CRISv32: add device tree support CRISv32: add irq domains support CRIS: enable GPIOLIB
2015-04-26Merge tag 'powerpc-4.1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc fixes from Michael Ellerman: - fix for mm_dec_nr_pmds() from Scott. - fixes for oopses seen with KVM + THP from Aneesh. - build fixes from Aneesh & Shreyas. * tag 'powerpc-4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/mm: Fix build error with CONFIG_PPC_TRANSACTIONAL_MEM disabled powerpc/kvm: Fix ppc64_defconfig + PPC_POWERNV=n build error powerpc/mm/thp: Return pte address if we find trans_splitting. powerpc/mm/thp: Make page table walk safe against thp split/collapse KVM: PPC: Remove page table walk helpers KVM: PPC: Use READ_ONCE when dereferencing pte_t pointer powerpc/hugetlb: Call mm_dec_nr_pmds() in hugetlb_free_pmd_range()
2015-04-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull second batch of KVM changes from Paolo Bonzini: "This mostly includes the PPC changes for 4.1, which this time cover Book3S HV only (debugging aids, minor performance improvements and some cleanups). But there are also bug fixes and small cleanups for ARM, x86 and s390. The task_migration_notifier revert and real fix is still pending review, but I'll send it as soon as possible after -rc1" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (29 commits) KVM: arm/arm64: check IRQ number on userland injection KVM: arm: irqfd: fix value returned by kvm_irq_map_gsi KVM: VMX: Preserve host CR4.MCE value while in guest mode. KVM: PPC: Book3S HV: Use msgsnd for signalling threads on POWER8 KVM: PPC: Book3S HV: Translate kvmhv_commence_exit to C KVM: PPC: Book3S HV: Streamline guest entry and exit KVM: PPC: Book3S HV: Use bitmap of active threads rather than count KVM: PPC: Book3S HV: Use decrementer to wake napping threads KVM: PPC: Book3S HV: Don't wake thread with no vcpu on guest IPI KVM: PPC: Book3S HV: Get rid of vcore nap_count and n_woken KVM: PPC: Book3S HV: Move vcore preemption point up into kvmppc_run_vcpu KVM: PPC: Book3S HV: Minor cleanups KVM: PPC: Book3S HV: Simplify handling of VCPUs that need a VPA update KVM: PPC: Book3S HV: Accumulate timing information for real-mode code KVM: PPC: Book3S HV: Create debugfs file for each guest's HPT KVM: PPC: Book3S HV: Add ICP real mode counters KVM: PPC: Book3S HV: Move virtual mode ICP functions to real-mode KVM: PPC: Book3S HV: Convert ICS mutex lock to spin lock KVM: PPC: Book3S HV: Add guest->host real mode completion counters KVM: PPC: Book3S HV: Add helpers for lock/unlock hpte ...
2015-04-24Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine updates from Vinod Koul: - new drivers for: - Ingenic JZ4780 controller - APM X-Gene controller - Freescale RaidEngine device - Renesas USB Controller - remove device_alloc_chan_resources dummy handlers - sh driver cleanups for peri peri and related emmc and asoc patches as well - fixes and enhancements spread over the drivers * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (59 commits) dmaengine: dw: don't prompt for DW_DMAC_CORE dmaengine: shdmac: avoid unused variable warnings dmaengine: fix platform_no_drv_owner.cocci warnings dmaengine: pch_dma: fix memory leak on failure path in pch_dma_probe() dmaengine: at_xdmac: unlock spin lock before return dmaengine: xgene: devm_ioremap() returns NULL on error dmaengine: xgene: buffer overflow in xgene_dma_init_channels() dmaengine: usb-dmac: Fix dereferencing freed memory 'desc' dmaengine: sa11x0: report slave capabilities to upper layers dmaengine: vdma: Fix compilation warnings dmaengine: fsl_raid: statify fsl_re_chan_probe dmaengine: Driver support for FSL RaidEngine device. dmaengine: xgene_dma_init_ring_mngr() can be static Documentation: dma: Add documentation for the APM X-Gene SoC DMA device DTS binding arm64: dts: Add APM X-Gene SoC DMA device and DMA clock DTS nodes dmaengine: Add support for APM X-Gene SoC DMA engine driver dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver dmaengine: renesas,usb-dmac: Add device tree bindings documentation dmaengine: edma: fixed wrongly initialized data parameter to the edma callback dmaengine: ste_dma40: fix implicit conversion ...
2015-04-24Merge tag 'devicetree-for-4.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull second batch of devicetree updates from Rob Herring: "As Grant mentioned in the first devicetree pull request, here is the 2nd batch of DT changes for 4.1. The main remaining item here is the endianness bindings and related 8250 driver support. - DT endianness specification bindings - big-endian 8250 serial support - DT overlay unittest updates - various DT doc updates - compile fixes for OF_IRQ=n" * tag 'devicetree-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: frv: add io{read,write}{16,32}be functions mn10300: add io{read,write}{16,32}be functions Documentation: DT bindings: add doc for Altera's SoCFPGA platform of: base: improve of_get_next_child() kernel-doc Doc: dt: arch_timer: discourage clock-frequency use of: unittest: overlay: Keep track of created overlays of/fdt: fix allocation size for device node path serial: of_serial: Support big-endian register accesses serial: 8250: Add support for big-endian MMIO accesses of: Document {little,big,native}-endian bindings of/fdt: Add endianness helper function for early init code of: Add helper function to check MMIO register endianness of/fdt: Remove "reg" data prints from early_init_dt_scan_memory of: add vendor prefix for Artesyn of: Add dummy of_irq_to_resource_table() for IRQ_OF=n of: OF_IRQ should depend on IRQ_DOMAIN
2015-04-24Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull initial ACPI support for arm64 from Will Deacon: "This series introduces preliminary ACPI 5.1 support to the arm64 kernel using the "hardware reduced" profile. We don't support any peripherals yet, so it's fairly limited in scope: - MEMORY init (UEFI) - ACPI discovery (RSDP via UEFI) - CPU init (FADT) - GIC init (MADT) - SMP boot (MADT + PSCI) - ACPI Kconfig options (dependent on EXPERT) ACPI for arm64 has been in development for a while now and hardware has been available that can boot with either FDT or ACPI tables. This has been made possible by both changes to the ACPI spec to cater for ARM-based machines (known as "hardware-reduced" in ACPI parlance) but also a Linaro-driven effort to get this supported on top of the Linux kernel. This pull request is the result of that work. These changes allow us to initialise the CPUs, interrupt controller, and timers via ACPI tables, with memory information and cmdline coming from EFI. We don't support a hybrid ACPI/FDT scheme. Of course, there is still plenty of work to do (a serial console would be nice!) but I expect that to happen on a per-driver basis after this core series has been merged. Anyway, the diff stat here is fairly horrible, but splitting this up and merging it via all the different subsystems would have been extremely painful. Instead, we've got all the relevant Acks in place and I've not seen anything other than trivial (Kconfig) conflicts in -next (for completeness, I've included my resolution below). Nearly half of the insertions fall under Documentation/. So, we'll see how this goes. Right now, it all depends on EXPERT and I fully expect people to use FDT by default for the immediate future" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (31 commits) ARM64 / ACPI: make acpi_map_gic_cpu_interface() as void function ARM64 / ACPI: Ignore the return error value of acpi_map_gic_cpu_interface() ARM64 / ACPI: fix usage of acpi_map_gic_cpu_interface ARM64: kernel: acpi: honour acpi=force command line parameter ARM64: kernel: acpi: refactor ACPI tables init and checks ARM64: kernel: psci: let ACPI probe PSCI version ARM64: kernel: psci: factor out probe function ACPI: move arm64 GSI IRQ model to generic GSI IRQ layer ARM64 / ACPI: Don't unflatten device tree if acpi=force is passed ARM64 / ACPI: additions of ACPI documentation for arm64 Documentation: ACPI for ARM64 ARM64 / ACPI: Enable ARM64 in Kconfig XEN / ACPI: Make XEN ACPI depend on X86 ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64 clocksource / arch_timer: Parse GTDT to initialize arch timer irqchip: Add GICv2 specific ACPI boot support ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi ACPI / processor: Make it possible to get CPU hardware ID via GICC ACPI / processor: Introduce phys_cpuid_t for CPU hardware ID ARM64 / ACPI: Parse MADT for SMP initialization ...
2015-04-24Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "A few fixes for the recently merged development updates: - the update to convert a code branch in the procinfo structure forgot to update the nommu code. - VDSO only supported for V7 CPUs and later. - VDSO build creates files which should be ignored by git but are not. - ensure that make arch/arm/vdso/ doesn't build if it isn't enabled" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8344/1: VDSO: honor CONFIG_VDSO in Makefile ARM: 8343/1: VDSO: add build artifacts to .gitignore ARM: Fix nommu booting ARM: 8342/1: VDSO: depend on CPU_V7
2015-04-24Merge tag 'nios2-v4.1-rc1' of git://git.rocketboards.org/linux-socfpga-nextLinus Torvalds
Pull arch/nios2 updates from Ley Foon Tan: - update cache management code - rework trap handler with new define trap #. - fix on check header warning. * tag 'nios2-v4.1-rc1' of git://git.rocketboards.org/linux-socfpga-next: nios2: rework cache nios2: Add types.h header required for __u32 type nios2: rework trap handler nios2: remove end address checking for initda
2015-04-24Merge tag 'blackfin-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux Pull blackfin updates from Steven Miao. * tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux: eth: bf609 eth clock: add pclk clock for stmmac driver probe blackfin: Wire up missing syscalls arch: blackfin: kernel: kgdb: Remove unused function dma: fix build error after update to v3.19 blackfin: io: define __raw_readx/writex with bfin_readx/writex bf609: add resources for lcd nl8048 pm: sometimes wake up from suspend to RAM would fail debug-mmrs: Eliminate all traces of the USB_PHY_TEST MMR bf609: remove softswitch i2c configuration from adv7842 and adv7511 platform data bf609: add platform data for soft switch devices on the video extenders bf609: enable soft switch gpio driver by default bf609: add gpio soft switch platform data for mcp23017 i2c devices bf609: use new SND_BF6XX_PCM to choose audio pcm driver bug[220] kgdb: change the smp cross core function entry arch: blackfin: kernel: setup.c: Cleaning up missing null-terminate in conjunction with strncpy blackfin: defconfigs: cleanup unused CONFIG_MTD_CHAR, add MTD_SPI_NOR for BF537-STAMP
2015-04-24Merge tag 'metag-for-v4.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag Pull Metag architecture updates from James Hogan: "Just the one change for v4.1-rc1. A minor cleanup of copy_thread()" * tag 'metag-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: metag: copy_thread(): rename 'arg' argument to 'kthread_arg'
2015-04-24Merge tag 'arc-4.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: - perf fixes/improvements - misc cleanups * tag 'arc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: perf: don't add code for impossible case ARC: perf: Rename DT binding to not confuse with power mgmt ARC: perf: add user space attribution in callchains ARC: perf: Add kernel callchain support ARC: perf: support cache hit/miss ratio ARC: perf: Add some comments/debug stuff ARC: perf: make @arc_pmu static global ARC: mem init spring cleaning - No functional changes ARC: Fix RTT boot printing ARC: fold __builtin_constant_p() into test_bit() ARC: rename unhandled exception handler ARC: cosmetic: Remove unused ECR bitfield masks ARC: Fix WRITE_BCR ARC: [nsimosci] Update defconfig arc: copy_thread(): rename 'arg' argument to 'kthread_arg'
2015-04-24x86: fix special __probe_kernel_write() tail zeroing caseLinus Torvalds
Commit cae2a173fe94 ("x86: clean up/fix 'copy_in_user()' tail zeroing") fixed the failure case tail zeroing of one special case of the x86-64 generic user-copy routine, namely when used for the user-to-user case ("copy_in_user()"). But in the process it broke an even more unusual case: using the user copy routine for kernel-to-kernel copying. Now, normally kernel-kernel copies are obviously done using memcpy(), but we have a couple of special cases when we use the user-copy functions. One is when we pass a kernel buffer to a regular user-buffer routine, using set_fs(KERNEL_DS). That's a "normal" case, and continued to work fine, because it never takes any faults (with the possible exception of a silent and successful vmalloc fault). But Jan Beulich pointed out another, very unusual, special case: when we use the user-copy routines not because it's a path that expects a user pointer, but for a couple of ftrace/kgdb cases that want to do a kernel copy, but do so using "unsafe" buffers, and use the user-copy routine to gracefully handle faults. IOW, for probe_kernel_write(). And that broke for the case of a faulting kernel destination, because we saw the kernel destination and wanted to try to clear the tail of the buffer. Which doesn't work, since that's what faults. This only triggers for things like kgdb and ftrace users (eg trying setting a breakpoint on read-only memory), but it's definitely a bug. The fix is to not compare against the kernel address start (TASK_SIZE), but instead use the same limits "access_ok()" uses. Reported-and-tested-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org # 4.0 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-24crypto: x86/sha512_ssse3 - fixup for asm function prototype changeArd Biesheuvel
Patch e68410ebf626 ("crypto: x86/sha512_ssse3 - move SHA-384/512 SSSE3 implementation to base layer") changed the prototypes of the core asm SHA-512 implementations so that they are compatible with the prototype used by the base layer. However, in one instance, the register that was used for passing the input buffer was reused as a scratch register later on in the code, and since the input buffer param changed places with the digest param -which needs to be written back before the function returns- this resulted in the scratch register to be dereferenced in a memory write operation, causing a GPF. Fix this by changing the scratch register to use the same register as the input buffer param again. Fixes: e68410ebf626 ("crypto: x86/sha512_ssse3 - move SHA-384/512 SSSE3 implementation to base layer") Reported-By: Bobby Powers <bobbypowers@gmail.com> Tested-By: Bobby Powers <bobbypowers@gmail.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-24nios2: rework cacheLey Foon Tan
- flush dcache before flush instruction cache - remork update_mmu_cache and flush_dcache_page - add shmparam.h Signed-off-by: Ley Foon Tan <lftan@altera.com>
2015-04-24nios2: Add types.h header required for __u32 typeEzequiel Garcia
Reported by the header checker (CONFIG_HEADERS_CHECK=y): CHECK usr/include/asm/ (31 files) ./usr/include/asm/ptrace.h:77: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Ley Foon Tan <lftan@altera.com>
2015-04-24eth: bf609 eth clock: add pclk clock for stmmac driver probeSteven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com>
2015-04-24blackfin: Wire up missing syscallsChen Gang
The related syscalls are below which may cause samples/kdbus building break in next-20150401 tree, the related information and error: CALL scripts/checksyscalls.sh <stdin>:1223:2: warning: #warning syscall kcmp not implemented [-Wcpp] <stdin>:1226:2: warning: #warning syscall finit_module not implemented [-Wcpp] <stdin>:1229:2: warning: #warning syscall sched_setattr not implemented [-Wcpp] <stdin>:1232:2: warning: #warning syscall sched_getattr not implemented [-Wcpp] <stdin>:1235:2: warning: #warning syscall renameat2 not implemented [-Wcpp] <stdin>:1238:2: warning: #warning syscall seccomp not implemented [-Wcpp] <stdin>:1241:2: warning: #warning syscall getrandom not implemented [-Wcpp] <stdin>:1244:2: warning: #warning syscall memfd_create not implemented [-Wcpp] <stdin>:1247:2: warning: #warning syscall bpf not implemented [-Wcpp] <stdin>:1250:2: warning: #warning syscall execveat not implemented [-Wcpp] [...] HOSTCC samples/kdbus/kdbus-workers samples/kdbus/kdbus-workers.c: In function ‘prime_new’: samples/kdbus/kdbus-workers.c:930:18: error: ‘__NR_memfd_create’ undeclared (first use in this function) p->fd = syscall(__NR_memfd_create, "prime-area", MFD_CLOEXEC); ^ samples/kdbus/kdbus-workers.c:930:18: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
2015-04-23Merge branches 'misc' and 'vdso' into for-nextRussell King
2015-04-23arch: blackfin: kernel: kgdb: Remove unused functionRickard Strandqvist
Remove the function kgdb_post_primary_code() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Acked-by: Sonic Zhang <sonic.zhang@analog.com>
2015-04-23s390/zcrypt: Introduce new SHA-512 based Pseudo Random Generator.Harald Freudenberger
Rework of the prandom device with introduction of a new SHA-512 based NIST SP 800-90 conform deterministic random bit generator. Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-04-23s390/mm: change swap pte encoding and pgtable cleanupMartin Schwidefsky
After the file ptes have been removed the bit combination used to encode non-linear mappings can be reused for the swap ptes. This frees up a precious pte software bit. Reflect the change in the swap encoding in the comments and do some cleanup while we are at it. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-04-23s390/mm: correct transfer of dirty & young bits in __pmd_to_pteMartin Schwidefsky
The dirty & young bit from the pmd is not copied correctly to the pseudo pte in __pmd_to_pte. In fact it is not copied at all, the bits get lost. As the old style huge page currently does not need the dirty & young information this has no effect, but may be needed in the future. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-04-23s390/bpf: add dependency to z196 featuresHeiko Carstens
The new ebpf code uses e.g. the laal instruction which is part of the interlocked-access facility 1 which again was introduced with z196. So we must make sure the ebpf code generator depends on MARCH_Z196_FEATURES. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2015-04-23s390/kvm: remove delayed reallocation of page tables for KVMMartin Schwidefsky
Replacing a 2K page table with a 4K page table while a VMA is active for the affected memory region is fundamentally broken. Rip out the page table reallocation code and replace it with a simple system control 'vm.allocate_pgste'. If the system control is set the page tables for all processes are allocated as full 4K pages, even for processes that do not need it. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-04-23kexec: allocate the kexec control page with KEXEC_CONTROL_MEMORY_GFPMartin Schwidefsky
Introduce KEXEC_CONTROL_MEMORY_GFP to allow the architecture code to override the gfp flags of the allocation for the kexec control page. The loop in kimage_alloc_normal_control_pages allocates pages with GFP_KERNEL until a page is found that happens to have an address smaller than the KEXEC_CONTROL_MEMORY_LIMIT. On systems with a large memory size but a small KEXEC_CONTROL_MEMORY_LIMIT the loop will keep allocating memory until the oom killer steps in. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-04-23dma: fix build error after update to v3.19Steven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com>