aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/radeon/evergreen.c
AgeCommit message (Collapse)Author
2013-11-08Merge tag 'drm-intel-fixes-2013-11-07' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-next Bit a bit -fixes pull request in the merge window than usual dua to two feauture-y things: - Display CRCs are now enabled on all platforms, including the odd DP case on gm45/vlv. Since this is a testing-only feature it should ever hurt, but I figured it'll help with regression-testing -fixes. So I left it in and didn't postpone it to 3.14. - Display power well refactoring from Imre. Would have caused major pain conflict with the bdw stage 1 patches if I'd postpone this to -next. It's only an relatively small interface rework, so shouldn't cause pain. It's also been in my tree since almost 3 weeks already. That accounts for about two thirds of the pull, otherwise just bugfixes: - vlv backlight fix from Jesse/Jani - vlv vblank timestamp fix from Jesse - improved edp detection through vbt from Ville (fixes a vlv issue) - eDP vdd fix from Paulo - fixes for dvo lvds on i830M - a few smaller things all over Note: This contains a backmerge of v3.12. Since the -internal branch always applied on top of -nightly I need that unified base to merge bdw patches. So you'll get a conflict with radeon connector props when pulling this (and nouveau/master will also conflict a bit when Ben doesn't rebase). The backmerge itself only had conflicts in drm/i915. There's also a tiny conflict between Jani's backlight fix and your sysfs lifetime fix in drm-next. * tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits) drm/i915/vlv: use per-pipe backlight controls v2 drm/i915: make backlight functions take a connector drm/i915: move opregion asle request handling to a work queue drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV drm/i915: Make intel_dp_is_edp() less specific drm/i915: Give names to the VBT child device type bits drm/i915/vlv: enable HDA display audio for Valleyview2 drm/i915/dvo: call ->mode_set callback only when the port is running drm/i915: avoid unclaimed registers when capturing the error state drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv drm/i915: scramble reset support for DP port CRC on vlv drm/i915: scramble reset support for DP port CRC on g4x drm/i916: add "auto" pipe CRC source ... Conflicts: MAINTAINERS drivers/gpu/drm/i915/intel_panel.c drivers/gpu/drm/nouveau/core/subdev/mc/base.c drivers/gpu/drm/radeon/atombios_encoders.c drivers/gpu/drm/radeon/radeon_connectors.c
2013-11-01drm/radeon: fix endian handling in rlc buffer setupAlex Deucher
The buffers needs to be in little endian format. Noticed-by: Sylvain BERTRAND <sylware@legeek.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01drm/radeon: add a connector property for ditherAlex Deucher
Allows you to enable dither in the display hardware when the monitor supports lower a lower bpc than the current framebuffer format. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-11-01drm/radeon: Add support for programming the FMT blocksAlex Deucher
The FMT blocks control how data is sent from the backend of the display pipe to to monitor. Proper set up of the FMT blocks are required for 30bpp formats. Additionally, dithering can be enabled on for better display with 18 and 24bpp displays. The exception is LVDS/eDP which atom takes care of in the SelectCRTC_Source table. For now just enable truncation until we test dithering more. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-09drm/radeon: fix hw contexts for SUMO2 asicswojciech kapuscinski
They have 4 rather than 8. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=63599 Signed-off-by: wojciech kapuscinski <wojtask9@wp.pl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-09-02Merge branch 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Alex writes: This is the radeon drm-next request. Big changes include: - support for dpm on CIK parts - support for ASPM on CIK parts - support for berlin GPUs - major ring handling cleanup - remove the old 3D blit code for bo moves in favor of CP DMA or sDMA - lots of bug fixes [airlied: fix up a bunch of conflicts from drm_order removal] * 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits) drm/radeon/dpm: make sure dc performance level limits are valid (CI) drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2) drm/radeon: gcc fixes for extended dpm tables drm/radeon: gcc fixes for kb/kv dpm drm/radeon: gcc fixes for ci dpm drm/radeon: gcc fixes for si dpm drm/radeon: gcc fixes for ni dpm drm/radeon: gcc fixes for trinity dpm drm/radeon: gcc fixes for sumo dpm drm/radeonn: gcc fixes for rv7xx/eg/btc dpm drm/radeon: gcc fixes for rv6xx dpm drm/radeon: gcc fixes for radeon_atombios.c drm/radeon: enable UVD interrupts on CIK drm/radeon: fix init ordering for r600+ drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume radeon kms: fix uninitialised hotplug work usage in r100_irq_process() drm/radeon/audio: set up the sads on DCE3.2 asics drm/radeon: fix handling of variable sized arrays for router objects ... Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/i915/i915_gem_dmabuf.c drivers/gpu/drm/i915/intel_pm.c drivers/gpu/drm/radeon/cik.c drivers/gpu/drm/radeon/ni.c drivers/gpu/drm/radeon/r600.c
2013-08-30drm/radeon: fix init ordering for r600+Alex Deucher
The vram scratch buffer needs to be initialized before the mc is programmed otherwise we program 0 as the GPU address of the default GPU fault page. In most cases we put vram at zero anyway and reserve a page for the legacy vga buffer so in practice this shouldn't cause any problems, but better to make it correct. Was changed in: 6fab3febf6d949b0a12b1e4e73db38e4a177a79e Reported-by: FrankR Huang <FrankR.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon: update line buffer allocation for dce4.1/5Alex Deucher
We need to allocate line buffer to each display when setting up the watermarks. Failure to do so can lead to a blank screen. This fixes blank screen problems on dce4.1/5 asics. Based on an initial fix from: Jay Cornwall <jay.cornwall@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon/cik: properly set up the clearstate buffer for pg (v2)Alex Deucher
The format of the clearstate buffer used for pg (powergating) changed between NI and SI. This formats it properly for what the hardware expects on SI+. v2: fix addresses Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon/si: properly set up the clearstate buffer for pg (v2)Alex Deucher
The format of the clearstate buffer used for pg (powergating) changed between NI and SI. This formats it properly for what the hardware expects on SI. v2: fix addresses Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: separate DMA codeChristian König
Similar to separating the UVD code, just put the DMA functions into separate files. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: separate UVD code v3Christian König
Our different hardware blocks are actually completely separated, so it doesn't make much sense any more to structure the code by pure chipset generations. Start restructuring the code by separating our the UVD block. v2: updated commit message v3: rebased and restructurized start/stop functions for kv dpm. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: remove special handling for the DMA ringChristian König
Now that we have callbacks for [rw]ptr handling we can remove the special handling for the DMA rings and use the callbacks instead. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: rework UVD writeback & [rw]ptr handlingChristian König
The hardware just doesn't support this correctly. Disable it before we accidentally write anywhere we shouldn't. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: restructure UVD code to handle UVD PG (v2)Alex Deucher
When we PG (powergate) UVD, we need to re-initialize it before we can use it again. v2: rebase on UVD stop fixes Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: implement clock and power gating for CIK (v3)Alex Deucher
Only the APUs support power gating. v2: disable cgcg for now v3: workaround hw issue in mgcg Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: convert SI,CIK to use sumo_rlc functionsAlex Deucher
and remove duplicate si_rlc functions. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: clean up sumo_rlc_init() for code sharingAlex Deucher
This will eventually be shared with newer asics to reduce code duplication. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon/kms: remove r6xx+ blit copy routinesAlex Deucher
No longer used now that we use the async dma engines or CP DMA for bo copies. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon: always program the MC on startupAlex Deucher
For r6xx+ asics. This mirrors the behavior of pre-r6xx asics. We need to program the MC even if something else in startup() fails. Failure to do so results in an unusable GPU. Based on a fix from: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-07drm/radeon: fix halting UVDChristian König
Removing the clock/power or resetting the VCPU can cause hangs if that happens in the middle of a register write. Stall the memory and register bus before putting the VCPU into reset. Keep it in reset when unloading the module or suspending. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-23drm/radeon: s/drm_order/order_base_2/Daniel Vetter
Last driver and pretty obviously a major user of this little function. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-17drm/radeon: add a module parameter to disable aspmAlex Deucher
Can cause hangs when enabled in certain motherboards. Set radeon.aspm=0 to disable aspm. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-14drm/radeon: add fault decode function for cayman/TN (v2)Alex Deucher
Helpful for debugging GPUVM errors as we can see what hw block and page generated the fault in the log. v2: simplify fault decoding Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2013-07-05drm/radeon: set default clocks for SI when DPM is disabledAlex Deucher
Fix patching of vddc values for SI and enable manually forcing clocks to default levels as per NI. This improves the out of the box performance with SI asics. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-03drm/radeon/aruba: disable additional rlc featuresAlex Deucher
They cause problems with dynamic clocking. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/dpm: save some display parameters for DPMAlex Deucher
Required for SI. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: enable additional power gating features on trinityAlex Deucher
TN has some additional powergating features beyond what is supported on ON/LN. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: add support for ASPM on evergreen asicsAlex Deucher
Enables PCIE ASPM (Active State Power Management) on evergreen-cayman asics. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for trinity asicsAlex Deucher
This adds dpm support for trinity asics. This includes: - clockgating - powergating - dynamic engine clock scaling - dynamic voltage scaling set radeon.dpm=1 to enable it. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for evergreen (v4)Alex Deucher
This adds dpm support for evergreen asics. This includes: - clockgating - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2 switching (requires additional acpi support) Set radeon.dpm=1 to enable. v2: reduce stack usage, rename ulv struct v3: fix thermal interrupt check notices by Jerome v4: fix state enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: fix up dce4/5 display watermark calc for dpmAlex Deucher
Calculate the low and high watermarks based on the low and high clocks for the current power state. The dynamic pm hw will select the appropriate watermark based on the internal dpm state. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: properly set up the RLC on ON/LN/TN (v3)Alex Deucher
This is required for certain advanced functionality. v2: save/restore list takes dword offsets v3: rebase on gpu reset changes Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: move ucode defines to a separate headerAlex Deucher
Avoids confusion and duplication. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add accessors for RCU indirect spaceAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-03radeon: Fix system hang issue when using KMS with older cardsAdis Hamzić
The current radeon driver initialization routines, when using KMS, are written so that the IRQ installation routine is called before initializing the WB buffer and the CP rings. With some ASICs, though, the IRQ routine tries to access the GFX_INDEX ring causing a call to RREG32 with the value of -1 in radeon_fence_read. This, in turn causes the system to completely hang with some cards, requiring a hard reset. A call stack that can cause such a hang looks like this (using rv515 ASIC for the example here): * rv515_init (rv515.c) * radeon_irq_kms_init (radeon_irq_kms.c) * drm_irq_install (drm_irq.c) * radeon_driver_irq_preinstall_kms (radeon_irq_kms.c) * rs600_irq_process (rs600.c) * radeon_fence_process - due to SW interrupt (radeon_fence.c) * radeon_fence_read (radeon_fence.c) * hang due to RREG32(-1) The patch moves the IRQ installation to the card startup routine, after the ring has been initialized, but before the IRQ has been set. This fixes the issue, but requires a check to see if the IRQ is already installed, as is the case in the system resume codepath. I have tested the patch on three machines using the rv515, the rv770 and the evergreen ASIC. They worked without issues. This seems to be a known issue and has been reported on several bug tracking sites by various distributions (see links below). Most of reports recommend booting the system with KMS disabled and then enabling KMS by reloading the radeon module. For some reason, this was indeed a usable workaround, however, UMS is now deprecated and disabled by default. Bug reports: https://bugzilla.redhat.com/show_bug.cgi?id=845745 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/561789 https://bbs.archlinux.org/viewtopic.php?id=156964 Signed-off-by: Adis Hamzić <adis@hamzadis.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-05-29radeon: use max_bus_speed to activate gen2 speedsKleber Sacilotto de Souza
radeon currently uses a drm function to get the speed capabilities for the bus, drm_pcie_get_speed_cap_mask. However, this is a non-standard method of performing this detection and this patch changes it to use the max_bus_speed attribute. From: Lucas Kannebley Tavares <lucaskt@linux.vnet.ibm.com> Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-05-20drm/radeon: don't touch DCE or VGA regs on Hainan (v3)Alex Deucher
Hainan has no display hardware: - no DCE (crtc, uniphy, dac, etc.) - no VGA v2: fix bios fetch v3: fix interrupts Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2013-05-20drm/radeon: Fix VRAM size calculation for VRAM >= 4GBNiels Ole Salscheider
Add ULL prefix to avoid overflow. Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-05-02drm/radeon: consolidate UVD clock programmingChristian König
Instead of duplicating the code over and over again, just use a single function to handle the clock calculations. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-23drm/radeon/evergreen: add support for golden register initAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-22drm/radeon: put UVD PLLs in bypass modeChristian König
Just power down the PLL when we get a VCLK or DCLK of zero. Enabling the bypass mode early should also allow us to switch UVD clocks on the fly. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-22drm/radeon: disable the crtcs in mc_stop (evergreen+) (v2)Alex Deucher
Just disabling the mem requests should be enough, but that doesn't seem to work correctly on efi systems. May fix: https://bugs.freedesktop.org/show_bug.cgi?id=57567 https://bugs.freedesktop.org/show_bug.cgi?id=43655 https://bugzilla.kernel.org/show_bug.cgi?id=56441 v2: blank displays first, then disable. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-04-22drm/radeon: properly lock disp in mc_stop/resume for evergreen+Alex Deucher
Need to wait for the new addresses to take affect before re-enabling the MC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-04-22drm/radeon: update wait_for_vblank for evergreen+Alex Deucher
Properly wait for the next vblank region. The previous code didn't always wait long enough depending on the timing. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-04-15drm/radeon/evergreen+: don't enable HPD interrupts on eDP/LVDSAlex Deucher
Avoids potential interrupt storms when the display is disabled. May fix: https://bugzilla.kernel.org/show_bug.cgi?id=56041 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-04-11drm/radeon: handle broken disabled rb mask gracefullyAlex Deucher
If the disabled rb mask register is not properly initialized program a sane default based on the number of RBs for the asic. This avoids a potential divide by 0 when calculating the backend mask. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-09drm/radeon/kms: replace *REG32_PCIE_P with *REG32_PCIE_PORTAlex Deucher
Avoid confusion with the *REG32_P mask macro. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-09drm/radeon: add UVD tiling addr config v2Christian König
v2: set UVD tiling config for rv730 Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2013-04-09drm/radeon: add set_uvd_clocks callback for evergreenAlex Deucher
v2: remove unneeded register definitions Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-18 05:59:26 +0000