aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath
AgeCommit message (Collapse)Author
2011-05-24Merge ↵John W. Linville
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-05-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) b43: fix comment typo reqest -> request Haavard Skinnemoen has left Atmel cris: typo in mach-fs Makefile Kconfig: fix copy/paste-ism for dell-wmi-aio driver doc: timers-howto: fix a typo ("unsgined") perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course'). treewide: fix a few typos in comments regulator: change debug statement be consistent with the style of the rest Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations" audit: acquire creds selectively to reduce atomic op overhead rtlwifi: don't touch with treewide double semicolon removal treewide: cleanup continuations and remove logging message whitespace ath9k_hw: don't touch with treewide double semicolon removal include/linux/leds-regulator.h: fix syntax in example code tty: fix typo in descripton of tty_termios_encode_baud_rate xtensa: remove obsolete BKL kernel option from defconfig m68k: fix comment typo 'occcured' arch:Kconfig.locks Remove unused config option. treewide: remove extra semicolons ...
2011-05-19ath9k: use PS wakeup before REG_READMohammed Shafi Shajakhan
otherwise we will get deadbeef when the station is in idle state Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: implement .tx_last_beacon()Felix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: fix ad-hoc nexttbtt calculationFelix Fietkau
rounding up the delta between last-beacon-tsf and tsf to intval is wrong and can lead to misconfigured timers which breaks beacon transmission. Fix this by adding intval and subtracting the offset of the tsf within the current slot. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: Drag the driver to the year 2011Sujith Manoharan
The Times They Are a-Changin'. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath_hw: Fix bssid mask documentationMohammed Shafi Shajakhan
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix packet timeoutSujith Manoharan
The WMI tx status event timeout was not aligning with the TX cleanup timer threshold value. Fix this to handle dropped packets. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Change credit limit for UB94/95Sujith Manoharan
Reduce the credit size for UB94/95 to fix target hangs. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix max subframe handlingSujith Manoharan
Commit "ath9k_htc: Fix AMPDU subframe handling" registered the maximum subframe limit of the driver with mac80211, which was used in ADDBA negotiation. While technically correct, this causes inter-operability issues with a few APs. Revert to the older behavior to fix this. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix BSSID calculationSujith Manoharan
The BSSID/AID has to be set for the first associated station interface. Subsequent interfaces may move out of assoc/disassoc status, in which case, the BSSID has to be re-calculated from the available interfaces. Also, ANI should be enabled or disabled based on the current opmode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix RX filter calculationSujith Manoharan
Choose the MY_BEACON filter only in case of a single interface. Also, set the ATH9K_RX_FILTER_MCAST_BCAST_ALL filter in case of interfaces. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Recalculate the BSSID mask on interfaceSujith Manoharan
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix station flagsSujith Manoharan
The FW does absolutely nothing with the station flags, so remove them. But keep the field around since it might come in handy in the future. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix mode selectionSujith Manoharan
Remove all the unsupported modes like FH, TURBO etc. Since this requires a FW update, increase the fw version to 1.3 Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: fix ad-hoc mode beacon selectionFelix Fietkau
In ad-hoc mode, beacon timers are configured differently compared to AP mode, and (depending on the scenario) can vary enough to make the beacon tasklet not detect slot 0 based on the TSF. Since staggered beacons are not (and cannot be) used in ad-hoc mode, it makes more sense to just hardcode slot 0 here, avoiding unnecessary TSF reads and calculations. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: Fix power save wrappers in debug opsRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-17Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/vmxnet3/vmxnet3_ethtool.c net/core/dev.c
2011-05-16Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-tx.c net/mac80211/sta_info.h
2011-05-16carl9170: advertise interface combinationsChristian Lamparter
In order to provide multiple interfaces for a single device, the driver will be required to advertise all possible interface configurations to the stack. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k: make npending frames check as boolMohammed Shafi Shajakhan
we are not doing anything by tracking the number of pending frames. bail out when we first find a pending frame in any one of the 10 queues. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k: make sure main_rssi is positiveMohammed Shafi Shajakhan
some times the rssi control descriptor for the main antenna may be negative like that of alternate antenna, hence before incrementing packet counts/rssi of main/alternate antenna make sure both main_rssi and alt_rssi are positive only. this avoids wrong selection of antenna due to diversity Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k: configure fast_div_bias based on diversity groupMohammed Shafi Shajakhan
configure fast diversity bias based on the antenna diversity group and based on main/alt LNA configurations. also configure main antenna and alternate antenna to gain-table 0 for diversity group 2(AR9485) Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k: Implement an API to swap main/ALT LNA'sMohammed Shafi Shajakhan
for the diversity group 2(AR9485) we swap the LNA's of main/ALT antenna based on alternate antenna's rssi average in comparision with main antenna's rssi, while for AR9285(antenna diversity group 0)we still follow the older method of looking at the packet count in alternate antenna Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k_hw: define antenna diversity groupMohammed Shafi Shajakhan
AR9285 belongs to diversity group 0 and AR9485 belongs to diversity group 2. Based on the diversity group we configure certain antenna diversity paramaters such as lna1_lna2_delta and fast diversity bias values. For AR9485 we have some gain table parameter which selects the gain table 0/1 for main and alternate antenna Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k_hw: define modules to get/set Antenna diversity paramatersMohammed Shafi Shajakhan
these are the two important modules that will be called by the antenna diversity algorithm module in the rx. this will continuosly configure the hardware based on the current diversity status obtained from the algorithm Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k_hw: config diversity based on eeprom contentsMohammed Shafi Shajakhan
* enable LNA-diversity, fast-diversity for AR9485 based on the value read from EEPROM content * if antenna diversity/combining is supported, set LNA1 for the main antenna and LNA2 for the alternate antenna based on the new diversity algorithm Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Cc: Luis Rodriguez <Luis.Rodriguez@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k_hw: define registers/macros to support Antenna diversityMohammed Shafi Shajakhan
define few registers and macros to configure/enable Antenna diversity parameters in AR9485 Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k_hw: enable Antenna diversity for AR9485Mohammed Shafi Shajakhan
read antenna diversity and combining information from the EEPROM. Enable antenna diversity/combining feature only when both LNA diversity and fast diversity are supported Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Tested-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16ath9k_hw: make antenna diversity modules chip specificMohammed Shafi Shajakhan
this is necessary to support Antenna diversity and combining in new chip sets such as AR9485, previously Antenna diversity support is available only in AR9285 Cc: Gabriel Tseng <Gabriel.Tseng@Atheros.com> Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-12ath9k_hw: Fix STA connection issues with AR9380 (XB113).Senthil Balasubramanian
XB113 (AR9380) 3x3 SB 5G only cards were failing to connect to APs due to incorrect xpabiaslevel configuration. fix it. Cc: stable@kernel.org Cc: Ray Li <ray.li@greenwavereality.com> Cc: Kathy Giori <kathy.giori@atheros.com> Cc: Aeolus Yang <aeolus.yang@atheros.com> Cc: compat@orbit-lab.org Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-12ath9k_hw: fix dual band assumption for XB113Luis R. Rodriguez
The XB113 cards are single band, 5 GHz-only, but the default settings were configured to assume it was dual band. Users of these cards then would see 2.4 GHz channels but you would never get any scan results from these channels given that the radio is not present. Cc: stable@kernel.org Cc: Fiona Cain <Fiona.Cain@atheros.com> Cc: Ray Li <ray.li@greenwavereality.com> Cc: Kathy Giori <kathy.giori@atheros.com> Cc: Aeolus Yang <aeolus.yang@atheros.com> Cc: Dan Friedman <dan.friedman@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-05-11ath9k: fix a regression in PS frame filter handlingFelix Fietkau
Only leave filtering enabled for AP or VLAN interfaces, clear the destination mask for all other interfaces. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11ath5k: Fix lockup due to un-init spinlock.Ben Greear
This was introduced in 2.6.39-rc1 it seems. Signed-off-by: Ben Greear <greearb@candelatech.com> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11ath9k: fix beaconing for mesh interfacesJavier Cardona
Mesh beaconing on ath9k was broken by this commit: commit 4801416c76a3a355076d6d371c00270dfe332e1c Author: Ben Greear <greearb@candelatech.com> Date: Sat Jan 15 19:13:48 2011 +0000 This patch assigns the right opmode when the device is used in mesh mode. Reported-by: Fabrice Deyber fabricedeyber@agilemesh.com Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k: Failed to set default beacon rssi in AP/IBSS modeRajkumar Manoharan
This beacon rssi will be used to set noisefloor during ani reset. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k: Fix rssi update in ad-hoc modeRajkumar Manoharan
The average beacon rssi which will be used by ani is not updated in adhoc mode. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k_hw: Change DCU backoff thresh for AR9340Rajkumar Manoharan
By changing DCU backoff threshold for AR9340 to 1, helps to reduce rx overrurns seen while running bidirectional traffic. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k_hw: Corrected xpabiaslevel register settings for AR9340Rajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k_hw: remove get_channel_noise functionMohammed Shafi Shajakhan
currently ath9k_hw_getchan_noise is not used anywhere Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10carl9170: fix -Wunused-but-set-variable warningsChristian Lamparter
tx.c: In function ‘carl9170_tx_accounting_free’: tx.c:159:28: warning: variable ‘txinfo’ set but not used tx.c: In function ‘carl9170_tx_status_process_ampdu’: tx.c:383:27: warning: variable ‘ar_info’ set but not used tx.c: In function ‘__carl9170_tx_process_status’: tx.c:626:27: warning: variable ‘arinfo’ set but not used tx.c: In function ‘carl9170_tx_ampdu_queue’: tx.c:1324:15: warning: variable ‘max’ set but not used Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k: process TSF out of range before RXRajkumar Manoharan
Processing TSF out of range before RX helps to update beacon timers so early in the succeeding rx process. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k: avoid enabling interrupts while processing rxRajkumar Manoharan
The assumsion is that while processing ath9k tasklet, interrupts were already disabled and it will be enabled at the completion of ath9k tasklet. But whenever TSFOOR is raised, the driver configures the beacon timers after having received a beacon frame from the AP which inturn enables the interrupts. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10ath9k: Fix a warning due to a queued work during S3 stateMohammed Shafi Shajakhan
during suspend/S3 state drv_flush is called from mac80211 irrespective of interface count. In ath9k we queue a work in ath9k_flush which we expect to be cancelled in the drv_stop call back. during suspend process mac80211 calls drv_stop only when the interface count(local->count) is non-zero. unfortunately when the network manager is enabled, drv_flush is called while drv_stop is not called as local->count reaches '0'. So fix this by simply checking for the device presence in the drv_flush call back in the driver before queueing work or anything else. this patch fixes the following WARNING Call Trace: [<c014c6e2>] warn_slowpath_common+0x72/0xa0 [<fc133f99>] ? ieee80211_can_queue_work+0x39/0x50 [mac80211] [<fc133f99>] ? ieee80211_can_queue_work+0x39/0x50 [mac80211] [<c014c75b>] warn_slowpath_fmt+0x2b/0x30 [<fc133f99>] ieee80211_can_queue_work+0x39/0x50 [mac80211] [<fc134ed1>] ieee80211_queue_delayed_work+0x21/0x50 [mac80211] [<fc1e5b22>] ath_tx_complete_poll_work+0xb2/0x100 [ath9k] [<c016399e>] run_workqueue+0x8e/0x150 [<fc1e5a70>] ? ath_tx_complete_poll_work+0x0/0x100 [ath9k] [<c0163ae4>] worker_thread+0x84/0xe0 [<c0167a60>] ? autoremove_wake_function+0x0/0x50 [<c0163a60>] ? worker_thread+0x0/0xe0 [<c01677d4>] kthread+0x74/0x80 [<c0167760>] ? kthread+0x0/0x80 [<c0104087>] kernel_thread_helper+0x7/0x10 ---[ end trace 2aff81010df9215b ]--- Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-10treewide: fix a few typos in commentsJustin P. Mattock
- kenrel -> kernel - whetehr -> whether - ttt -> tt - sss -> ss Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-05ath9k_hw: fix power for the HT40 duplicate framesLuis R. Rodriguez
With AR9003 at about ~ 10 feet from an AP that uses RTS / CTS you will be able to associate but not not get data through given that the power for the rates used was set too low. This increases the power and permits data connectivity at longer distances from access points when connected with HT40. Without this you will not get any data through when associated to APs configured in HT40 at about more than 10 feet away. Cc: stable@kernel.org Cc: Fiona Cain <fcain@atheros.com> Cc: Zhen Xie <Zhen.Xie@Atheros.com> Cc: Kathy Giori <kathy.giori@atheros.com> Cc: Neha Choksi <neha.choksi@atheros.com> Cc: Wayne Daniel <wayne.daniel@atheros.com> Cc: Gaurav Jauhar <gaurav.jauhar@atheros.com> Cc: Samira Naraghi <samira.naraghi@atheros.com> CC: Ashok Chennupati <ashok.chennupati@atheros.com> Cc: Lance Zimmerman <lance.zimmerman@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05ath9k_hw: do noise floor calibration only on required chainsRajkumar Manoharan
At present the noise floor calibration is processed in supported control and extension chains rather than required chains. Unnccesarily doing nfcal in all supported chains leads to invalid nf readings on extn chains and these invalid values got updated into history buffer. While loading those values from history buffer is moving the chip to deaf state. This issue was observed in AR9002/AR9003 chips while doing associate/dissociate in HT40 mode and interface up/down in iterative manner. After some iterations, the chip was moved to deaf state. Somehow the pci devices are recovered by poll work after chip reset. Raading the nf values in all supported extension chains when the hw is not yet configured in HT40 mode results invalid values. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05carl9170: fix allmulticast modeNicolas Cavallari
Currently, the driver only disable multicast filtering when the FIF_ALLMULTI driver flag has been just set (ie, if changed_flags& FIF_ALLMULTI and *new_flags& FIF_ALLMULTI) or else it will reenable multicast filtering. But next time, this condition will be false and multicast filtering will be reenabled, even through FIF_ALLMULTI is still set. This mean that allmulticast only works for less than two minutes in ad-hoc mode. This patch fixes that to disable multicast filtering as long as FIF_ALLMULTI is set. Signed-off-by: Nicolas Cavallari <cavallar@lri.fr> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05ath9k_hw: remove aggregation protection modeMohammed Shafi Shajakhan
when aggregation protection mode is enabled the hardware needs to send RTS/CTS for each HT frame. Currently its disabled so remove the unused call backs. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-19 10:23:56 +0000