aboutsummaryrefslogtreecommitdiff
path: root/fs/ocfs2/dlm
AgeCommit message (Collapse)Author
2016-04-18ocfs2/dlm: fix BUG in dlm_move_lockres_to_recovery_listJoseph Qi
[ Upstream commit be12b299a83fc807bbaccd2bcb8ec50cbb0cb55c ] When master handles convert request, it queues ast first and then returns status. This may happen that the ast is sent before the request status because the above two messages are sent by two threads. And right after the ast is sent, if master down, it may trigger BUG in dlm_move_lockres_to_recovery_list in the requested node because ast handler moves it to grant list without clear lock->convert_pending. So remove BUG_ON statement and check if the ast is processed in dlmconvert_remote. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reported-by: Yiwen Jiang <jiangyiwen@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Tariq Saeed <tariq.x.saeed@oracle.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-04-18ocfs2/dlm: fix race between convert and recoveryJoseph Qi
[ Upstream commit ac7cf246dfdbec3d8fed296c7bf30e16f5099dac ] There is a race window between dlmconvert_remote and dlm_move_lockres_to_recovery_list, which will cause a lock with OCFS2_LOCK_BUSY in grant list, thus system hangs. dlmconvert_remote { spin_lock(&res->spinlock); list_move_tail(&lock->list, &res->converting); lock->convert_pending = 1; spin_unlock(&res->spinlock); status = dlm_send_remote_convert_request(); >>>>>> race window, master has queued ast and return DLM_NORMAL, and then down before sending ast. this node detects master down and calls dlm_move_lockres_to_recovery_list, which will revert the lock to grant list. Then OCFS2_LOCK_BUSY won't be cleared as new master won't send ast any more because it thinks already be authorized. spin_lock(&res->spinlock); lock->convert_pending = 0; if (status != DLM_NORMAL) dlm_revert_pending_convert(res, lock); spin_unlock(&res->spinlock); } In this case, check if res->state has DLM_LOCK_RES_RECOVERING bit set (res is still in recovering) or res master changed (new master has finished recovery), reset the status to DLM_RECOVERING, then it will retry convert. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reported-by: Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Tariq Saeed <tariq.x.saeed@oracle.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-02-15ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanupxuejiufei
[ Upstream commit c95a51807b730e4681e2ecbdfd669ca52601959e ] When recovery master down, dlm_do_local_recovery_cleanup() only remove the $RECOVERY lock owned by dead node, but do not clear the refmap bit. Which will make umount thread falling in dead loop migrating $RECOVERY to the dead node. Signed-off-by: xuejiufei <xuejiufei@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-02-09ocfs2/dlm: ignore cleaning the migration mle that is inusexuejiufei
[ Upstream commit bef5502de074b6f6fa647b94b73155d675694420 ] We have found that migration source will trigger a BUG that the refcount of mle is already zero before put when the target is down during migration. The situation is as follows: dlm_migrate_lockres dlm_add_migration_mle dlm_mark_lockres_migrating dlm_get_mle_inuse <<<<<< Now the refcount of the mle is 2. dlm_send_one_lockres and wait for the target to become the new master. <<<<<< o2hb detect the target down and clean the migration mle. Now the refcount is 1. dlm_migrate_lockres woken, and put the mle twice when found the target goes down which trigger the BUG with the following message: "ERROR: bad mle: ". Signed-off-by: Jiufei Xue <xuejiufei@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-10-27ocfs2/dlm: fix deadlock when dispatch assert masterJoseph Qi
[ Upstream commit 012572d4fc2e4ddd5c8ec8614d51414ec6cae02a ] The order of the following three spinlocks should be: dlm_domain_lock < dlm_ctxt->spinlock < dlm_lock_resource->spinlock But dlm_dispatch_assert_master() is called while holding dlm_ctxt->spinlock and dlm_lock_resource->spinlock, and then it calls dlm_grab() which will take dlm_domain_lock. Once another thread (for example, dlm_query_join_handler) has already taken dlm_domain_lock, and tries to take dlm_ctxt->spinlock deadlock happens. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: "Junxiao Bi" <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2015-05-23ocfs2: dlm: fix race between purge and get lock resourceJunxiao Bi
[ Upstream commit b1432a2a35565f538586774a03bf277c27fc267d ] There is a race window in dlm_get_lock_resource(), which may return a lock resource which has been purged. This will cause the process to hang forever in dlmlock() as the ast msg can't be handled due to its lock resource not existing. dlm_get_lock_resource { ... spin_lock(&dlm->spinlock); tmpres = __dlm_lookup_lockres_full(dlm, lockid, namelen, hash); if (tmpres) { spin_unlock(&dlm->spinlock); >>>>>>>> race window, dlm_run_purge_list() may run and purge the lock resource spin_lock(&tmpres->spinlock); ... spin_unlock(&tmpres->spinlock); } } Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2014-10-09ocfs2: fix deadlock between o2hb thread and o2net_wqJoseph Qi
The following case may lead to o2net_wq and o2hb thread deadlock on o2hb_callback_sem. Currently there are 2 nodes say N1, N2 in the cluster. And N2 down, at the same time, N3 tries to join the cluster. So N1 will handle node down (N2) and join (N3) simultaneously. o2hb o2net_wq ->o2hb_do_disk_heartbeat ->o2hb_check_slot ->o2hb_run_event_list ->o2hb_fire_callbacks ->down_write(&o2hb_callback_sem) ->o2net_hb_node_down_cb ->flush_workqueue(o2net_wq) ->o2net_process_message ->dlm_query_join_handler ->o2hb_check_node_heartbeating ->o2hb_fill_node_map ->down_read(&o2hb_callback_sem) No need to take o2hb_callback_sem in dlm_query_join_handler, o2hb_live_lock is enough to protect live node map. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: xMark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: jiangyiwen <jiangyiwen@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09fs/ocfs2/dlm/dlmdebug.c: use seq_open_private() not seq_open()Rob Jones
Reduce boilerplate code by using seq_open_private() instead of seq_open() Signed-off-by: Rob Jones <rob.jones@codethink.co.uk> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09ocfs2: remove unused code in dlm_new_lockres()Xue jiufei
Remove the branch that free res->lockname.name because the condition is never satisfied when jump to label error. Signed-off-by: joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09ocfs2/dlm: call dlm_lockres_put without resource spinlockalex chen
dlm_lockres_put() should be called without &res->spinlock, otherwise a deadlock case may happen. spin_lock(&res->spinlock) ... dlm_lockres_put ->dlm_lockres_release ->dlm_print_one_lock_resource ->spin_lock(&res->spinlock) Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09ocfs2/dlm: refactor error handling in dlm_alloc_ctxtJoseph Qi
Refactoring error handling in dlm_alloc_ctxt to simplify code. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Alex Chen <alex.chen@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-02ocfs2/dlm: should put mle when goto kill in dlm_assert_master_handleralex chen
In dlm_assert_master_handler, the mle is get in dlm_find_mle, should be put when goto kill, otherwise, this mle will never be released. Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-26ocfs2/dlm: do not get resource spinlock if lockres is newJoseph Qi
There is a deadlock case which reported by Guozhonghua: https://oss.oracle.com/pipermail/ocfs2-devel/2014-September/010079.html This case is caused by &res->spinlock and &dlm->master_lock misordering in different threads. It was introduced by commit 8d400b81cc83 ("ocfs2/dlm: Clean up refmap helpers"). Since lockres is new, it doesn't not require the &res->spinlock. So remove it. Fixes: 8d400b81cc83 ("ocfs2/dlm: Clean up refmap helpers") Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: joyce.xue <xuejiufei@huawei.com> Reported-by: Guozhonghua <guozhonghua@h3c.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06ocfs2: race between umount and unfinished remastering during recoveryTariq Saeed
Orabug: 19074140 When umount is issued during recovery on the new master that has not finished remastering locks, it triggers BUG() in dlm_send_mig_lockres_msg(). Here is the situation: 1) node A has a lock on resource X mastered by node B. 2) node B dies -> node A sets recovering flag for res X 3) Node C becomes the new master for resources owned by the dead node and is remastering locks of the dead node but has not finished the remastering process yet. 4) umount is issued on node C. 5) During processing of umount, ignoring unfished recovery, node C attempts to migrate resource X to node A. 6) node A finds res X in DLM_LOCK_RES_RECOVERING state, considers it a logic error and sends back -EFAULT. 7) node C asserts BUG() upon seeing EFAULT resp from node B. Fix is to delay migrating res X till remastering is finished at which point recovering flag will be cleared on both A and C. Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06ocfs2: remove conversion of total_backoff in dlm_join_domain()Xue jiufei
The unit of total_backoff is msecs not jiffies, so no need to do the conversion. Otherwise, the join timeout is not 90 sec. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Signed-off-by: joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23ocfs2/dlm: do not purge lockres that is queued for assert masterXue jiufei
When workqueue is delayed, it may occur that a lockres is purged while it is still queued for master assert. it may trigger BUG() as follows. N1 N2 dlm_get_lockres() ->dlm_do_master_requery is the master of lockres, so queue assert_master work dlm_thread() start running and purge the lockres dlm_assert_master_worker() send assert master message to other nodes receiving the assert_master message, set master to N2 dlmlock_remote() send create_lock message to N2, but receive DLM_IVLOCKID, if it is RECOVERY lockres, it triggers the BUG(). Another BUG() is triggered when N3 become the new master and send assert_master to N1, N1 will trigger the BUG() because owner doesn't match. So we should not purge lockres when it is queued for assert master. Signed-off-by: joyce.xue <xuejiufei@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23ocfs2: do not return DLM_MIGRATE_RESPONSE_MASTERY_REF to avoid endless,loop ↵jiangyiwen
during umount The following case may lead to endless loop during umount. node A node B node C node D umount volume, migrate lockres1 to B want to lock lockres1, send MASTER_REQUEST_MSG to C init block mle send MIGRATE_REQUEST_MSG to C find a block mle, and then return DLM_MIGRATE_RESPONSE_MASTERY_REF to B set C in refmap umount successfully try to umount, endless loop occurs when migrate lockres1 since C is in refmap So we can fix this endless loop case by only returning DLM_MIGRATE_RESPONSE_MASTERY_REF if it has a mastery mle when receiving MIGRATE_REQUEST_MSG. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: jiangyiwen <jiangyiwen@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Xue jiufei <xuejiufei@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23ocfs2/dlm: fix misuse of list_move_tail() in dlm_run_purge_list()Xue jiufei
When a lockres in purge list but is still in use, it should be moved to the tail of purge list. dlm_thread will continue to check next lockres in purge list. However, code list_move_tail(&dlm->purge_list, &lockres->purge) will do *no* movements, so dlm_thread will purge the same lockres in this loop again and again. If it is in use for a long time, other lockres will not be processed. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Signed-off-by: joyce.xue <xuejiufei@huawei.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23ocfs2: fix deadlock when two nodes are converting same lock from PR to EX ↵Tariq Saeed
and idletimeout closes conn Orabug: 18639535 Two node cluster and both nodes hold a lock at PR level and both want to convert to EX at the same time. Master node 1 has sent BAST and then closes the connection due to idletime out. Node 0 receives BAST, sends unlock req with cancel flag but gets error -ENOTCONN. The problem is this error is ignored in dlm_send_remote_unlock_request() on the **incorrect** assumption that the master is dead. See NOTE in comment why it returns DLM_NORMAL. Upon getting DLM_NORMAL, node 0 proceeds to sends convert (without cancel flg) which fails with -ENOTCONN. waits 5 sec and resends. This time gets DLM_IVLOCKID from the master since lock not found in grant, it had been moved to converting queue in response to conv PR->EX req. No way out. Node 1 (master) Node 0 ============== ====== lock mode PR PR convert PR -> EX mv grant -> convert and que BAST ... <-------- convert PR -> EX convert que looks like this: ((node 1, PR -> EX) (node 0, PR -> EX)) ... BAST (want PR -> NL) ------------------> ... idle timout, conn closed ... In response to BAST, sends unlock with cancel convert flag gets -ENOTCONN. Ignores and sends remote convert request gets -ENOTCONN, waits 5 Sec, retries ... reconnects <----------------- convert req goes through on next try does not find lock on grant que status DLM_IVLOCKID ------------------> ... No way out. Fix is to keep retrying unlock with cancel flag until it succeeds or the master dies. Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04ocfs2: remove some unused codeXue jiufei
dlm_recovery_ctxt.received is unused. ocfs2_should_refresh_lock_res() can only return 0 or 1, so the error handling code in ocfs2_super_lock() is unneeded. Signed-off-by: joyce.xue <xuejiufei@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04ocfs2/dlm: disallow node joining when recovery is on goingXue jiufei
We found a race situation when dlm recovery and node joining occurs simultaneously if the network state is bad. N1 N4 start joining dlm and send query join to all live nodes set joining node to N1, return OK send query join to other live nodes and it may take a while call dlm_send_join_assert() to send assert join message when N2 is down, so keep trying to send message to N2 until find N2 is down send assert join message to N3, but connection is down with N3, so it may take a while become the recovery master for N2 and send begin reco message to other nodes in domain map but no N1 connection with N3 is rebuild, then send assert join to N4 call dlm_assert_joined_handler(), add N1 to domain_map dlm recovery done, send finalize message to nodes in domain map, including N1 receiving finalize message, trigger the BUG() because recovery master mismatch. Signed-off-by: joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04ocfs2/dlm: fix possible convert=sion deadlockXue jiufei
We found there is a conversion deadlock when the owner of lockres happened to crash before send DLM_PROXY_AST_MSG for a downconverting lock. The situation is as follows: Node1 Node2 Node3 the owner of lockresA lock_1 granted at EX mode and call ocfs2_cluster_unlock to decrease ex_holders. converting lock_3 from NL to EX send DLM_PROXY_AST_MSG to Node1, asking Node 1 to downconvert. receiving DLM_PROXY_AST_MSG, thread ocfs2dc send DLM_CONVERT_LOCK_MSG to Node2 to downconvert lock_1(EX->NL). lock_1 can be granted and put it into pending_asts list, return DLM_NORMAL. then something happened and Node2 crashed. received DLM_NORMAL, waiting for DLM_PROXY_AST_MSG. selected as the recovery master, receving migrate lock from Node1, queue lock_1 to the tail of converting list. After dlm recovery, converting list in the master of lockresA(Node3) will be: converting list head <-> lock_3(NL->EX) <->lock_1(EX<->NL). Requested mode of lock_3 is not compatible with the granted mode of lock_1, so it can not be granted. and lock_1 can not downconvert because covnerting queue is strictly FIFO. So a deadlock is created. We think function dlm_process_recovery_data() should queue_ast for lock_1 or alter the order of lock_1 and lock_3, so dlm_thread can process lock_1 first. And if there are multiple downconverting locks, they must convert form PR to NL, so no need to sort them. Signed-off-by: joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04ocfs2: remove NULL assignments on staticFabian Frederick
Static values are automatically initialized to NULL. Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-23ocfs2: fix double kmem_cache_destroy in dlm_initJoseph Qi
In dlm_init, if create dlm_lockname_cache failed in dlm_init_master_caches, it will destroy dlm_lockres_cache which created before twice. And this will cause system die when loading modules. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03ocfs2: fix deadlock risk when kmalloc failed in dlm_query_region_handlerZhonghua Guo
In dlm_query_region_handler(), once kmalloc failed, it will unlock dlm_domain_lock without lock first, then deadlock happens. Signed-off-by: Zhonghua Guo <guozhonghua@h3c.com> Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Tested-by: Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03ocfs2: dlm: fix recovery hungJunxiao Bi
There is a race window in dlm_do_recovery() between dlm_remaster_locks() and dlm_reset_recovery() when the recovery master nearly finish the recovery process for a dead node. After the master sends FINALIZE_RECO message in dlm_remaster_locks(), another node may become the recovery master for another dead node, and then send the BEGIN_RECO message to all the nodes included the old master, in the handler of this message dlm_begin_reco_handler() of old master, dlm->reco.dead_node and dlm->reco.new_master will be set to the second dead node and the new master, then in dlm_reset_recovery(), these two variables will be reset to default value. This will cause new recovery master can not finish the recovery process and hung, at last the whole cluster will hung for recovery. old recovery master: new recovery master: dlm_remaster_locks() become recovery master for another dead node. dlm_send_begin_reco_message() dlm_begin_reco_handler() { if (dlm->reco.state & DLM_RECO_STATE_FINALIZE) { return -EAGAIN; } dlm_set_reco_master(dlm, br->node_idx); dlm_set_reco_dead_node(dlm, br->dead_node); } dlm_reset_recovery() { dlm_set_reco_dead_node(dlm, O2NM_INVALID_NODE_NUM); dlm_set_reco_master(dlm, O2NM_INVALID_NODE_NUM); } will hang in dlm_remaster_locks() for request dlm locks info Before send FINALIZE_RECO message, recovery master should set DLM_RECO_STATE_FINALIZE for itself and clear it after the recovery done, this can break the race windows as the BEGIN_RECO messages will not be handled before DLM_RECO_STATE_FINALIZE flag is cleared. A similar race may happen between new recovery master and normal node which is in dlm_finalize_reco_handler(), also fix it. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03ocfs2: dlm: fix lock migration crashJunxiao Bi
This issue was introduced by commit 800deef3f6f8 ("ocfs2: use list_for_each_entry where benefical") in 2007 where it replaced list_for_each with list_for_each_entry. The variable "lock" will point to invalid data if "tmpq" list is empty and a panic will be triggered due to this. Sunil advised reverting it back, but the old version was also not right. At the end of the outer for loop, that list_for_each_entry will also set "lock" to an invalid data, then in the next loop, if the "tmpq" list is empty, "lock" will be an stale invalid data and cause the panic. So reverting the list_for_each back and reset "lock" to NULL to fix this issue. Another concern is that this seemes can not happen because the "tmpq" list should not be empty. Let me describe how. old lock resource owner(node 1): migratation target(node 2): image there's lockres with a EX lock from node 2 in granted list, a NR lock from node x with convert_type EX in converting list. dlm_empty_lockres() { dlm_pick_migration_target() { pick node 2 as target as its lock is the first one in granted list. } dlm_migrate_lockres() { dlm_mark_lockres_migrating() { res->state |= DLM_LOCK_RES_BLOCK_DIRTY; wait_event(dlm->ast_wq, !dlm_lockres_is_dirty(dlm, res)); //after the above code, we can not dirty lockres any more, // so dlm_thread shuffle list will not run downconvert lock from EX to NR upconvert lock from NR to EX <<< migration may schedule out here, then <<< node 2 send down convert request to convert type from EX to <<< NR, then send up convert request to convert type from NR to <<< EX, at this time, lockres granted list is empty, and two locks <<< in the converting list, node x up convert lock followed by <<< node 2 up convert lock. // will set lockres RES_MIGRATING flag, the following // lock/unlock can not run dlm_lockres_release_ast(dlm, res); } dlm_send_one_lockres() dlm_process_recovery_data() for (i=0; i<mres->num_locks; i++) if (ml->node == dlm->node_num) for (j = DLM_GRANTED_LIST; j <= DLM_BLOCKED_LIST; j++) { list_for_each_entry(lock, tmpq, list) if (lock) break; <<< lock is invalid as grant list is empty. } if (lock->ml.node != ml->node) BUG() >>> crash here } I see the above locks status from a vmcore of our internal bug. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03ocfs2: fix null pointer dereference when access dlm_state before launching ↵Zongxun Wang
dlm thread When mounting an ocfs2 volume, it will firstly generate a file /sys/kernel/debug/o2dlm/<uuid>/dlm_state, and then launch the dlm thread. So the following situation will cause a null pointer dereference. dlm_debug_init -> access file dlm_state which will call dlm_state_print -> dlm_launch_thread Move dlm_debug_init after dlm_launch_thread and dlm_launch_recovery_thread can fix this issue. Signed-off-by: Zongxun Wang <wangzongxun@huawei.com> Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21ocfs2: remove versioning informationGoldwyn Rodrigues
The versioning information is confusing for end-users. The numbers are stuck at 1.5.0 when the tools version have moved to 1.8.2. Remove the versioning system in the OCFS2 modules and let the kernel version be the guide to debug issues. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Acked-by: Sunil Mushran <sunil.mushran@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: break useless while loopJunxiao Bi
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: delay migration when the lockres is in migration stateXue jiufei
We trigger a bug in __dlm_lockres_reserve_ast() when we parallel umount 4 nodes. The situation is as follows: 1) Node A migrate all lockres it owned(eg. lockres A) to other nodes say node B when it umounts. 2) Receiving MIG_LOCKRES message from A, Node B masters the lockres A with DLM_LOCK_RES_MIGRATING state set. 3) Then we umount ocfs2 on node B. It also should migrate lockres A to another node, say node C. But now, DLM_LOCK_RES_MIGRATING state of lockers A is not cleared. Node B triggered the BUG on lockres with state DLM_LOCK_RES_MIGRATING. Signed-off-by: Xuejiufei <xuejiufei@huawei.com> Signed-off-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Tariq Saeed <tariq.x.saeed@oracle.com> Cc: Srinivas Eeda <srinivas.eeda@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: skip locks in the blocked listXue jiufei
A parallel umount on 4 nodes triggered a bug in dlm_process_recovery_date(). Here's the situation: Receiving MIG_LOCKRES message, A node processes the locks in migratable lockres. It copys lvb from migratable lockres when processing the first valid lock. If there is a lock in the blocked list with the EX level, it triggers the BUG. Since valid lvbs are set when locks are granted with EX or PR levels, locks in the blocked list cannot have valid lvbs. Therefore I think we should skip the locks in the blocked list. Signed-off-by: Xuejiufei <xuejiufei@huawei.com> Signed-off-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11ocfs2/dlm: force clean refmap when doing local cleanupXue jiufei
dlm_do_local_recovery_cleanup() should force clean refmap if the owner of lockres is UNKNOWN. Otherwise node may hang when umounting filesystems. Here's the situation: Node1 Node2 dlmlock() -> dlm_get_lock_resource() send DLM_MASTER_REQUEST_MSG to other nodes. trying to master this lockres, return MAYBE. selected as the master of lockresA, set mle->master to Node1, and do assert_master, send DLM_ASSERT_MASTER_MSG to Node2. Node 2 has interest on lockresA and return DLM_ASSERT_RESPONSE_MASTERY_REF then something happened and Node2 crashed. Receiving DLM_ASSERT_RESPONSE_MASTERY_REF, set Node2 into refmap, and keep sending DLM_ASSERT_MASTER_MSG to other nodes o2hb found node2 down, calling dlm_hb_node_down() --> dlm_do_local_recovery_cleanup() the master of lockresA is still UNKNOWN, no need to call dlm_free_dead_locks(). Set the master of lockresA to Node1, but Node2 stills remains in refmap. When Node1 umount, it found that the refmap of lockresA is not empty and attempted to migrate it to Node2, But Node2 is already down, so umount hang, trying to migrate lockresA again and again. Signed-off-by: joyce <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11ocfs2: use list_for_each_entry() instead of list_for_each()Dong Fang
[dan.carpenter@oracle.com: fix up some NULL dereference bugs] Signed-off-by: Dong Fang <yp.fangdong@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jeff Liu <jeff.liu@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11ocfs2: dlm_request_all_locks() should deal with the status sent from target nodeXue jiufei
dlm_request_all_locks() should deal with the status sent from target node if DLM_LOCK_REQUEST_MSG is sent successfully, or recovery master will fall into endless loop, waiting for other nodes to send locks and DLM_RECO_DATA_DONE_MSG to me. NodeA NodeB selected as recovery master dlm_remaster_locks() ->dlm_request_all_locks() send DLM_LOCK_REQUEST_MSG to nodeA It happened that NodeA cannot alloc memory when it processes this message. dlm_request_all_locks_handler() do not queue dlm_request_all_locks_worker and returns -ENOMEM. It will never send locks and DLM_RECO_DATA_DONE_MSG to NodeB. NodeB do not deal with the status sent from nodeA, and will fall in endless loop waiting for the recovery state of NodeA to be changed. Signed-off-by: joyce <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Jeff Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: dlmlock_master() should return DLM_NORMAL after adding lock to ↵Xue jiufei
blocked list dlmlock_master() returns DLM_RECOVERING/DLM_MIGRATING/ DLM_FORWAR after adding lock to blocked list if lockres has the state DLM_LOCK_RES_RECOVERING/DLM_LOCK_RES_MIGRATING/ DLM_LOCK_RES_IN_PROGRESS. so it will retry in dlmlock(). And this may cause dlm_thread fall into an infinite loop Thread1 dlm_thread calls dlm_lock->dlmlock_master, if lockresA is in state DLM_LOCK_RES_RECOVERING, calls __dlm_wait_on_lockres() and waits until others threads clear this state; If cannot grant this lock, adding lock to blocked list, and return DLM_RECOVERING; Grant this lock and move it to grant list; After a while, retry and calls list_add_tail(), adding lock to blocked list again. Granted and blocked list of this lockres will become the following conditions: lock_res->granted.next = dlm_lock->list_head; lock_res->blocked.next = dlm_lock->list_head; dlm_lock->list_head.next = dlm_lock_resource->blocked; When dlm_thread traverses the granted list, it will fall into an endless loop, checking dlm_lock.list_head, dlm_lock->list_head.next (i.e.lock_res->blocked), lock_res->blocked.next(i.e.dlm_lock.list_head again) ..... Signed-off-by: joyce <xuejiufei@huawei.com> Reviewed-by: jensen <shencanquan@huawei.com> Cc: Jeff Liu <jeff.liu@oracle.com> Acked-by: Sunil Mushran <sunil.mushran@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: add missing dlm_put() in dlm_begin_reco_handler()Xue jiufei
dlm_begin_reco_handler() returns without putting dlm when dlm recovery state is DLM_RECO_STATE_FINALIZE. Signed-off-by: joyce <xuejiufei@huawei.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/ocfs2/dlm/dlmrecovery.c:dlm_request_all_locks(): ret should be int ↵Joseph Qi
instead of enum In dlm_request_all_locks, ret is type enum. But o2net_send_message returns a type int value. Then it will never run into the following error branch. So we should change the ret type from enum to int. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Sunil Mushran <sunil.mushran@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/ocfs2/dlm/dlmrecovery.c: remove duplicate declarationsJoseph Qi
Below 3 functions have already been declared in dlmcommon.h, so we have no need to declare them again in dlmrecovery.c: dlm_complete_recovery_thread dlm_launch_recovery_thread dlm_kick_recovery_thread Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Sunil Mushran <sunil.mushran@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12ocfs2: add missing lockres put in dlm_mig_lockres_handlerXue jiufei
dlm_mig_lockres_handler() is missing a dlm_lockres_put() on an error path. Signed-off-by: joyce <xuejiufei@huawei.com> Reviewed-by: shencanquan <shencanquan@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29ocfs2/dlm: remove redundant null pointer checkSachin Kamat
kfree on a NULL pointer is a no-op. Remove the redundant null pointer check. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-26ocfs2/dlm: use GFP_ATOMIC inside a spin_lockDan Carpenter
My static checker complains that this is called with a spin_lock held in dlm_master_requery_handler() from dlmrecovery.c. Probably the reason we have not received any bug reports about this is that recovery is not a common operation. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-21ocfs2: remove kfree() redundant null checksTim Gardner
smatch analysis indicates a number of redundant NULL checks before calling kfree(), eg: fs/ocfs2/alloc.c:6138 ocfs2_begin_truncate_log_recovery() info: redundant null check on *tl_copy calling kfree() fs/ocfs2/alloc.c:6755 ocfs2_zero_range_for_truncate() info: redundant null check on pages calling kfree() etc.... [akpm@linux-foundation.org: revert dubious change in ocfs2_begin_truncate_log_recovery()] Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29ocfs2: trivial endianness misannotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-12-01Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (31 commits) ocfs2: avoid unaligned access to dqc_bitmap ocfs2: Use filemap_write_and_wait() instead of write_inode_now() ocfs2: honor O_(D)SYNC flag in fallocate ocfs2: Add a missing journal credit in ocfs2_link_credits() -v2 ocfs2: send correct UUID to cleancache initialization ocfs2: Commit transactions in error cases -v2 ocfs2: make direntry invalid when deleting it fs/ocfs2/dlm/dlmlock.c: free kmem_cache_zalloc'd data using kmem_cache_free ocfs2: Avoid livelock in ocfs2_readpage() ocfs2: serialize unaligned aio ocfs2: Implement llseek() ocfs2: Fix ocfs2_page_mkwrite() ocfs2: Add comment about orphan scanning ocfs2: Clean up messages in the fs ocfs2/cluster: Cluster up now includes network connections too ocfs2/cluster: Add new function o2net_fill_node_map() ocfs2/cluster: Fix output in file elapsed_time_in_ms ocfs2/dlm: dlmlock_remote() needs to account for remastery ocfs2/dlm: Take inflight reference count for remotely mastered resources too ocfs2/dlm: Cleanup dlm_wait_for_node_death() and dlm_wait_for_node_recovery() ...
2011-11-17fs/ocfs2/dlm/dlmlock.c: free kmem_cache_zalloc'd data using kmem_cache_freeJulia Lawall
Memory allocated using kmem_cache_zalloc should be freed using kmem_cache_free, not kfree. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,e,e1,e2; @@ x = kmem_cache_zalloc(e1,e2) ... when != x = e ?-kfree(x) +kmem_cache_free(e1,x) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-10-31fs: add export.h to files using EXPORT_SYMBOL/THIS_MODULE macrosPaul Gortmaker
These files were getting <linux/module.h> via an implicit include path, but we want to crush those out of existence since they cost time during compiles of processing thousands of lines of headers for no reason. Give them the lightweight header that just contains the EXPORT_SYMBOL infrastructure. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-24ocfs2/cluster: Cluster up now includes network connections tooSunil Mushran
The cluster up check only checks to see if the node is heartbeating or not. If yes it continues assuming that the node is connected to all the nodes. But if that is not the case, the cluster join aborts with a stack of errors that are not easy to comprehend. This patch adds the network connect check upfront and prints the nodes that the node is not yet connected to, before aborting. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-04 13:21:12 +0000