aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2014-01-15netfilter: nf_nat: fix access to uninitialized buffer in IRC NAT helperDaniel Borkmann
commit 2690d97ade05c5325cbf7c72b94b90d265659886 upstream. Commit 5901b6be885e attempted to introduce IPv6 support into IRC NAT helper. By doing so, the following code seemed to be removed by accident: ip = ntohl(exp->master->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip); sprintf(buffer, "%u %u", ip, port); pr_debug("nf_nat_irc: inserting '%s' == %pI4, port %u\n", buffer, &ip, port); This leads to the fact that buffer[] was left uninitialized and contained some stack value. When we call nf_nat_mangle_tcp_packet(), we call strlen(buffer) on excatly this uninitialized buffer. If we are unlucky and the skb has enough tailroom, we overwrite resp. leak contents with values that sit on our stack into the packet and send that out to the receiver. Since the rather informal DCC spec [1] does not seem to specify IPv6 support right now, we log such occurences so that admins can act accordingly, and drop the packet. I've looked into XChat source, and IPv6 is not supported there: addresses are in u32 and print via %u format string. Therefore, restore old behaviour as in IPv4, use snprintf(). The IRC helper does not support IPv6 by now. By this, we can safely use strlen(buffer) in nf_nat_mangle_tcp_packet() and prevent a buffer overflow. Also simplify some code as we now have ct variable anyway. [1] http://www.irchelp.org/irchelp/rfc/ctcpspec.html Fixes: 5901b6be885e ("netfilter: nf_nat: support IPv6 in IRC NAT helper") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15netfilter: fix wrong byte order in nf_ct_seqadj_set internal informationPhil Oester
commit 23dfe136e2bf8d9ea1095704c535368a9bc721da upstream. In commit 41d73ec053d2, sequence number adjustments were moved to a separate file. Unfortunately, the sequence numbers that are stored in the nf_ct_seqadj structure are expressed in host byte order. The necessary ntohl call was removed when the call to adjust_tcp_sequence was collapsed into nf_ct_seqadj_set. This broke the FTP NAT helper. Fix it by adding back the byte order conversions. Reported-by: Dawid Stawiarski <dawid.stawiarski@netart.pl> Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15mac80211: move "bufferable MMPDU" check to fix AP mode scanFelix Fietkau
commit 277d916fc2e959c3f106904116bb4f7b1148d47a upstream. The check needs to apply to both multicast and unicast packets, otherwise probe requests on AP mode scans are sent through the multicast buffer queue, which adds long delays (often longer than the scanning interval). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15bridge: use spin_lock_bh() in br_multicast_set_hash_maxCurt Brune
[ Upstream commit fe0d692bbc645786bce1a98439e548ae619269f5 ] br_multicast_set_hash_max() is called from process context in net/bridge/br_sysfs_br.c by the sysfs store_hash_max() function. br_multicast_set_hash_max() calls spin_lock(&br->multicast_lock), which can deadlock the CPU if a softirq that also tries to take the same lock interrupts br_multicast_set_hash_max() while the lock is held . This can happen quite easily when any of the bridge multicast timers expire, which try to take the same lock. The fix here is to use spin_lock_bh(), preventing other softirqs from executing on this CPU. Steps to reproduce: 1. Create a bridge with several interfaces (I used 4). 2. Set the "multicast query interval" to a low number, like 2. 3. Enable the bridge as a multicast querier. 4. Repeatedly set the bridge hash_max parameter via sysfs. # brctl addbr br0 # brctl addif br0 eth1 eth2 eth3 eth4 # brctl setmcqi br0 2 # brctl setmcquerier br0 1 # while true ; do echo 4096 > /sys/class/net/br0/bridge/hash_max; done Signed-off-by: Curt Brune <curt@cumulusnetworks.com> Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15netpoll: Fix missing TXQ unlock and and OOPS.David S. Miller
[ Upstream commit aca5f58f9ba803ec8c2e6bcf890db17589e8dfcc ] The VLAN tag handling code in netpoll_send_skb_on_dev() has two problems. 1) It exits without unlocking the TXQ. 2) It then tries to queue a NULL skb to npinfo->txq. Reported-by: Ahmed Tamrawi <atamrawi@iastate.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15net: llc: fix use after free in llc_ui_recvmsgDaniel Borkmann
[ Upstream commit 4d231b76eef6c4a6bd9c96769e191517765942cb ] While commit 30a584d944fb fixes datagram interface in LLC, a use after free bug has been introduced for SOCK_STREAM sockets that do not make use of MSG_PEEK. The flow is as follow ... if (!(flags & MSG_PEEK)) { ... sk_eat_skb(sk, skb, false); ... } ... if (used + offset < skb->len) continue; ... where sk_eat_skb() calls __kfree_skb(). Therefore, cache original length and work on skb_len to check partial reads. Fixes: 30a584d944fb ("[LLX]: SOCK_DGRAM interface fixes") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15ipv4: fix tunneled VM traffic over hw VXLAN/GRE GSO NICWei-Chun Chao
[ Upstream commit 7a7ffbabf99445704be01bff5d7e360da908cf8e ] VM to VM GSO traffic is broken if it goes through VXLAN or GRE tunnel and the physical NIC on the host supports hardware VXLAN/GRE GSO offload (e.g. bnx2x and next-gen mlx4). Two issues - (VXLAN) VM traffic has SKB_GSO_DODGY and SKB_GSO_UDP_TUNNEL with SKB_GSO_TCP/UDP set depending on the inner protocol. GSO header integrity check fails in udp4_ufo_fragment if inner protocol is TCP. Also gso_segs is calculated incorrectly using skb->len that includes tunnel header. Fix: robust check should only be applied to the inner packet. (VXLAN & GRE) Once GSO header integrity check passes, NULL segs is returned and the original skb is sent to hardware. However the tunnel header is already pulled. Fix: tunnel header needs to be restored so that hardware can perform GSO properly on the original packet. Signed-off-by: Wei-Chun Chao <weichunc@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15vlan: Fix header ops passthru when doing TX VLAN offload.David S. Miller
[ Upstream commit 2205369a314e12fcec4781cc73ac9c08fc2b47de ] When the vlan code detects that the real device can do TX VLAN offloads in hardware, it tries to arrange for the real device's header_ops to be invoked directly. But it does so illegally, by simply hooking the real device's header_ops up to the VLAN device. This doesn't work because we will end up invoking a set of header_ops routines which expect a device type which matches the real device, but will see a VLAN device instead. Fix this by providing a pass-thru set of header_ops which will arrange to pass the proper real device instead. To facilitate this add a dev_rebuild_header(). There are implementations which provide a ->cache and ->create but not a ->rebuild (f.e. PLIP). So we need a helper function just like dev_hard_header() to avoid crashes. Use this helper in the one existing place where the header_ops->rebuild was being invoked, the neighbour code. With lots of help from Florian Westphal. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15net: rose: restore old recvmsg behaviorFlorian Westphal
[ Upstream commit f81152e35001e91997ec74a7b4e040e6ab0acccf ] recvmsg handler in net/rose/af_rose.c performs size-check ->msg_namelen. After commit f3d3342602f8bcbf37d7c46641cb9bca7618eb1c (net: rework recvmsg handler msg_name and msg_namelen logic), we now always take the else branch due to namelen being initialized to 0. Digging in netdev-vger-cvs git repo shows that msg_namelen was initialized with a fixed-size since at least 1995, so the else branch was never taken. Compile tested only. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15rds: prevent dereference of a NULL deviceSasha Levin
[ Upstream commit c2349758acf1874e4c2b93fe41d072336f1a31d0 ] Binding might result in a NULL device, which is dereferenced causing this BUG: [ 1317.260548] BUG: unable to handle kernel NULL pointer dereference at 000000000000097 4 [ 1317.261847] IP: [<ffffffff84225f52>] rds_ib_laddr_check+0x82/0x110 [ 1317.263315] PGD 418bcb067 PUD 3ceb21067 PMD 0 [ 1317.263502] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 1317.264179] Dumping ftrace buffer: [ 1317.264774] (ftrace buffer empty) [ 1317.265220] Modules linked in: [ 1317.265824] CPU: 4 PID: 836 Comm: trinity-child46 Tainted: G W 3.13.0-rc4- next-20131218-sasha-00013-g2cebb9b-dirty #4159 [ 1317.267415] task: ffff8803ddf33000 ti: ffff8803cd31a000 task.ti: ffff8803cd31a000 [ 1317.268399] RIP: 0010:[<ffffffff84225f52>] [<ffffffff84225f52>] rds_ib_laddr_check+ 0x82/0x110 [ 1317.269670] RSP: 0000:ffff8803cd31bdf8 EFLAGS: 00010246 [ 1317.270230] RAX: 0000000000000000 RBX: ffff88020b0dd388 RCX: 0000000000000000 [ 1317.270230] RDX: ffffffff8439822e RSI: 00000000000c000a RDI: 0000000000000286 [ 1317.270230] RBP: ffff8803cd31be38 R08: 0000000000000000 R09: 0000000000000000 [ 1317.270230] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [ 1317.270230] R13: 0000000054086700 R14: 0000000000a25de0 R15: 0000000000000031 [ 1317.270230] FS: 00007ff40251d700(0000) GS:ffff88022e200000(0000) knlGS:000000000000 0000 [ 1317.270230] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1317.270230] CR2: 0000000000000974 CR3: 00000003cd478000 CR4: 00000000000006e0 [ 1317.270230] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1317.270230] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000090602 [ 1317.270230] Stack: [ 1317.270230] 0000000054086700 5408670000a25de0 5408670000000002 0000000000000000 [ 1317.270230] ffffffff84223542 00000000ea54c767 0000000000000000 ffffffff86d26160 [ 1317.270230] ffff8803cd31be68 ffffffff84223556 ffff8803cd31beb8 ffff8800c6765280 [ 1317.270230] Call Trace: [ 1317.270230] [<ffffffff84223542>] ? rds_trans_get_preferred+0x42/0xa0 [ 1317.270230] [<ffffffff84223556>] rds_trans_get_preferred+0x56/0xa0 [ 1317.270230] [<ffffffff8421c9c3>] rds_bind+0x73/0xf0 [ 1317.270230] [<ffffffff83e4ce62>] SYSC_bind+0x92/0xf0 [ 1317.270230] [<ffffffff812493f8>] ? context_tracking_user_exit+0xb8/0x1d0 [ 1317.270230] [<ffffffff8119313d>] ? trace_hardirqs_on+0xd/0x10 [ 1317.270230] [<ffffffff8107a852>] ? syscall_trace_enter+0x32/0x290 [ 1317.270230] [<ffffffff83e4cece>] SyS_bind+0xe/0x10 [ 1317.270230] [<ffffffff843a6ad0>] tracesys+0xdd/0xe2 [ 1317.270230] Code: 00 8b 45 cc 48 8d 75 d0 48 c7 45 d8 00 00 00 00 66 c7 45 d0 02 00 89 45 d4 48 89 df e8 78 49 76 ff 41 89 c4 85 c0 75 0c 48 8b 03 <80> b8 74 09 00 00 01 7 4 06 41 bc 9d ff ff ff f6 05 2a b6 c2 02 [ 1317.270230] RIP [<ffffffff84225f52>] rds_ib_laddr_check+0x82/0x110 [ 1317.270230] RSP <ffff8803cd31bdf8> [ 1317.270230] CR2: 0000000000000974 Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15ipv6: always set the new created dst's from in ip6_rt_copyLi RongQing
[ Upstream commit 24f5b855e17df7e355eacd6c4a12cc4d6a6c9ff0 ] ip6_rt_copy only sets dst.from if ort has flag RTF_ADDRCONF and RTF_DEFAULT. but the prefix routes which did get installed by hand locally can have an expiration, and no any flag combination which can ensure a potential from does never expire, so we should always set the new created dst's from. This also fixes the new created dst is always expired since the ort, which is created by RA, maybe has RTF_EXPIRES and RTF_ADDRCONF, but no RTF_DEFAULT. Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> CC: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15net: inet_diag: zero out uninitialized idiag_{src,dst} fieldsDaniel Borkmann
[ Upstream commit b1aac815c0891fe4a55a6b0b715910142227700f ] Jakub reported while working with nlmon netlink sniffer that parts of the inet_diag_sockid are not initialized when r->idiag_family != AF_INET6. That is, fields of r->id.idiag_src[1 ... 3], r->id.idiag_dst[1 ... 3]. In fact, it seems that we can leak 6 * sizeof(u32) byte of kernel [slab] memory through this. At least, in udp_dump_one(), we allocate a skb in ... rep = nlmsg_new(sizeof(struct inet_diag_msg) + ..., GFP_KERNEL); ... and then pass that to inet_sk_diag_fill() that puts the whole struct inet_diag_msg into the skb, where we only fill out r->id.idiag_src[0], r->id.idiag_dst[0] and leave the rest untouched: r->id.idiag_src[0] = inet->inet_rcv_saddr; r->id.idiag_dst[0] = inet->inet_daddr; struct inet_diag_msg embeds struct inet_diag_sockid that is correctly / fully filled out in IPv6 case, but for IPv4 not. So just zero them out by using plain memset (for this little amount of bytes it's probably not worth the extra check for idiag_family == AF_INET). Similarly, fix also other places where we fill that out. Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15ip_gre: fix msg_name parsing for recvfrom/recvmsgTimo Teräs
[ Upstream commit 0e3da5bb8da45890b1dc413404e0f978ab71173e ] ipgre_header_parse() needs to parse the tunnel's ip header and it uses mac_header to locate the iphdr. This got broken when gre tunneling was refactored as mac_header is no longer updated to point to iphdr. Introduce skb_pop_mac_header() helper to do the mac_header assignment and use it in ipgre_rcv() to fix msg_name parsing. Bug introduced in commit c54419321455 (GRE: Refactor GRE tunneling code.) Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15net: unix: allow bind to fail on mutex lockSasha Levin
[ Upstream commit 37ab4fa7844a044dc21fde45e2a0fc2f3c3b6490 ] This is similar to the set_peek_off patch where calling bind while the socket is stuck in unix_dgram_recvmsg() will block and cause a hung task spew after a while. This is also the last place that did a straightforward mutex_lock(), so there shouldn't be any more of these patches. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15ipv6: fix illegal mac_header comparison on 32bitHannes Frederic Sowa
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15net: unix: allow set_peek_off to failSasha Levin
[ Upstream commit 12663bfc97c8b3fdb292428105dd92d563164050 ] unix_dgram_recvmsg() will hold the readlock of the socket until recv is complete. In the same time, we may try to setsockopt(SO_PEEK_OFF) which will hang until unix_dgram_recvmsg() will complete (which can take a while) without allowing us to break out of it, triggering a hung task spew. Instead, allow set_peek_off to fail, this way userspace will not hang. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15inet: fix NULL pointer Oops in fib(6)_rule_suppressStefan Tomanek
[ Upstream commit 673498b8ed4c4d4b7221c5309d891c5eac2b7528 ] This changes ensures that the routing entry investigated by the suppress function actually does point to a device struct before following that pointer, fixing a possible kernel oops situation when verifying the interface group associated with a routing table entry. According to Daniel Golle, this Oops can be triggered by a user process trying to establish an outgoing IPv6 connection while having no real IPv6 connectivity set up (only autoassigned link-local addresses). Fixes: 6ef94cfafba15 ("fib_rules: add route suppression based on ifgroup") Reported-by: Daniel Golle <daniel.golle@gmail.com> Tested-by: Daniel Golle <daniel.golle@gmail.com> Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15net: drop_monitor: fix the value of maxattrChangli Gao
[ Upstream commit d323e92cc3f4edd943610557c9ea1bb4bb5056e8 ] maxattr in genl_family should be used to save the max attribute type, but not the max command type. Drop monitor doesn't support any attributes, so we should leave it as zero. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15ipv6: don't count addrconf generated routes against gc limitHannes Frederic Sowa
[ Upstream commit a3300ef4bbb1f1e33ff0400e1e6cf7733d988f4f ] Brett Ciphery reported that new ipv6 addresses failed to get installed because the addrconf generated dsts where counted against the dst gc limit. We don't need to count those routes like we currently don't count administratively added routes. Because the max_addresses check enforces a limit on unbounded address generation first in case someone plays with router advertisments, we are still safe here. Reported-by: Brett Ciphery <brett.ciphery@windriver.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15packet: fix send path when running with proto == 0Daniel Borkmann
[ Upstream commit 66e56cd46b93ef407c60adcac62cf33b06119d50 ] Commit e40526cb20b5 introduced a cached dev pointer, that gets hooked into register_prot_hook(), __unregister_prot_hook() to update the device used for the send path. We need to fix this up, as otherwise this will not work with sockets created with protocol = 0, plus with sll_protocol = 0 passed via sockaddr_ll when doing the bind. So instead, assign the pointer directly. The compiler can inline these helper functions automagically. While at it, also assume the cached dev fast-path as likely(), and document this variant of socket creation as it seems it is not widely used (seems not even the author of TX_RING was aware of that in his reference example [1]). Tested with reproducer from e40526cb20b5. [1] http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap#Example Fixes: e40526cb20b5 ("packet: fix use after free race in send path when dev is released") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Tested-by: Salam Noureddine <noureddine@aristanetworks.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15br: fix use of ->rx_handler_data in code executed on non-rx_handler pathJiri Pirko
[ Upstream commit 859828c0ea476b42f3a93d69d117aaba90994b6f ] br_stp_rcv() is reached by non-rx_handler path. That means there is no guarantee that dev is bridge port and therefore simple NULL check of ->rx_handler_data is not enough. There is need to check if dev is really bridge port and since only rcu read lock is held here, do it by checking ->rx_handler pointer. Note that synchronize_net() in netdev_rx_handler_unregister() ensures this approach as valid. Introduced originally by: commit f350a0a87374418635689471606454abc7beaa3a "bridge: use rx_handler_data pointer to store net_bridge_port pointer" Fixed but not in the best way by: commit b5ed54e94d324f17c97852296d61a143f01b227a "bridge: fix RCU races with bridge port" Reintroduced by: commit 716ec052d2280d511e10e90ad54a86f5b5d4dcc2 "bridge: fix NULL pointer deref of br_port_get_rcu" Please apply to stable trees as well. Thanks. RH bugzilla reference: https://bugzilla.redhat.com/show_bug.cgi?id=1025770 Reported-by: Laine Stump <laine@redhat.com> Debugged-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15net: clear local_df when passing skb between namespacesHannes Frederic Sowa
[ Upstream commit 239c78db9c41a8f524cce60507440d72229d73bc ] We must clear local_df when passing the skb between namespaces as the packet is not local to the new namespace any more and thus may not get fragmented by local rules. Fred Templin noticed that other namespaces do fragment IPv6 packets while forwarding. Instead they should have send back a PTB. The same problem should be present when forwarding DF-IPv4 packets between namespaces. Reported-by: Templin, Fred L <Fred.L.Templin@boeing.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15rds: prevent BUG_ON triggered on congestion update to loopbackVenkat Venkatsubra
[ Upstream commit 18fc25c94eadc52a42c025125af24657a93638c0 ] After congestion update on a local connection, when rds_ib_xmit returns less bytes than that are there in the message, rds_send_xmit calls back rds_ib_xmit with an offset that causes BUG_ON(off & RDS_FRAG_SIZE) to trigger. For a 4Kb PAGE_SIZE rds_ib_xmit returns min(8240,4096)=4096 when actually the message contains 8240 bytes. rds_send_xmit thinks there is more to send and calls rds_ib_xmit again with a data offset "off" of 4096-48(rds header) =4048 bytes thus hitting the BUG_ON(off & RDS_FRAG_SIZE) [RDS_FRAG_SIZE=4k]. The commit 6094628bfd94323fc1cea05ec2c6affd98c18f7f "rds: prevent BUG_ON triggering on congestion map updates" introduced this regression. That change was addressing the triggering of a different BUG_ON in rds_send_xmit() on PowerPC architecture with 64Kbytes PAGE_SIZE: BUG_ON(ret != 0 && conn->c_xmit_sg == rm->data.op_nents); This was the sequence it was going through: (rds_ib_xmit) /* Do not send cong updates to IB loopback */ if (conn->c_loopback && rm->m_inc.i_hdr.h_flags & RDS_FLAG_CONG_BITMAP) { rds_cong_map_updated(conn->c_fcong, ~(u64) 0); return sizeof(struct rds_header) + RDS_CONG_MAP_BYTES; } rds_ib_xmit returns 8240 rds_send_xmit: c_xmit_data_off = 0 + 8240 - 48 (rds header accounted only the first time) = 8192 c_xmit_data_off < 65536 (sg->length), so calls rds_ib_xmit again rds_ib_xmit returns 8240 rds_send_xmit: c_xmit_data_off = 8192 + 8240 = 16432, calls rds_ib_xmit again and so on (c_xmit_data_off 24672,32912,41152,49392,57632) rds_ib_xmit returns 8240 On this iteration this sequence causes the BUG_ON in rds_send_xmit: while (ret) { tmp = min_t(int, ret, sg->length - conn->c_xmit_data_off); [tmp = 65536 - 57632 = 7904] conn->c_xmit_data_off += tmp; [c_xmit_data_off = 57632 + 7904 = 65536] ret -= tmp; [ret = 8240 - 7904 = 336] if (conn->c_xmit_data_off == sg->length) { conn->c_xmit_data_off = 0; sg++; conn->c_xmit_sg++; BUG_ON(ret != 0 && conn->c_xmit_sg == rm->data.op_nents); [c_xmit_sg = 1, rm->data.op_nents = 1] What the current fix does: Since the congestion update over loopback is not actually transmitted as a message, all that rds_ib_xmit needs to do is let the caller think the full message has been transmitted and not return partial bytes. It will return 8240 (RDS_CONG_MAP_BYTES+48) when PAGE_SIZE is 4Kb. And 64Kb+48 when page size is 64Kb. Reported-by: Josh Hunt <joshhunt00@gmail.com> Tested-by: Honggang Li <honli@redhat.com> Acked-by: Bang Nguyen <bang.nguyen@oracle.com> Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15IPv6: Fixed support for blackhole and prohibit routesKamala R
[ Upstream commit 7150aede5dd241539686e17d9592f5ebd28a2cda ] The behaviour of blackhole and prohibit routes has been corrected by setting the input and output pointers of the dst variable appropriately. For blackhole routes, they are set to dst_discard and to ip6_pkt_discard and ip6_pkt_discard_out respectively for prohibit routes. ipv6: ip6_pkt_prohibit(_out) should not depend on CONFIG_IPV6_MULTIPLE_TABLES We need ip6_pkt_prohibit(_out) available without CONFIG_IPV6_MULTIPLE_TABLES Signed-off-by: Kamala R <kamala@aristanetworks.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09radiotap: fix bitmap-end-finding buffer overrunJohannes Berg
commit bd02cd2549cfcdfc57cb5ce57ffc3feb94f70575 upstream. Evan Huus found (by fuzzing in wireshark) that the radiotap iterator code can access beyond the length of the buffer if the first bitmap claims an extension but then there's no data at all. Fix this. Reported-by: Evan Huus <eapache@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20Revert "net: update consumers of MSG_MORE to recognize MSG_SENDPAGE_NOTLAST"Greg Kroah-Hartman
It turns out that commit: d3f7d56a7a4671d395e8af87071068a195257bf6 was applied to the tree twice, which didn't hurt anything, but it's good to fix this up. Reported-by: Veaceslav Falico <veaceslav@falico.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Shawn Landden <shawnlandden@gmail.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20mac80211: don't attempt to reorder multicast framesJohannes Berg
commit 051a41fa4ee14f5c39668f0980973b9a195de560 upstream. Multicast frames can't be transmitted as part of an aggregation session (such a session couldn't even be set up) so don't try to reorder them. Trying to do so would cause the reorder to stop working correctly since multicast QoS frames (as transmitted by the Aruba APs this was found with) would cause sequence number confusion in the buffer. Reported-by: Blaise Gassend <blaise@suitabletech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20mac80211: fix scheduled scan rtnl deadlockJohannes Berg
commit 18db594a1005d908d995a2fc8f5a7bf4286fdca0 upstream. When changing cfg80211 to use RTNL locking, this caused a deadlock in mac80211 as it calls cfg80211_sched_scan_stopped() from a work item that's on a workqueue that is flushed with the RTNL held. Fix this by simply using schedule_work(), the work only needs to finish running before the wiphy is unregistered, no other synchronisation (e.g. with suspend) is really required since for suspend userspace is already blocked anyway when we flush the workqueue so will only pick up the event after resume. Fixes: 5fe231e87372 ("cfg80211: vastly simplify locking") Reported-and-tested-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20Revert "mac80211: allow disable power save in mesh"Bob Copeland
commit 2d3db210860f1df099a35b1dd54cca35454e0361 upstream. This reverts commit ee1f668136b2fb6640ee2d54c2a525ea41f98211. The aformentioned commit added a check to allow 'iw wlan0 set power_save off' to work for mesh interfaces. However, this is problematic because it also allows 'iw wlan0 set power_save on', which will crash in short order because all of the subsequent code manipulates sdata->u.mgd. The power-saving states for mesh interfaces can be manipulated through the mesh config, e.g: 'iw wlan0 set mesh_param mesh_power_save=active' (which, despite the name, actualy disables power saving since the setting refers to the type of sleep the interface undergoes). Fixes: ee1f668136b2 ("mac80211: allow disable power save in mesh") Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-20cfg80211: disable 5/10 MHz support for all driversJohannes Berg
commit 9f16d84ad73ea04145a5dc85c8f1067915b37eea upstream. Due to nl80211 API breakage, 5/10 MHz support is broken for all drivers. Fixing it requires adding new API, but that can't be done as a bugfix commit since that would require either updating all APIs in the trees needing the bugfix or cause different kernels to have incompatible API. Therefore, just disable 5/10 MHz support for all drivers. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-11net: update consumers of MSG_MORE to recognize MSG_SENDPAGE_NOTLASTShawn Landden
commit d3f7d56a7a4671d395e8af87071068a195257bf6 upstream. Commit 35f9c09fe (tcp: tcp_sendpages() should call tcp_push() once) added an internal flag MSG_SENDPAGE_NOTLAST, similar to MSG_MORE. algif_hash, algif_skcipher, and udp used MSG_MORE from tcp_sendpages() and need to see the new flag as identical to MSG_MORE. This fixes sendfile() on AF_ALG. v3: also fix udp Cc: Tom Herbert <therbert@google.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Reported-and-tested-by: Shawn Landden <shawnlandden@gmail.com> Original-patch: Richard Weinberger <richard@nod.at> Signed-off-by: Shawn Landden <shawn@churchofgit.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08xfrm: Fix null pointer dereference when decoding sessionsSteffen Klassert
[ Upstream commit 84502b5ef9849a9694673b15c31bd3ac693010ae ] On some codepaths the skb does not have a dst entry when xfrm_decode_session() is called. So check for a valid skb_dst() before dereferencing the device interface index. We use 0 as the device index if there is no valid skb_dst(), or at reverse decoding we use skb_iif as device interface index. Bug was introduced with git commit bafd4bd4dc ("xfrm: Decode sessions with output interface."). Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08{pktgen, xfrm} Update IPv4 header total len and checksum after tranformationfan.du
[ Upstream commit 3868204d6b89ea373a273e760609cb08020beb1a ] commit a553e4a6317b2cfc7659542c10fe43184ffe53da ("[PKTGEN]: IPSEC support") tried to support IPsec ESP transport transformation for pktgen, but acctually this doesn't work at all for two reasons(The orignal transformed packet has bad IPv4 checksum value, as well as wrong auth value, reported by wireshark) - After transpormation, IPv4 header total length needs update, because encrypted payload's length is NOT same as that of plain text. - After transformation, IPv4 checksum needs re-caculate because of payload has been changed. With this patch, armmed pktgen with below cofiguration, Wireshark is able to decrypted ESP packet generated by pktgen without any IPv4 checksum error or auth value error. pgset "flag IPSEC" pgset "flows 1" Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08ipv6: fix possible seqlock deadlock in ip6_finish_output2Hannes Frederic Sowa
[ Upstream commit 7f88c6b23afbd31545c676dea77ba9593a1a14bf ] IPv6 stats are 64 bits and thus are protected with a seqlock. By not disabling bottom-half we could deadlock here if we don't disable bh and a softirq reentrantly updates the same mib. Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08inet: fix possible seqlock deadlocksEric Dumazet
[ Upstream commit f1d8cba61c3c4b1eb88e507249c4cb8d635d9a76 ] In commit c9e9042994d3 ("ipv4: fix possible seqlock deadlock") I left another places where IP_INC_STATS_BH() were improperly used. udp_sendmsg(), ping_v4_sendmsg() and tcp_v4_connect() are called from process context, not from softirq context. This was detected by lockdep seqlock support. Reported-by: jongman heo <jongman.heo@samsung.com> Fixes: 584bdf8cbdf6 ("[IPV4]: Fix "ipOutNoRoutes" counter error for TCP and UDP") Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08net: update consumers of MSG_MORE to recognize MSG_SENDPAGE_NOTLASTShawn Landden
[ Upstream commit d3f7d56a7a4671d395e8af87071068a195257bf6 ] Commit 35f9c09fe (tcp: tcp_sendpages() should call tcp_push() once) added an internal flag MSG_SENDPAGE_NOTLAST, similar to MSG_MORE. algif_hash, algif_skcipher, and udp used MSG_MORE from tcp_sendpages() and need to see the new flag as identical to MSG_MORE. This fixes sendfile() on AF_ALG. v3: also fix udp Cc: Tom Herbert <therbert@google.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: <stable@vger.kernel.org> # 3.4.x + 3.2.x Reported-and-tested-by: Shawn Landden <shawnlandden@gmail.com> Original-patch: Richard Weinberger <richard@nod.at> Signed-off-by: Shawn Landden <shawn@churchofgit.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08sch_tbf: handle too small burstEric Dumazet
[ Upstream commit 4d0820cf6a55d72350cb2d24a4504f62fbde95d9 ] If a too small burst is inadvertently set on TBF, we might trigger a bug in tbf_segment(), as 'skb' instead of 'segs' was used in a qdisc_reshape_fail() call. tc qdisc add dev eth0 root handle 1: tbf latency 50ms burst 1KB rate 50mbit Fix the bug, and add a warning, as such configuration is not going to work anyway for non GSO packets. (For some reason, one has to use a burst >= 1520 to get a working configuration, even with old kernels. This is a probable iproute2/tc bug) Based on a report and initial patch from Yang Yingliang Fixes: e43ac79a4bc6 ("sch_tbf: segment too big GSO packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08gro: Clean up tcpX_gro_receive checksum verificationHerbert Xu
[ Upstream commit b8ee93ba80b5a0b6c3c06b65c34dd1276f16c047 ] This patch simplifies the checksum verification in tcpX_gro_receive by reusing the CHECKSUM_COMPLETE code for CHECKSUM_NONE. All it does for CHECKSUM_NONE is compute the partial checksum and then treat it as if it came from the hardware (CHECKSUM_COMPLETE). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cheers, Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08gro: Only verify TCP checksums for candidatesHerbert Xu
[ Upstream commit cc5c00bbb44c5d68b883aa5cb9d01514a2525d94 ] In some cases we may receive IP packets that are longer than their stated lengths. Such packets are never merged in GRO. However, we may end up computing their checksums incorrectly and end up allowing packets with a bogus checksum enter our stack with the checksum status set as verified. Since such packets are rare and not performance-critical, this patch simply skips the checksum verification for them. Reported-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Thanks, Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08gso: handle new frag_list of frags GRO packetsHerbert Xu
[ Upstream commit 9d8506cc2d7ea1f911c72c100193a3677f6668c3 ] Recently GRO started generating packets with frag_lists of frags. This was not handled by GSO, thus leading to a crash. Thankfully these packets are of a regular form and are easy to handle. This patch handles them in two ways. For completely non-linear frag_list entries, we simply continue to iterate over the frag_list frags once we exhaust the normal frags. For frag_list entries with linear parts, we call pskb_trim on the first part of the frag_list skb, and then process the rest of the frags in the usual way. This patch also kills a chunk of dead frag_list code that has obviously never ever been run since it ends up generating a bogus GSO-segmented packet with a frag_list entry. Future work is planned to split super big packets into TSO ones. Fixes: 8a29111c7ca6 ("net: gro: allow to build full sized skb") Reported-by: Christoph Paasch <christoph.paasch@uclouvain.be> Reported-by: Jerry Chu <hkchu@google.com> Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Sander Eikelenboom <linux@eikelenboom.it> Tested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08af_packet: block BH in prb_shutdown_retire_blk_timer()Veaceslav Falico
[ Upstream commit ec6f809ff6f19fafba3212f6aff0dda71dfac8e8 ] Currently we're using plain spin_lock() in prb_shutdown_retire_blk_timer(), however the timer might fire right in the middle and thus try to re-aquire the same spinlock, leaving us in a endless loop. To fix that, use the spin_lock_bh() to block it. Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.") CC: "David S. Miller" <davem@davemloft.net> CC: Daniel Borkmann <dborkman@redhat.com> CC: Willem de Bruijn <willemb@google.com> CC: Phil Sutter <phil@nwl.cc> CC: Eric Dumazet <edumazet@google.com> Reported-by: Jan Stancek <jstancek@redhat.com> Tested-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08packet: fix use after free race in send path when dev is releasedDaniel Borkmann
[ Upstream commit e40526cb20b5ee53419452e1f03d97092f144418 ] Salam reported a use after free bug in PF_PACKET that occurs when we're sending out frames on a socket bound device and suddenly the net device is being unregistered. It appears that commit 827d9780 introduced a possible race condition between {t,}packet_snd() and packet_notifier(). In the case of a bound socket, packet_notifier() can drop the last reference to the net_device and {t,}packet_snd() might end up suddenly sending a packet over a freed net_device. To avoid reverting 827d9780 and thus introducing a performance regression compared to the current state of things, we decided to hold a cached RCU protected pointer to the net device and maintain it on write side via bind spin_lock protected register_prot_hook() and __unregister_prot_hook() calls. In {t,}packet_snd() path, we access this pointer under rcu_read_lock through packet_cached_dev_get() that holds reference to the device to prevent it from being freed through packet_notifier() while we're in send path. This is okay to do as dev_put()/dev_hold() are per-cpu counters, so this should not be a performance issue. Also, the code simplifies a bit as we don't need need_rls_dev anymore. Fixes: 827d978037d7 ("af-packet: Use existing netdev reference for bound sockets.") Reported-by: Salam Noureddine <noureddine@aristanetworks.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Salam Noureddine <noureddine@aristanetworks.com> Cc: Ben Greear <greearb@candelatech.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08bridge: flush br's address entry in fdb when remove the bridge devDing Tianhong
[ Upstream commit f873042093c0b418d2351fe142222b625c740149 ] When the following commands are executed: brctl addbr br0 ifconfig br0 hw ether <addr> rmmod bridge The calltrace will occur: [ 563.312114] device eth1 left promiscuous mode [ 563.312188] br0: port 1(eth1) entered disabled state [ 563.468190] kmem_cache_destroy bridge_fdb_cache: Slab cache still has objects [ 563.468197] CPU: 6 PID: 6982 Comm: rmmod Tainted: G O 3.12.0-0.7-default+ #9 [ 563.468199] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 563.468200] 0000000000000880 ffff88010f111e98 ffffffff814d1c92 ffff88010f111eb8 [ 563.468204] ffffffff81148efd ffff88010f111eb8 0000000000000000 ffff88010f111ec8 [ 563.468206] ffffffffa062a270 ffff88010f111ed8 ffffffffa063ac76 ffff88010f111f78 [ 563.468209] Call Trace: [ 563.468218] [<ffffffff814d1c92>] dump_stack+0x6a/0x78 [ 563.468234] [<ffffffff81148efd>] kmem_cache_destroy+0xfd/0x100 [ 563.468242] [<ffffffffa062a270>] br_fdb_fini+0x10/0x20 [bridge] [ 563.468247] [<ffffffffa063ac76>] br_deinit+0x4e/0x50 [bridge] [ 563.468254] [<ffffffff810c7dc9>] SyS_delete_module+0x199/0x2b0 [ 563.468259] [<ffffffff814e0922>] system_call_fastpath+0x16/0x1b [ 570.377958] Bridge firewalling registered --------------------------- cut here ------------------------------- The reason is that when the bridge dev's address is changed, the br_fdb_change_mac_address() will add new address in fdb, but when the bridge was removed, the address entry in the fdb did not free, the bridge_fdb_cache still has objects when destroy the cache, Fix this by flushing the bridge address entry when removing the bridge. v2: according to the Toshiaki Makita and Vlad's suggestion, I only delete the vlan0 entry, it still have a leak here if the vlan id is other number, so I need to call fdb_delete_by_port(br, NULL, 1) to flush all entries whose dst is NULL for the bridge. Suggested-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Suggested-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08net: core: Always propagate flag changes to interfacesVlad Yasevich
[ Upstream commit d2615bf450694c1302d86b9cc8a8958edfe4c3a4 ] The following commit: b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 net: only invoke dev->change_rx_flags when device is UP tried to fix a problem with VLAN devices and promiscuouse flag setting. The issue was that VLAN device was setting a flag on an interface that was down, thus resulting in bad promiscuity count. This commit blocked flag propagation to any device that is currently down. A later commit: deede2fabe24e00bd7e246eb81cd5767dc6fcfc7 vlan: Don't propagate flag changes on down interfaces fixed VLAN code to only propagate flags when the VLAN interface is up, thus fixing the same issue as above, only localized to VLAN. The problem we have now is that if we have create a complex stack involving multiple software devices like bridges, bonds, and vlans, then it is possible that the flags would not propagate properly to the physical devices. A simple examle of the scenario is the following: eth0----> bond0 ----> bridge0 ---> vlan50 If bond0 or eth0 happen to be down at the time bond0 is added to the bridge, then eth0 will never have promisc mode set which is currently required for operation as part of the bridge. As a result, packets with vlan50 will be dropped by the interface. The only 2 devices that implement the special flag handling are VLAN and DSA and they both have required code to prevent incorrect flag propagation. As a result we can remove the generic solution introduced in b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 and leave it to the individual devices to decide whether they will block flag propagation or not. Reported-by: Stefan Priebe <s.priebe@profihost.ag> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08ipv4: fix race in concurrent ip_route_input_slow()Alexei Starovoitov
[ Upstream commit dcdfdf56b4a6c9437fc37dbc9cee94a788f9b0c4 ] CPUs can ask for local route via ip_route_input_noref() concurrently. if nh_rth_input is not cached yet, CPUs will proceed to allocate equivalent DSTs on 'lo' and then will try to cache them in nh_rth_input via rt_cache_route() Most of the time they succeed, but on occasion the following two lines: orig = *p; prev = cmpxchg(p, orig, rt); in rt_cache_route() do race and one of the cpus fails to complete cmpxchg. But ip_route_input_slow() doesn't check the return code of rt_cache_route(), so dst is leaking. dst_destroy() is never called and 'lo' device refcnt doesn't go to zero, which can be seen in the logs as: unregister_netdevice: waiting for lo to become free. Usage count = 1 Adding mdelay() between above two lines makes it easily reproducible. Fix it similar to nh_pcpu_rth_output case. Fixes: d2d68ba9fe8b ("ipv4: Cache input routes in fib_info nexthops.") Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08tcp: don't update snd_nxt, when a socket is switched from repair modeAndrey Vagin
[ Upstream commit dbde497966804e63a38fdedc1e3815e77097efc2 ] snd_nxt must be updated synchronously with sk_send_head. Otherwise tp->packets_out may be updated incorrectly, what may bring a kernel panic. Here is a kernel panic from my host. [ 103.043194] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 103.044025] IP: [<ffffffff815aaaaf>] tcp_rearm_rto+0xcf/0x150 ... [ 146.301158] Call Trace: [ 146.301158] [<ffffffff815ab7f0>] tcp_ack+0xcc0/0x12c0 Before this panic a tcp socket was restored. This socket had sent and unsent data in the write queue. Sent data was restored in repair mode, then the socket was switched from reapair mode and unsent data was restored. After that the socket was switched back into repair mode. In that moment we had a socket where write queue looks like this: snd_una snd_nxt write_seq |_________|________| | sk_send_head After a second switching from repair mode the state of socket was changed: snd_una snd_nxt, write_seq |_________ ________| | sk_send_head This state is inconsistent, because snd_nxt and sk_send_head are not synchronized. Bellow you can find a call trace, how packets_out can be incremented twice for one skb, if snd_nxt and sk_send_head are not synchronized. In this case packets_out will be always positive, even when sk_write_queue is empty. tcp_write_wakeup skb = tcp_send_head(sk); tcp_fragment if (!before(tp->snd_nxt, TCP_SKB_CB(buff)->end_seq)) tcp_adjust_pcount(sk, skb, diff); tcp_event_new_data_sent tp->packets_out += tcp_skb_pcount(skb); I think update of snd_nxt isn't required, when a socket is switched from repair mode. Because it's initialized in tcp_connect_init. Then when a write queue is restored, snd_nxt is incremented in tcp_event_new_data_sent, so it's always is in consistent state. I have checked, that the bug is not reproduced with this patch and all tests about restoring tcp connections work fine. Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrey Vagin <avagin@openvz.org> Acked-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08xfrm: Release dst if this dst is improper for vti tunnelfan.du
[ Upstream commit 236c9f84868534c718b6889aa624de64763281f9 ] After searching rt by the vti tunnel dst/src parameter, if this rt has neither attached to any transformation nor the transformation is not tunnel oriented, this rt should be released back to ip layer. otherwise causing dst memory leakage. Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08netfilter: push reasm skb through instead of original frag skbsJiri Pirko
[ Upstream commit 6aafeef03b9d9ecf255f3a80ed85ee070260e1ae ] Pushing original fragments through causes several problems. For example for matching, frags may not be matched correctly. Take following example: <example> On HOSTA do: ip6tables -I INPUT -p icmpv6 -j DROP ip6tables -I INPUT -p icmpv6 -m icmp6 --icmpv6-type 128 -j ACCEPT and on HOSTB you do: ping6 HOSTA -s2000 (MTU is 1500) Incoming echo requests will be filtered out on HOSTA. This issue does not occur with smaller packets than MTU (where fragmentation does not happen) </example> As was discussed previously, the only correct solution seems to be to use reassembled skb instead of separete frags. Doing this has positive side effects in reducing sk_buff by one pointer (nfct_reasm) and also the reams dances in ipvs and conntrack can be removed. Future plan is to remove net/ipv6/netfilter/nf_conntrack_reasm.c entirely and use code in net/ipv6/reassembly.c instead. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08ip6_output: fragment outgoing reassembled skb properlyJiri Pirko
[ Upstream commit 9037c3579a277f3a23ba476664629fda8c35f7c4 ] If reassembled packet would fit into outdev MTU, it is not fragmented according the original frag size and it is send as single big packet. The second case is if skb is gso. In that case fragmentation does not happen according to the original frag size. This patch fixes these. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08ipv6: Fix inet6_init() cleanup orderVlad Yasevich
Commit 6d0bfe22611602f36617bc7aa2ffa1bbb2f54c67 net: ipv6: Add IPv6 support to the ping socket introduced a change in the cleanup logic of inet6_init and has a bug in that ipv6_packet_cleanup() may not be called. Fix the cleanup ordering. CC: Hannes Frederic Sowa <hannes@stressinduktion.org> CC: Lorenzo Colitti <lorenzo@google.com> CC: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-02 18:26:26 +0000