From e76fe57447e88916954bdcab1c0d2c708ec3c943 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 14 Dec 2009 12:52:53 +0000 Subject: sh: Remove old early serial console code V2 Now when the sh-sci driver can do early serial output, get rid of the old duplicated code. This patch is V2 and removes support for "earlyprintk=serial" together with the following kconfig options: CONFIG_EARLY_SCIF_CONSOLE CONFIG_EARLY_SCIF_CONSOLE_PORT CONFIG_EARLY_PRINTK With this patch applied "earlyprintk=" support is always built-in the SuperH kernel. For this to work the serial driver must have early platform support and in the case of sh-sci the serial console needs to be enabled: CONFIG_SERIAL_SH_SCI_CONSOLE=y So after enabling the SuperH SCI console kconfig option you also need to point out port using the kernel command line: "earlyprintk=sh-sci.N[,baudrate][,keep]" Remember that clocks may be disabled by the boot loader so you may have to do some board specific static clock setup before earlyprintk will work on your platform. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/Kconfig.debug | 44 -------------------------------------------- 1 file changed, 44 deletions(-) (limited to 'arch/sh/Kconfig.debug') diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 55907af1dc25..12fec72fec5f 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -19,50 +19,6 @@ config SH_STANDARD_BIOS mask ROM and no flash (WindowsCE machines fall in this category). If unsure, say N. -config EARLY_SCIF_CONSOLE - bool "Use early SCIF console" - help - This enables an early console using a fixed SCIF port. This can - be used by platforms that are either not running the SH - standard BIOS, or do not wish to use the BIOS callbacks for the - serial I/O. - -config EARLY_SCIF_CONSOLE_PORT - hex - depends on EARLY_SCIF_CONSOLE - default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705 - default "0xa4430000" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721 - default "0xf8420000" if CPU_SUBTYPE_SH7619 - default "0xff804000" if CPU_SUBTYPE_MXG - default "0xffc30000" if CPU_SUBTYPE_SHX3 - default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \ - CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \ - CPU_SUBTYPE_SH7343 - default "0xfe4c0000" if CPU_SUBTYPE_SH7757 - default "0xffeb0000" if CPU_SUBTYPE_SH7785 - default "0xffeb0000" if CPU_SUBTYPE_SH7786 - default "0xfffe8000" if CPU_SUBTYPE_SH7203 - default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263 - default "0xffe80000" if CPU_SH4 - default "0xa4000150" if CPU_SH3 - default "0x00000000" - -config EARLY_PRINTK - bool "Early printk support" - depends on SH_STANDARD_BIOS || EARLY_SCIF_CONSOLE - help - Say Y here to redirect kernel printk messages to the serial port - used by the SH-IPL bootloader, starting very early in the boot - process and ending when the kernel's serial console is initialised. - This option is only useful porting the kernel to a new machine, - when the kernel may crash or hang before the serial console is - initialised. If unsure, say N. - - On devices that are running SH-IPL and want to keep the port - initialization consistent while not using the BIOS callbacks, - select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using - the kernel command line option to toggle back and forth. - config STACK_DEBUG bool "Check for stack overflows" depends on DEBUG_KERNEL && SUPERH32 -- cgit v1.2.3