diff options
| author | Srinivas Kandagatla <srinivas.kandagatla@linaro.org> | 2014-06-23 18:14:38 +0100 |
|---|---|---|
| committer | Andrey Konovalov <andrey.konovalov@linaro.org> | 2014-10-08 21:04:49 +0400 |
| commit | 4ab52e4de749969de3a9793e40cbf90110ad9635 (patch) | |
| tree | 1b6f6d09c324d01e08f09438f23fdfa3ee588b2e | |
| parent | d614f38ca8f0cc4681baa5b5a7e08786cdec83ad (diff) | |
DT:ARM:APQ8064: Add SATA controller support.
This patch adds AHCI based SATA controller support to APQ8064.
Tested on IFC6410 board.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
| -rw-r--r-- | arch/arm/boot/dts/qcom-apq8064.dtsi | 40 |
1 files changed, 40 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 38d3efaa6b32..fa057b79a2ab 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -274,6 +274,17 @@ regulator-always-on; }; + pm8921_s4: pm8921-s4 { + compatible = "qcom,rpm-pm8921-smps"; + reg = <QCOM_RPM_PM8921_SMPS4>; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,boot-load = <200000>; + qcom,switch-mode-frequency = <3200000>; + regulator-always-on; + }; + pm8921_l3: pm8921-l3 { compatible = "qcom,rpm-pm8921-pldo"; reg = <QCOM_RPM_PM8921_LDO3>; @@ -396,6 +407,35 @@ usb-phy = <&usb4_phy>; }; + sata_phy0:sata-phy@1b400000{ + compatible = "qcom,apq8064-sata-phy"; + reg = <0x1b400000 0x200>; + reg-names = "phy_mem"; + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + #phy-cells = <0>; + }; + + sata0: sata@29000000 { + compatible = "generic-ahci"; + reg = <0x29000000 0x180>; + interrupts = <0 209 0>; + clocks = <&gcc SFAB_SATA_S_H_CLK>, <&gcc SATA_H_CLK>, + <&gcc SATA_A_CLK>, <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + + clock-names = "slave_iface", "iface", + "bus", "rxoob", + "core_pmalive"; + assigned-clocks = <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + assigned-clock-rates = <100000000>, <100000000>; + + phys = <&sata_phy0>; + phy-names = "sata-phy"; + target-supply = <&pm8921_s4>; + }; + /* Temporary fixed regulator */ vsdcc_fixed: vsdcc-regulator { compatible = "regulator-fixed"; |