diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mailbox/arm-mhu.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/mailbox/arm-mhu.txt | 39 |
1 files changed, 37 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/mailbox/arm-mhu.txt b/Documentation/devicetree/bindings/mailbox/arm-mhu.txt index 4971f03f0b33..ba659bcc7109 100644 --- a/Documentation/devicetree/bindings/mailbox/arm-mhu.txt +++ b/Documentation/devicetree/bindings/mailbox/arm-mhu.txt @@ -10,6 +10,15 @@ STAT register and the remote clears it after having read the data. The last channel is specified to be a 'Secure' resource, hence can't be used by Linux running NS. +The MHU drives the interrupt signal using a 32-bit register, with all +32-bits logically ORed together. It provides a set of registers to +enable software to set, clear and check the status of each of the bits +of this register independently. The use of 32 bits per interrupt line +enables software to provide more information about the source of the +interrupt. For example, each bit of the register can be associated with +a type of event that can contribute to raising the interrupt. Each of +the 32-bits can be used as "doorbell" to alert the remote processor. + Mailbox Device Node: ==================== @@ -18,13 +27,21 @@ Required properties: - compatible: Shall be "arm,mhu" & "arm,primecell" - reg: Contains the mailbox register address range (base address and length) -- #mbox-cells Shall be 1 - the index of the channel needed. +- #mbox-cells Shall be 1 - the index of the channel needed when + not used as set of doorbell bits. + Shall be 2 - the index of the channel needed, and + the index of the doorbell bit within the channel + when used in doorbell mode. - interrupts: Contains the interrupt information corresponding to - each of the 3 links of MHU. + each of the 3 physical channels of MHU namely low + priority non-secure, high priority non-secure and + secure channels. Example: -------- +1. Controller which doesn't support doorbells + mhu: mailbox@2b1f0000 { #mbox-cells = <1>; compatible = "arm,mhu", "arm,primecell"; @@ -41,3 +58,21 @@ Example: reg = <0 0x2e000000 0x4000>; mboxes = <&mhu 1>; /* HP-NonSecure */ }; + +2. Controller which supports doorbells + + mhu: mailbox@2b1f0000 { + #mbox-cells = <2>; + compatible = "arm,mhu", "arm,primecell"; + reg = <0 0x2b1f0000 0x1000>; + interrupts = <0 36 4>, /* LP-NonSecure */ + <0 35 4>; /* HP-NonSecure */ + clocks = <&clock 0 2 1>; + clock-names = "apb_pclk"; + }; + + mhu_client: scb@2e000000 { + compatible = "arm,scpi"; + reg = <0 0x2e000000 0x200>; + mboxes = <&mhu 1 4>; /* HP-NonSecure 5th doorbell bit */ + }; |