diff options
Diffstat (limited to 'drivers/gpu/arm/midgard/mali_kbase_config_defaults.h')
-rwxr-xr-x | drivers/gpu/arm/midgard/mali_kbase_config_defaults.h | 260 |
1 files changed, 260 insertions, 0 deletions
diff --git a/drivers/gpu/arm/midgard/mali_kbase_config_defaults.h b/drivers/gpu/arm/midgard/mali_kbase_config_defaults.h new file mode 100755 index 000000000000..ee7c96d8a2c8 --- /dev/null +++ b/drivers/gpu/arm/midgard/mali_kbase_config_defaults.h @@ -0,0 +1,260 @@ +/* + * + * (C) COPYRIGHT 2013-2015 ARM Limited. All rights reserved. + * + * This program is free software and is provided to you under the terms of the + * GNU General Public License version 2 as published by the Free Software + * Foundation, and any use by you of this program is subject to the terms + * of such GNU licence. + * + * A copy of the licence is included with the program, and can also be obtained + * from Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + + + +/** + * @file mali_kbase_config_defaults.h + * + * Default values for configuration settings + * + */ + +#ifndef _KBASE_CONFIG_DEFAULTS_H_ +#define _KBASE_CONFIG_DEFAULTS_H_ + +/* Include mandatory definitions per platform */ +#include <mali_kbase_config_platform.h> + +/** + * Irq throttle. It is the minimum desired time in between two + * consecutive gpu interrupts (given in 'us'). The irq throttle + * gpu register will be configured after this, taking into + * account the configured max frequency. + * + * Attached value: number in micro seconds + */ +#define DEFAULT_IRQ_THROTTLE_TIME_US 20 + +/** + * Default Job Scheduler initial runtime of a context for the CFS Policy, + * in time-slices. + * + * This value is relative to that of the least-run context, and defines + * where in the CFS queue a new context is added. A value of 1 means 'after + * the least-run context has used its timeslice'. Therefore, when all + * contexts consistently use the same amount of time, a value of 1 models a + * FIFO. A value of 0 would model a LIFO. + * + * The value is represented in "numbers of time slices". Multiply this + * value by that defined in @ref DEFAULT_JS_CTX_TIMESLICE_NS to get + * the time value for this in nanoseconds. + */ +#define DEFAULT_JS_CFS_CTX_RUNTIME_INIT_SLICES 1 + +/** + * Default Job Scheduler minimum runtime value of a context for CFS, in + * time_slices relative to that of the least-run context. + * + * This is a measure of how much preferrential treatment is given to a + * context that is not run very often. + * + * Specficially, this value defines how many timeslices such a context is + * (initially) allowed to use at once. Such contexts (e.g. 'interactive' + * processes) will appear near the front of the CFS queue, and can initially + * use more time than contexts that run continuously (e.g. 'batch' + * processes). + * + * This limit \b prevents a "stored-up timeslices" DoS attack, where a ctx + * not run for a long time attacks the system by using a very large initial + * number of timeslices when it finally does run. + * + * @note A value of zero allows not-run-often contexts to get scheduled in + * quickly, but to only use a single timeslice when they get scheduled in. + */ +#define DEFAULT_JS_CFS_CTX_RUNTIME_MIN_SLICES 2 + +/** +* Boolean indicating whether the driver is configured to be secure at +* a potential loss of performance. +* +* This currently affects only r0p0-15dev0 HW and earlier. +* +* On r0p0-15dev0 HW and earlier, there are tradeoffs between security and +* performance: +* +* - When this is set to true, the driver remains fully secure, +* but potentially loses performance compared with setting this to +* false. +* - When set to false, the driver is open to certain security +* attacks. +* +* From r0p0-00rel0 and onwards, there is no security loss by setting +* this to false, and no performance loss by setting it to +* true. +*/ +#define DEFAULT_SECURE_BUT_LOSS_OF_PERFORMANCE false + +enum { + /** + * Use unrestricted Address ID width on the AXI bus. + */ + KBASE_AID_32 = 0x0, + + /** + * Restrict GPU to a half of maximum Address ID count. + * This will reduce performance, but reduce bus load due to GPU. + */ + KBASE_AID_16 = 0x3, + + /** + * Restrict GPU to a quarter of maximum Address ID count. + * This will reduce performance, but reduce bus load due to GPU. + */ + KBASE_AID_8 = 0x2, + + /** + * Restrict GPU to an eighth of maximum Address ID count. + * This will reduce performance, but reduce bus load due to GPU. + */ + KBASE_AID_4 = 0x1 +}; + +/** + * Default setting for read Address ID limiting on AXI bus. + * + * Attached value: u32 register value + * KBASE_AID_32 - use the full 32 IDs (5 ID bits) + * KBASE_AID_16 - use 16 IDs (4 ID bits) + * KBASE_AID_8 - use 8 IDs (3 ID bits) + * KBASE_AID_4 - use 4 IDs (2 ID bits) + * Default value: KBASE_AID_32 (no limit). Note hardware implementation + * may limit to a lower value. + */ +#define DEFAULT_ARID_LIMIT KBASE_AID_32 + +/** + * Default setting for write Address ID limiting on AXI. + * + * Attached value: u32 register value + * KBASE_AID_32 - use the full 32 IDs (5 ID bits) + * KBASE_AID_16 - use 16 IDs (4 ID bits) + * KBASE_AID_8 - use 8 IDs (3 ID bits) + * KBASE_AID_4 - use 4 IDs (2 ID bits) + * Default value: KBASE_AID_32 (no limit). Note hardware implementation + * may limit to a lower value. + */ +#define DEFAULT_AWID_LIMIT KBASE_AID_32 + +/** + * Default UMP device mapping. A UMP_DEVICE_<device>_SHIFT value which + * defines which UMP device this GPU should be mapped to. + */ +#define DEFAULT_UMP_GPU_DEVICE_SHIFT UMP_DEVICE_Z_SHIFT + +/* + * Default period for DVFS sampling + */ +#define DEFAULT_PM_DVFS_PERIOD 100 /* 100ms */ + +/* + * Power Management poweroff tick granuality. This is in nanoseconds to + * allow HR timer support. + * + * On each scheduling tick, the power manager core may decide to: + * -# Power off one or more shader cores + * -# Power off the entire GPU + */ +#define DEFAULT_PM_GPU_POWEROFF_TICK_NS (400000) /* 400us */ + +/* + * Power Manager number of ticks before shader cores are powered off + */ +#define DEFAULT_PM_POWEROFF_TICK_SHADER (2) /* 400-800us */ + +/* + * Power Manager number of ticks before GPU is powered off + */ +#define DEFAULT_PM_POWEROFF_TICK_GPU (2) /* 400-800us */ + +/* + * Default scheduling tick granuality + */ +#define DEFAULT_JS_SCHEDULING_PERIOD_NS (100000000u) /* 100ms */ + +/* + * Default minimum number of scheduling ticks before jobs are soft-stopped. + * + * This defines the time-slice for a job (which may be different from that of a + * context) + */ +#define DEFAULT_JS_SOFT_STOP_TICKS (1) /* 100ms-200ms */ + +/* + * Default minimum number of scheduling ticks before CL jobs are soft-stopped. + */ +#define DEFAULT_JS_SOFT_STOP_TICKS_CL (1) /* 100ms-200ms */ + +/* + * Default minimum number of scheduling ticks before jobs are hard-stopped + */ +#define DEFAULT_JS_HARD_STOP_TICKS_SS (50) /* 5s */ +#define DEFAULT_JS_HARD_STOP_TICKS_SS_8408 (300) /* 30s */ + +/* + * Default minimum number of scheduling ticks before CL jobs are hard-stopped. + */ +#define DEFAULT_JS_HARD_STOP_TICKS_CL (50) /* 5s */ + +/* + * Default minimum number of scheduling ticks before jobs are hard-stopped + * during dumping + */ +#define DEFAULT_JS_HARD_STOP_TICKS_DUMPING (15000) /* 1500s */ + +/* + * Default timeout for software event jobs, after which these jobs will be + * cancelled. + */ +#define DEFAULT_JS_SOFT_EVENT_TIMEOUT ((u32)3000) /* 3s */ + +/* + * Default minimum number of scheduling ticks before the GPU is reset to clear a + * "stuck" job + */ +#define DEFAULT_JS_RESET_TICKS_SS (55) /* 5.5s */ +#define DEFAULT_JS_RESET_TICKS_SS_8408 (450) /* 45s */ + +/* + * Default minimum number of scheduling ticks before the GPU is reset to clear a + * "stuck" CL job. + */ +#define DEFAULT_JS_RESET_TICKS_CL (55) /* 5.5s */ + +/* + * Default minimum number of scheduling ticks before the GPU is reset to clear a + * "stuck" job during dumping. + */ +#define DEFAULT_JS_RESET_TICKS_DUMPING (15020) /* 1502s */ + +/* + * Default number of milliseconds given for other jobs on the GPU to be + * soft-stopped when the GPU needs to be reset. + */ +#define DEFAULT_RESET_TIMEOUT_MS (3000) /* 3s */ + +/* + * Default timeslice that a context is scheduled in for, in nanoseconds. + * + * When a context has used up this amount of time across its jobs, it is + * scheduled out to let another run. + * + * @note the resolution is nanoseconds (ns) here, because that's the format + * often used by the OS. + */ +#define DEFAULT_JS_CTX_TIMESLICE_NS (50000000) /* 50ms */ + +#endif /* _KBASE_CONFIG_DEFAULTS_H_ */ + |