index
:
working/broadcom/kernel.git
llct/capri-support
master
public-review/ARM-bcm_defconfig-Do-not-expect-appended-DTB
public-review/ARM-dts-Leave-sdio1-as-disabled-on-bcm28155-ap
public-review/ARM-dts-bcm28155-ap-Fix-Card-Detection-GPIO
public-review/Add-Broadcom-Kona-I2C-Support-v2-on-v3.13-rc2
public-review/Add-Broadcom-Kona-PWM-Support-v1
public-review/Add-Broadcom-Kona-PWM-Support-v1-on-v3.12-rc2
public-review/Add-Broadcom-Kona-PWM-Support-v2
public-review/Add-Broadcom-Kona-PWM-Support-v5
public-review/Enable-I2C-on-bcm-28155-ap
public-review/Improve-support-for-deferred-regulators-v2
public-review/Set-n_voltages-for-linear-reg
public-review/Try-other-signal-levels-during-power-up-v2
public-review/Update-Kona-drivers-to-use-clocks-v4
public-review/Update-bcm_defconfig
public-review/Use-mmc-core-regulator-infrastucture
public-review/clocksource-kona-Print-warning-rather-than-panic
pull/spear-clocksource-init
review/ARM-DT-Add-missing-UARTs-for-bcm11351-bcm281xx
review/ARM-bcm281xx-Board-specific-reboot-code-v1
review/ARM-bcm281xx-Board-specific-reboot-code-v2
review/ARM-bcm281xx-Board-specific-reboot-code-v3
review/ARM-bcm281xx-GPIO-driver-v1
review/ARM-bcm281xx-TMON-driver-v1
review/ARM-bcm281xx-TMON-driver-v2
review/ARM-bcm281xx-adding-bcm28155-ap-dts-v1
review/ARM-bcm281xx-thermal-v1
review/ARM-bcm281xx-thermal-v2
review/ARM-bcm281xx-turn-on-l2-cache-v1
review/ARM-bcm281xx-turn-on-socket-network-support-v1
review/ARM-dts-bcm28155-ap-Fix-Card-Detection-GPIO
review/Add-Broadcom-Kona-I2C-Support-v1
review/Update-Kona-drivers-to-use-clocks-v1
review/Update-Kona-drivers-to-use-clocks-v2
review/arm-configs-bcm-remove-debug-ll-v1
review/bcm-bus-clk-v5
review/bcm-bus-clk-v6
review/bcm-smp-v4
review/bcm-smp-v5
review/bcm-smp-v6
review/bcm281xx-udc-v1
review/bcm281xx-udc-v3
review/bcm281xx-udc-v4
review/bcm281xx-udc-v5
review/bcm281xx-udc-v9
review/bcm2835
review/bcm59056-pmu-v1
review/bcm59056-pmu-v2
review/bcm59056-pmu-v3
review/bcm59056-pmu-v4
review/bcm59056-pmu-v5
review/bcm59056-reboot-fix
review/bcm590xx-add-addtl-regulators-v1
review/bcm590xx-add-addtl-regulators-v2
review/capri-boot-3.15-v1
review/capri-smp
review/clang-asm
review/do_syslog_tweak
review/dw8250_clock
review/dw8250_clock-v2
review/dw8250_clock-v3
review/enable-method-bindings-v3
review/enable-method-bindings-v4
review/gpio-centralize-locking-v1
review/gpio-fix-parameter-v1
review/gpio-get-v1
review/gpio-get-v2
review/gpio-irq-handler-v1
review/gpio-setup-message
review/gpio-unsigned-fix-v1
review/hawaii-v1
review/hawaii-v2
review/minor-printk-fixes
review/minor-printk-fixes-v2
review/mmc-card-event
review/mmc-for-tkryger-v2
review/mmc-for-tkryger-v3
review/mmc-for-tkryger-v4
review/mmc-sdhci-bcm-kona-fix-nonremovable-test-v1
review/mmc-sdhci-bcm-kona-linker-section-warning-v1
review/mmc-sdhci-bcm-kona-make-warning-go-away-v1
review/more-printk-flags
review/more-printk-flags-v2
review/printk-flags-v6
review/printk-flags-v7
review/sdhci-cd
review/sdhci-cd-v2
review/sdhci-cd-v3
review/serial-8250_dw-Improve-unwritable-LCR-workaround-v2
review/watchdog-v1
rfc/watchdog-resolution
wip/bcm59056-pmu-v3
Broadcom Landing Team Kernel
about
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
drivers
/
scsi
/
pm8001
/
pm8001_init.c
Age
Commit message (
Expand
)
Author
2014-06-25
pm8001: Fix potential null pointer dereference and memory leak.
Maurizio Lombardi
2014-03-19
[SCSI] remove deprecated IRQF_DISABLED from SCSI
Michael Opdenacker
2014-03-15
[SCSI] pm80xx: Read saved WWN from NVMD for ATTO pm8001 based HBAs.
Bradley Grove
2013-12-02
[SCSI] pm80xx: Tasklets synchronization fix.
Nikith Ganigarakoppal
2013-12-02
[SCSI] pm80xx: Module author addition
Nikith Ganigarakoppal
2013-11-15
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jik...
Linus Torvalds
2013-10-25
[SCSI] pm80xx: Firmware logging support.
Anand Kumar Santhanam
2013-10-25
[SCSI] pm80xx: Phy settings support for motherboard controller.
Anand Kumar Santhanam
2013-10-25
[SCSI] pm80xx: Device id changes to support series 8 controllers.
Anand Kumar Santhanam
2013-10-14
SCSI: remove unnecessary pci_set_drvdata()
Jingoo Han
2013-08-26
[SCSI] pm8001: clean up unnecessary MSI/MSI-X capability find
Yijing Wang
2013-08-26
[SCSI] pm80xx: Fix for 32 bit compilation warning
Anand Kumar Santhanam
2013-07-05
[SCSI] pm8001: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)
Yijing Wang
2013-05-10
[SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device...
James Bottomley
2013-05-10
[SCSI] pm80xx: thermal, sas controller config and error handling update
Sakthivel K
2013-05-10
[SCSI] pm80xx: WWN Modification for PM8081/88/89 controllers
Sakthivel K
2013-05-10
[SCSI] pm80xx: Changed module name and debug messages update
Sakthivel K
2013-05-10
[SCSI] pm80xx: Firmware flash memory free fix, with addition of new memory re...
Sakthivel K
2013-05-10
[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant c...
Sakthivel K
2013-05-10
[SCSI] pm80xx: MSI-X implementation for using 64 interrupts
Sakthivel K
2013-05-10
[SCSI] pm80xx: Updated common functions common for SPC and SPCv/ve
Sakthivel K
2013-05-10
[SCSI] pm80xx: Multiple inbound/outbound queue configuration
Sakthivel K
2013-05-10
[SCSI] pm80xx: Added SPCv/ve specific ids, variables and modify for SPC
Sakthivel K
2013-02-22
[SCSI] pm80xx: fix for memory region free
Sakthivel K
2013-01-03
Drivers: scsi: remove __dev* attributes.
Greg Kroah-Hartman
2012-05-10
[SCSI] pm8001: raise host can queue
Mark Salyzyn
2012-02-29
[SCSI] libsas: async ata scanning
Dan Williams
2012-02-19
[SCSI] libsas: kill sas_slave_destroy
Dan Williams
2011-10-02
[SCSI] pm8001: remove pm8001_slave_{alloc|configure}
Dan Williams
2011-04-10
treewide: remove extra semicolons
Justin P. Mattock
2011-02-12
[SCSI] pm8001: simplify workqueue usage
Tejun Heo
2010-11-01
tree-wide: fix comment/printk typos
Uwe Kleine-König
2010-03-30
include cleanup: Update gfp.h and slab.h includes to prepare for breaking imp...
Tejun Heo
2010-01-18
[SCSI] pm8001: Use kzalloc for allocating only one thing
Julia Lawall
2009-12-10
[SCSI] pm8001: enable read HBA SAS address from VPD
jack wang
2009-12-10
[SCSI] pm8001: enhance error handle for IO patch
jack wang
2009-12-04
[SCSI] pm8001: Fixes for tag alloc, error goto and code cleanup
jack_wang
2009-12-04
[SCSI] pm8001: add SAS/SATA HBA driver
jack wang