index
:
working/broadcom/kernel.git
llct/capri-support
master
public-review/ARM-bcm_defconfig-Do-not-expect-appended-DTB
public-review/ARM-dts-Leave-sdio1-as-disabled-on-bcm28155-ap
public-review/ARM-dts-bcm28155-ap-Fix-Card-Detection-GPIO
public-review/Add-Broadcom-Kona-I2C-Support-v2-on-v3.13-rc2
public-review/Add-Broadcom-Kona-PWM-Support-v1
public-review/Add-Broadcom-Kona-PWM-Support-v1-on-v3.12-rc2
public-review/Add-Broadcom-Kona-PWM-Support-v2
public-review/Add-Broadcom-Kona-PWM-Support-v5
public-review/Enable-I2C-on-bcm-28155-ap
public-review/Improve-support-for-deferred-regulators-v2
public-review/Set-n_voltages-for-linear-reg
public-review/Try-other-signal-levels-during-power-up-v2
public-review/Update-Kona-drivers-to-use-clocks-v4
public-review/Update-bcm_defconfig
public-review/Use-mmc-core-regulator-infrastucture
public-review/clocksource-kona-Print-warning-rather-than-panic
pull/spear-clocksource-init
review/ARM-DT-Add-missing-UARTs-for-bcm11351-bcm281xx
review/ARM-bcm281xx-Board-specific-reboot-code-v1
review/ARM-bcm281xx-Board-specific-reboot-code-v2
review/ARM-bcm281xx-Board-specific-reboot-code-v3
review/ARM-bcm281xx-GPIO-driver-v1
review/ARM-bcm281xx-TMON-driver-v1
review/ARM-bcm281xx-TMON-driver-v2
review/ARM-bcm281xx-adding-bcm28155-ap-dts-v1
review/ARM-bcm281xx-thermal-v1
review/ARM-bcm281xx-thermal-v2
review/ARM-bcm281xx-turn-on-l2-cache-v1
review/ARM-bcm281xx-turn-on-socket-network-support-v1
review/ARM-dts-bcm28155-ap-Fix-Card-Detection-GPIO
review/Add-Broadcom-Kona-I2C-Support-v1
review/Update-Kona-drivers-to-use-clocks-v1
review/Update-Kona-drivers-to-use-clocks-v2
review/arm-configs-bcm-remove-debug-ll-v1
review/bcm-bus-clk-v5
review/bcm-bus-clk-v6
review/bcm-smp-v4
review/bcm-smp-v5
review/bcm-smp-v6
review/bcm281xx-udc-v1
review/bcm281xx-udc-v3
review/bcm281xx-udc-v4
review/bcm281xx-udc-v5
review/bcm281xx-udc-v9
review/bcm2835
review/bcm59056-pmu-v1
review/bcm59056-pmu-v2
review/bcm59056-pmu-v3
review/bcm59056-pmu-v4
review/bcm59056-pmu-v5
review/bcm59056-reboot-fix
review/bcm590xx-add-addtl-regulators-v1
review/bcm590xx-add-addtl-regulators-v2
review/capri-boot-3.15-v1
review/capri-smp
review/clang-asm
review/do_syslog_tweak
review/dw8250_clock
review/dw8250_clock-v2
review/dw8250_clock-v3
review/enable-method-bindings-v3
review/enable-method-bindings-v4
review/gpio-centralize-locking-v1
review/gpio-fix-parameter-v1
review/gpio-get-v1
review/gpio-get-v2
review/gpio-irq-handler-v1
review/gpio-setup-message
review/gpio-unsigned-fix-v1
review/hawaii-v1
review/hawaii-v2
review/minor-printk-fixes
review/minor-printk-fixes-v2
review/mmc-card-event
review/mmc-for-tkryger-v2
review/mmc-for-tkryger-v3
review/mmc-for-tkryger-v4
review/mmc-sdhci-bcm-kona-fix-nonremovable-test-v1
review/mmc-sdhci-bcm-kona-linker-section-warning-v1
review/mmc-sdhci-bcm-kona-make-warning-go-away-v1
review/more-printk-flags
review/more-printk-flags-v2
review/printk-flags-v6
review/printk-flags-v7
review/sdhci-cd
review/sdhci-cd-v2
review/sdhci-cd-v3
review/serial-8250_dw-Improve-unwritable-LCR-workaround-v2
review/watchdog-v1
rfc/watchdog-resolution
wip/bcm59056-pmu-v3
Broadcom Landing Team Kernel
about
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
drivers
Age
Commit message (
Expand
)
Author
2014-04-16
clocksource: sh_mtu2: Hardcode MTU2 clock event rating to 200
Laurent Pinchart
2014-04-16
clocksource: sh_mtu2: Set cpumask to cpu_possible_mask
Laurent Pinchart
2014-04-16
clocksource: sh_mtu2: Replace hardcoded register values with macros
Laurent Pinchart
2014-04-16
clocksource: sh_mtu2: Allocate channels dynamically
Laurent Pinchart
2014-04-16
clocksource: sh_mtu2: Replace kmalloc + memset with kzalloc
Laurent Pinchart
2014-04-16
clocksource: sh_mtu2: Add index to struct sh_mtu2_channel
Laurent Pinchart
2014-04-16
clocksource: sh_mtu2: Add memory base to sh_mtu2_channel structure
Laurent Pinchart
2014-04-16
clocksource: sh_mtu2: Constify name argument to sh_mtu2_register()
Laurent Pinchart
2014-04-16
clocksource: sh_mtu2: Split channel setup to separate function
Laurent Pinchart
2014-04-16
clocksource: sh_mtu2: Rename struct sh_mtu2_priv to sh_mtu2_device
Laurent Pinchart
2014-04-16
clocksource: sh_mtu2: Split channel fields from sh_mtu2_priv
Laurent Pinchart
2014-04-16
clocksource: sh_mtu2: Turn sh_mtu2_priv fields into local variables
Laurent Pinchart
2014-04-16
clocksource: sh_mtu2: Use request_irq() instead of setup_irq()
Laurent Pinchart
2014-04-16
clocksource: sh_tmu: Sort headers alphabetically
Laurent Pinchart
2014-04-16
clocksource: sh_tmu: Remove FSF mail address from GPL notice
Laurent Pinchart
2014-04-16
clocksource: sh_tmu: Rename clock to "fck" in the non-legacy case
Laurent Pinchart
2014-04-16
clocksource: sh_tmu: Add support for multiple channels per device
Laurent Pinchart
2014-04-16
clocksource: sh_tmu: Hardcode TMU clock event and source ratings to 200
Laurent Pinchart
2014-04-16
clocksource: sh_tmu: Replace hardcoded register values with macros
Laurent Pinchart
2014-04-16
clocksource: sh_tmu: Allocate channels dynamically
Laurent Pinchart
2014-04-16
clocksource: sh_tmu: Replace kmalloc + memset with kzalloc
Laurent Pinchart
2014-04-16
clocksource: sh_tmu: Add index to struct sh_tmu_channel
Laurent Pinchart
2014-04-16
clocksource: sh_tmu: Add memory base to sh_tmu_channel structure
Laurent Pinchart
2014-04-16
clocksource: sh_tmu: Constify name argument to sh_tmu_register()
Laurent Pinchart
2014-04-16
clocksource: sh_tmu: Split channel setup to separate function
Laurent Pinchart
2014-04-16
clocksource: sh_tmu: Rename struct sh_tmu_priv to sh_tmu_device
Laurent Pinchart
2014-04-16
clocksource: sh_tmu: Split channel fields from sh_tmu_priv
Laurent Pinchart
2014-04-16
clocksource: sh_tmu: Use request_irq() instead of setup_irq()
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Request IRQ for clock event device only
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Sort headers alphabetically
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Remove FSF mail address from GPL notice
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Rename clock to "fck" in the non-legacy case
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Add support for multiple channels per device
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Hardcode CMT clock source rating to 125
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Hardcode CMT clock event rating to 125
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Set cpumask to cpu_possible_mask
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Replace hardcoded register values with macros
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Split static information from sh_cmt_device
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Allocate channels dynamically
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Replace kmalloc + memset with kzalloc
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Add index to struct sh_cmt_channel
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Add memory base to sh_cmt_channel structure
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Rename mapbase/mapbase_str to mapbase_ch/mapbase
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Constify name argument to sh_cmt_register()
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Split channel setup to separate function
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Rename struct sh_cmt_priv to sh_cmt_device
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Split channel fields from sh_cmt_priv
Laurent Pinchart
2014-04-16
clocksource: sh_cmt: Use request_irq() instead of setup_irq()
Laurent Pinchart
2014-04-12
sym53c8xx_2: Set DID_REQUEUE return code when aborting squeue
Mikulas Patocka
2014-04-12
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds
[next]