index
:
working/broadcom/kernel.git
llct/capri-support
master
public-review/ARM-bcm_defconfig-Do-not-expect-appended-DTB
public-review/ARM-dts-Leave-sdio1-as-disabled-on-bcm28155-ap
public-review/ARM-dts-bcm28155-ap-Fix-Card-Detection-GPIO
public-review/Add-Broadcom-Kona-I2C-Support-v2-on-v3.13-rc2
public-review/Add-Broadcom-Kona-PWM-Support-v1
public-review/Add-Broadcom-Kona-PWM-Support-v1-on-v3.12-rc2
public-review/Add-Broadcom-Kona-PWM-Support-v2
public-review/Add-Broadcom-Kona-PWM-Support-v5
public-review/Enable-I2C-on-bcm-28155-ap
public-review/Improve-support-for-deferred-regulators-v2
public-review/Set-n_voltages-for-linear-reg
public-review/Try-other-signal-levels-during-power-up-v2
public-review/Update-Kona-drivers-to-use-clocks-v4
public-review/Update-bcm_defconfig
public-review/Use-mmc-core-regulator-infrastucture
public-review/clocksource-kona-Print-warning-rather-than-panic
pull/spear-clocksource-init
review/ARM-DT-Add-missing-UARTs-for-bcm11351-bcm281xx
review/ARM-bcm281xx-Board-specific-reboot-code-v1
review/ARM-bcm281xx-Board-specific-reboot-code-v2
review/ARM-bcm281xx-Board-specific-reboot-code-v3
review/ARM-bcm281xx-GPIO-driver-v1
review/ARM-bcm281xx-TMON-driver-v1
review/ARM-bcm281xx-TMON-driver-v2
review/ARM-bcm281xx-adding-bcm28155-ap-dts-v1
review/ARM-bcm281xx-thermal-v1
review/ARM-bcm281xx-thermal-v2
review/ARM-bcm281xx-turn-on-l2-cache-v1
review/ARM-bcm281xx-turn-on-socket-network-support-v1
review/ARM-dts-bcm28155-ap-Fix-Card-Detection-GPIO
review/Add-Broadcom-Kona-I2C-Support-v1
review/Update-Kona-drivers-to-use-clocks-v1
review/Update-Kona-drivers-to-use-clocks-v2
review/arm-configs-bcm-remove-debug-ll-v1
review/bcm-bus-clk-v5
review/bcm-bus-clk-v6
review/bcm-smp-v4
review/bcm-smp-v5
review/bcm-smp-v6
review/bcm281xx-udc-v1
review/bcm281xx-udc-v3
review/bcm281xx-udc-v4
review/bcm281xx-udc-v5
review/bcm281xx-udc-v9
review/bcm2835
review/bcm59056-pmu-v1
review/bcm59056-pmu-v2
review/bcm59056-pmu-v3
review/bcm59056-pmu-v4
review/bcm59056-pmu-v5
review/bcm59056-reboot-fix
review/bcm590xx-add-addtl-regulators-v1
review/bcm590xx-add-addtl-regulators-v2
review/capri-boot-3.15-v1
review/capri-smp
review/clang-asm
review/do_syslog_tweak
review/dw8250_clock
review/dw8250_clock-v2
review/dw8250_clock-v3
review/enable-method-bindings-v3
review/enable-method-bindings-v4
review/gpio-centralize-locking-v1
review/gpio-fix-parameter-v1
review/gpio-get-v1
review/gpio-get-v2
review/gpio-irq-handler-v1
review/gpio-setup-message
review/gpio-unsigned-fix-v1
review/hawaii-v1
review/hawaii-v2
review/minor-printk-fixes
review/minor-printk-fixes-v2
review/mmc-card-event
review/mmc-for-tkryger-v2
review/mmc-for-tkryger-v3
review/mmc-for-tkryger-v4
review/mmc-sdhci-bcm-kona-fix-nonremovable-test-v1
review/mmc-sdhci-bcm-kona-linker-section-warning-v1
review/mmc-sdhci-bcm-kona-make-warning-go-away-v1
review/more-printk-flags
review/more-printk-flags-v2
review/printk-flags-v6
review/printk-flags-v7
review/sdhci-cd
review/sdhci-cd-v2
review/sdhci-cd-v3
review/serial-8250_dw-Improve-unwritable-LCR-workaround-v2
review/watchdog-v1
rfc/watchdog-resolution
wip/bcm59056-pmu-v3
Broadcom Landing Team Kernel
about
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
fs
/
jffs2
/
scan.c
Age
Commit message (
Expand
)
Author
2012-01-09
mtd: do use mtd->point directly
Artem Bityutskiy
2012-01-09
mtd: introduce mtd_block_isbad interface
Artem Bityutskiy
2012-01-09
mtd: introduce mtd_unpoint interface
Artem Bityutskiy
2012-01-09
mtd: introduce mtd_point interface
Artem Bityutskiy
2011-09-11
jffs2: Avoid unneeded 'if' before kfree
Jesper Juhl
2011-05-25
JFFS2: retry large buffer allocations
Grant Erickson
2010-10-25
jffs2: Reduce excessive scan of empty blocks
Joakim Tjernlund
2010-05-19
jffs2: Use jffs2_garbage_collect_trigger() to trigger pending erases
David Woodhouse
2009-06-23
jffs2: fix another potential leak on error path in scan.c
David Woodhouse
2009-06-15
jffs2: leaking jffs2_summary in function jffs2_scan_medium
Christian Engelmayer
2008-05-01
[MTD][NOR] Add physical address to point() method
Jared Hulbert
2008-05-01
[JFFS2] Track parent inode for directories (for NFS export)
David Woodhouse
2007-10-13
[JFFS2] Handle dirents on the flash with embedded zero bytes in names.
David Woodhouse
2007-09-23
[JFFS2] Fix unpoint length
Andy Lowe
2007-07-10
[JFFS2] Whitespace cleanups.
David Woodhouse
2007-06-29
[JFFS2] Deletion dirents should be REF_NORMAL, not REF_PRISTINE.
David Woodhouse
2007-04-25
[JFFS2] Tidy up licensing/copyright boilerplate.
David Woodhouse
2007-04-25
[JFFS2] Better fix for all-zero node headers
Joakim Tjernlund
2007-04-17
[JFFS2] Speed up mount for directly-mapped NOR flash
Joakim Tjernlund
2007-04-17
[JFFS2] check node crc before doing anything else
Thomas Gleixner
2007-03-09
[JFFS2] Check for all-zero node headers
David Woodhouse
2007-02-09
[JFFS2] Use MTD_OOB_AUTO to automatically place cleanmarker on NAND
Artem Bityutskiy
2007-01-10
[JFFS2] Reschedule in loops
Artem Bityutskiy
2007-01-02
[JFFS2] Fix error-path leak in summary scan
Amit Choudhary
2006-12-10
[JFFS2] replace kmalloc+memset with kzalloc
Yan Burman
2006-06-29
fs/jffs2/: make 2 functions static
Adrian Bunk
2006-06-27
[JFFS2][XATTR] rid unnecessary writing of delete marker.
KaiGai Kohei
2006-06-27
[JFFS2][XATTR] using 'delete marker' for xdatum/xref deletion
KaiGai Kohei
2006-05-30
[JFFS2] Fix calculation of potential summary marker offset on NOR flash.
David Woodhouse
2006-05-29
[JFFS2] Preallocate raw_node_refs in a couple of missing places in scan
David Woodhouse
2006-05-25
[JFFS2] Fix 64-bit size_t problems in XATTR code.
David Woodhouse
2006-05-25
[JFFS2] Fix and improve debugging output during scan.
David Woodhouse
2006-05-25
[JFFS2] Add 'jeb' argument to jffs2_prealloc_raw_node_refs()
David Woodhouse
2006-05-25
[JFFS2] Allocate node_ref for wasted space when skipping to page boundary
David Woodhouse
2006-05-24
[JFFS2] Introduce ref_next() macro for finding next physical node
David Woodhouse
2006-05-24
[JFFS2] Reduce visibility of raw_node_ref to upper layers of JFFS2 code.
David Woodhouse
2006-05-22
[JFFS2] Extend jffs2_link_node_ref() to link into per-inode list too.
David Woodhouse
2006-05-21
[JFFS2] Discard remaining free space when filing a dirty block in scan.
David Woodhouse
2006-05-21
[JFFS2] Introduce jffs2_scan_dirty_space() function.
David Woodhouse
2006-05-21
[JFFS2] Fix memory leak in scan code; improve comments.
David Woodhouse
2006-05-21
[JFFS2] Correct handling of JFFS2_FEATURE_RWCOMPAT_COPY nodes.
David Woodhouse
2006-05-20
[JFFS2] Introduce jffs2_link_node_ref() function to reduce code duplication
David Woodhouse
2006-05-20
Merge git://git.infradead.org/jffs2-xattr-2.6
David Woodhouse
2006-05-20
[JFFS2] Optimise reading of eraseblock summary nodes
David Woodhouse
2006-05-19
[JFFS2] Remove forgotten summary code
Ferenc Havasi
2006-05-19
Merge git://git.infradead.org/mtd-2.6
KaiGai Kohei
2006-05-15
[PATCH] jffs2: memory leak in jffs2_scan_medium()
Florin Malita
2006-05-13
[JFFS2][XATTR] Remove 'struct list_head ilist' from jffs2_inode_cache.
KaiGai Kohei
2006-05-13
[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)
KaiGai Kohei
2006-03-08
[PATCH] jffs2: avoid divide-by-zero
David Woodhouse
[next]